DIGITAL DESIGN + FABRICATION SM1, 2016 M1 JOURNAL - YOUR PROJECT TITLE Yang Feng
737358 Joshua Batterham Russo/Group 7
1
Measured Drawings
the figure shown in rhino
Top section
At beginning, i start to use rule to meaure the length anddiameter for different parts for the rocket model, after using rhino, it is a good way to measure the objects by using analyze on tool bar in rhino.
Elevation Height: 355mm
2
3
Analysis
i measure the length, width and diameter. The connections between each parts are also linked by imaginary line.
x3 x3
x6
The notch is important part for this model. All the connections are made by these notch. in my view, each parts use the friction force to stick togther.
4
5
Digital Model
Modeling Process Firstly, I use the command ‘ ExtrudeCrv’ to build the volume from the lines in orignal files and detele all the lines.
Perspective
Front
Seondly, using the tranform in tool bar and Gumball to rotation and move the parts to different position. Also, the command ‘ rotate’ and ‘move’ can be used.
Finally, changing the layers and grouping them together by command’ ‘ group’.
Thirdly, building the backbone and holder and connect them together. what is more, i used the Alt key to make 2 copies when moving it. Top 6
7
Sketch Model
in order to creat the reconfigured objecct, i started to look at the notch in rocket and I build a similar parts in my model by cardboard. By doing sketch model, I found the section & profile is very fexible and it is very easy to change its shapes.
8
9
Sketch Design #1
Sketch Design #2 Open, Cover and Comfort
it looks like very abstract. The main idea of this project is that its can covering u eye and head during sleeping. Also inscreasing the level of comfort by changing the postion and shape of different pats.
10
Semi-closed
In this sketch, all the joints between the planes can be used as the curtain so they can block the personal vision. Also it can be folded and easy to carry. It looks like a helmet and it creats a semi-closed space for personal use
11
Sketch Design #3
Closed system
In this design, i try to build a close system. The body part is like a bed. It can be surrounding your body when you’r sleeping. The head part can connect with body parts in order to creat a closed system, a isolated space for single personal. Finally, considering about material’s property, this projects also can be rolled and easy to carry.
12
13
Appendix
14
15