TDG The D’souza Group Project notes: 1. Services drawings shall be read in conjunction with the specification, fire, lighting and engineering services documents. 2. All design discrepancies shall be referred to the design engineer for resolution before proceeding with work. 3. All finishings must be completed before project is signed off.
SARC 321 - Assignment 2 : Office Design Austin D’souza - 300327560
4. All materials and workmanship shall be in accordance with the NZBC (G1, D1) except where varied by the specification and/or drawings are specificed otherwise. 5. All wiring and other electrical and mechanical work must be done by authorised personel only. 6. This 20 storey building is located on 201 Wakefield Street, Wellington, NZ in which the design has the purpose of serving the function of an office. The gross floor area for a single floor is 1000m2. The approximate amount of people expected to occupy each floor is 83 ( 12m2 per person per floor)
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Fire excape sign CEO’s Office
Assistant office
B
Reception/ Foyer
Private Office
C 3418 827
700
816
600
Private Office
Wet Services Riser
500
Data Riser
5855
864
Toilet Exhaust Riser
Open Office Space
Data Room
Continues..
600
Private Office
Female WC
Data Riser - 1x0.5m Electrical Riser - 1.5x0.8m HVAC Riser - 2x1.5m Kitchenette Riser - 0.5x0.5m
Private Office
GF Retail Riser - 0.6x0.6m Carpark Riser - 0.6x0.6m Stair Pressureisation Riser - 1x0.5m Wet Services Riser - 0.6x0.6m Toilet Exhaust Riser - 0.7x0.7m
TDG
Continues..
SARC 321 - Office Design
North West Floor Plan - Level 2
Austin Dsouza - 300327560
Scale 1:100 - A101
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
A
Board Room
Reception/ Foyer
Board Room
Board Room
B Fire Riser
792 700
Stair Pressureisation Riser
1000
500
Private Office
Toilet Exhaust Riser
975
500
Wet Services Riser
Escape Stairs 3610
Storage
Male WC
Private Office Storage
864
C
120
864
81
Open Office Space
100
992
Continues..
Print Room Private Office
Closet
Data Riser - 1x0.5m Electrical Riser - 1.5x0.8m HVAC Riser - 2x1.5m Kitchenette Riser - 0.5x0.5m GF Retail Riser - 0.6x0.6m
Continues..
Carpark Riser - 0.6x0.6m Stair Pressureisation Riser - 1x0.5m Wet Services Riser - 0.6x0.6m Toilet Exhaust Riser - 0.7x0.7m
TDG
SARC 321 - Office Design
North East Floor Plan - Level 2
Austin Dsouza - 300327560
Scale 1:100 - A102
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Continues..
2196
Electrical Riser
Private Office
HVAC Riser
66
3288
Open Office Space
1737
D Wet Services Riser
800
2390
WC 899
Toilet Exhaust Riser
Private Office
2813
Private Office
Private Office
Private Office
Private Office
2102
Continues..
Private Office
E Data Riser - 1x0.5m Electrical Riser - 1.5x0.8m HVAC Riser - 2x1.5m Kitchenette Riser - 0.5x0.5m
2
1
3
GF Retail Riser - 0.6x0.6m Carpark Riser - 0.6x0.6m Stair Pressureisation Riser - 1x0.5m Wet Services Riser - 0.6x0.6m Toilet Exhaust Riser - 0.7x0.7m
TDG
SARC 321 - Office Design
South West Floor Plan - Level 2
Austin Dsouza - 300327560
Scale 1:100 - A103
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Continues..
11 60
Data Riser
Print Room
Electrical Riser HVAC Riser
Private Office
Closet Open Office Space
DW
Employee’s Lounge Kitchenette Riser
D
Kitchen
GF Retail Riser Carpark Riser
Private Office
Continues..
Private Office
Private Office
Private Office
Private Office
Private Office
Private Office
E Data Riser - 1x0.5m Electrical Riser - 1.5x0.8m HVAC Riser - 2x1.5m Kitchenette Riser - 0.5x0.5m GF Retail Riser - 0.6x0.6m
4
6
5
Carpark Riser - 0.6x0.6m Stair Pressureisation Riser - 1x0.5m Wet Services Riser - 0.6x0.6m Toilet Exhaust Riser - 0.7x0.7m
TDG
SARC 321 - Office Design
South East Floor Plan - Level 2
Austin Dsouza - 300327560
Scale 1:100 - A104
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
700x700mm WC Extract Duct
Return air duct, offset section 140x300mm
2000x1500mm HVAC Air Return Riser
A
600x600mm Extract Inlet B
600x600mm Supply Outlet
Supply air duct, offset section 140x300mm
600x600mm Return Inlet Round Flex Duct Volume Control Damper Fire Damper C
Main trunk rectangular HVAC Supply air duct, flanged, 600x400mm
VCD
600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W
FD
FD VCD
VCD
Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping
FD
D
600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
300x300mm Return Air duct further on in the route
E
1
TDG
2
2000x1500mm HVAC Air Supply Riser
SARC 321 - Office Design
3
500x500mm Kitchen Extract Duct
4
Main trunk rectangular HVAC Return air duct, flanged, 600x400mm
Services Duct Plan - Level 2
5
300x300mm Supply Air duct further on in the route
6
Austin Dsouza - 300327560
Scale 1:200 - A105
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Data Riser 2000x1500mm HVAC Air Return Duct A
600x600mm Extract Inlet B
600x600mm Supply Outlet
Data route to access perimeters
600x600mm Return Inlet Round Flex Duct Volume Control Damper Fire Damper C
Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W
Electrical route to access all bays D
600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
E
1
TDG
2
SARC 321 - Office Design
Electrical riser
3
4
Services Cable Tray Plan - Level 2
5
6
Austin Dsouza - 300327560
Scale 1:200 - A106
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Fire riser location A
600x600mm Extract Inlet B
600x600mm Supply Outlet 600x600mm Return Inlet Round Flex Duct Volume Control Damper Fire Damper C
Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W
D
600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
E
1
TDG
2
Main Feed route
SARC 321 - Office Design
3
4
Fire Services Pipe Plan - Level 2
5
6
Austin Dsouza - 300327560
Scale 1:200 - A107
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Floor to floor height of 3700mm
600x600mm Extract Inlet 600x600mm Supply Outlet 600x600mm Return Inlet Round Flex Duct Volume Control Damper Fire Damper Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping
600x600mm ceiling tile system on lightweight metal rondo system
600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
2700m above finished floor level
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
Continues..
TDG
SARC 321 - Office Design
13mm GIB Fyreline plasterboard lining to core ceiling on lightweight rondo metal reamaing
Reflected Ceiling Plan - Level 2, NW
13mm GIB Aqualine plasterboard lining to all wet area ceilings on lightweight rondo metal reamaing
Austin Dsouza - 300327560
Scale 1:100 - A108
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
A
Floor to floor height of 3700mm
600x600mm Extract Inlet 600x600mm Supply Outlet 600x600mm ceiling tile system on lightweight metal rondo system
600x600mm Return Inlet
B
Continues..
Round Flex Duct Volume Control Damper Fire Damper Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W
2700m above finished floor level C
600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
-
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
Continues..
-
13mm GIB Fyreline plasterboard lining to core ceiling on lightweight rondo metal reamaing
TDG
13mm GIB Aqualine plasterboard lining to all wet area ceilings on lightweight rondo metal reamaing
SARC 321 - Office Design
Reflected Ceiling Plan - Level 2, NE
Austin Dsouza - 300327560
Scale 1:100 - A109
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Continues..
-
-
Floor to floor height of 3700mm
600x600mm Extract Inlet 600x600mm Supply Outlet 600x600mm Return Inlet Round Flex Duct Volume Control Damper Fire Damper Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping
600x600mm ceiling tile system on lightweight metal rondo system
600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
2700m above finished floor level
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
1
2
3
13mm GIB Aqualine plasterboard lining to all wet area ceilings on lightweight rondo metal reamaing
TDG
SARC 321 - Office Design
Reflected Ceiling Plan - Level 2, SW
4
13mm GIB Fyreline plasterboard lining to core ceiling on lightweight rondo metal reamaing
Austin Dsouza - 300327560
Scale 1:100 - A110
C
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Continues..
-
-
600x600mm Extract Inlet 600x600mm Supply Outlet 13mm GIB Fyreline plasterboard lining to core ceiling on lightweight rondo metal reamaing
600x600mm Return Inlet Round Flex Duct
Continues.. D 13mm GIB Aqualine plasterboard lining to all wet area ceilings on lightweight rondo metal reamaing
Volume Control Damper Fire Damper Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
2700m above finished floor level
E
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
3
4
5 600x600mm ceiling tile system on lightweight metal rondo system
TDG
SARC 321 - Office Design
Reflected Ceiling Plan - Level 2, SE
6
Floor to floor height of 3700mm
Austin Dsouza - 300327560
Scale 1:100 - A111
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
700x700mm WC Extract Duct
Return air duct, offset section 140x300mm
2000x1500mm HVAC Air Return Duct
A
600x600mm Extract Inlet B
600x600mm Supply Outlet
Supply air duct, offset section 140x300mm
600x600mm Return Inlet Round Flex Duct Coordinated plan Zoom-in, Segment 1 and 2
Volume Control Damper Fire Damper C
VCD
600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W
FD
FD VCD
VCD
Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping
FD
D
600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
Main trunk rectangular HVAC Supply air duct, flanged, 600x400mm
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
E
1
TDG
2
2000x1500mm HVAC Air Supply Duct
SARC 321 - Office Design
3
500x500mm Kitchen Extract Duct
4
Main trunk rectangular HVAC Return air duct, flanged, 600x400mm
Co-ordinated Plan - Level 2
5
6
Austin Dsouza - 300327560
Scale 1:200 - A112
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Continues..
600x600mm Extract Inlet
FACADE
600x600mm Supply Outlet 600x600mm Return Inlet Round Flex Duct Volume Control Damper Fire Damper Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W 600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
Ceilieng at 2700m above finished floor level
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
1
TDG
600x600mm ceiling tile system on lightweight metal rondo system
SARC 321 - Office Design
2
Co-ordinated Plan Zoom 1 - Level 2
Floor to floor height of 3700mm
Austin Dsouza - 300327560
Scale 1:50 - A113
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Ceilieng at 2700m above finished floor level
600x600mm Extract Inlet 600x600mm Supply Outlet 600x600mm Return Inlet Round Flex Duct
Continues..
Volume Control Damper Fire Damper Fire protection wet sprinkler, 15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W
FD VCD
FD
VCD
600x600mm ceiling tile system on lightweight metal rondo system
600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W 203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
Floor to floor height of 3700mm
TDG
Main trunk rectangular HVAC Return air duct, flanged, 600x400mm
SARC 321 - Office Design
13mm GIB Fyreline plasterboard lining to core ceiling on lightweight rondo metal reamaing
Co-ordinated Plan Zoom 2 - Level 2
CORE
Austin Dsouza - 300327560
Scale 1:50 - A114
1 Metal Cable Tray 300x100mm
Return Air Duct, 300x300 straight profile metal duct
Supply Air Duct, 600x300 straight profile metal duct
Light intentionally extruded from the ceiling
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Wet Sprinkler Fire System15mm Pendant with guard, 42mm copper piping
600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W
Continues.. 135mm timber framed walls with 2 layers of 10mm GIB Fyreline both sides, Acoustic insulation
600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
Concrete flooring with smooth finish
TDG
SARC 321 - Office Design
Section 1 - Part 1
Austin Dsouza - 300327560
Scale 1:20 - A115
Metal Cable Tray 300x100mm
Supply Air Duct, 600x300 straight profile metal duct
2 Light intentionally extruded from the ceiling
Return Air Duct, 300x300 straight profile metal duct
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
Wet Sprinkler Fire System15mm Pendant with guard, 42mm copper piping 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W
Continues..
Continues.. 60/60/60 FRR Fire rated door, Pacific VP60 refer to fire door details
600mm x 600mm Reinforced Column, refer to engineer’s speficifations
TDG
Concrete flooring with smooth finish
SARC 321 - Office Design
Section 1 - Part 2
Austin Dsouza - 300327560
Scale 1:20 - A116
Metal Cable Tray 300x100mm
Supply Air Duct, 600x300 straight profile metal duct
Light intentionally extruded from the ceiling
Return Air Duct, 300x300 straight profile metal duct
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W
Continues..
60/60/60 FRR Fire rated door, Pacific VP60 refer to fire door details
600mm x 600mm Reinforced Column, refer to engineer’s speficifations
TDG
Concrete flooring with smooth finish
SARC 321 - Office Design
Section 1 - Part 3
Austin Dsouza - 300327560
Scale 1:20 - A117
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
34
A
600x600mm Light Fitting Phillips Coffer light - Parabolic Square White, Medium Luminance - 230V Initial Intensity - 40W @ 65.00lm/W
B 600x600mm Light Fitting Phillips Recessed Parabolic Light White, High Luminance - 230V Initial Intensity - 80W @39.38lm/W
600x600mm Light Fitting Phillips Plain Surface Light White, High Luminance - 230V Initial Intensity - 62W @92.32lm/W
C
203mm Downlight Fitting Phillips Recessed Can Fixture White, High Luminance - 230V Initial Intensity - 100W @17.50lm/W
ALL DATA RECIEVED FROM THE ELUM PLUGIN IN REVIT 2016, RESULTS ARE AN OUTCOME OF QUALITIES OF LIGHTS USED AND THEIR SPACING IN THE DESIGNATED AREAS.
DW F
D Legend: (Average light luminance per room)
Less than 100 lx 100 lx - 200 lx 200 lx - 300 lx 300 lx - 400 lx E
400 lx - 500 lx 500 lx - 600 lx
1
2
3
4
5
6
600 lx - 700 lx 700 lx or more
TDG
SARC 321 - Office Design
Elum Avergae Luminance Plan - Level 2 Austin Dsouza - 300327560
Scale 1:200 - A118
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
NOT TO SCALE
1
Elum office render A
NOT TO SCALE
2
TDG
Elum office render B
SARC 321 - Office Design
Elum Office Light Coverage Renders
Austin Dsouza - 300327560
A119
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
NOT TO SCALE
TDG
SARC 321 - Office Design
Co-ordinated Services Render
Austin Dsouza - 300327560
A120
All dimentions and levels to be checked on site before work commences. Any discrepancies shall be immediately notified to the architect/project manager in writing. Do not scale from this drawing, use figured dimentions only. If in doubt please consult the architect stated below. This drawing remains the property of TDG and may not be used or reproduced in whole or in part without written permission.
NOT TO SCALE
1
Services Detail A
NOT TO SCALE
2
TDG
Services Detail B
SARC 321 - Office Design
Zoom-in Services Renders
Austin Dsouza - 300327560
A121