Tips for Cell Phone Refurbishing Cell phone refurbishing is very common for technician whom do cell phone repair business. There are plenty of tools for the process to allow successful operation. How to use them properly and what tips you need to keep in mind? For minimizing the damage and get more profits, this article will list some tips for you! First, let's know the main tools for refurbishing a cell phone: Laminiting tool, tape, separating machine,etc. These tools are essential if you want have a perfect solution for cell phone disassembly. What you should pay attention more?
Bezel Disassembly 1. You may cut the 4 corners with 60W pre-heated POL film removing gun when disassemble iPhone 6 series, and directly disassemble the bezel after heated when repair iPhone 5 series. Because iPhone 6 series bezel is tighter than the iPhone 5s series. 2. Cover the screen with heat resistant tape 3. Disassemble the bezel after heated by seperating machine LCD Disassembly 1. Separate from the bottom side of the LCD 2. For terribly cracked glass, put the glass side up and separate from the head 3. Better to remove residual bezel adhesive by razor blade to avoid POL damage POL Removing
1. Cut an opening with the razor blade. 2. Stop the blade when near the very end and leave a little residual of POL Glue Removing 1. Use brush to apply a small amount of POL adhesive cleaner, pass it along the LCD, do not circle. 2. As for the selection of POL adhesive remover, 8222 is better than LCM Glue Liquid Cleaner. 3. Remove anti-explosion glue to avoid LCD damage and air bubble. OCA/POL Laminating 1. When adjust control valve for various types of LCDs, please do not touch the blue contactor to protect your hand from injury. 2. Align the OCA/POL with the panel to the proper position. 3. Note the intensity should be moderate. Too much strength will cause LCD damage while too
Glass Laminating Don' t press the LCD after aligned in case the generation of bubbles. Backlight Replacing 1. Disassemble from one corner to another corner 2. Clear the appearance with N-hexane 3. The solder joint should be full and bright. Do some preparation well before refurbishing cell phones and be careful with the whole operation.
Good
luck to your cell phone repairs. Any questions you may leave reviews at Vip Fix Shop Team.