Passleader 400-101 Braindumps

Cisco 400-101 CCIE Routing and Switching (v5.1)

Passleaders is the leading brand of 400-101 Braindumps.

We will provide you latest updated Test Engine and PDF Dumps. Passleaders provide you some free demo questions and answers. Practicing our 100% updated 400-101 Practice Tests is a guaranteed way towards your success in Cisco 400-101 Exam.

Passleader 400-101 Exam Questions

Passleader 400-101 Practice Test

Did You Know!

Passleader 400-101 Exam Questions

Passleader 400-101 Practice Test

You Don’t need to take any stress for the preparation of 400-101 Exam Questions because we will provide you real Exam questions answers, Passleaders provide you some demo question answer of 400-101 Braindumps.

Passleader 400-101 Exam Questions

Passleader 400-101 Practice Test

QUESTION 1, You boot a router that contains an RXBOOT image and no startup configuration file. After a few moments, streamlined Setup mode begins. Which of the following will you be prompted to configure? (Select the best answer.)

A. B. C. D.

the host name the VTY password the enable secret password interface parameters

Correct Answer: D

www.passleaders.com/400-101-exam.html

QUESTION 2, You issue the aaa authentication login default group tacacs+ local command. Which of the following statements is correct? (Select the best answer.)

A. B. C. D.

If a user's account is not found on the TACACS+ servers, the user will automatically be allowed access.

If the TACACS+ servers are unavailable; the user will automatically be allowed access.

If the TACACS+ servers are unavailable; the user will automatically be denied access.

The default authentication method is applied to all lines for which no other login method has been specified.

Correct Answer: D

www.passleaders.com/400-101-exam.html

QUESTION 3, Which of the following OSPF LSAs are also called ASBR summary LSAs? (Select the best answer.)

A. B. C. D.

Type 1 LSAs Type 2 LSAs Type 3 LSAs Type 4 LSAsE E. Type 5 LSAs

Correct Answer: D

www.passleaders.com/400-101-exam.html

QUESTION 4, Which of the following statements are true when an RSTP switch detects a topology change? (Select 2 choices.)

A. It starts the TC While timer with a value equal to the hello timer for all its non-edge designated ports and its root port.

B. It starts the TC While timer with a value equal to twice the hello timer for all its non-edge designated ports and its root port.

C. It starts the TC While timer with a value equal to three times the hello timer for all its non-edge designated ports and its root port.

D. It flushes the MAC addresses associated with its edge designated ports and its root port from the CAM table.

E. It flushes the MAC addresses associated with its non-edge designated ports and its root port from the CAM table.

Correct Answer: BE

www.passleaders.com/400-101-exam.html

QUESTION 5, Which of the following command sets will cause an EEM applet to finish before the show runningconfig command is executed? (Select the best answer.)

A. Router(config)#event manager applet boson Router(configapplet)#event cli pattern "show runningconfig" sync no skip no Router(configapplet)#action 1.0 syslog msg "Running configuration displayed" B. Router(config)#event manager applet boson Router(configapplet)#event cli pattern "show runningconfig" sync no skip yes Router(configapplet)#action 1.0 syslog msg "Running configuration displayed" C. Router(config)#event manager applet boson Router(configapplet)#event cli pattern "show runningconfig" sync yes Router(configapplet)#action 1.0 syslog msg "Running configuration displayed" Router(configapplet)#set 2.0 _exit_status 0 D. Router(config)#event manager applet boson Router(configapplet)#event cli pattern "show runningconfig" sync yes Router(configapplet)#action 1.0 syslog msg "Running configuration displayed" Router(configapplet)#set 2.0 _exit_status 1 Correct Answer: D

www.passleaders.com/400-101-exam.html

QUESTION 6, Which of the following commands will track whether IP routing is enabled, the interface line protocol is up, and the interface IP address is configured? (Select the best answer.)

A. B. C. D.

track 1 interface FastEthernet1/1 lineprotocol track 1 interface FastEthernet1/1 ip routing track 1 ip route 10.10.10.0/24 reachability track 1 ip route 10.10.10.0/24 metric threshold

Correct Answer: B

www.passleaders.com/400-101-exam.html

QUESTION 7, Which of the following NetFlow features is not unique to version 9 and later? (Select the best answer.)

A. template-based export protocol B. support for IPv6 flows C. support for MPLS flows D. support for multicast flows E. support for router-based aggregation Correct Answer: E www.passleaders.com/400-101-exam.html

QUESTION 8, Your company has configured STP with the timers set to their default values. For what duration will the TC bit be set by the root bridge after it receives a TCN BPDU? (Select the best answer.)

A. B. C. D.

two seconds 15 seconds 20 seconds 35 seconds

Correct Answer: D www.passleaders.com/400-101-exam.html

QUESTION 9, RouterA and RouterB are connected by their Serial 0/0 interfaces. You are able to successfully ping from one router to the other? however, the routers are not establishing an OSPF neighbor relationship. You issue the debug ip ospf hello command on each router and notice that RouterA is sending hello packets but not receiving them.

Which of the following statements best describes why the routers are unable to form a neighbor relationship?

(Select the best answer.)

A. B. C. D. E. F.

RouterA should be configured as the DR. RouterB should be configured as the DR. The Serial 0/0 interface of RouterA is configured as a passive interface.

The Serial 0/0 interface of RouterB is configured as a passive interface.

RouterA and RouterB are configured with different OSPF process IDs. RouterA and RouterB are configured with different hello timer or dead timer intervals.

Correct Answer: D

www.passleaders.com/400-101-exam.html

QUESTION 10, Which of the following routes cannot be redistributed into a dynamic routing protocol? (Select 2 choices.)

A. B. C. D. E.

C 192.168.1.0/30 is directly connected, Ethernet0/0 C 192.168.1.1/32 is directly connected, Loopback0 L 192.168.1.1/32 is directly connected, Ethernet0/0 C 2001:1234::/64 [0/0] E. L 2001:1234::1/128 [0/0] LC 2001:1234::1/128 [0/0]

Correct Answer: CE

www.passleaders.com/400-101-exam.html

Offering Effective PDF Tests Training to Individuals and Companies 100% Money Back Guarantee on All Dumps

WHY CHOOSE US!

Special Student Discount Available

Printable and Searchable PDF Braindumps User Interactive Exams Software

Passleader 400-101 Exam Questions

Passleader 400-101 Practice Test

Passleader 400-101 Exam Questions

Passleader 400-101 Practice Test

Good luck Passleaders provides you guaranteed success in 400-101 Dumps as we have latest 400-101 Exam Dumps. Click Here following link to download 400-101 Braindumps.

Passleader 400-101 Exam Questions

Passleader 400-101 Practice Test