TWGT Woods & Speciality Sets 2012 by Richard Kempton

Drivers Fairway Woods Speciality Sets

THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN

WISHONGOLF.COM

Woodhead Model Fitting Selection Drivers

NEW

Left Hand Models

NEW

739CCG 919 THIDRIVERS 919WHITE THI 959 OLDRIVER 915 CFE 949 MC DRIVERS DRIVERS OFFSET DRIVERS FAIRWAY WOODS The new 739CCG True Forged Titanium Drivers are designed to offer driver length fitting to from 46” to 42” in a Hand Select loft range from 9º to 12º. The 739CCG is designed with two screw positions to receive weight screws from 2.5g to 16g to allow movement of the center of gravity forward to back. In addition, the CP Titanium hosel construction will allow experienced clubmakers to bend the lie and face angle to +/-2º from the heads’ design specs for more customization.

Through our Hand Select program, TWGT can offer the 919THI Drivers in RH in lofts from 8 to 16 in half degree increments and in face angles from 1 open to 4 closed in some of the 919THI models. In LH, we can offer the 919THI to left hand players in lofts from 10.5 to 14 with face angles from square to 2 closed. Add that to the >5,000 g/ cm2 MOI and superb variable thickness face design, this makes the 919THI able to offer superb performance for the widest possible range of golfers.

In response to demand, TWGT created the popular 919THI Drivers in a beautiful and striking White finish option. The finish of the 919THI White Drivers is a matte surface finish to eliminate glare from the sun. Created with the same >5,000 g/cm2 MOI and variable thickness face as the more traditional 919THI Black Driver models. 919THI White Drivers are available in 9º, 11º, 13º High Launch in RH with +/-1º Hand Select options for loft and face angle. [page 12]

In response to requests from golfers who play strictly for fun, TWGT created the 959OL Driver as an intentionally non-conforming driver with a higher COR for more distance. Through a proprietary triple variable thickness face design the COR of the 959OL is designed to be close to an 0.880 COR while also offering outstanding off-center hit performance. Available in RH in 10.5 loft with hand select options from 10 to 11.5. Designed for use by golfers with a driver clubhead speed of 100mph and lower.

A popular Driver model in the TWGT design line since 2003, the 915CFE Drivers are available in RH Offset Hosel design in 11º and 14º lofts, with Hand Select options +/-1º within each loft model. Combined with their 1º closed face angle spec also with +/-1º Hand Select options, the 915CFE Drivers are a good fitting option for golfers who need help reducing a slice to a fade. The 10-2-3 beta titanium variable thickness face also offers good offcenter hit performance.

Complementing its 0.830 COR cup-face design, the 949MC woods are designed with a 2nd weight bore and CNC engraved scorelines to deliver a consistent, penetrating long distance flight with the woods. The 949MC are very “hot feeling” woods which are very easy to hit well up to fly from the fairway. Available in RH in 14º, 16.5º, 18º and 21.5 lofts and 0º square face angle, both specs with +/-1º Hand Select options. [page 20]

[page 17]

[page 14] [page 12]

[page 16]

800. 470. 0072 • W I SH O N G O L F. C O M

Fairway Woods

Specialty Sets

NEW

Left Hand Model

2nd Weight Bore

929 HS 915 HL 915 F/H 730CL DRIVER 730 CL FAIRWAY WOODS FAIRWAY WOODS FAIRWAY HYBRIDS FAIRWAY WOODS The 929HS fairway woods are the ultimate in high performance game improvement wood design, and manufactured with a soft 304 stainless steel hosel to allow for lie and face angle bending adjustments in a range of +/-4º. With 0.825 COR and 31mm face height, the 929HS offer the greatest ease in hitting the ball well up to fly with maximum distance. Available in both RH and new in LH for 2012. RH in #2(12º), #3(14º), #4(16.5º), #5(18º) and #7(21.5º). LH in #3(15º) and #5(18.5º) with Hand Select +/-1º. [page 18]

With their slight offset hosel design, the 915HL woods stand as the perfect match with the 915CFE Offset Drivers for golfers who fade/ slice the ball with all the woods. Due to their additional #9 and #11 wood options, the 915HL woods are also good for golfers who prefer a high loft fairway wood over a hybrid to replace their hard to hit low loft irons. Offered in RH in #3, 4, 5, 7, 9, and 11 – all heads with a 2nd weight bore in the sole to expand custom length and swingweight fitting options for golfers. [page 22]

With twin weight bores in each head, the 915F/H are designed to be custom fit and built to either fairway wood lengths or iron length hybrid clubs. As a hybrid club, the 915F/H is ideal for golfers who prefer the look of a fairway wood type face progression. As a fairway wood, the 915F/H offer a slightly smaller profile than traditional fairway woods. Designed in RH in 13º (2wood or driving hybrid), 16º (4-wood or #1 hybrid), 18.5º (5-wood or #2 hybrid), 21º (7 wood or #3 hybrid), and 24.5º (9 wood or #4 hybrid) each with +/-1º Hand Select loft option.

The very best fitting choice for men or women golfers with a driver swing speed lower than 80mph who also prefer a size/volume of 400cc over the typical 450-460cc volume of the majority of drivers. The 730CL Driver also features a slight, semi-offset hosel and 1º closed face angle which can be Hand Selected for 2 closed face to offer fade/slice reduction with a consistent high launch angle that all sub-80mph players need. RH in 16º loft with +/-1º Hand Select options.

Designed to match the 730CL Driver for sub80mph swing speed golfers, the 20º Long and 26º High fairway woods in the 730CL line are also a great choice for golfers who prefer a slightly smaller, pear-shape profile and golfers who struggle with consistently getting the ball well up to fly from light rough and normal fairway lie conditions. The addition of the 2nd weight bore on the sole allows customizing to a wider range of length and swingweight options.

FUTURE PRO JR.

DRIVERS & WOODS

The Future Pro woodheads for young golfers age 6 to 11 off a high quality full stainless steel design in higher loft options of Driver (15), #3 (20) and #5 (25), perfect for beginning junior golfers. The lighter headweight design combines with the hosel weight bore in each woodhead to allow clubmakers to perfectly custom fit the Future Pro woods to any young player to offer the very best start in the game. [page 26]

[page 24] [page 24]

[page 23]

919 THI Superb Variable Thickness Face, >5000 g/cm2 MOI, Designed with a Great Looking Profile and Shape. 919THI Offers Clubmakers the Widest Range of Custom Driver Fitting Options.

NEW

Drivers

IN LEFT HAND 11º AND 13.5º

SPECIFICATIONS – 919THI DRIVERS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

RH/LH

919*

919-9

460cc

9º

58º

0 square

202g

13”

GRT

18mm

919*

919-11

460

0.5 hook

202

GRT

919

919-11-LH

460

0.5 hook

202

GRT

919

919-10.5-DBP

460

10.5

3 hook

202

GRT

919*

919-13-HL

460

1 hook

202

GRT

919

919-13.5-LH

460

13.5

1 hook

202

GRT

919

919-15.5-HLP

460

15.5

1 hook

202

GRT

Bore Depth

Face Area

MOI Izz

35mm

4800mm2

5004cm2

*Available in Matte White Finish

DIMENSIONS – 919THI DRIVERS

• The 919THI Drivers are designed with a brand new form of precision tooling and modern cosmetics to offer the very best quality in a high performance titanium driver design. • The 919THI are also Available in a Matte Non-glare White Finish version in the RH 9º, 11º and 13º High Launch versions as an option to the 9º, 11º, 13º, 15.5º, 10.5º Draw Bias Plus and NEW left hand 11º and 13.5º in Black. • High >5000 g-cm2 MOI created from the slightly elongated but balanced head shape with additional weight inside the rear skirt areas of the body • Variable Thickness Face Design ensures the smallest drop in COR from center to off-center face locations – hit the 919THI off-center and you will not believe how well the face performs • GRT Face Design Ensures Consistent Launch Angle for all shots, whether hit low, center or high on the face

Head

Face Height

919-9

53mm

Face Width 105mm

Front-Back

Bore Diam.

Hosel OD

113mm

0.335”

13mm

919-11

105

113

0.335

4800

5015

919-11-LH

105

113

0.335

4800

5015

919-10.5-DBP

105

113

0.335

4800

5015

919-13-HL

105

113

0.335

4800

5025

919-13.5-LH

105

113

0.335

4800

5025

919-15.5-HLP

105

113

0.335

4800

5025

Face Material:

Ferrule Required:

SP700 Titanium

Yes, any 13.0mm OD X 0.335” ID

Body Material:

Hand Select Options:

6/4 Titanium

+/- 1° loft, lie, face angle

Face Construction:

+/- 2g headweight

Forged Variable Thickness

Scorelines:

Swingweight Bore:

CNC Engraved 0.8mm X 0.35mm

Yes, 7.5mm diam. X 15mm deep

Bottom of Bore to Ground: 919THI = 2”

800. 470. 0072 • W I SH O N G O L F. C O M

Precision tooling construction (Shown before full welding to display the precision fit of the body parts)

739 CCG The Ultimate in Custom Features Within a Titanium Driver Head Design

NEW

Drivers

SPECIFICATIONS – 739CCG DRIVERS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight*

Bulge

Roll

Face Prog.

739

739-9.5

450cc

9.5º

58º

0º Square

188g

13"

20" GRT

19mm

739

739-11

450

1 Hook

188

20" GRT

*Note: Headweight of 188g is without any weight screws installed.

DIMENSIONS – 739CCG DRIVERS

• 739CCG Titanium Drivers are True Forged to enable an ultra-thin 0.7mm wall thickness design to reduce the headweight to be as light as 193 grams for over length assembly when desired • Five Different Color Coded Weight Screws plus TWGT’s hosel weight bore allows clubmakers to customize the headweight from 193g up to 229g to offer length assembly from 42” to 46 1/2”

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Bore Depth

Face Area

MOI Izz

54mm

110mm

109mm

0.335"

13.0mm

30mm

4950mm2

see note

739-11

110

109

0.335

13.0

4950

see note

Note: MOI Izz increases as the headweight is increased by custom use of weight screws. At 188g body weight, MOI Izz is 4525 g/cm2; At maximum 229g body weight, MOI Izz is 5400g/cm2

Face Material:

Hand Select Options:

• Different Weight Screws Allow Center of Gravity Movement to change launch angle by up to 2.5º while also changing spin up to 500 rpms for later release players.

SP700 Titanium

+/- 1° loft, lie, face angle

Body Material:

+/- 3g headweight

6/4 Titanium (true forged)

Hosel Bending Options:

• Color Coded Weight Screws are offered in 2.5g(red), 6.5g(black), 9g(white), 13g(gold) and 16g(silver). 730CCG head requires two screws – Weight Screws are Ordered Separately.

Face Construction:

+/-2º for lie or face angle

True Forged Variable Thickness

Scorelines:

Swingweight Bore:

CNC engraved 0.8mm X 0.35mm

Yes, 7.5mm diam x 20mm deep

Bottom of Bore to Ground:

• Cp4 Titanium Hosel Allows Custom Lie and Face Angle Bending by +/-2* in any direction. Bending requires proper woodhead loft and lie machine and extreme care when clamping the head to prevent crushing the thin body wall structure.

Ferrule Required:

739CCG = 2.5”

Note: Use of the different weight/material screws in the two screw holes will result in differences in impact sound. Heavier weight screws result in lower impact tone. Lighter screws result in higher tone.

Head 739-9.5

Yes, any 13.0mm OD X 0.335” ID

WEIGHT SCREWS MUST BE ORDERED SEPARATELY

800. 470. 0072 • W I SH O N G O L F. C O M

739CCG WEIGHT SCREWS ITEM#

Weight

Color

Material

739-2.5G

2.5g

Red

aluminum

739-6.5G

6.5g

Black

steel

739-9G

White

steel

739-13G

13g

Gold

tungsten

739-16G

16g

Silver

tungsten

739-WRENCH

Torx wrench for weight screws

NOTE: Weight Screws must be ordered separately Each 739CCG head shipped with Torx Wrench 2.5g

6.5g

13g

16g

TRUE BILLET FORGED 6/4 T i BODY AND SP700 T i FACE

959 OL A Higher COR Driver Design for Golfers who Play Purely for Enjoyment. New Triple Variable Thickness Face Design for Incredible Off Center Hit Performance • An Ultra-high COR Driver Design to meet the demands

of the many golfers who requested such a design from TWGT

Driver

SPECIFICATIONS – 959OL DRIVERS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

959

959-10.5

455cc

10.5

58º

0º Square

198g

13"

GRT

18mm

DIMENSIONS – 959OL DRIVERS Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Bore Depth

Face Area

MOI Izz

959-10.5

55.5mm

100mm

110mm

0.335”

13.0mm

35mm

5000mm2

4875cm2

Face/Body Material:

Ferrule Required:

SP700 Titanium/ 6-4 Ti

Yes, any 13.0mm OD X 0.335” ID

Hosel Weight Bore:

Bottom of Bore to Ground:

Yes, 7.5mm diam x 15mm deep

959OL = 2”

• Full Radius Round Head Profile Shape with a

symmetrical face profile to allow the face design to approach an ultra-high COR of nearly 0.880 • Symmetrical Round Face Profile enhances a triple

variable thickness face to offer incredible off center hit performance • Reduced Rear Body Wall Thickness Sections to move

the center of gravity closer to the face for lower spin to combine with the ultra-high COR for maximum distance • The 959OL Drivers are Non-conforming to the USGA Rule for COR – intended for enjoyment only by golfers who do not play competitive events conducted under the USGA Rules of Golf • Finished in Black Metallic Gloss with satin and contrasting color highlights. Available in 10.5° loft in RH, hand select +/- 1º

THE 959OL THE 959OL IS DOES NOT DESIGNED FOR CONFORM TO SWING SPEEDS THE USGA OF 100MPH AND RULE FOR COR LOWER 16

800. 470. 0072 • W I SH O N G O L F. C O M

915 CFE 915CFE Titanium Drivers Offer High Performance and Full Game Improvement

Offset Drivers

SPECIFICATIONS – 915CFE DRIVERS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

RH/LH

915

915-OFF-11

460cc

11°

58°

1 closed

200g

12”

GRT

10mm

915

915-OFF-14

460

1 closed

200

GRT

DIMENSIONS – 915CFE DRIVERS • Mid- to semi-deep center of gravity position offers

normal trajectory for each loft and size

Head

Volume/Loft

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Bore Depth

Face Area

915 Offset

460/11

58mm

103mm

110mm

0.335”

13mm

30mm

4450mm2

915 Offset

460/14

103

110

0.335

4450

• Forged beta-titanium variable thickness face

construction increases face deflection away from the geometric center of the face for better ball speed on off-center hits • All 915CFE heads designed with GRT face to

ensure consistent launch angle and off-center hit performance • Longer face to back dimension for higher MOI

contributes to the off center hit forgiveness of the variable thickness beta-titanium face

Face Material:

Scorelines:

10V-2Fe-3Al Titanium

CNC engraved, 0.8mm x 0.4mm

Body Material:

Swingweight Bore:

6/4 Titanium

Yes, 7.5mm x 15mm

Face Construction:

Bottom of Bore to Ground:

Forged, Variable Thickness

915CFE LH = 2”

Ferrule Required:

915CFE offset = 2.5”

Yes, 13.0mm OD x 0.335” ID Hand Select Options: +/- 1° loft, lie, face angle +/- 2g weight

929 HS Shallow Face, High COR Design for Distance with Ease of Playability Soft Stainless Steel Hosel Allows Custom Lie and Face Angle Fitting • 304 Stainless Steel Hosel is separately welded to the body to enable ease in bending for a wide range of custom lie and face angle bending (+/-4*) • 31mm Shallow Face Height is ideal for golfers who play off tight, close mown fairways and for golfers who need more confidence getting the ball well up to fly • HS 350 High Strength Steel Thin Face allows for a high COR for increased ball speed and superb off center hit performance • Reduced Face-to-Back Sole Width narrows the sole to ground contact for more consistent contact with the ball, even from the rough • 929HS Available in Black Gloss Finish in RH #2, 3, 4, 5, 7 and LH in #3, 5. Also available in a White Matte Finish Version in RH in #3, 4, 5 and 7

NEW

Fairway Woods

LEFT HAND AVAILABLE

SPECIFICATIONS – 929HS FAIRWAY WOODS ITEM #

Head

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

929-2-RH

#2 - 12º

12°

57.5°

0 square

203g

13”

GRT

14mm

RH/LH RH

929-3-RH

#3 - 14

0 square

208

GRT

929-3-LH

#3 - 15

0 square

208

GRT

929-4-RH

#4 - 16.5

16.5

58.5

0 square

213

GRT

RH RH

929-5-RH

#5 - 18

0 square

218

GRT

929-5-LH

#5 - 18.5

18.5

0 square

218

GRT

929-7-RH

#7 - 21

0 square

228

GRT

17.5

DIMENSIONS – 929HS FAIRWAY WOODS Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Face Thick

#2 - 12º

31mm

84mm

77mm

0.335”

12.3mm

1.70mm

#3 - 14

0.335

12.3

1.65

#3LH - 15

0.335

12.3

1.65

#4 - 16.5

0.335

12.3

1.65

#5 - 18

0.335

12.3

1.65

#5LH - 18.5

0.335

12.3

1.65

#7 - 21

0.335

12.3

1.60

Face Material:

Hand Select Options:

HS 350 High Strength Steel (NiCr plated)

+/- 1° loft, lie, face angle

Body Material:

+/- 2g headweight

17-4 Stainless Steel

Lie/Face Angle Bending:

Hosel Material:

+/-4º in all directions

304 Stainless Steel

Note: Perform bending only in a metal wood type bending machine or request TWGT custom bending service

Face Construction:

Scorelines:

Forged High Strength Steel Face

CNC Engraved, 0.8mm wide x 0.2mm deep

Weight Bore:

Bottom of Bore to Ground:

1) Hosel Weight Bore - 7.5mm x 15mm

929HS = 1.5”

2) Sole Weight Bore - 7.5mm x 15mm Ferrule Required: Yes, any TWGT Wood Standard with 12.3mm Bottom OD

800. 470. 0072 • W I SH O N G O L F. C O M

NEW WHITE VERSION

2nd Weight Bore

UNIQUE DESIGN WITH BENDABLE HOSEL 19

949 MC The 949MC Fairway Woods Set the Standard for the Performance of High COR Wood • CNC Precision Engraved Scorelines replaces the former laser etched lines to channel moisture away from the face at impact from wet grass and rough for more penetrating ball flight • 2nd Weight Bore on the Sole to allow clubmakers a wider range of length, shaft weight and swingweight (MOI) fitting options for golfers • Forged, High Strength Steel Cup Face for High COR delivers the highest smash factor never thought possible from a fairway wood • Semi-Shallow Face Height combines with the high COR face design to offer a superb high performance design with the confidence to easily hit the ball high and far • Tapered Crown Wall Thickness Design gradually increases the wall thickness at the rear of the head to create a more rear CG position for slightly higher launch angle

Fairway Woods

SPECIFICATIONS – 949MC FAIRWAY WOODS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

RH/LH RH

949

3-14°

140cc

14°

57°

0 square

208g

13”

GRT-0

16mm

949

4-16.5°

140

16.5

57.5

0 square

213

GRT-0

17.5

949

5-18°

140

0 square

218

GRT-0

949

7-21.5°

140

21.5

58.5

0 square

228

GRT-0

20.5

DIMENSIONS – 949MC FAIRWAY WOODS Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Face Thick.

3-14°

32mm

90mm

79mm

0.335”

12.3mm

1.6mm

4-16.5°

0.335

12.3

1.6

5-18°

0.335

12.3

1.5

7-21.5°

0.335

12.3

1.5

Face Material:

Ferrule Required:

Forged HS300 High Strength Steel Alloy

Yes, any TWGT Wood Standard ferrule with

Body Material:

12.3mm bottom OD

17-4 Stainless Steel

Hand Select Options:

Face Construction:

+/- 1° loft, lie, face angle

Forged, Cup-Face

+/- 2g headweight

Weight Bores:

Scorelines:

1) Hosel Weight Bore (capy. 9g)

CNC engraved 0.8mm wide x 0.2mm deep

2) 2nd Weight Bore on Sole (capy. 9g)

Bottom of Bore to Ground: 949MC = 1.25”

800. 470. 0072 • W I SH O N G O L F. C O M

CNC Machined Scorelines

2nd Weight Bore

915 HL Full Game Improvement with SemiOffset Hosel, 2nd Weight Bore, in 3-wood through 11-wood • 915HL Semi-Offset Hosel provides slice reduction without looking too offset in the address position • Available in RH Only in #3, 4, 5, 7, 9, 11 • All 915HL Fairway Woodheads with 2 Weight Bores to expand length, shaft weight and swingweight fitting options

Fairway Woods

SPECIFICATIONS – 915HL FAIRWAY WOODS ITEM #

Head

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

RH/LH

915HL–3

3–HL

15°

57°

1° hook

206g

12”

18”

8mm

915HL–4

4–HL

16.5

57.5

1 hook

212

18”

8.5

915HL–5

5–HL

18.5

57.5

1 hook

216

18”

8.5

915HL–7

7–HL

1 hook

226

18”

915HL–9

9–HL

25.5

58.5

1 hook

231

18”

9.5

915HL–11

11–HL

28.5

1 hook

236

18”

DIMENSIONS – 915HL FAIRWAY WOODS Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Bore Depth

Face Thick.

3–HL

34mm

88mm

85mm

0.335”

12.3mm

28mm

2.5mm

4-HL

0.335

12.3

2.5

5–HL

0.335

12.3

2.5

7–HL

0.335

12.3

2.4

9–HL

0.335

12.3

2.4

11–HL

0.335

12.3

2.4

Body & Face Material: 17-4 Stainless Steel

Ferrule Required: Yes, any TWGT wood standard

Body & Face Construction: Investment Cast

with 12.3mm bottom OD

Weight Bores:

Hand Select Options:

1) Hosel Weight Bore

+/- 1° loft, lie, face angle

2) 2nd Weight Bore on Sole

2nd Weight Bore

+/- 2g weight Bottom of Bore to Ground: 915HL = 1.5”

800. 470. 0072 • W I SH O N G O L F. C O M

915 F/H 915F/H Allows Custom Fitting for Fairway Wood or Hybrid Iron Lengths

SPECIFICATIONS – 915F/H FAIRWAY HYBRIDS

• 915F/H Offers Two Weight Bores to enable assembly

within a 3” difference for fairway wood or hybrid club lengths • Full Forward Face Progression design offers the option

of a hybrid club that sets up with the look of a fairway wood • Narrow Sole to Turf Design allows less contact

between sole and turf for more consistency from fairway or rough conditions • Semi-Shallow 33mm Face Height is matched perfectly

to the head shape for lower CG and ease of play from any lie condition

Fairway Hybrids ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

915F/H–13

13°

130cc

13°

57°

0 square

208g

14”

GRT

14mm

RH/LH RH

915F/H–16

130

57.5

0 square

213

GRT

915F/H–18.5

18.5

130

18.5

0 square

218

GRT

915F/H–21

130

58.5

0 square

228

GRT

915F/H–24.5

24.5

130

61.5

0 square

232

GRT

DIMENSIONS – 915F/H FAIRWAY HYBRIDS Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Bore Depth

Face Thick.

13°

33mm

88mm

71mm

0.335”

12.3mm

28mm

Variable

0.335

12.3

Variable

18.5

0.335

12.3

Variable

0.335

12.3

Variable

24.5

0.335

12.3

Variable

Face Material: 17-4 Stainless Steel Body Material: 17-4 Stainless Steel Face Construction: Investment Cast Variable Thickness Weight Bores: 1) Hosel Weight Bore 2) 2nd Weight Bore on Sole

Bottom of Bore to Ground: 915F/H = 1.5” Ferrule Required: Yes, any TWGT wood standard ferrule with 12.3mm bottom OD Hand Select Options: +/- 1° loft, lie, face angle +/- 2g weight Scorelines: 0.8mm x 0.4mm deep

2nd Weight Bore

730 CL A Popular Full Set Design Expressly for Women or Men with an 80mph Swing Speed and Lower • Game Improvement Set Concept designed expressly

for golfers with a driver swing speed of under 80mph • 730CL Offers a Choice Between All Hybrid Irons or

All Conventional Irons, allowing the golfer to choose between all hybrid body irons or conventional irons to match with the 730 CL woods and wedges • Matching S2S Ruby Lite Graphite Shafts for sub-

80mph swing speed golfers, in discrete AA and A flexes (Page 74) • Loft Increments are Designed at 6° Between Clubs

– perfect for slower swing speed golfers to achieve normal 10-12 yard distance increments between each club

Set

SPECIFICATIONS – 730CL DRIVER ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

RH/LH

730-1

1-400

400cc

16°

56°

1 closed

205g

13”

GRT

17.5mm

SPECIFICATIONS – 730CL FAIRWAY WOODS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

Face Prog.

RH/LH

730

LONG Fairway

130cc

20°

56°

0.5 closed

218g

14”

0 Roll

12mm

730

HIGH Fairway

125

0.5 closed

228

0 Roll

SPECIFICATIONS – 730CL HYBRID IRONS/CONVENTIONAL IRONS/WEDGES ITEM #

Head

Loft

Lie

Weight

730-5

5-Hybrid Iron

30°

60°

254g

Offset Sole Angle Face Hgt. Toe Hgt. Heel Hgt. Blade Length RH/LH –1mm

0°

34mm

–

78mm

730-6/7

6/7-Hybrid Iron

270

–2

–

730-8/9

8/9-Hybrid Iron

283

–3

–

730-IR-5

5-Iron

254

–

53mm

33mm

730-IR-6/7

6/7-Iron

268

–

730-IR-8/9

8/9-Iron

282

–

730-PW

290

–

730-DW

300

–

• Available in RH in 16° driver, 20° and 26° fairway

woods, 30°, 36°, 42° hybrid irons or 30°, 36°, 42° conventional irons, and 48° and 54° wedges

Driver

Long Fairway

5-Hybrid

Ferrule Requirements: 730CL Driver - Any WD-Ti; 730CL Fairways/Hybrids/Irons - Any WD-Std; 730CL Wedges - Any IR (See Page 83)

800. 470. 0072 • W I SH O N G O L F. C O M

730CL iron design allows golfers to choose between a hybrid iron (lower image) or conventional iron option (below)

730CL intelligent set delivers more driver distance and more functional distance increments vs conventional set makeup (3 & 4 irons are unhittable for ≤80mph golfers) 2nd Weight Bore

Tac Trac Grip, Women’s

V-Series Red Grip, Men’s or Women’s Standard

S2S Ruby Lite Graphite Wood, Hybrid & Wedge Shafts

FUTUREPRO The Future Pro Stainless Steel Clubheads, Graphite or Steel Shafts With Grips Set Quality Standards for Starting Junior Golfers on the Right Path to Playing the Game • Future Pro Stainless Steel Wood and Ironheads offer

a quality alternative to cheap aluminum and zinc heads at a “parent friendly”, economical price • Future Pro Wood and Ironheads are Designed with

TWGT’s Hosel Weight Bore to allow proper weight fitting – Stainless Steel ironheads are easily bent for junior lie and loft fitting • Designed Primarily for Junior Players, Ages 6 to 11,

with increased loft to ensure early shotmaking success in the game • Optional Future Pro Steel or Graphite Shafts allow

clubmakers a wider range for shaft fitting and price consideration to the parents • Future Pro Dark Blue Finished Stainless Steel

Woodheads Available in #1 (15°), #3 (20°), #5 (25°) • Mirror Polish Stainless Steel Ironheads Available in #5

(32°), #7 (40°), #9 (48°), DW (54°)

Junior Set

SPECIFICATIONS – FUTURE PRO JUNIOR WOODHEADS ITEM #

Head

Volume

Loft

Lie

Face Angle

Weight

Bulge

Roll

805-1

Driver

250cc

15°

52°

0.5 hook

195g

12”

15”

805-3

3-wood

130

0.5 hook

204

805-5

5-wood

130

0.5 hook

213

SPECIFICATIONS – FUTURE PRO JUNIOR IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

RH/LH

855-5

5-Iron

32°

58°

248g

4mm

2°

855-7

7-Iron

262

2.5

855-9

9-Iron

276

855-DW

Dual Wedge

284

SPECIFICATIONS – FUTURE PRO JUNIOR GRAPHITE SHAFTS ITEM #

Model

Flex

Weight

Torque

Butt Diam.

Tip Diam.

Raw Length

Swing Speed

605-JR-Wood

Wood Shaft

70g

5.5°

0.500”

0.335”

40”

<50mph

605-JR-Iron

Iron Shaft

0.500

0.370

<50

SPECIFICATIONS – FUTURE PRO JUNIOR STEEL SHAFTS ITEM #

Model

Flex

Weight

Torque

Butt Diam.

Tip Diam.

Raw Length

Swing Speed

605-JR-WD-Steel

Wood Shaft

90g

3.7°

0.500”

0.335”

40”

<50mph

605-JR-IR-Steel

Iron Shaft

3.3

0.500

0.370

<50

Head Material- Woodheads:

Loft/Lie Bending:

17-4 Stainless Steel

Yes, +/- 2 to 3° in any direction for the Irons, Wedge and Putter

Head Material- Ironheads: 431 Stainless Steel Ferrule Required: Yes, model 124-WD-STD and 124-IR is recommended

RH/LH

Bore Diameter: 0.335” Woodheads; 0.370” Ironheads Bottom of Bore to Ground: FP Driver = 1.75”

Bore Depth:

FP Fairways = 1.25”

30mm in both the Wood and Ironheads

FP Irons = 1.5”

800. 470. 0072 • W I SH O N G O L F. C O M

Future Pro Heel/Toe Putter Head Available – Item# 255–PTR

Future Pro Grips Available in 0.500” Core in Regular and Putter Models

Note: Use any fairway wood headcover (pg. 85) for the Future Pro junior driver and any hybrid headcovers for the fairway woodheads

Future Pro Steel Shafts

Future Pro Graphite Shafts

TOM WISHON GOLF TECHNOLOGY DESIGNS ARE AVAILABLE FROM: USA, CANADA, UK & EUROPE Tom Wishon Golf Technology

EUROPE (France) Golf N Swing

EUROPE (Germany) Clubmate Golf

695 County Road 233

10/14 Avenue General LeClerc

Augustinusstrasse 9C

Durango, CO, USA 81301

Le Pecq, France 78230

Frechen, Germany, D-50226

Tel: 800-470-0072 (USA & Canada)

Tel: 33 139 161 860

Tel: 49 (0)6157 80366 40

Tel: 970-375-0411 (all other countries)

Email: golfnswing@gmail.com

Email: info@clubmategolf.com

Mon to Fri, 8AM to 4:30 PM, (MST/MDT)

Web: www.golfnswing.com

Web: www.clubmategolf.com

UNITED KINGDOM Diamond Golf International, Ltd.

ASIA (Malaysia, Singapore) JNG Malaysia SDN BHD

www.wishongolf.com

EUROPE (Sweden, Finland, Denmark, Norway) Wilprod Sportagenturer AB/Bromma Golf

U4/U5 Rudford Estate

No. 1; Jalan 3/116D Kuchai Entrepreneurs Park

AKvarnbacksvagen 28

Ford Road, Arundel

Bromma, Sweden 179-68

West Sussex, England, BN11 0BF

Tel: 46 827 1430

Tel: 44 (0)1903 726 999

Email: oskar@wilprod.se

Email: sales@diamondgolf.co.uk

Email: Nathan@jnggolf.com

Web: www.wilprod.se

Web: www.diamondgolf.co.uk

Web: www.jnggolf.com

EUROPE (Benelux Countries) European Golf Components BV

EUROPE (Germany, Austria, Switzerland) TCF Golf GBR

SOUTH AFRICA Golf Science Pty Ltd

Windmolenbosweg 1A

Siebenborn 28

Unit 6, Highway Park

Haelen, Netherlands, 6081-PE

Brey/Rhens, Germany, 56321

Northgate Estate, Brooklyn

Tel: 0475 510 747 or mobile 0653-375740

Tel: 49 (0)674 280 8491

Western Cape, South Africa, 7405

Email: info@egcbv.eu

Email: info@tcfgolf.com

Tel: 27 21 511 9066

Web: www.egcbv.eu

Web: www.tcfgolf.com

Email: warren.lake@golfscience.co.za

Kuala Lumpur, Malaysia, 58200 Tel: 60 37 980 0284

Web: www.golfscience.co.za

THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN

Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.