Sira

Anywhere the solution

A ntt e n n a s

Antenna Catalogue - 2009

Via Senatore Simonetta,26 20040 Caponago (MI) - Italy tel.: +39 02.95.96.11 fax +39 02.95.96.13.11 e-mail: info@sira.mi.it www.sira.mi.it

history SIRA SIRA is a privately owned company, founded in 1977 by a group of technicians active in the telecommunication field and specialized in RF technology.

Sira has 11,000 sq.meters of manufacturing and support facility based in Caponago (MI) Italy.

SIRA is a customer oriented company, which has adopted the philosophy of working together with its customers to meet the critical technical requirements for their systems with an attitude of enthusiasm and concern in order to provide the best results in the final products.

This approach has given Sira a position of leadership in its field. Sira products are designed and manufactured in accordance with the particular international standards in force in the area.

As a major position of its cross revenues, Sira has been investing in research and development, quality and reliability control and products safety in the RF field.

This policy of investments has provided Sira with an extremely high level of experience in its field: there are Sira installations in more than 80 countries in the world.

quality

SIRA’s aim is to give to all its customers reliable products and services with the highest quality standards, this ambitious goal is achieved mainly by means of an integrated management system (Quality-Safety-environment) and is certified according to the norms UNI EN ISO 9001 (2000) and UNI EN 14001 (1996).

The enhancement of company efficiency through the continuous improvement of the operative quality of the internal functions (effectiveness), the reduction of defects on sold products and the notable attention to the quality culture at all company levels have become SIRA’s fundamental cares.

Moreover SIRA is committed in a thorough policy of environmental protection: a training and information process on all personnel is continuously carried out in order to grant a responsible management of all the activities in a special respect of the environment.

For instance, the development and the implementation of new technologies, products and production processes is carried out with a thorough control for a rational use of energetic sources and of raw materials, minimizing the production of waste and the use of non-renewable resources, everything with the aim of keeping environmental impact on air and water as lowest as it is possible.

For all SIRA’s activities it is fundamental to oppose the conditions of life and work which are against the health of the workers, as well as promoting freedom principles and self-respect for any human being.

An extract from SIRA’s ethic code states that “Sira refuses any discrimination based on sex, race, languages, personal and social conditions, religion and political choices” and to this aim Sira promotes a working environment that, inspired to the principles of respect, fairness and collaboration, is meant to support the involvement of all Employees and Contributors giving the common sense of responsibility in reaching all the Company goals.

index

FM Antennas

5

VHF Antennas

55

UHF Antennas

83

Special Antennas

105

Switching Units and Manual Switches

119

Coaxial Components

131

FM Antennas

FM-01

7

FM-03 (Hpol)

9

FM-03 (Vpol)

13

FM-04

17

FM-05H

19

FM-05V

23

FM-07

27

FM-11

29

FM-12

31

FM-14

33

FM-17

35

FM-21

37

FMC-01

39

FMC-02

41

FMC-03

45

FMC-05

49

FMC-06

53 5

FM-01

FM PANEL ANTENNA

FEATURES VERTICAL OR HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 4.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL DIPOLE

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

FM-01 FM-01/E 87.5 ÷ 108 MHz 50 ohm 7/8” EIA 5 kW ≤ 1.3 Vertical or Horizontal 4.5 dB E-Plane ± 35° H-Plane ± 56° All Metal Parts DC Grounded

2000x1400x1018 mm 2000x1400x983 mm 38 kg 37.5 kg 0.35 m2 0.51 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-01) Gray (standard) Directly on supporting mast or with pipe clamps (not supllied) 2090x1490x350 mm

Specifications are subject to change without prior notice

7

FM-01

FM PANEL ANTENNA

FEATURES

-UP -

RADIATING SYSTEMS WITH FM-01 SERIES DIRECTIONAL PATTERNS HIGH POWER SYSTEMS BROADBAND 87.5 รท108 MHz ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.3 Throughout the frequency range

VSWR

(Lower figures for individual channels on request)

Vertical or Horizontal According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 4 1 6 1 8 1 12 1 16 1

GAIN dB (1) 7.5 10.5 12.2 13.5 15.2 16.5

Subject to number of bays Refer to table Refer to table Yes Gray (standard) Not supplied As required

GAIN TIMES (1) 5.6 11.2 16.6 22.3 33.2 44.6

WEIGHT kg (2) (FM-01) 82 158 244 332 488 664

WEIGHT kg (2) (FM-01/E) 81 156 241 328 482 656

ANTENNA HEIGHT L m 4.6 9.8 15 20.2 30.6 41

WIND LOAD (3) kN 1.51 3.02 4.53 6.04 9.06 12.08

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware, for FM-01 panel.

(3) v= 150 km/h Specifications are subject to change without prior notice

8

FM-03 (Horizontal polarization) FM PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 7.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON SQUARE TOWERS STAINLESS STEEL DIPOLES SUITABLE ALSO FOR VERTICAL POLARIZATION ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FM-03 FM-03/E 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Horizontal 7.5 dB E-Plane ± 34° H-Plane ± 30° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

2200x2000x991 mm 2200x2000x956 mm 56 kg 55 kg 2 0.66 m 0.96 kN 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, silver plated berylium copper, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-03) Gray (standard) Directly on supporting mast 2290x2090x420 mm

Specifications are subject to change without prior notice

9

FM-03 (Horizontal polarization) FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-03 PANEL HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.2 Throughout the frequency range

FM-03/32 (8x4) GUANGZHOU, P.R.C.

(Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Horizontal According to requirement Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Gray (standard) Not supplied As required

Specifications are subject to change without prior notice

10

FM-03 (Horizontal polarization) FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz 0

0

270

270

90

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10 6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4

GAIN dB (1) 5.2 3.6 2 11.2 8.2 6.6 5.2 14.2 11.2 9.6 8.2 16 13 11.4 10 17.4 14.4 12.6 11.4

GAIN TIMES (1) 3.3 2.3 1.6 13.2 6.6 4.6 3.3 26.3 13.2 9.1 6.6 39.8 20 13.8 10 55 27.5 18.2 13.8

WEIGHT kg (2) (FM-03) 148 222 296 136 296 444 592 296 592 888 1184 444 888 1332 1776 592 1184 1776 2368

WEIGHT kg (2) (FM-03/E) 146 219 292 134 292 438 584 292 584 876 1168 438 876 1314 1752 584 1168 1752 2336

ANTENNA HEIGHT L m 2.2

5.4

11.8

18.2

24.6

WIND LOAD (3) kN 1.83 2.24 2.55 1.92 3.66 4.48 5.1 3.84 7.32 8.96 10.2 5.76 10.98 13.44 15.3 7.68 14.64 17.92 20.4

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware (3) v= 150 km/h

90

10

Specifications are subject to change without prior notice

11

FM-03 (Horizontal polarization) FM PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

Specifications are subject to change without prior notice

12

FM-03 (Vertical polarization) FM PANEL ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 7.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON SQUARE TOWERS STAINLESS STEEL DIPOLES SUITABLE ALSO FOR HORIZONTAL POLARIZATION ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FM-03 FM-03/E 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Vertical 7.5 dB E-Plane ± 34° H-Plane ± 30° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

2000x2200x991 mm 2000x2200x956 mm 56 kg 55 kg 2 0.66 m 0.96 kN 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, silver plated berylium copper, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-03) Gray (standard) Directly on supporting mast 2290x2090x420 mm

Specifications are subject to change without prior notice

13

FM-03 (Vertical polarization) FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-03 PANEL HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.2 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Vertical According to requirement Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

FM-03/8 (8x1) VALCAVA, ITALY

Subject to number of bays Refer to table Refer to table Yes Gray (standard) Not supplied As required

Specifications are subject to change without prior notice

14

FM-03 (Vertical polarization) FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz 0

0

270

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10 6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 3 1 4 1 2 2 3 4 1 2 4 3 4 1 6 2 3 4 1 8 2 3 4

GAIN dB (1) 5 3.2 2 10.9 8 6.2 5 13.9 11 9.2 8 15.6 12.7 10.9 9.7 17 14 12.2 11

GAIN TIMES (1) 3.2 2.1 1.6 12.3 6.3 4.2 3.2 24.5 12.6 8.3 6.3 36.3 18.6 12.3 9.3 50.1 25.1 16.6 12.6

WEIGHT kg (2) (FM-03) 148 222 296 136 296 444 592 296 592 888 1184 444 888 1332 1776 592 1184 1776 2368

WEIGHT kg (2) (FM-03/E) 146 219 292 134 292 438 584 292 584 876 1168 438 876 1314 1752 584 1168 1752 2336

ANTENNA HEIGHT L m 2

5.2

11.6

18

24.4

WIND LOAD (3) kN 1.83 2.24 2.55 1.92 3.66 4.48 5.1 3.84 7.32 8.96 10.2 5.76 10.98 13.44 15.3 7.68 14.64 17.92 20.4

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware (3) v= 150 km/h

90

270

90 10

Specifications are subject to change without prior notice

15

FM-03 (Vertical polarization) FM PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

Specifications are subject to change without prior notice

16

FM-04

FM DIPOLE ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 2 dB GAIN OMNIDIRECTIONAL PATTERN WITH PREFERRED DIRECTION STAINLESS STEEL

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FM-04

RADIATION PATTERNS (Mid Band)

FM-04/E

87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤1.25 TYPICAL Vertical 2 dB E-Plane ± 37° H-Plane ± 105° All metal parts DC grounded

1372x1137x135 mm 1372x1102.5x80 mm 10 kg 9.5 kg 0.14 m2 0.12 m 0.18 kN 0.15 kN 220 km/h Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-04) Gray (standard) With special pipe clamps ø 60 ÷ 114 mm 1480x1230x290 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

17

FREQ. (MHz)

FM-04

FM DIPOLE ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-04 SERIES OMNI DIRECTIONAL PATTERN WITH PREFERRED DIRECTION HIGH POWER SYSTEMS

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Vertical According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 4 1 6 1 8 1 12 1

- UP -

GAIN dB (1) 5 8 9.8 11 12.8

Subject to number of bays Refer to table Refer to table Yes Gray (standard) One clamp for pole, supplied As required

GAIN TIMES (1) 3.16 6.31 9.55 12.59 19.05

WEIGHT kg (2) (FM-04) 27 54 81 108 162

WEIGHT kg (2) (FM-04/E) 25.4 50.8 76.2 101.6 152.4

ANTENNA HEIGHT L m 4.0 9.2 14.4 19.6 30.0

WIND LOAD kN (3) (FM-04) 0.36 0.72 1.08 1.44 2.16

WIND LOAD kN (3) (FM-04/E) 0.3 0.6 0.9 1.2 1.8

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

(3) v= 150 km/h Specifications are subject to change without prior notice

18

FM-05H

FM PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 6.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FM-05H FM-05H/E 87.5 ÷ 108 MHz 50 ohm

RADIATION PATTERNS (Mid Band)

7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Horizontal 6.5 dB E-Plane ± 38° H-Plane ± 28° All Metal Parts DC Grounded

2500x1700x1113 mm 2500x1700x1083 mm 57 kg 56 kg 0.64 m2 0.93 kN 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, silver plated berylium copper, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-05H) Gray (standard) Directly on supporting mast 2590x1920x580 mm

Specifications are subject to change without prior notice

19

FM-05H

FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-05H PANEL HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK BROADBAND 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.2 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Horizontal According to requirement Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

FM-05H/12 (6x2) VANCOUVER, B.C., CANADA

Subject to number of bays Refer to table Refer to table Yes Gray (standard) Not supplied As required

Specifications are subject to change without prior notice

20

FM-05H

FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 FACES AT 98 MHz

TECHNICAL DATA GAIN NUMBER PANELS dB OF PER (1) BAYS BAY 1

2

4

6

8

2 3 1 2 3 1 2 3 1 2 3 1 2 3

3.3 1.6 9.5 6.5 4.8 12.7 9.7 8.0 14.5 11.5 9.8 15.8 12.8 11.1

GAIN TIMES (1) 2.1 1.4 8.9 4.5 3.0 18.6 9.3 6.3 28.2 14.1 9.6 38.0 19.0 12.9

WEIGHT WEIGHT ANTENNA kg (2) kg (2) HEIGHT L (FM-05H) (FM-05H/E) m

WIND LOAD (3) kN

144 216 144 288 432 288 576 864 432 864 1296 576 1152 1728

1.74 1.95 1.86 3.48 3.9 3.72 6.96 7.8 5.58 10.44 11.7 7.44 13.92 15.6

146 219 146 292 438 292 584 876 438 876 1314 584 1168 1752

2.5

5.7

12.1

18.5

22.4

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware (3) v= 150 km/h

Specifications are subject to change without prior notice

21

FM-05H

FM PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill

40

50

With null fill and beam tilt

Specifications are subject to change without prior notice

22

FM-05V

FM PANEL ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 6 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FM-05V FM-05V/E 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Vertical 6 dB E-Plane ± 34° H-Plane ± 36° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

2200x2000x1113 mm 2200x2000x1083 mm 57 kg 56 kg 2 0.67 m 0.98 kN 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, silver plated berylium copper, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-05V) Gray (standard) Directly on supporting mast 2290x2090x500 mm

Specifications are subject to change without prior notice

23

FM-05V

FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-05V PANEL HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK BROADBAND 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.2 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Vertical According to requirement Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Gray (standard) Not supplied As required

Specifications are subject to change without prior notice

24

FM-05V

FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 FACES AT 98 MHz

TECHNICAL DATA NUMBER GAIN PANELS OF dB PER BAYS (1) BAY 1

2

4

6

8

2 3 1 2 3 1 2 3 1 2 3 1 2 3

2.9 1.6 9 6.1 4.6 12.2 9.2 7.8 13.9 11 9.5 15.3 12.4 10.7

GAIN TIMES (1) 1.95 1.45 7.95 4.07 2.88 16.6 8.32 6 24.5 12.59 8.91 33.88 17.38 11.75

WEIGHT WEIGHT kg (2) kg (2) (FM-05V) (FM-05V/E) 132 198 132 264 396 264 528 792 396 792 1188 528 1056 1584

130 195 130 260 390 260 520 780 390 780 1170 520 1040 1560

ANTENNA HEIGHT L m

WIND LOAD (3) kN

2.2

2 2.25 2.14 4 4.5 4.28 8 9 6.42 12 13.5 8.56 16 18

5.4

11.8

18.2

24.6

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware (3) v= 150 km/h

Specifications are subject to change without prior notice

25

FM-05V

FM PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

Specifications are subject to change without prior notice

26

FM-07

FM YAGI ANTENNA

FEATURES VERTICAL OR HORIZONTAL POLARIZATION BROADBAND 87.5 108 MHz 4.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

D: 910 mm

FM-07

FM-07/E 87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤ 1.3 Vertical or Horizontal 4.5 dB E-Plane ± 32° H-Plane ± 65° All metal parts DC grounded

1684x1643x135 mm 1684 x1643 x80 mm 14 kg 13.5 kg 0.22 m2 0.20 m2 0.28 kN 0.25 kN 220 km/h Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-07) Gray (standard) With special pipe clamps ø 60 ÷ 114 mm 1890x1820x280 mm 1890x1820x230 mm

RADIATION PATTERNS (Mid Band)

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

27

FREQ. (MHz)

FM-07

FM YAGI ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-07SERIES DIRECTIONAL PATTERNS HIGH POWER SYSTEMS BROADBAND 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Vertical or Horizontal According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

- UP -

7.5 10.5 12.2 13.5 15.2

Subject to number of bays Refer to table Refer to table Yes Gray (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kg (FM-07)

WEIGHT kg (FM-07/E)

ANTENNA HEIGHT L m

5.6 11.2 16.6 22.3 33.2

32 64 96 128 192

31 62 93 124 186

4.3 9.5 14.7 19.9 30.3

WIND LOAD WIND LOAD kN (2) kN (2) (FM-07) (FM-07/E) 0.56 1.12 1.68 2.24 3.36

0.50 1.00 1.50 2.00 3.00

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) v= 150 km/h Specifications are subject to change without prior notice

28

FM-11

FM YAGI ANTENNA

FEATURES VERTICAL OR HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 5.3 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

D: 910 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FM-11

FM-11/E

RADIATION PATTERNS (Mid Band)

87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤ 1.27 Vertical or Horizontal 5.3 dB E-Plane ± 32° H-Plane ± 55° All metal parts DC grounded VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

1640x1643x135 mm 14.5 kg 0.24 m2 0.31 kN

1640x1643x80 mm 14 kg 0.22 m2 0.27 kN

220 km/h Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-11) Gray (standard) With special pipe clamps (ø 60 ÷ 114 mm) 1890x1820x280 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

29

FREQ. (MHz)

FM-11

FM YAGI ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-11YAGI-ANTENNAS DIRECTIONAL PATTERNS HIGH POWER SYSTEMS BROADBAND 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Vertical or Horizontal According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA GAIN NUMBER PANELS PER dB OF BAY (1) BAYS 2 1 8.3 4 1 11.3 6 1 13 8 1 14.3 12 1 16

Subject to number of bays Refer to table Refer to table Yes Gray (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kg (FM-11)

6.7 13.5 19.9 26.9 39.8

41 83 125 166 249

WEIGHT ANTENNA kg HEIGHT L (FM-11/E) m 40 81 122 162 243

WIND LOAD kN (2) (FM-11)

WIND LOAD kN (2) (FM-11/E)

0.63 1.26 1.87 2.5 3.76

0.55 1.1 1.63 2.18 3.27

4.3 9.5 14.7 19.9 30.3

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.(2) v= 150 km/h Specifications are subject to change without prior notice

30

FM-12

FM YAGI ANTENNA

FEATURES VERTICAL OR HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 3.7 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL DIPOLE

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

D: 910 mm

FM-12

FM-12/E 87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤ 1.35 Veretical or Horizontal 3.7 dB E-Plane ± 36° H-Plane ± 80° All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

1147x1684x165 mm 1112x1684x135 mm 10.5 kg 10 kg 2 0.17 m 0.15 m2 0.22 kN 0.19 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-12) Gray (standard) With special pipe clamps ø 60 ÷ 114 mm 1330x1920x280 mm 1330x1920x230mm

Specifications are subject to change without prior notice

31

FREQ. (MHz)

FREQ. (MHz)

FM-12

FM YAGI ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-12 YAGI ANTENNAS DIRECTIONAL PATTERN HIGH POWER SYSTEMS BROADBAND 87.5 108 MHz ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 Throughout the frequency range Vertical or Horizontal According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

6.7 9.7 11.4 12.7 14.4

Subject to number of bays Refer to table Refer to table Yes Gray (standard) One clamp for pole, supplied As required

GAIN TIMES (1) 4.7 9.3 13.8 18.6 27.5

WEIGHT kg (FM-12)

WEIGHT kg (FM-12/E)

24.5 49 73 97 145

23.5 47 70 93 139

ANTENNA HEIGHT L m 4.3 9.5 14.7 19.9 30.3

WIND LOAD WIND LOAD kN (3) kN (3) (FM-12) (FM-12/E) 0.44 0.89 1.34 1.77 2.67

0.38 0.77 1.16 1.53 2.31

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

(3) v= 150 km/h Specifications are subject to change without prior notice

32

FM-14

FM DIPOLE ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 87.5 108 MHz 2.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

FM-14 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.4 Vertical 2.5 dB E-Plane ± 32° H-Plane ± 90° All metal parts DC grounded VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

1392 x 1064.5 x 270 mm 19Kg 0.22 m2 0.31 kN 220 km/h External parts (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) With special pipe clamps ø 60 ÷ 114 mm 1600x1250x475 mm

Specifications are subject to change without prior notice

33

FREQ. (MHz)

FM-14

FM DIPOLE ANTENNA

FEATURES

- UP -

RADIATING SYSTEMS WITH FM-14 DIPOLE DIRECTIONAL PATTERNS HIGH POWER SYSTEMS BROADBAND 87.5 108 MHz ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Vertical According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

5.5 8.5 10.3 11.5 13.3

Subject to number of bays Refer to table Refer to table Yes Orange (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HEIGHT L m

WIND LOAD (3)kN

3.5 7.0 10.7 14.1 21.4

45 90 140 190 280

4.0 9.2 14.4 19.6 30.0

0.61 1.22 1.83 2.43 3.65

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware, for FM-14 dipole (3) v= 150 km/h

Specifications are subject to change without prior notice

34

FM-17

FM YAGI ANTENNA

FEATURES VERTICAL OR HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 4.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

FM-17 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.4 Vertical or Horizontal 4.5 dB E-Plane ± 32° H-Plane ± 65° All metal parts DC grounded VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

1700x1514.5x270 mm 22 kg 0.13 m2 0.28 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) With special pipe clamps ø 60 ÷114 mm 1860x1690x480 mm

GAIN (dB)

Specifications are subject to change without prior notice

35

FREQ. (MHz)

FM-17

FM YAGI ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-17 YAGI-ANTENNAS DIRECTIONAL PATTERNS HIGH POWER SYSTEMS BROADBAND 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Vertical or Horizontal According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

- UP -

7.5 10.5 12.2 13.5 15.2

Subject to number of bays Refer to table Refer to table Yes Orange (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kg (2)

ANTENNA HEIGHT L m

WIND LOAD (3) kN

5.6 11.2 16.6 22.3 33.2

50 100 150 200 250

4.3 9.5 14.7 19.9 30.3

0.57 1.14 1.71 2.28 3.42

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware, for FM-17 antenna (3) v= 150 km/h Specifications are subject to change without prior notice

36

FM-21

FM YAGI ANTENNA

FEATURES VERTICAL OR HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 5.3 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FM-21 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.35 Vertical or Horizontal 5.3 dB E-Plane ± 32° H-Plane ± 65° All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

1685x1515x270 mm 23.5 kg 0.32 m2 0.43 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) With special pipe clamps ø 60 ÷ 114 mm 1960x1860x480 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

37

FM-21

FM YAGI ANTENNA

FEATURES RADIATING SYSTEMS WITH FM-21 YAGI-ANTENNAS DIRECTIONAL PATTERNS HIGH POWER SYSTEMS BROADBAND 87.5 ÷ 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤1.25 in the operating frequency Vertical or Horizontal According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

-UP -

8.3 11.3 13 14.3 16

Subject to number of bays Refer to table Refer to table Yes Orange (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kg (2)

ANTENNA HEIGHT L m

WIND LOAD (3) kN

6.7 13.5 19.9 26.9 39.8

54 108 162 217 325

4.3 9.5 14.7 19.9 30.3

0.88 1.76 2.64 3.52 5.28

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

(3) v= 150 km/h Specifications are subject to change without prior notice

38

FMC-01

FM TOP OR SIDEMOUNT DIPOLE

FEATURES CIRCULAR/ELLIPTICAL POLARIZATION BROADBAND 87.5 ÷ 104 MHz 92 ÷ 108 MHz

D: 710 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FMC-01 87.5 ÷ 104 MHz 92 ÷ 108 MHz 50 ohm 7/8” EIA 1.5 kW ≤ 1.4 Circular/Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 3 dB with ø 100 pole All metal parts DC grounded

1439 x 802 x 802 mm 10 Kg 0.102 m2 0.36 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass) Radome (fiberglass) Feed point radome Orange (standard) With special pipe clamps ø 60 ÷ 115 mm 1550x900x900 mm

Specifications are subject to change without prior notice

39

RADIATION PATTERNS (Mid Band)

FREQ. (MHz)

FREQ. (MHz)

FMC-01

FM TOP OR SIDEMOUNT DIPOLE

FEATURES RADIATING SYSTEMS WITH FMC-01 DIPOLE OMNIDIRECTIONAL PATTERNS

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Circular / Elliptical According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

1.5 4.5 6.2 7.5 9.2

Subject to number of bays Refer to table Refer to table Yes Orange (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HIGHT L m

WIND LOAD (3)kN

1.41 2.82 4.17 5.62 8.32

30 55 80 120 180

3.4 8.6 13.8 19.0 29.4

0.72 1.44 2.16 2.88 4.32

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware, for FMC-01 dipole (3) v= 150 km/h

Specifications are subject to change without prior notice

40

FMC-02

FM PANEL ANTENNA

FEATURES CIRCULAR POLARIZATION BROADBAND 87.5 ÷ 108 MHz 3.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON SQUARE TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FMC-02 87.5 ÷ 108 MHz 50 ohm 2 x 7/8” EIA 10 kW (5 kW per dipole) ≤ 1.1 (in circular polarization) Circular 3.5 dB (circular polarization) 6.5 dB (circular polarization) Horizontal Component ± 33° Vertical Component ± 28° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

3057 x 2200 x 1133 mm 112 kg 1.3 m2 2.07 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) Directly on supporting mast 2310x2310x1260 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

41

FREQ. (MHz)

FMC-02

FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FMC-02 PANEL ON SQUARE TOWER HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK BROADBAND 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.15 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Circular According to requirement Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

FMC-02/48 (6x8) MONTREAL, QUEBEC, CANADA

Subject to number of bays Refer to table Refer to table Yes Orange (standard) Not supplied As required

Specifications are subject to change without prior notice

42

FMC-02

FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz 0

270

90 10

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10 6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 1

2

4

6

8

2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1.6 0.2 -1 7.3 4.6 3.2 2 10.3 7.6 6.2 5 12 9.3 7.9 6.7 13.3 10.6 9.3 8.1

GAIN TIMES (1)

WEIGHT kG (2)

1.44 1.04 0.79 5.37 2.88 2.09 1.58 10.71 5.75 4.17 3.16 15.85 8.51 6.17 4.68 21.38 11.48 8.51 6.46

260 380 500 260 500 790 1060 500 1060 1520 2070 790 1520 2310 3080 1060 2070 3080 4200

ANTENNA HIGHT L m 2.2

5

10.6

16.2

21.8

WIND LOAD (3)kN 3.76 5.25 6.03 4.14 7.52 10.50 12.06 8.28 15.04 21.00 24.12 12.42 22.56 31.50 36.18 16.56 30.08 42.00 48.24

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

43

FMC-02

FM PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

- UP -

Specifications are subject to change without prior notice

44

FMC-03

FM PANEL ANTENNA

FEATURES CIRCULAR POLARIZATION BROADBAND 87.5 ÷ 108 MHz 4.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON SQUARE TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FMC-03 87.5 ÷ 108 MHz 50 ohm 4 x 7/8” EIA 20 kW(5KW per dipole) ≤ 1.1 (in circular polarization) Circular 4.5 dB(Circular polarization) 7.5 dB(Linear polarization) Horizontal Component: ± 32° Vertical component: ± 32° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

2200 x 2200 x 1017.5 mm 91 kg 0.84 m2 1.1 kN (wind speed at 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (Stainless steel) Internal parts ( Silver plated brass, Polished brass) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast 2310 x2 310 x 600 mm

Specifications are subject to change without prior notice

45

FMC-03

FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FMC-03 PANEL ON SQUARE TOWERS HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK BROAD BAND 87.5รท108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.15 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Circular According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves) Each half can accept full power

FMC-03/24 (6x4) HYMETTOS, GREECE

Subject to number of bays Refer to table Refer to table Yes Gray (standard) Not supplied ssssusupplied As required

Specifications are subject to change without prior notice

46

FMC-03

FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz 0

0

270

90

270

10

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10 6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 1

2

4

6

8

2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1.9 0.4 -0.7 7.6 4.9 3.4 2.4 10.6 7.9 6.4 5.4 12.4 9.8 8.3 7.1 13.8 11.1 9.6 8.6

GAIN TIMES (1) 1.55 1.1 0.85 5.75 3.09 2.19 1.74 11.5 6.16 4.36 3.47 17.38 9.55 6.76 5.13 23.98 12.88 9.12 7.24

90

WEIGHT kG (2) 229 353 488 229 488 764 924 488 924 1392 1853 764 1392 2122 2761 924 1853 2761 3641

ANTENNA HIGHT L m 2.2

5.4

11.8

18.2

24.6

WIND LOAD (3)kN 2.73 3.40 4.07 2.23 5.46 6.79 8.14 4.45 10.92 13.58 16.27 6.68 16.38 20.37 24.41 8.91 21.84 27.16 32.54

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

47

FMC-03

FM PANEL ANTENNA

VERTICAL PATTERN

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt

Specifications are subject to change without prior notice

48

FMC-05

FM PANEL ANTENNA

FEATURES CIRCULAR POLARIZATION BROADBAND 87.5 ÷ 108 MHz 2.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FMC-05 87.5 ÷ 108 MHz 50 ohm 2 x 7/8” EIA 10 kW (5KW per dipole) ≤ 1.15 (in circular polarization) Circular 2.5 dB(Circular polarization) 5.5 dB(Linear polarization) Horizontal Component: ± 38° Vertical component: ± 42° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

2200 x 1800 x 1134 mm 82 kg 0.9 m2 1.28 kN (wind speed at 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (Stainless steel) Internal parts ( Silver plated brass, Polished brass) Radome (Fiberglass) Feed point radome Orange (standard) Directly on supporting mast 2310 x1985 x 1100 mm

FREQ. (MHz)

Specifications are subject to change without prior notice

49

FMC-05

FM PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH FMC-05 PANEL ON TRIANGULAR TOWERS HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK BROAD BAND 87.5รท108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.15 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

Circular According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves) Each half can accept full power FMC-05/18 (6x3) RDP PORTALEGRE, PORTUGAL

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Subject to number of bays Refer to table Refer to table Yes Orange (standard) Not supplied ssssusupplied As required

Specifications are subject to change without prior notice

50

FMC-05

FM PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2 AND 3 FACES AT 98 MHz 0

270

90 10 3 1 dB 180

0

270

90 10 6 3 180

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1)

GAIN TIMES (1)

WEIGHT kG (2)

2 3

- 0.4 - 2.2

0.91 0.60

192 278

1 2 3 1 2 3 1 2 3 1 2 3

5.6 2.6 0.8 8.6 5.6 3.8 10.6 7.6 5.8 11.8 8.8 7.0

3.63 1.82 1.20 7.24 3.63 2.40 11.48 5.75 3.81 15.14 7.59 5.01

192 364 586 364 788 1112 586 1112 1698 788 11526 2264

1

2

4

6

8

ANTENNA HIGHT L m 1.8

4.6

10.2

15.8

21,4

WIND LOAD (3)kN 2.36 2.55 2.58 4.72 5.10 5.16 9.44 10.2 7.74 14.16 15.30 10.32 18.88 20.4

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

(3) v= 150 km/h Specifications are subject to change without prior notice

51

FMC-05

FM PANEL ANTENNA

VERTICAL PATTERN

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt

- UP -

Specifications are subject to change without prior notice

52

FMC-06

FM TOP OR SIDEMOUNT DIPOLE

FEATURES CIRCULAR/ELLIPTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FMC-06

FMC-06/P 87.5 ÷ 108 MHz 50 ohm 7/8” EIA 1-5/8” EIA 7.5 kW 12.5 kW ≤ 1.4 Circular/Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 3 dB with ø 100 pole All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

1550 x 850 x 850 mm 20.5 kg 21.5 kg 2 0.40 m 0.75 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (polished brass, nickel plated brass) Radome (fiberglass) Feed point radome Orange (standard) With special pipe clamps ø 75 ÷ 150 mm 1600x1010x1075 mm

Specifications are subject to change without prior notice

53

FREQ. (MHz)

FMC-06

FM TOP OR SIDEMOUNT DIPOLE

FEATURES RADIATING SYSTEMS WITH FMC-06 DIPOLE OMNIDIRECTIONAL PATTERNS

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค 1.25 in the operating frequency Circular/Elliptical According to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

1.5 4.5 6.2 7.5 9.2

Subject to number of bays Refer to table Refer to table Yes Orange (standard) One clamp for pole, supplied As required

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HIGHT L m

WIND LOAD (3)kN

1.41 2.82 4.17 5.62 8.32

50 105 160 240 360

3.45 8.65 13.85 19.05 29.45

1.51 3.02 4.53 6.04 9.06

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware, for FMC-06 dipole (3) v= 150 km/h

Specifications are subject to change without prior notice

54

VHF Antennas

1VTV-04 C

57

1VTV-04 F

58

1VTV-05 C

59

1VTV-05 F

60

3VTV-02 (Hpol)

61

3VTV-02 (Vpol)

65

3VTV-03

69

3VTV-04

73

3VTV-05

77

3VTV-10

78

3VTV-10A

79

3VTV-11

80

3VTV-15

81

Specifications are subject to change without prior notice

1VTV-04/.C

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BAND I° PANEL 47 ÷ 68 MHz 6.5 dB GAIN DIRECTIONAL PATTERN SUITABLE FOR TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-04/2C 47÷54 MHz (channel 2)

1VTV-04/3C 1VTV-04/4C 54÷61 MHz 61÷68 MHz (channel 3) (channel 4) 50 ohm 2 x 7/8” EIA 2 x 2,5 kW ≤1.15 Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

A B C D

3360 1300 1700 2850 145 2.35

2960 1170 1620 2500 130 2.10

2660 1050 1420 2310 120 1.90

220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast

Specifications are subject to change without prior notice

57

RADIATION PATTERNS (Mid Channel)

1VTV-04/.F

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BAND I° PANEL 54 ÷ 88 MHz 6.5 dB GAIN DIRECTIONAL PATTERN SUITABLE FOR TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-04/2F 1VTV-04/3F 1VTV-04/4F 1VTV-04/5F 1VTV-04/6F 54÷60 MHz 60÷66 MHz 66÷72 MHz 76÷82 MHz 82÷88 MHz (channel 2) (channel 3) (channel 4) (channel 5) (channel 6) 50 ohm 2 x 7/8” EIA 2 x 2,5 kW ≤1.15 Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

A B C D

2960 1170 1620 2500 130 2.10

2660 1050 1420 2310 120 1.90

2470 970 1360 2170 110 1.75

2165 850 1245 2000 100 1.60

2000 810 1170 1900 90 1.55

220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast

Specifications are subject to change without prior notice

58

RADIATION PATTERNS (Mid Channel)

1VTV-05/.C

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BAND I° PANEL 47 ÷ 68 MHz 7.5 dB GAIN DIRECTIONAL PATTERN SUITABLE FOR SQUARE TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-05/2C 47÷54 MHz (channel 2)

1VTV-05/3C 1VTV-05/4C 54÷61 MHz 61÷68 MHz (channel 3) (channel 4) 50 ohm 2 x 7/8” EIA 2 x 2,5 kW ≤1.15 Horizontal 7.5 dB E-Plane ± 35° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

A B C D

3360 1300 1700 2850 145 2.40

2960 2660 1170 1050 1620 1420 2500 2310 130 120 2.15 1.95 220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass, Deoxidized aluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast

Specifications are subject to change without prior notice

59

RADIATION PATTERNS (Mid Channel)

1VTV-05/.F

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BAND I° PANEL 54 ÷ 88 MHz 7.5 dB GAIN DIRECTIONAL PATTERN SUITABLE FOR SQUARE TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA A DIMENSIONS (mm) B C D WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1VTV-05/2F 1VTV-05/3F 1VTV-05/4F 1VTV-05/5F 1VTV-05/6F 54÷60 MHz 60÷66 MHz 66÷72 MHz 76÷82 MHz 82÷88 MHz (channel 2) (channel 3) (channel 4) (channel 5) (channel 6) 50 ohm 2 x 7/8” EIA 2 x 2,5 kW ≤1.15 Horizontal 7.5 dB E-Plane ± 35° H-Plane ± 27° All Metal Parts DC Grounded

2960 1170 1620 2500 130 2.15

2660 1050 1420 2310 120 1.95

2470 2165 970 850 1360 1245 2170 2000 110 100 1.80 1.65 220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast

2000 810 1170 1900 90 1.60

Specifications are subject to change without prior notice

60

RADIATION PATTERNS (Mid Channel)

3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 174 ÷ 230 MHz 8 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS SUITABLE ALSO FOR VERTICAL POLARIZATION

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (kN) 150 Km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

3VTV-02 3VTV-02/E 174 ÷ 230 MHz 50 ohm 7/8” EIA 3 kW ≤1.1

Horizontal 8 dB E-Plane ± 31° H-Plane ± 28° All Metal Parts DC Grounded

VSWR

1300x1300x580mm 1300x1300x532 mm 38 kg 36 kg 0.92 m2 0.75 m2

1.36 kN 1.10 kN 220 km/h Reflector(Hot dip galvanized steel) Dipole(Stainless steel) Internal parts (Silver plated brass) Radome (Fiberglass) Feed point radome (only for 3VTV-02) Orange - White (standard) Directly on supporting mast or tower 1410x1565x750 mm 1340x1340x160mm

GAIN (dB)

Specifications are subject to change without prior notice

61

FREQ. (MHz)

3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

FEATURES RADIATION SYSTEMS WITH 3VTV-02 PANEL HIGH POWER ANTENNA SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL POWER SPLIT RADIO DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.05 in the operating channels Horizontal According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration with two equal halves Each half can accept full power

Subject to number of bays Refer to table Refer to table Yes Orange - White (standard) Not supplied As required

Specifications are subject to change without prior notice

62

3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2, 3 AND 4 FACES AT 200 MHz

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 1 12 2 3 4 1 16 2 3 4

GAIN dB (1) 11 8 6.2 5 14 11 9.2 8 15.9 12.9 11.1 9.9 17 14 12.2 11 18.9 15.9 14.1 12.9 20 17 15.2 14

GAIN TIMES (1) 12.6 6.3 4.2 3.2 25.1 12.6 8.3 6.3 38.9 19.5 12.8 9.8 50.1 25.1 16.6 12.6 77.6 38.9 25.7 19.5 100 50.1 33.1 25.1

WEIGHT kg (2a) 85 170 250 340 170 340 525 750 250 525 850 1075 340 750 1075 1400 500 1050 1700 2150 680 1500 2150 2800

WEIGHT kg (2b) 81 162 238 324 166 324 501 718 238 501 814 1027 324 718 1027 1336 476 1002 1628 2054 648 1436 2102 2672

ANTENNA HEIGHT L m 2.9

6.1

9.3

12.5

18.9

25.3

WIND LOAD (3a) kN 2.73 4.60 5.98 7.35 5.46 9.12 11.96 14.70 8.20 13.81 17.94 22.05 10.98 18.42 23.92 29.40 16.40 27.63 35.83 44.10 21.87 36.84 47.84 58.80

WIND LOAD (3b) kN 2.21 3.56 4.42 5.27 4.42 7.04 8.84 10.54 6.64 10.69 13.26 15.81 8.9 14.26 17.68 21.08 13.28 21.39 26.47 31.62 17.71 28.52 35.36 42.16

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2a) for 3vtv-02 and without mounting hardware.

(2b) for 3vtv-02/E and without mounting hardware.

(3a) for 3vtv-02 (v= 150 km/h) Specifications are subject to change without prior notice (3b) for 3vtv-02/E (v= 150 km/h)

63

Picture refers to 3VTV-02 panel antenna

3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

VERTICAL PATTERN

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt

- UP -

Picture refers to 3VTV-02 panel antenna

Specifications are subject to change without prior notice

64

3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 174 ÷ 230 MHz 8 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS SUITABLE ALSO FOR HORIZONTAL POLARIZATION

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (kN) 150 Km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

3VTV-02 3VTV-02/E 174 ÷ 230 MHz 50 ohm 7/8” EIA 3 kW

RADIATION PATTERNS (Mid Band)

≤1.1

Vertical 8 dB E-Plane ± 31° H-Plane ± 28° All Metal Parts DC Grounded

1300x1300x580mm 1300x1300x532 mm 38 kg 36 kg 0.92 m2 0.75 m2 1.36 kN 1.10 kN 220 km/h Reflector(Hot dip galvanized steel) Dipole(Stainless steel) Internal parts (Silver plated brass) Radome (Fiberglass) Feed point radome (only for 3VTV-02) Orange - White (standard) Directly on supporting mast or tower 1410x1565x750 mm 1340x1340x160 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

65

FREQ. (MHz)

3VTV-02(Vertical polarization) VHF PANEL ANTENNA

FEATURES RADIATION SYSTEMS WITH 3VTV-02 PANEL HIGH POWER ANTENNA SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERNS EQUAL OR UNEQUAL POWER SPLIT RADIO DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.05 in the operating channels Horizontal According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration with two equal halves Each half can accept full power

Subject to number of bays Refer to table Refer to table Yes Orange - White (standard) Not supplied As required

Specifications are subject to change without prior notice

66

3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2, 3 AND 4 FACES AT 200 MHz

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 1 12 2 3 4 1 16 2 3 4

GAIN dB (1) 10.7 7.8 5.8 4.8 13.7 10.8 8.8 7.8 15.5 12.6 10.6 9.6 16.6 13.6 11.8 10.7 18.4 15.5 13.8 12.6 19.5 16.6 14.8 13.7

GAIN TIMES (1) 11.7 6 3.8 3 23.4 12 7.6 6 35.5 18.2 11.5 9.1 45.7 22.9 15.1 11.7 69.2 35.5 24 18.2 89.1 45.7 30.2 23.4

WEIGHT kg (2a) 85 170 250 340 170 340 525 750 250 525 850 1075 340 750 1075 1400 500 1050 1700 2150 680 1500 2150 2800

WEIGHT kg (2b) 81 162 238 324 166 324 501 718 238 501 814 1027 324 718 1027 1336 476 1002 1628 2054 648 1436 2102 2672

WIND ANTENNA HEIGHT L LOAD m (3a) kN 2.73 4.60 2.9 5.98 7.35 5.46 9.12 6.1 11.96 14.70 8.20 13.81 9.3 17.94 22.05 10.98 18.42 12.5 23.92 29.40 16.40 27.63 18.9 35.83 44.10 21.87 36.84 25.3 47.84 58.80

WIND LOAD (3b) kN 2.21 3.56 4.42 5.27 4.42 7.04 8.84 10.54 6.64 10.69 13.26 15.81 8.9 14.26 17.68 21.08 13.28 21.39 26.47 31.62 17.71 28.52 35.36 42.16

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2a) for 3VTV-02 and without mounting hardware.

(2b) for 3VTV-02/E and without mounting hardware.

(3a) for 3vtv-02 (v= 150 km/h) Specifications are subject to change without prior notice (3b) for 3vtv-02/E (v= 150 km/h)

67

Picture refers to 3VTV-02 panel antenna

3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

VERTICAL PATTERN

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2

4 BAYS

0.1 0.0

-2

0

2

4

8

6

10 12 14 16 18 20

22 24 26

1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2

8 BAYS

0.1 0.0

-2 -1

0

1

2

3

4 5

6

7

8

9

10 11 12 13 14

1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2

12 BAYS

0.1 0.0

-2 -1

0

1

2

3

4 5

6

7

8

9

10 11 12 13 14

1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2

16 BAYS

0.1 0.0

-2 -1

0

1

Specifications are subject to change without prior notice

68

2

3

4 5

6

7

8

9

10 11 12 13 14

3VTV-03

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 174 ÷ 230 MHz 7 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

3VTV-03 174 ÷ 230 MHz 50 ohm 7/8”EIA, 7/16 F 3 kW (7/8”), 2.5 kW (7/16 F) ≤ 1.2 in the operating channel Horizontal 7 dB E-Plane ± 40° H-Plane ± 28° All Metal Parts DC Grounded

1300 x 850 x 729 mm 41 kg 0.79 m2 1.22 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (Stainless steel) Internal parts (Silver plated brass) Radome (Fiberglass) Feed point radome Orange (standard) Directly on supporting mast 1565 x 960 x 800 mm

GAIN (dB)

FREQ. (MHz)

Specifications are subject to change without prior notice

69

3VTV-03

VHF PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH 3VTV-03 PANEL HIGH POWER ANTENNA SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERN EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.05 in the operating channel Horizontal According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Orange - White (standard) Not supplied As required

Specifications are subject to change without prior notice

70

3VTV-03

VHF PANEL ANTENNA

HORIZONTAL PATTERN WITH OFFSET 2 AND 3 FACES AT 200 MHz

TECHNICAL DATA NUMBER PANELS OF PER BAY BAY 1 2 2 3 1 2 4 3 1 2 6 3 1 2 8 3 1 2 12 3 1 2 16 3

GAIN dB (1) 10 7 5.2 13 10 8.2 14.9 11.9 10.1 16 13 11.2 17.9 14.9 13.1 19 16 14.2

GAIN TIMES (1) 10 5 3.3 20 10 6.6 30.9 15.5 10.2 40 20 13.2 61.6 30.9 20.4 80 40 26.3

WEIGHT kg (2) 80 160 230 160 310 500 230 500 800 310 680 1000 500 1000 1600 680 1400 2000

ANTENNA HEIGHT L M 2.9

6.1

9.3

12.5

18.9

25.3

WIND LOAD (3) KN 2.34 3.50 4.94 4.68 7.00 9.88 7.02 10.50 14.82 9.36 14.00 19.76 14.04 21.00 29.64 18.72 28.00 39.50

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

Specifications are subject to change without prior notice

71

3VTV-03

VHF PANEL ANTENNA

VERTICAL PATTERNS

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt

- UP -

Specifications are subject to change without prior notice

72

3VTV-04

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 174 ÷ 230 MHz 11 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

3VTV-04 174 ÷ 230 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.1 Horizontal 11 dB E-Plane ± 31° H-Plane ± 13° All Metal Parts DC Grounded

VSWR

2800 x 1300 x 547 mm 80 kg 1.89 m2 2.79 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (Stainless steel) Internal parts (Silver plated brass) Radome (Fiberglass) Feed point radome Orange-White (standard) Directly on supporting mast or tower 2910 x 1625 x 720 mm

GAIN (dB)

FREQ. (MHz)

FREQ. (MHz)

Specifications are subject to change without prior notice

73

3VTV-04

VHF PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH 3VTV-04 PANEL HIGH POWER ANTENNA SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERN EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.05 in the operating channels Horizontal According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

3VTV-04/16 (4x4) in TURKEY

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE SHIPPING

Subject to number of bays Refer to table Refer to table Yes Orange - White (standard) Not supplied As required

Specifications are subject to change without prior notice

74

3VTV-04

VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2,3 AND 4 FACES AT 200 MHz 0

0

270

270

90 10

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10 6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS OF PER BAY BAY 1 2 1 3 4 1 2 2 3 4 1 2 4 3 4 1 2 6 3 4 1 2 8 3 4

GAIN dB (1) 11 8 6.2 5 14 11 9.2 8 17 14 12.3 11 18.9 15.9 14 12.9 20 17 15.3 14

GAIN TIMES (1) 12.6 6.3 4.2 3.2 25.1 12.6 8.3 6.3 50.1 25.1 16.9 12.6 77.6 38.9 25.1 19.5 100 50.1 33.9 25.1

90

WEIGHT kg (2) 80 170 260 340 170 340 500 680 340 680 1050 1500 500 1050 1700 2150 680 1500 2150 2800

ANTENNA HEIGHT L M 2.8

6

12.4

18.8

25.2

WIND LOAD (3) KN 2.79 4.70 6.10 7.50 5.58 9.40 12.20 15.00 11.16 18.80 24.40 30.00 16.74 28.20 36.60 45.00 22.32 37.60 48.80 60.00

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

(3) v= 150 km/h Specifications are subject to change without prior notice

75

3VTV-04

VHF PANEL ANTENNA

VERTICAL PATTERNS

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt

Specifications are subject to change without prior notice

76

3VTV-05

VHF LOG. PERIODIC ANTENNA

FEATURES HORIZONTAL OR VERTICAL POLARIZATION BROADBAND 174 ÷ 230 MHz 8.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

3VTV-05 174 ÷ 230 MHz 50 ohm NF 0.5 kW ≤ 1.2 Horizontal or Vertical 8.5 dB E-Plane ± 26° H-Plane ± 33° All Metal Parts DC Grounded

VSWR

2400 x 862 x 200 mm 30 kg 0.28 m2 30 kg (wind speed 150 km/h) 220 km/h External(Galvanized steel) Internal (Silver plated aluminium, noryl) Radome (Fiberglass) Feed point radome Orange (standard) Special pipe clamps (not supplied) 2600 x 1050 x 250 mm

GAIN (dB)

Specifications are subject to change without prior notice

77

FREQ. (MHz)

FREQ. (MHz)

3VTV-10

VHF (BIII) / DAB YAGI ANTENNA

FEATURES HORIZONTAL OR VERTICAL POLARIZATION BANDWIDTH 198 ÷ 223 MHz 4.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

D: 448 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

3VTV-10 198 ÷ 223 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.15 Vertical or Horizontal 4.5 dB E-Plane ± 33° H-Plane ± 62° All Metal Parts DC Grounded VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

898 x 820 x 160 mm 9 kg 0.08 m2 0.10 kN (wind speed 150 km/h) 220 km/h External parts (Stainless steel) Internal parts (Silver plated brass, Polished brass,Deoxidizedaluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast 1120 x 360 x 1170 mm

FREQ. (MHz)

Specifications are subject to change without prior notice

78

3VTV-10/A

VHF (BIII) / DAB YAGI ANTENNA

FEATURES HORIZONTAL OR VERTICAL POLARIZATION BANDWIDTH 174 ÷ 181 MHz 4.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

D: 448 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

3VTV-10/A 174 ÷ 181 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.2 Vertical or Horizontal 4.5 dB E-Plane ± 33° H-Plane ± 62° All Metal Parts DC Grounded VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

898 x 820 x 160 mm 10 kg 0.08 m2 0.10 kN (wind speed 150 km/h) 220 km/h External parts (Stainless steel) Internal parts (Silver plated brass, Polished brass,Deoxidizedaluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast 1120 x 360 x 1170 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

79

3VTV-11

VHF (BIII) / DAB DIPOLE ANTENNA

FEATURES VERTICAL POLARIZATION BANDWIDTH 217.5 ÷ 230 MHz 2 dB GAIN SUITABLE FOR VARIOUS PATTERNS STAINLESS STEEL

D: 450 ÷ 600 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR PACKING

3VTV-11 217.5 ÷ 230 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.25 Vertical 2 dB (D=450mm) All Metal Parts DC Grounded

946 x 605 x 180 mm 9.5 kg 0.114 m2 0.16 kN (wind speed 150 km/h) 220 km/h External parts (Stainless steel) Internal parts (Silver plated brass, Polished brass,Deoxidizedaluminium) Radome (Fiberglass) Feed point radome Gray (standard) 1150 x 350 x 925 mm

VSWR

FREQ. (MHz)

Specifications are subject to change without prior notice

80

3VTV-15

VHF (BIII) / DAB YAGI ANTENNA

FEATURES HORIZONTAL OR VERTICAL POLARIZATION BANDWIDTH 215 ÷ 230 MHz 4.5 dB GAIN DIRECTIONAL PATTERN STAINLESS STEEL

D: 448 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

3VTV-15 215 ÷ 230 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.15 Vertical or Horizontal 4.5 dB E-Plane ± 34° H-Plane ± 60° All Metal Parts DC Grounded

0

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

898 x 820 x 160 mm 9 kg 0.08 m2 0.10 kN (wind speed 150 km/h) 220 km/h External parts (Stainless steel) Internal parts (Silver plated brass, Polished brass,Deoxidizedaluminium) Radome (Fiberglass) Feed point radome Gray (standard) Directly on supporting mast 1120 x 360 x 1170 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

81

UHF Antennas

UTV-01/05

85

UTV-02

89

UTV-02/LB

93

UTV-12/LB

94

UTV-12/MB

95

UTV-12/HB

96

UTV-11

97

UTV-14/X

98

UTV-14/X/2

99

UTV-15/X

100

UTV-15/X/2

101

UTV-07 / UTV-08

102

UTVC-01

103

UTV-01/UTV-05

UHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 470 ÷ 860 MHz 12 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

UTV-01

UTV-01/E UTV-05 470 ÷ 860 MHz 50 ohm NF or 7/16 F or 7/8” EIA 2 x 7/8” EIA 250 W (NF), 1.5 kW (7/16 F) 2 x 2.5 kW 2.5 kW (7/8” EIA) ≤ 1.15 ≤ 1.1 Horizontal 12 dB E-Plane ± 32° H-Plane ± 12° All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

VSWR

1000 x 450 x 280.5 mm (7/8” EIA) 15.4 kg 12.0 kg 16 kg 2 0.45 m 0.62 kN (wind speed 150 km/h) 220 km/h Reflector: stainless steel for UTV-01 and UTV-05, Alumnium (passivation SURTEC 650) for UTV-01/E Internal parts : brass and copper for UTV-01/E plated brass and copper for UTV-01/05 Radome (fiberglass) Full radome Int. Orange-White-Green (standard) Directly on supporting mast or with special pipe clamps 1030 x 480 x 330 mm

FREQ. (MHz) GAIN (dB)

FREQ. (MHz)

Specifications are subject to change without prior notice

85

UTV-01/UTV-05

UHF PANEL ANTENNA

FEATURES RADIATING SYSTEMS WITH UTV-01/UTV-05 PANELS VERY HIGH POWER SYSTEMS OMNIDIRECTIONAL OR DIRECTIONAL PATTERN EQUAL OR UNEQUAL SPLIT RATIO POWER DISTRIBUTION NETWORK

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE G.R.P. CYLINDER COLOUR MOUNTING HARDWARE SHIPPING

470 รท 860 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.05 in the operating channels Horizontal According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves).

Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Int. Orange - White (optional) Not supplied As required

Specifications are subject to change without prior notice

86

UTV-01/UTV-05

UHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2,3 AND 4 FACES AT 650 MHz

TECHNICAL DATA NUMBER PANELS OF PER BAY BAY 1 2 2 3 4 1 2 4 3 4 1 2 6 3 4 1 2 8 3 4 1 2 10 3 4 1 2 12 3 4 1 2 16 3 4

GAIN dB (1) 15.1 12.2 10.3 9.1 18.3 15.3 13.5 12.3 20 17 15.3 14 21.3 18.3 16.6 15.3 22.3 19.3 17.6 16.3 23 20.1 18.3 17.1 24.3 21.3 19.6 18.4

GAIN TIMES (1) 32.8 16.6 10.9 8.2 68.1 34 22.6 17 101.2 50.6 33.7 25.3 136.4 68.2 45.4 34.1 172 86.1 57.3 43 204 102 68 51 273.2 136.6 91 68.3

WEIGHT kg (2) 44.2 118 163.5 216.9 118 216.9 329.3 457.1 163.5 329.3 504 541.9 216.9 457.1 541.9 735.1 273.1 546 810 1092 379.3 641.9 1110 1350 560 835.1 1184 1570

ANTENNA HEIGHT L M 2.15

4.45

6.75

9.05

11.35

13.65

18.25

WIND LOAD (3) KN 1.74 3.82 4.73 4.6 3.59 7.9 9.39 9.12 5.53 12 14.21 13.81 7.31 16.06 19.05 18.5 9.16 18.54 23.86 23.17 11.03 24.21 28.1 28.2 14.73 32.33 37.92 38.82

WIND LOAD (4) KN 4.98 7.06 7.97 7.84 6.83 11.14 12.63 12.36 8.77 15.24 17.45 17.05 10.55 19.3 22.29 21.74 12.4 21.78 27.1 26.41 14.27 27.45 31.34 31.44 17.97 35.57 41.16 42.06

(1) referred to half wave dipole.Attenuation of connecting cables not taken into account.

(2) without mounting hardware,(for UTV-01).

(3) Without top mast, v= 150 km/h (4) With top mast, v= 150 km/h Specifications are subject to change without prior notice

87

UTV-01/UTV-05

UHF PANEL ANTENNA

VERTICAL PATTERNS

DIMENSIONAL DETAILS

Without null fill

UTV-01

- UP -

With null fill and beam tilt

UTV-05

Specifications are subject to change without prior notice

88

UTV-02

UHF PANEL ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 470 ÷ 860 MHz 10.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

UTV-02 470 ÷ 860 MHz 50 ohm 7/16 F or 7/8”EIA 1.5 kW (7/16 F) , 2.5 kW (7/8” EIA) ≤ 1.1 Vertical 10.5 dB E-Plane ± 15° H-Plane ± 32° All Metal Parts DC Grounded

0

0

10

10

6

6

3 1 dB

3 1 dB

H-Plane

759 x 460 x 228 mm (7/16 F) 759 x 460 x 240.5 mm (7/8”EIA) 12.5 kg 0.35 m2 0.48 kN (wind speed 150 km/h) 220 km/h Reflector (Stainless steel) Dipoles (Plated copper) Internal parts (Silver plated brass, silver plated beryllium) Radome (Fiberglass) Full radome Int. Orange - White - Green (standard) Directly on supporting mast or with special pipe clamps 780 x 480 x 290 mm

90

90 270

270

E-Plane

FREQ. (MHz)

GAIN (dB)

FREQ. (MHz)

Specifications are subject to change without prior notice

89

UTV-02

UHF PANEL ANTENNA

FEATURES RADIATION SYSTEMS WITH UTV-02 PANELS OMNIDIRECTIONAL OR DIRECTIONAL PATTERN EQUAL OR UNEQUAL POWER SPLIT RATIO DISTRIBUTION NETWORK VERY HIGH POWER SYSTEMS BROADBAND 470 รท 860 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE G.R.P. CYLINDER COLOUR MOUNTING HARDWARE SHIPPING

470 รท 860 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ ค1.05 in the operating channels Vertical According to requirement Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration with two equal halves Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Int. Orange / White (optional) Not supplied As required

Specifications are subject to change without prior notice

90

UTV-02

UHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2,3 AND 4 FACES AT 650 MHz 0

0

270

TECHNICAL DATA NUMBER PANELS OF PER BAY BAY 1 2 2 3 4 1 2 4 3 4 1 2 6 3 4 1 2 8 3 4 1 2 10 3 4 1 2 12 3 4 1 2 16 3 4

GAIN dB (1) 13 10 8.2 7 16 13 11.2 10 17.8 14.8 13 11.8 19 16 14.2 13 20 17 15.8 14 20.8 17.8 16 14.8 22 19 17.2 16

GAIN TIMES (1) 19.9 10 6.6 5 38.8 19.9 13.2 10 60 30.2 19.9 15.1 79.4 39.8 26.4 19.9 100 50 38 25.1 120.2 60.2 39.8 30.2 158.5 136.6 52.5 68.3

90

270

90

10

10

6 3 1 dB

6 3 1 dB

180

180

WEIGHT kg (2) 38.4 106.4 146.1 193.7 106.4 193.7 294.5 410.7 146.1 294.5 451.8 472.3 193.7 410.7 472.3 642.3 244.1 488 723 976 344.5 572.3 1005.6 1210.8 513.6 742.3 1044.8 1384.4

ANTENNA HEIGHT L M 1.55

3.15

4.75

6.35

7.95

9.55

12.75

WIND LOAD (3) KN 1.24 2.77 3.30 3.14 2.53 5.62 6.70 6.38 3.83 8.48 10.09 9.61 5.14 11.32 13.48 12.84 6.41 14.19 16.88 16.08 7.21 17.06 20.28 19.31 10.29 22.76 27.07 25.78

WIND LOAD (4) KN 4.48 6.01 6.54 6.38 5.77 8.86 9.94 9.62 7.07 11.72 13.33 12.85 8.38 14.56 16.72 16.08 9.65 17.43 20.12 19.32 10.45 20.30 23.52 22.55 13.53 26 30.31 29.02

(1) referred to half wave dipole. Attenuation of connecting cables not taken into account.

(2) without mounting hardware.

(3) Without top mast, v= 150 km/h Specifications are subject to change without prior notice (4) With top mast, v= 150 km/h

91

0

270

90 10 6 3 1 dB 180

UTV-02

UHF PANEL ANTENNA

VERTICAL PATTERNS

DIMENSIONAL DETAILS

Without null fill With null fill and beam tilt

- UP -

Specifications are subject to change without prior notice

92

UTV-02/LB

UHF PANEL ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 470 ÷ 702 MHz 11 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

UTV-02/LB 470 ÷ 702 MHz 50 ohm 7/8” EIA or 7/16 F 1.5kW (7/16 F), 2.5kW (7/8”EIA) ≤ 1.1 Vertical 11 dB E-Plane : ± 14° H-Plane: ± 30° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Channel)

1000 x 450 x 280 mm 15.4 kg 0.45 m2 0.62 kN (wind speed at 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (Plated copper) Internal parts ( Silver plated brass, Silver plated beryllium) Radome (Fiberglass) Full radome Red - white - green (standard) Directly on supporting mast or with speccial pipe clamps 1030 x 480 x 330 mm

FREQ. (MHz)

FREQ. (MHz)

Specifications are subject to change without prior notice

93

UTV-12/LB

UHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 470 ÷ 670 MHz 13 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN PENTAGONAL TOWER WITH SUITABLE PLATES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH

LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

UTV-12/LB 470 ÷ 670 MHz 50 ohm 7/8” EIA 2.5 kW ≤ 1.1 Horizontal 13 dB E-Plane ± 26° H-Plane ± 12° All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

1000 x 450 x 280 mm 15.4 kg 0.44 m2 0.61 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (plated copper) Internal parts (silver plated brass, silver plated beryllium) Radome (fiberglass) Full radome Red - white - green (standard) Directly on supporting mast 1030 x 480 x 330 mm

Specifications are subject to change without prior notice

94

UTV-12/MB

UHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 574 ÷ 758 MHz 13 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN PENTAGONAL TOWER

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH

UTV-12/MB 574 ÷ 758 MHz 50 ohm 7/8” EIA 2.5 kW ≤ 1.1 Horizontal 13 dB E-Plane ± 26° H-Plane ± 12° All metal parts DC grounded

LIGHTNING PROTECTION

0

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

E-Plane

H-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

992 x 440 x 237 mm 14 kg 0.44 m2 0.61 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (plated copper) Internal parts (silver plated brass, silver plated beryllium) Radome (fiberglass) Full radome Red - white - green (standard) Directly on supporting mast 1030 x 480 x 330 mm

FREQ. (MHz) GAIN (dB)

FREQ. (MHz)

Specifications are subject to change without prior notice

95

UTV-12/HB

UHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 662 ÷ 862 MHz 13 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN PENTAGONAL TOWER

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH

UTV-12/HB 662 ÷ 862 MHz 50 ohm 7/8” EIA 2.5 kW ≤ 1.1 Horizontal 13 dB E-Plane ± 26° H-Plane ± 12° All metal parts DC grounded

LIGHTNING PROTECTION

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

992 x 440 x 237 mm 14 kg 0.44 m2 0.61 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (plated copper) Internal parts (silver plated brass, silver plated beryllium) Radome (fiberglass) Full radome Red - white - green (standard) Directly on supporting mast 1030 x 480 x 330 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

96

UTV-11

UHF SUPERTURNSTILE ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 470 ÷ 860 MHz OMNIDIRECTIONAL PATTERN SELF SUPPORTING RADOME

ELECTRICAL DATA

ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTION

NUMBER OF BAYS

1 2 4 UTV-11/1 UTV-11/2 UTV-11/4 470 ÷ 860 MHz 50 ohm 7/8” EIA 1-5/8” EIA 2 kW 5 kW ≤ 1.1 (in the frequency range) Horizontal 5 dB 8 dB 11 dB All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

MECHANICAL DATA

DIAMETER ANTENNA HEIGHT “L” WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MAX WIND VELOCITY MATERIALS ICING PROTECTION RADOME COLOUR MOUNTING

NUMBER OF BAYS 2 4 362 mm 2900 mm 5100 mm 105 kg 150 kg 1.05 m2 1.85 m2 0.85 kN 1.50 kN 220 km/h Fiberglass cylinder as self supporting structure Full radome Grey Directly on top of existing mast by means of a flange

1

1500 mm 65 kg 0.54 m2

0.45 kN

Specifications are subject to change without prior notice

97

V-Plane 2 bays

4 bays

UTV-14/X

UHF (DVB-H) OMNI ANTENNA

PATENT PENDING (MI2006A 000499)

FEATURES

See table

VERTICAL POLARIZATION BROADBAND 7 dB GAIN OMNIDIRECTIONAL PATTERN

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE OPERATING CHANNELS IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAM WIDTH ELECTRICAL DOWNTILT LIGHTNING PROTECTION

UTV-14/C UTV-14/D UTV-14/B UTV-14/A 470 ÷ 550 MHz 550 ÷ 638 MHz 638 ÷ 742 MHz 742 ÷ 860 MHz ch. 31 ÷ 41 ch. 42 ÷ 54 ch. 55 ÷ 69 ch. 21 ÷ 30 50 ohm 7/16 F 500 W ≤ 1.4 Vertical 7 dB E-Plane ± 5° 0° The metal parts of the antenna,including the inner conductor, are DC grounded.From the solid metal tip right down to the base,the grounding cross-section is 90 mm2 aluminium or more.

0

270

90

6 3 1 dB 180

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MATERIALS ICING PROTECTION RADOME COLOUR MOUNTING PACKING

H-Plane

3410 x ø82 19 kg 0.28 m2 300 N

2995 x ø82 18 kg 0.25 m2 260 N

2575 x ø82 17 kg 0.21 m2 225 N

2260 x ø82 16 kg 0.19 m2 197 N

Internal parts (Brass,Aluminium,Teflon) Radome (Fiberglass) Full radome Gray On pole ø 60 ÷ 120 mm 3935x190x190mm

3520x190x190mm

3100x190x190mm

2790x190x190mm

Specifications are subject to change without prior notice

98

0

90

270 10

1 dB 180

E-Plane

UTV-14/X/2

UHF (DVB-H) OMNI ANTENNA

PATENT PENDING (MI2006A 000499)

FEATURES

See table

VERTICAL POLARIZATION BROADBAND 7 dB GAIN OMNIDIRECTIONAL PATTERN

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE OPERATING CHANNELS IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAM WIDTH ELECTRICAL DOWNTILT LIGHTNING PROTECTION

UTV-14/C/2 UTV-14/D/2 UTV-14/B/2 UTV-14/A/2 470 ÷ 550 MHz 550 ÷ 638 MHz 638 ÷ 742 MHz 742 ÷ 860 MHz ch. 31 ÷ 41 ch. 42 ÷ 54 ch. 55 ÷ 69 ch. 21 ÷ 30 50 ohm 7/16 F 500 W ≤ 1.4 Vertical 7 dB E-Plane ± 5° 2° The metal parts of the antenna,including the inner conductor, are DC grounded.From the solid metal tip right down to the base,the grounding cross-section is 90 mm2 aluminium or more.

0

270

90 10 6 1 dB 180

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MATERIALS ICING PROTECTION RADOME COLOUR MOUNTING PACKING

H-Plane

3410 x ø82 mm 2995 x ø82 mm 2575 x ø82 mm 2260 x ø82 mm 19 kg 18 kg 17 kg 16 kg 2 2 2 0.28 m 0.25 m 0.21 m 0.19 m2 300 N 260 N 225 N 197 N Internal parts (Brass,Aluminium,Teflon) Radome (Fiberglass) Full radome Grey On pole ø 60 ÷ 120 mm 3935x190x190mm

3520x190x190mm

3100x190x190mm

2790x190x190mm

Specifications are subject to change without prior notice

99

0

90

270

6 3 1 dB 180

E-Plane

UTV-15/X

UHF (DVB-H) OMNI ANTENNA

FEATURES

PATENT PENDING (MI2006A 000499)

See table

VERTICAL POLARIZATION BROADBAND 8 dB GAIN OMNIDIRECTIONAL PATTERN

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE OPERATING CHANNELS IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAM WIDTH ELECTRICAL DOWNTILT LIGHTNING PROTECTION

UTV-15/C UTV-15/D UTV-15/B UTV-15/A 470 ÷ 550 MHz 550 ÷ 638 MHz 638 ÷ 742 MHz 742 ÷ 860 MHz ch. 31 ÷ 41 ch. 42 ÷ 54 ch. 55 ÷ 69 ch. 21 ÷ 30 50 ohm 7/16 F 500 W ≤ 1.4 Vertical 8 dB E-Plane ± 3.5° 0° The metal parts of the antenna,including the inner conductor, are DC grounded.From the solid metal tip right down to the base,the grounding cross-section is 90 mm2 aluminium or more.

RADIATION PATTERNS (Tipical) 0

270

90 10 6 3 1 dB 180

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MATERIALS ICING PROTECTION RADOME COLOUR MOUNTING PACKING

H-Plane

4492 x ø82mm 3927 x ø82mm 3377 x ø82mm 2962 x ø82mm 23 kg 21 kg 19 kg 17 kg 2 2 2 0.37 m 0.32 m 0.28 m 0.24 m2 392 N 343 N 295 N 258 N Internal parts (Brass,Aluminium,Teflon) Radome (Fiberglass) Full radome Grey On pole ø 60 ÷ 120 mm 4915x190x190mm

4350x190x190mm

3835x190x190mm

100

3400x190x190mm

0

90 10 6 3 1 dB 180

E-Plane

UTV-15/X/2

UHF (DVB-H) OMNI ANTENNA

PATENT PENDING (MI2006A 000499)

FEATURES

See table

VERTICAL POLARIZATION BROADBAND 8 dB GAIN OMNIDIRECTIONAL PATTERN

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE OPERATING CHANNELS IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAM WIDTH ELECTRICAL DOWNTILT LIGHTNING PROTECTION

UTV-15/C/2 UTV-15/D/2 UTV-15/B/2 UTV-15/A/2 470 ÷ 550 MHz 550 ÷ 638 MHz 638 ÷ 742 MHz 742 ÷ 860 MHz ch. 31 ÷ 41 ch. 42 ÷ 54 ch. 55 ÷ 69 ch. 21 ÷ 30 50 ohm 7/16 F 500 W ≤ 1.4 Vertical 8 dB E-Plane ± 3.5° 2° The metal parts of the antenna,including the inner conductor, are DC grounded.From the solid metal tip right down to the base,the grounding cross-section is 90 mm2 aluminium or more.

RADIATION PATTERNS (Tipical)

270

90 10 6 3 180

H-Plane

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MATERIALS ICING PROTECTION RADOME COLOUR MOUNTING PACKING

4492 x ø82 mm 3927 x ø82 mm 3377 x ø82 mm 2952 x ø82 mm 23 kg 21 kg 19 kg 17 kg 2 2 2 0.37 m 0.32 m 0.28 m 0.24 m2 392 N 343 N 295 N 258 N Internal parts (Brass,Aluminium,Teflon) Radome (Fiberglass) Full radome Grey On pole ø 60 ÷ 120 mm 4915x190x190mm

4350x190x190mm

3835x190x190mm

101

3400x190x190mm

0

90

270 10 6 3 180

E-Plane

UTV-07/UTV-08

UHF PANEL ANTENNA

FEATURES HORIZONTAL OR VERTICAL POLARIZATION BROADBAND 470 ÷ 860 MHz 14 dB GAIN DIRECTIONAL PATTERN WITH ULTRA NARROW BEAM AND VERY LOW SIDE/BACK LOBES DESIGNED TO SOLVE CO-CHANNEL INTERFERENCE PROBLEMS ON TRANSPOSERS SITES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

UTV-07 UTV-08 470 ÷ 860 MHz 50 ohm 7/8” EIA 0.5 kW ≤ 1.5 HORIZONTAL VERTICAL 14 dB E-Plane ± 7° E-Plane ± 32° H-Plane ± 32° H-Plane ± 7° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band)

VSWR

2390x450x243 mm 56 kg 1.07 m2 1.48 kN (wind speed 150 km/h) 220 km/h Reflector (aluminium) Internal parts (Plated brass and copper) Radome (Fiberglass) Full radome Green (standard) Directly on supporting mast or with pipe clamps ø 60 ÷ 115 mm (optional) 2430x475x310 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

102

FREQ. (MHz)

UTVC-01

UHF PANEL ANTENNA

FEATURES DUAL POLARIZATION BROADBAND 470 ÷ 558 MHz 11 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH

UTVC-01 470 ÷ 558 MHz 50 ohm 2 x 7/8” EIA 2 x 2.5 kW ≤ 1.18 Horizontal and Vertical 11 dB Horizontal-Plane ± 31° Vertical-Plane ± 16° 27 dB All metal parts of the antenna are DC grounded.

The inner conductor is coupled capacitively.

ISOLATION LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band) HORIZONTAL POLARIZATION 0

0

90

270 10

10

6

6

1 dB

1 dB

Vertical-Plane

1133 x 694 x 275 mm 24 kg 0.8 m2 1.1 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Internal parts (plated brass) Radome (fiberglass) Full radome Red - white - green (standard) Directly on supporting mast or with special pipe clamps 1150 x 730 x 300 mm

90

270

Horizontal-Plane

VERTICAL POLARIZATION 0

0

90

270

90

270

10 6 1 dB

Vertical-Plane

Specifications are subject to change without prior notice

103

3 1 dB

Horizontal-Plane

Special Antennas

BPFM-03

107

BPFM-05/5F

108

BPFM-05/6F

109

FM-03/P

110

FM-05H/P

111

FM-05V/P

112

FM-01/S

113

FMC-06/SP

114

FMC-06/SP1

115

3VTV-02/EB

116

3VTV-04/EB

117

BPFM-03

VHF (B.I) - FM PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 76 ÷ 108 MHz 7.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON SQUARE TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

BPFM-03 76 ÷ 108 MHz 50 ohm 7/8” EIA 5 kW ≤1.15 Horizontal 7.5 dB E-Plane ± 34° H-Plane ± 28° All Metal Parts DC Grounded

0

0

90

270 10

10

6

6

3 1 dB

3 1 dB

180

H-Plane

2650x1800x1110 mm 100 kg 1.32 m2 3.24 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Radome (Fiberglass) Feed point radome Orange (standard) Directly on supporting mast or with pipe clamps (not supllied) 2760x1910x550 mm

180

E-Plane

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

107

90

270

FREQ. (MHz)

BPFM-05/5F

VHF (B.I) - FM PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 76 ÷ 101 MHz 6.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

BPFM-05/5F 76 ÷ 101 MHz 50 ohm 7/8” EIA 5 kW ≤1.15 (76÷82 MHz) ≤1.20 (82÷101 MHz) Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 28° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band) 0

0

270

270

90

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR (dB)

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

2650x1800x1110 mm 118 kg 1.36 m2 2.05 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Radome (Fiberglass) Feed point radome Orange (standard) Directly on supporting mast or 2760x1910x550 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

108

FREQ. (MHz)

BPFM-05/6F

VHF (B.I) - FM PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 82 ÷ 103 MHz 6.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

RADIATION PATTERNS (Mid Band)

BPFM-05/6F 82 ÷ 103 MHz 50 ohm 7/8” EIA 5 kW ≤1.15 Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 28° All Metal Parts DC Grounded

0

0

90

270 10

10

6

6

3 1 dB

3 1 dB

180

H-Plane

2650x1800x1110 mm 117 kg 1.36 m2 2.05 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Radome (Fiberglass) Feed point radome Orange (standard) Directly on supporting mast 2760x1910x550 mm

Specifications are subject to change without prior notice

109

90

270

180

E-Plane

FREQ. (MHz)

FREQ. (MHz)

FM-03/P

FM PANEL ANTENNA

FEATURES HORIZONTAL OR VERTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 7.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON SQUARE TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

FM-03/P 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.15 Horizontal or Vertical 7.5 dB E-Plane ± 34° H-Plane ± 30° All Metal Parts DC Grounded

0

0

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

2200x2000x1080 mm 57 kg 0.77 m2 1.1 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Gray (standard) Directly on supporting mast 2290x2090x420 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

110

FREQ. (MHz)

FM-05H/P

FM PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 6.5 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FM-05H/P 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.15 Horizontal 6.5 dB E-Plane ± 38° H-Plane ± 28° All Metal Parts DC Grounded

RADIATION PATTERNS (Mid Band) 0

0

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

2500x1700x1202 mm 58 kg 0.72 m2 1.05 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, silver plated berylium copper, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Gray (standard) Directly on supporting mast 2590x1920x580 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

111

FREQ. (MHz)

FM-05V/P

FM PANEL ANTENNA

FEATURES VERTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 6 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS ON TRIANGULAR TOWERS STAINLESS STEEL DIPOLES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

FM-05V/P 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.15 Vertical 6 dB E-Plane ± 34° H-Plane ± 36° All Metal Parts DC Grounded

0

0

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

2200x2000x1202 mm 59 kg 0.79 m2 1.14 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for FM-05V) Gray (standard) Directly on supporting mast 2290x2090x500 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

112

FREQ. (MHz)

FM-01S

FM PANEL ANTENNA

mm 2 66 22 lude c s) (in pole di

FEATURES

2400 mm

VERTICAL POLARIZATION BROADBAND 87.5 ÷ 108 MHz 1.8 dB GAIN (one bay) OMNIDIRECTIONAL PATTERN (one bay) STAINLESS STEEL DIPOLES

1645 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

MOUNTING

RADIATION PATTERNS (Mid Band) (one bay)

FM-01S 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤1.3 Vertical 1.8 dB (one bay) E-Plane ± 35° H-Plane Omnidirectional(one bay) All Metal Parts DC Grounded

0

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

See photo (one bay) 110 kg (reflector and 2 dipoles) 1.02 m2 (reflector and 2 dipoles) 1.41 kN (reflector and 2 dipoles) 220 km/h Reflector (hot dip galvanized steel) Dipole (Stainless steel) Internal parts ( Silver plated brass, Polished brass,Deoxidized aluminium) Special integrated reflector with Ø 324 pipe

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

113

(one bay)

FREQ. (MHz)

FMC-06/SP

FM TOP OR SIDEMONT DIPOLE

FEATURES CIRCULAR / ELLIPTICAL POLARIZATION BROADBAND 95.2 ÷ 108 MHz

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FMC-06/SP 95.2 ÷ 108 MHz 50 ohm 7/8” EIA 7.5 kW ≤ 1.12 Circular / Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 3 dB with ø 100 pole All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

1550 x 830 x 830 mm 20.5 kg 0.40 m2 0.75 kN (wind speed 150 km/h) 220 km/h External parts (stailess steel, nickel plated brass) Internal parts (polished brass, silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Gray (standard) With special pipe clamps ø 75 ÷ 150 mm 1600 x 1010 x 1075 mm

Specifications are subject to change without prior notice

114

FREQ. (MHz)

FMC-06/SP1

FM TOP OR SIDEMONT DIPOLE

FEATURES CIRCULAR / ELLIPTICAL POLARIZATION BROADBAND 87.5 ÷ 99 MHz

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING PACKING

FMC-06/SP1 87.5 ÷ 99 MHz 50 ohm 7/8” EIA 7.5 kW ≤ 1.12 Circular / Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 3 dB with ø 100 pole All metal parts DC grounded

RADIATION PATTERNS (Mid Band) 0

0

90

270

90

270

10

10

6

6

1 dB

3 1 dB

180

180

Horizontal Component

Vertical Component

VSWR

1550 x 920 x 920 mm 21 kg 0.40 m2 0.75 kN (wind speed 150 km/h) 220 km/h External parts (stailess steel, nickel plated brass) Internal parts (polished brass, silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Gray (standard) With special pipe clamps ø 75 ÷ 150 mm 1680 x 1080 x 1160mm

Specifications are subject to change without prior notice

115

FREQ. (MHz)

3VTV-02/EB

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 174 ÷ 254 MHz 8 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

3VTV-02/EB 174 ÷ 254 MHz 50 ohm 7/8” EIA 3 kW ≤ 1.15 Horizontal 8 dB E-Plane ± 31° H-Plane ± 28° All metal parts DC grounded

0

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

MOUNTING PACKING

1300 x 1300 x 532 mm 36 kg 0.75 m2 1.10 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass) Directly on supporting mast or tower 1410 x 1410 x 750 mm

FREQ. (MHz) GAIN (dB)

FREQ. (MHz)

Specifications are subject to change without prior notice

116

3VTV-04/EB

VHF PANEL ANTENNA

FEATURES HORIZONTAL POLARIZATION BROADBAND 174 ÷ 254 MHz 11 dB GAIN DIRECTIONAL PATTERN SUITABLE AS A COMPONENT IN VARIOUS ARRAYS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

3VTV-04/EB 174 ÷ 254 MHz 50 ohm 7/8” EIA 3 kW ≤ 1.15 Horizontal 11 dB E-Plane ± 31° H-Plane ± 13° All metal parts DC grounded

0

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

MOUNTING PACKING

2800 x 1300 x 499 mm 84 kg 1.75 m2 2.73 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass) Directly on supporting mast or tower 2910 x 1625 x 720 mm

FREQ. (MHz) GAIN (dB)

FREQ. (MHz)

Specifications are subject to change without prior notice

117

Switching Units And Manual Switches

Manual Switches

121

FM Switching Units

123

VHF B3 Switching Units

127

UHF Switching Units

129

119

MANUAL SWITCHES

GENERAL FEATURES FREQUENCY RANGE IMPEDENCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame

- Supporting plate

- External body

- Inner conductor

- Insulating material EXTERNAL FINISHING

0.1 ÷ 860 MHz * 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Available on request Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

* Up to 790 MHz for 6-1/8”

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

50

4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports.

Specifications are subject to change without prior notice

121

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

MANUAL SWITCHES

3 PORTS / 1 U-LINK MANUAL SWITCHES TYPE

CMT-01 CMT-01/U CMT-11 CMT-11/U CMT-21/3 CMT-21/3/U CMT-21/4 CMT-21/4/U CMT-21/6 CMT-21/6/U

U-LINKS

PORTS

DIMENSIONS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5”

1 1 1 1 1 1 1 1 1 1

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F

3 3 3 3 3 3 3 3 3 3

266.5 266.5 399 399 489 489 489 489 489 489

482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6

255 255 255 255 360 334 340 334 340 334

150 150 200 200 250 250 250 250 250 250

12 10.5 21 18.5 28 26 32 28.5 38 34

3 PORTS / 1 U-LINK MANUAL SWITCHES

4 PORTS / 2 U-LINKS MANUAL SWITCHES TYPE

CMT-02 CMT-02/U CMT-12 CMT-12/U CMT-22/3 CMT-22/3/U CMT-22/4 CMT-22/4/U CMT-22/6 CMT-22/6/U

U-LINKS

PORTS

DIMENSIONS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5”

2 2 2 2 2 2 2 2 2 2

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F

4 4 4 4 4 4 4 4 4 4

310.5 310.5 399 399 532.5 532.5 532.5 532.5 532.5 532.5

482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6

255 255 255 255 360 334 340 334 340 334

150 150 200 200 250 250 250 250 250 250

16 14 28.5 25 51 47.5 55 50 63 57

4 PORTS / 2 U-LINKS MANUAL SWITCHES

Specifications are subject to change without prior notice

122

MANUAL SWITCHES

5 PORTS / 2 U-LINKS MANUAL SWITCHES TYPE

CMT-03 CMT-03/U CMT-13 CMT-13/U CMT-23/3 CMT-23/3/U CMT-23/4 CMT-23/4/U CMT-23/6 CMT-23/6/U

U-LINKS

PORTS

DIMENSIONS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5”

2 2 2 2 2 2 2 2 2 2

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F

5 5 5 5 5 5 5 5 5 5

310.5 310.5 440 440 560 560 560 560 560 560

482.6 482.6 560 560 760 760 760 760 760 760

255 255 255 255 360 334 340 334 340 334

150 150 200 200 250 250 250 250 250 250

17.5 15 35 30.5 58 53.5 66 60.5 72 65

5 PORTS / 2 U-LINKS MANUAL SWITCHES

6 PORTS / 3 U-LINKS MANUAL SWITCHES TYPE

CMT-04 CMT-04/U CMT-14 CMT-14/U CMT-24/3 CMT-24/3/U CMT-24/4 CMT-24/4/U CMT-24/6 CMT-24/6/U

U-LINKS

PORTS

DIMENSIONS

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F

6 6 6 6 6 6 6 6 6 6

310.5 310.5 480 480 660 660 660 660 660 660

482.6 482.6 560 560 860 860 860 860 860 860

255 255 255 255 360 334 340 334 360 334

150 150 200 200 250 250 250 250 250 250

22 19 38 33 69 64 75 69 82 75

6 PORTS / 3 U-LINKS MANUAL SWITCHES

WEIGHT

Specifications are subject to change without prior notice

123

MANUAL SWITCHES

7 PORTS / 3 U-LINKS MANUAL SWITCHES TYPE

CMT-05 CMT-05/U CMT-15 CMT-15/U CMT-25/3 CMT-25/3/U CMT-25/4 CMT-25/4/U CMT-25/6 CMT-25/6/U

U-LINKS

PORTS

DIMENSIONS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F

7 7 7 7 7 7 7 7 7 7

445 445 660 660 840 840 840 840 840 840

482.6 482.6 560 560 860 860 860 860 860 860

255 255 255 255 360 334 360 334 360 334

150 150 200 200 250 250 250 250 250 250

25.5 22 47 41 80 77 85 76.5 89 75

7 PORTS / 3 U-LINKS MANUAL SWITCHES

9 PORTS / 4 U-LINKS MANUAL SWITCHES TYPE

CMT-06 CMT-06/U CMT-16 CMT-16/U

U-LINKS

DIMENSIONS

PORTS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8”

4 4 4 4

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F

9 9 9 9

580 580 700 700

660 660 860 860

255 255 255 255

150 150 200 200

35 31 65 57

9 PORTS / 4 U-LINKS MANUAL SWITCHES

Note: F = female

Specifications are subject to change without prior notice

124

FM SWITCHING UNITS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame

- Supporting plate

- External body

- Inner conductor

- Insulating material EXTERNAL FINISHING

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Galvanized steel Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

50

4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports.

Specifications are subject to change without prior notice

125

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

FM SWITCHING UNITS

figure “1”

TYPE

SWU/FM-04 SWU/FM-04/U SWU/FM-05 SWU/FM-05/U SWU/FM-14 SWU/FM-14/U SWU/FM-15 SWU/FM-15/U SWU/FM-24/4/U SWU/FM-24/6/U SWU/FM-25/4/U SWU/FM-25/6/U

figure “2”

U-LINKS

PORTS

FIGURE

TYPE

Nr.

TYPE

Nr.

1-5/8” 1-5/8” 1-5/8” 1-5/8” 3-1/8” 3-1/8” 3-1/8” 3-1/8” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F

6 6 7 7 6 6 7 7 6 6 7 7

1 1 2 2 1 1 2 2 1 1 2 2

DIMENSIONS H (mm)

W (mm)

D (mm)

C (mm)

(kg)

2000 2000 2000 2000 2000 2000 2000 2000 1900 1900 2000 2000

600 600 600 600 600 600 600 600 900 900 900 900

715 715 715 715 750 750 750 750 790 790 790 790

150 150 150 150 200 200 200 200 250 250 250 250

63 61.5 68 66 105 102 112 109 162 168 170 178

Note: F = female

Specifications are subject to change without prior notice

126

WEIGHT

VHF-B3 SWITCHING UNITS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame

- Supporting plate

- External body

- Inner conductor

- Insulating material EXTERNAL FINISHING

174 ÷ 230 MHz 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Galvanized steel Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MAX MEAN POWER (kW) 300 200 100 50

5” 4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports.

Specifications are subject to change without prior notice

127

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

VHF-B3 SWITCHING UNITS

figure “1”

TYPE

SWU/BT-04 SWU/BT-04/U SWU/BT-05 SWU/BT-05/U SWU/BT-14 SWU/BT-14/U SWU/BT-15 SWU/BT-15/U SWU/BT-24/4/U SWU/BT-24/6/U SWU/BT-25/4/U SWU/BT-25/6/U

figure “2”

U-LINKS

PORTS

FIGURE

TYPE

Nr.

TYPE

Nr.

1-5/8” 1-5/8” 1-5/8” 1-5/8” 3-1/8” 3-1/8” 3-1/8” 3-1/8” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F

6 6 7 7 6 6 7 7 6 6 7 7

1 1 2 2 1 1 2 2 1 1 2 2

DIMENSIONS H (mm)

W (mm)

D (mm)

C (mm)

(kg)

2000 2000 2000 2000 2000 2000 2000 2000 1900 1900 2000 2000

600 600 600 600 600 600 600 600 900 900 900 900

715 715 715 715 750 750 750 750 790 790 790 790

150 150 150 150 200 200 200 200 250 250 250 250

65 63 68 66 98 94 104 101 158 166 163 170

Note: F = female

Specifications are subject to change without prior notice

128

WEIGHT

UHF SWITCHING UNITS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame

- Supporting plate

- External body

- Inner conductor

- Insulating material EXTERNAL FINISHING

470 ÷ 860 MHz * 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Galvanized steel Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

* up to 790 MHz for 6-1/8”

MAX MEAN POWER (kW) 300

100

6-1/8” 5”

50

4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

100

FM

200

VHF-BIII

500

UHF

1000

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports.

Specifications are subject to change without prior notice

129

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

UHF SWITCHING UNITS

figure “1”

TYPE

SWU/TV-04 SWU/TV-04/U SWU/TV-05 SWU/TV-05/U SWU/TV-14 SWU/TV-14/U SWU/TV-15 SWU/TV-15/U SWU/TV-24/4/U SWU/TV-24/6/U* SWU/TV-25/4/U SWU/TV-25/6/U*

figure “2”

U-LINKS

PORTS

FIGURE

TYPE

Nr.

TYPE

Nr.

1-5/8” 1-5/8” 1-5/8” 1-5/8” 3-1/8” 3-1/8” 3-1/8” 3-1/8” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F

6 6 7 7 6 6 7 7 6 6 7 7

1 1 2 2 1 1 2 2 1 1 2 2

DIMENSIONS H (mm)

W (mm)

D (mm)

C (mm)

(kg)

2000 2000 2000 2000 2000 2000 2000 2000 1900 1900 2000 2000

600 600 600 600 600 600 600 600 900 900 900 900

715 715 715 715 750 750 750 750 790 790 790 790

150 150 150 150 200 200 200 200 250 250 250 250

60 58.5 63 61.5 90 87 93 90 152 160 160 168

Note: F = female *: up to 790 MHz

Specifications are subject to change without prior notice

130

WEIGHT

Coaxial Components

FM Coaxial Splitters

133

VHF Blll Coaxials Splitters

136

UHF Coaxials Splitters

138

Rigid Lines

141

Fine Matchers

143

Directional Couplers

145

Coaxial Elbows

147

Coaxial Adaptors

149

FM 3db Couplers

152

UHF 3db Couplers

153

Coaxials Accessories

154

Coaxial Loads

156

Connectors for Coaxial Cables

157

131

FM COAXIAL SPLITTERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS POWER RATING * OPERATING TEMPERATURE RANGE CONNECTORS NUMBER OF WAYS WEIGHT PRESSURIZATION MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB See table -40 ÷ +70° C See table See table See table Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass, polished brass, deoxided aluminium Teflon Painted Ral 7001, Nickel plating

* ambient temperature 40° C

STANDARD TYPES WITH TUNABLE STUB TYPE

RFM-02/ST RFM-03/ST RFM-04/ST RFM-12/ST RFM-13/ST RFM-14/ST RFM-202/ST RFM-204/ST RFM-44/ST RFM-232/ST

INPUT CONNECTOR

OUTPUT CONNECTORS Nr. Type

7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 4-1/2” EIA 4-1/2” EIA 6-1/8” EIA 6-1/8” EIA

2 3 4 2 3 4 2 4 4 2

7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA

DIMENSIONS

POWER RATING (kW)

WEIGHT

A (mm)

B (mm)

C (Ømm)

87.5 MHz

98 MHz

108 MHz

(kg)

2627 2627 2627 2606 2606 2606 1700 2548 2706 1936

147.5 206 206 147.5 206 206 330 430 508 300

41.9 41.9 41.9 41.9 41.9 41.9 106 106 155.6 155.6

8.2 8.2 8.2 16.4 18.8 18.8 84 84 173 168

7.7 7.7 7.7 15.4 17.9 17.9 80 80 163 160

7.3 7.3 7.3 14.6 17 17 75 75 155 150

11.5 12.5 13 10.5 11.5 12 23 37 60 40

Specifications are subject to change without prior notice

133

FIGURE

1 1 1 1 1 1 2 1 1 2

FM COAXIAL SPLITTERS

STANDARD TYPES TYPE

RFM-72 RFM-73 RFM-74 RFM-76 RFM-112 RFM-113 RFM-114 RFM-52 RFM-53 RFM-54 RFM-56 RFM-02 RFM-03 RFM-04 RFM-05 RFM-06 RFM-08 RFM-64 RFM-66 RFM-12 RFM-13 RFM-14 RFM-15 RFM-16 RFM-18 RFM-143 RFM-144 RFM-145 RFM-146 RFM-148 RFM-22 RFM-23 RFM-24 RFM-25 RFM-294 RFM-295 RFM-203 RFM-204

INPUT CONNECTOR

OUTPUT CONNECTORS Nr. Type

7/16 7/16 7/16 7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA

2 3 4 6 2 3 4 2 3 4 6 2 3 4 5 6 8 4 6 2 3 4 5 6 8 3 4 5 6 8 2 3 4 5 4 5 3 4

7/16 7/16 7/16 7/16 NF NF NF 7/16 7/16 7/16 7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/16 7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA

DIMENSIONS

POWER RATING (kW)

WEIGHT

A (mm)

B (mm)

C (Ømm)

87.5 MHz

98 MHz

108 MHz

(kg)

1638 1638 1638 1638 1717.5 1717.5 1717.5 1616 1616 1616 1616 1761 1761 1761 1761 1761 1761 1666 1666 1761 1761 1761 1761 1761 1761 1686.5 1686.5 1686.5 1686.5 1686.5 1769.5 1769.5 1769.5 1769.5 1777 1777 1784 1784

103 103 103 104 67 67 67 103 103 103 104 147.5 206 206 206 206 206 103 104 147.5 206 206 206 206 206 188 248 248 248 248 206 309 309 309 349 349 428 428

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 106 106 106 106

4.6 4.6 4.6 4.6 1.7 2.5 3.4 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 18.4 18.8 16.4 18.8 18.8 18.8 18.8 18.8 24.6 32.8 41 49.2 56 37.6 56 56 56 75.2 84 84 84

4.3 4.3 4.3 4.3 1.6 2.4 3.2 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 17.2 17.9 15.4 17.9 17.9 17.9 17.9 17.9 23.1 30.8 38.5 46.2 53 35.8 53 53 53 71.6 80 80 80

4.1 4.1 4.1 4.1 1.5 2.3 3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 16.4 17 14.6 17 17 17 17 17 21.9 29.2 36.5 43.8 50 34 50 50 50 68 75 75 75

4.5 4.8 5 5.3 3.5 3.7 4 4.5 4.7 5 5.3 7.5 8 8.5 9 9.5 13 6.5 6.8 8.4 8.9 9.4 10.4 10.9 12.4 14.5 15 16 20 22.8 16 20 21 22 28 28.5 37 43.5

Specifications are subject to change without prior notice

134

FIGURE

3 3 3 3 4 4 4 5 5 5 5 6 6 6 6 6 6 3 3 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

FM COAXIAL SPLITTERS

figure “1”

figure “2”

figure “3”

figure “4”

figure “5”

figure “6”

2 way s

3/4 ways

Specifications are subject to change without prior notice

135

5/6 ways

8 ways

VHF-B3 COAXIAL SPLITTERS

GENERAL FEATURES FREQUENCY RANGE IMPEDENCE RETURN LOSS POWER RATING * OPERATING TEMPERATURE RANGE CONNECTORS NUMBER OF WAYS WEIGHT PRESSURIZATION MATERIALS - External body

- Inner conductor

174 ÷ 230 MHz 50 ohm ≥ 32 dB See table -40 ÷ +70° C See table See table See table Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass, polished brass, deoxided aluminium Teflon Painted Ral 7001, Nickel plating

- Insulator EXTERNAL FINISHING

* mean power , ambient temperature 40° C , atmosphere pressure, dry air

STANDARD TYPES WITH TUNABLE STUB TYPE

RBT-22/ST RBT-23/ST RBT-24/ST RBT-202/ST RBT-203/ST RBT-43/ST

INPUT CONNECTOR 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 6-1/8” EIA

OUTPUT CONNECTORS Nr. Type 2 3 4 2 3 3

1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA

DIMENSIONS

POWER RATING (kW)

WEIGHT

A (mm)

B (mm)

C (Ømm)

174 MHz

202 MHz

230 MHz

(kg)

1406 1406 1406 1406 1406 1366

218.5 309 309 430 428 483

79.4 79.4 79.4 106 106 155.6

26 39 39 84 84 168

24 36 36 80 80 159

23 33 33 75 75 150

13 16 18 21 28 40

Specifications are subject to change without prior notice

136

FIGURE

1 1 1 2 1 1

VHF-B3 COAXIAL SPLITTERS

figure “1”

figure “2”

figure “3”

STANDARD TYPES TYPE

RBT-02 RBT-03 RBT-04 RBT-05 RBT-06 RBT-08 RBT-12 RBT-13 RBT-14 RBT-15 RBT-16 RBT-18 RBT-144 RBT-145 RBT-146 RBT-148 RBT-22 RBT-23 RBT-24 RBT-25 RBT-295 RBT-296

INPUT CONNECTOR

OUTPUT CONNECTORS Nr. Type

7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA

2 3 4 5 6 8 2 3 4 5 6 8 4 5 6 8 2 3 4 5 5 6

7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA

DIMENSIONS

WEIGHT

POWER RATING (kW)

A (mm)

B (mm)

C (Ømm)

174 MHz

202 MHz

230 MHz

(kg)

1261 1261 1261 1282 1282 1261 1261 1261 1261 1261 1261 1261 1185 1185 1185 1185 1276.5 1276.5 1276.5 1276.5 1276.5 1276.5

147.5 206 206 206 206 206 147.5 206 206 206 206 206 248 248 248 248 206 309 309 279.5 349 314

25 25 25 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 106 106

5.7 5.7 5.7 5.7 5.7 5.7 11.4 13.2 13.2 13.2 13.2 13.2 22.8 28.5 34.2 39 26 39 39 39 59 59

5.3 5.3 5.3 5.3 5.3 5.3 10.6 12.2 12.2 12.2 12.2 12.2 21.2 26.5 31.8 36 24 36 36 36 55 55

5 5 5 5 5 5 10 11.6 11.6 11.6 11.6 11.6 20 25 30 33 23 33 33 33 52 52

5 5.5 6 8.5 9 12 6 7 7 8 9 10 14 15 16 18 12.5 16 17 19 20 21

Specifications are subject to change without prior notice

137

FIGURE

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

UHF COAXIAL SPLITTERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS ** POWER RATING *** OPERATING TEMPERATURE RANGE CONNECTORS NUMBER OF WAYS WEIGHT PRESSURIZATION MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

470 ÷ 860 MHz * 50 ohm ≥ 32 dB See table -40 ÷ +70° C See table See table See table Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass, polished brass, deoxided aluminium Teflon Painted Ral 7001, Nickel plating

* up to 790 MHz for 6-1/8” ** ≥ 26 dB for 7/16 and Nf splitters *** mean power , ambient temperature 40° C , atmosphere pressure, dry air

STANDARD TYPES WITH TUNABLE STUB TYPE

RTV-02/ST RTV-03/ST RTV-04/ST RTV-12/ST RTV-13/ST RTV-14/ST RTV-22/ST RTV-23/ST RTV-24/ST

INPUT CONNECTOR

OUTPUT CONNECTORS Nr. Type

7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA

2 3 4 2 3 4 2 3 4

7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA

DIMENSIONS

POWER RATING (kW)

WEIGHT

A (mm)

B (mm)

C (Ømm)

470 MHz

665 MHz

860 MHz

(kg)

887 887 887 866 866 866 619 619 619

147.5 206 206 147.5 206 206 309 309 309

41.8 41.8 41.8 41.8 41.8 41.8 79.4 79.4 79.4

3.4 3.4 3.4 6.8 8 8 16 24 24

2.9 2.9 2.9 5.8 6.8 6.8 13.6 20 20

2.5 2.5 2.5 5 6 6 12 17 17

7.5 8 8.4 6.9 7.4 7.8 10.2 11 11.2

Specifications are subject to change without prior notice

138

FIGURE

1 1 1 1 1 1 1 1 1

UHF COAXIAL SPLITTERS

STANDARD TYPES TYPE

RTV-102 RTV-104 RTV-72 RTV-73 RTV-74 RTV-76 RTV-52 RTV-53 RTV-54 RTV-56 RTV-02 RTV-03 RTV-04 RTV-05 RTV-06 RTV-08 RTV-12 RTV-13 RTV-14 RTV-15 RTV-16 RTV-18 RTV-143 RTV-144 RTV-145 RTV-146 RTV-148 RTV-22 RTV-23 RTV-24 RTV-25 RTV-26 RTV-82 RTV-294 RTV-295 RTV-296 RTV-298 RTV-202 RTV-203

INPUT CONNECTOR

OUTPUT CONNECTORS Nr. Type

A (mm)

B (mm)

C (Ømm)

470 MHz

665 MHz

860 MHz

(kg)

NF NF 7/16 7/16 7/16 7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA

2 4 2 3 4 6 2 3 4 6 2 3 4 5 6 8 2 3 4 5 6 8 3 4 5 6 8 2 3 4 5 6 2 4 5 6 8 2 3

389 389 660 660 660 660 688 688 688 688 711 711 711 711 711 732 711 711 711 711 711 711 603 603 603 603 713 726.5 726.5 726.5 726.5 726.5 721 747 726.5 726.5 747 754 755

67 67 92 132 132 155 91 138 138 138 147.5 206 206 206 206 206 147.5 206 206 206 206 206 188 248 248 248 248 206 309 309 309 254 295 349 284 284 349 428 428

25 25 25 25 25 25 25 25 25 25 25 25 25 41.8 41.8 41.8 41.8 41.8 41.8 41.8 41.8 41.8 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 106 106 106 106 106 106

0.35 0.35 1.9 1.9 1.9 1.9 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 6.8 8 8 8 8 8 10.2 13.6 17 20.4 24 16 24 24 24 24 24 32 37 37 37 37 37

0.3 0.3 1.6 1.6 1.6 1.6 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 5.8 6.8 6.8 6.8 6.8 6.8 8.7 11.6 14.5 17.4 20 13.6 20 20 20 20 20 27.2 31 31 31 31 31

0.26 0.26 1.4 1.4 1.4 1.4 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 5 6 6 6 6 6 7.5 10 12.5 15 17 12 17 17 17 17 17 24 28 28 28 28 28

1.5 1.2 2 2.5 3 3.8 2.2 2.4 2.5 4 4.4 4.8 5.3 5.8 6.3 8.1 5.2 5.6 6 6.5 6 7.5 9 9.4 10 11 14 9 11 12.5 14 15 11 19 20.5 22 24 22 23

NF NF 7/16 7/16 7/16 7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA

POWER RATING (kW)

DIMENSIONS

Specifications are subject to change without prior notice

139

WEIGHT

FIGURE

2 2 3 3 3 3 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

UHF COAXIAL SPLITTERS

figure “1”

2 way s

3/4 ways

figure “2”

figure “3”

figure “4”

figure “5”

Specifications are subject to change without prior notice

140

RIGID LINES

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER LENGHT WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Outer conductor

- Inner conductor

- Insulating material Terminated type

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table 0.1 ÷ 4 m (typical 4 m) See table -40 ÷ +70° C Polished Copper Polished Copper Teflon EIA Flanged / EIA Unflanged

MAX MEAN POWER (kW) 300 200 100 50

5” 4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1 0 0 0 (MHz)

Specifications are subject to change without prior notice

141

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

RIGID LINES

EIA UNFLANGED RIGID LINES TYPE 1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B) 41.27 / 38.78 79.4 / 76.88 106 / 103 155.6 / 151.9

Inner conductor (C/D)

E

16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 66 / 64

11 18 18 26

WEIGHT (kg/m) 1.83 3.75 5.6 9.76

EIA FLANGED RIGID LINES TYPE 1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B)

Inner conductor (C/D)

E

41.27 / 38.78 79.4 / 76.88 106 / 103 155.6 / 151.9

16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 66 / 64

89 128 159 206

WEIGHT (kg/m) 2.7 5.2 7.9 14.5

Specifications are subject to change without prior notice

142

FINE MATCHERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

See table 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300 hPa (300 mBar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001

MAX MEAN POWER (kW) 300 200

6-1/8” 5”

50

4-1/2” 3-1/8”

10

1-5/8”

5

1 0.5

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

143

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature = 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature102°

FINE MATCHERS

figure “1”

figure “2”

TYPE

FREQUENCY RANGE (MHz)

CONNECTORS

FIGURE

FMBP1-03 FMBP-03 FMBP-04 FMBPFM-03 FMBPFM-07 FMFM-03 FMFM-04 FMFM-06 FMFM-07 FMBT-03 FMBT-04 FMTV-03 FMTV-04 FMTV-06/A FMTV-07

47 ÷ 57 66 ÷ 88 66 ÷ 88 76 ÷ 108 76 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 174 ÷ 230 174 ÷ 230 470 ÷ 860 470 ÷ 860 470 ÷ 680 470 ÷ 860

1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

1 1 1 1 1 1 1 1 1 1 1 2 2 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

1442 980 950 816 816 764 764 764 764 370 370 354 390 580 442

127.5 127.5 208.7 127.5 264.5 127.5 208.7 363 264.5 127.5 208.7 121.2 183.5 363 233.5

89 89 128 89 159 89 128 206 159 89 128 89 128 206 159

6.5 6 7.5 5 10 4 6.5 17.5 9 3.2 4 5 7.4 15 10.5

Specifications are subject to change without prior notice

144

DIRECTIONAL COUPLERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING FACTOR DIRECTIVITY MAX MEAN POWER * OPERATING TEMPERATURE RANGE CONNECTORS PROBE CONNECTORS WEIGHT PRESSURIZATION ** MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below ≥ 40 dB See table below -40 ÷ +70° C See table below NF See table below Typical operating pressure 300 hPa (300 mBar) Nickel plated brass, polished brass Silver plated brass Teflon Painted Ral 7001

* waterproof **only for waterproff and protection type

MAX MEAN POWER (kW) 300 200 100

6-1/8”

50

4-1/2”

20 10

1-5/8”

5

7/8” 7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

145

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature = 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature102°

DIRECTIONAL COUPLERS

figure “1”

figure “2”

TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/W ADR-02/P ADR-02/W ADR-03/P ADR-03/W ADR-04/P ADR-04/W ADR-04/3T ADR-06/P ADR-06/W ADR-07/W ADR-07/3T ADR-08/P ADR-08/W

NF 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 6-1/8” EIA 7/16 F 7/16 M 4-1/2” EIA 4-1/2” EIA

2 2 2 2 2 2 2 3 2 2 2 3 2 2

1 1 1 1 1 2 2 2 2 2 1 1 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

177 200 200 198 198 246 246 304 281 281 180 238 246 246

149 172 148 172 149 195 172 272 276 253 149 149 229 206

45 58 58 89 89 128 128 128 206 206 45 45 159 159

2.5 2.8 2.6 2.4 2.2 4.5 4 5 10 9.6 2.5 3.2 6 5.5

WATER PROOF

PROTECTION

YES YES YES YES YES YES YES NO YES YES YES NO YES YES

NO YES NO YES NO YES NO NO YES NO NO NO YES NO

COUPLING FACTOR (dB) FM VHF UHF min/max min/max min/max -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -67/-62 -61/-57 -49/-46 -67/-62 -61/-57 -49/-46 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -64/-59 -58/-54 -43/-46 -64/-59 -58/-54 -43/-46

Note: F = female / M = male

Specifications are subject to change without prior notice

146

COAXIAL ELBOWS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz ** 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

* only for flanged types ** up to 790 MHz for 6-1/8”

MAX MEAN POWER (kW) 300 200 100

6-1/8” STANDARD CONDITIONS: 5” V.S.W.R. = 1.0 Ambient temperature 40°C 4-1/2” Atmospheric Pressure, DryAir 3-1/8” Inner Conductor Temperature 102°C 1-5/8”

50

20 10 5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1 0 0 0 (MHz)

Specifications are subject to change without prior notice

147

COAXIAL ELBOWS

figure “1”

figure “2”

figure “3”

TYPE

GMT-01 GMT-01/CP* GMT-03 GMT-04 GMT-05 GMT-06 GMT-07 GMT-10 GMT-11 GMT-12 GMT-15 GMT-16

CONNECTORS

7/8” EIA 7/8” EIA 1-5/8” EIA M-F 1-5/8” EIA 3-1/8” EIA 4-1/8” FL 6-1/8” EIA 4-1/2” EIA 1-5/8” UNFL M 3-1/8” UNFL M 6-1/8” UNFL M 4-1/2” UNFL M

DIMENSIONS

FIGURE

2 4 3 2 2 2 2 2 1 1 1 1

WEIGHT

A (mm)

B (mm)

C (mm)

D (mm)

(kg)

55 55 65 65 85 100 130 100 38.4 59.5 89.5 79.5

84 84 110 110 149 180 233 179.5 60 89 140 109

58 58 89 89 128 160 206 159 48 90 170 120

149 98.4 149 256.5 184.3

0.62 0.72 1.4 1.3 2.9 4 9.1 4.4 0.4 2.1 6.7 3.5

figure “4”

Note: F = female / M = male * with Capacitive Probe Specifications are subject to change without prior notice

148

COAXIAL ADAPTORS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION *

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Typical operating pressure 300 hPa (300 mbar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING * only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

50

4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1 0 0 0 (MHz)

Note: Power handling is limited by the smallest size Specifications are subject to change without prior notice

149

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

COAXIAL ADAPTORS

figure “1”

figure “2”

FLANGED COAXIAL ADAPTORS TYPE

TRS-01 TRS-02 TRS-03 TRS-04 TRS-05 TRS-06 TRS-07 TRS-08 TRS-11 TRS-12 TRS-13 TRS-14 TRS-15 TRS-16 TRS-17 TRS-19 TRS-22 TRS-26 TRS-27 TRS-36 TRS-37 TRS-39 TRS-40 TRS-41 TRS-42 TRS-44 TRS-45 TRS-46

CONNECTORS

7/16 F 7/16 M 7/8” EIA M 7/8” EIA M 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA M 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 3-1/8” EIA 4-1/2” EIA 6-1/8” EIA 4-1/2” EIA 4-1/2” EIA 1-5/8” EIA M 6-1/8” EIA 4-1/2” EIA 6-1/8” EIA 3-1/8” EIA 1-5/8” EIA

FIGURE

NF NF NF NM NF NM 7/16 F 7/16 M NF NM 7/16 F 7/16 M 7/8” EIA 7/8” EIA 1-5/8” EIA NF 3-1/8” EIA 7/8” EIA 4-1/8” FL M NF 3-1/8” EIA NF 7/8” EIA 4-1/2” EIA 3-1/8” EIA 7/16 F 7/16 F Dezifix D

6 6 5 5 4 4 3 3 4 4 4 4 1 2 1 4 1 1 2 4 1 4 2 1 1 4 4 3

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

45 59 42.5 39 83.5 80 63.5 66 123.5 120 111 125 83.5 60 110 162 150 120 65 207 95 150 21 150 117 194.5 149.5 138.5

32 35 58 58 58 58 58 58 89 89 89 89 89 89 128 128 150 128 159 206 159 159 89 206 159 206 128 98

0.14 0.19 0.3 0.32 0.3 0.36 0.2 0.28 1 1 1 1 0.77 0.85 1.5 3 3.8 1.3 2.6 6.4 3 3.5 0.65 4.5 2.5 4.8 3 2.6

Note: F = female / M = male

Specifications are subject to change without prior notice

150

figure “3”

figure “4”

figure “5”

figure “6”

COAXIAL ADAPTORS

figure “7”

figure “8”

figure “9”

UNFLANGED COAXIAL ADAPTORS TYPE

TRS-11/U TRS-12/U TRS-13/U TRS-14/U TRS-16/U TRS-17/U TRS-19/U TRS-22/U TRS-26/U TRS-27/U TRS-38/U TRS-41/U TRS-42/U TRS-43/U TRS-47/U TRS-48/U

CONNECTORS

1-5/8” UNFL M 1-5/8” UNFL M 1-5/8” UNFL M 1-5/8” UNFL M 1-5/8” UNFL M 3-1/8” UNFL M 3-1/8” UNFL M 6-1/8” UNFL M 3-1/8” UNFL M 4-1/2” UNFL M 6-1/8” UNFL M 6-1/8” UNFL M 4-1/2” UNFL M 4-1/2” UNFL M 4-1/2” UNFL M 4-1/2” UNFL M

FIGURE

NF NM 7/16 F 7/16 M 7/8” EIA 1-5/8” UNFL M NF 3-1/8” UNFL M 7/8” EIA 4-1/8 FL 1-5/8” UNFL M 4-1/2” UNFL M 3-1/8” UNFL M 4-1/8” UNFL M 7/8” EIA 4-1/2” EIA

9 9 9 9 8 7 9 7 8 8 7 7 7 7 8 8

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

103 99.5 56.4 104 115 124.5 104 177 101 45 152.5 153 145 119 103 149

57.5 57.5 45 57.5 58 100 100 177 100 159 177 177 127 127 127 159

0.3 0.33 0.25 0.35 0.5 1 1 3.5 1 1.2 3 3.3 1.8 1.8 1.4 2

Note: F = female / M = male

Specifications are subject to change without prior notice

151

FM 3dB COUPLERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING ISOLATION PHASE DIFFERENCE BETWEEN THE OUTPUTS MAX MEAN POWER * OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION MATERIALS - External body

- Inner conductor

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB 3 ± 0.3dB ≥ 32 dB 90° ± 1° See table below -40 ÷ +70° C See table below See table below No Polished copper, polished brass, deoxided aluminium Silver plated brass, silver plated aluminium silver plated phosphate bronze Teflon Painted Ral 7001, Nickel plating

- Insulator EXTERNAL FINISHING * ambient temperature 40°C

figure “1”

TYPE

CONNECTORS

figure “2”

FIGURE

DIMENSIONS A (mm)

IFM-02 IFM-03/U IFM-04/U IFM-06/U IFM-07/U

NF 7/16 F 7/8” EIA 1-5/8” UNFL F 3-1/8” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F

B (mm)

C (mm)

1

771

880

126

2 2 2 2

753 753 753 753

826 874 1062 1020

186 230 370 270

D (mm) 38 38 58 103 130 240 180

WEIGHT MAX MEAN POWER (kW) (kg) 3.5 3.5 4.1 7.8 15 32 20

0.75 4 5 17 50 160 75

Note: F = female Specifications are subject to change without prior notice

152

UHF 3dB COUPLERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING ISOLATION PHASE DIFFERENCE BETWEEN THE OUTPUTS MAX MEAN POWER * OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

470 ÷ 870 MHz 50 ohm ≥ 30 dB 3 ± 0.3dB ≥ 30 dB 90° ± 1° See table below -40 ÷ +70° C See table below See table below Aluminium Silver plated brass Teflon Painted Ral 9005, Nickel plating

* ambient temperature 40°C

figure “1”

TYPE

ITV-02X ITV-03X ITV-04X ITV-05X

CONNECTORS

NF 7/16 F 7/8” EIA 1-5/8” UNFL 3-1/8” UNFL

FIGURE

1 1 1 1 1

DIMENSIONS A (mm)

B (mm)

C (mm)

D (mm)

134 134 151 169 240

172 172 222 240 346

94 97 177 232 272

80 80 96 110 118

WEIGHT MAX MEAN POWER (kW) (kg) 2 2 3 5 15

0.25 1.4 2 6 17

Note: F = female Specifications are subject to change without prior notice

153

COAXIAL ACCESSORIES

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Polished copper, polished brass Silver plated brass Teflon Nickel plating

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

50

4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

154

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

COAXIAL ACCESSORIES

BULLETS TYPE

INN-01 INN-02 INN-03 INN-07 INN-05

CONNECTORS

DIMENSIONS

7/8” 1-5/8” 3-1/8” 4-1/2” 6-1/8”

WEIGHT

A (mm)

B (mm)

(kg)

59.8 78.4 100 10 125

20.65 41.75 81.2 105.3 154

0.02 0.1 0.3 0.6 1.3

GAS BARRIERS TYPE

CONNECTORS

DIMENSIONS A (mm)

BAR-01 BAR-02 BAR-03 BAR-04 BAR-05

30 30 35 40 40

7/8” EIA M 1-5/8”EIA M 3-1/8”EIA M 4-1/2”EIA M 6-1/8”EIA M

WEIGHT

B (mm)

(kg)

58 89 128 159 206

0.6 1.3 2.7 4.3 8.5

CLAMP FLANGE TYPE

CONNECTORS

DIMENSIONS A (mm)

FLN-01 FLN-02 FLN-10 FLN-27

1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

41 42 64 35.5

WEIGHT

B (mm)

(kg)

89 128 206 159

0.5 0.9 2 1.2

STRAIGHT COUPLINGS TYPE

FLN-03 FLN-04 FLN-09 FLN-28

CONNECTORS

DIMENSIONS

1-5/8”UNFL M 3-1/8”UNFL M 6-1/8”UNFL M 4-1/2”UNFL M

WEIGHT

A (mm)

B (mm)

(kg)

78.4 100 95 71.6

60 100 177 127

0.3 0.81 2.2 0.9

Note : M = male

Specifications are subject to change without prior notice

155

COAXIAL LOADS

TYPE CRC-01 CRC-02 CRC-03 CRC-04 CRC-05 CRC-06 CRC-07/F CRC-07/M CRC-08/F CRC-08/M CRC-09 CRC-10 CRC-11 CRC-12 CRC-13 CRC-14 CRC-15 CRC-16 CRC-17

CONNECTORS NM 7/16 M NM NM 7/16 M NM NF NM NF NM NF NF 7/16 F 7/16 F 7/16 F 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA

DIMENSIONS

FIGURE 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2

A (mm) 37 38 52 57 81 26 50 50 120 120 37 135 135 120 120 120 170 210 407

B (mm) 21 23 25 45 50 72 72 72 120 120 120 134 134 256 265 256 316 408 600

C (mm) // // // // // 115 113 115 139 141 219 214 332 222 502 646 504 765 730

WEIGHT (kg)

MAX MEAN POWER (W)

0.05 0.13 0.13 0.14 0.3 0.29 0.54 0.54 1.4 1.4 1.0 3.0 4.2 8.2 15 24 21 40 47

1 6 10 12 25 30 50 50 100 100 150 250 400 600 1000 1500 2500 4000 10000

Specifications are subject to change without prior notice

156

figure “1”

figure “2”

CONNECTORS FOR COAXIAL CABLES

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTOR WEIGHT PRESSURIZATION MATERIALS - External body

- Inner conductor

- Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300hPa (300mBar) Polished brass Cu Zn Sn Silver plated brass Teflon Nickel plating

MAX MEAN POWER 300 200 100

6-1/8” 5”

50

4-1/2” 3-1/8”

20 10

1-5/8”

5

1 0.5

0.2

40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

157

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

CONNECTORS FOR COAXIAL CABLES

TYPE

CNN-05 CNN-25 CNN-27 CNN-76 CNN-31 CNN-41 CNN-61 CNN-81 CNN-50 CNN-56 CNN-54 CNN-29 CNN-57 CNN-58 CNN-55 CNN-59 CNN-20 CNN-22 CNN-28 CNN-24 CNN-51 CNN-26 CNN-93 CNN-94 CNN-33 CNN-34 CNN-32 CNN-91

CONNECTORS

FOR CABLE TYPE

7/8” EIA M 7/8” EIA M 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 4-1/2” EIA 6-1/8” EIA NM N M (90°) NF 7/16 M 7/16 M (90°) 7/16 F 7/8” EIA M 7/8” EIA F + INN NM NF 7/16 M 7/16 F 7/8” EIA M 7/8” EIA F + INN 7/16 M 7/16 F 7/16 M 7/16 F 1-5/8” EIA F 3-1/8” EIA F

3/8” HELIFLEX HCA 38-50J 7/8” HELIFLEX HCA 78-50J 7/8” HELIFLEX HCA 78-50J 1-1/8” HELIFLEX HCA 118-50J 1-5/8” HELIFLEX HCA 158-50J 3-1/8” HELIFLEX HCA 318-50J 4-1/8” HELIFLEX HCA 418-50J 6-1/8” HELIFLEX HCA 618-50J 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 1-1/4” DRAKA RFA 1-1/4”-50 1-1/4” DRAKA RFA 1-1/4”-50 1-5/8” DRAKA RFA 1-5/8”-50 1-5/8” DRAKA RFA 1-5/8”-50 1-5/8” DRAKA RFA 1-5/8”-50 2-1/4” DRAKA RFA 2-1/4”-50

Note: F = female / M = male Specifications are subject to change without prior notice

158

159