OIL PULSE TOOLS & TORQUE MEASUREMENT EQUIPMENT
2 3 4 5 6 7 8 9 14 19 21 22 26 27 28 32 33 35 37
READING GUIDE PATENT DIAGRAMMATIC FEATURES OF OIL PULSE TOOL TIGHTENING CONCEPT-TORQUE AND FRICTION APPLICATION OF OIL PULSE TOOL WHAT IS TORQUE? AIR OIL PULSE TOOL SHUT-OFF OIL PULSE TOOL NON SHUT-OFF OIL PULSE TOOL ANGLE TYPE SHUT-OFF / NON SHUT-OFF OIL PULSE TOOL ANGLE CONCAVE TYPE NON SHUT-OFF OIL PULSE TOOL GEARED HEAD TYPE NON SHUT-OFF OIL PULSE TOOL WITH CONVERSION OIL PULSE TOOL VS. IMPACT WRENCH IMPACT TOOL DIRECT DRIVE AIR SCREWDRIVER / AIR DRILL IMPACT WRENCHES GRINDERS DIGITAL TORQUE TESTER
READING GUIDE
RULES OF EDITTING ITEM OUT
Shut-off oil pulse tool
OUN
Non shut-off oil pulse tool
SD/SH
Impact wrench / screwdriver
RP
Direct Drive Air Screwdriver
IW
Impact wrench (Twin hammer mechanism)
AD
Air drill
CUT
Digital torque tester
For Example OIL PULSE TOOL
AIR IMPACT TOOL
OUT-331PD
SD-35SH
Anvil drive Pistol type Item model OUT-331SH Hex. drive Straight type
Hex. drive Straight type IW-2022PD AnviI drive Pistol type
OUN-60PAL Longer geared head Angle geared head OUN-50SR Geared head OUN-881SC/U Concave socket Angle type(90Ëš)
PATENT DIAGRAMMATICS THE FOLLOWING STRUCTURES OR TOOL HAVE BEEN PATENTED, PLEASE DO NOT BOOTLEG POINT CONTACT TYPE
DOUBLE-NEEDLE TYPE
(cylinder for use in a high-pressure tool)
(cylinder for use in a low-pressure tool)
The blades do not cause a resistance due to a great contact point when a torque of a large scal tool is raised. The point-contact type blade makes the torque more quickly and accurately raised.
According to the raising rate of the torque and the stability of the shut off model tool, the double - needle type blade can quickly reveal the in time accuracy whatever in a high-pressure or low-pressure condition.
HARD JOINT30º
SOFT JOINT 270º
Double-needle hydraulic blade
Torque
Point-contact hydraulic blade
Blade of point-contact type
TORQUE CAPACITY
Blade of double-needle type
Time
SHUT OF DEVICE 1.The rear unbalance device is integrated and the piston is inwardly actuated such that the air current is quickly exhausted to make the tool more sensitive. 2.The actuate shaft directly operate the rear unbalance device to make the tool more accurate.
MOVABLE SEALANT The sealant has a unique design that provides a seal effect due to the pressure value, wherein the seal effect and the pressure value are in direct proportion such that the sealant would not be hardened for been used for a period of time.
TWO-BACKFLOW MOTOR The two-backflow motor has two air inlets and four air outlets defined in bottom thereof for reducing the volume of the pneumatic tool and providing a comfortable operation.
TORQUE ADJUSTING DEVICE 高扭矩 Higher torque
低扭矩 Lower torque
The torque adjusting device is rotary for quickly fine turning and conveniently checking the output torque
DIGITAL TRANSDUCTION TORQUE TSETER The torque tester is disigned for hard joint of tightening torque, wherein the torque tester is prepared in factory or laboratory for quickly testing the torque of tools.
FEATURES OF OIL PULSE TOOL TWO BLADE IMPULSING UNIT Minimize the reaction generated by the stractural metal-to-metal contact because of short cycle of pulse. This innovation enables two-blades to more efficiently absorb impulsing power to deliver about 50% higher torque than single-blade mechanism and reduces vibration & sound. It reacts faster and more efficient while soft joint work.
Air
DOUBLE CYLINDER MOTOR HIGH EFFICIENCY MOTOR 1. 2. 3. 4. 5.
New disigned eco-saving air motor Specially coating on rotor blades Middle exhaust Smooth surface design Surplus exhaust
Specially coating on rotor blades
LOW OIL MIST With self-lubricating blades and cylinder, we reduce the problem of lubricating oil and oil mist.
Middle exhaust
Smooth surface design
Surplus exhaust
SILENCER ASSEMBLY We designed inner, rotating and silencer exhaust assembly to reduce sound pressure. Users and chose appropriate exhaust direction to reduce environmental pollution while working.
TWO STAGE TRIGGER This two-stage trigger allows users to start relievely, than reach the max. free speed later while doing fastening jobs.
R/L SWITCHER All items contain R/L switcher. users can reverse between right-rotating and left-rotating with just a switch.
HANDLE PROTECTOR Ergonomical designers handle protector can reduce vibration and discomfort while working.
TIGHTNEING CONCEPT-TORQUE AND FRICTION Factors of determining torque
TODAY most of industrial assembly line engineers are still looking for the efficient solutions-how to control the torque? The concept of torque controlling can be useful on reducing cost and quality control. Controlling torque is absolutely necessary for any assembly operation.
Screw, bolt The joint is hard or soft The type of tools
International Standardization century is coming, the traditional impact wrench is no longer to meet the customers’ requirement. How to choose the right tool is going to be the key point to increase your competitive power in the market.
The use of machine threaded screws in industrial assembly processes is most common method, because the tightening process is reversible, and can not damage the fasteners during disassemble and reassemble components. Fasteners that are insufficiently torque can vibrate loose, while excessive torque can damage that part.
Torque Force
Clamping Force Clamping Force
Tension Load
CLAMPING FORCE
The force holds the materials together
SPECIFICATION 1. Please identify the tools item no while ordering. 2. If you are not sure about the torque range, you can refer bolt diameter to choose suitable model (please refer torque rate table as following) 3. Torque range: The rate shown on the torque tester under standard testing environment. 4. Square drive or hex. size: Size and Shape of out-put axis. 5. The sleeve gear edge size. 6. Free speed: Rotating times per min. 7. Air pressure: Air pressure under working condition.
8. Length: Not included accessories like socket, bit and air connector. 9. Weight: Not included accessories like socket, bit and air connector. 10. Air inlet: Air inlet panel 11. Air hose: Please use recommended air hose diameter to prevent losing torque accuracy. 12. Air consumption: This rate is normally measured under 0.63 mpa, 6.3 bar, 90 psi. 13. Sound pressure: Sound pressure under working. 14. Bit size: Maximum bit diameter of suitable bits.
Recommended Torque Value Torque Bolt Valve Grade Thread
M2 M3 M4 M5 M6 M8 M10 M12 M14 M16
Recommended Torque Value
3.6
4.6
4.8
5.8
8.8
10.9
12.9
mm
4.6
4.8
5.8
8.8
10.9
12.9
0.10 0.35 0.81 0.60 2.80
0.13 0.46 1.10 2.20 3.70 8.9 17 30 48 74
0.17 0.61 1.40 2.95 4.90 10.5 21 36 58 88
0.22 0.77 1.80 3.60 6.10 15 29 51 80 123
0.35 1.20 2.90 5.70 9.80 24 47 81 128 197
0.49 1.70 4.00 8.10 14.0 33 65 114 181 277
0.58 2.10 4.90 9.70 17.0 40 79 136 217 333
M18 M20 M22 M24 M27 M30 M36 M42 M45 M48
103 144 194 249 360 492 855 1360 1690 2040
121 170 230 295 435 590 1030
172 240 324 416 600 819 1420 2270 2820 3400
275 385 518 665 961 1310 2280 3640 4510 5450
386 541 728 935 1350 1840 3210 5110 6340 7660
463 649 874 1120 1620 2210 3850 6140 7610 9190
● Recommended max tightening torque in Nm for untreated oil-smeared screws Friction coefficient μ=0.125, torque corresponds to approx.62% of tensile bolt stress
APPLICATION OF OIL PULSE TOOL NON SHUT-OFF vs SHUT-OFF Reasons for non shut-off model 1. Combination unit of simplex hard joint and screw. 2. A long extension, oversized socket or universal-type socket does not allow proper transmission feedback to a shut-off tool. 3. Combination unit of soft joint and screw. 4. Weight limited, require the smallest tool possible. 5. Accuracy and tolerance are required by combination unit, the accuracy of non shut-off tool is acceptable. 6. Lower cost than shut-off model.
Reasons for shut-off model : 1. Engineering specification require shut-off tools. 2. Wide variation in joint rates. 3. Minimizes operator training and influence.
HARD JOINT vs SOFT JOINT
TORQUE
Hard joint : When tightening torque is reached with a maximum rotation of 60 degree. Soft joint : When tightening torque is reached with a rotation of at least 360 degree. (about 1 rotation)
HARD JOINT
SOFT JOINT
ANGLE
Best effect with hard joint work
■ Hard joint
Please don't go beyond 360º while soft joint work, ottherwise the efficiency of tool may go worse. it is advised to enlarge the tool.
■ Soft joint
WHAT IS TORQUE WHAT IS TORQUE ? Basically, distance times force equals torque, or a turning or twisting force.Torque Unit: kg.cm, lb.in, N.m
DO YOU KNOW HOW MUCH TORQUE YOU ACTUALLY PUT ON THE FASTENER? AND HOW MUCH YOU LOSE WHILE YOU FASTENING?
SCREW/JOINT TYPE HARD JOINT
No prevailing torque. Applicability : Best Maintenance : Little
SOFT JOINT
Material:
What kind of screw will be used or fasten tool and size of fasten strength depends on material. Material of iron、 aluminum 、plastic and wood are in common use.
Friction:
A problem exists because friction has a large influence on how much torque is converted into preload. Besides the torque required to stretch the bolt, torque is also required to overcome friction in the threads and under the nut face. Typically, only 10% of the torque is used to stretch the bolt. Of the remaining torque, typically 40% is dissipated in the threads and 50% to under the bolt head. Because friction is such an important factor in the relationship between torque and preload, variations in friction have a significant influence on the bolt’s preload. Different bolt surface finishes generally have different friction values. The torque required for a socket headed screw will not be the same as that required for the same size hexagon bolt.
Friction under the bolt head
With prevailing torque Application : Good Maintenance:Increase maintenance cost than hard joint.
MACHINE SCREW Best
TRILOBULAR SCREW ( thread rolling /Thread forming) Good
(Self-tapping screw/ Self-drilling screw/ Wood screw) Poor
Clamping Force Friction in the threads
RECOMMEND
AIR OIL PULSE TOOL AIR OIL PULSE TOOL PISTOL TYPE
PAT. Inner controller valve can control torque precisely because of it's individual reliever
STRAIGHT TYPE
PAT. Special designed sealing can prevent oil-lacking in high pressure .
Straight type thimble can shut the tool of as soon as it reaches targeted torque.
R/L Switcher
Cozy and lighter handle provides operator more comfort and less tireness.
Colored handle distinguished different torque range
With universal connector with cotton. It reduces the sound pressure obviously.
CHOOSING YOUR OIL PULSE TOOL 1. When selecting the tool for fastening operation, it is necessary to consider bolt size, fastening torque, working condition and so on.(please enlarge your tool and notice the torque accuracy while using long socket) 2. It is not suitable to use shut-off tool together with long socket and universal socket. Otherwise it may lose torque accuracy.
Inner silencer assembly minimizes noise for more comfortable working environment
Hexagon wrench
HOW TO ADJUST TORQUE 1. Remove the Hex. bolt on the front cover with a hex. wrench. 2. Turn torque adjuster through the plug hole. 3. Turn clockwise to increase torque. Turn anticlockwise to reduce torque. 4. Re-tighten the Hex.-bolt.
Higher torque
Hexagon socket plug
Hexagon wrench
Lower torque
How to adjust torque
PISTOL TYPE SHUT-OFF OIL PULSE WRENCHES
OUT-441PD
OUT-331PD
OUT-771PD
OUT-661PD
OUT-551PD
O-RING PIN
PULSE TOOL SOCKET Please use pulse tool socket with the pulse tool, it can reduce vibration and stablize torque accuracy.
Fix socket with retainer and o-ring. use in situation that not change sockets often.
RETAINING PIN (OPTIONAL)
Use in situation that change sockets often.
OUT-991PD OUT-881PD
OUT-1301PD OUT-1001PD
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
Specifications Model No.
OUT-331PD OUT-441PD OUT-551PD OUT-661PD OUT-771PD OUT-881PD OUT-991PD OUT-1001PD OUT-1301PD
M4-M5
Torque Range Nm 4-8
M5-M6
5-14
3/8
0.5-0.6
5300
174
1
10mmx6.5mmx5M
0.4
M6
10-20
3/8
0.5-0.6
6500
178
1
10mmx6.5mmx5M
0.4
M8
15-30
3/8
0.5-0.6
6300
190
1.1
10mmx6.5mmx5M
0.43
M8-M10
22-52
3/8
0.5-0.6
6000
185
1.44
12mmx8mmx5M
0.45
M10
35-75
1/2
0.5-0.6
4700
209
1.8
17mmx10mmx5M
0.5
M10-M12
45-90
1/2
0.5-0.6
4200
203
2.1
17mmx10mmx5M
0.57
M12-M14
65-120
1/2
0.5-0.6
4200
205
2.2
17mmx10mmx5M
0.6
M12-M14
80-155
1/2
0.5-0.6
3000
235
2.7
17mmx10mmx5M
0.65
Bolt Capacity
Sq. Drive or Hex. Size inch 3/8
Working Pressure MPa 0.5-0.6
Free Speed rpm 4200
Length
Weight
Hose Size
mm 171
kg 0.99
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.35
10
PISTOL TYPE SHUT-OFF OIL PULSE SCREWDRIVERS
OUT-441PH
OUT-331PH
OUT-771PH
OUT-661PH OUT-551PH
PULSE TOOL BITS Please use pulse tool bit with the pulse tool, it can reduce vibration and stablize torque accuracy.
Specifications Model No.
OUT-331PH OUT-441PH OUT-551PH OUT-661PH OUT-771PH
M4-M5
Torque Range Nm 4-8
M5-M6
5-12
1/4
0.5-0.6
5300
174
1
10mmx6.5mmx5M
0.4
M6
8-18
1/4
0.5-0.6
6300
178
1
10mmx6.5mmx5M
0.4
M8
12-25
1/4
0.5-0.6
6000
191
1.1
10mmx6.5mmx5M
0.43
M8-M10
20-35
1/4
0.5-0.6
6000
186
1.44
12mmx8mmx5M
0.45
Bolt Capacity
Sq. Drive or Hex. Size inch 1/4
Working Pressure MPa 0.5-0.6
Free Speed rpm 4200
Length
Weight
Hose Size
mm 172
kg 1
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.35
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
11
STRAIGHT TYPE SHUT-OFF OIL PULSE WRENCHES
OUT-331SD
OUT-441SD
OUT-551SD
O-RING PIN
OUT-661SD
OUT-771SD
Fix socket with retainer and o-ring. Use in situation that not change sockets often.
OUT-881SD
RETAINING PIN (OPTIONAL)
Pulse tool socket Please use pulse tool socket with the pulse tool, it can reduce vibration and stablize torque accuracy.
Use in situation that change sockets often.
Specifications Model No.
OUT-331SD OUT-441SD OUT-551SD OUT-661SD OUT-771SD OUT-881SD
M4-M5
Torque Range Nm 4-8
M5-M6
5-14
3/8
0.5-0.6
5000
232
0.88
10mmx6.5mmx5M
0.4
M6
10-20
3/8
0.5-0.6
6300
233
0.98
10mmx6.5mmx5M
0.4
M8
15-30
3/8
0.5-0.6
5300
243
1
10mmx6.5mmx5M
0.43
M8-M10
22-52
3/8
0.5-0.6
6000
238
1.2
12mmx8mmx5M
0.45
M10
35-75
1/2
0.5-0.6
4700
262
1.6
17mmx10mmx5M
0.5
Bolt Capacity
Sq. Drive or Hex. Size inch 3/8
Working Pressure MPa 0.5-0.6
Free Speed rpm 4200
Length
Weight
Hose Size
mm 219
kg 0.88
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.35
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
12
STRAIGHT TYPE SHUT-OFF OIL PULSE SCREWDRIVERS
OUT-221SH
OUT-331SH
OUT-441SH
OUT-661SH
OUT-551SH
OUT-771SH
PULSE TOOL BITS Please use pulse tool bit with the pulse tool, it can reduce vibration and stablize torque accuracy.
Specifications Model No.
OUT-221SH OUT-331SH OUT-441SH OUT-551SH OUT-661SH OUT-771SH
M3-M4
Torque Range Nm 2-4
M4-M5
4-8
1/4
0.5-0.6
4200
224
0.89
10mmx6.5mmx5M
0.35
M5-M6
5-12
1/4
0.5-0.6
5000
237
0.89
10mmx6.5mmx5M
0.4
M6
8-18
1/4
0.5-0.6
6300
233
0.98
10mmx6.5mmx5M
0.4
M8
12-25
1/4
0.5-0.6
5300
246
1
10mmx6.5mmx5M
0.43
M8-M10
20-35
1/4
0.5-0.6
6000
246
1.2
12mmx8mmx5M
0.45
Bolt Capacity
Sq. Drive or Hex. Size inch 1/4
Working Pressure MPa 0.5-0.6
Free Speed rpm 4500
Length
Weight
Hose Size
mm 213
kg 0.64
O.D.xI.D.xL 8mmx5mmx6M
Air Consumption m続/min 0.20
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
13
PISTOL TYPE NON SHUT-OFF OIL PULSE SCREWDRIVERS
OUN-441PH
OUN-771PH OUN-331PH
OUN-661PH OUN-551PH
PULSE TOOL BITS Please use pulse tool bit with the pulse tool, it can reduce vibration and stablize torque accuracy.
Specifications Model No.
OUN-331PH OUN-441PH OUN-551PH OUN-661PH OUN-771PH
Torque Range Nm 6-8
Sq. Drive or Hex. Size inch 1/4
Working Pressure MPa 0.5-0.6
Free Speed rpm 4200
M6
10-18
1/4
0.5-0.6
M6-M8
15-27
1/4
0.5-0.6
M8-M10
25-32
1/4
M10
30-40
1/4
Bolt Capacity M5-M6
Length
Weight
Hose Size
mm 138
kg 0.87
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.35
5300
148
0.93
10mmx6.5mmx5M
0.4
6300
156
0.96
10mmx6.5mmx5M
0.4
0.5-0.6
6000
161
1
10mmx6.5mmx5M
0.43
0.5-0.6
6000
156
1.3
12mmx8mmx5M
0.45
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
14
PISTOL TYPE NON SHUT-OFF OIL PULSE WRENCHES
OUN-441PD OUN-331PD
OUN-771PD OUN-551PD OUN-661PD
O-RING PIN
PULSE TOOL SOCKET Please use pulse tool socket with the pulse tool, it can reduce vibration and stablize torque accuracy.
15
Fix socket with retainer and o-ring. use in situation that not change sockets often.
RETAINING PIN (OPTIONAL)
Use in situation that change sockets often.
OUN-1001PD
OUN-881PD
OUN-991PD
OUN-1801PD OUN-1301PD
OUN-1501PD
Specifications Model No.
OUN-331PD OUN-441PD OUN-551PD OUN-661PD OUN-771PD OUN-881PD OUN-991PD OUN-1001PD OUN-1301PD OUN-1501PD OUN-1801PD
Torque Range Nm 6-12
Sq. Drive or Hex. Size inch 3/8
Working Pressure MPa 0.5-0.6
Free Speed rpm 4200
Length
Weight
Hose Size
mm 137
kg 0.86
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.35
M6
10-20
3/8
0.5-0.6
M6-M8
20-38
3/8
0.5-0.6
5300
147
0.93
10mmx6.5mmx5M
0.4
6300
153
0.96
10mmx6.5mmx5M
M8-M10
30-48
3/8
0.4
0.5-0.6
6000
161
1
10mmx6.5mmx5M
M10
40-60
0.43
3/8
0.5-0.6
6000
156
1.3
12mmx8mmx5M
M10-M12
0.45
55-80
1/2
0.5-0.6
4700
179
1.6
17mmx10mmx5M
0.5
M10-M12
70-100
1/2
0.5-0.6
4200
176
1.8
17mmx10mmx5M
0.57
M12-M14
90-130
1/2
0.5-0.6
4200
178
2.1
17mmx10mmx5M
0.6
M12-M14
120-160
1/2
0.5-0.6
2800
208
2.6
17mmx10mmx5M
0.65
M16
140-210
3/4
0.5-0.6
3000
216.5
3.12
17mmx10mmx5M
0.9
M18-M20
190-280
3/4
0.5-0.6
2800
230
3.9
21mmx13mmx5M
0.95
Bolt Capacity M5-M6
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
16
STRAIGHT TYPE NON SHUT-OFF OIL PULSE WRENCHES
OUN-331SD
OUN-441SD
OUN-551SD
O-RING PIN
OUN-661SD
OUN-771SD
Fix socket with retainer and o-ring. use in situation that not change sockets often.
OUN-881SD
RETAINING PIN (OPTIONAL)
PULSE TOOL SOCKET Please use pulse tool socket with the pulse tool, it can reduce vibration and stablize torque accuracy.
Use in situation that change sockets often.
Specifications Model No.
OUN-331SD OUN-441SD OUN-551SD OUN-661SD OUN-771SD OUN-881SD
M4-M5
Torque Range Nm 6-12
Sq. Drive or Hex. Size inch 3/8
Working Pressure MPa 0.5-0.6
Free Speed rpm 4200
M6-M8
16-20
3/8
0.5-0.6
M8
20-38
3/8
0.5-0.6
M8-M10
30-48
3/8
M10
40-60
M10-M12
55-80
Bolt Capacity
Length
Weight
Hose Size
mm 219
kg 0.88
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.35
5300
232
0.88
10mmx6.5mmx5M
0.4
6300
233
0.98
10mmx6.5mmx5M
0.4
0.5-0.6
5300
243
1
10mmx6.5mmx5M
0.43
3/8
0.5-0.6
6000
238
1.2
12mmx8mmx5M
0.45
1/2
0.5-0.6
4700
262
1.6
17mmx10mmx5M
0.5
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
17
STRAIGHT TYPE NON SHUT-OFF OIL PULSE SCREWDRIVERS
OUN-331SH OUN-441SH
OUN-221SH
OUN-661SH OUN-771SH OUN-551SH
PULSE TOOL BITS Please use pulse tool bit with the pulse tool, it can reduce vibration and stablize torque accuracy.
Specifications Model No.
OUN-221SH OUN-331SH OUN-441SH OUN-551SH OUN-661SH OUN-771SH
Bolt Capacity M3-M4
Torque Range Nm 2-6
Sq. Drive or Hex. Size inch 1/4
Working Pressure MPa 0.5-0.6
Free Speed rpm 5000
Length
Weight
Hose Size
mm 213
kg 0.64
O.D.xI.D.xL 8mmx5mmx6M
Air Consumption m続/min 0.20
M4-M5
6-8
1/4
0.5-0.6
4200
224
0.89
10mmx6.5mmx5M
0.35
M6-M8
10-18
1/4
0.5-0.6
5300
237
0.89
10mmx6.5mmx5M
0.4
M8
15-27
1/4
0.5-0.6
6300
233
0.98
10mmx6.5mmx5M
0.4
M8-M10
25-32
1/4
0.5-0.6
5300
246
1
10mmx6.5mmx5M
0.43
M10
30-40
1/4
0.5-0.6
6000
246
1.2
12mmx8mmx5M
0.45
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
18
ANGLE TYPE AIR OIL PULSE TOOL 180ยบ adjustable head designed makes more convenience to adjust the direction.
New designed connection lessen vibration when fastening jobs. It enable to work in stable condition.
PAT. It makes users to adjust torque nice and easily.
R/L Switcher
HOW TO ADJUST TORQUE
RETAINING PIN (OPTIONAL)
Use in situation that change sockets often.
Model No.
Fix socket with retainer and o-ring. use in situation that not change sockets often.
C mm
OUN-551SC OUN-661SC OUN-771SC 16 OUT-551SC OUT-661SC OUT-771SC OUN-881SC 22.5 OUT-881SC
19
Lower torque
O-RING PIN
H
Higher torque
D
in
mm
in
mm
in
5/8
60
2 3/8
9.5
3/8
7/8
78
3 1/8
12.7
1/2
ANGLE TYPE SHUT-OFF OIL PULSE WRENCHES
OUT-551SC
OUT-771SC
OUT-661SC
OUT-881SC
Specifications Model No.
Bolt Capacity
OUT-551SC OUT-661SC OUT-771SC OUT-881SC
M5-M6
Torque Range Nm 6-12
Sq. Drive or Hex. Size inch 3/8
Working Pressure MPa 0.5-0.6
Free Speed rpm 6000
Length
Weight
Hose Size
mm 265
kg 1.5
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.4
M6
10-20
3/8
0.5-0.6
5000
276
1.5
10mmx6.5mmx5M
0.43
M8
15-30
3/8
0.5-0.6
5800
271
1.7
12mmx8mmx5M
0.45
M8-M10
30-75
1/2
0.5-0.6
2700
307
2.5
17mmx10mmx5M
0.5
NON SHUT-OFF OIL PULSE WRENCHES
OUN-661SC
OUN-551SC
OUN-881SC
OUN-771SC
Specifications Model No.
OUN-551SC OUN-661SC OUN-771SC OUN-881SC
Bolt Capacity M6-M8
Torque Range Nm 15-20
Sq. Drive or Hex. Size inch 3/8
Working Pressure MPa 0.5-0.6
Free Speed rpm 6000
Length
Weight
Hose Size
mm 265
kg 1.4
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.4
M8
20-30
3/8
0.5-0.6
5000
276
1.5
10mmx6.5mmx5M
0.43
M8-M10
30-45
3/8
0.5-0.6
5800
271
1.7
12mmx8mmx5M
0.45
M10-M12
40-85
1/2
0.5-0.6
2700
307
2.5
17mmx10mmx5M
0.5
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
20
ANGLE CONCAVE TYPE ANGLE CONCAVE TYPE NON SHUT-OFF WRENCHES
OUN-551SCU
OUN-661SCU
OUN-771SCU
OUN-881SCU
PURCHASING NOTE: Customers should be aware of the size of incepted socket when the model is decided. OUN-551CU EXAMPLE: Model No. Socket Size Model no.
OUN-551SCU OUN-661SCU OUN-771SCU OUN-881SCU
8 or 3/8
L mm 97 102 102 121
H in 3 7/8 4 4 4 3/4
D
T
C
mm
in
mm
in
mm
in
mm
in
52.5
2 1/8
10
3/8
3
1/8
16
5/8
62.5
2 1/2
13
1/2
3.5
1/8
22.5
7/8
New products for using in narrow space, because it do not have to combine with socket while working
Specifications Model No.
OUN-551SCU OUN-661SCU OUN-771SCU OUN-881SCU
21
Torque Range Nm 15-25
Socket Size
Socket Size
mm 8,10,11,12,13
1/4, 3/8, 7/16, 1/2
Working Pressure MPa 0.5-0.6
20-35
11,12,13
3/8, 7/16, 1/2
0.5-0.6
30-45
11,12,13
3/8, 7/16, 1/2
0.5-0.6
40-75
15,17,19
9/16, 5/8, 11/16, 3/4
0.5-0.6
inch
Free Speed rpm 5700
Length
Weight
mm 265
kg 1.4
Air Consumption m続/min 0.4
5500
276
1.5
0.43
5200
271
1.7
0.45
2500
307
2.5
0.5
GEARED HEAD TYPE PISTOL TYPE NON SHUT-OFF OIL PULSE WRENCHES
OUN-70PR-1 OUN-50PR OUN-60PR
OUN-80PR-2 OUN-70PR-2
OUN-80PR-1 PURCHASING NOTE Customers should be aware of the size incepted socket when the model is decided OUN-50PR EXAMPLE: Model No. Across Flat
8 or 3/8
Geared head type oil pulse wrench is more suitable forworking in narrow space, espacially the angle geared head type which can reach narrower space. This products henerate less creation than traditional ones, so it can provide more comfort for the uses. H
Model No.
W
L
C
mm 14
inch 9/16
mm 32
inch 1 1/4
mm 94.5
inch 3 18/25
mm 12.5
1/2
14
9/16
32
1 1/4
101
4
16
5/8
20
25/32
34
1 11/32
161.5
6 5/16
17
5/8
20
25/32
42
1 21/32
169
6 1/2
21
13/16
20
25/32
42
1 21/32
169
6 1/2
21
13/16
20
25/32
52
179
7 1/8
26
1
Noise
Length
Weight
Hose Size
dB(A) 78
mm 295
kg 1.84
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.4
OUN-50PR OUN-60PR OUN-70PR-1 OUN-70PR-2 OUN-80PR-1 OUN-80PR-2
2
inch
Specifications Model No.
OUN-50PR OUN-60PR OUN-70PR-1 OUN-70PR-2 OUN-80PR-1 OUN-80PR-2
mm inch 8, 9.5, 10, 11.1, 12 3/8, 7/16
Torque Range Nm 12-20
Free Speed rpm 3400
12, 13, 14.3, 16, 17 9/16, 5/8
20-32
3200
78
310
1.99
10mmx6.5mmx5M
0.43
14.3, 16, 17, 18
9/16, 5/8
30-43
3000
80
371
2.86
12mmx8mmx5M
0.45
19, 21, 22, 24
3/4, 7/8
42-55
3000
80
379
2.92
12mmx8mmx5M
0.45
19, 21, 22, 24
3/4, 7/8
52-65
2800
82
398
3.36
17mmx10mmx5M
0.5
27, 28.6, 30, 32
1 1/8
63-75
2800
82
406
3.42
17mmx10mmx5M
0.5
Across Flat
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
22
GEARED HEAD TYPE STRAIGHT TYPE NON SHUT-OFF OIL PULSE WRENCHES
OUN-70SR-1 OUN-80SR-2
OUN-60SR
OUN-80SR-1
OUN-50SR OUN-70SR-2
PURCHASING NOTE Customers should be aware of the size incepted socket when the model is decided. OUN-50SR EXAMPLE: Model No. Across Flat
8 or 3/8 H
Model No.
OUN-50SR OUN-60SR OUN-70SR-1 OUN-70SR-2 OUN-80SR-1 OUN-80SR-2
W
L
C
inch 9/16
mm 32
inch 1 1/4
mm 94.5
inch 3 18/25
mm 12.5
1/2
14
9/16
32
1 1/4
101
4
16
5/8
20
25/32
34
1 11/32
161.5
6 5/16
17
5/8
20
25/32
42
1 11/32
169
6 1/2
21
13/16
20
25/32
42
1 11/32
169
6 1/2
21
13/16
20
25/32
52
2
179
7 1/8
26
1
mm 14
inch
Specifications Model No.
OUN-50SR OUN-60SR OUN-70SR-1 OUN-70SR-2 OUN-80SR-1 OUN-80SR-2
mm inch 8, 9.5, 10, 11.1, 12 3/8, 7/16
Torque Range Nm 12-20
Free Speed rpm 3400
Noise
Length
Weight
Hose Size
dB(A) 78
mm 373
kg 1.86
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m続/min 0.4
12, 13, 14.3, 16, 17 9/16, 5/8
20-32
14.3, 16, 17, 18
9/16, 5/8
30-43
3200
78
391
1.94
10mmx6.5mmx5M
0.43
3000
80
454
2.89
12mmx8mmx5M
19, 21, 22, 24
3/4, 7/8
0.45
42-55
3000
80
463
2.96
12mmx8mmx5M
19, 21, 22, 24
0.45
3/4, 7/8
52-65
2800
82
479
3.4
17mmx10mmx5M
27, 28.6, 30, 32
0.5
1 1/8
63-75
2800
82
489
3.47
17mmx10mmx5M
0.5
Across Flat
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
23
GEARED HEAD TYPE PISTOL TYPE 26˚ NON SHUT-OFF OIL PULSE WRENCHES
OUN-60PA-L
OUN-50PA
OUN-60PA
OUN-70PA-1
OUN-70PA-2
OUN-80PA-1
PURCHASING NOTE Customers should be aware of the size incepted socket when the model is decided. OUN-50PA EXAMPLE: Model No. Across Flat
8 or 3/8
OUN-80PA-2 H
Model No.
OUN-50PA OUN-60PA OUN-60PA-L OUN-70PA-1 OUN-70PA-2 OUN-80PA-1 OUN-80PA-2
W
L
C
mm 14
inch 9/16
mm 32
inch 1 1/4
mm 114
inch 4 13/27
mm 12.5
1/2
inch
14
9/16
32
1 1/4
101
4
16
5/8
14
9/16
32
1 1/4
120
4 3/4
16
5/8
20
25/32
34
1 11/32
161.5
6 5/16
17
5/8
20
25/32
42
1 21/32
169
6 1/2
21
13/16
20
25/32
42
1 21/32
169
6 1/2
21
13/16
20
25/32
52
2
179
7 1/8
26
1
Specifications Model No.
OUN-50PA OUN-60PA OUN-60PAL OUN-70PA-1 OUN-70PA-2 OUN-80PA-1 OUN-80PA-2
mm inch 8, 9.5, 10, 11.1, 12 3/8, 7/16
Torque Range Nm 12-20
Free Speed rpm 3400
Noise
Length
Weight
Hose Size
dB(A) 78
mm 291
kg 1.88
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m³/min 0.4
12, 13, 14.3, 16, 17 9/16, 5/8
20-32
12, 13, 14.3, 16, 17 9/16, 5/8
20-32
3200
78
307
2.03
10mmx6.5mmx5M
0.43
3200
78
325
2.09
10mmx6.5mmx5M
14.3, 16, 17, 18
9/16, 5/8
0.43
30-43
3000
80
369
2.91
12mmx8mmx5M
19, 21, 22, 24
0.45
3/4, 7/8
42-55
3000
80
376
2.96
12mmx8mmx5M
0.45
19, 21, 22, 24
3/4, 7/8
52-65
2800
82
397
3.40
17mmx10mmx5M
0.5
27, 28.6, 30, 32
1 1/8
63-75
2800
82
405
3.46
17mmx10mmx5M
0.5
Across Flat
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
24
GEARED HEAD TYPE STRAIGHT TYPE 26˚ NON SHUT-OFF OIL PULSE WRENCHES
OUN-60SA
OUN-50SA
OUN-70SA-1
OUN-80SA-1
OUN-70SA-2
OUN-80SA-2
PURCHASING NOTE Cstomers should be aware of the size incepted socket when the model is decided. OUN-50SA EXAMPLE: Model No. Across Flat
8 or 3/8 H
Model No.
OUN-50SA OUN-60SA OUN-70SA-1 OUN-70SA-2 OUN-80SA-1 OUN-80SA-2
W
L
C
mm 14
inch 9/16
mm 32
inch 1 1/4
mm 94.5
inch 3 18/25
mm 12.5
1/2
inch
14
9/16
32
1 1/4
101
4
16
5/8
20
25/32
34
1 11/32
161.5
6 5/16
17
5/8
20
25/32
42
1 21/32
169
6 1/2
21
13/16
20
25/32
42
1 21/32
169
6 1/2
21
13/16
20
25/32
52
2
179
7 1/8
26
1
Specifications Model No.
OUN-50SA OUN-60SA OUN-70SA-1 OUN-70SA-2 OUN-80SA-1 OUN-80SA-2
mm inch 8, 9.5, 10, 11.1, 12 3/8, 7/16
Torque Range Nm 12-20
Free Speed rpm 3400
Noise
Length
Weight
Hose Size
dB(A) 78
mm 370
kg 1.9
O.D.xI.D.xL 10mmx6.5mmx5M
Air Consumption m³/min 0.4
12, 13, 14.3, 16, 17 9/16, 5/8
20-32
14.3, 16, 17, 18
9/16, 5/8
30-43
3200
78
388
1.99
10mmx6.5mmx5M
0.43
3000
80
454
2.95
12mmx8mmx5M
19, 21, 22, 24
3/4, 7/8
0.45
42-55
3000
80
460
2.99
12mmx8mmx5M
19, 21, 22, 24
0.45
3/4, 7/8
52-65
2800
82
476
3.45
17mmx10mmx5M
27, 28.6, 30, 32
0.5
1 1/8
63-75
2800
82
487
3.49
17mmx10mmx5M
0.5
Across Flat
Note: The precision of torque may have deviation between tool can reach and actual fastening job due to different condition and joint situation. Testing of selected tool in real condition is advised. Please reference the following. Hard joint application: 70% of the maximum torque range in the catalog Soft joint application: The minimum of the torque in the catalog
25
UNIT CONVERSION
TORQUE CONVERSION UNIT Ncm Nm kgf.cm kgf.m
Ncm 1 100 9.807 980.7
Nm 0.01 1 0.09807 9.807
lbf.in ibf.ft
11.3 135.6
0.113 1.356
kgf.cm 0.102 10.2 1 100
kgf.m 0.00102 0.102 0.01 1
lbf.in 0.008851 8.8 0.868 86.8
ibf.ft 0.007376 0.74 0.07233 7.233
1.152 13.83
0.01152 0.1383
1 12
0.08333 1
AIR PRESSURE CONVERSION UNIT Mpa Bar kgf/cm2 Psi
Mpa 1 100 9.807 980.7
Bar 0.01 1 0.09807 9.807
kgf/cm2 0.102 10.2 1 100
Psi 0.00102 0.102 0.01 1
kw 1 100 9.807 980.7
kgf m/s 0.01 1 0.09807 9.807
PS 0.102 10.2 1 100
HP 0.00102 0.102 0.01 1
POWER CONVERSION UNIT kw kgf m/s PS HP
OIL AND REPAIR KIT FOR OIL TOOL
HYDRAULIC CYLINDER OIL
AIR MOTOR LUBRICANT
REPAIR KIT
26
FEATURES OIL PULSE TOOL VS. IMPACT WRENCH An impact wrench is well-used in industrial assembly line. It is powerful and allows for quick operation. however, pulse tools provide major advantage: Higher accuracy and enhance quality and productivity. Reduce Sound Level. Longer service life due to less wear-out.
OIL PULSE TORQUE VS. IMPACT TOOL TORQUE Offering a healthy work environment featuring operator comfort while reducing fatigue. The torque output can be easily adjusted by turning torque adjustor through the plus whole without dismantling the tool. As you can see as following. within 0.2-1sec., when the oil pulse tools reach the torque, it won’t generate larger torque.
27
IMPACT TOOL IMPACT SCREWDRIVER TORQUE series industral impact wrench is suitable for all kinds of fastening jobs. The rapid rising of the torque increases efficiency and is more convenient for the users.
Hammer Pin
Hammer Clump
Hammer Flame Cam
Strike Drill
ADJUSTED SWITCHER
COZY AND LIGHTER HANDLE
360ยบ UNIVERSAL SILENCER
TWIN-CHAMBER MOTOR IMPACT WRENCH TORERO
improved and patented twin-chamber motor (PAT.) makes a breakthrough to conventional single-chamber motor design. The new-designed twin-chamber motor applies nine-blade,two-ring impact block, which offers twice horsepower than the old single-hamber motor product. The twin motor impact wrench is especially suitable to fasten soft connections with higher speed (reach the defined torsion within three seconds).
Hammer Clump Hammer Flame Hammer Pin
Strike Drill
28
IMPACT TOOL IMPACT WRENCHES TWIN HAMMER MECHANISM
IW-1214PD
IW-1618PD
IW-1012PD
IW-1416PD
IW-1822PD IW-2224PD
IW-1820PD
IW-2022PD
Specifications Model No.
IW-1012PD IW-1214PD IW-1416PD IW-1618PD IW-1820PD IW-2022PD IW-1822PD IW-2224PD
29
Bolt Capacity M12
Torque Range Nm 120
Sq. Drive or Hex. Size inch 3/8
Working Pressure psi 90
Free Speed rpm 9500
kg 1.4
Recommended Hose Size I.D. / mm 8
Air Consumption cfm 17.2
Length
Weight
mm 163
M12-M14
170
3/8
90
8500
168
1.8
10
17.5
M14
220
1/2
90
8500
169
1.83
10
17.5
M14-M16
260
1/2
90
7000
172
2
10
18.2
M16
300
1/2
90
6500
191
2.63
10
19.1
M16-M18
380
1/2
90
6000
202
3.1
10
22
M16-M18
350
3/4
90
6500
197
2.7
10
19.1
M18
450
3/4
90
6000
208
3.2
10
22
IMPACT TOOL PISTOL TYPE IMPACT WRENCHES / SCREWDRIVERS
SD-68PD
SD-56PH
SD-68PH
SD-10PH SD-10PD
Specifications Model No.
SD-56PH SD-68PH SD-10PH SD-68PD SD-10PD
M6-M8
Torque Range Nm 20-30
Sq. Drive or Hex. Size inch 1/4
Working Pressure psi 90
Free Speed rpm 10000
M8-M10
25-50
1/4
90
M10-M12
60-80
1/4
90
M8-M10
40-80
3/8
M10-M12
80-110
3/8
Bolt Capacity
Recommended Hose Size I.D. / mm 6.5
Air Consumption m続/min 0.3
1
8
0.33
1.15
8
0.45
147
1
8
0.33
141
1.2
8
0.45
Length
Weight
mm 138
kg 0.9
10000
154
8000
149
90
10000
90
8000
30
IMPACT TOOL STRAIGHT TYPE IMPACT WRENCHES / SCREWDRIVERS
SD-35SH
SD-56SH
SD-10SD
SD-68SH
SD-68SD
SD-10SH
SD-1213SD
Specifications Model No.
SD-35SH SD-56SH SD-68SH SD-10SH SD-68SD SD-10SD SD-1213SD
31
M5-M6
Torque Range Nm 10-20
Sq. Drive or Hex. Size inch 1/4
Working Pressure psi 90
Free Speed rpm 11000
M6-M8
20-30
1/4
90
M8-M10
25-50
1/4
90
M10-M12
35-60
1/4
M8-M10
40-80
M0-M12 M12
Bolt Capacity
Recommended Hose Size I.D. / mm 6.5
Air Consumption m続/min 0.25
Length
Weight
mm 194
kg 0.6
10000
219
0.9
6.5
0.3
10000
243
1
8
0.33
90
7500
237
1.15
8
0.45
3/8
90
10000
236
1
8
0.33
60-110
3/8
90
7500
231
1.2
8
0.45
60-120
3/8
90
7000
245
1.25
10
0.5
DIRECT DRIVE AIR SCREWDRIVERS AIR SCREWDRIVERS
RP-6SH
RP-8PH
RP-6PH
Fastening job for the self-tapping and carpentering without impulsing vibration
Specifications M6
Torque Range Nm 14
Sq. Drive or Hex. Size inch 1/4
Working Pressure psi 90
Free Speed rpm 2000
M6
14
1/4
90
2000
M6
18
1/4
90
450
Model No.
Bolt Capacity
RP-6PH RP-6SH RP-8PH
kg 1
Recommended Hose Size I.D. / mm 8
Air Consumption m続/min 0.33
236
1
8
0.33
175
1.35
8
0.65
Length
Weight
mm 140
AIR DRILLS
AD-24PR
AD-38SR
AD-38PR
Specifications Model No.
1/2"-20UNF
Free Speed rpm 450
3/8"-24UNF
2000
140
1
90
0.5
3/8"-24UNF
2000
225
1.07
90
0.5
Spindle Thread inch
AD-24PR AD-38PR AD-38SR
kg 1.5
Working Pressure psi 90
Air Consumption m続/min 0.65
Length
Weight
mm 205
32
IMPACT WRENCHES IMPACT WRENCHES
IW-4019PT IW-4002PT
IW-4003PT
IW-8006PT IW-6004PT
IW-6005PT
Specifications Model No.
IW-4019PT IW-4002PT IW-4003PT IW-6004PT IW-6005PT IW-8006PT
33
M13
Torque Range Nm 130
M13
120
1/2
90
10000
170
1.2
10
10.6
M16
230
1/2
90
10000
193
2.02
10
13
M26
280
3/4
90
9000
200
2.2
10
13.7
M26
360
3/4
90
5500
170
3.6
10
14
M41
450
1
90
4000
256
5.1
13
15.8
Bolt Capacity
Sq. Drive or Hex. Size inch 1/2
Working Pressure psi 90
Free Speed rpm 13500
kg 1.2
Recommended Hose Size I.D. / mm 10
Air Consumption cfm 10.6
Length
Weight
mm 130
IMPACT WRENCHES HEAVY DUTY IMPACT WRENCHES
IW-8015ST8
IW-8015ST
IW-8016ST
IW-8016ST8
Specifications Model No.
IW-8015ST8 IW-8015ST IW-8016ST8 IW-8016ST
M50
Torque Range Nm 3797
M50
3797
1
90
3000
453
13.1
13
20
M50
3120
1
90
3400
597
13.5
13
20
M50
3120
1
90
3400
432
11.7
13
20
Bolt Capacity
Sq. Drive or Hex. Size inch 1
Working Pressure psi 90
Free Speed rpm 3000
kg 14.6
Recommended Hose Size I.D. / mm 13
Air Consumption cfm 20
Length
Weight
mm 622
34
GRINDERS
AG-4003L AG-4003M
AG-4003
AG-7006 AG-5003A
AG-5003LA
Specifications Model No.
AG-4003 AG-4003L AG-4003M AG-5003A AG-5003LA AG-7006
35
mm 100
inch 4
W 510
Working Pressure psi 90
100
4
510
90
11000
230
1.8
PT1/4
0.45
100
4
500
90
10500
185
1.2
PT1/4
0.35
125
5
600
90
9500
230
1.8
PT1/4
0.45
125
5
600
90
9500
230
1.8
PT1/4
0.45
178
7
1030
90
6000
270
3.3
PT1/4
0.95
Wheel Size
Power
Free Speed rpm 11000
Length
Weight
Air Inlet
mm 230
kg 1.8
inch PT1/4
Air Consumption m続/min 0.45
AIR MICRO DIE GRINDERS AIR MICRO DIE GRINDERS
SG-02
SG-01
Specifications mm 3
inch 1/8
Working Pressure psi 90
3
1/8
90
Collet Size
Model no.
SG-01 SG-02
Free Speed rpm 60000 60000
inch PT1/4
Air Consumption cfm 8
Sound pressure dB(A) 82
PT1/4
8
82
Length
Weight
Air Inlet
mm 160
kg 0.21
145
0.25
SPECIFICATION CONCOURSE OF 360ยบ ROTATE COUPLING
PT-04
36
TORERO DIGITAL TORQUE TESTER TORERO digital torque tester (PAT.) The torque tester made specifically for field simulation purpose; the available units to be displayed directly include the N.cm, N.m, kgf.cm, kgf.m, lbf.in, lbf.ft and shaft power, pressure, total 8 functions. This tester is applicable to hydraulic torque wrenches and impact or clutch-type power tools driven by pneumatic or electrical power. This tester is able to directly make comparison with screw torque or with torque wrench. The connection angle is at 60°. User can use this tester to make torque test easily by a very convenient connecting way; it is the most cost-effective torque tester that will minimize the company’s investment. The calibration process of this tester is very easy and convenient; the mechanical gap compensation capability allows user using a gauge-type torque wrench to make calibration at any time as wish.
CUT-20-1 75º
(PAT.) Mechcnical Correction of the internal pressure
Test backward diagram
Specifications Model no.
Bollt Capacity mm M6 M8 M10
CUT-20-1
Power Supply
Torque Range inch 5-15 15-31 31-54
Weight kg MPa 4.5
AC220V
CUT-30-1 The actual bolt size to do the simulation test
Specifications Model no.
mm M12
Torque Range inch 54-88
M14 M16
88-148 148-190
Bollt Capacity
CUT-30-1
Power Supply
Weight kg MPa 9
AC220V
CUT-40-1
Specifications Model no.
CUT-40-1
mm M18
Torque Range inch 199-290
M20 M24
290-440 440-680
Bollt Capacity
Power Supply
37
AC220V
Weight kg MPa 112