MICO+ 48V DC The Electronic Load Circuit Control for 48V DC
UNIQUE! + MICO+ 48V DC is the first electronic load circuit control for 48V DC on the market!
• World's First! • No comparable product on the market!
MARKETS
Platzhalter für Hero-Bild Größe: 17,75 x 12,7 cm Positioniert auf 0 und 0,8 cm
+ Power stations • Renewable energy + Telecommunications + Process industries + Printing industry + Testing systems • Automotive + Automation technology
MICO+ 48V DC IN DETAIL Spring clamp terminals On - off switch with LED 90% Warning Proven bridging system Non-volatile error memory
Large labels Rotary switches adjust current range Sealed (tamper-proof) Power on when starting up C-loads Temperature independent operating time
SWITCH OFF SUPPORTED BY MICROPROCESSOR Optimal switch off behavior: as early as necessary, as late as possible!
Current range adjustable with rotary switches • 1-2-3-4A • 1-2-4-6A
CASCADING CHANNEL START UP CASCADING START-UP Circuit breaker
MICO+ 48V DC channels start in succession at intervals of about 75 ms. This considerably reduces the inrush current
Irated
CAPACITIVE LOADS 5,000μF per channel • Equal to 20,000µF @ 24V DC Many capacitive loads like • Servo drives • Fieldbus systems • Analog cards • Controls Can be monitored with MICO
Platzhalter für Hero-Bild Größe: 17,75 x 12,7 cm Positioniert auf 0 und 0,8 cm
t
5,000µF 5,000µF
5,000µF 5,000µF
NON-VOLATILE ERROR MEMORY + The status of each channel is saved, even after a power reset
• Don’t look for errors, find them! • No automatic restart
• Optimal traceability after a power reset
THE INTEGRATED BRIDGING SYSTEM
+ Reliable up to 40A + Reduces wiring efforts + Reduces the chances for failures + Bridging system for • +48V DC • GND (0V) • ON • OFF
90% WARNING
Platzhalter für Hero-Bild Größe: 17,75 x 12,7 cm Positioniert auf 0 und 0,8 cm
+ Recognize problems before they cause a failure + Wear and tear increases the power demand for operating motors and valves + MICO+ 48VDC signals when 90% of the set tripping current is reached Flashing LED • Displayed directly on the module as assistance during start-up As digital signal (48VDC, 20mA) • Preventative diagnostics during operation
SIGNAL CONTACT + Group alarm contact for all channels + Digital output: 48V DC, max. 20mA + Reports the following conditions • Overload/short circuit • Deactivate manually
CONNECTION TECHNOLOGY + Spring clamp terminals + Rigid or flexible, With or without ferrule ends Platzhalter für Hero-Bild Größe: 17,75 x 12,7 cm Positioniert auf 0 und 0,8 cm
+ Maintenance-free + Vibration-proof
Input: max. 16mm² Output: max. 2x 1.5mm² Signale: max. 2.5mm²
SAVES ENERGY
Turn on all tripped channels with an 48VDC signal • Activate all tripped channels • To re-activate the channel, you no longer have to make the long trip to the control cabinet
OFF!
ON! Switch off all channels with an 48VDC signal • Switch off unnecessary components • If the affected component is needed again, then it can be reactivated with a signal
SAVES SPACE + Just 70mm widht for 4-channels + Saves space in the control cabinet + This reduces the installation efforts
8 channels 140mm
8 channels 208mm
TEMPERATURE INDEPENDENT!
MICO+ 48V DC is temperature independent! From -25°C … + 55°C, MICO+ will always correctly trip
- 25°C
+55°C Circuit Breakers • React slowly • Function depending on temperature • Have mechanical properties
MICO - Intelligent Power Distribution Standards • Cable and fire protection • Defined operating voltage • Saved operating modes
EN 60950-1; EN 60204-1 EN 61131-2 EN 61131-1
MICO+ 48V DC Approvals •
• In preparation
•
In preparation
• In preparation
• In preparation
MICO - The electronic over current protection device for 48V DC applications!
MICO+ 48VDC
Current ranges
MICO+ 48 VDC
1-2-3-4A
9000-42084-0100400
1-2-4-6A
9000-42084-0100600