Guide

to the right cut protection

Your product guide www.guide.eu Skydda PPE AB. Tel +46(0)321-67 73 00. www.skydda.com

The right gloves increase safety and reduce injuries. Cutting injuries now represent a significant risk within many types of work environments and tasks. Costs that affect both the individual and the company can be large if an accident takes place - not to mention the suffering that a cut injury may cause. The range of cut protection gloves has grown rapidly in recent years - not least in Guide. This can sometimes make it difficult to choose the right cut protection glove for your own needs and the risk you're exposed to in your own work. With this in mind Guide has created a easy-to-use product selection matrix which provides a simple and clear overview of which glove that fits what purpose. First you simply select the type of industry that your work fits into. After that, the column that describes the elements of risk / needs that best describe what you do - then you will come to our best recommendation for the glove / gloves that we feel best meets the demands for hand protection that your work requires. It doesn't get much simpler than that!

Gloves for better cut protection in

Waste handling INFECTION

Since it is impossible to know what one encounters in the handling of garbage, this requires a combination of protection against puncture injuries caused for example by needles, as well as cut protection. This is to give the right protection against broken glass, syringes, cans and other materials that can puncture or cut. In addition, there is a significant risk of infection if an accident occurs through being injured by a used needle.

NEEDLES

SHARDS

HAZARDOUS WASTE

Guide HexArmor 7080, a glove made from patented HexArmor® material. Nitrile-dipped palm provides protection against moisture and wear. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4542

Guide HexArmor 4041, the seamed glove made from patented HexArmor® material. Back of hand in spandex for increased flexibility. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4501 Guide HexArmor 3180, the seamed glove made from patented HexArmor® material. Extra-long protection all the way up to the elbow. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4502

Guide HexArmor 3180, the seamed glove made from patented HexArmor® material. Extra-long protection all the way up to the elbow. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4502

GUIDE HEXARMOR 3180

GUIDE HEXARMOR 3041

KNIVES

Guide HexArmor 7080, a glove made from patented HexArmor® material. Nitrile-dipped palm provides protection against moisture and wear. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4542

GUIDE HEXARMOR 7080

GUIDE HEXARMOR 4041

REFUSE COLLECTION

Guide HexArmor 3041, a seamed glove made from patented HexArmor® material. Maximum protection against puncture injury with maximum cut protection.

Guide HexArmor 3041, the seamed glove made from patented HexArmor® material. Maximum protection against puncture injury with maximum cut protection.

CUT PROTECTION CLASS 5. Complies with EN388 - 4502

Gloves for better cut protection in

Metalworking: MILLING AND METAL CHIPS

This environment makes very different demands on the cut protection needed. Sharp edges. Oily surfaces. Welding sparks. Heavy parts - these are some of the typical risks encountered in this type of industry. The combination of sharp edges and oily surfaces require a high degree of cut protection with a good oil grip. Handling of heavy parts also calls for a cut protection glove with high wear resistance, good grip and a slightly thicker glove to protect the hand in the best possible manner.

OILY SURFACES

HEAVY WORK

HEAT & WELDING SPARKS

CHEMICAL PROCESSING

GUIDE 300 WHITE

THIN SHEET METAL

Guide 300, knitted from a polyethylene / polyester yarn. Palm coated with white PU, providing wear resistance and grip. CUT PROTECTION CLASS 3. Complies with EN388 - 4342.

Guide 330, knitted in an aramide yarn. Palm of structured nitrile which gives high abrasion resistance, oil resistance and grip. Also suitable for thermal protection.

GUIDE 330

CUT PROTECTION CLASS 5. Complies with EN388 - 3531, EN407 - X1XX4X

GUIDE 335

Guide 335, knitted in a yarn of polyethylene, glass and polyester. Palm coated with liquid grey nitrile which gives high resistance to abrasion, oil resistance and a good grip. CUT PROTECTION CLASS 5. Complies with EN388 - 4544.

GUIDE 324

Guide 324, seamless knitted glove made from yarn containing steel and aramid. Palm featuring a strong nitrile coating which gives high resistance to wear, good oil resistance and a good grip.

CUT PROTECTION CLASS 5. Complies with EN388 - 4543

GUIDE 303

Guide 303, knitted from a polyethylene / polyester yarn with elastan for increased fingertip sensitivity. Palm coated with grey PU, providing wear resistance and grip. CUT PROTECTION CLASS 5. Complies with EN388 - 4543.

Guide 295, seamless knitted glove made from Kevlar速 yarn. Palm coated with heavy latex which gives a good grip in both dry and wet environments.

GUIDE 295

CUT PROTECTION CLASS 5. Complies with EN388 - 2544

GUIDE 301

Guide 301, knitted in a synthetic yarn with elastan which gives increased comfort. Palm coated with PU / nitrile for gripping on wet & oily surfaces. CUT PROTECTION CLASS 4. Complies with EN388 - 4431. Guide 323, seamless knitted glove made from yarn containing steel and aramid. Palm made from split cowhide, which gives durability, a steady grip and protection against contact heat.

GUIDE 323

CUT PROTECTION CLASS 5. Complies with EN388 - 4543

MAPA KRONIT PROOF 395

GUIDE 300 GREY

Mapa Kronit Proof 395, a unique combination of triple layer technology. Chemical, cut and thermal protection combined to provide a complete glove.

CUT PROTECTION CLASS 5. Complies with EN388 - 4543, EN374: 2003, EN407 - X1XXXX

Guide 300, knitted from a polyethylene / polyester yarn. Palm coated with black PU, providing wear resistance and grip. Silicone-free. CUT PROTECTION CLASS 3. Complies with EN388 - 4342.

Gloves for better cut protection for working with

Glass SOFT COATINGS

GUIDE 300 WHITE

The requirements imposed by actors in the glass industry are often very specific. In addition to providing cut protection the gloves provide a good grip - but not too good. If an accident occurs and a glass section breaks you must be able to quickly release the glass. At the same time the glove must be sufficiently flexible to be able to feel what is happening and to work safely. Some environments are extremely hot. Risk of scratching, the degree of purity of materials in the glove and abrasion strength are other parameters that must be taken into account when selecting gloves.

CRUSHED GLASS

HOT WORK

INSTALLATION

TRANSPORTATION

MAINTENANCE

Guide 300, knitted from a polyethylene / polyester yarn. Palm coated with white PU, providing wear resistance and grip. Silicone-free. CUT PROTECTION CLASS 3. Complies with EN388 - 4342.

GUIDE 302

Guide 302, knitted from a polyethylene / polyester yarn with elastan for increased fingertip sensitivity. Palm coated with grey PU, providing wear resistance and grip. CUT PROTECTION CLASS 3. Complies with EN388 - 4343.

GUIDE 303

Guide 303, knitted from a polyethylene / polyester yarn with elastan for increased fingertip sensitivity. Palm coated with grey PU, providing wear resistance and grip. CUT PROTECTION CLASS 5. Complies with EN388 - 4543. Guide 324, seamless knitted glove made from yarn containing steel and aramid. Palm featuring a strong nitrile coating which gives high resistance to wear, good oil resistance and a good grip.

GUIDE 324

CUT PROTECTION CLASS 5. Complies with EN388 - 4543

GUIDE 334

GUIDE 295

Guide 334, knitted in a yarn of polyethylene, glass and polyester. Palm coated with PU, providing wear resistance and grip. Silicone-free.

CUT PROTECTION CLASS 5. Complies with EN388 - 4544.

Guide 295, seamless knitted glove made from Kevlar速 yarn. Palm coated with heavy latex which gives a good grip in both dry and wet environments.

CUT PROTECTION CLASS 5. Complies with EN388 - 2544

GUIDE 365 Guide 365, seamless knitted arm protectors. Length 53 cm. CUT PROTECTION CLASS 5. Complies with EN388 - 3541

GUIDE HEXARMOR 3041

Guide HexArmor 3041, the seamed glove made from patented HexArmor速 material. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4502

GUIDE 364 Guide 364, seamless knitted arm protector made from yarn containing steel and aramid. Length 53 cm. CUT PROTECTION CLASS 5. Complies with EN388 - 2543

GUIDE HEXARMOR 7080

Guide HexArmor 7080, a glove made from patented HexArmor速 material. Nitriledipped palm provides protection against moisture and wear. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4542

Gloves for better cut protection working with

Foodstuffs BUTCHERING

WILCO SHORT + PROFOOD 72-286

PACKING

Large parts of the food industry today are not aware of the solutions available to safely handle knives and other cutting tools. For really tough tasks a glove made from mail gives the best cut protection. In many cases it is quite adequate to use a foodstuffs-approved cut protection glove. It is appropriate, then, to combine cut protection with cold insulation in order to work both safely and comfortably.

BUTCHERING OF CHILLED PRODUCTS

CHOPPING

COLDSTORE

The chain mail glove is used on the hand holding the food, with a proFood glove on the other hand. This combination provides a complete cut protection CUT PROTECTION CLASS 5.

WILCO SHORT + GUIDE 321

The chain mail glove is used on the hand holding the food, with a Guide glove on the other hand. This combination provides a complete cut protection CUT PROTECTION CLASS 5.

PROFOOD 72-286 proFood 72-286, knitted in a blue protective Dyneema yarn CUT PROTECTION CLASS 5. Complies with EN 388 - 354X.

PROFOOD 70-866

Knitted, seamless construction made from Dyneema yarn. The design also gives a very good insulation against the cold down to 0 째C CUT PROTECTION CLASS 5. Complies with EN 388 - 354X.

WILCO SHORT Chain mail glove, which gives users a very high protection against cutting blades.

Chain mail glove, which gives users a very high protection against cutting blades.

CUT PROTECTION CLASS 5. Complies with EN 1082-1 and EN 14328

CUT PROTECTION CLASS 5. Complies with EN 1082-1 and EN 14,328

WILCO SHORT + PROFOOD 70-866

The chain mail glove is used on the hand holding the food, with a proFood glove on the other hand. This combination provides a complete cut protection and cold insulation CUT PROTECTION CLASS 5.

GUIDE 321

PROFOOD 78-110

Knitted, seamless construction made from Dyneema yarn.

CUT PROTECTION CLASS 5. Complies with EN 388 - 2541

Seamless knitted glove. The design makes for excellent insulation against cold and heat. Complies with EN 388 314X, EN 511 - 100, EN 407 - X1XXXX

Gloves for better cut protection in A group of users who may not automatically be associated with the need for cut protection. There are, however, a number of completely unnecessary injuries that are easy to protect against. It can be cutting oneself on a cardboard box when packing or unpacking goods, metal or plastic tie-bands that can be sharp and nasty. In addition, knives are frequently used for the opening of boxes and packing materials.

Storage / Logistics: METAL TIE-BANDS

GUIDE 300 GREY

GUIDE 334

CORRUGATED PAPER

KNIVES

PLASTIC TIE-BANDS

UNLOADING

LOADING

Guide 300, knitted from a polyethylene / polyester yarn. Palm coated with black PU, providing wear resistance and grip. Silicone-free.

CUT PROTECTION CLASS 3. Complies with EN388 - 4342.

Guide 334, knitted in a yarn of polyethylene, glass and polyester. Palm coated with PU, providing wear resistance and grip. Silicone-free.

Guide 334, knitted in a yarn of polyethylene, glass and polyester. Palm coated with PU which provides durability and grip. Silicone-free.

CUT PROTECTION CLASS 5. Complies with EN388 - 4544.

GUIDE 303

Guide 303, knitted from a polyethylene / polyester yarn with elastan for increased fingertip sensitivity. Palm coated with grey PU, providing wear resistance and grip. CUT PROTECTION CLASS 5. Complies with EN388 - 4543.

GUIDE 322

Guide 322, seamless knitted glove made from yarn containing steel and aramid. Can also be used as an inner glove. CUT PROTECTION CLASS 5. Complies with EN388 - 1541

Gloves for better cut protection in

Wood: AT THE TIMBERYARD

In the wood industry we meet very different working methods, which place different demands on the gloves that are required in order to work safely. In the production of plywood, for example, there is a high risk of getting splinters in your hands, especially in the thumb grip. As materials are also usually coated with adhesives or chemicals, puncture injuries can often lead to infections or allergies.

PLYWOOD & CHEMICALS

PLANING SHARP EDGES & SHARP CORNERS

PLYWOOD

IN CONSTRUCTION

INSTALLATION

Guide HexArmor 4041, the seamed glove made from patented HexArmor速 material. Back of hand in spandex for increased flexibility. Maximum protection against puncture injury with maximum cut protection. CUT PROTECTION CLASS 5. Complies with EN388 - 4501

GUIDE HEXARMOR 4041

GUIDE 4010 + HEXARMOR FINGER PROTECTION

A nitrile glove that provides an excellent protection against chemicals. Inside is a thumb grip which protects against splinters and chips. CUT PROTECTION CLASS 5.

GUIDE 300 GREY

GUIDE 358

Guide 300, knitted from a polyethylene / polyester yarn. Palm coated with black PU, providing wear resistance and grip. Silicone-free.

CUT PROTECTION CLASS 3. Complies with EN388 - 4342.

Guide 358, seamless knitted glove made from a Kevlar and acrylic yarn. Palm coated with a superfinished latex surface. Which gives a very good grip in both wet and dry conditions.

Guide 358, seamless knitted glove made from a Kevlar and acrylic yarn. Palm coated with a super-finished latex surface. Which gives a very good grip in both wet and dry conditions.

CUT PROTECTION CLASS 3. Complies with EN 388 - 2342

Turn static files into dynamic content formats.

Create a flipbook