You're Losing Money by Not Using Beer Fobs The biggest loss in the business or money is when your beer is going waste. Every beer bar owner wants to save beer owners want to grow their business and make a profit. For a good business, customer satisfaction is a must. If the customer is satisfied with your beer bar service, they would love to come again. Also, they will refer you to their friend or business circle. What is Beer Fob Beer Fob is a company that designs, installs and services ​beer fob system throughout Canada. The people working at Beer Fob are experts on beer fob systems and even serve outside Canada. A beer Fob is a device that detects and separates foam from beer. It is connected directly to the keg. If you use a beer fob, it automatically shuts down the beer supply when it detects the empty keg.
Beer F​ob System Operation Be sure to refrigerate the barrels for 24 hours before dispensing to prevent foaming. It takes a long time to cool a barrel of beer. The barrels must always remain cold. Refrigerate the barrels immediately after they’re
delivered. Do not try to adjust the gas pressure. Only beer FOB system technicians should adjust the gas pressure to the barrels. How It Works Once your beer keg runs empty, your usually left with messy beer froth and foam. When you have a FOB installed and your keg is full or when the beer is flowing, a float inside the FOB remains at the top. When a keg goes empty the float instantly drops to the bottom like a suction. This suction acts like a plug in a sink, creating a seal that prevents any air or gas from entering the beer lines. How To Install When hooking up a new keg, ensure to open up the bleed valve to drain out any excess foam into a bucket or drainage pipe. Once the FOB is full and filled up with beer you’re all set to pick up where you left off. No wasted beer or no wasted mess, just don’t forget to close the bleed valve Visit:
Our website: https://www.beerfob.com/