MATERIAL -
Cardboard. A bulb holder. A light bulb. A flat battery. Flex. A okume plank. Wood strips. Roll to laminate. Clips. Isolating tape. Nails. Glue (white).
TOOLS -
Screw driver (star shape). Drills. Markers. Scissors. Ruler.
MAKING THE CONNECTOR IS VERY DIFFICULT. WHAT CAN WE DO? WE NEED HELP!
DON’T WORRY! IT IS NOT SO DIFFICULT. LET’S START!!!
HEY BOYS! WHAT IS THIS TOOL? IT’S VERY STRANGE! JOSU, WHAT’S THIS?
PROCEDURE 1. Make a wooden base using 4 wood strips. Make a square with the strips and stick them using white glue. 2. Cover the wooden base with a okume plank. Stick it on top.
3. Draw and colour your area’s map and later cut it.
OH NO, WHAT A MESS! MY SWEATER IS FULL OF GLUE.
AITOR, BE CAREFUL WITH THE GLUE. ONLY A LITTLE IS ENOUGH.
WHAT A DISASTER! I THINK THEY NEED HELP.
4. You will need a big cardboard. Cut two pieces, as big as the okume plank, in order to cover the wooden base.
5. Stick the map on the left of the top cardboard. Write the vocabulary you will use in your game on the right (rivers, mountains...). Later, laminate the cardboards and stick the top one.
THIS IS VERY DIFFICULT. IT’S NOT FAIR!
MY HANDS ARE STICKY! AAAAAH…THIS IS A DISASTER.
OH NO! MY FINGER.STUPID SCISSORS. I NEED A PLASTER.
6. Drive in the nails in each point, drills are very useful now. Number the nails at the back, give a number to each mountain and give the same number to the corresponding village.
OH NO! WHAT A GROUP. WE WILL NEVER FINISH THE CONNECTOR.
YERAI, STOP SINGING. I NEED TO CONCENTRATE!
LET’S SING TOGETHER. I’M SINGING IN THE SHOW, LALALALA…
7. Now the most difficult task: cut some pieces of flex, cut about 2 cm of plastic from each end of the pieces of flex and twist the little wires. Make a small hook at the ends of the flex. Then hook all the numbers. Number 1 in the village goes with mountain number 1. Number 2 in the .......
8. Drill a hole for the lampholder between the map and the list of mountains and find an appropriate place for the battery, fix it to the plank using isolating tape.
I’M THE STRONGEST BOY IN THE UNIVERSE. AAAAAHHH!!!
NUMBER FOUR GOES WITH ATXONDO. NUMBER 5 GOES…… OH NO, I’M LOST!
THE MOST DIFFICULT WORK IS FOR ME AGAIN. THIS IS NOT FAIR. I NEED HELP!!!
9. Cut three longer pieces of flex, cut about 2 cm of plastic from each end and twist the wires. Then make a small hook at the ends of the flex and hook two of the pieces of flex around the holes of the bulb holder. Hook the end of one piece of flex onto the positive pole of the battery and tie it round the other piece of flex goes out with a clip. Hook the third piece of flex onto the negative pole and tie it round, hook the other end to a clip, this end goes out too.
IVAN, IVAN, IVAN. WHAT DO YOU PREFER BLACK TAPE OR WHITE TAPE? WHICH ONE IS BETTER?
IVAN, IVAN, IVAN. THIS IS VERY DIFFICULT. I NEED HELP, PLEASE! IVAN, IVAN, IVAN… WHAT A GROUP! WE WILL NEVER FINISH THE CONNECTOR THIS WAY!
10. The connector is nearly ready to play but first you have to cover the back with a laminated cardboard.
OH NO! WHAT A MESS! CAN YOU HELP ME WITH THE ISOLATING TAPE? THIS IS VERY DIFFICULT.
I’M GOING TO PUT THE LIGHT BULB. AHAHA…THIS IS VERY EASY!
NO
COME ON ANDER, YOU CAN DO IT! IT IS NOT SO DIFFICULT!
NOW THE CONNECTOR IS READY TO PLAY MATCH THE VILLAGES AND THE MOUNTAINS AND IF YOU ARE RIGHT YOU WILL SEE THE LIGHT. GOOD LUCK!!!
NAROA, WHERE IS ANBOTO? IS IT IN ERMUA? IS IT IN EIBAR?
DON’T BE SILLY, WHAT A QUESTION! ANBOTO IS IN DURANGO.
HURRAY! WE HAVE FINISHED THE CONNECTOR. WELL DONE GROUP!