NEW FROM HSP

product to have a chemical reaction with the ash and the soot.

The Tunap 931 DPF Cleaner product is waterbased, non-corrosive, non-toxic and can block the DPF if applied hot – and also being water based, its likely to evaporate, meaning the process would be pointless when used on a hot DPF.

“On the scan tool, the differential pressure sensor was reading -0.4 kPa, informing us there is a problem with the sensor. It should be reading 0 kPa when the engine is not running,” Clinton said.

“The 931 DPF cleaner is used in conjunction with a Tunap supplied spray gun, entering the pressure side of the DPF via a probe before the actual filter.

“As soon as the foam starts to exit the filling point, it is left for 10 minutes allowing it to soak, and refilling until the 1L bottle is empty.

“We repeat the process followed by a rinse with 932 flushing concentrate.

“This is important because it cleans the fluid from the system, assisting the process. We refit the hoses, start the engine – bringing the speed to 950-1000 RPM – to push the liquid out.

“At this stage, the scan tool displayed a pressure

The team at HSP have been keeping themselves busy over the past few months

The company says the results of their efforts are already evident, with a large number of new releases being first to market.

Most notably is the new release electric roller cover to suit the Next Generation Ford Ranger and Ford Raptor, says HSP.

HSP says this product was launched before any other products of its kind were available in Australia in both the genuine and aftermarket space.

It states that this early release was indicative of their innovative drive and industry-leading rate for progress.

The team has attributed their speed to their philosophy of having their engineering, product development and manufacturing in Australia.

“Having the ability to take the item from concept to reality without the need of heavy external input has cut down development time and is one of the key reasons we continue to manufacture in Australia,” HSP Director of Research and Development, Masood Aimaq, said.

HSP reports that its team has now also finished all development for its full suite of products for the Next Generation Ford Ranger and Raptor, which includes their Electric Roll R Cover, Premium

Tonneau Lid, Silverback, Load Slide, Tail Lock and Tail Assist as well as HSP’s newly released Armour Bar Sports bar.

The HSP team also states that in addition to its Ford product releases, it has also just launched its new Roll R Cover variation for the newly released GWM Cannon Vanta, which has only recently landed in Australia.

Indeed, it looks like 2023 will be a big year for more products for HSP as it is planning on releasing two new products in the first half of the year and its Canopy towards the end of year –which HSP says will be another Australian made product.

“We have a full suite of new products coming into the country, all with the core philosophy of giving the customer a better connection to their vehicle,” HSP Director of Sales, Massih Aimaq, said.

“We are now moving into a new phase within our business and are so thankful to all our customers, suppliers and staff for helping us grow from a small shop of three people to over 75 internal staff, worldwide distribution and most importantly, three Victorian manufacturing plants.”

HSP says it is one of the leaders in the Australian of 12 kPa and our test gauge at 9.0. At this stage there’s no need to drive the vehicle as it’s best to introduce heat into the DPF gradually and slowly. “After 10 minutes idling, the gauge dropped to 0kPa whilst the scan tool displayed 2.5. As such, we were able to prove the sensor failure and reduce the pressure without performing a DPF regeneration.”

For more information, visit www.dieselhelp.com.au or www.tunap.com.au market in manufacturing hard lids, roll tops, tailgate central locking units, retractable bed slides and more.

The company says its mission is simple: to create and distribute beautifully engineered products that create an effortless collaboration between the vehicle and the user.

HSP explains that its business has been accredited with “the most recognised quality management system standard in the world,” ISO9001, which assists its business performance and provides a solid foundation to consistently deliver quality products.

The team at HSP says they are always looking for new distributors and partners so invites readers to please get in contact if they are looking to join the family.

For more information, call 1300 441 498, email info@hsputelids.com or visit www.hsputelids.com