TWGT Shafts 2012 by Richard Kempton

Wood, Hybrid and Iron Shafts

THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN

WISHONGOLF.COM

Shaft Fitting System Wishon Golf’s S2S Shaft Fitting System is the first and the only collection of original shaft designs based completely on matching specific golfer swing characteristics to the individual shaft design. S2S stands for Shaft to Swing. Our S2S Shaft Fitting System and S2S shaft designs are created by Wishon Golf based on countless hours of shaft analysis and fitting research to determine the best specific shaft design elements for specific golfer swing characteristics. Wishon Golf has been the leader in shaft analysis and shaft fitting research since 1991 when Tom Wishon’s milestone book, The Modern Guide to Shaft Fitting, was published. At Wishon Golf we pride ourselves on knowing more about how shafts are to be fit and matched to specific golfer swing characteristics than any other company in the golf industry. When you fit your golfers with one of our proprietary shaft designs within our Wishon Golf S2S Shaft Fitting System, you are offering your golfers the very best possible shaft performance.

S2SWHITE GRAPHITE SHAFTS FOR WOODS, IRONS & HYBRIDS

Same Profile in a

NEW Lighter Weight

The new, lighter weight S2S White graphite shafts are designed for golfers with Transition/Tempo/Release swing ratings of 1.5 to 2/1.5 to 2/1.5 to 2 and have proven themselves as a good fitting selection for golfers with average overall swing characteristics. [S2S White Wood & Iron shafts, pages 64/65] [S2S White Hybrid shafts, page 70]

S2SBLACK GRAPHITE SHAFTS FOR WOODS, IRONS & HYBRIDS

NEW

The S2S Black 65 and 85 wood shafts are NEW for 2012. S2S Black wood, iron and hybrid shafts are designed for golfers with Transition/Tempo/ Release swing ratings of 2 to 3/2 to 3/2 to 3 and are a good fitting selection for better than average to skilled golfers with more aggressive overall swing characteristics. [S2S Black Wood & Iron shafts, pages 66/67] [S2S Black Hybrid shafts, page 71]

S2SGOLD PLUS GRAPHITE SHAFTS FOR WOODS & IRONS The S2S Gold Plus wood and iron shafts are designed for golfers with swing characteristics in between those for the S2S White and S2S Black shaft designs. S2S Gold Plus wood and iron shafts are designed for golfers with Transition/Tempo/Release swing ratings of 1.5 to 2.5/1.5 to 2.5/1.5 to 2.5, OR, for golfers with a late release who wish to hit the ball higher. [S2S Gold Plus Wood & Iron shafts, page 68]

800. 470. 0072 • W I SH O N G O L F. C O M

S2SBLUE GRAPHITE SHAFTS FOR WOODS The S2S Blue graphite shafts are our lightest weight shafts for woods. S2S Blue 45 is designed in an AA (L) and A flex for golfers with Transition/Tempo/Release swing ratings of 1 to 2/1 to 2/1 to 2. The S2S Blue 55 R and S flex shafts are for a little bit better swinging golfer with Transition/Tempo/Release swing ratings of 1.5 to 2.5/1.5 to 2.5/1.5 to 2.5. S2S Blue enables clubmakers to build drivers and fairway woods with the lightest total weight. [S2S Blue Wood shafts, page 69]

S2SGREEN GRAPHITEFORSHAFTS WOODS & IRONS

NEW

The newest addition to the S2S Shaft Fitting System, the NEW S2S Green wood and iron shafts are designed in an A/L combination flex to enable clubmakers to customize the shaft fit for slower swinging golfers with Transition/ Tempo/Release swing ratings of 1 to 2/1 to 2/1 to 2. S2S Green iron shafts (0.370” tip) allow clubmakers to fit any of our TWGT iron models (0.370” bore) to an average woman golfer or slower swinging male golfer. [S2S Green Wood & Iron shafts, page 75]

S2SRUBY LITE GRAPHITE SHAFTS FOR WOODS, IRONS & WEDGES The S2S Ruby Lite shafts are chiefly designed for golfers being fit with TWGT’s model 730CL clubheads as well as for any slow swinging golfer with any TWGT club head design. S2S Ruby Lite shafts are designed for Transition/Tempo/ Release swing ratings of 1 to 1.5/1 to 1.5/1 to 1.5. [S2S Ruby Lite Wood, 0.335” Hybrid, 0.335” Iron and Wedge shafts, page 74]

S2SSTEPLESS & SUPERLITE STEEL SHAFTS FOR IRONS

NEW

Wishon Golf’s brand NEW S2S Stepless steel iron shafts are for golfers with Transition/Tempo/Release swing ratings of 2 to 3/2 to 3/2.5 to 3 and are a good fitting selection for better than average to skilled golfers with more aggressive overall swing characteristics. The S2S Superlight steel iron shafts are a good match for golfers with Transition/ Tempo/Release swing ratings of 1.5 to 2/1.5 to 2/1.5 to 2 who desire the feel of a steel shaft but who are average to slightly less skilled in their swing characteristics. [S2S Superlight and S2S Stepless steel shafts, page 72/73]

S2S WHITE

SAME BEND PROFILE IN A

Graphite Wood & Iron Shafts

S2S White Graphite Shafts are Designed for the Widest Range of Golfers with Average Swing Characteristics

NEW LIGHTER WEIGHT

S2S WHITE GRAPHITE SHAFTS Transition

Tempo

Release

Strength

1.5 to 2

1 to 2

• S2S White Graphite Shafts are designed for golfers with an average to slightly below average Transition force and downswing Tempo acceleration (1.5 to 2), and with a midway to slightly before midway Release (1.5 to 2) of the wrist-cock angle on the downswing. • NEW Lighter Weight Design for 2012 but with the same bend profile – 63g A Flex, 65g R-Flex and 67g S-Flex offer a lighter total weight for the woods. • S2S White Bend Profile Design is created to be Butt Medium, Center Section Medium and Tip Section Medium to better match to the golfers with average to slightly below average Transition and Tempo, with a midway to slightly before midway Release.

USE THE

FREE

S2S SHAFT FITTING PROGRAM ON WISHONGOLF.COM

• S2S White Graphite Shafts are available in the woods and irons in A, R and S flexes to fit driver swing speeds from 60 to 100 mph and mid iron swing speeds from 55 to 85mph. • S2S White Graphite Shaft Weights allow the cut shaft weight of the wood shafts to range from 59g to 63g, and the iron shafts from 71g to 76g to result in an ideal golf club total weight for average ability golfers. • S2S White Graphite Shafts are TWGT’s Most Popular Shaft for golfers with average swing characteristics.

800. 470. 0072 • W I SH O N G O L F. C O M

SPECIFICATIONS – S2S WHITE GRAPHITE WOOD SHAFTS Bend Profile Design (cpm/454g tip weight)

ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

Dr Swing Speed

41” +/-2

36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-8

610-WD-A

63g/59g

0.594"/0.335"

4.0º

45"

21.25"

60-75mph

155

180

210

250

320

435

720

610-WD-R

65/61

0.594/0.335

3.9

21.25"

75-90mph

165

190

220

265

330

450

745

610-WD-S

67/63

0.602/0.335

3.8

21.25"

90-105mph

175

200

230

280

350

470

770

11” +/-20

SPECIFICATIONS – S2S WHITE GRAPHITE IRON SHAFTS Bend Profile Design (cpm/454g tip weight)

ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-10

11” +/-25

610-IR-A

74g/71g

0.594”/0.370”

3.7°

41”

20.5”

55–65mph

193

221

262

332

450

745

610-IR-R

77/74

0.598/0.370

3.5

20.4

65–75

205

233

273

343

465

760

610-IR-S

79/76

0.598/0.370

3.3

20.15

75–85

216

247

285

355

480

780

See Page 76-77 for Shaft Trim Charts. S2S White R, S flex woods – Chart A; S2S White A flex woods – Chart B; S2S white R, S flex irons – Chart C; S2S White A flex irons – Chart D; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

SAME BEND PROFILE IN A

NEW LIGHTER WEIGHT

S2S BLACK

NEW

Graphite Wood & Iron Shafts

TWGT’s Graphite Design for Better Golfers has been Re-Designed for 2012 with a Firmer Tip Section Design • S2S Black Graphite Shafts are NEW for 2012, created with an improved, slightly stiffer tip bend profile design for golfers with Transition/Tempo/Release ratings from 2 to 3.

WOOD SHAFT DESIGN FOR 2012

S2S BLACK 65 GRAPHITE WOOD SHAFTS Transition

Tempo

Release

Strength

2 to 3

1.5 to 2

Transition

Tempo

Release

Strength

85g Wood

2 to 3

2 to 2.5

85g Iron

2 to 3

2 to 2.5

65g Wood

S2S BLACK 85 GRAPHITE WOOD & IRON SHAFTS

• S2S Black 65 gram Wood Shafts are for golfers with more aggressive swing characteristics who have a Strength rating of 1.5 to 2, OR who may be stronger but simply prefer the lighter total weight feel from a 65g shaft weight. • S2S Black 85 gram Wood Shafts are for golfers with more aggressive swing characteristics who have a Strength rating of 2 to 2.5, OR who may be weaker but simply prefer the heavier total weight feel from an 85g shaft weight. • S2S Black 85 Iron Shafts are designed for golfers with more aggressive swing characteristics who have a Strength rating of 1.5 to 2, OR who may be stronger but simply prefer the lighter total weight feel from an 85g shaft versus a conventional steel iron shaft.

USE THE

FREE

S2S SHAFT FITTING PROGRAM ON WISHONGOLF.COM

800. 470. 0072 • W I SH O N G O L F. C O M

SAME BUTT & CENTER PROFILE BUT STIFFER TIP DESIGN SPECIFICATIONS – S2S BLACK 65 & 85 GRAPHITE WOOD SHAFTS ITEM #

Flex

660-PRO-65-R

Raw/Cut Weight

Butt/Tip Diameter

Torque

65g/61g

0.602/0.335

3.6º

Raw Length

Balance Point

Dr Swing Speed

46"

22"

85-100mph

Bend Profile Design (cpm/454g tip weight) 41” +/-2

36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-8

11” +/-20

168

188

224

275

350

500

825

660-PRO-65-S

65/61

0.605/0.335

3.4

22"

95-110mph

176

200

236

284

365

515

850

660-PRO-85-R

85/81

0.602/0.335

3.4

21.25

85-100mph

168

188

224

275

350

500

825

660-PRO-85-S

85/81

0.605/0.335

3.2

21.25

95-110mph

176

200

236

284

365

515

850

660-PRO-85-X

85/81

0.605/0.335

3.0

21.75

105-120mph

184

212

248

295

380

540

875

SPECIFICATIONS – S2S BLACK 85 GRAPHITE IRON SHAFTS Bend Profile Design (cpm/454g tip weight)

ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-10

11” +/-25

660-IR-R

85g/82g

0.602"/0.370"

3.2º

41"

20.75"

65-75

201

234

280

367

520

835

660-IR-S

85/82

0.602/0.370

3.0

20.75

75-85

212

248

295

382

535

870

See Page 76-77 for Shaft Trim Charts. S2S BLack 65/85 woods – Chart A; S2S Black 85 R, S flex irons – Chart C; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

S2S GOLD

PLUS Graphite Wood & Iron Shafts

S2S Gold Plus Shafts Offer Clubmakers a Design for Swing Characteristics in Between the S2S White and S2S Black

S2S GOLD PLUS GRAPHITE WOOD SHAFTS

S2S GOLD PLUS GRAPHITE IRON SHAFTS

Transition

Tempo

Release

Strength

Transition

Tempo

Release

Strength

1.5 to 2.5

2 to 2.5

1.5 to 2.5

2 to 2.5

• S2S Gold Plus Shafts are designed for golfers with Transition/Tempo/Release swing ratings of 1.5 to 2.5/1.5 to 2.5/1.5 to 2.5. • S2S Gold Plus Shafts are also designed for golfers with a later release who wish to hit the ball with a higher launch angle and higher shot trajectory.

SPECIFICATIONS – S2S GOLD PLUS GRAPHITE WOOD SHAFTS Bend Profile Design (cpm/454g tip weight)

ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

Dr Swing Speed

41” +/-2

36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-8

11” +/-20

600-WD-A

72g/68g

0.594"/0.335"

4.0º

45"

22.15"

60-75mph

160

185

220

270

340

435

720

600-WD-R

74/70

0.594/0.335

3.9

22.15

75-90mph

170

200

235

290

360

450

740

600-WD-S

77/73

0.602/0.335

3.8

21.9

90-105mph

180

210

245

300

370

465

760

SPECIFICATIONS – S2S GOLD PLUS GRAPHITE IRON SHAFTS Bend Profile Design (cpm/454g tip weight)

ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-10

11” +/-25

600-IR-R

77g/74g

0.602”/0.370”

3.5°

41”

20.4”

60–70mph

212

245

295

370

505

825

600-IR-S

79/76

0.602/0.370

3.3

20.3

70–80

222

256

310

385

525

870

See page 76-77 for Shaft Trim Charts. S2S Gold Plus R, S flexes for woods – Chart A; S2S Gold Plus A flex for woods – Chart B; S2S Gold Plus S flex irons – Chart C; S2S Gold Plus R flex irons – Chart D; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

USE THE

FREE

S2S SHAFT FITTING PROGRAM ON WISHONGOLF.COM

800. 470. 0072 • W I SH O N G O L F. C O M

S2S BLUE

Graphite Wood Shafts

S2S Blue 45/55 Offers Clubmakers the Lightest Shaft Fitting Options for Drivers and Fairway Woods

S2S BLUE 45 GRAPHITE WOOD SHAFTS

S2S BLUE 55 GRAPHITE WOOD SHAFTS

Transition

Tempo

Release

Strength

Transition

Tempo

Release

Strength

1 to 2

1 to 1.5

1.5 to 2

1.5 to 2.5

1 to 2

• S2S Blue 45 in AA (L) and A Flexes for Golfers Between 45-75 mph Clubhead Speed who need the lightest possible total weight in their driver and woods. Cut shaft weight of the S2S Blue 45 is only 43g (AA) and 44g (A). • S2S Blue 45 is for Golfers with a Smooth Transition/ Tempo and Early to Midway Release • S2S Blue 55 in R and S Flexes for Golfers Between 80-100mph Clubhead Speed who also need a very light total weight to increase clubhead speed. • S2S Blue 55 is for Golfers with an Average Transition/ Tempo and Midway to Slightly Later Release SPECIFICATIONS – S2S BLUE 45 & 55 GRAPHITE WOOD SHAFTS ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

Bend Profile Design (cpm/454g tip weight) 41" '+/-2

36" '+/-2

31" '+/-3

26" '+/-4

21" '+/-5

16" '+/-8

617-WD-AA

47g/43g

0.590"/0.335"

5.5º

45"

22.3"

45-60mph

145

163

190

230

292

410

695

617-WD-A

48/44

0.590/0.335

5.0

22.0

60-75mph

155

175

196

236

300

418

717

607-WD-R

55/51

0.600/0.335

4.2

23.75

80-95mph

165

185

216

263

331

445

750

607-WD-S

55/52

0.600/0.335

3.8

23.75

90-105mph

175

195

226

273

343

460

775

11" '+/-20

See page 76-77 for Shaft Trim Charts. S2S Blue 45 AA Flex – Chart B; S2S Blue 45 A Flex – Chart A; S2S Blue 55 R, S Flexes – Chart A; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

S2S WHITE TWGT’s High Flight 0.335” Tip S2S White Hybrid Design for Average to Slightly Above Average Golfers who Need a Lighter Hybrid Shaft Weight • The Performance Secret to Higher Flight and More Distance with all TWGT hybrid clubhead designs

Graphite Hybrid Shafts • 0.335” Tip Design is Proven to Deliver Higher Trajectory and a very solid feel to offer a high, soft landing flight for all TWGT hybrid clubhead models – as much as a 4º increase in launch angle over a 0.370” iron shaft for the same loft • S2S White Hybrid Shafts are Available in AA (L), A, R and S Flexes

S2S WHITE HYBRID GRAPHITE SHAFTS

• S2S White Hybrid Designed from 70g (AA) to 78g (S) for golfers with average strength and with an average to below average Transition force to start the downswing

Transition

Tempo

Release

Strength

1.5 to 2

• S2S White Hybrid Bend Profile is ideal for golfers with an early to midway to even slightly late release who also are average in their Transition and Tempo

SPECIFICATIONS - S2S WHITE HYBRID GRAPHITE SHAFTS ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

Bend Profile Design (cpm/454g tip weight) 36” +/-2

31” +/-3

26” +/-3

21” +/-5

16” +/-10

11” +/-25

635-AA

AA (L)

70g/67g

0.590"/0.335"

4.0º

41"

19.7"

45-55mph

190

220

255

325

465

780

635-A

73/70

0.594/0.335

3.8

19.6

55-65

200

230

265

340

480

800

635-R

75/72

0.598/0.335

3.7

19.4

65-75

210

240

275

355

495

820

635-S

78/75

0.602/0.335

3.5

19.2

75-85

220

250

285

370

510

840

See page 76-77 for Shaft Trim Charts. S2S White Hybrid (all flexes) – Chart E; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

USE THE

FREE

S2S SHAFT FITTING PROGRAM ON WISHONGOLF.COM

800. 470. 0072 • W I SH O N G O L F. C O M

S2S BLACK TWGT’s High Flight 0.335” Tip S2S Black Hybrid Design for Slightly Above Average to Skilled Golfers who Need a Heavier Hybrid Shaft Weight • S2S Black Hybrid are the former S2S Gold Tour Hybrid graphite shafts. Because they are a design for later release players, TWGT decided to bring these shafts into our S2S Black line of shafts

Graphite Hybrid Shafts with a midway to very late release who also are above average in their Transition force and Tempo • 0.335” Tip Design is Proven to Deliver Higher Trajectory and a very solid feel to offer a high, soft landing flight for all TWGT hybrid clubhead models – as much as a 4º increase in launch angle over a 0.370” iron shaft for the same loft • S2S Black Hybrid Shafts are Available in R and S Flexes

S2S BLACK HYBRID GRAPHITE SHAFTS

• S2S Black Hybrid Designed from 95g (R) to 100g (S) for golfers with above average strength and with stronger than average Transition force to start the downswing

Transition

Tempo

Release

Strength

2 to 3

1.5 to 2.5

• S2S Black Hybrid Bend Profile is ideal for golfers

SPECIFICATIONS – S2S BLUE 45 & 55 GRAPHITE WOOD SHAFTS ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

Bend Profile Design (cpm/454g tip weight) 36" '+/-2

31" '+/-3

26" '+/-3

21" '+/-5

16" '+/-10

11" '+/-25

645-R

95g/92g

0.602"/0.335"

3.2

18.6

65-80

215

245

280

360

500

830

645-S

100/97

0.602/0.335

3.0

18.5

75-90

225

255

290

375

525

855

See page 76-77 for Shaft Trim Charts. S2S Black Hybrid (both flexes) – Chart E; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80. Tech Note: TWGT offers a specially designed coiled shim for installing the S2S White or Black Hybrid into any conventional ironhead with a 0.370” bore.

S2S STEPLESS TWGT’s All New Medium Weight Stepless Steel Iron Design for Better Than Average Players

Steel Iron Shafts

NEW

• S2S Stepless is More Butt Flexible But More Tip Stiff than the former Series 5 Lightweight Steel shafts from TWGT – an improved bend profile for golfers with better swing characteristics.

• S2S Stepless Steel Designed for Better Players with above average strength and with stronger than average Transition force. • S2S Stepless Steel Bend Profile is ideal for golfers with a midway to very late release who also are average to above average in their Transition force and Tempo. For golfers with an early to midway release and smooth to average Transition/Tempo who wish to play steel, use the S2S Superlite Steel iron shafts.

• S2S Stepless Steel Iron Shafts are Available in R and S Flexes – 42” raw length for the R flex and 40” for the S Flex to make it easier to keep the two flex versions from being mixed up due to the stepless design.

S2S STEPLESS STEEL IRON SHAFTS Transition

Tempo

Release

Strength

2 to 3

SPECIFICATIONS - S2S STEPLESS STEEL IRON SHAFTS Bend Profile Design (cpm/454g t3

ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

36” +/-3

31” +/-3

26” +/-5

21” +/-5

16” +/-10

11” +/-25

605-Stepless-R

120g/117g

0.602"/0.335"

3.0º

42"

20.5"

65-80

209

244

300

381

530

860

605-Stepless-S

115/112

0.602/0.335

2.9

19.5

75-90

216

257

314

398

550

890

See page 76-77 for Shaft Trim Charts. S2S Stepless R Flex – Chart D; S2S Stepless S Flex – Chart C; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

USE THE

FREE

S2S SHAFT FITTING PROGRAM ON WISHONGOLF.COM

800. 470. 0072 • W I SH O N G O L F. C O M

S2S SUPERLITE

Steel Iron Shafts

NEW

S2S SuperLite Steel Shafts Designed for Golfers who Prefer the Feel of Steel but at a Lighter Weight • S2S SuperLite Steel Designed to be More Tip Flexible than the S2S Stepless Steel Iron Shafts for golfers with an earlier to midway release. • Sub-100 gram Weight of the S2S SuperLite Steel Iron Shafts offers a lighter total weight but at a more economical price than other sub-100 gram steel shafts. • S2S SuperLite Steel Designed for Golfers with an slightly less forceful to average Transition and Tempo who prefer the impact feel of a steel iron shaft over graphite.

S2S SUPERLITE STEEL IRON SHAFTS

• S2S SuperLite Steel Available in R and S flexes

Transition

Tempo

Release

Strength

1.5 to 2

1.5 to 2.5

SPECIFICATIONS – S2S SUPERLITE STEEL IRON SHAFTS ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

Bend Profile Design (cpm/454g tip weight) 36" '+/-3

31" '+/-3

26" '+/-5

21" '+/-5

16" '+/-10

11" '+/-25

605-Superlite-R

106g/103g

0.602"/0.335"

3.2º

42"

20"

60-70mph

216

262

320

390

500

740

605-Superlite-S

102/99

0.602/0.335

3.1

70-80

222

274

333

410

520

780

S2SRUBY LITE Graphite Wood, Hybrid, Iron and Wedge Shafts TWGT’s S2S Ruby Lite Perfectly Matches the 730CL Set for Golfers with Swing Speeds Between 45mph and 75mph

• S2S Ruby Lite is More Butt Flexible and Significantly More Tip Flexible than the Former

730CL graphite shafts – a perfect re-design for the sub-80mph golfer with smooth and passive downswing force in their swing

S2S RUBY LITE GRAPHITE SHAFTS

• Very Butt Soft and Very Tip Soft Bend Profile

Designed in Discrete AA (L) and A flexes for golfers of less than 80mph swing speed with a smooth, passive transition/tempo and early to midway release. S2S Ruby Lite wedge shaft remains as a combination A/AA flex design

Transition

Tempo

Release

Strength

1 to 1.5

1 to 2

• S2S Ruby Lite Hybrid Iron Shafts Designed with a

0.335” Tip Diameter to ensure a high launch and superb performance for the 730CL hybrid iron clubs

SPECIFICATIONS – S2S RUBY LITE GRAPHITE SHAFTS ITEM #

Flex

Shaft Type

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Balance Swing Speed Length Point 41” +/-2

Bend Profile Design (cpm/454g tip weight) 36” +/-2

31” +/-3

26” +/-3

630-WD-AA

Wood

65g/61g

0.590”/0.335”

5.5°

44”

21.55”

45–60mph

140

160

185

225

21” +/-5 16” +/-10 11” +/-25 280

395

675

630-WD-A

Wood

67/63

0.590/0.335

5.0

21.65

60–75

150

170

200

240

300

420

700

630-IR-AA

Hybrid Iron

68/65

0.590/0.335

4.5

19.2

40–50

185

215

255

315

450

760

630-IR-A

Hybrid Iron

70/67

0.590/0.335

4.2

19.0

50–60

195

225

265

330

475

785

630-WG-A/L

A/AA

Wedge

75/72

0.590/0.370

4.5

18.0

40–60

220

260

330

455

780

See Page 76-77 for Shaft Trim Charts. S2S Ruby Lite woods (all flexes) – Chart B; S2S Ruby Lite irons – Chart E; S2S Ruby Lite wedges – Chart E Balance Point measured down from the Butt. Clubmakers can purchase TWGT’s Shaft Bend Profile Software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

USE THE

FREE

S2S SHAFT FITTING PROGRAM ON WISHONGOLF.COM

800. 470. 0072 • W I SH O N G O L F. C O M

S2S GREEN

Graphite Wood and Iron Shafts NEW

A New Addition to the S2S Line of Original Shaft Designs to Offer Clubmakers an Economical Combination Flex 0.335”/0.370” Shaft for Slow Swing Speed Golfers • S2S Green is a Combination A/L Flex Design for men or women with 50-75mph wood swing speeds and 40 to 60 mph iron swing speeds. No Flex Letters are on the S2S Green for golfer who don’t want a soft flex designation on the shaft.

• Combination Flex Wood and Iron Shaft Design offers clubmakers the chance to custom tip trim to achieve a very wide range of softer flex options for slower swinging golfers. • S2S Green Wood Shafts are the Former Series 5 Flexible Wood Shafts. S2S Green Iron Shafts are a Completely New Combination A/L Flex Design with 0.370” parallel tip.

S2S GREEN GRAPHITE SHAFTS Transition

Tempo

Release

Strength

1 to 2

• S2S Green Iron Shaft has a 0.370” Tip to Allow Clubmakers to Fit Slow Swing Speed Golfers into any TWGT Iron Design with a 0.370” Bore. S2S Ruby Lite Hybrid Iron shafts are designed with a 0.335 tip so they cannot easily be used in any conventional TWGT Iron model.

SPECIFICATIONS – S2S GREEN GRAPHITE WOOD & IRON SHAFTS ITEM #

Flex

Raw/Cut Weight

Butt/Tip Diameter

Torque

Raw Length

Balance Point

5i Swing Speed

650-WD-A/L

A/L combo

66g/62g

0.590"/0.335"

650-IR-A/L

A/L combo

4.5º

46"

22"

65/62

0.590/0.335

4.0

20.0

Bend Profile Design (cpm/454g tip weight) 41" '+/-2

36" '+/-2

31" '+/-3

26" '+/-4

21" '+/-5

16" '+/-10

11" '+/-25

50-70mph

148

166

190

230

290

410

710

40-60mph

182

215

255

320

450

730

See page 76-77 for Shaft Trim Charts. S2S Green AA(L) & A Flex Woods – Chart B; S2S Green AA(L) & A Flex Irons – Chart D; Balance Point measured down from the butt end. Clubmakers can purchase TWGT’s Shaft Bend Profile software to perform thousands of shaft to shaft relative stiffness comparisons. See page 80.

TOM WISHON GOLF TECHNOLOGY DESIGNS ARE AVAILABLE FROM: USA, CANADA, UK & EUROPE Tom Wishon Golf Technology

EUROPE (France) Golf N Swing

EUROPE (Germany) Clubmate Golf

695 County Road 233

10/14 Avenue General LeClerc

Augustinusstrasse 9C

Durango, CO, USA 81301

Le Pecq, France 78230

Frechen, Germany, D-50226

Tel: 800-470-0072 (USA & Canada)

Tel: 33 139 161 860

Tel: 49 (0)6157 80366 40

Tel: 970-375-0411 (all other countries)

Email: golfnswing@gmail.com

Email: info@clubmategolf.com

Mon to Fri, 8AM to 4:30 PM, (MST/MDT)

Web: www.golfnswing.com

Web: www.clubmategolf.com

UNITED KINGDOM Diamond Golf International, Ltd.

ASIA (Malaysia, Singapore) JNG Malaysia SDN BHD

www.wishongolf.com

EUROPE (Sweden, Finland, Denmark, Norway) Wilprod Sportagenturer AB/Bromma Golf

U4/U5 Rudford Estate

No. 1; Jalan 3/116D Kuchai Entrepreneurs Park

AKvarnbacksvagen 28

Ford Road, Arundel

Bromma, Sweden 179-68

West Sussex, England, BN11 0BF

Tel: 46 827 1430

Tel: 44 (0)1903 726 999

Email: oskar@wilprod.se

Email: sales@diamondgolf.co.uk

Email: Nathan@jnggolf.com

Web: www.wilprod.se

Web: www.diamondgolf.co.uk

Web: www.jnggolf.com

EUROPE (Benelux Countries) European Golf Components BV

EUROPE (Germany, Austria, Switzerland) TCF Golf GBR

SOUTH AFRICA Golf Science Pty Ltd

Windmolenbosweg 1A

Siebenborn 28

Unit 6, Highway Park

Haelen, Netherlands, 6081-PE

Brey/Rhens, Germany, 56321

Northgate Estate, Brooklyn

Tel: 0475 510 747 or mobile 0653-375740

Tel: 49 (0)674 280 8491

Western Cape, South Africa, 7405

Email: info@egcbv.eu

Email: info@tcfgolf.com

Tel: 27 21 511 9066

Web: www.egcbv.eu

Web: www.tcfgolf.com

Email: warren.lake@golfscience.co.za

Kuala Lumpur, Malaysia, 58200 Tel: 60 37 980 0284

Web: www.golfscience.co.za

THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN

Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.