Sira by Ascrizzi

FM Filters and Combiners - Catalogue 09

ANYWHERE THE SOLUTION

FM Filters and Combiners - Catalogue 09

Via Senatore Simonetta,26 20040 Caponago (MI) - Italy tel.: +39 02.95.96.11 fax +39 02.95.96.13.11 e-mail: info@sira.mi.it www.sira.mi.it

history SIRA SIRA is a privately owned company, founded in 1977 by a group of technicians active in the telecommunication field and specialized in RF technology. Sira has 11,000 sq.meters of manufacturing and support facility based in Caponago (MI) Italy. SIRA is a customer oriented company, which has adopted the philosophy of working together with its customers to meet the critical technical requirements for their systems with an attitude of enthusiasm and concern in order to provide the best results in the final products. This approach has given Sira a position of leadership in its field. Sira products are designed and manufactured in accordance with the particular international standards in force in the area. As a major position of its cross revenues, Sira has been investing in research and development, quality and reliability control and products safety in the RF field. This policy of investments has provided Sira with an extremely high level of experience in its field: there are Sira installations in more than 80 countries in the world.

quality

SIRA’s aim is to give to all its customers reliable products and services with the highest quality standards, this ambitious goal is achieved mainly by means of an integrated management system (Quality-Safety-environment) and is certified according to the norms UNI EN ISO 9001 (2000) and UNI EN 14001 (1996). The enhancement of company efficiency through the continuous improvement of the operative quality of the internal functions (effectiveness), the reduction of defects on sold products and the notable attention to the quality culture at all company levels have become SIRA’s fundamental cares. Moreover SIRA is committed in a thorough policy of environmental protection: a training and information process on all personnel is continuously carried out in order to grant a responsible management of all the activities in a special respect of the environment. For instance, the development and the implementation of new technologies, products and production processes is carried out with a thorough control for a rational use of energetic sources and of raw materials, minimizing the production of waste and the use of non-renewable resources, everything with the aim of keeping environmental impact on air and water as lowest as it is possible. For all SIRA’s activities it is fundamental to oppose the conditions of life and work which are against the health of the workers, as well as promoting freedom principles and self-respect for any human being. An extract from SIRA’s ethic code states that “Sira refuses any discrimination based on sex, race, languages, personal and social conditions, religion and political choices” and to this aim Sira promotes a working environment that, inspired to the principles of respect, fairness and collaboration, is meant to support the involvement of all Employees and Contributors giving the common sense of responsibility in reaching all the Company goals.

index

FM Filters

FM Combiners

Coaxial Components

FM FILTERS

FM COMBINERS

COAXIAL COMPONENTS

CFM2-0.15

CFM3-0.15

CFM2-0.5

CFM3-0.5

CFM4-0.5

CFM2-1

CFM3-1

CFM4-1

CFM2-2.5

CFM3-2.5

CFM4-2.5

CFM2-5

CFM3-5

CFM4-5

CFM2-10

CFM3-10

CFM4-10

CFM2-20

CFM3-20

CFM4-20

26 5

FM FILTERS

FM Filters

FM FILTERS

Specifications are subject to change without prior notice

CFM2-0.15

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.15 kW bandpass filter 2 pole / 100 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

CFM2-0.15 87.5 ÷ 108 MHz 50 ohm ≥ 26 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 0.15 kW NF -10 ÷ +45 °C Aluminium, Plated copper and brass Iron (support) Silver plated brass Deoxidized aluminium Teflon, rexolite Painted Ral 9005 Nickel plating 6.6 kg

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.58 0.68

98 0.59 0.69

108 0.60 0.70

Specifications are subject to change without prior notice

CFM3-0.15

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.15 kW bandpass filter 3 pole / 100 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

CFM3-0.15 87.5 ÷ 108 MHz 50 ohm ≥ 26 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 0.15 kW NF -10 ÷ +45 °C Aluminium, Plated copper and brass Iron (support) Silver plated brass Deoxidized aluminium Teflon, rexolite Painted Ral 9005 Nickel plating 8.3 kg

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.6 ± 1.2 ± 0.8

87.5 0.68 1.08 1.28

98 0.69 1.09 1.29

108 0.70 1.10 1.30

Specifications are subject to change without prior notice

CFM2-0.5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.5 kW bandpass filter 2 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM2-0.5 87.5 ÷ 108 MHz 50 ohm ≥ 28 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 0.5 kW NF -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 11 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.34 0.42

98 0.37 0.45

108 0.40 0.48

Specifications are subject to change without prior notice

CFM3-0.5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.5 kW bandpass filter 3 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM3-0.5 87.5 ÷ 108 MHz 50 ohm ≥ 28 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 0.5 kW NF -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 20 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.6 ± 1.2 ± 0.8

87.5 0.42 0.61 0.80

98 0.44 0.63 0.83

108 0.46 0.65 0.85

Specifications are subject to change without prior notice

CFM4-0.5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.5 kW bandpass filter 4 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM4-0.5 87.5 ÷ 108 MHz 50 ohm ≥ 28 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz See table below 0.5 kW NF -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 26 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.0 ± 0.8 ± 0.6

87.5 0.69 0.82 0.98

98 0.71 0.84 1.00

108 0.72 0.86 1.10

Specifications are subject to change without prior notice

CFM2-1

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 1 kW bandpass filter 2 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM2-1 87.5 ÷ 108 MHz 50 ohm ≥ 28 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 1 kW 7/8” EIA -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 11.5 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.34 0.42

98 0.37 0.45

108 0.40 0.48

Specifications are subject to change without prior notice

CFM3-1

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 1 kW bandpass filter 3 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM3-1 87.5 ÷ 108 MHz 50 ohm ≥ 28 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 1 kW 7/8” EIA -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 20 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.6 ± 1.2 ± 0.8

87.5 0.42 0.61 0.80

98 0.44 0.63 0.83

108 0.46 0.65 0.85

Specifications are subject to change without prior notice

CFM4-1

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 1 kW bandpass filter 4 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM4-1 87.5 ÷ 108 MHz 50 ohm ≥ 28 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz See table below 1 kW 7/8” EIA -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 27 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.0 ± 0.8 ± 0.6

87.5 0.69 0.82 0.98

98 0.71 0.84 1.00

108 0.72 0.86 1.10

Specifications are subject to change without prior notice

CFM2-2.5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 2.5 kW bandpass filter 2 pole / 200 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM2-2.5 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 2.5 kW 1-5/8” Unfl, 7/8” EIA -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Teflon Painted Ral 9005 Nickel plating 17.5 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.24 0.29

98 0.29 0.34

108 0.30 0.35

Specifications are subject to change without prior notice

CFM3-2.5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 2.5 kW bandpass filter 3 pole / 200 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM3-2.5 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 2.5 kW 1-5/8” Unfl, 7/8” EIA -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Teflon Painted Ral 9005 Nickel plating 25 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.6 ± 1.2 ± 0.8

87.5 0.25 0.33 0.47

98 0.27 0.35 0.51

108 0.29 0.37 0.55

Specifications are subject to change without prior notice

CFM4-2.5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 2.5 kW bandpass filter 4 pole / 200 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM4-2.5 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz See table below 2.5 kW 1-5/8” Unfl, 7/8” EIA -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Teflon Painted Ral 9005 Nickel plating 33.5 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.0 ± 0.8 ± 0.6

87.5 0.45 0.53 0.68

98 0.46 0.55 0.70

108 0.47 0.56 0.71

Specifications are subject to change without prior notice

CFM2-5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 5 kW bandpass filter 2 pole / 350 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM2-5 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 5 kW 1-5/8” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Plated invar (support) Teflon Painted Ral 9005 Nickel plating 49 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.18 0.21

98 0.19 0.22

108 0.20 0.23

Specifications are subject to change without prior notice

CFM3-5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 5 kW bandpass filter 3 pole / 350 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM3-5 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 5 kW 1-5/8” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Teflon Painted Ral 9005 Nickel plating 70 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.6 ± 1.2 ± 0.8

87.5 0.24 0.28 0.40

98 0.27 0.31 0.44

108 0.28 0.32 0.45

Specifications are subject to change without prior notice

CFM4-5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 5 kW bandpass filter 4 pole / 350 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM4-5 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz See table below 5 kW 1-5/8” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Teflon Painted Ral 9005 Nickel plating 94 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.0 ± 0.8 ± 0.6

87.5 0.34 0.39 0.47

98 0.36 0.41 0.49

108 0.38 0.42 0.50

Specifications are subject to change without prior notice

CFM2-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 2 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

CFM2-10 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 10 kW 1-5/8” Unfl, 3-1/8” Unfl, 4-1/2” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Deoxidized aluminium Teflon Painted Ral 9005 Nickel plating 80 kg

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.12 0.14

98 0.125 0.145

108 0.13 0.15

Specifications are subject to change without prior notice

CFM3-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 3 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

CFM3-10 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 10 kW 1-5/8” Unfl, 3-1/8” Unfl, 4-1/2” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Deoxidized aluminium Teflon Painted Ral 9005 Nickel plating 115 kg

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.6 ± 1.2 ± 0.8

87.5 0.14 0.19 0.25

98 0.15 0.20 0.26

108 0.16 0.21 0.27

Specifications are subject to change without prior notice

CFM4-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 4 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

CFM4-10 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz See table below 10 kW 1-5/8” Unfl, 3-1/8” Unfl, 4-1/2” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Deoxidized aluminium Teflon Painted Ral 9005 Nickel plating 153 kg

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.0 ± 0.8 ± 0.6

87.5 0.25 0.30 0.36

98 0.26 0.31 0.38

108 0.27 0.33 0.41

Specifications are subject to change without prior notice

CFM2-20

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 20 kW bandpass filter 2 pole / 750 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM2-20 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz See table below 20 kW 3-1/8” Unfl, 6-1/8” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Deoxidized aluminium Teflon Painted Ral 9005 Nickel plating 175 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 2.0 ± 1.6

87.5 0.08 0.10

98 0.085 0.105

108 0.09 0.11

Specifications are subject to change without prior notice

CFM3-20

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 20 kW bandpass filter 3 pole / 750 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM3-20 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz See table below 20 kW 3-1/8” Unfl, 6-1/8” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Deoxidized aluminium Teflon Painted Ral 9005 Nickel plating 266 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz) ± 1.6 ± 1.2 ± 0.8

87.5 0.08 0.11 0.16

98 0.085 0.115 0.165

108 0.09 0.12 0.17

Specifications are subject to change without prior notice

CFM4-20

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 20 kW bandpass filter 4 pole / 750 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY (Stop band atten. 20dB) INSERTION LOSS MAX POWER CONNECTORS OPERATING TEMPERATURE RANGE MATERIALS - External parts

CFM4-20 87.5 ÷ 108 MHz 50 ohm ≥ 32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz See table below 20 kW 3-1/8” Unfl, 6-1/8” Unfl -10 ÷ +45 °C Aluminium, brass Iron (support) Silver plated brass Silver plated aluminium Plated invar (support) Deoxidized aluminium Teflon Painted Ral 9005 Nickel plating 360 kg

- Inner conductor

- Insulating materials EXTERNAL FINISHING WEIGHT

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz)

± 1.0 ± 0.8 ± 0.6

87.5 0.15 0.19 0.25

98 0.155 0.200 0.260

108 0.16 0.21 0.27

Specifications are subject to change without prior notice

Functioning principles of FM combiners

FM Star Type Combiners

UC/FM/LB2-4

UC/FM/LB3-4

UC/FM/LB2-5

UC/FM/LB3-5

UC/FM/LB2-10

UC/FM/LB3-10

UC/FM/LB4-10

UC/FM/LB2-20

UC/FM/LB3-20

UC/FM/LB4-20

UC/FM/LB2-40

UC/FM/LB3-40

FM COMBINERS

FM Combiners

FM COMBINERS

COAXIAL COMPONENTS ATV COMBINERS

FM FILTERS

COAXIAL COMPONENTS

Functioning principles of FM combiners

The signal generated by a transmitter on frequency f1 is delivered to port 1 (Narrow Band input) of coupler A1 (3 dB coupler) which splits the power in two halves on to ports 2 and 3, whilst virtually no power goes to port 4 which is the absorber load port. The two half power signals flow through the band pass filters BP1 and BP2, both tuned on f1, and reach ports 2 and 3 of 3dB coupler A2. Due to the phase difference between the two half signals, they get summed up on A2 (3 dB coupler), so that the whole f1 transmitter power (less NB input loss) gets to port 4 of A2, which actually is the combiner output. Similarly, the signal from another transmitter (f2), is delivered to port 1 of coupler A2 (3 dB coupler). The signal is split in two by the 3 dB coupler and flows toward the band pass filters. Being these tuned on f1, f2 signal is rejected by the band pass filters, and as per the previous case, the phase difference between ports 2 and 3 of the 3 dB coupler allows the summed up half power f2 signals to get to the combiner output (port 4). By doing so both transmitter signals are summed up at the output and kept separated (isolation) by means of the 3 dB coupler directivity as well as by the selectivity of the band pass filters. In the event that a very high level of isolation is required in both directions (WB to NB and viceversa), it is recommended to add a band pass filter to the wide Band input or to add another combiner module to the same input so that there will be two Narrow Band inputs plus a “spare” wide Band input, winch can be used for emergency situations (any frequency of the FM spectrum can be operated through the WB input), or to add further modules in order to assemble multiplexers (n+1) with no limitations except of the power capacity of the last 3 dB coupler.

Tx 1 1  A1 (f1) 3

BP 1

(f1)

Antenna



SCHEMATIC DIAGRAM

Tx 2 1  A2 (f2)

f1 + f2

BP 2

FUNCTIONING PRINCIPLES OF FM STAR TYPE COMBINER The Star Type Combiner basically consists of parallel connecting several transmitters to a single antenna system through suitable bandpass filters, each one tuned on the transmitter frequency to which it is connected. The parallel connection is obtained by means of coaxial lines of critical lenght. The RF power generated by TX1 (ch1) passes through filter BP1 to the star centre C to which the antenna is connected. In order to transfer to the antenna the total power from TX1,the short circuit of TX2 at TX1 frequency , must be converted to an open circuit at the star junction centre by means of L2. The same applies for transferring power from transmitters TX2 and the related conversion lines L1, L2.

SCHEMATIC DIAGRAM ANTENNA

⇑ TX1 (f1)

f1 + f2 L2

TX2 (f2)

↓

BP1

BP2

FM COMBINERS

FUNCTIONING PRINCIPLES OF FM DIRECTIONAL FILTER TYPE COMBINERS

FM STAR TYPE COMBINERS

FEATURES 2 or 3 pole band pass filters temperature compensated adjustable selectivity

FM COMBINERS GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C See table

Specifications are subject to change without prior notice

FM COMBINERS

FM STAR TYPE COMBINERS

ELECTRICAL DATA FREQUENCIES TYPE SPACING (MHz) DPLX UC/FM/ST2-0.25 DPLX UC/FM/ST3-0.25 DPLX UC/FM/ST2-2.5 DPLX UC/FM/ST3-2.5 DPLX UC/FM/ST2-5 DPLX UC/FM/ST3-5 DPLX UC/FM/ST2-10 DPLX UC/FM/ST3-10 DPLX UC/FM/ST2-20 DPLX UC/FM/ST3-20 TPLX UC/FM/ST2-0.25 TPLX UC/FM/ST3-0.25 TPLX UC/FM/ST2-2.5 TPLX UC/FM/ST3-2.5 TPLX UC/FM/ST2-5 TPLX UC/FM/ST3-5 TPLX UC/FM/ST2-10 TPLX UC/FM/ST3-10 TPLX UC/FM/ST2-20 TPLX UC/FM/ST3-20

≥ 2.5 ≥ 1.6 ≥2 ≥ 1.2 ≥2 ≥ 1.2 ≥2 ≥ 1.2 ≥2 ≥ 1.2 ≥ 2.5 ≥ 1.6 ≥2 ≥ 1.2 ≥2 ≥ 1.2 ≥2 ≥ 1.2 ≥2 ≥ 1.2

MAX POWER PER CHANNEL (kW)

V.SW.R INPUT at fo

ISOLATION BETWEEN FREQ. (dB)

INSERTION LOSSES at fo (dB)

0.25 0.25 2.5 2.5 5 5 10 10 20 20 0.25 0.25 2.5 2.5 5 5 10 10 20 20

≤ 1.15 ≤ 1.15 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.15 ≤ 1.15 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06 ≤ 1.06

≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

≤ 0.8 ≤ 1.2 ≤ 0.4 ≤ 0.6 ≤ 0.3 ≤ 0.5 ≤ 0.25 ≤ 0.35 ≤ 0.2 ≤ 0.25 ≤ 0.85 ≤ 1.25 ≤ 0.45 ≤ 0.65 ≤ 0.35 ≤ 0.55 ≤ 0.3 ≤ 0.4 ≤ 0.25 ≤ 0.3

CONNECTORS INPUT / OUTPUT NF / NF NF / NF 7/8” EIA / 7/8” EIA 7/8” EIA / 7/8” EIA 1-5/8” UNFL / 1-5/8” UNFL 1-5/8” UNFL / 1-5/8” UNFL 3-1/8” UNFL / 3-1/8” UNFL 3-1/8” UNFL / 3-1/8” UNFL 3-1/8” UNFL / 3-1/8” UNFL 3-1/8” UNFL / 3-1/8” UNFL NF / NF NF / NF 7/8” EIA / 1-5/8” EIA 7/8” EIA / 1-5/8” EIA 1-5/8” UNFL / 1-5/8” UNFL 1-5/8” UNFL / 1-5/8” UNFL 3-1/8” UNFL / 3-1/8” UNFL 3-1/8” UNFL / 3-1/8” UNFL 3-1/8” UNFL / 4-1/2” UNFL 3-1/8” UNFL / 4-1/2” UNFL

Specifications are subject to change without prior notice

WEIGHT (Kg )

DIMENSIONS LxWxH mm

20 25 45 70 125 175 210 300 430 610 23 28 85 110 180 235 195 265 630 910

250x208x800 260x208x800 446x536x1218 648x536x1218 879x796x1600 879x1162x1600 1068x1227x1720 1068x1570x1720 1503x1558x1720 1503x2255x1720 366x208x800 366x308x800 800x800x1400 1000x1000x1400 1326x796x1700 1326x1162x1700 1068x1868x1720 1570x1868x1720 1503x2310x1720 2310x2255x1720

UC/FM/LB2-4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 200 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-4 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input - narrowband input (at carrier f0) ≥ 30 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.35 dB NB input with freq. spacing ±1.6 MHz ≤ 0.40 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 4 kW - Wideband input 5 kW - Total output 5.5 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input 7/8” EIA OUTPUT PORT 48 kg WEIGHT

Specifications are subject to change without prior notice

UC/FM/LB3-4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 3 pole / 200 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-4 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 30 dB - narrowband input (at carrier f0) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.34 dB NB input with freq. spacing ±1.2 MHz ≤ 0.42 dB NB input with freq. spacing ±0.8 MHz ≤ 0.60 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 4 kW - Wideband input 5 kW - Total output 5.5 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input OUTPUT PORT 7/8” EIA WEIGHT 75 kg

Specifications are subject to change without prior notice

UC/FM/LB2-5

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 200 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-5 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input - narrowband input (at carrier f0) ≥ 30 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.35 dB NB input with freq. spacing ±1.6 MHz ≤ 0.40 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 5 kW - Wideband input 10 kW - Total output 11 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS 1-5/8” UNFL - Narrowband input 1-5/8” UNFL - Wideband input 1-5/8” UNFL OUTPUT PORT 53 kg WEIGHT

Specifications are subject to change without prior notice

UC/FM/LB3-5

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 3 pole / 200 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-5 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 30 dB - narrowband input (at carrier f0) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.34 dB NB input with freq. spacing ±1.2 MHz ≤ 0.42 dB NB input with freq. spacing ±0.8 MHz ≤ 0.60 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 5 kW - Wideband input 10 kW - Total output 11 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS 1-5/8” UNFL - Narrowband input 1-5/8” UNFL - Wideband input 1-5/8” UNFL OUTPUT PORT 80 kg WEIGHT

Specifications are subject to change without prior notice

UC/FM/LB2-10

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 350 mm or 500 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-10/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier f0) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.27 dB NB input with freq. spacing ±1.6 MHz ≤ 0.30 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 10 kW - Wideband input 15 kW - Total output 25 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS 1-5/8” Unfl. - Narrowband input 1-5/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 175 kg WEIGHT

UC/FM/LB2-10/B

UC/FM/LB2-10/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.27 dB ≤ 0.30 dB ≤ 0.10 dB

≤ 0.18 dB ≤ 0.20 dB ≤ 0.10 dB

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz

10 kW 15 kW 25 kW -10 ÷ +45° C

10 kW 30 kW 40 kW -10 ÷ +45° C

1-5/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. 165 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 230 kg

Specifications are subject to change without prior notice

UC/FM/LB2-10

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB2-10/B

UC/FM/LB2-10/C

FM COMBINERS

UC/FM/LB2-10/A

Specifications are subject to change without prior notice

UC/FM/LB3-10

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 3 pole / 350 mm or 500 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-10/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo)

UC/FM/LB3-10/B

UC/FM/LB3-10/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.37 dB ≤ 0.50 dB ≤ 0.10 dB ≤ 0.20 dB

≤ 0.19 dB ≤ 0.24 dB ≤ 0.30 dB ≤ 0.10 dB ≤ 0.15 dB

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz

10 kW 15 kW 25 kW -10 ÷ +45° C

10 kW 30 kW 40 kW -10 ÷ +45° C

1-5/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. 245 kg

1-5/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. 235 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 310 kg

NB input with freq. spacing ±1.6 MHz NB input with freq. spacing ±1.2 MHz NB input with freq. spacing ±0.8 MHz WB input WB input (0.8MHz freq. spacing)

ISOLATION (at carrier fo) - Narrowband input to wideband input - Wideband input to narrowband input

GROUP DELAY (With 0.8 MHz frequency spacing)

MAX POWER RATINGS - Narrowband input - Wideband input - Total output

OPERATING TEMPERATURE RANGE INPUT PORTS - Narrowband input - Wideband input

OUTPUT PORT WEIGHT

Specifications are subject to change without prior notice

UC/FM/LB3-10

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB3-10/B

Picture refers to UC/FM/LB3-10/A

Specifications are subject to change without prior notice

UC/FM/LB3-10/C

FM COMBINERS

UC/FM/LB3-10/A

UC/FM/LB4-10

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 4 pole / 350 mm or 500 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB4-10/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo)

UC/FM/LB4-10/B

UC/FM/LB4-10/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.47 dB ≤ 0.55 dB ≤ 0.10 dB ≤ 0.20 dB

≤ 0.30 dB ≤ 0.36 dB ≤ 0.44 dB ≤ 0.10 dB ≤ 0.20 dB

≥ 32 dB ≥ 50 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz

10 kW 15 kW 25 kW -10 ÷ +45° C

10 kW 30 kW 40 kW -10 ÷ +45° C

1-5/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. 235 kg

1-5/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. 245 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 380 kg

NB input with freq. spacing ±1.0 MHz NB input with freq. spacing ±0.8 MHz NB input with freq. spacing ±0.6 MHz WB input WB input (0.6MHz freq. spacing)

ISOLATION (at carrier fo) - Narrowband input to wideband input - Wideband input to narrowband input

GROUP DELAY (With 0.6 MHz frequency spacing)

MAX POWER RATINGS - Narrowband input - Wideband input - Total output

OPERATING TEMPERATURE RANGE INPUT PORTS - Narrowband input - Wideband input

OUTPUT PORT WEIGHT

Specifications are subject to change without prior notice

UC/FM/LB4-10

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB4-10/B

Picture refers to UC/FM/LB4-10/C

Specifications are subject to change without prior notice

UC/FM/LB4-10/C

FM COMBINERS

UC/FM/LB4-10/A

UC/FM/LB2-20

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 500 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-20/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input - narrowband input (at carrier f0) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.18 dB NB input with freq. spacing ±1.6 MHz ≤ 0.20 dB ≤ 0.10 dB WB input ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 20 kW - Wideband input 35 kW - Total output 40 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS - Narrowband input 3-1/8” Unfl. 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 235 kg WEIGHT

UC/FM/LB2-20/B

UC/FM/LB2-20/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.18 dB ≤ 0.20 dB ≤ 0.10 dB

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz

20 kW 50 kW 60 kW -10 ÷ +45° C

20 kW 70 kW 80 kW -10 ÷ +45° C

3-1/8” Unfl. 4-1/2” Unfl. 4-1/2” Unfl. 290 kg

3-1/8” Unfl. 6-1/8” Unfl. 6-1/8” Unfl. 300 kg

Specifications are subject to change without prior notice

UC/FM/LB2-20

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB2-20/B

UC/FM/LB2-20/C

FM COMBINERS

UC/FM/LB2-20/A

Specifications are subject to change without prior notice

UC/FM/LB3-20

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 3 pole / 500 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-20/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.19 dB NB input with freq. spacing ±1.2 MHz ≤ 0.24 dB NB input with freq. spacing ±0.8 MHz ≤ 0.30 dB WB input ≤ 0.10 dB WB input (0.8MHz freq. spacing) ≤ 0.15 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 20 kW - Wideband input 35 kW - Total output 40 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS 3-1/8” Unfl. - Narrowband input 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 315 kg WEIGHT

UC/FM/LB3-20/B

UC/FM/LB3-20/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.19 dB ≤ 0.24 dB ≤ 0.30 dB ≤ 0.10 dB ≤ 0.15 dB

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz

20 kW 50 kW 60 kW -10 ÷ +45° C

20 kW 70 kW 80 kW -10 ÷ +45° C

3-1/8” Unfl. 4-1/2” Unfl. 4-1/2” Unfl. 350 kg

3-1/8” Unfl. 6-1/8” Unfl. 6-1/8” Unfl. 365 kg

Specifications are subject to change without prior notice

UC/FM/LB3-20

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB3-20/B

UC/FM/LB3-20/C

FM COMBINERS

UC/FM/LB3-20/A

Specifications are subject to change without prior notice

UC/FM/LB4-20

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 4 pole / 500 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB4-20/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.0 MHz ≤ 0.30 dB NB input with freq. spacing ±0.8 MHz ≤ 0.36 dB NB input with freq. spacing ±0.6 MHz ≤ 0.44 dB WB input ≤ 0.10 dB WB input (0.6MHz freq. spacing) ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±50 ns at fo ±100 kHz (With 0.6 MHz frequency spacing) ≤ ±100 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 20 kW - Wideband input 35 kW - Total output 40 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS - Narrowband input 3-1/8” Unfl. 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 375 kg WEIGHT

UC/FM/LB4-20/B

UC/FM/LB4-20/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.30 dB ≤ 0.36 dB ≤ 0.44 dB ≤ 0.10 dB ≤ 0.20 dB

≥ 32 dB ≥ 50 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz

20 kW 50 kW 60 kW -10 ÷ +45° C

20 kW 70 kW 80 kW -10 ÷ +45° C

3-1/8” Unfl. 4-1/2” Unfl. 4-1/2” Unfl. 430 kg

3-1/8” Unfl. 6-1/8” Unfl. 6-1/8” Unfl. 440 kg

Specifications are subject to change without prior notice

UC/FM/LB4-20

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB4-20/B

Picture refers to UC/FM/LB4-20/A

Specifications are subject to change without prior notice

UC/FM/LB4-20/C

FM COMBINERS

UC/FM/LB4-20/A

UC/FM/LB2-40

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 750 mm adjustable selectivity temperature compensated

FM COMBINERS ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-40 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input - narrowband input (at carrier f0) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.14 dB NB input with freq. spacing ±1.6 MHz ≤ 0.16 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 40 kW - Wideband input 140 kW - Total output 160 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS - Narrowband input 3-1/8” UNFL 6-1/8” UNFL - Wideband input 6-1/8” UNFL OUTPUT PORT 530 kg WEIGHT

Specifications are subject to change without prior notice

UC/FM/LB3-40

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 3 pole / 750 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-40 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 32 dB - narrowband input (at carrier f0) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.15 dB NB input with freq. spacing ±1.2 MHz ≤ 0.18 dB NB input with freq. spacing ±0.8 MHz ≤ 0.23 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.15 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS - Narrowband input 40 kW - Wideband input 140 kW - Total output 160 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C INPUT PORTS - Narrowband input 3-1/8” UNFL 6-1/8” UNFL - Wideband input 6-1/8” UNFL OUTPUT PORT 705 kg WEIGHT

Specifications are subject to change without prior notice

COAXIAL COMPONENTS COAXIAL COMPONENTS ATV COMBINERS

FM FILTERS

Rigid Lines

Fine Matchers

Directional Couplers

Coaxial Elbows

Coaxial Adaptors

FM 3db Couplers

UHF 3db Couplers

Coaxials Accessories

Coaxial Loads

COAXIAL COMPONENTS

Coaxial Components

FM FILTERS COAXIAL COMPONENTS ATV COMBINERS

COAXIAL COMPONENTS Specifications are subject to change without prior notice

RIGID LINES

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER LENGHT WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Outer conductor - Inner conductor - Insulating material Terminated type

COAXIAL COMPONENTS

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table 0.1 ÷ 4 m (typical 4 m) See table -40 ÷ +70° C Polished Copper Polished Copper Teflon EIA Flanged / EIA Unflanged

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

4-1/2” 3-1/8”

20 10

1-5/8”

1 0.5

0.2

VHF-BI

100

200

VHF-BIII

500

UHF

1 0 0 0 (MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

RIGID LINES

EIA UNFLANGED RIGID LINES TYPE

COAXIAL COMPONENTS

1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B) 41.27 / 38.78 79.4 / 76.88 106 / 103 155.6 / 151.9

Inner conductor (C/D)

16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 66 / 64

11 18 18 26

WEIGHT (kg/m) 1.83 3.75 5.6 9.76

EIA FLANGED RIGID LINES TYPE 1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B)

Inner conductor (C/D)

41.27 / 38.78 79.4 / 76.88 106 / 103 155.6 / 151.9

16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 66 / 64

89 128 159 206

WEIGHT (kg/m) 2.7 5.2 7.9 14.5

Specifications are subject to change without prior notice

FINE MATCHERS

See table 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300 hPa (300 mBar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

MAX MEAN POWER (kW) 300 200 10 0

6-1/8” 5”

4-1/2” 3-1/8”

20 10

1-5/8”

1 0.5

0.2

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature = 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature102°

FINE MATCHERS

figure “1”

COAXIAL COMPONENTS TYPE

FREQUENCY RANGE (MHz)

CONNECTORS

FIGURE

FMBP1-03 FMBP-03 FMBP-04 FMBPFM-03 FMBPFM-07 FMFM-03 FMFM-04 FMFM-06 FMFM-07 FMBT-03 FMBT-04 FMTV-03 FMTV-04 FMTV-06/A FMTV-07

47 ÷ 57 66 ÷ 88 66 ÷ 88 76 ÷ 108 76 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 174 ÷ 230 174 ÷ 230 470 ÷ 860 470 ÷ 860 470 ÷ 680 470 ÷ 860

1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

1 1 1 1 1 1 1 1 1 1 1 2 2 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

1442 980 950 816 816 764 764 764 764 370 370 354 390 580 442

127.5 127.5 208.7 127.5 264.5 127.5 208.7 363 264.5 127.5 208.7 121.2 183.5 363 233.5

89 89 128 89 159 89 128 206 159 89 128 89 128 206 159

6.5 6 7.5 5 10 4 6.5 17.5 9 3.2 4 5 7.4 15 10.5

Specifications are subject to change without prior notice

figure “2”

DIRECTIONAL COUPLERS

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below ≥ 40 dB See table below -40 ÷ +70° C See table below NF See table below Typical operating pressure 300 hPa (300 mBar) Nickel plated brass, polished brass Silver plated brass Teflon Painted Ral 7001

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING FACTOR DIRECTIVITY MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS PROBE CONNECTORS WEIGHT PESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING *only for waterproff and protection type

MAX MEAN POWER (kW) 300 200 100

6-1/8”

4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature = 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature102°

DIRECTIONAL COUPLERS

figure “1”

figure “2” COAXIAL COMPONENTS TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/W ADR-02/P ADR-02/W ADR-03/P ADR-03/W ADR-04/P ADR-04/W ADR-04/3T ADR-06/P ADR-06/W ADR-07/W ADR-07/3T ADR-08/P ADR-08/W

NF 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 6-1/8” EIA 7/16 F 7/16 M 4-1/2” EIA 4-1/2” EIA

2 2 2 2 2 2 2 3 2 2 2 3 2 2

1 1 1 1 1 2 2 2 2 2 1 1 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

177 200 200 198 198 246 246 304 281 281 180 238 246 246

149 172 148 172 149 195 172 272 276 253 149 149 229 206

45 58 58 89 89 128 128 128 206 206 45 45 159 159

2.5 2.8 2.6 2.4 2.2 4.5 4 5 10 9.6 2.5 3.2 6 5.5

Note: F = female / M = male

WATER PROOF

PROTECTION

YES YES YES YES YES YES YES NO YES YES YES NO YES YES

NO YES NO YES NO YES NO NO YES NO NO NO YES NO

COUPLING FACTOR (dB) VHF UHF FM min/max min/max min/max -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -67/-62 -61/-57 -49/-46 -67/-62 -61/-57 -49/-46 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -64/-59 -58/-54 -43/-46 -64/-59 -58/-54 -43/-46

COAXIAL ELBOWS

0.1 ÷ 860 MHz ** 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING * only for flanged types ** up to 790 MHz for 6-1/8”

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

4-1/2” 3-1/8”

20 10

1-5/8”

1 0.5

0.2

VHF-BI

100

200

VHF-BIII

500

UHF

1 0 0 0 (MHz)

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

COAXIAL ELBOWS

figure “1”

figure “2” COAXIAL COMPONENTS

figure “3” TYPE

GMT-01 GMT-01/CP* GMT-03 GMT-04 GMT-05 GMT-06 GMT-07 GMT-10 GMT-11 GMT-12 GMT-15 GMT-16

CONNECTORS

7/8” EIA 7/8” EIA 1-5/8” EIA M-F 1-5/8” EIA 3-1/8” EIA 4-1/8” FL 6-1/8” EIA 4-1/2” EIA 1-5/8” UNFL M 3-1/8” UNFL M 6-1/8” UNFL M 4-1/2” UNFL M

DIMENSIONS

FIGURE

2 4 3 2 2 2 2 2 1 1 1 1

WEIGHT

A (mm)

B (mm)

C (mm)

D (mm)

(kg)

55 55 65 65 85 100 130 100 38.4 59.5 89.5 79.5

84 84 110 110 149 180 233 179.5 60 89 140 109

58 58 89 89 128 160 206 159 48 90 170 120

149 98.4 149 256.5 184.3

0.62 0.72 1.4 1.3 2.9 4 9.1 4.4 0.4 2.1 6.7 3.5

Note: F = female / M = male * with Capacitive Probe Specifications are subject to change without prior notice

figure “4”

COAXIAL ADAPTORS

COAXIAL COMPONENTS

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Typical operating pressure 300 hPa (300 mbar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

* only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

4-1/2” 3-1/8”

20 10

1-5/8”

1 0.5

0.2

VHF-BI

100

200

VHF-BIII

500

UHF

1 0 0 0 (MHz)

Note: Power handling is limited by the smallest size Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

COAXIAL ADAPTORS

figure “1”

figure “2”

FLANGED COAXIAL ADAPTORS TYPE

COAXIAL COMPONENTS

TRS-01 TRS-02 TRS-03 TRS-04 TRS-05 TRS-06 TRS-07 TRS-08 TRS-11 TRS-12 TRS-13 TRS-14 TRS-15 TRS-16 TRS-17 TRS-19 TRS-22 TRS-26 TRS-27 TRS-36 TRS-37 TRS-39 TRS-40 TRS-41 TRS-42 TRS-44 TRS-45 TRS-46

CONNECTORS

7/16 F 7/16 M 7/8” EIA M 7/8” EIA M 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA M 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 3-1/8” EIA 4-1/2” EIA 6-1/8” EIA 4-1/2” EIA 4-1/2” EIA 1-5/8” EIA M 6-1/8” EIA 4-1/2” EIA 6-1/8” EIA 3-1/8” EIA 1-5/8” EIA

FIGURE

NF NF NF NM NF NM 7/16 F 7/16 M NF NM 7/16 F 7/16 M 7/8” EIA 7/8” EIA 1-5/8” EIA NF 3-1/8” EIA 7/8” EIA 4-1/8” FL M NF 3-1/8” EIA NF 7/8” EIA 4-1/2” EIA 3-1/8” EIA 7/16 F 7/16 F Dezifix D

6 6 5 5 4 4 3 3 4 4 4 4 1 2 1 4 1 1 2 4 1 4 2 1 1 4 4 3

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

45 59 42.5 39 83.5 80 63.5 66 123.5 120 111 125 83.5 60 110 162 150 120 65 207 95 150 21 150 117 194.5 149.5 138.5

32 35 58 58 58 58 58 58 89 89 89 89 89 89 128 128 150 128 159 206 159 159 89 206 159 206 128 98

0.14 0.19 0.3 0.32 0.3 0.36 0.2 0.28 1 1 1 1 0.77 0.85 1.5 3 3.8 1.3 2.6 6.4 3 3.5 0.65 4.5 2.5 4.8 3 2.6

Note: F = female / M = male Specifications are subject to change without prior notice

figure “3”

figure “4”

figure “5”

figure “6”

COAXIAL ADAPTORS

figure “8”

UNFLANGED COAXIAL ADAPTORS TYPE

TRS-11/U TRS-12/U TRS-13/U TRS-14/U TRS-16/U TRS-17/U TRS-19/U TRS-22/U TRS-26/U TRS-27/U TRS-38/U TRS-41/U TRS-42/U TRS-43/U TRS-47/U TRS-48/U

CONNECTORS

1-5/8” UNFL M 1-5/8” UNFL M 1-5/8” UNFL M 1-5/8” UNFL M 1-5/8” UNFL M 3-1/8” UNFL M 3-1/8” UNFL M 6-1/8” UNFL M 3-1/8” UNFL M 4-1/2” UNFL M 6-1/8” UNFL M 6-1/8” UNFL M 4-1/2” UNFL M 4-1/2” UNFL M 4-1/2” UNFL M 4-1/2” UNFL M

FIGURE

NF NM 7/16 F 7/16 M 7/8” EIA 1-5/8” UNFL M NF 3-1/8” UNFL M 7/8” EIA 4-1/8 FL 1-5/8” UNFL M 4-1/2” UNFL M 3-1/8” UNFL M 4-1/8” UNFL M 7/8” EIA 4-1/2” EIA

9 9 9 9 8 7 9 7 8 8 7 7 7 7 8 8

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

103 99.5 56.4 104 115 124.5 104 177 101 45 152.5 153 145 119 103 149

57.5 57.5 45 57.5 58 100 100 177 100 159 177 177 127 127 127 159

0.3 0.33 0.25 0.35 0.5 1 1 3.5 1 1.2 3 3.3 1.8 1.8 1.4 2

Note: F = female / M = male Specifications are subject to change without prior notice

figure “9”

COAXIAL COMPONENTS

figure “7”

FM 3dB COUPLERS

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING ISOLATION PHASE DIFFERENCE BETWEEN THE OUTPUTS MAX MEAN POWER * OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB 3 ± 0.3dB ≥ 32 dB 90° ± 1° See table below -40 ÷ +70° C See table below See table below No Polished copper, polished brass, deoxided aluminium Silver plated brass, silver plated aluminium silver plated phosphate bronze Teflon Painted Ral 7001, Nickel plating

- Insulator EXTERNAL FINISHING

figure “1”

* ambient temperature 40°C

TYPE

IFM-02 IFM-03/U IFM-04/U IFM-06/U IFM-07/U

CONNECTORS

NF 7/16 F 7/8” EIA 1-5/8” UNFL F 3-1/8” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F

FIGURE

DIMENSIONS A (mm)

B (mm)

C (mm)

771

880

126

2 2 2 2

753 753 753 753

826 874 1062 1020

186 230 370 270

D (mm) 38 38 58 103 130 240 180

WEIGHT MAX MEAN POWER (kW) (kg) 3.5 3.5 4.1 7.8 15 32 20

0.75 4 5 17 50 160 75

Note: F = female Specifications are subject to change without prior notice

figure “2”

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING ISOLATION PHASE DIFFERENCE BETWEEN THE OUTPUTS MAX MEAN POWER * OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

470 ÷ 870 MHz 50 ohm ≥ 30 dB 3 ± 0.3dB ≥ 30 dB 90° ± 1° See table below -40 ÷ +70° C See table below See table below Aluminium Silver plated brass Teflon Painted Ral 9005, Nickel plating

* ambient temperature 40°C

TYPE

ITV-01X ITV-02X ITV-03X ITV-04X ITV-05X

CONNECTORS

NF NF 7/16 F 7/8” EIA 1-5/8” UNFL 3-1/8” UNFL

FIGURE

1 1 1 1 1 1

DIMENSIONS A (mm)

B (mm)

C (mm)

D (mm)

112 134 134 151 169 240

138 172 172 222 240 346

78 94 97 177 232 272

30 80 80 96 110 118

WEIGHT MAX MEAN POWER (kW) (kg) 0.5 2 2 3 5 15

0.25 0.25 1.4 2 6 17

Note: F = female Specifications are subject to change without prior notice

figure “1”

COAXIAL COMPONENTS

UHF 3dB COUPLERS

COAXIAL ACCESSORIES

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Polished copper, polished brass Silver plated brass Teflon Nickel plating

MAX MEAN POWER (kW) 300 200 100

6-1/8” 5”

4-1/2” 3-1/8”

20 10

1-5/8”

1 0.5

0.2

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 102°C

COAXIAL ACCESSORIES

BULLETS TYPE

INN-01 INN-02 INN-03 INN-07 INN-05

CONNECTORS

7/8” 1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

59.8 78.4 100 10 125

20.65 41.75 81.2 105.3 154

0.02 0.1 0.3 0.6 1.3

GAS BARRIERS CONNECTORS

DIMENSIONS A (mm)

BAR-01 BAR-02 BAR-03 BAR-04 BAR-05

7/8” EIA M 1-5/8”EIA M 3-1/8”EIA M 4-1/2”EIA M 6-1/8”EIA M

30 30 35 40 40

WEIGHT

B (mm)

(kg)

58 89 128 159 206

0.6 1.3 2.7 4.3 8.5

CLAMP FLANGE TYPE

CONNECTORS

DIMENSIONS A (mm)

FLN-01 FLN-02 FLN-10 FLN-27

1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

41 42 64 35.5

WEIGHT

B (mm)

(kg)

89 128 206 159

0.5 0.9 2 1.2

STRAIGHT COUPLINGS TYPE

FLN-03 FLN-04 FLN-09 FLN-28

CONNECTORS

1-5/8”UNFL M 3-1/8”UNFL M 6-1/8”UNFL M 4-1/2”UNFL M

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

78.4 100 95 71.6

60 100 177 127

0.3 0.81 2.2 0.9

Note : M = male Specifications are subject to change without prior notice

COAXIAL COMPONENTS

TYPE

COAXIAL LOADS

FEATURES impedance 50 ohm up to 860 MHz VSWR optimization for UHF frequencies

COAXIAL COMPONENTS

TYPE CRC-01 CRC-02 CRC-03 CRC-04 CRC-05 CRC-06 CRC-07/F CRC-07/M CRC-08/F CRC-08/M CRC-09 CRC-10 CRC-11 CRC-12 CRC-13 CRC-14 CRC-15 CRC-16 CRC-17

CONNECTORS NM 7/16 M NM NM 7/16 M NM NF NM NF NM NF NF 7/16 F 7/16 F 7/16 F 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA

DIMENSIONS

FIGURE 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2

A (mm)

B (mm)

C (mm)

37 38 52 57 81 26 50 50 120 120 37 135 135 120 120 120 170 210 407

21 23 25 45 50 72 72 72 120 120 120 134 134 256 265 256 316 408 600

// // // // // 115 113 115 139 141 219 214 332 222 502 646 504 765 730

WEIGHT (kg)

MAX MEAN POWER (W)

0.05 0.13 0.13 0.14 0.3 0.29 0.54 0.54 1.4 1.4 1.0 3.0 4.2 8.2 15 24 21 40 47

1 6 10 12 25 30 50 50 100 100 150 250 400 600 1000 1500 2500 4000 10000

Specifications are subject to change without prior notice

figure “1”

figure “2”