STEP 6
Assemble SLASH FOIL SET to board
We recommend setting your mast in the center of the foil tracks to get started. • Moving your mast foward will provide more lift. • Moving your mast back will provide less lift. • Movements should be done in increments to find the spot of controlled lift. SCREW
M8x30 C
M8 NUT E
QTY
4
4
C
C C
E
C E
E E
AFTER USE CARE • After each use disassemble your foil completely to prevent oxidation of the screws and threads and wash each component in freshwater. • Protect front wing & stabilizer with dedicated covers when not in use. • If you are not using your foil for a prolonged time, we recommend you fully disassemble the foil system, rinse with fresh water and dry it.
