Promotion Catalog Q3-2020, UK/I

Promotion

July - September 2020

SciCan OPTIM 1 p. 2-3

CanalPro Jeni p. 8

MicroMega REMOVER p.13

Sign up to the COLTENE newsletter and keep up to date.

INFECTION CONTROL

Infection Control for every practice

1

MINUTE

CONTACT TIME**

OPTIM® 1 ONE-STEP CLEANER & DISINFECTANT Active Ingredient: 0.5% Hydrogen Peroxide

With OPTIM 1 there is no need to compromise between efficacy and being protected. With a fast broad-spectrum contact time it is one of the fastest and most effective cleaner & disinfectants. It is also safe and gentle for you and surfaces. OPTIM 1 gives you confidence that you are compliant and protecting your patients, staff and the environment; the perfect balance.

Demonstrated virucidal efficacy also extends to new and emerging pathogens, with a 30 second contact time applying to Novel Coronavirus (COVID-19), Severe Acute Respiratory Syndrome (SARS CoV) and Middle East Respiratory Syndrome (MERS CoV).

FAST AND GENTLE Effective against COVID-19 2

** Effective within 1 minute according to European Standards; EN 14476, EN 14348, EN 13727, EN 13624, EN 16615.

According to the required RKI/DVV standard in Germany SciCan OPTIM 1 is FULL VIRUCIDAL within 2 minutes

Fast Broad-Spectrum Disinfectant

Compatible

Surfaces must remain wet for the entire contact time to achieve disinfection.  Adeno, Polio, Murino Noro in only 30 seconds according to EN 14476

Compatible with a wide range of hard, non-porous materials and surfaces.

 Tuberculocidal & Fungicidal in 1 minute

    

 Bactericidal & Virucidal in 30 seconds according to EN 14476  Full virucide in 2 minutes according to RKI/DVV standard (Polio, Adeno, Murino Noro, SV40)  Effective in 1 minute according to EN 16615  Excellent wettability – stays wet long enough for contact times to elapse

Effective One-Step Cleaner

INFECTION CONTROL

ACTIVE AGAINST COVID-19

Safe and Gentle Free of artificial scents Non-Toxic Non-irritating to skin, eyes and respiratory system No GHS hazard pictograms, signal words or statements Leaves no active residue; doesn’t contribute to antimicrobial resistance

Environmentally Friendly The active ingredient Hydrogen Peroxide breaks down into water and oxygen leaving no active residues which reduces the environmental impact.

An effective 1 step cleaner disinfectant removes the organic debris while it disinfects.

BOOK A DEMONSTRATION WITH YOUR TERRITORY MANAGER TO SEE HOW EFFECTIVE THE SWITCH TO OPTIM 1 CAN BE. SciCan OPTIM 1 Ready-to-use Pre-saturated Wipes RTU Wipes 15 x 18 cm (12 tubs x 160 sheets per tub) REF: OPTEU1-12W RTU Wipes 25 x 25 cm (12 tubs x 60 sheetsper tub) REF: OPTEU1-W10x10

For more information 3

INFECTION CONTROL

STATMATIC ™ smart

NEW

´ T horough internal cleaning and maintenance of dental instruments like contra angles and turbines. ´ C ompact design – saves valuable space in the hygiene room. For convenience, the USB-Stick and test adapter can also be stored space-saving within the unit, under its cover. ´ F or safety and traceability purposes all cycles are documented automatically and can easily be transferred to a computer by using the USB key provided. ´ T he automated cleaning and maintenance process takes only about 3 minutes per instrument. ´ Easy installation – only electricity and a compressed air connection is required ´ The unit is equipped with a separate tip for the specific maintenance of the chuck.

Specifications

Inside cleaning and maintenance

1

Cleaning of spray water and spray air channel with SciCan cleaner

Cleaning of drive air channel and 2 hollow parts with SciCan cleaner

3

4

Maintenance of the gear with SciCan oil

Dimensions (W × H × D)

300 × 280 × 345 mm

Weight

7.3 kg

Rated Voltage

100-230 V

Rated Frequency

50/60 Hz

Rated Power

max. 45 VA

Protection Class

1

Ambient Temperature

5-35 ˚C

Noise

60 (65) dB

Relative Humidity

max. 85 %

Air Pressure

4,5-6 bar

Air Consumption

40 Nl/min

Residual Oil Content

max. 0,1 mg/m3

Residual Dust

max 1µ; max. 1 mg/m3

Residual Water

max. 0,1 g/m3 at -40 °C

Simple Dam Kit with Elasti-Dam REF H02900

Dental Dam Kits Hygenic all in one dental dam kits including dental dam sheets (latex or non-latex), clamps, and accessories.

15%

6“ x 6“ (152 x 152 mm) Elasti-Dam – green medium; 36 sheets (H11625); 6“ (152 mm) Plastic frame (H01414); Fiesta 9W wingless color-coded clamp pack; 6“ Template; Latex Wedjets Cord (small); Dental dam punch; Dental dam forceps

TREATMENT AUXILIARIES

HYGENIC®

DISCOUNT ON ALL DENTAL DAM KITS

Dental Dam Frame U-shaped metal frame, 6“ (152 mm) REF H07083

Brinker Clamps (Tissue Retractors) ´ Provide maximal retraction

without laceration of

gingival tissues Complete Kit with Winged Clamps - REF H02778 6“ x 6“ (152 x 152 mm) Dam – green medium; 36 sheets; 6“ (152 mm) Plastic frame (H01414); Fiesta 9 winged color-coded clamp pack; 6“ Template; Wedjets Cord (small); Dental dam punch; Dental dam forceps

´ Available as a set

or sold individually REF H01054

Complete Kit with Wingless Clamps - REF H02790

5

TREATMENT ENDODONTICS AUXILIARIES

HYGENIC® Gloss Winged & Wingless Clamps

Framed Non- Latex Flexi Dam The HYGENIC Non-Latex Flexi Dam is available with an ultra-convenient, built-in-frame. The flexible frame is designed with a convenient working size of 100 mm × 105 mm to ensure for easy placement without getting in the way. The smooth surface of the plastic frame helps to maximise patient comfort when positioned on their skin

´ Convenient built-in-frame - saves time Stainless steel clamps most needed for dam applications.

Available in winged and wingless.

3+1

BUY 3 - GET 1 FREE*

Standard Latex Dental Dam HYGENIC Dental Dam is made of pure, natural rubber latex. Tough and hard to tear it provides best possible retraction.

The pre cut latex dam is available in different thicknesses and colours.

152mm x 152mm Green: Thin H02146 Medium H02147 Heavy H02148 Extra Heavy H02149 Blue: Medium H03530 BUY 3 - GET 1 FREE* Heavy H07315

3+1

66

´ Highly elastic Flexi Dam material tear resistant and easy placement ´ Latex free - allergy free ´ Can be folded for taking x-rays Size 100 x 105 mm, medium, 20 pcs REF H00750

Standard Non-Latex Dental Dam Latex free Dental Dam, tear resistant with excellent recovery properties Non-Latex, Standard, 15 pcs 152mm x 152mm

REF H09105 Children's size 127mm x 127mm REF H09928

3+1

BUY 3 - GET 1 FREE*

4+1

BUY 4 - GET 1 FREE*

ENDODONTICS

CanalPro™ Irrigation Solutions Irrigation solutions are used to help dissolve vital and necrotic tissue, eradicate bacteria and other microorganisms, remove the smear layer, and lubricate the canal system.

As no single irrigation solutions exists that can accomplish all of the above goals, multiple solutions should be used during clinical treatment. Sodium hypochlorite (NaOCl), ethylenediamenetetraacetic acid (EDTA), and 2% Chlorhexidine (CHX) are commonly used for chemical debridement during the process of canal preparation.

3+1

BUY 3 SOLUTIONS - GET 1 FREE*

CanalPro EDTA 17% 17% EDTA solution (pH 8.5) Removes smear layer and dentin mud Opens dentin tubules for: - Disinfection solutions to work better - Better adhesion of sealers and obturation materials 500ml - REF 60019651

CanalPro NaOCI 3% or 6% For irrigation/debridement of root canals during and after treatment

CanalPro CHX 2% 2% chlorhexidine digluconate solution Substantive

Available in 3% and 6% formula

Very effective against E. faecalis and fungal

500ml - 3% - REF 60019655 500ml - 6% - REF 60019656

500ml - REF 60019658

7

ENDODONTICS

CanalPro Jeni TM

Digital assistance system for canal preparation Autonomous "navigation" in the endo canal owing to revolutionary software

The new CanalPro Jeni endomotor has a patent-pending digital assistance system for canal preparation, which uses complex algorithms to control the file movement at millisecond intervals. The rotary motion and speed are continuously controlled based on current intensity and torque.

Different routes, obstacles and situations CanalPro Jeni is named after its developer Prof. Dr. Eugenio Pedullà and guides you safely through the traffic like a navigation system.

As such, the Jeni system automatically adapts to the individual root canal anatomy, working in unison with the mechanical and chemical preparation every step of the way.

Jeni - ready - go!

CanalPro Jeni, complete set REF 60023659 includes: 1 × Control unit 1 × Motor with apex measuring contact 1 × Fully insulated angled handpiece 1:1 1 × Bluetooth foot switch 1 × Power supply 1 × Apex cable set 1 × Holding bracket for apex cable

8

ASK YOUR TERRITORY MANAGER FOR A DEMONSTRATION See the brochure

ENDODONTICS

HyFlex™ Remover The essential piece for your retreatment

One file to remove the canal obturation Remover is a new addition to the Hyflex range for the removal of old obturation material, integrating the latest generation of cross-sectioning with 3 cutting edges and heat treatment.

NEW

Just one file for the removal of old material You only need one instrument to remove the Gutta-Percha in the canal.

Efficient without solvent use The only file on the market clinically qualified to be used without solvent.

Safe instrument Due to its design, its non-cutting tip and its protocol, REMOVER avoids ledges and respects the root canal anatomy and while being effective.

Reduce the learning time Remover fits perfectly into an existing retreatment procedure without requiring a change in approach.

It’s an essential tool for retreatment and can be used with conventional shaping files.

HyFlex™ REMOVER Blister pack of 5 instruments - Sterile

B5 HyFlex Remover L19 n30 7%

REF 60023649

B5 HyFlex Remover L23 n30 7%

REF 60023658

9

ENDODONTICS

HyFlex™ EDM STAYS ON TRACK TREATS 80% OF ALL CASES WITH THE ONE FILE NE W FILE FOR COMPLEX C ANALS

Orifice Opener 25/.12

HyFlex™ EDM Files

Glide Path File 10/.05

Preparation file 20 /.05

OneFile 25 / ~

Glide Path File 15/.03

20 +10 BUY 20 - GET 10 FREE* ON HYFLEX EDM REFILLS

EXCLUSIVE OFFER ONLY AVAILABLE FROM YOUR TERRITORY MANAGER Refill × 3

Refill × 3

Refill × 3

Refill × 3

Rotation speed 400 rpm and 2.5 Ncm

Rotation speed 300 tr/min and 1.8 Ncm

Rotation speed 400 rpm and 2.5 Ncm

Rotation speed 400 rpm and 2.5 Ncm

Refill × 3

Long. 21 mm

-

REF 60022269

REF 60022275

REF 60022270

REF 60023493

Long. 25 mm

-

REF 60019594

REF 60022276

REF 60019595

REF 60023492

Long. 15 mm

REF 60019596

-

-

-

-

For more information

10

Orifice Opener 25/.12

Simple shaping kit REF 60022267 REF 60019363

21 mm 25 mm

Glide Path File 10/.05

Preparation File

1 × 25/.12

20/.05

1 × 10/.05 1 × 25/~

OneFile

NEW

Medium shaping kit REF 60022277 REF 60022278

21 mm 25 mm

HyFlex EDM Finishing Kit (Optional) REF 60019364

1 × 10/.05

1 × 40/.04

1 × 20/.05

1 × 50/.03

1 × 25/~

1 × 60/.02

25/~

HyFlex™ EDM Glidepath Files Glidepath HyFlex EDM File 15 / .03 GPF is a very secure solution for complex anatomies of the root canal. ´ Easy instrumentation of very narrow canals ´ Uncomplicated preparation with a limited field of vision in very narrow canals ´ For creating a glide path in difficult anatomy

ENDODONTICS

HyFlex™ EDM Kits

20 +10

HyFlex™ EDM Finishing Files Refill packs - x3 files

HyFlex EDM Finishing File 40/.04

HyFlex EDM Finishing File 50/.03

HyFlex EDM Finishing File 60/.02

REF 60019597

REF 60019598

REF 60019599

BUY 20 - GET 10 FREE* ON HYFLEX EDM REFILLS

EXCLUSIVE OFFER ONLY AVAILABLE FROM YOUR TERRITORY MANAGER

NE W FILE FOR COMPLEX CHANNELS

HyFlex EDM Glide Path File 15/.03, 21 mm REF 60023493 3 x 15/.03

HyFlex EDM Glide Path File 15/.03, 25 mm REF 60023492 3 x 15/.03

11

ENDODONTICS

HyFlex™ EDM Paper and Gutta-Percha Points HyFlex paper and guttapercha points are optimally matched to the HyFlex EDM files and thus contribute to the best possible treatment result. They correspond to the respective sizes and have the perfect taper to dry and obturate root canals previously prepared with HyFlex files precisely and as quickly as possible.

HyFlex EDM guttapercha points are ideal for obturating root canals.

HyFlex EDM paper points are ideal for drying root canals.

´ ´ ´ ´ ´

Precise fit Colour-coded Highest quality assorted or individual sizes ≥ 28mm

HyFlex™ CM GuttaPercha Points Greater Taper HyFlex CM guttapercha points are ideal for obturating root canals which have been prepared with HyFlex CM files.

At the tip of the point the diameter corresponds to the ISO sizes, but then the conicity follows the one from the CM files ≥ 28mm

HyFlex EDM Paper and Guttapercha points selection Size / tape Paper points

100 pcs 20 /. 05 60022742 OneFile 25/~ 60022743 40 /. 04 60022676 50 /. 03 60022741 60 /. 02 60022740 Assortment 20/.05 - 60/.02 60022744

Guttapercha points 60 pcs 60022706 60022707 60022708 60022709 60022710 60022705

HyFlex CM Guttapercha points Greater Taper selection

12

.04 #20

60 pcs

REF 60022689

.06 #30

60 pcs

REF 60022699

.06#45

60 pcs

REF 60022702

.04 #60

60 pcs

REF 60022696

.04 #20-45

60 pcs

REF 60022703

.06 #20-45

100 pcs

REF 60022704

ENDODONTICS

REMOVER The essential piece for your retreatment

One file to remove the canal obturation REMOVER is a single file for the retreatment procedure, bringing methodological reproductibility to retreatments while making them safer.

NEW

Only one file to remove old material Remove the Gutta-Percha in the canal with only one instrument.

Efficient without solvent use The only file on the market clinically qualified to be used without solvent.

Safe instrument Due to its design, its non-cutting tip and its protocol, REMOVER avoids ledges and respects the root canal anatomy and while being effective.

Reduce the learning time REMOVER fits perfectly into an existing retreatment procedure without requiring a change in approach.

It’s an essential tool for retreatment and can be used with conventional shaping files.

MicroMega REMOVER Blister pack of 5 instruments - Sterile B5 MicroMega Remover L19 n30 7% REF 20952301 B5 MicroMega Remover L23 n30 7% REF 20952311

13

ENDODONTICS

MicroMega ONE CURVE

One Curve A SINGLE FILE, IN CONTINUOUS ROTATION

20 +10

Blister pack of 5 instruments - Sterile B5 One Curve n25 L21 4% REF 20949431 B5 One Curve n35 L21 4% REF 20949432 B5 One Curve n45 L21 4% REF 20949433 B4 One Curve L21 Asst REF 20949435 B5 One Curve n25 L25 4% REF 20949441 B5 One Curve n35 L25 4% REF 20949442 B5 One Curve n45 L25 4% REF 20949443 B4 One Curve L25 Asst REF 20949445 B5 One Curve n25 L31 4% REF 20949451 B5 One Curve n35 L31 4% REF 20949452 B5 One Curve n45 L31 4% REF 20949453 B4 One Curve L31 Asst REF 20949455

BUY 20 - GET 10 FREE* ON ONE CURVE

EXCLUSIVE OFFER ONLY AVAILABLE FROM YOUR TERRITORY MANAGER

One Curve Paper points and Guttapercha points ´ The highest Coltene quality standard ´ Paperpoints are machine rolled, glue-free and laser-measured ´

14

Guttapercha Points are latex-free, laser-measured, produced fully automatically, are very suitable for vertical, lateral and thermal condensation techniques, radiopaque, stable and yet flexible enough to adapt precisely to the duct walls, volume-resistant, optimally tissue compatible

MICROMEGA ONECURVE GP 25/.06 SB - 60 pieces

REF 60023612

MICROMEGA ONECURVE PP 25/.06 CP - 144 pieces

REF 60023616

For more information

ENDODONTICS

NOW WITH RECIPROCATING MOVEMENT

Dual Move

REF 52002004

´ Cordless motor, well-balanced in hand and ambidextrous ´

Miniature head, 340° rotative contra-angle

´

Continuous rotation and reciprocating movement

´ Fully customisable ´ Accurate apex localisation ´ Stand alone or combined use

Dual Pex ´ User friendly screen ´ Accurate localisation even in wet and dry root canals, owing to multi-frequency

positioning technology ´

Stable delivered voltage whatever the battery level

´

Real-time visual and sound indications

´ Auto power-off to save the battery ´

Plug & Play self tester REF 51300050

15

ENDODONTICS

The global market leading post system

ParaPost X System ®

´ A complete family of posts for any clinical situation ´ State-of-the-art universal endodontic post system for all direct and casting techniques. ´ S tandardised system with seven sizes including two intermediate sizes Non-end cutting, depth-calibrated drills for precise canal preparation ´ Diamond pattern design, multiple venting channels

Intro Kits Fiber Lux Introductory Kit Metal-free Posts

Taper Lux Introductory Kit Metal-free Posts REF PF180

REF PF170

System Introductory Kit REF P780T XP Titanium posts REF P780 XP Stainless steel posts

Introductory Kit REF P880 XH Titanium posts REF P680T XT Titanium posts

16

System Introductory Kit Casting REF PF781 XP

Dual Curing Composite Based Post Cement and Core Build Up Material

ENDODONTICS RESTORATION

ParaCore ´ 3 indications - 1 material

´ For post cementation, core construction

and cementation of crowns, bridges, inlays and onlays ParaCore Refill Dentin REF 5887 2 × 5ml ParaCore Dentin 1 × 20 Mixing Tip Short Super Fine

ParaCore 5 ml Intro Kit REF 5885 1 × 5 ml ParaCore Dentin 1 × 5 ml ParaCore White 1 × 5 ml ParaCore Dentin SLOW 1 × 5 ml ParaCore Trans SLOW 3 × 3 ml ParaBond Non-Rinse Conditioner + Adhesive A & B 20 × Mixing Tip Short Super Fine

ParaCore Refill White REF 5886 2 × 5ml ParaCore White 1 × 20 Mixing Tip Short Super Fine ParaCore Slow Refill Dentin REF 60011391 2 × 5ml ParaCore Slow Dentin 1 × 20 Mixing Tip Short Super Fine

ParaBond

Etching & Bonding

´ Seals the tooth surface and minimises the risk of

postoperative sensitivities

ParaBond Adhesive Kit, 3 pcs REF 7486 1 x 3 ml Non-Rinse Conditioner 1 x 3 ml Adhesive A 1 x 3 ml Adhesive B

´ Ideal for situations where light might not penetrate,

such as for post cementation, metal crowns, deep cavities

or opaque ceramic

ParaBond Adhesive Refill, 2 pcs REF 7493 1 x 3 ml Adhesive A 1 x 3 ml Adhesive B

´ High shear bond strengths on dentine and enamel ´ Universally applicable with chemically, dual and light-curing materials

SoloCem

Self Adhesive Dual Curing Resin Cement

DuoCem

Strong And Long Lasting Cementation

SoloCem Refill Dentin REF 60014062 1 × 5ml SoloCem Dentin 5 × Mixing Tip Brown Short Super Fine 5 × Mixing Tip Brown Short Fine

DuoCem Refill Dentin REF 60014382 1 × 5 ml DuoCem Dentin 5 × Mixing Tip Short Fine 5 × Mixing Tip Short Super Fine

SoloCem Refill White Opaque REF 60014061 1 × 5ml SoloCem White Opaque / as above

DuoCem Refill White Opaque REF 60014383 1 × 5 ml DuoCem White Opaque / as above

SoloCem Refill Translucent REF 60019840 1 × 5ml SoloCem Translucent / as above

DuoCem Refill Trans REF 60020092 1 × 5 ml DuoCem Trans / as above

17

RESTORATION

Light-Curing Single-Component Universal Bond

ONE COAT 7 UNIVERSAL

Contains MDP - One bond for all indications

´ Self Etch, Selective Etch and Total Etch, a bond for all adhesive techniques ´ With activator for chemically curing products ´ Exceptional bonding values on enamel and dentine

2+1

´ Excellent marginal seal and outstanding marginal leakage tightness ´ Ergonomically shaped, triangular bottle with dropper for fine dosing

BUY 2 - GET 1 FREE* ON 5ml REFILLS

ONE COAT 7 UNIVERSAL Intro Kit REF 60019538 1 × 5 ml ONE COAT 7 UNIVERSAL 1 × 2.5 ml Etchant Gel S 1 × 20 pcs. Application needles 1 × 50 pcs. Brushes black 1 × Mixing well with cover

UNIVERSAL ACTIVATOR 3ml for self and dual cure materials REF 7054 1 x 3ml Activator, 1 x 50pcs. Microblush, black

96%

18

ONE COAT 7 UNIVERSAL Refill REF 60019539

RESTORATION HIGHLIGHT KIT SAVE OVER 50 % ON BUYING INDIVIDUALLY! Restoration Highlight Kit BRILLIANT EverGlow ´ Exceptional polishability and long-lasting brilliance ´ Aesthetic single-colour restorations ´ Ideal handling through smooth consistency ONE COAT 7 UNIVERSAL ´ Self, Selective and Total Etch, a bond for all adhesive techniques ´ Exceptional bonding values on enamel and dentine ´ Excellent marginal seal and outstanding marginal leakage tightness DIATECH ShapeGuard ´ Adapts to any surface ´ Uniform pressure distribution. ´ Tooth morphology preserved ´ Fast, easy and intuitive finishing & polishing ´ Optimised for composite and ceramics

Buy either kit and get

A FREE COMPOSITE INSTRUMENT SET UK promotion only - copy invoice required send to info.uk@coltene.com

Restoration Highlight Kit Syringes REF 60020090 3 x BRILLIANT EverGlow Syringes (3g) (1 x A1/B1, A2/B2, A3/D3), 1 x One Coat 7 Universal Bond 5ml +50 brushes, 2 x DIATECH ShapeGuard brushes for composite (1 x pre-polisher and 1 high lustre)

Restoration Highlight Kit Tips REF 60020091 30 x BRILLIANT EverGlow Tips 0.2g, 10 tips of each, 1 x One Coat 7 Universal Bond 5ml +50 brushes, 2 x DIATECH ShapeGuard brushes for composite (1 x pre-polisher and 1 high lustre)

RESTORATION

The perfect way to try 3 new COLTENE materials

RESTORATION

Universal submicron hybrid composite

BRILLIANT EverGlow® Enduring gloss – made brilliant Thanks to its sophisticated load composition, BRILLIANT EverGlow immediately produces an exceptionally smooth, glossy and satin-finished surface as soon as the filling is put in place. Polishing is simplified and a very aesthetic restoration can be done in no time. In addition, the versatile BRILLIANT EverGlow filling material excels in its enhanced gloss retention.

´ Exceptional polishability and long-lasting brilliance

BRILLIANT EverGlow® BRILLIANT EverGlow® Refill Syringes

BRILLIANT EverGlow® Refill Tips

1x Syringe - 3g

20 x Tip - 0,2

BLEACH

Tips > 60019706

´ Aesthetic single-shade restorations ´ Versatile shade system with three translucency levels

A1/B1

´ Excellent sculptability and smooth consistency ´ Good wettability with minimal stickiness to the instrument

A2/B2

A3/D3

A3.5/B3

C2/C3

3+1

BUY 3 - GET 1 FREE* ON BRILLIANT EVERGLOW

20

Syringe > 60019697

A4/C4

TRANSLUCENT

Syringe > 60019704 Tips > 60019718

BLEACH TRANSLUCENT

Syringe > 60019705 Tips > 60019719

OPAQUE A3

Syringe > 60019745 Tips > 60019748

OPAQUE A1

Syringe > 60019744 Tips > 60019747

OPAQUE BLEACH

Syringe > 60019743 Tips > 60019746

Syringe > 60019698 Tips > 60019707 Syringe > 60019699 Tips > 60019708 Syringe > 60019700 Tips > 60019709 Syringe > 60019701 Tips > 60019710 Syringe > 60019702 Tips > 60019716 Syringe > 60019703 Tips > 60019717

Additional shades coming soon Xtra White Bleach (XWB) White Bleach Translucent (WB Trans) Opaque A2 (OA2) Opaque A4 (OA4)

Watch the video...

BRILLIANT EverGlow® System Kit Syringes

REF 60019722 9 x syringes, 3g 1 x BL, A1/B1, A2/B2, A3/D3, A3.5/B3, C2/C3, A4/C4, BL Trans, Translucent & Shade guide

BRILLIANT EverGlow® BRILLIANT EverGlow Flow provides convincing aesthetic results and is the perfect partner for the universal BRILLIANT EverGlow composite. The aesthetic composite is easy to handle, and suitable for a host of different indications.

RESTORATION

BRILLIANT EverGlow®

BRILLIANT EverGlow® System Kit Tips

REF 60019723 60 x Tips 0.2 g - 5 x BL, 8 x A1/B1, A2/B2, A3/D3, A3.5/D3, 5 x C2/C3, A4/C4, BL Trans, 8 x Translucent & Shade guide

BRILLIANT EverGlow® Flow BRILLIANT EverGlow® Flow 1 × 2g Syringe 5 x Standard application needles 5 x Fine application needles 0.4 mm

BLEACH BL

A1/B1

A2/B2

A3/D3

A3.5/B3

A4/C4

Syringe > 60019752

Syringe > 60019753

Syringe > 60019754

Syringe > 60019755

Syringe > 60019756

Syringe > 60019757

TRANSLUCENT TRANS

Syringe > 60019758

OPAQUE A2 OA2

Syringe > 60019751

3+1

BUY 3 - GET 1 FREE* ON BRILLIANT EVERGLOW FLOW

21

RESTORATION

Flowable dual curing posterior restorative material

Fill-Up!®

10 mm

5 sec.

Fill-Up!® Intro Kit

Deep. Fast. Perfect.

Fill-Up! Intro Kit REF 60019973 2 x 4.5 g Fill-Up!™ Universal 1 x 5 ml OneCoat 7 Universal 1 x 3 ml OneCoat 7 Universal Activator 6 x Mixing tips Short Super Fine 8 x Mixing tips Short Fine

´ Optimal depth polymerisation with minimal shrinkage due to dual curing system. ´ Guaranteed single-layer technique - even in very deep cavities. ´ Optimised sealing of margins - reduced post-operative sensitivity ´ Universal shade in a convenient Automix syringe for efficient placement

Fill-Up!® Refill Fill-Up! Refill

"

Given the move towards less amalgam use there is going to be greater need for suitable alternative materials and composite resin will lead the way. There are likely to be increased use of novel techniques including bulk-fill restorative materials. Fill-Up is one such material that allows rapid cavity filling, easy finishing and a reasonable wear resistance with simple top-up and repair options for long-term maintenance.

"

Professor Brian Millar

REF 60019341 1 × 4.5 g Fill-Up! Universal 3 × Mixing Tip Short Super Fine 4 × Mixing Tip Short Fine

RESTORATION

Temporary Restorations

DuoTEMP® Double security keeps you smiling ´

Dual-curing

´

High marginal seal due to slight expansion

´

Good retention, easy removal

´

Contains zinc oxide and fluoride for additional protection

´

Eugenol-free - no effect on the curing of composites

´

Radiopaque

2+1

DuoTEMP DuoTEMP Single Pack REF 5831 1 syringe of 5 g

BUY 2 - GET 1 FREE* ON SINGLE OR ECO-PACK

DuoTEMP Eco Pack REF 7090 5 syringes of 5 g

SYNERGY®D6 Easy and aesthetic ´ Non-sticky ´ Good sculptability ´ High resistance to the operating lamp ´ Low shrinkage ´ Quick, excellent polishability

3+1

BUY 3 - GET 1 FREE*

SYNERGY D6 SYNERGY D6 Refill - syringe 1 Syringe (4 g/2 ml)

3+1

BUY 3 - GET 1 FREE*

SYNERGY D6 Flow SYNERGY D6 Flow Refill - syringe 1 Refill (2.3 g/1.25 ml)

SYNERGY D6 Refill - tip 1 Pack (10 tips x 0.25 g/0.125 ml)

23

PROSTHETICS

A-silicone impression material

AFFINIS®

PERFECT IMPRESSIONS

´ Innovative surface affinity ´ Outstanding flow properties in wet environment ´ Ideal processing time, perfect oral setting time ´ Excellent readability

ALL AFFINIS REFILLS

4+1

BUY 4 - GET 1 FREE* AFFINIS Putty REF 6531 Fast Putty Soft REF 6530 Putty Soft REF 6535 Putty Super Soft

each 300 ml (base and cat.)

AFFINIS System 360 Refill REF 6482 MonoBody REF 6487 Heavy body REF 6472 Putty

2 x 380 ml (base and cat.)

1 x Fixation Ring

AFFINIS System 50 REF 6501 Light body REF 6590 Heavy body REF 6511 Regular body REF 6601 Fast Light body REF 6611 Fast Regular body REF 6650 Fast Heavy body REF 6775 PRECIOUS Light body REF 6776 PRECIOUS Regular body

2 x 50 ml Cartridge, 12 x Mixing Tips

24

PROSTHETICS

SYMPRESS 2

Ask your Territory Manager about our

FREE SYMPRESS 2 OFFER

25

PROSTHETICS

A-Silicone impression material

PRESIDENT The Original A SMALL STEP FOR DENTISTS. A GREAT STEP FOR DENTISTRY. ´ High tear strength and elasticity ´ Optimised flowing behavior and thixotropy ´ Easier-to-mix putties

PRESIDENT The Original Putty

´ New and more contrasting colours ´ New consistencies

Putty Putty soft Putty soft fast Putty super soft 2× 2×

Putty

Putty soft

Putty soft fast

60019942 60019943 60022166 60019944

300 ml spoons

Putty super soft

Light cartridge 50 ml Regular body

Light body

Xtra light body

Regular body Light body Xtra light body

60019939 60019938 60019937

2 × 50 ml 12 × mixing tips universal

System 360 MonoBody Heavy body 2×

26

380 ml

60019946 60019948

Product discontinuation coltex®, coltoflax® and RAPID

JET BLUE BITE ´ Stays right where you want it

Speedex®

´ No resistance to closure, no rebound

The C-silicone with A-silicone quality

´ Excellent handling and fast setting

3 become 1

PROSTHETICS

A-Silicone bite registration material

´ High end (89 Shore A), yet flexible for easy trimming ´ Two setting times available

´ One for all: the Speedex Universal Activator for all wash and tray materials

´ Choose the setting time:

´ New Speedex putty soft material impresses with outstanding final hardness

Fast: 30s working time, 40s oral setting time

´ You can customise the working time by increasing or reducing the amount

Superfast: 20s working time, 30s oral setting time

JET BLUE BITE Fast 50ml Refill REF 6491 Single Pack 1 x 50 ml Cartridge 6 x Mixing Tips Pink 6 x Spreader Tips JET BLUE BITE Super Fast Refill REF 6493 Single Pack 1 x 50 ml Cartridge 6 x Mixing Tips Pink 6 x Spreader Tips

of activator paste

4+1

BUY 4 - GET 1 FREE*

Look inside Coltex®, Coltoflax® and RAPID refill packs for the promotional code to use at speedex.coltene.com 27

ROTARY INSTRUMENTS

Multilayer diamond instruments

DIATECH®

DIATECH® Kits COMPOSITE PREPARATION AND FINISHING KIT REF 250059AA This kit comprises 12 Multilayer FG Diamonds in 2 different grit sizes, 2 Silicone polishers and 1 polishing brush for contra-angles. The diamond coated cutting surface of these instruments is pointed at an angle of approximately 95°. The range of applications of these diamonds covers trimming, contouring and finishing the occlusal surfaces of composite restorations and finishing porcelain inlays and onlays chairside. The polisher as well as the polishing brushes provide the surface with a tooth-like enamel gloss.

COMPONEER PREPARATION AND FINISHING KIT by Dr. Mario Besek REF 60013844 Prep, Finish, Polish! The selected, coarse, blue-coded diamonds are ideally suited for prep-work, the finer red and white coded diamonds for finishing and contouring. The specially designed finest diamond (orange) and the polishers improve the quality of margins and surface gloss.

Diamond Instruments

Multiple layered diamond instruments have a uniform coverage of natural diamond on different levels, especially at the all-important tip. New diamond grits with sharp edges will, therefore, be exposed for use during procedures as the outer layer wears.

10 + 4

BUY 10 - GET 4 FREE* (price group 1 burs only) = Price group 1

TOP 13 UK KIT TOTALLY AESTHETICS KIT

By Dr. Monik Vasant REF 60023603 Now updated to include new products from the Diatech family including DIATECH® ShapeGuard

28

REF 250052AA 13 of the most popular bur patterens purchased

by UK dentists for Crown and Bridge preparation, Composite contouring and Finishing.

Kit contains 26 burs (2 of each)

838 009 3 838 010 4 838 012 4 838 014 4 839 010 839 012 839 014 842 014 12 845 010 4 845 012 4 845 014 4 845 016 4 845 023 5

200272AA

200273AA

200275AA

200276AA

200278AA

200280AA 200279AA

200282AA

200284AA 200283AA

200288AA

200290AA 200289AA

200291AA

200294AA 200293AA 200292AA

200295AA

X X

FGS* 845R 016 4 846 012 6 846 014 6 846 016 6 846 016 7 846 018 7

200305AA

200306AA

200309AA 200308AA

200311AA

845R 025 4

X

X

ISO 158…014

ISO 109…014

837R 012 8

200799AA

828 022 1

200211AA 200210AA

200798AA

200103AA

200105AA

200106AA

200108AA

200109AA

200111AA

200112AA

200116AA

200115AA

805 018 1.6

X X X

ROTARY INSTRUMENTS

ISO 048…026

ISO 048…022

200101AA

805 016 1.4

200267AA 200266AA

X

ISO 109…012

818 025 0.7

ISO 171…018

835 012 4

60021818 200206AA

813 018 2

ISO 158…012

X

805 014 1.4

200265AA 200264AA

805 012 0.9 200113AA

805 010 0.8

ISO 042…025

802 018 2.3

200145AA

ISO 032…018

802 016 2.3

ISO 109…010

200143AA

ISO 032…014

802 014 2.3

205015AA

835 010 4 200203AA

ISO 108…009

200141AA

ISO 032…010

802 012 2.3

200100AA

200097AA 200096AA 200095AA 200099AA 200098AA

200094AA

200090AA 200089AA 200088AA 200092AA 200091AA

200087AA

200086AA

200083AA

802 009 2.3

ISO 111…018

835 009 3 200201AA

ISO 108…008

200140AA

ISO 039…048

200079AA 200078AA

801 033

ISO 171…016

837 018 8

205014AA 200260AA 200259AA

X

ISO 111…016

835 008 3 200198AA

ISO 552…021

200138AA

ISO 039…037

ISO 038…033

ISO 038…031

ISO 225…018

ISO 225…016

ISO 225…012

ISO 225…010

ISO 019…016

ISO 019…014

200077AA

200081AA

FG MLX FG ML FG F FG XF FG UF FG Topspin

801 027

ISO 171…016

837 016 8

205013AA 200258AA 200257AA

ISO 111…014

834 021 6.8 200191AA

ISO 552…016

813 014 1.5

ISO 171…014

837 014 8

200255AA 200254AA

837 012 8

ISO 171…012

ISO 111…012

834 016 6.8 200190AA

813 010 1.5

200304AA

837 012 7 200252AA 200251AA

ISO 110…012

200137AA

205007AA

200136AA 200135AA

811 048 8

ISO 544…025

836R 014 6 200250AA 200249AA

ISO 234…026

ISO 234…020

200134AA

811 037 7

**

200819AA 200820AA

836R 012 6

830L 026 7 200189AA

830L 020 5

**

ISO 544…016

X ISO 157…014

200188AA 200187AA

ISO 234…018

200131AA

811 033 5

200243AA 200242AA

836R 010 6

ISO 157…012

200186AA

ISO 234…016

200130AA

200127AA

811 031 4.2

ISO 170…023

836R 008 6

830L 018 5

200241AA 200240AA

ISO 157…010

200184AA 200183AA

830L 016 5

ISO 170…016

836 018 6

807 018 5

200239AA 200238AA

ISO 157…008

830L 014 5

200237AA 200236AA

ISO 234…014

ISO 234…012

200126AA

807 016 4

ISO 170…014

ISO 170…012

836 016 6

200182AA

200181AA 200180AA

830L 012 4

ISO 110…018

830L 010 4

807 012 3.5

205010AA

836 014 6

205009AA 200232AA 200231AA

X 200177AA 200176AA 200179AA

ISO 234…010

200124AA

807 010 3.5

ISO 110…016

200174AA

ISO 233…016

806 016 2.5

ISO 110…014

830 016 2.7

200168AA 200167AA

200123AA

X X

801 023

ISO 170…010

836 012 6

205008AA 200230AA 200229AA

835R 014 4

200228AA 200227AA

X

ISO 110…012

ISO 233…014

806 014 2.2

200226AA

830 014 2.7

200165AA 200164AA 200166AA

ISO 019…012

X X X

801 020

ISO 113…014

835R 012 4 ISO 156…014

806 012 2.2

801 018

ISO 150…014

835R 010 4 200122AA

806 010 2.2

X X X X

801 016

ISO 150…012

FGS* ISO 233…012

ISO 019…010

X

200223AA 200222AA

830 012 2.7

200162AA 200161AA

200121AA

X X

801 014

ISO 150…010

FGS* FGXL*

ISO 156…012

ISO 233…010

ISO 019…009

ISO 010…023

X

200221AA 200220AA

835R 008 3

801 012

ISO 139…014

830 010 2.7

200160AA

200120AA

806 009 2.2

ISO 156…010

ISO 233…009

200117AA X

200219AA 200218AA

830 009 2.7

200158AA

ISO 048…030

801 010

ISO 139…012

828 030 1

200797AA

805 023 2.1

ISO 156…008

ISO 109…016

FG MLX FG ML FG F FG XF FG UF FG Topspin Head Shape Code ISO Ø 1/10 mm Head Length

200217AA 200216AA

835 016 4

200212AA

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin FGS* FGL* FGXL*

ISO 139…010

ISO 138…009

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin 801 009

200297AA 200296AA

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin Head Shape Code ISO Ø 1/10 mm Head Length

828 026 1

FGS*

835 014 4

X

837R 014 8

X

X

29

ISO 010…018

ISO 010…016

ISO 010…014

ISO 010…012

ISO 010…010

ISO 002…018

ISO 002…016

ISO 002…014

ISO 002…012

ISO 002…009

ISO 001…033

ISO 001…027

ISO 001…023

ISO 001…020

ISO 001…018

ISO 001…016

ISO 001…014

ISO 001…012

ISO 001…010

ISO 001…009

30 863 012 10 863 014 10

200560AA 200559AA 200562AA 200561AA 200564AA 200563AA

FGS* 868 014 8 873 014 2 874 008 3 874 010 2 874 012 2 877 010 6 877 012 6 877K 012 6 877K 014 6

200602AA

X 200604AA

877K 018 6 878 010 8 878 012 8 878 014 8 200619AA

877K 021 6 200617AA 200616AA

862 012 8

ISO 249…016

ISO 200…018

200406AA

862 014 8

X

200414AA

200413AA

855 010 6

200486AA

200403AA 200402AA 200405AA 200404AA

ISO 197…012

ISO 197…010

ISO 164…008

200363AA

200362AA

200762AA 200761AA

200360AA

205031AA 200358AA 200357AA ISO 164…014

ISO 164…016

205029AA 200355AA 200354AA ISO 164…012

849 009 4

200551AA 200550AA 200549AA 200553AA 200552AA

FGS* FGXL*

ISO 289…014

856L 018 11

ISO 200…016

200401AA

205027AA 200351AA 200350AA ISO 164…010

848R 016 10

200485AA

200398AA 200397AA 200400AA 200399AA

200408AA 200407AA

853 008 3.5

ISO 249…014

ISO 199…018

852 016 6

205060AA

200471AA 200470AA 200469AA

852 014 6

200548AA 200547AA

ISO 249…012

852 012 6

ISO 289…012

862 010 8 200544AA 200543AA 200546AA 200545AA

856L 018 10

ISO 289…010

ISO 199…018

852 010 6 200396AA

200348AA 200347AA 200346AA

ISO 219…016

848L 018 12

200615AA 200614AA

860 014 5

205059AA 200468AA 200467AA 200466AA

856L 016 10

ISO 249…010

ISO 199…016

851 016 8 200391AA

200345AA 200344AA 200343AA

ISO 219…012

200342AA

848 031 10

200540AA 200539AA 200542AA 200541AA

200465AA 200464AA

ISO 199…014

851 012 8 200390AA

ISO 199…014

848 023 10

ISO 297…021

ISO 247…014

200462AA

ISO 199…012

850N 014 10 200389AA

200760AA 200759AA

848 018 10

200611AA 200610AA

877K 016 6

200531AA 200530AA 200532AA

860 012 6.5

ISO 297…018

ISO 248…012

856L 014 10

200609AA 200608AA

860 012 5 200529AA

856L 012 10

ISO 297…016

859 024 10

200461AA

856 025 8

ISO 245…012

ISO 198…025

ISO 197…025

ISO 198…021

ISO 200…018

848 016 10

200526AA 200525AA 200527AA

856 025 7 200864AA

205057AA

205055AA 200457AA 200456AA 200455AA

205053AA 200454AA 200453AA 200452AA 60019346

850L 018 12 200388AA

848 014 10

ISO 297…014

859 021 10

ISO 166…024

ISO 166…021

X

200520AA 200519AA 200522AA 200521AA

859 018 10 200518AA

856 021 9

ISO 297…012

ISO 288…012

ISO 166…018

ISO 198…018

200338AA 200337AA

848 012 10

200606AA 200605AA

876 010 5

200592AA

859 016 10

200514AA 200513AA 200517AA 200516AA

856 018 9

205052AA 200451AA 200450AA 200449AA 60019345

ISO 200…016

200336AA

205023AA 200335AA 200334AA ISO 198…018

ISO 199…023

205021AA 200333AA 200332AA ISO 199…018

847R 018 8

ISO 288…010

859 014 10

200590AA 200589AA

ISO 166…016

200387AA 200386AA

850L 016 12

200512AA

X

ISO 287…010

ISO 198…018

200383AA

205039AA

205037AA 200382AA 200381AA 200380AA

200327AA 200326AA 200325AA

200330AA 200329AA 200328AA

200324AA

847R 016 8

200585AA

859 014 9

856 018 8

200448AA 200447AA 200446AA

856 016 9

200584AA

ISO 166…014

X

60019344

ISO 198…016

ISO 198…016

205035AA 200379AA 200378AA 200377AA

850 023 10

200509AA 200508AA 200511AA 200510AA

200443AA 200442AA 200441AA

ISO 197…016

ISO 199…016

ISO 199…014

ISO 199…012

200315AA 200314AA

847 028 8

ISO 534…012

859 012 10

205049AA 200445AA 200444AA

856 016 8

200440AA 200439AA 200438AA

850 018 8

200583AA

X

ISO 166…014

856 016 7

200930AA

859 010 10 ISO 166…012

ISO 166…010

205033AA 200376AA 200375AA

200374AA 200373AA

850 018 10

200507AA 200506AA

858 016 8

847 025 8

ISO 534…010

X 856 014 9

200503AA 200502AA 200505AA 200504AA

ISO 198…014

200372AA 200371AA

ISO 196…025

200313AA

X

847 018 8

200580AA

X

850 016 10

ISO 535…008

858 014 8 200437AA 200436AA

850 014 10

847 016 8

ISO 162…014

ISO 165…016

ISO 198…014

850 012 10

200499AA 200498AA

856 014 8

200435AA 200434AA

ISO 198…012

200366AA 200365AA

ISO 196…016

847 014 8

ISO 198…014

ISO 165…014

856 012 8

200433AA

ISO 197…016

200364AA

FG MLX FG ML FG F FG XF FG UF FG Topspin

847 012 8

200921AA

864 014 12

200577AA

863 016 10

200575AA

858 012 8

200495AA 200494AA 200497AA

FGS*

ISO 251…014

856N 016 8

200573AA 200572AA

X

ISO 165…012

855 016 6

200418AA

ISO 197…014

849 025 4

200491AA 200490AA 200493AA 200492AA

855 014 6

200417AA 200416AA 849 016 4

205070AA

Head Shape Code 856N ISO Ø 1/10 mm 014 Head Length 8

846R 016 6

ISO 250…016

FGS*

ISO 198…016

ISO 198…014

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin X

200480AA

200477AA 200476AA

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin FGS* FGL* FGXL*

ISO 250…014

ISO 250…012

FG MLX FG ML FG F FG XF FG UF FG Topspin

846 023 7

200569AA 200568AA 200567AA 200570AA

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin

ISO 196…012

ISO 196…009

ISO 553…016

ISO 174…018

ISO 173…031

ISO 173…023

ISO 173…018

ISO 173…016

ISO 173…014

ISO 173…012

ISO 546…018

ISO 546…016

ISO 172…028

ISO 172…025

ISO 172…018

ISO 172…016

ISO 172…014

ISO 172…012

ISO 545…016

ISO 171…023

ROTARY INSTRUMENTS

Head Shape Code ISO Ø 1/10 mm Head Length 849 012 4

855 012 6

X

856XL 016 12 856XL 018 12

X

862 016 8

ISO 578…007

ISO 262…007

838M 007 2.4 889M 007 2.4

200976AA

200977AA

860 012 10 864 014 12 ISO 508...021

ISO 508...018

ISO 508...018

856P 018 8 856P 021 8 878KP 018 8 878KP 021 8

215615AA 215614AA

215618AA 215617AA

X

215609AA

379 023 4.2 392 016 6 392 016 8 392 018 8

200053AA

909 040 1.5

6054 018 6

909 045 1.5

6055 018 8

**

909 055 2

ISO 257…016

200691AA

200693AA 200692AA 60022504

X

205094AA

200696AA 200695AA 200694AA

881 012 8 881 014 8

X

ISO 141…014

ISO 141…012

ISO 141…010

ISO 140…014

ISO 140…012

ISO 299…021

ISO 299…018

ISO 299…016

ISO 299…014

ISO 299…012

ISO 290…016

ISO 290…014

ISO 290…012

ISO 298…021

ISO 298…018

ISO 298…016

ISO 298…014

ISO 298…012

ISO 298…010

ISO 289…016

ROTARY INSTRUMENTS

** ISO 068…055

881 010 8

200005AA 200004AA 200007AA 200006AA

200757AA 200756AA

ISO 6056…018

**

205093AA

X

ISO 068…045

880 014 6

200071AA 200070AA

6053 018 10

200754AA 200753AA

X ISO 6055…018

200684AA 200683AA

X

200069AA 200068AA

905 031 3.1

ISO 068…040

205092AA 200680AA 200679AA

X

200752AA 200751AA

ISO 017…031

205091AA 200675AA 200674AA

880 012 6

ISO 6054…018

200745AA 200744AA

ISO 017…027

205089AA 200671AA 200670AA 200669AA

879K 021 10

200065AA 200064AA

6052 018 8

ISO 6053…018

905 027 2.9

200063AA 200062AA

6051 018 6

200742AA 200741AA

905 023 2.7

ISO 6052…018

ISO 017…023

879K 018 10

200061AA 200060AA

392 021 10

200738AA

899 027 7

ISO 6051…018

200664AA

205088AA 200668AA 200667AA

200660AA

879K 016 10

200059AA 200058AA

898 016 11

ISO 033…027

879K 014 10

200655AA

205085AA

879K 012 10

200737AA

ISO 213…016

ISO 894…009

ISO 211…018

200654AA 200653AA 200652AA

200651AA 200650AA 60022503

205084AA

879 016 10

ISO 465…021

200736AA

889 009 3.5

ISO 465…018

200733AA 200732AA 200734AA

886K 018 9.5

ISO 465…016

886 016 10 200730AA

205103AA

ISO 131…016

ISO 131…014

205082AA 200645AA 200644AA 200643AA

205080AA 200642AA 200641AA 200640AA

879 014 10

200056AA

390 014 3 200051AA 200050AA

379 023 5

ISO 465…016

205102AA 200726AA 200725AA 200724AA

200723AA 200722AA 200721AA

886 014 10

200048AA 200047AA

ISO 270…014

ISO 277…023

ISO 131…012

ISO 130…014

205078AA 200639AA 200638AA 200637AA

200636AA 200635AA 200634AA

200633AA 200632AA

879 012 10

200044AA 200043AA 200046AA 200045AA

200039AA 200038AA 200037AA 200041AA 200040AA 205005AA

200034AA

886 012 10

ISO 508...018

379 018 3.5

878K 021 8

215606AA

379 016 3.5

TAPERED SIZES WITH PIN

885 014 8 200719AA 200718AA

200715AA 200714AA 200713AA

X

ISO 277…023

ISO 277…018

ISO 130…012

X

878K 018 8

200036AA

379 014 3

200033AA

885 012 8

200711AA 200710AA

ISO 129…012

200620AA

200631AA 200630AA

FG MLX FG ML FG F FG XF FG UF FG Topspin

878K 016 8

ISO 251…014

ISO 277…016

884 012 6

200705AA 200704AA

ISO 142…014

ISO 142…012

X

60013776

368 023 5

200030AA 200029AA 200031AA

200702AA

205096AA

882 014 10

878K 014 8

ISO 250…012

FGS* ISO 277…014

882 012 10

200701AA 200700AA

ISO 141…016

X

200025AA 200024AA 200026AA

ISO 257…023

X 205095AA

FGS* FGXL* ISO 257…020

200699AA 200698AA 200697AA

FGS* FGL* FGXL* 878K 012 8

60013866

368 020 5

200011AA 200010AA 200013AA 200012AA

ISO 257…018 881 016 8

878K 010 8

200016AA 200015AA 200014AA 200018AA 200017AA

368 018 4

200009AA

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin 878 016 8

ULTRA FINE GRIT

ISO 001…009

801M 007 0.6

200975AA

MICRO BURS

Head Shape Code ISO Ø 1/10 mm Head Length

FG MLX FG ML FG F FG XF FG UF FG Topspin Head Shape Code ISO Ø 1/10 mm Head Length

368 016 3.5

6056 018 10

X

DIATECH Burs

Pack contains 5 burs

31

MEET THE TEAM UK OFFICE - SUSSEX Debi Boynton 07764 327 425 North West (Scotland - Postcodes: DG, FK, G1 – G8 , KA, ML, PA, PH)

Mark Allen

Nic Coomber

07787 570 517 Managing Director

01444 235 486 - Ext 226 National Account Manager & Marketing Strategist

Nick O’Keeffe

Helen Chart 01444 235 486 - Ext 227 Finance & Office Manager

Sue Robins

07889 227 424 North East (Scotland - Postcodes: AB, DD, EH, HS, IV, KW, KY TD, ZE)

Emma Gilks

Shah Monnan

00353 8641 35766 Ireland

07906 749 682 West Midlands & North Wales

Andrew Miller

Kelly McCormack

Louise Fish

07788 583 057 South Wales & West Country

07818 424 210 North, West & Central London

07788 146 130 South London & South Coast

Alicia Franks

005029 09.19

*Free stock supplied by dealer unless stated otherwise.

005835 06.20

07712 407 071 Essex & East London

01444 235 486 - Ext 223 Office Administrator

All promotional offers valid to 30.09.2020

© 2020 COLTENE Printing errors mistakes and changes reserved.

Chris Nolan

07786 965 019 East Midlands

T 0800 254 5115 | info.uk@coltene.com | www.coltene.com COLTENE Limited, The President Suite A, Kendal House, Victoria Way, Burgess Hill, West Sussex RH15 9NF