Easy Upgrade The iPhone Memory From 16GB to 128GB

Easy Upgrade The iPhone Memory From 16GB to 128GB The iPhone memory upgrade is actually a viable means of bypassing passcode entry limits on an Apple iPhone.

What's more, the technique, which involves soldering off the phone's flash memory chip, can be used on any model of iPhone up to the iPhone 6 Plus, which use the same type of LGA60 NAND chip. Later models, however, will require more sophisticated equipment to programmer.

Tips: 1. The PCIE NAND Flash Chip Programmer involved is mainly applied to iPhone 6s / 6s Plus / SE / iPad Pro. 2. This upgrade work is required the skilled repair-man and not be suitable for doing at home.

3. It’s suitable for upgrading iPhone 6s internal memory.

4. It has Hi-speed performance, and the same fast speed as previous 16GB. 5. Apple official after-sales support does not accept the phone repaired by third-party.

6. There is a possible risk for the upgraded iPhone. If this upgrade iphone storage technology was widely applied, Apple official may take some measures to stop this.

7. This iphone 6s memory upgrade process involves an easy-to-use but powerful tool

PCIE NAND Flash Memory Chip Programmer for Apple Devices that will enable you to write previous data into the brand new flash drive. The operation generally follows these main steps: 1. Connect the PCIE NAND Flash Chip Programmer with computer through 2 USB-to-Lightening data cable , then press the on/off button.

2. Sign in the "WL Software", select the specific disk type "PCIE Disk".

3. Click "Refresh Port", then “Open Port” to be prepared for data writing.

4. Install the old Nand flash chip and press the reset button

5. Click "All Data Query" to read and check whether the information queried is correct.

6. Then “back the original data” by software at a regular

path.

7. Take out the old flash chip, install the brand new one instead.

8. Press the "Reset" button, then select the specific model iPhone 6s, click "write bottom".

9. Click "Write all disk data" to write iPhone 6s data to a brand new 128G flash drive with the PCIE NAND Flash Chip Programmer.

10. "All data query" to check if the data writing operation successful.

11. Bonding the new flash drive onto the motherboard.

12. Install motherboard to the phone body, and then install LCD screen.

13. Restore iPhone via iTunes then activate it.

14. Test and verify the upgraded storage.

3 major practical applications of this tool: Upgrade iPhone Storage, Unlock iPad and WiFi Module Repair.

The above-mentioned is only one of them.

By the way, welcome to shop the upgrade iphone storage tools on vipfixphone.com.