CUFFED CHRISTMAS STOCKING
PG 2/11
CUFFED CHRISTMAS STOCKING FINISHED SIZE: 25 x 43cm MATERIALS: • LIBERTY Fabrics - A Woodland Christmas GOLD STOCKING Forest Star 04776020A
• one piece 10” x 4” Evergreen Glade 04776021A • two pieces 10” x 17” for the
FRONT and BACK Enchanted Forest - Gold Metallic 04776019B
NOTE: Stitch with ¼” seam allowance unless stated otherwise. Take 10” x 17”rectangle for the stocking FRONT. Measure 5” from the top and cut out cut 3½” strip. Use this off cut to trace initial. Take 10” x 4” strip from corresponding fabric and stitch it to the FRONT’s strips.
5”
3½”
10 x 4”
• one piece 18 x 4 ½“ for the cuff Winter Pine 04776025A • two piece 10” x 17” for lining
SILVER STOCKING Forest Star 04776020B
• one piece 10” x 17” for the FRONT Woodland Wonderland - Cool with Silver Metallic 04776017B • one piece 10” x 4” Christmas Charm with Silver Metallic 04776026B
• one piece 10” x 17” for the BACK
Sandwich lining fabric right side facing down, cotton batting and outside fabric right side facing up. Quilt together in stitching pattern of your choice. Use walking foot on your sewing machine for stitching. Quilt stocking BACK, batting and lining piece in the same manner. Print patterns from page 4-7 and tape pieces together. Stack the two quilted pieces on top of each other, right sides together. Place pattern on top and stitch along th edge of the pattern. Cut excess fabric approximately 5 mm from the stitch line. Clip curves where necessary. Zig zag around the edges if desired. Turn inside out.
Enchanted Forest - Silver Metallic 04776019D • one piece 18 x 4 ½“ for the cuff Frost Berry - Cool LF4776023B • two piece 11” x 18” for lining
• •
Bosal Sew-in Batting- B27147 2 pieces 10” x 17” for each stocking Gold & silver ribbon
The fabric requirements is for making stockings as shown in the photograph. Before cutting review the placement of colours in case you want to make you own choices.
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
PG 3/11
CUFFED CHRISTMAS STOCKING CUFF Print the initial’s outline provided on pages 8 - 11. Cut out the letter from corresponding fabric. Take cuff’s fabric piece and silver or gold ribbon. Fold ribbon in half and stitch it onto cuff’s edge. Fold cuff’s piece in four to mark position for the intial. Stitch initial in place with zip zag stitch. Cut 6” of ribbon for the hanging loop. Fold it in half and pin to the seam line on the inside of the stocking. Lay cuff’s piece along the edge of the stocking with right side of the cuff facing the lining. Sew along the edge. Pull hanging ribbon up and sew small Back stitch over the seam line to secure it in place. Repeat process for the silver stocking.
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
PG 4/11
CUFFED CHRISTMAS STOCKING
STOCKING TEMPLATE A
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
PG 5/11
CUFFED CHRISTMAS STOCKING
STOCKING TEMPLATE B
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
PG 6/11
CUFFED CHRISTMAS STOCKING
STOCKING TEMPLATE C
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
PG 7/11
CUFFED CHRISTMAS STOCKING
STOCKING TEMPLATE D
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
AB CD EF
CUFFED CHRISTMAS STOCKING Initial’s outlines
PG8/11
GH IJK LM
NO PQ RSZ
TU VY WX