5 Wiper system

1. Switch on the ignition, refer to page 44. 2. Briefly press the button in the turn signal lever repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes. 4. Briefly press the button repeatedly until the symbol and "SET" are displayed.

5. Press and hold the button until the display changes. 6. Briefly press the button repeatedly until the display shows the illustrated symbol, arrow.

7. Press and hold the button until the display changes. Brief indication of a turn.

Triple turn signal. 9. Press and hold the button until the display changes. The setting is stored.

Wiper system

1 Switching on wipers 2 Switching off wipers or brief wipe 3 Activating/deactivating intermittent mode or rain sensor* 4 Cleaning windshield and headlamps*

Switching on wipers

Press the lever upward, arrow 1. The lever automatically returns to its initial position when released.

Normal wiper speed

Press once. The system switches to intermittent operation when the vehicle is stationary.

Fast wiper speed

Press twice or press beyond the resistance point. The system switches to normal speed when the vehicle is stationary.

Intermittent wipe or rain sensor*

If the car is not equipped with a rain sensor, the intermittent-wipe time is preset.

If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall. The rain sensor is mounted on the windshield, directly in front of the interior rearview mirror.

Activating intermittent wipe or rain sensor

Press button, arrow 3. This symbol is displayed in the tachometer.

Deactivate the rain sensor before entering an automatic car wash. Failure to do so could result in damage caused by undesired wiper activation.<

Adjusting the sensitivity of the rain sensor

1. Switch on the ignition, refer to page 44. 2. Briefly press the button in the turn signal lever repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes. 4. Briefly press the button repeatedly until the symbol and "SET" are displayed. 6. Press the button to select the desired sensitivity. 7. Wait, or press and hold the button until the display changes.

The settings are stored.

Deactivating intermittent wipe or rain sensor

Press the button again, arrow 3.

Brief wipe

Press the lever downward once, arrow 2.

Cleaning windshield and headlamps*

Pull the lever, arrow 4. Washer fluid is sprayed onto the windshield and the wipers are operated briefly. When the vehicle lighting system is switched on, the headlamps are cleaned at regular and appropriate intervals. In cars equipped with an alarm system, the headlamps cannot be cleaned when the hood is open.

Do not use the washers when the washer fluid reservoir is empty; otherwise, you will damage the washer pump. Only use the washers if the hood has been completely closed; otherwise, the headlamp washer system* may be damaged. Do not use the washers if there isany danger that the fluid will freeze on the windshield. If you do, your vision could be obscured. For this reason, use antifreeze.<