SPANK CATÁLOGO 2012 by Bicistore.net

W W W .S PA NK -B IK ES .C O M

The Spank Story Racing is Life... and we were all born to win. The simple fact that you exist means that you have already won the first and most important race of all. Why Spank? Your first adrenaline rush was just moments from birth, when that all important spank on the buttocks kick started your vitals and made you an adrenaline junky for life! Spank Industries aims to free your mind and trigger that rush every time you ride your bike.

WWW.SPANK-BIKES.COM

HANDLEBARS - TECH OVERVIEW XGT bars are designed to offer the most comfortable ride possible with alloy, without excessive flex. They have a consistent gradual taper from the center clamping zone to the barends, improving dissipation of energy within the inner core. XGT bars are available in 5/20/40mm rises.

Additional processes are added to improve on the uniform cylindrical nature of the clamp zone (improving bar fatigue life), and work harden this critical area. SPANK Handlebars are constructed of MGR alloys, meaning whether you have a Zirconium Doped Alloy, Super-6 Alloy, or 6-Series Alloy bar, it received special multi-step drawing processes to reduce grain size and improve on grain orientation. Dual XGT’s butting to the extreme degree! Dual bars are tapered from center to bends, then thicken through the bends, taper again to the control mount area, and finally thicken again at the “Impact Ends”. DUAL XGT bars are available in 5/15/30/50mm rises. SPANK’s “Impact Ends” are reinforced to protect against damage from crashes or lock-on barends and grips

CNC Bending is unique to SPANK Handlebars, and means both improved consistency and the elimination of heavy grinding steps that create thin spots in crucial zones

Cutting lines allow users to customize length by up to 40mm

WWW.SPANK-BIKES.COM

HANDLEBARS OohBah RIM --TECH TECHOVERVIEW OVERVIEW

SPOKE BEDS: Spank’s patented OohBah™ Profiles include our “360º Orbital Nipple Seats” which when combined with our advanced alloys result in much higher pull through strengths than competitors with soft malleable eyelets.

SPANK hoops are constructed of MGR processed alloys, further strengthening the Dynamal or Super-6 alloys by reducing grain size and improving on grain orientation. All 2011 EVO Rim profiles have been updated to further reduce weights & flange heights improving resistance to dents & dings.

JOINTS: Spank employs welded, sleeved and pinned joint technologies depending on intended discipline. Welded-ultimate light weight Sleeved-ultimate strength to weight ratio Pinned-economic bombproof alternative The “wave” shape of the inner tube well wall acts like corrugated steel roofing to strengthen the profile and support the vertical rim flanges.

Patented

SPANK’s patented Double Beadnip system ensures the tire bead cannot slip upward or inward. This means the rider can run lower air pressures with drastically reduced fear of pinch flats.

Oohbah convex tube wells, when combined with concave outer walls create a new “hoop strength” in the sectional profile, and allow the rim to approach a toroidal shape, lending massive rigidity to the rim in all directions.

WWW.SPANK-BIKES.COM

HANDLEBARS STEMS – TECH - TECH OVERVIEW OVERVIEW MATERIAL: ZIRCONIUM DOPED ALLOY (special SPANK 7-series recipe) OR 6-Series alloy Negative Rise-Dropped Barclamp improves rider positioning & weight distribution, enhancing handling and traction.

35mm 50mm

Chamfered barclamps increase handlebar fatigue life

50mm

High polished 7-series faceplates with deep cut CNC logos

50/60/70/80mm

50mm

CNC optimized inside and out for ultimate lightness while retaining superior stiffness and strength

Custom Stainless, Titanium, CR-MO, or plated hardware OOZY LTD STEM OOZY STEM Weight: from 125g Weight: from 160g All Mountain Strength / XC Race weight

Custom SPANK “Snap-Fit” sealed topcap for a convenient and beautiful assembly

18Nm High Torque Sex Bolts equipped with torque washers in Titanium or Stainless Steel, now keyed for single tool assembly.

WWW.SPANK-BIKES.COM

TUGGJOB HANDLEBARS GRIPS- -TECH TECHOVERVIEW OVERVIEW Custom Kryton

Extra long 145mm body is perfect for DJ, MTN, or Fixie applications

Ultra Thin

Expander End Caps

50mm Flanges for use with or without shifters

Debossed logos mean greater surface contact area and improved grip, durability, and comfort

Flexible and durable expander caps integrate into body of grips

Custom Kryton Rubber compound offers improved tactile responsiveness, long lasting wear, and tacky feel Stainless hardware

Tie down grooves fore and aft

Ultra-thin construction suits current trend in DJ, MTN, and Fixie Attractive an Convenient, the point of purchase packaging can be displayed on any countertop to grab attention (and make the shop smell great), or hung on standard hooks or pegs

Scented Fruity Flavors

6 Colors and 5 Amazing Scents! Grape Purple Apple Red Berry Blue Zesty Orange Vanilla White Magic (No Scent) Black

WWW.SPANK-BIKES.COM

TWEETHANDLEBARS TWEET FRAME /-PARTS TECH -OVERVIEW PIMPYOUR RIDE Frames at only 2.48 kg, and complete build (shown here) at only 12.9 kg! Recommended for 80/100/120 mm forks, tested with all major brands New Brushed-Deep Ano finish on all Tweet rims and components means improved durability w/o compromising aesthetics. Frames available in 5 ECO Coat Colors *Magic Black *Aqua Blue *Apple Red *Chrome Silver *Eggplant Purple

Tweet Stems stand alone at only 160g~bomb proof, beautiful, brilliant! 24.5mm clamp and 50mm ext makes then the perfect spec for DJ/FR and Fixie!

New Tweet saddles now available in red, blue, black, white, Kevlar reinforced, with non-slip embossed cover.

Tweet 720 bars come in 6 eye candy colors & 30 / 50 / 70mm rises. Tight bends mean perfect for Fixie application too!

Color coded seatclamps add a final touch of class and color CNC SPANK-Star bridges and gussets at chainstays, seatstays, and throat area Brushed-Deep Ano, single speed sprockets (25T/28T/30T/32T) and Tweet color coded Â˝ link chains bring bling to the drive-train of any ride!

WWW.SPANK-BIKES.COM

SPOON SERIES - ECONOMIC BOMBPROOF DESIGN

SPOON STEM • “True Zero Rise” improves rider positioning and weight distribution. • 40mm super short length • Oversize custom, plated chromo chromo hardware • ”Snap-fit” sealed top-cap incl.

SPOON 740 BARS • New 740mm length for enhanced control & stability. • Now available in 40mm, 20mm, and new 5mm rises • 5° up/8.5° back “rider tuned” geometry • New Satin Peened finish with laser logos for ultimate durability.

SPOON 32 RIM • 32mm outer width offers the perfect blend of confidence inspiring traction, stiffness, and versatility. • Pinned joints allow an economic price point with out compromising strength.

SPOON one2one FRAME • Spank took our legendary Tweet frame and trimmed it down to offer core riders & entry level customers alike the perfect dirt / vert / street option. • Forged Spank star dropouts for ultimate strength to weight • Black on Black or Toxic Wasabi Green • Updated geometry - Improved clearance. • 2.48Kg

WWW.SPANK-BIKES.COM

SPIKE PEDAL - TECH OVERVIEW

Finally an Ultra-Thin, Super-Light, BIG & Bombproof Flat Pedal from “The Upgrade Specialists”, SPANK Industries! The Spike Pedal offers all the performance you ever wanted and more from a Flat…with the great looks you’ve come to expect from SPANK!

• Only 400g per pair means competitive from Trail/All Mountain to DH/FR and DJ • Thickness only 12mm (w/o pins) is amongst the thinnest in the business . Reduced thickness is of course important for ground clearance in rough terrain, but also improves on pedaling efficiency and reduces painful “pedal-flip”, by almost eliminating the triangulation between the rider’s foot and pedal axle. • Forged one piece body for the ultimate achievable strength to weight ratio! Traditionally pedal makers extrude the pedal body to save on tooling and production costs, but must add buffer material to compensate compromised strength. SPANK went the extra mile to ensure we created the thinnest AND strongest pedal money can buy. • 20 adjustable position pins per pedal provide unbelievable grip. Pin configuration can be selected by the end consumer to enhance maximum grip or improve on ability to adjust foot positioning. • Massive 90cm2 platform makes traditional flats look tiny and means improved grip and stability as well as reduced impact pressure and fatigue to the rider’s foot. • Chamfered Point of Impact Surfaces reduce impact forces and improve on ability to skip over obstacles. • Chamfered leading corners improve pedal clearance when cornering by mirroring the angle of approach with the ground. • Full compliment oversize industrial sealed bearings and IGUS bushings are paired to offer both smooth function and durability. • Dust Cap encompassed Quad Ring Seals provide protection from contamination and allow the rider to easily tune the level of desired “free-spin”. • “Hollow Taper” scandium enriched steel spindle system with a special plated finish gives unparalleled stiffness and durability. • Ramped inboard bearing zone helps to guide foot into correct position every time. • “True Flat” design with virtual concavity from pin configuration allows for improved foot positioning on the fly without compromise to grip. • MSRP – starting at only 109€ / 125$ puts the Spike Flat in a market of its own.

WWW.SPANK-BIKES.COM

SpIkE RAcE28 EVO RIM

• • • • • • • • • • •

26” and 29” Diameters / 32H 28mm Outer Width ~ 23mm Inner Width 22mm Sectional Depth Only 500 g per rim 26” ERD 531.8 / 29” ERD 594.4 Dynamal MGR Alloy Construction Patented Oohbah Profile Double Beadnip Technology NEW Satin-Peen Finish Offers Improved Durability and Rich Colors Black / Red / Blue / Green Anodized Colors Currently Available MSRP - 80 USD / 69.90 EURO

When our World Cup level DH and Enduro Racers told us they want the fastest gravity rim on Earth, we listened! Spank and Fratelli Industries have combined all of our experience and technologies into the new Spike Race28 EVO Rim. With an inner width of 23mm and outer width of 28mm, the Spike Race28 leads today’s growing trend toward thinner and faster competition hoops, but without compromising the ultimate strength needed to withstand the rigors of gravity racing. Constructed from Dynamal MGR Alloy, the most advanced rim alloy in our industry today, and employing Spank’s patented Oohbah Profile and Double Beadnip Technology, the Spike Race28 EVO is the perfect synergy of light weight, stiffness, and strength. At only 500g it is perhaps the lightest true gravity rim on Earth! Spank’s double beadnip technology also delivers the best tire retention properties available, and allows for optimal use at a wider range of tire pressures. Perfect for DH Race, Enduro, 4X/DS/GS, and All Mountain use, the Spike Race28 EVO is a true breakthrough in rim technology.

WWW.SPANK-BIKES.COM

SpIkE RAcE28 EVO WHEELSET

This year Spank Industries is proud to present the first in our line of exclusive complete wheelsets! The 1960 g Spike Race28 EVO Wheelset has been developed to offer Gravity Race and AM/Enduro Riders the ultimate in weight optimized competition rims built into remarkably priced, high level, complete wheels. The Spike Race28 EVO Wheelset is offered in a wide range of today’s most popular configurations, including 135 and 150mm (adaptable to 142 and 157mm), rear hub O.L.D., and includes 12mm thru and standard QR rear interfaces, (10mm thru axle adapter kits available). Front wheels come equipped for 20mm thru axle,(standard 9mm QR and 15mm thru axle adapter kits available). Each wheel is hand built and tuned locally, using triple butted Sandvik T302 2.2/1.8/2.0 spokes, and anodized External DSN AC Alloy Nipples to achieve exacting tolerances and the best strength to weight ratio feasible. Additionally the 3 cross lacing pattern offers exceptional added strength to this ultralight sub-2000g Gravity wheelset, putting the Spike Race28 EVO in a class of its own!

• • • • • • • • • • • • • •

Spike Race28 EVO Dynamal Alloy Rims, 23mm inner width, 32H (26” / 29” available) Spank Spoon 9-speed Hubs (with Japanese bearing upgrade) Super-Lite Optimized Steel Freehub Body and Alloy Internal Hub Axle upgrades Sandvik T302 Triple Butted 2.2/1.8/2.0 Spokes Alloy External DSN AC Nipples - Anodized Rear 135mm and 150mm O.L.D. Versions (142mm and 157mm adapters available separately) Rear 12mm Thru Axle and Standard QR adapters included (10mm thru available separately) Front 110mm O.L.D. / 20mm thru (Standard 9mm QR and 15mm thru adapters available separately) 4 color versions - Black/White, Black/Red, Black/Blue, Black Custom color coded hubs, spokes, nipples and rim graphics 26” Front Spokes L259.4mm/R260.7mm (3 cross) 26” Rear Spokes L260.7mm/R259.2mm (3 cross) Hand Built and Trued MSRP - 399 Euro / 499 USD

Spoon-32 Wheelset

The all new Spoon Gravity Wheelset from Spank makes bombproof and beautiful wheels available to everyone! We combined our versatile and economic Spoon32 Rims with the all new Spoon 9-speed hubs, Sandvik T302 2.0 PG Spokes, and Plated Brass Nipples to create the perfect wheelset for DH, FR, DJ, or just about any gravity application at a truly affordable price. The Spoon Wheelset is ready to go out of the box, coming in popular standards 135mm and 150mm rear OLD, (adaptable to 142 and 157mm), with 12mm thru and standard 9mm QR kits included. 20mm thru axle front hubs are standard (adapter standard 9mm QR kits included. 20mm thru axle front hubs are standard (adapter kits to 15mm and 9mm QR available). At 2350g per wheelset this is no heavy weight, but it’s built to take available). At 2350g per wheelset this is no heavy weight, but it’s built to take whatever abuse you can throw at it. throw at it.

• • • • • • • • • • •

Spoon 32 6-Series Rims, 26.7mm inner width, 32H (26”) Spank Spoon 9-Speed Hubs Sandvik T302 2.0 PG Spokes Plated Brass Nipples Rear 135mm and 150mm O.L.D. Versions (142mm and 157mm adapters available separately) Rear 12mm Thru Axle and Standard QR adapters included (10mm thru available separately) Front 110mm O.L.D. x 20mm thru (9mm Std QR and 15mm adapter kits available separately) 4 color versions - Black/Black, Red/Re d, Blue/Blue and Orange Custom color coded hubs and rims Hand Built and Trued MSRP - 329 Euro / 399 USD

WWW.SPANK-BIKES.COM

HubS Spoon-20 Front Hub • • • •

20mm thru axle standard 32H configuration 6-bolt disc mount 15mm and 9mm QR adapter kits available separately • weight: 230g • MSRP 69.00 Euro / 89.90 USD

Spoon-135 Rear Hub • • • • • • • • • • •

9-Speed 135mm OLD x 12mm thru axle Standard 9mm QR adapter kit included 6 bolt disc mount 32H configuration Super-lite steel freehub body / 25 engagement point / 3 pawl alloy internal hub axle Japanese bearings CNC optimized alloy hub body weight: 350 g MSRP 159 Euro / 189 USD

Spoon-150 Rear Hub • • • • • • • • • •

9-Speed 150mm OLD x 12mm thru axle 6 bolt disc mount 32H configuration Super-lite steel freehub body / 25 engagement point / 3 pawl alloy internal hub axle Japanese bearings CNC optimized alloy hub body weight: 370 g MSRP 159 Euro / 189 USD

WWW.SPANK-BIKES.COM

WHEEL AccESSORIES 35mm Tubeless Valves • • • • •

2 pcs per set Presta (F/V) valves (perfect for use with Spank Vomax EVO or Oozy EVO rims) removable valve core for sealant injection molded rubber seal base MSRP 15.90 Euro / 18.90 USD

Fratelli Tubeless Tape

• Advanced Polymer Ultralite Tubeless Conversion Tape • Suitable for use as ultralite rim tape for any rim • 25mm width • Adequate for one wheelset 26”/29”/700c • Works with all Spank Evo Rims • MSRP 9.90 Euro / 11.90 USD

9mm QR Front Hub Adapter cups • •

Converts Spoon front hubs for standard 9mm QR forks MSRP 12.90 Euro / 18.00 USD

15mm Thru Front Hub Adapter cups • •

Converts Spoon front hubs for use with 15mm thru axle/QR forks MSRP 12.90 Euro / 18.00 USD

142mm Rear Hub Adapter kits • • •

Convert Spoon-135 Rear Hubs to 142mm standard OLD Cups and Alloy Internal Hub Axle MSRP 29.90 Euro / 39.90 USD

157mm Rear Hub Adapter kits • • •

Converts Spoon-150 Rear Hubs to 157mm standard OLD Cups and Steel Internal Hub Axle MSRP - TBA

10mm Thru Axle Rear Hub conversion kit • • •

Converts Spoon-135 Rear Hubs to 10mm thru axle type Cup and Alloy Internal Hub Axle MSRP 26.90 Euro / 35.90 USD

Spank Industries - Tech Icon Explanations

Dual XGT - “Dual Extreme Gradual Taper” technology is a proprietary tube drawing process, afforded by Spank's secret state of the art tooling. Dual XGT technology tapers our bars from the thickest area at the bar clamping zone, slowly and GRADUALLY through the bend zones, to the thinnest areas at the control zones...AND...back to thicker reinforced barend zones, or "Impact Ends". Tapers that occur over too short a distance, or with defined start/end points, create isolated stress zones where breaks occur. We have utilized FEA (Finite Element Analysis), laboratory and rigorous real world testing to optimize the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, with can result in imperfections and inconsistency in wall thickness, weakening bars.

3D CNC Bending - Spank went the extra mile by investing in automated Three Dimensional CNC bending machines, which offer better consistency, and even more importantly limit material structural damage during the bending process. Damage caused to competitors bars in traditional harsh bending processes is difficult to measure or detect, leaving the rider at risk.The precision of 3D CNC Bending allows us the optimize further our designs, where others must overbuild with buffer material. Spank has also taken extra steps to ensure the stem clamping area of the bar is uniformly cylindrical and true. This bar-stem interface is critical to improved fatigue life, and ability to withstand extreme loads.

XGT - Spank's XGT or "Extreme Gradual Taper" bars were designed to taper GRADUALLY and CONTINUOUSLY from reinforced wall thicknesses at the stem clamping zone, all the way to the barends. This allows energy to dissipate over a consistent and gradual tapering within the inner core, leading to improved strength, and better dampening of hard hits and chatter. To the rider, this means enhanced control and less pain! Similarly to our Dual XGT technology, extreme precision in the drawing process, allows us to optimize weights, and reduce the need for heavy hand grinding.

Oohbah (Patented) Rim Profiles - The most important features of any rim are rigidity and weight. Rigidity or stiffness means more of your energy is transferred into drive force, (rather than flex) and acceleration/cornering/braking performance is improved. Reducing rolling weight in your wheels, more so than any other part on your bike, can dramatically reduce the energy needed to propel it forward. Take a look at a cross section of any given rim on the market. You'll see that both the outer and inner walls are concave. Now check out a Spank rim. Our unique patented Oohbah™ profile with inverted tube well, increases rigidity immensely compared with rims currently available. The combination of a concave outer wall with a convex inner tube well, results in the addition of a new, never before seen “hoop strength” in the sectional profile, which lends massive strength and stiffness to the rim as a

whole, and places the center of inertia in the optimum possition nearer the center of the profile. Furthermore the “wave” shape of the Oohbah inner tube well acts like corrugated steel roofing to add strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker to offer the same support. The increased strength and rigidity offered by our Oohbah™ profile affords us the opportunity to optimize wall thicknesses and material transitions, drastically reducing weight…AND…allows us to offer rims with greater widths, at much lower weights than our competitors. Wider rims mean stiffer wheels and more tire spread, leading to greater traction and improved comfort.

MGR - Micro or Mechanical Grain Refinement, refers to mechanical processes which optimize the reduction and consistency of a given alloy's grain size and structure. All alloys are cast during alloying. Some are worked using high strain processes such as forging or extrusion, which strengthen material by reducing the grain size. New technologies employed at Spank Industries, have been developed to incorporate high strain and low reduction, while extruding alloys in multiple steps. These special processes allow significant further reduction of grain sizes as well as improved grain orientations, when compared to normal forging or extrusion. The result is increased ultimate strength, toughness, and ductility. When paired with recent advancements in alloy compositions, MGR alloys improve on components' yeild ability to resist denting and deformation, while retaining their absolute strength and hardness. MGR material refinement has now been employed in the production of Spank rims, bars, and stems.

Double Beadnip ™ - Another secret of Spank's patented Oobah profile, is our double Beadnip™. Traditional rim designs include only one set, called the bead hooks on the vertical walls or rim flanges. The addition of a second set of “nips” on the inner tube well ensures the tire always remains in the bead-seat, even when riding at minimal tire pressures. Without it, on conventional rim designs the bead can slip inwards, leading to snake bites (pinch flats). With Spank’s Oohbah patented rims, you can ride the tires you want, at the pressure you want, on any terrain…with far less fear of flats!

Fratelli Industries - Spank has partnered with the state of the art Fratelli Industries Rim Production Facility. The unique ability to drive material, tooling and process, and product development in-house, has afforded us the opportunity to leap years ahead of the competition from a technical standpoint. o *Proprietary alloys o *Micro Grain Refinement Process capabilities o *Highest precision extrusion o *Proprietary rim forming tooling and technologies o *Advanced virtual testing and analysis o *Industry leading empirical testing practices

Spank Industries Material Technologies New advancements in alloy chemical compositions have been changing the way we look at aluminum. 6-series alloys, or magnesium-silicon laced aluminum, have long been known for their tremendous formability properties, fatigue life, and resistance to corrosion, and have taken an important role in the production of complex bicycle components. However, commonly used members of this group such as 6005 and 6061 aluminum, suffer from relatively low ultimate tensile strength and yield values, and are not ideal for all applications, especially highly weight optimized rims. Spank enlisted industry experts and metallurgy researchers from around the world, and invested heavily in an in-house rim development and production facility, in a quest to isolate the perfect blend for each specific application.

â&#x2014;?

"Dynamal" is a new, rare, virgin alloy composition. Unlike standard recycled alloy mixes, Dynamal is a dynamically aged highly magnesium-silicon enriched, pure alloy. Compared to statically aged traditional alloy types, Dynamal shows a significant further increase in ultimate tensile strength and yield, without the normal reductions in fatigue life. Imported and rare in our industry, Dynamal is used in the production of our race inspired VoMax and Spike rim lines. It offers unparalleled rigidity in rims and a never before seen resistance to permanent deformation.

â&#x2014;? "Super-6" Aluminum is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff rims. Through recent adoption of Super-6 materials, Spank's Oozy, Subrosa, Tweet Tweet, and Stiffy rim lines are now stronger, and show greater resistance to deformation than ever before! â&#x2014;? Zirconium Doped Alloys are special 7-series alloys which offer extremely high hardness and strength. Spank has found the ideal Zirconium doped 7-series blend for specific stems and handlebars which require very low weights and high ultimate strength. Zirconium doped 7-series alloys are denser than other alloys used in the bike industry, thus heavier, but allow thinner wall thicknesses and less buffer material, and thus can create lighter parts if used carefully in conjunction with finite element analysis and rigorous lab testing. It is interesting to note that many companies will always label their most expensive parts as 7-series alloy (7050 or 7075). However, this material is not ideal for all applications, and may actually be the wrong material for components like highly weight optimized rims.

Traction/Stiffness/Weight Coefficient Chart *The Traction/Stiffness/Weight Coefficient of any given rim is a simple index that can be created by dividing the weight of the rim by the inner width of the rim. Normally the lower the Traction/Stiffness/Weight Coefficient the better the performance of the rim. An index of rougly 20-21 indicates a rim that has been highly optimized for weight and performance. Compare to:

Discipline

Brand

Model

Material

ETRTO (inner width-mm)

Trail

All Mountain

EX FR

Compare (%)

Weight

Index

Spank

VoMax EVO

Dynamal

16.5

100%

340 g

100%

XR350

Alloy

103%

350 g

103%

DT Swiss

XRC300

Carbon

103%

310 g

91%

XC717

Maxtal

103%

395 g

116%

Atomlab

Price

Traction / Stiffness / Weight Compare (% Coeffecient of Spank) (weight/width) MSRP (USD)

DT Swiss Mavic XC Race

Inner Width

20.6 20.6 18.2 23.2

$90 $84 $737 $85

Not offered

Spank

Oozy EVO

Super -6

100%

430 g

100%

DT Swiss

M480

Alloy

19.5

97%

480 g

112%

DT Swiss

X430

Alloy

110%

430 g

100%

Mavic

XM719

Maxtal

95%

460 g

107%

Mavic

XM317

6106

85%

445 g

103%

Atomlab

Superlite

6061

95%

500 g

116%

Spank

Subrosa EVO

Super-6

24.5

100%

518 g

100%

DT Swiss

EX500

Alloy

86%

500 g

97%

Mavic

EN321

6-series

86%

570 g

110%

Mavic

EN521

6106

86%

540 g

104%

Atomlab

Pimplite

6061

86%

630 g

122%

Spank

Spike EVO

Dynamal

100%

599 g

119%

Spank

Spike Race28 EVO

Dynamal

73%

500 g

100%

DT Swiss

FR600

Alloy

83%

600 g

120%

Mavic

EX721

Maxtal

70%

590 g

118%

Mavic

EX729

Maxtal

97%

675 g

135%

Atomlab

Pimp

6061

80%

730 g

126%

Spank

Stiffy EVO

Super-6

100%

680 g

100%

DT Swiss

F630

Alloy

71%

630 g

93%

Mavic

EX325

6-series

71%

716 g

105%

Mavic

EX729

Maxtal

83%

675 g

99%

Atomlab

GI (?)

6061

69%

740 g

109%

21.5 24.6 23.9 24.2 26.2 26.3 21.1 23.8 27.1 25.7 28.6 20 21.7 24 28 23.3 30.4 19.4 25.2 28.6 27 30.8

$69 $49 $49 $85 $70 $69 $74-80 $89 $50 $60 $70 $80-90 $80-90 $101 $85 $99 $70 $80 $63 $55 $99 $46

*Most manufacturers will list the outer width of the rim, but it is the inner width (from beadnip to beadnip) which actually controls the spread of the tire, and thus is used to calculate this index. This dimension is normally shown as ETRTO and describes the diameter of the rim x inner width of the rim. For the purpose of this index calculation, rim diameters have been excluded. *Wider rims increase stiffness and tire-spread. Improved stiffness results in better performance, responsiveness, and toughness.Greater tire spread leads to increased traction, and allows use at lower air pressures, improving comfort. *Of course other variables such as material type, and cost must be considered to gauge the Value and Toughness of the rim against its Traction/Stiffness/Weight Coefficient. For example the DT Swiss XRC300 Carbon rim scores an incredible 18.2, but at $737 MSRP it is considerably more expensive than other rims in this comparison. Also, carbon maybe light, but will not show the same toughness at alloys in rim applications.

Spank Industries FAQ How do I choose which level of Spank parts is right for my riding style? – Spank uses this convenient diagram to show the disciplines that we had in mind when we designed our components. All Spank products were designed with safety first, so it is possible to go outside of these recommendations depending on your size, weight, and riding style. However, no matter how well our products do in reviews and testing, we don’t recommend that products designed for XC or Trail riding are used for applications like big-hit freeride or DH. Here is a quick breakdown of our recommendations.

o VoMax – “Pure XC Race” – the lightest parts in our range, designed for XC race applications,

touring, and trail riding. If you are a looking to shave those last few grams from your race machine, or riding long hours uphill, and you don’t often hit the big jumps and drops on the way down, then the VoMax line is made for you. Vomax rims’ strength to weight ratio and tire retention at this weight can’t be beat, making them the perfect choice for racers and touring riders who don’t want to give up confidence to achieve the lightest complete builds possible.

o Oozy – “The Perfect All Mountain or Aggressive XC Solution” – the Oozy line was designed to

offer all the strength and stiffness needed for aggressive trail and all mountain use, while remaining lighter than many of our competitors’ strictly XC components. Oozy is meant to offer you the confidence to push your limits both on the way up and on the way down your favorite trail, without the risk of walking your steed home. If you are equally at home on long grueling climbs, and fast, rough descents, then the Oozy was made for you.

o Subrosa - “The Definition of All-Round Performance - Strong enough for Freeride or DH, Still

Light Enough for All Mountain and DJ Applications” – Spank’s Subrosa line remains our most versatile and popular collection of components. Subrosa parts were designed to enhance your experience in any aggressive riding application and take just about anything you can throw at them. A Subrosa rider might start their day with a long climb to the trail head, a rough descent with scattered drops and jumps back down to town, and then finish with a trip to the local jump spot to practice some new stunts. For riders that want to push the limits but don’t necessarily like the weights normally involved with Freeride or DH components, or riders who want one bike spec that can do it all, we give you Subrosa. Subrosa was not designed for the everyday DH rider, but you will see Subrosa parts on World Cup DH/4X/DS bikes around the world! Although we recommend our DH or Big Hit Freeride lines for those of you who really dish out the punishment, if you are an extremely weight conscious rider, who still wants to go big…then Subrosa is the way to go.

o Spike - “Fully Weight Optimized - DH Race Ready” – Spank approached our Spike line with one thing in mind…making the best possible race ready DH products on Earth. Every part in the Spike line has been optimized to levels never before seen. To achieve such remarkable weights on DH parts, Spank had to turn to new age alloys, and special micro-grain-refinement production processes, combined with finite element analysis testing during the design phases.

Aside from weight, we worked closely with our pro-riders to offer designs that enhance rider positioning and handling performance. Long gone are the days of point and shoot DH rigs that handle like a truck unless pointed down a vertical wall. If you are a racer looking for absolute confidence in your parts, but still hate the weights involved with the average DH/FR gear out there, or you are a heavy or exceptionally rough rider who doesn’t always trust All Mountain offerings…try Spike, you won’t turn back.

Stiffy - “The Ultimate Extreme Freeride and Big Hit Gear” – Not many bike brands make gear with people like Josh Bender in mind. But, there are people out there who dream of pushing their bodies and bikes to the limits and beyond. For them Spank offers our Stiffy line of components. There are no better products on Earth for extreme Freeride or Big-Hit applications. 40mm rims offer the ultimate in stiffness and tire spread/traction for the most challenging of terrain and strength that cannot be compared, and the Stiffy line of handlebars offer insane stiffness and strength at reasonable weights. If you are more concerned about landing that 50 footer and riding away with a smile on your face than how long it takes you to ride back to the trail head, then we recommend Stiffy. Just be warned, they may be with you for the rest of your life!

o Tweet Tweet – “Up, Up, and Away” – Spank has earned a spot in the hearts of dirt/urban/park pilots world wide with our legendary Tweet Tweet line of components. Every part in the Tweet line was designed for one specific purpose…flying high and looking good doing it! Tweet Tweet components are highly weight optimized, meaning finally there are options out there for jumpers who don’t want to be “weighed down” with heavy freeride gear but refuse to take risks with lighter parts meant for life on the ground. We use high end alloys, and intensive testing to make sure that Tweet components can take the daily abuse of urban/park/dirt applications, but still build up bikes that flip, whip and spin with ease. Profiles and dimensions were painstakingly perfected for freestyle. Wanna fly Billy? Tweet Tweet was built for you.

o Spoon – Spank’s newest line “Spoon”, fills a gap in our Gravity Gear lines. The Spoon frame

(one2one), and all the Spoon components were designed to meet the needs of dirt jumpers and DH riders, who demand quality, dependability, AND reasonable prices. We have put our investments into making the Spoon line bombproof. Although not as light or highly detailed as the Tweet line for DJ or the Spike line for DH, Spoon offers the same confidence to riders at a reduced price. Graphics and finishes have been chosen to reflect the wishes of “Core” riders world wide, down-toned, minimal, and tough. The Spoon rims and wheels are equally at home on the DH course and in the skate-park or jumps. Need top end gear without the top end price… we give you Spoon.

How do I know if a Spank rim is an EVO or non-EVO version? – On all the EVO rims there are two distinguishing points you can see easily. First is the EVO tattoo, which is located directly across from the valve hole. The second mark is a material indicator decal which will read “Dynamal” (on Vomax and Spike rims), or “Super-6” (on Subrosa, Oozy, and Stiffy rims). It is important that when you buy a set of Spank rims, you check the dimensions for your wheel build. There are some important differences in profiles, which will affect your spoke lengths.

Are Spank rims pinned, welded, or sleeved? – There are 3 types of Spank rim joints, which are selected to achieve the perfect rim for specific applications. o Spank’s “Pure XC Race Inspired” VoMax rims are flashwelded, which allows us to approach the absolute lowest possible weight, while remaining stronger than the competitors’ ultra-light XC hoops due to our choice of new era Dynamal Alloy, and the employment of Micro-Grain-Refinement Processing. o Spike EVO, Stiffy EVO, Subrosa EVO, Oozy EVO, and Tweet Tweet rims are sleeved. This is a process of joining the two ends of a hoop with an extremely precise light weight sleeve, which fits inside the rim profile. Sleeved joints offer the best possible strength to

weight ratio, meaning our multi-disciplinary rims remain bomb-proof, while still being much lighter than traditional pinned joint rims. Because sleeved rims are not subjected to the high temperatures of welding, they do not require a precise second heat treatment process after welding and offer better consistency in ultimate strength. Tweet Tweet EVO, and Spoon Rims are created with pinned joints, which offer the rider a great balance between cost and strength. Pinned joints are very dependable, although a little heavier than welded or sleeved, and mean riders can achieve quality wheel builds without big ticket prices.

Why doesn’t Spank use eyelets on Spank Rims? – Soft, malleable, alloy eyelets go against Spank’s Oohbah rim philosophy for several reasons. Eyelets normally rely on isolated points of contact with the nipple. This means specific “point-load” zones are created, which put immense pressure on small points, and can lead to deformation of the eyelets. Eyelets are usually softer than the rims to allow this, but soft eyelets can eventually crack or pull through the rim itself! Another annoying problem with rims assembled from more than 30 separate parts, is eyelets can come loose as they deform, and rattle, buzz, or even cut short the life of a perfectly good hoop. The combination of Spank’s patented Oohbah profile, and our investment into precision machining of the spoke beds on our rims, results in what we call “Orbital Nipple Seats”. By tightly matching the radius of the inside wall of the nipple seat to the inner radius of the hoop itself, then machining out the spoke holes at the perfect angles, Spank has created nipple seats that allow 360° of contact between the nipple and the rim. This distributes the load from the spokes evenly, vastly reducing the chance of pulling a nipple through the rim or eyelet. So, if we can create rims with stronger nipple seats, lower weights, and just two parts instead of 34…a better question might be “Why are other companies still using eyelets?”

What has changed on the new EVO rims? – Spank’s new EVO rim line is an EVOlution in rim technology! We have built on our legendary Oohbah patented profiles to now offer the strongest and lightest rims in their price ranges! o First, and perhaps most importantly, Spank has invested into a state of the art rim development and production facility, Fratelli Industries. This allowed us to develop new tooling, and production processes, and work with materials that were formerly not available in traditional rim factories. o Through our tireless efforts, Spank isolated the perfect alloy for each specific EVO rim application. For our race inspired Vomax EVO and Spike EVO rims, we have adopted the new era alloy Dynamal. For our multi-disciplinary Stiffy EVO, Subrosa EVO, and Oozy EVO rims, we have found that Super-6 alloy is the ideal blend. With these materials Spank was able to reduce weights by 5-15% across the board, increase rigidity and strength by up to 20%, and improve our yield/elongation by up to 45%, meaning lighter, stronger rims with better resistance to permanent deformation than ever thought possible. You can learn more about these materials in our technical information section of this website at this link. o All Spank rims are created by our own tooling, meaning you will never see the same profile on one of our competitor’s hoops or from an open model OEM producer. Years of experience with our patented Oohbah profile tooling, mixed with improvements resulting from new materials, meant we have been able to further optimize wall thicknesses and transitions, further reducing weights! Since the profiles of the EVO rims have been trimmed and modernized, please be careful to always take dimensional spec information from only EVO rim charts before ordering spokes for your wheel build. o Another advantage of Spank’s new EVO rim line is the incorporation of our proprietary MGR (micro-grain-refinement) processes into production. By adding additional work steps to our manufacturing processes, Spank dynamically ages and work hardens the base material. By doing so, we are also able to create rims (and handlebars), with more consistent, smaller grain structures. The smaller and more consistent the grain size of any given material, the stronger the final product! o Finally we have topped off the new EVO lines with new graphics and an EVO tattoo, located directly across from the valve hole.

What’s Oohbah and how does it improve the performance of my wheels and bike? Spank’s Oohbah patent is pretty simple as a concept, but took years of tooling experiments and various iterations on design to accomplish. The idea is this; a very important type of the strength in a rim is called “hoop strength”. Hoop strength is easy to understand. A circle, as a shape is very strong. If you took a long straight section of a rim’s thin extruded aluminum material, it would offer little resistance to bending. That same material, when bent into a hoop, can withstand much greater forces without deformation. If you cut out a sectional profile of any rim, you will find there are two horizontal walls creating a chamber, an outer wall of material, and an inner wall of material (the tube well). On any traditional rim, both of these walls are concave. Meaning they both curve inward like a bowl. Note: It’s easy to find sectional profile drawings on any rim maker’s website. Now, take a look at the Oohbah profile on the attached photo. The inner wall is curved outward, or it is convex. This is very important. The effect of one concave wall and one convex wall create a second feature of “hoop strength” in the sectional profile. In essence this allows the rim to approach a toroidal shape, which has the lowest mass and highest stiffness on all planes. This adds immense additional rigidity to the rim as a whole. It creates a positive force of resistance to deformation of the rims straightness and sidewalls (vertical walls), as well as lending further stiffness to the rim, (which improves performance). Think of it this way…If you take an egg, and apply equal force to two sides, it is remarkably strong. Now, if you took two haves of the same shell, and put them together, both in the same direction, they could withstand very little force without caving in. The incredible stiffness and strength that results allows us to reduce the thickness of the material, reducing weight. It is also worth noting that the “wave” shape of the inner tube well wall on an Oohbah rim, is also far stronger than an traditional design flat or curved wall. A great analogy to explain this is corrugated steel roofing, which can easily support your weight if you walk across a roof. Flat sheet metal of the same thickness would buckle and fail immediately under the same force. On other rims, as the curved tube well bends downward under pressure, it pulls the sidewalls inward causing them to fail and eventually collapse. Oohbah tube wells stay stable and support the side walls, maintaining the form of the rim. Having a lighter, stronger design affords us a really cool opportunity. It allows us to create wider rims than anyone else at equal or lower weights. The wider a rim’s material, the more rigid the hoop is. Rigidity means less of your energy goes into flex, and more to the ground and your cornering and braking performance are improved. Wider rims also mean greater “tire spread”, meaning more of your tire’s treads are in contact with the ground, and your “traction” or grip on the ground improves. So, wide rims equal better stiffness and traction. If you look at any of our competitors’ rims, compare weights to find similar models, and then compare widths, ours are usually 5 mm or more wider, (and often still lighter). The second major feature is the addition of a second set of “beadnips”, on the inner wall of the rim. Beadnips hold the tire’s bead in place (the bead-seat) when you are riding. Almost all rims have one on each side of the rim, at the top of the vertical walls. They keep the tire’s bead from slipping upward and coming off the rim. That is very important. However, there is a second type of flat that called snake bites, or pinch flats. This is when the bead of the tire slips inward, out of the bead-seat, toward the center of the rim. Then the sidewall of the tire collapses, and the tube is pinched, creating two holes (top and bottom of tube), and a flat tire. We have added a second set of beadnips, on the inside of the bead-seat. This keeps the tire in the correct position, even when riding at very low air pressures. Anyone who rides will understand that sometimes, especially on rough and loose terrain, that lower tire pressures improve traction and comfort. With other rims, when you lower your air pressure you run a high risk of pinch flats. Spank rims can run much lower air pressures with significantly reduced fear of flats! That’s Oobah!”

Why did my spokes loosen after my first ride? – Spank Oohbah profile rims are designed for ultimate stiffness. In fact, the profile and advanced materials incorporated into our rims make them so stiff, that after your first good ride your spokes will often stretch, making them feel a little loose. This is normal and does not normally affect trueness. With competitors’ rims, the rim itself, or soft malleable eyelets often deform slightly under initial forces before the spokes and this effect may not be noticed by the rider as the spokes feel tight. New wheels should be tuned, then stressed, and finally retuned to the exact desired torque, locking in that trueness and desired feel. Once achieved, most riders report they can run Spank wheels for years without truing! Note: We always suggest that spoke prep is used in every Spank Wheel build to improve on the build quality and torque retention.

What do I do if I dented my Spank rim? – Don’t worry! Spank rims were designed with safety and finishing your ride/race as primary points of focus. Spank rims almost never bend or “taco”, meaning even under extreme punishment like direct hits that compress the tire and result in direct contact with the rim, normally our rims will at worst dent on the vertical flange. Although we understand that everyone likes a pretty bike, and dents don’t look good, they are in fact a blessing. Traditional rim designs fold over under far less pressure or crack when struck directly, and thus leave you stranded or worse. Spank rims, with our patented Oohbah profiles, provide far more support to the vertical rim flange walls of the rim, and even after a severe hit that causes a dent, usually still hold the tire in place, rarely bending to the point that you can’t finish your run. Additionally, Spank rims are constructed of some of the best alloys available on the planet. This means that they can accept a little “reworking” if done carefully. When many other rims get quite brittle to achieve the hardness required, and would crack if you tried to bend out a dent, Spank rims readily accept a little manipulation. We do not warranty against damage caused by attempts to rework a rim, but if you have a dent and want to try, you can attempt the following. Protect the rim from damage caused by pliers with a section of old inner tube or a strong fabric. Grasp the rim firmly at the dented area with pliers and slowly, in baby steps, bend the dented area back slightly. You don’t need to get it perfect. The double bead nips and strong bead hook on our rims enhance tire retention, and will allow you to run a dented rim for years without risk!

Can I cut my Dual XGT handlebar? – Dual XGT handlebars are created with “Impact Ends”, which are reinforced, thickened barend zones on the bar. On our Dual XGT bars, Spank has marked the allowable cutting zones with convenient cut-lines. It is possible to cut roughly 20mm from each end without compromising the function of the “Impact Ends”, or voiding warranty. This means a Spike 777 EVO bar (for example) can be cut from 777 mm to a minimum of 747 mm. For this reason, Spank now offers Dual XGT bars in the Spike 777 EVO, and Subrosa 747 EVO, which share similar geometries, tapers, and thicknesses and allow a range of 777mm to 717mm. For riders looking for something a little trimmer in a Dual XGT model, we now offer our new Oozy line of 700mm bars for XC/Aggressive Trail.

I like to compete with very light wheels. Are the Oozy and Vomax rims okay for DS/4X or DJ? – Spank’s Vomax line was designed with only one thing in mind…winning XC races at the highest levels. Although there have been a few reviews where test riders successfully took the Vomax rims to new horizons to see just how much they could take, we do not warranty the Vomax against freestyle or gravity applications like 4X or Dual Slalom, and do not suggest that they are used for these purposes. The Oozy line on the other hand was designed for mixed discipline use. It is equally at home in All Mountain and XC applications. Several of our pro-riders use an Oozy spec for DJ and 4X/DS competition. At Spank we suggest that Oozy be applied to aggressive gravity disciplines if you are a very smooth, but not exceptionally large rider.

How are the new Tweet and Spoon One2One Frames different than last year? â&#x20AC;&#x201C; The new Tweet and One2One frames have been through a major update this year. After years of research with our pro riders and consumers, the direction was clear but truly challenging. The goal was to preserve the lightness and overall feel (what our riders call whipability), of these models while improving on toe clearance during spin tricks, and downtube clearance for some forks with taller adjustment knobs, as well as to optimize responsiveness in pedal bursts and power hops for todayâ&#x20AC;&#x2122;s bigger and bigger slopestyle courses and DJ lines. To achieve this without increasing overall wheelbase, we lengthened the top tube slightly, and reduced the total length of the rear triangle. In the process, we tightened the whole rear triangle while maintaining clearance for larger diameter tires by tuning our chain/seat stay bend tooling. To complete the new rear triangle, Spank invested in forge tooling to create the lightest and strongest rear dropout we could. This new custom dropout is knurled to reduce annoying axle slip in the horizontal drops. The seat tube too was shortened to compliment the new rear triangle, and allow riders to slam that saddle. To keep the weight under 2.5kg, Spank has implemented a new double butted tube set, with a classic round profile. Finally, all new welding fixtures and angles had to be worked out to allow for all the changes. Our riders were stoked to find that we were able to achieve all of this without revising the comfortable 69 degree head tube angle and short wheel base they loved. The Tweet was topped off with an all new graphics package over our brilliantly translucent ECO coat finish in black, aqua blue, apple red, eggplant purple or chrome. To keep the One2One attractive to the Core Rider, its finished in a matte powder coat with down-toned graphics, black on black or white on toxic wasabi green.

WWW.SPANK-BIKES.COM

2011 EUROPEAN TEAM Spank Industries has been quietly adding to their global pro teams lately in a big way. Recently Spank announced their new 2011 European pro team rider’s roster, and you might be surprised at some of the new names you see, including the likes of Yannick Granieri, Michal Prokop and Bienvenido Aguado Alba to name a few. Our goal this year at Spank was to improve vastly on the level of support we offered both pro’s and grassroots riders all over the world. This started as a pretty simple “feel good” target, but has grown into a massive undertaking. Today we are proud to say that we’ve finalized strong European and North American pro teams, and a list of grassroots riders in which we see massive potential. It’s hard to explain how excited we are about 2011. With lots of new products, amazing new riders, and some tricks up our sleeves for upcoming Interbike and Eurobike Trade Shows, it’s a big year for Spank!” Here is a brief breakdown of the Spank Industries European Pro Team for 2011

Germany Also: Pierre Grawitter – DJ/Slope Nico Scholze – DJ/Slope Louis Brethauer – 4X / FR Andi Wittmann – DJ/Slope

Rob Jauch – All Disciplines

Martin Kiesewetter – DJ/Slopeer – 4X

Laura Brethauer – 4X

Tibor Simai – All Disciplines

Andi Brewi – DJ / Slope

Valentin Izarn – DJ / Slopeope

France

Yannick Granieri – DJ / Slope

Team Morewood United World Cup DH/4X: Fabian Cousinie (France) Mickael Pascal (France) Tim Bentley (South Africa)

Triinu Laurits – DH

Baltic States

Michal Prokop – 4X

Czech Republc

Martin Hanak – DH

Bienvenido “The Spanish Fly” Aguado Alba – DJ / Slope

Spain

Miguel Mauri Quetglas - DH

Richard Santana Ramos - DH Nicolau Alemany Suau – DH

Hector Saura Lopez – DJ / Slope

Albert Julia Masso - DH

Ryan Nangles

United Kingdom Matt Cooper – DJ / Slope Ryan Nangles – DJ / Slope

Oscar Golding – DJ/Slope

Toby Ware – DJ / Slope

Oscar Golding

James Wilson / Jason Egan – 4X

Team Southern Downhill Sam Boardman – DH Will Soffe – DH Tom Evans – DH Guy Gibbs – DH

WWW.SPANK-BIKES.COM

2011 NORTH AMERICAN TEAM Following up on the recent announcement of the all new European Spank Pro Team, Spank Industries has just released the 2011 North American Pro Team Roster. There are a few familiar faces here, and a lot of new additions. It’s obvious that Spank is putting a lot of investment into their riders, given the scope of sponsorships and some of the names they have brought on board around the world! Just as interesting is the Spank Grassroots program…The “Spank Disciples”, where dozens of young up and comers across USA and Canada are gaining the support they need to push it to the next level, and earn the chance to move up to pro team status. Here is a quick breakdown of the N.A. Pro Team as it stands now.

Dominic Megali – DJ / Slope / FR

Cody Gesel –DJ / Slope

Tammy Donahugh – All Disciplines

Erik Nelson: Commencal/BTI Pro Team -DH / DS

U.S.A. Austin “Ice Cold AC” Chipman – DJ / Slope

Ryan Berrecloth – All Disciplines Brett Rheeder – DJ/ Slope Paul Genovese – DJ / Slope

Brendan HoweyCommencal Young Guns Team

Kenny Smith –DH / FR

Cam Hilts – DH

Canada Team PerformX: Remi Gauvin & Kyle Sangers – DH

Jarrett Moore –DJ / Slope

Forrest Riesco – DH

Garrett Robertson – DJ / Slope

ALL NEW SPIKE EVO SERIES SPIKE EVO 35AL DH RACE RIM

DYNAMAL ALLOY / EVO OPTIMIZED OOHBAH PROFILE 35mm WIDE / ONLY 599g

SPIKE 777 EVO BAR

SUPER 6 ALLOY / DUAL EXTREME GRADUAL TAPER AND IMPACT ENDS Ø31.8 – 5/15/30/50mm RISES / FROM 280g

SPIKE STEM

ZIRCONIUM DOPED ALLOY / IMPROVED CLAMPING MECHANISM NEW CUSTOM 7-SERIES ULTRALITE SPACERS 140g + 20g (INTEGRATED TOPCAP)

SPIKE DIRECTOR STEM

STRONGER-STIFFER-SMARTER / ZIRCONIUM DOPED ALLOY NEGATIVE RISE DROPPED BARCLAMP / 130g + 20g (SEALED TOPCAP)

QBP www.qbp.com

BTI www.bti-usa.com

AMERICAN SALES OFFICE LANCE TUELLER entradaimports@gmail.com

www.vogdesigns.com photo:Marco Toniolo

3D CNC Bending –Three Dimensional CNC bending machines, offer better consistency, and more importantly limit material and structural damage in the bending process. Damage caused to competitors’ bars in harsh traditional bending processes is difficult to measure, and put the rider at risk. 3D CNC bending allows us to optimize our designs where others must overbuild with buffer material. Spank has also taken steps in our shaping processes to ensure that the barclamping area is uniformly cylindrical and as true as possible. Improving the bar-stem interface is critical to withstanding extreme loads and improving fatigue life.

MGR - Micro Grain Refinement – Processes such as extrusion, forging and tube drawing can increase the strength of alloy materials by reducing the grain size. Spank uses state of the art proprietary metal forming methods which further improve grain size consistency and orientation, and significantly reduce the grain size beyond that of our competitors. No other bars are subjected to the number of drawing steps, or level of refinement as those offered by Spank. This leads to greater ultimate strength, toughness, and ductility...meaning confidence, comfort and safety.

Dual XGT with Impact Ends – XGT or “Extreme Gradual Taper” technology is a proprietary tube drawing process, afforded by state of the art tooling. Dual XGT technology tapers our bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest area at the control mount zone, AND back to a thicker reinforced barend zone. Tapers that occur over too short a distance, or with defined start/end points, create isolated stress zones where breaks occur. Dual XGT designs with Impact Ends optimize thicknesses to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! Extreme precision enabled by Dual XGT drawing processes also eliminates the need for excessive hand grinding, with can result in imperfections and inconsistency in wall thickness, weakening bars.

WWW.VOGDESIGNS.COM RIDER: ROB J PHOTO: MARCO TONIOLO

*PATENTED OohBah™ PROFILES FOR THE STRONGEST RIMS ON EARTH *NEW DYNAMAL™ AND SUPER-6™ ALLOY CONSTRUCTION *ALL NEW SLEEK AND SEXY EVO PROFILES *5-15% REDUCTIONS IN WEIGHT ON ALL EVO RIMS *UP TO 20% INCREASE IN RIGIDITY ON ALL EVO RIMS *LOWEST TRACTION/STIFFNESS/WEIGHT-COEFFICIENTS ON THE MARKET *MGR™ - MICRO GRAIN REFINEMENT

SPANK EVO RIM TECHNICAL ADVANCEMENTS Patented

OohBah™ - REVERSED WELL DESIGN

SPANK’s patented OohBah™ profile combines a concave outer wall with a convex inner tube well resulting in a never before seen “hoop strength” in the sectional profile. OohBah™ “wave” inner tube wells remain stable under immense loads, offering greater support to the side walls than traditional straight or curved tube wells. Stronger, lighter designs mean SPANK can offer wider rims than anyone, meaning further increases in stiffness and greater tirespread, traction, and comfort.

ADVANCED ALLOY COMPOSITIONS

DOUBLE BeadNip™

The addition of a second set of BeadNip™ on the inner tube well ensures the tire always remains in the beadseat, even when riding at minimal air pressures. Competitors’ rims allow the bead to slip inward leading to snakebites (pinch-flats).

WWW.SPANK-BIKES.COM QBP BTI www.qbp.com www.bti-usa.com

AMERICAN SALES OFFICE LANCE TUELLER entradaimports@gmail.com

Common rim alloys 6061 and 6005, although easy to work with, suffer from relatively poor yield, ultimate strength and fatigue life. In a quest to isolate the perfect alloy blend for each specific application, SPANK has enlisted metallurgists and industry experts from around the world. For our new EVO line of rims, we have adopted rare new age alloys, which offer unparalelled strength and yield values. All SPANK EVO rims receive additional micro grain refinement - MGR processes, meaning greater rigidity and better resistance to denting and permanent deformation than ever before! DYNAMAL SUPER-6 6061 6005

DYNAMAL SUPER-6 6061 6005

100% 100%

125%

66%

100% 83%

100% 86%

127%

145%

“DYNAMAL™” is a new, rare, virgin alloy composition. Unlike standard recycled alloy mixes, DYNAMAL™ is a dynamically aged, complex, highly magnesium-silicon-copper enriched, pure alloy. Compared to statically aged traditional alloy types, DYNAMAL™ shows a significant further increase in ultimate tensile strength and yield, without the normal reductions in fatigue life. Where 6061 measures impurities in parts per thousand, DYNAMAL™ measures them in parts per million. DYNAMAL™ is composed of 11 alloying elements and 4 restricted elements, compared to just 6 alloying elements and a few restrictors in 6061. Imported and rare in our industry, DYNAMAL™ is used in the production of our race inspired VoMax and Spike rim lines. It offers unparalleled rigidity in rims and a never before seen resistance to permanent deformation.

Super-6™ aluminum is a specially blended magnesium-silicon-copper enriched, work-hardened alloy. Super-6™ offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile 150% strength to standard 6 series alloys. Super-6™ alloy is composed of 8 alloying elements and 4 restrictors. 130% It is ideal fo rhe creation of thin walled, super stiff rims. Through the recent adoption of Super-6 materials, SPANK’s Oozy, Subrosa, and Stiffy rim lines are now stronger and show greater resistance to deformation than ever thought possible.

www.vogdesigns.com photo:Markus Greber

TUGG JOB GRIP - Scented Fruity Flavors

Sports Nut GmbH

TEL: +49(0)7121 - 1447740 E-MAIL: contact@sports-nut.de WEB: www.sports-nut.de Exclusive Distributor for: ATOMLAB, BLACX, BLK MRKT, BOS, GRAVITY DROPPER, KALI, MOREWOOD, MUC OFF, STRAITLINE, SOMBRIO, SHAMAN RACING, SPANK, THE HIVE CH: www.intercycle.com

www.vogdesigns.com

RHUK

UK Distributor www.ridinghighuk.com Phone: (01458) 850274

Photocredit: davidulrich.de

CONGRATULATIONS!

vogdesigns.com

THE FIRST CORK 720 EVER STOMPED IN COMPETITION!

WINNER OF BEST TRICK – VIENNA AIR KINGS 2010! CHECK THE VIDEO AT

TWEET TWEET RIM

LOUNGEBAR “SHARE THE AIR” SADDLE

Sports Nut GmbH TEL: +49(0)7121 - 1447740 E-MAIL: contact@sports-nut.de WEB: www.sports-nut.de

ANDI WITTMANN SIGNATURE SERIES

SPIKE STEM

Exclusive Distributor for: ATOMLAB, BLACX, BLK MRKT, BOS, GRAVITY DROPPER, KALI, MOREWOOD, MUC OFF, STRAITLINE, SOMBRIO, SHAMAN RACING, SPANK CH: www.intercycle.com

Spank Industries Invests in Exclusive Rim Manufacturer Fratelli Industries Due to the amazing success of Spank Industries’ Oohbah Patented Rim Designs, and a desire to push the limits in the development of new material and process technologies, Spank Industries co-founder, Gavin Vos, has recently invested heavily into exclusive in-house rim and handlebar production factories, locally in Taiwan. Fratelli Industries is a state of the art, 1000 square meter facility specializing in the exclusive production of high end rims and spokes for the bicycle industry. Located in the Chang Hua area, outside of Taichung, Taiwan, Fratelli employs proprietary extrusion, cutting and hooping tooling and techniques, and works with exclusive new era alloys. By combining a unique level of attention to material spec and consistency with newly developed micro grain refinement mechanical production processes, Fratelli offers its partners a rare ability to achieve optimized weights, improved consistency, and increased rigidity. A vast experience base has been achieved by Fratelli’s founding partners, who together share decades of wheel building expertise, combined with some of Taiwan’s leading material and process experts in this field. A spoke program is also planned for the near future. With built in abilities to perform extensive material analysis, FEA simulation, in-house tooling design and sample assessment, and laboratory and real world testing, Fratelli has in a very short time taken Spank Industries’ wheel development program to new levels. In 2010, Spank introduced its new EVO line of rims to the bike world. Immediately Spank Industries realized from 5-15% reductions in weight across their range, along with up to 20% increases in stiffness and ultimate strength. Mike Dutton {Spank Brand Manager}”Spank Industries started business in 2003, primarily distributed to Germany and surrounding area. Since then we have increased distribution to global levels and recently opened a new sales office in the USA. Our objective has always been to offer cyclists in all disciplines the ultimate synergy of performance, light weight, and design. Although Spank Industries gained its early fame servicing the Freeride, Downhill and Dirtjump markets, recently Spank has extended its lines to offer some of the most competitive XC, Trail, and All Mountain components on Earth. More and more, weight consciousness has become a primary concern. The only way to push evolution at the pace that our industry demands, and to ensure the level of production consistency that is required to offer both light weight and cutting-edge performance, is to bring development in-house. Last year our investment into a handlebar development and production facility paid off in a huge way. This year we are ecstatic about the work we are doing on rims with partner Fratelli Industries, and the future that holds. Taking a look at the advancements we’ve made already on our new EVO rim series for 2010, there are no limits to what we can accomplish together!” Gavin Vos {Spank Co-Owner / Fratelli Co-Founder} – Fratelli Industries has afforded Spank the opportunity (as an opinion leading component upgrade brand), to partner in a manufacturing facility with a deep wealth of processing and materials knowledge. The result is an exclusive and technically advanced line of product. The primary focus of Fratelli is adding value through design, advanced process capabilities, and the application of exotic materials. Spank is now better able than ever before to provide its riders with performance enhancing components at competitive prices! Fratelli Ind. can be contacted at fratelli.ind@gmail.com.

GERMANY/AUSTRIA/BENELUX

AUSTRALIA

CANADA

Sports Nut GmbH

Red Hot Agencies

Norco Products Ltd – West

Bahnhofstr. 26, 72138 Kirchentellinsfurt Germany

12a Simpson St Moorabbin 3189 Australia

1465 Kebet Way Port Coquitlam, BC, V3C 6L3

Phone: +49-7121-1447740 Fax: +49-7121-1447740

Phone: 03 9555 6700 Fax: 03 9555 6722

Phone: (604) 552-2930 Toll Free Phone: 1-800-663-8916 Fax: 1-800-667-2699

Web: www.sports-nut.de Mail: contact@sports-nut.de

Web: www.norco.com Mail: info@norco.com

CANADA

CHINA

Norco Products Ltd – East

T2R-Distributors Ltd

Hang Zhou Rui Fei Tech. Ltd.

321 Hanlan Road Woodbridge, ON, L4L 3R7

PO Box 1154 Whistler, BC, V0N 1B0

Room 1206, Xue Feng Mansion, #346 Qing Tai Street, Hang Zhou, China

Phone: (905) 851-1133 Toll Free Phone: 1-800-263-2344 Fax: 1-800-667-2644

Phone: 1 604 902 5335

Phone: +86-571-85135488 Fax: +86-571-87025987

Web: www.t2r-distributors.com Mail: Peter@t2r-distributors.com Mail: Dan@t2r-distributors.com

Web: www.rflead.com

Web: www.norco.com Mail: info@norco.com

CZECH REPUBLIC

DENMARK

FINLAND

Shaman Racing

222 Cycles

Active Bike-tre

U zámku 218, Dobřejovice, 251 01, Czech Republic

skolebakken 7 Vrinners 8420 Knebel Denmark

Teiskontie 18 33540 Tampere

Web: www.shamanracing.com Mail: joza@shamanracing.com

Phone: +45 8752 2221 Web: www222cycles.dk Mail: wichmann@222cycles.dk

Web: www.activebike.biz

FINLAND

FRANCE

GREECE

MTB Centre

B.S. Trading sarl

LOW AND FLOW Bike Shop

Tatu Suonpää, Kamajankuja 5 A 4, 36240, Kangasala

6, Rue de Houssen, 68000 COLMAR, France

19-21 Erithreas str., Vironas Athens, GREECE 162 31

Phone: +358 50 4333 163

Phone: +33 (0) 3 89 73 60 32

Phone: +30 211 4070259

Mail: tatu@mtbcentre.fi

Web: www.bstrading.net

Mail: info@lowandflow.gr Web: www.lowandflow.gr

HONG KONG

HUNGARY

ISRAEL

Gravity reaction cycles Co.

BEMP Kereskedelmi és Szolgáltató Kft.

Slalom Bikes Ltd.

G/F, 43 Tai Nan street, Sham Shui Po, Kowloon, Hong Kong

Oz Köz 53., 11./3. 4400 Nyíregyháza

VAT #513176206 105 Hachashmonaim St. P/O/Box 20521 Tel Aviv 61200 ISRAEL

Fax: +420 261 214 552

Phone: +420 602 219 883

Phone: +852 2381 2289 Fax: +852 2381 2289 Mail: gravityreactioncycles@gmail.com

Web: www.bemp.hu

Phone: +972 3 561 9106 Fax: +972 3 624 2742 Web: www.slalom.co.il Mail: ifattal@zahav.net.il

ITALY

JAPAN

KOREA

Sales Office

FunFancy Co., Ltd

IMT Technology Co., Ltd.

Tommaso Silvio D'Orazio Phone: +39 393 901 350 8 Mail: tommaso@lifetrails.it

3-30 Kitazono, Itami-city, Hyogo, ZIP 664-0891, Japan (株)ファンファンシー〒664-0891 兵庫県伊丹市北園3-30

Samwon B/D 4F, 52-2 Wonhyoro-3Ga, Yongsan-Ku, Seoul, Korea

Distribution

Phone: +82-2-711-9333 Fax: +82-2-711-9095

Sports Nut GmbH Bahnhofstr. 26, 72138 Kirchentellinsfurt Germany Phone: +49-7121-1447740 Fax: +49-7121-1447740 Web: www.sports-nut.de Mail: contact@sports-nut.de

Phone: +81 (0)72 785 9525 Fax: +81 (0)72 785 9527

MALAYSIA / INDONESIA

MEXICO

NORWAY

Time Trading Services

Zonabike

Brown Couch AS

No. 30, Jalan Raja Udang 14 Taman Pantai Sepang Putra 43950 Sg Pelek, Sepang Selangor DE. Malaysia

Atzayacatl #149 Adolfo Ruiz Cortines Coyoacan, Mexico D.F.04630

Ola Valdris v 10B 1357 Bekkestua Norway

Web: www.imtmall.co.kr Mail: jwyou@imt-tech.co.kr

Web: www.funfancy.jp Mail: shop-info@funfancy.jp

Phone: +554 1260 250 Fax: +555 6036 788

Phone: +6012 339 2488

Phone: +47 67 58 17 01 Fax: +47 67 58 17 02

Mail: Mike66gravity@yahoo.com

Web: www.browncouch.no

NEW ZEALAND

PHILIPPINES

POLAND

Access Cycles

MT Pro Bikes

7ANNA sp. z o.o. sp. k.

19 memorial park ave, Haumoana, Hawkes bay, NZ 4102

4074 General Mascardo St. Bangkal Makati City, Philippines 1233

Raciborskiego 123 80-215 Gdansk, POLAND

Mobile: +64 21 515598

Phone/Fax: +63 2 843 1594 Mobile: +63 917-5611387

Phone: +48 58 520 18 04 Fax: +48 58 340 47 17

Mail: mtprobikes@gmail.com

Web: www.7anna.com.pl

PORTUGAL

RUSSIA

SINGAPORE

MarcMTB Products, Lda

Teammano Co

L&T CYCLE PTE LTD

Estrada Nacional 356, Campos 2405-009 Maceira-Lis Portugal

GSK Severniy 18 Signalniy proezd, Moscow, Russia

Blk 482, #01-230, Tampines Street 43. Singapore 520482

Mail: eddie@accesscycles.co.nz

Phone: +351 (0) 917 151 890

Phone: +8 916 243-1170

Web: www.marcduarte.com

Phone: +65 6786 3313 Fax: +65 6786 6650 Mail: ask@ltcycle.com

SOUTH AFICA

SPAIN

SWEDEN

Rush Sports (PTY) LTD

Melic Bikes

Active8 Distribution

Postnet suite 8 Private bag X 6 Cascades 3202 Pietermaritzburg South Afica

Passeig de l'estacio n 5 4-5 43800, Valls, Tarragona

Södra Grev Rosengatan 1/CV/Hus 16 703 62 ÖREBRO, Sweden

Phone: +34 977 613 458 Mobile: 661366783 - 661366784

Phone: +46 (0)19 24 02 75

Phone: +27 333 462 300 Fax: +27 333 461 196 Web: www.rushsports.co.za

Web: www.melicbikes.com Mail: melicbikes@gmail.com

Web: www.active8sport.com Web: www.www.rite.se

SWITZERLAND

USA

PFRUNDMATTE 3 CH-6210 SURSEE SWITZERLAND

Unit 17 The Loan Viewforthbank Industrial Estate South Queensferry, EH30 9SD, UK

1216 Mercantile Road, Santa Fe, NM, 87507 USA

intercycle

Phone: +41 41 926 65 11 Fax: +41 41 926 63 52

Hotlines Europe Ltd

Bicycle Techinologies International Ltd.

Phone: +44 131 319 1444

Phone: 505 473 1010 Fax: 505 473 0011

Web: www.intercycle.com Mail: info@intercycle.com

Web: www.hotlines-uk.com Mail: info@hotlines-uk.com

Web: www.bti-usa.com Mail: info@bti-usa.com

USA

6400 W. 105th Street Bloomington, MN 55438 USA

Washington Headquarters 7620 S. 192nd Street Kent, WA 98032

Quality Bicycle Products

Phone: 1-800-346-0004 Fax: 1-800-346-0211 Web: www.qbp.com Mail: sales@qbp.com

Seattle Bike Supply

Phone: 1-800-283-2453 Fax: 1-800-955-2453 Web: wwww.seattlebikesupply.com Mail: sales@seattlebikesupply.com

29"/700c

30AL EVO

Subrosa

26"

30AL EVO

Subrosa

29"/700c

EVO

Oozy 26AL

EVO 26"

Oozy 26AL

29"/700c

23AL EVO

Vomax

26"

23AL EVO

Vomax

MODEL

Image

80.00

75.00

80.00

75.00

95.00

90.00

MSRP USD

64.90

59.90

64.90

59.90

84.00

79.00

MSRP EURO

32H / 28H

598 mm 32H / 28H

537.5 mm

ERD

Hole Config.

Trail / All Mountain / Freeride / Fixie

Trail / All Mountain / Freeride

589 mm

529 mm

32H

XC / Trail / All Mountain / 597 mm 32H / 28H Fixie

XC / Trail / All 537 mm 32H / 28H Mountain

XC Race / Trail / Fixie

XC Race / Trail

Intended Discipline

MGR Super-6 Alloy

MGR Dynamal Alloy

RIM MATERIAL

Joint Type

Inner / Outer Width Colors

FEATURES

610 - 625 g Sleeved

520 - 535 g Sleeved

485 - 500 g Sleeved

420 - 430 g Sleeved

30 / 24.5 mm

27 / 21 mm

26 / 21 mm

Black / White / Red / Blue

Highly Optimized Oohbah Patented Profile, Double Beadnip, Improved Ductility/Toughness/Strength, Disc Specific, Polished-Anodized or Coated (White) finish, High Speed / Low Tire Spread/Rolling Resistance Highly Optimized Oohbah Patented Profile, Double Beadnip, Improved Black / Ductility/Toughness/Strength, Disc Specific, White Polished-Anodized or Coated (White) finish, High Speed / Low Tire Spread/Rolling Resistance Black / Optimized Oohbah Patented Profile, Double White / Ti- Beadnip, Improved Grey / Ductility/Toughness/Strength, Disc Specific, Green / Polished Anodized or Coated (white/green) Royala finish, Moderate to High Traction and Gold Speed Optimized Oohbah Patented Profile, Double Black / Beadnip, Improved White / Ti- Ductility/Toughness/Strength, Disc Specific, Grey / Polished Anodized or Coated (white/green) Green finish, Moderate to High Traction and Speed

Ultra-light Oohbah Patented Profile, Double Black / Beadnip, Flashweld technology, Micro Flash 23 / 18.5 425 - 435 g White / Grain Refinement, Improved Welded mm Pol. Silver Ductility/Toughness/Strength, Disc Specific, Polished-Anodized or Coated (white) finish, Extreme Strength to Weight Ratio

Ultra-light Oohbah Patented Profile, Double Black / Beadnip, Flashweld technology, Micro Flash 23 / 18.5 345 - 355 g White / Grain Refinement, Improved Welded mm Pol. Silver Ductility/Toughness/Strength, Disc Specific, Polished-Anodized or Coated (white) finish, Extreme Strength to Weight Ratio

WEIGHT (ano / coated)

Spank Industries Rims

EVO

Stiffy 40AL

Spoon 32AL

EVO

Spike 35AL

Race28 EVO

Spike

Tweet28

80.00

60.00

80.00

55.00

69.90

49.90

69.90

44.90

Extreme 530 mm Freeride / DH 32H

32H

DH / FR / DJ / Slope / All 530 mm Mountain

32H

531.8 mm

DH / Freeride / All Mountain / Aggressive Trail

32H

DH / Freeride 530 mm / All Mountain

530 mm

DJ / Street / FR

MGR Super-6 Alloy

6-Series Alloy

MGR Dynamal Alloy

6-series Alloy

680-700 g

620 g

590-605 g

500 g

550 g

Black / Red / Blue / Green

Oohbah Patented Profile, Double Beadnip, Improved Ductility/Toughness/Strength, Disc Specific, High Polish-Anodized or Coated (White) finish, High Tire Spread/Traction

Oohbah Patented Profile, Reduced Width and Weight, Double Beadnip, Disc Specific, Brushed-Deep Anodized Finish, High Speed / Low Tire Spread/Rolling Resistance Highly Optimized Oohbah Patented Profile, Reduced Width and Weight, Double Beadnip, Disc Specific, Satin-Peened Anodized Finish, High Speed / Low Tire Spread/Rolling Resistance

Sleeved

34.3 / 40 mm

Black / White / Green

Oohbah Patented Extreme Freeride Profile, Double Beadnip, Improved Ductility/Toughness/Strength, Disc Specific, Polished Anodized or Coated (white/green) finish, Maximum Tire-Spread/Traction

Black / 32 / 26.7 Red / Pinned mm Blue / Ti- Oohbah Patented Profile, Double Beadnip, Grey Disc Specific, Satin Peened-Anodized Finish, High Tire Spread/Traction

Black / White / 35 / 29.5 Sleeved Red / mm Blue / Pol. Silver

28 / 22.6 Sleeved mm

Black / Red / 28 / 22.9 Pinned Blue / mm Purple / Orange

150mm

Gravity -

Spoon 32

135mm

Gravity -

Spoon 32

150mm

Race28 -

Spike

135mm

Race28 -

Spike

Model

Image

399.00

499.00

MSRP USD

329.00

399.00

MSRP EURO

DH / FR / DJ / Slope / All Mountain 2400 g

2350 g

2000g

DH / Freeride / All Mountain / Aggressive Trail

DH / FR / DJ / Slope / All Mountain

1960 g

Weight

Spokes

Nipples

3 cross

Sandvik T302 Straight Brass (Black Gauge 2.0 Plated)

Spoon 32AL 32H

3 cross

Lace Pattern

Spike Sandvik Race28 T302 Triple EVO Butted Alloy 32H 2.2/1.8/2.0 (Anodized)

Rim

Blue/Blue, Blk/Blk, Red/Red, Orange

Blk/White, Blk/Red, Blk/Blue,

Colors

Spank Industries Wheelsets

DH / Freeride / All Mountain / Aggressive Trail

Intended Discipline

Spoon 32mm outer / 26.7mm inner width rim, Color coded hubs/rims, Japanese bearing upgrade rear, satin peened finish, 12mm thru x 150mm rear, 20mm thru x 110mm front

Spoon 32mm outer / 26.7mm inner width rim, Color coded hubs/rims, Japanese bearing upgrade rear, satin peened finish, 12mm thru x 135mm rear, 20mm thru x 110mm front

NEW 28mm outer/21mm inner 500g Spike Race28 EVO Rim, Color Coded Hubs/logos/spokes/nipples, Triple butted spokes, alloy nipples, satin-peened finish (durable/beautiful), Japanese bearing upgrade rear, 12mm thru x 150mm rear, 20mm thru x 110mm front

Features

189.00

18.00 18.00

12.90

29.90

TBA

26.90

142mm Rear Hub Adapter Kits

157mm Rear Hub Adapter Kits

10mm Thru Axle Rear Hub Conversion Kit 35.90

TBA

39.90

11.90

18.90

MSRP USD

9.90

15.90

MSRP EURO

Fratelli Tubeless Tape 9mm QR Front Hub Adapter Cups 15mm Thru Front Hub Adapter Cups

35mm Tubeless Valves

image

159.00

Spoon-150 Rear

model

159.00

Spoon-135 Rear

89.90

MSRP USD Weight

230 g

350 g

370 g

Intended Discipline

DH / FR / AM / Trail

DH / FR / AM / Trail 150 mm

135 mm

110 mm

OLD

32H

Hole Config.

Avail. Adapters

9-Speed, 12mm thru axle type, includes standard 9mm QR adapter kit, 6 bolt disc mount, 25 engagement points, 3 pawl, CNC optimized body and freehub body, Japanese 157mm OLD bearing upgrade, adapter kit

Alloy Hub Body, SuperLite Machined Steel Freehub Body, Alloy Internal Hub Axle

Converts Spoon-135 Rear Hubs to 10mm thru axle type, Cup and Alloy Internal Hub Axle

Converts Spoon-150 Rear Hubs to 157mm standard OLD, Cups and Steel Internal Hub Axle

Convert Spoon-135 Rear Hubs to 142mm standard OLD, Cups and Alloy Internal Hub Axle

Converts Spoon-20 front hubs for use with 15mm thru axle/QR forks

Converts Spoon-20 front hubs for standard 9mm QR forks

25mm width, Advanced Polymer Ultralite Tubeless Conversion Tape, also suitable for use as ultralite rim tape for any rim, Adequate for one wheelset 26"/29"/700c, works with all Spank EVO Rims

2 pcs per set, Presta Valve (F/V) specific, perfect for use with Vomax or Oozy rims, removable valve core for sealant injection, molded rubber seal base

Features

142mm OLD adapter kit / 10mm Thru Axle adapter kit

9-Speed, 12mm thru axle type, includes standard 9mm QR adapter kit, 6 bolt disc mount, 25 engagement points, 3 pawl, CNC optimized body and freehub body, Japanese bearing upgrade,

20 mm thru axle type, CNC optimized, 6 bolt 9mm QR / 15mm disc mount Thru/QR

Features

Alloy Hub Body, SuperLite Machined Steel Freehub Body, Alloy Internal Hub Axle

Alloy Hub Body and Cups

Materials

Spank Industries Hubs

Spank Industries Wheel Accessories

69.00

Image

Spoon-20 Front

Model

MSRP EURO

75.50

45.90

54.00

55.00

75.50

Spike 777 EVO

Subrosa 747

Spoon 740

Loungebar

Royala Bar

Tweet 720

Bitchstick

87.00

65.50

Image

Oozy

Oozy Limited Edition

Model

MSRP USD

69.00

49.00

39.90

69.00

60.00

79.00

MSRP EURO

25.4

31.8 / 25.4

4° up / 8° Super-6 777 mm back alloy

4° up / 8° Super-6 747 mm back alloy

5° up / 6-series 740 mm 8.5° back alloy

5° up / 8° 6-series 720 mm back alloy

Zirconium 5° up / 8° Doped 7700 mm back series alloy

DH / FR / All Mountain / 5 / 15 / 30 / Aggressive Trail 50 mm 280 - 320 g

DH / FR / All Mountain / 5 / 15 / 30 Aggressive Trail mm 280 - 300 g

DH / FR / All Mountain / DJ / 5 / 20 / 40 Slope mm 340 - 360 g

DH / FR / All Mountain / DJ / 5 / 20 / 40 Slope mm 330 - 360 g

30 / 50 / 70 mm 455 - 500 g

30 / 50 mm 325 - 350 g

DJ / Slope / Park / Fixie

FR / Big Hit / DJ / Slope

31.8

Clamp Dia.

4° up / 6° 6-series 700 mm back alloy

Length

Up Sweep / Back Sweep Material

Aggressive XC / Trail / All 5 / 15 / 30 Mountain mm 280 - 290 g

Weight (depends on rise)

XC Race / Trail / All Mountain 5 / 15 mm 208 - 220 g

Rises Offered

Zirconium 4° up / 6° Doped 7700 mm back series alloy

Intended Disciplines

Spank Industries Handlebars

Extreme Gradual Taper Profile (XGT), FEA Optimized, Trued Cylindrical Stem Clamp Zone

MGR processed alloy, Dual Extreme Gradual Taper Profile (Dual XGT) with Impact Ends, 3D CNC Bending, FEA Optimized, Trued Cylindrical Stem Clamp Zone

Extreme Gradual Taper Profile (XGT), FEA Optimized, Trued Cylindrical Stem Clamp Zone

MGR processed alloy, Dual Extreme Gradual Taper Profile (Dual XGT) with Impact Ends, 3D CNC Bending, FEA Optimized, Trued Cylindrical Stem Clamp Zone

Features

black

Extreme Gradual Taper Profile (XGT), FEA Optimized, Trued Cylindrical Stem Clamp Zone

black / white / red / blue / Extreme Gradual Taper Profile (XGT), FEA purple / orange Optimized, Trued Cylindrical Stem Clamp Zone

gold

white

black / red / blue / ti-grey / New Orange

black / white / ti-grey

black / white / red / blue / pol.silver

black / white

Colors

Saddle

Starblast

Air Saddle

Share the

Saddle

Subrosa

MODEL

Image

54.90

43.90

54.90

MSRP USD

39.90

49.90

MSRP EURO Materials

Synthetic

Kevlar / Synthetic

DH / FR / All Kevlar / Mountain Synthetic

DJ / Street / Park

DH / FR / All Mountain / Aggressive Kevlar / Trail Synthetic

Intended Discipline

CroMo

Rails

350 g

Weight

Back/Grey

Black/White, Blue/Black

430 g

405 g

Blk/Wht, Wht/Gry, Blu/Blk, Red/Blk 350 g

Chocolate/Gold, White/Grey, Black/Black

COLORS

Spank Industries Saddles

Fully Kevlar Reinforced, Nonslip cover, 8mm Rails, 42mm rail width (30mm adj.), 270mm Length

9mm O.S. Rails, Embossed and Embroidered logos, Nonslip cover, 225mm Length, 2 versions available

Kevlar reinforced, Embossed Crest, Non-slip Cover, 8mm Rails, 42mm rail width (30mm adj.), 245mm Length, 4 versions available

Kevlar reinforced, Embossed Crest, 8mm Rails, 42mm rail width (30mm adj.), 275mm Length, 3 versions available

FEATURES

1-Timer

Not 1.5 Timer

2-Timer

Royala Timer

Spoon

Director

"The Standard"

NEW Spike

Oozy

Edition

Oozy Limited

Model

Image

54.00

42.90

44.90

71.50

76.00

44.90

69.90

79.50

109.50

MSRP USD

49.00

39.90

65.00

69.00

39.90

59.90

69.00

99.00

MSRP EURO

195 g

205 g

240 g

DH / FR / All Mountain / DJ / Slope DH / FR / All Mountain / DJ / Slope DH / FR / All Mountain / DJ / Slope DH / FR / All Mountain / DJ / Slope

170 g

180 g

DH / FR / All Mountain / DJ / Slope

DJ / Slope / Park / Fixie

150 g

DH / FR

50 mm

40 mm

50 mm

35 / 50 mm

135 / 155 g

DH / FR / All Mountain / Aggressive Trail / DJ

50 / 60 / 70 / 80 mm

Lengths

51 / 60 / 70 / 80 mm

125 - 150 g

Weight (depends on length)

Aggressive XC / Trail / All Mountain 160 - 175 g

XC Race / Trail / All Mountain

Intended Discipline

0°

10°

0°

5°

Rise

6-series alloy

7075 alloy

6-series alloy

Zirconium Doped 7series alloy

Material

Colors

2D forge / CNC optimized, negative rise dropped barclamp, chamfered clamping zones, polish finish, with top-cap

2D forge / CNC optimized, 35mm stack height, 55mm wide barclamp, chamfered clamping zones, CNC logo, polish finish, with top-cap

3D forge/CNC construction, Stainless Hardware, 8mm High Torque Sex Bolt, 40mm stack, chamfered clamp zones, with polished topcap, CNC logo

3D forge / CNC highly optimized construction, Titanium Hardware, 8mm High Torque Sex Bolt, 40mm stack, chamfered clamp zones, with polished top-cap, CNC logo

Features

2D forge / CNC optimized, 37mm stack height, chamfered clamping zones, peened-anodized finish

2D forge / CNC optimized, 37mm stack height, chamfered clamping zones, painted finish

2D forge / CNC optimized, 37mm stack height, chamfered clamping zones, peened-anodized finish, CNC logo

2D forge / CNC optimized, 37mm stack height, chamfered clamping zones, polish-anodized finish, CNC logo

black / white / red / blue / purple / 2D forge / CNC optimized, 38mm stack height, chamfered clamping 25.4 mm orange zones, brushed-deep anodized finish

25.4 / 31.8 mm black

31.8 mm white

25.4 / 31.8 mm black

31.8 mm pol. Gold

black / red / blue / ti-grey / 2D forge / CNC optimized, 40mm stack height, chamfered clamping 31.8 mm New Orange zones, polish finish, with top-cap

black / red / 31.8 mm blue / white

black / red / 31.8 mm blue / green

31.8 mm black / white

Clamp Dia.

Spank Industries Stems

Image

TBA

Replacement Bushing Kit

Replacement Bearing Kit

Replacement Quad Ring Pack

Complete Pedal Rebuild Kit (w Axle)

TBA

MSRP EURO

MSRP USD

TBA

109.00

125.00

MSRP USD

Replacement Pin Kit

Pedal Accessories

Spike Flat Pedal

Model

Platform Size

Pins

18pcs M4*9mm 2pcs M4*18mm

Contents

Alloy Body / Scandium Enriched Steel Axle

Material

Bearings

IGUS bushing outboard / Oversize sealed bearing inboard

M4x9mmx32pcs / M4x18mmx4pcs

400g (per pair) 90+ cmÂ˛

Weight

Black, Blue, Red, Ti-Grey, Orange

Colors

Axle (L&R) x1set / Bearing x2pcs / IGUS bushing x2pcs / Quad ring x2pcs / Dust cap x2pcs / Axle Bolt x2pcs / stainless washer x2pcs / Allen Tool 5mm x1pcs

Quad ring x50pcs

Full Compliment Sealed Bearing x2pcs / Friction seal (R+L) / Custom 5mm Allen Tool x1

IGUS bushing x2pcs / Dust cap x2pcs / Quad ring x2pcs / stainless washer x2pcs / Custom 5mm Allen Tool x 1pcs

All Disciplines

Intended Discipline

Spank Industries Pedals MSRP EURO

PUFF

Spoon One2One

MODEL

Image

329.00

449.00

495.00

399.00

MSRP EURO

350.00

439.00

MSRP USD

2.40 kg

4X / DS / Trail

Powder White-Gold Trim / Powder M/L (one White-Silver size) Trim 7005 Alloy

WEIGHT

2.48 kg

MATERIAL

Black on DJ / Street / Black / Toxic Park / M/L (one Wasabi Slopestyle size) Green 4130 Steel

COLORS

2.48 kg

SIZES

Magic Black / Aqua Blue / Apple Red / DJ / Street / Eggplant Park / M/L (one Purple / Slopestyle size) Chrome 4130 Steel

Intended Discipline

Spank Industries Frames

4X Balanced Geometry, oversize Custom 3D formed tube-set, ISCG mount, CNC gussets and dropouts, Replaceable Mech Hanger, 30.4 seatpost std. / 34.9 clamp std.

Newly Refined Dirt Jump Geometry, Custom forgedoptimized dropouts, Curved Tubular bridges, Powder Coat finish, 72mm Threaded BB-shell, Rear Disc Mount, 27.2 post std. / 29.8 clamp std.

Newly Refined Dirt Jump Geometry, Custom forgedoptimized dropouts, CNC gussets/bridges, ECO-Coat finish, 72mm Threaded BB-shell, Rear Disc Mount, 27.2 seatpost std. / 29.8 clamp std.

FEATURES

XXX

10.90

Spank Lock-On Grips (Plastic Cap)

Lock-On ShopBox (25prs/4colors)

TuggJob Grips

MSRP USD

22.50

Image

Spank Lock-On Grips (Alloy Cap)

Model

9.90

XXX

19.90

MSRP EURO Length

120 g

DJ / Slope / Fixie 145mm

100 g

110 g

Weight

All Disciplines 130mm

Intended Discipline

Tacky Rubber, Low Profile, Polished Alloy Caps, Two Laser Etch Logos

Features

Tacky Rubber, Low Profile, Polished Locking Rings (2), Laser Etch Logo 5 Amazing Scents, Super Tacky Kryton Rubber, Ultra Thin Profile, Tie Down Grooves, Stainless Hardware, 50mm Flange

Tacky Rubber, Low Profile, Blk/Blk, Blk/Red, Polished Locking Rings (2), Wht/Blue, Wht/Sil. Laser Etch Logo

Black/Black, White/Silver, Chocolate/Gold

Colors

Blk/Blk, Blk/Red, Wht/Blue, Wht/Sil. Magic Black, Apple Red, Berry 4mm Hex Blue, Vanilla Expander End White, Grape Caps Purple

3mm Hex Lock Clamp x 2 / Plastic End Cap 3mm Hex Lock Clamp x 2 / Plastic End Cap

3mm Hex Lock Clamp / 2mm Hex Alloy Cap

Hardware

Spank Industries Grips

32.90

6.50

10.90

Tweet Singlespeed Sprocket

Tweet Headset Spacer Kit

Tweet Seat Clamps

MSRP USD

53.90

Image

Tweet 1/2 Link Chain

Model

9.90

4.90

29.90

49.00

MSRP EURO

All Disciplines

DJ / Slope / Fixie

Intended Discipline

from 55g, 25T / 28T / 30T / 32T sizes available, 'Brushed-Deep Anodized finish, Singlespeed specific

3/6/12 mm spacers incl. in each kit, Brushed-Deep Anodized Finish, Laser Logo

29.8mm dia (for 27.2 seatpost) , 4mm Hex Hardware , 25g , Brushed-Deep Anodized Finish

Black, Silver, Blue, Purple, 6-series Red, Orange, Alloy White Black, Silver, Blue, Purple, 6-series Red, Orange, Alloy White

7075 Alloy

Alloy Steel Black, Silver, Blue, Purple, Red, Orange, White

Features

Singlespeed, 1/2 Link, Offset, 1200+kg test rating, 395 g, 102 link, 1/2" x 1/8"

Colors

Black, Silver, Blue, Purple, Red, Orange

Material

Spank Industries Accessories