Putters
THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN
WISHONGOLF.COM
S 2R Precision Heel/Toe Blade Style Putter Designs with CNC Milled Face and Sole in 5 Design Options • Double CNC Milled Face for precision to ensure complete accuracy • Three Level CNC Milled Sole elevates the leading and trailing edges to help reduce “scuffing” the putter and to enhance a slightly upward angle of attack into the putter, which is proven to be the key to consistent roll • Designed in Five Different Heel/Toe Models to offer a wide range in putter fitting to golfers who prefer more conventional putter head styles
Series Putters SPECIFICATIONS – SERIES S2R PUTTERS ITEM #
Head
Loft
Lie
Weight
205
Model 1 RH
3°
71°
345g
Face Height Blade Length Face Prog. 23.5mm
110mm
-5mm
Shaft to Use
RH/LH
Straight
RH
205-L
Model 1 LH
3
71
345
23.5
110
-5
Straight
LH
205
Model 2 RH
3
90
350
24.5
113
7
DB or SB
RH
205
Model 3 RH
3
72
345
25
104
-2
Straight
RH
205
Model 4 RH
4
74
380
23.5
116
-2
Straight or Belly Length Straight
RH
205
Model 5 RH
3.5
90
355
24
110
+7
DB or SB
RH
Left Hand
S 2R - 1 Right Hand
• Dark Platinum Nickel Finish delivers a beautiful, high-quality, non-glare appearance • Model 5 designed with face groove pattern to enhance roll
White Version
• S2R Model 1 also available in matte white finish Head Material: 17-4 Stainless Steel Method of Mfg: Investment Cast + CNC Milling of Face and Sole Ferrule Required: No Bore Diameter: For all S2R Putters - 0.370” parallel Loft/Lie Bending: For Models 1 & 3 - +/-4º in all directions by hosel For Models 2, 4, & 5 – Bending has to be done on the shaft
54
800. 470. 0072 • W I SH O N G O L F. C O M
S 2R - 3
S 2R - 2
S2R–2 shown with TWGT Double Bend Shaft (left above) and Single Bend Shaft (right above)
S 2R - 4
S 2R - 5
S2R model 4 is
New face groove
suitable for belly
design to enhance
putter assembly
roll
with #605-PT-Belly putter shaft
55
SMOOOTH Mallet and Heel Toe High MOI Designs with Tungsten and Steel Weighting in Black and New White Versions • Three Different High MOI Multi-Material Putter Designs including heel/toe weighted Smoooth Series Model 5 • Two Full Mallet Designs with One Heel/Toe Design each with significant weight addition capability to offer a wide range of putter fitting options • Forged From Soft 6061 Aluminum with tungsten and steel weighting added to increase the MOI and pinpoint the CG for better performance • White Versions of the Model 6 and 7 available for wider putter fitting options. White model 6 heel and center bore versions; white model 7 in heel bore only • Model 5 with heavy steel heel/toe sections surrounding a soft 6061 aluminum center to increase MOI
Series Putters
SPECIFICATIONS – SMOOOTH SERIES PUTTERS ITEM #
Head
Loft
Lie
Wgt.
Face Prog. H/T Radius F/B Radius Head Material Shaft to Use RH/LH
202-5
Smoooth 5 - Heel/Toe
4º
90º
335
7.75mm
600mm
500mm
6061 Al + Steel
Dbl/Sgl Bend
RH/LH
202-6
Smoooth 6 - Heel Bore
3
90
335-405
7.75
600
500
6061 Al + Tungsten
Dbl/Sgl Bend
RH/LH
202-6-CB
Smoooth 6 - Center Bore
3
74
335-405
7.75
600
500
6061 Al + Tungsten
Straight
RH
Dbl/Sgl Bend
RH
202WHT- Smoooth 6 White - Heel 6-RH Bore
3
90
335-405
7.75
600
500
6061 Al + Tungsten
202WHTCB-6-RH
Smoooth 6 White Center Bore
3
74
335-405
7.75
600
500
6061 Al + Tungsten
Straight
RH
202-7
Smoooth 7 - Heel Bore
3.5
90
335-405
7.75
600
500
6061 Al + Tungsten
Dbl/Sgl Bend
RH/LH
202-7-CB
Smoooth 7 - Center Bore
Straight
RH
Dbl/Sgl Bend
RH
202WHT- Smoooth 7 White - Heel 7-RH Bore
3.5
74
335-405
7.75
600
500
6061 Al + Tungsten
3.5
90
335-405
7.75
600
500
6061 Al + Tungsten
WEIGHTS FOR SMOOOTH SERIES PUTTERS ITEM #
DESCRIPTION
101-14
14 gram tungsten weights for all Smoooth Series putters (sold separately)
SMOOOTH - 5
Head Material: Models 6 and 7 – 6061 Aluminum + Tungsten
Smoooth Series #6 and #7 accept up to 5 tungsten weight disks to allow head weighting from 355 to 405 grams. Model #5 accepts up to 3 tungsten weights.
Model 5 – 6061 Aluminum + 17-4 Stainless Steel Bore Diameter: For all Smoooth Series Models – 0.370” Notes: 1) Lie Angle on the heel bore models determined by the double bend shaft. Custom lie fitting has to be done by bending the shaft 2) RH Heel Bore models have to use a RH Double Bend shaft; LH Heel Bore models have to use a LH Double Bend shaft
Smoooth 6 Center Bore
3) 14g tungsten weights should be epoxied in place in the weight bore
56
800. 470. 0072 • W I SH O N G O L F. C O M
SMOOOTH - 6
SMOOOTH - 7
Smoooth 6
Smoooth 7
Center Bore
Heel Bore
#6 AND #6CB WHITE VERSIONS AVAILABLE
#7 WHITE VERSION AVAILABLE
Smoooth 6 Showing Weight Cavity on the Sole
Smoooth 7 Center Bore
57
O/S
Series Oversize Putters
A Unique Series of Oversize Putters for a Much Higher MOI and Easier Alignment
SPECIFICATIONS – O/S SERIES PUTTERS ITEM #
Head
Loft
Lie
Body
Face Height
Blade Length
Face Prog.
Shaft to Use
RH/LH
206-OS-1
O/S Model 1
3°
90°
360g
33mm
140mm
+ 9mm
DB or SB
RH/LH
206-OS-2
O/S Model 2
3
90
360
32
126
+9
DB or SB
RH/LH
Note: O/S Model 1 accepts the 2, 4, 6, 9 gram weight plugs; O/S Model 2 accepts the 14 gram tungsten disks (see page 82)
• Two Significantly Oversize TWGT Putter Designs, one mallet style, one heel toe weighting design, for golfers to gain the utmost in off center forgiveness
O/S Series #1
• O/S Series Oversize Design Allows Much Easier Alignment because the much larger face width offers a greater straight edge area to line up to the target • Wide Range of Custom Head Weight for Fitting is more possible through the two different types of weight bores on the two different models • O/S Series Putters are 100% Fully CNC Machined from high strength 6061 soft aluminum alloy for the utmost in accuracy, precision and quality; finished in a brand new durable electrostatic paint • O/S Series Designs are both sold with matching protective headcover included in the price
Head Material: 6061 Aluminum Method of Manufacture:
O/S Series #2
100% CNC machined from 6061 aluminum block Ferrule Required: No Bore Diameter: 0.375” Loft/Lie Adjustment: All loft or lie changes must be done by bending the shaft
58
800. 470. 0072 • W I SH O N G O L F. C O M
O/S Series #1
O/S Series Model 1 allows the addition of up to 36 grams of headweight through the rear of the toe and heel areas of the head.
Each O/S Series putter head sold with matching headcover
O/S Series #2
Model 2 accepts up to 5 of the 14 gram tungsten disks through the sole cavity on the rear of the head.
59
TOM WISHON GOLF TECHNOLOGY DESIGNS ARE AVAILABLE FROM: USA, CANADA, UK & EUROPE Tom Wishon Golf Technology
EUROPE (France) Golf N Swing
EUROPE (Germany) Clubmate Golf
695 County Road 233
10/14 Avenue General LeClerc
Augustinusstrasse 9C
Durango, CO, USA 81301
Le Pecq, France 78230
Frechen, Germany, D-50226
Tel: 800-470-0072 (USA & Canada)
Tel: 33 139 161 860
Tel: 49 (0)6157 80366 40
Tel: 970-375-0411 (all other countries)
Email: golfnswing@gmail.com
Email: info@clubmategolf.com
Mon to Fri, 8AM to 4:30 PM, (MST/MDT)
Web: www.golfnswing.com
Web: www.clubmategolf.com
UNITED KINGDOM Diamond Golf International, Ltd.
ASIA (Malaysia, Singapore) JNG Malaysia SDN BHD
www.wishongolf.com
EUROPE (Sweden, Finland, Denmark, Norway) Wilprod Sportagenturer AB/Bromma Golf
U4/U5 Rudford Estate
No. 1; Jalan 3/116D Kuchai Entrepreneurs Park
AKvarnbacksvagen 28
Ford Road, Arundel
Bromma, Sweden 179-68
West Sussex, England, BN11 0BF
Tel: 46 827 1430
Tel: 44 (0)1903 726 999
Email: oskar@wilprod.se
Email: sales@diamondgolf.co.uk
Email: Nathan@jnggolf.com
Web: www.wilprod.se
Web: www.diamondgolf.co.uk
Web: www.jnggolf.com
EUROPE (Benelux Countries) European Golf Components BV
EUROPE (Germany, Austria, Switzerland) TCF Golf GBR
SOUTH AFRICA Golf Science Pty Ltd
Windmolenbosweg 1A
Siebenborn 28
Unit 6, Highway Park
Haelen, Netherlands, 6081-PE
Brey/Rhens, Germany, 56321
Northgate Estate, Brooklyn
Tel: 0475 510 747 or mobile 0653-375740
Tel: 49 (0)674 280 8491
Western Cape, South Africa, 7405
Email: info@egcbv.eu
Email: info@tcfgolf.com
Tel: 27 21 511 9066
Web: www.egcbv.eu
Web: www.tcfgolf.com
Email: warren.lake@golfscience.co.za
Kuala Lumpur, Malaysia, 58200 Tel: 60 37 980 0284
Web: www.golfscience.co.za
is a registered trademark of Tom Wishon Golf Technology. Š2012 TWGT All rights reserved. All other trademarks belong to their respective owners.
THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN
Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.