FLOWER SHOW COASTAL WALK QUILT
PG 2/3
FLOWER SHOW COASTAL WALK LAMPSHADES MATERIALS: • Flower Show Coastla Walk Collection by LIBERTY
ARLEY PARK 01666472A
FORGET ME NOT BLOSSOM 01666466A
CHILTERN HILL 01666476A
WILDFLOWER HAMPTON SPRING FIELD 01666474A 01666470A
• •
MAMIE FLOWER 01666475A
AVA MAY 01666473A
ARLEY BLOSSOM 01666478A
Lampshades Hot glue gun
STEP 1 Measure the perimeter of the lamp and the height. We used small lampshade from IKEA. Any lampshade will suit this project. In our case the height is 6” and the perimeter is 24” 24” x 2.5 = 60” 60 “ divided by 3 types of fabrics = 20” per fabric panel. We used following combinations: • ARLEY PARK, FORGET ME NOT BLOSSOM and MAMIE FLOWER with AVA MAY for edging •
CHILTERN HILL, WILDFLOWER and HAMPTON SPRING with ARLEY BLOSSOM and AVA MAY for edging.
Cut three pieces 20” x 6” in our case. Use your measurements and colour combination of your choice for cutting. STEP 2 Mark 3/4” marks along the long edge of the fabric pieces. Start folding the pleats and stitch ¼” from the edge of the fabric. When you get to the end of one fabric piece, insert next fabric into the pleat. We didn’t stitch panels together to avoid the bulk of the seams. STEP 3 Cut 2” bias strip from AVA MAY fabric. Wrap it around top and bottom perimeters of the lamp, measure and cut with diagonal seams allowance. Stitch ends together. The fabric requirements is for making the lampshades as shown in the photograph. Before cutting review the placement of colours in case you want to make you own choices. © BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.
PG 3/3
FLOWER SHOW COASTAL WALK LAMPSHADES STEP 4 Take the longest edging, press in half and stitch it along the pleated edge. Folding ends of the fabrics inside of the pleat.
STEP 5 Fold edging over the bottom of the lampshade and secure with some clips. Start folding pleats around top of the lampshade and pin them as you go. Stitch top bias edging to hold all these pleats together.
STEP 6 Secure lampshade cover in place with clips. Fold edging over and hot glue it in place.
© BIRCH CREATIVE, 2022. For personal use only. Pattern not for resale. Items made using this pattern must not be resold.