MOUNTING & CONNECTOR EQUIPMENT Part 1
C-Mounting Rails & Brackets
Stainless Steel A4 C-Mounting Hot-dip galvanized System & Accessories C-Mounting Rails & Accessories
Mounting & Connector Components
Pipe Clamps
Cable Mounting System
Mounting & Connector Components Varifix® Profile Feet................................................................................................................... 1 – 13 Varifix® End Bracket...............................................................................................................14 – 15 Varifix® Rail Connector...........................................................................................................16 – 18 Varifix® Bracket Connector/Flat Connector..........................................................................19 – 22 Varifix® Rail Connector.......................................................................................................... 23 – 24 Varifix® Triangular Bracket/Frame Bracket...........................................................................25 – 26 Varifix® Flapped Bracket/Try Square....................................................................................27 – 31 Varifix® Angle Connector/Hinge Connector........................................................................32 – 37 Featured Fasteners................................................................................................................ 38 – 43 Varifix® Clamping Flange...............................................................................................................44 Varifix® Tensioning Clamp..............................................................................................................45 Varifix® Beam Clamp/Support Clip TS.................................................................................46 – 51 Varifix® Combination Sliding Nut................................................................................................... 52 Varifix® Retaining Clip/Image.............................................................................................. 53 – 55
VARIFIX® PROFILE FOOT - C2C
Elongated hole length (LL1)
25 mm
Material
Steel
Surface
For C-assembly rails Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Galvanised
Art. No.
0862 005 110
0862 005 111
0862 005 112
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 44 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t)
25
100 mm 50 mm 5 mm
10
135 mm 65 mm 6 mm
10
135 mm 65 mm 6 mm
Profile length (Lp)
80 mm
100 mm
120 mm
Profile height (Hp)
25 mm
36 mm
41 mm
Elongated hole length 2 (LL2)
25 mm
30 mm
30 mm
Profile internal width (Bp) Profile thickness (tp)
28.5 mm
3 mm
36.5 mm
4 mm
41.5 mm
4 mm
Elongated hole width (LB1)
9 mm
11 mm
13 mm
Hole distance (LA1)
68 mm
100 mm
100 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Weight
9 mm
27 mm 30 mm 320 g
STEP - 2017-01-09 - 17375 - ©
Application area For attaching C-assembly rails with heavy load on ground, ceiling, wall, in shafts and channels.
3
11 mm
37 mm 40 mm 680 g
13 mm
37 mm 55 mm 900 g
VARIFIX® CROSSWISE PROFILE FOOT - C2C
Elongated hole length (LL1)
25 mm
Material
Steel
Surface
Galvanised
Art. No.
0862 005 109
0862 005 114
0862 005 116
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 44 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
10
10
100 mm
135 mm
5 mm
6 mm
50 mm
80 mm
65 mm
100 mm
10
135 mm 65 mm 6 mm
120 mm
Profile internal width (Bp)
28.5 mm
36.5 mm
41.5 mm
Profile thickness (tp)
3 mm
4 mm
4 mm
Elongated hole width (LB1)
9 mm
11 mm
13 mm
Hole distance (LA1)
68 mm
100 mm
100 mm
Hole distance 3 (LA3)
30 mm
Profile height (Hp)
28 mm
Elongated hole length 2 (LL2) 25 mm Elongated hole width 2 (LB2) 9 mm Hole distance 2 (LA2) Weight
27 mm 320 g
STEP - 2018-03-20 - 21164 - ©
Application area For fastening C-assembly rails with heavy loads to: Floors, ceilings, walls, in ducts and channels.
4
36 mm
30 mm
11 mm
37 mm 40 mm 680 g
41 mm
30 mm
13 mm
37 mm 55 mm 805 g
For C-assembly rails Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/41 - C2C
For C-assembly rails With large base plate Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Art. No.
0862 005 212
Suitable for mounting rail
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
Profile internal width (Bp) Profile height (Hp)
1
150 mm 150 mm 8 mm
120 mm 37 mm
42 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Elongated hole width (LB1)
13 mm
Diameter of hole (RL)
Elongated hole length 2 (LL2) Elongated hole width 2 (LB2)
13 mm
30 mm
13 mm
Hole distance (LA1)
102 mm
Hole distance 3 (LA3)
55 mm
Hole distance 2 (LA2) Surface Weight
Material
120 mm Galvanised 1.33 kg Steel
STEP - 2017-01-09 - 17380 - ©
Application area For fastening C-assembly rails with heavy loads to: Floors, ceilings, walls, in ducts and channels.
5
VARIFIX® PROFILE FOOT 41/82 - C2C
Art. No.
0862 005 117
Suitable for mounting rail
41 x 82 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t)
1
180 mm 80 mm 6 mm
Profile length (Lp)
120 mm
Profile height (Hp)
83 mm
Elongated hole length (LL1)
20 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
138 mm
Profile internal width (Bp) Profile thickness (tp)
Elongated hole length 2 (LL2) Elongated hole width 2 (LB2) Hole distance 2 (LA2) Surface Weight
Material
STEP - 2018-03-07 - 17378 - ©
Application area For attaching C-assembly rails with heavy load on ground, ceiling, wall, in shafts and channels.
6
42 mm
4 mm
20 mm
13 mm
35 mm
Galvanised 1.49 kg Steel
For C-assembly rails Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/124 - C2C
Art. No.
0862 005 113
Suitable for mounting rail
41 x 124 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
215 mm 82 mm 6 mm
100 mm
Profile internal width (Bp)
42 mm
Profile thickness (tp)
4 mm
Profile height (Hp)
Elongated hole length (LL1)
Elongated hole length 2 (LL2)
125 mm 20 mm
20 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
180 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Surface Weight
Material
STEP - 2016-12-19 - 21165 - ©
Application area For attaching C-assembly rails with heavy load on ground, ceiling, wall, in shafts and channels.
7
13 mm
50 mm
Galvanised 1.64 kg Steel
For C-mounting rails Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/82 - C2C
For C-assembly rails With large base plate Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Art. No.
0862 005 217
Suitable for mounting rail
41 x 82 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
210 mm 210 mm 8 mm
120 mm
Profile internal width (Bp)
42 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Profile height (Hp)
Diameter of hole (RL)
Elongated hole length 2 (LL2)
83 mm
13 mm
20 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
150 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Surface Weight
Material
STEP - 2016-12-19 - 21166 - ©
Application area For attaching C-assembly rails with heavy load on ground, ceiling, wall, in shafts and channels.
8
13 mm
180 mm 35 mm
Galvanised 2.33 kg Steel
VARIFIX® PROFILE FOOT FOR C-RAIL 41/124 - C2C
Art. No.
0862 005 213
Suitable for mounting rail
41 x 124 mm
P. Qty.
Holder plate length (L) Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
210 mm 210 mm 8 mm
100 mm
Profile internal width (Bp)
42 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Profile height (Hp)
Diameter of hole (RL)
Elongated hole length 2 (LL2)
125 mm
13 mm
20 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
150 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Surface Weight
Material
STEP - 2017-01-09 - 17381 - ©
Application area For attaching C-assembly rails with heavy load on ground, ceiling, wall, in shafts and channels.
9
13 mm
180 mm 50 mm
Galvanised 2.47 kg Steel
With large base plate Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/86 - C2C
Art. No.
0862 005 280
Holder plate length (L)
180 mm
P. Qty.
Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
80 mm 6 mm
195 mm
Profile internal width (Bp)
43 mm
Profile thickness (tp)
4 mm
Elongated hole length 2 (LL2)
47 mm
Profile height (Hp)
Elongated hole length (LL1)
Elongated hole length 3 (LL3)
88 mm 20 mm
45 mm
Elongated hole width (LB1)
13 mm
Hole distance 2 (LA2)
34 mm
Hole distance (LA1)
Hole distance 3 (LA3) Hole distance 4 (LA4) Surface Weight
Material
STEP - 2018-03-07 - 21688 - ©
Application area For the attachment of double profiles on floors, ceilings, walls, in ducts and channels.
10
138 mm 63.5 mm 58.5 mm
Galvanised 1905 g
Structural steel, 1.0037 previously S235 JR
For double profiles Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/86 - C2C
For double profiles With large base plate Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Art. No.
0862 005 282
Holder plate length (L)
210 mm
P. Qty.
Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
210 mm 8 mm
195 mm
Profile internal width (Bp)
43 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Profile height (Hp)
Diameter of hole (RL)
Elongated hole length 2 (LL2) Elongated hole length 3 (LL3)
88 mm
13 mm
47 mm 45 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
150 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Hole distance 4 (LA4) Surface Weight
Material
STEP - 2018-03-07 - 21689 - ©
Application area For the attachment of double profiles on floors, ceilings, walls, in ducts and channels.
11
13 mm
180 mm
63.5 mm 58.5 mm
Galvanised 2820 g
Structural steel, 1.0037 previously S235 JR
VARIFIX® U-PROFILE FOOT 41/86 - C2C
For double profiles With large base plate Double profile can be installed from above
Art. No.
0862 005 284
Holder plate length (L)
210 mm
P. Qty.
Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
210 mm 8 mm
195 mm
Profile internal width (Bp)
43 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Profile height (Hp)
Diameter of hole (RL)
Elongated hole length 2 (LL2) Elongated hole length 3 (LL3)
86.5 mm
13 mm
47 mm 45 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
150 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Hole distance 4 (LA4) Surface Weight
Material
STEP - 2018-03-07 - 21690 - ©
Application area For the attachment of double profiles on floors, ceilings, walls, in ducts and channels.
12
13 mm
180 mm
63.5 mm 58.5 mm
Galvanised 2840 g
Structural steel, 1.0037 previously S235 JR
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/128 - C2C
Art. No.
0862 005 290
Holder plate length (L)
215 mm
P. Qty.
Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
82 mm 6 mm
195 mm
Profile internal width (Bp)
43 mm
Profile thickness (tp)
4 mm
Elongated hole length 2 (LL2)
47 mm
Profile height (Hp)
Elongated hole length (LL1)
Elongated hole length 3 (LL3)
130 mm 20 mm
45 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
180 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Hole distance 4 (LA4) Surface Weight
Material
STEP - 2018-03-07 - 21691 - ©
Application area For the attachment of double profiles on floors, ceilings, walls, in ducts and channels.
13
13 mm
51 mm
63.5 mm 58.5 mm
Galvanised 2310 g
Structural steel, 1.0037 previously S235 JR
For double profiles Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® PROFILE FOOT 41/128 - C2C
For double profiles With large base plate Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Art. No.
0862 005 292
Holder plate length (L)
210 mm
P. Qty.
Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
210 mm 8 mm
195 mm
Profile internal width (Bp)
43 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Profile height (Hp)
Diameter of hole (RL)
Elongated hole length 2 (LL2) Elongated hole length 3 (LL3)
130 mm
13 mm
47 mm 45 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
150 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Hole distance 4 (LA4) Surface Weight
Material
STEP - 2018-03-07 - 21692 - ©
Application area For the attachment of double profiles on floors, ceilings, walls, in ducts and channels.
14
13 mm
180 mm
63.5 mm 58.5 mm
Galvanised 3075 g
Structural steel, 1.0037 previously S235 JR
VARIFIX® U-PROFILE FOOT 41/128 - C2C
For double profiles With large base plate Double profile can be installed from above
Art. No.
0862 005 294
Holder plate length (L)
210 mm
P. Qty.
Holder plate width (B)
Holder plate thickness (t) Profile length (Lp)
1
210 mm 8 mm
195 mm
Profile internal width (Bp)
43 mm
Profile thickness (tp)
4 mm
Elongated hole length (LL1)
25 mm
Profile height (Hp)
Diameter of hole (RL)
Elongated hole length 2 (LL2) Elongated hole length 3 (LL3)
128 mm
13 mm
47 mm 45 mm
Elongated hole width (LB1)
13 mm
Hole distance (LA1)
150 mm
Elongated hole width 2 (LB2) Hole distance 2 (LA2) Hole distance 3 (LA3) Hole distance 4 (LA4) Surface Weight
Material
STEP - 2018-03-07 - 21693 - ©
Application area For the attachment of double profiles on floors, ceilings, walls, in ducts and channels.
15
13 mm
180 mm
63.5 mm 58.5 mm
Galvanised 3350 g
Structural steel, 1.0037 previously S235 JR
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® END BRACKET - C2C
Holder plate length (L)
120 mm
Hole distance on wall attachment (LA1)
75 mm
Holder plate width (B)
Elongated hole length (LL) Material Surface
Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
40 mm
20 mm Steel
Galvanised
Art. No.
0862 005 140
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm 36 x 36 mm
P. Qty.
Holder plate thickness (t)
10
4 mm
0862 005 141 0862 005 142 10
8 mm
10
41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 44 mm 8 mm
Hole distance 2 (LA2)
42 mm
50 mm
55 mm
Horizontal-section thickness (tQ)
4 mm
5 mm
5 mm
Horizontal-section length (LQ)
77 mm
90 mm
100 mm
Elongated hole width (LB)
Horizontal-section width (BQ) Nominal diameter (G) Weight
STEP - 2018-03-07 - 17382 - ©
Application area For attaching C-assembly rails with light load on ground, ceiling, wall, in shafts and channels.
16
9 mm
22 mm 8 mm
210 g
9 mm
30 mm
10 mm 370 g
13 mm
34 mm
10 mm 420 g
VARIFIX® CROSSWISE END BRACKET - C2C
Holder plate length (L)
120 mm
Holder plate width (B)
Hole distance on wall attachment (LA1)
40 mm
75 mm
Elongated hole length (LL)
20 mm
Surface
Galvanised
Material
Art. No.
P. Qty.
Steel
0862 005 143
0862 005 144 0862 005 145
10
10
Holder plate thickness (t)
4 mm
8 mm
8 mm
Elongated hole width (LB)
9 mm
13 mm
13 mm
Horizontal-section width (BQ)
22 mm
30 mm
35 mm
Nominal diameter (G)
8 mm
10 mm
10 mm
Suitable for mounting rail Hole distance 2 (LA2)
26 x 18 mm, 26 x 26 mm, 36 x 36 mm 28 x 28 mm
42 mm
Horizontal-section thickness (tQ) 4 mm Horizontal-section length (LQ) Weight
77 mm
212 g
STEP - 2018-03-07 - 21167 - ©
Application area For attaching C-assembly rails with light load on ground, ceiling, wall, in shafts and channels.
17
50 mm 5 mm
90 mm
440 g
10
41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 44 mm 55 mm 5 mm
100 mm
475 g
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® RAIL CONNECTOR, PRE-MOUNTED — C2C
Material
Steel
Surface
Art. No.
P. Qty.
Secure plug-in assembly
Galvanised 0862 006 001
10
0862 006 002
10
0862 006 003
10
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
Width (B1)
25 mm
35 mm
40 mm
Thickness (t1)
5 mm
6 mm
6 mm
Hole distance (LA1)
42 mm
50 mm
Suitable for mounting rail Length (L1) Width 2 (B2)
Thickness 2 (t2)
Nominal diameter (G)
Weight
156 mm
22 mm
4 mm
8 mm
261 g
STEP - 2018-03-20 - 17383 - ©
Application area Rail and bracket connections, bracket structures, free structures
18
180 mm
30 mm
5 mm
10 mm
530 g
41 x 22 mm, 41 x 41 mm, 41 x 44 mm 200 mm
33.5 mm
5 mm
56 mm
10 mm
655 g
• Saves time on labour • No individual components Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® RAIL CONNECTOR - C2C
Heavy-duty design With 4 round holes Adapted to slotted holes on mounting rails Force- and positive-fit connection For through-hole mounting with set screws or hexagonal bolts, washers and nuts Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Profile height (HP) Profile width (BP)
35 mm
42 mm
Thickness (t1)
4 mm
Material
Steel
Diameter of hole (RL) Surface
11 mm Galvanised
Art. No.
0862 006 005
Suitable for mounting rail
41 x 41 mm, 41 x 82 mm
P. Qty.
Length (L1)
Hole distance (LA1)
Weight
1
155 mm
35 mm 532 g
0862 006 004 1
41 x 62 mm, 41 x 124 mm
200 mm
50 mm 690 g
STEP - 2016-12-19 - 21168 - ©
Instructions • Mounting 41/41: Connect rail connector with form-fitting connection using four 10 x 60 mm hex screws, nuts and wing washers. • Mounting 41/62: Connect rail connector with form-fitting connection using four 10 x 80 mm hex screws, nuts and wing washers. • Mounting 41/82: Connect rail connector with form-fitting connection using 10 x 110 mm hex screws, nuts and wing washers. • Mounting 41/124: Connect rail connector with form-fitting connection using 10 x 150 mm hex screws, nuts and wing washers.
19
VARIFIX® RAIL CONNECTOR - C2C
Suitable for mounting rail
41 x 86 mm
Profile height (HP)
21 mm
Width (B1)
Profile width (BP)
35 mm
3 mm
Hole distance (LA1)
100 mm
Surface
Sendzimir galvanised
Diameter of hole (RL) Material
Art. No.
P. Qty.
Length (L1)
Weight
Instructions Standardfix connection
18 mm
Structural steel sendzimir galvanised, S320GD, EN 10326
0862 006 150
0862 006 152
0.5 m
1m
1
1170 g
Width (B1)
Profile height (HP) Profile width (BP)
2340 g
21 mm
100 mm
Surface
Sendzimir galvanised
Material
Art. No.
P. Qty.
Length (L1)
Weight
20
18 mm
Structural steel sendzimir galvanised, S320GD, EN 10326
0862 006 160
0862 006 162
0.5 m
1m
1
1630 g
With round holes Adapted to the through holes of the double profile
Instructions Standardfix connection
77 mm
Hole distance (LA1)
Diameter of hole (RL)
STEP - 2018-03-07 - 21687 - ©
110 mm
3 mm
For double profile 41/128
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
41 x 128 mm
Thickness (t1)
Two rail connectors should be used per connection
1
VARIFIX® RAIL CONNECTOR - C2C
Suitable for mounting rail
With round holes Adapted to the through holes of the double profile Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
70 mm
Thickness (t1)
For double profile 41/86
1
3260 g
Two rail connectors should be used per connection
VARIFIX® BRACKET CONNECTOR - C2C
Surface
Galvanised
Material Art. No.
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Steel 0862 006 080
0862 006 081 0862 006 082 0862 006 083 0862 006 084 0862 006 085 0862 006 086
Suitable for mounting rail
26 x 18 mm
Length (L)
107 mm
26 x 26 mm, 28 x 28 mm
Height (H)
20 mm
P. Qty.
Width (B)
Thickness (t)
20
25 mm
20
20
20
20
10
10
36 x 36 mm
41 x 22 mm
41 x 41 mm
40 x 45 mm
41 x 62 mm
109 mm
142 mm
147 mm
147 mm
146 mm
147 mm
30 mm
39 mm
26 mm
45 mm
49 mm
66 mm
25 mm
3 mm
3 mm
35 mm 4 mm
40 mm 5 mm
40 mm 5 mm
40 mm 5 mm
40 mm 5 mm
Profile internal width (BP)
27 mm
29 mm
37 mm
42 mm
42 mm
41 mm
42 mm
Hole distance (LA)
74 mm
74 mm
107 mm
107 mm
107 mm
100 mm
107 mm
Diameter of hole (RL)
Product weight (per item)
11 mm
11 mm
70 g
78 g
13 mm 196 g
13 mm 260 g
13 mm 268 g
13 mm 302 g
13 mm 372 g
Application area • For cross-joints of C-mounting rails • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® FLAT CONNECTOR, STRAIGHT - C2C
Length (L1)
130 mm
Hole distance (LA1)
44 mm
Surface
Galvanised
Material
STEP - 2018-03-20 - 17384 - ©
Art. No.
Steel
0862 006 052 0862 006 053
P. Qty.
10
Suitable for mounting rail
36 x 36 mm
Diameter of hole (RL)
11 mm
Width (B)
35 mm
Thickness (t)
Product weight (per item)
21
4 mm
130 g
10
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm 13 mm 6 mm
40 mm 217 g
With 3 round holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • For the attached mounting of rail and bracket connections • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® FLAT CONNECTOR, STRAIGHT - C2C
Length (L1)
44 mm
Surface
Galvanised
Material
Art. No.
Suitable for mounting rail
Diameter of hole (RL)
Thickness (t)
Width (B)
Product weight (per item)
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
174 mm
Hole distance (LA1)
P. Qty.
With 4 round holes
Steel
0862 006 062
10
36 x 36 mm
11 mm
4 mm
35 mm
170 g
0862 006 063
10
41 x 124 mm, 41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm
13 mm
6 mm
40 mm
310 g
Application area • For the attached mounting of rail and bracket connections • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® FLAT CONNECTOR, L-SHAPED - C2C
Art. No.
0862 006 012
Suitable for mounting rail
36 x 36 mm
P. Qty.
Diameter of hole (RL) Length (L1)
STEP - 2018-03-07 - 17385 - ©
Length 2 (L2) Thickness (t)
25
11 mm
82.5 mm 80 mm 4 mm
Hole distance (LA1)
44 mm
Product weight (per item)
130 g
Width (B) Material Surface
22
35 mm Steel
Galvanised
With 3 round holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • For the attached mounting of corner connections • Can also be directly mounted in the hole pattern on the C-mounting rails
VARIFIX® FLAT CONNECTOR, T-SHAPED - C2C
Art. No.
0862 006 042
Suitable for mounting rail
36 x 36 mm
P. Qty.
25
Diameter of hole (RL)
80 mm
Thickness (t)
4 mm
Hole distance (LA1)
44 mm
Width (B)
35 mm
Hole distance 2 (LA2)
44 mm
Product weight (per item)
170 g
Material
Steel
Surface
Galvanised
VARIFIX® FLAT CONNECTOR, L-SHAPED - C2C
Thickness (t)
40 mm
Surface
Galvanised
Material
Suitable for mounting rail
STEP - 2018-03-07 - 17386 - ©
Length (L1)
Length 2 (L2)
Width (B)
Product weight (per item)
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Steel
0862 006 032
25
36 x 36 mm
11 mm
115 mm
75 mm
35 mm
153 g
0862 006 033
20
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
13 mm
118 mm
78 mm
38 mm
171 g
Application area • For the attached mounting of corner connections • Can also be directly mounted in the hole pattern on the C-mounting rails
23
With 4 round holes
4 mm
Hole distance (LA1)
Diameter of hole (RL)
Application area • For the attached mounting of T-joints • Can also be directly mounted in the hole pattern on the C-mounting rails
130 mm
Length 2 (L2)
Art. No.
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
11 mm
Length (L1)
P. Qty.
With 4 round holes
VARIFIX® FLAT CONNECTOR, T-SHAPED - C2C
Art. No.
0862 006 023
Suitable for mounting rail
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
P. Qty.
Diameter of hole (RL) Length (L1)
Length 2 (L2) Thickness (t)
20
13 mm
136 mm
120 mm 4 mm
Hole distance (LA1)
40 mm
Width (B)
40 mm
Hole distance 2 (LA2) Product weight (per item) Material
STEP - 2018-03-07 - 17387 - ©
Surface
24
56 mm 370 g Steel
Galvanised
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • For the attached mounting of corner connections • Can also be directly mounted in the hole pattern on the C-mounting rails
VARIFIX® RAIL CONNECTOR T-SHAPED - C2C
Art. No.
0862 006 105
Suitable for mounting rail
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm
P. Qty.
Length (L1)
Length 2 (L2) Width (B1)
Width 2 (B2)
Profile height (HP) Profile width (BP)
4
94 mm
137 mm 55 mm
40.5 mm 41 mm
6 mm
Hole distance (LA1)
40 mm
Nominal diameter (G)
13 mm
Hole distance 2 (LA2) Weight
Material Surface
P. Qty.
Suitable for mounting rail Length (L1)
Length 2 (L2)
Profile height (HP) Profile width (BP)
Thickness (t1)
STEP - 2018-03-07 - 20388 - ©
Elongated hole length (LL) Elongated hole width (LB)
105 mm 0.71 kg Steel
Galvanised
0862 006 115 4
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm
155 mm
155 mm 35 mm
42 mm
4 mm
40 mm 15 mm
Hole distance (LA1)
75 mm
Weight
1.07 kg
Hole distance 2 (LA2) Material Surface
25
Application area • For T-joints and cross-joints of C-mounting rails • Frame structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
13 mm
VARIFIX® RAIL CONNECTOR T-SHAPED - C2C
Art. No.
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
43 mm
Thickness (t1)
Diameter of hole (RL)
With round hole
100 mm Steel
Galvanised
With oblong holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • For T-joints and cross-joints of C-mounting rails • Frame structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® RAIL CONNECTOR 3D - C2C
Art. No.
0862 006 125
Suitable for mounting rail
41 x 41 mm, 41 x 22 mm, 41 x 44 mm, 41 x 62 mm
P. Qty.
Length (L1)
Length 2 (L2) Width (B1)
4
125 mm
Elongated hole length (LL)
40 mm
6 mm
15 mm
Hole distance (LA1)
57 mm
Material
Steel
Weight
Surface
0.85 kg Galvanised
VARIFIX® RAIL CONNECTOR 4D - C2C
Art. No. P. Qty.
Suitable for mounting rail
4
41 x 41 mm, 41 x 22 mm, 41 x 44 mm, 41 x 62 mm
120 mm
Length 3 (L3)
70 mm
Profile width (BP) Thickness (t1)
Elongated hole length (LL) STEP - 2017-01-09 - 17388 - ©
0862 006 135
Length (L1)
Length 2 (L2)
Elongated hole width (LB)
182 mm 42 mm
4 mm
40 mm 15 mm
Hole distance (LA1)
57 mm
Weight
1.01 kg
Hole distance 2 (LA2) Material Surface
26
Application area • For cross-joints of C-mounting rails • Frame structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
49 mm
47 mm
Elongated hole width (LB)
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
62 mm
Width 2 (B2)
Thickness (t1)
With slot
112 mm Steel
Galvanised
With slot Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • For cross-joints of C-mounting rails • Frame structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® TRIANGULAR BRACKET — C2C
For fixed-point mounting of C-assembly rails (longitudinal, transverse, diagonal) Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Surface
Galvanised
Elongated hole length (LL1)
30 mm
Art. No.
0862 005 070
0862 005 071
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
Limb length (L)
86 mm
36 x 36 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm
Thickness (t)
5 mm
Material
Elongated hole length 2 (LL2)
P. Qty.
Limb length 2 (L)
Steel
25 mm
25
86 mm
25
106 mm 106 mm 6 mm
Elongated hole length 3 (LL3)
30 mm
50 mm
Elongated hole width 2 (LB2)
9 mm
11 mm
Elongated hole width (LB1)
Elongated hole width 3 (LB3) Hole distance (LA)
STEP - 2018-03-07 - 17389 - ©
Product weight (per item)
27
9 mm
9 mm
35 mm
118.480 g
11 mm
11 mm 46 mm 225 g
VARIFIX® FRAME BRACKET - C2C
For fixed-point mounting of C-assembly rails (longitudinal, transverse, diagonal) Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Material
Steel
Art. No.
0862 005 050
0862 005 051
0862 005 052
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
Limb length (L)
100 mm
150 mm
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
Thickness (t)
3 mm
4 mm
Surface
P. Qty.
Width of side (B) Diameter of hole (RL)
Elongated hole length (LL) Elongated hole width (LB) Hole distance (LA)
STEP - 2017-12-08 - 22317 - ©
Product weight (per item)
28
Galvanised
25
27 mm 9 mm
20 mm 9 mm
40 mm 207 g
10
35 mm
11 mm
25 mm
11 mm
60 mm 530 g
10
150 mm 40 mm 4 mm
13 mm
25 mm
13 mm
50 mm
592.1 g
LEFT-HAND FLAPPED BRACKET
Art.-Nr.
0862 990 012
Passend für Montageschiene
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
Länge (L)
120 mm
Breite 2 (B2)
80 mm
VE
Breite 1 (B1) Höhe (H)
Stärke (t)
Lochabstand (LA)
Lochdurchmesser (RL) Oberfläche Werkstoff
Produktgewicht (per Stück)
10
120 mm 46 mm 5 mm
35 mm 14 mm
Verzinkt Stahl
400 g
FLAPPED BRACKET, RIGHT
Art.-Nr.
0862 990 011
Passend für Montageschiene
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
VE
Länge (L)
Breite 1 (B1)
STEP - 2018-03-07 - 18965_CP - ©
Breite 2 (B2) Höhe (H)
Stärke (t)
Lochabstand (LA)
Lochdurchmesser (RL) Oberfläche Werkstoff
Produktgewicht (per Stück)
29
For fixed-point mounting of C-assembly rails (longitudinal, transverse, diagonal)
10
120 mm
120 mm 80 mm 46 mm 5 mm
35 mm 14 mm
Verzinkt Stahl
400 g
For fixed-point mounting of C-assembly rails (longitudinal, transverse, diagonal)
VARIFIX® CONNECTION BRACKET, 90° - C2C
Limb length (L1)
47 mm
Limb length 2 (L2)
47 mm
Material
Steel
Surface
Galvanised
Art. No.
0862 005 231
0862 005 232
Suitable for mounting rail
36 x 36 mm
Width of side (B)
35 mm
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 86 mm, 41 x 128 mm
Round hole diameter (RL)
11 mm
P. Qty.
Thickness (t) Weight
25
4 mm
0.09 kg
6 mm
13 mm
0.15 kg
91 mm
91 mm
Material
Steel 0862 005 251
0862 005 252
Suitable for mounting rail
36 x 36 mm
Width of side (B)
35 mm
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
Round hole diameter (RL)
11 mm
Thickness (t) STEP - 2018-03-07 - 17390 - ©
Galvanised
Art. No. P. Qty.
Hole distance (LA) Weight
30
25
4 mm
44 mm
0.18 kg
Application area • Corner connections • Bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
40 mm
Limb length 2 (L2)
Surface
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
25
VARIFIX® CONNECTION BRACKET, 90° - C2C
Limb length (L1)
With 2 round holes
25
40 mm 6 mm
13 mm 35 mm 0.3 kg
With 4 round holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® CONNECTION BRACKET, 90° - C2C
Elongated hole length (LL1)
25 mm
Surface
Galvanised
Hole distance (LA)
33 mm
Material
Steel
Art. No.
0862 005 040
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 36 x 36 mm 28 x 28 mm
Limb length (L1)
28 mm
36 mm
Width of side (B)
25 mm
33 mm
P. Qty.
Limb length 2 (L2) Thickness (t)
0862 005 041 0862 005 042
50
50
75 mm
80 mm
4 mm
5 mm
Elongated hole length 2 (LL2) 15 mm
20 mm
45 mm
90 mm 40 mm 6 mm
20 mm
11 mm
13 mm
Weight
0.06 kg
0.11 kg
0.19 kg
13 mm
VARIFIX® CONNECTION BRACKET, 90° - C2C
Limb length (L1)
46.5 mm
Hole distance (LA)
35 mm
Limb length 2 (L2)
91 mm
Surface
Galvanised
STEP - 2018-03-07 - 17391 - ©
Material
Steel
Art. No.
0862 005 241
0862 005 242
Suitable for mounting rail
36 x 36 mm
Width of side (B)
35 mm
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
Round hole diameter (RL)
11 mm
P. Qty.
Thickness (t) Weight
31
25
4 mm
0.13 kg
25
40 mm 6 mm
13 mm
0.22 kg
Application area • Corner connections • Bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rail
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
9 mm
11 mm
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
50
Elongated hole width (LB1)
Elongated hole width 2 (LB2) 9 mm
With 3 slotted holes
With 3 round holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® CONNECTION BRACKET, 45° - C2C
Elongated hole length (LL1)
25 mm
Material
Steel
Surface
Galvanised
Art. No.
0862 005 060
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 36 x 36 mm 28 x 28 mm
Limb length (L1)
68 mm
72 mm
Thickness (t)
4 mm
5 mm
P. Qty.
Width of side (B)
0862 005 061 0862 005 062
15
15
25 mm
35 mm
84 mm
40 mm 6 mm
13 mm
Weight
175 g
262 g
34 mm
70 g
30 mm
VARIFIX® CONNECTION BRACKET, 45° - C2C
Limb length (L1)
88 mm
Material
Steel
Surface
Art. No.
STEP - 2018-03-20 - 17392 - ©
P. Qty.
Galvanised
0862 005 261
25
Suitable for mounting rail 36 x 36 mm Width of side (B)
35 mm
Thickness (t)
4 mm
Hole distance (LA)
44 mm
Round hole diameter (RL) 11 mm
Weight
32
170 g
0862 005 262
25
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm
40 mm
6 mm
13 mm
35 mm
300 g
Application area • Corner connections • Bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 82 mm, 41 x 44 mm, 41 x 128 mm, 41 x 86 mm
11 mm
33 mm
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
15
Elongated hole width (LB1) 9 mm
Hole distance (LA)
With 4 slotted holes
With 4 round holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® CONNECTION BRACKET, 90°, PRE-ASSEMBLED - C2C
Secure plug-in assembly • Saves time on labour • No individual components Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Surface
Galvanised
Art. No.
0862 005 120
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
Limb length (L1)
82 mm
95 mm
105 mm
Thickness (t)
5 mm
6 mm
6 mm
Material
P. Qty.
Width of side (B) Hole distance (LA)
Thread type x nominal diameter x length of clamping bolt (G) Weight
Steel
15
25 mm 42 mm
0862 005 121 0862 005 122 15
35 mm 50 mm
15
41 x 124 mm, 41 x 82 mm, 41 x 62 mm, 41 x 44 mm, 41 x 41 mm, 41 x 22 mm, 41 x 86 mm, 41 x 128 mm
40 mm
55 mm
M 8 x 16 mm
M 10 x 20 mm
M 10 x 20 mm
270 g
550 g
700 g
VARIFIX® CONNECTION BRACKET, 45°, PRE-ASSEMBLED - C2C
Galvanised
Art. No.
0862 005 130
0862 005 131 0862 005 132
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
Limb length (L1)
79 mm
91.5 mm
97 mm
Thickness (t)
5 mm
6 mm
6 mm
STEP - 2018-03-07 - 17393 - ©
P. Qty.
Width of side (B) Hole distance (LA)
Thread type x nominal diameter x length of clamping bolt (G) Weight
33
Steel
15
25 mm 42 mm
Secure plug-in assembly • Saves time on labour • No individual components Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Surface
Material
Application area • Corner connections • Bracket structures and free structures
15
35 mm
50 mm
15
41 x 124 mm, 41 x 82 mm, 41 x 62 mm, 41 x 44 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm
40 mm 55 mm
M 8 x 16 mm
M 10 x 20 mm
M 10 x 20 mm
270 g
550 g
640 g
Application area • Corner connections • Bracket structures and free structures
VARIFIX® ANGLE CONNECTOR, 90°
Art. No.
0862 005 316
Suitable for mounting rail
41 x 62 mm, 41 x 44 mm, 41 x 41 mm, 41 x 22 mm
P. Qty.
Length (L)
Thickness (t)
Limb length (LS)
Elongated hole length (LL) Elongated hole width (LB) Weight
Surface
Material
With 4 slotted holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
5
55 mm 6 mm
47 mm 40 mm 15 mm
0.384 kg
Galvanised Steel
Application area • Corner connections • Frame structures, bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® ANGLE CONNECTOR, 90° - C2C
Art. No.
0862 005 317
Suitable for mounting rail
41 x 62 mm, 41 x 44 mm, 41 x 41 mm, 41 x 22 mm
P. Qty.
Length (L)
Thickness (t)
Limb length (LS)
Elongated hole length (LL) Elongated hole width (LB) Hole distance (LA)
STEP - 2018-03-07 - 17394 - ©
Weight
Surface
Material
5
117 mm 6 mm
47 mm 40 mm 15 mm
62.5 mm 0.78 kg
Galvanised Steel
Application area • Corner connections • Frame structures, bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
34
With 8 slotted holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® ANGLE CONNECTOR, 45° - C2C
Art. No.
0862 005 326
Suitable for mounting rail
41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 44 mm
P. Qty.
Length (L)
Thickness (t)
55 mm 6 mm
47 mm
Elongated hole width (LB)
15 mm
Weight
Surface
Material
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
5
Limb length (LS)
Elongated hole length (LL)
With 4 slotted holes
40 mm 0.39 kg
Galvanised Steel
Application area • Corner connections • Frame structures, bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
VARIFIX® ANGLE CONNECTOR, 45° - C2C
Art. No.
0862 005 327
Suitable for mounting rail
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm
P. Qty.
Length (L)
Thickness (t)
120 mm 6 mm
Limb length (LS)
47 mm
Elongated hole width (LB)
15 mm
Elongated hole length (LL) Hole distance (LA) Weight
Surface STEP - 2017-01-09 - 17396 - ©
5
Material
40 mm 60.5 mm 0.75 kg
Galvanised Steel
Application area • Corner connections • Frame structures, bracket structures and free structures • Can also be mounted directly in the hole pattern on the C-assembly rails
35
With 8 slotted holes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® FLAT HINGE CONNECTOR WITH ROUND HOLE - C2C
Art. No.
0862 005 190
Suitable for mounting rail
41 x 124 mm, 41 x 22 mm, 41 x 44 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm
P. Qty.
Thickness (t) Width (B)
Length (L1)
Length 2 (L2)
Diameter of hole (RL)
10
50 mm
40 mm 13 mm
Surface
Flake zinc silver
0.261 kg Steel
VARIFIX® FLAT HINGE CONNECTOR WITH SLOT — C2C
Art. No.
0862 005 191
Suitable for mounting rail
41 x 124 mm, 41 x 82 mm, 41 x 62 mm, 41 x 44 mm, 41 x 41 mm, 41 x 22 mm, 41 x 86 mm, 41 x 128 mm
P. Qty.
Thickness (t) Width (B)
STEP - 2018-03-20 - 20385 - ©
10
4 mm
50 mm
Length (L1)
196 mm
Hole distance (LA1)
113 mm
Elongated hole width (LB)
14 mm
Length 2 (L2)
Elongated hole length (LL) Weight
Surface
Material
36
Application area • Corner connections • Bracket structures and free structures
115 mm
70 mm
Material
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
4 mm
Hole distance (LA1)
Weight
Freely adjustable to every angle from 0-180°
80 mm
55 mm
0.335 kg
Flake zinc silver Steel
Freely adjustable to every angle from 0-180° Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Application area • Corner connections • Bracket structures and free structures
VARIFIX® HINGE CONNECTOR VARIO - C2C
Freely adjustable on both sides to every angle from 0–90° Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Illustration only Suitable for mounting rail Width (B)
Height (H) Surface
Material
41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm 40 mm 74 mm
Galvanised Steel
Art. No.
0862 005 181
0862 005 183
Permissible load
5 kN
10 kN
P. Qty.
Thickness (t)
10
4 mm
10
6 mm
Length (L1)
55 mm
62 mm
Diameter of hole (RL)
13 mm
18 mm
Length 2 (L2) Weight
65 mm 480 g
STEP - 2018-03-07 - 21174 - ©
Application area Universal fastening, e.g. of pipelines, air ducts or electrical conduits, to sloping ceilings using threaded rods. For struts and braces, e.g. for longer bracket arms. Securing of high-pressure drain pipes.
37
75 mm 660 g
VARIFIX® HINGE CONNECTOR - C2C
• Adjustable angle • For longer bracket arms with strut Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Thickness (t)
4 mm
Length 2 (L2)
146 mm
Profile thickness (tP)
4 mm
Diameter of hole (RL)
13 mm
Profile length (LP)
135 mm
Hole distance (LA1)
35 mm
Material
Steel
Surface
Galvanised
Art. No.
0862 005 172 0862 005 173
Suitable for mounting rail
36 x 36 mm
P. Qty.
Width (B)
Length (L1)
Profile width (BP)
Profile height (HP)
Hole distance 2 (LA2)
Weight
1
35.5 mm
125 mm
37.5 mm 36 mm
93 mm 709 g
STEP - 2017-01-09 - 20394 - ©
Application area For fastening pipelines, air ducts or electrical conduits to sloping ceilings.
38
1
41 x 41 mm, 41 x 22 mm, 41 x 44 mm, 41 x 62 mm 38 mm
128 mm 42 mm
41 mm
96 mm 774 g
VARIFIX® LOCKABLE HINGE CONNECTOR - C2C
Variable and lockable adjustable angle For longer bracket arms with strut Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Art. No.
0862 005 176
Suitable for mounting rail
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm
P. Qty.
Thickness (t) Width (B)
1
4 mm
41.5 mm
Length (L1)
128 mm
Profile width (BP)
42 mm
Length 2 (L2)
171 mm
Profile thickness (tP)
4 mm
Profile length (LP)
160 mm
Profile height (HP)
Diameter of hole (RL)
41 mm
13 mm
Hole distance (LA1)
35 mm
Weight
1062 g
Hole distance 2 (LA2) Surface
Material
96 mm
Galvanised Steel
STEP - 2017-01-09 - 20395 - ©
Application area For fastening pipelines, air ducts or electrical conduits to sloping ceilings.
39
MWF - 12/14 - 19450 - ©
40
0862 064 099
0057 8 25
0057 10 25
0057 10 35
0407 8
0407 10
0411 8 40
0411 10 303
0862 100 003
M8x25 Hexagon Bolt FK 8.8
M10x25 Hexagon Bolt FK 8.8
M10x35 Hexagon Bolt FK 8.8
8.4x16x1.6 Washer DIN 125
10.5x20x2.0 Washer DIN 125
8.5x40x2.0 Wing Repair Washer DIN 522
10.5x30x3.0 Wing Repair Washer DIN 522
M8x40 Hammer-Head Fastener 26/28
0862 001 223 3
M10 Combination Sliding Nut 26/28
0862 001 003 2
0862 064 098
0862 001 222 3
M8 Combination Sliding Nut 26/28
0862 001 002 2
C-Mounting Rail 28/28/1.75
0862 001 221 3
C-Mounting Rail 26/26/1.25
0862 001 001 2
C-Mounting Rail 26/18/1.25
Profile Base
■
■
■
■ ▲
■ ▲
■ ▲
●
Crosswise Profile Base
■
■
■
■ ▲
■ ▲
■ ▲
●
End Bracket
■
■
■
■ ▲
■ ▲
■ ▲
●
Crosswise End Bracket
■
■
■
■ ▲
■ ▲
■ ▲
●
Rail Connector, pre-mounted
■
■
■
Bracket Connector
■
■
■
Art. No.
Connecting elements
Picture
Art. No.
Legend ■ Standard solution □ conditional ● Alternative solution ▲ Standard solution for screwing in the hole side of the mounting rail △ Alternative solution for screwing in the hole side of the mounting rail
m
RECOMMENDED CONNECTING ELEMENTS IN THE VARIFIX® C-MOUNTING RAIL SYSTEM 26/28
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, straight, 3 round holes
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, straight, 4 round holes
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Triangular Bracket
■
■
■
■ ▲
■ ▲
■ ▲
●
Frame Bracket
■
■
■
■ ▲
■ ▲
■ ▲
●
Connecting Bracket 90°, 3 slots
■
■
■
■ ▲
■ ▲
■ ▲
●
Connecting Bracket 45°, 4 slots
■
■
■
■ ▲
■ ▲
■ ▲
●
Connecting Bracket 90°, premounted
■
■
■
Connecting Bracket 45°, premounted
■
■
■
MWF - 12/14 - 19451 - ©
41
0057 12 25
0057 12 35
0407 8
0407 10
M12x25 Hexagon Bolt FK 8.8
M12x35 Hexagon Bolt FK 8.8
8.4x16x1.6 Washer DIN 125
10.5x20x2.0 Washer DIN 125
□ △
□ △
0411 8
8.5x40x2.0 Wing Repair Washer DIN 522 10.5x30x3.0 Wing Repair Washer DIN 522 13.0x26x2.5 Wing Repair Washer DIN 522
0862 100 020
0057 10 35 M10x35 Hexagon Bolt FK 8.8 □ △
M10x40 Hammer-Head Fastener 36/36
0057 10 25 M10x25 Hexagon Bolt FK 8.8 ■ ▲
0411 12 26
0057 8 M8x25 Hexagon Bolt FK 8.8 □ △
0411 10 303
0862 064 102 M12 Combination Sliding Nut 36/41
■ ▲
40
0862 064 101 M10 Combination Sliding Nut 36/41
□ △
25
0862 064 100 M8 Combination Sliding Nut 36/41
0862 001 004 2
0862 001 224 0862 001 230
Art. No.
3 6
Art. No.
C-Mounting Rail 36/36/2.5
Image
Connecting elements
Legend ■ Standard solution □ conditional ● Alternative solution ▲ Standard solution for screw connection in the hole side of the mounting rail △ Alternative solution for screw connection in the hole side of the mounting rail
m
RECOMMENDED CONNECTING ELEMENTS IN THE VARIFIX® C-INSTALLATION RAIL SYSTEM 36
Profile Base
■
□ △
■ ▲
●
Crosswise Profile Base
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
End Bracket
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
■ ▲
Crosswise End Bracket
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
■ ▲
Rail Connector, pre-mounted
■
Bracket Connector
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
■ ▲
Flat Connector, straight, 3 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, straight, 4 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, L-shaped, 3 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, T-shaped, 4 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, L-shaped, 4 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Flat Connector, T-shaped
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Triangular Bracket
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Frame Bracket
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
●
MWF - 12/14 - 19452 - ©
42
0057 12 25
0057 12 35
0407 8
0407 10
M12x25 Hexagon Bolt FK 8.8
M12x35 Hexagon Bolt FK 8.8
8.4x16x1.6 Washer DIN 125
10.5x20x2.0 Washer DIN 125
□ △
□ △
0411 8
8.5x40x2.0 Wing Repair Washer DIN 522 10.5x30x3.0 Wing Repair Washer DIN 522 13.0x26x2.5 Wing Repair Washer DIN 522
0862 100 020
0057 10 35 M10x35 Hexagon Bolt FK 8.8 □ △
M10x40 Hammer-Head Fastener 36/36
0057 10 25 M10x25 Hexagon Bolt FK 8.8 ■ ▲
0411 12 26
0057 8 M8x25 Hexagon Bolt FK 8.8 □ △
0411 10 303
0862 064 102 M12 Combination Sliding Nut 36/41
■ ▲
40
0862 064 101 M10 Combination Sliding Nut 36/41
□ △
25
0862 064 100 M8 Combination Sliding Nut 36/41
0862 001 004 2
0862 001 224 0862 001 230
Art. No.
3 6
Art. No.
C-Mounting Rail 36/36/2.5
Image
Connecting elements
Legend ■ Standard solution □ conditional ● Alternative solution ▲ Standard solution for screw connection in the hole side of the mounting rail △ Alternative solution for screw connection in the hole side of the mounting rail
m
RECOMMENDED CONNECTING ELEMENTS IN THE VARIFIX® C-INSTALLATION RAIL SYSTEM 36
Connecting Bracket 90°, 2 round holes
■
□ △
■ ▲
●
Connecting Bracket 90°, 4 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Connecting Bracket 90°, 3 slots
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Connecting Bracket 45°, 4 slots
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Connecting Bracket 45°, 4 round holes
■
□ △
■ ▲
□ △
■ ▲
□ △
□ △
□ △
□ △
■ ▲
●
Connecting Bracket 90°, pre-mounted
■
Connecting Bracket 45°, pre-mounted
■
Hinge Connectors
■
□ △
■ ▲
□ △
□ △
■ ▲
□ △
□ △
■ ▲
□ △
Jointed Connector, flat
■
□ △
■ ▲
□ △
□ △
■ ▲
□ △
□ △
■ ▲
□ △
Jointed Connector, Vario
■
■ ▲
□ △
■ ▲
■ ▲
C-Mounting Rail 41/41/1.8
C-Mounting Rail 41/41/2.5
C-Mounting Rail 40/45/1.75
C-Mounting Rail 41/44/2.5
C-Mounting Rail 41/62/3.0
C-Mounting Rail 41/82/2.5
■
■
■
■
■
■
■
■
Crosswise Profile Base
■
■
■
■
■
■
■
Profile Base with Large Base Plate
■
■
■
■
■
■
■
End Bracket
■
■
■
■
■
■
Crosswise End Bracket
■
■
■
■
■
■
Rail Connector, pre-mounted
■
■
■
■
■
■
■
■
■
■
■
MWF - 12/14 - 19453 - ©
Rail Connector, heavy
43
C-Mounting Rail 41/124/3.0 M8 Combination Sliding Nut 36/41 M10 Combination Sliding Nut 36/41 M12 Combination Sliding Nut 36/41 M8x25 Hexagon Bolt FK 8.8 M10x25 Hexagon Bolt FK 8.8 M10x35 Hexagon Bolt FK 8.8 M12x25 Hexagon Bolt FK 8.8 M12x35 Hexagon Bolt FK 8.8 8.4x16x1.6 Washer DIN 125 10.5x20x2.0 Washer DIN 125 8.4x40x3.0 Wing Repair Washer DIN 522 10.5x30x3.0 Wing Repair Washer DIN 522 13.0x26x2.5 Wing Repair Washer DIN 522 M10x40 Hammer-Head Fastener 41/x M12x30 Hammer-Head Fastener 41/x M12x40 Hammer-Head Fastener 41/x
C-Mounting Rail 41/22/2.5
0862 001 233 0862 001 235 0862 001 005 0862 001 225 0862 001 229 0862 001 007 0862 001 227 0862 001 237 0862 001 006 0862 001 226 0862 001 231 0862 001 680 0862 001 681 0862 001 684 0862 001 250 0862 001 251 0862 001 232 0862 001 236 0862 001 239 0862 001 234 0862 064 100 0862 064 101 0862 064 102 0057 8 25 0057 10 25 0057 10 35 0057 12 25 0057 12 35 0407 8 0407 10 0411 8 243 0411 10 303 0411 12 26 0862 100 040 0862 100 050 0862 100 051 C-Mounting Rail 41/22/1.8
Art. No.
Profile Base
Art. No.
Connecting elements
Image
3 6 2 3 6 2 3 6 2 3 6 2 3 6 3 6 6 3 6 6
Legend ■ Standard solution □ conditional ● Alternative solution ▲ Standard solution for screw connection in the hole side of the mounting rail △ Alternative solution for screw connection in the hole side of the mounting rail
m
RECOMMENDED CONNECTING ELEMENTS IN THE VARIFIX® C-INSTALLATION RAIL SYSTEM 41
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
■
■
■
■
□ ■ △ ▲
□ ■ □ △ ▲ △
□ □ □ ■ △ △ △ ▲
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Bracket Connector
■
■
■
■
■
Flat Connector, straight, 3 round holes
■
■
■
■
■
■
■
■
Flat Connector, straight, 4 round holes
■
■
■
■
■
■
■
Flat Connector, L-shaped, 4 round holes
■
■
■
■
■
■
Flat Connector, T-shaped
■
■
■
■
■
Rail Connector, T-shaped, with slot
■
■
■
■
Rail Connector, T-shaped, with round hole
■
■
■
■
44
0862 001 233 0862 001 235 0862 001 005 0862 001 225 0862 001 229 0862 001 007 0862 001 227 0862 001 237 0862 001 006 0862 001 226 0862 001 231 0862 001 680 0862 001 681 0862 001 684 0862 001 250 0862 001 251 0862 001 232 0862 001 236 0862 001 239 0862 001 234 0862 064 100 0862 064 101 0862 064 102 0057 8 25 0057 10 25 0057 10 35 0057 12 25 0057 12 35 0407 8 0407 10 0411 8 243 0411 10 303 0411 12 26 0862 100 040 0862 100 050 0862 100 051 C-Mounting Rail 41/41/1.8
C-Mounting Rail 41/41/2.5
C-Mounting Rail 40/45/1.75
C-Mounting Rail 41/44/2.5
C-Mounting Rail 41/62/3.0
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Rail Connector 4D, with slot
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Triangular Bracket
■
■
■
■
■
■
■
■
■
Frame Bracket
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Strap Bracket, left
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Strap Bracket, right
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 90°, 2 round holes
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 90°, 4 round holes
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 90°, 3 slots
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 90°, 3 round holes
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 45°, 4 slots
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 45°, 4 round holes
■
■
■
■
■
■
■
■
■
□ ■ △ ▲
□ □ ■ □ △ △ ▲ △
□ △
□ ■ □ ● □ △ ▲
Connecting Bracket 90°, pre-mounted
■
■
■
■
■
■
■
■
■
Connecting Bracket 45°, pre-mounted
■
■
■
■
■
■
■
■
■
C-Mounting Rail 41/82/2.5
C-Mounting Rail 41/22/2.5
C-Mounting Rail 41/124/3.0 M8 Combination Sliding Nut 36/41 M10 Combination Sliding Nut 36/41 M12 Combination Sliding Nut 36/41 M8x25 Hexagon Bolt FK 8.8 M10x25 Hexagon Bolt FK 8.8 M10x35 Hexagon Bolt FK 8.8 M12x25 Hexagon Bolt FK 8.8 M12x35 Hexagon Bolt FK 8.8 8.4x16x1.6 Washer DIN 125 10.5x20x2.0 Washer DIN 125 8.4x40x3.0 Wing Repair Washer DIN 522 10.5x30x3.0 Wing Repair Washer DIN 522 13.0x26x2.5 Wing Repair Washer DIN 522 M10x40 Hammer-Head Fastener 41/x M12x30 Hammer-Head Fastener 41/x M12x40 Hammer-Head Fastener 41/x
Art. No.
Rail Connector 3D, with slot
Art. No.
Connecting elements
C-Mounting Rail 41/22/1.8
MWF - 12/14 - 19454 - ©
Image
3 6 2 3 6 2 3 6 2 3 6 2 3 6 3 6 6 3 6 6
Legend ■ Standard solution □ conditional ● Alternative solution ▲ Standard solution for screw connection in the hole side of the mounting rail △ Alternative solution for screw connection in the hole side of the mounting rail
m
RECOMMENDED CONNECTING ELEMENTS IN THE VARIFIX® C-INSTALLATION RAIL SYSTEM 41
□ ■ △ ▲
□ ■ □ △ ▲ △
□ □ □ ■ △ △ △ ▲
MWF - 12/14 - 19455 - ©
Picture
45 C-Mounting Rail 41/22/1.8 C-Mounting Rail 41/22/2.5
C-Mounting Rail 41/41/1.8
C-Mounting Rail 41/41/2.5
C-Mounting Rail 40/45/1.75 C-Mounting Rail 41/44/2.5 C-Mounting Rail 41/62/3.0
Art. No.
Angle Connector 90°, 4 slots ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
Angle Connector 90°, 8 slots ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
Angle Connector 45°, 4 slots ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
Angle Connector 45°, 8 slots ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
Hinge Connectors ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
Jointed Connector, flat ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
Jointed Connector, Vario ■ ■ ■ ■ ■ ■ ■ □ ■ △ ▲ □ □ ■ □ △ △ ▲ △ □ △ □ ■ □ ● □ △ ▲
0862 001 233 0862 001 235 0862 001 005 0862 001 225 0862 001 229 0862 001 007 0862 001 227 0862 001 237 0862 001 006 0862 001 226 0862 001 231 0862 001 680 0862 001 681 0862 001 684 0862 001 250 0862 001 251 0862 001 232 0862 001 236 0862 001 239 0862 001 234 0862 064 100 0862 064 101 0862 064 102 0057 8 25 0057 10 25 0057 10 35 0057 12 25 0057 12 35 0407 8 0407 10 0411 8 243 0411 10 303 0411 12 26 0862 100 040 0862 100 050 0862 100 051 3 6 2 3 6 2 3 6 2 3 6 2 3 6 3 6 6 3 6 6 C-Mounting Rail 41/124/3.0 M8 Combination Sliding Nut 36/41 M10 Combination Sliding Nut 36/41 M12 Combination Sliding Nut 36/41 M8x25 Hexagon Bolt FK 8.8 M10x25 Hexagon Bolt FK 8.8 M10x35 Hexagon Bolt FK 8.8 M12x25 Hexagon Bolt FK 8.8 M12x35 Hexagon Bolt FK 8.8 8.4x16x1.6 Washer DIN 125 10.5x20x2.0 Washer DIN 125 8.4x40x3.0 Wing Repair Washer DIN 522 10.5x30x3.0 Wing Repair Washer DIN 522 13.0x26x2.5 Wing Repair Washer DIN 522 M10x40 Hammer-Head Fastener 41/x M12x30 Hammer-Head Fastener 41/x M12x40 Hammer-Head Fastener 41/x
C-Mounting Rail 41/82/2.5
Art. No.
m
Legend ■ Standard solution □ conditional ● Alternative solution ▲ Standard solution for screwing in the hole side of the mounting rail △ Alternative solution for screwing in the hole side of the mounting rail
Connecting elements
RECOMMENDED CONNECTING ELEMENTS IN THE VARIFIX® C-INSTALLATION RAIL SYSTEM 41
VARIFIX® CLAMPING FLANGE - C2C
For fastening in steel supports without drilling or welding Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Length (L)
90 mm
Material thickness (t)
6 mm
Width (B)
Permissible vertical load Surface
Material
Thread type
45 mm 2100 N
Galvanised Steel
Metric thread
Art. No.
0862 006 204
0862 006 205
Suitable for mounting rail
41 x 22 mm
41 x 41 mm
P. Qty.
Product weight (per item)
STEP - 2018-03-20 - 17395 - ©
Application area For clamping mounting of mounting rails in steel supports. Always use clamping flanges in pairs (1 packing unit = 1 pair).
46
10
515 g
10
520 g
Notice The mounting crews are to be tightened with a torque of 10 Nm.
VARIFIX® TENSIONING CLAMP - C2C
For fastening C-assembly rails to steel supports without drilling and welding. Secure assembly Two-hole design
Length (L)
45 mm
Material
Steel
Height (H)
45 mm
Surface
Art. No. P. Qty.
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Galvanised
0862 005 101 10
0862 005 102 10
0862 005 105
0862 005 106
0862 005 107
0862 005 108
36 x 36 mm, 41 x 22 mm, 41 x 41 mm, 41 x 44 mm
41 x 62 mm
41 x 124 mm
80 mm
80 mm
80 mm
95 mm
110 mm
170 mm
25
Suitable for mounting rail
41 x 86 mm
41 x 128 mm
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
Width (B)
80 mm
80 mm
70 mm
Length of stirrup piece (LB)
140 mm
180 mm
70 mm
Thickness (t)
Bracket width (BB)
Thread type x nominal diameter (G) Weight
Nominal diameter
6 mm
STEP - 2018-03-20 - 17397 - ©
4 mm
6 mm
20
6 mm
10
6 mm
53 mm
53 mm
40 mm
53.5 mm
55 mm
55 mm
M10
M10
M6
M8
M10
M10
383 g
409 g
162 g
271 g
341 g
395 g
10 mm
Notice Two tensioning clamps per steel support should always be used.
47
6 mm
20
10 mm
6 mm
8 mm
10 mm
10 mm
VARIFIX® KNOCK-IN BEAM CLAMP - C2C
No screws required for fastening – simply wedges itself in when knocked into the steel support • No twisting when setting the knock-in beam clamp • Fast and safe installation and removal possible • Both sides can be used, depending on material thickness • VdS certified for dimensions M8 - M16 • FM approval for dimensions M10 - M16
Surface
Galvanised
Material
Steel with high yield stress, 1.0935
Art. No.
0862 200 100 0862 200 101 0862 200 102 0862 200 103
P. Qty.
25
Length (L)
112 mm
Width (B)
17.2 mm
Height (H)
65 mm
Thickness (t)
Grip width (Bk)
Min./max. grip range
Permissible load
Suitable for threaded rods
Weight
2 mm
13.2 mm
8-20 mm
2000 N
M8
159 g
Application area For mounting pipes, sprinkler systems and ventilation ducts on T-beams, U-profiles and angle profiles. For all steel supports up to a max. incline of 14%.
STEP - 2014-12-01 - 17398 - ©
Approval number 3050127
48
Approval number G413047
25
112 mm
19.2 mm
65 mm
2 mm
15.2 mm
8-20 mm
3500 N
M10
163 g
25
112 mm
21.2 mm
65 mm
2 mm
17.2 mm
8-20 mm
5000 N
M12
167 g
16
111 mm
29.8 mm
70 mm
3 mm
24 mm
11-27 mm
10000 N
M16
292 g
Instructions Press the wedge onto the beam clamp as far as possible by hand. The wedge must always be put underneath the flange. Using a hammer, strike the dualwedge until it can be driven no further. The scale on the wedge is used for monitoring.
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® BEAM CLAMP, STANDARD - C2C
Material
Malleable cast iron
Art. No.
0862 200 001
Surface
P. Qty.
Permissible load
0862 200 003
25
0862 200 005
10
0862 200 007
10
Thread type x nominal diameter (G)
2500 N
2500 N
3500 N
5500 N
M8
M10
M12
M16
Length (L)
50 mm
Grip height (HK) Height (H)
Width (B)
Product weight (per item)
23.7 mm
45 mm
21 mm
151 g
Can be stored in ORSY system
Application area For mounting pipes, sprinkler systems and ventilation ducts on T-beams, U-profiles and angle profiles
STEP - 2018-03-07 - 17399 - ©
Notice Beam clamps can always be secured with a securing tab. For sprinkler systems, applicable VdS requirements prescribe that beam clamps must be secured if the mounted pipe has a diameter larger than DN 65 mm.
49
• VdS certified and authorised for use in construction of stationary fire extinguishing systems • FM approval (except M8) • With hexagonal adjustment screw DIN933/8.8; end of screw has a ring cutter Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Galvanised
25
With threaded hole
21 mm
44 mm
42 mm
21.6 mm
144 g
26 mm
57.5 mm
54 mm
24 mm
218 g
29 mm
58 mm
58 mm
30 mm
340 g
VARIFIX® BEAM CLAMP, STANDARD - C2C
Material
Art. No. P. Qty.
Galvanised
0862 200 002 0862 200 004 0862 200 006 0862 200 008
25
25
10
10
Permissible load
2500 N
2500 N
3500 N
5500 N
Diameter of hole (RL)
9 mm
11 mm
13 mm
17 mm
Grip height (HK) Length (L)
Height (H)
Width (B)
Product weight (per item)
24 mm
50 mm
45 mm
20.5 mm
143 g
20 mm
44 mm
41.5 mm
21.5 mm
144 g
27.5 mm
58 mm
54 mm
24 mm
217 g
29 mm
58 mm
57.5 mm
29.5 mm
333 g
Can be stored in ORSY system
STEP - 2018-01-30 - 22323 - ©
Application area For mounting pipes, sprinkler systems and ventilation ducts on T-beams, U-profiles and angle profiles
50
• VdS certified and authorised for use in construction of stationary fire extinguishing systems • FM approval • With hexagonal adjustment screw DIN933/8.8; end of screw has a ring cutter Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Malleable cast iron
Surface
With unthreaded through hole
Notice Beam clamps can always be secured with a securing tab. For sprinkler systems, applicable VdS requirements prescribe that beam clamps must be secured if the mounted pipe has a diameter larger than DN 65 mm.
VARIFIX® BEAM CLAMP COMPACT - C2C
With threaded hole • VdS certified and authorised for use in construction of stationary fire extinguishing systems. • With hexagonal adjustment screw DIN933/8.8; end of screw has a ring cutter • With reduced dimensions for electrical installation
Art. No.
0862 200 015
Material
Malleable cast iron
P. Qty.
Surface
Permissible load
Thread type x nominal diameter (G) Grip height (HK) Length (L)
Height (H) Width (B)
Max. grip range
Product weight (per item)
25
Galvanised 1200 N M8
19 mm
38.5 mm 36.4 mm 19 mm 18 mm 84.4 g
Can be stored in ORSY system
Related products
Securing tab for beam clamp - C2C
STEP - 2018-03-07 - 20300 - ©
Application area For mounting pipes, sprinkler systems and ventilation ducts on T-beams, U-profiles and angle profiles
51
Art. No.
0862 200 010
Notice Beam clamps can always be secured with a securing tab. For sprinkler systems, applicable VdS requirements prescribe that beam clamps must be secured if the mounted pipe has a diameter larger than DN 65 mm.
Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
VARIFIX® BEAM CLAMP COMPACT - C2C
With unthreaded through hole • VdS-authorised and approved for use in construction of stationary fire extinguishing systems. • With hexagon adjusting screw DIN933/8.8; screw end with ring cutter • With reduced dimensions for electrical installation
Art. No.
0862 200 016
Material
Malleable cast iron
P. Qty.
Surface
Permissible load Grip height (HK)
Diameter of hole (RL) Length (L)
Height (H) Width (B)
Max. grip range
Product weight (per item) Can be stored in ORSY system
STEP - 2018-03-06 - 22394 - © Following page 22395
Application area For mounting pipes, sprinkler systems and ventilation ducts on T-beams, U-profiles and angle profiles
52
25
Zinc plated 1200 N
18.7 mm 9 mm
38 mm 37 mm 19 mm 18 mm 81.4 g
Notice Beam clamps can always be secured with a securing tab. For sprinkler systems, applicable VdS requirements prescribe that beam clamps must be secured if the mounted pipe has a diameter larger than DN 65 mm.
SECURING TAB FOR BEAM CLAMP - C2C
Suitable for M8, M10, M12 and M16 Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Thickness (t)
3.0 mm
Distance 2 (A2)
19 mm
Distance 1 (A1) Surface
Material
Notice Please note! M16 can be supplied upon special request.
14.5 mm Galvanised
Hot-galvanised steel sheet, 1.0226
Art. No.
0862 200 010
0862 200 011
Length (L)
350 mm
400 mm
P. Qty.
Width (B)
25
25
25 mm
40 mm
Diameter of hole (RL1)
10.5 mm
12.5 mm
Product weight (per item)
188 g
356 g
Diameter of hole 2 (RL2)
12.5 mm
17.0 mm
VARIFIX® SUPPORT CLIP TS - C2C
Diameter of hole (RL)
13 mm
Width (B)
40 mm
Length (L)
Thickness (t) Surface
STEP - 2018-03-07 - 20301 - ©
Material Grip range (k)
10 mm
15 mm
20 mm
25 mm
Application area For fastening mounting rails to H-beams or T-beams with a flange thickness of 10-25 mm
45 mm 6 mm
Galvanised Steel
Product weight (per item)
100 g
104 g
120 g
123 g
Compatible with ORSY storage system
53
• Hole diameter: 13 mm, for threaded rods or screws up to M12 • Grade 4.6 load capacity: 10 kN, grade 5.6 load capacity: 12 kN • Secured with combination sliding nut Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Art. No.
0862 005 090
0862 005 091
0862 005 092
0862 005 093
P. Qty.
20
20
10
10
VARIFIX® COMBINATION SLIDING NUT - C2C
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
Length (L)
23 mm
Width (B)
Fits all rails of type 26 and 28 Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
22.5 mm
Thickness (t)
5 mm
Surface
Galvanised
Material
Steel
Art. No.
0862 064 098
0862 064 099
Thread type x nominal diameter (G)
M8
M10
P. Qty.
Product weight (per item)
100
17.6 g
50
17 g
Can be stored in ORSY system
VARIFIX® COMBINATION SLIDING NUT - C2C
Suitable for mounting rail Width (B)
Length (L)
Thickness (t) Surface
STEP - 2018-03-20 - 20302 - ©
Material
Fits all rails of type 36 and 41 Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 36 x 36 mm, 41 x 128 mm, 41 x 86 mm 29 mm 33 mm 6 mm
Galvanised Steel
Thread type x nominal diameter Product weight (per item) (G)
Art. No.
P. Qty.
M10
0862 064 101
M8
42 g
0862 064 100
100
M12
38 g
0862 064 102
100
M16
Can be stored in ORSY system
54
41 g
37 g
0862 064 103
100
100
VARIFIX® RETAINING CLIP - C2C
Height (H)
10 mm
Surface
Galvanised
Material
Art. No.
P. Qty.
0862 005 150
100
0862 005 151
100
10.5 mm
10.5 mm
Suitable for mounting rail
26 x 18 mm, 26 x 26 mm, 28 x 28 mm
36 x 36 mm
Width (B)
Thickness (t)
Weight
25 mm
32 mm
2 mm
16 g
STEP - 2018-03-07 - 20303 - ©
Application area To stabilise the c-assembly rails in conjunction with hammer head bolts or hammer head fasteners.
55
Prevents the sides of the C rail from bending upwards when loaded Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Steel
Diameter of hole (RL)
Length (L)
The safe alternative to washers
30 mm
42 mm
2 mm
26 g
0862 005 152
100
10.5 mm
41 x 22 mm, 41 x 41 mm, 41 x 124 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm
30 mm
45 mm
3 mm
38 g
0862 005 153
100
13 mm
41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 22 mm, 41 x 41 mm, 41 x 128 mm, 41 x 86 mm
30 mm
45 mm
3 mm
37 g
VARIFIX® RETAINING CLIP, HEAVY-DUTY - C2C
Illustration only Suitable for mounting rail Width (B)
Length (L)
Thickness (t) Height (H) Material Surface
41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 124 mm, 41 x 128 mm, 41 x 86 mm 29 mm 53 mm 6 mm
10 mm Steel
Galvanised
Art. No.
0862 005 154
0862 005 155
0862 005 156
Diameter of hole (RL)
11 mm
14 mm
17 mm
P. Qty.
Weight
25
86 g
STEP - 2017-12-08 - 22318 - ©
Application area To stabilise the C-assembly rails in conjunction with hammer head bolts or hammer head fasteners.
56
25
85 g
25
85 g
The safe alternative to washers Prevents the sides of the C rail from bending upwards when loaded Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
FASTENING EXAMPLES FOR VARIFIX® RAILS WITH RETAINING CLIPS
Fastening with Screw Anchor for C-Profiles 41
MWF - 01/20 - 12566 - ©
Fastening with Fixing Anchor W/FA-S M10 for C-Profiles 41
57
58
MOUNTING & CONNECTOR EQUIPMENT Würth Limited Würth Centre Mdina Road Zebbug, ZBG9016 Malta Tel. +356 2149 4604 eshop.wuerth.com.mt sales@wuerth.com.mt
© by Würth Limited All rights reserved. Editor: Marketing Department - Würth MT
Our general terms and conditions of sale, delivery and payment apply. They can be found at eshop.wuerth.com.mt Reprint only with prior permission MP033.21 We reserve the right to make any changes we deem necessary to improve the quality of a product, even without prior announcement or notification. Illustrations include sample illustrations and may differ in appearance from the actual goods delivered. Errors excepted. We do not accept any liability for printing errors.