November 2011 Biodiesel Magazine

INSIDE: BIOHEAT FOCUS GROUP POLLED IN NEW YORK CITY November 2011

Fuel Quality, Testing & Standards Everything You Need to Know About Biodiesel Specification Developments, New Test Methods, Analytical Services and More Pages 24, 36

Plus

Glycerin Grades and Testing Page 30

AND

Year-End Policy Priorities Page 42

WWW.BIODIESELMAGAZINE.COM

Back to Profitability – your Biodiesel Plant

What are the missing pieces to bring your smile back?

BioDiesel Quality

Feedstock Flexibility

Does ALL your Biodiesel production meet ASTM D6751 / EN 14214 standards or are there any negative impacts on yield, capacity and feedstock flexibility?

Do you need highly refined and expensive Vegetable Oil or can your plant deal partially or even exclusively with cheaper high FFA feedstock like Trap/Brown Grease, Yellow Grease/Used Cooking Oil, Tallow/Animal Fat, PFAD?

100% Yield

Saleable By-Products or Waste

Is your plant able to convert 100% of the feedstock or are you losing valuable Triglycerides and FFAs?

Does your plant produce waste (filter material, soapstock, etc.) or can you earn maximum additional income e.g. with high quality Glycerine?

Nameplate Capacity

Plant Safety

Do you reach the capacity you paid for or are you not getting the full potential from your investment?

Is your plant meeting the latest safety standards and regulations?

If one or more of the above applies to your plant, we can help you smile again! www.bdi-bioenergy.com

CONTENTS

NOVEMBER 2011 VOLUME 8 ISSUE 11

36

30

24 SPECIFICATIONS

GLYCERIN

TESTING

A New Standard for Quality

Clearing the Way for Byproduct Quality

Easier Than Ever

Changes to the biodiesel spec

BY ERIN VOEGELE

Glycerin grades, testing and pricing

POLICY

An Uncertain Tomorrow

Testing, analytical service options

Expiring tax credits in a locked Congress

BY LUKE GEIVER

BY BRYAN SIMS

DEPARTMENTS 4 Editor’s Note Policy Priorities

BY RON KOTRBA 6 Legal Perspectives

What’s Confidentiality Between Friends?

42

BY RON KOTRBA

CONTRIBUTIONS BIOHEAT

46 Will NYC Homeowners Embrace Bioheat

as the Evolution of Oilheat?

Focus group highlights Bioheat benefits

BY PAUL J. NAZZARO

BY JOE LEO 8 Talking Point

Reducing Cost While Increasing Output

BY CHRIS GETTY 10 Biodiesel Events 12 FrontEnd

Biodiesel News & Trends

18 Inside NBB 22 Business Briefs

Companies, Organizations & People in the News

48 Marketplace/Advertiser Index

Biodiesel Magazine: (USPS No. 023-975) November 2011, Vol. 8, Issue 11. Biodiesel Magazine is published monthly. Principal Office: 308 Second Ave. N., Suite 304, Grand Forks, ND 58203. Periodicals Postage Paid at Grand Forks, North Dakota and additional mailing offices. POSTMASTER: Send address changes to Biodiesel Magazine/Subscriptions, 308 Second Ave. N., Suite 304, Grand Forks, North Dakota 58203.

NOVEMBER 2011

z

BIODIESEL MAGAZINE

3

EDITOR'S NOTE Several biofuel tax incentives will expire at the end of the year, including the $1 per gallon biodiesel blender credit. Congress is gridlocked. A super committee has been tasked with getting the debt ceiling and budget deficit under control. Understandably, those in the biodiesel industry must be wondering what the organization that represents them on Capitol Hill, the National Biodiesel Board, can do, or is doing, to secure a favorable policy landscape for biodiesel well into the future.

After interviewing Joe Jobe, CEO of the NBB, and Anne Steckel, the NBB’s new vice president of federal affairs, I wrote a story, “The Uncertain Tomorrow,” that covers this timely topic as the year heads toward its sunset. There are several bills out there that aim to extend or alter the biodiesel incentive, but they are going nowhere fast. Will any legislation get through Congress in the next month or two? And, if so, could an extenders bill be attached? While those in the industry give me mixed opinions on whether the industry would be better off with or without the credit, the NBB leadership believes the tax credit is essential to the livelihood of its members. Here’s why.

When asked what NBB’s No. 1 policy priority is today, neither Jobe nor Steckel said it’s extension of the biodiesel tax credit. Instead, they say their focus is on upholding and defending the implementation of RFS2 and its biomass-based diesel carve-out—and the best method to do this is through extension of the tax credit. So how are they working to do this? “NBB members have an incredible team of lobbyists and consultants who keep them plugged in on Capitol Hill and in the executive branch,” says Jobe. “Along with a strong in-house staff, our team includes three lobbying firms that specialize in energy, tax and agriculture issues, as well as a strong legal team. We also have a legal team that leads our litigation efforts defending against challenges to the RFS2, and regulatory and trade teams.” Steckel adds, “This is a historically difficult fiscal environment, and getting anything through Congress will be a real challenge. That said, it is certainly not time to throw in the towel, and I don’t think it would be time to give up next year either if Congress allows it to lapse in December.” Check out the full story on page 42. And contact your representatives and let them know what your position is.

POLICY PRIORITIES Ron Kotrba

Editor Biodiesel Magazine rkotrba@bbiinternational.com

FOR MORE INFORMATION AND PERSPECTIVE, VISIT KOTRBA’S BLOG AT BIODIESELMAGAZINE.COM/BLOG/READ/

Associate Editors Luke Geiver talks to testing companies and weighs the option of third-party labs versus in-house testing in “Easier than Ever” on page 36.

4

BIODIESEL MAGAZINE

z

NOVEMBER 2011

Erin Voegele dives into the near- and long-term adjustments to biodiesel fuel specifications in “A New Standard for Quality” on page 24.

Bryan Sims discusses glycerin testing and grades in “Clearing the Way for Byproduct Quality” on page 30.

www.BiodieselMagazine.com E D I T O R I A L Ron Kotrba Editor rkotrba@bbiinternational.com Bryan Sims Associate Editor bsims@bbiinternational.com Erin Voegele Associate Editor evoegele@bbiinternational.com Luke Geiver Associate Editor lgeiver@bbiinternational.com Jan Tellmann Copy Editor jtellmann@bbiinternational.com P U B L I S H I N G Mike Bryan

&

S A L E S

Chairman mbryan@bbiinternational.com

Joe Bryan

CEO jbryan@bbiinternational.com

Tom Bryan

Vice President tbryan@bbiinternational.com

Matthew Spoor Howard Brockhouse

Vice President, Sales & Marketing mspoor@bbiinternational.com Executive Account Manager hbrockhouse@bbiinternational.com

Jeremy Hanson

Senior Account Manager jhanson@bbiinternational.com

Chip Shereck

Account Manager cshereck@bbiinternaional.com

Marty Steen

Account Manager msteen@bbiinternational.com

Bob Brown

Account Manager bbrown@bbiinternational.com

Andrea Anderson Dave Austin Jessica Beaudry

Account Manager aanderson@bbiinternational.com Account Manager daustin@bbiinternational.com Circulation Manager jbeaudry@bbiinternational.com

Marla DeFoe

Advertising Coordinator mdefoe@bbiinternational.com

John Nelson

Senior Marketing Manager jnelson@bbiinternational.com

Jaci Satterlund Elizabeth Burslie

A R T Art Director jsatterlund@bbiinternational.com Graphic Designer bburslie@bbiinternational.com

Subscriptions Subscriptions to Biodiesel Magazine are free of charge to everyone with the exception of a shipping and handling charge of $49.95 for any country outside the United States, Canada and Mexico.

To subscribe, visit www.biodieselmagazine.com or you can send your mailing address and payment (checks made out to BBI International) to: Biodiesel Magazine Subscriptions, 308 Second Ave. N., Suite 304, Grand Forks, ND 58203. You can also fax a subscription form to (701) 746-5367. Reprints and Back Issues Select back issues are available for $3.95 each, plus shipping. Article reprints are also available for a fee. For more information, contact us at (701) 746-8385 or service@bbiinternational.com. Advertising Biodiesel Magazine provides a specific topic delivered to a highly targeted audience. We are committed to editorial excellence and high-quality print production. To find out more about Biodiesel Magazine advertising opportunities, please contact us at 701-746-8385 or service@bbiinternational.com. Letters to the Editor We welcome letters to the editor. If you write us, please include your name, address and phone number. Letters may be edited for clarity and/or space. Send to Biodiesel Magazine Letters, 308 Second Ave. N., Suite 304, Grand Forks, ND 58203 or e-mail to rkotrba@bbiinternational.com.

Please recycle this magazine and remove inserts or samples before recycling COPYRIGHT Š 2011 by BBI International

TM

NOVEMBER 2011

z

BIODIESEL MAGAZINE

5

LEGAL PERSPECTIVE

What’s Confidentiality Between Friends?

BY JOE LEO

In the late 19th century, Timothy Campbell, a U.S. Representative from New York, said to President Grover

6

Cleveland, “What's the Constitution between friends?” in response to Cleveland's refusal to support a bill based on his belief that it was unconstitutional. I frequently encounter a similar sentiment when assisting clients in confidentiality agreement negotiations. Many times, confidentiality agreements are negotiated early in a transaction at a time when everyone is in the “honeymoon phase.” Everyone is working towards what is anticipated to be a mutually beneficial deal, and very often the possibility that conflict could arise in the future is not considered. For this reason, confidentiality agreements are either not considered or given little attention. However, as with all good planning, considering potential problems from the outset can allow you to avoid liability in the future should problems arise. In most cases during the honeymoon phase, you can use the good feelings of all parties involved to negotiate sensible and comprehensive confidentiality agreements that will protect both parties if conflict were to arise in the future.

Many companies have a standard confidentiality agreement that they use for a variety of purposes. While it may be appropriate to use a standard confidentiality agreement for a number of similar situations, there is no one-size-fitsall confidentiality agreement that will cover every transaction. These agreements should be specifically tailored to match not only the type of transaction involved, but also the nature of the confidential information.

The first consideration when negotiating a confidentiality agreement is whether both parties will be providing confidential information or whether one party will disclose the confidential information while the other party is purely a recipient of the confidential information. Determining which parties will be disclosing confidential information will be essential to how the confidentiality agreement is structured. If both parties are expected to provide the other with confidential information, in most cases, it makes sense to have an agreement where the rights and responsibilities of both parties are the same. In this case, both parties will have an interest in protecting their confidential information while at the same time negotiating an agreement that is not overly burdensome or punitive in the event confidential information is disclosed.

Negotiating a confidentiality agreement where only one person discloses confidential information and the other person is the recipient of that confidential information, is frequently more difficult. When only one party is expected to disclose confidential information, the disclosing party BIODIESEL MAGAZINE NOVEMBER 2011 z

has a greater interest in protecting the confidential information and providing meaningful, and potentially more punitive, remedies in the event the confidential information is compromised. On the other hand, the receiving party has a greater interest in reducing the restrictions associated with confidentiality agreement and minimizing the penalties involved in violation of the agreement.

When negotiating a confidentiality agreement, you should always consider the mechanics involved in determining what information is covered by the agreement. Some confidentiality agreements provide that only information which is clearly marked as confidential is covered, while others provide that any information exchanged is automatically covered by the agreement. It is important to understand these mechanics before any information is exchanged so you do not accidentally disclose sensitive information that is not covered by your confidentiality agreement.

In addition, you should always consider the burdens of complying with the confidentiality agreement in light of the types of information to be provided. Frequently, confidentiality agreements require the parties receiving the confidential information to return all copies of the confidential information at the request of the disclosing party. In order to ensure compliance with this type of provision, the person receiving the confidential information must keep close tabs on what information was provided and who has control of the information. This task can be increasingly difficult in the event copies of the confidential information are made or electronic versions of the document are saved on various computers in your organization. Keep in mind that many confidentiality agreements also require the return or destruction of any notes or documents that are created that analyze the confidential information. Without careful procedures designed to keep track of the confidential information, it will be difficult to ensure compliance with the terms of this type of confidentiality agreement.

Finally, it is always a good idea to have confidentiality agreements with your employees and any service providers who may have access to your confidential information or the confidential information of another. You could be liable in the event your employee or a service provider that you have engaged discloses the confidential information of another, especially if the information is covered by a confidentiality agreement you have signed.

Author: Joe Leo Attorney, BrownWinick (515) 242-2462 leo@brownwinick.com

The 2012 market starts here: NBB's annual conference is the epicenter for the growing business of biodiesel. Don't miss your opportunity to chart a course of success for the coming year.

REGISTER TODAY! Register by January 20th and save $200! www.biodieselconference.org/2012

HOSTED BY

TALKING POINT

Reducing Cost While Increasing Output

BY CHRIS GETTY

Whether biofuels will truly contribute to the reduction of the world’s reliance on petroleum, a critical question simply remains. What is the most cost effective process to produce biofuel?

This was a question I asked in 2009, and recognizing a possible solution, I formed AE Resources Inc. As part of a Sponsored Research Project at Penn State University, AE Resources entered into an agreement with the university to develop and commercialize what we believe to be such a solution. Under the direction of Matthew M. Kropf, the project has investigated the technical aspects of the advanced biofuel production reaction with a focus on the development of a novel technology to minimize chemical waste, improve efficiency, product quality, and further translate to other value-added products. The research has resulted in an improved process and understanding of the benefits of ultrasound and microwaves in chemical processing.

The Multi-Energy Optimization Process focuses two unique yet distinctive energies at the point of reaction thus optimizing the chemical conversion. Combining microwave and ultrasound has proven to produce biodiesel more efficiently than other traditional means. It produces a complete emulsification, uniformly distributing equal sizes of oil and catalyst droplets while heating it at the point of reaction.

This patented technology has demonstrated that the energy needed to produce a gallon of biodiesel to be 662 Btu compared to 4,912 Btu. It furthermore reduces the catalyst consumption from 0.5 percent weight NaOH to 0.2 percent weight NaOH at atmospheric pressure. This approach has been demonstrated for a multitude of feedstocks including those with high FFA content without the need for neutralization or additional catalysts.

Higher frequency ultrasonic cavitation is shown to result in smaller size and narrower distribution of methanol droplets in oil. The ultrasonic technique itself is shown to create finer dispersions of methanol than those prepared conventionally, as compared to shear mixing. To demonstrate the pertinence of microwave for biofuel production, the dielectric loss of pure methanol was measured as increasing amounts of NaOH catalyst were added. The relation between dipolar relaxation and the free rotation of a single polar molecule was confirmed with the complex permittivity measurements of methanol over a range of temperatures. As the temperature increases, the available energy for molecules to rotate, free of hydrogen bonding, is also increased. Practically, this result indicates that preheated 8

BIODIESEL MAGAZINE

z

NOVEMBER 2011

methanol will absorb microwaves less efficiently.

More importantly, this confirmed that when properly “tuned� and administered, microwave energy directly couples to hydrogen bonding breakages, which are limiting factors in diffusion and chemical activity. This means that the appropriate selection of microwave directly enhances the reaction rate. Measuring the time rate of change of the temperature during microwave heating of various emulsions of the components oil and methanol also revealed an unexpected result. It demonstrated that the heating rate of emulsions is greater than either component. This is a unique result, in that, one would expect the heating rate to be limited to the more active, higher dielectric loss material, in this case methanol. However, it was shown that when methanol droplets are suspended ultrasonically in a catalyst-free emulsion, the net heating rate can be greater than that of methanol alone. The reason for this extension is due to the stabilization, both mechanically and thermally, provided by the oil. The oil allows for heat to be conducted away from the methanol droplets at the same time as it prevents the fine droplets from nucleated boiling. In fact, in other studies of near-critical and supercritical fluids, stabilizing droplets in oil has been used to achieve the maximum superheated temperatures by conventional heating.

In any manufacturing process, there a four key components to maximizing efficiencies and reducing costs while maintaining quality: capital investment, the cost of raw material, energy consumption and labor. A revolutionary approach to energy efficiency has been developed for the industrial chemical industry. MEOP is a highly cost-effective, energy-efficient organic chemistry process providing more than 26 percent savings in operational costs, and a 50 percent lower capital expense than current methods.

The technology is an alternative, energy-efficient method of producing organic compounds that nets a 50 percent reduction in energy use and 60 percent reduction in catalyst needs. Proof of concept has been achieved with a prototype, which consistently produces near-perfect emulsifications, while achieving superheated temperatures. This has resulted in a more efficient and streamlined approach to the production of a multitude of organic chemical products.

With the introduction of this technology, producers reduce capital and energy costs, maximize labor costs and increase output without sacrificing quality.

Author: Chris Getty President, AE Resources Inc. (412) 996-2002 getty@aeresource-inc.com

EVENTS CALENDAR Southeast Biomass Conference & Trade Show NOVEMBER 1-3, 2011

Hyatt Regency Atlanta Atlanta, Georgia With an exclusive focus on biomass utilization in the Southeast —from the Virginias to the Gulf Coast—the Southeast Biomass Conference & Trade Show will connect the area’s current and future producers of biomass-derived electricity, industrial heat and power, and advanced biofuels, with waste generators, aggregators, growers, municipal leaders, utility executives, technology providers, equipment manufacturers, investors and policy makers.

(866)746-8385 www.biomassconference.com/southeast

Biomass Event Hotspot: San Francisco in January

01/16

If you go to one event in the western U.S. in 2012, make it BBI International’s Pacific West Biomass Conference & Trade Show, produced jointly by Biomass Power & Thermal and Biorefining magazines.

The Pacific West Biomass Conference & Trade Show, which heads to the Bay area this year, will be held Jan. 16-18 at the San Francisco Marriot Marquis.

The conference, one of three distinct regional offshoots of BBI’s International Biomass Conference & Expo, will feature more than 60 speakers in four tracks: - Biomass power and thermal - Feedstocks - Biomass project development and finance - Biorefining The Pacific West Biomass Conference & Trade Show will connect the area’s current and future producers of biomass-derived electricity, industrial heat and power, and advanced biofuels, with: - Waste generators - Aggregators - Growers - Municipal leaders - Utility executives - Technology providers - Equipment manufacturers - Investors - Policymakers The Pacific West Biomass Conference & Trade Show is designed to help you, the biomass industry stakeholder, identify and evaluate solutions that fit your operation.

It's time to improve your operational efficiencies and tap into the revenue-generating potential of sustainable biomass resources in the region.

Register today at http://pacificwest.biomassconference.com.

10

BIODIESEL MAGAZINE

z

NOVEMBER 2011

Pacific West Biomass Conference & Trade Show JANUARY 16-18, 2012

San Francisco Marriott Marquis San Francisco, California With an exclusive focus on biomass utilization in California, Oregon, Washington, Idaho and Nevada, the Pacific West Biomass Conference & Trade Show will connect the area’s current and future producers of biomass-derived electricity, industrial heat and power, and advanced biofuels, with waste generators, aggregators, growers, municipal leaders, utility executives, technology providers, equipment manufacturers, investors and policy makers.

(866)746-8385 www.biomassconference.com/pacificwest

California Biodiesel Conference JANUARY 16, 2012

San Francisco Marriott Marquis San Francisco, California Presented by California Biodiesel Alliance and Biodiesel Magazine CBA is excited to kick off its inaugural statewide conference on Jan.16 in downtown San Francisco. This one-day event, with evening reception, will take place as part of BBI International's Pacific West Biomass Conference to be held Jan. 16-18 at the Marriott Marquis. This is an important milestone for the California biodiesel industry, and we look forward to meeting you there. Details are being developed now and will be posted here as they become available.

(866)746-8385 www.biomassconference.com/pacificwest

International Biomass Conference & Expo APRIL 16-19, 2012

Colorado Convention Center Denver, Colorado Organized by BBI International and coproduced by Biomass Power & Thermal and Biorefining Magazine, this event brings current and future producers of bioenergy and biobased products together with waste generators, energy crop growers, municipal leaders, utility executives, technology providers, equipment manufacturers, project developers, investors and policy makers. It’s a true one-stop shop—the world’s premier educational and networking junction for all biomass industries.

Presentation ideas are now being accepted online.

(866)746-8385 www.biomassconference.com

Co-located with the Pacific West Biomass Conference & Trade Show

January 16, 2012 San Francisco, CA Making History – Creating Policy This unprecedented event is the first event of its kind and will serve as the state’s most important conversation between policy makers, investors, researchers, producers and fuel users regarding the economic and environmental benefits of producing, distributing and utilizing biodiesel and other forms of renewable diesel.

Informative Tracks Includes: • New Production Technologies, Energy Integration and Financing • The LCFS and the California Market • International, Federal and State Regulations & Incentives • Advanced Feedstocks, Algae and Beyond To register visit: www.biomassconference.com/pacificwest or call us at 866-746-8385

Register Today!

FrontEnd

Biodiesel News & Trends

A Confluence of Process Optimization When Alfred Willard French founded French Oil Mill Machinery Co. in 1900, the Massachusetts Institute of Technology graduate and veteran of the linseed oil industry believed that engineering creativity and research could produce superior vegetable oil mill machinery. Today, the 110-year-old company is applying those founding principles not only to the industrial food oil markets, but it’s also serving the burgeoning biodiesel industry through the offering of its Innovation Center in Piqua, Ohio.

By working closely with French Oil’s team of experienced engineers, customers are able to optimize and fine-tune their extraction process through lab tests on the company’s processing equipment, such as conditioners, screw presses or extruders, for obtaining desired processing results prior to ordering the equipment, says Tayte French Lutz, marketing coordinator for French Oil. “We’ve performed many tests on a variety of different products over the years,” Lutz tells Biodiesel Magazine. “It’s valuable for us to see how our equipment can be used and what other markets there are for our equipment, but of course it’s great for our customers who can use our equipment to test their materials and their process to

12

BIODIESEL MAGAZINE

z

see exactly how much residual oil they can get from their products and improve their process based on information learned in the trials.”

While the company has years of experience testing common biodiesel oilseed feedstocks such as canola, soybeans and jatropha, the company has also tested other oil-bearing materials, including grape seed, moringa, paprika, walnut, hemp, corn germ, apricots, peach pits, coffee beans and chili peppers. “Some produce more oil than others,” she notes.

French Oil’s Innovation Center offers process optimization of its equipment to companies that integrate biodiesel and agribusiness processes, says Lutz. Can Pro Ingredients Ltd., for example, which processes canola and alfafa, partnered with French Oil in November 2005 to optimize the proprietary fractionation equipment it uses at its plant in Arborfield, Saskatchewan, Canada. The canola is processed into high-quality extra virgin oil, and press cake, which is used in a protein concentrate.

“There have been some other customers in the biodiesel industry that have taken advantage of the Innovation Center,” Lutz says, adding that an undisclosed biodiesel producer has been conducting trials for more than two years with the company.

NOVEMBER 2011

PHOTOS: FRENCH OIL

How French Oil works with industry to achieve process improvements

INNOVATIVE BY DESIGN: French Oil offers a range of equipment to meet the needs of biodiesel and agribusiness companies, such as the company's conditioner/cooker (bottom) and its achiever screw press (top).

“It’s been a great project for us and them,” she says.

While a specific cost of conducting performance trial testing at French Oil’s Innovation Center varies by project, Lutz assures, “The cost is very manageable for customers in the crushing and agribusiness industry,” she says, “especially considering these companies are spending millions and millions of dollars to get their processes up and running, so our costs are incredibly manageable considering the overall spending for startups.” —Bryan Sims

FRONTEND

Building a Unique Small-Scale Solution When he was only 14 years old, Sam Flournoy set out to design and build his own biodiesel processor. It was the summer of 2008, and fuel prices were skyrocketing. Flournoy’s father, who owns a local tree works company, was spending $10,000 to $12,000 a month on fuel. According to Flournoy, one of his primary goals was to produce a renewable fuel that his father could use to offset a portion of his fuel costs.

“My father had heard about biodiesel from one of his friends,” Flournoy says. “The guy showed us his set-up and it seemed pretty easy to do, so I started doing some research and a whole lot of reading, and started building my first processor.”

According to Flournoy, it took about six months of work before he was able to produce his first batch of biodiesel fuel.

“It was kind of like a work in progress for most of the time that I had it,” he says. Once the processor was operational, Flournoy began to automate the machine. “I introduced the PLC (programmable logic controller) to the machine, and DESIGNING THE FUTURE: Richmond, Va.-based high school student, Sam Flournoy, eventually got it to where it could run a whole batch pretty collects WVO from his and other high schools, restaurants and hospitals for use as feedstock in the processing units he designed and built. much by the touch of a button,” he says.

The first processor Flournoy built could produce a 60-gallon batch of biodiesel in approximately 8 hours. He has since B20 to a B100 blend. sold that machine, and constructed a new model. The new procesFlournoy says he will likely sell the second biodiesel processor sor can also produce 60-gallon batches of biodiesel, but does it as well, so he can begin work on a more streamlined third model. much faster. “The second one is the same size but it produces biod- “When I first started out I was more focused on producing the iesel in about half the time because I added a couple more tanks fuel and selling it, but after my first processor I realized I was really to make it more of a continuous batch,” Flournoy says. “I bought interested in designing the processors and making them as efficient all new parts for the second one and designed each tank by myself. as they can be,” he says.

Right now I am working on a few other things to get the batch time After he graduates from high school, Flournoy says he plans down even lower.” to continue his education in a field that will allow him to continue Flournoy is collecting waste vegetable oil from his high school, working on biodiesel production. “I’m not 100 percent sure what several other schools, hospitals and restaurants for use as feedstock. I want to go into,” he says. “But, I definitely want to test the water The fuel he currently produces is being used to fuel equipment with some kind of chemical engineering, or mechanical engineerin his father’s fleet. According to Flournoy, depending upon the ing, that sounds like something that would interest me, definitely.” specific piece of equipment, the company is using anywhere from a —Erin Voegele

A New Benchmark

Biodiesel producer announces record sales e-Biofuels LLC, a wholly-owned subsidiary of Imperial Petroleum Inc., recently announced it sold approximately 26 million gallons of biodiesel during the fiscal year ending July 31, resulting in approximately $106 million in revenue.

“We’re very excited about the company’s growth prospects,” says Imperial President Jeffrey Wilson. At the Middletown, Ind., facility’s current product rates, the company is on pace to produce in

excess of 34 million gallons of fuel in fiscal 2012 or an annual increase of about 30 percent. “In the fourth quarter of fiscal 2011, we settled or resolved all of the past vendor and litigation issues that had faced e-Biofuels at the time of its acquisition by [Imperial].”

On Sept. 16, Imperial further announced that it has entered into definitive agreements with accredited and instrumental investors to raise $3.1 million before

fees and expenses in a private placement of equity securities.

“The proceeds of this equity raise will enable us to rapidly expand our biodiesel operations at the Middletown facility by about 30 percent,” Wilson says. “We expect the rapid expansion of the plant to between 40 and 45 MMgy to increase cash flow and revenues, enabling us to continue on our growth trajectory.” —Erin Voegele

NOVEMBER 2011

z

BIODIESEL MAGAZINE

13

PHOTO: SAM FLOURNOY

Young Richmond entrepreneur designs his own biodiesel processors

FRONTEND

New Technologies Continue to Develop Two alternative biodiesel processes discussed at Houston event The International Biorefining Conference & Trade Show held in Houston in September wasn’t exclusively about biobased chemicals and next-gen biofuels.

In fact, the event featured two speakers who presented novel biodiesel technologies that are on the verge of commercialization.

John Massingill, president of Advanced Materials and Processes, presented on his company’s fiber processor, which essentially consists of steel fibers between 8 and 150 microns in diameter, that can be used both as a device to clean crude crop oils and as a reactor to transesterify triglycerides into biodiesel and glycerin.

The technology can be used to remove soapstock, gums and free fatty acids from crude vegetable oils, allowing farmer cooperatives to increase their yields by not sending out more valuable fractions of the oil as cheaper soapstock, which only sells for 5 to 10 cents a pound. The fiber processor operates via a polar phase whereby some of the liquid “runs down the fibers, with the other running around the fibers.”

If this technology sounds farfetched—and even farther from commercialization—it’s not. Massingill said it’s going commercial next quarter at Valley Co-op in Harlingen, Texas, in a 13 MMgy

cottonseed crush facility. While the cottonseed plant is being outfitted with the technology, the co-op’s 3 MMgy Greenline Industries plant (Valco Bioenergy) is also being retrofitted to use the fiber processor for biodiesel production.

Matthew Kropf, director of the Energy Institute and assistant professor of petroleum technology at the University of Pittsburgh Bradford, who is also a research associate and adjunct professor of engineering science and mechanics at Penn State, said he chose this opportunity at the International Biorefining Conference & Trade Show in Houston to unveil his new biodiesel approach, named Multi-Energy Optimized Processing.

Under development for four years, the process combines ultrasonic cavitation and microwave heating, which Kropf said reduces the energy required to make biodiesel and the costs associated with catalyst use by enhancing the reaction rates through process intensification approaching supercritical reaction.

MEOP involves the dielectric permeation of material where only the methanol is being heated via microwaves, not the oil, which saves energy. “You don’t need supercritical, you need the methanol stable and

heated at the right frequencies,” he said.

Stable in emulsion, he said the process can get the methanol temperatures up to 145 degrees Celsius. “It’s stable by using the right frequency of emulsion,” Kropf said.

Early on, Kropf converted a kitchen microwave and tied in ultrasonics, but household microwaves are multimode, so he moved on to develop a 10-gallon-perhour pilot using a single-mode microwave.

The process used less than 0.2 percent catalyst, which he said is less than half the industry standard, and only 1 kilowatt of energy for the microwave input with 50 watts of energy input for the ultrasonics.

It achieved 99.8 percent conversion efficiency. The work was then scaled up and demonstrated at 30 gallons per hour.

Kropf ’s research was funded by AE Resources Inc., which holds exclusive rights to the technology. Chris Getty, president of AE Resources, told Biodiesel Magazine that the MEOP biodiesel process only requires 600 Btu per gallon compared to what he said is around 4,200 Btu for conventional biodiesel processing.

Kropf and AE Resources are now looking for partners to take the technology commercial. —Ron Kotrba

The Problem Solver

PHOTO: SOUTHWEST RESEARCH INSTITUTE

A new alternative fuels technology center may have all the answers

LARGE SCALE: The alternative fuels center will work with clients at the bench-scale level all the way to commercialization.

14

BIODIESEL MAGAZINE

z

After a trip to Washington, D.C., to speak with a number of people about alternative fuels, Robert Franick, manager at the Southwest Research Institute (SwRI), decided the idea of developing a “one-stop shop” for alternative fuel issues ranging from emissions to fuel evaluations was a good one. “The more people I talked to,” he says, “the more I realized there are a number of organizations that can do emissions testing, others that can take concepts from the laboratory to commercialization, and others that can run fuel analyses.” But “there are not a lot of organizations that can do all three,” he says— and this is why Franick is excited about the formation of the International Alternative

NOVEMBER 2011

Fuel Technology Center in Texas.

For those seeking help with a biodiesel-related issue, Franick says the IAFTC can take a client’s ideas for biodiesel from conception, to pilot operation and even to commercialization, in part, due to the chemistry and chemical engineering division at the facility. In addition to previous work with biodiesel, the staff at SwRI has also worked with shale, tar sands, coal, cellulosic ethanol and synthetic paraffins. “We can help them work through their problems,” he says, “and that is the key; regardless of what the problem is, we probably have a way of helping them solve the issue.” —Luke Geiver

PHOTO: BIODIESEL OF LAS VEGAS

FRONTEND

ON SCHEDULE: Construction is underway at the 4 MMgy Biodiesel of Las Vegas project with completion expected by the end of this year.

Re-emerging Growth

Evolving industry translates into added efficiencies, market drivers While operational economics may be difficult for some in the biodiesel industry, others, such as Keystone Biofuels LLC, a 20 MMgy multifeedstock facility in Lower Allen Township, Pa., are finding that favorable market conditions, spurred on by state and federally mandated biodiesel volume requirements coupled with the $1 per-gallon federal biodiesel blender tax credit and sustained Renewable Identification Number prices, are creating ideal opportunities to reinvest in their facilities by expanding staff or making significant plant upgrades.

Keystone President and owner Ben Wooten tells Biodiesel Magazine that plant upgrades were always a focus since the company moved its production facility from Shiremanstown to Lower Allen Township in January. The efficiency upgrades made at the plant, according to Wooten, include a methanol recovery system for recapture of methanol in biodiesel and glycerin for reuse, in addition to switching from water-wash to dry-wash finishing. He adds that the installation of demetholizer equipment will increase production capacity from 20 MMgy to 60 MMgy. While the plant is operating on the new upgraded equipment, Wooten adds that he intends to have the plant operate at

half-speed through December to monitor performance before adding 14 new employees in a second shift that will monitor the increase of production volume by early next year.

“When you go through the experience of a new industry, you learn a lot very quickly,” Wooten says, adding that he’s already sold out of product through the end of the year. “With a new plant, we were able to do the things we wanted to have that we couldn’t have in the old plant.”

Wooten says the plant size increased from 15,000 square feet at its old Shiremanstown site to 60,000 square feet in Lower Allen Township. The new plant also features a 26-car rail spur for improved load-in and load-out of product, built-in containment with steam for use during the winter and an additional 1.2 million gallons of biodiesel storage, adding that he managed to finance the upgrades without bank financing.

“That was the biggest challenge,” he says. “Most of the money came through equipment leases and then we sold a small stake in the company to some private investors to raise some capital to finish off what we were doing.”

In Nevada, Biodiesel of Las Vegas has

resurrected its 4 MMgy production facility outside of Las Vegas. The plant, which operated from 2004 through 2008, had closed due to the economic downturn. Today, BLV, a subsidiary of parent company New-Com Inc., has reinvested $65 million in equipment and infrastructure upgrades in order to operate more efficiently and economically heading into 2012, according to Ryan Geurts, marketing specialist for BLV. The plant has its own rail yard for efficient delivery of inbound and outbound product and the company plans to incrementally increase production capacity to 15 MMgy by the end of next year, Geurts says, adding that the company has already taken pre-sell orders for biodiesel and negotiations with high-profile strategic partners are also in the works.

“We’re getting a lot of inquiries and there’s a lot of excitement even with local consumers,” Geurts says, adding the plant is expected to be in full production by end of the fourth quarter. “We’re not open to the public in that sense, but to see that people are jumping onboard excited about an alternative fuel like that makes us feel good about the market.” —Bryan Sims

NOVEMBER 2011

z

BIODIESEL MAGAZINE

15

FRONTEND

Living the Biodiesel Dream They gave up everything for biodiesel. Was it worth it?

The three-member team at Organic Drive, a startup biodiesel production company based in the U.K., approaches its personal expenditures with the same analytical mindset as it would in optimizing yield or batch cycle times. The result of such an approach is a weekly food bill of roughly $5, for all three, according to Tom James, director and cofounder at Organic Drive. Although that weekly food bill might indicate incredible discipline (or sheer lack of appetite), it is, as James infers, a matter of self-inflicted circumstances.

Every member of the team left their consulting jobs where at one time or another each worked on problems related to everything from nuclear reactors to submarines, and of course, biodiesel production. None of the members, which includes Geoff Cunningham and Duncan Morrison, have children or mortgages (they share a bungalow). And, Organic Drive is a reality today

because, as James puts it, the group didn’t want to “wake up” one day and have regrets at not following their passion to make biodiesel because of “inaction, apathy or lack of belief.” Their passion for biodiesel has helped create a 25 metric ton (roughly 7,500 gallons) per week facility that relies on a reengineered ex-brewing vessel as the main reactor.

It might sound like the team is merely living out some kind of fantasy, but James and the team have combined their engineering backgrounds and time at Cambridge University, along with countless trips to other facilities to build and operate a successful plant. In the next two months, according to James, production will increase to nearly 60 tons per week. “It has been operational now since the end of March,” he says of the used-cooking-oil-based refinery. “Most of our time since then has been spent redesigning and rebuilding purification systems,” along with work on yield and batch cycle times.

“We know the statistics on startup company successes, and they aren’t pretty,” James says.

“However, we believe with enough planning and hard work, we can buck the trend.”

The fact that the team has no stockholders to please benefits the team, and James says they’ve been able to move faster in the development process than the average chemical or biofuels company. For instance, he says, the team went from a clean sheet of paper to an operational and proven flash evaporator in just two weeks at a fraction of the cost. The team is also taking advantage of its contacts in North Africa to find untapped sources of used cooking oil, as well as working to develop a noncatalytic, supercritical reactor design for treating brown grease. “We are looking to undergo aggressive growth in the immediate future,” James says, adding that, “if we fail, it will not be for lack of effort.” —Luke Geiver

Feedstock Solutions

PHOTO: IDAHO NATIONAL LAB

Researchers, members of industry unite to report on feedstock densification

FORMULATING FEEDSTOCKS: Researchers at Idaho National Laboratory gather raw biomass for processing during a demonstration of the feedstock PDU for more than 100 industry, academic and national laboratory experts, who attended a DOE-sponsored Biomass Workshop in Idaho Falls, Idaho, in August.

16

BIODIESEL MAGAZINE

z

NOVEMBER 2011

Approximately 100 professionals working in the feedstock and biorefining sectors recently met at Idaho National Laboratory to participate in a U.S. DOE-funded workshop. According to Kevin Kenney, an INL research engineer who served as a principle planner and host for the event, one of the primary objectives of the group was to develop a report for Energy Secretary Steven Chu. “Our objective was to broaden the view of densification from just a mass and energy perspective to include what are referred to as preconversion and formulation concepts.” The group also aimed to engage the development of partnerships that would put INL’s feedstock process demonstration unit (PDU) to work.

The PDU is a full-scale biomass preprocessing system that converts biomass into high-quality feedstock.

“In the simplest terms, it looks very much like a pellet mill, only it’s much, much more than that,” Kenney says.

“It’s a research tool that we use to develop and demonstrate the concepts of preconversion formulations and densification.” Since the unit is commercial scale, it is able to produce feedstock that biorefining companies can use for rather large-scale research purposes. Kenney says the main components of the PDU are grinders, hammer mills, a rotary drum dryer, and a pellet mill.

While Kenney notes that to date the PDU has only been used to process cellulosic feedstocks, he says the system is certainly not limited to any specific feedstock type. For example, the system would work well with potential biodiesel and biobased jet fuel feedstocks such as camelina.

—Erin Voegele

FRONTEND

Statewide Growth

California’s biodiesel infrastructure poised for expansion As California goes, so goes the nation, is the old saying. It might be clichéd, but the Golden State continues to pioneer, leading the country in instituting bold, low-carbon energy policies and infrastructure build-out initiatives, and the California Energy Commission is a driving force behind those efforts.

In September, the CEC unanimously adopted the state’s third annual transportation energy investment plan to help change the types of vehicles Californians drive and the fuels they use. The latest investment plan appropriates $100 million in state funds to leverage funding and investments from federal agencies, research institutions, private investors, auto manufacturers and other stakeholders to advance the CEC’s Alternative and Renewable Fuel and Vehicle Technology Program.

Assembly Bill 118 authorized the CEC to provide approximately $100 million annually over seven years to encourage the development of new fuels and technologies. The 2011-‘12 plan allocates funding to encourage a score of transportation investments for the development of different biofuels, such as biodiesel, including: $24 million to help develop and produce biofuels such as gasoline and diesel substitutes and renewable natural gas; and $3 million to encourage the development of innovative technologies and advanced fuels, including biodiesel derived from new high-productivity feedstocks such as algae.

Funding comes from sources such as the vehicle and vessel registrations, identification plates and smog abatement fees. The CEC’s first investment plan combined $176 million in funds from fiscal years 2008-‘09. The second investment plan, in fiscal year 2010-’11, provided $83 million.

“This innovative transportation investment LOW-CARBON program is unique in the country,” says CEC LEADER: James Boyd, CEC vice vice chairman James Boyd. chairman, says California is working to reduce its greenthe transportation house gas emissions to 80 percent below 1990 energy investment levels by 2050, decrease petroleum fuel use to plan is integral to California’s climate 15 percent below 2003 levels by 2020, and increase alternative fuel use to 20 percent by 2020. policies.

“The funding plan for fiscal year 2011-‘12 builds on two earlier versions, fine-tuning California’s seven-year program to increase alternative and renewable fuels and to test innovative vehicle technologies,” Boyd adds. “An essential element of California’s climate change and energy policies, this program successfully attracts outside investment and promotes sustainable transportation alternatives within our state.” —Bryan Sims

An Increase in Affordability Arizona-based REV Biodiesel LLC recently announced acrossthe-board price reductions for its B99. The reductions average 20 cents per gallon and increase with volume. After the Arizona Use Fuel Refund for the “light class” biodiesel used in noncommercial vehicles, the bulk price of the fuel can drop as low as $2.99 per gallon. According to REV Biodiesel, the price reduction became effective Sept. 9 and will continue indefinitely.

The price reduction means that the per-gallon price of biodiesel can be approximately 80 cents less than petroleum diesel. REV notes that as of Sept. 9, the average per-gallon price of diesel in Arizona was $3.79.

“With increased volume and economies of scale, we have been able to bring down the cost of producing our biodiesel fuel,” says REV Biodiesel President Dan Rees. “We think that passing this savings per gallon on to users is the best way to get more clean biodiesel into the mainstream market.”

According to Rees, the ability of biodiesel producers, including his company, to be able to continue supplying affordably priced biodiesel will depend in large part on the renewal of the $1 biodiesel tax credit, which is currently set to expire at the end of the year.

—Erin Voegele

PHOTO: REV BIODIESEL

Biodiesel producer drops its price

COST REDUCTION: REV Biodiesel has significantly reduced the price of its biodiesel fuel.

NOVEMBER 2011

z

BIODIESEL MAGAZINE

17

Will They or Won’t They?

Will they or won’t they? That’s the question that once again is foremost on the biodiesel community’s mind when it comes to Congress extending the biodiesel tax credit, just as it has been each year since the credit was created in 2005.

Before we get into the discussion, a word of introduction—I am Anne Steckel, the new vice president of federal affairs for the National Biodiesel Board. I look forward to getting to know the biodiesel industry from the perspective of its dynamic membership, and I hope to meet you at the upcoming membership meeting in Washington.

As the membership-driven trade association for the biodiesel industry, we know that some are tiring of the questions surrounding the tax credit and are wondering whether the industry should give up on extending the incentive, particularly with the renewable fuel standard (RFS2) for biodiesel in place. This approach has been suggested because of the annual uncertainty created by the tax incentive’s pending expiration and the turmoil created in 2010 when the credit lapsed.

While we certainly understand the frustration, the industry, together with NBB, believes strongly that the tax credit remains a vital component to our industry’s growth and that the industry should remain steadfast in seeing it extended.

First and foremost, the tax credit and the RFS2 program are two distinct policy programs that work together to benefit the industry. For biodiesel producers, it is necessary to have both policies in place to achieve the greatest on-the-ground benefit. As we all know, the credit greatly improves the economics of producing and selling biodiesel, making it more price-competitive with traditional diesel and opening up new markets across the country. The RFS2 program requires obligated parties to use a minimum of biomass-based diesel in the final diesel fuel or heating oil mix sold to consumers.

The fuels business is profitable for many reasons, but generally it is a low-margin, high-volume marketplace that is sensitive to price fluctuations. Absent minimum volume requirements, the sale and use of biodiesel and other biomass-based diesel would be sporadic and unpredictable based on swings in commodity prices and due to many other factors. We all know that the biodiesel industry is not always profitable and the tax credit helps us push the product from a small biofuels industry into the much larger petroleum market.

This is not easy, and when the credit goes away, it becomes much more difficult.

18

BIODIESEL MAGAZINE

z

NOVEMBER 2011

In the absence of the tax incentive, it may be inaccurate to assume that the RFS2 program and the corresponding RIN program will single-handedly carry the industry past the 1 billon gallon mark, which we hope to meet and exceed in 2012.

We know that the RFS2 program will continue to be questioned on three fronts: adminAnne Steckel, Vice istrative, legislative, and legal. This means the President of Federal program will face scrutiny from policymakers, Affairs, National by the petroleum sector, in the courts, and even Biodiesel Board by some consumers. Already, the American Trucking Association has asked the EPA to waive the RFS2 program in 2012, due to the impact of 1 billion gallons of biodiesel on the price of diesel if the tax credit is not extended. This is important, because the EPA is given the authority to waive the program based on price or availability of feedstock. I think we can all agree these are two issues that will certainly prove difficult as we work with EPA on growing the biomass-based diesel pool beyond 1 billion gallons.

Additionally, our industry has placed a great deal of confidence in the value of the RINs. Currently its value is robust. It has helped move biodiesel into the marketplace, and it has added value to the balance sheet of the biodiesel industry. There is reason to be optimistic today about the future of biodiesel and RIN values in a growing biodiesel marketplace. But there is also a realistic analysis that can be done that has RIN values decreasing as we stabilize our monthly production at just over 80 million gallons to meet the 1 billion gallon marketplace. Next year at this time, we may be in a biodiesel marketplace that is contracting rather than expanding, with decreasing RIN values. In that market dynamic, the tax credit will continue to serve a need, especially when biodiesel producers examine their balance sheets and as they continue to depend on financial support from outside investors.

For all of these reasons, the vast majority of the industry believes the tax credit is well worth fighting for, even in a Washington climate where passing anything will be unusually difficult. To me, the proof is in the pudding. After a disastrous 2010, this is the first year that the biodiesel tax incentive and RFS2 biodiesel program have been in place, working together as designed. And look at what is happening: the U.S. biodiesel industry is having a record year, already doubling

inside

NBB production for all of 2010. Because a healthy biodiesel industry is good for the economy, that means jobs and economic activity.

As your trade association, NBB is leading the charge and working hard to demonstrate the tax credit’s value and persuade lawmakers to extend it, just as we worked closely with the EPA to shape the biomass-based diesel pool within the RFS2 program. We lead on these issues through our membership-driven trade association and grassroots program. We acknowledge it is hard work, but it has paid

dividends. Since 2004, together we have grown the biodiesel marketplace from a 25 million gallon industry to an anticipated 1 billion gallons next year.

Let’s keep the momentum going. I hope to see you in November!

Anne Steckel, Vice President of Federal Affairs, National Biodiesel Board

Meet the DC team National Biodiesel Board staff members represent the biodiesel industry with direct advocacy and lobbying on the Hill but they also coordinate industry efforts on legislative, regulatory and legal matters.

It is absolutely imperative that law makers and regulators on Capitol Hill understand what NBB is and what the biodiesel industry does.

NBB’s core D.C. team is: • Vice President of Federal Affairs Anne Steckel • Director of Federal Communications Ben Evans • Senior Advisor Larry Schafer • Legislative Assistant Chico Matiella As part of their trade association, NBB members have an incredible team of lobbyists and consultants who keep them plugged in on Capitol Hill and in the executive branch. Along with a strong in-house team, our extensive network of contractor firms works diligently in Washington, D.C., and it includes four lobbying firms that specialize in energy, tax, regulatory, and agriculture issues.

Washington Council Ernst & Young Washington Council Ernst & Young is an advisory services group that helps clients manage opportunities and risks associated with the legislative and regulatory process. It covers domestic and international taxation; health care; energy; employee benefits; financial services and other issues. WCEY assists clients in navigating the often byzantine legislative and regulatory process—from committee deliberations, outreach to leadership, and House and Senate floor consideration, all the way to regulatory implementation. Its main function with NBB is focused on tax legislation.

Services include issue monitoring and analysis, lobbying, regulatory affairs, Washington representation, and providing organizational support for trade associations. Its focus on agriculture enables them to specialize in all aspects of farm and international trade policy, renewable energy, biobased products, agricultural research, biotechnology, conservation, and rural transportation, among others. This expertise means that biodiesel is represented in Washington with commodity organizations, farm bill programs and policies, and USDA programs.

Mayer Brown LLP Mayer Brown is a leading global law firm with offices in major cities across the Americas, Asia and Europe. Its presence in the world’s leading markets enables the firm to offer clients access to local market knowledge combined with global reach. They provide legal services in areas such as banking and finance; corporate and securities; litigation and dispute resolution; U.S. Supreme Court and appellate matters; environmental; government and global trade; and tax. In this role, it has most notably assisted NBB with international trade concerns and disputes, and RFS2 litigation from the petroleum industry.

The Alpine Group Alpine Group is the newest member of NBB’s lobbying team.

Founded in 1996, it has become one of Washington’s top lobbying firms, with a specialty in energy and environment issues. In its work for NBB, Alpine tracks energy legislation and issues related to the renewable fuel standard.

Gordley & Associates Gordley Associates provides a full range of government relations services, focused on practice areas related to agriculture.

NOVEMBER 2011

z

BIODIESEL MAGAZINE

19

insideNBB

Where business gets done: 2012 National Biodiesel Conference & Expo NBB's annual conference has become the epicenter for the growing business of biodiesel and that will be more important than ever in 2012. Companies will be making deals that will affect their balance sheet for the entire year, and as production and market demand continue to rise, next year's conference will be the springboard for a great 2012. Whether you are an attendee or an exhibitor, you can't afford to miss this opportunity!

Join us Feb. 5-8 in Orlando for the National Biodiesel Conference & Expo. Early bird registration ends Nov. 18.

“REG has been an annual sponsor of every single National Biodiesel Conference and Expo,” says Gary Haer, vice president of sales and marketing for the Renewable Energy Group, and chairman of the National Biodiesel Board. “On the tradeshow floor, we connect with business partners, vendors, customers and colleagues. Renewable Energy Group is proud to join the National Biodiesel Board again at the 2012 Conference and Expo in Orlando. We will see you on the tradeshow floor!”

You will also be the first to learn about important research, technical updates, regulatory strategies and market forces that affect biodiesel. The 2012 conference will also offer: • A fuel distribution track, with sessions specifically targeting petroleum distributors.

• A one-day sustainability symposium, organized by NBB Director of Sustainability Don Scott, examining issues such as carbon,

The 2012 National Biodiesel Conference & Expo will be the center of biodiesel business for the year. Stay ahead of your competition by registering before the Nov. 18 early bird deadline.

water, ecology, biodiversity and food security, and how biodiesel contributes to solving sustainability problems.

Before the Nov. 18 early bird deadline, registration fees start at $550 per person. Registration includes exclusive access to specially tailored sessions, networking events and keynotes to benefit you and your business.

Visit www.biodieselconference.org today to reserve your place!

Grand opening events a springboard for biodiesel message With record biodiesel production this year, the industry has seen infrastructure continue to grow. A number of NBB members have reopened biodiesel production plants, opened new distribution terminals, and have kicked off new retail locations. As these good-news stories about the industry arise, members have taken advantage of NBB services to help spread the message of biodiesel’s economic, environmental and national security benefits within their local communities.

“It is really important to use every opportunity we can to educate people on the benefits of biodiesel,” said Jessica Robinson, NBB communications director. “Grand opening events are just one of the great ways to showcase the job-creation and economic benefits of the biodiesel industry to local and state leaders.”

In recent months a number of NBB members hosted events that were well attended by legislators, business leaders, environmental advocates and biodiesel industry representatives.

• NBB member Washakie Renewable Energy LLC hosted an open house event and plant tour celebrating the start of its biodiesel production facility near Plymouth, Utah.

• Renewable Energy Group celebrated the official opening of the REG Albert Lea biodiesel plant in Minnesota.

• Metro Energy opened a new state-of-the-art biodiesel and petroleum storage facility at Enterprise Park (EPCAL), Calverton, Long Island, N.Y. 20

BIODIESEL MAGAZINE

z

NOVEMBER 2011

NBB member Metro Energy recently cut the ribbon on a new storage facility, joining a number of companies that have expanded biodiesel infrastructure.

NBB CEO Joe Jobe spoke at the event and the communications team helped with promotions.

• AMERIgreen Energy, Inc. of Lancaster, Pa., worked with students and faculty at the Lancaster County Career and Technology Center to unveil a biodiesel chopper designed and built by the school. The chopper, which runs on recycled-cooking-oil biodiesel from the school cafeteria, led an energy independence convoy of elected representatives and officials to a ceremonial signing of The Declaration of American Energy Independence, in August.

“As the trade association to the industry, we are here to help our members,” said Robinson. “The communications team can help in a number of ways. From promoting events, to helping organize, to finding speakers for the big day, we are happy to help members tout their accomplishments.”

insideNBB

NBB technical team collaborates with railway industry As obligated parties look to blend increasing amounts of biodiesel into a larger portion of the U.S. diesel pool, customers in new markets are beginning to take interest. Biodiesel, as a low-cost compliance option to meet the advanced biofuels requirements of RFS2, is beginning to reach markets where it hasn’t been heavily used previously. As those new markets increase, the desire for information about biodiesel blends and their attributes also increases.

Recently, the U.S. railroad sector has taken an interest in biodiesel—and has asked the National Biodiesel Board Technical Team to help educate them on the impacts of the use of biodiesel blends in their equipment, as well as to put in place plans to address any technical needs or data gaps regarding biodiesel use in railroads.

The U.S. railroad industry, including both freight and passenger divisions, is the third highest consumer of distillate fuel in the United States averaging more than 3.2 billion gallons annually from 2000-'09, with projections of consumption expected to increase in future years.

A significant amount of research and development has gone into the use of biodiesel for other on- and off-road applications, but much less has been done with biodiesel in railroad applications.

Over the past 18 months, the Society of Automotive Engineers Technical Committee 7 set up a subcommittee on Biodiesel in Railroad Applications and the Locomotive Maintenance Officers Association has been investigating biodiesel blends. The NBB technical team, whose focus is to address technical needs and data gaps with biodiesel and biodiesel blends, collaborated with SAE and LMOA to conduct an assessment of the U.S. railroad system. The assessment covered environmental, technical, and regulatory issues associated with implementation of biodiesel (B5 to B100) in the North American railroad system. It had a special emphasis on understanding technical questions or needs for railroad applications that have not already been addressed through existing research, as well as summarized real world biodiesel experience in railroads to date.

A lot of research and demonstration, mostly with high speed onand off-road engines, occurred to secure the standard for pure biodiesel (B100) and biodiesel blends.

“Biodiesel blends meeting specification is a drop-in fuel,” said Kyle Anderson, technical project manager for NBB. “Many of the railroad users were not aware of the tremendous amount of information that went into getting the ASTM standards.”

B5 and lower blends made with B100 meeting D6751 fall under the conventional petrodiesel specification, ASTM D975, and biodiesel is now considered a fungible, drop-in component in petrodiesel. B6 to B20 blends are covered by ASTM D7467. Both D975 and D7467 have been in place since 2008.

“The assessment provides a valuable tool for railroads as they consider using biodiesel blends,” said Anderson. “We were a bit surprised at the level of biodiesel blend use that has already occurred in railroads in the U.S.” In total, more than 3,700 locomotive months of biodiesel and biodiesel blend use with 19 different rail users were identified and sum-

marized, with no major problems being reported by the users. Usage was from a diverse arena of applications including: passenger, commuter/short haul, short line/switching, line-haul, and specialty applications. Use included biodiesel in blends of B5 to B10, B20 to B25, B50 to B100, and B100 over the past 15 years.

“Most of these were not controlled studies with a lot of data collected. Many of the users tried biodiesel for its emissions benefits (i.e. less black smoke) or because it is a renewable, domestically produced fuel—and then they just kept using it,” said Anderson. “Some users stopped buying biodiesel if the price was substantially higher, but all of the folks contacted said they would use biodiesel blends again if the price was similar to petrodiesel.”

The assessment indicated both major U.S. railroad engine manufacturers, GE and EMD, currently support the use of up to B5 meeting ASTM standards. Both desire additional data before moving forward with formal support for B20, and the data contained in the assessment provides some of that information. According to the report, the technical experts at SAE and LMOA identified more work on B20 in the areas of emissions, long-term impacts in low-speed railroad locomotive engines, and sharing of existing technical information with the railroad industry as high priority areas for additional effort.

“We look forward to working with the technical experts within the rail industry to develop the data needed for every railroad company to feel confident using B20 and to secure formal support for B20 from the railroad OEMs,” Anderson said.

NBB welcomes new members Algal Biomass Organization—Preston, Minn.

BTK&S Biodiesel—Giddings, Texas Commonwealth Biofuels—Ipswich, Mass.

FL Biofuels LLC—Fort Meyers, Fla. GeoGreen Biofuels Inc.—Vernon, Calif.

Golden Leaf Energy Inc.—New Orleans Tri-State Biodiesel—Bronx, N.Y. NOVEMBER 2011

z

BIODIESEL MAGAZINE

21

BusinessBriefs Bard Holding Inc. announced the opening of its Calhoun, Ga., facility, the first of multiple manufacturing sites the company plans to operate in Georgia. The company’s global mission is to provide algae as a viable and alternative source to petroleumbased fuels by producing sustainable, green energy accessible to consumers around the world. Bard will direct manufacturing in accordance with a strategic and balanced need for nutraceuticals, pharmaceuticals and the biofuels market. Executives say Bard has developed an integrated algae production system resulting in high-grade algae biomass and valuable oils. It is a closed system that minimizes contamination and is designed for modular, commercial-scale production.

The Cooking Oil Recycling Program of Buncombe County is a unique pilot project to recycle used cooking oil into biodiesel and keep oils and greases out of the wastewater system. Funded by the Biofuels Center of North Carolina, the program is a collaboration between the Metropolitan Sewerage District of Buncombe County, Blue Ridge Biofuels, and Green Opportunities. A new website, www.cookingoilrecycling.org, provides the public with information on the program as well as the location of cooking oil recycling bin locations. The first of 35 recycling bins are located at the Buncombe County Landfill and at the newly opened River District Recycling Center. Waste cooking oils are one of the major causes of costly sewer maintenance in Buncombe Co. These sewer overflows are a potential threat to the environment and take up valuable resources of the local public works budgets. The new program seeks to keep waste oils out of the sewers by diverting them to Blue Ridge Biofuels for processing into biodiesel. MSD was the first major purchaser of biodiesel in

22

BIODIESEL MAGAZINE

z

Companies, Organizations & People in the News

Buncombe Co. and has been using biodiesel in its fleet of 85 vehicles for more than seven years.

Renewable Energy Group Inc.’s board of directors recently announced its succession plan for transition of the company’s leadership positions. The board offered unaniNEW CHIEF: Daniel mous approval of Jef- J. Oh, former frey Stroburg’s request president and to transition from the chief operating officer of REG, is dual position of chair- the company's new man and CEO to the CEO. sole role of chairman.

Daniel J. Oh, currently president and chief operating officer, will transition to the role of CEO and president, and he will join the board. Chief Financial Officer Chad Stone and all other management remain with the company in their current roles.

The Energy Cooperative, a Philadelphia-based, member-owned nonprofit, has launched an initiative to encourage the use of Bioheat. To kick off the Clean Heat initiative, the Energy Co-op is holding a Clean Heat video contest.

Members of the group submitted videos of their experiences using Bioheat. The Energy Co-op will use these videos as a way to promote the use of the biodieselblended heating oil, as well as create more awareness of the renewable heating fuel.

The contest was scheduled to conclude Oct. 20. The co-op heating oil program is largely residential and has been offering Bioheat blends of B2 to B20 to its members since 2006.

NOVEMBER 2011

Alberta-based Blue Horizon BioDiesel Inc. entered into an exclusive license agreement with two undisclosed third parties to utilize a patent-pending technology to convert hydrocarbons and low-grade cellulosic materials into high-grade renewable diesel. As part of the licensing agreement, BH Bio-Diesel has agreed to pay a confidential license fee as well as a royalty per liter of each project’s net sales of renewable diesel fuel. The term of the exclusive license agreement will continue until the end of active use of the technology or the expiration of associated patents. The technology licensed to the company uses a low-temperature, low-pressure, catalytically driven process that’s capable of fractionating complex carbon molecules and polymers into shorter hydrocarbons. BH Bio-Diesel has secured a long-term lease on a facility located in Bruderheim, Alberta, where it will install a 750 liter-per-hour (198 gallon-perhour) pilot unit to validate the technology.

The technology licensed to BH Bio-Diesel is also capable of producing methyl ester biodiesel from canola oil, yellow grease and other fats and oil feedstocks.

Members of the Iowa Biodiesel Board elected Mark Cobb as chair of the nonprofit organization at its annual meeting Sept. 9. Cobb has 32 years of experience in OIL SMART: Mark the oil industry and is Cobb, the IBB's new vice president of Iowa chair, has decades oil industry Renewable Energy, a of experience. biodiesel plant based in Washington, Iowa, which employs 23 people and has the capacity to produce 30 MMgy. He is also president of Cobb Oil, a petroleum distributor

BUSINESSBRIEFS Sponsored by

based in Brighton, Iowa. Cobb Oil was an early adopter of biodiesel, first offering the product in 2002 at the request of farmer customers. Cobb also serves on the board of the Petroleum Marketers and Convenience Stores of Iowa, chairing that group’s alternative fuels committee. Cobb replaces Daniel J. Oh, president and chief operating officer of Ames-based biodiesel producer REG, who served as chair of the Iowa Biodiesel Board for four years.

Milligan Bio-Tech Inc. has raised $8 million for a planned expansion of its 4 MMly (1 MMgy) production facility located in Foam Lake, Saskatchewan, Canada.

The $8 million of newly-acquired capital effectively came in two forms; $4 million were issued through a private offering of convertible debentures and the remaining $4 million were obtained through a senior lending facility. The funds will be used initially as capital to increase production capacity five-fold to 20 MMly and to optimize a canola seed crushing facility that’s co-located on site to enable efficient crush of nonfood-grade canola, which is the primary feedstock in use by Milligan. Upon completion, the expansion, expected to be complete by mid-November, will make Milligan Bio-Tech the largest biodiesel producer in Western Canada.

Evonik Industries AG held a groundbreaking ceremony Sept. 15 for the construction of a new catalyst production plant in Puerto General San Martin, Argentina.

Engineering and design of the facility is complete, and the plant is expected to be operational by the end of 2012 to supply

ready-to-use alcoholates as catalysts for the production of biodiesel, adding that the facility will primarily serve Argentinean and Brazilian markets with an annual capacity of more than 60,000 metric tons. Evonik’s catalyst production plant will be part of a site where Terminal 6 S.A. operates a major biodiesel production facility. A global market leader for specialty catalysts for the production of biodiesel, Evonik started production of a catalyst facility in Mobile, Ala., with an annual capacity of 60,000 metric tons in 2009. The company said it built the plant primarily to serve the growing North American biodiesel market.

Seattle-based biodiesel producer Imperium Renewables and the U.S. DOE’s Pacific Northwest National Laboratory have reported positive results in a joint JET GUY: Former development for the pilot John Plaza, production of bio- head of Imperium Renewables, is mass-based, drop-in working his way jet fuel in the Pacific into the biojet Northwest. So far, ac- business, but he isn't leaving cording to Imperium, biodiesel behind to the novel process has do so. produced a meaningful amount of fuel, which is currently being evaluated to determine if it can feasibly be blended into commercial amounts of traditional, petroleum-based jet fuel. The method being employed involves a catalytic process under development by PNNL, which converts biomass-based alcohols into renewable drop-in jet fuels. Imperium entered into the project in July 2010 through a collaborative research agreement with Battelle, a nonprofit research organization that manages PNNL for the DOE. The work by Imperium and PNNL is being

further developed, led by Roselle, Ill.-based LanzaTech, as part of a recent award from the DOE towards a new biofuel research project. In addition to Imperium, PNNL and LanzaTech, other participants in the consortium include Boeing, National Renewable Energy Laboratory, Orochem Technologies and the Port of Seattle.

Greensboro, N.C.-based Patriot BioDiesel LLC is expanding its operations in response to increased local demand for biodiesel. Once complete, the upgraded facility will have an annual production capacity of between 2.5 million and 4 million gallons.

The expansion is scheduled to be complete by mid-October. Patriot BioDiesel temporarily suspended biodiesel production in early 2010, following the expiration of the biodiesel tax credit. During that time, the company collected and refined waste oil, which was sold to other biodiesel plants.

However, as RIN values increased in mid2010, the plant restarted operations. Patriot BioDiesel purchased the new equipment from Tactical Fabrication LLC. Before the tax credit expired, another company had placed an order with Tactical Fabrication for a biodiesel system. While that company did put a down payment on the equipment, it did not complete the purchase. Rather than installing a new boiler to go with the new production equipment, Patriot BioDiesel elected to go with a unique heating system featuring ceramic elements manufactured

by Innovative Heat Concepts.

SHARE YOUR BUSINESS BRIEFS To be included in Business Briefs, send information (including photos, illustrations or logos, if available) to: Business Briefs, Biodiesel Magazine, 308 Second Ave. N., Suite 304, Grand Forks, ND 58203. You may also fax information to (701) 746-5367, or e-mail it to rkotrba@ bbiinternational.com. Please include your name and telephone number in each correspondence.

NOVEMBER 2011

z

BIODIESEL MAGAZINE

23

SPECIFICATIONS

A SECOND OPTION: ASTM is currently balloting a change to D6751 that would create No. 1 and No. 2 grades of B100.

24

BIODIESEL MAGAZINE

z

NOVEMBER 2011

SPECIFICATIONS

A New Standard for

Quality ASTM contemplates several updates, including a new grade of biodiesel

BY ERIN VOEGELE

NOVEMBER 2011

z

BIODIESEL MAGAZINE

25

SPECIFICATIONS It's been nearly two decades since ASTM International initiated spec development efforts for biodiesel. Since then, the organization has developed specifications for not only B100, but also blends of up to B20. Alterations to specifications for petroleum diesel and oilheat products were also made, allowing blends of up to B5 to be considered fungible components of these fuels.

While ASTM’s actions have helped open the market for biodiesel and biodiesel-blended fuels, Steve Howell, president of Marc-IV Consulting and chairman of the ASTM biodiesel task force, notes the process of spec development is never over. “We continue to improve the specifications as time goes on, as engines change, as petro-diesel changes, and as biodiesel changes,” he says.

“We continue to improve the specs,” just like what happens with diesel fuels.

ASTM currently has several changes to biodiesel and biodiesel-related specifications in the works that are designed to do just that. Most immediately, the organization is moving to develop No. 1 and No. 2 grades of biodiesel. Additional changes that are in various stages of development include a move to increase the amount of residual biodiesel that can be present in jet fuel, which should open up additional pipeline transportation opportunities; the development of a specification covering higher Bioheat blends; and the possibility of altering the organization’s definition of biodiesel to include new technologies and feedstocks.

A New Grade Most people are familiar with the concept of No. 1 and No. 2 grades of diesel. Now, ASTM is addressing

the same concept with biodiesel. “We are currently balloting at the main committee level a new No. 1 grade of biodiesel within D6751,” Howell says. “That grade would be intended to provide a grade of fuel with lower levels of minor components that would address the rare instances where we’ve seen blends of some No. 1 diesel fuel and some biodiesel have instances of filter clogging above the cloud point of the finished fuel.”

According to Howell, the ballot will provide a No. 1 grade of biodiesel that can be used in similar fashion to how No. 1 and No. 2 diesel fuel are used in the U.S. “That’s kind of the whole philosophy behind it,” he says. “Most people will use No. 2 because it works well for just about everybody out there, but in the rare cases where you find that it doesn’t work down to the cloud point with blends, you can try No. 1.”

However, Howell stresses, the new grade would not be specifically for cold weather use. “The No. 1 grade of biodiesel would provide additional assurances that the fuel is going to work down to the cloud point of whatever the blend ends up being,” he explains. “You could have a No. 1 fuel that is not a winter fuel, but what it would do is provide more assurance that with every kind of diesel fuel out there, it would operate down to the cloud point on the blend, wherever your blend ends up being.”

The ballot for that change to D6751 is currently out for vote. “The results will be adjudicated at the December ASTM meeting,” Howell says. “That’s the biggest item on the plate right now.”

Stu Porter, director of BBI Biofuels Canada and ASTM member, notes that the specification changes

TECHNICAL EXPERT: Stu Porter, director of BBI Biofuels Canada and ASTM member, has a long history of working on biodiesel standards.

TECHNICAL LEADER: Steve Howell, president of Marc-IV Consulting and chairman of the ASTM biodiesel task force, says specifications for biodiesel fuels will continue to grow and change to reflect the current state of the industry.

For sale as a single unit in one of Hungary’s strategic industrial zones: Biodiesel plant with 25,000 tons/year capacity (expandable to 50,000 tons/year) together with infrastructure prepared for the expanded capacity; Pressing plant with 40,000 tons/year capacity for rapeseed with 2 silos of 2000 m3 each Logistics park with industrial side track, filling equipment, a 1000 ton oil tank, a 2000 ton biodiesel tank; and permission to establish 2 additional 1000 ton storage tank.

Partner relations: József Katona E-mail: kuratorfelszamolo@gmail.com ; Phone: +36 1 367 86 97

SPECIFICATIONS

PUTTING IT IN THE PIPE: Work is underway at ASTM to increase the allowable content of biodiesel in jet fuel from 5 parts per million to 100 parts per million, which would open up greater opportunity for pipeline shipments.

for the new grade are relatively minor.

Specifically, he says the No. 1 grade would have a flat limit for monoglycerides and lower cold soak filtration test requirements year-round. “Otherwise all of the specs remain the same,” he says.

Porter says that the change is seen as critical to the industry because petroleum companies want to have a standard in place to help minimize and limit their risk during all seasons of operation. While there have been rare instances where dispenser filters have experienced plugging in a few states, Porter notes there are several variables those issues could be attributed to. “One of the things that is always an unknown is, there are a number of different blending strategies for different organizations and different regions around the country,” Porter says. “Sometimes when these things happen, you don’t really know for sure what the root cause is, whether it was because it was splash blended, or because the diesel that it was blended with is more or less aromatic than another one might be. The intent of the specs is to try to make it as unilateral as possible so that, irrespective of poor blending practices, or when good practices are employed, or the

New Velcon Poster

Velcon Filters, LLC Diesel and Biodiesel filtration solutions for fuel quality and cleanliness, crucial factors to guarantee engine performance.

Recommended Filtration for Diesel and Biodiesel Transfer Points

Velcon Filters, LLC Colorado Springs, CO USA www.velcon.com/diesel.html 888.224.0716 719.531.5855 Fax 719.531.5690 vfsales@velcon.com ™

MEMBER

Fuel Filtration and Separation Specialists for over 50 years NOVEMBER 2011

z

BIODIESEL MAGAZINE

27

SPECIFICATIONS range of aromaticity of diesels you would normally find in the marketplace, you wouldn’t have any issues with filter clogging above the cloud point.”

According to Porter, there is also a possibility that this current ballot will be seen as more of as an initial step rather than as a final solution to the two-grade system for B100. “One of the things that has been discussed…is that they see this as a starting point, and want to gather more data and do more testing to get a better understanding of things, but also to look at the potential to add some additional tests once we have a better understanding for maybe a different approach,” Porter says.

While the current ballot would indeed result in two different grades of biodiesel, Porter notes that the differences would be quite minor when compared to the different grades of diesel. “The thing that often gets lost is between No. 1 and No. 2 diesel there are a number of different parameters,” he says. “No. 1 versus No. 2 diesel is lighter in viscosity, it’s lighter in distillation, it’s lower in cloud point. There are a number of parameters in No. 1 versus No. 2 diesel that are different, and the difference between the proposed No. 1 or No. 2 grade of B100 is really just a couple of properties.”

A Better Bioheat ASTM is also working towards the development of a specification for higher blends of Bioheat. However, that work is still in a relatively early stage. That said, Howell notes that it shouldn’t take nearly as long to develop a specification for Bioheat as it did to develop D6751 or D7467. “A lot of the work that was put in to develop the on- and off-road fuel specifications can be cross-applied to heating oil,” Howell says.

“But, there are some things that are special for heating oil that don’t happen in on- and off-road diesel engines. There will be some additional work specific to the heating oil market that we’ll need to do, and industry is actually in the process of doing that.”

The National Biodiesel Board and the National Oilheat Research Alliance have set

28

BIODIESEL MAGAZINE

z

up a Bioheat technical steering committee to guide those efforts, which includes a multifaceted group of equipment companies, petroleum companies, biodiesel companies and technical experts that are identifying what those technical needs are executing against those, he says.

According to Porter, a primary issue with the use of blends higher than B5 in home heating use has to do with the yellow metals and elastomers that are found in some legacy equipment. The furnace equipment manufacturers have been resistant to higher blends because they have some material compatibility concerns, he says. “I think looking at up to a B7 or possibility of B10 or B20 is certainly being discussed,” Porter adds.

Porter also points out that elements such as higher oxidative stability limits might be important to building more furnace equipment manager acceptance of blends higher than B5. “With home heating oil, some folks may buy their oil at the end of one season and not use it till the following season, or vice versa,” Porter says.

“They may store it longer than 6 months, which is the recommended storage, based on the current oxidation stability limits in D6751.”

However, Howell points out that stability might not be that great a concern.

“There are no stability specs for petro diesel for heating oil,” he says. “Very few people realize that home heating oil has its own stability problems, and its own quality issues over the years. Biodiesel stability is one of the questions that the technical steering committee is set to address. If it is something that needs additional attention, there are a lot of stability additives that have proven very effective. You don’t want to add them unless you need them, but if you need them, the stability additives have been shown to be very, very effective in increasing the storage life of biodiesel.”

Howell notes that a big push from NORA has been integral in moving work on the spec forward. NORA has formally issued a vision statement, he says, to move to a 100 percent biodiesel fuel by 2050,

NOVEMBER 2011

which would create an 80 percent carbon emissions reduction when compared to petroleum fuels.

Howell estimates that the development of a new Bioheat specification will take at least a couple of years, but he says it shouldn’t take the full eight it took to create D6751. It will ultimately depend on what the data says, he stresses. “If I knew what the data was going to be before we did it,” he says, “we wouldn’t have to do the [research].”

Additional Actions Several other important actions are in progress at ASTM as well. Regarding pipeline shipments of biodiesel-blended fuel, the organization is working to increase the allowable portion of biodiesel that can be present in jet fuel. Currently, D1655 allows for up to 5 parts per million (ppm) biodiesel in jet fuel. That could increase to 100 ppm in the future, opening up the market for additional pipeline distribution of biodiesel-blended fuel.

“It’s technically illegal for jet fuel to contain any component that is not specifically approved for jet fuel, whether that be an additive or incidental contact with other fuel,” Howell says. “We’re doing a project right now in combination with the airlines and the European and American petroleum refiners and military agencies to approve 100 parts per million biodiesel in jet fuel. That will make it easier to carry biodiesel blends on pipelines that also carry jet fuel.”

According to Howell, work on this initiative is approximately 90 percent complete. “So, far it’s all been positive,” he says. If all continues to go well, the balloting process could be complete in late 2012 or 2013.

“In addition to the jet fuel work, we’ve done a bunch of other improvements that have been incorporated into D6751,” Howell says. “We’ve improved the stability test method for biodiesel and biodiesel blends, and we’ve approved the option of using the AOCS FTIR system for measuring total and free glycerin, cloud point and

SPECIFICATIONS methanol content, which could provide a significant reduction in testing cost for a biodiesel company to meet the spec.” According to Howell, the new test methods are fast, cheap and effective. He says that especially for medium and small producers, the new methods could be an extremely valuable tool. “It will reduce the overall cost of fuel quality and increase the likelihood that companies will do more testing,” he adds.

While Porter notes the changes don’t necessary represent his preferred approach to testing, he does say it was believed to be a positive move for expediency and cost effectiveness. “It was felt that it was a compromise of allowing more testing to be done and more results to be given,” he says. “I’m not sure it’s the best way to go, but that’s why we have a balloting process, and that’s why we have an opportunity for everyone at ASTM to have their say and their vote, and the consensus was it was an overall better thing for the industry.”

Howell also notes that the development of specifications for blends between B21 and B99 is on the committee’s todo-list. In addition, Howell says work is underway to complete engine testing to confirm that the existing specification for metals content is sufficient for full useful life for heavy-duty engines to protect the catalysts. “Most engine companies are quite comforted by the fact that we’re doing that type of work and making sure we are testing over the full 450,000 miles of usage, not just one or two years in the field,” he said.

Finally, Howell confirms ASTM is open to clarifying the terminology for biodiesel. “Right now, the definition of biodiesel in the terminology section of D6751 states biodiesel is a mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, since that covered all the biodiesel that was being produced or contemplated,” he says. “If we need to change terminology to cover mono-alkyl esters produced from sugars or other processes, then ASTM will entertain ballots to change that so that [the ter-

minology] remains feedstock- and processneutral, as it has been designed thus far.”

Porter adds that ASTM has always been open to updating specifications and terminology when there is a commercial need for it. “The intent with the definition of biodiesel was always to be open to change based on the commercial need,” he says. However, if a company were producing a biodiesel blend stock that is not a mono-alkyl ester that does not meet the

current D6751 specification limits, Porter notes that would be an entirely different issue above and beyond simply clarifying terminology, since the current D6751 specification limits were based in consensus and considerable input from original engine manufacturers.

NOVEMBER 2011

Author: Erin Voegele Associate Editor, Biodiesel Magazine (701) 540-6986 evoegele@bbiinternational.com

z

BIODIESEL MAGAZINE

29

GLYCERIN

30

BIODIESEL MAGAZINE

z

NOVEMBER 2011

GLYCERIN

Clearing the Way for Byproduct Quality Why quality for glycerin is just as important for biodiesel

BY BRYAN SIMS

NOVEMBER 2011

z

BIODIESEL MAGAZINE

31

GLYCERIN A high degree of importance is placed on the quality of methyl esters, properly so, particularly when used as on-road fuel. So much so that for

biodiesel product, and what’s left over isn’t something that they have much control over, or the economics aren’t there for them to spend the money to refine that into some kind of a product to get an added value for.”

According to information based on a report authored by the U.S. census bureau, the NBB and brokerage house HBI International, Rice says an estimated 343,000 metric tons of glycerin is projected to enter the market by the end of this year. In 2010, 245,000 metric tons of glycerin was produced, compared to glycerin’s highest production volume ever at 376,000 metric tons in 2008.

Brent Pohlman, marketing director for Omaha, Neb.-based fuels and chemicals testing company Midwest Laboratories Inc., tells Biodiesel Magazine that while the firm isn’t seeing the volumes of crude glycerin samples like it once did during the industry’s boom year of 2008, quality remains a concern.

“It was typical where we would get anywhere from 20 to 30 samples per day,” Pohlman says. “We haven’t seen those kinds of volumes come back since, but we’re seeing that people are more concerned about quality right now.”

biodiesel to be a legally registered fuel additive with the U.S. EPA, it must meet strict industry specifications as prescribed by ASTM D6751 prior to blending with diesel in order to ensure proper, consistent performance. Additionally, the National Biodiesel Board has implemented its own quality assurance program, BQ-9000. Further biodiesel quality specifications in different applications under ASTM requirements include D975-08a for diesel fuels in on- and off-road applications, D396-08b for fuel oils such as home heating oil and boiler applications, and D7467-08 for diesel fuel oil with biodiesel blends ranging from 6 to 20 percent.

With all the stringent quality measures imposed on producers, there is, however, no governing body that imposes or oversees similar quality standards for crude glycerin, the byproduct that’s left at the end of the transesterification process. Most biodiesel production today involves homogeneous alkaline catalysts such as sodium methylate. The transesterification of triglycerides with methanol generates a biodiesel phase and a glycerin phase. Impurities such as catalyst, soap, methanol and water concentrate in the The Different Grades Irrespective of the projected volumes of glycerin this year, it’s glycerin phase, which is typically neutralized with acid, and the catstill an important ingredient and chemical building block for the ionic component of the catalyst is incorporated as a salt. Remaining production of high-volume industrial chemicals such as propylene contaminants such as methanol, soaps and water can render the composition of glycerin to consist anywhere between 40 and 80 percent pure glycerol, depending on the feedstocks and processes employed.

Because of the these differences in purity levels, crude glycerin is viewed as a highly variable commodity from plant to plant, making it difficult for a regulatory body or standards committee to impose any kind of uniform quality standard across the board, says Mark Rice, CEO of Northbrook, Ill.-based chemicals and fuels testing firm Biofuels Technology LLC. “Quality of crude glycerin has to do with everything from the weather to the feedstock that they’re using, to the plant manager who’s on shift, so the glycerin byproduct is very inconsistent and, for the most part in the U.S., is very poor quality,” Rice explains. “It’s a hard product to manage. For some plants it’s all over the board in terms of what crude glycerin means or what that glycerin EBB AND FLOW: Crude glycerin may be viewed as a low-grade byproduct for some, but it's price and product looks like. They are primarily quality are trending upward with additional innovative applications on the rise. making sure that they can make the specification requirement for their ASTM

32

BIODIESEL MAGAZINE

z

NOVEMBER 2011

glycol, epichlorohydrin, acrylic acid and polyhydroxybutyrate.

Biodiesel producers have the choice of refining their crude glycerin into two higher forms—technical or USP grade (U.S. Pharmacopeia)—to get an added value for their byproduct because, as a rule, the purer the glycerin, the higher the market value. The purity requirements for the emerging applications of glycerin vary, and are often intermediate to the crude and refined grades previously established for the classical applications. Biodiesel companies can either refine crude glycerin at their production facility by installing glycerin refining equipment or methanol recovery systems that can strip methanol out of crude glycerol. Producers can also ship their crude glycerin to companies such as Biofuels Technology LLC or Midwest Laboratories for testing and analysis. While some biodiesel producers refine their crude glycerin to technical grade, the majority of them can’t afford it and are left having to dispose of it according to regulatory requirements or sell it at a very low price—between 1 and 8 cents a pound in some cases. Because of its low value, crude glycerin is sometimes used as a dust suppressor on roads or burnt for energy even though its Btu value is low. Interest, however, in finding other applications for crude glycerin, such as a supplement for animal feed, is on the rise. At press time, crude glycerin was selling at 7 cents a pound, according to The Jacobsen, a fuel, feed and chemical commodity pricing and market analysis firm based in Chicago.

PHOTO: REG INC.

GLYCERIN

UPGRADE PRIORITY: REG produces crude glycerin, left, with 80 percent purity at five of its biodiesel plants while one plant in Seneca, Ill., produces technical-grade glycerin.

GLYCERIN “Everyone in the industry has a different brand of crude glycerin,” Rice says. “Because of that, the price that most producers are getting is very low, and if they get a price that’s greater than what the market is, and it seems to be too good to be true, it usually is.”

Technical-grade glycerin usually has a water-white pigment to it and a purity of 97 to 98 percent with most of the contaminants completely removed. Technical grades

of glycerin are usually classified by derivation of feedstocks such as tallow, which are considered lower grade, and vegetable oil-based (or kosher), which are considered higher grade. These two subforms of technical-grade glycerin are typically designated for polyols and alkyd resins markets.

Technical or crude forms can also be further refined to 99.7 percent purity or higher to meet USP-grade glycerin, suitable for food, personal care, cosmetics, pharmaceuticals

DISTILLED TO BE THE BEST

THE CLEAR ANSWER FOR BIODIESEL DISTILLATION Stay ahead of tighter biodiesel specifications Improve cold weather performance

CROWN BIODIESEL DISTILLATION FATTY ACID STRIPPING | EXTRACTION | OIL PROCESSING | BIODIESEL | GLYCERIN REFINING | ESTERIFICATION CROWN IRON WORKS COMPANY Call us today 1-651-639-8900 or Visit us at www.crowniron.com Additional offices in Argentina, Brazil, China, England, Honduras, India, Mexico, Russia and Ukraine

34

BIODIESEL MAGAZINE

z

NOVEMBER 2011

and other specialty applications. At press time, USP refined glycerin with 99.7 percent purity was selling at 43 cents a pound, according to The Jacobsen.

Unlike crude and technical grades of glycerin, the quality of USP glycerin is closely regulated by the Federal Drug Administration and Federal Communications Commission. This assures buyers of the glycerin’s quality that might not otherwise be achieved through physical and chemical testing alone. While it may be produced in similar processes, technical-grade glycerin doesn’t have to be in compliance with USP, FCC or FDA requirements and therefore typically conforms to specifications mutually agreed upon between the buyer and seller.

Quality End-Use Assurance For large biodiesel producers such as Ames, Iowa-based Renewable Energy Group Inc., overseeing glycerin quality, particularly of technical-grade glycerin, is paramount to the overall economics of its operations, says Dave Elsenbast, vice president of supply chain management.

“REG has always looked at glycerin as a coproduct as opposed to a byproduct,” he says. “I think when we look at it that way, we look at marketing our glycerin to the higher value end-markets that we can target, as opposed to disposing of a byproduct at prices that just move the product.

We’re always looking for ways to maximize our biodiesel crush margin, and therefore we take a very serious approach to marketing our glycerin.”

MARKET MIZER: Currently, REG Viewing glycerin as has six operating coproduct rather than a byproduct is biodiesel plants with important to REG's a combined installed scope of business, production capacity according to Dave Elsenbast, REG vice of 212 MMgy. Elsen- president of supply bast says five of those chain management. facilities produce a consistent quality of crude glycerin, while the other, a plant in Seneca, Ill., produces

GLYCERIN technical-grade glycerin. In total, REG produces about 190 million pounds of glycerin a year out of its operating plants.

While crude product may get discounted in the open market, making it difficult for producers to find useful markets for it, Elsenbast advises other producers to regularly test batches of their crude in-house or through third-party labs to maintain quality throughout continuous processing.

“We think of glycerin as a very competitive energy business, and we have to participate and do well every step in the business process,” Elsenbast says. “Certainly, being a consistent supplier of high-quality glycerin and selling that to the high-value market helps us succeed in the marketplace.”

Like REG, Keystone Biofuels LLC, a 24 MMgy multifeedstock plant in Lower Allen Township, Pa., places as much importance on its quality of glycerin as it does fuel. According to President Ben Wooten, his company recently upgraded the facility’s efficiency by installing a methanol recovery system, which has opened new markets for Keystone’s crude glycerin.

“Historically, most of our glycerin in 2010 went down the street to a concrete company that burned it for fuel,” Wooten says. “Now, we’re getting calls from engineering firms that are actually putting out their own quality specifications where some want a certain percentage of methanol, a certain percentage of glycerol and so forth.

We figured if we do a couple steps like that, it opens different markets so we’re not relying on just one.”

By reinvesting in the plant for upgrades such as glycerin purification and methanol recovery systems, Wooten believes this strategy will determine who will ultimately remain profitable heading into next year.

“Those of us that are reinvesting in the plant to get those efficiencies are going to get a better leg up on the ones that aren’t doing that,” Wooten says. “I think you’ll see kind of an evolution, hopefully for those of us that are investing it pays off, and I think those that aren’t could still play in a niche market.”

Plants that have made upgrades like Keystone Biofuels, or those considering this

strategy, may reap the benefits, but Rice suggests that the economics of adding equipment to handle glycerin might be negligible in today’s volatile economy. He adds that dealing with opportunistic glycerin traders who sometimes take it and behave irresponsibly is something producers should consider, because when crude glycerin is sold, “the customer trail ends with them,” he says.

“If biodiesel plants are selling to people that don’t know what they’re doing and don’t

handle their glycerin in a safe and ethical manner, it could come back to bite them in a really bad way,” Rice adds. “Understanding the technicalities of glycerin, where it goes and knowing the composition of it is very important and often overlooked.”

Author: Bryan Sims Associate Editor, Biodiesel Magazine (701) 738-4974 bsims@bbiinternational.com

Fast, Accurate Blend Ratio Measurements • Biodiesel in Diesel • Ethanol in Gasoline

Increasing mandates require accurate blend ratio measurements of biodiesel in diesel fuel and ethanol in gasoline to ensure product quality. Distributors, engine manufacturers, fleet operators, regulatory agencies, or terminal managers need an easy-to-use analyzer to ensure a correct blend.

An InfraCal Biodiesel or Ethanol Blend Analyzer gives you: • 100 ppm biodiesel measurement now available • Measurement results in under 30 seconds with no sample preparation • Portability for on-site measurements • Proven technology currently in use by major petroleum terminals and regulatory agencies • And, assurance your blend quality meets specifications

To learn more, visit our web site: www.wilksir.com or call: 831-338-7459 or email: srintoul@wilksir.com ®

simple analytical solutions

Wilks Enterprise, Inc. 25 Van Zant Street, Suite 8F East Norwalk, CT 06855 USA TEL: 203-855-9136 FAX: 203-838-9868

NOVEMBER 2011

z

BIODIESEL MAGAZINE

35

TESTING

36

BIODIESEL MAGAZINE

z

NOVEMBER 2011

TESTING

EASIER

THAN EVER Testing services are abundant, and there’s a reason why

BY LUKE GEIVER

NOVEMBER 2011

z

BIODIESEL MAGAZINE

37

TESTING

option to outsource product testing on any sample, from cloud point to total glycerin, and save hundreds of thousands of dollars on the required equipment. For large producers, it’s no different. A sample can be shipped overnight, tested, and returned the next business day giving an almost instant readout of the process’ effectiveness at making a quality, on-spec fuel. And for the qualified do-it-yourselfer, an array of testing equipment is available to make any biodiesel production facility lab top of the line.

Several leading biodiesel testing and analytic service providers operating in the industry today spoke with Biodiesel Magazine about modern testing practices, how the industry has changed, and why the industry may grow in the future.

PHOTO: RON KOTRBA, BBI INTERNATIONAL

Biodiesel testing services and analytical solutions have never been easier to access. Small producers have the

OPEN HOUSE: In 2009, REG Inc. held an open house at its feedstock characterization laboratory in Ames, Iowa, where high-tech testing equipment fills the room.

John Coonfare cares about state incentives, cheap feedstocks and clients who can pay their first bills on time.

Coonfare is the biodiesel lab manager for Midwest Laboratories Inc. He’s been testing biodiesel since before the boom years in Omaha, Neb., and for him, change in the industry is a good thing.

Around 2008, his team received as many as 20 to 30 samples a week from separate producers, and at that time, he says, he didn’t always know what he was going to get. At one point, Coonfare had to be extra careful when testing because some producers were unwilling to disclose the contents used to make their fuel. Because of that, he was once almost injured when a sample containing gasoline caught fire near a lab burner.

But today, after the ramped up testing requirements linked to the everexpanding list of ASTM specs, things are different for his team. “I think the samples are a lot better,” he says, and now, established companies rarely have

38

BIODIESEL MAGAZINE

z

IN-HOUSE OR OUTSOURCE? While some producers find more value in on-site lab testing, others use third-party labs to get the job done.

NOVEMBER 2011

PHOTO: RON KOTRBA, BBI INTERNATIONAL

Change is Good

TESTING

Although changes brought on by the onset of new testing procedures like cold soak filtration and the weeding-out effect created by the inconsistent tax incentive have made the industry stronger, they have also made it more difficult for new biodiesel startups to be successful, Coonfare says, at least if they want to test their own fuel.

an issue with their fuel unless “some major glitch happens.”

The change in fuel quality isn’t only about the expanded role and testing requirements of ASTM. Coonfare believes that the fluctuations in the biodiesel tax incentive policy, which have created an atmosphere of uncertainty based on the onagain off-again history of the credit, have actually helped eliminate the type of companies that put his testing team at physical risk and the overall biodiesel industry in question due to low-quality, hazardous fuel produced from unproven methods. “A lot of the smaller businesses (doing just that) couldn’t handle losing the tax break,” he says.

Although changes brought on by the onset of new testing procedures like cold soak filtration and the weeding-out effect created by the inconsistent tax incentive have made the industry stronger, they have also made it more difficult for new biodiesel startups to be successful, Coonfare says, at least if they want to test their own fuel. “I know a lot of people want to get certified and get their lab certified, but it is hard,” he says. By hard, Coonfare means financially difficult. As another member of the Midwest Lab’s team explains, some of the gas chromatography equipment typically used to test biodiesel can be very expensive. Companies could save so much money if they outsourced their tests, the two agree, for a number of reasons.

For instance, a basic testing package offered by Midwest Labs that includes testing for flash point, sulfur, free glycerin, total glycerin, oxidation stability, phosphorus, carbon residue, cetane and a number of other variables, costs $800. A typical company may perform two to three tests per week, or the financial equivalent of one employee. Basic math shows that expensive equipment and expensive labor costs due to the skill required in running such equipment doesn’t equate to financial gain. As an example, they offered up a biodiesel production company that purchased two GCs that have only collected dust as the company struggled to get up and running. “It is hard in this day and age to get started,” Coonfare points out. And instead of worrying about running testing equipment, he feels young companies might be better off outsourcing their testing.

Renewable Fuels Group West Des Moines, Iowa renewablefuels@fcstone.com 800.422.3087, ext. 7419

NOVEMBER 2011

z

BIODIESEL MAGAZINE

39

PHOTO: RON KOTRBA, BBI INTERNATIONAL

TESTING

REFEREE: If there are any calibration or other concerns with the QTA test methods recently approved

by ASTM, the wet chemistry methods will be the referee.

Contact us to request a FREE 2011 CATALOG

Manufacturer of Complete Line of Biodiesel Testing Instrumentation :`JHTVYL (]LU\L )VOLTPH 5L^ @VYR ;LS! -H_! ,THPS! IPVKPLZLS'RVLOSLYPUZ[Y\TLU[ JVT www.koehlerinstrument.com 40

BIODIESEL MAGAZINE

z

NOVEMBER 2011

QUICK TURN AROUND: Kangming Ma, business director for QTA, says ASTM's adoption of the QTA test method for glycerin, methanol and cloud point have really benefited producers.

A simple overnight delivery via UPS can ensure a small, plastic vail of product is on-spec and doesn’t have to be relegated to the unfit-for-use category.

1-Drop Wonders

Although the Cognis QTA biodiesel test based on infrared spectroscopy may not provide every single testing option when compared to that of different methods used by people like Coonfare and company, there is no arguing that in an astounding two minutes the QTA version is the quickest way to test biodiesel for methanol, cloud point, total and free glycerin. The testing method has been available for more than three years, and in that time, it has been used to test more than 3,000 samples per month, one drop at a time. “It has helped [producers] tremendously in how easy the testing can be done and how quickly they can get results,” says Kangming Ma, business director for QTA. ASTM recently approved the QTA approach as an alternative test to the wet chemistry method.

The QTA system is based on a series of advanced algorithms, and differs from other testing approaches in a number of ways. For one, the testing approach utilizes a central database located in Ohio that receives data inputs via the Internet from anywhere in the world before running a test and producing a report (in two minutes), which is then returned to the user and doesn’t require sample preparation or a skilled operator. One drop of biodiesel is simply placed on the device’s clear screening area and the operator hits send. In addition to that, the system does not require people at a facility to be highly trained in how to read the reports, Ma adds.

TESTING Put that into perspective, he says, and producers can have real-time results about their production process and may not have to waste feedstock. “What the industry and manufacturers are interested in are rapid and quick measures that they can rely on for their daily measures,” he says.

“If it is found that their product is out of spec, the cost is huge.”

The needs of the industry have helped the QTA team further refine the testing process and expand on the database of samples, Ma says, something they hope to continue. And it’s that attention to detail and passion for providing what the industry needs that has formed the opinions of both Ma and Coonfare, each of whom have their own thoughts on what it will take for the industry to remain at production level highs, now and into the future.

“We have more customers this year,” Ma says, “and just by looking at that, we could say the industry is turning around.”

More importantly, he explains, don’t let the possibility of an expired tax credit at the end of 2011 scare you. “There is always a debate about the incentives, but most of our existing clients, or our believers,” Ma says, “follow the mandate of the RFS2 rather than the incentive.” As long as there is a mandate, he says, “there is always a demand.”

For Coonfare, along with the mandate, one of the factors his team follows is the support for biodiesel at the state level, which he says shows that biodiesel is strong and getting stronger. “That is going to help,” he says, “but there needs to be an abundant, cheap feedstock that is easier to work with.” While he acknowledges that cheap feedstock is always a concern, he also points to news that a 50 MMgy biodiesel plant is scheduled for construction in the next two years as an example of why his team is still working hard to provide the biodiesel testing services it does.

“Many people now are starting to get back in the market.”

And Coonfare is right. Mark Hall, Alabama Cooperative Extension Services

sustainable energy specialist, has received so many calls from startup biodiesel producers and cities in Alabama seeking information on biodiesel testing that he teamed up with Tim McDonald, associate professor of biosystems engineering at Auburn University, to explain the basics of biodiesel testing.

“We aren’t talking about biodiesel to sell, we are talking about biodiesel to use,” Hall explains. “If you are going to make your own biodiesel, what testing do you need to do?” As McDonald explains, the answer for those cities looking to make biodiesel for their own fleets without intent to sell is to look at total and free glycerin, and the pH of the fuel. After basic tests are performed to provide a general sense of the fuel’s quality, the best way to further test the fuel, McDonald says, sounds a lot like something a professional biodiesel lab technician might say. “The best way, the

ASTM way, is to run it through a very complex analysis tool, a gas chromatograph,” which he says requires a Ph.D. in chemistry.

It might be easy to agree with the perspective of Coonfare or Ma who argue for the use of their services over in-house testing given the requirements, but that might be missing the point. Whether it is cities in Alabama looking to produce biodiesel for their own use, a new facility in Nebraska, or an existing company looking for up-tothe-minute updates, biodiesel testing services have never been easier to get. There is no algorithm or doctoral degree needed to explain that—unless one doesn’t understand the basic principles of supply and demand.

Author: Luke Geiver Associate Editor, Biodiesel Magazine (701) 738-4944 lgeiver@bbiinternational.com

SIMPLICITY Turnkey Biodiesel Technology

EXPERIENCE 12 operating Biodiesel plants.

EXPERTISE Process (catalyst free and with catalyst), Distillation columns, Automation

COMPATIBILITY 0% to 100% FFA

OPTIMIZATION Maximum yield, efficiency and best in the class technology

RANGE Traditional process (Esterification and Transesterification) to Advanced process (catalyst free)

JatroDiesel, Inc. 845 North Main St., Miamisburg, OH 45342 Phone: (937) 847-8050 ext. 201 | www.jatrodiesel.com | sales@jatrodiesel.com NOVEMBER 2011

z

BIODIESEL MAGAZINE

41

POLICY

REACHING OUT: U.S. Rep. Blaine Luetkemeyer of Missouri, right, discusses policy issues with National Biodiesel Board CEO Joe Jobe during a visit to NBB's headquarters in Jefferson City, Mo. PHOTO: NBB

42

BIODIESEL MAGAZINE

z

NOVEMBER 2011

POLICY

The

Uncertain Tomorrow

Expiring biofuel tax credits and a dysfunctional Congress

BY RON KOTRBA

Several major biofuel tax incentives are set to expire at the end of this year, including the $1 per gallon biodiesel blender credit. Petroleum has enjoyed tax breaks for years, even though the 100-plus year old oil and gas industry reaps record profits quarterly. The Center for American Progress recently stated that the top five oil companies—BP, Chevron, ConocoPhilips, ExxonMobil, and Shell—have combined on-hand cash resources totaling $59 billion. Between that and nearly $1 trillion (that's a one with 12 zeroes) dollars in combined profits over the past decade, why they need tax breaks at all, especially $41 billion over the next 10 years as President Obama said he will strive to eliminate, is a mystery to everyone. Obama wanting to eliminate oil and gas tax loopholes and Congress actually doing it, however, are two different things. Anne Steckel, the National Biodiesel Board’s new vice president of federal affairs, says oil and gas subsidies add up to more than $4 billion a year. “We certainly believe that if Congress can find resources to encourage an entrenched and highly profitable oil industry,” she says, “it can find resources to support cleaner alternative fuels.” Capitol Hill’s iron triangle, however, is strong and oil lobbyists hold much influence.

“Is our tax policy a bunch of special interest loopholes or is it aligned with the objectives of the U.S.?” asked president of the Advanced Biofuels Association Michael McAdams at the International Biorefining Conference & Trade Show in Houston in September.

In addition to the favorable tax credits the oil and gas industry receive, McAdams brings to light another point of contention with the policy structure associated with petroleum: greenhouse gas emissions reductions—or lack thereof, to be more precise. “Ironically, the only industry in the U.S. regulated by GHGs is the advanced and cellulosic industry,” he says.

NOVEMBER 2011

z

BIODIESEL MAGAZINE

43

POLICY The irony, says Joe Jobe, CEO of the NBB, is that “everyone knows that America’s singular addiction to oil has dramatically dangerous direct and indirect impacts” including “watching oil run up to almost $150 per barrel in the spring of 2008, which contributed to the biggest economic recession since the [Great] Depression. It includes turning on the television and watching the Gulf of Mexico on fire in 2010. It includes America’s current involvement in three different wars right now in three different countries whose strategic interests for America all include oil … Clearly biofuels are being held to a different standard in terms of GHGs and indirect environmental impacts … Either estimate indirect impacts for all fuels, or for none.”

But given Congress subsidizing an obviously profitable oil industry, coupled with subjecting biofuels to stringent GHG emissions reductions while the petroleum industry has none, in addition to expiring biofuels tax incentives that are critical to continued development and U.S. objectives of energy security, Congress’ actions have made one thing clear: the possibility of anything moving through the gridlocked legislative body this year is slim to none. The dysfunction in Washington is evidenced by the development of a super committee of 12 to do what the 535 elected senators and representatives couldn’t do: get our government’s runaway debt and financial situation under control.

“This is an unusual time in Washington,” Steckel says. “Many of the old rules that have applied in the past seem to be getting thrown out the window. There is obviously a sharp focus on NEW BLOOD: Anne reducing deficits, but with Steckel is NBB's new deep divisions over how VP of federal affairs. to do it and how far to go.

That’s creating tremendous uncertainty surrounding what Congress can ultimately pass and, frankly, a very difficult environment for any tax or spending measures.”

While the ethanol industry is preparing to enter a new world without its longtime 44

BIODIESEL MAGAZINE

z

and successful blend credit of 45 cents per gallon (previously it was 54 cents), the biodiesel industry has been there before. What we’ve all learned about the U.S. biodiesel complex from 2010, the worst year in our industry’s history when almost 12 months without the $1 per gallon blender credit shuttered plants and halted production, is how resilient our industry is. During that time, plants that did remain open and producing were able to do so thanks to strong state policies, such as the Minnesota mandate and the Illinois fuel tax exemption for biodiesel blends above B10. “But the experience [of 2010] also reaffirmed just how vulnerable our industry still is,” Jobe says, “and how important federal policy is in helping it succeed. People forget—we’ve had commercial-scale production for only about six years compared with a petroleum industry that has enjoyed policy support and been entrenched in our economy for decades.”

McAdams says if the biofuels industries must face a future without tax credits, then it’s time to lay them all on the line, including oil subsidies, and start fresh. After all, our current national biofuel tax provisions are inconsistent, McAdams points out. “One’s a blender credit, another is production, others yet are feedstock credits,” he says. “It’s all over the board.”

Biodiesel Policy Priorities The NBB’s No. 1 policy priority right now is the successful implementation of RFS2—and extension of the tax credit is at the heart of this strategy, Jobe tells Biodiesel Magazine. “The RFS program faces a three-pronged attack,” he says. “It faces on-going legal challenges, administrative challenges with waiver requests, and it will face political challenges with current and predicted legislation calling for various modifications or repeals to the program … The best defense for all three categories of attack would be the extension of the biodiesel tax credit. Without it, we know there would be a more robust effort by some of our critics to chip away at the program,” chiefly because the credit makes biodiesel cost competitive with biodiesel.

“There are still some people out there who

NOVEMBER 2011

have suggested that we abandon the tax credit and focus all our resources on defending the RFS,” Jobe says. “This approach ignores that the RFS and the tax credit are complementary policies designed to work together.” Let’s not forget, also, that 2011 is the first year in history these two policies have worked in tandem, and as a result the industry is producing record volumes. “Of course, we know that having the tax credit lapse for a time creates extraordinarily undesirable business uncertainty. But killing the tax credit would not reduce uncertainty, it would increase it. It would put all our industry’s eggs in the RFS basket.” Jobe says RFS2 was extremely hard to get passed with a specific role for biodiesel. “It was difficult for us to achieve advanced biofuel status under the program and make no mistake, it will be difficult to defend the program,” but as it goes forward, and as volume levels increase, the attacks will continue, Jobe says, “and likely become increasingly fierce. We will need every tool available to defend it.”

Steckel adds, “The RFS is an incredibly important policy for our industry, not just in that it includes a biodiesel requirement but also that it designated biodiesel as an advanced biofuel. It is imperative that Congress stand behind the programs.” She also highlights how important the farm bill programs have been over the years providing much-needed policy support to the biodiesel industry and, she says, “we will continue to advocate for a strong energy title in the next farm bill,” one that includes both the Biodiesel Education Program and the Advanced Bioenergy Program.“While we understand the pressures that Congress is facing and agree that deficits should go down, we think there is a very compelling case for extending the biodiesel tax incentive,” she says, “particularly in this kind of economy where most people believe Congress’ top priority should be helping create jobs.”

And speaking of fuel tax credits and jobs, the Center for American Progress noted recently that the House Natural Resources Committee Democrats found that despite generating $546 billion in profits between 2005 and 2010, ExxonMobil, Chevron, Shell, and BP combined to reduce their

POLICY U.S. workforce by 11,200 employees over that time. In 2010 alone, the big five oil companies reduced their global workforce by a combined 4,400 employees, while making a combined $73 billion in profits.

“Clearly, the biodiesel industry creates jobs,” Steckel says, referencing the 31,000 employees who will be supported by our industry in 2011 alone. “Congress is looking for ways to stimulate the economy, and the biodiesel tax credit is one of those items that Congress understands is good for the economy.”

And that approach of aligning biofuel incentives with broader U.S. objectives— job creation, economy revitalization, energy security, improved environment—is critical to the vitality of future federal policy support for the biomass-based fuels industries, experts say. “How do we craft biofuel policy that’s in alignment with the goals (reducing GHG emissions and reliance on foreign oil) of the U.S.?” McAdams asks. In that vein, maybe future tax policy should consider approaches such as fuels that produce fewer emissions should receive greater subsidies, he offers, or maybe the more energy dense a fuel, the more credit it receives.

But whichever direction future biodiesel and other advanced biofuel tax policy takes, there is no question what happens when it goes away completely: Plants close and thousands of green-collar jobs are lost.

“Specifically,” Jobe says, “U.S. biodiesel production plummeted by 42 percent, resulting in the loss of nearly 8,900 jobs and a drop in household income of $485 million.”

When it was reinstated at the end of 2010, in just a few short months the industry was producing at record capacity. “With the ongoing economic downturn,” Jobe says, “now is not the time to allow that to happen again. Under projected expansion by 2015, biodiesel is expected to support more than 74,000 jobs, $4 billion in income, and some $7.3 billion in [gross domestic product],” according to a recent economic study.

“That growth will be severely jeopardized by the expiration of the tax incentive, and we strongly encourage Congress to provide a seamless extension of the biodiesel, renewable diesel and biojet tax credit.”

“At this point,” Steckel says, “there is a lot of wait-and-see regarding what the deficit super committee will do. Once their path is clearer, we think there could be some openings for moving legislation,” she says.

“Though it’s too early to say what those vehicles might be, we are resolute to do all we can so the tax credit is best positioned, should any opportunity arise.”

The NBB launched its biggest program to date, the Advanced Biofuel Initiative, a comprehensive national communications campaign including a nationally aired tele-

vision commercial. “It’s already having a significant impact,” Jobe says, urging biodiesel producers to personally join the fight in defense of RFS2 through extension of the biodiesel tax credit by calling their senators and representatives. “Members of Congress should be as motivated by biodiesel as we are,” he says, “and that will only happen if every biodiesel plant does its part.”

Author: Ron Kotrba Editor, Biodiesel Magazine (701) 738-4942 rkotrba@bbiinternational.com

Quality Testing at the Speed of Light

Quality Trait Analysis

The QTA System includes an infrared spectrometer and a user interface that connects you to the technical expertise and systems to provide highly accurate quality data on your products, raw materials, by-products, and in-process streams.

■

AOCS Ck 2-09 Approved for Methanol, Free Glycerin, Total Glycerin and Cloud Point

■

Very low cost per sample

■

No sample preparation

■

Excellent accuracy and consistency with industry standardization

■

Requires fewer technical resources for quality control

■

Technical service available 24 x 7

■

Background system monitoring

Contact QTA for more information

1-(866)-yourQTA www.qta.com • help@qta.com 4900 Este Ave., Cincinnati, OH 45232

NOVEMBER 2011

z

BIODIESEL MAGAZINE

45

BIOHEAT CONTRIBUTION

Will NYC Homeowners Embrace Bioheat as the Evolution of Oilheat?

Focus group illuminates what petroleum marketers are missing

BY PAUL J. NAZZARO

A public opinion research company recently pulled together 12 New York oilheat customers to hear what they thought of oilheat, biodiesel and Bioheat. Those of us watching from behind the glass witnessed a transformation unfold as the focus group members made one thing very clear: Virtually every consumer objection to oilheat can be overcome with Bioheat. In fact, by the end of the night, some of the biggest oilheat detractors in the room said they would call their fuel dealers and ask for Bioheat. In an industry that watches its market share slip away to natural gas little by little each year, the results of this public opinion research should be a wakeup call to any oilheat dealers not making Bioheat a part of

their business. This research should also reinforce to biodiesel producers that this potential 800 MMgy market could be a powerful stabilizing influence on the biodiesel industry. This is a market that wants and needs our product.

Frank M. wears a suit, sitting at the front of the U-shaped table, joining the focus group after a day at the office in the financial district.

He has a wife and a two-year-old son at home in Fresh Meadows, N.Y. When the facilitator asks him how he likes oilheat, he says he looked at switching to natural gas, but found it cost-prohibitive. So he stays with oilheat, saying it is easy and by and large, he trusts his supplier. It becomes clear Frank doesn’t feel very warmly towards oilheat. Rather, he tolerates it. He rattles off his concerns, which are nothing new.

Philip R., a homeowner in Queens, grew up with natural gas, and made no bones about how he felt about oilheat. “It’s dirty, noisy, smelly,” he said.

By the end of the focus group, after hearing about biodiesel and the benefits of Bioheat, both Frank and Philip had done a turnaround. They said Bioheat would make them feel better about their home heating, and they would be willing to pay more for it.

This dramatic transformation should catch the attention of any petroleum marketer. (Although the focus group was a small sample, statistically there will be many other customers out there who feel the same way).

Bioheat fuel is made from a combination of biodiesel and heating oil, making it a superior product for the environment, as

The claims and statements made in this article belong exclusively to the author(s) and do not necessarily refl ect the views of Biodiesel Magazine or its advertisers. All questions pertaining to this article should be directed to the author(s).

46

BIODIESEL MAGAZINE

z

NOVEMBER 2011

BIOHEAT

BIOHEAT EXPERT: Paul Nazzaro, a fuel specialist for Advanced Fuel Solutions and petroleum liaison for NBB, is well known throughout the industry as a leader.

well as for the overall operational enhancement of the heating system. The most common blends of Bioheat today are B2 and B5. The ultimate goal, however, is to gradually move consumers to higher blends. In fact, the National Oilheat Research Alliance has voted to move the oilheat industry in the direction of 100 percent biodiesel by 2050.

Overcoming Objections Let’s take a look at common homeowner objections to oilheat one by one, and how switching to Bioheat offers a clean sweep of solutions.

Oilheat objection: “It’s dirty.” Bioheat solution: Biodiesel is clean-burning. It reduces all emissions in an oilheat system, including NOx. Biodiesel reduces greenhouse gases by more than 80 percent compared to petroleum products, making it the nation’s only advanced biofuel that is commercially available. It is less toxic than table salt and biodegrades as fast as sugar in water.

Oilheat objection: “It’s noisy.” Bioheat solution: Biodiesel has higher cetane than oilheat, helping to improve combustion efficiency. It also has the highest Btu content of any alternative fuel.

Oilheat objection: “It’s smelly.” Bioheat solution: Biodiesel has a pleasant odor.

Oilheat objection: “It’s made from foreign oil.” Bioheat solution: Biodiesel is domestically produced from renewable, sustainable resources. Every gallon of biodiesel we use displaces the equivalent of foreign oil.

The biodiesel industry is expected to support 31,000 U.S. jobs in 2011 and contribute $1.7 billion of income to be circulated throughout the economy.

Naturally in this economy, price was a

hot topic among the 12 New Yorkers participating in the focus group. Some of them knew to the penny how much they were paying for their oilheat. Biodiesel economics make Bioheat competitively priced right now, due to the federal and state policies in place.

This means that even if an oilheat state doesn’t have a Bioheat mandate, dealers should not sit idly waiting for one, because RFS2 is a powerful market driver. Our message to oilheat dealers is simple: “If you haven’t made Bioheat a part of your business, you are losing a valuable market opportunity to create long-term satisfaction of your customers.”

After watching a short video on Bioheat and discussing its benefits, 11 out of the 12 consumers in the focus group said they would use Bioheat if it didn’t cost them more than oilheat alone. Others, including Frank and Philip, said they would even pay more. Here’s what else the group had to say about switching to Bioheat: “The video we watched said it has cleaner emissions in the house and helps with things like asthma. We have asthma in our family. So if it’s healthier, I would try it.The sludge in the oilheat tank is not healthy for us.” (Anna A., Queens, N.Y.); “All things being equal, I would choose Bioheat.” (Wanda H., Bronx, N.Y.); “I’m the cheapest guy in town. But if it’s better in every way, that’s value. Isn’t it worth a couple of cents more with all the benefits?” (Phil R., Flushing, N.Y.).

The Evolution of Oilheat What New Yorkers think of Bioheat is important to understand because starting next October, all heating oil sold within New York City will contain at least 2 percent biodiesel. New York City consumes 1 billion gallons of heating oil annually, more than any other city in the United States. The legislation will replace 20 million gallons of petroleum with an equal volume of renewable, sustainable, domestically produced biodiesel.

Shoring up support for Bioheat will help en-

sure this landmark legislation is successfully implemented and viable for the long run.

To that end, the focus group participants also got a sneak peek at the new Bioheat advertising campaign that the National Biodiesel Board, with additional funding from the Nebraska Soybean Board, is rolling out in New York City. This will include Bioheat billboards on city buses, posters on the subways and Bioheat radio commercials.

The theme of this campaign is “Bioheat: The evolution of oilheat.” This message resonated with the entire focus group, from the plumber’s daughter to the law firm headhunter to the homemaker. They said it made them think of: “The next step. Progression. Enhancement.” Additionally, through NBB funding, a robust line of marketing materials is available to oilheat dealers at no cost while supplies last. These free marketing pieces include brochures, door hangers, postcards, Q-and-A and more. Dealers can contact their local oilheat association group, or Advanced Fuel Solutions, and ask for the literature menu to review the materials and place an order.

The focus group participants were very clear that Bioheat interested them. After learning about the product, 11 out of 12 said they wanted more information from their dealer. That’s a powerful statement about Bioheat’s market potential.

Now I can ask dealers: When was the last time you were invited by more than 90 percent of your customers to provide them with information on anything new? Bioheat represents a golden opportunity to change the way customers feel about oilheat. In turn, it could provide a sure market for biodiesel producers, helping to fill in demand gaps in winter, and serving as an insurance policy against the whims of legislators.

Author: Paul J. Nazzaro Fuel Specialist, Advanced Fuel Solutions; Petroleum Liaison, NBB paulsr@yourfuelsolution.com

NOVEMBER 2011

z

BIODIESEL MAGAZINE

47

BIODIESEL MARKETPLACE Ag Products & Services

Construction

Equipment

Fabrication

Turner BioDiesel 715-288-6480

www.turnerbiodiesel.com

Expellers

Andy J. Egan Company 616-791-9952

Associations/Organizations

Raptor Technology Group 321-274-9675

Red River Valley Clean Cities 651-227-8014 www.CleanAirChoice.org

Plant Construction

Twin Cities Clean Cities Coalition 651-223-9568 www.CleanAirChoice.org

AP Fabrications 870-673-8504

Chemicals-Catalysts

Consulting

Bases

Business Plans

BASF 724-538-1358

www.inorganics.basf.com

Evonik Degussa Corporation 732-651-0001 www.degussa-biodiesel.com Methanol of Orlando 407-234-1788 SMOTEC PLUS Co. 201-506-9109

www.raptorfe.com

www.apfabrications.com

Greasemasters, LLC 321-202-6688 www.greaserecycling.com

Public Relations Stout Solutions Group, LLC 501-833-8511 www.stoutsolutionsgroup.com

Filtration Equipment

jmm@arllc.org

Education www.smotecplus.com

Cleaning

Bismarck State College 701-224-5735 www.BismarckState.edu/energy Biodiesel Education Prog. Univ. of Idaho 208-885-7626 www.biodieseleducation.org

Ductwork Hydro-Klean, Inc. 515-283-0500

www.andyegan.com

www.hyrdo-klean.com

Employment

Emergency Spill Response

Recruiting

Hydro-Klean, Inc. 515-283-0500

Executive Leadership Solutions 800-485-9726 www.team-els.com

www.hydro-klean.com

SearchPath of Chicago 815-261-4403,x100 www.searchpathofchicago.com

Hydro-Blasting Hydro-Klean, Inc. 515-283-0500

www.hydro-klean.com

Railcars Hydro-Klean, Inc. 515-283-0500

Met-Chem ¿lter presses are ideal stock pre-¿lters. They have been sucessfully used in process ¿ltration of Magnesol™ and in various other applications for processing biodiesel.

Call: 216-881-7900 info@metchem.com Fax: 216-881-8950

Strategic Resources 425-688-1151 www.strategicresources.com

Engineering www.hydro-klean.com

Process Design

Tank Cleaning Services

Crown Iron Works Company 651-639-8900 www.crowniron.com

Hydro-Klean, Inc. 515-283-0500

PreProcess, Inc. 949-201-6041

www.hydro-klean.com

Pelcal, LLC 805-602-1088

Equipment & Services

Conferences/Trade Shows & Meetings

www.pelcal.com

www.preprocessinc.com

Air Pollution/Odor Control

Filtration Media Met-Chem, Inc. 216-881-7900

www.metchem.com

Algae Biomass Summit 763-458-0068 www.algaebiomasssummit.org

Anguil Environmental Systems, Inc. 414-365-6400 www.anguil.com

Flaking Equipment

Algal Biomass Organization 763-458-0068 www.algalbiomass.org

Analytical Instruments

French Oil Mill Machinery Company 937-773-3420 www.frenchoil.com/biodieselmag.shtml

Wilks Enterprise, Inc. 831-338-7459

48

BIODIESEL MAGAZINE

z

NOVEMBER 2011

www.WilksIR.com

BIODIESEL MARKETPLACE Grease Handling Equipment

Separators

Moeller Plastics 931-738-809

Hydrasep, Inc. 662-429-4088

www.moellerplastics.com

Laboratory-Equipment

Storage

Biodiesel Analytical Solutions 800-483-8107 www.biodieselanalytical.com

Guttman Group 800-245-5955

Insurance www.hydrasep.com

www.imacorp.com

Mergers & Acquisitions www.guttmangroup.com

Tanks French Oil Mill Machinery Company 937-773-3420 www.frenchoil.com/biodieselmag.shtml

IMA of Kansas, Inc. 316-266-6290

National Business Brokerage, Inc. 501-833-8511 www.natbusbro.com

Marketing

JVNW Inc. 503-263-2858

www.jvnw.com

Laboratory-Testing Services Used Equipment UPM Machine 713-440-8200

www.upmmachine.com

Biodiesel Gulf Hydrocarbon 800-834-0202

www.gulfhydrocarbon.com

Suma Energy LLC 516-816-3705

www.sumaenergy.com

Blender/Distributor

Water Treatment

SELL US YOUR USED OR IDLE EQUIPMENT

American Biofuel Solutions, LLC 305-246-3835 www.305biofuel.com

Market Data Research 13 503-863-9913

www.Research13.com

Miscellaneous

REVERSE OSMOSIS SYSTEMS RO MEMBRANE ELEMENTS ION EXCHANGE SYSTEMS ION EXCHANGE RESIN FILTRATION SYSTEMS WASTEWATER EQUIPMENT

Maas Companies 507-285-1444

www.maascompanies.com

Modular Systems

Call: 1.800.919.0888 or Email: jeff@watersurplus.com

GreeNebraska Renewable Diesel Refineries 402-640-8925 www.greenebraska.com

Turnkey Systems Agri-Process Innovations 870-673-3040 www.apinnovations.com Green Fuels America, Inc. 866-996-6130 www.greenfuelsamerica.com

Finance Accounting Cennatek Bioanalytical Services 519-479-0489 www.cennetek.ca Iowa Central Fuel Testing Lab 515-574-1253 www.iowafueltestinglab.com

Christianson & Associates 320-235-5937 www.christiansoncpa.com

Appraisals Sandalwood Valuation 303-955-8393 www.sandalwoodvaluation.com

Saskatchewan Research Council 306-787-9400 www.src.sk.ca

Due Diligence

Loading Equipment-Liquid

John Harday, Attorney At Law 501-833-8511 jhardy@lee-enterprises.com

PFT-Alexander, Inc. 1-800-696-1331

www.pft-alexander.com

Quality Assurance Test Prod Bullard Consulting 501-833-8511

Equity Procurement Cari Campbell & Associates 563-513-2723 www.caricampbellassociates.com

kent@lee-enterprises.com NOVEMBER 2011

z

BIODIESEL MAGAZINE

49

BIODIESEL MARKETPLACE JatroDiesel Inc. 937-847-8050

www.jatrodiesel.com

Advertiser Index 51 2012 International Biomass Conference & Trade Show

Mcgyan Biodiesel, LLC 763-421-3729

www.mcgyan.com

7 2012 National Biodiesel Conference Pacific Biodiesel Technologies 503-263-1851 www.biodiesel.com

Research & Development

52 2012 Pacific West Biomass Conference & Trade Show 9 Algal Biomass Organization

Engine Testing

51 BDI - BioEnergy International AG

Roush Industries 734-779-7736

www.roush.com

11 California Biodiesel Conference

Transportation

45 Cognis Corp/Qta Group

Railcar Gate Openers

34 Crown Iron Works Company

The Arnold Company 800-245-7505 www.arnoldcompany.com

39 FCStone, LLC 41 Jatrodiesel

Vehicles

26 KESZ Holding Ltd.

PICK-UP & DELIVERY.

40 Koehler Instrument Company, Inc. 33 Methes Energies 29 NBB National Biodiesel Board 27 Velcon Filters 35 Wilks Enterprise, Inc.

Grease Collection Service Aluminum Vacuum Tank Trucks Tank Sizes from 300 to 7000 Gallons

Slide-In Units Size & Pump Options In STOCK Selection

Ask about our dual tank & pumping systems.

• •

•

Industries Inc.

866-789-9440 www.keevac.com Denver, CO • Bellefonte, PA • Kansas City, MO

50

BIODIESEL MAGAZINE

z

NOVEMBER 2011

April 16-19, 2012

Colorado Convention Center Denver, Colorado

The Largest Biomass Industry Networking Event in the World!

Sponsorships and Exhibit Space

Now Available

The International Biomass Conference & Expo is anticipated be even larger than last year’s successful event. With an anticipated 1,500 attendees, 230 exhibitors, 120 speakers and 60 sponsors, you’ll experience firsthand why the majority of our past exhibitors and sponsors have walked away with valuable contacts and sales leads.

Register Today and Grow Your Future.

CONTACT US: 866-746-8385 service@bbiinternational.com Follow Us: twitter.com/biomassmagazine

A New Era in Energy: The Future is Growing Sponsors as of September 14, 2011