Food Safe Products by Wurth-MT

FOOD SAFE PRODUCTS

SILICONE ACETATE FOOD GRADE

X Tried-and-tested product features.

Special, high-quality sealant for sealing in food

Color transparent white stainless steel silver

Cont. in ml 310 310 310 310

Art. No. 0892 550 1 0892 550 2 0892 550 3 0892 550 4

P. Qty. 12 12 12 12

The colors shown can differ from the original for printing-related reasons.

Technical Data: Raw material base Max. take-up of contin. movement Skin formation time Curing speed Thermal stability Application temperature Can be painted over Compatibility with paint Contains fungicide Shore A hardness Density Elongation at rupture with 2 mm film

acetate-curing silicone polymer 25% of the joint width approx. 10 min. at 23°C/50% rel. humidity approx. 2-3 min. after 24 hrs. at 23°C/50% rel. humidity –40°C to +180°C +5°C to + 40°C no yes, preliminary tests required no approx. 25 1.04 g/cm3 approx. 575%

Note:

Typical surfaces:

Complies with building material class B2 according to DIN 4102. Due to the large number of existing paint systems, the user should conduct his/her own tests to check the compatibility with paint. Danger of yellowing on contact with white alkyd resin paints cannot be excluded. Not suitable for non-ferrous metals and metals without corrosion protection. Silicone Acetate Food Grade is not suitable for adhesive bonding or filling hollow spaces.

Without primer: Enamel, tiles, glass, anodized aluminum, stainless steel, CORIAN® 1) and VARICOR® 2). With Primer Art. No. 0892 170: Aluminum (bare, powder-coated), chrome, hard PVC, wood (bare, painted and glazed).

CORIAN® is a registered trademark of E.I. DU PONT DE NEMOURS & CO., Wilmington, Delaware, USA. 2) VARICOR® is a registered trademark of Varicor S.A., Wisches, FR.

MWF - 03/10 - 04566 - © •

This information is only a recommendation based on our experience. Preliminary testing required.

Silicone Primer Art. No. 0892 170 Cartridge Gun Art. No. 0891 … Joint Smoother Art. No. 0891 181 Cartridge Knife Art. No. 0715 66 09 Sealant Smoothing Agent Art. No. 0893 3 / 0893 003 PE Backfill Material Art. No. 0875 …

Your advantages: ● Corresponds to the requirements pursuant to NSF/ANSI Standard 61 ˈ Officially listed since March 2007. ● Sensor testing for food ˈ Tested by Stegmann laboratory. ● Can be used in food handling and processing operations ˈ Tested by the ISEGA-Forschungs- und Untersuchungsgesellschaft mbH in Aschaffenburg, Germany. ● In aquarium construction ˈ Tested pursuant to DIN 32622. ● Can be used in drinking water sector ˈ KTW test from Hygiene Institute of the German Ruhr region in Gelsenkirchen. ● In drinking water line sector ˈ DVGW Worksheet W 270 – Hygiene Institute of the University of Bonn in Bonn, Germany. ● Resistant to microoganisms ˈ Tested according to DIN EN ISO 846, Part A+C by the Institute for Air Hygiene in Berlin. ● In clean room ˈ Suitability in clean rooms in accordance with Hygiene Institute of the German Ruhr region, Test Report W-169517-08SI. Broad adhesive range. Your advantage: Adhesion on many surfaces which occur in the food processing sector. 10-year guarantee* on resistance to weathering, UV and aging and on color-fastness. Your advantage: High level of safety.

X Other advantages:

● High resistance to chemicals. ● Also adheres to Corian and Varicor. ● Good smoothing behavior.

Areas of application:

For sealing joints that come into contact with drinking water or food, e.g. in commercial kitchens, butcher shops, breweries, sales counters and walk-in refrigerators.

Suitable for aquarium construction.

Use as aquarium silicone: A = Adhesive bond B = Double joint The right dimensioning – whether it’s an adhesive bond or a double joint – is dependent on the type of glass elements used. When executing a double joint, the joint width should be at least 5 mm. A permanent adhesive bond can only be ensured after thoroughly cleaning the glass. For aquariums with a maximum filling volume of 1,350 liters. * This 10-year guarantee applies exclusively to product properties of resistance to weathering, UV, aging and to color-fastness. The function cannot be guaranteed, as this is dependent on proper application.

Application: Please observe overview sheet “General Notes on Application for Sealants”.

MULTI PLUS

Can be used in areas in which food is processed or stored. NSF H11

Synthetic, physiologically safe multi-function spray with high-end properties for universal use.

For the lubrication and maintenance of connecting joints, chains, seals and moving parts in automotive engineering, as well as critical areas of the food, pharmaceutical, printing and paperindustries. As a release agent, for corrosion protection and for all applications in which the use of conventional products on a mineral oil basis or of critical additives and solvents is not desired. Pre-clean the surface that is to be treated. Spray on evenly from a distance of approx. 20 cm.

MWF - 06/08 - 07956 - © •

If used in areas in which food is processed or stored, only the technically necessary minimum quantity may be used. If the product is to be used as a corrosion protection film, it must completely be removed before the corresponding device is again put into service.

0.83 g/cm3 –50°C to +210°C 32mm2/s

This information is only a recommendation based on our experience. Preliminary testing required.

Lubricant system n 3 Oil

n Grease

n Paste

n Dry lubricant

t t

Synthetic oil with multi-functional additive combination colorless

NSF H1 registered (No.: 135925), corresponds to the requirements of USDA 1998 H1.

Use:

Color Density at 20°C (active substance) Temperature range Basic oil viscosity at 40°C

Colorless, non-discoloring. Your advantages: l Can be used on bright backgrounds. l No discoloration in the case of occasional contact with the product.

Areas of application:

No danger symbols such as Xi, Xn, F, F+ or N. Your advantages: l Suitable for use in physiological and ecologically sensitive areas. l Low danger potential. l Safe working.

Free from white oil / mineral oil. Good material compatibility. Resin, acid and silicone-free.

P. Qty. 1/12

Technical data Chemical basis

One product for a wide spectrum of applications. Your advantages: l Rust penetrating agent with creeping properties. l Wear reducing lubricant. l Good long-term corrosion protection. l Reliable release agent.

Art. No. 0893 056

come into contact with food for technical reasons.

Cont. in ml 400

l In this context, the product may

n Corrosion protection

NSF = Internationally recognized organisation for the supervision and registration of products used in the food sector.

t t

Gentle and protective oil. Your advantages: l Creates an evenly glossy surface. l Water-repellant protective film prevents renewed contamination.

Cerfied for use near foodstuffs. Your advantage: l Suitable for use in food processing operations such as catering kitchens, cafeterias, slaughterhouses, etc.

Economical. Your advantage: l Cost-effective – particularly, if the product is used in daily routine cleaning.

AOX and silicone free.

Gentle, creamy emulsion with cleaning effect. Your advantages: l Dirt, polishing and wiping streaks as well as oily fingerprints are removed thoroughly. l Suitable for use on vertical surfaces.

STAINLESS STEEL CARE OIL

Quick and problem-free use. Your advantages: l Removes light dirt, dust, polishing streaks and greasy fingerprints. l Suitable for daily care.

AOX and silicone free.

Quick and simple improvement of the appearance of metal surfaces Contents ml 400

Art. No. 0893 121 0

Pack Qty. 1/12

Instructions for use: If necessary, remove coarse dirt with Stainless Steel Care Oil, Art. No. 0893 121 2. Spray a thin coat onto the dry surface and polish with a soft, dry cloth. Do not rub dry!

Note: Certified for use near foodstuffs. Avoid direct contact with foodstuffs. Do not spray onto hot surfaces and do not apply in direct sunlight.

STAINLESS STEELCARE SPRAY Cleaning and care emulsion for metallic surfaces Contents ml 400

Art. No. 0893 121

Pack Qty. 1/12

Instructions for use: Remove coarse dirt with Stainless Steel Power Cleaner, Art. No. 0893 121 2. Spray a thin coat onto the dry surface and thoroughly wipe off with a soft cloth.

Note:

MWF - 12/00 - 07284 - © •

Certified for use near foodstuffs. Avoid direct contact with foodstuffs. Do not spray onto hot surfaces and do not apply in direct sunlight.

MULTICLEAN

Can be used in areas in which food is processed or stored. NSF H11

Fluid for cleaning and temporary lubrication in physiologically and ecologically sensitive areas.

l In this context, the product may

Good cleaning and degreasing performance. Your advantage: l Removes oils, resin encrustations and silicone residues.

Suitable for use in physiologically and ecologically sensitive areas. Your advantage: l Safe working.

Good material compatibility.

Acetone free

come into contact with foodstuffs for technical reasons.

AOX and silicone-free. 1

Content in ml 400

Art. No. 0890 109 6

P. Qty . 1/12

Technical data Chemical basis

Applications: For residue-free cleaning and degreasing during assembly and maintenance work on machines, aggregates and tools in critical areas of the printing and paper industries as well as for applications in which the use of easily and highly inflammable cleaners is not desired.

Application:

Colour Density at 20°C (active substance) Flash point

Aliphatic hydrocarbons Colourless 0.77 g/cm3 40 °C

NSF H1 registered (No.: 135926), corresponds to the requirements of USDA 1998 H1.

Spray from a distance of approx. 20 cm on to the parts that are to be cleaned and allow to dry.

MWF - 12/04 - 07958 - © •

If used in areas in which food is processed or stored, only the technically necessary minimum quantity may be used.

This information is only a recommendation based on our experience. Preliminary testing required.

NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector. VbF = Ordinance concerning Combustible Liquids (no longer valid as from 01.01.2004), has been replaced by the BetrSichV [Operational Safety Ordinance] (valid as from 03.10.2002)

FOOD SAFE LUBRICATING OIL

Can be used in areas in which food is processed or stored. NSF 1 H1 registered LGA 2 approved

Creeping, colourless specialised lubricant for the food industry and for the beverage, medical and clinical fields.

l Occasional contact with food can

t t

Heat resistant, –10°C to +180°C.

Good material compatibility. Your advantage: l A wide variety of uses on a variety of surfaces, such as aluminium, stainless steel, mineral oil-compatible plastics such as PP, PE, PS and Nylon, polycarbonate glass, epoxy glass-reinforced laminate and sealing rings.

Water displacing.

Best possible corrosion-protection properties.

Aerosol can

Cont. Art. No. P. in ml Qty. 300 0893 1071 1/6

Tasteless and odourless.

Resin- and acid-free.

Designation

Resistant to aging. Silicone- and AOX-free.

Use: For the liquid lubrication of valve seals, sleeves, O-rings, drives, piston shafts and guides of pushers, hinged belt chains, roller chains and mechanisms in the foodstuff and beverage industries. Lubrication of cutting blades in the paper industry and needles and hooks of knitting machines. Versatile applications for the production, processing and packaging of food products and pharmaceutical and cosmetic products. Slide effect also retained with machines and conveyances subjected to water. Can be used as an excellent release agent in the foodstuff and beverage industries.

Technical data Chemical basis Flash point Density Viscosity Colour

Application: Clean and degrease the parts to be lubricated. Then spray on a thin layer.

Medicinal white oil according to DAB 10 3 200°C 0.86 g/ml (20°C) 31 mm2/s (20°C) 14 mm2/s (40°C) transparent

This information is only a recommendation based on our experience. Preliminary testing required.

Lubricant system 3 n Oil

n Grease

n Paste

n Dry lubricant

n Corrosion protection

Thin, creeping, colourless specialised lubricant. Your advantages: l Outstanding lubrication qualities in hard to reach places thanks to low viscosity. l Excellent creeping and cleaning effect ensures the best protection of machines and conveyances subject to water stress. l Efficient in use. l No optical impairment with occasional contact between lubricant and product.

occur here. Not at all harmful to skin or mucous membrane. Non-toxic.

NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector. LGA = Bavarian State Office of Commerce, Nuremberg DAB 10 = German Pharmacopoeia 10th Edition

FOODSTUFFS HHS

Can be used in areas in which food is processed or stored. NSF H11 registered

Creepable, watertight, synthetic adhesive lubricant.

l In this context, the product may

t t

Good adhesive properties. Your advantages: l Wide range of applications, e.g. on vertical lubricating points. l Resistant to centrifugal forces on turning and rotating parts. Provides long-lasting protection against corrosion, especially of non-ferrous metals. Water resistant. Resin and acid-free. Silicone and AOX-free.

t t t

Very good creepability. Your advantages: l Lubrication of hard-to-reach areas. l Penetration of very tight spaces and tolerances.

come into contact with food for technical reasons.

Designation Foodstuffs HHS

Cont. in ml 500

Art. No. 0893 107 6

Areas of application: Suited for universal lubrication at high pressure loads, e.g. for chains, racks, joints, levers, bearings, sliding points, cables, open drives, and hinges.

Use: Clean the lubricating point and then apply where required.

MWF - 10/08 - 11125 - © •

If used in areas in which food is processed or stored, only the technically necessary minimum quantity may be used.

With this information, we want to advise you to the best of our knowledge based on our tests and experience. We shall assume no liability for the application results in individual cases, however, due to the large number of applications and the storage and application conditions that lie outside the scope of our influence. This also applies to the use of the non-binding technical and

P. Qty. 1/12

Technical data Chemical basis Color Viscosity after the evaporation of the solvent at +40°C

Synthetic oil with multi-functional additive combination Colorless 1251cSt

NSF H1 registered (No.: 140816), corresponds to the requirements of H1, 1998.

commercial customer service we provide. We always recommend that you conduct your own tests. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

NSF International Corporation Michigan = Internationally recognized organization for the supervision and registration of products used in the food sector.

t t

Use of natural alumina as abrasive substance. Your advantages: l Supports effective cleaning due to different grain sizes. l Spherical shape and hardness1 of alumina assure gentle, mild yet powerful cleaning.

Protective additives with re-greasing characteristics. Your advantages: l Creation of a smooth and water-repellant surface finish. l Renewed dirt deposits are effectively prevented.

Highly viscous. Your advantage: l No run-off from vertical surfaces.

Tested for usability in food processing. Your advantage: l Safe for use in food processing plants, such as canteens, cafeterias, abattoirs, food transports, etc.

Not subject to mandatory labeling according to harmful substance decree.

Made with natural raw materials.

t t

METAL RESTORER

Contains activated citric acid. Your advantage: l Stubborn contaminations, such as metal oxidation, rust film, verdigris, lime and boiler scale are removed thoroughly and gently.

pH-value: 1.6.

Metal grinding paste for removal of the most stubborn contaminations from metal.

before

after Contents g 400

P. Qty. 1/12

Art. No. 0893 121 1

Instructions for use: Apply sparingly to the surface to be cleaned. Using a damp cloth, polish evenly in a circular motion. Treat the entire surface. Rinse with water to clear all residue.

Areas of application: Metal surfaces of stainless steel, chromium, brass, copper, aluminum, gold and silver. Suitable for use in vehicles, in technical equipment, in the household and in food processing. Also suitable for glass and glass ceramics.

MWF - 12/00 - 07283 - © •

Note: Avoid direct contact with foodstuffs. Do not use on anodized aluminum and galvanized or enameled surfaces.

Recommendation: Pre-clean with Stainless Steel Power Cleaner, Art. No. 08931212. Stainless Steel Care Oil, Art. No. 0893 121 0, will optimize the cleaning and care effect and result in a perfect surface finish. 1

Mohs’ hardness scale Talc Gypsum Apatite Quartz Alumina (abrasive) Sapphire Diamond

1 2 5 7 8 9 10

Density: 1.4 kg/l.

Stainless Steel Power Cleaner Art. No. 0893 121 2 Stainless Steel Care Oil Art. No. 0893 121 0

t t

Certified for use near foodstuffs. Your advantage: l Recognized as safe for use in food processing, such as catering kitchens, cafeterias, slaughterhouses, food transports, etc.

Contains no phosphates, organic solvents or caustic substances. Your advantages: l Reduces danger potential in daily handling. l Minimizes burden on the environment. l Meets local waste water regulations. l Not subject to identification under Dangerous Substance Decree.

Gentle on material. Your advantage: l Non-aggressive to paintwork, rubber, plastics and seals.

Biological degradability > 95%.

Colourless and odourless.

pH-value undiluted: 9.0 – 9.5.

STAINLESS STEEL POWER CLEANER

Powerful removal of oil and grease. Your advantages: l Contaminations such as boring or cutting oil and other processing residue are removed thoroughly. l Optimal preparation for further refinishing, cleaning and care. l Very economical.

AOX and silicone free.

Special cleaning fluid for preliminary cleaning of metal surfaces

Drain cock for 5-l canister Art. No. 0891 302 01

Pack Qty. 1

Contents 500 ml 5l

Art. No. 0893 121 2 0893 121 205

Pack Qty. 1/12 1

Instructions for use: Areas of application:

MWF - 12/00 - 07282 - © •

For stainless steel, chrome, brass, anodized and enameled surfaces, as well as light and nonferrous metals on vehicles, boats and other applications, in household and in the food processing industry.

Note: Avoid direct contact with foodstuffs.

Spray onto the contaminated surface, allow to react briefly and wipe thoroughly with a clean cloth. If necessary, use a sponge or soft brush to intensify cleaning.

Recommendation: Treatment with Stainless Steel Care Oil, Art. No. 0893 121 0, optimizes the cleaning and care effect and results in a perfect surface finish.

Stainless Steel Care Oil Art. No. 0893 121 0 Metal Refinisher Art. No. 0893 1211

Stainless Steel Cleaner Special purpose cleaning fluid for the initial cleaning of metal surfaces. Contents 500 ml

Art. No. Pack/Qty 893.121.2 1

Advantages: z

Application:

Spray onto the soiled surface. leave to act for a short time and thoroughly clean with cloth. Note: Avoid direct contact with foodstuffs.

Stainless Steel Safeguard Oil Fast, simple and visible preparation of metallic surfaces. Contents 400 ml

Art. No. Pack/Qty 893.121.0 1

Application:

For use after removal of soiling with stainless steel cleaner or metal restorer. Spray a thin film on the dry surface. Polish with a soft and dry cloth. Do not rub dry. Note: Tested for use in food processing plants, avoid direct contact with food stuffs. Do not spray on hot surfaces or use in direct sun light.

For cleaning of stainless steel, chromium, brass, anodised and enamelled surfaces, light alloy and non-ferrous heavy metal. Use on vehicles, boat building, household, technology and food processing plants. Removes soiling such as drilling oil, cutting fluid, dust and process residues. Does not contain any phosphates, organic solvents or etchants.

Advantages: z

z z

Removes slight soiling like dust, cleaning smears and strong fingerprints. Suitable for daily care. Produces a uniform glossy surface and a water repellent film.

SILICON FLUID

Can be used in areas in which food is processed or stored. NSF H11

High-quality, physiologically safe anti-friction and release agent. t

Contains highly concentrated, highquality silicone oils. Your advantages: l Optimum anti-frictional and lubricating properties. l Prevents sticking. l Eliminates unpleasant squealing noises. l Prevents wear.

Extremely good temperature resistance from -50°C to + 250°C. Your advantage: l Wide field of application, also in the field of high temperatures and as a mould release agent.

Colourless, non-discolouring. Your advantages: l Can be used on bright backgrounds l No discolouration in the case of occasional contact with the product.

Safety product. Your advantages: l Especially user-friendly and safe handling. l Improved workplace safety and health protection. l Reduced marking with danger symbols.

come into contact with foodstuffs for technical reasons.

Good material compatibility.

Content in ml Art. No. 400 0893 221 000

l In this context, the product may

Moisture repellent, protects e. g. rubber parts against frost.

P. Qty. 1/12

Technical data Chemical basis

Applications: As an antifriction agent and for the lubrication of all moving parts of machines, especially in the field of plastics, in automotive engineering, in the food, pharmaceutical, printing and paper industries. Also as a mould release agent in the plastics processing industry and for the protection and care of surfaces.

Colour Density at 20°C (active substance) Temperature range Basic oil viscosity at 25°C

–50°C to +250°C 350 mm2/s

Pre-clean the surface that is to be treated. Spray on evenly from a distance of approx. 20 cm.

MWF - 11/04 - 07957 - © •

0.97g/cm3

NSF H1 registered (No.: 135927), corresponds to the requirements of USDA 1998 H1.

Application:

Physiologically safe synthetic oil Colourless

This information is only a recommendation based on our experience. Preliminary testing required.

Lubricants system 3 Oil n

n Fat

n Paste

n Dry lubricant

n Corrosion protection

NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector.

MULTI-PURPOSE GREASE III/IV

Can be used in areas in which food is processed or stored. NSF H11 l In this context, the product may

come into contact with foodstuffs for technical reasons.

MULTI-PURPOSE GREASE III

t t t

t t

Physiologically safe, colourless grease with multifunctional additive combination.

Multi-Purpose Grease IV Art. No. 0893 107 003

For the lubrication and care of machines, plain bearings and anti-friction bearings, for longterm lubrication in wet rooms and areas as well as in critical areas in the food, pharmaceutical, printing and paper industries.

For the lubrication of machines, plain bearings and anti-friction bearings, even under extreme conditions such as high temperatures, high pressures, shock and impact stresses and the influence of water.

Soap base Colour NLGI class (DIN 51818) Temperature range

anorganic transparent 2 –20° to +150°C

Basic oil viscosity at 40°C Drop point (DIN ISO 2176) Worked penetration (DIN ISO 2137) Corrosion protection (SKF Emcor-Test, DIN 51802) VKA welding load (DIN 51350) Designation to DIN 51502

100 mm2/s none 285

AL complex white 2 –45°C to +180°C (for short periods up to +200°C) 350 mm2/s > 250 285

0 1800 N KP2N-20

0 3000 N KPFHC2R-40

Applications

MWF - 11/04 - 07959 - © •

Note: Greases are delivered in plastic cartridges! The plastic cartridges improve storage (they prevent the grease from oozing out in high temperature conditions). Store cartridges upright in a cool, dry place!

The operating instructions of the vehicle, machinery and aggregate manufacturers must be observed! For further information see the technical information leaflet. This information is only a recommendation based on our experience. Preliminary testing required.

Synthetic high-performance grease with white solid lubricants. t

Multi-Purpose Grease III Art. No. 0893 107 002

MULTI-PURPOSE GREASE IV

t t

Technical data

Art. No. P. Qty. 0893 107 002 1/24 0893 107 003 1/24

Cont. in g

NSF H1 registered (No.: 135924), corresponds to the requirements of USDA 1998 H1.

High-pressure resistant through EP additive. Very good antiseizing properties. Good sealing and good corrosion protection. Very good dust-repellent, dirtrepellent and water-repellent properties. Resin, acid and silicone-free. NSF H1 registered (No.: 135928), corresponds to the requirements of USDA 1998 H1.

Designation

Multi-Purpose Grease III 400 Multi-Purpose Grease IV 400

Good adhesive properties. Stable against working and oxidationresistant. Supports the quality of the seal. Dust and water-repellent. Resin, acid and silicone-free.

Safety product. Your advantages: l Especially user-friendly and safe handling. l Improved workplace safety and health protection. l Free from mandatory warning symbols. 1

Lubricants system n Oil

3 n Fat

n Paste

n Dry lubricant

n Corrosion protection

NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector.

SILICON FLUID

Can be used in areas in which food is processed or stored. NSF H11

High-quality, physiologically safe anti-friction and release agent.

Extremely good temperature resistance from -50°C to + 250°C. Your advantage: l Wide field of application, also in the field of high temperatures and as a mould release agent.

Colourless, non-discolouring. Your advantages: l Can be used on bright backgrounds l No discolouration in the case of occasional contact with the product.

Safety product. Your advantages: l Especially user-friendly and safe handling. l Improved workplace safety and health protection. l Reduced marking with danger symbols.

come into contact with foodstuffs for technical reasons.

Good material compatibility.

Content in ml Art. No. 400 0893 221 000

l In this context, the product may

Moisture repellent, protects e. g. rubber parts against frost.

P. Qty. 1/12

Technical data Chemical basis

Colour Density at 20°C (active substance) Temperature range Basic oil viscosity at 25°C

–50°C to +250°C 350 mm2/s

Pre-clean the surface that is to be treated. Spray on evenly from a distance of approx. 20 cm.

0.97g/cm3

NSF H1 registered (No.: 135927), corresponds to the requirements of USDA 1998 H1.

Application:

Physiologically safe synthetic oil Colourless

This information is only a recommendation based on our experience. Preliminary testing required.

Lubricants system 3 Oil n

n Fat

n Paste

n Dry lubricant

n Corrosion protection

NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector.

Excellent adhesive range with minimum of pre-treatment. Your advantage: Very good adhesion on nearly all substrates, such as metals (steel, stainless steel, galvanized steel, aluminum), synthetic materials (ABS, glass fiber reinforced plastics, rigid PVC) or ceramic materials.

BOND+SEAL POWER

▼ ▼ ▼ ▼

UV resistant. Your advantage: Very well suitable for visible joints.

▼

High resistance to aging and weather. Your advantage: ● Ideal for outdoor applications. ● Permanently bonded joints.

▼

Non-corrosive. Your advantage: Prevents metal corrosion.

▼

Safety product. Your advantage: ● Particularly user-friendly and safe handling. ● Improves safety at the workplace and health protection. Odourless VOC and solvent free. Isocyanate, PVC and silicone free.

construction, in railway car and container construction, metal and apparatus construction and in heating, ventilation and air conditioning.

Cartridge Colour white grey black

Can be painted over. Your advantage: Ready for painting over prior to or after skin forming (confirm compatibility with paint by preliminary testing!).

▼

For structural joints subject to dynamic loads, as well as sealing gaps in automotive body and recreational vehicle

High initial strength. Your advantage: No elaborate fixing in place of components.

▼

Areas of application:

Elastic with low ductility. Your advantage: ● Capable to carry high dynamic loads. ● Ability to use lighter components with the same or higher strength.

▼

High-capacity, elastic hybrid structural adhesive.

Contents 300 ml 300 ml 300 ml

Art. No. 0893 235 1 0893 235 2 0893 235 3

P. Qty. 1/12 1/12 1/12

Instructions for use:

Note:

Substrates must be clean, dry and free of dust and grease (see Bond+Seal surface optimization). Not yet fully cured material can be removed with B+S Remover, Art. No. 0890 100 63, while fully cured material can only be removed mechanically.

Do not allow to come into contact with alkyd resin enamel systems. Not suitable for PE, PP, PTFE, silicone rubber, styrofoam and plasticized synthetics.

Specifications: Chemical base Density (DIN 53479) (prior to curing) Processing temperature Skin forming time* Full hardening time* Volume change (DIN 52451) Shore A hardness (DIN 53505) Tensile strength (DIN 53504) Elongation at rupture (DIN 53504) Tear growth resistance (DIN 53515) Combined tension and shear resistance (EN 1465) Specific volume resistance DIN 53482) Glass temperature (DIN 53445) Temperature stability Briefly Resistant against Briefly resistant against Shelf life * measured at 23°C / 50% rel. humidity

1-component polyurethane hybrid approx. 1.45 kg/l +5°C to +35°C approx. 40 min. 3 mm / 24 h (hygric hardening) <2% approx. 50 approx. 3 N/mm2 >300% approx. 15 N/mm approx. 2 N/mm2 approx. 1010 Ω cm approx. –60°C –40°C bis +90°C 16 h at +120°C / 4 h at +140°C water and salt water, watery tenside solutions fuels, mineral oils, vegetable and animal fats and oils 9 months (+10°C to +25°C)

The above information is to be understood as a recommendation only, based on our own experience. Preliminary testing by the user is required in individual applications.

MULTI-PURPOSE GREASE III/IV

Can be used in areas in which food is processed or stored. NSF H11 ● In this context, the product may

come into contact with foodstuffs for technical reasons.

MULTI-PURPOSE GREASE III

▼ ▼ ▼

▼ ▼

Physiologically safe, colourless grease with multifunctional additive combination.

Applications

Soap base Colour NLGI class (DIN 51818) Temperature range Basic oil viscosity at 40°C Drop point (DIN ISO 2176) Worked penetration (DIN ISO 2137) Corrosion protection (SKF Emcor-Test, DIN 51802) VKA welding load (DIN 51350) Designation to DIN 51502

Multi-Purpose Grease IV Art. No. 0893 107 003 For the lubrication of machines, plain bearings and anti-friction bearings, even under extreme conditions such as high temperatures, high pressures, shock and impact stresses and the influence of water.

100 mm2/s none 285

AL complex white 2 –45°C to +180°C (for short periods up to +200°C) 350 mm2/s > 250 285

0 1800 N KP2N-20

0 3000 N KPFHC2R-40

Synthetic high-performance grease with white solid lubricants. ▼

Multi-Purpose Grease III Art. No. 0893 107 002 For the lubrication and care of machines, plain bearings and anti-friction bearings, for longterm lubrication in wet rooms and areas as well as in critical areas in the food, pharmaceutical, printing and paper industries. anorganic transparent 2 –20° to +150°C

MULTI-PURPOSE GREASE IV

▼ ▼

Technical data

NSF H1 registered (No.: 135924), corresponds to the requirements of USDA 1998 H1.

▼

Multi-Purpose Grease III 400 Multi-Purpose Grease IV 400

P. Qty. Art No. 0893 107 002 1/24 0893 107 003 1/24

▼

Cont. in g

▼

Designation

Good adhesive properties. Stable against working and oxidationresistant. Supports the quality of the seal. Dust and water-repellent. Resin, acid and silicone-free.

Safety product. Your advantages: ● Especially user-friendly and safe handling. ● Improved workplace safety and health protection. ● Free from mandatory warning symbols. 1

Lubricants system ■ Oil

✓ Fat ■

■ Paste

■ Dry lubricant

■ Corrosion protection

NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector.

0893 130 0893 130 5 0891 302 01

1000 ml 0891 503 130 1 400 ml 0891 800 3 1 – 0891 800 1

Areas of application: Loosening of extremely corroded and oxidized screwed and joined connections on machines, aggregates and devices, predominantly in the food and beverage industry.

Instructions for use: Spray onto parts to be treated and allow to react briefly. Repeat the application in stubborn cases and prolong reaction time, if necessary.

■ Paste

Optimal corrosion protection through corrosion protection additives. Resin and acid free. Silicon free.

Specifications Chemical base

Medical grade white oil with synthetic oils Colour light-yellow transparent Density at 20°C (act. ingredient) 7.74 g/ml Temperature range for use –10°C to +140°C Flame point of act. ingredient 200°C Base oil viscosity at 40°C 35 mm2/s

Lubricant system ■ Grease

Outstanding material compatibility. Your advantage: ● Contrary to many conventional rust penetrating oils, does not attack rubber and plastics.

NSF = Internationally recognized organization for control and registration of products used in food processing.

This information is intended as a recommendation only, based on our experience. Pre-testing required!

✓ Oil ■

▼

300 ml 5l –

▼

Aerosol can Canister Drain cock for 5-litre canister Pump spray can REFILLO spray can Filling station

P. Qty. 1/12 1 1

▼

Art. No.

▼

Cont.

NSF H2 registered. Your advantage: ● Approved for use in food processing. ● However, direct contact of the product with food must be positively ruled out.

▼

Designation

Extreme capillary activity. Your advantages: ● Outstanding creep properties guarantee very quick penetration of rust and corrosion. ● The optimal effect starts shortly after spraying.

▼

Synthetic, biodegradable high-performance rust remover with food processing registration (NSF - H2).

▼

ROST OFF CRAFTY

Contains synthetic oil. Your advantages: ● Optimal creep and lubricating effect. ● Biodegradable.

■ Dry lubricant

■ Corrosion protection

Food grade lubrication oil Art. No. 08931071

FOOD SAFE PRODUCTS

Würth Ltd Würth Centre Mdina Road Zebbug, ZBG 9016 Tel: (+356) 2149 4604 Fax: (+356) 2144 1081 e-mail: sales@wuerth.com.mt https://eshop.wuerth.com.mt

We reserve the right to make any changes we deem necessary to improve the quality of the product, even without prior consent or notification in the technical field leading to the improvement of the articles’ quality, as well as changes of design, model and color. While stocks last. Illustrations may be example illustrations that may differ in appearance from the goods supplied. Errors excepted. We shall not be liable for any printing errors or misprints. Our general terms and conditions apply.