Catalogo ATLAS 220W

STABLE. STRONG. STEADY.

220W

Wheel Excavator 220W

22,0 - 22,6 t 125 kW (170 hp) 0,75 - 1,3 m3

ENGINE Power rating acc. to ISO 9249 .125 kW (170 hp) RPM ................................................ 2000/min Make/model ..................... Cummins/QSB 6.7 Desig.................Turbocharger/charge air cooling

Displacement ................................ 6700 cm3 Number of cylinders .................................... 6 Cooling system ......................... water cooled Air filter ............................................ dry air filter

Battery . ............................. 2 x 12 V / 100 Ah Generator . ................................. 24 V / 70 Ah Starter ..................................... 24 V / 3,2 kW

H Y D R AULIC SYSTEM • Load limit controlled high-performance piston pump • Dual circuit hydraulic system • Standard 7 consumer loads in one valve block • Sensitive, proportional, independent control • Primary and secondary protection against overload

• Suction valve for all work functions • Load retaining and fine lowering valves in lifting circuit • Pump flow control • Proportional grab/grab rotating function • Fuel efficient flow-on-demand control

• Pipe break protection valves for lifting cylinders • 2 additional circuits for more consumer loads possible • Max. oil flow . ...............................400 l/min • Operating pressure max . ... 340 (370)* bar • Operating modes: 3 preprogrammed modes (Fine, Eco, Power)

S W I N G ASSEMBLY • Swing motor: • Swing gear: • Swing brake:

Axial piston motor with priority valve Planetary transmission Automatically controlled multi-disc brake

• Max. swing speed .......................... 11/min • Swing torque .................................... 63,2 kNm

T raction DRIVE AND BRAKES • Variable displacement motor • Power shift gear • Double-acting brake valve • Travel direction pre-selection via switch in joystick

• Automotive drive and cruise control • Max. speed.......................................... 20 km/h • Off-road speed...................................... 5 km/h • Crawling speed.....................................1 km/h

• Tractive force........................................ 91,8 kN • Gradeability max..................................55 % • Dual circuit brake..............................multi-disc • Parking brake....................................multi-disc

U N D E R C ARRIAGE

TECHNICAL DATA

• 40 ton special excavator axles • Steering axle with automatic oscillating axle locking

• 8 tires (twins)................... PR 16 10.00 - 20

F I L L C A PACITIES • Fuel tank ...................................... 389 Liter • Cooling system . ............................. 42 Liter

• Engine oil............................................. 20 Liter • Hydraulic tank.................................... 216 Liter

• Hydraulic system.................................290 Liter

CONTROL: • Ergonomic joysticks with proportional slide control • Slim, height- and angle adjustable steering column • Indicators, controls and operating switches are clearly arranged

CLIMATE CONTROL:

D R I V E R ´ S CAB • Meets latest safety standards • Extra large entry zone • Spacious leg room • Excellent circumferential visibility • Preparation for radio installation with mute function DRIVER’S SEAT: • Air-cushioned comfort seat (optional seat heating) • Arm rests and lumbar support • Seat adjustable separately from console

• Air conditioning equipped as standard • Excellent air distribution through optimally arranged nozzles

SOUND LEVELS: MONITORING: • Operating data display screen • Automatic system for monitoring, warning and storage of data

• ISO 6396 (LPA) in driver’s cab..........74 dB(A) • 2000/14 EG (LwA) ambience level..103dB(A)

O P E R ATING WEIGHTS ADJUSTABLE BOOOM Base arm 1,95 m (C23.41), Boom 4,23 m (C25.46), Stick 2,65 m (D21.33) Support and dozer blade/ outriggers * Power boost switch .Operating weights for road travel with a driver, completely filled and 1,0 t attachment

22,6 t

220W E Q U IP M E N T BASIC UNIT ATLAS 220W

• Wheel excavator 220W, support and dozer blade on ridig axle, 2x outrigger support on steering axle, 2 lifting cylinders (A23.33) BOOM: •A djustable boom consisting of base arm 1,95 m (C23.41) with adjustable cylinder and boom 4,23 m (C25.46) with stick cylinder

STANDARD BASIC EQUIPMENT:

• Seat can be adjusted separately from console

Engine:

• Rear view security camera with 5 inch LCDcolour monitor

• Automatic idling system • Diesel prefilter

• Heat absorbing glass, tinted windows • Automotive drive and cruise control

• Engine monitoring

• Operating data display screen

Hydraulic system: • Proportional grab and grab rotating function • Accumulator for emergency lowering of boom system • Pipe-break protection valves for lifting cylinders

STICK: • Stick 2,65 m (D21.33) for adjustable boom BUCKET TIPPING CYLINDER: • Bucket tipping cylinder with bucket linkage (F25.1A)

• Ready for electric cooling box • Different options for storage, compartment for documents • Bottle holder Superstructure:

• Max. load-limit control

• Fold-away condenser

• Cylinder end position damping

• Spacious and lockable storage space in superstructure

Cab:

UNDERCARRIAGE:

• Air conditioning

• Power shift transmission

• P reparation for radio installation with mute function • Slim, height and angle adjustable steering column

• Wet disc brakes • Toolbox in undercarriage

• Alarm-signal while driving

• Refueling pump

Equipment: • Automatically controlled and monitored electric central lubrication system

• Engine speed adjustment via potentiometer

• Second toolbox in undercarriage

• Auxiliary heating • Cold start assistance

• Transport cover of bucket from 1000mm to 1300mm • Traction motor guard

Hydraulic system: • Hydraulic kit, to operate front and rear supports separately • Hydraulic kit, to operate supports per axle separately • Biodegradable oil

Cab: • Cab protection guard

• GPS/GSM Telemetriebox, for monitoring of operating data, fuel consumption, location • Radio/CD/MP3, front AUX in, USB • Electric cooling box • Working lights, Xenon-version • Head rest • .Proportional control of supports by slide in joystick

• Heated driver's seat • Cab elevation

Further special equipment: see price list

EQUIPMENT: • Joint bearings in stick and bucket cylinders • Combined lubricating points for swing bearing and arm equipment

Engine:

• Beacon light

AT TA C H M E N T S (SELECTI O N) Capacity SAE Cutting width

Bucket F63.15

Bucket* F63.26

Bucket* F63.27

Bucket* F63.28

Bucket F63.29

Trench bucket F63.35

0,75 m3 850 mm

0,83 m3 1000 mm

0,93 m3 1100 mm

1,14 m3 1300 mm

1,34 m3 1500 mm

1,14 m3 1300 mm

* A German road authorization under §70 StVZO says only buckets from 1000 mm to 1300 mm cutting width are possible!

Lifting capacities Adjustable boom: Base arm C23.41, boom 4,23 m (C25.46) with stick 2,65 m (D21.33). Max. reach 10,25 m 3,0 m

Height 9,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0m - 1,5 m - 3,0 m - 4,5 m

4,0 m

5,0 m

5,5 m

6,0 m

6,5 m

7,0 m

7,5 m

8,0 m

8,5 m

LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE LENGTHWISE CROSSWISE

supported unsupported supported unsupported supported unsupported supported unsupported supported unsupported supported unsupported supported unsupported supported unsupported supported unsupported supported unsupported

10337 10337 12768 12768 16594 16594 21384 16738* 23715 16551* 23481 16481*

10337 10337 12768 11496 16594 11470* 21384 11045* 23715 10892* 22069* 10836*

7714 6835 6835 10261 10261 12415 10405* 13651 10261* 15432 10288* 16564 10224* 16834 10067* 16077 9829*

7714 7714 6835 6835 10261 8020* 12415 7751* 13564* 7622* 13628 7602* 13842* 7280* 13942* 7143* 12443* 6935*

6904 6904 7295 7295 8653 7691* 10063 7506* 11628 7418* 12692 7440* 12808 7312* 13054 7070* 11184 6899*

6904 6084* 7295 6033* 8653 5895* 9650 5751* 9538* 5670* 9553* 5618* 9732* 5387* 9457* 5168* 8547* 5013*

6904 6875* 7108 6831* 8100 6705* 9087 6571* 10317 6502* 11306 6544* 11504 6375* 11797 6068* -

6904 5277* 7108 5275* 8100 5181* 8374* 5079* 8289* 5018* 8314* 4938* 8395* 4744* 8062* 4463* -

6696 5981* 6958 6011* 7589 5926* 8381 5835* 9328 5793 10172 5805* 10444 5576* 10645 5295* -

6696 4550* 6958 4664* 7511* 4608* 7390* 4537* 7328* 4504* 7368* 4832* 7267* 4170* 6998* 3910* -

5074 5074 6820 5343* 7159 530*0 7812 5237* 8567 5225 9296 5134* 9480* 4870* 9445 4686* -

5074 3933* 6759* 4122* 6684* 4135* 6600* 4093* 6562* 4072* 6616* 3896* 6355* 3641* 6170* 3470* -

6610 4715* 6865 4777* 7346 4754* 7976 4680* 8437* 4508* 8481* 4309* 8022 4198* -

6034* 3600* 6006 3676* 5957* 3669* 5954* 3579* 5818* 3409* 5618* 3218* 5511* 3114* -

5469 4146* 6625 4224* 6997 4215* 7518 4132* 7684 3995* 7543* 3843* -

5332* 3149* 5409* 3226* 5396* 3220* 5311* 3141* 5171* 3007* 5022 2864* -

6053 3741* 6743 3741* 6991* 3675* 6883* 3566* 6794* 3476* -

4814* 2838* 4810* 2837* 4741* 2775* 4630* 2672* 4544* 2587* -

5820 3333* 6291* 3283* 6196 3208* -

4309* 2510* 4260* 2463* 4184* 2391* -

The given max capacity values in kilograms (kg) were determined acc. to ISO 10567 and include a stability factor of 33 %or 87% of the hydraulic lifting capacity. These values are applicable at the top of the arm (without bucket tipping cylinder and guide rod) with optimum positioning of the corresponding arm system and with power boost switched on. *Value limited due to hydraulics.

EQUIPMENT/CAPACITIES

A D D I T ION A L E Q UIPMENT

Dimensions Equipment: Base arm C23.41, boom 4,23 m (C25.46) with stick 2,65 m (D21.33) 2600

2500

Transport length

1230

3130

3080

C

935

420 2600 4965

2740 2750 9750

2150 4140 3500

Working ranges of adjustable boom 12 4000

11 10 9 8

Roadtravel setup

4

7600

5

9730

6

Stick D21.33 - Length 2650 mm

2 1 0

DIMENSIONS

6500

-4

5080

-1

-3

Equipment Equipment: A 23.33, C23.41, D21.33, F25.1A, F63.28 A Max. digging height mm 11150 B Max. dumping height mm 7600 C Max. dumping height mm 6500 D Max. digging reach mm 10250 Max. digging reach at ground level mm 10100 Bucket digging force kN 176 Stick digging force kN 110

3

-2

11150

7

-5 -6 -7

8820 10250

0

1

2

3

4

5

-8 6

7

8

9

10

11

www.atlasgmbh.com ATLAS Maschinen GmbH EXCAVATORS Atlasstrasse 6 27777 Ganderkesee, Germany T: +49 (0) 4222 954 0 F: +49 (0) 4222 954 343 info@atlasgmbh.com 220W-EN (1) Effective date: August 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied.

Products and services listed may be trademarks, service marks or trade-names of Atlas Maschinen GmbH and/or its subsidiaries. All rights are reserved. Atlas® is a registered trademark of Atlas Maschinen GmbH. Copyright © 2010 Atlas Maschinen GmbH. Ref. no. 6141713