2 B3
7120 778
2800
727
1620
Tree 1: Trunk diameter = 30mm Canopy diameter = 1000mm Reinforced Concrete Steps
B1-01 - PLAN Layout size: 300mm Scale 1:50 Pan view to centre A
1 B3
1788
2
3
4
5640
1920
D
960
1
DECK AREA CALCULATIONS:
360
732
0
In the viewports, th the section plane i will appear thicker alarmed if the lines
Site Boundary 250
1030
980 620
3360mm x7120mm =23.923 m^2 (C)
120
1560
2 B1
7120
DECK PLAN
Concrete Stump
Total Area: 2.151 +2.916 +23.923 +0.528 =29.518 m^2
Do not1 use a scree B1-02 - ELEVATION create xyour PDF as Layout size: 200mm 80mm Scale 1:50 too thick, and the Pan view to centre elevation in Reinforced Concrete Steps 250mm x 155mm(H) x 1788mm Every steps are 155 height
465
155
Ground line
618
4 3 2 1
395
618
N
480mm x1100mm =0.528 m^2 (D)
2398
1780
Scale: 1:50
Ground line
1620mm x1800mm =2.916 m^2 (B)
1560 3560
Decking Board Edge (35mm x 120mm) with 6mm gap between
1195mm x1800mm =2.151 m^2 (A)
600
1 B1
The gaps between each decking board horizontally are 6mm and both sides of them are nailed on the joists
B
C
5160
840
Tree 2: Trunk diameter = 60mm Canopy diameter = 2000mm
1500
1195
300
750
1800
277
0 Concrete Stump
ELEVATION 1
ELEVATION 2
Scale: 1:50
Construction as Alchemy ARCH10002
Scale: 1:50
2019 Semester 1
Studio Leader: Yi Lobachevsky Studio: Studio 03 - Friday Morning
Name: Ziyang Yuan (Vincent) Student Number: 1025198
Part 1B : Relaxation Deck
B1
423
CL 400
CL 400
CL 400
CL 400
CL 400
CL CL CL 400
303
303
CL CL CL 400
297
297
CL 375
CL 375
CL
CL
375
MEMBER SCHEDULE DECKING
375
1798 1
2
3
4
CL
1317
0
662
CL
CL
3292
1 B1
CL Six engaged piers (all 350mm x230mm)are set on the brick wall strip footing which used to support the bearers above them. The strip footing for brick wall is extended 70mm and positioned in the middle of the engaged piers.
Bearer 1 (175mm x75mm)
Bearer 1 (175mm x75mm)
All other bearers are Bearer 2 (2/175mm x50mm)
Joist length
Joist length Joist length 723 Bearer cantilever and stump spacing
694
1882
CL
1065 4557
CL
2145 7051
Bearer cantilever Bearers length
STUMPS
Bearers length
cross section: 100 x 100
Bearers length
F14 unseasoned pine
500
F14 unseasoned pine
Bearer 1: 1900
PAD FOOTINGS
N
Bearer 2: 1875
Studio Leader: Yi Lobachevsky Studio: Studio 03 - Friday Morning
single span: 1300 maximum cantilever: 325 continuous span: 1800 maximum cantilever: 450
all joist spacing are 500mm
single span: 2300 2900 maximum cantilever: 575 725 continuous span: 2300 2900 maximum cantilever: 575 725
Floor Load Width [FLW]: 2400
N/A
Ref. Table: Australian Standands AS 2870-2011 Residential Slabs & Footing p.80
Concrete
3000
cross section: 400 x 400
reinforced concrete
Tributary area: 10m^2
depth: 200
Maximum tributary area: 2816mm x 1838mm =5.175m^2
Scale: 1:50
2019 Semester 1
gap between boards (mm): 6
Ref. Table: 2. Decking board sizes and stress grades 4. Allowable decking board spans
BEARER AND JOIST LAYOUT PLAN
Construction as Alchemy ARCH10002
450
height: 658
2 B1
2 B3
Bearer 1: 175 x 75
Bearer 2: 2/175 x 50
600
Bearer spacing
N/A
Ref. Table: 6. Deck joists unseasoned
Do not use a screen create your PDF as too thick, and the sc
CL
480 Bearer spacing
Reinforced concrete steps are supported by two reinforced concrete footings (both 400mm x 600mm x 750mm)
150 x 50
BEARERS
700
CL Site Boundary
F14 unseasoned hardwood
In the viewports, the the section plane is will appear thicker t alarmed if the lines
JOISTS 5604
1875
5091
4643
CL
1 B3
35 x 120
OTHER INFORMATION + REFERENCE TABLE
359
CL
CL
359
CL
MAX. ALLOWABLE SPAN (mm)
359
Joist spacing
CL
MAX. ALLOWABLE SPACING (mm)
CL CL
1550
[e.g. F7 unseasoned Cypress]
1126
Bearer length
MATERIAL (stress grade + timber type)
Bearer length
HEIGHT (mm) x WIDTH (mm)
B2-01 - BEARER AND Layout size: 280mm Scale 1:50 Pan view to centre
Name: Ziyang Yuan (Vincent) Student Number: 1025198
Part 1B : Relaxation Deck
Ref. Table: 7. Deck bearers unseasoned timber
Underside Depth: 600mm Ref. Table: Australian Standands AS 2870-2011 Residential Slabs & Footing p.80
B2
35
th In the section viewports, the In lines the section plane is cutting the s willpria will appear thicker than when alarm alarmed if the lines appear too b 150
The edge of the deck is made by three levels of decking boards. They are all nailed on the joists and bearers. Gaps between them are all 6mm.
175 258
Do R n Do not use a screen shot of the crea create your PDF as this will make too too thick, and the scale to be dist Ground line
200
Ground line
618
175 400
258
120
618
120
150
120
35
35
B3-0 B3-01 - SECTION A Layout size: 200mm x 250mmLayo Scal Scale 1:50 Pan Pan view to centre deck section
1317
CL
Stupm and footing are 600mm depth unferground
SECTION 1 SHOWING EDGE
2019 Semester 1
CL
SECTION 2 SHOWING EDGE
Scale: 1:20
Construction as Alchemy ARCH10002
Stump spacing
Scale: 1:20
Studio Leader: Yi Lobachevsky Studio: Studio 03 - Friday Morning
Name: Ziyang Yuan (Vincent) Student Number: 1025198
Part 1B : Relaxation Deck
B3
Gaps between decking boards and brick wall are all 6mm
Length of the decking boards are reduced due to the engaged pier. Detail see B1- Deck Plan 1:50
Decking board here is cut by the engaged pier (Detailed dimension see B1 - Deck Plan 1:50)
Decking boards are nailed onto the joists under them to avoid moving.
There is another joist below the existing joist connected with bearers on both sides which support the edges (see B5 Perspective 1 for details)
Concrete steps (250mm x 155mm x1788mm)
Reinforced concrete footing (400mm x 600mm x750mm)
Stumps (100mm x100mm x658mm)
Deck edges are the same size as decking boards (35mm x120mm) Edges are nailed on joists and bears and nailed to each other on the corner.
Pad footings (400mm x400mm x200mm)
3D HERO VIEW
Construction as Alchemy ARCH10002
2019 Semester 1
Studio Leader: Yi Lobachevsky Studio: Studio 03 - Friday Morning
Name: Ziyang Yuan (Vincent) Student Number: 1025198
Part 1B : Relaxation Deck
B4
Joist for hanging decking edge
B5-01 - PERSPECTIVE 1 Layout size: 200mm x 120mm Orbit and pan to centre view o This bearer is cut by the engeged pier and supported by bricks pier below
Three small bearers (175mm x75mm) are used here for supporting the joists and decking boards above
Concrete steps and reinforced concrete footings
Deck edges are nailed on the joists and bearers here Joist for hanging decking edge (nailed on both sides of bearers)
Joist for hanging decking edge
Joist for hanging decking edge
Pad footings are all 400mm x400mm x200mm All stumps are 100mm x100mm x658mm(H)
PERSPECTIVE 1
PERSPECTIVE 2 Bearer here is cut by the engaged pier (details see B2 - Bearer and joist plan)
Joist here is cut by the engaged pier and has a cantilever (details see B2 Bearer and joist plan)
Joist for hanging decking edge
B5-03 - PERSPECTIVE 3 Layout size: 200mm x 120mm Orbit and pan to centre view o Edges here are nailed along the joists
Three levels of deck edges are nailed on the joists and bearers
There are six brick piers for supporting the bearers above and they are set on the wall strip footing
Reinforced concrete footing for steps - 400mm x600mm x750mm(H)
Brick wall reinforced concrete strip footing
PERSPECTIVE 3 Construction as Alchemy ARCH10002
Engaged piers (350mm x 230mm) are used for supporting the bearers above Strip footing is extended 70mm
PERSPECTIVE 4 2019 Semester 1
Studio Leader: Yi Lobachevsky Studio: Studio 03 - Friday Morning
Name: Ziyang Yuan (Vincent) Student Number: 1025198
Part 1B : Relaxation Deck
B5