The Building Designer by Building Design Queensland

THE

DESIGNER No. 158, December 2009

r.r.p. $5.95

100 95 75

25 5

building designers association of queensland inc.

building designers association of the northern territory

Dec09_001 Wednesday, 20 January 2010 8:52:11 AM

Honour State President 1990 - 1991 1991 - 1992 1992 - 1994 1994 - 1996 1996 - 1997 1997 - 1999 1999 - 2001 2001 - 2003 2003 - 2006 2006 - 2008 2008 -

Board

building designers’ association of queensland inc.

Chris Raymond Jim O’Leary Adrian Pooley Keith Ratcliffe Russell Meikle Russell Brandon Phillip Buchanan Peter Nelson Jeff Osman Max Slade Greg Pershouse

Life Member 1992 1992 1994 2000 2000 2008 2008 2009

Jim O’Leary John Hooker Adrian Pooley Jeff Osman Russell Brandon Glen Place Bert Priest Phillip Buchanan

Fellow 2009 2009

Stephen Kidd Chris Vandyke

Honorary Member 1999 1999 2003

Margaret Hooker Meryl Pooley Barb Priest

100 95 75

25 5 0

Dec09_002 Wednesday, 20 January 2010 8:49:56 AM

1990 The world has changed a lot in twenty years!

Imagine a world without internet, email or mobile phones! Now imagine a few business people who happened to hear about pending state legislation that would utterly destroy their business and that of many other similar businesses. This is not fiction, this is the story of BDAQ. The story of how this news spread throughout Queensland in a flash, of how the fledgling group took on the might of a professional institute with a hundred years history to first delay and then utterly defeat the legislation, of how the few became hundreds and of how business competitors became business colleagues, is the story of the Building Designers Association of Queensland. It is truly a David and Goliath story that transformed the design industry forever. It is about the creation of a whole new profession, about the men and women who shaped the future and about when good building design was given back to the people. And it was all done without internet, email or a mobile phone! Building Designers from throughout Queensland and elsewhere in Australia are gathering in Brisbane for a gala anniversary dinner to celebrate 20 years of building design in Queensland.

You are invited to join in the celebration!

Saturday 6th March 2010, Sofitel Brisbane

100 95 75

25 5 0

Oct09-003 Tuesday, 3 November 2009 12:03:00 PM

Editor Russell Brandon Editorial Coordinator Kerrianne Sheppard Phone: 07 3889 9119 Advertising Enquiries Russell Brandon Phone: 07 3889 9119

EDITORIAL

COVER STORY Aurora

Feature Writer Jess Hanrahan Art & Design Jon Walsh

PO Box 651 STRATHPINE, QLD 4500 Phone: 07 3889 9119 Fax: 07 3205 1078 Email: admin@bdaq.com.au Web Site: www.bdaq.com.au

BDAQ EXECUTIVE President Greg Pershouse Phone: 07 4151 8350 Email: greg@designgp.com.au Vice President Colin Roe Phone: 07 3203 7045 Email: colinroe@bigpond.com

2010 NATIONAL CONFERENCE Conference details and highlights

Printer ABC Printing Publisher Building Designers’ Association of Queensland Inc.

HAPGOODGAMIN LAWYERS What building designers need to know about intellectual property

DESIGN FEATURE Grand transformation

DESIGN FEATURE Camp Mountain retreat

COMING UP AT BDAQ

DESIGN FEATURE Exotic tribal inspiration

PUZZLE PAGE - What’s missing - Last Word

Secretary Arthur Martin Phone: 07 4662 1403 Email: arthur@martindesign.com.au Treasurer Ian Darnell Phone: 07 4661 3714 Email: darnell@nspire.com.au Northern Vice President Brad Owens Phone: 07 4772 4205 Email: bowe6163@bigpond.net.au Central Vice President Glen Place Phone: 07 4942 1316 Email: glen@placedesigns.com.au

GRAND TRANSFORMATION page 13

Mid-coast Vice President Steve Claridge Phone: 07 5445 7434 Email: steve@claridge.net.au Southern Vice President Stuart Osman Phone: 07 5520 3022 Email: stuart@sobd.net Technical and Education Director Steve Gray Phone: 07 4124 0600 Email: hbdg@bigpond.net.au Executive Director Russell Brandon Phone: 07 3889 9119 Email: admin@bdaq.com.au

All information in this publication is provided in good faith but on the strict understanding that neither BDAQ nor the editor nor any other persons contributing to or involved in the

THE

DESIGNER No. 154, April 2009

r.r.p. $5.95

publication shall incur any liability whatsoever or howsoever arising (including but not limited to liability for negligent misstatement) in respect of such information and all liability arising either directly or indirectly as a

BDAA EXECUTIVE EXECUTIVE OFFICER Russell Brandon PRESIDENT Ray Brown QUEENSLAND DIRECTOR Max Slade QLD ADVISORY COMMITTEE MEMBER Colin Roe

100

consequence of the use or reliance upon any 95

advice, representations, statement, opinion or conclusion expressed in this publication is, to

building designers association of queensland inc.

building designers association of the northern territory

Cover: Aurora - Brad Read Design Group,p5

25 5 0

The Building Designer No.157 October 2009

Dec09_004 Thursday, 21 January 2010 8:26:35 AM

How important is that title anyway?

If “architecturally designed” homes

consultation on whether the use of

are in such demand that people will

“architectural derivatives” causes

flock to a builder providing

community “harm” with a view to

architectural services, surely this

mounting a public information

A Brisbane builder found itself in the

percentage would be growing in an

campaign and amendment to the

news late last year after proceedings

age where price is no longer the

Architects Act.

were brought in the Brisbane

only factor influencing selection.

Magistrates Court for offences

The report in the

under the Architects Act 2002.

In Queensland, the Architects Act was amended in 2002 to allow,

Architectural Technology, the journal

The Company pleaded guilty to

among other things, people

of The Chartered Institute of

November/December edition of

two offences. They admitted to

qualified as architectural technicians

Architectural Technologists, advises

claiming a person, who was not

to call themselves architectural

that there is widespread support in

registered by the board of

technicians. By then most of these

UK for the Architects' Registration

architects, to be an architect and

people were licensed building

Board as prosecutor for abuse of the

with promoting the design services

designers and mighty proud to call

title “architect” and for the extension

they provided as “architectural

themselves that.

of the role to cover the use of

services”. The builder was fined

misleading derivatives. The title

$2500, but was also ordered to pay

Of course there is nothing in the

“Chartered Architectural Technician”

$15000 in “investigative fees” to the

BSA Act to prevent anyone calling

is not being challenged.

Board of Architects.

themself a building designer so we are more likely to come across

Does anyone else think that it's a bit

I find it interesting that the Board of

architects calling themselves

strange that a society that can look

Architects could spend $15000

building designers. We wonder why!

at the title “doctor” and choose

investigating a simple case of a

between a GP, heart surgeon, dentist,

company without a registered

It is a fact that good design has

chiropractor, philosopher or even

architect claiming to offer

absolutely nothing to do with title.

Chris Reardon, a building designer

“architectural services” when that

Society now recognises that the

who has gained a doctorate in

company pleaded guilty. But that's

road to professional competency in

sustainable buildings, can't figure

another story.

any endeavour can take a whole

out the difference between an

range of pathways. The public is

architect and an architectural

What is more interesting is that a

well aware that excellence in

designer, technologist, etc?

house builder still believes that the

design is not limited to architects

term “architectural” has some

and nor is poor design restricted to

BDAQ has started a campaign of its

mystical attraction to potential

non-architects.

own based on the simple slogan:

Don't ask for architect designed, ask for WELL designed!

home buyers. Across Australia five to ten percent of homes are designed

At the same time in the United

by architects. The balance hasn't

Kingdom, the Association of

changed in twenty years.

Consultant Architects is undertaking

For professional building design and documentation look for one or more of these logos when you choose your building designer MEMBER

100

CHARTERED MEMBER

95 75

building designers’ association of queensland inc.

25 5 0

The Building Designer No.158 December 2009

Dec09_005 Tuesday, 19 January 2010 9:01:47 AM

Impressive enhancements, adding real value Sustainable timber windows and doors are not just an impressive enhancement. They are energy efﬁcient, built to last and look simply stunning. In addition to improving the energy rating of a building or renovation project you may also improve its resale value making it a wise choice as well as an aesthetic one. Whatever the opening, we can ﬁll it with any type and style of timber windows and doors you choose. Using the Duce Selection Process, possibilities are endless and tailor-made solutions are our forte here at Duce.

www.duce.com.au

T IMB ER WIND OWS & DOORS

AUSTRALIAN MADE AND MANUFACTURED

Head Ofﬁce 49 Brisbane Rd B RBundamba I S B A N 4304 E 07 3816 0244

Brisbane 2/17 Mayneview St I P S4064 W I C H Milton 07 3367 1733

Sunshine Coast Mid North Coast Gold Coast 11/64 Sugar Rd 2/22 Keona Cct 1/22 Hilldon Crt G O 4211 L D C O A Maroochydore S T S U N S HCoffs I N Harbour E C O 2450 A S T 4558 Nerang 07 5479 4411 02 6651 4311 07 5596 0466

51 Anderson St A I R N S Cairns C4870 07 4031 0111

NEW SELECTION CENTRE

DUCE__BD_june.indd 1

25/6/09 7:53:15 PM

COVER STORY

AURORA Brad Read Design Group

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_007 Monday, 4 January 2010 2:48:44 PM

COVER STORY

ITUATED IN HIGH PROFILE MAROOCHYDORE IS â&#x20AC;&#x153;AURORA,â&#x20AC;? A STUNNING MASTERPIECE FROM BRAD READ DESIGN GROUP, EPITOMISING MODERN DESIGN, LUXURY AND STYLE WITHIN A MULTI-RESIDENTIAL SETTING. Involving the design of two structures, the project was for a ten and a four storey building with the inclusion of high end residential units and ground level retail outlets with flexibility of use. The site allows excellent views over the Maroochy River and towards Cotton Tree, the river mouth and Pincushion. The site also offers limited vehicular access opportunities but links well with the surrounding pedestrian network. The resultant development of two buildings includes a total of 27 units, basement car park, common area, and commercial space involving two restaurants. To provide an element of separation and privacy, the southern elevation of the building was designed with a privacy facade screen, also adding to the aesthetic appeal of the design. The two ground floor restaurants occupy approximately 500m2 of commercially approved space and were each designed for separate clientele, combining well to enhance the reputation of the overall development. Maintaining a market-acceptable size, each residential floor of the ten storey building consists of two 3 bedroom units and a 2 bedroom unit, with the top two levels featuring sky homes and a penthouse. The penthouse also features a private dedicated roof terrace. The four storey building features one unit per level with a finishing touch of pure luxury. Each unit is afforded direct access via a private lift, as well as extensive private balconies overlooking the Maroochy River. A signature edifice of the surrounding area, the structure adopts a timeless design, utilising simple lines, regular glazing, feature cladding and neutral colours that combine to create a modern contemporary building.

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_008 Wednesday, 20 January 2010 12:17:09 PM

COVER STORY

Brad Read Brad Read Design Group 07 5444 1733 brad@brdg.com.au

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_009 Monday, 4 January 2010 2:55:28 PM

INTELLECTUAL PROPERTY

What building designers need to know about intellectual property By Marcelo de Farias, HopgoodGanim Lawyers It's important that building designers are aware of the intellectual property issues involved when creating building designs. A thorough understanding of the way intellectual property works in the building and construction industry can help you prevent infringement claims, consolidate your rights and ensure you receive the financial benefits you are entitled to out of the creative process. While intellectual property is a very complicated area of the law, there are a few basics that will be relevant to most building design projects. Copyright A building design will be protected by copyright the moment it is expressed in a material medium, such as a 2D or CAD drawing. This is because copyright provides protection for the expression of ideas, rather than the idea itself. An idea is not protected by copyright while it is still intangible - to be protected, it must be expressed in a material form such as on paper or in a computer file. By law, drawings, buildings or models of a building are considered to be an “artistic work” and copyright will exist in the work if it is original. The work is required to have “originality of expression” rather than “originality of the idea”, so that using a new form to express a known concept may still be entitled to copyright protection. Copyright will also exist in the building itself once it is built. It's also important to note that sufficient skill or labour must have been used to create the work for copyright to exist. Copyright grants the owner exclusive rights to: ·reproduce the work in a material form; ·publish the work; and ·communicate the work to the public. This means that the work cannot be reproduced or exposed to the public without the copyright owner's authorisation, usually given through a licence or an assignment of the copyright. Copyright usually lasts for the life of the author plus 70 years, and this term cannot be extended by contract.

the work would usually want to have ownership of the copyright transferred through a formal agreement, or otherwise have licence to use the work so that they may execute the rights of the copyright owner in that work. Infringement Copyright is infringed when someone uses a work protected by copyright without the authorisation of the copyright owner. This includes reproducing twodimensional works to three-dimensional works (for example, where a building is based on someone else's drawings) and vice-versa (for example, where drawings are based on an existing building). To establish infringement, there must have been reproduction, publication or communication of a substantial part of the work. Unfortunately this is a qualitative test rather than a quantitative one, and can be subjective and difficult to judge. The issue of copyright infringement is important when using building design software, such as ArchiCad, AutoCad or Revit, to produce drawings for building projects. Software is considered a literary work under legislation and is also subject to copyright protection. Building designers should ensure that the software they use to produce work is legitimate and properly licensed. Copyright may also exist in the documentation prepared to obtain building approval, if it contains a specific format not used by anyone else. Design The Designs Act 2003 defines a “design” as the “overall appearance resulting from one or more visual features of the product”. Accordingly, the scope of design protection does not include the function of the product, just the aesthetic appearance. These visual features can be two-dimensional or threedimensional. Unlike copyright, monopoly rights over a design can only be obtained if the design is registered in accordance with design law. Once registered, the protection lasts for a period of up to 10 years. The owner of the registered design has the exclusive right to produce a product that embodies the design.

Ownership Generally speaking, if an employee creates a building design as part of his or her employment duties, the copyright in the work will be owned by the employer (unless agreed otherwise between the employer and the employee), but the employee, as the author of the work, will still hold the “moral rights” to his or her work.

Importantly, even if another design that is identical or very similar to the registered design has been independently created, the owner of the registered design still has the right to restrain the independent creator from reproducing the design, so it is important to make sure you register original designs.

If the work has been commissioned by a third party (where a builder or client hired the building designer to develop the design), the party who commissioned

In order to be registrable, the design must be novel and distinct in relation to “prior art” - essentially whatever is already in the public domain.

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_010 Monday, 18 January 2010 12:03:14 PM

INTELLECTUAL PROPERTY

The types of items which would typically be registered by building designers, assuming they pass the novelty and distinctiveness tests, include unique styles of furnishings, fittings and decorative items.

Registration of a trade mark is the only way to obtain proprietary rights over a name or logo. Protection is limited to the class of goods and/or services claimed in the application. There are currently 45 different classes of goods and services in which trade mark protection can be claimed.

Patents Products or processes which are a “manner of manufacture” (that is, are capable of industrial application) and which are novel and contain an inventive step can be protected by patent. For a standard patent, the protection period is 20 years from the date the patent application is filed.

Registration is subject to an examination process conducted by IP Australia. The initial term of protection is 10 years, which can be indefinitely renewed for additional 10 year periods, provided that the corresponding renewal fees are paid.

While it is often difficult to satisfy the novelty and inventiveness tests, which are necessary to grant a standard patent, Australian patent law provides an alternative patent protection, the “innovative patent”, which requires a lower threshold but provides a shorter term of protection of eight years.

Intellectual property law can be a complicated area, but it's an important one for building designers to understand. For more information about protecting your intellectual property, please contact HopgoodGanim's Intellectual Property and Technology team.

The innovative patent does not require an inventive test but the lower threshold of an innovative test, which considers whether the concept provided a “substantial contribution” to an existing technology. Relevantly, Australian courts have recognised that the use of new materials in known products can be considered an innovative step if the material substantially contributes to the better performance of the existing product. Building designers are often involved in the selection of materials to be used in building projects. As a result, if a certain material is innovative in the sense that it considerably improves the performance of a product normally used in the market, it may be possible to acquire innovative patent rights for the new material.

Since 1974, HopgoodGanim Lawyers has provided sophisticated, inventive and value-based legal advice to clients in the corporate and commercial sectors. The firm was recognised by Australasian Legal Business magazine in both 2008 and 2009 as a leading firm in building and construction law. Based in Brisbane, HopgoodGanim has 25 partners and 190 experienced staff.

It is important to note that innovative patents have some important limitations in relation to enforcement rights, which should be considered carefully before deciding to go down this path. Trade marks Appropriate trade mark protection should be arranged for names and/or logos when a technology, product or service is provided to clients under a name or logo which is readily identifiable as a “badge of origin” of the business.

The contents of this paper are not intended to be a complete statement of the law on any subject and should not be used as a substitute for legal advice in specific fact situations. HopgoodGanim cannot accept any liability or responsibility for loss occurring as a result of anyone acting or refraining from acting in reliance on any material contained in this paper.

100 95 75

Helping build your future 25

77 Barolin Street, Bundaberg Ph (07) 4150 1500 Fax (07) 4151 5650 PO Box 1115 Bundaberg, QLD, AUST 4670

Dec09_011 Friday, 22 January 2010 11:57:27 AM

5 0

2010 BUILDING DESIGNERS NATIONAL CONFERENCE 6th to 9th MAY 2010 TWIN WATERS RESORT SUNSHINE COAST

CONFERENCE GOLD PARTNER

Program Overview CONFERENCE SILVER PARTNERS TASMANIAN TIMBER ENGINEERING

CONFERENCE PARTNERS

THURSDAY 6

MAY

2010 BDA GOLF DAY OR VISIT TO Australia Zoo AND LATER ENJOY

WELCOME COCKTAILS at TWIN WATERS TH

FRIDAY 7

CONFERENCE SPEAKERS Dick Clarke (Envirotecture) Lessons from a Black Day Sidonie Carpenter (Green Roofs Australia) A Different Approach from the Top Down Darryl O’Brien (Certcon Building Certification)\ Sustainable for the Long Term Jim Burgess (Timber Queensland) Chain of Custody - Making a Lifetime of Difference Neon Abbato (Griffith University) Post Occupation Feedback Cyclone Testing Station (James Cook University) Destructive Wind - It’s more than just Cyclones AND MORE!

and INTRODUCING THE DESIGN CHALLENGE PANEL Two teams of award winning designers will provide comment on each conference presentation and also test their design skills in a “young guns” versus “a wealth of experience” design challenge. Can the enthusiasm of the tyros take the mantle from the established masters? You be the judge!

MAY

CONFERENCE DAY 1 AND PARTNER PROGRAM AND in the evening join us for a BEACHSIDE BARBEQUE DINNER TH

SATURDAY 8

MAY

CONFERENCE DAY 2 AND PARTNER PROGRAM AND AT NIGHT NATIONAL BUILDING DESIGN AWARDS PRESENTATION DINNER

SUNDAY 9TH MAY CONFERENCE FAREWELL BREAKFAST

AND then on to a HINTERLAND WINERY TOUR Registration starts at just $750 including resort accommodation and breakfast.

REGISTRATION PACKAGE AVAILABLE CONTACT the conference managers KDS Professional Solutions c/- BDAQ Office Phone: 07 38899119 Email: admin@bdaq.com.au and watch for updates at www.bdaa.com.au building designers a s s o c i a t i o n of australia ltd

100 95 75

25 5 0

Dec09_013_proof Monday, 18 January 2010 12:51:57 PM

DESIGN FEATURE

GRAND TRANSFORMATION Collingwood Street, Paddington

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_015 Monday, 11 January 2010 3:52:11 PM

DESIGN FEATURE

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_016 Monday, 11 January 2010 3:56:40 PM

DESIGN FEATURE

LOCATED IN THE HEART OF PADDINGTON IS THIS STUNNING DESIGN FROM JAYE IRVING OF BAREFOOT SUSTAINABLE DESIGNS. Protected by a demolition control zone as a character house, the 1920's Queenslander was in dire need of a revamp. Now sitting atop a hill overlooking the Brisbane city centre it has an air of charm and sophistication. The renovation called for the replacement of the existing kitchen and repairs for the bathroom areas, as well as the addition of four new bedrooms and a rumpus room on the ground level creating a private sanctuary for the first floor. The longitudinal axis is orientated north, allowing for large passive access of winter sunlight while the elevated position and extensive use of high and ground level louvers captures summer breezes, keeping the home comfortable all year round. The open plan living areas are designed to connect with the outdoor areas with improved efficiency through sustainable approaches to water and power usage, while improved design enhances air quality and passive flow through ventilation, as well as maximising natural lighting. Water and energy saving technology such as solar hot water, water tank, flow restrictors and energy efficient lighting are used within the completed project and the addition of a two car garage that blends in with the scale of the street gives the home a more modern approach without compromising the aesthetics of the building. Sweeping floor to ceiling doors and windows create a strong connection with the green outcropping nature strips and surrounding vegetation and the restoration of the external facades rather than replacement maintains the 1920's character of the home, keeping with the integrity of the surrounding cultural and architectural landscape.

100 95 75

Jaye Irving Barefoot Sustainable Design 07 3844 2091 jaye@barefootdesign.com.au

25 5 0

The Building Designer No.158 December 2009

Dec09_017 Wednesday, 20 January 2010 12:28:04 PM

MEDIA RELEASE

Queensland leads the way with high-rise glass safety tests New high-rise glass window panes will be safer when a national test championed by Queensland takes effect on May 1. Minister for Infrastructure and Planning Stirling Hinchliffe said the State Government had successfully campaigned for a national safety upgrade of new window panes for high-rise buildings. Mr Hinchliffe said in recent years glass had spontaneously failed and fallen from high-rise buildings in Brisbane's central business district. He said the new heat soaking tests were designed to detect any flaws before the glass was installed. “This is an issue that has plagued cities around the world,” Mr Hinchliffe said. “This problem led us to seek action on the issue which we then brought to the attention of other states and territories. “Late last year the Australian Building Codes Board agreed to implement a national test for impurities in new toughened glass panes by heat soaking them. “This latest achievement will help stop impure panes of new toughened glass being fitted in tall buildings where sufficient protection from falling glass, such as balconies or awnings, is not provided. “It involves any domestically produced or imported glass being heat soaked to identify the nickel sulphide impurities that can lead to failures.

Air-cell Innovations joins Kingspan Australian insulation company Air-Cell Innovations Pty Ltd has been acquired by the global building products manufacturer Kingspan Group, the world’s largest manufacturer of premium and high performance rigid insulation materials. Air-Cell Innovations produces a comprehensive range of thermo-reflective insulation products, and is well established in the Australian market. Kingspan Group is recognised as one of Europe’s leading and fastest growing insulation manufacturing companies, known for its Kooltherm, Therma and KoolDuct product ranges. The merging of the two companies in this new venture will allow an exceptional range of products and expertise to be offered to the Australian market, which already enjoys a high level of quality and technical support from Air-Cell. Air-Cell Managing Director, Scott Gibson, said of the move “This step allows us to move forward as the demands and complexities of the industry grow, providing the materials and the knowhow to meet those needs, and bringing the benefits of insulation to an even greater audience.”

“From 1 May, a new test for new high-rise glass window panes will be phased in over a 12-month period to allow industry to adjust.''

Mr. Gibson said that corporate values also made the new venture a perfect fit.

Mr Hinchliffe said from May 1 the Australian Building Code would be amended to include the new test provisions. The test, for glass in all windows more than 5m above floor or ground level, will become mandatory in May 2011.

“Air-Cell has always held strong environmental values, and Kingspan’s ‘low carbon, low energy’ values give me great confidence that we are heading in the same direction, the right direction for a sustainable future,” he said.

“In simple terms it involves heat soaking the glass for two hours at 280 degrees Celsius to see whether it will break,” Mr Hinchliffe said. “Glass for windows in high-rises must already be manufactured to an Australian Standard but from May 1 toughened glass will also be heat soaked to further protect the public.” Mr Hinchliffe said it was important to note the test would not fix glass failure problems for existing buildings. “It's not realistic to expect that all glass in older buildings could be replaced due to the massive costs involved in such an exercise,” Mr Hinchliffe said. “However, those responsible for existing buildings should regularly inspect existing glass and where failures have occurred or are likely to occur, suitable protection measures should be provided.”

His sentiments were echoed by Peter Wilson, Managing Director of Kingspan Insulation, who added “We are delighted to be merging these two respected brands together. We are looking forward to offering the Australian market some of the best insulation products available in the global construction industry, providing cutting edge technology aimed at reducing our carbon footprints.”

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_018 Thursday, 21 January 2010 1:04:29 AM

100 95 75

25 5 0

Dec09_019 Monday, 18 January 2010 1:13:58 PM

COLORBOND®, Thermatech® and BlueScope are registered trade marks of BlueScope Steel Limited ABN 16 000 011 058. * Depending on level of insulation, building shape and function. Average reduction is 5%. BQN32596B2

Why is COLORBOND® steel with Thermatech® solar reﬂectance technology so important? Roofing is a key consideration when designing any building to be thermally efficient. That’s why Thermatech® solar reflectance technology is included in the specification of all 20 colours in the standard COLORBOND® steel range, at no extra cost. In hot weather, COLORBOND® steel with Thermatech® can help

BLUPK32596b_BER_C&I_BDA_QLD/NT.indd 1

reduce peak roof temperatures by up to 11°C and provide the equivalent to an increase in insulation of up to R1.0. Compared to roofing materials of equivalent colour with lower solar reflectance, COLORBOND® steel can reduce annual heating and cooling energy consumption by up to 20%*. For specification tools, thermal properties, online warranty and more visit bluescopesteel.com.au/projects or call 1800 022 999.

CLIMATE CONTROL STARTS HERE

ONLINE TOOLS: bluescopesteel.com.au/projects TECHNICAL SUPPORT: 1800 022 999

3/11/09 3:59:29 PM

DESIGN FEATURE

CAMP MOUNTAIN RETREAT

100 95

A family home from East Coast Building Design

25 5 0

The Building Designer No.158 December 2009

Dec09_021 Friday, 15 January 2010 1:10:56 PM

DESIGN FEATURE

A FAMILY HOME WITH A POINT OF DIFFERENCE, CAMP MOUNTAIN RETREAT BY OWEN BATCHELOR OF EAST COAST BUILDING DESIGN PRESENTS AS AN ICON OF LUXURY IN A BREATHTAKING SETTING. Utilising a pavilion style design, the home includes distinctly separate zones for family, living and sleeping quarters while remaining cohesive and functional. Due to the steepness of the site, the home incorporates a stepping design which also enhances light and ventilation within the residence. The design focuses around an elevated central lounge, dining and kitchen area. This area provides access to the outdoors from all directions, while maintaining focus on the sweeping mountain views. Secondary living spaces open on to decks and down to the yard, creating a good interaction between indoor and outdoor areas.

Bedrooms are all co-located on the top floor, but separated by glass atrium stairs. These staircases also connect the pavilions, ensuring maximum light and airflow. In hot weather, the atriums act as passive heat ducts, drawing the heat up out of living rooms. Extensive use of feature timbers and second quality flooring gives the home life, allowing it to blend with the rural setting and majestic views, while widespread use of louvers allows control of privacy and noise between the various living areas.

The pavilion style allows every major room in the house to absorb the majestic mountain views, while interacting perfectly with each other. Externally, blue and cream main wall panels are offset by zincalume panels to create a warm mosaic of colours with Bluescope Colorbond roofing across the whole project. The resultant home is aesthetically pleasing and functional, constructed predominantly of sustainable and re-useable materials ensuring a low maintenance and luxurious environment for the entire family.

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_022 Wednesday, 20 January 2010 12:36:00 PM

DESIGN FEATURE

100 95

Owen Batchelor East Coast Building Design 07 3260 7880 owen@eastcoastbuildingdesign.com.au

25 5 0

The Building Designer No.158 December 2009

Dec09_023 Friday, 15 January 2010 1:14:40 PM

COMING UP AT BDAQ BDAA Training in Building Sustainability TOWNSVILLE Rydges Southbank, 23 Palmer Street MACKAY Ocean International, 1 Bridge Street GYMPIE Gympie Conference Centre, 28 Fraser Rd.

March 19, 20, 26, 27 May 21, 22, 28, 29 June 18, 19, 25, 26

This is your opportunity to be recognised as an EcoDesign Smart Building Designer. The Building Sustainability Seminar course is the training qualification for the BDAA EcoDesign Smart program. THE PROGRAM THE COST Day 1 Day 2 Day 3 Day 4

Thermal Performance Water Management Energy Services Waste and Materials

BDAQ Members Non-members Students

$440.00 includes all four days $550.00 includes all four days $440.00 includes all four days

Construction Training Queensland subsidy is available to a limited number of participants be first to register to take advantage of subsidy.

Registration forms included in this issue of The Building Designer

AND ANNOUNCING

BDAQ’S NEW CAN’T MISS WEB EVENT THE

FIRST THURSDAY

MASTERCLASS (it’s on the first Thursday every month)

BDAQ is proud to present a new concept in professional development. You don’t even have to leave your seat, we will come to you over the ethernet.

OUR PROGRAM Thursday February 4

12.00 noon EST

Presenter: Glen Place

“Introduction to the BDAQ Fee Calculator” and “Introduction to the BCA Compliance Check Sheets”

Thursday March 4

12.00 noon EST

Presenter: Russell Brandon

“Risk Management Seminar - Using the Manual”

Duration: up to 90 minutes

BDAQ CPD Points: 2 per session

Cost: As an introductory offer the first two are FREE

What you need: 1 telephone (a speaker phone or headset may be useful) and 1 computer connected to the internet. How to join:

1. Call toll free 1800 896323 your Participant Pass Code is 54123334 2. Log on to www.redbackconferencing.com.au 3. Click on the orange box “Join a web conference” your Participant Pass Code is still 54123334 4. You are now part of the exciting event.

Do you have a great eco-friendly project underway? If so, we want to hear about it! Nominations are now open for the 2010 Premier’s Climate Smart Sustainability Awards to showcase the work of Queensland business, industry, schools and community organisations. Building on the success of the Sustainable Industries Awards, these prestigious awards will recognise Queensland-based initiatives that help reduce our carbon footprint and set best-practice benchmarks in environmental performance. Applications are open to businesses, schools, individuals, communities, households, not-for-profit organisations and local governments.

Nominations close on Friday 26 March 2010 The winners will be announced at a gala dinner, hosted by Premier Anna Bligh at the Brisbane Convention and Exhibition Centre on Friday 4 June 2010.

100 95

The awards are a fantastic way to highlight your commitment to sustainable practices and raise the profile of your initiative. Each category will also receive $5000 to support on-going or future sustainability projects. For more information and an online application form visit: www.derm.qld.gov.au/premiersawards or phone (07) 3225 1764.

25 5 0

The Building Designer No.158 December 2009

Dec09_024 Friday, 22 January 2010 12:02:14 PM

100 95 75

25 5 0

Dec09_025 - proof Monday, 18 January 2010 1:25:54 PM

The DURAGAL FLOORING SYSTEM® easily overcomes sloping or uneven sites, freeing you to design to your vision. Our complete system of steel subflooring fits to the contours of your site and can be adjusted at any stage of construction. The advantages of designing with the DURAGAL FLOORING SYSTEM® don’t end there. It’s assembled without welding on-site, saving time and money. It’s corrosion resistant, won’t rot, shrink, warp, bow or twist and termites won’t eat it. Plus the strength of steel gives you the freedom of long spans with the added safety of fire resistance.

H&T MET0100

Explore the advantages of designing with the DURAGAL FLOORING SYSTEM® now at www.onesteel.com. Or talk to us about how we can help you make the most of your site on 1300 862 400. Email us your plan at dfs@onesteel.com to receive your free design layout and quote today.

DESIGN FEATURE

100

EXOTIC, TRIBAL INSPIRATION

95 75

The Kirra by Adenbrook Design

25 5 0

The Building Designer No.158 December 2009

Dec09_027 Friday, 8 January 2010 1:26:38 PM

DESIGN FEATURE

FLOOR PLAN

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_028 Friday, 8 January 2010 1:33:12 PM

DESIGN FEATURE

“ The Kirra,” designed by Robert Lyndon of Adenbrook Homes is a contemporary and luxurious tribal retreat within an urban setting.

Complementing the modern L shaped home, the interior design is nothing short of spectacular. Inspired by exotic tribal tastes, primitive artefacts, wrought iron relics and leather bound books the design express strength, passion and confidence. Whilst the brightness and vibrancy of colours such as olive green, rusty red & tangerine delight the senses, they still retain a calming and earthy ambience when combined with solid aged dark timbers and vintage leathers. The kitchen is the hub of the home and was designed using an earthy colour stone, dark bronze cupboards and a splash of Laminex colour as the feature. A butler's pantry was created in lieu of a standard pantry to allow space for preparing and concealing whilst entertaining. Bathrooms use matching natural looking floor and wall tiles, with feature tiles of natural random

slate with copper inserts. Beige walls, earthy tiles, natural wallpaper and rustic furniture dominate the interior with touches of colour throughout. A multipurpose room toward the front of the home houses the media centre, with ceiling to floor curtaining around the entire room to help with acoustics. The colours and fabrics used within create a warm and cozy feel. The home really encompasses the “wow factor” from the moment you step through the front door, with a contemporary and industrial feel while being balanced with comfortable luxuries creating a warm and inviting ambience.

Robert Lyndon Adenbrook Homes 07 3909 4444 nathan.senti@mediasix.com.au

100 95 75

25 5 0

The Building Designer No.158 December 2009

Dec09_029 Wednesday, 20 January 2010 12:53:28 PM

PUZZLE

OUTSIDE THE