Midwest #11, 2011 by Construction Equipment Guide

$3.00

Published Nationally

Midwest Edition

May 28 2011 Vol. XVIII • No. 11

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

MnDOT: Stadium Road Upgrades to Cost $131M By Patrick Condon ASSOCIATED PRESS

CAW GC Holds Meet and Greet Expo...10

Annual IAAP Convention a Big Success...16

ST. PAUL, Minn. (AP) The Minnesota Vikings and Ramsey County face a $131 million hole in their $1.1 billion football stadium plan at the Capitol, the amount that state and county transportation officials agreed May 18 it would cost to fix up roads near the proposed suburban site. That’s less than the $175 million originally estimated by the state Department of Transportation, but still nearly half of the $300 million that Gov. Mark Dayton and key legislators insist is the cap on the state’s contribution to the stadium construction. The deal between the Vikings and Ramsey County officials initially assumed the state would contribute both $300 million and whatever transportation improvements are necessary. That wasn’t the only obstacle facing the Vikings in their stadium push. Rep. Morrie Lanning, the bill’s chief House sponsor, said no stadium bill would start moving through the legislative committee process until after Dayton and GOP legislative leaders reach a still-elusive deal on the state budget. Those talks remained stalled May 18, and with lawmakers required to adjourn their regular session on May 23 the prospects were increasing that both the budget and the stadium issue would get pushed into a special legislative session. The initial disagreement over road improvement costs between the Minnesota Department of Transportation and road officials in Ramsey County had slowed stadium talks in recent days. In a letter to Dayton, state Transportation Commissioner Tom Sorel said it would cost $86 million for highway improvements and another $45 million to improve adjoining roads and interchanges. Team vice president Lester Bagley said he was glad the state and county settled on a final number for transportation costs and hoped it would see UPGRADES page 28

Murph y Tr actor Op ens New Faci lit y in KC. ..3 0

Table of Contents ............4 Attachments Section31-35 Crushing, Screening & Recycling Section ....37-47

On the Rise...

Mike Rowe Speaks Truck Maker Volvo’s Q1 to Congress About Profits More Than Double Manufacturing Jobs

Truck & Trailer Section .... ..................................67-76

By Karl Ritter

Auction Section ......82-95

STOCKHOLM (AP) Swedish truck maker AB Volvo saw profits more than double in the first quarter as demand for heavy vehicles improved worldwide, the company said April 27. The maker of Volvo, Mack, Renault

Business Calendar ........86 Advertisers Index ..........94

The cost to fix roads near the proposed new Minnesota Vikings’ stadium complex, shown here in an artist’s rendering provided by the Minnesota Vikings, would be $131 million, according to the Minnesota Department of Transportation.

ASSOCIATED PRESS

and UD trucks raised its outlook for its biggest markets — Europe and North America — where its truck sales were up by 33 percent in the first three months of 2011. Chief executive Leif Johansson said higher volumes and improved productivity helped lift profits. see PROFITS page 80

Mike Rowe, host of the Discovery Channel’s TV program Dirty Jobs with Mike Rowe, testified before the Senate Commerce, Science and Transportation Committee’s hearing on “Manufacturing Our Way to a Stronger Economy” in support of U.S. manufacturing jobs and the Association of Equipment Manufacturers’ (AEM) I Make America campaign. In his testimony, see JOBS page 20

Page 2 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 877-688-2228 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

MOTORGRADERS

SKID STEERS Cat 232B, 2004, UN1671, EROPS, Aux Hyd ......................$22,000

Cat 140M, 2008, N5749, EROPS, A/C, Heat, 14’ Blade, Ripper ......

Cat 236B, 2005, UN2041, EROPS, Heat, HYD Coup ..........$17,000

........................................................................................$305,000

Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000

COMPACTION

PATTEN CONSTRUCTION PRODUCTS

Cat 242B, 2006, W1138, EROPS, Quick Coupler ..............$24,000 Cat 246B, 2005, W1016, EROPS, Heat, A/C ......................$23,000 Cat 246C, 2007, W1613, EROPS, Heat, Man, QC ..............$28,000

Cat CS-433E, 2005, UN2129, OROPS................................$58,000

ID# N4761 $42,000

Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ............$36,000

Cat CP-563C, 1998, UN2209, OROPS, Blade ....................$58,000 Cat CS-563E, 2007, N5618, OROPS, Sm Drum ................$98,000

Cat 247B, 2005, UN1610, EROPS, Heat, Hyd QC ..............$28,000

DOZERS

Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$32,000 Cat 257B, 2004, UN2086, EROPS, Heat, No Door ............$23,000

Cat D3GXL, 2006, N5010, EROPS, A/C, Heat ....................$57,000

Cat 257B, 2005, W0539, Self-Leveling, Man QC ..............$31,000 Cat D4G LGP, 2006, N4970, EROPS, A/C ..........................$63,000 Cat 262B, 2005, W0523, OROPS, Aux Hyd ......................$24,000 Cat D5G LGP, 2006, N4976, EROPS, A/C ..........................$80,000

Cat 267B, 2005, UN1930, Self Leveling, QC ......................$21,000 Cat 277, 2003, UN2127, EROPS, Heat, No Door ..............$19,000

Cat D5K LGP, 2008, N5711, EROPS, Heat, 3rd Valve ......$120,000

ID# UE1013 $110,000

Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$39,000

Cat D5N LGP, 2006, N5104, EROPS, Heat, A/C ................$94,000 Cat D6N XL, 2007, N5477, EROPS, Heat, A/C ................$190,000

TELEHANDLERS

Cat D6R LGP, 2006, UN1810, EROPS, A/C, SU Blade......$235,000 Cat D6R XL, 2006, UN1811, EROPS, A/C, SU Blade ......$229,000

Cat TH360B, 2006, N4761, EROPS, Heat, A/C ..................$49,000

Cat D6R XW, 2001, UN2072, EROPS, A/C, Ripper Hyd ....$95,000

EXCAVATORS

WHEEL LOADERS/LOADER BACKHOES

Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ..........$36,000 Cat 314CL, 2008, N5672, EROPS, Heat, QC ....................$114,000 Cat 315CL, 2007, N5239, EROPS, 10’2” Stick, QC ..........$100,000

Cat 420D, 2006, N4803, EROPS, A/C, E-Stick ..................$46,000

ID# UN1941 $105,000

Cat 420E IT, 2006, N4926, EROPS, A/C, E-Stick................$65,000

Cat 325DL, 2007, N5591, 10’6” Stick, Coupler................$190,000

Cat 420E IT, 2008, UE1253, EROPS, Heat, A/C, E-Stick ....$70,000

Cat 345BIIL, 2002, UE1015, EROPS, A/C ..........................$85,000

Cat 430D, 2004, N3592, EROPS, A/C, E-Stick ..................$49,000

Cat 345CL, 2006, UN1823, EROPS, 12’ 10” Stick, QC ....$260,000

Cat 430D IT, 2005, N4486, EROPS, E-Stick ......................$56,000

TRACK LOADERS

Cat 430E, 2007, N5471, EROPS, Heat, A/C, Ride Cntrl......$87,000 Cat 430E IT, 2006, N5209, EROPS, A/C, E-Stick................$62,000

Cat 953C, 2006, N4827, EROPS, A/C, GP Bucket ..............$95,000

Cat 930G, 2006, UN1922, EROPS, Heat, A/C ..................$122,000

Cat 953C, 2006, N4909, EROPS, A/C, GP Bucket ............$100,000 Cat 953C, 2006, N5135, EROPS, A/C, GP Bucket ............$105,000

ID# N5749 $260,000

Cat 930G, 2007, N5772, EROPS, 2.9 CYD Bkt, Ride Cntl ..$118,000

Cat 953C, 2006, N4907, EROPS, 2.25 CYD GP Bkt ........$105,000

Cat 930H, 2008, N5661, EROPS, Ride Cntl ........................$132,000

Cat 963C, 2005, N4354, EROPS, A/C, GP Bucket ............$140,000

Cat 938GII, 2004, UN1941, EROPS, Heat, A/C ..................$78,000

Cat 963C, 2007, N5429, EROPS, 3 CYD GP Bkt ..............$175,000 Cat 963C, 2007, N5363, EROPS, 3 CYD GP Bkt ..............$170,000

Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $100,000 Cat 924GZ, 2007, N5786, EROPS, Heat, Ride Control ....$110,000 Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ..$110,000

Chad Benz 630-758-1226 benzc@pattenindustries.com

Cat 928GZ, 2007, N5567, EROPS, Heat, A/C ..................$112,000 Cat 906H, 2009, W1917, EROPS, Heat, A/C, Ride Cntl......$73,000

ID# N5290 $185,000

CALL 887-688-2228

Cat 950H, 2007, N5284, EROPS, Heat, Ride Cntrl ..........$182,000

INVENTORY CHANGES DAILY

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 3

320 Briscoe Drive Morris, Illinois 60450 Toll Free: (800) 941-2133 Email: sales@iltruck.com

www.iltruck.com

RENTAL FLEET REDUCTION SALE

UNUSED 2008 Screen Machine Scalper 107T, Cummins B3.3 80HP diesel, two 5’x7’ double deck screens, 10’ 10” low feed height, Cat 312 U/C, 42” variable speed under screen transfer belt, 42” main discharge belt, Remtron wireless remote control, 44 hrs ..........................$129,500

1973 Cat 815A, 4- 38” padfoot drums with cleaners, canopy, Cat 3306 10.5L 170HP diesel, 11’ 9” hydraulic leveling blade, 40,058 lbs, meter reads 2269 hrs ........................................................$37,500

1987 Cat 815B, rebuilt transmission, 4- 38” padfoot drums with cleaners, canopy, Cat 3306-B 10.5L 216HP turbo diesel, 12’3” hydraulic leveling blade, 44,170 lbs, 3523 hrs ............................................................$89,500

2010 Screen Machine Might II, 4,700 lbs., 26HP Yanmar diesel, 1 yard 7’ 6” wide hopper, high speed 22 blade shredder hammermill, 3’ x 4’ heavy duty trammel screen, 18” conveyor, 52 hours..........................$34,500

2009 Bomag BW278 AD, 78” vibratory double drum smooth compactor, canopy, Cummins QSB4.5 Tier 3 130HP diesel, 27,060 lbs, joystick controls, front and rear spray system, 254 hrs ............................$94,500

2004 Cat 953C, cab with A/C, Cat 3126 121HP diesel, 20” pads, 2.5 yard GP bkt, 2 lever controls, 33,400 lbs, 4016 hrs ..................................................$64,500

1986 Taylor TE 300M, cab, Detroit diesel, 30,000 lb. capacity, 180” mast height, 101” x 96” carriage, 8’ forks, sideshift, 12.00x20 tires, 39,550 lbs., 7,848 hours ..............................................................$39,500

2004 John Deere 650H XLT Pipelayer, canopy, JD4045T 90HP diesel, 8’ 9” blade, 18” pads, hydrostatic transmission, 430 hrs ..........................$87,500

2001 New Holland RG100, cab w/AC, New Holland 450T/PD 108HP diesel, 4WD, 12’ moldboard, 15-19.5 tires, powershift, 1864 hrs ............................$46,500

2008 JCB 506-36, UNUSED, canopy, JCB444 85HP diesel, 4WD, 6,000# capacity, 36’ reach, 48” x 48” carriage, 13.00-24 foam filled tires, 3 mode steer, aux. hydraulics, 36 hours ..............................$44,500

2000 Terex TA35, cab w/AC, Detroit Series 60 365HP diesel, 35 ton capacity (27.5 yards), 6WD, 26.5x25 tires, 61,065 lbs, maintenance recored available ........ ........................................................................$59,500

UNUSED 2007 Sterling 360, 260HP Mercedes diesel, Eaton Fuller 6 speed, 10 yard Heil contractors dump box, 31,000# GVWR, 12,000# front, 19,000 rear, 11R22.5 tires, A/C, cruise, air brakes, 1115 miles ...... ......................................................................$54,500

2006 Hitachi ZX240 LC, cab with A/C, 188HP Isuzu AH-4HK1X diesel, 12’10” stick, 32” pads, 60” bkt, 54,650 lbs, 1266 hrs ....................................$124,500

2006 Ford F750, Cummins ISB215HP diesel, 6 speed Eaton Fuller, 26,000# GVWR, 10,000# front, 26,000# rear, 11R22.5 tires, 158” WB, air brakes, air controls, A/C, cruise, 2000 gallon Valew tank, front, side and rear discharge, top and bottom fill, hose reel, 7579 miles ..............................................................$42,500

2005 John Deere 230C LC, cab with A/C, 180HP JD6068HT diesel, 12’10” stick, 32” pads, 54” bkt, 54,201 lbs, 1945 hrs ........................................$104,500

2002 Terex TA35, cab with A/C, Detroit Series 60 365HP diesel, 35 ton capacity (27.5 yards), 6WD, 26.5x25 tires, 61,065 lbs., needs transmission work, 3,806 hours....................................................$29,500

Page 4 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

Founder, Publisher & CEO Vice President Emeritus Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

FEATURES…

CAWGC HOLDS 2ND ANNUAL MEET & GREET EXPO IN JOLIET More than 150 people attended the event that featured indoor and outdoor displays from 23 exhibitors.

SEMINARS, EXPO HIGHLIGHT SUCCESSFUL 43RD ANNUAL IAAP CONVENTION

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

The all-day event was filled with informative seminars and the expo gave members a chance to network.

TAKEUCHI-US NAMES NEW DEALERSHIP IN MIDWEST REGION

MONROE COUNTY GROUP REMOVES I-69 FROM ITS HIGHWAY PLANS

Wakarusa Heavy Equipment, located in Wakarusa, Ind., is staffed by professionals with extensive backgrounds in the industry and boast years of experience with both light and heavy construction equipment.

MURPHY TRACTOR & EQUIPMENT HOSTS KANSAS CITY GRAND OPENING

The new 45,000 sq. ft. facility, located at 8600 NE Parvin Rd, one mile east of Interstate 435, sits on 9.5 acres and includes 11 service bays, large parts and sales departments, a spacious equipment yard and easy truck access.

55 82

POWERS AUCTION SERVICE HOLDS RENTAL FLEET SALE IN WAUKEGAN

Highlights of the auction included a 2001 Case 9007B excavator and 2007 Hyundai HL740-7 wheel loader that each sold for a winning bid of $56,000.

79 CLASSIFIEDS 86 BUSINESS CALENDAR 90 COMING AUCTIONS

EQUIPMENT… 82

60 JCB 512-56 Telescopic Handler 66 KUBOTA RTV900XT Utility Vehicle

Hal Ewing Joseph S. McKeon Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon • Missouri • Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Contact

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

TEREX BID-WELL RECOGNIZES 50 YEARS OF BUSINESS WITH KIEWIT CORPORATION

In 1961, Terex Bid-Well ushered in a new era in bridge paving with a revolutionary machine that paved decks laterally to deliver more flexibility for bridge design and improve surface smoothness.

Edwin M. McKeon Sr.

• Illinois • Wisconsin • Northwest Indiana

Lawyers representing I-69 opponents sent policy committee members a 23-page letter arguing against including the extension in the local plan.

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2010, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 5

Komatsu D65EX-15, ’05, 4780 hrs ........$129,500

Komatsu WA320-6, ’08, 3961 hrs ........$126,500

EXCAVATORS

MOTOR GRADERS

SKID STEER LOADERS

Komatsu PC35MR-2, ‘08, 301 hrs ..........$49,500 Komatsu PC138USLC-8, ’09, 2134 hrs..$109,500 Komatsu PC150LC-6, ‘98, 9246 hrs ........$39,500 Komatsu PC200LC-7, ‘05, 4000 hrs ........$92,500 Komatsu PC200LC-7, ‘02, 3044 hrs ........$97,500 Komatsu PC200LC-8, ’08, 4,293 hrs ....$102,500 Komatsu PC228USLC-3, ‘01, 6917 hrs....$84,500 Komatsu PC300LC-7EO, ‘06, 3004 hrs..$159,500 Komatsu PC300LC-7EO, ‘07, 1230 hrs..$189,500 Deere 270LC, ‘98, 8210 hrs ....................$43,500

LeeBoy 685B, ‘07, 45 hrs ........................$93,500

Mustang MTL16, ’05, 2349 hrs ..............$19,500

DOZERS Dresser TD15C, ‘88..................................$17,500 Komatsu D39PX-21, ‘04, 1851 hrs ..........$58,500 Komatsu D39PX-21, ‘06, 622 hrs ............$84,500 Komatsu D41E-6, ‘04, 1157 hrs ..............$64,500 Komatsu D61EX-15, ‘06, 2091 hrs ........$144,500 Komatsu D65EX-15, ‘05, 4780 hrs ........$129,500 Komatsu D65PX-12, ‘96, 4969 hrs ..........$52,500 Komatsu D85E-12, ’78 ............................$24,500

ARTICULATED TRUCKS Komatsu CD60R-1A, ‘99, 2597 hrs..........$59,500

HAUL TRUCKS

FORESTRY

(4) Komatsu HD465-5’s, ‘00, 32000 hrs ..$120,000 ea Deere 490E/Fabtek Head, ‘94..................$39,000 Fecon FTX130-FM, ’06, 875 hrs ..............$86,500 Franklin 132, ’77......................................$16,000 Franklin 632, ’99......................................$30,000 Franklin 3000/Stroke Head, ’92 ..............$12,000 Iron Mule 5500 ........................................$20,000 Timbco 415D/Fabtek, ‘01 ......................$110,000 Timbco 425D, ’99, (NO Attachment)........$22,000 Timberjack 608/Waratah, ‘98 ......................$49,000 Timberjack 1270D, ‘03 ..............................$175,000 Valmet 415EX/Rolly II, ’06 ....................$205,000 Valmet 415EX/Rolly II, ’06 ....................$245,000 Valmet 840.2/6, ’07 ..............................$190,000

TRACK LOADERS CAT 953C, ’99, 5912 hrs ..........................$52,500 CAT 963C, ’01, 4800 hrs ..........................$77,500

COMPACTION, MILLING & PAVING Blaw Knox PF115, ’87, 6748 hrs ............$12,500 CAT 815, ’79, 3916 hrs ............................$42,500 Hyster Roller C747B, ‘01, 3497 hrs ........$14,500 Interstate Distributor, ’03, 1000 Gal ........$21,500 IR DD90HF, ’99, 5306 hrs ........................$34,500 IR SD105DX Roller, ‘03, 1487 hrs ..........$54,500 IR SP48 Compactor, ’86, 4087 hrs ..........$18,500 LeeBoy 8500HD, ‘06, 2721 hrs................$43,500 LeeBoy 8500HD, ‘08, 2259 hrs................$47,500 LeeBoy 8500LD, ’00, 1535 hrs ................$29,500 LeeBoy 8500LD, ’04, 2,334 hrs ..............$22,500 LeeBoy 8500LD, ‘04, 2739 hrs ................$26,500 LeeBoy 8500LD, ’04, 1823 hrs ................$33,200 LeeBoy 8500LD, ’06, 1212 hrs ................$32,500 LeeBoy 8510LD, ’06, 306 hrs ..................$79,500 Rosco TRUPAC915, ‘05, 481 hrs ............$39,500 Wirtgen W600DC, ’03, 2800 hrs ................$CALL

WHEEL LOADERS Dresser 510C, ‘93, 2766 hrs....................$13,500 Dresser 532, ‘93, 7723 hrs......................$52,500 Komatsu WA200-5, ‘07, 2528 hrs ..........$93,500 Komatsu WA320-5L, ‘07, 3733 hrs ......$116,500 Komatsu WA320-6, ’08, 3961 hrs ........$126,500 Komatsu WA380-5L, ‘04, 6957 hrs ......$106,500 Komatsu WA380-5, ‘06, 4965 hrs ........$132,500 Komatsu WA450-1, ‘86, 10930 hrs ........$27,500 Komatsu D61EX-15, ‘06, 2091 hrs ........$144,500 Komatsu WA450-1, ‘88, 11933 hrs ........$27,500

Komatsu PC300LC-7EO, ’06, 3004 hrs..$159,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

V I S I T R O L A N D M A C H I N E R Y . C O M

Page 6 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke

Mustang 2050 Skid Loader, 49 HP, T-Bar Steer, Comes with Steel Tracks, I/D: 0019142309, 2210 Hrs, $12,995

(630) 739-7770 Bolingbrook, IL

7 Chicago Area Locations Contact us at Used@McCannOnline.com McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

ME3503 Mustang, 7500# Excavator, Open Canopy, 20” Pin on Bucket, New Rubber Tracks, I/D: D01075, 1225 Hrs, $22,995

Gehl DL6, 6000# Lift, 42’ Boom, Open Canopy, Outriggers, I/D: 320796, 2770 Hrs, $35,950

2004 Takeuchi TL140, s/n 21402072, 2999 Hours, Cab w/Heat & AC, Faster Hyd Couplers, 76" Tooth Bkt, Tak Controls, Rubber Tracks .... ..............................$24,000

2003 Yanmar VI050-2, s/n 21151B, 2,252 Hours; Cab w/Heat Aux Hyd, Rubber Tracks, Thumb, Hyd Coupler, 12", 16", 24" and 36" ditching buckets, Frost Tooth .......... ..............................$37,500

Mustang MTL25 Track Loader, 110 HP, Open ROPS, I/D: 503944 1069 Hrs, $34,500

RS5-19 Gehl, 5500# Lift, 19’ Boom, Open Canopy, Aux. Hyd, I/D: 550239, 762 Hrs, $40,500

Somero CopperHead XD 1.0, Laser Screed, I/D: 2040601183, 668 Hrs, $25,995

★ CONSTRUCTION

EQUIPMENT & SUPPLIES SINCE 1968

STAR EQUIPMENT LT D .

Call Sales 515-283-2215 • 800-352-5401 1401 2nd Ave • Des Moines, IA 50314 www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo

2006 Case CX50, s/n N6TN81532, 670 Hours; Cab w/Heat & AC, Traval Alarm, Rubber Tracks, Pattern Changer,Blade,Rubber Tracks ................................$40,000

3T Choos o e From !

2006 Case CX160, s/n DAC162429, 1,985 Hours; 16' 11" Boom, 10' 2" Arm, Shoes 3-Bar steel 24", Control Pattern Selector Valve, Coupler ......$79,000

2006 Case CX210, s/n DAC212459, 1433 Hours, 18' 8" Boom, 9'10" Arm, Control Pattern Selector, Kent Coupler ......$116,000

View our complete Used & “Like New” inventory at

McCannOnline.com

CALL DOUG OR DAVE (866) 485-7180 WWW.RBUSED.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 7

2008 CAT TL1055 ..................................$86,000

2008 CAT D3K LGP ..............................$87,500

1992 CAT 950F ......................................$49,000

1994 CAT D4HXL ..................................$28,500

S/N TBM00964, 605 hrs, Erops, heat, A/C, hydraulic coupler

S/N LLL00399, 382 hrs, Erops, drawbar, 25" track, std hyd, u/c good.

S/N 4DJ00955, 9542 hrs, 4 CYD bucket, tires at 90%, counterweight

S/N 8PJ00616, 9847 hrs, Orops, 90% undercarriage remaining, V PAT BLADE

1995 CAT CB214C ................................$13,500

1996 Cat 160H ......................................$99,500

2002 CAT M318 ....................................$57,000

2000 Cat 980G ....................................$135,000

S/N 9XK00201, 888 hrs, 39" roller, rops, working lights

S/N 9EJ00369, 9441 hrs, A/C, 14’ blade, front v-type scarifier

S/N 8AL03298, 7788 hrs, Erops, 47" HD CF bucket, A/C, heavy lift

S/N 2KR03995, 15,866 hrs, Erops, 7 YD bucket, tires good to fair

2004 CAT 950G ....................................$104,000

2005 CAT 247B ......................................$21,000

1998 Cat D6RLGP..................................$75,000

2007 CAT 297C ......................................$41,500

S/N AXX00648, 6471 hrs, A/C, air suspension seat, ride control, bucket

S/N MTL01299, 2,274 Hrs, EROPS, Aux. Hyd., Good U/C

S/N 9PN00987, 9119 hrs, Orops, Good U/C – turned, S blade, no leaks

S/N GCP00402, 724 hrs, Orops, hyd quick coupler, std flow hyd, bucket

2008 Cat 246C........................................$27,000

2005 CAT 140H ....................................$159,000

2005 Cat D6N LGP ..............................$136,500

2003 CAT 627G ....................................$360,000

S/N JAY02319, 1133 hrs, Erops, A/C, manual quick coupler, 72” GP-bucket, tires good

S/N APM02361, 3643 hrs, 14' blade, tires good, working lights.

S/N ALY01376, 3654 hrs, Erops, P.A.T. blade, U/C good, working lights

S/N CEX00284, 3972 hrs, Erops, A/C, push pull, 33.25 x 29 tires

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.

Page 8 â&#x20AC;¢ May 28, 2011 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

Gary Carlson Equipment: Your trusted local source for slide rails and trench boxes now stocks a complete line

352 7(& 6KLHOGLQJ 6KRULQJ DQG 6OLGH 5DLO 6\VWHPV 85$ %$6( $1' ' $/7851$ *URXQG 3URWHFWLRQ 0DWV

*HQHUDWRUV DQG /LJKW 7RZHUV

of construction equipment and supplies.

&RPSDFWLRQ Equipment

$LU &RPSUHVVRUV DQG 3QHXPDWLF 7RROV

HOOSRLQW 6XEPHUVLEOH : DQG +\GUDÃ¿ RZ 3XPSV

And you thought we just did trench boxes

0LQL ([FDYDWRUV DQG 6NLG 6WHHUV

Gary Carlson Equipment Co. 5HQWDOV s 6DOHV s 6HUYLFH s 'HOLYHU\ 0DQNDWR 6W s %ODLQH 01 s

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . .$100,000 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . .$66,000 COMPACTORS IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive $52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS $49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . .$205,000 Cat 825B, 1975, cab, S-blade, 50% front, 20% rear tires, good runner, can go to work .$52,500 Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%, front 60%, good condition . . . . . . . .CALL Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . .$4,000 - $6,500 (2) Champion Superpac A421 . . . . . . . .$11,500 LANDSCAPING Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . . . . . . . . . . .$13,000 Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles$9,500

CRAWLER LOADERS Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000 OFF ROAD HAULERS Komatsu CD60R-1 Crawler Dump Truck, 1997, 360° rotation . . . . . . . . . . . . . . . . . . . . .$66,000 Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS Cat D4H Series II, 1990, OROPS, 6 way blades, 18" pads, draw bar, 100% Cat U/C . . . .$57,000 Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000 (2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, winches, v. good . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1988, EROPS, rear ctwts, S-U blade .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79,500 Cat D8N, 1991, ROPS, drawbar, S-U blade . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000 (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. CRANES Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 section boom 8' jib . . . . . . . . . . . . . . . . .$14,500

MOTOR SCRAPERS Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . .CALL Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

AIR COMPRESSORS IR 185’s, JD diesels . . . . . . . . . . . . . . . . . .CALL

SPECIALS

Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . .. HYDRAULIC EXCAVATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick IAmerican Augers 16" Boring Machine, 10 HP coupler, 6-7000 hrs, Fleet maintained . .$39,000 gas, 35,000# thrust, 30' track . . . . . . . . .$7,500 Hitachi UH181, 1985, Equipped w/hammer . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 BACKHOES Gradall-Hopto 300, 1968, G.M. diesel UP, on Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, rubber, operational . . . . . . . . . .$10,500/OFFER GP Bkt, Extendahoe . . . . . . . . . . . . . . .$36,000 Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 Case 580L Rubber Tire Loader Backhoe, 1997, roller U/C . . . . . . . . . . . . . . . . . . . . . . . $31,500 OROPS, std stick, 24" bkt . . . . . . . . . . .$24,500 Cat 313B-CR, 2001, zero tailswing, A/C & Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, AM/FM, JRB quick coupler . . . . . . . . . .$93,000 24" Bkt, Like New . . . . . . . . . . . . . . . . .$59,500 Kobelco SK200LC Extra Long Reach, 1993, 32" TBG pads, 42' reach, nice . . . . . . . . . . .$68,500 CRUSHING & CONVEYING Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, Viper 301 Portable Screening Plant, 1997, dsl, long stick . . . . . . . . . . . . . . . . . . . . . . . .$39,500 5'x7'. side & rear conveyors, T/A carrier . .CALL Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 DRILLS Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, John Henry Drill Mtd on Cat 320N, 1994, 24' 27.6" TBG pads, work ready . . . . . . . . .$57,000 mast, Duraquip dust collection . . . . . .$150,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . .CALL MISCELLANEOUS Komatsu PC750 LC-6, 1999, 454 hp, 27” boom, 11’10” stick, 44’ DGB, aux plumbing, bucket (2) Balderson Broom Attachment for Cat IT choice, 24k ctwt . . . . . . . . . . . . . . . . . .$255,000 Machines, 8' wide, good condition . .$4,000 Ea. Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB ATTACHMENTS coupler, 31.5” TBG, ctwt removal, choice of bkt .. BUCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77,500 PC1000, 84" Digging Bucket . . . . . . . . . .$9,500 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” TBG, Over 100 Excavator, Loader, Specialized & ctwt removal, choice of bkts, working everyday .. Grapple Buckets in Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97,500 -Call For Your Needs Komatsu PC160 LC-7KA, 2004, 24” TBG pads, FORKS JRB coupler, plumbed, 8’6” width, nice, work ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL (8) IT28F/G Forks, Balderson qc, 48"-60" pallet Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ style, excellent . . . . . . . . . . . . . . . . . . . . .$4,000 stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear (5) Cat 936/926/950 pallet forks, for a Balderson plumbing very good condition . . . . . . .$205,000 quick coupler, exc. cond. . . . . . . . . . .$3,500 Ea. Others Available Call TRUCKS & TRAILERS Prices Are Negotiable - At Your Inspection (2) 48' Box Vans w/Liftgates, Good Condition . .. All Equipment is Owned & Operated By . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(L-R): Paul Fabrizius, Denny Bennett and Rolf Helland, all of Illinois Truck & Equipment, welcome Charlie Ragain and Matt Quigley, both of Diamond Unlimited, to the display of Illinois Truck & Equipment.

(L-R): Tom Land of Airy’s, Tom Stern of West Side Tractor Sales Co., Jim Welling of Airy’s, and Wayne Massad and Mark Gronkiewicz, both of West Side Tractor Sales Co., take a look at the indoor display for West Side Tractor Sales Co.

CAWGC Holds 2nd Annual Meet & Greet Expo in Joliet

he Contractors Association of Will & Grundy Counties held its second annual Meet and Greet Expo May 5 at the Stone City VFW in Joliet. More than 150 people attended the event that featured indoor and outdoor displays from 23 exhibitors. Bob Baish and his cooking crew prepared shrimp, beef and chicken kabob’s on the grill for attendees throughout the day. Illinois Truck & Equipment and Rod Baker Ford both contributed items and services for a raffle.

(L-R): Dan Saxen, commercial truck sales of Rod Baker Ford; John Russ of J. Russ & Co.; Rick Baker, president of Rod Baker Ford; and Christina Baker of Rod Baker Ford, gather for a photo-op in front of a Ford F550 Super Duty truck.

(L-R): John Young of Seasons Landscaping registers for the second annual “meet and greet” with the help of Mary Ellis Metz and Theresa Baker, both of the Contractors Association of Will & Grundy Counties.

(L-R): McCann Industries’s Sales Representative Steve Costello and Andy Walsh of LaFarge and John Stipanovich of Stip Bros. Excavating Inc. get a chance to catch up during the event.

Looking over a Kawasaki 70 TMV from Illinois Truck & Equipment are Mike Boyda (L) and Mark Messaglia of Vulcan Materials.

Joliet Township Road Commissioner Jim Maffeo, Bill Grenchik of Hamilton Engineering and Mike Varman of Stip Bros. Excavating Inc. take a look at this Kobelco 50SR excavator.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 11

View us at: www.amstate.com

EXCAVATORS GROVE RT875E

MANITOWOC 777

GRADALL XL4100 - ‘01 • truck mtd excavator with 4300 hours and 2 buckets ............................................................................................................$47,500

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: PAVERS / ROAD WIDENERS CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V, approx 1360 hrs ............................................................................................$201,500

CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES TEREX PR165 - ‘09 • 4 wheel, front loading, w/24” cutter, 260 hrs ..$199,000 WIRTGEN W50DC - ‘05 • 3 wheel, rear loading, new conveyor, 255 hrs .......... ..........................................................................................................$116,300

ROLLERS SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 200 hrs ..................$13,500 SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib w/ 36 hrs ........................$28,000 SAKAI SW652 - ‘10 • 58” Vib, remaining std warranty and EPTW, 125 hrs ...... ............................................................................................................$79,500 SAKAI SW880 - ‘09 • 79” Vib, remaining std warranty and EPTW, 940 hrs ...... ............................................................................................................$93,500 SAKAI SW880 - ‘10 • 79” Vib, remaining std warranty and EPTW, 600 hrs ...... ..........................................................................................................$108,500 SAKAI SW800II - ‘09 • 67” Dbl Drm Vib, w/balance of EPTW, 595 hrs$79,500 SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 400 hrs......................................................................................$94,500

Contact Marty in Illinois 1-800-307-0221 mahrendt@amstate.com

Photos & Detail Descriptions view: www.amstate.com

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • KAWASAKI WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT SIMPLICITY portable dual screen plant, 6x16 and 6x20 triple deck horizontal screens, 60" underscreen conveyors, 42" cross conveyors, tri-axle chassis with hydraulic leveling ................................................CALL CEDARAPIDS 4136 Portable twin roll plant, with Allis 5'x16' single deck horizontal screen, Cummins V-12 diesel, on tandem axle chassis with hydraulic leveling......................................$68,000 ALLIS H400-SD portable cone plant, Cummins diesel, rear feed conveyor, side discharge conveyor, tandem axle chassis with run-on hydraulic jacks ......................................................................CALL WHEEL LOADERS KAWASAKI 115Z-V, wheel loader (2004), 480 hp Cummins QSK-19 diesel, 4/3 speed Powershift transmission, 35/65-33 (L-5) tires, 8.3 cu. yd. spade nose bucket with teeth & segments, enclosed ROPS with heat/AC..................$189,500 KAWASAKI 90Z-V, wheel loader (2004), 6800 hrs, Cummins QSM11 diesel, 4 speed Powershift transmission, 5 1/2 cu. yd. bucket, 26.5R25 Michelin XHA tires, ride control, air conditioner ..........CALL KAWASAKI 95Z-V, wheel loader (2006), 340 hp Cummins QS15 diesel, 4/3 speed Powershift transmission, 29.5x25 Bridgestone L3 radials, 7 cu. yd. GP bucket, enclosed ROPS with a/c ......$249,500 Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

CRANES MANITOWOC 11000 100 TON CAPACITY CRAWLER CRANE, 2008, with 200’ Main Boom, 60’ Jib, Counterweight & Side Frame Removal Systems, 74,970 lb. Counterweight, 2050 Hours .. ......................................................................CALL GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ PowerPinned Boom, 32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ..........Reduced to $179,900 GROVE RT760E 60 TON CAPACITY ROUGH TERRAIN CRANE, 2008, (Several Available) with Cummins Diesels, 36’ to 110’ Booms, 33’ to 56’ Offsettable Bi-Fold Swingaway Extensions, Model HO30 Main & Auxiliary Hoists, 29.5x25 Tires, block & ball ..................................................CALL GROVE RT875E 75 TON ROUGH TERRAIN CRANE, 2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway, Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3-position outriggers (two cranes available) ......................................................................CALL MANITOWOC 777 200 TON CRAWLER CRANE, 2000 model, 220' main boom, 40' fixed jib, hoists with free-fall option, 48" track shoes, Series II counterweight, self-assembly package, Cummins diesel, third drum, 7000 hours, job ready ....CALL

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 12 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

See our New

“LOW PRO”

Tank Design

With Staggered Surge Supression Baffling

Artic Truck • Tank Sizes - 5,000, 6,500 & 8,000 Gallons • Berkley 4x3 650 GPM Pump • (5) 3” Spray Heads • Remote Water Cannon (Air) • Reelcraft Reel with Hose

• Hydraulic Diverter Block • Tankvision Digital Water Level Indicator • Epoxy Coating on inside of Tank • Primed, Painted and Decaled • Large Selection of Options

Go to our website to see full details.

www.dolphintanker.com Rigid Truck

Powerful. Reliable. Kubota. Clean Running Diesel Engines from 5.6 to 99 HP for OEM, Irrigation, Replacement and Industrial Power Applications

• Tank Sizes - 8,000, 9,000, 12,000, 16,000 & 20,000 Gallons • Berkley 5x4 1,500 GPM Pump • (6) 3” Spray Heads • Remote Water Cannon (Air) • Reelcraft Reel with Hose

• Hydraulic Diverter Block • Tankvision Digital Water Level Indicator • Epoxy Coating on inside of Tank • Primed, Painted and Decaled • Large Selection of Options

Dolphin Tanker Systems, Inc. 2550 US Hwy 92 E. • Plant City, FL 33566 (813) 704-4849 • Fax: (813) 704-4851

Your complete source of engine and generator power

314-868-8620 U www.ckpower.com

In St. Louis, ask for John Costello U In Illinois, ask for Dan Fichter In Missouri & Kansas, ask for Bob Balsat

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 13

USED EQUIPMENT 2005 CAT 938GII

1996 BLAW KNOX PF5510

2007 CAT D7R LGP

2006 CAT 315CL

s/n RTB01499, 3947 Hrs, Cab, A/C, 3.25 Yd GP Bkt, Ride Control, 20.5R25 Tires.... ......................................................$104,300

s/n 55101204, 7325 Hrs, OMNI III Screed, Grade & Slope Controls, Push Rollers, Good U/C ........................................$55,000

s/n ABJ01552, 3570 Hrs, Cab, A/C, Sweeps, Winch ............................$331,500

s/n CJC03875, 2666 Hrs, Cab, A/C, 10’2” Stick, Pattern Changer, Coupler ..$72,000

2005 CAT 385C

2006 CHALLENGER MTS865

2005 CAT D6R

s/n EDA00220, 4159 Hrs, GP Boom, 14’5” Stick, CWT Removal Devise, 84” Bkt HB Linkage ........................................$566,000

s/n BDS61315, 3942 Hrs, Deluxe Cab, 30” Belts, Hydraulic Trailer Brakes, Towed Scraper Arrangement ..................$189,000

s/n BDS61320, 2656 Hrs, Deluxe Cab, 30” Belts, Hydraulic Trailer Brakes, Towed Scraper Arrangement ..................$189,000

s/n AFM00164, 5287 Hrs, Cab, A/C, SU Blade ............................................$135,000

2008 CAT 815F II

1994 CAT 5130

2003 CAT 740

2006 CAT 420E

s/n BYN00460, 941 Hrs, Cab, A/C, Blade .. ......................................................$319,500

Front Shovel, Idled 2009, Component Rebuild History Available............$325,000

s/n ASM00988, 6018 Hrs, A/C, Retarder, Tailgate, 29.5 Tires, Approx 50% $249,000

s/n HLS01467, 3230 Hrs, Cab, A/C, AWD, E-Stick, Ride Control, Coupler......$54,500

2004 TEREX TR70

2007 CAT D5G XL

2006 CAT 365CL

2005 CAT D6R XW

18,000 Hrs, Body Liners, Auto Lube, 24:00-35 Tires, Approx 50% ........$120,000

s/n WGB03871, 1461 Hrs, OROPS, Heater, Lights ..............................................$64,500

s/n MCS00295, 5502 Hrs, Mass EX GP Boom, 9’1” Stick, 84” Bkt, CWT Removal Device ..........................................$305,000

s/n AEP00590, 10,700 Hrs, Cab, A/C, CWT, SU Blade, NEW U/C......................$110,000

Rod Byers 636-680-1579 rod.byers@fabickcat.com

1 Fabick Drive, Fenton, MO 63026 www.fabickcat.com “To Ever Serve Our Customers Better”

Dave Modglin 636-680-1588 dave.modglin@fabickcat.com

Page 14 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Request your on-site demonstration today! Call now 708 758-2062

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 15

RENT

THE TOTAL PACKAGE. NORTRAX SERVICE. JOHN DEERE DEPENDABILITY.

When renting equipment, there’s no better place to go than Nortrax. We have the late model, low hour equipment you need with service and support like no other. Call your Nortrax representative today. Nobody digs deeper or tries harder to keep you productive and profitable, every day.

www.nortrax.com

Ashland, WI 715.682.5522

Monico, WI 715.487.5583

Duluth, MN 218.722.7456

Grand Rapids, MN 218.326.9427

Chippewa Falls, WI 715.834.2924

Wausau, WI 715.848.0957

Bemidji, MN 218.759.1996

Escanaba, MI 906.789.9054

Page 16 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Seminars, Expo Highlight Successful 43rd Annual IAAP Convention Bob Byrne (L) of Howell Tractor and Equipment Co. and David Clement of Vulcan Material Co. take a break from the proceedings to catch up.

Tom Thelen (third from L) of Thelen Sand & Gravel Inc. stops by the West Side Tractor Sales Co. booth to see (L-R) Ron Svartoien, Kelly Barr and Brian Benck, all of West Side Tractor Sales Co.

he Illinois Association of Aggregate Producers held its 43rd annual convention May 3 at the Crowne Plaza in Springfield. The all-day event was filled with informative seminars and the expo gave members a chance to net- (L-R): Tim Nelson and John Parent take some time out work. to answer questions from Kelly O’Brien of Hanson see CONVENTION page 52

Material Service.

(L-R): Randi Wille of Meyer Material Co., Glenda Schoening of IAAP and Brian Rice of Hanson Material Service welcome attendees to the 2011 convention.

Discussing the state of the industry are Floyd Horton (L) of Horton Supply and Larry Goessling of Shakespeare Aggregates Inc.

Dawson Horn (L) of Process Machinery Inc. and Scott Jinks of Delta/Southern Illinois Companies take a break from the convention to pose for a quick photo.

Enjoying the convention (L-R) are Everett and Floie Lawrence of Lawrence Gravel Inc. and Ron Koehler of Nokomis Quarry Inc.

(L-R): Vince Brown of the Illinois Cement Co. pays Terry Macklin and Don Gregorius a visit at the American State Equipment Co. booth.

Meade Electrical Co.’s Larry Geraghty (L) and Rich Quellette are ready to speak with attendees at the company’s booth.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ May 28, 2011 â&#x20AC;¢ Page 17

ITâ&#x20AC;&#x2122;S

RAINING YELLOW

IRON.

ONE DEALER. T TOTAL OTAL CAP CAPABILITIES. PABILITIES ABILITI ABILITIES. INNO INNOVATIVE VATIVE S SOLUTIONS SOLUTIONS..

Bill Begemann

816-753-5300 x5368 Bill.Begemann@deancat.com

Jason Cole

816-753-5300 x5476 Jason.Cole@deancat.com

+!.3!3 #)49 p 3%$!,)! p #(),,)#/4(% p 34 */3%0( p /,!4(% + !.3!3 #)49 p 3%$!,)! p #(),,)#/4(% p 34 */3%0( p /,!4(%

Page 18 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TITAN MACHINERY

Tit Threan Trip l Schat Evene edu t le

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 28, 2011 â&#x20AC;˘ Page 19

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â?ČąČŚČą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą

2001 Komatsu PC138US-2, #80854, Blade, Aux Hyd, 8â&#x20AC;&#x2122; Arm, 4700 Hrs ..................$69,500

2006 Komatsu PC270LC-8LF, #81217, 60â&#x20AC;&#x2122; Long Reach, 33.5â&#x20AC;? Shoes, New Paint, 4500 Hrs ............................................................$156,000

2004 Komatsu D65EX-15, #80847, Cab/AC, 26â&#x20AC;? Shoes, Ripper, 4700 hrs ..............$159,500

2000 Bomag BW177DH-3, #81208, OROPS, Single-Smooth Drum, 1950 Hrs............$39,500

3-to-Choose!! Bomag BC1172RB Landfill Compactor, Cab/AC, Straight Blade, 7200+ hrs.. ........................................................Call Today!

2006 Komatsu PC400LC-7EO, #81398, 13â&#x20AC;&#x2122; Arm, 35.5â&#x20AC;? Tracks, HKX Kit, JRB QC, PSM Thumb, 4700 Hrs ................................$189,500

2007 Komatsu D41E-6, #91419, Cab/AC, 6-Way Blade, 20â&#x20AC;? Shoes, 2025 Hrs ......$84,500

1998 Komatsu PC300LC-6LC, #91161, Aux Hyd, QC, 8950 Hrs ..........................................$82,500

2004 Komatsu HM400-1, #80617, Tailgate, 6900 Hrs................................................$189,400

2003 Komatsu WA450-5, #81365, Cab/AC, GP Bkt w/BOE, 8700 Hrs ..........................$114,500

2005 Komatsu WA200-5, #81316, Cab/AC, JRB QC/Bkt, LSD Axles, 4550 Hrs ................$99,500

2005 Komatsu D65EX-15, #80659, Cab/AC, Drawbar, 3750 hrs ..............................$149,500

Page 20 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Equipment Guide Special Pricing... Say You Saw it in CEG!

Now Serving You with 13 Locations including Ohio.

www.ruddequipment.com Albert Medcalf Office: (502) 456-4050 • Cell: (502) 592-6510

EH1700 2 Available, 20000 hours, Call for details

Euclid R170’s Completely Rebuilt 2 Available Call for details

2009 Hitachi EX1200BE-6 s/n 18JQ001089, 4460 hours equipped with a 94” Esco bucket, Call for details

Volvo A40 Truck 1998 and 2000 Model Available, Call for details

Takeuchi-US Names New Dealership in Midwest Region Wakarusa Heavy Equipment has recently joined the team of dealerships promoting the Takeuchi line of compact earthmoving equipment. Wakarusa Heavy Equipment, located in Wakarusa, Ind., is staffed by professionals with extensive backgrounds in the industry and boast years of experience with both light and heavy construction equipment. Led by President Timothy Martin and an aggressive management team, Wakarusa focuses its dealership model on providing its customers with specialized product support at every level. The success of its dealership is derived from strong customer retention by offering quality solutions with new and used equipment, an expansive rental fleet and after market support. “With the addition of dealers like Wakarusa Heavy Equipment, we continue to offer comprehensive, service-orientated dealers who share our commitment as partners to our customers,” said John Vranches, Takeuchi national sales manager. “Wakarusa’s unsurpassed knowledge of the local market and their proven ability to exceed customer expectations will position both companies and customers alike for success.” For more information. call 706/693-3600 or visit www.takeuchi-us.com.

‘Dirty Jobs’ Star Touts Manufacturing Jobs to Senate Committee JOBS from page 1

2005 John Deere 450CLC s/n 91747, 6100 hours, Call for details

Volvo L330E 4 Available, 2005 and 2006 model, Call for details

1993 Cat 988F s/n 8YG00369, 25000 hours, Call for details

2000 Komatsu WA250PT-3 s/n A78003, 5700 hours, Call for details

Rowe described his experiences working with manufacturers and skilled laborers across America, his personal initiatives in support of jobs creation and the importance of paved roads and reliable bridges. In his written testimony, Rowe said, “I am ready, able and eager to partner with the federal government to help reconnect our country to the importance of manufacturing and skilled labor.” In addition, he demonstrated his support of the I Make America campaign stating he was proud to join forces with AEM “...for the launch of I Make America, a national grassroots campaign to promote U.S. manufacturing jobs through infrastructure investment and the passage of export agreements.” “We are fortunate and proud to partner with Mike on the I Make America campaign, and in his support of U.S. manufacturing policies that help create American jobs,” said AEM President Dennis Slater. “AEM and I Make America commend Senators Rockefeller and Hutchison for holding this hearing and for their ongoing commitment to support policies that promote infrastructure investment and job creation in the manufacturing sector across the U.S.,” he added. For more information, visit www.IMakeAmerica.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 21

NEW M SERIES IN STOCK! Authorized Bobcat® Dealer

Bobcat Limited Edition Utility Vehicle, In Stock Now, Call for Pricing

New Bobcat S130, Call for Pricing Bobcat Forestry Cutter on T320, for Rent NEW E60, E35 & E32 Excavators In stock now! Call for pricing and details

Bobcat 417 Versahandler Call for Price

Bobcat Tractors In Stock Now New Bobcat S850, Call for Pricing

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 www.farmriteequip.com U.S. Hwy 12 W Dassel, MN 55325

320/275-2737 • Toll Free 888/679-4857

Page 22 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan Portable Power

2008 IR P185WIR, 58 hours..................................$11,035

2010 IR P250WJD, 158 hours ................................$18,735

2010 IR HP450WIR, 109 hours ..............................$38,940

2010 IR VHP400, 139 hours ..................................$41,050

2011 IR HP750WCU, New ......................................$70,800

2011 IR G145LRG, New ........................................$48,125

2011 IR G240, New ................................................$72,700

2008 IR TC13, New ................................................$18,000

VOLVO Construction Equipment & Services 12311 W Silver Springs Dr. Milwaukee, WI 53225 (414) 461-7810 john.devine@vcesvolvo.com

Congressman Hultgren Faceoff... Monroe Co. Group Removes Visits IED Member Meeting I-69 From Its Highway Plans

The Illinois Equipment Distributors welcomed Congressman Randy Hultgren to its April 20 membership meeting. Congressman for the 14th district, Hultgren beat incumbent Bill Foster in the 2010 election. Hultgren told IED members about his experience as freshman Congressman. On hand for Hultgren’s appearance (L-R) are Steve Nenn, associate director; Hugh Golding, executive director; Barry Heinrichs, vice president; Congressman Randy Hultgren; Steve Dillon, president; Bob Jones, director; Rick Dahl, second-year director; and Jim Cox, first-year director.

BLOOMINGTON, Ind. (AP) A Bloomington-area group has set up a possible showdown with the Indiana Department of Transportation after approving a local highway plan that does not include a section of the contentious $3 billion Interstate 69 extension from Indianapolis to Evansville. The policy committee of the Bloomington/Monroe County Metropolitan Planning Organization approved a new highway plan May 13 that left out a proposed section of the extension in Monroe County. Bloomington City Council member Andy Ruff, who sits on the policy committee, said Monroe County residents have unresolved questions on the road’s funding, the location of interchanges and how it will affect the environment. “There comes a time when you stand up to a bully. It is time to stand up for ourselves,” Ruff told The Herald-Times. The committee’s move surprised Sam Sarvis, INDOT’s deputy commissioner for major program management. He said the

agency “would take a serious look at all discretionary funding” within Monroe County. In 2009, the last time these two sides butted heads over conflicting highway plans, INDOT officials said as much as $32.4 million could be withheld from transportation projects in Monroe County. Local officials eventually assured INDOT they weren’t trying to block I-69’s construction, and the policy committee voted last year to include the I-69 project in its highway plan. Lawyers representing I-69 opponents sent policy committee members a 23-page letter arguing against including the extension in the local plan. Among other things, it said no source of guaranteed funding had been identified as required by federal law, suggesting the policy committee could leave itself legally vulnerable. Bloomington Mayor Mark Kruzan voted to exclude the extension May 13 after backing it a year ago. He cited the issues raised in the letter and a question over whether INDOT would withhold local funding.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 23

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2005 VOLVO EC210B LC, Stk #: UEF097; 3,817 Hrs; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Cntl Change $84,000

2001 VOLVO L330D, S/N: 61108; 11,000 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ..................Call

2004 VOLVO L60E, Stk #: UDA367; 5,259 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.2CY Bucket w/BOE ..................................$84,500

2007 VOLVO A40D, S/N: 13747; 3,210 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............ ..........................................$339,000

EXCAVATORS

1996 VOLVO A25C, S/N: 60795; 10,500 Hours; A/C, CONTRONICS, 23.5-25 TIRES .... ..........................................................$89,000 1996 VOLVO A25C, S/N: 60790; 10,500 Hours; A/C, CONTRONICS, 23.5-25 TIRES .... ..........................................................$89,000 1993 VOLVO A25C, S/N: 8072; 12,000 Hours; HEATER. 23R25 TIRES 10%, BODY HEAT, 6X6 ....................................................$59,000 2007 VOLVO A40D, S/N: 13874; 3,491 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............................................$339,000 2006 VOLVO A40D, S/N: 13033; 4,488 Hours ........................................................$279,000 2006 VOLVO A40D, S/N: 13152; 4,441 Hours ........................................................$279,000 2005 VOLVO A40D, S/N: 12171; 3,753 Hours; A/C, CONTRNICS, 29.5R25 TIRES, TAILGATE ........................................................$275,000 2005 VOLVO A40D, S/N: 70051; 6,311 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TAILGATE, BODY HEAT ..........................$259,000 2005 VOLVO A40D, S/N: 12173; 5,312 Hours; AC, CONTRONICS, 29.5R25 TIRES, TAILGATE ........................................................$259,000 2004 VOLVO A40D, S/N: 11341; 3,433 Hours; AC, CONTRONICS, 29.5-25 TIRES (90%), TAILGATE ........................................$285,000 2004 VOLVO A40D, S/N: 11223; 4,790 Hours; A/C, Contronics, 29.5R25 Tires ......$275,000 2004 VOLVO A40D, S/N: 11026; 4,254 Hours; A/C, CONTRNICS, 29.5R25 TIRES .................. ........................................................$269,000 2003 VOLVO A40D, S/N: 10772; 5,834 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$265,000

2003 VOLVO A40D, S/N: 10826; 7,321 Hours; A/C, CONTRNICS, 29.5R25 TIRES .................. ........................................................$199,000 2002 VOLVO A40D, S/N: 60169; 7,465 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$195,000 2002 VOLVO A40D, S/N: 60138; 8,291 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TAILGATE ................................................$185,000 2001 VOLVO A40D, S/N: 60060; 8,180 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$195,000 2001 VOLVO A40D, S/N: 60058; 8,236 Hours; A/C, CONTRNICS, 29.5R25 TIRES .................. ........................................................$169,000 2000 VOLVO A40D, S/N: 10090; 8,801 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$169,000

2005 VOLVO L70E, Stk #: UBG916; 2,320 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.5CY Bucket w/BOE .............. ..........................................................$99,000 2005 VOLVO L70E, Stk #: UDI638; 6,271 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.5CY Bucket w/BOE .............. ..........................................................$87,500 2004 VOLVO L70E, Stk #: UFI340; 9,961 Hours; Cab, A/C, Contronics, Hydraulic Attachment Bracket, Front Diff Lock, 2.9cy Bucket, 20.5R25 Tires ......................$73,500 2003 VOLVO L90E, Stk #: UBA183; 8,136 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 3.5CY Bucket w/BOE .............. ..........................................................$99,000 2005 VOLVO L110E, Stk #: UJJI424; 3,540 Hours; Cab, A/C, Hyd Attachment Bracket, 23.5R25 Tires, 4.1CY Bucket w/BOE$127,500 2010 VOLVO L110F, 447 Hours; Cab, A/C, Radio w/CD, Boom Susp, 3rd Function, Block Heater, 4.4cy Bucket, 23.5R25 Tires .............. ........................................................$212,500 2005 VOLVO L220E, Stk #: UBF297; 16,656 Hours; Cab, A/C, Radio, Return to Dig, Boom Susp, 7cy Bucket w/BOE, 29.5R25 Tires, Recent Transmission ......................$109,000 1999 VOLVO L330C, S/N: 60392; 22,268 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ........................................Call 1996 VOLVO L330C, S/N: 60125; 22,031 Hours; Cab, A/C, Contronics, Boom Susp, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires..........................................................Call 2001 VOLVO L330D, S/N: 61108; 11,000 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ........................................Call

2005 VOLVO EC210B LC, Stk #: UEF097; 3,817 Hours; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Control Change......................$84,000 2003 VOLVO EC210B LC, S/N: 843; 8,356 Hours; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Geith Pin Grabber, 48" Bucket ..........Call 2004 VOLVO EC360B LC, Stk #: UBF800; 4,702 Hours; A/C, 36" pds, 12'10" stck, Aux hyd, Q/C piping, Pilot pat cntrl ................Call 2003 VOLVO EC360B LC, Stk #: UJJ616; 5,509 Hours; 12' 10"' ARM; AC; RADIO; 36" PADS; 70% UC; 54" P/O BUCKET; PILOT PATTERN CONTROL CHANGE ........................Call 2003 VOLVO EC460B LC, Stk #: UJGF433; 3,472 Hours; A/C, Radio, 36" Pads, 15'9" Stick, Pilot Pattern Control Change, Aux Hyd, 66" Bucket........................................$179,500

GENERATOR SETS VOLVO 320 KW, S/N: 2012638315; 320 KW .. ................................................................Call 2006 VOLVO 500 KW, For Sale or Rent. Call Denny or Brek for price & details. Skid Unit .. ................................................................Call 2006 VOLVO 500 KW, S/N: 021732; 7,588 Hours; Volvo 500 kw in a trailer ..............Call 2005 VOLVO 500 KW, S/N: 021732; For Sale or Rent. Call Denny or Brek for price & details. Skid Unit ......................................Call

OFF HIGHWAY TRUCKS 2007 VOLVO A40D, S/N: 13747; 3,210 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............................................$339,000

WHEEL LOADERS

2004 VOLVO L60E, Stk #: UDA367; 5,259 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.2CY Bucket w/BOE .............. ..........................................................$84,500 2004 VOLVO L60E, Stk #: UDH430; 7,451 Hours; Cab, A/C, Hyd Attachment Bracket, New 20.5R25 Tires, 2.2CY Bucket w/BOE ...... ..........................................................$84,500 2002 VOLVO L70D, Stk #: UDG937; 1,907 Hours; Cab, Contronics, Boom Susp, Hyd Attachment Bracket, Limited Slip Diff, 2.5cy Bucket, 20.5-25 Tires ........................$89,500 2002 VOLVO L70D, Stk #: UFF989; 10,497 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5-25 Tires, 2.5CY Bucket w/BOE................ ..........................................................$67,500

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.

Page 24 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

International 350 Payhauler, 1:25 Scale ........ Grove GMK4115L Truck Crane, 1:50 Scale .... ..................................................................$260 ................................................................$225 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ............$70 Allis-Chalmers HD-41 Dozer, 1:25 Scale......................$185 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$65 Bantam C-35 Crawler Shovel, 1:50 Scale ......................$65 Bantam Truck Mounted Shovel or Backhoe; 1:50 Scale .... ..........................................................................................$90 Bobcat A300 Wheel Loader, 1:25 Scale ........................$25 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader ..............................................................................$40 Bobcat M-743 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat S175 Skid Steer Loader, 1:50 Scale..................$20 Bobcat S175 Skid Steer Loader, 1:25 Scale..................$40 Bobcat S185 Skid Steer Loader, 1:25 Scale ..................$30 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale..................................................................$60 Bobcat 325 Mini-Excavator, 1:25 Scale ........................$30 Bobcat 753 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$30 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$30 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$85 Caterpillar 4-Piece Earthmover Set, 1:64 Scale ............$85 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ............................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$45 Caterpillar D6T XW Track-Type Tractor ........................$65 Caterpillar D8R Track Type Tractor, 1:50 Scale ............$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$75 Caterpillar D11T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 24H Motor Grader, 1:50 Scale ......................$90 Caterpillar 140M Motor Grader, 1:50 Scale....................$70 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale .. ..........................................................................................$35

Bantam C-35 Shovel, 1:50 Scale ............$65

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ......$30 Caterpillar 297C Multi-Terrain Loader, 1:32 Scale ........$35 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ................$35 Caterpillar 323D L Excavator, 1:50 Scale ......................$50 Caterpillar 320D Excavator, 1:50 Scale..........................$65 Caterpillar 365B Excavator, 1:50 Scale..........................$65 Caterpillar 385C Excavator, 1:50 Scale..........................$60 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$45 Caterpillar 511OB Excavator, 1:50 Scale ......................$98 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $35 Caterpillar 725D Articulated Truck, 1:50 Scale ............$60 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$70 Caterpillar 785D Mining Truck, 1:50 Scale ..................$140 Caterpillar 836G Landfill Compactor, 1:50 Scale..........$50 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $40 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$45 Caterpillar 963D Track Loader, 1:50 Scale ....................$55 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$45 Caterpillar 977 Traxcavator, 1:50 Scale ........................$35 Caterpillar 988H Wheel Loader, 1:64 Scale ..................$30 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$70 Gradall XL4300II Excavator, 1:32 Scale ........................$75 Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$50 International TD-15 Dozer, 1:87 Scale............................$40

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu PC2000-8 Front Shovel, 1:50 Scale ................................................................$225

International TD-24 Ag/Crawler, 1:50 Scale ..................$40 International TD-24 Military Dozer, 1:50 Scale ..............$45 International TD-25 Dozer, 1:87 Scale............................$40 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$45 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$65 John Deere 200D LC Excavator, 1:50 Scale ..................$40 John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........$35 John Deere 400D Articulated Truck, 1:50 Scale ..........$40 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale....$30 John Deere 748H Log Skidder, 1:50 Scale ....................$45 John Deere 850J Crawler Dozer, 1:50 Scale ................$40 Komatsu 960E Mining Truck, 1:50 Scale ....................$250 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$60 Komatsu D51 EX Dozer, 1:50 Scale ..............................$60 Komatsu D51 PX Dozer, 1:50 Scale ..............................$60 Komatsu D375 Dozer, 1:50 Scale ..................................$85 Komatsu GD655 Motor Grader, 1:50 Scale....................$60 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$70 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$75 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$225 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40 LBX 210 X2 Excavator, 1:40 Scale ................................$70 Link-Belt 3200 All Terrain Crane, 1:50 Scale ..............$180 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ......$160 LeTourneau Super C Scraper w/Cab, 1:50 Scale..........$80 LeTourneau Military Super C Scraper, 1:50 Scale ........$50 Northwest 25-D Backhoe, 1:50 Scale ............................$90 Northwest 25-D Shovel, 1:50 Scale................................$90 Terex PPM AC40/2L ATC, 1:50 Scale............................$175 Terex RC45 RTC, 1:50 Scale ........................................$185 Terex Demag AC100/4 ATC, 1:50 Scale........................$180 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo SD-122 Soil Compactor, 1:72 Scale ....................$40 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$45 Volvo L90E Wheel Loader, 1:50 Scale ..........................$70

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 25

LEXINGTON, KY 2180 Old Frankfort Pike P.O. Box 11520 Lexington, KY 40510 859-254-6443 1-800-432-0913

CORBIN, KY 828 W. Cumberland Gap Pkwy. Corbin, KY 40701 606-528-0700 1-800-274-9457

PRESTONSBURG, KY 2124 Watergap Road Prestonsburg, KY 41653 606-874-8036 1-800-955-9457

Page 26 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Made in the USA

SAVE TIME SAVE LABOR

SAVE MONEY SAVE OIL

The FlangeLock Tool allows for the simple sealing of open SAE Code 61, 62 & 62 KAT-Style hydraulic flanges without tools. Constructed out of lightweight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness. • No Tools Required • No Expensive Hardware Needed • No more Rags stuffed into hoses • No more messy Plastic Caps • The Ultimate Contamination Control Tool

• One hand Installation • Eliminate Hydraulic Oil Spills & Clean up • Quick Installation & Ease of Usage • Industry Acclaimed • 100% Made in USA • Safe for Personnel & Environment

For more information contact Mike Pearl

914.980.8890 email: mike@flangelock.com www.flangelock.com

SEAL SAVER PROTECTIVE CYLINDER COVER Stop the never ending cycle of cylinder repairs and avoid costly equipment downtime with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER protects seals and cylinder rods from premature failure extending the life of your equipment by preventing the ingression of contaminants into the hydraulic system. This unique preventative maintenance tool attaches easily and securely to the rod and cylinder head—usually in fifteen minutes or less—with no disassembly of the cylinder required.

The SEAL SAVER* WILL: Eliminate rod scoring • Extend the life of cylinder seals • Protect cylinders from the elements • Prevent pitting due to chemical washes • Reduce particle contamination of hydraulic systems • Minimize dings and dents associated with falling debris *Patented

SEAL SAVER has proven effective in Recycling, Construction, Mining, Rock Quarries, Waste Management, Refineries and Wood Products industries.

Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 27

The difference is in the D-tails.

John Deere 320D John Deere 35D Looking for a small excavator that delivers big productivity to your worksite? You’ll find it in the John Deere 35D. Our most popular compact excavator is still small enough to get around the tight spots in a construction site, while its powerful breakout force and impressive digging depth quickly get jobs done. And with its standard quick-coupler, auxiliary hydraulics, and your choice of available attachments, the 35D brings the versatility to accomplish most any job. To find out how to make it big with a compact excavator, give us a call today.

You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quiet pressurized cabs with best-inclass visibility, and curved-glass swing-out doors. Plus optional easy-to-operate electrohydraulic joysticks. And with more than 100 available Worksite Pro™ attachments, you can offer your customers everything from breakers to snow blowers to whatever in just minutes. Packed full of best-inclass productivity and uptime-enhancing features, the D-Series are destined to become operator and owner favorites. Ask for a demo today.

Our Compact Track Loaders are packed with customer-recommended enhancements- larger, quieter operator stations with best-inclass visibility, and curved-glass swingout doors. These CTLs keep their cool with innovative cooling systems and optional hydraulically driven variablespeed fans that reverse to clear buildup. Job-proven steel-reinforced tracks provide superior traction, longevity, and breakout force.

John Deere 333D

**0.0% Financing for 42 Months. ** Offer ends 06/30/11. Some restrictions apply; other special rates and terms may be available, so see your dealer for details and other financing options. Subject to approved credit on John Deere Credit Installment Plan.

RDO Equipment Co. Burnsville, MN Matt Dull 952-890-8880 • mdull@rdoequipment.com

Scharber & Sons Rogers, MN Randy Thorstad 612-840-3464

Isanti County Equipment Isanti, MN Jesse Kraft 763-444-8873

www.mnequipmentsolutions.com

Page 28 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Road Upgrades Near Proposed Stadium Could Cost $131M

Phone: 502-493-4380 Fax: 502-499-3180 ron_weir@bramco.com

www.brandeismachinery.com

Used Equipment

UPGRADES from page 1

1998 Gehl SL4625SX Skid Steer, w/Canopy, GP Bucket, Aux Hyd, #BTF0010 ..$7,500 2007 Komatsu WA150-5 Wheel Loader, w/Cab & AC, Forks, #BTE0013 ........$64,000 2010 Komatsu D475AX-5EO Dozer, with EROPS, 45 yd. U-blade assy, rear counterweight, 4,400 hours #KACON1 ....................................................................$1,150,000 2010 Komatsu D475AX-5EO Dozer, with EROPS, 45 yd. U-blade assy, rear counterweight, 2,400 hours #KACON1....................................................................$1,300,000 2011 Komatsu D475AX-5EO Dozer, with EROPS, 45 yd. U-blade assy, rear counterweight, 1,800 hours #KACON3....................................................................$1,375,000

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

Please call or check out our Web site for our Certified Rental Fleet Reduction Sale! Mike Mundt: (904) 625-9259 MichaelMundt@fccef.com Sarah Spraggins: (904) 625-9274 SarahSpraggins@fccef.com Toll Free: (800) 207-9286

2009 Kobelco SK210LC-8, s/n: YQ09-U4086, Asset#: 79752, 1475 Hrs, Springfield, IL, $116,000

CHECK OUR ENTIRE INVENTORY AT: WWW.FCCEF.COM Jacksonville, FL CONTACT US TODAY FOR MORE INFO!

2002 Caterpillar 5110B-ME, s/n: AAA00348, Asset#: 86410, 15427 Hrs, Park City, KS, $284,000

1978 Caterpillar D8K Pipelayer, s/n: 77V11362, Asset#: 66585, 268 Hrs, Park City, KS, $203,800 2007 Vince Hagan LMP-12C-100, s/n: 70614, Asset#: 68564, Like New, Valley Springs, CA, $449,000

PLEASE SEE OUR CURRENT INVENTORY LIST AT WWW.FCCEF.COM!

mean the project would move forward at the Capitol. Bagley said team officials, lawmakers and others were brainstorming ways to raise the additional $131 million; he said both the team and Ramsey County wouldn’t go higher than their respective planned contributions of $407 million and $350 million. “What’s left is $131 million,” Bagley said. “We’re trying to find creative financing solutions that fit the governor’s criteria that the state not exceed $300 million.” In a letter to Vikings owners Zygi and Mark Wilf, Dayton, Lanning and Sen. Julie Rosen of Fairmont reaffirmed the state won’t spend more than $300 million — and that any road costs would fall under that cap. The Democratic governor and the two Republican lawmakers have maintained a united front in recent days in their dealings with the stadium issue. But at a press conference May 18 at the Capitol, two Republican senators who have been working on the state transportation budget criticized the governor on the issue. “They seem to be more focused on the Vikings stadium than they are on the budget,” said Sen. Ted Lillie, R-Lake Elmo. Dayton took issue with that charge. “It’s just ridiculous,” he said. “They’re the ones who couldn’t put a budget together.” The proposal from the Vikings and Ramsey County calls for a $1.1 billion, 65,000-seat stadium with a retractable roof at the site of a former Army ammunition plant in Arden Hills, about 10 mi. northeast of the team’s current home at the Metrodome in downtown Minneapolis. The team would kick in $407 million of that cost, Ramsey County would pay $350 million from a half-cent county sales tax increase, and the state would raise its $300 million from new statewide sales taxes on sports memorabilia, luxury seats and digital video recorders as well as naming rights, a Vikings-themed lotto game and an income-tax surcharge on NFL players. Despite the team’s alliance with Ramsey County commissioners, some in the county are criticizing the venture. On May 18, top Democratic and Republican party leaders in the county teamed up to call the stadium a bad deal for their county. In a joint statement, Ramsey County DFL Chairman Rod Halvorson and James Carson, the county GOP’s 4th Congressional District chairman urged party activists and citizens of Ramsey County to contact Dayton, state lawmakers from the county, and county commissioners to oppose what they called a “horrible agreement” between the team and members of the county board. “It is simply wrong to force a $350 million sales tax onto the people and businesses of Ramsey County, especially without a vote of the people,” the two wrote.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 29

Screen Soils

Pipeline Padding

Mix Compost

ALLU D-SERIES MODELS Screener Crushers & Fine Screening

• Over 70 models available to fit EVERY machine • High production even with wet muddy materials • 5/8” & 1” Screening size with replaceable hammers • Stronger outer shell for longer wear and less maintenance ALLU Group Inc. Info Call: 1-800-939-2558 | Email: usa@allu.net

Naperville, IL 630-3555 7150

SALES - RE ENT TAL - PARTS - SE ERVICE

Rockfford, IL 815-961-3160 South Holland, IL 708-331-6362 Wa auconda, IL 847-526-77 7700 Rockdale, IL 815-7300 9011

hatever the Work...W West Side Tractorr Sales

Page 30 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The new 45,000 sq. ft. Kansas City facility sits on 9.5 acres of land.

(L-R): Murphy Tractor Rental Assistant Kellie Swafford, Branch Manager Greg Knipp and John Deere Product Consultant Mike Boyle are ready to greet attendees at the grand opening.

Murphy Tractor & Equipment Hosts KC Grand Opening

More than 450 customers attended the grand opening event.

Manufacturer representatives get ready for the new Murphy Tractor & Equipment doors to open and the grand opening to begin.

The John Deere skid steer suggestion box included customer comments and requests the company made sure to act upon.

urphy Tractor & Equipment Co. Inc. held a grand opening event May 6 for its new facility in Kansas City, Mo. More than 450 customers enjoyed lunch and toured the new facility. The new 45,000 sq. ft. facility, located at 8600 NE Parvin Rd, one mile east of Interstate 435, sits on 9.5 acres and includes 11 service bays, large parts and sales departments, a spacious equipment yard and easy truck access. During the grand opening event, John Deere product consultants were on hand to show equipment features on new products to customers, who were able to try their hand at the John Deere operator training excavator and motorgrader simulators. The simulators are a cost-effective, safe, and efficient way to train new operators in a risk-free environment. Customers also had the opportunity to win valuable door prizes donated by manufacturers. For more information, call 816-483-5000 or visit www.murphytractor.com

Customers could check out the latest offerings from John Deere.

Attachments

SECTION

Pages 31-35

RX Hydraulic Breaker Attachment Fits Full Range of Sizes The Chicago Pneumatic RX Hydraulic Breaker line offers 13 models which are designed to match various application needs found in demolition, primary/secondary breaking, ditching, recycling, road construction and landscaping. The breakers fit carrier classes ranging from 200 ft./lb. to the 10,000 ft./lb. class. RX hydraulic breakers feature a hybrid gas/oil technology and are engineered with fewer components and working parts to maintain. The CP power boost feature on the RX models is designed to achieve higher breaking performance in tougher applications without requiring additional hydraulic input. While the impact energy remains constant, the breaker increases blow frequency, which is said to result in enhanced percussive performance. The power stop function found on models RX14 and up reduces blank firing, and is designed to protect the breaker and carrier while increasing the working life of the components. The larger models in the Chicago Pneumatic RX line, RX25 through RX53, feature a power control valve, which enables the operator to adjust the breaker’s performance according to the application. The RX25-RX53 models also feature a fastening system that uses head bolts and insert threads to distribute torque equally. The RX line has been designed to provide increased noise and vibration damping. The hydraulic breakers also feature a new style of internal control valve, which has proved to be more efficient than other designs. For more information, visit www.cp.com.

The RX Hydraulic Breaker line offers 13 models which fit carrier classes ranging from 200 ft./lb. to the 10,000 ft./lb. class.

Pro-Tech New Sno Blade Attachments Feature Adjustable Wings, Versatility Pro-Tech has new Sno Blade attachments for winter maintenance. Featuring independently adjustable wings, the products add extra versatility to the company’s existing line of Sno Pusher containment plows. Sno Blades come with a universal coupler for attaching to skid steers, and they have a rear mount option for compact tractors. The AB07S includes a 7.5-ft. (2.3 m) wide moldboard, and the AB09S comes with a 9 ft. (2.7 m) wide moldboard. Both models come standard with 1-ft. (.3 m) wide, multi-positional wings, which can

be manually adjusted to nine different positions according to the operator’s needs. This design allows Sno Blades to act as pushers, straight blades or variations inbetween. Furthermore, the moldboard can be hydraulically angled 30 degrees left or right. To avoid damage to the equipment and property, the Sno Blade features a bolt-on, reversible steel edge with four trip springs. It also incorporates a floating design for adjusting to ground contours, creating optimal down pressure and providing enhanced scraping performance, according to the manufactur-

er. Other standard features include a deflector kit, curb guards, hydraulic hoses and adjustable-depth shoes. In addition to the Sno Blade Pro-Tech also offers its Sno Blower and Sno Broom attachments, as well as a full line of Sno Pusher containment plows. For more information, call 888/787-4766 or visit www.protechcorp.com.

Page 32 • May 28, 2011 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Edge Pallet Fork Frame With Grapple Clamps Small, Large Objects The Edge pallet fork frame with grapple from CEAttachments is an ideal attachment for clamping anything from small pipe to large culverts and also works for moving plywood and other building materials. Features include a single cylinder grapple with a unique jaw action that pulls material toward the frame as the jaw closes. The most unique feature of this Class II frame is the four optional settings where the cylinder is pinned to the grapple, which maximizes the grapple opening or closing force and ability. The positions can be changed in minutes and enable the grapple to close down below the tines or open wider than the frame, allowing the operator to clamp anything from small pipe to large culverts. Two hooked grapple arms also clamp material secure for pickup and transport of material such as plywood or other building supplies, according to the manufacturer. The Edge pallet fork frame with grapple is capable of grabbing and carrying load capacities up to 5,000 lbs. (2,268 kg) and utilizes the same Class II tines as other Edge pallet forks. Recommended for loaders with operating capacities greater than 1,500 lbs. (680 kg) and comes complete with hoses and flat-faced couplers. This attachment has an overall width of 47 in. (119 cm) and a grapple opening up to 56 in. (142 cm). For more information, visit www.ceattachments.com.

The Edge pallet fork frame with grapple is capable of grabbing and carrying load capacities up to 5,000 lbs. (2,268 kg) and utilizes the same Class II tines as other Edge pallet forks.

SweepEx’s Mega 720 Broom Attachment Is Largest Yet

Ideal for a wide variety of applications, including cleanup of dirt, leaves, snow, material spills, standing water, steel shavings and gravel, the SweepEx Mega Series broom attachment is adaptable to most service vehicles.

The SweepEx Mega 720 broom attachment is built with a 72-in. (183 cm) long mainframe, making it the largest unit within the Mega Series line. Ideal for a wide variety of applications, including cleanup of dirt, leaves, snow, material spills, standing water, steel shavings and gravel, the SweepEx Mega Series broom attachment is adaptable to most service vehicles. Mounting kits for forklifts, bucket lips, threepoint hitches (class 1 and 2) and skid steer pivots are available to maximize the broom’s versatility. Designed for high productivity and minimum down time, SweepEx brooms are built with no moving parts, eliminating the cleaning and lubrication of sprockets and bearings typically associated with rotary-style brooms. Brush replacement is quick and easy with the unique brush section system. By simply detaching the rugged end protectors, the broom’s brush sections are easily replaced, rotated or removed. The modular construction of the

SweepEx line minimizes dust and flying debris, protecting the operator, machinery and work environment. The broom’s polypropylene brush sections offer both durability and flexibility. Constructed of industrial steel and protected with a heavy powder-coat finish, the Mega Series includes 11 brush rows for maximum cleaning power. With the ability to attach MegaWing 90 (9in. [22.8 cm]) and MegaWing 180 (18-in. [45.7 cm]) broom extenders to each end of the broom, the Mega 720 can be increased up to 108 in. (274 cm) for the largest applications. Other SweepEx Mega Series models include the Mega 480 (48in. [122 cm] mainframe) and Mega 600 (60-in. [152 cm] mainframe). Optional accessories for all SweepEx models include a magnetic bar, dustmop, edge marker kit and the debris containment ends. For more information, call 800/725-8377 or visit www.trynexfactory.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 28, 2011 • Page 33

RX Hydraulic Breakers… 13 models – match the breaker to the job Hybrid gas/oil technology Designed with fewer components to maintain Power Boost to increase blow frequency Power Stop to safely prevent no-load blows On-site easy maintenance Innovative, reliable, heavy-duty … for demolishing, primary/secondary crushing, ditching, recycling, road construction, and landscaping!

800.760.4049 www.cp.com

Think RED...Think Chicago Pneumatic!

Page 34 • May 28, 2011 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

CUT-R-TACH Designed for Range of Asphalt Cutting Jobs

99% of Americans have seen combat on TV. 1% of Americans have seen combat in Iraq or Afghanistan.

The 190C clamps directly to the buckets of tractor loader backhoes and wheel/track type loaders without special tools, modifications or adapters.

We know where you’re coming from. If you’re a veteran of Iraq or Afghanistan, you’re not alone. We’ve been there. Join us at CommunityofVeterans.org

General Equipment Company’s 190C CUT-R-TACH rotary asphalt cutting attachment is specifically designed as a heavyduty, high production solution to a wide range of asphalt cutting projects. The 190C clamps directly to the buckets of tractor loader backhoes and wheel/track type loaders without special tools, modifications or adapters. Its twin screw clamping mechanism guarantees a tight fit in both forward and reverse cutting directions, according to the manufacturer. A 19-in. (48 cm) diameter cutting blade is machined from a special service duty, alloy steel and yields a maximum asphalt cutting

depth of 5.5 in. (14 cm). The unit is designed to handle a maximum downward force of 50,000 lbs. and the blade life expectancy is in excess of 25,000 lineal ft. (7,620 m). Blades are fully field replaceable without disturbing bearings or seals. The CUT-R-TACH unit features unitized, welded steel plate construction that is reinforced at critical stress areas. It is capable of cutting up to 6,000 lineal ft. (1,829 m) per hour in high density asphalt and is an alternative to conventional sawing and jackhammering methods. For more information, call 800/533-0524 or visit www.generalequip.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 28, 2011 • Page 35

Page 36 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Renovation of Historic Ind. Bridge Almost Complete By Braden Lammers NEWS AND TRIBUNE

CHARLESTOWN, Ind. (AP) A bridge built a century ago is again nearing completion, which will allow access to an area along the Ohio River that was a popular tourist attraction 90 years ago. The reconstruction of the Portersville Bridge, originally built by Vincennes Bridge Co. in 1912, has been moved from its location spanning Dubois and Daviess counties over the East Fork of the White River to Charlestown State Park. The bridge is being rebuilt to span Fourteenmile Creek in order to re-establish access to Rose Island, a former 1920s amusement park. The project has been under way since November 2008. “The bridge is expected to be completed in late June,” said Tom Hohman, director of Indiana’s Department of Natural Resources engineering division. “The completion date is somewhat dependent on construction weather, as it includes paving of a trail down to the bridge.” Officials decided to use a pre-existing bridge even though the cost to dismantle, move, refurbish and reconstruct an old bridge was slightly more than the price of building an entirely new one. “The cost of using the historic span was a bit more, but not much more,” said Jim Barker, engineer and president of Bloomington-based J.A. Barker Engineering Inc., which devised the plan to move the bridge. “It was equivalent.” “But you have the advantage of having a piece of history,”

Hohman said. Barker added the opportunity to save a piece of public works architecture like the Portersville bridge is “really unique.” A reason the cost of $2.4 million was still an advantage to the state park was the removal and reconstruction was paid for through grant funding. “Back when this was proposed, we were looking for a historical bridge so we could get some grant money and we were able to do that,” said Larry Gray, property manager at Charlestown State Park. “We were able to get grant money to fund the majority of that bridge. The grant wasn’t available for a new bridge.” He said while the bridge is designed to be safe enough to drive over with a vehicle, it will be used primarily as a pedestrian crossing. The bridge is a “camel-back bridge,” consisting of two 178-ft. 6-in. spans and totals 357 ft. The bridge is eligible for the National Register of Historic Places, even though the decking and railings being added to the bridge will be new. “Most of the structural part of the bridge is original,” Gray said. Barker said about 95 percent of the main tresses are the original portions of the bridge and the pieces replaced were largely because of localized rust. To transport the bridge from its former location, it was removed using a crane to dismantle the bridge an entire span at a time, Hohman said. Once the span was removed, it was

Cincinnati Addition…

Murphy Tractor Names Territory Sales Manager Murphy Tractor has named Robert Allee as new territory sales manager in the Cincinnati area. Allee has 12 years experience in the heavy equipment industry and has worked for equipment dealers as well as heavy highway contractors. Allee will cover the western Cincinnati and surrounding counties territory. Murphy Tractor and Equipment Company, Inc., one of John Deere’s largest North American construction equipment dealer organizations, is headquartered in Wichita, Kan., and has 26 locations throughout the mid-western states of Iowa, Kansas, Missouri, Ohio, Pennsylvania and Nebraska. For more information, visit www.murphytractor.com.

placed on the ground nearby and disassembled, each piece being marked for reassembly. During the process, the pieces of the bridge were cleaned, painted and inspected before they were put back together in Charlestown. And the bridge is nearing completion. Once the bridge is finished, Gray said the park will likely pursue a second grant-funded project for archaeological work on Rose Island. That work will explore the area that was an amusement park. The area was developed by David Rose in the early 1920s, which he subsequently named Rose Island, even though the land is actually a peninsula adjacent to the Ohio River. “I can only assume he called it Rose Island to catch everybody’s attention,” Gray said. The amusement park closed after it was destroyed by the great flood in 1937, but remnants of the tourist attraction still remain at the site. After the flood closed down the park, the land was part of the purchase for the Indiana Army Ammunition Plant. When the plant closed, the land was deeded to Charlestown State Park, but has remained off limits to park visitors for decades. With the construction of a historic iron bridge providing access to Rose Island, the historical remnants, as well as new trails, will provide walking paths for visitors to the state park. In addition, he said the park may put up educational features to explain what existed at the site, but leave the largely wooded area alone, Gray said. “That whole area is historically significant,” he said.

ARTBA Lauds Women Leaders in Design, Construction The American Road & Transportation Builders Association (ARTBA) is launching a new awards program to honor “extraordinary efforts of individuals, companies and public agencies that have demonstrated leadership and dedication to innovation in the transportation construction field as well as the promotion of women leaders within the industry.” The 2011 “Women Leaders in Transportation Design & Construction Awards Program” includes three categories: • The Ethel S. Birchland Lifetime Achievement Award: Named after ARTBA’s executive director from the mid-1920s, it is given to at least two women who have demonstrated outstanding leadership and long-term service in the industry’s public or private sectors. • The Glass Hammer Award: It honors three companies in the transportation construction industry that have innovative programs and activities directed at successfully promoting women leaders within their organization.

• Future Industry Spotlight Award: It recognizes two women students enrolled in undergraduate or graduate studies at a U.S. college or university who have achieved an outstanding academic record and demonstrated extraordinary leadership skills within and outside the academic environment. ARTBA membership is not required. Nominations, available at www.artba.org/womenleaders must be received by close of business July 29. Winners will be recognized at a gala dinner on September 7 during ARTBA’s “TransOvation 2011 Workshop,” held at the Landsdowne Conference Center near Dulles Airport in Virginia. The awards program is a signature initiative of the association’s Women Leaders in Transportation Design & Construction Council, which promotes “leadership and career advancement for women in the industry through mentoring, recognition, educational activities and networking.” For more information, call 202/289-4434.

Pages 37-47

Crushing, Screening & Recycling Section Sandvik Develops QI240, Recycling Impact Crusher Purpose designed to process construc• The QI240 is fitted with an underpan tion materials on site, Sandvik’s QI240 feeder which reduces any spillage issues crusher has been designed with mobility, generally associated with impact crushproductivity, transportability, minimal ers. The underpan feeder eliminates the environmental impact and user friendlineed for skirt rubbers that are normally ness at its core. situated in the severe impact zone of a The QI240 utilizes Sandvik impactor feed boot. technology enabling the development of a • The underpan feeder also protects the fully mobile, compact impact crusher main product conveyor from high velocidesigned to either work in a primary or ty material from the rotor. This material is secondary capacity either independently contained on the wear resistant under-pan or in conjunction with other members of feeder liners and gently delivered onto the the Sandvik product line. Although conveyor belt. designed for the recycling of construction • The Sandvik Pri-Sec impactor is materials, the Sandvik impactor design among the most flexible impactors curenables the QI240 to be a practical impact rently available. crusher for the smaller quarry. Its compact • The two hydraulically adjustable design is useful where space and machine apron curtains can be positioned to facilimaneuvability are at a premium, but prodtate the machine’s operation as a primary uct shape and high levels of production The QI240 is fitted with a pre-screen to ensure maximum scalping capability in order to impactor but also can be repositioned to are required, according to the manufactur- prevent any undersize material passing through the impactor. operate as a secondary impactor to proer. duce much smaller end products. ified sized product to be produced from the natural fines conThe QI240 possesses recent developments including: • The above combined with the variable engine speed • The machine is fitted with a pre-screen to ensure maxi- veyor. gives a tip speed range of 98 to 121 ft. (30 to 371 m) per sec• With a choice of grizzly, punch plate or heavy duty top ond, resulting in a wide variety of product specifications mum scalping capability in order to prevent any undersize material passing through the impactor, thereby maximizing deck mesh, the QI240 possesses the flexibility to suit any being achievable. throughput and reducing wear costs. This also allows a spec- application. For more information, visit www.sandvik.com.

Doppstadt Launches SM Trommel Star Screen Insert For operations that process organic material, extremely wet conditions have a negative impact on productivity. To maintain high throughput, the Doppstadt SM 720 and 720K trommels can now quickly convert into a star screen with the drum insert option. Simply remove the existing drum, replace with the star screen insert, and resume operation. Equally as effective as a dedicated standalone star screen, the star screen insert allows customers to extend the flexibility of their existing SM 720 trommel throughout any season and conditions, according to the manufacturer. Wet, clumpy organic material with moisture content as high as 60 percent or more can continue to be processed, with throughput results as much as 50 percent higher than screening through a drum. The Doppstadt star screen works on a revised principle utilizing a softer urethane

star design for extended life. The star shape on the shaft is elliptical, rather than conventionally round, which aids dramatically in shaft cleaning. Alternate shaft speeds on the deck are effective in the stratification of material feed, leading to a cleaner oversize product and increased production rates, according to the manufacturer. “This is a great option for customers to maintain full function of their trommel all year,” added Hugh Fagan, DoppstadtUS sales director. “It eliminates the need for many operations to invest in a second machine for only partial use in certain conditions.” The star screen insert for SM 720 and 720K trommels is now available in the United States market. Doppstadt will be releasing a star screen insert compatible with the SM 617 and SM 726 trommels later this year.

The Doppstadt SM 720 and 720K trommels can now quickly convert into a star screen with the drum insert option.

Page 38 • May 28, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Rockster’s R1100 Crushes Up to 350 Tons Per Hour The Rockster R1100 impact crusher is 32 tons (29 t) total weight and crushes up to 350 tons (317.5 t) per hour. With this machine Rockster has entered a new performancedimension within the compact crushing class. “Our existing series of mobile crushers, with the 25-tons plant R900 as biggest machine has already proved itself and consolidated its position on the international market,” said Rockster CEO Wolfgang Kormann. “However, additionally we got more and more requests from our distribution partners concerning a bigger machine, covering a wider market segment. The target: a crusher that still features compact transport dimensions, but at the same time boasts a performance level of more than 300 tons per hour, adequate for covering major transactions.” The result is a machine which fits into the existing product line and features a variety of technical highlights: as well as the R900 and R800, the R1100 is equipped with a fully hydraulically drive system. Furthermore, the R1100 features a 2-step and 6 ft. (1.8 m) long pre-screener. This ensures not only a maximum pre-screening quality, but also a further increase of the throughput rate, a reduction of the wear costs as well as a perfect separation of final material and earthy substance, according to the manufacturer. Two in One: Rockster Duplex Exchange System The two bigger models R900/R1100 (impact crusher) and R800/R1200 (jaw crusher) are constructed in a completely identical design, in order to realize the creation of a crusher exchange system — the Rockster duplex system. Both crushing units are interchangeable and can be

The new Rockster Impact crusher R1100 with screening box RS94 and return belt RB85 producing high quality final products.

installed on the same machine through the identical drive system. Within only fours hours the impact crusher can be transformed into a jaw crusher — and vice versa.

Within only fours hours the impact crusher can be transformed into a jaw crusher — and vice versa.

The headquarters of Rockster in Austria opened in 2009. Wolfgang Kormann, CEO and founder of Rockster Recycler.

The R1100 together with screening box and return belt are easy to transport without dismantling the optional equipment.

Produce Defined Final Grain in Only One Step With the available optional products, the Rockster crushers can be transformed into a crushing and screening combination producing a 100 percent defined final product with just one machine. Adding the 1-deck screening box RS83/94 and the return belt RB75/85 for bringing back the oversize material into the crushing process, is very easy and can be done in shortest time, according to the manufacturer. These options don’t require any separate drive system as they are driven by the additional hydraulic unit of the crushing plants. The whole combination can be left on the crusher for transport. For more information, visit www.rockster.at.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2011 • Page 39

THE REVOLUTION BEGINS...

EXODUS MACHINES INNOVATIVE

AMERICAN MADE

NO COMPROMISE

JOIN THE REVOLUTION

The Premier Midwest Equipment Dealer

320 Briscoe Drive Morris, IL 60450 800-941-2133

200 Erb Industrial Drive Fenton, MO 63026 636-349-0200 Cape Girardeau, MO 63703 573-334-0563

Foristell, MO 63348 636-673-2131

Mt. Vernon, IL 62864 618-244-6800

Owensboro, KY 270-684-2339

Cuba, MO 65453 573-885-0500

Paducah, KY 270-554-1131

Evansville, IN 812-473-0484

Page 40 • May 28, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

PO Box 104524 4303 RT. CC Jefferson City, MO 573-635-8700 (Serving Missouri and Eastern Kansas)

250 Cross Pointe Blvd. Evansville, IN 47716 812-425-2742 Fax: 812-425-2742 www.ampatequip.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2011 • Page 41

CRUSHING EQUIPMENT, PARTS & SERVICE Terry Hennessey 800-845-9188 terry.hennessey@fabickcat.com

Fenton, Missouri 800-845-9188 www.fabickcat.com

Go to www.fabickcat.com for a complete listing and description of our new and used equipment.

Portable Screen Telsmith offers an array of inclined and horizontal portable screening plants that have been designed to meet the variety of challenges encountered in different applications. Whether you need the ruggedness required when scalping large stone, to the finesse necessary for finish sizing, Telsmith has an efficient portable solution to meet your site needs.

Model TJ3258 - Jaw Crusher Designed around the Telsmith 3258 hydraulic jaw crusher, the TJ3258 is specifically designed to deliver high production while processing hard, abrasive stone. With a large crusher gape and width, the 3258 processes larger feed and has greater crushing capacity than competitive models. The 3258 jaw also incorporates unique hydraulic features proven to reduce maintenance and downtime to an absolute minimum: • Hydraulic Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Chamber Clearing: safely clears the crusher in minutes for increased uptime.

Model TI6060 - Impact Crusher Featuring the heavy duty Telsmith PA6060 Primary Impact Crusher, this plant is engineered for maximum productivity while processing less abrasive quarried stone or concrete recycle. Capable of receiving 40” stone or 58" wide concrete slabs, the PA6060 has proven to be a dependable, low cost producer. Advanced hydraulic features built into the PA6060 reduce maintenance and downtime providing increased production: • Hydraulic Apron Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Tilt Feed Plate: safely clears bridging in minutes for greater uptime.

DID YOU KNOW? For over a hundred years, Telsmith has designed and manufactured in the United States of America.

Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures and services a range of jaw, cone and impact crushers as well as single-deck to quad-deck screens.

Page 42 • May 28, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

The Raptor XL1100 cone crusher can draw up to 1,200 hp (894 kW), delivering production capabilities of up to 2,240 tph (2,000 t) at a 1-1/3-in. (3.3 cm) closed-side setting.

U-SCREEN C-36 NEW!

Raptor XL1100 Ideal for High-Tonnage Operations it’s not ’s fault

by TheShelterPetProject.org

Dealer Inquiries Invited Designed For Skid Steers, Loaders & Excavators • Screen 500 to 600 yards per day • Any Size Screen Available • Stacking Height: 9’ • Width: 5’6” • Length: 28” • 6’x5’ Screening Deck

• Easy Change Screens • 25 HP Kubota Diesel Power • Hydraulically operated Screen • Hydraulic trailer axle • 30” Hydraulic Conveyor Belt • Towed with 1 Ton Vehicle

www.u-screen.com 905 Turnpike Street • Canton, MA 02021

1-866-USCREEN (781) 828-9100 • Fax: (781) 821-8807

The Raptor XL1100 cone crusher, from FLSmidth Pekin LLC can draw up to 1,200 hp (894 kW), delivering production capabilities of up to 2,240 tph (2,000 t) at a 1-1/3-in. (3.3 cm) closed-side setting. Ideal for hightonnage mining operations, the unit handles feed size up to 24 in. (62 cm) and allows a reduction ratio of up to 6:4. The Raptor XL1100 cone crusher incorporates a heavy-duty hydraulic design that improves the durability of the tramp release components, while reducing the number of accumulators required. This hydraulic configuration reduces ongoing maintenance costs while delivering performance and reliability, according to the manufacturer. FLSmidth’s “fail safe” hydraulic protection system also provides an external relief that prevents severe structural overloads if an accumulator bladder should fail — protecting both the hydraulic system and the crusher. Advanced overload sensing technology detects crushing force overload. A simple alarm is activated, or the system can be automated to take corrective action. This same advanced automation system can be used to optimize crusher performance, with feed control, setting adjustment and monitoring of all critical lubrication and hydraulic parameters. Powered by a 1,000 hp (745 kW) motor, the XL1100 cone is designed to operate and

remain mechanically sound at a wide range of eccentric speeds. Because of this versatility, the eccentric speed can be selected to maximize throughput, size reduction and product yield. Eccentric surface finish is critical to bearing longevity under high-performance crushing conditions, and the XL1100 cone’s advanced eccentric is a nodular iron casting of high-strength material with machinability and surface finish characteristics. The Raptor XL1100 cone has an alloyed cast steel threearm frame with one oversized arm used for the countershaft cartridge. The Raptor XL1100 cone crusher employs spiral-bevel gear technology for a combination of durability and reliability while minimizing gear noise. Available with shorthead or standard bowls, the XL1100 cone is practical for secondary, tertiary and quaternary applications. An additional safety feature standard on all Raptor models is the counterclockwise rotation crushing action that protects the machine if adjustment ring movement is excessive or if the ring gear brake fails, according to the manufacturer. The growing family of Raptor high-performance cone crushers includes the XL300, XL400, XL500, XL600, XL900, XL1100, XL1300 and XL2000. For more information, call 801/871-7000 or visit www.FLSmidth.com/Raptor.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2011 • Page 43

SALES • SERVICE • RENTAL • PARTS Setting the standard in portable screening, washing, crushing & recycling equipment. Count on Powerscreen Pegson and our team of sales experts to provide the right solution for your quarry, mining or recycling needs.

EFFICIENCY + RELIABILITY = PROFIT CALL ON THE EXPERTS. CONTACT YOUR LOCAL POWERSCREEN PEGSON DEALER TODAY Serving

Serving

INDIANA

MICHIGAN

MINNESOTA

OHIO

Powerscreen of Indiana, Inc. 255 N. Hetzler Court Angola, IN 46703

Powerscreen of Michigan 7819 West Jefferson Detroit, MI 48209

Theco, Inc. 5470 Quam Ave. NE St. Michael, MN 55376

AGGCORP P.O. Box 219 Westerville, OH 43086

(800) 843-4277

(313) 841-8370

(800) 776-0335

(614) 309-6854

www.powerscreenindiana.com

www.powerscreenofmichigan.com

www.thecoinc.com

www.aggcorp.net

Page 44 â&#x20AC;¢ May 28, 2011 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ Recycling Section â&#x20AC;¢ Construction Equipment Guide

These Grinders Mean Business.

Visit One of These DuraTech Dealers Today!

5064 Horizontal Grinder 'XUD7HFKÂ·V YHUVDWLOH 1(: +RUL]RQWDO *ULQGHU LV EXLOW WR PHHW DOO \RXU JULQGLQJ QHHGV 1RW RQO\ LV WKH DYDLODEOH RQ HLWKHU D WUDFN RU WUDLOHU EXW \RX FDQ DOVR FKRRVH IURP WKUHH GLIIHUHQW OHYHOV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS NZ WR KS NZ 7KH ODUJH IHHG RSHQLQJ DQG LQ KDPPHUPLOO PD[LPL]H JULQGLQJ FDSDFLW\ DQG PLQLPL]H MRE WLPH 7KLV PLGVL]HG JULQGHU LQFUHDVHV \RXU HIÃ&#x20AC;FLHQF\ DQG PD[LPL]HV \RXU LQYHVWPHQW

Swanston Equipment Co. 3450 West Main Fargo, ND 58103 888-792-3192

PO Box 1940 â&#x20AC;¢ Jamestown, ND 58402-1940

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2011 • Page 45

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com Sterling Hts, MI Wixom, MI 586-977-6000 248-449-6700 Muskegon, MI 231-798-8754

Zeeland, MI 616-748-4108

Kentwood, MI 616-698-2960

Lansing, MI 517-272-5033

Battle Creek, MI 269-965-1269

Wixom, MI (Cons. Division) 248-356-5200

Romulus, MI 734-641-8238 Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

BRANDEIS MACHINERY & SUPPLY COMPANY

HOWELL TRACTOR & EQUIPMENT LLC

GIBSON MACHINERY LLC

www.brandeismachinery.com

www.howelltractor.com

www.gibsonmachinery.com

Gary,IN 800-852-8816 Peru, IL 800-342-6072

Oakwood Village, OH 440-439-4000

Louisville, KY 502-491-4000 Evansville, IN 812-425-4491 Corbin, KY 606-528-3700 Lexington, KY 859-259-3456 Stanville, KY 606-478-9201

Paducah, KY 270-444-8390 Indianapolis, IN 317-872-8410 Ft.Wayne, IN 260-489-4551 South Bend, IN 574-233-8770

Neville Island, PA 800-843-1205

ROLAND MACHINERY CO. www.rolandmachinery.com Depere, WI Carteville, IL 920-532-0165 618/985-3399 Bridgeton, MO 314-291-1330

Deforest, WI 608-842-4151

Columbia, MO 573-814-0083

Eau Claire, WI 715-874-5400

Cape Girardeau, MO 573-334-5252

Schofield, WI 715-355-9898

Palmyra, MO 573-769-2056

Escanaba, MI 906-786-6920

Franksville, WI 262-835-2710

Page 46 • May 28, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

only 2 gph!

only 8-10 gph!

GREEN. LIKE MOTHERNATURE-HITS -THELOTTO GREEN. It’s nice when the environmentally responsible thing and the profitable thing are one in the same. That’s exactly what being FRAP Ready brings to your operation. By incorporating a high percentage of Fractionated Reclaimed Asphalt Pavement into your mix, you will: Reduce the amount of virgin rock mined, use less oil, decrease the energy used for processing, conserve the energy used for trucking and lessen the pollution and CO produced at each step of the process.

SHRED. SHRE D.

SCREEN.

GRIN GRIND. D.

SORT. SORT T.

only 8-16 gph!

DO. DoppstadtUS soil and mulch solutions.

Oh, and you’ll also make money. Lots of it. The advantages of a FRAP Ready operation go well beyond being green. Use our online calculator at www.beFRAPready.com to learn what being FRAP Ready can mean to your operation.

KPI-JCI FT4250

Calculate just how much you can save at beFRAPready.com.

12500 South Cicero Ave. Alsip, IL 708/389-7700 Villa Park, IL 630/530-7600

Rockford, IL 815/227-0555

Brandeis Machinery & Supply Co. www.brandeismachinery.com Evansville, IN (812) 425-4491 Ft. Wayne, IN (260) 489- 4551 Indianapolis, IN (317) 872-8410 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Louisville, KY (502) 491-4000 Paducah, KY (270) 444-8390 Stanville, KY (606) 478-9201

Gibson Machinery LLC www.gibsonmachinery.com Oakwood Village (Cleveland) OH (440) 439-4000 Neville Island (Pittsburgh) PA (800) 843-1205

East Peoria, IL 309/694-4455 Springfield, IL 217/789-0351

CONTACT CONTTACT ACT US TODA TODAY AY Y FOR A PERSON PERSONAL NAL DEMONSTRA DEMONSTRATION ATION TION www.groundworx.ca | Toll Free 888.222.2670 | Sales Direct 780.887.7123

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2011 • Page 47

Powerscreen + Scania = Tier 4 Compliance

Powerscreen combines global resources, decades of experience crushers, screens and wash plants to match your needs. You can depend depe on your Powerscreen dealer for knowledgeable advice, skilled installation and responsive local support. Powerscreen machines with engines in the power range above 175hp now use engines from the global manufacturer, Scania. Scania’s engines are renowned for high uptime and reliability, proven fuel efficiency, and ease of maintenance. Scania has an excellent worldwide reputation and proven track record, and offfers f customer support with mor m e than 190 service locations across USA & Canada.

Powerscr Powerscreen een 11001 Electron Drive Louisville, Kentucky 40299

Visit us at stand 140.

Tel: T el: +1 502 736 5233 Email: gerald.mccarthy@powerscreen.com Web: Web: www.powerscreen.com

Terex is a registered trademark ark of T Ter erex Corporation in the United States of America and many other countries. Powerscreen is a registered trademark of Ter Terex GB Ltd in the United States of America and many otherr countries. Copyright T Ter erex Corporation 2011.

Page 48 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LIKE NEW LOADERS AT LESS THAN HALF THE PRICE!!! $78,000 JD 644E tool carrier tractors, Complete factory remanufacture in 2001, Marine Corps contract. Everything was gone through (engines, axles, transmissions, pivots, etc) at that time and the units have very low hours since the remanufacture process. Erb is putting on new paint, new air conditioning units, new 4 yd buckets. Units vary in hours and pricing. Pricing for a unit with less than 1900 hrs, with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber. $78,000

JD 310G, Cab, 4x4, Ext Hoe, Aux Hyd, #U10594 ........................$39,500

JD 750J, LGP, 34" Case 580SM, Cab, Air, JD 550H, 24" Pads, 4x4, Ext Hoe, Thumb, 121" Blade, #U8957 ...... Pads, 156" Blade, ........................$49,000 #U10732 ........$115,000 #U10726 ..........$39,500

JD 624J, Cab, Air, QC, JD 200CLC, 9' 6" Arm, 32" Pads, #U10541 ...... 3.5 yd Bkt, #U10345 .... ........................$59,500 ........................$116,000

JD 655C, Cab, Air, Std JD 744E, Cab, 4.75 yd JD 120C, 9' 11" Arm, Aux Hyd, #U10431 ........ Track, GP Bkt, #U9662 Bkt, #U9565 ....$49,000 ........................$59,000 ........................$49,000

NPK Hammers, All Sizes Rent or Purchase

ERB EQUIPMENT CO., INC. Sales, Rental, Parts & Services Of: John Deere, Liebherr, Bomag, NPK & Trail King

Call Industrial Sales At (636) 349-0200 Toll Free (866) 372-7368 Email: Mattheisel@erbequipment.com

VIEW COMPLETE INVENTORY (OVER 300 UNITS)

8 Locations To Serve You Fenton, MO Wentzville, MO

Mt. Vernon, IL Cape Girardeau, MO

Paducah, KY Cuba, MO

Owensboro, KY Evansville, IN

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 49

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710

www.midcountrymachinery.com

2007 John Deere 350DLC A/C, Plumbed, 60” Bucket, Excellent Condition ..................................................................................$155,000

2006 Komatsu PC 400LC-7 A/C, Long Stick, 1,200 Hrs, One Owner, Excellent Condition....................................................................$190,000

2007 Cat D6N XL Cab, A/C, 6-Way Blade, 1,400 Hrs, Excellent Condition ..................................................................................$159,000

EXCAVATORS

COMPACTORS

MINI/MIDI EXCAVATORS

2010 Kobelco SK-260LC8 EROPS, A/C, Heat, 60’ LR, 183 Hrs ..$225,000

2007 IR SD122F 84" Padfoot w/Blade, 177 Hrs ..............................$85,000 2007 Dynapac CA250PD Excellent Condition, 195 Hrs ..................$79,000 2006 Dynapac CA250D Excellent Condition ......................................P.O.R. 2006 IR SD77DX 66" Smooth Drum, 500 Hrs ..................................$50,000 2006 Cat CP433 E 66" Padfoot w/Blade, 603 Hrs............................$47,500 2005 IR SD100D-TF 84" Smooth Drum, 500 Hrs ............................$69,500 2005 IR SD70D OROPS, 66" Smooth Drum, 787 Hrs......................$42,000 2004 IR SD70D 66” Smooth Drum, 830 Hrs ....................................$49,500 2003 IR SD100F 84" Padfoot, 609 Hrs ............................................$59,000 2003 IR SD77F 66" Padfoot w/Blade, 2961 Hrs ..............................$32,000 2003 IR SD45F..................................................................................$32,000 2002 Vibromax W605PD Single drum padfoot compactor ..............$27,000 1999 IR SD70F OROPS, 66" Padfoot, 2,500 Hrs ............................$35,000 1998 Cat CP232C 54” Padfoot, 1610 Hrs ........................................$22,500 1996 Stone PD43 48” Padfoot Roller, 4375 Hrs ..............................$11,500

2009 Kobelco 35SR EROPS, A/C, 380 Hrs ....................................$41,000 2009 Boxer 322D 30” GP Bucket ....................................................$19,000 2008 Kobelco 80 CS EROPS, A/C, New, 545 Hrs ..........................$70,000 2008 Kobelco SK 70 SR Steel or Rubber, EROPS, A/C, 425 Hrs ..$65,000 2008 Kobelco 17SR OROPS, Expandable Tracks ............................P.O.R. 2007 Takeuchi TB138FR OROPS, Good Condition, 540 Hrs..........$35,000 2007 Kobelco 13SR OROPS, Exc. Cond., 185 Hrs ........................$17,000 2001 IHI 35NX OROPS, 18” Bkt, 3500 Hrs ......................................$17,000

2010 Gradall XL4100 6x4, A/C ..........................................................P.O.R. 2009 Kobelco ED195 Blade Runner, A/C, Plumbed ......................$152,000 2009 Kobelco SK-210LC EROPS..................................................$155,000 2008 Kobelco ED150 Blade Runner, A/C, 2445 Hrs......................$130,000 2008 Kobelco ED150 Blade Runner, EROPS, A/C ........................$110,000 2007 Kobelco SK-350LC8 EROPS, A/C, Plumbed, 1800 Hrs ......$170,000 2007 Kobelco SK-290LC A/C, Standard Stick, 2,550 Hrs ..............$92,000 2007 Kobelco SK-170 LC8 EROPS, A/C, 1095 Hrs......................$108,000 2007 Kobelco 135SR LC A/C, plumbed, wide pads, 820 Hrs ........$92,000 2007 Hitachi ZX 200LC3 EROPS, A/C, 1065 Hrs ..........................$115,000 2007 Komatsu PC200LC-8 EROPS, A/C, 2050 Hrs......................$105,000 2006 Kobelco SK-330LC A/C, QC, 3,400 Hrs ................................$99,500 2006 Kobelco SK-290LC A/C, Excellent Condition, 1885 Hrs ........$99,500 2006 Kobelco SK-115SR A/C, Hyd. Thumb, Blade, 1250 Hrs ........$77,500 2006 Kobelco SK-330LC A/C, Plumbed, Excellent Condition ........$96,000

WHEEL LOADERS

2006 Hitachi ZX 350LC EROPS, A/C, 1042 Hrs............................$179,500

2010 Kawasaki 90ZV-2 EROPS, A/C, Heat, 553 Hrs ....................$265,000 2007 Cat 928GZ EROPS, A/C, Limited Slip Diff, 1737 Hrs ............$105,000 2007 NH W190, EROPS, A/C, 4.25 Yd GP Bkt, 900 Hrs................$145,000 2006 NH LW190B EROPS, A/C, GP Bkt, 3575 Hrs ........................$75,000 2006 Kawasaki 85Z EROPS, A/C, RC, 830 Hrs ............................$125,000 2006 Cat 938G II EROPS, A/C ......................................................$105,000 2005 Cat 950G EROPS, A/C, Heat, 5324 Hrs................................$129,500 2005 JD 544J EROPS, A/C ..............................................................$87,500 2005 Volvo L45B EROPS ................................................................$47,000 2004 Kawasaki KSS50Z EROPS, GP Bucket, 4370 Hrs ................$49,000 2004 JD 724J ....................................................................................$95,000 2002 JD 624H EROPS......................................................................$89,000 2001 Cat 902 EROPS, QC, 2,200 Hrs..............................................$37,500 1995 Cat 938F EROPS, 9887 Hrs ....................................................$54,000 1991 Cat 950F EROPS, A/C, 6477 Hrs ............................................$69,000

2005 Hitachi ZX 160LC EROPS, A/C, 2219 Hrs..............................$78,500 2004 Kobelco SK-135LRC EROPS, A/C ........................................$62,500 2004 Kobelco SK-330LC EROPS, A/C, Heat, 4995 Hrs ................$75,000 2008 Kobelco SK-210LC8 EROPS, A/C, Aux Hyd ..............From $125,000 2006 Cat 312CL A/C, Low Hrs..........................................................$79,000 2006 Case CX240 EROPS, A/C, Elc. Gen Set w/mag, 75 Hrs ......$145,000 2003 Cat 308CE EROPS ..................................................................$52,000 1997 Cat 325BL A/C, Great Condition, 6910 Hrs ............................$65,000 1995 Cat 325L ..................................................................................$45,000 1992 Cat EL200B 8334 Hrs..............................................................$35,000 1994 Gradall G3WD Track Mounted, Ex-County, 3500 Hrs ............$20,000

FORKLIFTS (3) 2011 SkyTrak 10054 New Unit..................................................$128,500 2007 SkyTrak 6042 EROPS/OROPS, 6000#, 42Ft, Tilt Car ............$52,000 2007 SkyTrak 6036 EROPS, Heat, 700 Hrs ....................................$52,000 2007 Lull 1044C-54 OROPS, 10,000#, 54Ft, 1100 Hrs ..................$72,000 2007 JLG G9-43A EROPS, Sidetilt, 9,000Lb, 43Ft, 1000 Hrs ........$61,000 2006 JLG G12-55A OROPS, 12,000#, 55Ft, 143 Hrs......................$99,500 2005 IR VR843C OROPS, 8,000#, 43Ft, 1700 Hrs ..........................$29,000 2004 SkyTrak 6036 OROPS, 6000#, 36Ft, 2500 Hrs ......................$34,000 2004 JLG G9-43A OROPS, 9,000#, 43Ft, 1500 Hrs........................$44,000 1998 Carelift 6044 6,000Lb, 44Ft, 3315 Hrs ....................................$19,000 1997 SkyTrak 10042 10,000#, 7733 Hrs ..........................................$29,000

LOADER/BACKHOES 2008 NH B95BTC EROPS, A/C, 4WD, E-Hoe, Pilot Controls..........$62,000 2008 JCB C3X EROPS, Heat, Ex-Hoe, Aux Hyd, 79 Hrs ................$69,000 2008 NH B95B EROPS, A/C ............................................................$57,000 2006 NH B95 EROPS, A/C, 747 Hrs ................................................$53,000 2006 JD 310SG EROPS ..................................................................$47,000 2005 NH LB110B EROPS, 731 Hrs..................................................$55,000 2005 NH LB75B EROPS, 4WD, E-Hoe, 630 Hrs ............................$49,000 (2) 2008 Cat 420E EROPS, A/C, Heat, Exc. Cond, Low Hrs ..........$92,000 2002 Cat 420D EROPS, A/C, 4x4, E-Stick, 4509 Hrs ......................$37,500

CRAWLER TRACTORS 2008 Cat D6T XW EROPS, A/C......................................................$239,000 2007 Cat D6T XL EROPS, A/C, Heat, 2956 Hrs ............................$245,000 2007 Cat D6R XL III PAT Blade, EROPS, Exc. Condition, 1845 Hrs ............ ........................................................................................................$227,500 2007 Komatsu D31 EX EROPS, A/C, 6-way blade, 1500 Hrs ........$49,000 2006 Cat D6R XW III EROPS, A/C, Heat, Semi-U Blade, 4340 Hrs ............ ........................................................................................................$177,500 2006 Cat D8T EROPS, A/C, SU Blade, 3730 Hrs ..........................$355,000 2006 JD 700J LGP EROPS, A/C, Heat ............................................$87,500 2004 Cat 963C EROPS, A/C, GP Bkt, 4700 Hrs ..............................$99,000 2005 Cat D6R XW EROPS, A/C, Semi-U Blade, 6520 Hrs............$140,000 2005 JD 700J XLT EROPS, A/C, 6-Way, 3100 Hrs..........................$75,000 2005 JD 700H LGP EROPS, A/C, 6-Way Blade, 3800 Hrs ..............$75,000 2004 JD 450H LT OROPS, 6-Way, 1300 Hrs ..................................$35,000 2002 Cat 963C, EROPS, A/C, GP Bkt, 8400 Hrs ............................$79,000 2002 Cat D3G XL OROPS, 6-Way, 1360 Hrs ..................................$32,500 2001 Komatsu D39EX-21 OROPS, 1473 Hrs..................................$39,500 1999 Cat D6R XL EROPS, A/C, Sweeps, 11,690 Hrs ......................$87,000 1996 Cat D6R XL EROPS ................................................................$85,000 1989 JD 850B 11,870 Hrs ................................................................$27,500 1989 JD 750B LT EROPS, Straight Blade, 8400 Hrs ......................$27,000 1979 Cat D6D OROPS, Straight Blade ............................................$37,000

GRADER/SCRAPERS/TRUCKS 2006 Cat 613C II EROPS, A/C, Exc. Condition, 1,500 Hrs ............$150,000 2006 Cat 160H EROPS, A/C, Ripper, 4900 Hrs ............................$185,000 2003 Cat 140H EROPS, A/C, 5000 Hrs..........................................$135,000 Cat 621 Hydraulic Pull Scraper, Excellent Condition ....................$32,000 (2) Cat 631B Pan Scraper, Excellent Unit........................................$35,000 Cat 631B Hydraulic Pull Scraper....................................................$30,000 (1) Kokudo 23SB Scraper ..............................................................$25,000 *OTHER MISCELLANEOUS EQUIPMENT, PARTS AND ATTACHMENTS NOT LISTED CALL IF YOU DON'T SEE SOMETHING YOU'RE LOOKING FOR

Page 50 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Let us re-introduce ourselves.

Formerly a division of Ingersoll Rand, we’re known for innovative solutions and inspiring service. We’re the portable power product that actually needs no introduction, except for our new name.

COMPR E SS O R S G E N E R AT O R S LIGHTING SYSTEMS

DOOSAN PORTABLE POWER.

DRILL AIR MODULES L I G H T COMPAC T I O N T RUCK- MOUNT ED EQUIPMENT

McAllister Equipment Co.

Aspen Equipment Co.

150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 (630) 530-1901

9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525

Alsip/Chicago (708) 389-7700

Doosan Power DoosanPortable Ingersoll Rand

Find Us on

E. Peoria (309) 694-4455 Rockford (815) 227-0555

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330

Springfield (217) 789-0351

DoosanPortablePower.com

Cape Girardeau, MO (573) 334-5252

(800) 633-5206

Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 51

RTL Equipment Inc. 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267 2601 120th St. NW Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Tough and rugged, the Terex® RT 130 is the crane of choice for the most demanding rough terrain applications. Other Terex® Cranes Products:

Telescopic Truck Cranes Boom Trucks All Terrain Cranes Crawler Cranes Lattice Boom Truck Cranes Tower Cranes Rough Terrain Cranes

Terex Cranes Waverly Waverly, IA Tel 319 352 3920 • Fax 319-352-5727 www.terex-cranes.com inquire@terexwaverly.com © 2008 Terex Corporation • Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.

For Your Local Terex Dealer, Please Contact: Waverly Operations 106 12th Street S.E. Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: inquire@terexwaverly.com web: http://www.terex-cranes.com

Page 52 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IAAP Holds 43rd Annual Convention Offers a Chance for Networking, Fun CONVENTION from page 16

(L-R): Jim Adler of ITT Flygt welcomes Stewart Vanraalte and Mark Carter, both of William Charles Construction Co., to his booth.

Chris Dodge of William Charles Construction Co. practices his putting at the Anderson Environmental & Engineering booth.

John Halloran (L) of Hanson Material Service and Clyde Kessel of Patten Construction Products are enjoying all the convention has to offer.

Matt Roland (L), president of Roland Machinery Co., catches up with his cousin Darin Roland of Central Stone Co.

Mike Maynard (L) and Jack Ackerman, both of TCI Manufacturing & Equipment Sales, are eager to great visitors to their company’s booth.

(L-R): Denny Hybarger of William Charles Construction Co., Jeff Lovgren of Astec Mobile Screens, Nick Wright and Clyde Robinson of McAllister Equipment Co., and Chris Dodge of William Charles Construction Co., spend some time talking about all the Astec Companies have to offer its customers.

Discussing the Telsmith crushing and screening lines of equipment (L-R) are Jerry Hall of Telsmith, Mark Noel of Shakespeare Aggregates Inc. and Terry Hennessey of the Fabick Companies.

Nowell Ludwig of Ludwig Explosives Inc. (C) stops by the Atlas Copco booth to say “hello” to Jeff Spritka (L) and Sturge Taggart, both of Atlas Copco.

(L-R): The G.W. Van Keppel Co. booth was well manned at the 43rd annual convention with Eldon Evans, Justin Hoelscher, Pat Meara and Jim Kniptash all ready for action.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 53

65 5 E ||Motor or Grad G Grader ra ad der de TURBO Moto

Compact Grader With Big Grader Features ILLINOIS BIRKEY'S CONST. EQUIPMENT construction.birkeys.com Galesburg (309) 341-4360 Bloomington (309) 827-0520 Mattoon (217) 235-3158 Urbana (217) 337-1781 DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon (618) 242-2273 WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville (630) 355-7150 Rockdale (815) 730-9011

Rockford (815) 961-3160 South Holland (708) 331-6362 Wauconda (847) 526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville (812) 425-4428 MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis (317) 545-2151 Indianapolis (317) 244-RENT (7368) Fort Wayne (260) 483-6469 (heavy equip.) (260) 969-3322 (rental store)

Lafayette (765) 449-8191 (heavy equipment) (765) 446-5600 (rental Store) Terre Haute (812) 478-3155 (heavy equipment) (812) 231-6000 (rental store) South Bend (574) 288-6622 Washington (812) 254-1712 Bicknell (812) 735-0286 Bloomington (812) 349-9220 Fishers (317) 598-9700 Greensburg (812) 663-5829 Richmond (765) 966-0626 Yorktown (765) 759-2CAT (2228)

OHIO CAT www.OhioCAT.com Sharonville (888) 332-4658 (Sales & Service) (888) RENT-442 (Rental)

KANSAS SELLERS EQUIPMENT www.sellersequipment.com Garden City (620) 275-9621 Olathe (913) 764-2011 Salina (785) 823-6378 Topeka (785) 862-0031 Wichita (316) 943-9311

KENTUCKY

MINNESOTA

DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green (270) 781-1061

ZIEGLER CAT www.ZieglerCAT.com Brainerd (877) 829-9850 Buhl (800) 446-9795 Columbus (866) 982-5656 Crookston (800) 422-5782 Duluth (800) 421-3831 Fergus Falls (800) 346-7649 Jackson (866) 847-6401 Marshall (800) 325-4929 Minneapolis (800) 352-2812

OHIO CAT www.OhioCAT.com Richwood (888) 446-4658 WILSON EQUIPMENT CO. www.wilsonequipment.com Corbin (606) 528-0700 Lexington (859) 254-6443 Prestonburg (606) 874-8036

www.noram65.com

North Mankato (877) 845-3938 Rochester (800) 247-1068 Shakopee (800) 352-2812 St. Cloud (800) 522-9469 Altoona (800) 342-7002 Atlantic (877) 547-3819 Fort Dodge (800) 342-1848 Mason City (800) 342-1849 Postville (800) 526-0889 Sioux City (800) 342-1847

MISSOURI FABICK CAT www.fabickcat.com Fenton (636) 343-5900 Cape Girardeau (573) 332-1122 Columbia (573) 442-6880 Springfield (417) 866-6651 Jefferson City (573) 636-3184 Joplin (417) 624-3010

OHIO OHIO CAT www.OhioCAT.com Broadview Heights (800) 837-6200

Columbus (888) 441-4658 (Sales & Service) (888) RENT-441 (Rental) Perrysburg (888) 339-4658 (Sales & Service) (888) RENT-442 (Rental) Sharonville (888) 332-4658 (Sales & Service) (888) RENT-440 (Rental) Troy (888) 330-4658 Youngstown (800) 837-6203 Cadiz (800) 837-6204 Canton (800) 837-6207 Zanesville (800) 837-6205 N. Canton (888) 736-8443 Oakwood Village (800) 633-1020

Page 54 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TOUGH ENOUGH

to handle the ups and downs.

Challenging jobsites don’t intimidate a Doosan® Moxy ar ticulated dump truck. Its sloping rear frame, free-swinging rear tandem axle and independent front suspension ensure maximum ground contact, excellent weight distribution and solid fo ooting for a big advantage in difficult terrain. Permanent six-wheel drive delivers outstanding traction to pull you through – so you can make full use of its huge load capacit y. Ever y job has its ups and downs. Doosan Moxy keeps you productive no matter what. Contact your local Doosan dealer for more info or m a tio n .

DOOSAN DELIVERS

Performance

Doos an ® is a r e gis t er e d t r ad e m a r k of Doo s a n In f r a c or e Co. o , L t d . in t h e U ni t e d S t a t e s . © 2 0 11 Doo s a n In f r a c or e Cons t r u c tion Equip m e n t A m e ric a . A ll righ t s r e s er v e d. | 0 5112 07

Durability

Comfort

Fuel Efficiency

Easy Maintenance

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 55

Authorized Doosan Dealers

ILLINOIS Luby Equipment Caseyville

Quincy

Springfield

618-397-9971

217-222-5454 www.lubyequipment.com

217-744-2233

Terex Bid-Well Recognizes 50 Years of Business With Kiewit Corporation

INDIANA Ronson Equipment Co, LLC Lowell

šŠŨǍťŨťǍŤťŧş ì ŧťťǍŢŤşǍŤŤŢŧ www.ronsonequipment.com

Walter Payton Power Equipment, LLC Lebanon

Evansville

765-482-4145 812-422-6912 www.wppellc.com

IOWA RTL Equipment, Inc. Grimes

ŤŠŤǍŨŧťǍşšťš ì ŧşşǍŢŦŢǍŢŨŠť www.rtlequipment.com

KANSAS Sellers Equipment, Inc. Wichita 316-943-9311 www.sellersequipment.com

MINNESOTA Lano Equipment, Inc. Shakopee

Anoka

952-445-6310 763-323-1720 877-753-6100 888-448-5266 www.lanoequip.com

MISSOURI Bobcat of St. Louis Columbia 573-886-9435 www.bobcatofnashville.com

Luby Equipment Fenton

Cape Girardeau

636-343-9970

O’Fallon

573-334-9937 636-339-9970 www.lubyequipment.com

(L-R) are Rob Drew, site director, Terex Bid-Well; Dan Kwallek, purchasing agent, purchasing and sales, Kiewit Corporation; Keith Green, equipment purchasing and sales agent, Kiewit Corporation; Steve Filipov, president, developing markets and strategic accounts, Terex Corporation; Keith Sasich, vice president of equipment, Kiewit Corporation; Ron DeFeo, chairman and CEO, Terex Corporation; John Swanson, equipment sales representative, Kiewit Corporation; Joe Krider, vice president, strategic accounts and government affairs, Terex Corporation and Alan Henderson, account director, strategic account group, Terex Corporation.

MICHIGAN Carleton Equipment, Co. Kalamazoo

Livonia

269-343-2943 734-421-9999 888-380-6420 877-451-2326 www.carletonequipment.com

Rex Spencer Equipment, Co. Belton 816-331-6078 www.rexspencer.com

OHIO Gibson Machinery, LLC Oakwood Village

ţţşǍţŢŨǍţşşş ì ŧşşǍŧţŢǍŠšşŤ www.gibsonmachinery.com

SOUTH DAKOTA Healy Machinery Company Sioux Falls

Rapid City

Aberdeen

605-336-0411 605-348-7438 605-725-4364 ŧşşǍţŤťǍţşşŤ ì www.dieselmachinery.com

Fifty years ago, the standard longitudinal bridge paving practice was cumbersome, had many limitations and resulted in marginal ride quality. In 1961, Terex Bid-Well ushered in a new era in bridge paving with a revolutionary machine that paved decks laterally to deliver more flexibility for bridge design and improve surface smoothness. At that time, Omaha, Neb.-based construction company Kiewit Corporation saw the value of this new style of paving. Fifty years later, Kiewit Corporation continues to use Terex Bid-Well pavers to pave the bridges it builds. “It’s been a 50-year relationship marked by good equipment and good support,” said Keith Sasich, vice president of equipment of Kiewit Corporation. “We’ve used Terex BidWell pavers to pave many of our projects and appreciate the company’s ongoing commitment to delivering the highest quality products.” To mark Terex Bid-Well’s 50th anniversary and its first bridge paver sold, Terex Chairman and CEO Ron DeFeo presented representatives from Kiewit a commemorative crystal 3D etching of a paver in appreciation of 50 years of business. “Terex values the long-term partnerships we build with customers such as Kiewit,” said DeFeo. “It is an honor to have Kiewit rely on Terex to provide the equipment solutions that have clearly provided the productivity and delivered the return on investment that they seek for their business.”

On hand from Kiewit to accept the crystal were: Keith Sasich, vice president of Equipment; John Swanson, equipment sales representative; Keith Greene, equipment purchasing and sales agent; and Dan Kwallek, purchasing agent, purchasing and sales equipment department. Accompanying DeFeo from Terex were Steve Filipov, president, developing markets and strategic accounts; Rob Drew, site director for Terex Bid-Well; Alan Henderson, account director–strategic account group; and Joe Krider, vice president of strategic accounts and government affairs. The first Terex Bid-Well paver design in 1961 included an oscillating strike-off pan riding along a 48-in. (122 cm) deep truss frame. It paved bridge deck widths reaching 60-ft. (18 m) and offered improved speed, efficiency and quality over the then-conventional longitudinal paving method. Today, featuring the Rota-Vibe system, Terex Bid-Well bridge pavers are capable of paving widths beyond 200 ft. (61 m). The original 48-in. truss frame has evolved to the current 4800 paver, and 36- and 24-in. (91 and 61 cm) frame depths have been added to the line with the 3600 and 2400 paver models respectively to give contractors more equipment choices for paving bridge decks. The line also includes the Terex Bid-Well 5000 and 6500 highway/airport pavers, the 7000 HD canal paver, concrete placers and placer/spreaders and work bridges. For more information, visit www.terex.com.

Page 56 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 57

Howell Tractor 2770 May Road Peru, IL 61354 800/342-6072 Fax: 815/224-2538 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Mid Country Machinery 3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936 4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710 106 8th Street Sergeant Bluff, IA 51054 712/943-4470

Custom Truck & Equipment www.customtruckandequipment.com 7701 E. 24 Highway Kansas City, MO 64125 800/861-1065 816/241-4888 Fax: 816/241-8826 2121 Stephens Blvd. Joplin, MO 64804 417/659-8969 Fax: 417/659-8871

HISTORY KCMA’s parent company, Kawasaki Heavy Industries, has over 100 years of experience providing technology solutions. Kawasaki Heavy Industries is a global supplier of innovative engineering with a portfolio ranging from jet turbines to bridge design to construction equipment.

TECHNOLOGY Kawasaki is the most experienced manufacturer of articulated wheel loaders in the world. Since introducing our first models in 1962, we have maintained a leadership position in technology, service, and support. Backed by the massive resources of Kawasaki Heavy Industries, KCMA Corporation’s focus on wheel loaders translates into real benefits for you and

your business. Kawasaki articulated wheel loaders incorporate innovative design features coupled with extensive knowledge and experience gained from real-world applications. Kawasaki pioneered Z-Link design to provide unmatched utility, high breakout force and efficiency in its machines.

INNOVATION, Technology in Motion Kawasaki engineers work with end users all over the country to access and review their wheel loader needs. With in-house special application engineers, Kawasaki is capable of responding to new industry demands quickly with comprehensive solutions. Kawasaki operates its own rebuild center. This fully equipped facility is

staffed by skilled technicians with the in-depth knowledge and specialized equipment. Kawasaki provides a totally focused approach to support your business. From carefully designed programs and services to engineered special applications options, your Kawasaki wheel loader is ready to tackle the most demanding applications and environments.

2140 Barrett Park Drive, Suite 101 Kennesaw, Georgia 30144 770-499-7000 www.kawasakiloaders.com

Page 58 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 10351 W. Laraway Rd. Frankfort, IL 60423 815/464-6650

EVERYTHING YOU VALUE

www.kubota.com

HCEA Announces 2011 International Convention, Expo The Historical Construction Equipment Association (HCEA) is holding its 26th Annual International Convention and Old Equipment Exposition at the I & I Tractor Club show grounds in Penfield, Ill., July 8 through 10, 2011. The show features demonstrations and displays of horse-drawn, gas and diesel-powered antique construction machinery, cable and hydraulic shovels and cranes, hit and miss engines, antique trucks and tractors, and displays by the Quonset Air Museum and the Navy Seabees Museum. It is open to the general public, and everyone involved with the construction, mining and dredging equipment is encouraged to attend, so they can observe the ancestors of today’s machinery in action. Show hours are Friday, 9:00 to dusk; Saturday, 9 to 5 p.m.; Sunday, 9 to 3 p.m.. Admission per person 12 or over is $10.00 daily or $25.00 for a weekend pass. Along with demonstrations of antique construction machinery, the show also will include I & I’s tractor pull, sawmill, museum, Fairbanks engine, blacksmithing demonstration, and other attractions. The HCEA will have a tent for indoor vendors, and outdoor vendor, flea market and swap meet The Historical Construction Equipment Association (HCEA) is holding its 26th Annual International Convention and Old spaces are available through I & I. People movers Equipment Exposition. will be available and golf carts can be rented on a Fall Festival Center, 101 South Main Street in nearby cob, salad, rolls, beverage and dessert. Price for the banquet first-come/first served basis. Gifford, and will include an auction and raffle. Banquet is $30.00 per person. The Saturday evening banquet will be held at the German menu includes steak or chicken, baked potato, corn on the For more information, visit www.hcea.net.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 59

MUSCLE

MIGHTY

TOP NOTCH EQUIPMENT 5505 N. HWY. 169 PLYMOUTH, MN 55442 (888) 824-6559 www.topnotchequipment.com

STAR EQUIPMENT LTD. 1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215

IRLINE HWY. 2625 W. A Dealer Imprint

WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249

2950 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139

mustangmfg.com

2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312

Page 60 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Unveils 512-56 Loadall Telescopic Handler — Its Largest, Strongest Model JCB has introduced its largest and strongest telescopic handler to date — the 512-56. According to John Patterson, deputy chairman of JCB, the 512-56 is the largest machine in the company’s range of telescopic handlers and meets a growing trend towards larger machines. “The 512-56 caps off our line of five high-boom, lift-andplace Loadalls with capacities ranging from 6,000 to 12,000 pounds,” Patterson said. “With this new high-capacity, highlifting machine, we’re entering an important, growing sector of the market.” The 512-56 telescopic handlers can elevate a maximum load of 12,000 lbs. (5,443 kg) with a maximum lift height of 56 ft. (17 m). The machine is equipped with axle-mounted stabilizers as standard for chassis leveling when the stabilizer legs are down, enabling it to lift massive loads without sacrificing safety. Its combination of power and lifting height make it ideal for lifting and placing heavy items at construction and industrial sites, according to the manufacturer. Versatile High-Boom Design The 512-56’s boom is positioned high for optimum operator visibility when working or traveling. A hydraulic cylinder mounted underneath the outer boom extends the boom’s intermediate section, with chains for second and third stages. This “top-hat” boom design uses a Waxoyl lubricant exclusive to JCB. Because the Waxoyl lubricant is dry to the touch, it does not attract sand or dirt that could potentially increase boom pad wear. The boom’s quick-hitch enables operators to use a wide variety of attachments on the 512-56, further enhancing its versatility and productivity. Side-Mounted JCB Tier III Dieselmax Engine With a side-mounted, 114 hp (85 kW) version of JCB’s EPA and CARB-compliant Tier III Dieselmax Engine, the 512-56 has power to spare. The engine’s high level of torque delivers enhanced tractive effort in soft ground conditions. A standard four-speed JCB powershift trans-

The 512-56 is the largest machine in the company’s range of telescopic handlers.

mission provides effortless gear changes while the machine is on the move. Mounted at a 90-degree angle to the machine’s frame, the engine is easily accessible for servicing and maintenance. Also featured on JCB’s low-boom telescopic handlers, this side-mounted engine creates a high level of parts commonality that allows dealers and operators of multiple-machine fleets to maintain fewer parts in inventory. Heavy-Duty JCB Axles The 512-56 features JCB axles with torque-proportioning differentials as standard equipment. Heavy-axle shafts and outboard planetary hubs offer long service life and reduce repair and maintenance costs over the life of the machine. Service brakes are self-adjusting oil-immersed discs that require no maintenance. Comfort and Safety Operators can comfortably and safely enter and exit the 512-56’s lower-mounted, spacious cab. Inside the ergonomically-designed cab, a large right-hand cluster provides at-aglance reading of the machine’s instrument display. The cab’s easy-to-operate plus-pattern servo hydraulic control lever features proportional and flow-share capability for precise control with fast cycle times. Outside the cab, operators can choose from several tire options — air-filled, eco ballast, puncture sealant and foamfilled. In this way, operators can ensure that the 512-56’s tires will meet the demands of the terrain present at their individual job sites. For more information, call 912/447-2000 or visit www.jcbna.com.

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586/727-7502 Fax: 586/727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

ROAD MACHINERY & SUPPLIES COMPANY www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY

ROAD BUILDERS MACHINERY & SUPPLY CO., INC.

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax South Bend, IN 574/233-8770 574/233-8775 Fax

1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ May 28, 2011 â&#x20AC;¢ Page 61

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 800/252-2926 Bolingbrook, IL 630/739-7474 800/826-9608 Carterville, IL 618/985-3399 800/274-7202 Marengo, IL 815/923-4966 800/765-2635 Portage, IN 219/764-8080 888/764-8226 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 800/274-7230 Cape Girardeau, MO 573/334-5252 800/274-7210 Columbia, MO 573/814-0083 800/274-7212 Palmyra, MO 573/769-2056 800/274-7214 DePere, WI 920/532-0526 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479 2300 Vermont Avenue Bismarck ND 58504 800/279-4437

DOZERS From Komatsu â&#x20AC;&#x201C; The Dozer Experts

0VS % % % BOE % %P[FST HJWF ZPV UIF SFMJBCJMJUZ BOE WFSTBUJMJUZ ZPV FYQFDU GSPN UIF EP[FS FYQFSUT BU ,PNBTUV 5IFTF BOE IPSTFQPXFS NBDIJOFT IBWF UIF GFBUVSFT ZPV OFFE UP DPNQMFUF ZPVS KPCT PO UJNF BOE PO CVEHFU t )ZESPTUBUJD 5SBOTNJTTJPO )45 GPS TVQFSC BDDVSBDZ BOE TNPPUI DPOUSPM t &YDFMMFOU CMBEF WJTJCJMJUZ UIBU NJOJNJ[FT PQFSBUPS HVFTTXPSL BOE SFEVDFT DZDMF UJNFT t "MM EBJMZ NBJOUFOBODF QPJOUT DFOUSBMJ[FE JO POF MPDBUJPO GPS DPOWFOJFOU BDDFTT

XXX LPNBUTVBNFSJDB DPN XXX LPNBUTVBNFSJDB DPN

Page 62 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cool Heads Prevail With Ventilated Safety Helmet

The serpent shell is made of a high-density polyethylene material that provides impact protection without adding weight.

Diamond Equipment Inc. 1060 E. Diamond Ave. 1046 Lovers Lane Evansville, Indiana 47711 Bowling Green, KY 42103 (812) 425-4428 (270) 781-1061 (800) 258-4428 (800) 489-1061 Fax: (812) 421-1036 Fax: (270) 781-0907 www.diamondequipment.com

2000 Harlan Drive Terre Haute, IN 47802 (812) 299-4747 (888) 343-4747 Fax: (812) 299-3687 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 (618) 242-2273 (800) 388-6396 Fax: (618) 242-9161

1530 Heil Quaker Blvd. Nashville, TN 37086 (615) 641-1100 (800) 635-9454 Fax: (615) 641-1108

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 (816) 241-9290 (816) 241-1738 www.vlpco.com Joplin, MO (800) 878-8223 (417) 781-8222 Springfield, MO (800) 955-2729 (417) 887-2729

Wichita, KS (800) 878-3346 (316) 838-3346 Topeka, KS (800) 878-4345 (785) 267-4345 Garden City, KS (800) 511-1435 (620) 275-1996

For workers who dread wearing uncomfortable, hot safety helmets on the job site, extra comfort features can make the difference. Gateway Safety’s serpent ventilated safety helmet offers all-day comfort, light weight and excellent ventilation combined with optimal head injury protection, according to the manufacturer. Serpent is ultra light at just 13.1 oz., with a six-point nylon suspension system. A rotating ratchet adjustment easily fits over the nape of the neck for a comfortable, secure fit. And because heat buildup under the helmet can cause fatigue and heat stress, ventilated Serpent is an ideal choice. Its CoolSense airflow system, along with six vents along the peak of the helmet, promotes heat release and keeps workers cool. Additional features

include a cushioned brow pad that absorbs moisture and perspiration and a rain trough to divert water from workers’ faces. The serpent shell is made of a high-density polyethylene material that provides impact protection without adding weight. Gateway Safety’s serpent complies with the ANSI Z89.1 standard for type I, class C helmets. About Gateway Safety Inc. For more than 65 years, Gateway Safety has been designing and manufacturing safety products in eye, face, head, hearing and respiratory protection. For more information, call 800/8225347 or visit www.GatewaySafety.com/PR.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 63

Faster cycles. Higher productivity Don’t be fooled by imitators. Thirty-plus years’ experience building the best hydrostatic dozers makes John Deere the brand for you. Innovations, like Total Machine Control (TMC), allow operators to customize machine response and operation to their personal preferences. J-Series Dozers deliver unsurpassed productivity and uptime, along with the lowest possible daily operating costs. And that’ just for starters. To learn all about John Deere J-Series Dozers, give us a call.

www.holtequipment.net

www.jdeequip.com

Louisville, KY 40223 502/253-3721 1-800/507-9705 London, KY 606/862-8447 1-877/231-7151 Bowling Green, KY 42101 270/842-3400 1-866/528-9699 Richmond, KY 859/623-2030 1-800/463-8722

651 AIS Drive S.W. Grand Rapids, MI 49548 616/530-2000 1-800/664-3303 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121 Traverse City 777 US 31S Traverse City, MI 49684 231/943-3996 1-800/968-1110

WEST SIDE TRACTOR SALES CO. Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Rockdale, IL 60436 815/730-9011 765/447-6933 1-800/937-3355 Fax: 815/730-9036 Rockford, IL 60012 815/961-3160 Fax: 815/965-1810 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Indianapolis, IN 46219 317/544-3411 Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038 Bloomington, IN 47403 812/333-9677 Fax: 812/333-9731 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324 Fort Wayne, IN 46825 260/482-8576 Fax: 260/483-4057

MURPHY TRACTOR & EQUIPMENT CO. 1800 South West St. Wichita, KS 67217 800/262-0139 Dodge City, KS 800/794-0172 Great Bend, KS 800/264-4056 Topeka, KS 800/279-6087 Ulysses, KS 800/472-9238 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656 Gering, NE 800/205-6784

North Platte, NE 800/894-7060 Grand Island, NE 800/868-4017 Lincoln, NE 800/416-5518 Omaha, NE 800/416-5095 Waterloo, IA 800/772-2019 Des Moines, IA 800/822-2212 Fort Dodge, IA 800/362-2487 Sioux City, IA 800/352-4693 Columbus, OH 800/222-2010

Cincinnati, OH 800/844-3734 Vandalia (Dayton), OH 800/233-4228 Lima, OH 800/423-7445 Canton, OH 866/235-0438 Brunswick, OH 800/716-9796 Painesville, OH 866/800-1395 Poland (Youngstown), OH 330/629-6299 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500

Page 64 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby Smith Machinery Inc. 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700

6715 W. Reno Oklahoma City, OK 73127 405/495-7820 Kansas City, KS 913/850-6300 877/851-5729

Cleveland Crane & Shovel Sales, Inc. 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 2126 Glenview Drive Evansville, IN 47720 812/422-6912 Fax: 812/422-6982

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 65

Page 66 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Leica’s Builder Series Total Stations Consists of Five Models Leica Geosystems’ Leica Builder Series Total Stations is designed for construction contractors or anyone on a construction site requiring an easy-to-operate, full-feature measuring tool. From simple tasks to professional all-day use, the Leica Builder offers a scaled product family of five different models to meet the varying needs of most construction jobs. Contractors can choose from the 100-, 200-, 300-, 400-, or 500-series models. The Leica Builder Series is designed for non-technical construction professional to easily perform positioning, layout or dozens of other daily construction-site tasks. To facilitate data transfer, some models feature a USB port while the 500 series also has Bluetooth functionality. The Leica Builder Series offers the choice of two operation modes. Contractors can operate in “stand-alone” mode via the on-board PowerSite construction programs with the memory capabilities to collect, store and download data. Or there is an application available for contractors who prefer to use a data collector. The builder can be coupled with the Leica DX-10 data collector and Siteforeman software. On-board PowerSite software is designed specifically for construction applications, eliminating surveying fea-

tures that contractors may not need. Contractors do not require a surveying background in order to use the PowerSite software. Intended for the construction site, the Leica Builder is designed to withstand dust, water and other environmental conditions with an IP55 rating. The entry model Leica Builder 100-series is an electronic digital theodolite for horizontal and vertical angle measurements. Subsequent models, Leica Builder 200, 300, 400 and 500, are total stations available with reflectorless and/or prism measurement capabilities, data storage via USB memory stick and wireless communication for more useful functionality. All instruments are equipped with theft protection and support many different languages of which three can be uploaded and switched at the push of a button. The Leica Builder is delivered packaged in a handy, crush-proof transport case with a set of accessories for out-of-thebox use. For more information visit www.leicageosystems.us.

RTV900XT Boasts New Variable Hydro Transmission Plus2 Kubota Tractor Corporation’s latest version of its RTV900 workhorse utility vehicle model is the RTV900XT. Building on Kubota’s diesel-powered RTV900, this model’s key new feature is the variable hydro transmission (VHT) Plus2, boasting higher torque to maximize towing and hauling performance, along with smooth dynamic-braking and easier shifting. The Kubota RTV900XT marks an important evolutionary step for our popular RTV900 line. We successfully entered and grew the utility vehicle market in 2004 with the original RTV900 and its unique diesel engine and hydraulic transmission combination; and we are continually looking for ways to bring additional value and satisfaction to this platform. The RTV900XT delivers on that goal with tangible improvements to quality, durability, and overall worksite performance,” said Dan Muramoto, utility vehicle product manager of Kubota. “From homeowners to contractors, we have

always recognized that utility vehicle owners are a diverse group, and the introduction of this enhanced workhorse model furthers our goal to satisfy the varying needs of our RTV owners.” The Power of Diesel and Hydraulics The RTV900XT runs on a 21.6 gross hp (16 kW), three-cylinder, liquid-cooled Kubota diesel engine, that is performancematched to the Kubota VHT Plus2 hydrostatic transmission. With an extra-large steel cargo bed and an optional hydraulic bed-lift system, the RTV900XT makes hauling and dumping easy with the simple operation of a single lever. The front of the machine features a new reinforced gunmetal gray steel front guard for extra protection and durability. The responsive hydrostatic power steering makes for enhanced comfort, control and maneuverability, and a new seat design provides increased comfort for the operator and passenger.

The Complete Kubota RTV Family With the introduction of the RTV900XT, the Kubota RTV family continues to include four different models, each of which offers an extensive list of optional accessories and implements and come in Kubota orange or Realtree Hardwoods Camouflage. The Kubota utility vehicle line-up includes: • Kubota’s RTV500 is a 15.8-hp (11.8 kW) utility vehicle that fits into the bed of a full-sized pickup truck. The RTV500 is Kubota’s first gas-powered utility vehicle. • The Kubota RTV900XT is built on the same RTV900 platform and features a variable hydro transmission (VHT) Plus2 for high torque and maximum hauling and towing capabilities. • The RTV1100 offers an airconditioned factory-installed cab as standard equipment for allweather protection and comfort. Kubota equips all RTV1100 models with sliding glass windows in the doors.

Kubota adds to it utility vehicle lineup with the RTV900XT.

• The RTV1140CPX features a transformation system that converts from one- to two- row seating options. This feature allows the operator to choose between additional passenger capacity and spacious 18.4 cu.-ft. (.5 cu m) cargo space, depending on the task at hand. Comfort and Safety Each model in the Kubota RTV series is designed to ensure operator comfort and safety, according

to the manufacturer. The bench seats are roomy and comfortable, the dash layout is simple and intuitive, and the flat floor provides unobstructed legroom. Regardless of model, operators can ride assured that the integrated roll-over protective structure is designed for optimal safety while meeting OSHA and SAE rollover protection standards. For more information, call 888/458-2682 or visit www.kubota.com.

Trucks & Trailers

SECTION

Pages 67-76

Mack Introduces Enhancements to Vocational Truck Lineup Mack Trucks Inc. has introduced a series of enhancements to its MackGranite conventional straight trucks and the heavy-haul Titan by Mack model. The Granite medium-heavy duty (MHD) is designed to meet the needs of customers, like some municipalities, who don’t put their trucks through all the rigors Granite models can handle — customers for whom a lighter spec gets the job done. “In the current economic environment, companies are taking an even harder look at how much truck they truly need,” said Curtis Dorwart, Mack vocational products marketing manager. “Our new Granite mediumheavy duty delivers just the right amount of Mack’s legendary strength, durability and reliability, along with valuable weight and cost savings.” The Granite MHD is available in both axle-forward and axle-back configurations, is powered by a Cummins ISL9 EPA 2010certified engine and is offered with an Eaton manual or Allison automatic transmission. Both Mack’s Granite axle- forward and Granite axle- back models can now be ordered with a 36-in. flat-top sleeper equipped with a 30 by 80-in. mattress, curtain, bunk restraint, under bunk storage and cup holder — as well as rear and side window options. “We’ve seen a considerable increase in the number of vocational customers expanding their operations beyond regional sites,” Dorwart said. “The new Mack Granite sleeper is ideal for customers in any market working to meet the federal hours-of-service requirements.” Further enhancements to the Mack Granite series include a new headliner console, optional one-piece windshield, and updated Champion Level trim package with button-tuck vinyl and ultraleather seats that delivers the comfort and styling drivers desire at no extra charge over its predecessor. The new Champion Level trim package and one-piece windshield also are available in the Titan by Mack model. A cab-mounted exhaust option available in all Granite models and a clear back-of-cab assist Mack body builder partners. Customers also now have a new Allison

The Granite medium-heavy duty (MHD) is designed to meet the needs of customers who don’t put their trucks through all the rigors Granite models can handle.

automatic transmission option — the 3000 series — for the Granite model. “In recent years, the trucking industry has been hit hard by the worst recession since the Great Depression, but Mack never stopped investing and innovating — it’s what our customers expect,” said Kevin Flaherty, Mack senior vice president, United States and Canada. For more information, visit www.macktrucks.com.

Both Mack’s Granite axle forward and Granite axle back models can now be ordered with a 36-in. flat-top sleeper equipped with a 30 by 80-in. mattress, curtain, bunk restraint, under bunk storage and cup holder — as well as rear and side window options.

Page 68 • May 28, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Cat 775G Off-Road Truck Meets Tough Emissions Standards

A combination of new drive train strategies and a five percent power increase over the previous model enable the 70-ton (63.5 t) payload class truck to hold a higher gear when climbing 10 percent grades in most applications.

The Cat 775G off-highway truck sets new performance standards for the model while meeting U.S. EPA Tier IV final emissions standards. A combination of new drive train strategies and a five percent power increase over the previous model enable the 70-ton (63.5 t) payload class truck to hold a higher gear when climbing 10 percent grades in most applications. A number of new components and control changes boost efficiency. A key is the next generation of Cat transmission controls, named advanced productivity electronic control strategy. The system enhances productivity, fuel efficiency and drive train durability, and it enables enhanced machine control. For example, to balance fuel savings and production, two different economy shift mode selections enable the customer to tailor performance to the needs of the business, according to the manufacturer. Advanced control systems also integrate the optional engine compression brake with automatic retarder control to enable faster

downhill travel and reduced cycle times ― without increased fuel consumption. To meet Tier IV final emissions regulations in the United States, the Cat C27 ACERT engine includes the Cat NOx reduction system and diesel oxidation catalyst. Working in combination with ACERT technology, the Cat NOx-reduction system continually diverts and cools a small volume of the engine exhaust gases, then returns the cooled gases to the combustion chamber. This process reduces cylinder temperatures and, consequently, lowers NOx formation. The no-maintenance diesel oxidation catalyst reduces certain hydrocarbons in the exhaust. The system requires the use of ultra low sulfur diesel fuel and does not use a diesel particulate filter. In the European Union and other areas, the 775G will be configured to meet EU Stage II emissions standards, which is the EU regulation applicable to the power output of the engine. The 775G engine produces net power of

779 hp (581 kW), and target gross weight of the truck is 246,500 lbs. (111,811 kg). As with the previous model, a number of different body options enable a customer to configure a truck to achieve optimum capacity and durability. The 775G will replace the 775F when it goes into commercial production in the fourth quarter of 2011. Designs to Help Operators, Maintenance Techs The 775G also features a new cab and other changes to help the operator do the job safely and efficiently. The operator seat is in the center of the cab, which provides more space for the operator, and the cab has access and egress from either side. The access system is equipped with stairs illuminated by LED lights. The new cab provides a 4 dbA reduction in noise experienced by the operator, which helps the operator fight fatigue over a long work period. The left window is electrically

powered for convenience, and the cab heating and cooling feature automatic temperature control. An enhanced cab pre-cleaner is available as an option to further increase air quality and extend the lives of HVAC components. For easy access by maintenance technicians, the 775G has a ground level electrical service center and diagnostics port on the front bumper. The Cat VIMS data collection system now is standard equipment on the 775G. It allows the customer to access prognostic and diagnostic information. The optional VIMS service light on the front of the truck will indicate any machine event that affects performance. Fluid level indication and fluid fill ports are grouped for efficient service, and fluid filters are grouped. Filter service intervals for steering, hoist/brake and transmission/torque converter have been increased from 500 to 1,000 hours. For more information, visit www.cat.com.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2011 • Page 69

Scharber & Sons, Inc. www.westsidetractorsales.com 2170 South Yost Ave. 1400 W. Ogden Ave. Bloomington, IN 47403 Naperville, IL 812-333-9677 630-355-7150 Fax: 812-333-9731 310 W. 162 St. Rt. 6 5400 Industrial Rd. South Holland, IL Fort Wayne, IN 46825 708-331-6362 260-482-8576 Fax: 260-483-4057 3110 Prairie Rd. 7355 East 30th St. Rockford, IL Indianapolis, IN 46219 815-961-3160 317-544-3411 1560 North Old Rand Rd. Lafayette, IN 47905 Wauconda, IL 765-477-6933 847-526-7700 Fax: 765-448-9038 600 Walnut Ct Rockdale, IL 815-730-9011

South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

949 3rd Ave. Windom, MN 56101 507-678-2752

Ditch Witch of North Dakota 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949 3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

Kentucky 13090 Aiken Rd. Louisville, KY 40223 800-507-9705

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

4233 Russellville Rd. Bowling Green, KY 42101 866-528-9699 140 James Lewis Rd. London, KY 40744 877-231-7151 3279 Lexington Rd. Richmond, KY 40475 800-463-8722 www.holtequipment.net

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399 901 Parker Ave. W. Dassel, MN 55325 877-570-2740 www.farmriteequip.com

2216 N. Greenbay Rd. Waukegan, IL 60087 847-336-1205 10351 W. Laraway Rd. Frankfort, IL 60423 815-464-6650 27939 W. Concrete Dr. Ingleside IL 60041 815-363-4100 www.burrisequipment.com

Page 70 • May 28, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2011 • Page 71

2939 Hwy. 10 South • St. Cloud, MN

320-529-4040 WE SHIP ANYWHERE MANY TEXAS TRUCKS!

1997 Ford F450 Flatbed, 7.3 Powerstroke Dsl, auto, 2wd, rust free clean truck, only 86k miles for $8,950

2008 Ford F350 4x4 Reg Cab Utility Truck, 6.4 Powerstroke Diesel, Auto, 66K Miles, Exc. Condition $26,500

2000 Ford F450 Fuel and Lube Truck, 7.3 Diesel, Auto, 2WD, Only 78K Miles Rust Free for $19,500

2004 Ford F250 Ext Cab 4x4, Long Box, V8, auto, with 89K miles for only $13,950

1999 Ford F350 Crew Cab 4x4, V10, auto, long box, with 100K miles, nice truck for only $11,950

1994 International 4800, 4X4, DT 466, allison auto,very hard to find, rust free 75K miles for $29,500

1999 Ford F550, 4X4, Flatbed, V10, auto, clean truck with only 92K miles for $14,950

1999 Ford F350 Dump Truck, 7.3 Powerstroke Diesel, auto, 2wd, with only 128K miles for $12,950

2001 Ford F450 utility truck, 7.3 Diesel, auto, 2wd, rust free clean truck, with only 46K miles for $15,950

2006 Ford F550 4x4 reg cab, 6.0 Powerstroke Dsl, auto, utility, extra clean truck w/only 82K miles for $24,900

1999 Ford F450 Flat bed dump 7.3 diesel, auto, 2wd, 100K miles rust free for $15,950

1999 Ford F550 2wd, flat bed, 7.3 Diesel, auto, very clean truck w/only 101K miles for $13,950

2003 Ford F450 Dump truck, Diesel, auto, 2wd, fold down sides, with only 59K miles for $22,950

1997 Ford F450 Reg Cab Uility, 7.3 Powerstroke Diesel, 2WD, Auto, Rust Free, Hard to Find only 39K Miles for $10,950

2003 Ford F350 4x4 Dump Truck, V10, Auto, Fold Down Sides, Rust Free Clean, with only 73K Miles for $19,500

2001 Ford F450 Crew Cab Utility Truck w/Welder Platform, 2WD 7.3 Dsl, Auto, Rust Free, Only 87K Miles for $14,950

2000 Ford F450 bucket truck w/telsta boom, V10, auto, extra clean truck w/128K miles for $14,950

1989 Ford F450 Dump Truck, 460 V8, auto, rust free clean truck with only 21K miles for $9,950

2000 Ford F450 Utility Truck, 7.3 Diesel, Auto, 2WD, Extra Clean, Only 93K Miles for $14,950

1997 GMC 3500HD mechanics truck with crane, 6.5 Diesel, auto, rust free, 107K miles for $12,950

2008 Ford F350 4X4, ext cab, flat bed, V10 auto, nice truck with 91K miles for $22,950

2000 Chev 2500 4x4 Ext Cab, 6.0 V8, Auto, Nice Rust Free Truck w/Only 49K Miles for $13,950

1999 Ford F450 4X4, Crew Cab, V10, auto, 113K Miles for $11,950

2003 Ford F450 4x4, diesel, 6spd, utility, nice truck w/very low miles for $19,500

2008 Ford F250 Ext Cab 4X4, V8, auto, pw, pd, a/c, long box, with 76K miles for $18,950

2003 Ford F450 utility service truck, reg cab, 4X4, diesel, auto, 117K miles for $15,950

2008 Ford F250 Ext Cab, XLT, 4x4, 6.4 Powerstroke Diesel, Long Box, Auto, 94K Miles $22,950

FIFTY + COMMERCIAL 2001 International 4800 4X4 Crew Cab fire truck, DT 466, allison auto, 42K miles Very hard to find.

2008 Ford F250 Crew Cab 4x4, 5.4 V8, Auto, Long Box, 99K Miles for Only $19,950

TRUCKS ONSITE

WWW.NORTHSTARTRUCKSALES.COM

Page 72 • May 28, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Kenworth Adds Front Frame Brackets for Winch Bumper Kenworth Truck Company will add durable, factoryinstalled, front frame brackets for easy winch bumper installation on Kenworth T270 and T370 trucks. The Kenworth front frame bracket package will provide strength for downward loads as great as 8,500 lbs. (3,855 kg) for a boom rest or cab guard, and up to 16,000 lbs. (7,257 kg) in the upward direction for outriggers. This frame package can help reduce customer upfit cost, and is compatible with popular bumpers used by winch customers. “Kenworth’s new front frame bracket package especially targets utility and municipal customers that choose to operate Kenworth medium duty winch trucks,” said Doug Powell, Kenworth medium duty marketing manager. “With this product addition, we’ve standardized and simplified the installation of specialty bumpers commonly used in the fire and emergency vehicle markets. This package will further enhance the value of our T270 and T370 4x4 models introduced in 2010.”

Kenworth will add durable, factory-installed, front frame brackets for easy winch bumper installation on Kenworth T270 and T370 trucks.

DuraClass Unveils New Sidewinder Jr. Dump Body DuraClass recently introduced the Sidewinder Jr. dump body for standard dump use, as well as winter snow and ice control. The 3 to 4 yd. (2.7 to 3.6 m) Sidewinder Jr. is designed for medium duty truck applications and complements the larger 5 to 14 yd. (4.6 to 12.8 m) capacity DuraClass Sidewinder dump body. With its compact size, the Sidewinder Jr. increases maneuverability on narrow roads and in metropolitan areas, while minimizing clearance concerns, according to the manufacturer. The versatile body is easily prepared for unexpected early or late snowfalls and can be used for mid-winter construction events, such as water main breaks, without having to remove sanding equipment. The Sidewinder Jr. delivers salt/sand to the front of the truck’s tires through a conveyor system, providing added traction for traveling up and down hilly terrain. The unit’s low profile allows for safe traveling in minimum clearance areas such as under power lines, areas with low tree branches or under bridges. DuraClass designs and manufactures a wide range of premium Class 3 to 8 dump bodies, hoists and related equipment.

The Sidewinder Jr. delivers salt/sand to the front of the truck’s tires through a conveyor system, providing added traction for traveling up and down hilly terrain.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2011 • Page 73

CUSTOM BUILT MIDLAND DUMPBODIES & TRAILERS

Mailhot and Custom Telescopic Hoists

Custom Welding & Fabrication – We Repair All Competitor Boxes

•

Watson Chalin & Ridewell Pusher & Tag Axles Toolboxes Strobes & Vibrators Custom Contractor & Tree Bodies PullTarp & Roll-Rite Tarp Systems Replacement Dump Bodies & Tailgates Bibeau Dump Bodies Tafco Platform & Contractors Bodies Bonnell Sanders & Snow Plows Wet Kits Cab Guards HTC – Hydraulic Truck Conveyors Frame Stretching

•

21980 KENRICK AVE. • LAKEVILLE, MN 55044 PHONE: (952) 469-1006 FAX: (952) 469-1152 WWW.MIDLANDEQUIPMENTCO.COM

Find it at...

John Adamich’s Dodge of Burnsville

12101 HWY 35W • S. Burnsville, MN 55337

952-894-9000 jgerber@dodgeofburnsville.com “You’ll Notice the Difference”

Please Call For Prices

Page 74 â&#x20AC;¢ May 28, 2011 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ Trucks & Trailers Section â&#x20AC;¢ Construction Equipment Guide

WITH LANDOLLâ&#x20AC;&#x2122;S HIGH END FEATURES 6WHHO 6KRW %ODVWHG Â&#x2021; 3RZGHU &RDW 3DLQW Â&#x2021; <HDU 6WUXFWXUDO :DUUDQW\ *URWH +DUQHVV /(' /LJKWV <HDU :DUUDQW\ Â&#x2021; &HQWUDO *UHDVH 6\VWHP

'HWDFKDEOH H *RRVHQHFN 7R 7RQ $[OH 7R 7RQ $[OH

0RGHO

ORZER\ WUDLOHUV 7KH 6HULHV KDV WWZ ZR SULPDUU\\ PRGHOV 7KH LV D WRQ ZLWK WWZ ZR RU WKUHH D[OHV WKH LV D WRQ ZLWK WKUHH RU IRXU D[OHV 'HFN KHLJKWV GRZQ WR Â´ DQG GHFN OHQJWKV XS WR Â¶ JLYH WRGD\Â¶V KDXOHU WWZ ZR DOO LPSRUUWWDQW IHDWXUHV 7KH VHULHV KDXOV WKDW WDOOHU ZLGHU KHDYLHU ORDG ZLWK HDVH <HV ORZHU \RXU ERRP EXFNHW RU FDE <HV ORZHU \RXU ERRP EXFNHW RU FDE 7DNH D VHULRXV ORRN DQG \RX ZLOO Â¿QG KLJK TXDOLW\ FUDIIWWVPDQVKLS ZLWK D SURGXFW WKDW LV ORDGHG ZLWK VWDQGDUG IHDWXUHV %XLOW ZLWK \HDUV RI PDQXIDFWXULQJ H[SHULHQFH WKH 'HWDFK 6HULHV LV EDFNHG E\ D Â¿YH \HDU IDFWRUU\ \ ZDUUDQW\ SDFNDJH &$// 72'$<Â«

Â&#x2021; Z Â&#x2021; ZZ Z Z OD ODQGR QGROOO F O F RP

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2011 • Page 75

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Big Rock 47W247 US Highway 30 Big Rock, IL 60511 630-556-3111 • Fax: 630-556-3749 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

St. Joseph Equipment, Inc.

Vermeer Sales & Service 1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

Midwest Trailers Plus, Inc.

Farm-Rite Equipment Inc.

548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com

K.C. Bobcat 2209 W. 40 Highway Blue Springs, MO 64015 800-697-4228 816-229-7631 Olathe, KS 800-598-4228 Platte City, MD 800-984-3001

Shakopee Division 6340 Hwy 101 Shakopee, MN 55379 952-445-5400 • 800-795-9274 Fax: 952-445-0365 Duluth Division 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 • 800-795-0117 Fax: 218-727-2827 Elk River Division 16200 Hwy 10 Elk River, MN 55330 763-262-4474 • Fax: 763-262-4251 Rochester Division #81, 3584 18th Ave. NW Rochester, MN 55901 507-288-3402 Industrial Division N1626 Wuensch Rd. LaCrosse, WI 54601 608-788-1025 • 800-780-1025 Fax: 608-788-1027 www.stjosephequipiment.com

Page 76 • May 28, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

$ummer $avings #1

#1Corp. Chrysler Commercial Dealer in Commercial Dealer inMinnesota Minnesota

NEW 2010 RAM 3500 SLT 4X4 PICKUP

FURY MOTORS South St. Paul, Minnesota Dick Reineck 651.251.8214 direct

rreineck@furymotors.com

*SALE PRICES REFLECT ALL COMMERCIAL REBATES AVAILABLE DEDUCTED AT TIME OF AD PLACEMENT.

2011 RAM 3500

2011 RAM 3500 CAB & CHASSIS CREW HAULER

2011 RAM 4500

V/8 “HEMI” Cab & Chassis, 9’ 6 Crysteel Dump and Tool Box and Pull Pck, 4x4, PW, PL, TC, Auto Trans, HD Tow and Sno Package Stk# L0000

SLT PCK, PW, PL, TC, PSEAT, Max Tow, Alum Hauler w/Class V Hitch & Fifth Wheel, H/O Cummins, 4x4 Stk# L0002

Cab & Chassis, Alum 9’ Dump & Stainless Tool Box, Max Tow PCK, HD SNO PCK, PW, PL, TC, PTO, 4x4 Auto Trans, H/O Cummins Stk# L0205

Was $43,919

Was $60,750

Was $57,510

$avings $ale $34,466

$avings $ale $49,711

$avings $ale $47,411 . /, , -%$"

! " #$"%& ""

''' (

) *+

PW, PL, TC, AC, Auto Trans, P Seat, H/O Cummins with Max Tow and More! Stk# K1098

Was $51,830

$avings $ale $40,917

2011 DODGE GRAND CARAVAN CARGO

$avings $ale

2011 RAM 2500

4x8 Flat Floor, PW, TC, PL HD Cooling, Auto Trans Stk# L0495

Crew 4x4 “HEMI” PW, PL, TC, AC, Trailer PCK, SNO PCK Stk# L0108

Was $23,100

Was $38,250

2011 RAM 3500 “LONGHORN” This one’s got everything!!! Leather, NAV, MAX TOW, H/O Cummins, Auto Trans Loaded to the Max! Stk# L0759

Was $59,940

$avings $ale $20,802

$avings $ale $30,987

$avings $ale $49,329

Titan Trailer Mfg.

Construction Utility Trailers Skidsteer Bumper Trailer CCA Treatment Floor 83" Between Fenders

, +

Construction Utility Bumper Trailer 18' UT Double Framed Stand-Up and/or Slide-In Ramps

!" !"# $%&$$'( %) *+,' (%&#-' .$+ / 01!"12"( !/ *+, 1%3 ,#!$%' 01!"12"(

“PICK OF THE LITTER” 89 RAM 1500’s, 9 RAM 2500’s, 10 RAM 3500’S 14 Cab & Chassis

• Landscaping • Construction • Cars & Trucks • Skid Loaders Straight Neck

44/ 56 44 $%' 1,17!#3 4 8 9 : ;< : (7= $%/ .$*%) (1.!%& 3).1*"!7 (#17- (7= ,!#$%& $$) "$$. *#.!&&(.'> $$" $8 !./ !)(

82"x16' Dump Trailer

Ruff Neck

Contact Dealer Nearest You

Toll-Free: 866-294-4514 • www.titantrailer.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 77

Page 78 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2011 EZ Screen 550, Works with 1 Yard Loader or 96” Bucket, Excellent 5’x4’ Vibratory Screenbox! Ideal for site cleanups. One man = 50 yards a day+. Talk to the folks that own them. 2 Year warranty. This will be the fastest payback of ANY machine you’ve ever bought. . . . . . . . . . . . . . . . . . . . . . NEW $9,500 plus freight. Other Screens Available www.ez-screen.com • 866-745-5828 11 EB

2007 Mustang ME3003 - Mini Excavator, with long arm and 16" bucket, 36 HP, 112 Hrs, Full warranty .................................................$23,700 Top Notch Equipment 612/290-0640 10-11 PK

2003 John Deere 320 Skid, Cab, Heat, qt, 72" bucket, 1365 Hrs, 66 HP, s/n T00320A101325 ... ................................................................$18,500 10-11 PK 763/444-8873

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 10-11 PK 763/444-8873

2007 Case 850K, s/n CAL005866, 1887 Hrs, Cab w/Heat & Air, 24” Pads, 120” Blade 6-Way, Cold Start, Canopy Brush Rops ............$89,000 11-12 JM Call Mark at 630-739-7770

2006 Case CX290, s/n DAC291347, 2480 Hrs, Standard Boom, 10’6” Arm, Pattern Selector Valve, Coupler ......................................$140,000 11-12 JM Call Mark at 630-739-7770

2006 Case CX240, s/n DAC241862, 1365 Hrs, Boom 19’2”, 11’6” Arm, Shoes 3-Bar Steel 32”, Control Pattern Selector, Coupler........$145,000 11-12 JM Call Mark at 630-739-7770

2007 Cat 305-C, EROPS w/Air, Hyd, Thumb, 2200 Hrs, Rubber Tracks Courts Machinery Co. 11-12 PK Dick Courts • 507/678-2752

2008 BRAND NEW GROVE TM500E-2, 45 ton truck crane, 95’ four section main boom, 26’-45 offsettable jib, air ride dual axis controllers, Cummins 6 cylinder turbo 300 HP carrier, Cummins 4 cylinder off road upper saves fuel & energy, optional steerable lift axle available, Cleveland, Ohio .............................................CALL Call Andy at 216-316-1511 11-12 EB

2006 MANITOWOC 16000, s/n 16001040, 4444 Hrs, Cummins, Self Erection, Luffer & Maxer Prepped, 315’ #58 Main Boom, Harley Tip, Block, Ball, A/C Cab, Series 2 & 3 Counterweights, Certified, FOB Indiana ...................................CALL Call Andy at 216-316-1511 11-12 EB

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 1-800/456-4005 Ask for Don or Herb 10-11 PK

2006 JCB 214ELL Skid Loader w/Gannon Box Scraper, s/n 906450, Very Low Hours, Like New .................................................$47,500 Kirk Nelson at 785-823-6378 10-11 JM

1997 JCB 411B, S/N 527497, with 4179 Hrs, equipped w/AC, 3rd Function and Forks ....$40,000 Call 502/456-4050 Ask for Melissa or Albert 11-12 EB

Atlas Copco ROC F9 Hyd Drill, 5046 Hrs on Cat C9 Engine and 2600 Impact Hrs Call 888-9-RACKERS 11-12 JM Ask for Gary or Matt

2009 Kawasaki 90ZV Loader, w/550 Hrs on Cummins QSM11 Engine, 75%+Rubber, Like New Call 888-9-RACKERS 11-12 JM Ask for Gary or Matt

2004 JCB Micro Plus, #E6156, Never in the dirt!, FOB Wichita, KS ..........................................$7,500 Call Don Sellers 316/943-9311 10-11 JM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region.

2002 Kobelco ED 190 Blade Runner, s/n YL02U0117, 6720 Hrs, VERY GOOD CONDITION, 10’2” Arm w/48” Bkt ....................................$65,000 11-12 JM Call David 219-696-5680

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

2005 Hitachi ZX800, s/n 7YP006400, 5200 Hrs...... ...........Available for Rent in the Midwest! $290,000 11-12 JM Call David 219-696-5680

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 79

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

CLASSIFIEDS

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

AERIAL LIFTS

CRAWLER TRACTORS

EXCAVATORS

Mini Excavators

Skid Steer Loaders

Manlifts

Crawler Tractor

Hydraulic Excavators

All Makes & Models Rental, Parts, Service, Training

2004 John Deere 650H XLT, pipelayer, canopy, 90HP, 8'9'' blade, 18'' pads, M520 side boom, 2000 hours...$87,500.

2003 John Deere 120C, cab, A/C, long dipper, 42'' bucket, aux. hyd., good condition, 5822 hours...........................$42,500. 2003 Bobcat 331, 12'' track, 2 speed, arm rests, blade, good condition, 3292 hrs.....$17,500.

NH Construction Equipment New & Used Parts & Service

Ditch Witch SK500, s/n 1X2318, narrow aggressive tracks, riding platform, great condition, 811 hours...$10,500. Ditch Witch SK500, s/n 1Y2460, narrow aggressive tracks, riding platform, good condition.....................$16,500.

Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS

Illinois Truck & Equipment 815/941-1483 NH Construction Equipment New & Used Parts & Service

Compressors Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

COMPACTION EQUIP. Vibratory Compactors 2007 JCB UM75, 68'' width, 17,000 lb., 80 HP, 2 units, low rent hours. Pictures available. Good condition...........$35,000.

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

Modern Equipment Sales & Rental 800-445-4381 2007 John Deere 450J, LGP, ROPS, hydro trans., 124'' 6way blade, very good condition, 1072 hours ................$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128'' screen and sweeps, good condition, 1806.................$57,800.

2006 Hitachi 2X240 LC, cab, A/C, 188 HP, 12'10'' stick, 32'' pads, 60'' bucket, 1266 hours..................$124,500.

1996 Caterpillar 320L stroke delimber, 31" pads, Balderson attachment, good condition, 7157 hours ...............$92,000 Five Star Equipment Inc. 607/775-2006

NH Construction Equipment New & Used Parts & Service

Industrial Forklifts

Modern Equipment Sales & Rental 800-445-4381

Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

918-438-1560

Logging Equipment

FORKLIFTS

Classified...2 Insertions...95¢ Per Word One Word HEADING (Category to place listing):

FORESTRY EQUIPMENT

Illinois Truck & Equipment 815/941-1483

Industrial Tractor Co. Inc. 843-572-0400

Farm-Rite Inc. 908/625-0697

Modern Equipment Sales & Rental 800-445-4381

Each

Block

Gradall/Lull Sales, Service, Training

Classified Rates: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction equipment Guide. CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________ STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________ Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS

CARD NUMBER

EXP. DATE

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Service

Backhoe Loaders

We Service What We Sell! Warranty, Maintenance and More!

Industrial Tractor Co. Inc. 843-572-0400

Norris Sales Company 800/547-RENT (7368) 610/279-5777

2008 John Deere 524K, cab w/A/C, ride control, 2.75 yd. GP bucket, 609 hrs........$134,500.

Track Loaders

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24'' bucket, very good condition, 71 hours..........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24'' BH bucket, very good condition, 55 hours...........................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24'' BH bucket, excellent condition, 38 hours. ....................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24'' BH bucket, excellent condition, 384 hours..........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24'' BH bucket, good condition, 2862 hours..................$ 39 ,50 0 .

Now in PA & NJ

Construction & Industrial Equipment Rentals

MISCELLANEOUS

Illinois Truck & Equipment 815/941-1483

Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

Wheel Loaders

Modern Equipment Sales & Rental 800/445-4381

2007 New Holland B95, cab, A/C, 95HP, standard hoe, 4WD, 1 yd. bucket, 638 hours........................$48,500.

Daily - Weekly - Monthly Competitive Rates

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors Norris Sales Company 610/279-5777

MOTOR GRADERS Graders 1997 John Deere 770CH, cab, A/C, aux. hyds., 12' blade, 12,555 hours.............$54,750. Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

RENTALS Rental Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381 www.norrissales.com

Norris Sales Company 610/279-5777 Construction & Equpment & Supplies for the "Professionals" Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777

TELEHANDLERS Telescopic Handlers 2008 JCB 506-36, unused, canopy, 85hp, 6000 lb. capacity, 36' reach, 36 hours ..............................$44,500. Illinois Truck & Equipment 815/941-1483

TRAINING Operator Training Are your operators compliant with Federal Standards, OSHA, ANSI, ISO? MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

Page 80 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EMPLOYMENT OPPORTUNITY

AUTHORIZED OEM DEALER Chicago’s leading Caterpillar equipment dealership has exciting openings for the following positions: RENTAL SALES REPRESENTATIVES (TRACTOR) Promote rentals and the rental concept to customers, educating them in proper equipment applications along with technology advancements that enable greater productivity. Focus time on customer and job site visits, allowing the Rental Coordinators to complete rental transactions for customers. SERVICE MANAGER (TRACTOR) Account for all aspects of the Service Department and play a vital role in the overall success of Patten Caterpillar in the Elmhurst territory. Must possess a deep knowledge of heavy construction equipment maintenance and repair, the skills necessary to ensure efficient shop operations, and a continuous improvement mindset.

Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talbert Protec Waldon Perkins Hensley

2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

For more details and to apply, please go to www.pattencat.com/careers.

We are seeking a qualified equipment sales

PROFITS from page 1

representative for the MPLS/STP area. Excellent communication skills and previous heavy construction equipment experience preferred. Looking for a self motivator with the ability to promote JCB sales, service, parts & rental. High commission opportunity available.

; d gZ Xa d h j gZ V [ [ Z X i h b d gZ i ] V c _j h i nd j # > i V [ [ Z X i h nd j g l ] d a Z [ V b â n# 6 b âa^ d c [ V b â^ Z h l âa [ V XZ a d h ^ c \ i ] Z ^ g ] d b Z h i ] ^ h n Z V g# 8 V a a i d Y V n [ d g g Z V a ] Z a e V c Y \ j ^ Y V c X Z # 7 Z X V j h Z c d i ] ^ c \ ^ h l d g h Z i ] V c Y d ^ c \ c d i ] ^ c \ #

&" - - - " . . * " = D E :

Email Resume to Chad: info@go-jcb.com

Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

Construction Equipment Sales on the Rise for Volvo

Outstanding Career Opportunity...

Fax Resume To Chad: (763) 434-8328

YOUR PARTS SOURCE

Visit our website: www.howelltractor.com

These are excellent opportunities with a progressive, customer-oriented organization offering competitive compensation and comprehensive benefits.

Help Us Show Minnesota The Side Door

Bucyrus Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

The company, based in Goteborg on Sweden’s west coast, said it expected total market sales in both Europe and North America to reach 230,000 to 240,000 vehicles. That was up from an earlier estimate of 220,000 trucks in each market. “The North American truck market is driven primarily by the need to replace the increasingly older truck fleet with more modern and fuel-efficient trucks and by a positive trend in the U.S. economy and corresponding higher freight volumes,” Johansson said. Volvo also saw higher sales of construction equipment; including dump trucks, wheel loaders and excavators; while its bus sales were down by 4 percent. The company said it expects to invest $100 million over the next few years in its construction equipment manufacturing plant in Shippensburg, Pa., where it plans to make wheel loaders, excavators and articulated haulers. Johansson said production at Volvo’s Japanese subsidiary, UD Trucks, was disturbed by the March 11 earthquake and

tsunami. “We have a number of suppliers in Japan that are having difficulties in restarting their production, which means that we anticipate considerable disturbances to the production at UD Trucks during the second quarter,” the CEO said. T

ΣΑςΕ Α ΛΙΦΕ. ∆ΟΝ∏Τ ∆ΡΙςΕ ΗΟΜΕ ΒΥΖΖΕ∆. ΒΥΖΖΕ∆ ∆ΡΙςΙΝΓ ΙΣ ∆ΡΥΝΚ ∆ΡΙςΙΝΓ.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 81

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. JCB 5508, 550 (140170) | WE URGENTLY WANT TO BUY FROM USA CONTRACTORS/DEALER WHOLESALERS. CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– CF (WOODS) QUICK COUPLER | MUST HAVE 80 MM PINS 12-12 1/4 BETWEEN EARS CAN BE BETWEEN 17 3/4 AND 18 INCHES CENTER TO CENTER OF PINS CONTACT: TOM SCHIMELFENIG PHONE: 701.984.2522 FAX: 701.984.2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– ANY CONDITION-NEEDED FOR PARTS NPK E 218 HYDRAULIC HAMMER CONTACT: PHIL PHONE: 413-427-7171 EMAIL: PHILG123@COMCAST.NET –––––––––––––––––––––––––––––––– HITACHI ZX 270 | 2004-2006 YEAR, CLEAN WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 4X4 SINGLE AXLE CAB CHAS | LIKE A INTERNATIONAL 4300 DT466 WILL LENGTH TO FIT CONTACT: RALPH PHONE: 580-591-3922 FAX: 580-536-2355 EMAIL: RDICKSON2@GMAIL.COM –––––––––––––––––––––––––––––––– TIRE HANDLER | TIRE HANDLER FOR 773 & 637 TIRES CONTACT: TOM WEAVER PHONE: 540-389-7002 FAX: 540-389-7072 EMAIL: TWEAVER@PARADIGMINTL.COM –––––––––––––––––––––––––––––––– INSULATION BLOWER USED GOOD QUALITY | ALSO NEED 7X12 CARGO TRAILER FOR INSULATION BLOWER CONTACT: TONY PHONE: 727-459-3935 EMAIL: TONYSABELLICHI@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER SPECIALITE D8 WITH RIPPER 1977 AT 2011 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CF PINGRABBER QUICK COUPLER | MUST HAVE 80 MM PINS APPROX. 17 3/4 CENTER TO CENTER 12 INCHES BETWEEN EARS PREFER MECHANICAL BUT WILL CONSIDER HYDRAULIC CONTACT: TOM SCHIMELFENIG PHONE: 701-984-2522 FAX: 701-984-2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– BULLDOZER D7G AND D7H WITH RIPPER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– WILLARD | KOMATSU EXCAVATOR, 50,000 APPROX WEIGHT. $50,000 OR UNDER. WITH HEAT/AIR/THUMB. CONTACT: FROM MISSOURI PHONE: 660-484-3522 OR 660-542-4454 FAX: 660-484-3722 EMAIL: WKWOOD@GREENHILLS.NET ––––––––––––––––––––––––––––––––

TRIPLE L TRAILER | TRAILER THAT THE DECK LOWERS TO THE GROUND PREFERABLY A 7612 DROP DECK SCISSOR LIFT TRAILER CONTACT: DAN MCKINNEY EMAIL: DANO@COOPSONE.COM –––––––––––––––––––––––––––––––– RUBER TIRE TRACTOR BACKHOE | JD OR CASE GOOD SHAPE 10 TO 12 REACH CONTACT: RICH PHONE: 507-847-3266 507-840-0838 EMAIL: RICHLIN507@MSN.COM –––––––––––––––––––––––––––––––– CRAWLER CRANE | WANT TO BUY. AMERICAN 9310 CRAWLER. CONTACT: DON AUSTIN PHONE: 512-750-9742 FAX: 512-301-0163 EMAIL: MACHINERYPICTURE@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR 980G | YEAR 2000 +/CLEAN WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– JCB 550, 550140, 550170,1998, 2007 | WE ALWAYS BUY THESE UNITS. PLEASE SEND IF YOU HAVE. THANKS CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– 5000 POUND FORKLIFT/AIR TIRES | LOOKING FOR AN OFF SOLID SURFACE TIRED 5000 POUND FORKLIFT. PREFER GAS ENGINE CONTACT: JOE HOTZE PHONE: 618-548-1711 FAX: 618-548-6753 EMAIL: JOEHOTZE@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED TO BUY JCB TELEHANDLERS & CATERPILLAR WHEELLOADERS | OFFER ME THE FOLLOWING EQUIPMENTS.JCB TELEHANDLERS 550140/170.CATERPILLAR WHEEL LOADERS 950B,950E,966D,966E.966F. CONTACT: HIDAYAT KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED TO BUY HITACHI EXCAVATORS EX200,UH083,UH077 | OFFER ME THE FOLLOWING HITACHI EXCAVATORS EX200-1,EX200LC-1,UH083,UH077. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– 1986 1990 KAWASAKI WHEEL LOADERS | LOOKING TO PURCHASE ANY KAWASAKI WHEEL LOADER RANGING YEAR 1986 - 1990. CONTACT: ALI HUSSAIN PHONE: 314-537-2809 EMAIL: ABUMUJTABA1963@ YAHOO.COM –––––––––––––––––––––––––––––––– CAB FOR CAT 420D | OPEN ROPS CAB FOR CAT 420D CONTACT: JENNIFER PHONE: 256-533-1100 FAX: 256-533-1191 EMAIL: JENNIFER@ DONKENNEDYANDSONS.COM ––––––––––––––––––––––––––––––––

MT6642, MLT627 | WE ARE INTERESTED TO BUY URGENTLY THESE UNITS AT COMPETITIVE PRICES.THANKS CONTACT: AYYAZ ALLAM EMAIL: AUTOLINKINTERNATIONAL@ GMAIL.COM –––––––––––––––––––––––––––––––– JRB STYLE QUICK COUPLER TO FIT 544E LOADER | LOOKING FOR A COMPLETE HYDRAULIC QUICK COUPLER TO RETRO FIT ON A JD 544-E LOADER. USED IS PREFFERED CONTACT: JOHN NYE EMAIL: NYEPARENTS@YAHOO.COM –––––––––––––––––––––––––––––––– JCB550 OR 550140 (1997-2003), SAKAI T2, BOMAG 161 & 165 AD | WE NEED THE ABOVE MENTION EQUIPMENT ONLY FROM USA-CANADA-JAPAN & EUROPE.THANKS CONTACT: AYYAZ ALLAM EMAIL: AUTOLINKPK@GMAIL.COM –––––––––––––––––––––––––––––––– HORIZONTAL BORING MACHINE CONTACT: MARSHALL CONSTRUCTION CO. INC. PHONE: (434) 793-2715 FAX: (434) 793-2803 EMAIL: TPRESSLEY62@YAHOO.COM –––––––––––––––––––––––––––––––– USED #325 CAT DOORS, RIGHT HAND DOOR PART # 1776075; LEFT HAND DOOR PART # 1849022. DOORS NEED TO HAVE DECALS. CONTACT: MEMPHIS WRECKING COMPANY PHONE: 901-774-4011 FAX: 901-946-9793 EMAIL: MEMWRECK@AOL.COM –––––––––––––––––––––––––––––––– SEND US A QUOTE, CATALOGUE AND NECESSARY DETAIL FOR THE SUPPLY OF THE BELOW MENTIONED. 1. PEDESTRIAN TRENCHER - EQUIVALENT TO DITCH WITCH RT-24 WALK-BEHIND TRENCHER PRODUCT NEEDS A 36" BOOM AND A 100% BOLT-ON SHARKTOOTH CHAIN AND TRENCH CLEANER 2. TRAILER - EQUIVALENT TO DITCH WITCH TRAILER S1-A. CONTACT: PRASHANTH PHONE: 00968-92807072 FAX: 00968-23279065 EMAIL: ABUGHAZLAN@YAHOO.COM –––––––––––––––––––––––––––––––– SOLAR 130(EXCAVTORS)19905 • WE ARE INTRESTED IN BUYING SOLAR 130(WHEEL EXCAVATORS)1990-5 FROM SOUTH KOREA AND ALSO INTRESTED USED MOTOR GRADER CONTACT: AGHA WAQAR ALI KHAN PHONE: 92-300-4642935 FAX: 92-42-35942188 EMAIL: BDIL6@YAHOO.COM –––––––––––––––––––––––––––––––– KOMATSU MODEL PC20-7 SER#38938 CONTACT: F.MULTARI FAX: 845-586-3854 EMAIL: CAROL.MULTARI@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY FROM USER D6H D6R D7G D7H D8K D8N WITH RIPPER OR WINCH USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

NEED HITACHI EXCAVATOR EX200,EX200LC • WE NEED HITACHI EXCAVATORS EX200, EX200LC, YEARS FROM 1987 TO 1990, OFFER ME. CONTACT: NAQIB KHAN PHONE: +92-345-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– CAT IT QUICK COUPLERS CONTACT: EVIE PHONE: 603-899-2000 FAX: 603-899-2006 EMAIL: EVIE@202TRUCK.COM –––––––––––––––––––––––––––––––– BOBCAT SKID LOADER INQUIRY | WE ARE LOOKING FOR BOBCAT S130. WE WANT TO BUY 4 UNIT SKID LOADER. CONTACT: MAX PHONE: +886 2 22767678 FAX: +886 2 22767679 EMAIL: MAXMOUT@CATLON.COM.TW –––––––––––––––––––––––––––––––– EXCAVATORS • DEERE/HITACHI 650DLC [17FT ARM] OR KOMATSU PC750-7 [18 FT ARM] WITH LOW HOURS. CONTACT: DALE WITCHER PHONE: 803 376 6040 EMAIL: DWITCHER@SC.RR.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW | 3 UNITS GOOD CONDITION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– KOMATSU TRACK EXCAVATOR | 19972002 KOMATSU PC300LC-6 & PC400LC6: (12,000 HRS WORKING OR LESS) (KOMATSU ENGINE, ORIGINAL PAINT, ORIGINAL PUMP) MACHINE HAS TO BE WHOLE SALE PRICE AND COME FROM CONTRACTOR OR END USERS. CONTACT: DAVID | PHONE: 626-417-9808 | EMAIL: VPINTERNATIONALTRADINGCO@GMAIL.COM –––––––––––––––––––––––––––––––– NEED TO BUY FROM USER BULLDOZER D3 A D10 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES • CASE 580-E K L SL M & SMS CONTACT: FRANK @ TRICO EQUIPMENT PHONE: 800-654-USED (8733) EXT. 1230 FAX: 856-697-4842 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– PORTABLE JAW CRUSHER 36/48 OR 40/48 • GOOD CONDITION WORK READY CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– CAT 966C | NEED 966C UNIT READY TO WORK TO BE SHIP OVERSEAS. CONTACT: OSAMA ABBAS EMAIL: ABBASOSAMA@HOTMAIL.COM ––––––––––––––––––––––––––––––––

9FT11IN STICK FOR CAT 345 BL CONTACT: MATT BUSH THERUHLIN COMPANY PHONE: 330-239-2800 FAX: 330-239-1845 EMAIL: MBUSH@RUHLIN.COM –––––––––––––––––––––––––––––––– BARNES 30MU PUMP BODY • PUMP BODY OR COMPLETE UNIT CONTACT: RICHIE EMAIL: RFH3@CITLINK.NET –––––––––––––––––––––––––––––––– WE NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, IF YOU HAVE ANY AVAILABLE UNIT FOR SALE, PLEASE INFORM ME. CONTACT: HIDAYAT KHAN PHONE: 345-881-8803 EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC CA251D,CA251PD | WE NEED TO BUY DYNAPAC ROLLERS / PACKERS CA251D & CA251PD, IF AVAILABLE FOR SALE PLEASE INFORM ME. CONTACT: NAQIB KHAN PHONE: 333-329-8751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– SKID STEER | TIME TO UPDATE MY 1840 I WANT SOMETHING WITH AUG.HYD.WITH 50+HP CONTACT: ERIC PHONE: 847 909 7845 EMAIL: ECA567@ATT.NET –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER D11N OR D11R WITH RIPPER RUN FOR THE PRICE I PAY UNDER UNDER 100,000 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– KOMATSU WA 200 2005/ OR NEWER | AIR CAB, COUPLER A PLUS, JOB READY 2000 HOURS +/CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– VALMET | I AM LOOKING FOR PARTS TO FIT A VALMET 342 WHEEL LOADER, SPECIFICALLY SOME WORKING BRAKE CYLINDERS /ACTUATOR FRONT AND OR REAR. CONTACT: MICHAEL MALONEY EMAIL: MICHAELMALONEY@ATT.NET –––––––––––––––––––––––––––––––– A JOB TRAILER, OFFICE TRAILER CONTACT: EZRA MARTIN PHONE: 717-615-8315 FAX: 717-445-4468 EMAIL: EZRAMARTIN@EMYPEOPLE.NET –––––––––––––––––––––––––––––––– LORAIN MC7120 BOOM SECTIONS | D17 65" X 65" SQUARE BOOMS - NEED ONE 20 SECTION- NEED ONE 30 SECTION. NEW ENGLAND/NEW YORK TRISTATE. CONTACT: CAROL NIELSON PHONE: 203-380-8300 FAX: 203-380-8944 EMAIL: CNIELSON@DEMOLITIONSERVICES.COM ––––––––––––––––––––––––––––––––

VOLVO EC35 | CAB / AC CONTACT: MICK PHONE: 352-527-0072 EMAIL: INFO@FIELDCO.BIZ –––––––––––––––––––––––––––––––– MIXER MACHINE WITH LIFT CONTACT: AJAYAN PHONE: 944-666-3808 EMAIL: AJAYANVASTHU@GMAIL.COM –––––––––––––––––––––––––––––––– EXCAVATOR CAT330BL | PLEASE AM LOOKING FOR EXCAVATOR 330BL USED MACHINE HOURS NOT MORE THAN 6000HRS. CONTACT: ROCKIAH.ENTERPRISE EMAIL: WAJESTO@YAHOO.COM –––––––––––––––––––––––––––––––– EXCAVATOR COUPLER | EXCAVATOR COUPLER TO FIT JOHN DEERE 790E CONTACT: BOB MILLER PHONE: 641-982-4907 FAX: 641-982-4907 EMAIL: RJMILLER@OMNITELCOM.COM –––––––––––––––––––––––––––––––– COLD PLANER /MILL /GRINDER | LOOKING FOR 18" OR 24" HIGH FLOW ATTACHMENT FOR SKID STEER CONTACT: JAMES MANN PHONE: 1-404-273-9424 FAX: 1-770-306-2962 EMAIL: JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– NEED TO BUY D7G AND D8K WITH RIPPER USER FAST STRAIGHT BLADE USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CLARK RANGER 667 WINCH TYPE SKIDDER • GOOD CONDITION OLDER SKIDDER CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 7800 7810 GEHL OR 2109 MUSTANG • FOOT CONTROLS CAB WITH HEAT AIR!!!! LESS THAN 2000 HRS 20000 OR LESS FOOT CONTROLS CAB HEAT HIGH FLOW??? UNDER 2000 HRS 20000 OR LESS CONTACT: GIL SODAWASSER PHONE: 701 320 0259 EMAIL: GSPLAYME@GMAIL.COM –––––––––––––––––––––––––––––––– D6H DOZER CONTACT: ARDONNA WEAVER PHONE: 574-536-0763 FAX: 574-831-2914 EMAIL: AWEAVER@ BEERANDSLABAUGH.COM –––––––––––––––––––––––––––––––– CAT 3408 ENGINE CONTACT: WILLIE PHONE: 201-786-3354 FAX: 201-444-6377 EMAIL: WKIRCH@OPTONLINE.NET –––––––––––––––––––––––––––––––– TAKEUCHI EXCAVATORS TRACK LOADERS • I BUY TAKEUCHI TRACK LOADERS AND EXCAVATORS ALL CONTACT: PAUL MADSEN PHONE: 407-468-1070 FAX: 321-445-9851 EMAIL: CFLRESALE@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 82 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Powers Auction Service Holds Rental Fleet Sale in Waukegan

Barry Heinrichs (L), president of Burris Equipment, speaks with Terry Crowder about the rental equipment going up for auction.

Dave Sztuk (L) of James Martin & Associates and Burris Equipment’s Richard Lillich discuss the auction.

Dennis (L) and Sean Klumb of KS Energies check out this Case 9007 excavator.

(L-R): John Smith and Greg Wensel, both of Smith Projects, and Roger Belski of Belski Electric, look over the well maintained skid steers at the auction.

Waiting for the bidding to start on the skid steers are Rob Rohrs (L) of Bob Rohrs & Son Sewer Water and Excavating and Jim Atwell of Atwell Sewer Service.

Dan Powers, president of Powers Auction Service, calls for more bids on the excavators.

owers Auction Service held a rental fleet replacement sale for Burris Equipment May 13 in Waukegan, Ill. Highlights of the auction included a 2001 Case 9007B Running this Hyundai 160 LC-7 excavator is Dave excavator and 2007 Hyundai HL740-7 wheel loader that Deral Meyer of Meyer Electric takes a break from the Normington of Normington Excavating. each sold for a winning bid of $56,000. auction action in the cab of this Case 430 skid steer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 83

Online A Auctions uctions June 2011

JUNE 2 Constr Construction uction

JUNE 15 Motors

JUNE 23 Construction Constr uction

JUNE 8 Constr Construction uction and Agr Agriculture iculture

JUNE 9 Constr Construction uction

JUNE 16 Construction Constr uction

JUNE 22 Construction Constr uction

JUNE 24 Agriculture Agr iculture

JUNE 30 Construction Constr uction

Inspected and Guaranteed www.ironplanet.com s 888-433-5426 Go to www www.ironplanet.com .ironplanet.com to see the auctions.

Page 84 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 85

THE BEST OF THE BEST! Complete Liquidation: ABC Rentals (Komatsu-Bobcat Rentals)

FRIDAY, JUNE 3 @ 9:30 AM RACINE (STURTEVANT), WISCONSIN NOTE: ABC Rentals, a highly successful rental company, having retired will sell their fine rental fleet at public auction. HILITES: 15 HYDRAULIC EXCAVATORS: 2006 Komatsu PC400LC (quick coupler), 2008 Komatsu PC300LC-8 (QC, 400hrs.), 2008 Komatsu PC300LC-8 (QC, thumb), 2007 Komatsu PC300LC-8 (QC), 2006 Komatsu PC300LC-8 (QC), 2008 Komatsu PC220LC8 (QC), 2006 Komatsu PC220LC-8, 2008 Komatsu PC160LC-7EU (thumb), 2007 Komatsu PC160LC-7 (thumb), 2005 Komatsu PC160LC-7 (thumb), 2004 Komatsu PC138USLC (QC), (3) 2006 Komatsu PC120LC-6 (QC), 12 MINI EXCAVATORS: (3)2007 Bobcat 335MX (cab), (5) 2007 Bobcat 335MX, (4) 2008 Bobcat 323, 4 CRAWLER TRACTORS: 2005 Komatsu D39EX-21, 2003 Komatsu D39EX-21, (2) Demo 2007 Komatsu D31PX-21A, CRAWLER LOADER: Cat 973, 3 RUBBER TIRED LOADERS: 2007 Komatsu WA200-5 (QC), 2007 Komatsu WA200-5 (QC), 2006 Volvo L110E, TRACTOR LOADER BACKHOES: Cat 426, RUBBER TRACKED SKID STEER: 2008 Bobcat T190 (EROPS), 12 SKID STEERS: (9) 2008 Bobcat S185, (3) 2007 Bobcat S185, FORKLIFT: Clark CHY-150B, ROLLOFF TRUCKS: 1987 Mack (tri.), ATTACHMENTS: Skid Steers: New 2010 Super Cut Asphalt Cutters, Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Versatech Hay Spears, Root & Grapple Buckets, Frames, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets, New 2010 Super Cut Asphalt Cutters, Excavators: 3500-4800-5600 Thumbs, OVER 400 LOTS OF LIKE-NEW TOOLS & SUPPORT EQUIPMENT: Brands may include: Dewalt, Hilti, Bosch Power Tools: Wet Cut Tile Saws, 20in. – 16in. Electric Chainsaws, Power Pruner, Cement Finishing Kit, Electric Reciprocating Saw, 24in. Wet Saw, 7/8in. Roto Hammer Lite , 1/2in. 18 volt Cordless Drill, 5600 watt Generator, 3/4in. Crimper, 1/2in. Crimpers, Cordless Finish Nailers, Air Finish Nailer, Air Roofing Nailers, Low Velocity Gun, Ridgid Gas Wheelbarrow (Air Comp. 5.5hp/ 9 gal.,), Gas Powered Light Duty- Mid Tine & Rear Tine Tillers, Gas Power Rakes, Gas Powered 1 and 2 man Augers, Brush Hog, Lawn Rollers, 3in. Chipper Shredder, Mini Cable Installer, 4 Cycle Brush Cutter, Drum Floor Sander, Electric 7in. Floor Edger, Electric Carpet Stapler, Carpet Kicker, Electric Carpet Steamer, Floor Stripper, Cold 3500psi & 2500psi Pressure Washers, Walk Behind 14in. MK Concrete Saw, Ridgid Portable Table Saw, Ridgid 18volt Cordless Drill Set, Electric Demo Hammers, 50ft. x 1/2in. Electric Sewer Snake, 50ft. x 1/2in. Manual Sewer Snake, 75ft. or 50ft. 5/8in. Sewer Snake, 3in. Trash Pump, 1/2in. Crimper, 3/4in. Hardwood Floor Nailer, Cordless Finish Nailer, Air Finish Nailer, All Purpose Coil Nailer, 14in. Premium Vibratory Plate Compactor, Electric Wallpaper Steamer, Gas Powered Air Broom Back Pack, Towable Hydraulic Auger, Brush Hog, Carpet Cleaner, Square Buff Floor Sander, Drum Floor Sander, Floor Maintainers, Laser Levels, 4 Wheel Dolly, 50-95,000btu Kerosene Heaters, 18in. Mini Trencher, Bull Float, Electric Demo Hammers, 3000 watt – 6500 watt Generators, Roofers Pumps, 3/4in. Crimper, 6in. Soil Pipe Cutter-Ratchet, Airlessco LP 540 Highboy Paint Sprayer, Lawn Rollers, 4in. x 24in. Belt Sander, Electric Drywall Sander, Random Orbit Floor Sander, 5 piece Drywall Panel Lift, Vinyl Tile Cutter, Electric Cement Mixer, Gas Powered

36in. Power Trowel w/ standard handler, Toe Kick Saw, Electric 1/2in. Drill, Low Velocity Multi Guns, 4 Cycle Weedeater, Sq. Buff Floor Sander, Floor Maintainer, Carpet Stretcher & Case, 3in. Door Planer, Transit Level Kit, CST Laser Level, DitchWitch Hydr. Trencher, 48in. – 42in.-36in.18in. Mini Trenchers, Electric 10in. Paver Saw, 14in. MK Walk Behind Concrete Saw, Worm Drive 7 1/4in. Circular Saw, Ridgid Orbital Jig Saw Kit, Ridgid 1/2in. S2 Speed Drill Kit, Drywall Screwdriver, Heat Gun Blower, Post Hole Driver, HD Trencher (Honda 5.5hp), Electric Carpet Seamer, 9in. Grinder, Electric 3in. Door Planer, Floor Abrader, 2 gal. Upholstery Spotter, Blastrac 10in7in. Scarifiers, High Speed Grinder, 17ft. Multi-Purpose Ladder, 17ft. Adjustable Step Ladders, Appliance Dolly, Cement Finishing Kits, Graco Magnum Texture Sprayer, 12 ton Hydraulic Jack, 100-125 amp Welder, 125 amp Welder/ Generator, Ridgid Twinstack 3.25hp Air Compressor, Gas Powered Mantis Tiller, Leaf Vacuums, Fence Stretcher Kit, 75-120,000btu Propane Heaters, Jamb Saw, LG Jumping Jack, Lawn Edgers, Stump Grinder w/Autosweep, 13hp Stump Grinder, Cut Out Tool Combo Kit, 18in. – 24in. Pipe Wrenches, Hardwood Face Nailers, Snow Roof Rake, 4 Cycle Brushcutter, 7in. Concrete Handheld Grinder, 10 ton Screw jacks, JLG Pro-Boom 35, LLG Electric Mixer, Electric Breaker, Toilet Auger, Vinyl Tile Stripper, 5ft. Digging Bar, Clam Shovels, Carpet Blower, Jamb Saw, Vermeer RT60 Mini Trencher, 3in. x 21in. Belt Sander, 1/8in. – 2in. Conduit & Pipe Cutter, Min Cable Installer, Hardwood Floor Nailer, Tampers, SUPPORT EQUIPMENT: New Mustang Plate Compactors, New Mustang Concrete Vibrators, New Mustang Submersible Pumps, New Abrasive & Diamond Blades, New Stiff neck Pintle Hitches, New Air Spray Guns, New Ratchet Cargo Straps, New Impact Wrenches, Air Spray Guns, New Huskie Hammer Drill, New Jack hammer Hose, New Impact Wrenches, New Water Hose., Pintle Hitches, Ratchet Straps, Diamond Blades, Submersible Pumps, Concrete Vibrator, Impact Wrenches, Water Hoses, Air Spray Gun Kit, Water Pump, Mustang Rammer, Jack Hammer Air Hose, Hammer Drill, Hose Reels, Scaffolding, Porta Powers, Straps, Bottle Jacks, Battery Charger, Winches, Socket, Hose Reel, Booster Packs, Weedeater, Chainsaws, Vise, Sandblaster, Drill Press, Tri-Ball, Post Hole Digger, Cherry Picker, Wagon, Trailer Jacks, Pressure Jack. SITE PHONE: 262-886-2778, SITE FAX: 262-886-2369 REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc. REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon

online bidding available: www.lyonauction.com DIRECTIONS: From General Mitchell Int’l Airport in Milwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20. Proceed to East Frontage Rd., go South to auction site on left. From Chicago O’Hare Field: (approx. 45 min.), take I-294 N to I-94 N. Proceed to Exit 333, Hwy 20E, continue to East Frontage Road. Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177.

ALEX LYON & SON Sales Managers & Auctioneers, Inc.

Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com

Page 86 â&#x20AC;˘ May 28, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Now Accepting: Excavators, Dozers, Loaders, Semis, Trucks, Trailers and Related Equipment

6 $$ * I94 to Exit 267, South to Co. Rd. Y Johnson Creek, WI Consign by Friday, June 10th for Free Flyer Advertising!

6 #+ * Jct I29-Exit 62 & Hwy. 18 South of Sioux Falls, SD Consign by Friday, July 8th for Free Flyer Advertising!

For a complete listing of our upcoming auctions visit www.iraymn.com

WEDNESDAY, JUNE 8, 2011 z SALE TIME: 9:00AM LOCATION: 220 Sunset Way, Alexandria, MN

Live Onli ne Bidding!

AUCTIONEERâ&#x20AC;&#x2122;S NOTE: Please note the large volume of items, from heavy equipment, aerial lifts & major construction pieces to concrete, asphalt/paving & support supplies. Auctioneers will be running two rings. Major construction items will be sold at 11:00 AM. Live online bidding on major items available. This is a condensed list, see complete listing & photos online. Registration, terms & details at www.steffesauctioneers.com. WHEEL LOADERS & ATTACHMENTS 1999 Komatsu WA500 wheel loader, N14 Cummins, 6 yd. bucket, shows 29,500 hrs., complete reconditioning from Gen. Equip., $30,000 work order, new tires, S/NA70293 1993 Komatsu WA450-2 wheel loader, JRB 5 yd. bucket, 26.5-25 Michelin tires, shows 25,252 hrs., S/N25332 Bucket forks Snow pusher, 12', for payloader Loader bucket, 5 yd., for Fiat Allis 745 or FR20 loader Blacktop coulter for payloader bucket EXCAVATORS & ATTACHMENTS 1993 Hitachi EX300LC excavator, 13.2 stick, 60" bucket, 4050% undercarriage, 32" pads, shows 15,922 hrs., S/N15K5319 1986 Komatsu PC300LC-3 excavator, 10' stick, aux. hyd., 40-50% undercarriage, 32" pads, 60" digging bucket, 11,152 hrs., S/N12402 1996 Komatsu PC50UU-2 mini excavator, double-hinged, side offset, shows 4,680 hrs., S/N14652 Komatsu grapple for PC220-200

3 H*))I H%$,I +(*E)$%,

EXCAVATORS & ATTACHMENTS CONTINUED 2005 MCR excavator concrete crusher for Komatsu 200 & up 2004 Rock Ram excavator hyd. hammer z Trench box, 20' (6) dog house trench boxes z (3) EBI sand buckets for PC300 FORKLIFTS & LIFTS 1997 Lull 844-42, S/N97-W21P22-987 1987 Lull Highlander 844, 8,000 lb., 4WD 1985 Lull Highlander 844, open station, 4 wheel steer, 4WD, 34' lift, 8,000 lb., tilt forks, 6,000 hrs., S/NJD1442LN Willmar Wrangler articulated forklift, diesel Set brick forks for Lull forklift z Various lift baskets for forklifts 1995 Grove AMZ66XT lift, 60', diesel, 4WD z & much more! TRACTOR & ACCESSORIES, SKID STEER LOADERS & ATTACHMENTS, ASPHALT/PAVING EQUIP, WELDER GENERATORS & AIR COMPRESSORS, CONCRETE EQUIP, CONCRETE FORMS, LASER EQUIP, TRUCKS, PICKUPS & PARTS, DRY VAN TRAILERS & STORAGE CONTAINERS, OTHER TRAILERS & EQUIP, TANKS, STEEL INVENTORY, SCAFFOLDING & MUCH MORE!

LEEâ&#x20AC;&#x2122;S CONSTRUCTION z BRAD (320) 762-0325 Steffes Auctioneers Inc. 2000 Main Avenue East, West Fargo ND 58078 (701) 237-9173 Brad Olstad z www.steffesauctioneers.com

Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-11-002 Real Estate Auctioneer & GPPA Certified Equipment Appraiser

All items sold as is where is. Payment of cash or check must be made sale day before removal of items. Statements made auction day take precedence over all advertising. $35 documentation fee applies to all titled vehicles. Titles will be mailed.

The AGC of ST. Louis is excited to announce a new award to recognize excellence among the Specialty Contractor members of the AGC of St. Louis. Through a secret ballot process, AGC General Contractors will vote for FIRST PLACE specialty contractor in ten separate categories: Concrete/Paving Earthwork & Utilities Electrical Environmental Remediation & Demolition Finishes, Openings & Fixtures Masonry Mechanical Structural & Finish Carpentry Structural & Finish Metals Thermal & Moisture Protection Each first place contractor will be recognized with a FIRST PLACE award in the specified category. The Specialty Contractor receiving the highest number of votes overall will also be awarded the distinction of Specialty Contractor of the Year by the AGC of St. Louis. This award allows the General Contractors to publicly acknowledge those best practices. To be eligible, a Specialty Contractor must be a member of the AGC of St. Louis. The Specialty Contractor award recipients will be named and presented their awards at the AGC of St. Louis Awards Gala featuring the Keystone Awards & the Specialty Contractor of the Year on Thursday, November 3, 2011 at the Millennium Hotel in downtown St. Louis. You wonâ&#x20AC;&#x2122;t want to miss this event as we name the first Specialty Contractor of the Year! AGC of ST. LOUISâ&#x20AC;ŚThe Keystone Awards Call for Entries is Coming!!! The Keystone Awards are approaching quickly! Be on the lookout for the Keystone Awards Call for Entries flyer, and start thinking about which projects you are going to submit in this yearâ&#x20AC;&#x2122;s program! AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC. *** AGC of St. Louis Early Bird Sponsorships Now Available for the 2011 Spring Sporting Clays Tournament!!! ACT FAST!!! The costs of 2011 sponsorships have been REDUCED by $50! Sponsorship opportunities will be available after the March 25th deadline, but not at the discounted rates that are available to the early birds! Contact AGC St. Louis office for more details! July 18-20, 2011 â&#x20AC;&#x201C; Workshop. Illinois Association of Aggregate

B C usiness

alendar

Producers (IAAP) Illinois Teachers Workshop: Teachers from your community should register. The IAAPâ&#x20AC;&#x2122;s Public Information and Education Committee will hold its 15th annual Illinois Teachers Workshop: Rocks, Minerals & Mining in Todayâ&#x20AC;&#x2122;s Society at Lewis University in Romeoville, Illinois on July 18 to 20, 2011. This workshop is proving to be very popular. Teachers have begun registering and we are now 1/3 of the way to our capacity of 35 teachers. The goal of this workshop is to inform teachers in grades K-12 about the importance of rocks, minerals, and mining in everyday life. Questions? Please call, Shawn McKinney, Outreach Manager, IAAP, 1115 S. 2nd Street, Springfield, IL at 217-241-1639. AED Dealer Executive Events Associated Equipment Distributors (AED) is pleased to announce several events and programs tailored specifically for dealership principals and senior management. AEDâ&#x20AC;&#x2122;s CFO Conference: Financial Issues for Distribution CFOs and CEOs May 24-25, 2011, Oak Brook, Illinois Repeated October 20-21, 2011 Join the financial powerhouses of the industry for an in-depth examination of the accounting and tax issues, financial strategies, and profit opportunities for the equipment distributor. The CFO Conference is your chance to meet with financial experts and peers for frank discussions, thorough analysis, and an insiderâ&#x20AC;&#x2122;s perspective on the current year and what lies ahead. The AED CFO Conference is designed specifically for CFOs, CEOs, COOs, as well as other key executives with financial responsibilities. All attendees will enjoy a blended program of seminars and workshops with an emphasis on hands-on learning, group discussion and Q&A forums. AGA of St. Louis Events! June 9, 2011 â&#x20AC;&#x201C; Picnic. AGC St. Louis 2011 Construction Leadership Council presents Build-A-Brat-Picnic with Beer, Brats and a Band! What more do you want?!? Held on Thursday, June 9th from 4:30 PM to 7:30 PM, Gloria Rogers Pavillion in Tillis Park, South of Highway 40 at the corner of McKnight and Litzsinger, St. Louis, MO. Live Music, $15.00 a person: price includes bratwursts, beer and soda. This year, there is a silent auction and a 50/50 raffle for attendees to participate in and all proceeds will go towards the Jeff Staley Safety Foundation and the

Construction Careers Center. AGC members can register online or you may pay at the door. Questions??? Contact Donna Pigg at AGC of St. Louis, telephone: 314-781-2356. ITâ&#x20AC;&#x2122;S RED BIRD SEASON IN THE NEW STADIUM!!! 2011 St. Louis CARDINALS Tickets are now available! The AGC of St. Louis has a luxury suite this season at Busch Stadium. The 2011 price for a single game is $1,900. Three game packages are available for $5,700, and five game packages are priced at $9,500. All food and beverages costs are in addition to these fees. You may reserve your choice of game packages by listing the package number and emailing information to dpigg@agcstl.org. Reservations will be held in the order your request is received. The game dates are firm, however, the Cardinals say that some game times may be changed to accommodate national television. If you have questions, please call Donna M. Pigg, Administrative Accountant, at 314-781-2356 extension 108. AED Executive Forum September 8-9, 2011, Rosemont, Illinois This two-day event will combine information on the trends and issues that are shaping the future of equipment distribution with an opportunity to network with senior-level industry executives. An impressive group of leaders will share their insights and perspectives and challenge you with new answers to old problems. Successful 2010 Build St. Louis Expo. The Build St. Louis Expo was a great success! The aisles were full of representatives from all facets of the industry. All of the booths were sold, so attendees had some great new specialty contractors to meet and view new products on the market by the suppliers. The expo gave another meaning to the words â&#x20AC;&#x153;social networkingâ&#x20AC;? and actually shaking hands. Our appreciation to our industry participants â&#x20AC;&#x201C; St. Louis Council or Construction Consumers, AIA St. Louis, St. Louis Minority Business Council and Contractors Assistance Program who helped promote the event to their members. KEYSTONE AWARDS â&#x20AC;&#x201C; ITâ&#x20AC;&#x2122;S TIME TO SUBMIT YOUR PROJECT! The Keystone Awards are approaching quickly! Start thinking about which projects you are going to submit in this yearâ&#x20AC;&#x2122;s program. Submissions are due June 8th!!! ***SAVE THE DATE of June 7, 2011 for a Seminar on Unfunded Pension Liability The AGC of St. Louis and the AGC of Missouri are planning a Seminar on Unfunded Pension Liability for Tuesday, June 7, 2011 at the Ameristar Hotel and Casino in St. Charles; Breakfast and Registration at 7:30 AM and Seminar starting at 8 AM and concluding by Noon. Final details and advance registration will be available soon. So, please mark this date on your calendar and watch for details.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 87

2008 JOHN DEERE 1050J

2009 JOHN DEERE 350DLC

FOLLOW THE NEW LEADER. INNOVATIVE EXPERIENCED KNOWLEDGEABLE

UNRESERVED PUBLIC AUCTIONS: JUNE 7 . LAFAYETTE, LOUISIANA JUNE 28 . OCALA, FLORIDA

CAT PM565 *Equipment subject to change

View the full equipment list, photos, and inspections at: www.catauctions.com

BID ONLINE: WWW.CATAUCTIONS.COM Follow the new leader.® www.catauctions.com

2008 JOHN DEERE 624J

CAT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121 855.228.2286 info@catauctions.com

©2011 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 88 â&#x20AC;˘ May 28, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Upcoming Heavy Equipment Auction Saturday, June 11, 2011 @ 8:00 AM 2- Rings, On-Line Bidding powered through www.waynepikeauction.com Wayne Pike Auction Co LLC 9492 Baptist Church Rd â&#x20AC;˘ Princeton, MN 55371 By Order of US Bankruptcy Court #11-60267

&ORMERĂĽ!SSETSĂĽOFĂĽ,ARGEĂĽ2ENTALĂĽ/PERATION

6!,#/ĂĽ2%.4!,ĂĽ %15)0-%.4ĂĽ).# 1717 Kimball Road SE in Canton, Ohio 44707

FRIDAY, JUNE 10th at 10AM Inspection: Thurs. 6/9/11 from 9AM-4PM

ĂĽ"//-ĂĽ,)&43

ĂĽ2/5'(ĂĽ4%22!).ĂĽ&/2+,)&43

ĂĽ3#)33/2ĂĽ,)&43

(6) Crawler Dozers, (3) Loaders, (5) Scrapers, Skid Steers, Forklifts, Cranes, Motor Graders, Street Sweepers, Asphalt Rollers, Tampers, Dump Trucks, Digger Derrick Trucks, Flatbeds, Service Trucks, Yard Spotter Trucks, Tag Trailers, End Dump Trailers, Low Boy Trailers, Ag Tractors, Attachments, Collector Cars, Vehicles, Golf Carts, Harley Davidson, Large Selection of Landscape Block, Miscellaneous Construction Related Items. Please visit www.waynepikeauction.com to view the online auction catalog and to register for online bidding.

WAYNE PIKE

AUCTION COMPANY, LLC

License 48-01 â&#x20AC;˘ Princeton, MN 55371 â&#x20AC;˘ 763-389-2700 www.waynepikeauction.com

( 1 4 ) R o u g h Te r r a i n F o r k l i f t s A s N e w A s 2 0 0 8 0%44)"/.% *,' ,5,, 4%2%8 3+942!+ '%(, p &ORKLIFTS UP TO LB #APACITY p "2/$%23/. #ARRY $ECK #RANE p "OOM ,IFTS 3./2+%, * , ' ' % . ) % ( 9 3 4 % 2 p 3 C I S S O R , I F T S * , ' 3 . / 2 + % , 3 + 9 * ! # + ' % . ) % - % # p 34%2,).' ,4 4RUCKS W 0ALFINGER $RY 7ALL "OOM 4RUCKS p +%.7/24( 4 " 4RUCK 4RACTOR p 0ICKUP 3ERVICE 4RUCKS p 4RAILERS p 4!+%5#() 4" -INI %XCAVATOR p $IESEL %NGINES p /VER OF !LL 4ERRAIN Forklift, Boom Lift & Scissor Lift Parts TERMS: Cash or company check. Inspection day before from 9 AM to 4 PM. Buyer's Premium: 12% Onsite, 15% Online w/ www.bidspotter.com.Visit www.myronbowling.com or call for a free color brochure.

*EFFREY , ,UGGEN /( ,IC #)! /( ,IC

-YRON # "OWLING /( ,IC -YRON "OWLING !UCTIONEERS /( ,IC

Farm Machinery, Construction Equipment, Trucks, Fleet Vehicles Selling on Big Iron Timed Online Internet Auction

Why Sell on Bigiron.com? â&#x20AC;˘ No transportation cost â&#x20AC;˘ Seller Representation â&#x20AC;˘ Auction competition sets highest selling price â&#x20AC;˘ Each item sells to the highest online bidder â&#x20AC;˘ Reasonable selling fees â&#x20AC;˘ Developed by auctioneers â&#x20AC;˘ NO BUYERS PREMIUM

Call a certified Big Iron Sales Representative

1-800-WE SELL 8

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 89

COMPLETE LIQUIDATION CONSTRUCTION EQUIPMENT, TRUCKS, TRAILERS, LARGE QUANTITY SUPPORT EQUIPMENT AND ATTACHMENTS

Mercer Equipment Rentals SATURDAY, JUNE 11 @ 10:00 AM SUNDAY, JUNE 12 @ 10:00 AM

DETROIT, MICHIGAN NOTE: Mercer Equipment Rentals- an independent rental store business of over 40 years has decided to retire and pursue other interests. EARLY HILITES INCLUDE: HYDRAULIC EXCAVATOR: Kobelco SK120, 2 CRAWLER TRACTORS: Komatsu D32P, Komatsu D21P, 3 TRACTOR LOADER BACKHOES: Case 580M (4x4), (2) Case 580L (4x4), ASPHALT ROLLER: 2004 Stone WP3100R, 4 SKID STEERS: 2002 Case 70XT, (2) Case 60XT, Case 1840 (parts), 8 TRENCHERS: (4) Ditch Witch 1820, (2) 2005 Ditch Witch 1330, (2) Ditch Witch 1030, ROUGH TERRAIN FORKLIFT: Case 586E, FORKLIFT: Shreck RRH-E, 3 AIR COMPRESSORS: Atlas Copco XATS 7600D 750CFM, (2) Atlas Copco XAS96JD, 9 GENERATORS: Atlas Copco 150kw, (2) Gillette GPN30H 3kw, (6) Gillette GP30H 3000watt, 5 WELDERS: Lincoln Commander 500, Lincoln Stick Welder, Miller Big Blue 400D, AutoArc Mig welder, Craftsman 2300amp, Welding Equipment: Blue Point Plasma Cutter, Mini Torch Set, Oxy/Acetylene Tanks w/ Torches, 23 PUMPS: Tsurumi KRS2-85 8in. Submersible Pump, Tsurumi KTZ45.5-60 4in. Submersible Pump, Tsurumi KRS2B4 4in. Submersible Pump, 2004 Tsurumi 3in. Trash Pump, Tsurumi NK2-15 3in. Submersible Pump, 2008-2003 Tsurumi 2in. Trash Pump, 2008 Tsurumi F13 3/4in. Submersible Pump, (2) Gorman Rupp 8in. Pump, Gorman Rupp CE6A60 6in. Trash Pump, Gorman Rupp 4in. Diaphragm Pump, (2) Gorman Rupp 3in. Trash Pump, Gorman Rupp 2in., (2) Gorman Rupp 80E 3/4in. Centrifugal Pump, Multiquip ST2020B 2in. Submersible Pump, Rice D30-01 Hydrostatic Pressure Pump, Versamatic 3in. Diaphragm Pump, Enerpac Hydr. Pump, Little Giant Submersible Pump, 2005 AMT 3/4in. Utility Pump, LIGHT TOWERS: Boss BKK64mh, SCAFFOLDING: Bil Jax: (35)Top Safety Rails, (16) Wheeled Outriggers, (41) Outrigger Legs, (42) Toe Kicks, (12) Uprights, (49) Support Bars, (15) Platforms, (8) Misc. Wheels, (44) Support Cross Rails, (4) End Frames, LANDSCAPE & SNOW EQUIPMENT: (2) 2001 Snapper SNQMR 21in. Mulcher Lawn Mower, Snapper 17in. Snowblowers, 21in. Mower w/Bagger, Giant Vac Leaf Blowers, (3) Bluebird 720B Lawn Seeder, (4) Merry Tiller Suburban Rototillers, Post Hole Diggers, Bluebird Aerators, Stihl Cultivator, Stihl Hedge Trimmer, Bluebird Sod Cutters, Stihl 24in.-21in. - 20in. Chainsaws, Stihl Sickle Bar Trimmers, LOADER LANDSCAPE TRACTORS: NH TC29, 2 CHIPPERS: 2000 Vermeer BC625A, 2000 Vermeer 935, CAM 1 CART-AWAY CONCRETE PLANT: 15 cu. Yd. per hour , powered by 15hp 3 ph. Electric motor, (208-230/ 460 volt AC 60/ 30 amps). ¼ to 1 ¼ yard timed mixing cycles. 15 cubic yards per hour continous. Volumetric control. Cement: Auger revolutions. Aggregate: Adjustable striker plate. 9in. x 13ft. mixing auger. Replaceable ny-hard wear shoes. Rubber mixing trough. Dual pump hydraulic system. Solenoid valve belt & auger controls. Manual valce mix auger controls. 5-7 cubic yard agg. Storage hopper. 30 bag or 200 barrel cement silo. Sight water flow meter. 150 sq. ft. plant footprint. 10ft. diameter silo, 20 ft. high. Length: 20ft. (with auger down). Width: 7ft. Height: 10ft. (with auger up.) Shipping weight: 6,000lbs. Loading height at agg. Hopper: 7ft. 6in., , 6 CONCRETE TRAILERS: (6) Cartaway 1 1/4yd., Trailer Haul, Cartaway (box only), Cartaway (Parts only), CONCRETE EQUIPMENT: 2000 Amida OMPB21 Concrete Buggy, (4) Amida OMPB16 Concrete Buggies, Edco CPU-10C Concrete/ Asphalt Plane, 2001 Stone 855PM 8cu. Ft. Mortar Mixer, 2004 Stone 655PMP 6cu. Ft. Mortar Mixer, 20052004 Stone 65CM 6 cu. Ft. Cement Mixer, 2001 Stone 2CM Elec. Concrete Mixer, Target PAC IV Concrete/ Asphalt Saw, Wacker CT36AGT Power Trowels, Amida OBD 032D 4x4 Artic. Concrete Carts, Amida OBD031D 4400lb. Concrete Dump Bucket, Oztec Concrete Vibrators, Hosetec BP50 Backpack Concrete Vibrator, (2) Interlocking Cement Bin Blocks, (24) Interlocking Cement Bin Blocks, Aluminum Concrete Screed Bars, (15) Misc. Finishing Hand Tools, (10) Concrete Bullfloats- asst., (8) Concrete Tool Extension Poles, 2 DUMP TRUCKS: Peterbilt (tri.), 1999 GMC (s/a), 2 TRUCK TRACTORS: (2) 1994 Peterbilt (tri.), 2 STAKE TRUCKS: GMC C6500 (s/a), 1995 Ford F350 (s/a), 4 GRAVEL TRAINS: 1995 Dorsey Tri. w/ 5 axle aluminum pup, 1999 Hilbilt w/ 4 axle steel lead – 5 axle steel pup, 1996 Hilbilt w/ 4 axle steel lead- 5 axle steel pup,1975 Fruehauf w/ 3 axle lead and 5 axle aluminum pup, DUMP TRAILERS: 2002 East 24ft. (quad.), 3 TAGALONGS: (2) Redi Haul FS14HS-102 14ft. (t/a), Cronkite Skid Steer (t/a), 9 UTILITY TRAILERS: (2) 2002 RediHaul RHIOUTS 5ft. x 10ft. (s/a), (2) RediHaul R5713HH (s/a), (4) Ditch Witch D1A 6ft. (s/a), 10ft. x 40in. (s/a), 7 CAR HAULERS: (7) s/a, STORAGE BUILDINGS: 12ft. x 33ft. Cover It All Weather Shelter, HEATING EQUIPMENT: Sureflame 1,500,000 btu Propane/Natral Gas Heater, (4) Sureflame 5405 400,000btu Propane/Natural Gas Heaters, (10) Dayton 600,000btu kerosene heaters, (2) Dayton 65,000-85,000btu Propane heaters, (6) Burner Inc. 300,000btu Propane Heaters, (2) Burner Inc. 250,000btu Propane heaters, Koehring NDB1500 150,000btu Heater, Master 150,000btu Kerosene heater, Master 100,000btu Kerosene Heater, 1999 Master Heater B150GT Kerosene Heater, (2) Master Torpedo Heaters, (3) 2008 Enerco Heat Star HS600KT Heaters, (3) LB White CV250 250,000btu Propane Heaters, (2) LB White 155MBH Natural Gas Heater, LB White 150,000btu Heater, Uniflame Blue Rhino 1500 Series 40,000 btu Outdoor Patio Heater, Universal 3500 175,000-350,000btu natural gas heaters, S300 300,000btu Salamander heater, (2) 6400btu Radiant Propane Heaters, ATTACHMENTS: Skid Steers: Atlas Copco TEX180H Hydr. Breaker, 60in. Case Bucket, Shibeci Power Profiler, Hammer, Pallet Forks, Excavators: Unused Grizzly Hydraulic Thumbs, 38in. Esco Bucket, SURVEY EQUIPMENT: David White LS20 Dumpy Level, Michigan Laser LB-1 Laser Level, (2) Michigan Laser RL25, SUPPORT EQUIPMENT: Stihl 2 cycle Power Unit, Target Tile Saws, Stihl Telescopic Pruner, Target Core Drill, Edco Masonry Saw, Shark Steam Cleaner, Crain 500 Junior Carpet Stretcher, WAP Shop Vacuum, Felker Hydrostatic Highway Saw, Edco Floor Stripper, Van Mark 10ft. Aluminum Break, Qty. MBW Plate Compactors, Steam Master & Colonial Wallpaper Steamers, General SP8GH Surface Planer, Telpro Drywall Lift, Michigan Pneumatic 7,000lb. Air Tugger, Landa Preswsure Washer, DriEaz Dehumidifier, Clemco Sandblast Pot, Thomas T30 Pancake Air Compressors, Elliott Grinder, Enerpac 150 ton Jacks, Greenlee Hole Punch Ram, Mopeco and Simplex Rams, Dayton Hydr. Jacks, 2002 Reimann Georger 28ft. Ladder Hoist, Little Wonder Hedge Trimmer, General Super Vee Sewer Snakes, Bosch Sawzall, Bosch Elec. Hammer w/ case, Delta Miter Saw, Bosch Routers & Reciprocating Saws, Orbital Sander, DeWaltCirc. Saw, Milwaukee Palm Sander, WAP turbo vacuum, Atsco Air Grinder, Edco Planer, 8in. Lift Work Winch, Power Rake, Fans, Tanks, Sanitary Floor Buffer, Pipe Threader, Job Boxes, Moving Dollies, Burton Power Snakes: 1/2in. – 3/4in. x 100ft., Porta Crane Cherry Picker, Tow Behind Engine Hoist, Carpet Stapler, Air Tackers, Carpet Stretchers, Shingle Strippers, Chalk Reels, Misc. Hand Tools, Jesco self Dumping Hopper, (14) Wooden Road Construction Signs, Aluminum Extension ladders, Aluminum Step Ladders, 8ft. Elec. Iluminating Signs w/ Letters, (6) Propane Tanks for Forklifts, (8) BBQ Grill Propane Tanks, (14) 68lb. Propane Tanks, Asphalt Lutes, Engine Stand, Concrete Tampers, Kraft Magnesium 10ft. 2in. x 4in. Screed, Pry Bars, Qty. 1 ton – 10 ton Chain falls, Bluebird 1200lb. Porto Crane, Carolina 5000 3 ton Porta Crane, Intec Insulation Blower, Avtron GenSet tester, Jack Stands, Steel Sawhorses, Drill Press, New Bobcat Rubber Tracks, Steel Work Tables, Band Saw, Dewalt Impact Wrenches, Torque Multipliers, 3/4in. Torque Wrench, (7) 5 ton House/ Post Jacks, Bostitch Nailers, Bostitch Finish Nailer, Porter Cable Wood and Quick Drive Screw Guns, Electric Shears, Astro Air Scaler, Paver Breakers,Tubing Benders, Dent Puller sets, Bearing remover & Installer, Bearing Separator Kit, 4x4 Ball Joint Service Set, Valve Cover Kit, Gear Pullers, (2) 100gal. Oil Tanks, Parts Washer, Grease Gun, Jamerco Nail gun, Honda 13hp Motor, Boxes of Safety Harnesses, Hard Hats, Bundles of Misc. Axe, Pick, Shovel & Broom Handles, Floor Scrapers, Lindsay Sandblast Pots, Rigid Pipe machines, Paving Breakers, Qty. of Rolls of PVC Discharge Hose, Rolls of Milled/ Fire Hose, Misc. Strainers, Puddlesucker, Hose Menders, Hose Couplings, Air Hose Fittings & Quick Couplers, Quick Release Cams & Locks, Hose Clamps, (13) New Igloo Industrial Water Coolers, 5 Shelf Rolling Rack- misc. Wood & Fiberglass Ax Handles, (10) Boxes of New 16 ga. PVC coated rebar, Misc. Parts, Filters, Fuel Filters, Flagging Supplies, Boxes of Rubber Boots, HP C4280 All in One Printer-Scanner-Copier, HP J6480 All in One Printer-Scanner-Copier, (2) Compaq Presario Desktop Computers w/ HP W1907 20in., Samsung Cash register, File Cabinets, Steel racks, Microwave Ovens, Multi Line Telephone system, Squeegees, Steel rakes, Steel Hoes, Qty. Square & Pointed Shovels, Hand Cart, Air Horn,Boxes of Disposable Coveralls, Measuring Tapes, Ropes, Lumber Crayons, Drinking Fountain, Wood Splitting Heads, Vermeer Cutting Blades, Rolling Steel Carts, Gas Cans w/ Wheels, Steel Shelving, 18ft. Steel Staircase & Misc. Steel Stairs, Gang Boxes, Rock Drill, Clay Digger, Tampers, Sand Blast Cabinet.

100 *** SPECIALIZED TRAILERS *** 100 The Equipment Trailer & Truck Sale of the Year!

THE HRIBAR CORPORATION FLEET! (Just off lease!) WEDNESDAY, JUNE 22 @ 9:30 AM RACINE (STURTEVANT), WISCONSIN NOTE: Having just returned off of lease 100 excellent specialized trailers, the Hribar Company has decided to sell these trailers at absolute, unreserved auction along with a large group of late model truck tractors. HILITES: 31 TRUCK TRACTORS: (20) 2008 Kenworth T800 (t/a), (10) Peterbilt 379 (triaxle -tandem), 1997 Peterbilt 379 (tri.), 27 EXTENDABLE DETACHABLE TRAILERS: (10) 2009-(6) 2005-(9) 2002 Trailking TK80MED512 40 ton 51ft., 64ft. extended, (t/a), 1999 Trailking TK70MED-482 (t/a), 2000 Trailking TK80MED-483 101,080 GVWR 48ft. (tri.), 9 DETACHABLE GOOSENECK TRAILERS: 1998 Fontaine E654T1CNGB 75 TON w/ 2 axle jeep- 2 axle boggie – 2 axle stinger, 1996 Fontaine 604T1CNGB 60 TON w/ 2 axle jeep – 2 axle boggie – 2 axle stinger, 1990 Trailking TS120MG-602 60 TON w/ 2 axle jeep -2 axle boggie-2 axle stinger, 1999 Trailking, 2003 Witzco RG50 (tri.), 2008-2003 Witzco RG35 (t/a.), 1997 Witzco RG 35 (t/a), 2006 XL Specialized (t/a), 29 EXTENDABLE DROP DECK TRAILERS: 2007 Trailking TK90ES-533 (tri.), (12) 2007 Manac 14353A00 87,083 GVWR 53ft., 75ft. extended (tri.), (2) 2006 Manac 14353A00 76,172 GVWR 53ft., 75ft. extended (tri.), (8) 1999 Fontaine THDFTT-5-4866AWK 108,068 GVWR 48ft. 66ft. extended (tri.), (3) 1997 Fontaine HTDFTT-5-4866AW (tri.), 1996 Fontaine HTDFTT-5-4866AWK (tri.), 1990 Fontaine THDFTT-4-4865A 48ft., 66ft. extended (tri.), 18 DROP DECK TRAILERS: (12) 2006 Trailing TK80ACS533 40 ton 53ft. (tri.), (3) 2001-1999 Fontaine HDFT-5-10048AW, 1999 Fontaine, 2001 Reinke (t/a), 13 EXTENDABLE FLATBED TRAILERS: (7) 2005 Great Dane GPEAR348-80 95,000 GVWR, 48ft., 80ft. extended (tri.), (4) 2000 Great Dane GPEAR348-80 99,000 GVWR 48ft., 80ft. extended (tri.), (2) 1999 Great Dane (tri.), 4 FLATBED TRAILERS: 2000 Great Dane GPMSAR248 (t/a), 1998 Great Dane MWSAR248 (t/a), 1998 Great Dane (t/a), 1999 Fruehauf (tri.), 27 FLIP AXLES: (7) 2009-(10) 2002-(3) 1999-1996-(4)1995 Trailking TK22FA-051, 2006-1996 XL Specialized XL24FA. SITE PHONE: 262-886-2778, SITE FAX: 262-886-2369 REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc. REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon

online bidding available: www.lyonauction.com

online bidding available: www.lyonauction.com 6/11 DAY 1 Directions: From Detroit Metro Airport: slight left toward John D Dingell Dr., continue straight onto John D Dingell Dr .9 miles, take ramp onto Eureka Rd. 5.3 miles. Turn right onto US-24 S/ Telegraph Rd 3.8 miles, left onto Toledo Rd .6 miles . 6/11 DAY 1 ADDRESS: 21588 Dix-Toledo Rd., Brownstown Township, MI 48183. 6/12 DAY 2 Directions: From Detroit Metro Airport: slight left toward John D Dingell Dr., continue straight onto John D Dingell Dr. .9 miles, take ramp onto Eureka Rd 9.8 miles. Right on Fort St. .3 miles- site on right. 6/12 DAY 2 ADDRESS: 15432 Fort. St., Southgate, MI 48195.

DIRECTIONS: From General Mitchell Int’l Airport in Milwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20. Proceed to East Frontage Rd., go South to auction site on left. From Chicago O’Hare Field: (approx. 45 min.), take I-294 N to I-94 N. Proceed to Exit 333, Hwy 20E, continue to East Frontage Road. Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177.

ALEX LYON & SON

Sales Managers & Auctioneers, Inc.

Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com

Page 90 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Racine, WI Fri., June 3, 2011 For: Complete Liquidation of Major Rental Company • Albany, NY Sat., June 4, 2011 For: Construction Equipment, Trucks and Shop Equipment • Manassas, VA Wed., June 8, 2011 For: Job Completion of Late Model Construction, Support Equipment, Trucks & Trailers

• Ledyard, CT (Foxwood Casino) DATE TBA For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers • Dallas, TX DATE TBA For: Late Model Rental Fleet Construction, Support, Attachments, Trucks and Trailers RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• Albany, NY Sat., June 11, 2011 For: Construction, Support, Aggregate Equipment, Dump Trucks

• Nashville, TN June 2, 2011

• Detroit, MI Sat.-Sun., June 11-12, 2011 For: Construction Equipment, Trucks, Trailers, Support and Attachments

• Denver, CO June 7, 2011

• Tampa, FL Wed., June 15, 2011 For: Secured Creditors Auction

• Morrilton, AR June 3, 2011

• Northeast, MD June 7, 2011 • Reno, NV June 9, 2011

Coming Auctions INTERNATIO NA L

CAT AUCTION SERVICES www.catauctions.com 866-750-9432

IRAY AUCTIONS www.iraymn.com 320-968-7230

• Avignon, France June 9, 2011

• Lafayette, LA Tues., June 7, 2011 For: Construction Equipment

• Foley, MN Fri., June 3rd

• Polotitlan, Mexico June 9, 2011

• Denver, CO Tues., June 21, 2011 For: Construction Equipment

• Ocana, Spain June 2-3, 2011

• Panama City, Panama June 17, 2011 • Brisbane, Australia June 21, 2011 • Geelong, Australia June 23, 2011 • Moerdijk, Netherlands June 23-24, 2011 • Moncofa, Spain June 30 – Jul 1, 2011

• Los Angeles, CA Wed., July 20, 2011 For: Construction Equipment • Omaha, NE Wed., July 27, 2011 For: Construction Equipment • Seattle, WA Wed., August 3, 2011 For: Construction Equipment • Grand Rapids, MI Wed., August 17, 2011 For: Construction Equipment

• Atlanta, GA June 9, 2011

• Cancun, Mexico July 7, 2011

• Uniontown, PA Fri., June 17, 2011 For: Secured Creditors Auction

• Las Vegas, NV June 10, 2011

• Caorso, Italy July 14, 2011

• Kansas City, MO June 15, 2011

• Dubai, UAE July 19-20, 2011

• Strong, ME Wed., June 21, 2011 For: Late Model Sawmill, Rolling Stock and Sawmill Equipment

• Olympia, WA June 16, 2011

• Torreon, Mexico August 10, 2011

• Harrison, MI Thurs., June 23, 2011 For: June Contractors Auction

• Atlantic City, NJ Sat., June 18, 2011 For: Heavy Construction Equipment, Forklifts, Aerials, Trucks & Trailers, Attachments, Building Supplies

• Houston, TX June 22-23, 2011

BAR NONE AUCTION www.barnoneauction.com 866-372-1700

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087

• Sacramento, CA Sat., June 11, 2011 For: Construction Equipment

• Prospect, CT Sat., June 25, 2011

• Houston, TX Wed., June 21, 2011 For: Large Job Completion Auction of Construction Equipment

• Bellevue, IA June 27, 2011

• Racine, WI Wed., June 22, 2011 For: Construction Equipment, Trucks and Trailers • Queratero, Mexico Fri., June 24, 2011 For: Late Model Construction Equipment, Attachments, Trucks and Trailers • Buffalo, NY Sat., June 25, 2011 For: Late Model Rental Returns of Primarily New Holland, Construction Equipment, Attachments, Trucks & Trailers • Bangor, ME Sat., July 9, 2011 For: Construction, Support Equipment, Trucks and Trailers • Rochester, NY Sat., July 9, 2011 For: Late Model Dump Trucks, Truck Tractors, Equipment Trailers, Construction Equipment, Aerials & Forklifts • Canastota, NY Sat., July 16, 2011 For: Lyon’s Annual Summer Hay Camp & Friday Night BBQ. Late Model Construction, Support, Aerial Lifts, Trucks and Trailers • Detroit, MI Sat., August 7, 2011 For: Construction and Ag Equipment, Support and Vehicles

• Minneapolis, MN June 17, 2011

• Columbus, OH June 23, 2011 • Albuquerque, NM June 24, 2011

• Pittsburgh, PA June 27, 2011 • Phoenix, AZ June 28, 2011 • Jackson, MS June 29, 2011 • Salt Lake City, UT June 29, 2011 • Statesville, NC June 30, 2011 • St. Louis, MO June 30, 2011 • Spokane, WA June 30, 2011 • New Orleans, LA July 15, 2011 • Frederick, MD July 19, 2011

• San Bernardino, CA Sat., June 25, 2011 For: Construction Equipment

• San Bernardino, CA Fri., July 22, 2011 For: Construction Equipment

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Sacramento, CA Sat., August 13, 2011 For: Construction Equipment • San Bernardino, CA Sat., August 27, 2011 For: Construction Equipment • Sacramento, CA Sat., September 10, 2011 For: Construction Equipment • San Bernardino, CA Fri., September 23, 2011 For: Construction Equipment

CA NA DA

• San Bernardino, CA Sat., October 22, 2011 For: Construction Equipment

• Saskatoon, SK June 23, 2011 • Toronto, ON June 28, 2011 • Grand Prairie, AB June 29, 2011 • Regina, SK July 13, 2011 • Saskatoon, SK August 4, 2011

• Prospect, CT Sat., October 15, 2011 • Prospect, CT Sat., December 10, 2011

• Sacramento, CA Sat., October 8, 2011 For: Construction Equipment

• London, ON June 21, 2011

• Prospect, CT Sat., August 20, 2011

• Sacramento, CA Sat., July 9, 2011 For: Construction Equipment

• Lo Angeles, CA July 22, 2011

• Edmonton, AB June 15-16, 2011

DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670

• Sacramento, CA Sat., November 12, 2011 For: Construction Equipment • San Bernardino, CA Thurs., November 17, 2011 For: Construction Equipment • Sacramento, CA Sat., December 10, 2011 For: Construction Equipment • San Bernardino, CA Fri., December 16, 2011 For: Construction Equipment

• Pendleton, IN Fri, June 17, 2011 For: 19th Annual Summer Construction Equipment Auction G.W. McGREW AUCTION COMPANY www.mcgrewequipment.com 717-428-0922 • Seven Valleys, PA Mon, June 13, 2011 For: Construction and Farm Equipment • ONLINE ONLY Fri, June 17, 2011 For: Construction and Farm Equipment HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • New Paltz, NY Sat., June 11, 2011 For: Surplus Construction Equipment from Central Hudson Gas and Electric • Johnstown, PA Thurs., June 16, 2011 For: Construction Equipment • Telford, PA Wed., June 22, 2011 For: Construction Equipment

• Johnson Creek, WI Fri., July 22, 2011 • ONLINE ONLY Fri., August 5, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., August 19, 2011 • Foley, MN Fri., September 16, 2011 • Portage, WI Fri., October 14, 2011 • ONLINE ONLY Fri., November 4, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., November 18, 2011 • Foley, MN Fri., December 2, 2011 IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Wed., June 1, 2011 For: Construction Equipment • Thurs., June 2, 2011 For: Construction Equipment • Wed., June 8, 2011 For: Construction Equipment • Thurs., June 9, 2011 For: Construction Equipment • Wed., June 15, 2011 For: Construction Equipment • Thurs., June 16, 2011 For: Construction Equipment • Wed., June 22, 2011 For: Construction Equipment • Thurs., June 23, 2011 For: Construction Equipment • Fri., June 24, 2011 For: Construction Equipment

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Bay Springs, MS Sat, June 4, 2011 For: Farm & Equipment Auction • Rockmart, GA Tues, June 7, 2011 For: One Owner Absolute Auction • Pelzer, SC Fri.-Sat., June 15-16, 2011 For: Annual Summer • Brooklyn, MS Wed.-Thurs, June 17-18, 2011 For: Construction & Farm Equipment, Trucks & Autos • Newberry, SC Wed., August 17, 2011 For: One Owner Absolute Auction MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311 • Canton, OH Mon., June 6, 2011 For: Assets From Large Rental Operation • Tampa, FL Wed., June 15, 2011 For: Crane Rental and Heavy Haul Operation • Elizabeth, PA Fri., June 17, 2011 For: Construction Equipment • Magnolia, TX Tues., June 21, 2011 For: Construction Equipment PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.co m 860-642-4200 • Islip, NY Fri., June 3, 2011 For: Marine Construction and Excavation Equipment, Trucks and Trailers • Fitzwilliam, NH Fri., June 10, 2011 For: Late Model, Well Maintained Heavy Equipment PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Thurs., June 30, 2011 For: Construction Equipment

• ONLINE ONLY Bidding Starts to Close Wed., June 1 - 10AM For: Midwest Construction Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008

• ONLINE ONLY Bidding Starts to Close Wed., June 8 - 10AM For: Oklahoma and Texas Equipment Auction

• Kenmore, WA Sat., June 11, 2011 For: Construction Equipment, Trucks, Trailers and Tools J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Wed.-Fri., June 8-10, 2011 For: Construction Equipment • Montgomery, AL Fri.-Sat, June 24-25, 2011 For: Alabama Dept. of Transportation

• ONLINE ONLY Bidding Starts to Close Tues., June 14 - 10AM For: Government Equipment and Vehicle Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

• Lebanon, TN September 17, 2011 For: Construction Equipment • Lebanon, TN December 10, 2011 For: Construction Equipment RYAN AUCTION SALES www.ryanauctionsales.com 603-491-6159 • Virtual Equipment and Truck Auction Tues., June 14, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., June 30, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., July 21, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., August 18, 201110AM • Virtual Equipment and Truck Auction Tues., Sept. 6, 2011-10AM • Virtual Equipment and Truck Auction Thurs., Sept. 22, 2011-10AM • Virtual Equipment and Truck Auction Tues., October 11, 201110AM • Virtual Equipment and Truck Auction Thurs., October 27, 201110AM • Virtual Equipment and Truck Auction Thurs., Nov. 17, 2011-10AM • Virtual Equipment and Truck Auction Thurs., Dec. 15, 2011-10AM STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • Online Auction Bidding Closes Tues., May 31, 2011 For: Construction Equipment • Alexandria, MN Wed., June 8, 2011 For: Construction Equipment • Online Auction Bidding Opens June 4 and Closes June 14, 2011 For: Construction and Ag Equipment, Vehicles and More! • Litchfield, MN Thurs., July 14, 2011 For: Construction and Ag Equipment, Vehicles and More! • Montgomery, MN Fri., July 22, 2011 For: George Ohmann Antique Tractor Auction • West Fargo, ND Wed., July 27, 2011 For: Construction and Ag Equipment, Trucks, Vehicles and More

• Lebanon, TN June 4, 2011 For: Construction Equipment

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 760-731-7760

• Pine Knot, KY June 18, 2011 For: Construction Equipment

• Perris, CA Tues.-Wed., June 7-8, 2011 For: Construction Equipment

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 91

CONSTRUCTION, TRUCK & FARM EQUIPMENT AUCTION Virtual Auction Friday, June 17th • 10:00 A.M. EDT

ated ems Loc Many It Miles of the 0 within 6 Baltimore. Port of Crawler Loaders & Dozers: Cat D8T CSA-R, EROPS, Air 3100 Hrs, Ripper, New SALT Bottom, GPS System, ’06 Very Nice Cat D5C LGP, Series III, 3400 Hrs Cat 963C LGP, EROPS, Air Cat 955, EROPS, 3rd Valve Cat 953, EROPS Case 855C, 4in1 Bucket

G.W. MCGREW AUCTION CO. EXPECTING 60+ TRUCKS, TRACTORS, DOZERS, BACKHOES, SKID STEERS AND MORE! SELLING FOR LOCAL CONTRACTORS, FARMERS, AND DEALERS. INCLUDING CONSIGNMENTS FROM MD & PA CONTRACTORS HTI, GREAT MILLS TRADING POST, FLOHR POOLS. CALL NOW TO CONSIGN UNBELIEVABLY LOW FLAT RATE LISTING FEE!!

Scrapers: “2” Cat 672G, EROPS, Air, 6300 & 6800 Hrs, ’04 Very Nice “2” Cat 627 Cat 621G, EROPS, Air, 4300 Hrs, ’04 Super Nice Cat 615, EROPS, Air “2” Fiat Allis 260B

Trailers: ’09 Kauffman 24’, T/A, 14000 GVWR

Graders: Cat 12 Dresser A450E, EROPS, Scarifier JD 570A, EROPS

Backhoes: JD 310G, 4x4, 3rd Valve

Tractor Loaders: Case 480LL

Excavator: Cat 225 Gradall 660E

Road Tractors: ’99 IHC 9200, T/A, Cat 3406, Sleeper, Wet Kit ’99 IHC 2574, T/A, Cummins, Municipal Vehicle ’96 IHC 9200, Detroit, 72” Sleeper 96 Mack CH313, Mack Power ’00 Kenworth T2000, Cat C-15, 72” Sleeper, 10 Speed, 183K Miles ’05 Peterbilt 387, T/A, Cat C-15, 72” Sleeper ‘’95 Volvo WG64T, TA, Cat 3176

Forklift & Telehandlers: JD 480C

Utility Vehicles: Cushman Truckster, Hyd Dump

Compactors: Cat 815F, EROPS, Air, 2900 Hrs, Blade, ’06 Very Nice Cat 815F, EROPS, Air, Blade, Nice Skid Steers: Toyota CH7 Wheel Loaders: Cat 980B

Lifts: Genie S60, 4x4, Nice Genie GS2632, New Batteries, ’06 Model Trucks: ’05 Chevy 2500HD ’98 Chevy 3500HD, Flatbed ’97 Chevy 3500, Dually ’94 Dodge 3500, 5th Wheel ’05 Ford F250, 4x4 Utility Body ’04 Ford F250, 4x4 ’99 Ford F800, Dump ’99 Ford F350, Cube Van ‘98 Ford LT9000, 3/A Dump, Cat Diesel

Do Not Miss Out! G.W. McGrew Auction Company announces its first virtual online Construction and Farm Equipment Auction. We are expecting over 60 dozers, pans, skid steers, tractors, backhoes, and more. We have many great consignments from local MD & PA contractors including HTI, Great Mills Trading Post, and Flohr Pools. Items are being added to the auction daily. Expect lots of unadvertised items. Consignments are accepted, and offer an unbelievably low flat rate listing fee. This is a very early listing so check out our web site at www.mcgrewequipment.com for pictures, videos and updates. Not responsible for No Shows. All announcements auction day supersede all printed material. Internet bidding available at www.EquipmentFacts.com

Live Internet Bidding at www.EquipmentFacts.com

Ple out ouar se check w www.m cgreweqebsite at

’97 Ford, L8000, S/A Dump 1250BT Crane, T/A ’97 Ford F350, 7.3L Diesel, Crew Cab ’95 Ford F350, 7.3 Diesel Crew Cab ’94 Ford F150 ’90 Ford F700, Flatbed Dump ’90 Ford F350, Diesel, Utility, Snowplow ’89 Ford L8000, Dump ’88 Ford L9000, T/A Dump ’88 Ford LN8000, Cab & Chassis, Air Breaks ‘85 Ford Crane Truck, Cat 3208 Diesel, JLG Crane ’01 Freightliner FL70, Dump, Cat 3126 ’01 GMC 2500HD, 4x4, Crew Cab ’98 GMC 3500HD, Utility, Snow Plow ’89 GMC 7000, Cat 3208 Diesel, IR 175 Compressor ’88 GMC General, T/A Dump, Nice 1 Driver ’95 GMC 6500, S/A Dump

uipmen

t.com

’96 IH Bus, 72 Passengers ’95 IH 4700, Altec Digger & Utility Body ’93 IH 4700, Utility Body & Crane ’84 IH DT466, Flatbed ’99 Mack RD6885, T/A Dump ’89 Mack CS300, Lube Truck ’87 Mack R686, T/A Dump ’95 Thomas Bus, 72 Passenger Misc. Construction: DW JetTrac JT 560, 956 Hrs, w/ Trailer Elgin-Pelican, Street Sweeper, Dual Steer, Hydro Gardner Denver SCH2500, Track Drill, Cummins Diesel Gardner-Denver Air Track Drill, Detroit Diesel IR 185, Air Comp, 313 Hrs, Municipal Machine Onan Gen Set, Propane, 45 EM “3” Wacker LTC-4, Light Tower, 800-1200 Hrs Wacker RT820, Trench Roller

This is a Very Early Listing, Consignments Wanted, Call a McGrew Representative Now 2191 Seven Valleys Road Seven Valleys, Pa 17360 717-428-0922 or 888-311-2811 WWW.MCGREWEQUIPMENT.COM SCOTTZYLKA@MCGREWEQUIPMENT.COM

19th ANNUAL SUMMER AUCTION FRIDAY, June 17TH, 2011 DSA Auction Complex 6531 S. St. Rd. 13 PENDLETON (INDIANAPOLIS) INDIANA (1 Mile North of I-69 @ Exit 14) Selling Equipment For: Star Financial Bank, WRS Compass, Ray’s Trash Service, Gradex, Inc., & Central Engineering Construction, along with other Local & Regional Contractors, Banks, Lending Institutions and Rental Companies EXCAVATORS: ‘08 Komatsu PC200LC-8, 610 Hrs., PC650LC-5, ‘01 Volvo EC210LC, Deere 160LC, ‘01 120 & ‘00 80, ‘05 Cat 314CLCR, 2-‘02 Cat 308C, Yanmar B50, Gehl 502, Attachments: ‘05 Kent Hydraulic Hammer, (2) ‘10 Excalibur X36 Thumb, Cat 330 Quick Coupler, Several Buckets, CP Thumb, CRAWLER TRACTORS: Case 1650K LGP Series II, 1410 Hrs., Deere 850C LGP, ‘84 450D, ‘80 Dresser TD8G, CRAWLER LOADERS: Komatsu D66S-1 & Case 455C, LOADER BACKHOES: ‘04 Case 580M Series 2, 580K, ‘96 New Holland 675E, JCB 3C, ‘95 Deere 310, Bobcat 2400, SKID LOADERS: ’06 Deere CT332, ‘05 Cat 247B, ‘08 Cat 226B SERIES 2, ‘05 252B, ‘04 Bobcat T190, ‘04 S220, S185, ‘97 763H, New Holland 190B & LX865, ‘00 Mustang 2050, 2-Case 1845C, Attachments: 5-Pallet Forks, 2-Pallet Fork Frames, 4-66" & 72" Smooth Buckets, 2-Snow & Mulch 78" Buckets, 2-Stump Buckets, 2- BD Tree Boomers, 2-72" Rock Buckets, Stump Bucket, 2-66" Grapples, Bobcat Rockhound, Bobcat Broom, Bobcat Sweeper Box, CONCRETE TRIMMER: CMI TR225B Trimmer, COMPACTION EQUIPMENT: Champion 722 Smooth Drum, ‘90 Case D602PD Padfoot, Rammax P51 Padfoot, Ingersoll Rand DD24, DD32 & DX-70E, TRACTORS: ‘05 Kubota L4630GST Utility, Cab A/C, 1,700 Hrs., ‘04 Kubota L48, L2550 Utility, 3 Pt. Box Grader, 3 Pt. Bush Hog, 3 Pt. 48" Rototiller, TRENCHERS & FORKLIFTS: ‘05 Vermeer T455, 833 Hrs., Vermeer V7550, Vermeer M455A, Ditch Witch R65, Gehl 883 Telescopic, Toyota 5FBCU25 Forklift, HYDRAULIC TRUCK CRANES: Grove RT60S Rough Terrain Crane, Drott 3330B Carry Deck Crane, SCRAPERS: ’80 Deere 860A, ‘73 Cat 613, GRADERS: ‘00 Volvo 720AVHP, Cab A/C, Cat 12G, One Owner, HAUL TRUCKS: ‘95 Terex 3066C, Back-up Camera, ‘84 Euclid 25 Ton, ’82 & ‘84 Mack RD492S, One Owner, RUBBER TIRED LOADERS: ‘04 New Holland LW190B, ‘00 LW230, One Owner, ‘97 Dresser 515CH, Volvo VME L70, Case W14, Trojan 2000, Fiat Allis 545, Attach: Cat 4&1 Bucket, Quick Attach Forks, Telescopic Boom, SCREEN MACHINE: Thomas Pro Screen 400 Screen Machine, 85 Hrs., TRUCK TRACTORS:‘02 Peterbilt 379, Cat

C16 w/ 600HP, Tri Axle, ‘97 Mack CH613, ‘91 Kenworth T800, Tandem, ‘87 Peterbilt 359, Cummins Western 8' 6" Snow Plow, Spectra Precision LL500, Laser Alignment LB 10, Laser Plane 500, 2400HP, Tandem, ‘82 Ford L8000, Single, DUMP TRUCKS: ‘05 Sterling Tri Axle, Mercedes Diesel, Miller 225NT Welders, Sullivan Palatek 185 Air Compressor, ‘96 Palfinger PF3700 Knuckle Boom, 279K Miles, ’04 & ‘05 Kenworth T800, Tri Axle, 385 Cummins ISM Diesel, 285K & 202K Miles, ‘90 MISCELLANEOUS: 6-Unused Easy Kleen Magnum 4000 Hot Water Pressure Washers, 2-Unused International 2674, Tri Axle, ‘88 Mack RD690S, Tri Axle, ‘95 Peterbilt 379, Tandem, ‘77 Ford L9000, Lifan 15HP Gas Motors, Unused Easy Kleen TM30 Plate Tamper, 2-Easy Kleen TM350 & TMH30 Tandem, ‘90 Mack RD690, Single Axle, ‘86 International 1954, Single Axle, SPECIALITY Reversible Plate Tampers, 2011 Easy Kleen TMR70 Jumping Jack, Gidding Soil Sampler, Several Trash TRUCKS: ‘07 Chevrolet T7500 Box Truck, Duramax Diesel, Single Axle, 93K Miles, ‘01 Ford Pumps, 2-Lincoln Shield Art SAE 300 Welders, Chop Saw, Lincoln 250-G9P Welder, Husqvarna 272 F650 Service Truck, Cummins, w/ Compressor, Fertal G2-8H Hydraulic Crane, ‘92 Int. 4900 Service Concrete Saw, Plus Much, Much more, please watch www.dsaauctions.com. Truck w/ Auto Crane, ‘89 Ford F 700 Service Truck, ‘94 Ford F350 Service Truck, w/Compressor & Liberator 4000 Auto Crane, ‘89 GMC 50’ Bucket Truck, ‘90 Int. Paystar Can’t Make it to the Auction? 5000 Boom Truck, c/w Manitex 1161 Crane, ‘88 GMC Boom Truck, c/w National Crane, BID LIVE ONLINE! 8 Ton, 56' Boom, ‘85 Chevrolet 70 Utility Truck, ‘87 Int. S1854 Flatbed Truck, ‘84 Mack 686ST Water Truck, ‘07 Int. 4300 Cab & Chassis, DT466, Automatic, 24,400 Miles, ONE Register for this auction on proxibid.com TON TRUCKS & DOWN: ’00, ’01 ***NOTE: RUNNING THREE (3) RINGS*** & ‘05 Ford F450 Flatbed, ‘94 Ford RING 1 @ 8:00 A.M. • RING 2 @ 8:30 A.M. • RING 3@ 12:00 P.M. F450 Service Truck, c/o Compressor, Crane, Generator, ‘05 Ford F350XL Service Truck, ‘98 Chevrolet 3500 Sale Site Phone: 765-778-9277 – Ask For Mark or Scott Pickup, ‘03 GMC 2500 Pickup, ‘00 Terms: Complete Payment on Sale Day – Payment May Be Made By Cash or Check. Chevrolet 1500 Pickup, ‘00 GMC 1500 *ALL CHECKS MUST HAVE CURRENT BANK LETTER GUARANTEEING FUNDS* Pickup, LOWBOY TRAILERS: ’05 Liddell 55 Ton, Tri Axle Set Up For 4th Axle, 26' BUYERS PREMIUM: 1% on each item $2,501 & greater Deck, Set Up For 26’ Beam Deck and 4th Axle, ‘81 Landoll 35 Ton 48' Double Drop, ‘71 10% on each item $2500 & less Rogers 35 Ton, DUMP TRAILERS: ‘04 Warren 28’ Alum. Dump Trailer, 20' Alum. Auctioneers: Don Smock – Lic. #AU09200016 Dump, ‘84 Monon 28' Van, 30' Van, TAG TRAILERS: ‘89 Eager Beaver 15 Ton Tag, ‘83 Dynaweld 12 Ton Tilt Top Tag, Interstate 40 DLA Tag, ‘91 Belshe T-9 Tag, ‘08 Load Nic Smock – Lic. #AU10500037 Trail 14,000# Tag, ‘09 Load Trail 77x12 Tag, 4 Place Wave Runner Tag, Hurricane Deck Sale Arranged & Conducted By: Boat, Johnson Electromatic 40 HP Outboard Motor with Trailer, TOYS: ’06 Polaris 500, 106 Miles, 2-‘05 Harley Davidson Road King & Ultra Motorcycles, ‘83 Chevrolet El Camino, 23,470 Miles, ‘96 Kawasaki 900 Wave Runner, ‘94 Ski Doo 1000 Wave Runner, VARIOUS: McPearsons 20' Portable Air Curtain, 500 Gallon Seal Coat Tank, Several Whiteman 6531 S. State Road 13 • Pendleton, IN 46064 Concrete Trowel Machines, 2- Edco SS-35 Concrete Saws, 2-Soft-Cut GX4000 Concrete Saws, E-mail: rstinger@dsaauctions.com • Web Site: www.dsaauctions.com

DON SMOCK AUCTION CO., INC.

Page 92 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASSE Announces Society-Wide Board Election Results In what was described as the second highest member turnout in the past 10 years, members of the American Society of Safety Engineers (ASSE) elected new members to its board of directors for the 2011-2012 year during the annual elections, which concluded the end of March. The newly elected members and re-elected incumbents to the ASSE board will join President-Elect Terrie S. Norris of Long Beach, Calif., and Richard A. Pollock of Minneapolis, Minn., who will succeed to the offices of president and president-elect, respectively, July 1, 2011. Norris will succeed Darryl C. Hill as ASSE president. ASSE members elected Kathy A. Seabrook of Mendham, N.J., as senior vice president; re-elected Thomas F. Cecich of Apex, N.C., as vice president for professional affairs; re-elected Patricia M. Ennis of Denver, Colo., as vice president for professional development; re-elected Martin P. Jeppeson of Stockton, Calif., as Region I vice president; elected G. Alan Brown of Port Arthur, Texas, as Region III vice president; re-elected Maribeth A. Anderson, of Chicago, Ill., as Region V vice president; and, re-elected Stephanie A. Helgerman of Columbus, Ohio, as Region VII vice president. Set to serve in the position of area director, a non-board position, include Michael F. Lorenzo of Denver, Colo., Region II Colorado area director; Brett T. Beoubay of Baton Rouge, La., as Region IV Louisiana area director; Barbara R. Cooksey of Clearwater, Fla., as Region IV S. Florida area director; Richard M. Slinkard of Pittsburgh, Pa., Region VIII Keystone area director; and, Frank P. Gesualdo of Roseland, N.J., as Region VIII Metropolitan area director. The area director races were uncontested this year. Each elected member will step into their new roles this July 1, but will be sworn in at the June 12 ASSE House of Delegates meeting to be held during the ASSE Professional Development Conference and Exposition in Chicago at McCormick Place. As president and chief elected officer, the ASSE president promotes occupational safety and health, the

occupational safety health and environmental profession, and represents the members and the Society worldwide. Norris is the risk control manager of Bickmore Risk Services and has more than 21 years of experience in SH&E in the recycled paper, rubber and plastics, and metal forming industries, and in insurance and consultation. An ASSE member since 1987, she has served as Region I vice president and as Orange County chapter president, president-elect, treasurer and delegate. Norris also served the society as council on member and regional affairs deputy chair; diversity committee chair; on the strategic planning committee; the compensation committee; the 100th anniversary task force; women in safety engineering advisory committee; as management practice specialty webmaster; and, at the chapter stars task force chair — working to salute and recognize volunteer efforts that go above and beyond. An ASSE Foundation champion donor, Norris helped develop and fund the society diversity committee scholarship. She also assisted in the development of safety specifications for public playground equipment as a member of ASTM and was honored with the manager of the year recognition from Poms and Associates; regional and chapter Safety Professional of the Year (SPY) awards; and received the ASSE Culbertson honor. Pollock, president of CLMI Safety Training of Minneapolis, Minn., has been an ASSE member for more than 36 years. Pollock’s professional experience includes working as corporate SH&E director at Medtronic; as corporate director of safety and risk for Clark Oil and Refining along with working for companies in the consumer goods, heavy manufacturing and insurance loss control industries. At CLMI he has produced more than 500 education courses used worldwide. For ASSE, Pollock chairs the 100th anniversary task force and has served as the vice president of the council on professional development, chair of the annual professional development conference, chapter officer, and several committees and practice specialty groups. He is the recipient of the ASSE Culbertson award, the

President’s Award and the Northwest Chapter SPY award. Newly elected Senior Vice President Kathy A. Seabrook is president of Global Solutions Inc., a global SH&E management consultancy for multinational companies. She has been a member of ASSE for more than 30 years. Having served two consecutive terms on the ASSE board of directors as vice president for council on practices and standards, she currently chairs the ASSE Council on Professional Affairs Sustainability Task Force, the Council on Member and Region Affairs Global Committee as well as the International Practice Specialty (IPS) and Women in Safety Engineering (WISE) international membership committees. Past ASSE service includes working on the strategic planning, bylaws (chair), PDC planning, business of safety and admissions committees. She is the recipient of ASSE’s International Practice Specialty SPY, ASSE President’s and Charles V. Culbertson Outstanding volunteer service awards and the British Institution of Occupational Safety and Health’s (IOSH) distinguished service award. Vice President for Professional Affairs Thomas F. Cecich and Vice President for Professional Development Patricia M. Ennis were re-elected. Cecich is president of TFC & Associates, a safety, health and environmental management consulting firm. Previously he was vice-president EHS Global Business Support at GlaxoSmithKline and worked at IBM and Allied Chemical. Cecich is a 40year member of ASSE and has served as N.C. chapter past president, on the ASSE government affairs, strategic planning, professional development conference, educational standards and public relations committees and as an ASSE Foundation trustee. Ennis is director of workplace safety at the Denver Zoological Foundation, Denver, Colo., and former ASSE region II vice president. Ennis has worked as a safety manager for a multi-state utility contractor and as a loss control specialist for an insurance carrier. She has served in all leadership roles for the Colorado chapter. The re-elected regional vice presidents include Region I Vice President

Martin P. Jeppeson director of regulatory affairs for the California Ammonia Company (CALAMCO), of Sacramento, Calif. Jeppeson has more than 25 years of experience in the safety arena. Before joining CALAMCO he was the safety manager for Erickson Inc., in Richmond, Calif. An ASSE member since 1992, he has held several chapter positions including programs chair, vice president, president-elect, two terms as president and as chapter delegate. Newly elected Region III VP Alan Brown is a health supervisor for Total Port Arthur Refinery, Port Arthur, Texas. His refinery experience includes plant-wide safety, health and industrial hygiene responsibilities for the 270,000-barrell-per-day facility. He also is responsible for contractor safety and orientation management. Brown has been a member of ASSE since 1976 and is a member of the Industrial Safety Training Council, the American Industrial Hygiene Association (AIHA), the National Petroleum Refiners Association and the Golden Triangle Business Roundtable Safety Committee. He was a member of the ASSE Imperial Calcasieu Chapter and received the Sabine Neches Chapter SPY award in 2005 where he was past president and now serves on the executive committee. Region V Vise President Maribeth A. Anderson is EHS supervisor for Jacobs Engineering in Chicago and was the former Greater Chicago chapter president. She has worked in the field of safety since 1994. An ASSE member since 1997, she has served at the chapter, region and society levels. In 2008, she received the Greater Chicago chapter SPY award and the region SPY award in 2009. Region VII VP Stephanie Helgerman is an associate manager of BGB, of Columbus, Ohio. Helgerman has been in the safety field for more than 25 years and provides direct support services to technical staff in the U.S. and overseas. A professional member of ASSE since 1992, she received the SPY honor for the state of Ohio and region VII in 2002. Continuing on the board as ASSE Council leaders are ASSE vice president for Finance James D. Smith the director of risk control, southeast region risk control services, for Arthur

J. Gallagher Risk Management Services in Boca Raton, Fla., and ASSE Vice President for Practices and Standards George W. Pearson of Manakin Sabot, Va., the corporate safety director for Carpenter Co. in Richmond, Va. Continuing on the board as regional vice presidents are Region II VP James G. Gallup, P.E of Phoenix, Ariz., a fire protection engineer for AON Fire Protection in Tucson, Ariz.; Region VIII Vice President Robert E. McClay of Indiana, Pa., Emeritus Professor of Safety Science (retired) Indiana University of Pennsylvania (IUP); Region IV Vice President Michael Belcher Director of Safety — DS Waters of America LP; and, Region VI Vice President Vincent R. Miller, Jr of Manassas, Va., president of Miller Safety Consultants Ltd. ASSE members Lorenzo, Beoubay, Cooksey, Slinkard and Gesualdo will step into the role of ASSE area directors. The role of the area director is to help each chapter be successful for the benefit of the members. Lorenzo is a construction safety consultant for Pinnacol Assurance Co. out of Denver, Colo. Beoubay is the loss prevention manager for the State of Louisiana where he oversees the state’s safety audit and training programs for all 100,000 plus state employees. Cooksey is a loss control consultant for Bouchard Insurance Agency, Clearwater, Fla., where she assists her commercial clients with their safety efforts by providing such services as: review of existing programs, providing safety program templates, mock OSHA and DOT inspections, employee and supervisor training on a number of topics chosen by her clients, site safety inspections. Slinkard co-founded CIH Services Inc. in 1992 and has provided a wide range of EHS consulting services in 42 states and 12 countries. Gesualdo is a senior service director for Liberty Mutual Insurance Co. He is responsible for managing service to the Commercial Market’s Construction Wrap-up and Energy books of business and selected large National Market customers. For more information please go to www.asse.org.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 28, 2011 â&#x20AC;˘ Page 93

MYRON BOWLING "Y /RDER OF 3ECURED #REDITOR

#2!.%ĂĽ2%.4!,ĂĽ ĂĽ(%!69ĂĽ(!5,ĂĽ/0%2!4)/. WEDNESDAY, JUNE 15th at 10AM ĂĽ(ARNEYĂĽ2OADĂĽINĂĽ4AMPA ĂĽ&LORIDAĂĽ Inspection: Monday, 6/14/11 from 9AM to 4PM

'2/6% 4ON 4RUCK #RANE p '2/6% 24 " 4 p 4%2%8 4 4 p 4%2%8 4 4 p ,/2!). ,# 4 p ,/2!).% 4 p ,/2!). 4 p 0LUS 4RUCK 4RACTORS p "OOM 4RUCKS p 3ERVICE 4RUCKS p 42!),+).' UP TO 4ON ,OWBEDS p 1UANTITY OF ,"$ 4 /IL &IELD ,OWBOY 4RAILERS p *EEPS p $OLLIES p %XTENDABLE 4RAILERS p 3TEP $ECKS p #,!2+ LB &ORKLIFT &LORIDA !UCTION ,ICENSE -YRON # "OWLING !5

4/.3

FRIDAY, JUNE 17th at 10AM

2OUTEĂĽ ĂĽINĂĽ7ESTĂĽ%LIZABETH ĂĽ0ENNSYLVANIAĂĽ Inspection: Thursday, 6/16/11 from 9AM to 4PM

4RUCK 4RACTORS p /IL &IELD 4RAILERS p $OLLIES p *EEPS p %XTENDABLE 4RAILERS PLUS MANY MOREĂ&#x2DC; 0ENNSYLVANIA !UCTION ,ICENSE -YRON # "OWLING !5 2 -YRON "OWLING !UCTIONEERS )NC !9 ,

Thursday, June 23, 2011 â&#x20AC;˘ 9:00 AM

,ARGE *OB #OMPLETION

TUESDAY, JUNE 21st at 10AM

ĂĽ&-ĂĽ ĂĽINĂĽ-AGNOLIA ĂĽ4EXASĂĽ ĂĽ NEARĂĽ(OUSTON )NSPECTION -ONDAY FROM !- 0-

).4%2.!4)/.!, 4RI !XLE 4RUCK p 4%2%8 4 4ON #RANE p '2/6% 4ON '-+ " #RANE p 42!),-/"),% 3TEP $ECK 4RAILER -UCH -ORE 4EXAS !UCTION ,ICENSE -YRON # "OWLING !5#4.2

â&#x20AC;˘ Heavy Equipment â&#x20AC;˘ Logging Equipment â&#x20AC;˘ Trucks & Trailers â&#x20AC;˘ Utility Trucks

& More! Located 110 Miles North of Lansing off US-127. Take 2nd Harrison Exit 176, then East on Arnold Lake Rd. Follow Auction Signs.

If you have a fleet of equipment or just 1 item to sell Call Darell Dunkle Today! 1-800-433-6670

-YRONĂĽ"OWLING !UCTIONEERSĂĽ)NC

0 / ĂĽ"OXĂĽ ĂĽsĂĽ2OSS ĂĽ/(ĂĽ

ĂĽ

WWW MYRONBOWLING COM

TERMS: #ASH OR COMPANY CHECK "UYER S 0REMIUM /NSITE /NLINE

Visit www.myronbowling.com FOR COMPLETE DETAILS

www.dunkleauctioneers.com E-Mail: info@dunkleauctioneers.com Darell Dunkle 989-429-5336 Greg Zuiderveen 231-846-1201

Page 94 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SON INC RACINE WI .......................................................................................85 DETROIT MI / RACINE WI ...............................................................89 ALEX PARIS CONTRACTING CO INC .....................................................9 ALLU GROUP ..........................................................................................29 AMERICAN STATE EQUIPMENT............................................................11 ARING EQUIPMENT CO INC..................................................................23 BARGAINS...............................................................................................78 BODINE MFG ..........................................................................................34 BRANDEIS...............................................................................................28 CAT AUCTION SERVICES LAFAYETTE ......................................................................................87 CEC..........................................................................................................40 CEG SCALE MODELS ............................................................................24 CHICAGO PNEUMATIC ..........................................................................33 CK POWER..............................................................................................12 CLASSIFIEDS..........................................................................................79 CONSTRUCTION EQUIPMENT GUIDE AIR COMPRESSOR PROMO ..........................................................77 SHOPPING FOR USED EQUIPMENT .............................................56 WANTED...........................................................................................81 PLANNING AN AUCTION.................................................................84 MORE VALUE FOR YOUR ADVERTISING .....................................65 DARELL DUNKELL & ASSOC HARRISON MI ..................................................................................93 DEAN MACHINERY CO ..........................................................................17 DODGE OF BURNSVILLE ......................................................................73 DOLPHIN TANKER SYSTEMS................................................................12 DON SMOCK ...........................................................................................91 DOOSAN INFRACORE AMERICA CORP..........................................54,55 DOOSAN PORTABLE POWER ...............................................................50 DOPPSTADT ...........................................................................................46 DURATECH .............................................................................................44 DYNAPAC ................................................................................................62 ELLIOTT MACHINE WORKS INC ...........................................................70 ERB EQUIPMENT ...................................................................................48 EXODUS MACHINES ..............................................................................39 FABCO EQUIPMENT INC .........................................................................7 FABICK CAT .......................................................................................13,41 FARM-RITE EQUIPMENT INC ................................................................21 FCC EQUIPMENT FINANCIAL................................................................28 FELLING TRAILERS................................................................................69 FINKBINER EQUIPMENT CO .................................................................11 FLANGE LOCK ........................................................................................26 FLEET EQUIPMENT CENTER................................................................76 FLUID CONTROL SERVICES .................................................................26 FURY MOTORS.......................................................................................76 GARY CARLSON EQUIPMENT ................................................................8 GRINDERCRUSHERSCREEN.COM ......................................................42 GROVE WORLDWIDE ............................................................................64 HOWELL TRACTOR & EQUIPMENT CO ..........................................80,96 ILLINOIS TRUCK & EQUIPMENT .............................................................3 IRAY AUCTION FOLEY MN........................................................................................86 IRON PLANET JUNE CALENDAR ............................................................................83 JCB OF TWIN CITIES .............................................................................80 JJ SCHECKEL CORP..............................................................................12

JOHN DEERE ..........................................................................................63 KAWASAKI CONSTRUCTION MACHINERY ..........................................57 KOMATSU AMERICA CORP ..............................................................60,61 KUBOTA...................................................................................................58 LANDOLL CORP .....................................................................................74 LEADING EDGE ATTACHMENTS INC ...................................................34 MB CRUSHER .........................................................................................44 MCALLISTER EQUIPMENT CO..............................................................46 MCCANN INDUSTRIES INC .....................................................................6 MCGREW AUCTIONS VIRTUAL AUCTION ..........................................................................91 MID COUNTRY MACHINERY .................................................................49 MIDLAND EQUIPMENT CO ....................................................................73 MUSTANG MFG ......................................................................................59 MYRON BOWLING AUCTIONEERS INC ELIZABETH PA .................................................................................93 CANTON OHIO.................................................................................88 NATIONAL ATTACHMENTS ....................................................................34 NORAM....................................................................................................53 NORTHSTAR TRUCK SALES .................................................................71 NORTRAX-MIDWEST..............................................................................15 NPK CONSTRUCTION EQUIPMENT INC ..............................................35 PATTEN TRACTOR & EQUIPMENT CO..............................................2,80 POWERSCREEN MW DEALER..............................................................43 RDO EQUIPMENT/SCHARBER EQUIPMENT .......................................27 RITCHASON AUCTIONEERS PINE KNOT KY.................................................................................93 RITCHIE BROS. AUCTIONEERS AUCTION CALENDAR .....................................................................95 ROAD BUILDERS MACHINERY ..........................................................6,19 ROLAND MACHINERY INC ......................................................................5 RUDD EQUIPMENT CO ..........................................................................20 SARGENTS EQUIPMENT .......................................................................14 SENNEBOGEN........................................................................................45 SMITHCO.................................................................................................70 STAR EQUIPMENT LTD............................................................................6 STEFFES AUCTIONEERS ALEXANDRIA MN .............................................................................86 STOCK AUCTION CO .............................................................................88 TEREX CRANES .....................................................................................51 TEREX POWERSCREEN........................................................................47 TITAN MACHINERY ................................................................................18 TITAN TRAILERS MFG ...........................................................................76 TOWMASTER INC..................................................................................75 U-SCREEN ..............................................................................................42 VOLVO CONSTRUCTION EQUIPMENT.................................................22 WAYNE PIKE AUCTIONS PRINCETON MN ..............................................................................88 WEST SIDE TRACTOR SALES ..............................................................29 WILSON EQUIPMENT CO ......................................................................25 OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES ..........................................................................6 COLUMBUS EQUIPMENT CO ..................................................................8 OHIO CAT ..................................................................................................5 RUDD EQUIPMENT ..................................................................................3 THE MCLEAN CO .....................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2011 • Page 95

AUCTION CALENDAR

40 USA NASHVILLE, TN MORRILTON, AR DENVER, CO NORTH EAST, MD RENO, NV ATLANTA, GA LAS VEGAS, NV KANSAS CITY, MO OLYMPIA, WA MINNEAPOLIS, MN HOUSTON, TX COLUMBUS, OH ALBUQUERQUE, NM BELLEVUE, IA PITTSBURGH, PA PHOENIX, AZ DETROIT, MI JACKSON, MS SALT LAKE CITY, UT STATESVILLE, NC ST. LOUIS, MO

615.453.4549 817.237.6544 970.535.6700 410.287.4330 775.342.6031 770.304.3355 702.644.2468 816.633.4096 360.956.1500 507.774.5050 713.455.5200 937.568.9500 505.836.0738 507.774.5050 724.947.7240 602.269.5631 810.691.6076 601.939.2258 801.250.1836 704.873.6633 618.688.1625

JUN 2 JUN 3 JUN 7 JUN 7 * JUN 9 JUN 9 JUN 10 JUN 15 * JUN 16 JUN 17 JUN 22 & 23 JUN 23 JUN 24 JUN 24 JUN 27 JUN 28 JUN 28 JUN 29 JUN 29 JUN 30 JUN 30

Upcoming Unreserved Public Auctions

CANADA EDMONTON, AB LONDON, ON SASKATOON, SK TORONTO, ON GRANDE PRAIRIE, AB REGINA, SK SASKATOON, SK

780.955.2486 519.425.4321 306.933.9333 1.800.357.0659 780.538.1100 306.776.2397 306.933.9333

INTERNATIONAL OCANA, SPAIN AVIGNON, FRANCE POLOTITLAN, MEXICO PANAMA CITY, PANAMA BRISBANE, QLD, AUSTRALIA GEELONG, VIC, AUSTRALIA MOERDIJK, NLD MONCOFA, SPAIN CANCUN, MEXICO CAORSO, ITALY DUBAI, UNITED ARAB EMIRATES TORREON, MEXICO

+34.925.157580 +33.2.32778610 +52.427.266.0909 +507.266.2511 +61.73382.4444 +61.35245.3333 +31.168.392.200 +34.964.580559 +52.1.993.311.5589 +39.0523.818801 +971.4.812.0600 +52.871.731.7424

JUN 15 & 16 * JUN 21 JUN 23 JUN 28 * JUN 29 JUL 13 AUG 4

JUN 2 & 3 * JUN 9 JUN 9 JUN 17 JUN 21 JUN 23 JUN 23 & 24 JUN 30 & JUL 1 JUL 7 JUL 14 JUL 19 & 20 AUG 10

* NOTE: NEW DATE – DATES ARE SUBJECT TO CHANGE

DON’T MISS OUT. We are still accepting consignments for these auctions. Don’t miss out: call & take the hassle out of selling your equipment or trucks. Flexible contract options All-inclusive service Competing on-site & online bidders Certain sale & payment dates

For complete and up-to-date equipment listings visit

» rbauction.com

Page 96 • May 28, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE