Manual and installation instructions Technology by:
1
TigerShark
boat lift solutions
Table of contents Getting started....................................................................... 3 Control panel....................................................................................................................... 4 Raise/lower the boat using automatic systems.....................................................................4 Raising/lowering the boat manually..........................................................................................5 Adjusting the boat hoist level....................................................................................................6 Raising/lowering the boat outside of the boat hoist’s stopping positions.....................7
Remote control.................................................................................................................... 8 Raising/lowering the boat using remote control..................................................................8 Other remote control functions:.......................................................................................... 10
Installation............................................................................ 11 Limit switch..................................................................................................................................12 Functional description of limit switch...................................................................................13 Adjustment of limit switch (hoist)..........................................................................................14 Adjusting the limit switch (lowering).....................................................................................15 Connection of limit switch to control panel.......................................................................16
Installation............................................................................ 17 Mounting the limit switch into the hoist motor.................................................................18
General notice...................................................................... 24 Installation............................................................................ 25 Connecting hoist motors to the control panel................................................................. 26 Standard color coded motor........................................................................................................... 26 Standard T-motor.............................................................................................................................. 28 Eastbay motor..................................................................................................................................... 30 AO Smith motor................................................................................................................................. 32 Leeson Balldor motor........................................................................................................................ 34 General Electric motor..................................................................................................................... 36 Century Magnatech motor.............................................................................................................. 38 Emerson motor...................................................................................................................................40 Leeson motor....................................................................................................................................... 42 Baldor motor.......................................................................................................................................44
Appendix............................................................................... 46 Connection schematics............................................................................................................ 47 Wire size recommendation chart......................................................................................... 56 Pairing a transmitter to the TigerShark............................................................................... 58
2
Getting started How to use the control panel and the remote control for the boat hoist
Explanation of signs: = Quick press
= Hold down/up
3
TigerShark
boat lift solutions
OVERIDE
BOAT UP
OFF
AUTORUN
Control panel AUTO ON BOAT DOWN Raise/lower the using automatic systems OVERIDE BOAT boat UP
OFF
AUTO ON
OFF
AUTORUN AUTORUN
You can use the automatic systems to raise or lower the boat to a preset position OVERIDE BOAT UP up/down lever. The boat can be raised or lowered to by briefly pressing the boat the position set as the end point during installation. See page 12.
AUTO ON OVERIDE
BOAT DOWN
BOAT DOWN BOAT UP
OVERIDE
OFF
BOAT UP
AUTO ON
OFF
BOAT DOWN
BOAT DOWN BOAT UP
OVERIDE
BOAT UP
AUTO ON
OFF
AUTO ON OVERIDE
OFF
AUTORUN AUTORUN
AUTORUN AUTORUN
Raising the boat automatically:
BOAT DOWN
Lowering the boat automatically:
OVERIDE
OFF
BOAT UP
AUTO ON
OFF
BOAT DOWN
AUTO ON OVERIDE
BOAT DOWN BOAT UP
OVERIDE
BOAT UP
4 FF
RUN
AUTORUN
BOAT DOWN BOAT UP
AUTORUN
AUTO ON OVERIDE
OVERIDE
OFF
BOAT UP
BOAT UP
AUTO ON
OFF
AUTORUN AUTORUN
OVERIDE
BOAT DOWN
AUTO ON
BOAT DOWN
AUTORUN AUTORUN
OVERIDE BOAT UP Raising/lowering the boat manually
OFF
OFF
You can lower or raise OVERIDE BOATthe UP boat manually without using the automated stopping system. When the boat has been raised or lowered to its final position, the hoist turns off. The boat is only raised or lowered as long as the lever is held up or down. The boat can be lowered or raised to the position set as the end position. AUTO ON BOAT DOWN See page 12. AUTO ON OVERIDE
BOAT DOWN BOAT UP
AUTORUN
OFF
BOAT UP
AUTO ON
OFF
BOAT DOWN
BOAT DOWN BOAT UP
OVERIDE
BOAT UP
AUTO ON
OFF
AUTO ON OVERIDE
OFF
AUTORUN AUTORUN
OVERIDE
AUTORUN
Raising the boat manually:
BOAT DOWN
Lowering the boat manually: BOAT DOWN BOAT UP
OFF
AUTORUN
AUTO ON OVERIDE
AUTO ON
BOAT DOWN
5
AUTORUN AUTORUN
TigerShark
boat lift solutions
BOAT UP OFF OFF
OVERIDE
AUTO ON
BOAT DOWN
Adjusting the boat AUTO ON hoist BOATlevel DOWN
OFF OFF
AUTORUN AUTORUN
LEVEL
You can adjust the level of the hoist motors using the control panel. Do this by OVERIDE BOAT UP turning off one of the motors using the LEVEL breaker. This may be necessary if OVERIDE BOAT UP ON the boat hoist is on a slant or if a level adjustment must be performed for other reasons. WARNING! Be careful when adjusting the level, as too high an adjustment can endanger the boat hoist’s load. AUTO ON AUTO ON
OFF
BOAT DOWN BOAT DOWN
Adjusting the level of the hoist upward:
BOAT UP
OVERIDE
BOAT UP
OFF
AUTO ON
BOAT DOWN
AUTO ON
BOAT DOWN
OVERIDE OVERIDE
BOAT UP BOAT UP
OFF
Note! The motor used for level adjustment varies depending on the boat hoist. Check with your installer before use.
OFF OFF
LEVEL
AUTORUN AUTORUN
ON
OFF OFF
LEVEL
AUTORUN AUTORUN
ON
OVERIDE
AUTO ON
BOAT DOWN
BOAT DOWN Adjusting the level of the AUTO hoistONdownward: OVERIDE
OFF
BOAT UP
OFF
LEVEL
AUTORUN
ON
AUTO ON
BOAT DOWN Note! The motor used for level adjustment varies depending on the boat hoist. Check with your installer before use.
6
Raising/lowering the boat outside of the boat hoist’s stopping positions. You can lower or raise the boat outside of the preset stopping positions for the boat hoist. This can be useful (i.e. at high or low tide), when the hoist doesn’t reach high or low enough. Hold the lever toward the STOP POSITION to get OVERIDE BOAT UP past the automatic stop. OFF
AUTORUN
WARNING! Raising/lowering the boat outside of the preset end positions can lead to serious equipment damage if proper care is not exercised. For this reason, be very careful when using this function.
AUTO ON DOWN Raising outside of stop BOAT positions: BOAT UP
OFF
AUTORUN
OVERIDE
BOAT DOWN
OVERIDE
BOAT UP
OFF
AUTORUN
AUTO ON
Lowering AUTO outside of stopBOAT positions: ON DOWN
OFF OFF
BOAT UP BOAT UP
AUTO ON AUTO ON
BOAT DOWN BOAT DOWN
OVERIDE
BOAT UP
OVERIDE
BOAT UP OFF
NTORUN
AUTORUN AUTORUN
OVERIDE OVERIDE
7
TigerShark
boat lift solutions
Remote control Raising/lowering the boat using remote control You can automatically lower or raise the boat to a preset position by briefly pressing either the up or down button. The boat is lowered or raised to the position set as the end point during installation.
Raising the boat automatically:
1
2
Press both a足 rrow buttons to turn 足transmitter power on.
2
Pressing the up button will raise the boat hoist to the stop position.
8
The LED turns on.
Lowering the boat automatically:
1
2
Press both a足 rrow buttons to turn 足transmitter power on.
2
Pressing the down button lowers the boat hoist to the stop position.
9
The LED turns on.
TigerShark
boat lift solutions
Other remote control functions: The remote control can also be used to control other objects on or around the boat. The standard remote control supports the control of two different objects. You will find suggestions below. Your re seller can provide you with a 足transmitter that allows you to control several objects at once. Contact your re seller for more information. Please note that extra equipment may be required.
Other objects may include jet ski hoists, harbour cranes, boat cranes, ramps or boat traverses.
10
Installation How to install the control panel
WARNING! This section of the manual is only for licensed 足electricians and installers. Interference with high-voltage equipment is illegal for 足individuals without the required 足training/authorization.
WARNING
Hazardrous voltage
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
11
WARNING
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
TigerShark
boat lift solutions
Limit switch The limit switch is connected to the boat hoist motor. With the help of a microbreaker, this unit senses how high or how low the boat hoist has been moved. When the boat hoist is in the top position, a high position breaker cuts the power to the motor. When the boat hoist is in the bottom position, a low position breaker cuts the power to the motor.
Micro-breakers
Adjustment screws
Breaker handle
Motor connection
12
Functional description of limit switch The limit switch, which connects to the engine axle, is turned when the engine axle is spinning, turning the breaker handle in turn. The breaker handle should be adjusted so that when the engine axle is spinning enough, (i.e. when the hoist is in the desired top or bottom position), the micro-breakers engage to cut the power to the motor. WARNING! Be careful to check which breaker handle is for the top position and which is for the bottom position. This depends on how the limit switch is installed.
Micro-breakers
Adjustment screws
Breaker handle
Motor connection
13
TigerShark
boat lift solutions
Adjustment of limit switch (hoist) In order for the limit switch to work properly, it needs to be adjusted upon installation. This is done in two steps, first when the boat hoist is in the top position, and then when it is in the bottom position - this is when the breaker handles are adjusted.
Adjust the boat hoist or the hoisting motors to the position that corresponds to the hoist’s top position. That is, the highest position you want to be controlled by “AUTORUN.”
NOTE! In this example, the lower breaker has been chosen to control the lowering relay. This may vary by installation. Depending on how the position indicator is attached, the meaning of the breakers may be reversed. For this reason, take the necessary precautions during installation and testing to prevent damage to people or property.
When the hoist is in the desired top position, turn the screw that corresponds to the handle/breaker you selected to regulate the height. Turn the screw until the breaker handle activates the micro-breaker with a click. When the breaker handle reaches this position during a hoist, the micro-breaker will cut power to the relay that controls the hoist function. NOTE! This function must be checked carefully to avoid incorrect boat hoist operation.
14
Adjusting the limit switch (lowering) In order for the limit switch to work properly, it needs to be adjusted upon installation. This is done in two steps, first when the boat hoist is in the top position, and then when it is in the bottom position - this is when the breaker handles are adjusted.
Adjust the boat hoist or the hoisting engines to the position that corresponds to the hoist’s bottom position. That is, to the lowest position you want to be controlled by “AUTORUN.”
NOTE! In this example, the lower breaker has been chosen to control the lowering relay. This may vary by installation. Depending on how the position indicator is attached, the meaning of the breakers may be reversed. For this reason, take the necessary precautions during installation and testing to prevent damage to people or property.
When the hoist is in the desired bottom position, turn the screw that corresponds to the handle/breaker you selected to regulate the lowering function. Turn the screw until the breaker handle activates the micro-breaker with a click. When the breaker handle reaches this position during lowering, the micro-breaker will cut the power to the relay that controls the lowering function. NOTE! This function must be checked carefully to avoid incorrect boat hoist operation.
15
TigerShark
boat lift solutions
Connection of limit switch to control panel Below, you’ll see how the connections should be drawn from the micro-breakers’ poles to the connection console in the control panel.
Connection box in control panel
1 2 3
R1 B1 O1 N
C
R2 B2 O2 N
L2 L1 N
C
A
B
A
BLUE
B
RED
A
BLACK
WARNING! It is very important that this phase of the installation is carefully thought out and performed with precision. If the micro-breakers are connected incorrectly, thus disabling them, the hoist will NOT stop at the automatic stop positions, leading to serious equipment damage as a result. For this reason, test the hoist equipment without the automatic hoisting features before installation. See “Raising/lowering the boat outside of the boat hoist’s stopping positions.” for information on how to do this.
A C A B
TIP: If the boat hoist does not stop at the end position, you can remedy this by switching conductors 2(B) and 3(C) in the connection box. This will reverse the breaker handles’ functionality.
WARNING Moving parts can crush. Exposed mechanical parts of boat lift equip. Stay away from boat lift when operating.
16
Installation How to install the limit switch WARNING! This section of the manual is only for licensed 足electricians and installers. Interference with high-voltage equipment is illegal for 足individuals without the required training/authorization.
WARNING
Hazardrous voltage
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
17
WARNING
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
TigerShark
boat lift solutions
Mounting the limit switch into the hoist motor The installation of the limit switch may vary depending on the type of boat hoist it is being installed on. Below are some examples.
Limit switch
Crankshaft Hoist motor
In the image, the limit switch is mounted at a 90 degree angle to the crankshaft. The motor connection’s cogwheel on the limit switch is connected to a cogwheel on the boat hoist’s crankshaft. NOTE! This function must be checked carefully to avoid incorrect boat hoist operation.
18
Crankshaft
Limit switch
Crankshaft
Limit switch
19
TigerShark
boat lift solutions
Option 2
Limit switch
Crankshaft
20
Option 3
Limit switch
Crankshaft
21
TigerShark
boat lift solutions
Option 4
Limit switch
22
Intentionally left blank
23
TigerShark
boat lift solutions
General notice The TigerShark system is delivered in a 230V (2 phase 115V) version. The reason behind this is to minimize the following if the wrong installation is performed: • Possible transformer blowout • Possible contactor blowout • Possible motor destruction and or fire
24
Installation How to connect hoist motors to the control panel There are a number of different motor solutions on the market. We present the most COMMON ones here. NOTE: Your motor MAY NOT be pictured Read the instructions for your motor for the correct connection. Tele Radio cannot be held responsible for connections made OUTSIDE the TigerShark box.
WARNING! This section of the manual is only for licensed electricians and installers. Interference with high-voltage equipment is illegal for individuals without the required training/authorization.
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify connections to your boat lift as many motors change over time. Tele Radio will not be responsible for improper connections.
WARNING
Hazardrous voltage
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
25
WARNING
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
TigerShark
boat lift solutions
Connecting hoist motors to the control panel WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
= Screw
Standard color coded motor 230 V
= Pin A.O. Smith, Baldor, Dayton, Electrogear, Emerson, Leeson, Lincon, Marathon and other colored motor wires.
NOT USED
RED
BLACK
ORANGE
MOTOR BLACK
Motor WHITE
Motor YELLOW
Motor RED
Motor 1
Motor BLUE
GROUND
NOT USED
ORANGE
R2 B2 O2 N
MOTOR BLACK
Motor WHITE
BLACK
RED Motor ORANGE
Motor YELLOW
Motor BLUE
Motor RED
GROUND
R1 B1 O1 N
Motor ORANGE
= Cap
Wiring symbols
Motor 2
TIP: To change direction, switch MOTOR RED & BLACK.
26
B
C
27
Motor BLACK
A WHITE
ORANGE
R1 B1 O1 N
Motor WHITE
C
RED
B
BLACK
ORANGE
BLACK
RED
GROUND
R2 B2 O2 N
Motor YELLOW
GROUND
A
Motor ORANGE
Motor BLACK
Motor WHITE
Motor ORANGE
Motor YELLOW
Motor BLUE
Motor RED
R1 B1 O1 N
Motor BLUE
WHITE
ORANGE
BLACK
RED
GROUND
From 230 V to 115 V
1 2 3
Motor RED
Motor BLACK
Motor WHITE
Motor YELLOW
Motor ORANGE
Motor BLUE
Motor RED
Changeover process
230 V
L2 L1 N
Add WHITE cable and wire together with Motor BLACK
Wire together Motor ORANGE with Motor BLUE and TigerShark BLACK Wire together Motor WHITE with Motor BLUE and TigerShark BLACK
D
NOTE: Do this change on both motors!
115 V R2 B2 O2 N
A
B
C
D
D
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Standard T-motor 230 V
A.O. Smith, Baldor, Dayton, Deco, GE, Electrogear, Emerson, Leeson, Lincon, Marathon, SMC and other T-numbered motor wires.
Motor 1
NOT USED
ORANGE
T5
T2
BLACK
RED T3
T4
T1
T8
GROUND
NOT USED
ORANGE
R2 B2 O2 N
T5
T2
BLACK
RED T3
T4
T1
T8
GROUND
R1 B1 O1 N
Motor 2
TIP: To change direction, switch MOTOR RED & BLACK.
28
BLACK
GROUND
R2 B2 O2 N
L2 L1 N
ORANGE
R1 B1 O1 N RED
1 2 3
From 230 V to 115 V
Changeover process
230 V
Add WHITE cable and wire together with Motor T5
Wire together Motor T3 with Motor T1 and TigerShark BLACK
A B
Wire together Motor T2 with Motor T4 and TigerShark ORANGE
C D
T5
T2
T3
T4
T1
T8
NOTE: Do this change on both motors!
115 V
A
WHITE
ORANGE
RED
BLACK
GROUND
R2 B2 O2 N
WHITE
ORANGE
RED
BLACK
GROUND
R1 B1 O1 N
A B
B C
C
29
T5
T2
T4
T3
T1
T8
D
T5
T2
T4
T3
T1
T8
D
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Eastbay motor 230 V
5
D
1
JU M PE R WIRE
3
NOT USED
ORANGE
RED
A 4
E
BLACK
B
2
BLUE
Motor 1
Motor 2
TIP: To change direction, switch E(RED) & D(Orange).
30
5
D
3
E
JU M PE R WIRE
C
YELLOW
C
YELLOW
GROUND
NOT USED
A 4
2
ORANGE
RED
B
R2 B2 O2 N
BLUE
1
BLACK
GROUND
R1 B1 O1 N
RED
BLACK
R2 B2 O2 N
ORANGE
Move TigerShark ORANGE cable from “C” to “D”
1
R1 B1 O1 N GROUND
1 2 3
Add a WHITE cable between “N” and “B”
Move TigerShark BLACK cable from “A” to “E”
B
A
2
5
D
Remove the JUMPER WIRE
C
3
E
Move Motor BLUE cable from “3” to “2”
Move TigerShark RED cable from “E” to “A” Move Motor YELLOW cable from “4” to “5”
BLUE
A
5
D
1
4
2
B
3
E
C
BLUE
31
WHITE
A
5
D
3
E
4
2
YELLOW
BLUE
C
RED
GROUND
WHITE
ORANGE
RED
B
R 2 B2 O 2 N
YELLOW
1
BLACK
GROUND
R 1 B1 O 1 N
ORANGE
YELLOW
NOTE: Do this change on both motors!
JU M PE R WIRE
4
115 V
L2 L1 N
BLACK
From 230 V to 115 V
Changeover process
230 V
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
AO Smith motor 230 V
2 L2
Motor 1
NOT USED
ORANGE
RED
3
5
Motor BLUE
L1
Motor RED
Motor ORANGE
4
Motor BLACK
Motor YELLOW
Motor BLUE
Motor RED
Motor ORANGE
1 L1
Motor WHITE
5
BLACK
GROUND
NOT USED
ORANGE
RED
3
R 2 B 2 O2 N
4
Motor BLACK
Motor WHITE
2 L2
Motor YELLOW
1
BLACK
GROUND
R1 B1 O1 N
Motor 2
TIP: To change direction, switch 足MOTOR RED & BLACK.
32
R2 B2 O2 N
ORANGE
GROUND
RED
R1 B1 O1 N BLACK
1 2 3
L2 L1 N
Add a WHITE cable to “N” and wire together with Motor BLACK
Move BLUE jumper from “5” to “4”
1
2 L2
3
5
4
L1
Move Motor BLACK and wire together with newly added WHITE cable
NOTE: Do this change on both motors! Motor BLUE
Motor RED
Motor ORANGE
Motor YELLOW
Motor WHITE
Motor BLACK
Motor RED
Motor BLUE
33
WHITE
ORANGE
3
5
4
L1
Motor BLUE
2 L2
RED
GROUND
1 L1
Motor RED
5
Motor BLACK
Motor BLACK WHITE
ORANGE
RED
3
R2 B2 O2 N
4
Motor ORANGE
2 L2
Motor YELLOW
Motor WHITE
1
BLACK
GROUND
R 1 B1 O 1 N
BLACK
115 V
Motor WHITE
Motor YELLOW
Move Motor WHITE to position “1”
Motor ORANGE
From 230 V to 115 V
Changeover process
230 V
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Leeson Balldor motor 230 V
Motor 1
TIP: To change direction, switch T8 & T5.
34
T5
T2
T3
NOT USED
ORANGE
T4
BLACK
RED T1
GROUND T8
T5
T2
NOT USED
ORANGE
R2 B2 O2 N
T3
T4
BLACK
RED T1
T8
GROUND
R1 B1 O1 N
Motor 2
BLACK
R2 B2 O2 N
ORANGE
GROUND
R1 B1 O1 N RED
1 2 3
From 230 V to 115 V
Changeover process
230 V L2 L1 N
Add a WHITE cable to “N” and wire together with Motor T5
NOTE: Do this change on both motors! Wire together cable T3 with cable T1 and TigerShark BLACK
T5
T2
T3
T4
T1
T8
Wire together cable T2 with cable T4 and TigerShark ORANGE
115 V WHITE T5
BLACK
ORANGE T2
RED T4
T3
GROUND
35
T1
T8
WHITE
R 2 B2 O 2 N
T5
BLACK
ORANGE T2
RED T4
T3
T1
T8
GROUND
R 1 B1 O 1 N
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
General Electric motor 230 V
2
1
4
2
A
1
NOT USED
Motor YELLOW
Motor RED
Motor BLACK
Motor 1
Motor WHITE
5
Motor YELLOW
Motor RED
Motor WHITE
4
A 5
Motor BLACK
ORANGE
BLACK
GROUND
RED
R2 B2 O2 N
NOT USED
ORANGE
BLACK
GROUND
RED
R1 B1 O1 N
Motor 2
TIP: To change direction, switch MOTOR RED & BLACK.
36
R1 B1 O1 N BLACK
RED
GROUND
2
R2 B2 O2 N
ORANGE
1 2 3 From 230 V to 115 V
Changeover process
230 V
1
L2 L1 N
Add a WHITE cable to “N” and wire together with Motor RED
Move and connect TigerShark BLACK to “1” and “5”
4
A 5
Move Motor RED cable and wire together with newly added TigerShark WHITE
Motor YELLOW
Motor RED
Motor WHITE
Motor BLACK
Move Motor WHITE and wire together with Motor YELLOW and TigerShark ORANGE
NOTE: Do this change on both motors!
115 V
2
1
4
2
A
ORANGE
WHITE
4
37
Motor RED
Motor YELLOW
Motor WHITE
Motor BLACK
5
Motor RED
Motor YELLOW
Motor WHITE
1
A 5
Motor BLACK
BLACK
RED
GROUND
R2 B2 O2 N
WHITE
ORANGE
BLACK
RED
GROUND
R1 B1 O1 N
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Century Magnatech motor 230 V
2
1
6
2
1
6
NOT USED
ORANGE
RED
GROUND
5
BLACK
R2 B2 O2 N
NOT USED
ORANGE
RED
BLACK
GROUND
R 1 B1 O 1 N
5
Motor BLACK
Motor ORANGE
Motor WHITE
Motor YELLOW
Motor RED
Motor 1
Motor BLUE
4
Motor BLACK
Motor ORANGE
Motor WHITE
Motor YELLOW
Motor BLUE
Motor RED
4
Motor 2
TIP: To change direction, switch MOTOR RED & BLACK.
38
39
2
1
Motor BLACK
5
Motor WHITE
BLACK
WHITE
ORANGE
R1 B 1 O 1 N
RED
Motor BLACK
6
Motor YELLOW
GROUND
1
Motor ORANGE
Motor WHITE
Motor YELLOW
ORANGE
BLACK
RED
GROUND
R1 B1 O1 N
Motor WHITE
6 Motor BLUE
Motor RED
2
Motor ORANGE
WHITE
ORANGE
BLACK
RED
1 2 3
Motor RED
1
Motor BLACK
Motor WHITE
2
Motor YELLOW
GROUND
115 V
Motor WHITE
Motor ORANGE
Motor RED
From 230 V to 115 V
Changeover process
230 V
R2 B2 O2 N
4
6
L2 L1 N
Add a WHITE cable to “5”
5 4 Move Motor ORANGE to “1” Move Motor WHITE to “6”
NOTE: Do this change on both motors!
R2 B 2 O 2 N
5
4
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Emerson motor 230 V
2
NOT USED
ORANGE
RED
BLACK
GROUND
R2 B2 O2 N
NOT USED
ORANGE
RED
BLACK
GROUND
R 1 B1 O 1 N
2 3
3 1
1
Motor 1
MOTOR BLACK or T5
Motor WHITE or T2
Motor ORANGE or T3
Motor YELLOW or T4
Motor BLUE or T1
4
Motor RED or T8
MOTOR BLACK or T5
Motor WHITE or T2
Motor ORANGE or T3
Motor YELLOW or T4
Motor BLUE or T1
Motor RED or T8
4
Motor 2
TIP: To change direction, switch MOTOR RED & BLACK.
40
41
3
1
Motor BLACK
RED
WHITE
ORANGE
ORANGE
BLACK
RED
GROUND
R2 B2 O2 N
Motor WHITE
2 BLACK
R1 B1 O1 N
Motor YELLOW
GROUND
3
Motor ORANGE
Motor BLUE
Motor BLACK
Motor WHITE
Motor ORANGE
Motor YELLOW
R1 B1 O1 N
Motor RED
WHITE
ORANGE
Motor BLUE
Motor RED
1 2 3
Motor BLACK
Motor WHITE
BLACK
RED
GROUND
115 V
Motor YELLOW
Motor ORANGE
Motor BLUE
Motor RED
From 230 V to 115 V
Changeover process
230 V
L2 L1 N
Add a WHITE cable to “4”
2 Move Motor ORANGE to “3”
1 Move Motor WHITE to “1”
4
NOTE: Do this change on both motors!
R 1 B1 O 1 N
2
3
1
4
4
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Leeson motor 230 V
NOT USED
ORANGE
RED
BLACK
GROUND
NOT USED
5
5
1 3
4 1
6
3
6
Motor BROWN
Motor BLUE
Motor 1
Motor YELLOW
2 Motor PURPLE
Motor BROWN
Motor YELLOW
2
Motor PURPLE
ORANGE
R2 B 2 O 2 N
4
Motor BLUE
RED
BLACK
GROUND
R1 B1 O1 N
Motor 2
TIP: To change direction, switch ORANGE & BLACK.
42
43
4
4
3
1
Motor BROWN
Motor PURPLE
6
WHITE
ORANGE
R 1 B1 O 1 N
BLACK
BLACK ORANGE
R2 B2 O2 N
Motor YELLOW
6 Motor BROWN
1
RED
GROUND
Motor YELLOW
Motor BLUE
RED
GROUND
R1 B1 O1 N
Motor PURPLE
1 WHITE
3
Motor BLUE
3
Motor BROWN
BLACK ORANGE
1 2 3
Motor YELLOW
Motor PURPLE
Motor BLUE
RED
GROUND
From 230 V to 115 V
Changeover process
230 V
L2 L1 N Add a WHITE cable to “N” and “5”
5 Move Motor BROWN to “2”
Move Motor PURPLE to “1”
2
NOTE: Do this change on both motors!
115 V R 2 B2 O 2 N
5
4
5
6
2
2
TigerShark
boat lift solutions
WARNING: Motor connections shown are to be used as a guide. We require you to contact your boat lift dealer, motor manufacturer, installer and professional electrician to double check and verify 足connections to your boat lift as many 足motors change over time. Tele Radio will not be responsible for improper connections.
Baldor motor 230 V
4
L2
L1
ORANGE
RED
NOT USED
L1
Motor 1
Motor WHITE / T2
Motor BLACK / T5
Motor BROWN / J
Motor RED / T8
Motor WHITE / T2
3
Motor BLACK / T5
Motor BROWN / J
4
L2
3
Motor RED / T8
BLACK
GROUND
R2 B2 O2 N
NOT USED
ORANGE
RED
BLACK
GROUND
R1 B1 O1 N
Motor 2
TIP: To change direction, switch Motor RED / T8 and Motor BLACK / T5
44
45
L2
3
4
Motor BLACK / T5
L1
Motor BROWN / J
Move Motor BROWN / J to “4”
WHITE
Motor BLACK / T5
WHITE
ORANGE
BLACK
RED
GROUND
R2 B2 O2 N
ORANGE
R 1 B1 O 1 N
BLACK
4
RED
GROUND
L2
Motor WHITE / T2
4 Motor WHITE / T2
Motor BLACK / T5
Motor BROWN / J
Motor RED / T8
R1 B1 O1 N
Motor RED / T8
L2
Motor BLACK / T5
WHITE
ORANGE
BLACK
RED
GROUND
1 2 3
Motor BROWN / J
Motor WHITE / T2
Motor RED / T8
From 230 V to 115 V
Changeover process
230 V
L2 L1 N
Add a WHITE cable to “N” wire together with Motor BLACK / T5
L1
3 Move Motor WHITE / T2 to “L2”
Wire together with TigerShark WHITE
NOTE: Do this change on both motors!
115 V R 2 B2 O 2 N
L1
3
TigerShark
boat lift solutions
Appendix Internal connection schematic and wiring charts Your TigerShark unit has been delivered how it appears on the following page (Delivery design). Before connecting power you must first determine what AC voltage your boat lift requires and then proceed to change the wiring accordingly. In the following pages you will find all the different voltages that can be available at your location. Contact your boat lift manufacturer for further assistance. WARNING! This section of the manual is only for licensed electricians and installers. Interference with high-voltage equipment is illegal for individuals without the required training/authorization.
WARNING
WARNING
Hazardrous voltage
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
46
Connection schematics Delivery design
WARNING
US 230 VAC (2 phase, 115 VAC)
L2
L3
L1
L2
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
L3
1
3
5
N
2
4
6
N
230V 115V
1 2 3 4 5 6 7 8 9 10 11
L1
WARNING
Hazardrous voltage
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L2 L1 N
INCOMING NEUTRAL (N) INCOMING PHASE 1 (115V) INCOMING PHASE 2 (115V) INCOMING GROUND
LIMIT SWITCH
MOTOR 1
47
MOTOR 2
TigerShark
boat lift solutions
Change instructions Delivery design, US 230 VAC -> US 115 VAC (1 phase, 115 VAC)
Remove this conductor.
L1
L2
L3
L1
L2
L3
1 2 3 4 5 6 7 8 9 10 11
Move the red and blue conductor bundle to the connection box labelled N on the lower row of the GFIC.
1
3
5
N
2
4
6
N
230V 115V
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L2 L1 N
Switch the black 115V conductor and the brown 230V conductor. Isolate the brown 230V conductor. 48
WARNING
Connection schematic US 115 VAC (1 phase, 115 VAC)
L2
L3
L1
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
L2
L3
1
3
5
N
2
4
6
N
115V 230V
1 2 3 4 5 6 7 8 9 10 11
L1
WARNING
Hazardrous voltage
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L2 L1 N
INCOMING NEUTRAL (N) INCOMING PHASE 1 (115V)
INCOMING GROUND
LIMIT SWITCH
MOTOR 1
49
MOTOR 2
TigerShark
boat lift solutions
Change instructions Delivery design US 230 VAC -> 3 phase, 115 VAC Move the red conductor from box 5 down to L2 on the terminal strip
L2
L3
L1
L2
L3
1
3
5
N
2
4
6
N
230V 115V
1 2 3 4 5 6 7 8 9 10 11
L1
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L2 L1 N
Disconnect the brown 230V conductor and isolate. Connect Move the black conductor from L2 the black 115V conductor to connection box N on the lower to L3. row of the GFIC 50
WARNING
Connection schematic 3 phase, 115 VAC
L2
L3
L1
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
L2
L3
1
3
5
N
2
4
6
N
230V ISOLATE
115V
1 2 3 4 5 6 7 8 9 10 11
L1
WARNING
Hazardrous voltage
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L3 L2 L1 N
INCOMING NEUTRAL (N) INCOMING PHASE 1 (115VAC) INCOMING PHASE 2 (115VAC) INCOMING PHASE 3 (115VAC) INCOMING GROUND
LIMIT SWITCH
MOTOR 1
51
MOTOR 2
TigerShark
boat lift solutions
Change instructions Delivery design, US 230 VAC -> EU 230 VAC (1 phase, 230 VAC) Remove this conductor.
L1
L2
L3
1 2 3 4 5 6 7 8 9 10 11
Move the red and blue conductor bundle to the connection box labelled N on the lower row of the GFIC.
L1
L2
L3
1
3
5
N
2
4
6
N
230V 115V
1 2 3
R1 B1 O1 N
52
R2 B2 O2 N
L2 L1 N
WARNING
Connection schematic EU 230 VAC (1 phase, 230 VAC)
L2
L3
L1
L2
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
L3
1
3
5
N
2
4
6
N
230V 115V
1 2 3 4 5 6 7 8 9 10 11
L1
WARNING
Hazardrous voltage
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L2 L1 N
INCOMING NEUTRAL (N) INCOMING PHASE 1 (230)
INCOMING GROUND
LIMIT SWITCH
MOTOR 1
53
MOTOR 2
TigerShark
boat lift solutions
Change instructions Delivery design, US 230 VAC -> 380 VAC (3 phase, 380 VAC) Move the red conductor from box 5 down to L2 on the main box
L2
L3
L1
L2
L3
1
3
5
N
2
4
6
N
230V 115V
1 2 3 4 5 6 7 8 9 10 11
L1
1 2 3
R1 B1 O1 N
R2 B2 O2 N
Move the brown 230V conductor to box N on the lower row. 54
L2 L1 N
Move the black conductor from L2 to L3.
WARNING
Connection schematic 3 phase, 380 VAC
L2
L3
L1
Hazardrous voltage Contact may cause electric shock or burn. Disconnect power before servicing.
Wrongful handling may cause electric shock or burn.
Can only be installed by licensed electrician.
L2
L3
1
3
5
N
2
4
6
N
115V ISOLATE
230V
1 2 3 4 5 6 7 8 9 10 11
L1
WARNING
Hazardrous voltage
1 2 3
R1 B1 O1 N
R2 B2 O2 N
L3 L2 L1 N
INCOMING NEUTRAL (N) INCOMING PHASE 1 (L1) INCOMING PHASE 2 (L2) INCOMING PHASE 3 (L3) INCOMING GROUND
LIMIT SWITCH
MOTOR 1
55
MOTOR 2
TigerShark
boat lift solutions
Wire size recommendation chart WARNING! Use the below chart for proper wire size. Using the wrong sized wires might damage your motors and the TigerShark unit.
# Motors
(actual current)
Motor HP
Breaker size
115 V AC - 1 phase
½
1
10A (8,8A)
12
10
6
4
4
2
20A (17,6A)
10
6
4
2
1
1
15A (10,8A)
12
8
6
4
3
2
25A (21,6A)
8
6
3
1
-
1
15A (12,8A)
10
8
6
4
3
2
30A (25,6A)
8
4
2
1
-
1
20A (17,1A)
10
6
4
2
1
2
35A (34,4A)
6
4
1
-
-
¾
1
1-½
15 m 50 feet
30 m 100 feet
56
60 m 90 m 200 feet 300 feet
120 m 400 feet
# Motors
(actual current)
Motor HP
Breaker size
230 V AC - 2 phase
½
1
5A (4,4A)
14
14
12
10
10
6
2
10A (5,4A)
12
12
10
8
6
3
4
20A (17,6A)
12
10
6
4
4
2
1
10A (5,4A)
14
13
12
12
10
6
2
15A (10,8A)
12
12
10
8
6
3
4
25A (21,3A)
12
8
6
4
3
1
1
10A (6,4A)
14
14
12
12
10
6
2
15A (12,8A)
12
10
8
6
4
1
4
30A (26,0A)
10
8
4
3
2
1
1
10A (8,5A)
14
14
10
10
8
4
2
20A (17,0A)
12
10
8
4
2
1
4
40A (36,1A)
10
6
4
2
1
1/0
4
45A (44,8A)
8
6
3
1
1/0
-
¾
1
1-½
2
15 m 30 m 60 m 90 m 120 m 240 m 50 feet 100 feet 200 feet 300 feet 400 feet 800 feet
57
TigerShark
boat lift solutions
Pairing a transmitter to the TigerShark Situations might arise where you want to add a transmitter to the TigerShark boat lift (i.e. if you have lost a transmitter or you want to add another transmitter).
2
4
Press the red button on the transmitter.
58
1 2 3 4 5 6 7 8 9 10 11
3
Locate the radio unit in the box. Press and hold the learn button for about six seconds. The RED led inside should turn off.
Press and hold the learn button for about a second. The RED led inside should turn on.
1 2 3 4 5 6 7 8 9 10 11
1
1 2 3 4 5 6 7 8 9 10 11
Pairing a transmitter (performed in the TigerShark control box and with a transmitter)
The RED led inside will flash three times. The pairing process is complete.
Intentionally left blank
59
TigerShark
IM-TS-001-A1
boat lift solutions
14895 NE 20th Ave North Miami FL 33181 usa@tele-radio.com
Toll free phone 1-866-629-0780 Toll free fax 1-866-254-5850
www.tele-radio.com 60