Every Truss Sets Up Faster With WizardPDS® Automation

Convert set up time to build time with the WizardPDS® Perimeter Definition System. The speed, accuracy, and setup efficiency of WizardPDS® maximizes your potential for larger and complex jobs. No more inefficient, manually jigged or make-do ways of building complex portions of your jobs; an ever increasing percentage of what you do.

Vertically aligned pins provide uniform clamping force distribution for SUPERIOR jig fixturing and PERFECT heel height control. Featuring (2) independent and automated pins per channel, channels spaced avg. 24” o.c. and NO manual jigging. WizardPDS® is the single greatest investment you can make to increase plant profitability.

2018 Clark Mini Barn Press, builds rigid frames for sheds from 8 foot to 14 foot spans, to 3′-6″ height. Builds mansard and rafter shapes. Includes (5) track mounted heads with 8″ x 10″ platens, material clamps, 10 HP hydraulic power unit with manifold for air and fluid, ball valve controls, mounting track and all available jigging. 460 volt, 3 phase electrical required.

$19,997 FOB TX

Wood Tech Systems

765-751-9990 www.woodtechsystems.com

Horizontal Truss Stacker

Model HVS, Two Unit, 2-Zone, 14’ Horzontal Stacking System. Two lifting units (one master and one slave) with integral electrics. A truss sensing system consisting of adjustable laser sensors mounted on slide rails. One indoor electric control enclosure & panel w/PLC and manual controls. A stacker-conveyor interface package comprised of (1) mounted 3-push button enclosure and (1) remotely mounted 2-push button enclosure (pause/ emergncy stop). Hand-held Wampfler

Remote Control System. 8 stacking rails and 4 stripping posts. Stack 1 5/8” thick x 14’ tall trusses up to 30 high. Stack a truss in approximately 40 seconds (cycle time). Stack up to 55’ or longer trusses on each side of the conveyor with minor assistance for truss sag, shorter lengths can be stacked unassisted. Excludes 77’ Walk Through Conveyor System. Two systems available at $25,000 NOW $19,900 Each. FOB NE.

Wescana Floor Truss Machine

• 7' x 40' Table with 3/4" Steel Table Top

• Two 5' Park Sections

• Truss Depths from 12" to 26"

• Truss Flip-Over Arms

• Side or End Ejectors

• Bui lt-In Camber for Clamping on Both Sides

• Air Cylinders Under Table

• 1 Contr ol Valve for FlipOver Arms

• 1 Control Vlave for Ejectors

• 24" Diameter x 1" Wall

Thickness Roller

• 10 HP / 3 Phase Gear Motor

• Front & Rear Emergency Shut-Off Bars

• Joystick Control

• 2' per Second Travel Speed

Wasserman & Associates

800-382-0329 www.wasserman-associates.com

The 2018 75′ Roof Truss Gantry System with Wizard Automation

MiTek Canada 75′ continuous top, end eject roof truss gantry system with Wizard automated jigging. Features (18) table sections with ejector rollers, (34) rails of Wizard automation at 24″ OC spacing for approximately 68′ of automation, (1) 8′ park stations, (1) 8′ park station with integrated conveyors leading to final roller, (1) table guided, pendant controlled gantry head, (1) 24″ diameter finish roller press, (8) 14′ interior idler rollers, (8) 14′ interior powered rollers, (13) short (approx. 7′) idler conveyors, and (4) 14′ 3-roller idler beds with an additional (2) powered rollers and (2) idler rollers outside.

208V, 3 phase power required.

$674,990 FOB CA

• 2 Contr ol Valves for Clamping

800-382-0329

We create transformative website and app experiences

Since 2006, we've been helping businesses of all kinds build their online presence. We make websites and software for the construction industry to empower companies to reach a wider customer base and engage their audiences. Companies all around the world work with us to make websites and apps that people actually want to use. Reach out to Wolf X Machina if you're a business and you want a website that actually drives results.