GREASES AND LUBRICANTS AUTO
GREASES & LUBRICANTS
Lubricating Grease WGF 130 Art. No. 0893 530
Rust Remover BOLTEX Art. No. 0893 250 250
Maintenance oil Multi Cobra Art. No. 0893 055 400
• High-performance for lubricating rolling and plain bearings, guides, joints, splined shafts, threaded spindles as well as bearings •W ith extremely high surface pressures or impact loads
• Mineral oil-free, high-tech rust remover • Precise spraying for economical dispensing • Spray the entire area to clean the surface • E ffective at penetrating rusted connections • Simplifies loosening seized bolts and nuts
• Lubricates, cleans and maintains •S tops creaking and squeaking and restores sliding properties of seized and jammed parts • R emoves rust and protects against corrosion • P enetrates and displaces moisture around electronics and electrics
Adhesive lubricant HHS® 2000 Art. No. 0893 106
Adhesive lubricant HHS® Fluid Art. No. 0893 106 4
Adhesive lubricant HHS® Lube Art. No. 0893 106 5
• P artly synthetic oil that is extremely resistant to high pressures • R eliable protection against corrosion • E xtraordinarily tear-proof lubricating film with excellent noise and vibration dampening • R esistant to splashed water, salt water, weak acids and alkalis Silicone-free, resin-free and acid-free
•C entrifuge-proof low-viscosity grease with dual effect: Penetrating properties of an oil, adhesive and pressure-resistant as grease • R esistant to spray water and salt water
• L ong-life spray grease with a high protective factor against weathering and environmental influences under extreme pressure •M inimises wear and substance loss of lubricating points • L ow adhesion of dust and dirt • R esistant to spray water and salt water – Lubricant does not wash off
Adhesive lubricant HHS® Grease Art. No. 0893 106 7
Gear-Wheel spray Art. No. 0893 100 5
•H igh-quality, white, long-life maintenance grease with PTFE • E xcellent sealing behaviour against moisture and dirt • R eliable wear protection – contains solid lubricant (PTFE) •D ry-running properties due to PTFE • R esistant to spray water and salt water
•B lack, shear-resistant, high-pressure resistant special lubricant •N oise-and vibration-damping • P enetrates moisture and protects against corrosion • R esistant to spray water and salt water
2
GREASES AND LUBRICANTS FOR AUTO
High-temperature lubricant paste HSP 1400 Art. No. 0893 123 • Metal-free lubricant paste that reduces wear, separates surfaces reliably and provides outstanding corrosion protection • High compressive strength • I deal as separating paste for stainless steel screw connections • R esistant to water, salt water, diluted acids and alkalines
Copper spray CU 800 Art. No. 0893 800
Copper paste CU 800 Art. No. 0893 800 2
• Temperature application range from –40°C to +1200°C for dry lubrication • R esistant to water, diluted alkalis and diluted acids • Provides long-lasting protection against burning-on and seizing, galling, wear, corrosion and frictional corrosion.
• Highly adhesive lubricating, separating and anti-corrosive copper paste • R esistant to water, diluted lyes and acids
HHS 5000 Extremely temperature-resistant, fully synthetic penetrating oil with PTFE (Teflon®)
Penetrates through to where lubricating is needed due to excellent creep
Temperature range: –20°C to +200°C
Reliable wear protection – contains solid lubricant (PTFE) Once the grease film has been stripped, lubrication is taken over by PTFE (dry-running properties) Lasting anti-slip protective film under high temperature loads
Resistant to salt water
Suitable for lubrication in small gaps at marine engines, pumps, bearings, e.g. Adhesive lubricant HHS® 5000 Art. No. 0893 106 3
3
GREASES AND LUBRICANTS FOR AUTO
GREASES AND LUBRICANTS AUTO
Würth Ltd Würth Centre Mdina Road Zebbug, ZBG 9016 Tel: (+356) 2149 4604 e- mail: sales@wuerth.com.mt https://eshop.wuerth.com.mt
No reproduction without prior permission.
© Würth Limited (Malta). Marketing : MP042.20 - MARITIME. All rights reserved.
We reserve the right to make any changes we deem necessary to improve the quality of the product, even without prior consent or notification in the technical field leading to the improvement of the articles’ quality, as well as changes of design, model and color. While stocks last. Illustrations may be example illustrations that may differ in appearance from the goods supplied. Errors excepted. We shall not be liable for any printing errors or misprints. Our general terms and conditions apply.