ATLAS 210 LC

ROBUST. PRECISE. ECONOMICAL.

210LC

Crawler Excavator | 210LC, 210NLC

max. 22,2 t 104 kW (141 hp) 0,43 - 1,37 m3

Technical specifications E N G I N E (COM III) Power according to ISO 9249.104 kW (141HP) RPM ������������������������������������������������������2000/min Make/model ���������������������������� Cummins QSB 6.7 Design ��������������������������������������Turbocharger/LLK

Cylinder capacity ������������������������������������ 6700 cm3 Number of cylinders �������������������������������������������� 6 Automatic idle ����������������������������������������Standard Cooling system ��������������������������������� Water-cooled

Air filter ����������������������������������������������� Dry air filter Battery ����������������������������������������2 x 12 V / 100 Ah Alternator ��������������������������������������������24 V / 70 Ah Starter �����������������������������������������������24 V / 3,2 kW

H Y D R AULIC SYSTEM

TECHNICAL SPECIFICATIONS

• 2 load-limit-controlled high-performance piston pumps • Dual-circuit hydraulics system • 7 standard consumer loads in one control block • Sensitive, proportional, independent control • Primary and secondary protection against overload • Suction valves for all work functions • Load-retaining and fine-lowering valve in lifting circuit • Pump flow control

• Grab function is standard (without rotating) • Fuel-efficient flow-on-demand control • Pipe break protection valves for lifting cylinders • Up to 2 additional control circuits possible • Max. oil flow..................................400 l/min • Max. operating pressure.......340 (370)* bar • Operating models: 3 pre-programmed Models (Fine, Eco, Power)

S W I N G ASSEMBLY • Swing motor: • Swing gear: • Swing brake:

Axial piston motor with priority valve Multistage planetary transmission Automatic multidisc parking brake (can also be operated manually)

• Max. swing speed..........................14,5/min • Swing torque......................63,16 (68,73)* kNm

T R A C T I ON DRIVE AND BRAKES • Steering: • Traction drive: • Brakes:

2 control levers / pedals enable separate drive of both chains 2 automatic drive positions Hydraulic, service-free multidisc brakes

• Maximum speed......................... 3,3 / 5,1 km/h • Tractive force................................... 200* kN • Max. climbing power............................70 %

U N D E R CARRIAGE Construction: • X-frame

Drives: • Drive quality D4

• Lifetime lubrication of track and carrier rollers • 4 lashing grommets

• Three-section base plates • Chains lubricated • Sealed bolts

• Chain tension via hydraulic oil cylinder and pre-tensioned steel spring • Track LC.............................................2,20 m • Track NLC..........................................2,00 m

F I L L C A PACITIES • Fuel tank.........................................389 liter • Cooling system..................................42 liter

• Engine oil...........................................20 liter • Hydraulic tank.................................216 liter

• Hydraulic system.............................290 liter

CONTROL: • Ergonomically designed joysticks • Clear and concise arrangement of the switches in the control panel

CLIMATE CONTROL: • Air conditioneing eduipped as standard • Very good air distribution through optimally arranged nozzles

MONITORING:

SOUND LEVELS:

• Operating data screen display • Automatic system for monitoring, warning and storage of data

• ISO 6396 (LpA) in driver's cab........ 72 dB(A)

D R I V E R ´ S CAB • Meets latest safety standards • Extra-wide entrance • Spacious leg room • Excellent circumferential visibility • Preparation for radio installation with mute function DRIVER’S SEAT: • Air-cushioned comfort seat (optional seat hea­ting) • Arm rests and lumbar support • Seat adjustable separately from console

• 2000/14 EG (LwA) ambience level.......102 dB(A)

* Values when pressure is switched on

210LC Working equipment OPERATING WEIGHTS

Crawler Excavator 210LC

Crawler Excavator 210NLC

Monoblock 5,68 m (C21.3M) Stick 2,70 m (D21.2)

Monoblock 5,68 m (C21.3M) Stick 2,70 m (D21.2)

21,3 t 21,6 t 21,8 t

21,0 t 21,2 t 21,5 t 21,7 t

Monoblock Ground plate width Ground plate width Ground plate width Ground plate width

500 mm 600 mm 700 mm 800 mm

OPERATING WEIGHTS Adjustable base arm 1.95 m (C21.41)

Crawler Excavator 210LC 1,95 m (C21.41) | 3,41 m (C21.46) 1,95 m (C21.41) | 3,41 m (C21.46)

Adjustable boom 3.41 m (C21.46) Ground plate width Ground plate width Ground plate width Ground plate width

Crawler Excavator 210NLC 1,95 m (C21.41) | 3,41 m (C21.46) 1,95 m (C21.41) | 3,41 m (C21.46)

Stick 2,15 m D21.23)

Stick 2,65 m (D21.33)

Stick 2,15 m (D21.23)

Stick 2,65 m (D21.33)

21,5 t 21,9 t 22,1 t

21,5 t 21,9 t 22,1 t

21,3 t 21,5 t 21,8 t 22,0 t

21,3 t 21,5 t 21,8 t 22,0 t

500 mm 600 mm 700 mm 800 mm

Operating weight with driver, completely filled implement and 1,0 t for attachments

Engine: • COM III emission level • Engine speed adjustment via potentiometer • Automatic idle

• Cylinder end-position damping • Accumulator for emergency lowering of the arm system

Superstructure: • Spacious and lockable storage space in superstructure

Cab:

• Diesel pre-filter

• Air conditioner

Equipment: • Combined lubricating points for swing bea­ring and arm equipment

• 6 cylinders

• Engine monitoring Hydraulics: • Load-limit-controlled double displacement pump • Hydraulic attachment kit for grabbing (without rotation) • Hammer hydraulics (max. 200 Liter) • Quadrant hydraulics (max. 200 Liter) • Pipe-break protection valves for lifting cylinders • Pressure control level

• Preparation for radio installation with mute function • Air-cushioned comfort seat • Seat adjustable separately from console

Undercarriage:

• Ready for electric cooling box

• X frame

• Different options for storage, compartment for documents • Bottle holder • Heat-insulating glass, tinted windows • Operating data screen display • Rear view security camera with 5 inch LCD-colour monitor

• Integrated, hydraulic traction drive with brake valve • Automatic, hydraulic, service-free multi-disc brakes • Chain tensioning can be adjusted via oil cylinder • Lubricated, sealed chains • 4 lashing grommets on the undercarriage

S P E C I A L E Q U I P MENT Monoblock:

Engine:

• Monoblock with stick cylinder 5,68 m (C21.3M)

• Refueling pump

• Monoblock with stick cylinder 6,50 m (C21.5M)

• Auxiliary heating

Stick for Monoblock: • Stick 2,70 m (D21.2) • Stick 3,20 m (D21.3)

• Cold start assistance

Adjustable booms: • Base arm 1,95 m (C21.41) • A djustable boom adjusting cylinder 3,41 m (C21.46) • Adjustable boom adjusting cylinder 3,83 m (C21.461) Sticks for adjustable booms: • Stick 2,15 m (D21.23) • Stick 2,65 m (D21.33)

Equipment: • Automatically controlled and monitored electric central lubrication system • GPS/GSM telemetric system for monitoring of operating data, consumption, position • Xenon working lights

Hydraulics: • Shear / sorting grab function with comfort pressure controller • Grab and grab rotating function • Up to two additional circuits • Floating function for the boom • Hydraulic quick coupler • Pipe-break protection valve for bending cylinder • Pipe-break protection valves for lifting cylinders • Bio oil

Cab: • Cab protection guard • Flood lights • Beacon light • Radio CD/MP3, front AUX in, USB • Heated driver’s seat • Electric cooling box Other special equipment: See price list

AT TA C H M E N T S (SELECTION) Content SAE Cutting width Weight

Bucket 0,43 m3 600 mm 470 kg

Bucket 0,63 m3 800 mm 640 kg

Bucket 0,94 m3 1100 mm 820 kg

Bucket 1,16 m3 1300 mm 880 kg

Bucket 1,37 m3 1500 mm 915 kg

stability acc. to ISO 10567, bulk weight 1.8 t/m3

WORKING EQUIPMENT

S TA N DA R D E Q U IPMENT

Working ranges Monoblock 5,68 m (C21.3M) 11 10 9 8 7 6 5 4

B

3

A

2 1 0 -1 -2

C

-3

WORKING RANGES

-4 -5 -6 -7

0

1

2

3

4

5

6

7

8

9

10

11

12

D STICK LENGTHS A B C D

Max. cut-in height Max. pouring height Max. trench depth Max. reach Max. bucket digging force Max. stick digging force

2,70 m (D21.2)

3,20 m (D21.3)

9,40 m 6,69 m 6,34 m 9,83 m 132* kN 92* kN

9,64 m 6,93 m 6,84 m 10,32 m 132* kN 82* kN

Unit is equipped with monoblock attachment 5.68 m (C21.3M). * When pressure is switched on

210LC Lifting capacities Monoblock 5,68 m (C21.3M) 210LC

Lifting capacity at 370 bar 3,0 m

HEIGHT

FRONT

4,5 m

LATERAL

FRONT

6,0 m

LATERAL

FRONT

7,5 m

LATERAL

9,0 m

FRONT

LATERAL

3048

FRONT

LATERAL

Monoblock 5.68 m (C21.3M) with stick 2.70 m (D21.2) Max. reach 9.83 m + 9,0 m + 7,5 m + 6,0 m + 4,5 m + 3,0 m + 1,5 m +0m - 1,5 m - 3,0 m - 4,5 m

4440*

6436*

4498

8328*

6656

7022*

4326

5425

10481*

6028

7471

4058

5297

2935

11197

5473

7154

3790

5149

2804

10848

5201

6934

3603

5035

2703

9319*

10829

5186

6867

3546

5025

2694

15420*

9852

10984

5307

6957

3622

11312*

10274

8484*

5575

9319*

Monoblock 5.68 m (C21.3M) with stick 3.20 m (D21.3) Max. reach 10.32 m + 9,0 m + 7,5 m + 6,0 m + 4,5 m + 3,0 m + 1,5 m +0m - 1,5 m - 3,0 m - 4,5 m

+ 9,0 m + 7,5 m + 6,0 m + 4,5 m + 3,0 m + 1,5 m +0m - 1,5 m - 3,0 m - 4,5 m

+ 9,0 m + 7,5 m + 6,0 m + 4,5 m + 3,0 m + 1,5 m +0m - 1,5 m - 3,0 m - 4,5 m

5480

3084

9585*

6162

7452*

4097

5321

2944

11270

5508

7168

3785

5141

2785

10779

5125

6891

3551

4994

2655

10641

5017

6758

3438

4932

2601

9448

10750

5102

6806

3479

13135*

9855

9554*

5331

6837*

3671

Lifting capacity at 370 bar 3,0 m

HEIGHT

3147

4397

13818*

210NLC

3991* 6483*

FRONT

4,5 m

LATERAL

FRONT

6,0 m

LATERAL

FRONT

7,5 m

LATERAL

9,0 m

FRONT

LATERAL

2828

FRONT

Monoblock 5.68 m (C21.3M) with stick 2.70 m (D21.2) Max. reach 9.83 m 4440*

4166

6436*

4192

8328*

6172

7022*

4022

5401

10481*

5557

7438

3758

5273

2717

11145

5014

7122

3494

5125

2588

10797

4748

6901

3310

5011

2488

9319*

8661

10778

4734

6834

3254

5001

2479

15420*

8885

10932

4852

6924

3329

11312*

9291

8484*

5114

Monoblock 5.68 m (C21.3M) with stick 3.20 m (D21.3) Max. reach 10.32 m 3991*

2925

6483*

4090

5455

2863

9585*

5686

7452*

3795

5297

2725

11218

5046

7135

3488

5117

2568

10727

4671

6858

3257

4970

2440

10590

4566

6725

3146

4908

2386

13818*

8492

10699

4649

6773

3186

13135*

8884

9554*

4873

6837*

3376

The specified max. loading capacities in kilogram include a stability of 33% or are calculated at 87% of the hydraulic lifting power, as per ISO10567.

These values are applicable at the tip of the arm with optimum positioning of the corresponding arm system and with the pressure switched on. * Value limited due to hydraulics.

LATERAL

LIFTING CAPACITIES

4440*

Working ranges adjustable Boom 1,95 m (C 21.41) and 3,41 m (C21.46) 11 10 9 8 7 6 5 4 3

B

A

2 1 0 -1 -2 -3

WORKING RANGES

-4 -5 -6 -7

0

1

2

3

4

5

6

7

8

9

10

11

12

D STICK LENGTHS A B C D

Max. cut-in height Max. pouring height Max. trench depth Max. reach Max. bucket digging force Max. stick digging force

2,15 m (D21.23)

2,65 m (D21.33)

9,75 m 7,05 m 5,43 m 8,90 m 133 (145)* kN 103 (113)* kN

10,16 m 7,46 m 5,93 m 9,29 m 133 (145)* kN 90 (98)* kN

Unit is fitted with adjustable main boom 1.95 m (C21.41) and adjustable boom 3.41 m (C21.46). * When pressure is switched on

C

210LC Lifting capacities adjustable Boom 1,95 m (C21.41) and 3,41 m (C21.46) 210LC

Lifting capacity at 360 bar 3,0 m

HEIGHT

FRONT

FRONT

7751*

7915* 9933* 9893* 11688* 11688 11804* 11702 11509 11343

6331* 6137* 6552* 7397* 8491* 9521* 10172* 10352* 10423* 10615* 10150*

+ 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

6331* 6137* 6552* 6760 6666* 6614 6608 6672 6488 6241 6106

8742* 9999* 12102* 13355* 14981* 16485* 16883* 17237* 16164*

8742* 9999* 11682* 11642 11705* 11825 11558 11450 11259

4621* 5487* 5443* 5885* 6734* 7861* 9004* 9859* 10269* 10339* 10450* 10688* 8783*

FRONT

LATERAL

FRONT

LATERAL

4827* 5948* 6200* 6605* 7032* 7361* 7423* 7497 7264*

4457 4555 4590 4576 4519 4418 4292 4163 4085

4582* 4380*

3074 3039

4621* 5487* 5443* 5885* 6734* 6690 6614 6581* 6610 6557 6392 6142 6092

5414* 5478* 5797* 6256* 6750* 7169* 7376* 7427 7448 6656

4627 4645* 4616 4580 4564 4551* 4411 4256 4123 4074

4329* 5498 5477 5420 5356 4373*

3195 3195 3165 3115 3052 3013

Lifting capacity at 360 bar 3,0 m

+ 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

LATERAL

Adjustable boom 1.95 m (C21.41) and 3.41 m (C21.46) with stick 2.65 m (D21.33) Max. reach 9.29 m

210NLC

HEIGHT

FRONT

9,0 m

7751*

7915* 9933* 9893* 12018* 13723* 15692* 16870* 17073* 17427*

+ 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

LATERAL

7,5 m

Adjustable boom 1.95 m (C21.41) and 3.41 m (C21.46) with stick 2.15 m (D21.23) Max. reach 8.90 m

+ 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

LATERAL

6,0 m

FRONT

4,5 m

LATERAL

FRONT

6,0 m

LATERAL

FRONT

7,5 m

LATERAL

FRONT

9,0 m

LATERAL

FRONT

Adjustable boom 1.95 m (C21.41) and 3.41 m (C21.46) with stick 2.15 m (D21.23) Max. reach 8.90 m 7751*

7751*

7915* 9933* 9893* 12018* 13723* 15692* 16870* 17073* 17427*

7915* 9933* 9893* 10793* 10814* 10913 10681 10494 10335

6331* 6137* 6552* 7397* 8491* 9521* 10172* 10352* 10423* 10615* 10150*

6331* 6137* 6433 6336 6250 6198 6196 6196 6016 5774 5642

4827* 5948* 6200* 6605* 7032* 7361* 7403* 7464 7264*

4157 4254 4290 4278 4221 4122 3995 3867 3791

4582* 4380*

2860 2824

Adjustable boom 1.95 m (C21.41) and 3.41 m (C21.46) with stick 2.65 m (D21.33) Max. reach 9.29 m

8742* 9999* 12102* 13355* 14981* 16485* 16883* 17237* 16164*

8742* 9999* 10809 10766 10824 10798 10541 10437 10253

4621* 5487* 5443* 5885* 6734* 7861* 9004* 9859* 10269* 10339* 10450* 10688* 8783*

4621* 5487* 5443* 5885* 6379 6271 6192 6167 6195 6083 5921 5677 5627

5414* 5478* 5797* 6256* 6750* 7169* 7354 7412 7415 6656*

4326 4367 4339 4311* 4299 4255 4114 3963 3828 3780

4329* 5478 5453 5399 5332 4373*

2979 2980 2951 2899 2837 2799

The specified max. loading capacities in kilogrammes include a stability of 33% or are calculated at 87% of the hydraulic lifting power, as per ISO10567.

These values are applicable at the tip of the arm with optimum positioning of the corresponding arm system and when the pressure is switched on. *Value limited due to hydraulics.

LATERAL

LIFTING CAPACITIES

4,5 m

Working ranges adjustable Boom 1,95 m (C21.41) and 3,83 m (C21.461) 11 10 9 8 7 6 5 4 3

B

A

2 1 0 -1 -2 -3

C

-5 -6 -7

0

1

2

3

4

5

6

7

8

9

10

11

12

D STICK LENGTHS A B C D

Max. cut-in height Max. pouring height Max. trench depth Max. reach Max. bucket digging force Max. stick digging force

2,15 m (D21.23)

2,65 m (D21.33)

10,22 m 7,54 m 5,85 m 9,36 m 133 (145)* kN 103 (113)* kN

10,65 m 7,97 m 6,35 m 9,84 m 133 (145)* kN 90 (98)* kN

Unit is fitted with adjustable main boom 1.95 m (C21.41) and adjustable boom 3.83 m (C21.461). * When pressure is switched on

WORKING RANGES

-4

Lifting capacities adjustable Boom 1,95 m (C21.41) and 3,83 m (C21.461) 210LC

Lifting capacity at 360 bar 3,0 m

HEIGHT

FRONT

8593* 7654* 7655* 9893* 12071* 14362* 16350* 16871* 17307* 15826*

FRONT

LATERAL

FRONT

7,5 m

LATERAL

FRONT

9,0 m

LATERAL

FRONT

LATERAL

8593* 7654* 7655* 9893* 11193 11316 11191 11046 11044 10917

5819* 5875* 5991* 6578* 7535* 8672* 9635* 10123* 10202* 10273* 10408* 10646* 8417*

5819* 5875* 5991* 6578* 6484 6379 6320 6316 6371 6243 6137 5919 5884

5584* 5707* 6054* 6500* 6932* 7185* 7200 7297 7262 6440*

4410 4447 4418 4391 4368* 4357 4216 4068 3943 3912

5344 5345 5313 5260 5198 5167

3024 3028 3001 2953 2898 2868

Adjustable boom 1.95 m (C21.41) and 3.83 m (C21.461) with stick 2.65 m (D21.33) Max. reach 9.84m + 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

LIFTING CAPACITIES

LATERAL

6,0 m

Adjustable boom 1.95 m (C21.41) and 3.83 m (C21.461) with stick 2.15 m (D21.23) Max. reach 9.36 m

+ 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

4,5 m

8206* 7991* 10094* 11696* 13567* 15563* 16682* 16949* 17255*

210NLC

8206* 7991* 10094* 11126 11202 11286 11075 10991 10940

5561* 5204* 5375* 5960* 6904* 8063* 9151* 9871* 10136* 10186* 10288* 10540* 10043*

HEIGHT + 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

5230* 5110* 5308* 5694* 6182* 6675* 7073* 7154 7204 7331 7226

4447 4505 4480 4432 4386 4358 4364 4348 4188 4022 3920

5000* 5113* 5290* 5313 5323 5267 5194 5159

3111 3141 3136 3102 3043 2971 2898 2866

Lifting capacity at 360 bar 3,0 m

5561* 5204* 5375* 5960* 6535 6403 6310 6283 6311* 6295 6161 6013 5871

FRONT

4,5 m

LATERAL

FRONT

6,0 m

LATERAL

FRONT

7,5 m

LATERAL

FRONT

9,0 m

LATERAL

FRONT

Adjustable boom 1.95 m (C21.41) and 3.83 m (C21.461) with stick 2.15 m (D21.23) Max. reach 9.36 m

8593* 7654* 7655* 9893* 12071* 14362* 16350* 16871* 17307* 15826*

8593* 7654* 7655* 9893* 10337 10429 10188 10048 10046 9924

5819* 5875* 5991* 6578* 7535* 8672* 9635* 10123* 10202* 10273* 10408* 10646* 8417*

5819* 5875* 5991* 6179 6070 5966 5906 5907 5937 5776 5672 5458 5425

5584* 5707* 6054* 6500* 6932* 7160 7181 7281* 7229 6440*

4110 4173 4148 4124* 4129* 4058 3920 3774 3650 3619

5320 5321 5289 5235 5174 5143

2810 2814 2787 2740 2684 2655

Adjustable boom 1.95 m (C21.41) and 3.83 m (C21.461) with stick 2.65 m (D21.33) Max. reach 9.84 m + 8,0 m + 7,0 m + 6,0 m + 5,0 m + 4,0 m + 3,0 m + 2,0 m + 1,0 m +0m - 1,0 m - 2,0 m - 3,0 m - 4,0 m

8206* 7991* 10094* 11696* 13567* 15563* 16682* 16949* 17255*

8206* 7991* 10094* 10277 10323 10278 10075 9994 9945

5561* 5204* 5375* 5960* 6904* 8063* 9151* 9871* 10136* 10186* 10288* 10540* 10043*

5561* 5204* 5375* 5960* 6112 5993 5901* 5871* 5900 5826 5694 5550 5411

5230* 5110* 5308* 5694* 6182* 6675* 7073* 7135* 7184* 7298 7193

4147 4225 4204 4161* 4120 4096 4104 4049 3891 3728 3627

5000* 5113* 5290* 5294 5305* 5243 5169 5135

2896 2925 2921 2886 2828 2756 2685 2653

The specified max. loading capacities in kilogram include a stability of 33% or are calculated at 87% of the hydraulic lifting power, as per ISO10567.

These values are applicable at the tip of the arm with optimum positioning of the corresponding arm system and with the pressure switched on. * Value limited due to hydraulics.

LATERAL

210LC

Dimensions Monoblock 5,68 m (C21.3M)

I

B D

A

H

G E F

C

Adjustable boom 1.95 m (C21.41) and 3.83 m (C21.461)

A

B

A

TRANSPORT HEIGHT Monoblock 5,68 m (C21.3M) with stick 2,70 m (D21.2)...................... 3,01 m Monoblock 5,68 m (C21.3M) with stick 3,20 m (D21.3)...................... 3,20 m

B

Adjustable boom, 1.95 m (C21.41) and 3.41m (C21.46) with stick 2,15 m (D21.23).................................................................... 3,15 m with stick 2,65 m (D21.33).................................................................... 3,15 m Adjustable boom, 1.95 m (C21.41) and 3.83m C21.461) with stick 2,15 m (D21.23).................................................................... 3,15 m with stick 2,65 m (D21.33).................................................................... 3,15 m

DIMENSIONS

C

TRANSPORT WIDTHS Ground plate width 500mm Ground plate width 600mm Ground plate width 700mm Ground plate width 800mm

TRACK LC 2,20 m 2,70 m 2,80 m 2,90 m 3,00 m

TRACK NLC 2,00 m 2,50 m 2,60 m 2,70 m 2,80 m

TRANSPORT LENGTHS Monoblock 5,68 m (C21.3M) with stick 2,70 m (D21.2)................... 9,57 m Monoblock 5,68 m (C21.3M) with stick 3,20 m (D21.3)................... 9,57 m Adjustable boom, 1.95 m (C21.41) and 3.41m (C21.46) with stick 2,15 m (D21.23)................................................................. 8,91 m with stick 2,65 m (D21.33)................................................................. 8,93 m Adjustable boom, 1.95 m (C21.41) and 3.83m (C21.461) with stick 2,15 m (D21.23)................................................................. 9,34 m with stick 2,65 m (D21.33)................................................................. 9,34 m

D E F G H I

REAR PIVOTING RADIUS..................................................................... 2,60 m SUPPORTING CHAIN LENGTH.............................................................. 3,70 m DRIVE LENGTH.................................................................................... 4,49 m GROUND CLEARANCE.......................................................................... 0,44 m HEIGHT ABOVE CAB............................................................................ 2,95 m SUPERSTRUCTURE TRANSPORT WIDTH............................................. 2,50 m

We reserve the right to make structural changes, data is informational only, units comply with the new European safety guidelines.

www.atlasgmbh.com ATLAS Maschinen GmbH EXCAVATORS Atlasstrasse 6 27777 Ganderkesee, Germany T: +49 (0) 4222 954 0 F: +49 (0) 4222 954 343 info@atlasgmbh.com 210LC-EN (1) Effective date: August 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied.

Products and services listed may be trademarks, service marks or trade-names of Atlas Maschinen GmbH and/or its subsidiaries. All rights are reserved. Atlas® is a registered trademark of Atlas Maschinen GmbH. Copyright © 2010 Atlas Maschinen GmbH.

Ref. no. 6141729