TWGT irons, hybrids & wedges for 2012 by Richard Kempton

Irons Hybrids Wedges

THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN

WISHONGOLF.COM

Hybrid & Iron Model Fitting Selection

NEW

979SS

Left Hand Models

IRONS

Game improvement design with high MOI and progressive blade height from shallow in the low loft irons to conventional in the short irons and wedges. Fully CNC Milled Face for enhanced spin with medium sole width. Available in RH and new in LH in #4 – 9, AW, PW and SW.

870Ti

NEW

IRONS

Thin, CNC machined Titanium face offers 0.830 COR performance for more distance than any other conventional irons of the same lofts. Lightweight Titanium CNC Machined variable thickness face offers the best off-center hit forgiveness. Available in RH in #3 – 9, PW, AW, SW.

NEW

765WS IRONS

752TC

New for 2012, the 765WS strong loft irons offer a wide sole design which ensures a low CG but plays like a more narrow sole because of the strong leading edge bevel with very low bounce and a raised trailing edge. Available in RH in #4 – 9, PW, AW.

The 752TC irons are a deep cavity back design with a more compact blade length and a strongly beveled leading and trailing edge sole design, designed with progressive offset from medium in the long irons to low in the short irons. Available in both RH and LH. RH in #3 – 9, PW, AW, SW. LH in #3 – 9, PW, SW.

[page 34]

[page 38]

575 MMC FORGED IRONS

IRONS

Elevating the technology of a forged carbon steel iron, each head in the new 575MMC mixed cavity and muscleback set of irons is created by fully CNC machining a progressive cavity back to muscle back design. Available in RH in #3 to 9, PW and AW. [page 42]

[page 36] [page 40]

Iron Model Comparison Chart Rank

Head Size

Top Line Width

Off-Center Forgiveness

Shot Distance

(largest to smallest)

(widest to most narrow)

(most to least forgiving)

(longest to shortest)

1st

870Ti

752TC

870Ti

2nd

765WS

979SS

560MC

765WS

3rd

560MC

765WS

979SS (tie)

979SS

4th

752TC

870TI

765WS (tie)

752TC

5th

555C

560MC

752TC

575MMC

6th

979SS

575MMC

555C

560MC

7th

555M

555C

555M

555C

8th

575MMC

555M

575MMC

555M

Based on toe height and blade length measurements

Range is from 8mm to 3.75mm

Based on 1” off-center hit at 75mph clubhead speed

Based on Robot Hit Testing of the 5-iron

800. 470. 0072 • W I SH O N G O L F. C O M

Specialty Sets

NEW Cosmetics

560 MC FORGED IRONS

555 C FORGED IRONS

555 M FORGED IRONS

TWGT’s CNC machined, deep cavity back forged carbon steel 560MC irons present a new and more modern cosmetic appearance for 2012, but still offer the superb off-center hit performance that has impressed golfers since their introduction. Available in RH in #3 – 9, PW and AW.

A classic traditional medium deep cavity back design, the 555C forged irons are a true player’s cavity back design with tour grind radius sole and low offset through the set which are also perfect for a custom set makeup with the 555M forged muscleback irons. Available in #2 – 9, PW, AW, SW.

Wishon Golf’s muscleback forged iron, featuring a compact profile shape with tour grind radius sole. The 555M can be played as a full muscleback design or in a mix and match set makeup with the 555C forged cavity back irons. Available in #3 – 9, PW, AW and SW.

[page 44]

[page 46]

730CL

IRONS

FUTURE PRO JR.

IRONS

[page 24]

[page 26]

Hybrids

[page 46]

Vertical CG

Sole Width

Hosel Offset

(lowest to highest)

(widest ot most narrow)

(most to least)

979SS

765WS

752TC

555M

979SS

765WS

575MMC

870Ti

555C

752TC

979SS

765WS

560MC

575MMC

560MC

575MMC

555C

870TI

555C

555M

752TC

555M

560MC

Based on 5-iron, with Range from 17.75mm to 21.5mm

Based on Center of Sole, with Range from 22.5mm to 16.5mm

Range is from 5mm to 2mm; Note some models are progressive offset design

775 HS FAIRWAY HYBRIDS [page 30]

331 H FAIRWAY HYBRIDS [page 32]

775 HS A Modern Hybrid Design with Thin Face, High COR Performance and a Unique Soft Stainless Steel Hosel for a Wide Range of Lie and Face Angle Fitting Options

SPECIFICATIONS – 775HS HYBRID IRONS

• Thin, High COR, High Strength HS 350 Alloy Face delivers a higher ball velocity for more distance in a modern hybrid head design.

DIMENSIONS – 775HS HYBRID IRONS

• Unique 304 Grade Stainless Steel Hosel offers very easy bending adjustments to customize the lie angle and face angle to custom fit a much wider range of golfers. • 775HS Hybrids are Designed with a Split-Level, Narrowed Primary Sole Width for more consistent shotmaking from both fairway or rough conditions. • 775HS Hybrid Face Progression is in between an iron and a fairway wood to offer an appearance that generates more confidence with the shot. • 0.335” Hosel Bore Diameter of the 775HS Hybrids is designed to match with either the S2S White or S2S Black Hybrid shaft designs to ensure a high flight trajectory for more distance and a softer landing on the greens.

Hybrid Irons

ITEM #

Head

Loft

Lie

Weight

Offset

Bulge

Roll

775-2

2-iron/hybrid

18°

58°

232g

16mm

16”

RH/LH RH

775-3

3-iron/hybrid

239

RH/LH

775-4

4-iron/hybrid

246

775-5

5-iron/hybrid

253

775-6

6-iron/hybrid

61.5

260

Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

Face Thick

775-2

34mm

84mm

62mm

0.335”

13.2mm

1.70mm

775-3

0.335

13.2

1.65

775-4

0.335

13.2

1.65

775-5

0.335

13.2

1.65

775-6

0.335

13.2

1.60

Head/Body Material:

Weight Bore:

17-4 Stainless Steel

#1 – Hosel Weight Bore 7.5mm x 15mm (capy. 9g)

Hosel Material:

#2 – Sole Weight Bore 7.5mm x 15mm (capy. 9g)

304 Stainless Steel

Hosel Length/Bore Depth:

Face Material:

60mm/30mm

HS 350 High Strength Steel Ferrule Required:

• New for 2012 is the 775HS #6 Hybrid to allow golfers to extend the higher performance of the 775HS design deeper into their overall iron set makeup.

Yes, any TWGT Wood Standard ferrule with

• Available in RH in #2, 3, 4, 5, 6 and in LH in #3. Finished in an attractive black gloss with red highlights and mirror polish sole. All 775HS hybrids are designed with two weight bores to expand fitting options for length, shaft weight and swingweight.

CNC Engraved, 0.8mm wide x 0.2mm deep;

13.2mm bottom OD Scorelines:

Lie/Face Angle Bending: +/-4º in all directions Note: Perform bending only in a metal wood type bending machine or request TWGT custom bending service

Bottom of Bore to Ground: 775HS = 1.5”

#5 with new USGA scorelines

800. 470. 0072 • W I SH O N G O L F. C O M

775HS hybrids match perfectly with either the lightweight S2S White Hybrid or the heavier weight S2S Black Hybrid shafts

NEW

#6 HYBRID AVAILABLE

2nd Weight Bore

UNIQUE DESIGN WITH BENDABLE HOSEL

775HS #5 & #6 Produced with New USGA Scoreline

331 H With Twin Weight Bores and a Classic Hybrid Shape and Profile the 331H Hybrids are TWGT’s Most Popular Hybrid Iron Design • Higher MOI for Greater Off-Center Hit Performance

from increased side and back wall thickness • Split-Level Sole Design reduces the sole to ground

contact to allow more solid contact from the rough and to allow players to “knock the ball down” • Designed to be Built to a Wide Range of Lengths

through the use of the second weight bore, total weight addition capability 18grams • Similar Hosel Offset Design as an Iron to blend

in more smoothly with the typical low offset of any conventional iron design • Increased Hosel Length to allow for slightly easier lie

bending adjustments • 0.335” Bore Diameter to Match with TWGT’s 0.335”

S2S White (72g) and Gold Tour (95g) Hybrid Shafts

Hybrid Irons

SPECIFICATIONS – 331H HYBRID IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Bulge

Roll

331-2

2-iron/hybrid

18°

58°

235g

10mm

16”

RH/LH RH

331-3

3-iron/hybrid

242

RH/LH

331-4

4-iron/hybrid

249

RH/LH

331-5

5-iron/hybrid

256

331-6

6-iron/hybrid

263

DIMENSIONS – 331H HYBRID IRONS Head

Face Height

Face Width

Front-Back

Bore Diam.

Hosel OD

T/H Sole Radius

331-2

30mm

86mm

55mm

0.335”

12.3mm

100mm

331-3

0.335

12.3

100

331-4

0.335

12.3

100

331-5

0.335

12.3

100

331-6

32.5

0.335

12.3

100

Head Construction:

Hosel Length:

2-piece with custom wall

70mm for all 331H hybrid heads

thickness engineering

Bore Depth:

Head/Body Material:

30mm for all 331H hybrid heads

Investment Cast 17-4

Swingweight Bore: Twin Weight Bores:

Stainless Steel

#1 – Hosel Weight Bore- 7.5mm x 15mm,

Ferrule Required:

#2 – Sole Weight Bore- 7.5mm x 15mm

Yes, any TWGT Wood Std Ferrule with

Hosel OD: 12.3mm

12.3mm bottom OD and 0.335” bore Scorelines: U-Groove Lie/Face Angle Bending:

Toe to Heel Sole Radius: 250mm radius Bottom of Bore to Ground: 331H = 2”

+/- 2º in any direction

800. 470. 0072 • W I SH O N G O L F. C O M

331H hybrid ironheads perform well with S2S White hybrid or S2S Black hybrid shafts

2nd Weight Bore

331H #5 & #6 Produced with New USGA Scoreline

979 SS An Original Game Improvement Investment Cast Stainless Iron Design with High MOI, Progressive Blade Height, Semi-Wide Sole and CNC Milled Face • Progressive blade height design graduates through

the set from semi-shallow low CG on the long irons to conventional blade height on the short irons

PRODUCED WITH NEW USGA SCORE LINES

Irons

SPECIFICATIONS – 979SS IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Heel Height

Blade Length

979-3

3-iron

20°

59°

238g

3.5mm

Sole Angle Toe Height 2°

50mm

31mm

82mm

RH/LH RH

979-4

4-iron

245

51.5

RH/LH

979-5

5-iron

252

2.5

RH/LH

979-6

6-iron

61.5

259

2.5

RH/LH RH/LH

979-7

7-iron

266

2.5

56.5

979-8

8-iron

273

35.5

RH/LH

979-9

9-iron

280

36.5

RH/LH

979-PW

282

RH/LH

979-AW

282

979-SW

298

• CNC milled face with NEW USGA conforming scorelines

delivers enhanced spin • Semi-Wide, symmetrical width sole design with face-

to-back radius and blunt leading edge achieves the most game improvement for clean, solid contact through all grass/turf conditions • Undercut back cavity combines with semi-wide sole to

keep CG lower for more game improvement launch angle assistance • Twin Weight Bores allow for a maximum headweight

addition of 15g to satisfy any combination of custom length and shaft weight fitting considerations • Precision investment cast from 431 stainless steel for

ease in loft/lie bending, finished in a bright satin finish with attractive cosmetic highlights. Available in RH in #3PW, AW, SW and in LH in #4-PW

Head Material:

Bore Diameter: 0.370”

Investment Cast 431 Stainless Steel

Sole Width Range:

Ferrule Required:

#3–5 - 20mm/22mm/17.5mm

Any IR ferrule with 13.2mm bottom

#6–8 - 20.5mm/22.5mm/17.5mm

OD and 0.370” ID

#9–wedges - 21mm/23mm/18mm

Scorelines:

Toe/Heel Leading Edge Radius:

U-Groove 0.8mm wide x 2.6mm

#3–8 - 250mm

spacing x 0.35mm deep;

#9, PW, AW - 275mm

conforms to new USGA scoreline rule

#SW - 300mm

Loft/Lie Bending:

Face-Back Sole Radius:

+/-2° in any direction

#3–6 - 60mm/50mm

Hosel Length: 65mm

#7–AW - 70mm/60mm

Hosel Weight Bore: 7.5mm diam. x 15mm deep Lower Back Cavity Weight Bore:

#SW - 90mm/80mm Bottom of Bore to Ground: 979SS = 1.5”

7.5mm diam x 11mm deep Bore Depth: 30mm

800. 470. 0072 • W I SH O N G O L F. C O M

Deep undercut back cavity design pushes mass down to lower the Center of Gravity more

TWGT achieves another design breakthrough with the first full set of irons with all milled faces for spin enhancement

2nd Weight Bore

NEW

LEFT HAND AVAILABLE

870 Ti The Ultimate in High Performance, High COR, Supreme Off-Center Hit Forgiveness in Iron Design Today • Forged, CNC Machined, Variable Thickness Beta-

Titanium Face Design achieves an actual 0.830 COR for the highest possible ball speed from an iron

• Thinner, Beta-Titanium Face Design allows more weight

to be removed from the face to be positioned on the toe and heel areas to increase the MOI of the head for even better off-center hit performance • CNC Machined, Variable Thickness Face allows the

highest level of off-center hit performance possible in an iron design • Slightly Oversize Head Shape and Profile automatically

increases the MOI over more traditional iron head sizes to add even more forgiveness to the off-center hit capability of the 870Ti • Reduced-Offset Hosel Design allows a wider range of

players to benefit from the super high performance design characteristics of the 870Ti • Fully Radiused Sole Grind with Beveled Leading Edge

provides the most playability for all levels of golfers from all types of turf conditions

PRODUCED WITH NEW USGA SCORE LINES

Irons

SPECIFICATIONS – 870Ti IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

Toe Hgt.

Heel Hgt.

Blade Length

RH/LH

870-3

3-iron

18°

59°

239g

4mm

1°

54mm

32mm

82mm

870-4

4-iron

246

3.5

870-5

5-iron

253

33.5

870-6

6-iron

61.5

260

2.5

870-7

7-iron

267

2.5

34.5

870-8

8-iron

274

35.5

870-9

9-iron

42.5

281

870-PW

284

870-AW

51.5

284

870-SW

298

Head/Body Material:

Bore Depth: 30mm

Investment Cast, 17-4 Stainless

Bore Diameter: 0.370” parallel

Face Material:

Sole Width Range at Toe/Heel:

SP700 Forged Beta Titanium

#4-iron: 19mm/15.5mm;

Ferrule Required:

#7-iron: 19.5mm/15.5mm;

Any IR ferrule with 13.2mm bottom OD and

PW: 20mm/16mm

0/370” ID

Toe/Heel Leading Edge Radius:

Scorelines:

#3-AW: 275mm Radius;

U-Groove; 0.75mm wide X 0.4mm deep X

SW: 250mm Radius

2.6mm spacing, CNC machined

Face to Back Sole Radius:

Loft/Lie Bending:

40mm Toe/50mm Heel

+/-2° in any direction

Bottom of Bore to Ground:

Hosel Length: 65mm

870Ti = 1.5”

800. 470. 0072 • W I SH O N G O L F. C O M

870Ti ironheads perform well with S2S White & Black 85 iron shafts

870Ti 5-iron

870Ti 3-iron is a superb driving iron

765 WS A Wide Sole Game Improvement Design with the Versatile Turf Playability of a More Narrow Sole and the Low Center of Gravity of a Wide Sole • A Wide Sole Design for Any Golfer – the strongly beveled leading edge combines with a very low bounce and raised rear sole surface to be a proper sole fit to any golfer, from downward to upward angle of attack • Wide Playable Sole Puts More Weight Low to keep the center of gravity lower to help golfers hit the ball up to fly • Modern Strong Loft Design is offset by the wide sole/low center of gravity to help golfers hit the lower loft 765WS ironheads more easily up in the air than other strong loft iron models • Rear Undercut Lower Cavity Slot helps move more mass back from the face to also help get the ball up more easily • Precision Investment Cast from 431 Stainless Steel for ease in loft/lie bending, finished in a bright satin polish with modern back cavity medallion. Available in RH in #4 – 9, PW, AW.

NEW

Irons

SPECIFICATIONS – 765WS IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

Toe Hgt.

Heel Hgt.

Blade Length

RH/LH

765-4

4-iron

20º

60º

246g

5mm

1º

53.5mm

34mm

81mm

765-5

5-iron

253

54.5

765-6

6-iron

260

55.5

765-7

7-iron

267

55.5

765-8

8-iron

274

56.5

37.5

765-9

9-iron

281

57.5

765-PW

44.5

284

57.5

765-AW

284

57.5

Head/Body Material:

Bore Depth:

Investment cast from 431 Stainless Steel

30mm

Ferrule Required:

Bore Diameter:

Any IR type ferrule with 13.2mm bottom

0.370”

OD and 0.370” ID

Sole Width Range:

Scorelines:

#4-iron: 22mm;

U-Groove 0.8mm wide x 2.6mm spacing x

#9-iron/AW/PW: 27mm (at center)

0.35mm deep under new USGA

Toe to Heel Sole Radius:

scoreline rule

#4 – AW = 250mm Radius

Loft/Lie Bending:

Face to Back Sole Radius:

+/-2º in any direction

80mm Radius

Hosel Length:

Bottom of Bore to Ground:

60mm

765WS = 1.5”

800. 470. 0072 • W I SH O N G O L F. C O M

The heavily beveled leading edge prevents digging for players with a downward angle of attack while the low bounce sole angle and angled up rear sole allows the sole to perform well on firm turf as well as for golfers who release the club early.

Deep rear undercut slot combines with sole width to push CG back from the face

752 TC Compact, Traditional Head Shape and Profile in a Deep Cavity Back, Full Game Improvement Iron Design • Beveled Leading/Trailing Edge Sole with face to back

radius affords fewer ‘fat’ shots and easier play from the rough • Classic, Compact, Traditional Shape and Profile

is blended well with the deep cavity back, full game improvement features on each head • Angled Back Cavity Side Walls for higher MOI delivers

very solid off-center feel performance • Progressive Lower Back Weighting allows CG to be

lower and farther back on the lower loft irons for higher flight, removed on short irons for normal flight • Brilliant, Mirror Polish Finish with matte finish bead

blast back cavity • Set Make Up Available:

RH #3–9, PW, AW, SW LH #3–9, PW, SW

PRODUCED WITH NEW USGA SCORE LINES

Irons

SPECIFICATIONS – 752TC IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

Toe Hgt.

Heel Hgt.

Blade Length

RH/LH

752-3

3-iron

752-4

4-iron

21°

60°

239g

5.5mm

1°

55mm

34mm

79mm

RH/LH

60.5

246

34.5

752-5

RH/LH

5-iron

253

4.5

35.5

RH/LH

752-6

6-iron

61.5

260

57.5

RH/LH

752-7

7-iron

267

3.5

36.5

RH/LH

752-8

8-iron

62.5

274

3.0

RH/LH

752-9

9-iron

281

2.5

59.5

37.5

RH/LH

752-PW

63.5

284

2.5

RH/LH

752-AW

284

2.5

38.5

752-SW

298

RH/LH

Head/Body Material:

Bore Diameter:

Investment cast from 431 Stainless Steel

0.370” parallel

Ferrule Required:

Sole Width Range:

Any IR ferrule with 13.2mm bottom OD

#3-iron: 17.5/16/13.5;

and 0.370” ID

#6-iron: 18/16.5/14;

Scorelines: U-Groove, 0.8mm wide X

#9-iron: 19.5/18/15

2.8mm spacing X 0.4mm deep

Face to Back Sole Radius:

Loft/Lie Bending:

#3–6 = 50mm; #7–PW = 60mm;

+/-3° in any direction

#AW, SW = 70m

Bore Depth:

Toe/Heel Leading Edge Radius:

30mm on all 752TC ironheads;

#3–7 = 300mm;

TWGT Weight Bore in all 752TC heads

#8–SW = 350mm

for final swingweighting

Bottom of Bore to Ground:

Hosel Length:

752TC = 1.5”

60mm

“The fact that the 752TC irons have been a part of the TWGT original design line since 2003 is sheer proof of how many golfers have been pleased with this design for so long.” 40

– Matt Mohi, Lead Clubfitter, TWGT 800. 470. 0072 • W I SH O N G O L F. C O M

752TC 7-iron

752TC 6-iron

AVAILABLE IN RIGHT HAND & LEFT HAND

575 MMC A Combined Progressive Cavity and Muscleback Forged Design with each Back Design Fully Made by Precision CNC Machining • TWGT Designed the First Forged Iron Created by CNC Machining – the new 575MMC machined muscle cavity irons take the precision of a CNC Machined forged iron to a higher level. • Mixed Muscleback and Cavity Back Forged Design created for better players who prefer a more compact profile. • Cavity Back in the Long and Mid Irons for moderate off-center hie forgiveness with blade muscleback design in the short irons. • Progressive Weight Design extends throughout the full set – the CNC Machined cavity on the #3 to 7 irons gradually moves weight from a low to mid cavit y level. The CNC Machined muscleback progresses the back weight from mid to higher. • The 575MMC #8-Wedges are First CNC Machined Muscleback Irons ever created in the industry for precision in CG and weight distribution. • All New CNC Machining Pattern Technology results in a beautiful milled surface texture. 575MMC available in RH in cavity back #3 - #7 with muscleback #8 – Wedges.

NEW

Forged Irons

SPECIFICATIONS – 575MMC IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

Toe Hgt.

Heel Hgt.

Blade Length

RH/LH

575-3

3-iron

20º

239g

2mm

1º

52mm

29mm

77mm

575-4

4-iron

59.5

246

575-5

5-iron

253

575-6

6-iron

260

575-7

7-iron

267

32.5

575-8

8-iron

274

575-9

9-iron

281

575-PW

284

575-AW

284

Head Material:

Sole Width Range:

Forged 1035C Carbon Steel

#3-iron: 18mm/17mm/13mm;

Ferrule Required:

#6-iron: 19.5/18.5/14.5;

Yes, model #125-IR

#9-iron: 18.5/17.5/15

Scorelines:

Face to Back Sole Radius:

CNC Machined U-Groove, 0.8mm wide x

#3 – 7 = 40mm/30mm;

2.6mm spacing x 0.35mm deep, new

#8 – AW = 60mm/50mm Toe/Heel

USGA form

Toe/Heel Leading Edge Radius:

Loft/Lie Bending:

:#3 – 7 = 250mm;

+/-4º in any direction

#8 – AW = 200mm

Hosel Length/Bore Depth:

Bottom of Bore to Ground:

60mm/30mm

575MMC = 1.5”

Bore Diameter: 0.370”

800. 470. 0072 • W I SH O N G O L F. C O M

575mmc 5-iron

575mmc 5-iron and 8-iron

575mmc 5-iron

The 575MMC CNC machined back design graduates from cavity back with the lowest weight ledge on #3 to cavity back with the tallest weight ledge on #7, to the progressive muscleback wieghting on the #8 to wedges.

ALL 575MMC BACK DESIGNS CREATED BY CNC MACHINING 43

560 MC Forged Carbon Steel + CNC Machined Deep Back Cavity for the Highest MOI in a True Forged Iron Design

PRODUCED WITH NEW USGA SCORE LINES

Forged Irons

SPECIFICATIONS – 560MC IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

Toe Hgt.

Heel Hgt.

Blade Length

RH/LH

560-3

3-iron

21°

59°

240g

2.5mm

2°

55mm

30.5mm

82mm

560-4

4-iron

247

2.5

RH RH

560-5

5-iron

254

560-6

6-iron

61.5

261

57.5

560-7

7-iron

268

560-8

8-iron

275

• A True Design Technology Advancement – creating the

560-9

9-iron

282

59.5

entire back cavity by CNC machining results in a much higher MOI for superb off-center hit performance with the soft feel of a forged carbon steel iron

560-PW

47.5

285

1.5

560-AW

285

1.5

• True Tour Radiused Sole perfectly blends a face to

back sole radius with a heavily radiused leading edge for reducing ‘fat’ shots and more solid impact from the rough • Slightly Larger Head Size contributes to the much

higher MOI and more confidence without looking too large • Middle Handicap Players can Benefit from the 560MC

Forging thanks to the combination of deep cavity, high MOI and tour radiused sole • Double Nickel Chrome Satin Plating finish with

glass bead blast highlights makes the 560MC a truly gorgeous iron design

Head Material:

Bore Diameter:

Forged 1035C Carbon Steel

0.370”

Ferrule Required:

Sole Width Range:

Model #125-IR

#3-iron: 17.5/19.5/14.5;

Scorelines:

#6-iron: 17.5/18.5/14.5;

U-groove; 0.8mm wide X 2.6mm spacing X

#9-iron: 21/18.5/15;

0.4mm deep, CNC Machined

Face to Back Sole Radius:

Loft/Lie Bending:

50mm toe/40mm heel all irons

+/-4º in any direction

Toe/Heel Leading Edge Radius:

Hosel Length:

#3–9 iron- 300mm radius

60mm

PW, AW- 350mm radius

Hosel Weight Bore:

Bottom of Bore to Ground:

7.5mm dia. x 15mm deep

560MC = 1.25”

Bore Depth: 30mm

“Now that the 560’s have been out for a few years, based on the comments of clubmakers and golfers combined with my own feelings from having personally played them for the past five years, I do believe the 560mc is the finest low to middle handicap player’s iron model I have ever had the pleasure of designing.” –Tom Wishon 44

800. 470. 0072 • W I SH O N G O L F. C O M

560MC 5-iron

555 C

Two Traditional Profile, Forged Carbon Steel Cavity and Muscleback Classic Iron Designs, Created to be Played Separately or in Mix and Match Combination • 555C Cavity Back Forged Carbon Steel Irons are a classic design with moderate off-center hit forgiveness • 555M Muscleback Forged Carbon Steel Irons are a traditional blade design for low handicap players • 555C and 555M Irons were Designed Side-by-Side to allow a mix-and-match set makeup to ensure the same appearance in the playing position for each head through the set • Full Face to Back Radius Sole Grind with heavily radiused leading edge to deliver top performance from lies in the fairway or rough • Thin Topline, Low Offset and Classic Profile make the 555C and 555M designs admired by all discerning golfers • True 5-Step Forged from 1035 Soft Carbon Steel to deliver greater production shape/grind consistency and fully uniform internal grain structure for soft feel • Double Satin Nickel/Chrome Plating Finish with glass bead blast highlights for the highest quality appearance and durability

555 M

PRODUCED WITH NEW USGA SCORE LINES

Forged Irons

SPECIFICATIONS – 555C IRONS & 555M IRONS ITEM #

Head

Loft

Lie

Weight

Offset

Sole Angle

Toe Hgt.

Heel Hgt.

Blade Length

RH/LH

555C

2-iron

18º

58º

232g

3.5mm

1º

52mm

30.5mm

79mm

555C/555M

3-iron

239

3.5

77mm

555C/555M

4-iron

246

555C/555M

5-iron

253

555C/555M

6-iron

61.5

260

2.5

RH RH

555C/555M

7-iron

267

2.5

555C/555M

8-iron

274

555C/555M

9-iron

281

555C/555M

284

555C/555M

284

555C/555M

296

Head Material:

Hosel Length/Bore Depth/Bore Diameter:

Forged 1035C carbon steel

60mm/30mm/0.370”

Ferrule Required:

Bottom of Bore to ground:

Yes, model #125-IR

555C/555M = 1.25”

Scorelines: CNC Machined U-Groove 0.8mm wide x 2.6mm spacing x 0.4mm deep Loft/Lie Bending: +/-4º in any direction

555C & 555M ARE DESIGNED TO MATCH PERFECTLY FOR TRUE CUSTOM MIXED SET MAKEUP

• 555C available in RH only #2-9, PW, AW, SW. 555M available in RH only #3-9, PW, AW, SW

800. 470. 0072 • W I SH O N G O L F. C O M

555C & 555M 6-iron

555C 6-iron

555M 8-iron

555C 555M 47

MICRO-GROOVE HM The Ultimate in Wedge Design New Micro-Grooves with Horizontal Face Milling in a Soft Carbon Steel, Classic ‘Tear-Drop’ Profile with Medium-Wide Sole • Classic Tear-Drop Profile Shape with Medium Sole Width offers golfers the most popular and traditional shape in wedge design • New Micro-Groove Scoreline Design with Horizontal Milling in between the lines creates more friction on the ball at impact for enhanced spin performance • ‘Blade-on-Blade’ Back Design allows a slightly higher CG for more solid feel and better performance on higher face impacts that can occur when the ball sits up in the grass

NEW

Wedges

SPECIFICATIONS – MICRO-GROOVE HM WEDGES Sole Angle

Toe Height

Heel Height

Blade Length

2mm

6º

60mm

36mm

82mm

296

19/21/14

70/50

RH/LH

292

19/21/14

70/50

ITEM #

Head

Loft

Lie

Weight Offset

304-52

52º

64º

283g

304-56

304-60

Sole Width T/H/C

Sole Radius T/H

18mm/20mm/13mm 70mm/50mm

Head Material:

Hosel Length:

Investment Cast 8620 Carbon Steel

60mm

Ferrule Required:

Hosel Weight Bore:

Any 0.370” IR ferrule with 13.2mm bottom OD

7.5mm dia. x 15mm deep

Scorelines:

Hosel Length/Bore Depth/Bore Diam:

Micro-Groove U-shape, 0.6mm x 2.3mm x

65mm/30mm/0.370”

0.4mm; Horizontal Milled

Bottom of Bore to Ground:

Loft/Lie Bending:

Micro-Groove HM Wedges = 1.5”

RH/LH RH

+/-4º in any direction

• Investment Cast from 8620 Carbon Steel for soft feel • Beautiful Pearl Chrome Plating delivers a very striking and highly durable finish, available in RH in 52º Approach Wedge, 56º Sand Wedge and 60º Lob Wedge. LH in 56º Sand Wedge.

800. 470. 0072 • W I SH O N G O L F. C O M

CNC Milling with Micro-Grooveâ&#x201E;˘ Scorelines

Micro-Groove HM Classic Tear-Drop Profile Shape

Micro-Groove HM Full Radius Sole Design

Micro-Groove HM Low Offset Design

PCF

Micro Tour & Wide Sole Wedges

TWGT’s Traditional Sole Wedge Design with Milled Face and Micro-Groove™ Scorelines, Destined to Become a Classic • Traditional Sole, Classic Shape/Profile stands as the finest overall shape and set-up behind the ball in a TWGT original wedge design • CNC Milled Face with Micro-Groove™ Scorelines to fully maximize every golfer’s ability to spin the ball. Tests with Trackman™ launch monitor verify a 1000 rpm increase in spin rate compared to typical U-groove scorelines on bead blast face • Zero-Bounce Grind Heel ensures the leading edge remains low to the ground when the face is rolled open for finesse shots • Available in Satin Chrome & Platinum Nickel Plating Finishes, with an assortment of models in LH

SPECIFICATIONS – PCF MICRO TOUR TRADITIONAL SOLE WEDGES ITEM #

Head

Loft

Lie

307-52

52º

64º

Sole Angle

Toe Height

Heel Height

Blade Length

Sole Width T/C/H

2mm

5/0º

59mm

35.5mm

80mm

18mm/19mm/ 14mm

Weight Offset 284g

Sole Radius RH/LH T/H 275mm R

307-56

300

12/0

59.5

19/20/14.5

250

RH/LH

307-60

SW/LW

295

8/0

59.5

19/20/14.5

250

*Note: First number is the primary sole angle. Second number is the zero-bounce grind sole on the heel side.

SPECIFICATIONS – PCF WIDE SOLE WEDGES ITEM #

Head

Loft

Lie

306WS-55

55°

64°

300g

298

306WS-60 SW/LW

Sole Angle

Toe Height

Heel Height

Blade Length

Sole Width T/C/H

2mm

5°

58.5mm

35mm

80mm

28.5mm/32mm/ 23.5mm

275mm R

RH/LH

59.5

28.5/32/23.5

250

Weight Offset

Sole Rad ius RH/LH T/H

CNC Milling with Micro-Groove™ Scorelines

PCF Micro Tour Wedges in Satin Chrome

Zero Bounce Heel - PCF Micro Tour Wedges

PCF Micro Tour Wedges in Platinum Nickel

800. 470. 0072 • W I SH O N G O L F. C O M

TWGT Wedge Shafts SHAFTS Wedges • TWGT has Created a Pair of Custom Designed Steel

Wedge Shafts For Golfers Who Desire a Custom Flight and Feel Option in Their Wedges • High Flight wedge shaft is designed with a longer tip

parallel section to allow a slightly higher, softer landing shot into the green • Knock Down wedge shaft is designed with a very short

PCF Wide Sole Wedges

parallel tip section to restrict the bending of the tip to allow golfers to hit knock-down shots with a firmer feel on a more driving trajectory

Low Bounce Wide Sole Design

Head Material:

Bore Depth:

Investment Cast 304 Stainless Steel

35mm

Ferrule Required: Any iron ferrule

Bottom of Bore to Ground:

with 13.2mm bottom OD

PCF Wedges = 1.5”

OPTIONS & SPECIFICATIONS – STEEL WEDGE SHAFTS

Scorelines: Micro-Groove™ U-shaped,

ITEM #

Description

Butt Dia.

605-WG-KD

Knock Down Wedge Shaft

0.580”

0.370”

105g

605-WG-HF

High Flight Wedge Shaft

0.580

0.370

105

Tip Trim

Butt Trim

36”

0”

To length

Tip Dia. Wgt Length

0.6mm x 2.0mm x 0.4mm; CNC Machined Loft/Lie Bending: +/-4º loft or lie Weight Bore: 7.5mm dia. x 15mm deep

PCF Wide Sole Wedge in Satin Chrome

304 STAINLESS STEEL HAS THE SAME HRB85 HARDNESS AS CARBON STEEL

PCF Wide Sole Wedge in Platinum Nickel

GIANT NIBLICK A Unique Design For Fun – But Also for Full Game Improvement Playability Proving that TWGT can push the envelope and think completely outside the box when it comes to clubhead design, the hugely oversize Giant Niblick is a sand wedge designed to be fully playable as well as a definite conversation piece. The Giant Niblick is truly a unique design that when any golfer sees it, will elicit an “I have to have one of these” response!

Sand Wedge

SPECIFICATIONS – GIANT NIBLICK SAND WEDGE ITEM #

Head

Loft

Lie

308-58-RH

58º

64º

Weight Offset 300g

2mm

Sole Angle

Toe Height

Heel Height

Blade Length

2º

87mm

53.5mm 130mm

Sole Width T/H/C 45/41/34

Head Material:

Bore Depth:

Investment Cast 6061 Aluminum

40mm

Ferrule Required:

Bottom of Bore to Ground:

15mm x 25mm ferrule is included with

Giant Niblick Sand Wedge = 2.5”

each Giant Niblick wedge

Loft/Lie Bending:

• Almost Three Times the Size of a Conventional Sand Wedge, the Giant Niblick is designed to be a playable sand wedge to blast the ball out of any bunker

Scorelines:

While the Giant Niblick can be bent +/-

0.8mm wide X 0.4mm deep x 3.0mm

2º, we do not recommend it because

spacing, U-Groove shape, CNC

of the potential severity of marring the

• Precision Investment Cast from High Grade 6061 Aluminum with fully CNC engraved scorelines

engraved CNC Machined

6061 Aluminum alloy

• Ultra-Wide Sole Fully Radiused with 2º Bounce, designed to be completely playable from sand or tall grass for its massive sole width

Weight Bore: 15mm deep x 7.5mm dia, located at the bottom of the hosel bore

• 58º Loft Combines with Center of Gravity to play like a traditional 56º sand wedge • Designed for Fun, or For Any Golfer Searching for the Answer from the Sand – just swing completely through the ball and it will fly surely on the green • Conventional U-Groove Scorelines are not intended to be conforming to the new USGA scoreline rule; yet every other feature of the Giant Niblick does follow the Rules of Golf

Giant Niblick shown to scale with PCF Wedge

Giant Niblick shown to scale with Golf Ball

• Finished in Bright Satin Polish with Clear Anodized Coating with glass bead blast face prevents glare and withstands excessive wear on the sole

800. 470. 0072 • W I SH O N G O L F. C O M

TOM WISHON GOLF TECHNOLOGY DESIGNS ARE AVAILABLE FROM: USA, CANADA, UK & EUROPE Tom Wishon Golf Technology

EUROPE (France) Golf N Swing

EUROPE (Germany) Clubmate Golf

695 County Road 233

10/14 Avenue General LeClerc

Augustinusstrasse 9C

Durango, CO, USA 81301

Le Pecq, France 78230

Frechen, Germany, D-50226

Tel: 800-470-0072 (USA & Canada)

Tel: 33 139 161 860

Tel: 49 (0)6157 80366 40

Tel: 970-375-0411 (all other countries)

Email: golfnswing@gmail.com

Email: info@clubmategolf.com

Mon to Fri, 8AM to 4:30 PM, (MST/MDT)

Web: www.golfnswing.com

Web: www.clubmategolf.com

UNITED KINGDOM Diamond Golf International, Ltd.

ASIA (Malaysia, Singapore) JNG Malaysia SDN BHD

www.wishongolf.com

EUROPE (Sweden, Finland, Denmark, Norway) Wilprod Sportagenturer AB/Bromma Golf

U4/U5 Rudford Estate

No. 1; Jalan 3/116D Kuchai Entrepreneurs Park

AKvarnbacksvagen 28

Ford Road, Arundel

Bromma, Sweden 179-68

West Sussex, England, BN11 0BF

Tel: 46 827 1430

Tel: 44 (0)1903 726 999

Email: oskar@wilprod.se

Email: sales@diamondgolf.co.uk

Email: Nathan@jnggolf.com

Web: www.wilprod.se

Web: www.diamondgolf.co.uk

Web: www.jnggolf.com

EUROPE (Benelux Countries) European Golf Components BV

EUROPE (Germany, Austria, Switzerland) TCF Golf GBR

SOUTH AFRICA Golf Science Pty Ltd

Windmolenbosweg 1A

Siebenborn 28

Unit 6, Highway Park

Haelen, Netherlands, 6081-PE

Brey/Rhens, Germany, 56321

Northgate Estate, Brooklyn

Tel: 0475 510 747 or mobile 0653-375740

Tel: 49 (0)674 280 8491

Western Cape, South Africa, 7405

Email: info@egcbv.eu

Email: info@tcfgolf.com

Tel: 27 21 511 9066

Web: www.egcbv.eu

Web: www.tcfgolf.com

Email: warren.lake@golfscience.co.za

Kuala Lumpur, Malaysia, 58200 Tel: 60 37 980 0284

Web: www.golfscience.co.za

THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN

Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.