Midwest #22, 2011 by Construction Equipment Guide

$3.00

Published Nationally

Midwest Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

October 29, 2011 • Vol. XVIII • No. 22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com

Inside

Detroit-Windsor Bridge Fails to Clear Key Step

2011 ICUEE Draws 16,000 Attendees...8

By Tim Martin ASSOCIATED PRESS

raised even more, an 8-mi. (13 km) embankment has been built and is now being lengthened to 12 mi. (19.3 km), and about 300 homes and businesses have been relocated. Devils Lake is a closed basin, meaning it has no inlet or outlet within the Red River Hudson Bay Drainage System, leaving the water level at the mercy of rain, evaporation or entering the groundwater table. The level of the lake has fluctuated from only 2 ft. (0.6 m) deep in 1940 to about 60 ft. (18.3 m) at some points now.

LANSING, Mich. (AP) Supporters of a proposed new bridge between Detroit and Windsor, Ontario, scrambled Oct. 20 to revive the plan after losing a key vote in a Michigan Senate committee. The Republican-led Senate Economic Development Committee defeated a measure to authorize the bridge in a long-anticipated vote. Two Republicans supported the measure and three opposed it. Democrats abstained from voting because the bill didn’t include provisions aimed at protecting residents in the southwest Detroit neighborhoods that would be affected by the new span. A spokeswoman of Republican Senate Majority Leader Randy Richardville, who sponsored the bridge legislation, said there were no plans to do anything more with the bill defeated and no nearterm plans to introduce alternative legislation. That would be a legislative defeat for first-year Republican Gov. Rick Snyder, who supports the new bridge. But Snyder wouldn’t quit on the proposal Oct. 20, calling for a “cooling down period” to talk to lawmakers about the proposal. “We’re going to continue to pursue this as a solution because we should build a bridge for our citizens,” Snyder said. “It’s in their best interest.”

see FLOODING page 86

see BRIDGE page 30

One of the constants the contractor had to cope with during Phase 3 of the project in July of 2011 was slurry, which was effectively dealt with by excavators.

McCann Delivers Lunch to Wacker D rive Crews...12

Flooding Becomes Problem in Devil’s Lake Project By Dorinda Anderson CEG CORRESPONDENT

Morba rk Hold s Demo Days Ev ent. ..5 0

Table of Contents ....................4

Increasingly high water levels over the last several years is once again creating a need to raise road heights and build embankments to protect the city of Devils Lake in northeastern North Dakota. Combating the high water levels by raising road levels, moving structures and building levees has cost almost $1 billion over the years. More than 40 mi. (64.3 km) of road have been raised and some are now being

Snow & Ice Section ..........37-45 Crawler Loaders, Dozers, Undercarriages & Parts Section ..........................................51-56 Parts Section..........................57 Paving Section..................71-81 Auction Section ....Starts at 86 Business Calendar ................87 Advertisers Index ..................94

AGC Reports Materials Prices Flatten in Sept. The amount contractors pay for a range of key construction materials held steady in September but climbed 8.1 percent from the year-earlier level, according to an analysis of producer price index figures released Oct. 18 by the Associated General Contractors of America. Meanwhile, the price contractors charge for new nonresidential building con-

struction edged up only 2 to 3 percent over 12 months, depending on building type. “Feeble demand for construction is forcing contractors to absorb the bulk of materials price hikes, instead of passing them along to owners,” said Ken Simonson, the association’s chief economist. “This pattern has persisted for more than two years, and many con-

tractors are increasingly at risk of going under.” Simonson noted that key materials showed divergent price trends in September but all posted double-digit year-over-year increases. Those materials include diesel fuel, which was up 3.3 percent for the month and 39.4 percent see PRICES page 47

Page 2 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 877-688-2228 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

MOTORGRADERS

SKID STEERS Cat 232B, 2004, UN1671, EROPS, Aux Hyd ......................$22,000

Cat 140M, 2008, N5749, EROPS, A/C, Heat, 14’ Blade, Ripper ......

Cat 236B, 2005, UN2041, EROPS, Heat, HYD Coup ..........$20,000

........................................................................................$285,000

Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000

COMPACTION

PATTEN CONSTRUCTION PRODUCTS

Cat 242B, 2006, W1138, EROPS, Quick Coupler ..............$24,000 Cat 246C, 2007, W1613, EROPS, Heat, Man, QC ..............$26,500

ID# N4761 $49,000

Cat CS54, 2008, N5757, OROPS, Sm Drum ....................$115,000

Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ............$36,000

Cat CS-433E, 2005, UN2129, OROPS................................$48,000

Cat 247B, 2005, UN1610, EROPS, Heat, Hyd QC ..............$28,000

Cat CP-563C, 1998, UN2209, OROPS, Blade ....................$58,000

Cat 252B2, 2008, UE1456, Hyd QC, Self Leveling ............$22,000

DOZERS

Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$32,000 Cat 257B, 2005, W0539, Self-Leveling, Man QC ..............$27,000

Cat D4G LGP, 2006, N4970, EROPS, A/C ..........................$65,000

Cat 257B, 2007, W1522, EROPS, Heat ..............................$29,000 Cat 262B, 2005, W0523, OROPS, Aux Hyd ......................$24,000

ID# UN1922 $122,000

Cat D5G LGP, 2006, N4976, EROPS, A/C ..........................$84,000 Cat D5G XL, 2007, N5413, EROPS, Heat, A/C ..................$80,000

Cat 267B, 2005, UN1930, Self Leveling, QC ......................$21,000

Cat D5K LGP, 2008, N5711, EROPS, Heat, 3rd Valve ......$106,000

Cat 277, 2003, UN2127, EROPS, Heat, No Door ..............$19,000

Cat D6K LGP, 2009, N6055 NA, EROPS, 4 Valve Hyd......$148,000

Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$39,000

Cat D6N XL, 2005, UE1443, EROPS, PAT Blade ..............$135,000

TELEHANDLERS

Cat D6N XL, 2007, N5477, EROPS, Heat, A/C ................$190,000 Cat D6R XL, 2006, UN1811, EROPS, A/C, SU Blade ......$229,000

Cat TH360B, 2006, N4761, EROPS, Heat, A/C ..................$49,000

Cat D6R XW, 2001, UN2072, EROPS, A/C, Ripper Hyd ....$95,000

EXCAVATORS WHEEL LOADERS/LOADER BACKHOES Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ..........$36,000 Cat 315CL, 2006, N4867, EROPS, Heat, A/C, QC ..............$78,000 Cat 315CL, 2007, N5239, EROPS, 10’2” Stick, QC ............$80,000

Cat 416E, 2007, N5303, EROPS, Heat, A/C, E-Stick ..........$78,000

ID# UN1823 $260,000

Cat 420E IT, 2006, N4926, EROPS, A/C, E-Stick................$65,000

Cat 325DL, 2007, N5591, 10’6” Stick, Coupler................$180,000

Cat 420E IT, 2008, UE1253, EROPS, Heat, A/C, E-Stick ....$70,000

Cat 345CL, 2006, UN1823, EROPS, 12’ 10” Stick, QC ....$260,000

Cat 430E, 2007, N5471, EROPS, Heat, A/C, Ride Cntrl......$80,000

Hitachi ZX450-LC, 2007, UE1446, EROPS, 6160 Hrs......$149,000

Cat 430E, 2007, N5415, EROPS, Heat, A/C, QC ................$96,000

TRACK LOADERS

Cat 430E IT, 2006, N5209, EROPS, A/C, E-Stick................$56,000 Cat 906, 2008, UE1441, EROPS, A/C, 3rd Valve................$65,000

Cat 953C, 2006, N4908, EROPS, A/C, GP Bkt....................$80,000 Cat 924GZ, 2007, N5786, EROPS, Heat, Ride Control ....$100,000

Cat 953C, 2006, N4827, EROPS, A/C, GP Bkt ..................$80,000 Cat 953C, 2006, N4907, EROPS, 2.25 CYD GP Bkt ..........$85,000

ID# N5749 $285,000

Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ....$94,000

Cat 963C, 2005, N4354, EROPS, A/C, GP Bkt ................$125,000

Cat 928HZ, 2008, N5866, EROPS, 3.1 CYD Bkt, QC ........$118,000

Cat 963C, 2007, EROPS, A/C, GP Bkt ..............................$145,000

Cat 928HZ, 2008, N5878, EROPS, 3.1 CYD Bkt, QC ........$118,000

Cat 963C, 2007, N5429, EROPS, 3 CYD GP Bkt ..............$145,000 Cat 963C, 2007, N5363, EROPS, 3 CYD GP Bkt ..............$145,000

Cat 930G, 2006, UN1922, EROPS, Heat, A/C ..................$122,000 Cat 930G, 2007, N5772, EROPS, 2.9 CYD Bkt, Ride Cntl ..$115,000 Cat 930H, 2008, N5661, EROPS, Ride Cntl ........................$132,000

Chad Benz 630-758-1226 benzc@pattenindustries.com

Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $100,000 Cat 950H, 2007, N5284, EROPS, Heat, Ride Cntrl ..........$175,000

ID# N5413 $80,000

CALL 887-688-2228

Cat 950H, 2007, N5594, EROPS, Heat, Ride Cntrl ..........$190,000

INVENTORY CHANGES DAILY

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 3

320 Briscoe Drive Morris, Illinois 60450 Toll Free: (800) 941-2133 Email: sales@iltruck.com

www.iltruck.com

RENTAL FLEET REDUCTION SALE

1973 Cat 815A, 4- 38” padfoot drums with cleaners, canopy, Cat 3306 10.5L 170HP diesel, 11’ 9” hydraulic leveling blade, 40,058 lbs, meter reads 2269 hrs ........................................................$34,500

2009 Bomag BW278 AD, 78” vibratory double drum smooth compactor, canopy, Cummins QSB4.5 Tier 3 130HP diesel, 27,060 lbs, joystick controls, front and rear spray system, 254 hrs ............................$89,500

1990 Case 585E, cab, Case 4-390 75HP diesel, 5,000# capacity @ 24” load center, 12’ reach, 2 stage mast. 60” carriage, sideshift, 4’ forks, 19.5L-24 front tires, LT235/85R16 rear tires, 6443 hours ....$12,500

1984 Hyster Loyboy, 21’3”x8’ deck, 7’4” rear deck over 8.25-15 tires, air brakes, hydraulic lift, D rings .. ......................................................................$12,500

2005 Superior DT80J, cab with A/C and heat, 8’ poly angle broom, JD 4045D 80HP dsl, 2 speed hydrostatic, 235/75R15 tires, 170 gallon water system, joystick broom controls, road lights, beacon, 798 hrs $26,500

(2) 2008 Icon 819’s, 19 cubic yard ejectors, 10’ cut, heavy cast 360 swivel quick hitch, 27,500 lbs. 2- 29.5x25 tires, hydraulic brakes ............................POR

2005 Noram 65E, canopy, 83HP New Holland diesel, 4WD, 10’ moldboard, 15-19.5 tires, front scarifier, powershift, 16,800 lbs, 1636 hrs ..................$49,500

2003 Cat 725, cab with A/C, Cat C11 309HP diesel, 25 ton capacity (18.8 yards), 6WD, 23.5R25 tires, 49,100 lbs., 8,841 hours ................................$89,500

2009 Ford F150 King Ranch Lariot, 4x4, 5.4L FFV, Cruise Control/Tilt Wheel, Auto Temp Control, Heated/Cooled Front Leather Captains Chairs, Memory Driver Seat Pedals, Power Sliding Rear Window, Rear View Camera, Sirius Radio, Sync Voice Activated System, Universal Garage Door Opener, Power Windows/Locks, Trailer Towing Package, 38,005 Miles ..............................$32,500

2008 JCB 506-36, UNUSED, canopy, JCB444 85HP diesel, 4WD, 6,000# capacity, 36’ reach, 48” x 48” carriage, 13.00-24 foam filled tires, 3 mode steer, aux. hydraulics, 36 hours ..............................$44,500

2006 Finn B260 Straw Blower, John Deere 4045T 115HP diesel, 20 ton/hour, 100’ range, power feed conveyor chain, pintle hitch, LT235/85R16 tires, 4,800 lbs., 405 hours ....................................$22,500

2001 Cat D5C LGP III, cab with A/C, Cat 3406T 90HP diesel, 26” pads, 10’ 6” 6-way blade, hydrostat drive, drawbar, 19,256 lbs., 3,917 hours..................$34,500

(4) 2007 Icon 821 Scrapers, 21 cubic yard ejectors, 11’ cut, heavy cast 360 swivel quick hitch, 26,500 lbs., (2) 20.5x25 inside tires, (2) 23.5x25 outside tires$44,500 Ea.

(4) UNUSED 2007 Icon 418T Scrapers, 18 cubic yard hydraulic dump, 11’ cut, heavy cast 360 swivel quick hitch, 23,200 lbs., (4) 20.5x25 tires ........$39,500 Ea.

2006 Reynolds 17CS12, 17 Yard Dump, 12’ Cut, (4) 20.5x25 Tires..................................................$37,500

2006 Icon 18D, 18 cubic yard hydraulic dump, 11’ cut, (4) 20.5x25 tires, hydraulic brakes............................POR

Page 4 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

IN THIS ISSUE 51

SPECIAL SECTION…

CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTS

Be sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers, undercarriages and parts.

FEATURES…

ICUEE CELEBRATES SECOND LARGEST EVENT IN SHOW HISTORY

The show attracted nearly 16,600 registered attendees to interact with more than 800 exhibitors, showing equipment and products on more than 1.1 million net sq. ft. of displays.

BALE EQUIPMENT SOLUTIONS HOLDS CASE TRIPLE THREAT RODEO While the event helped introduce Bale Equipment Solutions as a local Case dealer, the rodeo also proved to be a big draw for Case Equipment Company.

ALBAN TRACTOR, ZIEGLER CAT APPOINTED AS NORAM DEALERS

The NorAm 65E follows a 60 year heritage of compact graders originating with the Allis Chalmers model “D” in 1949.

MURPHY TRACTOR & EQUIPMENT HOSTS CUSTOMER LUNCHEON

More than 100 individuals attended the gathering, where they enjoyed lunch, learned about John Deere equipment, and had a chance to interact with Murphy Tractor personnel.

ARCTIC SNOW & ICE, PATTEN INDUSTRIES WELCOME SNOWFEST

Attendees got a chance to experience first-hand the combination of Arctic snowplows and Cat machines as a system for snow removal.

50 22

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

Edwin M. McKeon Sr. Hal Ewing Joseph S. McKeon Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon •Illinois •Wisconsin •Northwest Indiana •Missouri •Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Contact

Ed Bryden •Central and Eastern Indiana •Michigan •Ohio •Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel •Iowa •Minnesota •Nebraska •North Dakota •South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

DEALERS FROM 15 COUNTRIES ENJOY MORBARK’S DEMO DAYS

The event drew more than 300 customers and dealers from 15 countries eager to see the new machines Morbark launched during the event.

83 CLASSIFIEDS 87 BUSINESS CALENDAR 88 COMING AUCTIONS

Main office

MCCANN INDUSTRIES DELIVERS FOR WACKER DRIVE WORKERS

On Oct. 7 McCann Industries held a cookout and fed hundreds of tradesmen from the James McHugh Construction Co., the general contractor for the Wacker Drive rebuild project.

Founder, Publisher & CEO Vice President Emeritus Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

•North & South Dakota •Nebraska •Kansas •Minnesota •Iowa •Missouri •Illinois •Wisconsin •Michigan •Indiana •Ohio •Kentucky

EQUIPMENT… 89 LIEBHERR LRH 100 Piling Rig

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2011, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 5

Komatsu D61EX-15, ’05, 4,778 hrs ......$114,500

Wirtgen WR2500S, ’07, 3,100 hrs ............$CALL

BOOM MOWERS

DOZERS

AIR CURTIN DESTRUCTORS

Tiger TSR-60C, ’06, NEW ........................$14,500 Tiger TSF-75C, ’06, 60 hrs ........................$12,00

Dresser TD7H, ’98, 3,354 hrs ..................$19,500 Komatsu D31PX-21, ’03, 2,956 hrs ........$48,500 Komatsu D39PX-21A, ’07, 2,667 hrs ......$59,500 Komatsu D39EX-21A, ’05, 1,176 hrs ......$57,500 Komatsu D61EX-15, ’05, 4,778 hrs ......$114,500 Komatsu D65EX-12, ’98, 4,850 hrs ........$51,500 Komatsu D65PX-12, ‘96, 4969 hrs ..........$52,500 Komatsu D85E-12, ’78 ............................$24,500

Concept Products CP2000, ’06, 267 hrs....$8,500 Concept Products CP4000, ’04, 927 hrs....$8,500

EXCAVATORS Caterpillar 314CLCR, ’05, 4,009 hrs ......$79,500 Deere 450CLC, ’05, 4,962 hrs ..............$132,500 Kobelco K916LC MarkII, ’90, 9,285 hrs ..$22,500 Komatsu PC35MR-2, ‘08, 301 hrs ..........$49,500 Komatsu PC150LC-6, ‘98, 9246 hrs ........$39,500 Komatsu PC200LC-7, ‘05, 4000 hrs ........$92,500 Komatsu PC200LC-7, ‘02, 3044 hrs ........$97,500 Komatsu PC200LC-8, ’07, 4,915 hrs ......$99,500 Komatsu PC200LC-8, ’08, 4,293 hrs ....$102,500 Komatsu PC228USLC-3, ‘01, 6917 hrs....$84,500 Komatsu PC270LC-7, ’04, 4,608 hrs ....$132,500 Komatsu PC300LC-7EO, ‘06, 3004 hrs..$159,500 Komatsu PC300LC-7EO, ‘07, 1230 hrs..$189,500

SHREDDERS, TROMMELS Doppstadt DW3060K, ’09, 328 hrs ..............CALL Doppstadt DW3060SA, ’09, 410 hrs ............CALL Doppstadt SM617, ’09, 290 hrs ..................CALL Doppstadt SM720, ’09, 235 hrs ..................CALL Doppstadt SM726, ’09, 257 hrs ..................CALL

COMPACTION, MILLING & PAVING Gehl 1649 Paver, ’01, 433 hrs ................$24,500 Hypac C747B, ’01, 3,524 hrs ..................$11,500 Hyster C748A, ’92, 4,454 hrs ....................$3,500 Ingersoll Rand DD34HF, ’07, 2,788 hrs ..$16,500 LeeBoy 1000D, ’03, 1475 hrs ..................$19,500 LeeBoy 7000T, ’01, 2,300 hrs ..................$29,500 LeeBoy 8500LD, ’00, 1535 hrs ................$29,500 LeeBoy 8500LD, ‘04, 2739 hrs ................$26,500 LeeBoy 8500LD, ’04, 1823 hrs ................$33,200 LeeBoy 8510LD, ’06, 306 hrs ..................$79,500 Rosco TRUPAC915, ‘05, 481 hrs ............$39,500 Vogele 880WB, ’05, 4,739 hrs ................$49,500 Wirtgen W600DC, ’05, 610 hrs ..................$CALL Wirtgen W600DC, ’03, 2800 hrs ................$CALL Wirtgen W2000, ’03, 2996 hrs ..................$CALL Wirtgen W2000, ’96, 9346 hrs ..................$CALL Wirtgen WR2500S, ’07, 3,100 hrs ............$CALL

BACKHOE LOADER Komatsu WB140-2N, ’04, 2,805 hrs ..........$CALL

FORESTRY Fabtek 346B Forwarder, ’03, 8978 hrs..$125,000 Fabtek 344LB Forwarder, ’02, 13,200 hrs ............ ................................................................$42,000 Fecon FTX130-FM, ’06, 875 hrs ..............$86,500 Franklin 132XL Forwarder,......................$16,000 Franklin 3000/Stroke Head, ’92 ................$9,800 K-2 Four Wheel Forwarder, ’05, 2,160 hrs ....$90,000 Log Lift F-135 Log Loader, ’05..........................$7,000 Timberjack 1270D, ‘03 ..............................$149,000 Timberjack 1270D, ’05, 7,575 hrs ................$180,000 Valmet 415EX/Rolly II, ’06 ....................$245,000 Valmet 425EXL w/Quadco, ’06, 5,700 hrs ............ ..............................................................$210,000 Valmet 840.3/8, ’05, 9800 hrs ..............$165,000 Valmet 840.3/8, ’06, 9,592 hrs..............$185,000 Valmet 911.3/370.2, ’06........................$215,000

WHEEL LOADERS Case W30, ’86, 6,426 hrs ........................$16,500 Komatsu WA200-5, ‘07, 2528 hrs ..........$93,500 Komatsu WA320-6, ’08, 3961 hrs ........$126,500 Komatsu WA380-5L, ‘04, 6957 hrs ......$106,500 Komatsu WA380-5, ‘06, 4965 hrs ........$132,500 Komatsu WA400-5L, ’04, 7,169 hrs ......$112,500 Komatsu PC200LC-8, ’07, 4,915 hrs ......$99,500 Komatsu WA420-1, ’88............................$39,500

Komatsu WA420-1, ’88............................$39,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

V I S I T R O L A N D M A C H I N E R Y . C O M

Page 6 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Excavator Rental Specials Q

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Delivered to your job site

Serving the Constructor ®

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

Rent Today!

Crestwood 708-597-3110 McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana CX240 Excavator

CX330 Excavator

CX460 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI $875/Day, $2,625/Week, $7,875/Month

MC r h EJH EFQUI $1,235/Day, $3,705/Week, $11,115/Month

Mustang 442 Skid Loader, 40HP, Open Canopy, Single Pin, I/D: 6419222308, 5252 Hrs, $8,995

Mustang MTL16 Track Loader, 67HP, Open Canopy, I/D: 300617, 1825 Hrs, $21,995

Gehl DL6, 6000# Lift, 42’ Boom, Open Canopy, Outriggers, I/D: 320796, 2770 Hrs, $35,950

Mustang ME3803ZT, 7,700# Excavator, Cab, I/D: E02237, 1175 Hrs, $30,995

Gehl RS5, 6,000# Lift, 34' Boom, Open Canopy, I/D: 811425, 2800 Hrs, $27,995

Mustang ME7503ZT, 16,000# Excavator, Cab, Heat, I/D: C03291, 1700 Hrs, $57,995

★ CONSTRUCTION

EQUIPMENT & SUPPLIES SINCE 1968

STAR EQUIPMENT LT D .

Call Sales 515-283-2215 • 800-352-5401 1401 2nd Ave • Des Moines, IA 50314 www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo

Schererville* 219-865-6545

McCannOnline.com

*Case authorized dealer location

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 7

2008 New Holland L180 ......................$23,500

1979 Cat 631D ......................................$49,500

2000 Cat 320BL ....................................$62,500

1994 CAT D4HXL ..................................$28,500

S/N N8M489391, 3257 hrs, Erops, A/C, 2-speed, bucket, hyd coupler, tires good

S/N 24W02603, 9284 Hrs, OROPS, Tires Fair

S/N 6CR04830, 6283 Hrs, EROPS, 48” Bkt, U/C Good

S/N 8PJ00616, 9847 hrs, Orops, 90% undercarriage remaining, V PAT BLADE

1995 CAT CB214C ................................$13,500

2005 Cat 226B ......................................$19,500

1968 Cat D7E ........................................$23,500

2000 Cat 980G ....................................$120,000

S/N 9XK00201, 888 hrs, 39" roller, rops, working lights

S/N MJH05203, 689 hrs, Erops, manual coupler, aux hyd, 66” bucket, tires good 1-speed

S/N 48A10602, Hours Unknown, OROPS, SU Blade w/Tilt, U/C Good

S/N 2KR03995, 15,866 hrs, Erops, 7 YD bucket, tires good to fair

2006 Cat D5KLGP................................$115,000

2005 CAT 247B ......................................$21,000

1998 Cat D6RLGP..................................$75,000

1986 Cat 950B ......................................$49,000

S/N YYY00151, 1504 hrs, Erops, A/C, 26” tracks, blade

S/N MTL01299, 2,274 Hrs, EROPS, Aux. Hyd., Good U/C, Bucket, Heat, 1-speed

S/N 9PN00987, 9119 hrs, Orops, Good U/C – turned, S blade, no leaks

S/N 22Z02424, Erops, hyd coupler, tires fair, bucket, rebuilt trans & axles in 2010, 24500 hrs

1978 Champion 715A ..........................$13,500

1985 Cat 916 ..........................................$24,000

1977 Cat D6D ........................................$29,500

2008 Cat 272C........................................$33,500

S/N 715A-13-43-11633, 6499 Hrs, EROPS, Front Scarifier, Tires Good to Fair

S/N s/n 2XB00891, 3921 hours, Erops, heat, 2 yard bucket, tires good

S/N 04X01976, 6041 Hrs, OROPS, S Blade with Hydraulic Tilt, 22” Pads

S/N RED00965, EROPS, A/C, Tires Fair, 1743 hrs, Hyd Quick Coupler

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.

Page 8 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ICUEE Celebrates Second Largest Event in Show History

he 2011 International Construction and Utility Equipment Exposition (ICUEE), the second largest in show history, was held Oct. 4 to 6 at the Kentucky Exposition Center in Louisville, Ky. The show attracted nearly 16,600 registered attendees to interact with more than 800 exhibitors, showing equipment and products on more than 1.1 million net sq. ft. of displays and extensive hands-on equipment demonstrations in job-like conditions. “We’re very pleased and gratified by industry support of the show with these strong numbers during a stillrecovering economy,” said ICUEE Show Director Melissa Magestro. “Despite some uncertain market conditions, our industry is looking ahead to be ready for future business."” Registrants came from all 50 states, all 10 Canadian provinces and more than 40 other countries worldwide. Returning to ICUEE were the H2O-XPO of the National Rural Water Association and the iP Safety Conference and Expo. The Association of Equipment Management Professionals (AEMP) sponsored a new Fleet Management Exhibit Pavilion and also developed a show education track for fleet management professionals. A Sustainable Energy Pavilion highlighted “green” technology. The importance of job site safety was discussed in the iP Safety Arena at ICUEE and at the new “Safety Zone” from the National Commission for the Certification of Crane Operators (NCCCO). ICUEE’s popular online New Products & Technologies Preview returned, with special booth floor mats on the show floor to identify participating companies. Many exhibitors also signed up for the new online “Technical Experts Directory,” which alerted attendees to the industry experts on-site and ready to discuss specific job performance needs. These programs and the online Show Planner exhibitor listings will remain on the show Website for several months. For more information, visit www.icuee.com. see ICUEE page 70

Bob Byrne (L) of Kelly Tractor joins Link-Belt Construction Equipment’s Scott Knight to talk about its new TCC-1100 telescopic crawler crane with ICUEE attendees.

(L-R): Lance Rydbom, John Bair, Guillermo Vazquez and Briette Baxter were on hand to help National Crane introduce its new NBT45 at the show.

(L-R): MB America’s Max Ravazzolo and Guido Azzolin catch up with customers Howard Madden and Donald Marcotte of the city of Winter Park, Fla., and Casey Reed of MB America.

(L-R): Paul Hecker, Mark Whaley and Jim Brown of Palfinger North America show off the Pal Pro 72, Palfinger’s 72,000 ft./lb. crane body mechanic truck package.

(L-R): Kip Bancroft and Brian Benck of West Side Tractor Sales and Woods Construction Equipment’s Doreen Putnam get a chance to meet at the Construction Equipment Guide booth.

Derek Trimingham of Tractor Works, Free Union, Va., is pleased to have a chance to demo this John Deere 323D skid steer with VR73C vibratory roller attachment.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,500 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . . . . . . . . . . . . . . . . . . . . . . .$59,000 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . . . . . . . . . . . . . . . . . . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 $79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . .$89,500 COMPACTORS IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . .$4,000 - $6,500

LANDSCAPING Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . .$13,000 Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,500

CRAWLER LOADERS

MOTOR SCRAPERS Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . .CALL Cat 621E, 1989, Scraper, OROPS, 33.25x29, OFF ROAD HAULERS Komatsu CD60R-1 Crawler Dump Truck, very nice . . . . . . . . . . . . . . . . . . . . . . .CALL 1997, 360° rotation . . . . . . . . . . . .$66,000 (2) Cat 637 scrapers, 1975, 91P series, dual Volvo A40, 1998, 40 tons, 10991 hrs, 395 engine, OROPS, good rubber . .$23,500 Ea. hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work HYDRAULIC EXCAVATORS ready . . . . . . . . . . . . . . . . . . . . . . .$127,500 JD 490E, 1994, 9'11" stick, Aux. hydraulics, Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, quick coupler, 6-7000 hrs, Fleet maintained . 29.5R25, working everyday . . . . .$145,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, Hitachi UH181, 1985, Equipped w/hammer . 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 hitch rebuilt . . . . . . . . . . . . . . . . .$115,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on Volvo A40, 1995, 40 tons, 395 hp, 8WD, rubber, operational . . . . . . .$10,500/OFFER 29.5R25, A/C, P/S trans, tailgate, work ready Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 10 roller U/C . . . . . . . . . . . . . . . . . $31,500 tires, approx 7,000 hrs, good condition . . . .. Kobelco SK200LC Extra Long Reach, 1993, . . . . . . . . . . . . . . . . . . . . . . . . . . .$147,500 32" TBG pads, 42' reach, nice . . . .$68,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, Komatsu PC200 LC-6, 1996, 32" pads, 42" 26.5x25, A/C, P/S trans, working everyday on Bkt, long stick . . . . . . . . . . . . . . . . .$39,500 jobsites . . . . . . . . . . . . . . . . . . . . . .$87,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" Volvo A35, 1995, 35 tons, 326 hp, 6WD, stick, 44" Bkt . . . . . . . . . . . . . . . . . .$43,500 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . .$89,000 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 bkt, 27.6" TBG pads, work ready . .$57,000 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, (5) Komatsu PC128UU, 1996, offset boom, works everyday . . . . . . . . . . . . . . .$122,500 rubber tracks, low hrs . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” CRAWLER TRACTORS boom, 11’10” stick, 44’ DGB, aux plumbing, Cat D6H, 1987, Semi U blade w/tilt, ROPS, bucket choice, 24k ctwt . . . . . . . .$255,000 fair U/C . . . . . . . . . . . . . . . . . . . . . .$74,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, (2) Cat D6TXW, 2008, ROPS w/sweeps, aJRB coupler, 31.5” TBG, ctwt removal, choice blade, winches, v. good . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade .. of bkt . . . . . . . . . . . . . . . . . . . . . . .$77,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” (2) JD 450G, 1996, wide tracks, ROPS, PAT TBG, ctwt removal, choice of bkts, working blade . . . . . . . . . . . . . . . . . . . .$39,000 Ea. everyday . . . . . . . . . . . . . . . . . . . . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG CRANES pads, JRB coupler, plumbed, 8’6” width, nice, Broderson IC80-1B, 1984, 8.5 ton, Perkins work ready . . . . . . . . . . . . . . . . . . . . . .CALL dsl, OROPS, 20’ boom,, 3500hrs, good . . . .. Volvo EC460B LC, 2003, 4600 hrs, 23’ . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, hammer/shear plumbing very good condition dual fuel, 10.00R15 tires, 3,400 hrs$21,500 Grove RT58C, 1981, down cab, 18 ton r.t., . . . . . . . . . . . . . . . . . . . . . . . . . . .$159,000 70' boom anti-two block, GM dsl, clean . . .. TRUCKS & TRAILERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, (2) 48' Box Vans w/Liftgates, Good dsl, 4 section boom 8' jib . . . . . . . .$14,500 Condition . . . . . . . . . . . . . . . . . . . . . . .CALL Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . .$46,000

AIR COMPRESSORS IR 185’s, JD diesels . . . . . . . . . . . . . .CALL SPECIALS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11,900 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200 IAmerican Augers 16" Boring Machine, 10 HP gas, 35,000# thrust, 30' track . .$7,500 BACKHOES Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . .$24,500 Volvo BL60, 2006, 4x4, EROPS, ext hoe, aux hyd . . . . . . . . . . . . . . . . . . . . . . . . .$32,500 CRUSHING & CONVEYING Read RD90B screening plant, 1994, Lister diesel, dual tires on axle, hyd extensions, good condition, work ready . . . . . .$32,500 Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. side & rear conveyors, T/A carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . .$150,000 MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$3,500 Ea. Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONTACT: JEFFREY McCLAIN O: 636-931-4044 C: 314-435-5138 jeff@essexcontracting.com

EQUIPMENT FOR SALE YEAR 1994 1194 1977 1994 1994 1994 1986 1991 1990 1988

MAKE Caterpillar Caterpillar Caterpillar Caterpillar Terex Terex Grove Grove Gardner Denver Vemeer

MODEL 963LGP 973LGP G12 330L 2766B 2766B RT-522 CRANE RT-875 SCH2500 RD T-850 TRENCHER

SERIAL NUMBER 21Z05143 86G01579 61M04713 5YM00344 A4731230 A4731242 68546 75915 2711479 148

HOURS 1754 9245 237 14784 7100 7000 9651 18,860 0 1895

PRICE $17,500 $21,600 $48,000 $38,700 $19,600 $19,600 $59,000 $189,000 $28,700 $59,900

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industy acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Phone: 502-493-4380 Fax: 502-499-3180 ron_weir@bramco.com

www.brandeismachinery.com

Used Equipment 2006 Komatsu D39EX-21A Dozer, w/EROPS/AC, 2000 Hrs, 6-Way Blade, Sweeps & Screen, #BCC1902..........$47,000 1999 Komatsu D65EX-12 Dozer, w/EROPS, Semi U Blade, Sweeps & Rear Screen, #BTE1001 ........................................$42,700 2005 Komatsu PC200LC7 Excavator, w/Cab, Std Arm, 48” ESCO Bkt, #BTP1903 $84,000

1995 Cat 775B, 25,000 Hrs, #BTL1601 ..............................................$145,000

Please call or check out our Web site for our Certified Rental Fleet Reduction Sale!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 11

View us at: www.amstate.com

EXCAVATORS GROVE RT875E

AMERICAN 5300 CRAWLER CRANE

GRADALL XL4100 - ‘00 • truck mtd excavator with 5375 original hours, good condition w/72” Ditching bucket ............................................$39,500

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: PAVERS / ROAD WIDENERS CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V, approx 1360 hrs ............................................................................$201,500 MIDLAND MODELS SPD-8 AND SPR-6 - ‘11 • low hour rental units..$POR CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES TEREX PR165 - ‘09 • 4 wheel, front loading, w/24” cutter, 282 hrs ............ ......................................................................................................$189,000

ROLLERS SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 200 hrs ............$13,500 SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib, “on rent”........................$POR SAKAI SW652 - ‘10 • 58” Vib, remaining std warranty and EPTW, 125 hrs ........................................................................................................$79,500 SAKAI SW880 - ‘10 • 79” Vib, remaining std warranty and EPTW, “on rent” ....................................................................................................$POR SAKAI SW800II - ‘09 • 67” Dbl Drm Vib, w/balance of EPTW, 595 hrs........ ........................................................................................................$79,500 SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 400 hrs ................................................................................$94,500

Contact Marty in Illinois 1-800-307-0221 mahrendt@amstate.com

Photos & Detail Descriptions view: www.finkbinerequipment.com

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT SIMPLICITY portable dual screen plant, 6x16 and 6x20 triple deck horizontal screens, 60" underscreen conveyors, 42" cross conveyors, tri-axle chassis with hydraulic leveling......................................................................CALL CEDARAPIDS 4136 Portable twin roll plant, with Allis 5'x16' single deck horizontal screen, Cummins V-12 diesel, on tandem axle chassis with hydraulic leveling ......................................................................$68,000 ALLIS H400-SD portable cone plant, Cummins diesel, rear feed conveyor, side discharge conveyor, tandem axle chassis with run-on hydraulic jacks ............CALL EXCAVATORS DEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8” Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight, 5800 Frame Hours and Recent Engine Rebuild ............................................$125,000 LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adn Removable Sideframes, Approx. 190,000 Lb. Working Weight..................................................CALL LIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) with Various Boom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, Hydraulically Removable Counterweights, 124,000 to 130,000 Lb. Working Weights..........CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

CRANES AMERICAN 5300 70 TON CAPACITY CRAWLER CRANE, Powered by a GM 6-71 Diesel with 3 Stage Torque Converter, 140’ of 46HR Angle Boom, 40’ Jib, Third Drum, Extendible Crawler Base with 32” Crawler Shoes, 40,000 Lb. Counterweight ..............$149,500 KOBELCO CK800 80 TON CAPACITY CRAWLER CRANE, 1996, with 140’ Main Boom, 30’ Jib, Two Main Hoist Drums Plus an Auxiliary Third Drum, Hydraulically Extended Undercarriage with 36” Track Pads ..................................................................CALL GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ................................................Reduced to $179,900 GROVE RT760E 60 TON CAPACITY ROUGH TERRAIN CRANE, 2008, (Several Available) with Cummins Diesels, 36’ to 110’ Booms, 33’ to 56’ Offsettable BiFold Swingaway Extensions, Model HO30 Main & Auxiliary Hoists, 29.5x25 Tires, block & ball......CALL GROVE RT875E 75 TON ROUGH TERRAIN CRANE, 2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway, Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3position outriggers ............................................CALL

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 12 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McCann Industries Delivers for Wacker Drive Workers

James McHugh Construction Co. Superintendent Rich Phelan (L) thanks McCann Industries Vice President of Sales & Marketing Jim McCann for feeding the workers on the Wacker Drive job site.

Crews place concrete at the Randolph intersection.

n the midst of one of the most ambitious projects Chicago has ever seen, McCann Industries provided a muchdeserved break for all involved. On Oct. 7 McCann Industries held a cookout and fed hundreds of tradesmen from the James McHugh Construction Co., the general contractor for the Wacker Drive rebuild project. The city of Chicago is rebuilding the North-South leg of Wacker Drive from Randolph to Congress Street. Revive Wacker Drive: Part 2 will modernize the upper and lower levels of Wacker Drive by creating safer, more efficient roadways for motorists and pedestrians. A new interchange at Congress also will be built, complete with safer exit and entrance ramps and a spacious, three-acre park. The James McHugh Construction Co. began on the project in June of 2010 and is scheduled for completion in December of next year. While McCann Industries recognized the strong effort by the James McHugh Construction Co. in making the Wacker Drive project a success, the company also acknowledged the great support the project has received from Mar-Mac Wire, who manufactures carbon steel wire and wire products for the construction and OEM industries. The James McHugh Construction Co. is a Chicago-based construction company that was founded in 1897 and has been involved with the construction of some of the most recognized properties in the Chicago Skyline.

McCann Industries’ Rich Hoffmayer (L) and Mario Silva grill burgers and brats to feed several hundred tradesmen working on the Wacker Drive project.

Demolition occurs in front of the Civic Opera House.

see WACKER page 64

Grade beam demolition is done between Randolph and Washington streets.

An aerial overview of the construction at the Congress Street interchange.

This Case 621 wheel loader from McCann Industries found plenty of work on the Wacker Drive project.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 13

Page 14 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact Southeastern Equipment to Check Out the New Models of Case Construction Equipment

New “N” Series Backhoes

New “F” Series Wheel Loaders

New “Alpha” Series Skid Steers

Other Equipment Available Through Southeastern Equipment

Schwarze Street Sweepers

Terex Roadbuilding Pavers

Schwarze Asphalt Patchers

Carlton Wood Chippers

Etnyre Distributors & Chip Spreaders

Vacall Sewer Equipment

New CX55B Compact Excavator

New “C” Series Excavators

Cambridge, OH 740-432-6303

Monroe, OH 513-539-9214

Heath, OH 740-522-3500

Burlington, KY 859-586-6133

North Canton, OH 330-494-3950

Mentor, OH 440-255-6300

Mansfield, OH 419-529-4848

Novi, MI 248-349-9922

Gallipolis, OH 740-446-3910

Perrysburg, OH 419-874-0331

Marietta, OH 740-374-7479

Holt, MI 517-694-0472

Dublin, OH 614-889-1073

Brunswick, OH 330-225-6511

Brilliant, OH 740-598-3400

Bomag Recyclers / Stabilizers

Eagle Crusher Plants

www.southeasternequip.com

HCEA Announces Two Firms Join as Corporate Members The Historical Construction Equipment Volvo Construction Equipment is one Association (HCEA), a 501(c)3 non-profit of the world’s oldest industrial firms organization dedicated to preserving the his- engaged in construction equipment mantory of the construction, dredging and sur- ufacturing, tracing its roots to a machine face mining equipment industries, shop founded in Eskilstuna, Sweden, by announced that Taylor Machine Works and Johan Thefron Munktell in 1832. Today, Volvo Construction Equipment have joined it has plants in Sweden, Germany, the HCEA as corporate members. France, Poland, the United States, Taylor Machine Works Inc., located in Mexico, Brazil, Korea, China and India, Louisville, Miss., is possibly the only pri- and its products and services are offered vately held industrial lift truck manufacturer operating in America today. Founded by W. A. Taylor Sr. in 1927 as a small family-owned automotive and repair business, Taylor is now under the leadership of the third generation of the Taylor family, and its “Big Red” forklifts have made an impressive impact in the materials handling equipment industry worldwide. The American Heritage “Big Red” Fire Museum also is in Louisville; founded in 1989 by W. A. Taylor Jr., it houses more The first Michigan wheel loader, this model 75A, was than 100 vehicles and exhibits as donated to the National Construction Equipment Museum in the late 1990s. old as the late 1700s.

Equipment Museum, operated by the HCEA in Bowling Green, Ohio, has two Michigan wheel loaders including the first one produced, and an MRS 150AGT wheel tractor in its collection, and its Archives house substantial collections of records from both companies. Volvo Construction Equipment donated one of the loaders and a sizeable volume of archival records directly to the HCEA. Corporate members designate up to five of their officers and employees to receive the The National Construction Equipment Museum HCEA’s quarterly magazine, also owns this circa 1950 M. R. S. 150AGT wheel Equipment Echoes, and VIP tractor. passes to its annual International Convention and Old Equipment in more than 125 countries through proExposition, to be held at its Bowling Green, prietary or independent dealerships. Ohio, headquarters Sept. 14 through 16, Volvo also has acquired a number of 2012. They also receive links on the HCEA’s other historic firms, including the Web site at www.hcea.net and are publicized Michigan product line from Clark, Champion motorgraders, Akkerman in Equipment Echoes and in press releases to excavators, Blaw-Knox paving trade publications and Web sites. For more information, call 419/352-5616 machines and Samsung excavators. The National Construction or visit www.hcea.net.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 15

USED EQUIPMENT 1974 CMI SUBURBAN 56-120

1993 BLAW KNOX PF400A

2006 CAT D6R DS XL

2007 CAT 924G

Slipform paver, 12’-24’, CAT 3306 Engine, Float Pan, Hyd. Vibrators, Auto Float.......... ............................................................$34,000

3845 Hrs, OMNI-1A Screed, John Deere Engine, Diesel Heat, Truck Hitch, Dual Controls ..........................................$21,000

S/N GJB00513, 3000 Hrs, Cab, A/C, SU Blade, Ripper Hydraulics ............$205,000

s/n RTA00851, cab, a/c, 2.3yd bucket, Tier ll engine ........................................$115,000

2005 CAT 385C

2008 CAT 953D

2007 CAT 365C

2005 CAT D6R

s/n EDA00220, 4159 Hrs, GP Boom, 14’5” Stick, CWT Removal Devise, 84” Bkt HB Linkage ........................................$566,000

1049 Hrs, Cab, A/C, Joystick Control, 2.25cyd Bkt, Ripper......................$160,000

4438 Hrs, 25’ Boom, 13’7” Stick, Counterweight Removal Devide, 60” Bkt ......................................................$335,000

s/n AFM00164, 5287 Hrs, Cab, A/C, SU Blade ............................................$135,000

2006 BOBCAT S160

1994 CAT 5130

2008 CAT 908H

1996 GOMACO GT3600

1473 Hrs, 80% Tires, Extra Duty Tread, 72” Grapple Bkt..............................$18,000

Front Shovel, Idled 2009, Component Rebuild History Available............$325,000

s/n MXF00268, 626 hours, cab, a/c, 1.4yd gp bucket, forks ............................$91,500

1515 hours, Molds available ........$60,000

2005 CAT 950Gll

2007 CAT D5G XL

2008 BOBCAT 435G

2010 MORBARK 4600XL

5700 hours, A/C, 3.75 yd Bucket, Joystick Control, Ride Control ..................$145,000

s/n WGB03871, 1461 Hrs, OROPS, Heater, Lights ..............................................$64,500

1001 Hrs, 12 & 24” Bkt, 950 Breaker ........ ........................................................$40,000

400 Hrs, Cat C27 Engine, Auto Reversing Fan, Magnetic End Pully..............$575,000

Rod Byers 636-680-1579 rod.byers@fabickcat.com

1 Fabick Drive, Fenton, MO 63026 www.fabickcat.com “To Ever Serve Our Customers Better”

Dave Modglin 636-680-1588 dave.modglin@fabickcat.com

Page 16 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

10’ Service Van $32,995

15’ Cube Van $29,995

Aluminum Utility Van $33,995

Plow Truck $32,995

Work Van $21,995

4x2 Service Body $28,995

9’ Crew Dump $39,995

12’ Cube Van $28,995

4x2 Ext Service Body $31,995

4x4 8’ Flatbed $30,995

Diesel Flatbed $38,995

11’ Dump $37,995

4x4 Service Body $32,995

Hot Shot Food Delivery $34,995 4x4 Red Service Body $32,995

Utility Van $32,995

12’ Dually Cube $31,995

Aluminum Service Body $30,995 Ext. Red Service Body $34,995 ‘09 12’ Cube Van, 83K Miles $16,985 12475 Plaza Drive, Eden Prairie, MN 55344

www.suburbanchev.com

866-849-6234

*All Sale Prices Include Manufacturer Rebate & Commercial Rebate For Qualified Commercial Customers To Dealer, Not Including Tax Or License.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 17

Page 18 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GO WITH KOMATSU... AND GET THE ONLY TIER 4 INTERIM EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:

• Lower your cost of ownership M • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

MIDWEST KOMATSU DISTRIBUTORS

AIS Construction Equipment Corp. www.aisequip.com MI Grand Rapids 616-538-2400 Lansing 517-321-8000 Northeast Detroit - Lenox 586-727-7502 Saginaw - Bridgeport 989-777-0090 Traverse City - Williamsburg 231-267-5060

8 I

Berry Tractor & Equipment www.berrytractor.com KS Garden City 800-475-2290 Kansas City 913-829-4600 Topeka 800-864-4509 Wichita 800-283-4246 MO Springfield 800-864-7995

Custom Made Products Co. Humboldt, IA (800) 760-7871 Call Anytime

We W ill Not Be Undersold!

Free e D livery!

18yd Ashland I-180 TS2s (New & Used) Call

11yd Ashland I-110 XL2s (New & Used) Call

GRADERS

BIG DOG

Art’s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call All sizes available for either Manufacturer

8yd Big Dogs, (New & Used) ........................................................Call

ASHLAND 18yd Ashland I-180 TS2s, (New & Used) ....................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (New & Used) ....................................Call 13yd Ashland I-130 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (New & Used) ....................................Call 11yd Ashland I-110 XL2s, (New & Used) ....................................Call 9yd Ashland I-900’s & I-950’s, (New & Used)..............................Call Ashland Groundhog GH2500, (New & Used) ................................Call

5yd Big Dogs, (New & Used) ........................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call

NEW & USED ROWSE 7yd Rowse Model 7002 & 7004....................................................Call 5yd Rowse Model 7002 & 7004....................................................Call 3yd Rowse Model 3002 ................................................................Call

MISCELLANEOUS 1 1/2yd & 3yd Durabilts Model DP60 & DP84, (New & Used) ....Call

12yd Garfield Model 1150s, (New & Used)..................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

3/4 yd G&A Mini Scraper, (New & Used)......................................Call 8’ Hoelscher PT-8 Lawn Roller, (New) ........................................Call 4’ Dura Grade Model DG4E Electric Lift, (New) ..........................Call

A 8 F

Columbus Equipment

6 1/2yd Big Dogs, (New & Used) ..................................................Call

GARFIELD

www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 South Bend 574-233-8770 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

www.gncmp.com

www.smallstep.gov

www.columbusequipment.com OH Cadiz 740-942-8871 Canton 330-453-4521 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681

Brandeis Machinery & Supply Company

70 to 80 Scrapers on Hand at 8 Locations FOR SALE OR FOR RENT Iowa Locations: Humboldt, Huxley, De Soto, Iowa Falls, Union, Manchester, Dunlap Nebraska Location: Tecumseh

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 19

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

DASH 10 EXCAVATORS

General Equipment & Supplies

From Komatsu - The Excavator Experts

www.genequip.com ND Bismark 800-279-4437 Fargo 800-437-2924 Minot 800-825-0479

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Company www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 218-741-9011 • 800-555-1455 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8671 • 800-888-9535 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 • 800-826-9608 Carterville 618-985-3399 • 800-274-7202 Marengo 815-923-4966 • 800-765-2635 Springfield 217-789-7711 • 800-252-2926 IN Portage 219-764-8080 • 888-764-8226 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 • 800-274-7230 Cape Girardeau 573-334-5252 • 800-274-7210 Columbia 573-814-0083 • 800-274-7212 Palmyra 573-769-2056 • 800-274-7214 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

Komatsu Dash 10 excavators provide increased horsepower, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs. t Efficient Komatsu Tier 4 Interim engines and advanced hydraulic system maximize productivity while providing up to 10% lower fuel consumption t Enhanced operator environment improves comfort and machine control t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.komatsuamerica.com www.komatsuamerica.com

Page 20 â&#x20AC;˘ October 29, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2007 Komatsu D65EX-15; #81435, Cab/AC, Sweeps, Rear & Side Screens, 1700 Hrs............ ............................................................$179,500

2006 Komatsu PC220LC-8; #81393, Cab/AC, Hyd Thumb, 4100 Hrs ........................$119,500

2007 Komatsu WA250-5; #81402, Cab/AC, QC/3 Yd Bkt, 3rd Valve, 3100 Hrs ......$109,500

2003 Komatsu WA180-3; #91531, Cab/AC, JRB QC, 17.5-25 Tires, 8700 Hrs ................$39,500

2004 Ingersoll-Rand SD45D; #80792, OROPS, 54â&#x20AC;? Smooth Drum, 800 Hrs ..................$46,500

2003 Komatsu D65PX-15; #80775, Cab/AC, 36â&#x20AC;? Shoes, Drawbar, 5400 Hrs............$129,500

2007 Komatsu PC300LC-8; #81387, Cab/AC, 13â&#x20AC;&#x2122; Arm, 33.5â&#x20AC;? Tracks, 1500 Hrs ........$189,500

2006 Komatsu PC400LC-7EO; #81398, 13â&#x20AC;&#x2122; Arm, 35.5â&#x20AC;? Shoes, JRB QC, HKX Kit, 5100 Hrs .. ............................................................$189,500

2005 Komatsu PC228USLC-3; #81385, Cab/AC, Aux Hyd, 2475 Hrs..............................$129,500

2000 Komatsu D61EX-12; #81476, Cab/AC, PAT Blade, 5475 Hrs ............................$59,500

1999 Komatsu WA120-3; #81405, Cab/AC, QC/Bkt/Forks, 6875 Hrs ........................$49,500

2002 Komatsu CD60R-1; #81226, Roadliner Tracks, 2600 Hrs ..................................$79,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 21

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2005 VOLVO EC210B LC, Stk #: UEF097; 3,817 Hrs; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Cntl Change $84,000

2001 VOLVO L330D, S/N: 61108; 11,000 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ..................Call

2004 VOLVO L60E, Stk #: UDA367; 5,259 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.2CY Bucket w/BOE ..................................$84,500

2007 VOLVO A40D, S/N: 13747; 3,210 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............ ..........................................$339,000

EXCAVATORS

1996 VOLVO A25C, S/N: 60795; 10,500 Hours; A/C, CONTRONICS, 23.5-25 TIRES .... ..........................................................$89,000 1996 VOLVO A25C, S/N: 60790; 10,500 Hours; A/C, CONTRONICS, 23.5-25 TIRES .... ..........................................................$89,000 1993 VOLVO A25C, S/N: 8072; 12,000 Hours; HEATER. 23R25 TIRES 10%, BODY HEAT, 6X6 ....................................................$59,000 2007 VOLVO A40D, S/N: 13874; 3,491 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............................................$339,000 2006 VOLVO A40D, S/N: 13033; 4,488 Hours ........................................................$279,000 2006 VOLVO A40D, S/N: 13152; 4,441 Hours ........................................................$279,000 2005 VOLVO A40D, S/N: 12171; 3,753 Hours; A/C, CONTRNICS, 29.5R25 TIRES, TAILGATE ........................................................$275,000 2005 VOLVO A40D, S/N: 70051; 6,311 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TAILGATE, BODY HEAT ..........................$259,000 2005 VOLVO A40D, S/N: 12173; 5,312 Hours; AC, CONTRONICS, 29.5R25 TIRES, TAILGATE ........................................................$259,000 2004 VOLVO A40D, S/N: 11341; 3,433 Hours; AC, CONTRONICS, 29.5-25 TIRES (90%), TAILGATE ........................................$285,000 2004 VOLVO A40D, S/N: 11223; 4,790 Hours; A/C, Contronics, 29.5R25 Tires ......$275,000 2004 VOLVO A40D, S/N: 11026; 4,254 Hours; A/C, CONTRNICS, 29.5R25 TIRES ..$269,000 2003 VOLVO A40D, S/N: 10772; 5,834 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$265,000 2003 VOLVO A40D, S/N: 10826; 7,321 Hours; A/C, CONTRNICS, 29.5R25 TIRES ..$199,000

2002 VOLVO A40D, S/N: 60169; 7,465 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$195,000 2002 VOLVO A40D, S/N: 60138; 8,291 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TAILGATE ................................................$185,000 2001 VOLVO A40D, S/N: 60060; 8,180 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$195,000 2001 VOLVO A40D, S/N: 60058; 8,236 Hours; A/C, CONTRNICS, 29.5R25 TIRES ..$169,000 2000 VOLVO A40D, S/N: 10090; 8,801 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$169,000

2005 VOLVO L70E, Stk #: UDI638; 6,271 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.5CY Bucket w/BOE .............. ..........................................................$87,500 2004 VOLVO L70E, Stk #: UFI340; 9,961 Hours; Cab, A/C, Contronics, Hydraulic Attachment Bracket, Front Diff Lock, 2.9cy Bucket, 20.5R25 Tires ......................$73,500 2003 VOLVO L90E, Stk #: UBA183; 8,136 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 3.5CY Bucket w/BOE .............. ..........................................................$99,000 2005 VOLVO L110E, Stk #: UJJI424; 3,540 Hours; Cab, A/C, Hyd Attachment Bracket, 23.5R25 Tires, 4.1CY Bucket w/BOE$127,500 2010 VOLVO L110F, 447 Hours; Cab, A/C, Radio w/CD, Boom Susp, 3rd Function, Block Heater, 4.4cy Bucket, 23.5R25 Tires .............. ........................................................$212,500 2005 VOLVO L220E, Stk #: UBF297; 16,656 Hours; Cab, A/C, Radio, Return to Dig, Boom Susp, 7cy Bucket w/BOE, 29.5R25 Tires, Recent Transmission ......................$109,000 1999 VOLVO L330C, S/N: 60392; 22,268 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ........................................Call 1996 VOLVO L330C, S/N: 60125; 22,031 Hours; Cab, A/C, Contronics, Boom Susp, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires..........................................................Call 2001 VOLVO L330D, S/N: 61108; 11,000 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ........................................Call

2005 VOLVO EC210B LC, Stk #: UEF097; 3,817 Hours; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Control Change......................$84,000 2003 VOLVO EC210B LC, S/N: 843; 8,356 Hours; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Geith Pin Grabber, 48" Bucket ..........Call 2004 VOLVO EC360B LC, Stk #: UBF800; 4,702 Hours; A/C, 36" pds, 12'10" stck, Aux hyd, Q/C piping, Pilot pat cntrl ................Call 2003 VOLVO EC360B LC, Stk #: UJJ616; 5,509 Hours; 12' 10"' ARM; AC; RADIO; 36" PADS; 70% UC; 54" P/O BUCKET; PILOT PATTERN CONTROL CHANGE ........................Call 2003 VOLVO EC460B LC, Stk #: UJGF433; 3,472 Hours; A/C, Radio, 36" Pads, 15'9" Stick, Pilot Pattern Control Change, Aux Hyd, 66" Bucket........................................$179,500

GENERATOR SETS VOLVO 320 KW, S/N: 2012638315; 320 KW .. ................................................................Call 2006 VOLVO 500 KW, For Sale or Rent. Call Denny or Brek for price & details. Skid Unit .. ................................................................Call 2006 VOLVO 500 KW, S/N: 021732; 7,588 Hours; Volvo 500 kw in a trailer ..............Call 2005 VOLVO 500 KW, S/N: 021732; For Sale or Rent. Call Denny or Brek for price & details. Skid Unit ......................................Call

OFF HIGHWAY TRUCKS 2007 VOLVO A40D, S/N: 13747; 3,210 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............................................$339,000

WHEEL LOADERS 2004 VOLVO L60E, Stk #: UDA367; 5,259 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.2CY Bucket w/BOE .............. ..........................................................$84,500 2004 VOLVO L60E, Stk #: UDH430; 7,451 Hours; Cab, A/C, Hyd Attachment Bracket, New 20.5R25 Tires, 2.2CY Bucket w/BOE ...... ..........................................................$84,500 2002 VOLVO L70D, Stk #: UDG937; 1,907 Hours; Cab, Contronics, Boom Susp, Hyd Attachment Bracket, Limited Slip Diff, 2.5cy Bucket, 20.5-25 Tires ........................$89,500 2002 VOLVO L70D, Stk #: UFF989; 10,497 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5-25 Tires, 2.5CY Bucket w/BOE................ ..........................................................$67,500 2005 VOLVO L70E, Stk #: UBG916; 2,320 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.5CY Bucket w/BOE .............. ..........................................................$99,000

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.

Page 22 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bale Equipment Solutions Holds Case Triple Threat Rodeo

ale Equipment Solutions, Case Construction Equipment’s newest dealer serving central Kentucky and southern Indiana, made a big splash at the ICUEE trade show by holding a Case Triple Threat Rodeo Oct. 4 to 6. While the event helped introduce Bale Equipment Solutions as a local Case dealer, the rodeo also proved to be a big draw for Case Equipment Company. Along with many local contractors, equipment operators from around the country stopped by to compete in the event. Case’s Triple Threat Rodeo consists of three events, which use the Case N Series loader/backhoe, the F Series wheel loader and the Alpha Series skid steer: • Backhoe Bronc Buster — the backhoe is used in a series of obstacles, which includes the use of soccer and tennis balls. • Wheel Loader Roundup — contestants use a wheel loader to pick up various transport bars off their bases and carry/move to other areas across the event space. • Skid Steer Showdown — a bar is attached to the bucket and the contestant must carry two soccer balls (and one floating soccer ball inside of bucket) while maneuvering around cones and through Fassemblies to the final destination, without dropping the soccer balls. The winner for the Bale Equipment Solutions’ event was Rick Greeno of Kenosha, Wis. Case Dealers from around the United States and Canada have been holding Case Triple Threat Rodeo competitions in search of the most highly skilled equipment operators to compete in the North American Championship. The Championship is scheduled to be held at the World of Concrete in Las Vegas in January 2012. Winning competitors from each local event are awarded a trip for two to Las Vegas, $500 and a commemorative Triple Threat Rodeo belt buckle. At each Case Triple Threat Rodeo event, money also is being raised for Habitat for Humanity. Bale Equipment Solutions event raised $500 to contribute to the charity. Bale Equipment Solutions, established in 2004 as Bale Equipment Rentals & Sales, is a full-line construction equipment dealership providing new and used construction and heavy equipment sales, rentals, parts and service in the Louisville, Ky., metropolitan area and surrounding counties. see RODEO page 34

(L-R): Bale’s Glen Gish is joined by Case Construction Equipment’s Ion Warner, Sheri Talley and Don Miller of Bales and Case Construction Equipment’s Curtis Goettel to keep things running smoothly at the rodeo.

Bryan Zirkle of Pioneer Electric, based in Piqua, Ohio, keeps his cool on this Case 580 Super N backhoe.

James St. John of Central Iowa Water Association takes a Case 221E Series 3 loader through the course.

Shannon Climer of Murtco Inc., Paducah, Ky., takes part in the competition with this Case SR200 skid steer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 23

Page 24 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 25

West Side Tractor Sales Co. www.westsidetractorsales.com

888-504-0231

Naperville, IL

Page 26 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW!

Gradall XL4300II Excavator 1:32 Scale $80 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ............$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale......................$200 Allis-Chalmers 45 Motor Grader, 1:50 Scale ..............$100 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$70 Bantam C-35 Crawler Shovel, 1:50 Scale ......................$70 Bantam Truck Mounted Shovel or Backhoe; 1:50 Scale .... ..........................................................................................$95 Bobcat A300 Wheel Loader, 1:25 Scale ........................$30 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader ..............................................................................$45 Bobcat M-743 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat S175 Skid Steer Loader, 1:50 Scale..................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale..................$40 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale..................................................................$65 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$50 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$90 Case Conrad 580 Super R Backhoe, 1:50 Scale ........$175 Case CX210B Excavator, 1:50 Scale..............................$40 Case 330B Articulated Truck, 1:50 Scale ......................$35 Case 580Super N Backhoe/Loader, 1:50 Scale ............$45 Case 621E Wheel Loader, 1:50 Scale ............................$35 Case 1850K Dozer, 1:50 Scale ........................................$40 Caterpillar 4-Piece Earthmover Set, 1:64 Scale ............$90 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ............................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar CT660 Dump Truck, 1:50 Scale....................$80 Caterpillar CT660 Tractor Trailer, 1:50 Scale ................$90 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$65 Caterpillar D6T XW Track-Type Tractor ........................$70 Caterpillar D8R Track Type Tractor, 1:50 Scale ............$55 Caterpillar D10T Track Type Tractor, 1:50 Scale ..........$85

Link Belt 80100 Rough Terrain Crane 1:50 Scale $175

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$85 Caterpillar D11T Track Type Tractor, 1:50 Scale ..........$90 Caterpillar 24H Motor Grader, 1:50 Scale ......................$90 Caterpillar 14M Motor Grader, 1:50 Scale......................$75 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ......$35 Caterpillar 297C Multi-Terrain Loader, 1:32 Scale ........$45 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ................$45 Caterpillar 320D Excavator, 1:50 Scale..........................$65 Caterpillar 365B Excavator, 1:50 Scale..........................$70 Caterpillar 374D Excavator, 1:50 Scale ........................$110 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$70 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $40 Caterpillar 725D Articulated Truck, 1:50 Scale ............$65 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$75 Caterpillar 785D Mining Truck, 1:50 Scale ..................$145 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $45 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$65 Caterpillar 963D Track Loader, 1:50 Scale ....................$60 Caterpillar 977 Traxcavator, 1:50 Scale ........................$50 Caterpillar 988H Wheel Loader, 1:64 Scale ..................$35 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$80 Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$55 Gradall XL4300II Excavator, 1:32 Scale ........................$80 Grove GMK 4115L Truck Crane, 1:50 Scale ................$250 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$65

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

International TD-15 Dozer, 1:87 Scale............................$45 International TD-24 Ag/Crawler, 1:50 Scale ..................$40 International TD-24 Military Dozer, 1:50 Scale ..............$50 International TD-25 Dozer, 1:87 Scale............................$45 International 350 Payhauler, 1:25 Scale ......................$285 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$55 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$85 John Deere 400D Articulated Truck, 1:50 Scale ..........$45 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale....$35 John Deere 850J Crawler Dozer, 1:50 Scale ................$40 John Deere 850K Dozer, 1:50 Scale ..............................$55 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$65 Komatsu D51 EX Dozer, 1:50 Scale ..............................$65 Komatsu D51 PX Dozer, 1:50 Scale ..............................$65 Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu GD655 Motor Grader, 1:50 Scale....................$65 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$75 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$80 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$235 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$45 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$45 Komatsu WA470 Wheel Loader, 1:50 Scale ..................$75 LBX 210 X2 Excavator, 1:40 Scale ................................$75 Link-Belt 3200 All Terrain Crane, 1:50 Scale ..............$195 LeTourneau Super C Scraper w/Cab, 1:50 Scale..........$80 LeTourneau Military Super C Scraper, 1:50 Scale ........$50 Northwest 25-D Backhoe, 1:50 Scale ............................$85 Northwest 25-D Shovel, 1:50 Scale................................$70 Terex PPM AC40/2L ATC, 1:50 Scale............................$190 Terex 860sx Backhoe Loader, 1:50 Scale ....................$110 Vogele Super 700 Small Paver, 1:50 Scale....................$75 Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$155 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$50 Volvo L90E Wheel Loader, 1:50 Scale ..........................$75 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............$85

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 27

Page 28 â&#x20AC;˘ October 29, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Tax $aving $pecials #1

11 Cabs & Chassis in Stock Now!

#1Corp. Chrysler Commercial Dealer in Commercial Dealer inMinnesota Minnesota

FURY MOTORS South St. Paul, Minnesota Dick Reineck 651.251.8214 direct

We Deliver!

rreineck@furymotors.com

*SALE PRICES REFLECT ALL COMMERCIAL REBATES AVAILABLE DEDUCTED AT TIME OF AD PLACEMENT.

2012 Ram 3500 Dually Crew 4x4 H/O Cummins, Max Tow Pkg. A/C, Auto & More, Dually â&#x20AC;&#x153;No Ureaâ&#x20AC;?, Stk# NO180

MSRP $49,175

$avings $ale $41,499

2012 Ram 3500 STD

2011 Ram 1500 HD STD

Cab & Chassis 4x4, Hemi, Auto Trans, DT PL T/C, A/C, HD Package, Reading Service Body Class 5 Hitch, Stk# NO060

Cab, Hemi, T/Tow, Auto, A/C, Long Box, Anti Spin HD Package, Stk# L1227

MSRP $24,700

MSRP $43,011

$avings $ale $35,999

$avings $ale $18,409

2011 Ram 3500 STD

2011 Ram 4500 STD

2011 Ram 2500 HD STD

2011 Ram 3500

2012 Ram 2500 HD

2012 Ram 2500 Larame

Cab & Chassis, 4x4, HD Package, Hemi, Auto Trans, A/C, PW Crysteel Tipper & Tool Box, Boss 9â&#x20AC;&#x2122; Straight Plow, Stk# L0000

Cab & Chassis, 4x4, H/O Cummins, MAXTON, Auto Trans, PTO, PW, PL, T/C, A/C, Rugby Aluminum Body & Toolbox, Hiniker 9â&#x20AC;&#x2122; Plow, Stk# LO205

Cab & Chassis, 4x4 Hemi, TTow, Auto Trans, A/C, Plow Pkg. Long Box, Anti Spin, HD Pkg. Hiniker Plow, Stk# L1601

Crew Cab & Chassis 4x4, H/O Cummins, Auto Trans, PTO, PW PL TK A/C, Keyless, Much More, All Wheels Aluminum, Hauler & 2 5/16 Ball Hitch & Class 5 Hitch, Stk# L0002

Crew 4x4, Hemi, HD PKG. PW, PL, T/C A/C Auto Trans, Anti Spin, Plow Pkg., Stk# N0059

Crew 4x4, Leather, Max Tow, H/O Cummins, Snow Plow Pkg. â&#x20AC;&#x153;No Ureaâ&#x20AC;?, Stk# N0161

MSRP w/Plow $47,800 MSRP w/out Plow $42,819

MSRP w/Plow $62,585 MSRP w/out Plow $57,199

$avings $ale w/Plow $38,688 w/out Plow $33,797

$avings $ale w/Plow $51,899 w/out Plow $46,699

MSRP w/Plow $39,575 MSRP w/out Plow $34,080

MSRP $56,482

MSRP $39,395

MSRP $60,750

$avings $ale w/Plow $31,499 w/out Plow $26,299

$avings $ale $47,999

$avings $ale $32,599

$avings $ale $47,149

563-872-4112

'8%848( %(//(98( ,2:$

::: --6&+(&.(/ &20

CUSTOM REBUILD DIVISION TOP QUALITY, non-union, independent EMPLOYEES that care deeply for our customers, working in a TOP QUALITY FACILITY in Iowa, equals TOP QUALITY EFFICIENCY! Â&#x2021; &203/(7( 0$&+,1( Custom Rebuilds, Remans & Repowers Â&#x2021; ,1',9,'8$/ &20321(17 Rebuilds & Repairs Â&#x2021; 2(0 35,9$7( /$%(/ Contract Remanufacturing, Rebuilding & Mechanical Service

Please contact Josh Scheckel for any of your service requirements, call 563-872-4112, or email JOSH@JJSCHECKEL.COM

3$576 ',9,6,21

CAT D10 REMAN

Call today for the BEST PRICES on UNDERCARRIAGE and REPAIR PARTS in the Industry! Â&#x2021; $// 0$.(6 $// 02'(/6 81'(5&$55,$*( Â&#x2021; 1(: 3$576 Â˛ 86(' 3$576 Â˛ &20321(176 Â&#x2021; 3$576 (1*,1((5,1* 0$18)$&785,1* Â&#x2021; :$55$17< Â˛ 48$/,7< Â˛ 12 +$66/( Along with our regular customers we welcome dealers and resellers to join our distribution network.

For parts please call 563-872-4112, or email PARTS@JJSCHECKEL.COM

(48,30(17 5(17$/ $1' 6$/(6 ',9,6,21 75$&. 7<3( 75$&7256 2003 DEERE 750C LGP................................$78,000 Transport and Financing available. 97/2012 CAT D11R Complete Reman.............. CALL!! 2005 DEERE 650J LGP................................ $51,000 Detailed pictures/descriptions at 97/2012 CAT D10R Complete Reman............ CALL!! 1987 CAT 963 TRACK LOADER Nice............ $24,500 ::: --6&+(&.(/ &20 97/2012 CAT D9R Complete Reman................ CALL!! &203$&7,21 ',57 35(3 1999 CAT D10R Full Specs, New UC............$445,000 (9) 48â&#x20AC;? & 60â&#x20AC;? SHEEPSFOOT........... $4,500-$18,500 2006 CAT D9T Full Specs, New UC.............. $445,000 (2) 2009 HOLMES ROLLERBLADES.......$19,000 EA (2) 01/02 CAT D9Râ&#x20AC;&#x2122;S New UC...........$235-$255,000 (4) ROME OFFSET DISKS............. $12,500-$19,000 1999 CAT D9R 100% UC, Full Specs............$265,000 27+(5 (48,30(17 (2) 97/98 CAT D6R LGP Full Specs........ $105,000 EA 1999 CAT D6M XL Enclosed Cab................... $69,000 1981 GROVE RT 740 CRANE ...................... $88,000 2005 CAT D6N XL Only 2,800 hours!.............$93,000 2007 CAT 320DL Low Hours!..................... $139,000 1993 CAT D6H SERIES II Great Condition!... $65,000 2007 FECON FTX140 Crawler Mulcher........ $85,000 2000 CAT D5M XL Runs Very Well! ...............$44,000 (2) 2005 NOBLE 417B Scrapers............. $35,000 EA 1986 CAT D5H LGP Priced to Sell!................ $29,600 1998 DEERE 7810 MFWD TRACTOR.......... $66,000 1992 CAT D5H SERIES II Priced to Sell!........$38,000 (4) 2007 MISKIN DW25â&#x20AC;&#x2122;S..................... $75,000 EA 2006 CAT D9T CALL!! 1996 CAT D5H LGP Here is a Nice One! ....... $39,000 ATTACHMENTS, RIPPERS, BLADES...............CALL!! NEW UC! $445,000 For equipment rental and sales call 563-872-4112, or email SALES@JJSCHECKEL.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 29

Redefining the hauler – again. Let’s work. Get to Nuss Truck & Equipment for the newest Volvo haulers, setting new standards in the market that Volvo created and continues to lead. Get the control you need with safe operation at high hauling speeds. Enjoy exceptionally short turning circles, perfect for confined areas and tight turning haul roads. Heavy-duty frames and load bodies are designed for severe off road operation and long service life. Powerful, load sensing hydraulic systems raise the body with precision and control – even on steep downhill gradients. Volvo V-ACT engines provide high torque at low engine speeds, for leading fuel efficiency. Get your Volvo hauler at Nuss today and start hauling more productivity.

BU R NSV I LL E, MN BURNSVILLE, MN ( 800 ) 552-1189

DULUTH, D U LU T H , M MN N ( 8 0 0 ) 8 35 - 6 2 2 5

M MANKATO, A N K ATO, M MN N ( 8 0 0 ) 86 2 - 6 2 25

ROC H EST E R , MN ROCHESTER, MN ( 800 ) 562-1505

ROSEVILLE, R OS E V I L L E , M MN N ( 8 0 0 ) 7 0 4 - 0 9 35

S ST. T. C CLOUD, LOU D, M MN N ( 888 ) 310-6225

TO TOOLS OLS THAT MAKE YOU R B USI N ESS WO WORK™ R K™

VVolvo ollvo CConstruction onsstru truction Equipment Equipment

Page 30 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138. The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $42 and a 350 watt unit sells for $133.

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

Detroit-Windsor Bridge Future Again in Doubt BRIDGE from page 1

Snyder said a cooling off period would allow time to talk to lawmakers about “any miscommunication or misinterpretation that might have taken place over the last couple days.” The Snyder administration has hinted it might act unilaterally to try and get Michigan involved in the project if the Legislature doesn’t cooperate. But the focus now remains on the Legislature. Snyder said the New International Trade Crossing is crucial to expanding trade between the United States and Canada. Many businesses, including automakers, also covet a new bridge with more convenient highway connections. But the private owners of the Ambassador Bridge already spanning the Detroit River oppose a second bridge, saying a publicly supported bridge would unfairly compete with their own. The new bridge would be built 2 mi. south of the Ambassador, which has proposed expanding its own capacity. Some Republican lawmakers side with Ambassador Bridge owner Manuel “Matty” Moroun and have balked at backing the separate bridge, making it hard for Snyder to secure the votes needed to begin the project. Snyder said Michigan taxpayers wouldn’t be on the hook for the new bridge, which would be privately financed, built and run. He said the bill is drafted to make sure taxpayers are protected. The Ambassador Bridge owners and their supporters are skeptical of that claim. Ambassador Bridge owners have lobbied heavily and run television commercials criticizing the bridge proposal. Canadian officials are so confident the New International Trade Crossing will be built that construction has begun on a road that would link to it. Canada has pledged to cover Michigan’s $550 million share to build a plaza on the U.S. side of the bridge, eventually recouping the money from tolls. The estimated price of a new bridge, toll and customs plazas, and expressway linkups is nearly $4 billion. Many Republicans have questions about traffic projection and use of Canadian money in the project. Others, including Sen.

Mike Kowall of Oakland County’s White Lake Township, say presidential or federal permits should be in place before Michigan proceeds. “I don’t think there’s been enough background work done yet,” said Kowall, chairman of the Senate’s Economic Development Committee. Kowall was joined by Republicans Goeff Hansen of Hart and Mike Nofs of Battle Creek in voting against the bill. Judy Emmons of Sheridan and Dave Hildenbrand of Lowell voted in favor of the committee legislation. Senate Democrats said Republicans broke an agreement to include some protections for residents and businesses in Detroit’s Delray community where the bridge would be built on the U.S. side. Democrats want agree-

“The plan calls for Delray to be torn apart by the new bridge. I could not as an elected official allow that to happen without making sure there were community protections in place.” Virgil Smith D-Michigan

ments to deal with noise, health and other concerns related to the bridge construction. Republicans defeated a proposed substitute bill that would have included those socalled community benefits provisions. With those eliminated, Democrats Tupac Hunter and Virgil Smith of Detroit abstained from voting on the committee’s final version of the legislation. “The plan calls for Delray to be torn apart by the new bridge,” Smith said. “I could not as an elected official allow that to happen without making sure there were community protections in place. With the community protection agreement not being added to the bill, I could not support it.” Snyder said he is supportive of community benefits.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 31

www.rdousedequipment.com ARTICULATED TRUCKS 2006 JOHN DEERE 400D, STK# X324124, CAB/AC, 29.5R25, TGATE, BLINER, BX HT, 8691 HRS ......................................................................$155,500

BACKHOE LOADERS 1989 JOHN DEERE 510C, STK# X321394, CAB/HT, 4 X 4, EXTENDABLE, 8783 HRS ..........................................................................................$20,000 CASE 580E, STK# X330918, ROPS, 2WD, STD STK, 4039 HRS ......$12,000 1987 CASE 580K, STK# X330886, CAB/HT, 2WD, STD STK, 9969 HRS ........ ..........................................................................................................$12,000 1995 CASE 580L, STK# X331911, ROPS, 2WD, EXT STK, 3839 HRS............ ..........................................................................................................$20,000 2006 JCB 3CX, STK# X281695, CAB/AC, W4X4, EXT STK, PLT CNTRL, RC, 30”, 3320 HRS ..................................................................................$40,500 2008 JOHN DEERE 310SJ, STK# X321551, CAB/AC, 4X4, EXT STKXRC, PILOT, AUX,24’, 3733 HRS ................................................................$67,000 2001 JOHN DEERE 310SG, STK# X327346, CAB/HT, 4X4, EXT STK, 24”, 3571 HRS ..........................................................................................$44,000

2008 BOBCAT 435H FAST TR ..............$37,200

CRAWLER DOZERS

WHEEL LOADERS 2007 CAT 928G, STK# X261081, CAB/AC, 20.5/25, 3YD, 12,834 HRS .......... ..........................................................................................................$64,500 2008 JOHN DEERE 624J, STK# X318966, CAB/AC, 20.5R25, RC, 3.5YD, QC, 2845 HRS ........................................................................................$165,000 2009 JOHN DEERE 544K, STK# X317944, CAB/AC, DDL, HILIFT, AUX, RC, CPLR, 588 HRS................................................................................$160,000 2006 JOHN DEERE 544J, STK# X327635, CAB/AC, FRT DIFF, JRB QC, 20.5/25, AUX HYD, 4400 HRS ........................................................$112,500 2001 CAT 928G, STK# X325628, CAB/AC, NEW 20.5/25, 5.5 YD, 23,522 HRS....................................................................................................$38,900 2006 JOHN DEERE 624J, STK# X283383, CAB/AC, 20.525, 3.5YD, QC, HILIFT, 13,929 HRS............................................................................$90,000 1975 JOHN DEERE 644B, STK# X274819, CAB/HT, 20.525, 3 YD, 8104 HRS ..........................................................................................................$16,700 1980 FORD A62, STK# X321606, CAB/HT, 17.525, 2.5YD, AUX, 6116 HRS .. ..........................................................................................................$15,000 1996 JOHN DEERE 544G, STK# X319336, CAB/HT, 20.5R25, 2.25YD, QC, AUX, 10,596 HRS ..............................................................................$50,000 1994 JOHN DEERE 644G, STK# X319537, CAB/HT, 23.5/25, 4YD, QC, 18,587 HRS........................................................................................$40,000 2005 JOHN DEERE 244J, STK# X330469, CAB/AC, 405/70R20 NEW, 1YD, QC, RC, 4358 HRS ............................................................................$40,000 2001 JOHN DEERE 444H, STK# X314224, CAB/HT, DDL, 17.5R25, 2.5YD, 13,474 HRS........................................................................................$42,500 1998 JOHN DEERE 544H, STK# X314225, CAB/HT, 20.5R25, 2.75YD, RC, 10,227 HRS........................................................................................$48,000 2008 JOHN DEERE 544J, STK# X304834, CAB/AC, 20.5/25, 3.25YD, QC, RC, 5000 HRS ..................................................................................$100,000 2003 JOHN DEERE 724J, STK# X312504, CAB/AC, 23.5/25, 4.75YD, QC, RC, AUX, 6324 HRS ........................................................................$129,000 2005 NEW HOLLAND LW110B, STK# X281546, CAB/AC, 17.5R25, 2YD, QC, AUX, 4229 HRS..................................................................................$52,900 1989 VOLVO L90, STK# X273152, CAB/HT, 20.5/25, 3.25YD, QC, 10,399 HRS....................................................................................................$35,000

CRAWLER LOADERS

EXCAVATORS 2006 HITACHI 200CLC, STK# X285340, CAB/AC, LNG ARM, LNG TRK, AUX, 7802 HRS ..........................................................................................$88,015 2010 JOHN DEERE 350DLC, STK# X325086, CAB/AC, 28’ PDS, 10’6” ARM, 338 HRS ..........................................................................................$260,000 2008JOHN DEERE 200D LC, STK# X328480, CAB/AC, 32” PDS, 9’6” ARM, 2645 HRS ........................................................................................$126,000 2005 JOHN DEERE 120CLC, STK# X314108, CAB/AC, 28” PDS, 9’11” ARM, 4419 HRS ..........................................................................................$62,000 2002 JOHN DEERE 160LC, STK# X320919, CAB/AC, MED ARM, LONG TRACK, 10398 HRS............................................................................$33,500 2006 JOHN DEERE 50D, STK# X317116, CAB/AC, 2019 HRS ..........$46,700 2010 JOHN DEERE 35D, STK# X325717, CAB/AC, AUX HYD, CPLR, THUMB, BLADE, 4 HRS ....................................................................$42,250 2004 JOHN DEERE 160CLC, STK# X212889, CAB/AC, LNG ARM, LNG TRK, GP BKT, 9759 HRS ............................................................................$43,900 2008 JOHN DEERE 200D LC, STK# X328758, CAB/AC, 9’6” ARM, 32” PDS, 430 HRS ..........................................................................................$160,000 2009 JOHN DEERE 200D, STK# X318969, CAB/AC, 9’6” ARM, 32” PDS, 48” BKT, 1799 HRS ................................................................................$165,439 2005 JOHN DEERE 200CLC, STK# X315952, CAB/AC, 9’7” ARM, 32” PDS, THMB, 4453 HRS ............................................................................$110,000 2008 BOBCAT 435H FAST TR, STK# X328570, CAB, AC, LNG ARM, AUX, CPLR, BLADE, 30” BKT, 2105 HRS ....................................................$37,200 2008 BOBCAT 435H ZHS FAS, STK# X328569, CAB, AC, LNG ARM, AUX, CPLR, BLADE, 30” BKT, 2069 HRS ....................................................$37,200

MISCELLANEOUS EQUIPMENT

2006 JCB 3CX ......................................$40,500

• Faster Search • Expanded Inventory • Larger Photos

1988 JOHN DEERE 750B, STK# X241128, ROPS, 22” PDS, PAT BLD,6800 HRS....................................................................................................$17,000 1987 CAT D6H, STK# X297683, CAB/HT, 24” PDS, STR BLD, RIPPER8140 HRS....................................................................................................$75,000 1994 JOHN DEERE 650G, STK# X319092, CAB/HT, 24” LGP, PAT, 9402 HRS ..........................................................................................................$25,000 1978 CAT D3, STK# X271246, ROPS, 16” PDS, LT, PAT, WNCH, AUX HYD, 4815 HRS ..........................................................................................$13,400 2006 JOHN DEERE 700J, STK# X325460, ROPS, XLT, 22” PDS, 120” PAT, SIDE BOOM, 1629 HRS....................................................................$160,000 2003 CASE 1650K LGP, STK# X292834, CAB, AC, 32’’ PADS, PAT BLADE, 3810 HRS ..........................................................................................$50,000 1998 CAT 953C, STK# X319210, CAB/HT, 16” PDS, 2YD BKT, 10350 HRS.... ..........................................................................................................$30,000

2007 CAT 928G ....................................$64,500

VISIT www.rdousedequipment.com

1984 MISCELLANEOUS BOMBARDIER C, STK# X282699, CAB, HTR, PERKINS DIESEL, 1338 HRS ............................................................$16,500

MOTOR GRADERS 1977 JOHN DEERE 670, STK# X308515, CAB/HT, 14R24, 14’BLD, 3229 HRS....................................................................................................$19,500 2004 JOHN DEERE 770CH, STK# X303725, CAB/AC, 14/24, 14’ BLD, 6112 HRS....................................................................................................$94,000 2001 VOLVO G730, STK# X299626, CAB/AC, 14R24, 14’ BLD, FRT SCAR, FRT HTCH, WING, 11,156 HRS ..........................................................$70,000 2009 JOHN DEERE 772G, STK# X327645, CAB/AC, 14’ BLD, FRT SCAR, 2470 HRS ........................................................................................$250,000

SKID STEERS 2003 JOHN DEERE 240, STK# X325199, 66’’ BUCKET, BACKUP ALARM 10X16.5, 3000 HRS ..........................................................................$15,900 2005 JOHN DEERE 332, STK# X247418, 2SPD, 14X17.5BB, FOOT, 84’BK, BLCK HT, 2297 HRS ..........................................................................$23,500 2006 JOHN DEERE CT322, STK# X318542, CAB/AC, 12” RBR TRK, FT CNTRLS, 2 SPD, 72” BKT, 1852 HRS ................................................$23,500 2009 NEW HOLLAND C185, STK# X320377, CAB/AC, HND CNTRLS, 2 SPD, BKT, 842 HRS ....................................................................................$45,900 2004 BOBCAT S185, STK# X311675, ROPS, HND CNTRLS, HI FLO, 3583 HRS....................................................................................................$15,300 1997 ASV MD70, STK# X321395, CAB/HT, HAND CNTRLS, 1785 HRS ........ ..........................................................................................................$10,600 2006 JOHN DEERE CT332, STK# X319202, CAB/AC, AUX HYD, GP BKT, 3638 HRS ..........................................................................................$24,935 2007 JOHN DEERE CT332, STK# X314098, CAB/AC, 18” TRK, FT CNTRLS, 2 SPD, 1038 HRS ..............................................................................$32,000 2006 JOHN DEERE CT332, STK# X218101, CAB/AC, 18 RBR TRK, 2SP, AUX, HYD QC, 1732 HRS ..................................................................$30,000 2007 JOHN DEERE 325, STK# X251518, CAB/AC, 2 SPD, 2989 HRS ............ ..........................................................................................................$25,815

Online Auctions at: www.RDOAuctions.com

www.rdousedequipment.com 61 Locations in 9 States - HQ in Fargo, ND

Bob Schmidt • 972-554-2139

Sam Leeper • 619-873-1406

bschmidt@rdoequipment.com (TX)

sleeper@rdoequipment.com (AZ/CA)

Jeff Hawks • 952-882-2712

Paul Sears • 951-778-3704

jhawks@rdoequipment.com (MN/MT/ND/SD)

psears@rdoequipment.com (Int’l)

RDOUsed_Constr

Page 32 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Geith Proven, Durable & Trusted for Generations.

3 year warranty on couplers ordered from 15th August to 15th December 2011 See geith.com for Terms and Conditions

T: 866-472-4373 (Toll Free) T: 704-883-3500 F: 866-472-4950 www.geith.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 33

Page 34 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FlangeLock Contamination Control Tool Receives Patent FlangeLock LLC, founded and based in Greenwich, ing them on the equipment. Conn., received a patent from the U.S. Patent Office within As well, “hoses get cleaned and the past two months for its contamination control tool, the capped when you buy them,” Pearl said, FlangeLock. “but there’s nothing to keep the caps on. The FlangeLock tool is an easy-to-use cap that slides onto A customer buys some hoses, tosses the fitting and is sealed with one turn of the bottom plug, them into the back of a truck, the caps keeping oil in and contaminants out. come off and those new hoses are It is produced in sizes for 8, 10, 12, 16, 20, 24 and 32 in already contaminated. The contaminants codes 61, 62 and KAT-style hydraulic flanges. get into the machine, and there’s a probThe FlangeLock is manufactured in Connecticut with lem. We have the solution.” lightweight anondized aluminum. The FlangeLock is colorSince the FlangeLock’s inception in coded for easy-to-identify sizes. 2009, the company’s dealership network “The FlangeLock represents major savings in a number of has substantially grown. Initially the areas,” Mike Pearl, part owner of FlangeLock LLC, said. “It product was distributed only through will save time because there won’t be any oil leaking and www.flangelock.com and HO Penn, having to be cleaned up. It will save money because again, with no leaks, no oil is wasted. And a really big savings will be with EPA cleanups. The EPA is looking at a lot of equipment right now and a lot of companies are being temporarily shut down in order to get things cleaned up. The FlangeLock will cut way down on that lost time and money.” Equipment owners seeking to stop oil leaks are not the only ones who benefit from the FlangeLock. Pearl foresees the factories where the equipment is manufactured being able to use the FlangeLock during the assembly process to keep contaminants from enter- The FlangeLock is manufactured in Connecticut ing the lines and, if a customer desires, sell- aluminum.

headquartered in Poughkeepsie, N.Y. Today, the FlangeLock can be found across the United States and Canada through such dealers as Cleveland Brothers, based in Harrisburg, Pa.; Edward Ehrbar Inc., Yonkers, N.Y.; SunSource, with many branches throughout the United States; Genesis Attachments; Jewell Attachments; Finning CAT of The FlangeLock tool is an easy-to-use Canada; HosePower USA, with cap that slides onto the fitting and is branches across the United sealed with one turn of the bottom plug, States; Dakota Fluid Power, with keeping oil in and contaminants out. branches in the Dakotas and Nebraska; Progressive Hydraulics, with branches in New Jersey and New York State; and many more. And with the FlangeLock’s ever-growing distributorship, Pearl said he’s hoping to approach selling 10,000 pieces sold by the end of 2011, as well as continuing to expand with additional distributorships. For more information call Mike Pearl at 914/980-8890, or visit flangelock.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) with lightweight anondized

CEG

Friendly Competition Abounds as Bale Equipment Hosts Triple Threat Rodeo RODEO from page 22

Al Fox (L) of Fox Excavating, Clarendon, Pa., gets last minute instructions on operating this Case 221E Series 3 wheel loader from Case Equipment Company’s Rob Marringa.

Tait Davenport (L) of Murtco Inc. gets news of his time on this Case 580 Super N backhoe from Case Construction’s Paul Wade.

(L-R): Bale Equipment’s Glen Gish, Case Equipment’s Brent Battaglia, and Bale Equipment’s CEO, Bill Abel Jr. welcome contestants to the Rodeo.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 35

800-333-5993 Bill Misgrave Ext. 2210 bmusgrave@altorfer.com Corporate Office Cedar Rapids, IA.

Locations in Iowa, Illinois & Missouri BUY • SELL • CONSIGN • RENT

2005 CAT 963C, S/N BBD02054, 4716 Hrs ....$76,000

2006 CAT D6R LGP, S/N WRG00185, 5302 hrs $182,000

Complete inventory & photos at:

www.altorfer.com 2006 CAT 613C II, S/N 8LJ02973, 1933 Hrs $126,500

2008 CAT 297C, S/N GCP00574, 2167 Hrs ....$40,000

2000 CAT 966G, S/N 3SW00855, 9627 Hrs $121,000

1990 CAT 235C MH, S/N 3WG00230 ............$45,000

2005 CAT 330CL LR, S/N DKY04185, 3,073 Hrs $220,000

2006 CAT 232B, S/N SCH01798, 684 Hrs ......$19,900

2007 CP-563E, S/N CNT01572, 1209 hrs ....$116,700

Expanding Coverage...

Alban Tractor, Ziegler CAT Appointed as NorAm Dealers Alban CAT based in Baltimore Md., now represents the NorAm 65E compact motorgrader from its 11 locations in the midAtlantic region. The 84 year old family owned Caterpillar dealer will sell, rent and support the 65E at each branch location including its extensive network of CAT Rental Stores: Alban Rents. Ziegler CAT based in Minneapolis, Minn., will provide coverage for its market from its 13 locations in Minnesota and seven in Iowa. Ziegler will provide sales, service and parts from all locations including Ziegler Rental operations. The 97 year old dealership has represented the Caterpillar product line sine 1914. The NorAm 65E follows a 60 year heritage of compact graders originating with the Allis Chalmers model “D” in 1949. The machine continued to be an industry leader

1977 CAT 120G, S/N 87V02662, 7670 Hrs ..$37,500

as the Fiat-Allis model 65B from the 1970s through the 1990s. NorAm Construction Equipment began marketing the machine in 1993 and has continually strived to update the unit to current technical and performance standards while maintaining the traditional features that have made the machine a staple in the industry, according to the manufacturer. “We are very pleased to have Alban Tractor and Ziegler CAT join our team,” said Dave Watson, vice president of NorAm. “Both companies feature extensive histories and are very highly respected in their marketplaces. Our machine complements their product lines and provides their sales professionals with additional creative and cost effective solutions for customers in their areas of trade.” For more information, visit noram65.com.

Powerful. Reliable. Kubota. Clean Running Diesel Engines from 5.6 to 99 HP for OEM, Irrigation, Replacement and Industrial Power Applications

Your complete source of engine and generator power

314-868-8620 U www.ckpower.com

In St. Louis, ask for John Costello U In Illinois, ask for Dan Fichter In Missouri & Kansas, ask for Bob Balsat

Page 36 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Murphy Tractor & Equipment Co.’s Ulysses, Kan., branch played host to the luncheon event.

The John Deere 624K wheel loader was a big attraction at the customer event. Customers could check out its new features, including upfront, and enhanced multifunction monitor displays operation, diagnostic and maintenance information on a color LCD screen, and a quieter cab that has more legroom and improved ergonomics.

Murphy Tractor & Equipment Hosts Customer Luncheon

A customer sits in the cab of the John Deere 624K to get a feel for what it’s like behind the wheel loader’s controls.

urphy Tractor & Equipment Co. Inc. invited customers to a luncheon Oct. 14 at its branch in Ulysses, Kan. More than 100 individuals attended the gathering, where they enjoyed lunch, learned about John Deere equipment, and had a chance to interact with Murphy Tractor personnel. During the event, a variety of John Deere equipment pieces were on display for customers, including the John Deere 624K wheel loader, the 330D and 332D skid steers and 872GP motorgrader. Murphy Tractor and Equipment Company Inc., one of John Deere’s largest North American construction equipment dealer organizations, is headquartered in Wichita, Kan. The organization has 26 locations throughout the states of Iowa, Kansas, Missouri, Ohio, Pennsylvania and Nebraska. For more information, visit www.murphytractor.com.

In addition to checking out the John Deere equipment, customers enjoy a lunch buffet.

Ulysses Service Technician Zach Rupp (R) points out the many features of the John Deere 772GP motorgrader to a luncheon attendee.

Rich Fawson (standing), Murphy Tractor & Equipment general manager — service, and Ulysses branch technicians review certified service training.

Pages 37-45

Snow and Ice Section Arctic Snow & Ice, Patten Industries Welcome Snowfest

rctic Snow & Ice Control Products and Patten Industries Inc. hosted Snowfest 2011 at Arctic Snow & Ice Control’s facility in Frankfort, Ill., on Oct. 14. Attendees got a chance to experience first-hand the combination of Arctic snowplows and Cat machines as a system for snow removal. In addition to the equipment demonstrations, there were door prizes every hour and an equipment rodeo. Other sponsors for the event included Arlington Power, Central Salt, Chambana Sales, and Rigg’s Outdoor Power Equipment.

(L-R): Brandon Frigo of Arctic Snow & Ice Control and Tom Rigg and Paul Richey of Rigg’s Outdoor Equipment check out this Cat 252B equipped with an Arctic 8 ft. light-duty sectional plow.

Chad Mennenga of Superior Landscaping looks at the Arctic 8 ft. sectional plow.

Dave Welden (L) of K&D Enterprise listens to Patten Industries Sales Representative Russ Woelke explain the features of the Arctic Snow & Ice Control sectional snowplows.

(L-R): Randy Strait, owner of Arctic Snow & Ice Control, shows the Arctic plow lineup to Nation One Landscaping Co. President Brian Emmick and Lance Moline, also of Nation One Landscaping Co.

(L-R): Patten Industries Sales Manager Mike Jaworski welcomes Kurt Kelderhouse of Zenere Companies and Greg Zenere, Zenere Companies president, to Snowfest 2011. Patten industries was a major sponsor of Arctic Snow & Ice Control’s Snowfest 2011.

John Salek (L) of Patten Industries speaks with John Starek, director of operations of Arctic Snow & Ice Control, at the Snowfest 2011 in Frankfort, Ill.

Demonstrating the 8 ft. light-duty sectional plow is Brandon Frigo of Arctic Snow & Ice Control.

Steve Sepaniak, (L) director of sales Arctic Snow & Ice Control, and Arctic Snow & Ice Control Operations Manager Jeff Sexton (R) show the wide range of plows they have to offer to Ray Guzak, president of R. Guzak Contracting.

Page 38 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Boss Snowplow Champions Project Gives Free Snow Removal Services Following a successful launch last year, The Boss snowplow is underwriting a second year of Project EverGreen’s SnowCare for Troops program and urging snow removal professionals to join the movement and double the volunteer base in year two. SnowCare for Troops provides free snow removal services for military families with a spouse or family member serving in the armed forces through a dedicated volunteer network. “The response to SnowCare for Troops from caring professionals and military families has been tremendous and we are challenging our supporters to double the participation for the 2011-12 snow season,” said Mark Klossner, marketing manager of The Boss snowplow. “We want to thank everyone who gave countless hours in heavy snow, sleet and ice to back up our country’s selfless military families this past winter. As the brand that backs up snow removal professionals, we’re asking for their help to spread the word and expand participation this year. We know they’ll get back tenfold what they put into it.” Snow removal professionals and other volunteers have many ways to support the SnowCare for Troops program, including: • Offering free snow removal services throughout the winter to one or two families in their service area; • Loaning snow removal equipment to volunteers or groups; • Donating money, transportation or gas cards to offset snow removal and maintenance costs; and • Referring friends and/or military families they may know to sign up for the program. The Boss underwrites the SnowCare for Troops program. It’s open to anyone with a plow or other snow removal equipment who wants to lend a hand. Through its active backing and participation, Boss provides funding support

and helps build awareness for SnowCare for Troops to encourage grassroots involvement. “SnowCare for Troops got off to a roaring start, and we want to thank Boss snowplow for backing up military families once again through its integral support,” said Project EverGreen Executive Director Cindy Code. “When a loved one is serving overseas in the armed forces, having the added burden of snow removal lifted from the shoulders of the one left behind is a priceless gift.” Project EverGreen’s SnowCare for Troops and its sister program GreenCare for Troops are serving thousands of military families through a coast-to-coast network of lawn care, landscape and snow care professionals and volunteers dedicating thousands of service hours to military families. Project EverGreen has 12,000 military families in its database, more than 3,500 green industry participants and nearly 1,000 snow care professionals and volunteers. For more information, visit www.projectevergreen.com/scft or www.bossplow.com/snowcarefortroops.

Kioti Snowblowers Enhance Tractor Attachment Line Kioti Tractor has expanded its implement and attachment lines to include three front mount snowblower models. The new implements are designed to fit Kioti’s entire CK line of compact tractors ranging from 20 to 35 hp (15 to 26 kW), as well as its DKSE models in the 40 to 50 hp (30 to 37 kW) range. All of the new front mount snowblowers are powered off the tractor’s mid-mount PTO and are secured to a special sub-frame that includes a quick attachment system, giving the operator optimal flexibility and enhanced productivity. Adjustable lateral skid shoes are standard on the KS66220FM and KS72-220FM, while offered as an option on the smaller KS54-180FM model. These two-stage snow movers are available in three operating widths — 54, 66 and 72 in. (137, 167 and 183 cm) — to suit a combination of applications and to fit a wide-range of tractors. The new implements are designed to fit Kioti’s entire CK line of compact tractors ranging from 20 to 35 Center-balanced 14 or 15 in. hp (15 to 26 kW), as well as its DKSE models in the 40 to 50 hp (30 to 37 kW) range.

(35.5 or 38 cm) diameter augers move snow quickly and effortlessly to a centerpoint discharge window, where a high-speed, four-blade fan moves it directly to the discharge chute. Reversible/replaceable carbon steel cutting edges are standard on the larger models. The discharge chute itself is hydraulically driven. This smooth-operating chute rotates up to 282 degrees, giving the operator a wide range of discharge options. The chute rotates on a high modulus polyethylene bushing that provides smooth, long-lasting operation. The chute discharge deflection angle may be manually adjusted. This is a standard feature on all three models. Both hydraulic and electric deflectors, controlled at the operator station, are available as options. The latter is powered by the DC electrical system of the tractor. For more information, call 877/465-4684 or visit www.KIOTI.com.

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 39

$ SORZ WKDW VFUDSHV WKH ORW FOHDU RQ WKH ÀUVW SDVV ³ QRZ WKDW·V 5($/ YDOXH $UFWLF·V 6HFWLRQDO 6QR 3ORZ 1R QHHG IRU PXOWLSOH SDVVHV RU UH SORZLQJ 1R H[FHVV VDOWLQJ ,W·V D QR EUDLQHU 1HHG SURRI" ,W·V LQ WKH SORZ

LQFK LQGLYLGXDO PROGERDUG VHFWLRQV PRYH XS DQG GRZQ LQGHSHQGHQWO\ WR FRQWRXU SHUIHFWO\ WR WKH SDYHPHQW HQVXULQJ QR VQRZ LV OHIW EHKLQG 6WHHO FXWWLQJ HGJHV VFUDSH FRPSDFWHG VQRZ DQG LFH FOHDU ² OHDYLQJ QRWKLQJ EXW D FOHDQ ORW 3DWHQWHG 6OLS +LWFK GHVLJQ DOORZV \RX WR GURS WKH SORZ DQG JR DXWRPDWLFDOO\ DGMXVWLQJ DQG FRQWLQXDOO\ UH DGMXVWLQJ WR WKH SDYHPHQW KHLJKW IRU RSWLPDO SORZLQJ SHUIRUPDQFH

&KHFN RXW WKH YLGHR WR VHH WKH IHDWXUHV LQ DFWLRQ DW VHFWLRQDOSORZ FRP :KLOH \RX·UH WKHUH UHDG FXVWRPHU WHVWLPRQLDOV RU GRZQORDG VSHFLÀFDWLRQV :H·UH VXUH \RX·OO DJUHH ZKHQ \RX·UH ORRNLQJ IRU UHDO YDOXH WKH FKRLFH LV FOHDU

6HH XV DW &21( ;32 &21 $** ERR WK + ,&( 612

Page 40 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

TRIPLE THREAT.

5’ V35 Power Vee Plow, narrows to 48” for sidewalks

12’/22’ SW48 Power Side Wing Plow

9'2"

• NOTHING’S TOUGHER, SMARTER OR FASTER than THE BOSS XT line of plows, including the NEW Poly Power-V XT. A rock-solid combination of professional-grade toughness, Power-V versatility and super-slick poly efficiency, the newest XT is unlike any plow in the industry. But that’s no surprise coming from THE BOSS. We’ve been driving the industry forward for 24 years with products that make your job faster and easier. Simple as 1-2-3.

9'0" T THE BOSS XT PLOWS: • NEW Poly Power-V XT… 8'2" 9'2" • Steel Power-V XT……… 8'2" 9'2" ™ • Super-Duty XT…………. 8'0" SmartLight 8'6" 9'0" • Taller blade and enhanced curl • 37" tall flared blade wings on Power-V models • High-performance cutting edge

Many Plow Models and Mounting Options Available 4’ thru 24’ 12’ V48 Power Vee Plow

• SmartHitch ® 2 • SmartLight ™ 2 • SmartTouch ® 2 • SmartShield ® 8’ - 14’ Box Plows Available with Trip Edges

(DEALER IMPRINT)

b o s s p l o w . c o m

Phone: (905) 332-8088 | Toll Free: (877) 321-2282

www.machinability.com QUALITY DOESN’T COST – IT PAYS! Municipal Trucks • Wheel Loaders • Backhoes • Tractors • Skid Steers • Sidewalk Equipment

•

CANNON TRUCK EQUIPMENT

Snow Problem...

51761 Danview Technology Court • Shelby Twp., MI 48315 • 586-991-0054 Fax:586-991- 0074 www.cannonequip.com

CRYSTEEL TRUCK EQUIPMENT 52248 Ember Rd. PO Box 733 Lake Crystal, MN 56055 800-722-0588 www.crysteeltruck.com

Parallel Lift Plow Is Latest Addition to Henke Lineup

• SmartLight ™

99% of Americans have seen combat on TV. 1% of Americans have seen combat in Iraq or Afghanistan.

TOPPERS PLUS 1929 E. Madison Ave. • Mankato, MN 56001 800-321-7587 www.toppersplus.com We know where you’re coming from. If you’re a veteran of Iraq or Afghanistan, you’re not alone. We’ve been there. Join us at CommunityofVeterans.org

Photo by Petty Officer 2nd Class Sandra M Palumbo U S Navy Bahrain November 6 2007

1130 73rd Ave. N.E. • Fridley, MN 55432 800-795-1280

The latest snow fighting product from Henke Manufacturing is its parallel lift plow. Designed to remain parallel to the ground in transport or in angling positions, this plow can be completely removed from the truck hydraulically, leaving only a flat plate. The truck hitch and power reversing and lifting mechanisms remain with the plow. The parallel lift plow has an inverted “J” shape 43 in. (109 cm) high moldboard with 10 vertical ribs. The moldboard is available in steel or polymer in 10, 11 and 12 ft. (3, 3.5 and 3.6 m) lengths. Henke Manufacturing has more than 90 years experience in the design and manufacture of snow fighting equipment utilized in both the public and private sectors. Its Leavenworth, Kan., headquarters currently employs more than 90 people with 70,000 sq. ft. of manufacturing. Henke is a member of the Alamo Group Inc., headquartered in Seguin, Texas. For more information call 888/682-9010.

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 41

Page 42 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Act fast, Pre-Season Specials on now! CALL 888-529-5524 TODAY!

Snowplows for all sizes of trucks and tractors

Visit our NEW website products page!

14311 Ewing Avenue, Burnsville, MN 55306 | info@StonebrookeEquipment.com | www.StonebrookeEquipment.com

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 43

www w.jcbvision.com

WHEN SNOW BRINGS THINGS TO A STANDSTILL, WE’LL GET YOU MOVING AGAIN

BEST IN

SAFETY

VISIBILITY

COMFORT

EFFICIENCY

SERVICEABILITY

Industry’s only side door entry

60% better than competition

33% larger cab

Up to $3,000 in annual fuel savings

24% better SAE s

Nobody rivals our vision JCB has alwayys been a visionary company, from the invention of the backhoe loader, to the only skid steer with a side door. Now, we’ve redesigned our skid steer from the ground up. We’ve given it greater visibility, increased accessibility and made it more comfortable – all without saccrificing safety. Step in our industry ’s only side door and you’ll learn why this is no ordinaryy skid steer. For more information visit www.jcbvision.com

become a fan at www.facebook.com/jcb or visit our blog: www.jcbdirt.com

LO C AT I O N S JCB of Chicago 1603 East Algonquin Rd Arlington Heights, IL 60005 847-437-8686 Fax: 847-437-8738

Diesel Machinery Inc. 4301 N. Cliff Ave. Sioux Falls, SD 57104 605-336-0411 Fax: 605-336-9503

16754 New Ave Lemont, IL 60439 630-257-1261 Fax: 630-257-0614

Rapid City, SD 57702 605-348-7438

1548 Huntwood Dr Cherry Valley, IL 61016 815-332-8222 Fax: 815-332-3056 www.casey-equipment.com

Aberdeen, SD 605-725-4364

JCB of Milwaukee 12011 W. Silver Spring Drive Milwaukee, WI 53225 262-783-7510

Sievers Equipment 406 Old Rt. 66 • Hamel, IL 62046 618-633-2622 8080 State Rt. 16 • Hillsboro, IL 62049 217-532-3222

JCB of Ohio 8155 Roll & Hold Parkway Macedonia, OH 44056 800-752-1220 www.jcbohio.com

State Rd. 267 South Greenfield, IL 62044 217-368-2486 14464 Shad Rd. • Carlinville, IL 62626 217-854-3191 1351 West Jackson St. • Auburn, IL 62615 217-438-6111

MH JCB 106 Circle Freeway Drive Cincinnati, OH 45246 (Ph) 513-681-2200 (Fax) 513-681-1235 3306 Gilmore Industrial Blvd. Louisville, KY 502-962-6560 Fax: 502-810-9306 5859 Raymond St. Indianapolis, IN 46241 317-240-6300 www.mhjcb.com

Page 44 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

SnowEx Releases New Pair of Ground-Drive Spreaders

The SP-725G and SP-1225G feature corrosion-resistant polyethylene hoppers and 12-in. (30.5 cm), adjustable stainless-steel spinners.

SnowEx has two new ground-drive spreaders for use on sidewalks, parking lots and other off-road applications. Equipped with lawn-and-garden style hitches, they are designed to tow behind compact tractors, ATVs and utility vehicles. The SP-725G and SP-1225G offer 7and 12-cu.-ft. (.2 and .3 cu m) capacities, respectively. They feature corrosionresistant polyethylene hoppers and 12-in. (30.5 cm), adjustable stainless-steel spinners. Due to its agitation system, the spreaders are capable of handling bagged rock salt and ice melters. They spread up to 30 ft. (9 m) wide at 5 mi. (8 kmh) per hour and are available with a deflector skirt kit for narrowing the spread width on sidewalks. The ground drive system is comprised of a heavy-duty transmission and large, narrow pneumatic tires for maximum traction on snow and ice. Other standard features include a 14-ft. (4.3 m) cable for controlling the manual gate and a clear, fitted hopper cover for weather protection. Both models are covered by a twoyear limited warranty. For more information, call 800/7258377 or visit www.trynexfactory.com.

Paladin’s FFC Snow Push Removes More Than Just Snow

Available in widths ranging from 6 to 16 ft. (1.8 to 4.8 m), the FFC snow push can move up to 21 cu. yds. (16 cu m) of snow at one time.

The FFC snow push by Paladin Construction Group attaches to skid steers, backhoes, compact wheel loaders and traditional wheel loaders to efficiently move large volumes of snow without leaving windrows. Available in widths ranging from 6 to 16 ft. (1.8 to 4.8 m), it can move up to 21 cu. yds. (16 cu m) of snow at one time. An optional pull-back kit cleanly draws back snow away from buildings, fences and confined areas, creating a more effective snow removal process. In addition to snow applications, the FFC snow push is ideal for waste water, manure, feed, lot and food cleanup, according to the manufacturer. The FFC snow push is available in 127 Series, 3600 Series and 4800 Series models. The FFC 127 Series snow push offers lighter weight models designed for skid steers and is ideal for snow removal in confined spaces. Available in widths ranging from 6 to 10 ft. (1.8 to 3 m), it can move up to 8 cu. yds. (6 cu m) at one time. The FFC 3600 Series snow push attaches to skid steers, backhoes and compact wheel loaders and is available in widths ranging from 8 to 14 ft. (1.8 to 4.3 m). It is able to easily move up to 13 cu. yds. (10 cu m) at one time. The FFC 4800 Series snow push has a width of 16 ft. and attaches to backhoes, compact wheel loaders and traditional wheel loaders. Ideal for larger applications, it has a push capacity of 21 cu. yds. For more information, call 800/456-7100 or visit www.paladinconstructiongroup.com.

Construction Equipment Guide â&#x20AC;˘ Snow & Ice Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 29, 2011 â&#x20AC;˘ Page 45

.* / / & 4 0 5 " 8& 4 5 & 3 / 1 0 8 % & " & 3 / & 5 80 3 , " T Q F O & R V J Q NF O U $ P NQ B O Z # M P P NJ O H U P O ./

D V T U P N U S V D L C P E Z F R V J Q NF O U S P D I F T U F S ./

; 5 S V D L & R V J Q NF O U 4 U 1 B V M ./

1 P E T U J S F XI F F M XI J U F C F B S M B L F ./

T O P X 1 M P XT 1 M V T # V G G B M P ./

" # $ 3 F O U B M T

' S J F O E M Z $ I F W S P M F U

1 B S L $ I S Z T M F S + F F Q

S V M F U J S F

T S W F O U F S Q S J T F T

4 P V U I 4 U 1 B V M ./

' S J E M F Z ./

C V S O T W J M M F ./

XJ M M NB S ./

I B T U J O H T ./

D F O U S B M I Z E S B V M J D T T U D M P V E I V U D I J O T P O S P H F S T

B S S Z F M XP P E D P O T U S V D U J P O .B T P O $ J U Z * "

Q F S S Z ĹŚ T U S V D L S F Q B J S M P O H M B L F ./

4 NJ U I 8J O U F S 1 S P E V D U T .B Q M F ( S P W F ./

5 P Q Q F S T 1 M V T NB O L B U P ./

4 J S F L ) Z E S B V M J D T

' S F E T 5 J S F

4 J C M F Z & O H J O F F S J O H

' B S J C B V M U NO

4 U J M M XB U F S G P S F T U M B L F

$ B O O P O ' B M M T ./

5 0 ' * / % " % & " & 3 / & " 3 : 0 6 7 * 4 * 5

XXX XF T U F S O E F B M F S T D P N

0 3 $ " 6 4 " 5

Q M P XT

Page 46 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CASE AUTHORIZED DEALERS

KENTUCKY

ILLINOIS Birkey’s Construction Equipment Bloomington Galesburg Mattoon Urbana

(309) 827-0520 (309) 341-4360 (217) 235-3158 (217) 337-1781

Burris Equipment Waukegan Ingleside

(847) 336-1205 (815) 363-4100

Bale Equipment Louisville Radcliff

(502) 589-9901 (270) 352-5970

Diamond Equipment Bowling Green

(270) 781-1061

McKeel Equipment Company Murray Paducah

(270) 753-3062 (270) 444-0110

Diamond Equipment

Southeastern Equipment

Mt. Vernon

Burlington

(618) 242-2273

H. Edwards Equipment

State Equipment

Belleville

Ashland

(618) 233-2184

Luby Equipment Services Quincy Springfield

(859) 586-6133 (606) 928-5644

Wilson Equipment

(217) 222-5454 (217) 744-2233

Corbin Lexington Prestonsburg

(630) 627-0000 (630) 739-7770 (815) 385-0420

Wright Implement

(606) 528-0700 (859) 254-6443 (606) 874-8037

McCann Industries Addison Bolingbrook McHenry

Miller-Bradford & Risberg Rockford

(815) 397-6200

Liberty

MICHIGAN Bridgeport Equipment Co. Bridgeport

(989) 777-1900

INDIANA

Miller-Bradford & Risberg

Diamond Equipment

Negaunee

Evansville Terre Haute

Northern Michigan Equipment

(812) 425-4428 (812) 299-4747

Hopf Equipment Huntingburg

(812) 683-2763

MacDonald Machinery Co. Fort Wayne Indianapolis Lafayette South Bend Schererville

KANSAS

Traverse City

(906) 475-4181 (231) 943-3700

Southeastern Equipment Holt Novi

(260) 747-1561 (317) 856-3000 (765) 742-2080 (574) 271-0800

MINNESOTA

(219) 865-6545

Crookston Hermantown Marshall Rogers

McCann Industries

For For commercial commercial use use only. only. CCustomer ustomer pparticipation ar ticipation ssubject ubject ttoo ccredit redit qqualification ualification aand nd aapproval pproval bbyy CCNH N H CCapital apital America A merica LLC. L LC. See See your your Case C ase Dealer Dealer for for details details and and eligibility eligibilit y rrequirements. e quir eme n t s . D Down own ppayment ay m e n t m may ay bbee rrequired. e quir e d . O Offer f fer ggood ood tthrough hr o ugh D December ecember 30, 3 0, 2011 2011 at at participating p a r t i cip a t in g dealers. dealers. Not Not all all customers customers or or applicants a p p li c a n t s m may ay qqualify. ualif y. Taxes, TTaa xes, ffreight, reight, sset-up, et-up, ddelivery, eliver y, aadditional dditional ooptions ptions oorr aattachments t tachments not not included included in in payment payment example example above. above. Offer O f fer ssubject ubject ttoo cchange hange oorr ccancellation a n c e ll a t i o n w without ithout nnotice. o t i c e. ©2011 ©2011 CNH C N H America A merica LLC. L LC. All A ll rrights ights rreserved. eser ved. CCase ase iiss a rregistered egistered ttrademark rademark ooff CCNH N H AAmerica merica LLLC. LC. w www.casece.com w w.casece.com

(606) 787-8331

(517) 694-0471 (248) 349-9922

Titan Machinery (218) 281-4668 (218) 727-3038 (507) 532-5783 (763) 428-5099

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 47

SOUTH DAKOTA

IOWA Greiner Implement Company, Inc. Ottumwa

(641) 683-1691

Titan Machinery Center Point Clear Lake Davenport Des Moines Sioux City

(319) 849-3889 (641) 357-2511 (563) 386-0400 (515) 974-5100 (712) 239-4941

Crown Power and Equipment (573) 443-4541 (573) 392-0230 (573) 636-5281

Luby Equipment Services Cape Girardeau Fenton

(573) 334-9937 (636) 343-9970

Nelson Tractor & Equipment Poplar Bluff

(573) 785-9628

Potter Equipment Company Springfield

(417) 862-9275

Rex Spencer Equipment Belton

(816) 331-6078

Victor L. Phillips Company Joplin Kansas City

Aberdeen Pierre Rapid City Sioux Falls

(605) 225-0505 (605) 224-9247 (605) 388-0266 (605) 336-3434

OHIO Eckert Brothers Sugarcreek

(330) 852-2611

Meyer Equipment

MISSOURI Columbia Eldon Jefferson City

Titan Machinery

(417) 781-8222 (816) 241-9290

Ridgeville Corners

(419) 267-3848

Southeastern Equipment Brilliant Brunswick Cambridge Dublin Gallipolis Heath Mansfield Marietta Mentor Monroe North Canton Perrysburg

(740) 598-3400 (330) 225-6511 (740) 432-6303 (614) 889-1073 (740) 446-3910 (740) 522-3500 (419) 529-4848 (740) 374-7479 (440) 255-6300 (513) 539-9214 (330) 494-3950 (419) 874-0331

Twin Valley Equipment Eaton

(937) 456-6281

WISCONSIN Miller-Bradford & Risberg

NEBRASKA Titan Machinery Lincoln North Platte Omaha

(402) 464-3711 (308) 532-6571 (402) 733-3700

NORTH DAKOTA Titan Machinery Bismarck Dickinson Fargo Grand Forks Minot Williston

(701) 250-7925 (701) 227-5309 (701) 237-3333 (701) 775-8111 (701) 852-3188 (7001) 577-0024

Abbotsford Eau Claire Madison Sussex

(715) 223-2381 (715) 832-3443 (608) 222-9191 (262) 246-5700

Service Motor Company Dale Fond du lac New Franken Seymour

(920) 779-4311 (920) 923-1768 (920) 468-7700 (920) 833-2378

Titan Machinery La Crosse

(608) 788-1025

Triebold Implement Whitewater

(262) 473-2090

JLG Announces New Global Vice President of Marketing JLG Industries Inc., an Oshkosh Corporation company and a manufacturer of aerial work platforms and telescopic material handlers, announced Brad Nelson has joined the executive team as global vice president of marketing. With more than two decades of experience in marketing, product strategy and business management, Nelson most recently served as vice president of global marketing and communications for Eaton Corporation, a global power management leader. Nelson brings to his new position extensive knowledge of marketing strategy, global market development, branding, commercial marketing, segmentation, product marketing and promotion. All global marketing and product management team members will report to Nelson. Brad Nelson has joined the executive team “We are excited to welcome Brad to as global vice president of marketing. our executive team as his experience and leadership skills will prove invaluable as we continue to deploy marketing strategies Jones, Oshkosh Corporation executive vice around the globe that strengthen our position president and president of Access as the leader in aerial work platforms and tel- Equipment and JLG Industries Inc. For more information, visit www.jlg.com. escopic material handlers,” said Wilson

Construction Materials Prices Flatten as Activity Begins to Slow PRICES from page 1

since September 2010; copper and brass mills shapes, down 0.7 percent in September but up 14.8 percent over 12 months; steel mill products, which slipped 0.6 percent for the month but rose 13.5 percent for the year; and aluminum mill shapes, down 1.8 percent for the month but up 10.4 percent from a year earlier. “These prices can spike anytime there is a global supply disruption or a consensus that demand is strengthening worldwide, not just from U.S. construction,” Simonson explained. “In contrast, materials produced here and used only by U.S. construction have shown little price movement.” He cited, as examples, the producer price indexes for concrete products, up 0.2 percent in September and 0.3 percent over 12 months; lumber and plywood, down 1.3 percent for the month and 0.4 percent for the year; and gypsum products such as wallboard, down 1.7 percent and 4.6 percent, respectively. Simonson observed that the price index for new construction — what contractors

charge for construction projects — rose 2.2 percent over 12 months for industrial buildings, 2.6 percent for offices, 2.8 percent for warehouses and 3.0 percent for schools. “In light of the much steeper materials cost increases, these gains are not enough to keep contractors solvent,” he warned. Association officials said that in addition to the cost squeeze, the construction industry was suffering from decreasing demand for public sector construction activity. They said that while state and local construction budgets will continue to contract for the foreseeable future, Washington could help offset some of the decline by enacting legislation to make needed, long-term, investments in highways, transit systems, clean water systems, airports and runways. “Given the stagnant construction bid prices, taxpayers stand to benefit if Washington acts quickly to enact new infrastructure investments,” said Stephen E. Sandherr. “Even if construction prices rebound in the near future, it is still a lot less expensive to maintain infrastructure while it is operating than to fix it once it breaks.”

Page 48 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CRUSHING EQUIPMENT, PARTS & SERVICE Terry Hennessey 800-845-9188 terry.hennessey@fabickcat.com

Fenton, Missouri 800-845-9188 www.fabickcat.com

Go to www.fabickcat.com for a complete listing and description of our new and used equipment.

Portable Screen Telsmith offers an array of inclined and horizontal portable screening plants that have been designed to meet the variety of challenges encountered in different applications. Whether you need the ruggedness required when scalping large stone, to the finesse necessary for finish sizing, Telsmith has an efficient portable solution to meet your site needs.

Model TJ3258 - Jaw Crusher Designed around the Telsmith 3258 hydraulic jaw crusher, the TJ3258 is specifically designed to deliver high production while processing hard, abrasive stone. With a large crusher gape and width, the 3258 processes larger feed and has greater crushing capacity than competitive models. The 3258 jaw also incorporates unique hydraulic features proven to reduce maintenance and downtime to an absolute minimum: • Hydraulic Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Chamber Clearing: safely clears the crusher in minutes for increased uptime.

Model TI6060 - Impact Crusher Featuring the heavy duty Telsmith PA6060 Primary Impact Crusher, this plant is engineered for maximum productivity while processing less abrasive quarried stone or concrete recycle. Capable of receiving 40” stone or 58" wide concrete slabs, the PA6060 has proven to be a dependable, low cost producer. Advanced hydraulic features built into the PA6060 reduce maintenance and downtime providing increased production: • Hydraulic Apron Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Tilt Feed Plate: safely clears bridging in minutes for greater uptime.

DID YOU KNOW? For over a hundred years, Telsmith has designed and manufactured in the United States of America.

Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures and services a range of jaw, cone and impact crushers as well as single-deck to quad-deck screens.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 49

LIKE NEW LOADERS AT LESS THAN HALF THE PRICE!!! $78,000 JD 644E tool carrier tractors, Complete factory remanufacture in 2001, Marine Corps contract. Everything was gone through (engines, axles, transmissions, pivots, etc) at that time and the units have very low hours since the remanufacture process. Erb is putting on new paint, new air conditioning units, new 4 yd buckets. Units vary in hours and pricing. Pricing for a unit with less than 1900 hrs, with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber. $78,000

Bomag BW205, 84" Drum, #A5331 .............. ........................$42,000

Exodus MX447L Bomag BW180AD, 71" JD 950C, 24" Pads, Drum, #A4597 .............. 146" Blade, #N4092 ...... Material Handler, ......................$132,000 #A7204 ..........$485,000 ........................$48,000

JD 800CLC, 14' 5" Arm, JD 600CLC, 13' 5" Arm, 36" Pads, #N4385 ........ 36" Pads, #U10798 ...... ......................$475,000 ......................$185,000

JD 80C w/ Genesis JD 1050C, Waste 2006 JD 650J, 20” GVP7, #N4456 .............. Package, 165" Blade, Pads, 105” Blade, #N4579 ............$60,000 ......................$100,000 #N4010 ..........$225,000

NPK Hammers, All Sizes Rent or Purchase

ERB EQUIPMENT CO., INC. Sales, Rental, Parts & Services Of: John Deere, Liebherr, Bomag, NPK & Trail King

Call Industrial Sales At (636) 349-0200 Toll Free (866) 372-7368 Email: Mattheisel@erbequipment.com

VIEW COMPLETE INVENTORY (OVER 300 UNITS)

8 Locations To Serve You Fenton, MO Wentzville, MO

Mt. Vernon, IL Cape Girardeau, MO

Paducah, KY Cuba, MO

Owensboro, KY Evansville, IN

Page 50 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dealers From 15 Countries Enjoy Morbark’s Demo Days

(L-R): Mike Heiss of H&H Land Clearing, Morbark Regional Sales Manager Ed Dodak, Carmine Delliquadri of Delliquadri Landscaping, Bob Stewart of Columbus Equipment, Mark Delliquadri of Delliquadri Landscaping, and Tim Smith of Columbus Equipment Company catch up at the Demo Days event.

orbark held its customer Demo Days event Sept. 22 and 23 at its corporate worldwide headquarters in Winn, Mich. The event drew more than 300 customers and dealers from 15 countries eager to see the new machines Morbark

launched during the event. Among the new equipment on display, and in action, were the Advantage 3 high performance chipping drum, the Morbark 3800XL horizontal grinder and a sneak peek at several prototype machines yet to go into

Morbark’s 3800XL Wood Hog converts trees into mulch.

production. The event featured factory tours, educational seminars, equipment demonstrations and plenty of networking opportunities. The seminar covered a range of subjects including Tier IV engines, emerging markets and

Morbark’s “Orange Watchdog,” a custom designed communications system that monitors engine and machine operations and transmits real time production, fuel consumption and maintenance data to a user’s computer or telephone.

Demo Days attendees watch as a 4600XL Wood Hog goes to work.

A Morbark 1300 tub grinder powered by a Tier IV 1050 Cat engine show its muscle with a mix bag of wood waste.

Walt Deacon (L) and Randy Record of Deacon Equipment Company, Bloomsburg, Pa., are enjoying seeing all of the new equipment in action.

Page 52 • October 29, 2011 • www.constructionequipmentguide.com • Crawler Loaders, Dozers & Undercarriage Section • Construction Equipment Guide

CASE

JOHN DEERE Model

Engine Power hp (kw)

Weight lbs. (kg)

605C 655C-II 755K 450J 550J 650J 700J 750J 850K 850K WH

99 (74 130 (97) 190 (141.7) 77 (57) 85 (63) 99 (74) 115 (86) 155 (116) 187-205 (139.5-152) 205 (152)

950J 950J WH 1050J 1050J WH

247 (184) 247 (184) 335 (250) 335 (249)

23,600 (10,600 33,950 (15,400) 45,178 (20,492) 16,283 (7,386) 17,016 (7,717) 18,560 (8,419) 27,125 (12,307) 34,395 (15,599) 42,499-47,705 (19,295-21,684) 47,258-51,403 (21,436-23,316) 59,255 (26,877) 58,462 (26,518) 77,843 (35,309) 80,967 (36,726)

Model

Engine Type

Engine Power hp (kw)

550H LGP 550H LT 550H WT 650L LGP 650L LT 650L WT 750L LGP 750L LT 750L WT 850L LGP 850L LT 850L XLT 1150K LGP 1150K LT 1150K WT 1650L LGP 1650L WT 1650L XLT 1850K LGP 1850K LT Series 3 1850K XLT Series 3

J. Deere 4045T (4.5 L) Liebherr D 924 T-EA1 (6.7 L) J. Deere PowerTech PVX 6068 (6.8 L) J. Deere 4045H (4.5 L) J. Deere 4045H (4.5 L) J. Deere 4045H (4.5 L) J. Deere PowerTech 6068H (6.8 L) J. Deere PowerTech 6068H (6.8 L) J. Deere PowerTech PVX 6068 (6.8 L) J. Deere PowerTech PVX 6068 (6.8 L) Liebherr D936-L A6 (10.5 L) Liebherr D936-L A6 (10.5 L) Liebherr D936-L A6 (12.0 L) Liebherr D936-L A6 (12.0 L)

67 (50) 67 (50) 67 (50) 74 (55) 74 (55) 74 (55) 84 (63) 84 (63) 84 (63) 96 (72) 96 (72) 96 (72) 118 (88) 118 (88) 118 (88) 144 (107) 144 (107) 144 (107) 199 (148) 184 (137) 184 (137)

Weight lbs. (kg) 14,960 (6,786) 14,317 (6,494) 14,600 (6,622) 17,550 (7,959) 16,250 (7,371) 16,800 (7,619) 20,200 (9,157) 18,900 (8,569) 19,700 (8,955) 20,700 (9,402) 20,200 (9,181) 19,600 (8,900) 29,365 (13,317) 27,858 (12,636) 28,667 (13,003) 37,578 (17,042) 36,691 (16,640) 35,203 (15, 965) 49,450 (22,430) 44,269 (20,080) 46,649 (21,159)

CATERPILL KOMATSU Model

Engine Power hp (kw)

Weight lbs. (kg)

40 (30) 8,688 (3,940) 40 (30) EO -8 1A D2 9,350 (4,240) 78 (58) ) D21P-8EO 18,056 (8,190 78 (58) 22 XD31E ,827 (8,540) 18 89 (66) D31PX-22 ,298 (8,300) 18 89 (66) ) D37EX-22 19,070 (8,650 5 (79) 10 22 XD37P ,834 (9,450) 20 5 (79) 10 ) D39EX-22 21,804 (9,890 0 (97) 13 22 D39PX0) 28,043 (12,72 0 (97) 13 22 X1E D5 ,145 (13,220) 29 (125) 8 16 D51PX-22 0) 37,237 (16,89 (125) 8 16 15 D61EX,735 (18,930) 41 205 (153) D61PX-15 ,355 (20,120) 44 205 (153) D65EX-16 0) 45,945 (20,84 205 (153) 17 XD65W ,335 (21,470) 47 264 (197) D65PX-17 ,950 (28,100) 61 264 (197) D85EX-15 0) 60,960 (27,65 264 (197) 15 XD85P 45 (28,234) ,2 62 354 (264) D85EX-15 SL 0) 87,100 (39,50 354 (264) -6 D155AX 0) 87,100 (39,50 449 (335) -7 AX 55 D1 3,600 (51,530) 11 449 (335) 6) D275AX-5 116,528 (52,85 610 (455) SL -5 D275AX 7,940 (71,640) 15 890 (664) ) D375A-6 8,960 (108,390 23 890 (664) 0 D475A-5E 00) 249,560 (113,2 0 5E DAS D475

Engine Type LE-2 Komatsu 4D94 LE-2 94 4D Komatsu E-5 5L D9 A4 SA Komatsu E-5 5L D9 Komatsu SAA4 E-5 5L D9 A4 Komatsu SA E-5 5L D9 A4 SA su Komat E-1 07 D1 Komatsu SAA4 E-1 07 D1 A4 SA Komatsu 07 D1 E-1 Komatsu SAA6 D107E-1 Komatsu SAA6 D107E-1 A6 SA Komatsu D107E-1 Komatsu SAA6 D114E-5 A6 Komatsu SA D114E-5 A6 SA Komatsu D114E-5 Komatsu SAA6 D125E-5 A6 Komatsu SA D125E-5 A6 SA su Komat D125E-5 Komatsu SAA6 D140E-5 A6 SA Komatsu D140E-6 A6 SA su Komat D140E-5 Komatsu SAA6 D140E-5 A6 SA Komatsu D170E-5 Komatsu SAA6 140E-3 2V Komatsu SDA1 140E-3 2V A1 SD Komatsu

Model

Engine Power hp (kw)

rs: Crawle r tra cto D3K XL D3K LGP D4K XL D4K LGP D5K XL D5K LGP D6K XL D6K LGP D6N XL D6N LGP D6T XL D6T XW D6T LGP D7E D7E LGP D8T D8T LGP D9T D10T D11T D11T CD : Track loa de rs 3 s rie Se 9B 25 279C 289C 299C 953D 963D 973D

74 (55.2) 74 (55.2) 84 (62.6) 84 (62.6) 96 (71.6) 96 (71.6) 125 (93.2) 125 (93.2) 150 (111.8) 150 (111.8) 205 (153) 205 (153) 205 (153) 235 (175) 235 (175) 310 (231) 310 (231) 410 (306) 580 (433) 850 (634) 850 (634) 71 (53) 82 (61) 82 (61) 90 (67) 148 (110) 189 (141) 263 (196)

FOR NTGUIDE.COM E M IP U Q E N IO T NSTRUC GS. VISIT WWW.CO LOADER LISTIN R LE W A R C E T COMPLE

Weight lbs. (kg) ) 17,185 (7,795 ) 17,842 (8,093 ) 17,961 (8,147 ) 18,742 (8,501 ) 20,741 (9,408 ) 83 ,6 (9 47 ,3 21 6) 88 2, (1 09 28,4 7) 29,690 (13,46 5) 36,607 (16,60 1) 38,222 (17,79 8) 44,420 (20,14 0) 45,723 (20,74 3) 78 1, (2 24 ,0 48 5) 57,441 (26,65 5) 62,886 (28,52 8) 84,850 (38,48 1) 85,850 (38,94 0) 105,600 (47,90 1) 146,500 (66,4500) 230,100 (104,6 00) 248,600 (113,0 8,934 (4,052) 9,892 (4,487) ) 10,365 (4,702 ) 67 ,8 (4 30 ,7 10 7) 51 5, (1 09 34,2 0) 45,577 (20,22 8) 61,857 (28,05

Engine Type Case 4-390 or 4T-390 Case 4-390 or 4T-390 Case 4-390 or 4T-390 Case 445TA/EHA Case 445TA/EHA Tier 3 Case 445TA/EHA Tier 3 Case 445TA/E66 Case 445TA/E66 Tier 3 Case 445TA/E66 Tier 3 Case 667TA/E66 Case 667TA/E66 Tier 3 Case 667TA/E66 Tier 3 Case 667TA/EDJ Case 667TA/EDJ Case 667TA/EDJ Case 667TA/EDJ Tier 3 Case 667TA/EDJ Tier 3 Case 667TA/EDJ Tier 3 Case 667TA/EBF Tier 3 Case 667TA/EED Tier 3 Case 667TA/EED Tier 3

Engine Type T Cat C4.4 ACER T Cat C4.4 ACER T Cat C4.4 ACER T Cat C4.4 ACER T Cat C4.4 ACER T Cat C4.4 ACER T Cat C6.6 ACER T Cat C6.6 ACER T Cat C6.6 ACER T Cat C6.6 ACER T Cat C9.3 ACER T Cat C9.3 ACER T Cat C9.3 ACER T Cat C9.3 ACER T Cat C9.3 ACER T Cat C15 ACER T Cat C15 ACER T Cat C18 ACER T Cat C27 ACER T ER AC 2 C3 t Ca T ER AC 2 C3 t Ca Cat C3.4 DIT Cat C3.4 DIT Cat C3.4 DIT Cat C3.4 DIT T Cat C6.6 ACER T Cat C6.6 ACER T Cat C9 ACER

Construction Equipment Guide • Crawler Loaders, Dozers & Undercarriage Section • www.constructionequipmentguide.com • October 29, 2011 • Page 53

Faster cycles. Higher productivity Don’t be fooled by imitators. Thirty-plus years’ experience building the best hydrostatic dozers makes John Deere the brand for you. Innovations, like Total Machine Control (TMC), allow operators to customize machine response and operation to their personal preferences. J-Series Dozers deliver unsurpassed productivity and uptime, along with the lowest possible daily operating costs. And that’s just for starters. To learn all about John Deere J-Series Dozers, give us a call.

www.holtequipment.net Louisville, KY 40223 502/253-3721 1-800/507-9705 London, KY 606/862-8447 1-877/231-7151 Bowling Green, KY 42101 270/842-3400 1-866/528-9699 Richmond, KY 859/623-2030 1-800/463-8722

3600 North Grand River Ave Lansing, MI 48906 517/321-8000 Fax: 517/321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583

Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121

www.murphytractor.com

www.westsidetractorsales.com Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Rockdale, IL 60436 815/730-9011 765/447-6933 1-800/937-3355 Fax: 815/730-9036 Rockford, IL 60012 815/961-3160 Fax: 815/965-1810 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Indianapolis, IN 46219 317/544-3411

Wichita, KS 800/262-0139

Grand Island, NE 800/868-4017

Vandalia (Dayton), OH 800/233-4228

Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038

Dodge City, KS 800/794-0172

Lincoln, NE 800/416-5518

Lima, OH 800/423-7445

Great Bend, KS 800/264-4056

Omaha, NE 800/416-5095

Canton, OH 866/235-0438

Waterloo, IA 800/772-2019

Brunswick, OH 800/716-9796

Des Moines, IA 800/822-2212

Painesville, OH 866/800-1398

Fort Dodge, IA 800/362-2487

Poland (Youngstown), OH 866/503-7259

Sioux City, IA 800/352-4693

Cranberry Twp, PA 724/776-3636

Columbus, OH 800/222-2010

Delmont, PA 724/837-4500

Bloomington, IN 47403 812/333-9677 Fax: 812/333-9731 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324 Fort Wayne, IN 46825 260/482-8576 Fax: 260/483-4057

Topeka, KS 800/279-6087 Ulysses, KS 800/472-9238 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656 Gering, NE 800/205-6784 North Platte, NE 800/894-7060

Cincinnati, OH 800/844-3734

Page 54 • October 29, 2011 • www.constructionequipmentguide.com • Crawler Loaders, Dozers & Undercarriage Section • Construction Equipment Guide

Customers, Deere Engineers Team Up to Launch 755K Crawler Loader

Built from the ground up by customer collaboration with Deere engineers, the new 755K crawler loader features productivity enhancements and a new ITIV-certified diesel engine to help contractors to get more work done with less noise and fewer emissions, according to the manufacturer. Capitalizing on the loader design, track systems and comfortable cabs engineered for its dozers and K-Series loaders, the 755K is quiet, comfortable and easy to operate. Helping customers meet the latest local emissions regulations and bid specifications, it also has been updated with a John Deere ITIV-certified engine. Dozens of customers worked closely with Deere product development on the 755K. “Our customers spoke, and we listened,” said Dan Drescher, crawler product marketing manager of John Deere Construction & Forestry. “The 755K incorporates several enhancements that not only increase productivity, but respond to The 755K crawler loader has powertrain and track system individual operator preferences, such as the V-pat- technology designed for Deere’s new 850K crawler dozer. tern or joystick transmission control option. There’s also a rear ripper design to help turn mateUnited States. rials, a viscous-mounted cab for noise suppression and “General excavating and earthmoving contractors now increased serviceability to make daily maintenance easier.” have a North American-built crawler loader tailored to their Many of the contractors that collaborated with Deere on needs that can easily tackle a wide variety of regional terrain the 755K design also asked for a crawler loader built in the conditions,” Drescher said. The 755K crawler loader has powertrain and track system technology designed for Deere’s new 850K crawler dozer. Together with an ITIV-certified engine, the crawler loader Undercarriage Parts & Service reaches performance targets for hydraulic hp, lift capacity, drawbar pull and engine power boost. “With 190 hp, the 755K also has a higher maximum hinge pin clearance than the competition, more dump clearance www.sriparts.com art@sriparts.com and more static tipping load capacity,” said Drescher. “The bottom-line result is greater productivity.” The 755K also features a number of cab improvements to Quality increase operator comfort. The viscous cab mounting Undercarriage reduces noise from vibration while double-laminated rear window glass and complete interior sound-dampening treatComponents ment significantly reduce noise levels. Other cab conveniences include a sealed switch module All Makes & Models with keyless start, security mode with auto shutdown and a diagnostic monitor that’s both easy to read and provides Track Groups Chains Rollers machine condition information at a glance. Idlers Grousers Sprockets “Not only is the 755K easy to operate, it’s also easy to service,” Drescher said. “We find that the easier a unit is to service on a daily basis, the more likely it is that the service ASV Rubber Tracks will get done. That means more uptime, more productivity Tracks and more earning power for our customers.” Skid Steer Tires Loader Tires Among several easy maintenance features on the 755K is Deere’s NeverGrease pins in its loader bucket linkage, which Milling Machine & Chains eliminate time-consuming, messy greasing. Pads Service points also have been color-coded for easy identi Scraper Chains & Parts fication, fluid sampling valves are now standard, and under the iron, operators will find hinged belly pans and improved access. Deere’s Quad-Cool system also features a tilt-out grille and fan for simplified core cleanout, while separate hydrostatic and hydraulic reservoirs prevent the possibility of oil cross-contamination. For more information, visit www.JohnDeere.com.

SR Industries 732-766-2109

CONTRACTORS RENTAL CORP. A division of AIS www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586/727-7502 Fax: 586/727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 Toll Free: 800/457-8121

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

ROAD MACHINERY & SUPPLIES COMPANY www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax South Bend, IN 574/233-8770 574/233-8775 Fax

Construction Equipment Guide â&#x20AC;˘ Crawler Loaders, Dozers & Undercarriage Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 29, 2011 â&#x20AC;˘ Page 55

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 800/252-2926 Bolingbrook, IL 630/739-7474 800/826-9608 Carterville, IL 618/985-3399 800/274-7202 Marengo, IL 815/923-4966 800/765-2635 Portage, IN 219/764-8080 888/764-8226 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 800/274-7230 Cape Girardeau, MO 573/334-5252 800/274-7210 Columbia, MO 573/814-0083 800/274-7212 Palmyra, MO 573/769-2056 800/274-7214 DePere, WI 920/532-0526 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES

www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479 2300 Vermont Avenue Bismarck ND 58504 800/279-4437

XXX LPNBUTVBNFSJDB DPN

Page 56 • October 29, 2011 • www.constructionequipmentguide.com • Crawler Loaders, Dozers & Undercarriage Section • Construction Equipment Guide

Komatsu’s D155AX-7 Increases Productivity, Fuel Efficiency Komatsu America Corp.’s D155AX-7 crawler dozer is powered by an EPA Tier IV Interim and EU Stage 3B emission certified Komatsu engine. The powerful SAA6D140E engine is rated at 354 net hp (264 kW). The highly efficient automatic transmission is matched with the new engine to achieve productivity and maintains the same fuel economy as the model it replaces. Komatsu’s new crawler dozer has an operating weight of 87,100 lbs. (39,508 kg). In addition, the D155AX-7 builds on the Sigmadozer blade that was introduced in 2006, but now incorporates a new auto blade pitch function. The new dozer is equipped with the latest Komtrax technology, which sends machine operating information to a secure Web site utilizing wireless technology. Hour meter, location, cautions and maintenance alerts — to name a few of its features — are relayed to the web application for analysis. The Komtrax fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides a wealth of other information to drive business efficiency and productivity. Special features of the new crawler dozer include: • EPA Tier IV Interim and EU Stage 3B Emission Certified Engine Built upon Tier III technology, the SAA6D140E engine provides high horsepower while maintaining the same low fuel consumption as the D155AX-6. The Komatsu Tier IV Interim engine platform uses an advanced electronic control system to manage air flow rate, fuel injection, combustion parameters, and after treatment functions to optimize performance, reduce emissions, and provide advanced diagnostic capability. The D155AX-7 incorporates a much larger cooling package with dramatically improved airflow to keep the new Tier IV Interim engine running cool in harsh working conditions. Komatsu also has developed a hydraulically actuated Komatsu variable geometry turbocharger (KVGT) and an exhaust gas recirculation (EGR) valve, resulting in better precision and air management as well as longer component life. The Komatsu diesel particulate filter (KDPF) has an integrated design that will not interfere with daily operation but will keep the operator aware of its status, according to the manufacturer. • Sigmadozer blade for productivity The D155AX-7 is equipped with a Sigmadozer blade, which gives the machine a high blade capacity of 12.3 cu. yds. (9.4 cu m). Based on a new excavation theory, Sigmadozer improves dozing performance and increases productivity over a conventional semi-U blade. The blade features a frontal design concept adopted for digging and rolling material at the center of the blade. The new blade increases soil holding capacity. Digging resistance is reduced for a smoother flow of material so larger amounts of soil can be dozed with less power.

• Automatic transmission improves fuel economy The D155AX-7 has an automatic gearshift transmission and lock-up torque converter that reduces fuel consumption and offers enhanced power train efficiency. The lockup mechanics of the torque converter automatically transfers engine power directly to the transmission, decreasing fuel consumption by 10 percent. Because of the efficiency of the electronically controlled engine and transmission, fuel consumption is decreased while machine power is maintained. Two gearshift modes — automatic and manual — can be easily selected to fit the appropriate application: automatic for general dozing and manual for dozing and ripping rough ground. For maximum operating efficiency, the automatic gearshift transmission shifts to the optimal gear range based on the working conditions and load placed. • Ergonomic joystick controls for ease of operation and comfort Komatsu’s ergonomically designed palm command control system (PCCS) gives operators maximum control, offering a relaxed posture and superb fine control to eliminate operator fatigue. Thumb push buttons simplify transmission gear shifting. The electronic blade and new ripper control joystick offer excellent machine control. The ripper now incorporates a new auto-return function to increase operator efficiency when ripping. Engine speed is controlled using an easy-to-operate electronic throttle control dial, which eliminates maintenance of linkage and joints, according to the manufacturer.

• Electronic control powertrain for smooth operation The D155AX-7 uses an electronic control power train system that improves operation and productivity. Powerful turns under various work conditions are achieved with the hydrostatic steering system (HSS), which is driven by an independent hydraulic pump and motor to transmit power to both tracks without interruption. Counter-rotation is available for minimum turning radius, providing maneuverability. When operating in adverse conditions such as uneven ground, a K-bogie undercarriage system keeps the correct alignment between the rollers and links for a smoother ride as well as longer component life. • New cab design The new crawler dozer’s comfortable working environment allows the operator to concentrate on the work at hand for increased productivity. A new standard air ride seat with heat has a 15 percent higher capacity. The large cab is integrated with ROPS (roll-over protection) for added side visibility. The dozer’s cab mounts reduce shocks and vibration even over adverse conditions and the interior cab decibel is a very low 75 dB for the quietest working environment. A new, high-resolution large color 7 in. LCD monitor in the cab displays all machine information. This new generation smart monitor displays the information in 25 different languages providing exceptional global support. A rear view monitoring system is standard on the new model. For more information, visit www.komatsuamerica.com.

Komatsu’s D155AX-7 crawler dozer is powered by an EPA Tier IV Interim and EU Stage 3B emission certified Komatsu engine.

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • October 29, 2011 • Page 57

Atlas Copco Introduces New Series of KT Compressors Atlas Copco Compressors has developed a new line of portable piston compressors ideal for light industrial use, applications within the vehicle service market, as well as a wide range of construction applications. The new KT Range is a contractor series that provides compressed air in a portable package while offering durability to withstand daily wear-and-tear. “Providing dependable compressors for a diverse base of customers and industries remains our primary focus,” said Robert Eshelman, vice president of the industrial air range of Atlas Copco in the United States. “We developed these products using our timetested and proven technology that complements what we believe is already one of the most expansive ranges on the market.” The KT Range contractor series features seven new electric and gas-powered models, delivering up to 25.3 cfm at 100 psi, in a low-profile design complete with a semipneumatic wheel. Each model is made in the United States and ready for distribution to customers.

Electric models range from 1.5 to 2 hp (1 to 1.5 kW) and include special features such as a start-stop pressure switch control, a fully enclosed belt guard, tank drains and a discharge valve.

The KT Range contractor series features seven new electric and gas-powered models. The gas-driven models provide additional power, ranging from 5.5 to 12.75 hp (4 to 9.5 kW), and offer additional features beyond those included with the electric models, including engine slowdown (pilot valve) and low-oil level engine protection. For more information, visit www.atlascopco.com.

AUTHORIZED OEM DEALER Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talbert Protec Waldon Perkins Hensley

Bucyrus Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

YOUR PARTS SOURCE Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

Visit our website: www.howelltractor.com 2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

Page 58 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 59

Waste not, expect more – Hyundai 9 Series machines are loaded. Powerful Tier 3 Cummins Engines Advanced Hydraulic Technology Unparalleled Hydraulic Horsepower Heavy-Duty Design Industry-Best Total Coverage Warranty Industry-Leading Fuel Economy Industry-Leading Cycle Times

ILLINOIS

Burris Equipment Company Frankfurt • 815-464-6650 Ingleside • 815-363-4100 Waukegan • 847-336-1205 Diamond Equipment 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396 Fax: 618-242-9161

2000 Harlan Drive Terry Haute, IN 47802 812-299-4747 888-343-4747 Fax: 812-299-3687

NDA

R R A N

KANSAS

INDIANA Diamond Equipment 1060 Diamond Ave. Evansville, IN 47711 812-425-4428 dmfortune @diamondequipment.com www.diamondequipment.com

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

Industry’s Best Total Coverage Warranty:

• • • • • • •

QUALITY

Hardings Heavy Equipment 109 W. Commercial Ave. Lowell, IN 46356 219-696-8911 www.hardingsinc.com info@hardingsinc.com

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290 Garden City • 620-275-1996 Topeka • 785-267-4345 Wichita • 316-838-3346

KENTUCKY

Diamond Equipment 1046 Lovers Lane Bowling Green, KY 42103 270-781-1061 800-489-1061 Fax: 270-781-0907

www.hyundaiamericas.com

MICHIGAN

Midland Engine Midland • 989-631-4608

MINNESOTA

Titan Machinery Hermantown • 218-727-3038 Shakopee • 952-445-5400

MISSOURI

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290 Brookline Station • 417-887-2729 Joplin • 417-781-8222

WISCONSIN

Titan Machinery La Crosse • 608-788-1025

Page 60 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax: 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 10351 W. Laraway Rd. Frankfort, IL 60423 815/464-6650

Introducing the Kubota SVL Series. The new standard for productivity, comfort and speed on the worksite – with the proven power of a Kubota turbo-charged diesel engine. Everything you value for versatile, multi-terrain work. They’re all Kubota designed, engineered and manufactured – the compact track loaders only Kubota could build. Call today for a demo.

ARNOLD’S OF KIMBALL www.arnoldsinc.com 701 State Hwy 55 E • Kimball, MN 55353 320/398-3800 Fax: 320/398-6900

ARNOLD’S OF MANKATO www.arnoldsinc.com 1715 Howard Drive • No. Mankato, MN 56003 507/387-5515 Fax: 507/387-6449 www.kubota.com

Optional equipment may be shown. ©Kubota Tractor Corporation, 2010

HAUG-KUBOTA, LLC. www.haugkubota.com East Highway 12 3585E. Hwy 12 Willmar, MN 56201 320/235-2717 Fax: 320/235-2771

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 61

POWERFUL SOLUTIONS

Contact act your full service dealer for more information

McCann Industries

Luby Equipment Services

543 S. Rohlwing Rd Addison, IL 60101 630-627-0000

2300 Cassens Drive Fenton, MO 63026 636-343-9970

6500 Schaff Rd. Independence, OH 44131 216-446-3200 Fax: 216-573-7712

250 E. North Frontage Rd. Bolingbrook, IL 60440 630-739-7770

199 Airport Road Cape Girardeau, MO 63702 573-334-9937

11159 Royalton Rd. North Royalton, OH 44133 440-237-9040

2350 S. Laflin St. Chicago, IL 60608 312-942-9200

8853 Petrov Drive Caseyville, IL 62232 618-397-9971

35350 Chester Rd. Avon, OH 44011 440-832-7133 www.indyequipment.com

4701 West 137th Street Crestwood, IL 60445 708-597-3110

4375 Camp Butler Road Springfield, IL 62707 217-744-2233

1133 Indianapolis Blvd. Schererville, IN 46375 219-865-6545

2625 North 24th St. Quincy, IL 62305 217-222-5454 www.lubyequipment.com

1360 N. Rand Rd. Wauconda, IL 60084 847-526-9444 4102 W. Crystal Lake Rd. McHenry, IL 60050 815-385-0420 www.McCannOnline.com

Indy Equipment

Midwest Underground Supply

Star Equipment Ltd. 1401 2nd Avenue Des Moines, IA 50314 515-283-2215 Fax 515-283-0295 800-369-2215 2625 W. Airline Hwy. Waterloo, IA 50703 319-236-6830 Fax 319-236-6834 800-791-9249 2950 6th Street SW Cedar Rapids, IA 52404 319-365-5139 Fax 319-365-6726 800-728-5139 2100 E. Lincoln Way Ames, IA 50010 Ph: 515-233-9500 Fax: 515-233-9505 866-856-2312

Takeuchi understands the needs of the industry and responds with solutions. Track loaders feature high sprocket double reduction planetary reduction final drives which provide the most efficient use of power for more traction and digging force. Wheel loaders feature pushbutton 100% front and rear axle differential lock which provides immediate traction for superior digging and lifting power. Excavators feature pressure compensating piston pumps which provide smooth multi-function operation with unmatched breakkout force and control. Driven to provide maximum functionality and performance. Try a Takeuchi and feel the power ®

1106 32nd St. SW Bondurant, IA 50035 877-967-5656

Trenchers Plus 2309 West Highway 13 Burnsville, MN 55337 952-890-6000

8844 S. 135th St. Omaha, NE 68138 888-407-6500

2210 26th St. South Moorhead, MN 56560 218-477-3447

27285 Ironworks Rd. Harrisburg, SD 57032 605-368-9880

The Power of Product and Support www.takeuchi-us.com

Page 62 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WEST SIDE TRACTOR SALES CO. www.westsidetractorsales.com 1400 W. Ogden Ave. Napervile, IL 60563 630-355-7150 Fax: 630-355-7173 310 W. 162nd St. South Holland, IL 60473 708-331-6362 Fax: 708-331-7334 3110 Prairie Rd. Rockford, IL 61102 815-961-3160 Fax: 815-965-1810 1560 N. Old Rand Rd. Wauconda, IL 60084 847-526-7700 Fax: 847-526-3565 600 Walnut Court Rockdale, IL 60436 815-730-9011 Fax: 815-730-9036

JDE EQUIPMENT www.jdeequip.com 651 AIS Drive S.W. Grand Rapids, MI 49548 616-530-2000 • 800-664-3303 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121• 800-457-8121

Be fuel efficient with clean-burning ning Interim Tier Tier 4-certified engines while maximizing your productivity with smoothrunning, greater--than-ever horsepower, arm force, digging force, and lift capacities.

Traverse City 777 US 31S Traverse City, MI 49685 231-943-3996 • 800-968-1110

See your Hitachi dealer today about the exciting new crop of Dash-5 excavators. www w.hitachiconstruction.com .hitac RDO EQUIPMENT CO. www.rdoequipment.com 12500 DuPont Ave. S. Burnsville, MN 952-890-8880

the COLOR of QUALITY

1910 LorRay Dr. North Mankato. MN 506-387-1836 Wichita, KS 67217 800/262-0139

Kansas City, MO 888/306-3434

Columbus, OH 800/222-2010

Brunswick, OH 800/716-9796

Dodge City, KS 800/794-0172

Springfield, MO 888/306-2656

Cincinnati, OH 800/844-3734

Painesville, OH 866/800-1395

Great Bend, KS 800/264-4056

Gering, NE 800/205-6784

Lincoln, NE 800/416-5518

Des Moines, IA 800/822-2212

Vandalia (Dayton), OH 800/233-4228

Poland (Youngstown), OH 724/837-4500

Topeka, KS 800/279-6087

North Platte, NE 800/894-7060

Omaha, NE 800/416-5095

Fort Dodge, IA 800/362-2487

Lima, OH 800/423-7445

Ulysses, KS 800/472-9238

Grand Island, NE 800/868-4017

Waterloo, IA 800/772-2019

Sioux City, IA 800/352-4693

Canton, OH 866/235-0438

MURPHY TRACTOR & EQUIPMENT CO. www.murphytractor.com

1236 60th Ave. N.W. Rochester, MN 507-282-8888 6700 Highway 10 NW Sauk Rapids, MN 320-259-6222

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 63

Buck & Knobby Equipment Co. 6220 Sterns Rd Ottawa Lake, MI 49267 734-856-2811 Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com Paint Valley Equipment 10550 Twp Rd. 262 Millersburg, OH 44654 877-774-0081 330-674-4031 Titan Machinery Inc. 6304 Hwy. 101 Shakopee, MN 55379 952-445-5400 800-795-9274 Fax: 952-445-0365 16200 Hwy 10 Elk River, MN 55330 763-262-4474 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 N1626 Wuensch Road La Crosse, WI 54601 608-788-1025 Roeder Implement Inc. 2550 Rockdale Rd. Dubuque, IA 52003 563-557-1184 Fax: 563-583-1821 Vermeer Midwest 2801 Beverly Dr. Aurora, IL 60502 630-820-3030 PO Box 224 Eureka, IL 61530 309-467-3716 1801 179th Ave. Moline, IL 61244 309-751-9540 13402 Britton Park Rd. Fishers, IN 46038 317-842-1040 3566 Citadel Circle Newburgh, IN 47630 812-490-4400 3310 West Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494 PO Box 273 17550 Chesterfield Airport Rd. Chesterfield, MO 63006 636-532-2332 1005 Thorez Rd. Jackson, MI 49201 517-750-3783 1196 A Franklin St. Marne, MI 49435 616-677-5900 Vermeer of Iowa PO Box 168-661 Hwy T14 Pella, IA 50219 641-628-2000 Vermeer Siouxland 4858 D Ave. Marcus, IA 51035 712-376-2310 Vermeer of Eastern Iowa 101 Commerce Blvd. Tipton, IA 50219 563-886-2444

Page 64 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

James McHugh Construction Co. Workers Get Lunch Break From McCann Industries WACKER from page 12

Utility work continues in the Washington trolley tunnel.

James McHugh Construction Co. workers line up for a lunch provided by McCann Industries.

(L-R): McCann Industries Vice President of Sales & Marketing Jim McCann, Craig Frier of Sika Corp. and Mike Lally, ironworker superintendent of James McHugh Construction Co., talk about phase II of the Wacker Drive project.

McCann Industries Sales Representative Damian Allen (L) and James McHugh Construction Co. Superintendent Dale Hendrix share some thoughts about the Wacker Drive project. Hendrix has been with the James McHugh Construction Co. for 51 years.

(L-R): Sid Adema of James McHugh Construction Co., Damian Allen of McCann Industries, and Dale Hendrix, Rich Phelan and Dave Steffenhagen of James McHugh Construction Co. share a few laughs after the lunch provided by McCann Industries.

Phase II of the Wacker Drive job is well under way.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 65

maximize efficiency. minimize costs.

Let’s Work. Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusive OptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates. With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and a higher earning potential for you. Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.

McALLISTER EQUIPMENT CO. 28775 Beck Rd. Wixom, MI 48393 248/449-6700 Muskegon, MI 231/798-8754 Kentwood, MI 616/698-2960

Battle Creek, MI 269/965-1269 Romulus, MI 734/641-8238 Saginaw, MI 989/752-9400

Sterling Hts, MI 586/977-6000 Zeeland, MI 616/748-4108 Lansing, MI 517/272-5033

Wixom, MI (Cons. Division) 248/356-5200 Byron Center, MI 616/878-7450

12500 S. Cicero Ave. Alsip, IL 60803 708/389-7700 Villa Park, IL 630/530-7600

Rockford, IL 815/227-0555 East Peoria, IL 309/694-4455 Springfield, IL 217/789-0351

Evansville, IN 812/867-6661 Fort Wayne, IN 260/482-3681 Indianapolis, IN 317/247-9125

Corbin, KY 606/528-9440 Louisville, KY 502/456-4050

Prestonsburg, KY 606/874-2104 St. Louis, MO 314/487-8925

Page 66 â&#x20AC;˘ October 29, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

TIGHT SPOTS

EXCELS in

Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800/861-1065 www.cte-equipment.com

With powerful Yanmar diesel engines, the 3640E and 4240E models are little giants that maneuver easily in tight spaces and handle tough jobsite

Howell Tractor Company Peru, IL 800/342-6072 Gary, IN 800/852-8816

challenges. â&#x20AC;˘ &RPSDFW ORZ SURÂżOH GHVLJQ IRU PDQHXYHUDELOLW\ LQ QDUURZ ORZ FOHDUDQFH DUHDV â&#x20AC;˘ All-TachÂŽ DWWDFKPHQW PRXQWLQJ V\VWHP FRPSDWLEOH ZLWK PRVW DWWDFKPHQWV â&#x20AC;˘ ,PSURYHG GULYH FRQWUROV UHTXLUH OHVV HIIRUW DQG UHGXFH RSHUDWRU IDWLJXH

Holt Equipment Louisville, KY 800/507-9705 Bowling Green, KY 270/842-3400 London, KY 877/231-7151 Lexington, KY 800/463-8722

â&#x20AC;˘ 6SDFLRXV RSHUDWRUÂśV FRPSDUWPHQW ZLWK FKRLFH RI 7 EDU ÂłKDQGV RQO\Â´ RU KDQG IRRW FRQWUROV

Elder Ag and Turf East Palestine, OH 330/426-2166

Dealer Imprint gehl.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 67

The Difference is in the D-tails. You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options such as electrohydraulic joysticks, variable boom and bucket speed settings, and more than 100 attachments to let you take on more tasks. Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to become owner and operator favorites. Ask for a demo today.

www.johndeere.com

www.erb equipment.com Fenton, MO 63026 636/349-0200 Cape Girardeau, MO 63703 573/334-0563 Foristell, MO 63348 636/673-2131 Cuba, MO 65453 573/885-0500 Mt. Vernon, IL 62864 618/244-6800 Paducah, KY 270/554-1131 Owensboro, KY 270/684-2339 Evansville, IN 812/473-0484

www.lec1.com 8331 Meade Springer Rd. Ashland, KY 41102 606/928-3477 195 Sykes Blvd. Pikeville, KY 41502 606/432-0321 105 Tennis Center Dr. Marrietta, OH 45750 740/373-5255 60611 Hulse Dr. Cambridge, OH 43725 740/439-2747 5775 US Rt. 23 South Chillicothe, OH 45601 740/663-5300

www.westside tractorsales.com 1400 W. Ogden Ave Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 708/331-6362 Rockdale, IL 815/730-9011 Wauconda, IL 847/526-7700 Rockford, IL 815/961-3160

www.murphytractor.com Sioux City, IA 800/352-4693 Waterloo, IA 800/772-2019 Dodge City, KS 800/794-0172 Great Bend, KS 620/792-2748 Topeka, KS 785/233-0556 Ulysses, KS 620/356-1071 Wichita, KS 800/262-0139 Kansas City, MO 888/306-3434

Springfield, MO 888/306-2656 Gering, NE 800/205-6784 Grand Island, NE 800/868-4017 Lincoln, NE 800/416-5518 North Platte, NE 800/894-7060 Omaha, NE 800/416-5095 Brunswick, OH 800/716-9796 Canton, OH 866/235-0438

Cincinnati, OH 800/844-3734 Columbus, OH 800/222-2010 Lima, OH 800/423-7445 Poland, OH 866/503-7259 Vandalia, OH 800/233-4228 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500

Page 68 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

B & W Equipment Company, Inc. 3520 Meyer Road Fort Wayne, IN 46806 800-242-4819 www.bandwequipment.com

Pat Kelly Equipment Company Construction Machinery Company

5920 N. Lindbergh 2911 S. English Station Rd. Blvd Louisville, KY 40299 Hazelwood, MO 63042 502-267-4020 314-895-9500 www.cmcky.com www.patkelly.com 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 www.cmcky.com

Newman Equipment, Inc. 1315 Terminal Rd Indianapolis, IN 46217 317-781-8100 www.newmanequip.com

Steve's Equipment Service, Inc.

1400 Powis Rd. West Chicago, IL 60185 630-231-4840 Pat Kelly Equipment Company www.sesequip.com 5920 N. Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com

6915 West Chicago Ave. Gary, IN 46406 219-949-9595 www.sesequip.com Steve’s Equipment Service, Inc 1400 Powis Road West Chicago, IL 60185 630-231-4840 www.sesequip.com 6915 West Chicago Ave Gary, IN 46406 219-949-9595 www.sesequip.com

Swiderski Equipment, Inc. – Since 1925 Mosinee, WI • 715-693-3015 Wausau, WI • 715-675-2391 Thorp, WI • 715-669-5255 Antigo, WI • 715-623-4668 Waupaca, WI • 715-258-3266 Appleton, WI • 920-757-9363

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 69

Page 70 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2011 ICUEE Attracts Nearly 16K Attendees to Louisville

Paladin Dealer Development Manager Dave Aldrich demonstrates Paladin’s new prototype 655 rock trencher.

(L-R): Mitch Smith of Vermeer Midwest talks about Vermeer’s RTX 500 trencher with Timothy Weygandt of Comed, Chad Van Soelen of Vermeer and Michael Radziewicz of Comed.

ICUEE from page 8

Todd Jurjevic of Minnich Concrete Vibrators & Dowel Pin Drills enjoys the weather while greeting attendees.

Caterpillar National Account Program Manager Jason Conklin (L) gives Paul Moore of Swift & Son, Shelbyville, Ind., a few pointers on operating a Cat 420E backhoe.

(L-R): John Graber and Craig Zafaras (in cab) of All Equipment Repair try out Volvo’s ECR48C compact excavator while Volvo’s Andy Capps and Chris Price point out the machine’s features.

(L-R): Case Construction’s Brand Manager Rob Marringa, Manager of Corporate Accounts Rob Manthei, and Product Sales Training Manager David Pariso are ready to talk about the Case 221 Series 3 wheel loader with show goers.

(L-R): JCB’s Meg Albertson and Neil Smith get some assistance from Walsh Equipment’s Mike Sarver at the JCB equipment display. see ICUEE page 92

Paving

SECTION

Pages 71-81 Terex Bid-Well 4800 features a 48 in. (91.4 cm) truss and all-welded steel construction to maximize frame strength and minimize weight.

Terex Bid-Well 4800 Paver Based on 50 Years’ Experience Capable of paving bridges, streets and highways, today’s Terex Bid-Well 4800 paver from Terex Roadbuilding draws from 50 years of concrete paving experience. The 4800 features a 48 in. (91.4 cm) truss and all-welded steel construction to maximize frame strength and minimize weight. The automatic roller paver is capable of paving widths of more than 170 ft. (51.8 m), optimizing machine flexibility to pave a wide variety of bridges. Powered by a 23 hp (17 kW) gas engine, the 4800’s paving carriage performs four concrete deck finishing functions. Dual, double-flighted augers meter the concrete to maintain a consistent head of material in front of the carriage. The 11.5 in. (29.2 cm) Rota-Vibe system uniformly consolidates the top 2.5 in. (6.3 cm) of concrete to facilitate sealing of difficult-to-finish designs. Dual, 5 ft. (1.5 m) long paving rollers finish the concrete surface, while a trailing drag pan system seals and textures the deck. Positioned on top of the frame, the operator’s console of

the Terex Bid-Well 4800 is designed for operator visibility and provides easy access to machine and carriage movement. From the console, the operator controls machine travel speed, power up and down leg adjustment, manual shift for carriage reversing and carriage travel speed. Operators also control a number of options without leaving the console, including power crown adjustment, internal concrete vibration system, power leg widening and carriage/drag pan fogging system. The standard paver rides the rails on four machine travel bogies, offering a 4 ft. (1.2 m) wheel base, and four heavyduty, 6 in. (15.2 cm) tubular legs with hydraulically adjustable height. To increase paving versatility, the 4800 provides up to 15 ft. (4.7 m) of leg travel to each side to accommodate width changes on the fly. The Terex Bid-Well 4800 paver on display at World of Concrete in Las Vegas, Nevada included a number of different options, designed to maximize paving versatility. The

available paving carriage/drag pan fogging system atomizes the water to produce a true, light fog. This keeps the concrete from drying too quickly to reduce cracking and produce a stronger surface. When operating the paver in confined construction zones, the optional swing leg design offers zero-clearance paving. These variable-position, offset legs attach to the paver’s main frame and provide an additional length of 2 ft. (0.61 m) for variable-width paving. The available pivoting leg option for the 4800 saves contractors time and money when paving bridges with cross slopes of more than 8 percent. This optional feature pivots the leg to a true vertical position when paving superelevations, decreasing the side forces on the rail system and reducing the need for additional shoring. Also equipping the machine with available neoprene bogies provides better traction when paving superelevations and grades. For more information, visit www.terex.com.

Page 72 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Power Pavers Unveils SF-1700 Compact Slip-Form Paver

By reducing the engine size and main frame width, the SF-1700 is a more compact size than the SF-2700.

Power Pavers has a new compact slip-form paver — the Power Paver SF-1700. “With the ability to pave up to 7.5 meters wide, the SF1700 was developed to react to the contractor demand for two-pass paving in many highway applications. The response to the SF-1700 has been excellent and we are getting great reports from our customers who have put them to work,” said Fred Hite, general manager of Power Pavers Inc. “In fact, we placed machines in three countries within a

The frame of the SF-1700 is based on Power Paver’s current leading machine, the SF-2700.

month of the machine’s introduction.” The frame of the SF-1700 is based on Power Paver’s current leading machine, the SF-2700. By reducing the engine size and main frame width Power Pavers was able to make the SF-1700 a more compact, economical alternative to contractors desiring to pave highways in two passes. “In many developing countries, concrete supply is an issue, so paving in two passes is more practical than one pass,” explained Hite. Standard equipment on the SF-1700

includes a 160 hp (119 kW) Cummins engine, spread auger and tamper bar, and 12 Wyco vibrators. Power Pavers Inc., a subsidiary of Power Curbers Inc., manufactures a full line of slip-form concrete equipment for use in residential, highway and airport paving. Based in Cedar Falls, Iowa, in addition to slip-form pavers, Power Pavers offers form pavers, placer/spreaders, and texture/cure machines to paving contractors. For more information, visit www.powerpavers.com.

Dynapac C-Series Goes to Work on Smaller Jobs

The CC800, CC900 and CC1000 models offer an operating weight of approximately 1.6 tons (1.4 t). The series of machines come in drum widths of 31, 35 and 39 in. (78.7, 89 and 99 cm).

The Dynapac series of small tandem rollers are designed primarily for small-scale compaction work, such as driveways, bicycle paths, small roads and small parking areas. The CC800, CC900 and CC1000 models offer an operating weight of approximately 1.6 tons (1.4 t). The series of machines come in drum widths of 31, 35 and 39 in. (78.7, 89 and 99 cm). The machines are fitted with a central lifting eye that is designed to allow fast and simple loading for transportation. The folding ROPS is intended to keep the transport height to a minimum and working under obstructions. Equipped with water-cooled, three-cylinder Perkins 23.5 hp (17.5 kW) diesel engines, the small tandem rollers offer standard propulsion and vibration on both drums. A switch to turn off vibration on the front drum is standard.

A rear drum shut-off can be added as an additional option. The 50-gal. (189 L) water tank and the Wutomatic Water Control (WAC) system is intended to maximize periods of time between refills. The WAC system used on the CC800, CC900 and CC1000 machines also is used on larger Dynapac asphalt machines. The machines are equipped with a new type of self-draining sprinkler tube and nozzles, which are intended to minimize the risk of ice plugs in cold weather conditions, according to the manufacturer. A vibration-damped operator’s stand and an ergonomically positioned step are intended to make the machines driver-friendly. Service intervals have been extended and the machines are equipped with a maintenance-free steering hitch and steering cylinder. For more information, visit www.dynapac.us.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 73

Our rollers are pretty basic. Basically perfect. BOMAG improves on perfection with the BW120AD-4 roller. Want a roller that will finish the job better, faster and more efficiently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG. To do the best job, you need the best equipment. To learn more visit www.bomag-americas.com, or call 1-800-78-BOMAG today.

THE COMPACTION EXPERTS

1400 W. Ogden Ave. Naperville, IL 60563 630/355-7150 Rockford, IL 815/961-3160

South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Rockdale, IL 815/730-9011

200 Erb Industrial Dr. Fenton, MO, 63026 636/349-0200

Cuba, MO 573/885-0500

Evansville, IN 812/473-0484

Foristell, MO 636/463-2500

Owensboro, KY 270/684-2339

Mount Vernon, IL 618/244-6800

Cape Girardeau, MO 573/334-0563

Paducah, KY 270/554-1131

Page 74 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

3517 Wayne White Rd., Climax, NC 27233 Sales: tracy@jfwequipment.com Parts: eric@jfwequipment.com

866-430-7539

www.jfwequipment.com

1981 Blaw Knox RW 100 road widener, broom, hydrostatic drive, J.D. diesel engine

1995 Rosco SPRH-H chip spreader, hydrostatic drive, Cummins diesel engine, 13 ft 6 inch spread hopper

2002 Rosco Tru-Pac 915 rubber tire 9 wheel roller, Cummins 3.3L diesel engine, ROPS canopy, water system w/plastic water tank, skirts around tires

1999 Rosco Maximizer II distributor, 1750 gallons, EZ-1S computer w/1 ft cut-offs, diesel heat, 14 ft spray bar, IH 4700 w/DT466E diesel engine, 6+ trans (7 spd- 6 plus low gear), air brakes

New Marathon TPS250T tack distributor, trailer mounted, Honda 5.5hp gas engine, 10GPM pumping system, 250 gallon capacity, 5 ft spray wand w/40 ft hose, 10" filler lid, hose reel, electric brakes

2005 Blaw Knox PF 3200 paver, Omni IIIA screed 10-18 ft, Cummins diesel engine, power crown & slope, smoke eater

2003 Hypac C530AH pneumatic rubber tire roller, Cummins 3.3L diesel engine, co co mats, water system, canopy

Marathon KERA260HD rubberized melting kettle for crack sealing and waterproofing, 260 gal., 26hp liquid cooled 3-cyl Kohler dsl engine, 2 dsl burners, auto. temp. control, hyd. agitation, patented 18 ft oil-heated hose sys., heated applicator wand w/ 3" O.D. swivel sealing shoe, overnight heating, 80 cfm air compressor w/40 ft air hose, strobe light

Powermoon 2000W balloon light, lights 20,000 sq. ft, no glare, No harsh shadows, wide light distribution, High portability – Small storage Solid & robust, perfect for paver mounts, safety and work efficiency at night increase enormously!

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years

Naperville, IL 630-3555 7150

SALES - RE ENT TAL - PARTS - SE ERVICE

Rockfford, IL 815-961-3160 South Holland, IL 708-331-6362 Wa auconda, IL 847-526-77 7700 Rockdale, IL 815-7300 9011

hatever the Work...W West Side Tractorr Sales

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 75

Mauldin’s 1750-C Super Paver is ready for fast and hard action. Unmatched performance and durability set this heavyweight apart from all others.

M413XT

Check the details at www.4aMauldin.com. MG622

Precision Spray

Discover More Ways Mauldin Can Help You Become a Master

of the Mat.

Calder Brothers Corporation 250 E. Warehouse Ct. | Taylors, SC 29687

phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com Finkbiner Equipment Co.

Mohican Valley Equipment

15 W 400 No. Frontage Rd. Burr Ridge, IL 60527 (630) 654-3700 Fax: (630) 654-3792 www.finkbinerequipment.com

2349 Twp. Rd 257 Jeromeville, OH 44840 (419) 368-7020 www.mohicanvalleyequipment.com

Whayne Supply Co. 1400 Cecil Ave. • Louisville, KY 40211 (502) 774-4441• Fax: (502) 778-3543 www.whayne.com Ashland, KY (606) 928-3444 Bowling Green, KY (270) 843-3275 Corbin, KY (606) 528-3140 Evansville, IN (812) 425-4651 Hazard, KY (606) 439-4040

Hopkinsville, KY (800) 494-2963 Lexington, KY (859) 254-2756 Paducah, KY (270) 443-3631 Pikeville, KY (606) 437-6265

Miller-Bradford & Risberg, Inc. W250 N6851 Highway 164 Sussex, WI 53089 (262) 346-5700 Fax: 262-246-5719 Madison, WI (608) 222-9191 Eau Claire, WI (715) 832-3443 DePere, WI (920) 338-5800 Abbotsford, WI (715) 223-2381 Negaunee, MI (908) 475-4181 www.miller-bradford.com

Page 76 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Sakai’s Compact Roller Line Utilizes 4000 VPM Feature

Road Machinery & Supplies

McAllister Equipment Co.

Savage, MN 952/895-9595 800/888-9515

Des Moines, IA 218/741-9011 800/555-1445

12500 S. Cicero Ave. Alsip, IL 60803 708/389-7700

Duluth, MN 218/727-8671 800/888-9535

Sioux City, IA 712/252-0538 800/633-9104

Villa Park, IL 630/530-7600

Grand Rapids, MN 218/328-5916 800/459-5916

Cedar Rapids, IA 319/363-9655 800/616-6615

Rockford, IL 815/227-0555

East Peoria, IL 309/694-4455 Springfield, IL 217/789-0351

SAKAI America’s 300 Series rollers con- the machine and controls are conveniently sist of three small double drum steel and two located and within reach of the operator for combination steel/pneumatic tire roller mod- ease of use. els, all of which boast a high frequency of SAKAI holds high safety standards and 4,000 vpm. This translates into higher oper- provides seatbelts and ROPS as standard ating speeds, while still maintaining the features on all rollers in North America. The industry standard of 10 to 12 impacts per ROPS also are foldable for ease of transport foot. and storage of the rollers. In addition to The higher operating speeds and high fre- these safety features, SAKAI also provides quency of the 300 Series allow contractors to multiple braking systems that ensure operaget more compaction work completed tor safety. A hydrostatic service brake is before the asphalt cools and to achieve located on the forward- reverse lever, a wet excellent compaction quickly. This process disc, spring-applied, hydraulically-released increases productivity and along with parking brake is located on the instrument machined drums and beveled drum edges, panel and there’s an emergency footbrake, leaves a smooth, well compacted result. which activates both brakes simultaneously. Serviceability is quick and easy on the The SW300-1, SW320-1 and SW330-1 double drum rollers have drum widths of 39, 47 and 51 in. (99, 119 and 129.5 cm) respectively and are ideally suited for smaller scale jobs like municipal roads, driveways, parking lots, sports courts and bicycle paths. SAKAI’s TW320-1 and TW330-1 rollers combine both vibratory drum and pneumatic tires. These models feature 47 and 51 in. vibratory drums respectively on the front end for fast compaction; and the kneading action of pneumatic tires on SAKAI America’s 300 Series rollers consist of three the rear for surface finishing. small double drum steel and two combination All five models feature a steel/pneumatic tire roller models, all of which boast a hydrostatic drive on both high frequency of 4,000 vpm. ends of the machine. These dual drive systems ensure that materials will 300 Series rollers. A fully opening engine always be pulled beneath the drums or tires hood allows for easy access to the engine, to ensure compaction, while avoiding shov- radiator and hydraulic components. The ing and checking of the mix. Also standard hydraulic system has been designed with on all five models, is a powerful, yet fuel- conveniently located pressure gauge ports efficient 35 hp (26 kW), Kubota D1703-M- for easy access. SAKAI also has incorporated its water ET01 water-cooled diesel engine that fully complies with the current U.S. emission spray system to the 300 Series rollers. This system features long-lasting brass spray nozstandards. The 300 Series rollers custom designed zles that can be easily changed by hand, a shock isolators reduces service and mainte- triple filtration system to prevent debris from nance time on the roller by keeping vibration clogging the system, emergency back-up moving toward the material and away from pumps and a drainage system for clean-out critical components and the operator, reduc- and winterization. SAKAI also offers a ing fatigue. In addition to the shock isolation release agent to keep asphalt from sticking to system, the vibrator bearing is designed with the pneumatic tires of the TW320-1 and models during warm-up. This an oil bath lubrication system that minimizes TW330-1 release agent is stored in a separate tank and maintenance, according to the manufacturer. uses an independent spray bar and pump to SAKAI’s bench seat system offers opera- keep it from mixing with the main water tor comfort as well as 360 degree visibility tank and spray system. and view of both drum edges. The operaFor more information, call 1-800-323tor’s station is accessible from both sides of 0535, or visit www.sakaiamerica.com.

Construction Equipment Guide â&#x20AC;˘ Paving Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 29, 2011 â&#x20AC;˘ Page 77

Double Drum High-Frequency Vibratory Asphalt Roller Dynapacâ&#x20AC;&#x2122;s CC624HF double-drum high-frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features: Â&#x2021; 30,000-pound operating weight Â&#x2021; 84-inch wide, 60-inch diameter drum Â&#x2021; Compaction vibratory force of 23,850 to 37,350 lbs Â&#x2021; Static linear load of 158 lbs/in Â&#x2021; Vibration frequency from 3,060 to 4,020 vpr Â&#x2021; Powered by a 152 hp Cummins QSB 4.5 T3 engine Â&#x2021; Rear engine position and large, easy-to-open engine hood makes maintenance a snap Â&#x2021; â&#x20AC;&#x153;Softâ&#x20AC;? start and stop prevents asphalt unevenness or cracking Â&#x2021; Optional Dynapac Compaction Analyzer for Asphalt provides critical information for quality paving '\QDSDF && +) ÂŤ XOWLPDWH LQ YLVLELOLW\ IXHO HIÂżFLHQF\ DQG SHUIRUPDQFH HIÂżFLHQWO\ FRPSDFWLQJ DQ\ W\SH RI DVSKDOW PL[

Authorized Dynapac Dealers Brooks Tractor www.brookstractor.com

Construction Machinery Company

Hayden - Murphy Equip. Co.

www.cmcky.com

www.hayden-murphy.com

608.837.5141

Columbus Equipment Company www.columbusequipment. com

Owensboro, KY

Milwaukee, WI

Columbus, OH

877.683.2262

Minneapolis, MN 952.884.2301

614.443.6541

Louisville, KY

Toledo, OH

866.901.2262

Sun Prairie, WI

414.462.9790

West Salem, WI 608.786.2644

419.872.7101

De Pere, WI

Cincinnati, OH

920.336.5711

Diamond Equipment

Logan Contractors Supply www.logancontractors.com

513.771.3922

www.diamondequipment.com

Omaha, NE

5LFKÂżHOG 2+

Bowling Green, KY

402.339.3900

Casey Equipment www.casey-equipment.com

330.659.6681

270.781.1061

Des Moines, IA

Cadiz, OH

Evansville, IN

515.253.9048

Arlington Heights, IL

740.942.8871

812.425.4428

Bettendorf, IA

847.437.8686

Dayton, OH

Mt. Vernon, IL

563.441.2949

Lemont, IL

937.879.3154

618.242.2273

630.257.1261

Canton, OH

Terre Haute, IN

Luby Equipment www.lubyequipment.com

Rockford, IL

330.453.4521

812.299.4747

815.332.8222

Painesville, OH

636.343.9970

440.352.0452

DMI Diesel Machinery, Inc.

Piketon, OH

www.dieselmachinery.com

217.222.5454

Sioux Falls, SD

Oâ&#x20AC;&#x2122;Fallon, MO

605.336.0411

636.332.9970

Aberdeen, SD

Cape Girardeau, MO

605.725.4364

573.334.9937

740.289.3757

Rapid City, SD 605.348.7438

Dynapac USA

3700 East 68th Avenue Commerce City, CO 80022

Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us

Fenton, MO Quincy, IL

MacDonald Machinery

Titan Machinery

www.macdonaldmachinery.com

www.titanmachinery.com

Lafayette, IN

Bismarck,ND

765.742.2080

701.250.7925

Fort Wayne, IN

Minot, ND

260.747.1561

701.852.3188

South Bend, IN

Fargo, ND

574.271.0800

701.237.3333

Indianapolis, IN 317.856.3000

The Victor L. Phillips Co. www.vlpco.com

NCS Equipment

Topeka, KS

www.ncsequipment.info

785.267.4345

Hastings, NE

Wichita, KS

402.462.2252

316.838.3346

Kearney, NE

Garden City, KS

308.237.0777

620.275.1996

Grand Island, NE

Kansas City, MO

308.398.0640

816.241.9290

Lincoln, NE

Joplin, MO

402.466.1550

417.781.8222

Bertrand, NE

6SULQJÂżHOG 02

308.472.5077

417.887.2729

Columbus, NE 402.562.1550

Page 78 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Wirtgen America Unveils W 50 DC Rumble Strip Cutter Wirtgen America’s new highperformance rumble strip cutter — the W 50 DC Rumbler is a standard W 50 DC cold milling machine with an optional Rumbler attachment installed, providing cutting of milled rumble strips in the standard, preferred 16-in. width at speeds of up to 180 fpm (55 m). Without the Rumbler installed, the deep-cutting W 50 DC cuts 8 in. (20 cm) deep and a variety of widths up to 20 in. (50.8 cm). It has a Deutz 123 hp (91 kW) diesel engine, combined with a more robust 17,000-lb. (7,711 kg) design, 7in. (17.7 cm) turning radius and standard rear loading conveyor. Addition of the Wirtgen Rumble Strip Milling attachment results in a durable, reliable cold mill for general milling use, combined with a milling technology for cutting milled rumble strips in shoulders, or down centerlines of two-way pavements, according The W 50 DC Rumbler is a standard W 50 DC cold milling machine with an optional Rumbler attachment installed. to the manufacturer. The W 50 DC Rumbler features a six-sided rumble wheel with urethane pads, powered by a hydraulic rumble wheel Roland Machinery drive. The Rumbler drum and wheel can be mounted on Company either the left- or right-hand side of the W 50 DC, with easy DePere, WI cutter access. 920/532-0165 The W 50 DC Rumbler cutter drive is an extension of the Deforest, WI 608/842-4151 W 50 DC’s standard drum drive system, using a mechanical 866/475-7040 belt drive. Franksville, WI A simple wheel/pad assembly rolls along the pavement 262/835-2710 800/811-6005 surface to actuate the Rumbler sub-frame in and out of the cut. Custom drum widths and pad sets are available. Special Schofield, WI 715/355-9898 patterns can be achieved with special rumble wheel pads; 866/475-7016 intermittent patterns can be achieved with the available skip Eau Clair, WI line kit. For optimal cutting, W1-10/S-R Rhino bits can be 715/874-5400 866/475-7035 used. A standard, long front pointer is designed for stable, accuEscanaba, MI 906/786-6920 rate correction when on the job, essential for tracking inter800/236-6425 mittent references like the pavement “drip” line or a centerSpringfield, IL line. A short pointer also is installed as a standard. Both pro217/789-7711 800/252-2926 vide a dual reference, which can give the operator a better Carterville, IL sense of the W 50 DC Rumbler’s position. 618/985-3399 800/274-7202

Bridgeton, MO 314/291-1330 800/274-7230 Cape Girardeau, MO 573/334-5252 800/274-7210 Columbia, MO 573/814-0083 800/274-7212 Palmyra, MO 573/769-2056 800/274-7214

VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, N.C. 28092 • 704.966.3300 • www.leeboy.com

Portage, IN 219/764-8080 888/764-8226

Why Milled Rumble Strips? The Federal Highway Administration’s Technical Advisory (T 5040.35) endorses shoulder rumble strips for driver safety from run-off-road events, and maintains that milled-in strips are the best option. FHWA said milled rumble strips are superior because they have little or no effect on the integrity of the pavement structure, and produce greater noise and vibration than rolled or formed rumble strips While rumble strips can be rolled-in for freshly placed asphalt shoulders, research by the Pennsylvania Turnpike Commission found strips milled into existing shoulders to be superior to rolled-in rumble strips.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 79

The Worldwide Leader in Concrete Paving Technology

800-831-2320 ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA

ROAD MACHINERY & SUPPLIES Des Moines, IA 218/741-9011 • 800/555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319/363-9655 • 800/616-6615 Milan, IL 309/787-1742 • 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Corbin, KY 606/528-3700 • Fax: 606/528-9014

Lexington, KY 859/259-3456 • Fax: 859/254-0783 Stanville, KY 606/478-9201 • Fax: 606/478-9208 Paducah, KY 270/444-8390 • Fax: 270/575-4907

SWANSTON EQUIPMENT COMPANY 3450 West Main Fargo, ND 58103 800/369-0371 2219 Elk Drive Minot, ND 58107 800/210-8766

Page 80 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

BRANDEIS MACHINERY & SUPPLY COMPANY

ROLAND MACHINERY DePere WI 920/532-0165 • 920/532-0526 Deforest WI 608/842-4151 • 866/475-7040 Franksville WI 262/835-2710 • 800/811-6005 Schofield WI 715/355-9898 • 866/475-7016 Eau Claire, WI 715/874-5400 • 866/475-7035

Escanaba MI 906/786-6920 • 800/236-6425 Springfield, IL 217/789-7711 • 800/252-2926 Marengo, IL 815/923-4966 • 800/765-2635 Bolingbrook IL 630/739-7474 • 800/826-9608 Carterville, IL 618/985-3399 • 800/274-7202

Bridgeton, MO 314/291-1330 • 800/274-7230 Cape Girardeau, MO 573/334-5252 • 800/274-7210 Columbia, MO 573/814-0083 • 800/274-7212 Palmyra, MO 573/769-2056 • 800/274-7214 Portage, IN 219/764-8080 • 888/764-8226

1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Evansville, IN 812/425-4491 • Fax 812/425-1171 Corbin, KY 606/528-3700 • Fax 606/528-9014 Lexington, KY 859/259-3456 • Fax 859/254-0783

Stanville, KY 606/478-9201 • Fax 606/478-9208 Paducah, KY 270/444-8390 • Fax 270/575-4907 Indianapolis, IN 317/872-8410 • Fax 317/872-8417 Ft.Wayne, IN 260/489-4551 • Fax 260/489-1620 South Bend, IN 574/233-8770 • Fax 574/233-8775

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 81

ROAD MACHINERY & SUPPLIES COMPANY

CASEY EQUIPMENT COMPANY

5633 W Hwy 13 Savage, MN 55378 952/895-9595 • 800/888-9515 Duluth, MN 218/727-8671 • 800/888-9535 Grand Rapids, MN 218/328-5916 • 800/459-5916 Virginia, MN 218/741-9011 • 800/752-4304

1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 • Fax: 847/437-8738 16754 New Ave. Lemont, IL 60439 630/257-1261 • Fax: 630/257-0614 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222 • Fax: 815/332-3056

www.casey-equipment.com

ROLAND MACHINERY Springfield, IL 217/789-7711 • 800/252-2926 Carterville, IL 618/985-3399 • 800/274-7202 Portage, IN 219/764-8080 • 888/764-8226 Bridgeton, MO 314/291-1330 • 800/274-7230

Cape Girardeau, MO 573/334-5252 • 800/274-7210 Columbia, MO 573/814-0083 • 800/274-7212 Palmyra, MO 573/769-2056 • 800/274-7214 Eau Claire, WI 715/874-5400 • 866/475-7035

DePere, WI 920/532-0165 • 866/475-7047 Deforest, WI 608/842-4151 • 866/475-7040 Franksville, WI 262/835-2710 • 800/811-6005 Schofield, WI 715/355-9898 • 866/475-7016 2600 S. Lincoln Rd. Escanaba, MI 906/786-6920 • Fax: 906/786-5813

Page 82 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

The 2011 EZ-Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 25-hp KOHLER Diesel Engine......$39,500 plus freight

2007 Mustang ME3003 - Mini Excavator, with long arm and 16" bucket, 36 HP, 112 Hrs, Full warranty .................................................$23,700 Top Notch Equipment 612/290-0640 22-23 PK

2002 Bombardier SW48, 100HP Diesel, 473 Hrs, 2955 Miles, Cab & Heat, Tracks are in Great Shape ...........................................$17,500 22-23 PK 763/428-4107

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 22-23 PK 763/444-8873

NEW 2008 TEREX 4792, 23 1/2 ton boom truck, 92’ main boom, 26’-44’ jib, front outrigger, block, ball, LMI, 21’ steel bed, mounted on a NEW 2008 Sterling 300 HP Cummins, Cleveland, Ohio........... ........................................................................CALL Call Andy at 216-316-1511 21-22 EB

2002 Kobelco ED 190 Blade Runner, s/n YL02U0117, 6720 Hrs, VERY GOOD CONDITION, 10’2” Arm w/48” Bkt ....................................$65,000 21-22 JM Call David 219-696-5680

2005 Case CX240LC, s/n 241488, 6003 Hrs........... ....................................................................$69,000 21-22 JM Call David 219-696-5680

1991 John Deere 300D, S/N 775834, Open ROPS..........................................................$19,000 Call 502/456-4050 Ask for Melissa or Albert 21-22 EB

2001 New Holland LB75.B, 4WD, 3455 Hrs, Cab w/Air and Heat, 4WD Dipper Extendable...$28,500 Call Gary Mertz @ 314-895-9500 22-23 JM

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 1-800/456-4005 Ask for Don or Herb 22-23 PK

2004 Takeuchi TL140, s/n 21402072, 2999 Hrs, Cab w/Heat & A/C, Faster Hyd Couplers, 76” Tooth Bkt, Tak Controls, Rubber Tracks...............$24,000 21-22 JM Call Steve @ 630-878-8765

2004 Takeuchi TL150, s/n 21500865, 2446 Hrs, ROPS, Rubber Tracks, Tak controls, Faster Hyd Couplers, 80" Tooth Bucket........................$28,900 21-22 JM Call Mike @ 219-712-7700

2006 Case CX240, s/n DAC241862, 1365 Hrs, Boom 19’2”, 11’6” Arm, Shoes 3-Bar Steel 32”, Control Pattern Selector, Coupler ............$135,000 21-22 JM Call Mark @ 630-739-7770

Other Screens Available www.ez-screen.com • 866/745-5828

22 EB

1991 GROVE RT700B, 40 ton rough terrain crane, 110’ main boom, 32’56’ jib, two winches, block, ball, Deutz diesel engine, very good condition, Cleveland, Ohio........ ........................CALL Call Andy at 216-316-1511 21-22 EB

Timber Mud Mats, Hundreds to choose from. Call for Details John Poe at 800-650-7834 jpoe@bolininc.com www.bolininc.com

21-22 JM

2001 Vibrofonceur Vibratory Hammer, Clamping Head & Powerpack, 387 Hrs, Excellent Condition ..........................................................................$60,000 Call Stephen @ 312-617-3114 21-22 AP

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region.

2009 Kawasaki 90ZV Loader, w/550 Hrs on Cummins QSM11 Engine, 75%+Rubber, Like New Call 888-9-RACKERS 21-22 JM Ask for Gary or Matt

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

Atlas Copco ROC F9 Hyd Drill, 5046 Hrs on Cat C9 Engine and 2600 Impact Hrs Call 888-9-RACKERS 21-22 JM Ask for Gary or Matt

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 83

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days ad runs for 2 (two) insertions - no changes in second insertion.

CLASSIFIEDS AERIAL LIFTS Manlifts All Makes & Models

2000 John Deere 330LC, std. boom, aux. hyds., 5617 hours...........................$64,250. 2004 John Deere 450CLC, cab, A/C, QC, 6706 hours. ..................................$139,500.

Rental, Parts, Service, Training Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS Compressors Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

CRAWLER TRACTORS

Call for more details! Murphy Tractor 316-942-1457 www.murphytractor.com 1993 Hitachi EX200LC-2, 9’ arm, 31.5’’ tracks, 52’’ bucket, mech. thumb, good condition, 11,000 hours...............$34,500. 913-371-3822

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 Track Loaders

MISCELLANEOUS

TRAINING

TRENCHER

Backhoe Loaders

Service

Operator Training

Trenchers

2004 New Holland DC95 LGP,

We Service What We Sell! Warranty, Maintenance and More!

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Ditch Witch RT55, s/n 286, great used unit, A523 trenching & #515 backhoe, good condition, 391 hours ....................................$46,500.

canopy, 99HP diesel, 28’’ pads, 10’8’’

6-way

blade,

2250

hours...................$ 36,50 0. Illinois Truck & Equipment 815/941-1483 1998 Case 580SL, cab, A/C, ext-a-hoe, 4x4, aux. hyd., QC, bucket, good condition, 4550 hours...........................$29,500.

Mini Excavators

913-371-3822

2006 Takeuchi TB153 FR, cab, A/C, 36 hp, 16’’ rubber tracks, 12’10’’ dig depth, push blade, 24’’ bucket, 626 hours.......................$42,500.

Skid Steer Loaders 2002

John

Deere

NH Construction Equipment

pads, hyd. tilt, PAT blade, 3698

New & Used Parts & Service

hours...........................$83,950. Call for more details! Murphy Tractor 316-942-1457 www.murphytractor.com NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental

Modern Equipment Sales & Rental 800-445-4381

250

II,

et,

great

condition,

800

Hydraulic Excavators

1996 Mustang 960, T-bar controls, QC and bucket, fair condition,

runs

good,

6000

hours.............................$3,900. Hardings, Inc.

FORESTRY EQUIPMENT Wheel Loaders

New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few .....

Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping Norris Sales Company 610/279-5777

NH Construction Equipment 1996 Caterpillar 320L stroke delimber, 31” pads, Balderson attachment, good condition, 7157 hours ...............$92,000 Five Star Equipment Inc. 607/775-2006

FORKLIFTS Industrial Forklifts Gradall/Lull Sales, Service, Training Modern Equipment Sales & Rental 800/445-4381

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

New & Used Parts & Service Modern Equipment Sales & Rental

track, aux. hyds., turbo, 1603 hours...........................$26,750. Call for more details! Murphy Tractor 316-942-1457 www.murphytractor.com

Would you like

YOUR COMPANY

featured in Construction Equipment Guide? If so, please contact us:

470 Maryland Drive, Fort Washington, PA 19034

Get an edge on your competition! construction equipment guide Midwest edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. call toll free! We now accept visa, Mastercard & american express!

SUBSCRIPTIONS:

One Year $65

(within United States & Puerto Rico Only)

cardMeMber’S naMe _________________________________________________________ Daily - Weekly - Monthly Competitive Rates

cOMpanY naMe _______________________________________________________________

Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

citY ______________________________________State _______ zip ________________

800-445-4381

Track Loaders

501-316-3200

Subscribe to CEG today...

www.norrissales.com

Logging Equipment

2006 John Deere CT322, 12’’ NH Construction Equipment

Rental

Norris Sales Company 610/279-5777

913-371-3822

219-696-8842

800-445-4381

EXCAVATORS

RENTALS

OROPS, counter weight, buck-

Illinois Truck & Equipment 815/941-1900

2005 John Deere 750J, 18’’

Norris Sales Company 610/279-5777

Construction & Equpment & Supplies for the “Professionals”

hours..................................Call

Crawler Tractor

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors

Street____________________________________ phOne nO. ________________________

tYpe Of buSineSS _____________________________________________________________

check enclosed

Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381

viSa

MaStercard

american express

card nuMber

exp. date (Mo./Yr.) Signature Of authOrized cardhOlder

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland dr. • ft. Washington, pa 19034 email: circulation@cegltd.com

Page 84 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2003 DOOSAN MEGA 200-V ...............$67,500 Call Kirk Nelson at 785-823-6378 www.sellersequipment.com

2006 JCB 3CX Side Shift.....................$54,500 Call Kirk Nelson at 785-823-6378 www.sellersequipment.com 21-22 JM

21-22 JM

ASPHALT CUTTERS EXTREME SERVICE, Large Overseas Order 10 Extra Units, Retails $3,100

Blowout Special: $2,000 Call Dawn or Gerry at 218-863-6444 22-23 AP

Next Issue Closes November 4th

EMPLOYMENT OPPORTUNITY Waste Management Debuts Dumpster Towmaster, a well-established, high quality construction trailer manufacturer, is seeking a Regional Sales Manager for Texas and the surrounding states. This individual will service an established dealer network and solicit new dealerships where needed. Applicants must have outside sales experience, minimum two-year degree and be willing to travel extensively. The position calls for strong communication skills, technical selling abilities, mechanical aptitude and proficiency in Microsoft Office applications. Experience in construction trailers is a plus. Towmaster is an employee-owned company that offers a comprehensive benefit package including a compensation plan with commission incentives. If you are interested in joining a progressive company with unlimited growth potential, please send your resume to Lori Nelson at lori@towmaster.com. Towmaster is an Equal Opportunity Employer

in a Bag; Can Hold Up to 3,300 Lbs. Bagster — a dumpster in a bag — is a woven bag designed for disposing as much as 3,300 lbs. of debris. It is large enough to hold full sheets of plywood, doors and even a bathtub, according to Waste Management. The bag, which is sold in home improvement stores, holds 3 cu. yds. (2.3 cu m) of debris and is 8 ft. long by 4 ft. wide by 2.6 ft. tall (2.4 by 1.2 by .8 m). The Bagster bag is useful for remodeling projects, home and garage cleanups, community clean-up projects and moving preparation, according to Waste Management. For more information, call The bag, which is sold in home improvement stores, holds 3 cu. yds. (2.3 cu m) of 877/789-2247 or visit debris and is 8 ft. long by 4 ft. wide by 2.6 ft. tall (2.4 by 1.2 by .8 m). www.thebagster.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 85

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. LOOKING FOR HITACHI EXCAVATORS EX 2001 AND EX 3001 CONTACT: KHAN PHONE: +92-333-5555-360 EMAIL: IUK.IUKCO@GMAIL.COM –––––––––––––––––––––––––––––––– HYUNDAI | 2006 0R NEWER HYUNDAI 360 EXCAVATOR. LONG STICK PREFERED BUT NOT REQUIRED, E-MAIL PICTURES AND HOURS WITH PRICE CONTACT: BEAUFORD MULLINS PHONE: 260 497 0500 FAX: 260 490 8217 EMAIL: BEAUFORD@KORTEBROS.COM –––––––––––––––––––––––––––––––– PICK UP TRUCK TO USED CNG FUIL | I NEED SMALL PICK UP TRUCK FOR NATURAL GAS OR CNG . CONTACT: LOUIS CARMONA PHONE: 917 517 1117 FAX: 917 517 1117 EMAIL: VANCASACXA@AOL.COM –––––––––––––––––––––––––––––––– AERIAL LIFT PLATFORM CONTACT: RAI PHONE: 00 33 614 287 264 EMAIL: RAIH@FREE.FR –––––––––––––––––––––––––––––––– BOBCAT BRAND SKID STEER LOADERS AND MINI EXCAVATORS **WANTED** CONTRACTORS ONLY PLEASE NO DEALERS CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– WANTED AUGER TRUCKS | TRUCKS WITH AUGER FOR TELEPHONE POLES. CONTACT: JAMES BOEVE PHONE: 616-218-7200 EMAIL: DOZERS@JWBIRON.COM –––––––––––––––––––––––––––––––– KOMATSU D41A3 | I NEED A TRANSMISSION FOR MY DOZER CONTACT: RAY HOPSON PHONE: 865-567-1743 FAX: 865-992-3351 EMAIL: GOOBSGIRL@COMCAST.NET –––––––––––––––––––––––––––––––– USED CONSTRUCTION MACHINES | LOOKING FOR CATERPILLAR WHEEL LOADERS, DYNAPAC ROAD ROLLERS, HITACHI EXCAVATORS CHECK IT OUT HTTP://ABOUT.ME/IUKCO CONTACT: MR IKRAM ULLAH KHAN PHONE: +923002831078 EMAIL: INFO@IUKCO.COM –––––––––––––––––––––––––––––––– JACKHAMMERS | LOOKING FOR USED OR OBSOLETE AIR TOOLS. JACKHAMMERS/PAVEMENT BREAKERS/ROCKDRILS/IMPACT WRENCHES CONTACT: JOSEPH M EMAIL: JCMSTRAUSS@OPTONLINE.NET –––––––––––––––––––––––––––––––– CATERPILLAR 815F COMPACTOR NEEDED | WE HAVE A PROVEN CUSTOMER WHO IS INTERESTED IN AN OLDER CAT 815F COMPACTOR WITH S/N PREFIX 1GN. DOES NOT NEED TO BE CAB AND AIR, A CANOPY MACHINE IS ACCEPTABLE. IT DOES NEED TO BE GOOD ORIGINAL PAINT, GOOD CONDITION WITH GOOD FEET. LOCATED IN SOUTHEASTERN U.S. WOULD BE PREFERED. PLEASE NO CONVERSIONS. CONTACT: WENDELL CAIN PHONE: 770-381-8984 FAX: 770-381-6977 EMAIL: WENDELL@CAINANDTODD.COM ––––––––––––––––––––––––––––––––

ASTEC TRENCHER | TRENCHER ATT. FOR ASTEC 660 TRENCHER 5FT BOOM CONTACT: JIM BUTTERS PHONE: 970-481-5648 FAX: 970-568-0278 EMAIL: AMERICANTEC1@AOL.COM –––––––––––––––––––––––––––––––– CATERPILLAR 936E, 930, 950E, 950B ABOVE 80 MODELS | WE ARE LOOKING FOR HEAVY CONSTRUCTION MACHINES LIKE WHEEL LOADERS, ROLLERS, MOTOR GRADERS, EXCAVATORS, BULLDOZERS, ETC. SEND US PHOTO, SERIAL NO, ENGINE CONDITION, MACHINE’S CONDITION AND LAST PRICE FOB. CHECK OUT MY WANTED LIST HTTP://ABOUT.ME/IUKCO CONTACT: MR KHAN PHONE: +92333-55-55-360 EMAIL: IUK.IUKCO@GMAIL.COM –––––––––––––––––––––––––––––––– CASE/CAT BACKHOE LOADER | 2 WHEEL DRIVE OR 4 WHEEL DRIVE, 580 E, K, SK, SL, OR SM. REASONABLE PRICES, CASH PAID CONTACT: FRANK PHONE: 973-650-9268 EMAIL: ZACC1@OPTONLINE.NET –––––––––––––––––––––––––––––––– COOLCAT 5600 CONTACT: SHAWN LEHMAN PHONE: 585-808-0043 FAX: 585-593-5383 EMAIL: LEHMANSLC@HOTMAIL.COM –––––––––––––––––––––––––––––––– CAT D6 | WE ARE LOOKING FOR CONTRACTOR OWNED CAT D6R LGP/D6T LGP/D6R XL/D6T XL WITH PAT BLADE. NJ, PA, DE, NY AREA. JNEVINS@JUDECONSTRUCTION.COM CONTACT: JOHN NEVINS EMAIL: JNEVINS720@AOL.COM –––––––––––––––––––––––––––––––– INTEGRATED TOOL CARRIER CONTACT: DAVID JONES PHONE: 61892505550 FAX: 61892506650 EMAIL: DAVID@SWANTRAX.COM –––––––––––––––––––––––––––––––– WANTED 14G CAT MOTOR GRADER | WE WANT TO BUY USED CAT 14G MOTOR GRADER, YEAR MODEL 19761995. OFFER US YOUR EQUIPMENT WITH PICTURES, SERIAL NUMBERS, YEAR MODEL, MACHINE CONDITION AND LAST OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: AIMN@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– D7G D8H D8K D9 155 355 375 WITH RIPPER ONLY CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 | LATE MODEL LOW HOURS CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET ––––––––––––––––––––––––––––––––

BOBCAT BRAND SKID STEER LOADERS AND MINI EXCAVATORS. WE ARE ALWAYS BUYING. **NO DEALERS PLEASE** CONTACT: WARREN OR MAUREEN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– BIDWELL WORK BRIDGE - MOTORIZED WITH A 40 MINIMUM SPAN CONTACT: BILL BEDFORD PHONE: 563-468-1343 FAX: 877-348-4776 EMAIL: BW_BEDFORD@MCCARTHYIMPROVEMENT.COM –––––––––––––––––––––––––––––––– LOOKING FOR A HIGHRAIL BUCKET TRUCK FOR OCS WORK IN SACRAMENTO. CONTACT: HERB HOLDER PHONE: 650-333-2329 FAX: 916-929-5407 EMAIL: HERBNIZZLE@YAHOO.COM –––––––––––––––––––––––––––––––– 45 TO 50 KW GENERATOR CONTACT: JIM EMAIL: JIMFRANKEN@NEWMEXICO.COM –––––––––––––––––––––––––––––––– WE ARE LOOKING FOR CATERPILLAR WHEEL LOADERS 916, 950, 950B, 950E, 966F & HITACHI EXCAVATOR EX200-1, PLEASE LET US OFFER IF AVAILABLE FOR SALE & SEND US DETAILS, PICTURES. CONTACT: NAQIB KHAN PHONE: +92-345-8818803 EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR DOZER D9R WITH RIPPER, PLEASE OFFER ME IF AVAILABLE FOR SALES & SEND US DETAILS,PICTURES. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: CAT 988F CAT 988F II PLEASE EMAIL PHOTOS, DETAILS AND WHOLESALE PRICE CONTACT: MATT VANDENBERG PHONE: 602-358-1591 EMAIL: SOMOTRACTOR@COX.NET –––––––––––––––––––––––––––––––– SEEKING A 1998-2002 LINK-BELT LS138H II CRAWLER CRANE IN GOOD CONDITION. SEND EMAIL, DETAILED PHOTOGRAPHS AND SPECIFICATIONS AM ONLY SEEKING CRANES PRICED TO SELL. CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– KOBELCO SK 200 MARK IV CONTACT: FERNANDO CAMARGO PHONE: 1-845-721-01-38 EMAIL: MICHAEL.CAMARGO@RAVE.COM.CO –––––––––––––––––––––––––––––––– INTERNATIONAL TD15 DOZER | 1988 UP, CAB OR OPEN, GOOD CONDITION WORK READY. NEED A.S.A.P. CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET ––––––––––––––––––––––––––––––––

WE WANT TO BUY USED CAT 140G MOTOR GRADER, YEAR MODEL 1985-1995. OFFER US WITH PICTURES, SERIAL NUMBERS, YEAR MODEL, MACHINE CONDITION AND LAST OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– USED HEAVY TRUCK, TRAILER & MACHINERY EQUIPMENT | LATE MODEL ASPHALT PAVER EQUIPMENT, WIRTGEN, CAT, KOMATSU DOZERS, ALUMINUM DUMP TRAILERS, FRAMELESS 35 - 39 AND DETACHABLE TRAILERS CONTACT: JAMES BOEVE PHONE: 616-218-7200 EMAIL: DOZERS@JWBIRON.COM –––––––––––––––––––––––––––––––– WANTED 14G CAT MOTOR GRADER | WE WANT TO BUY USED CAT 14G MOTOR GRADER, YEAR MODEL 19761995. OFFER US WITH PICTURES, SERIAL NUMBERS, YEAR MODEL, MACHINE CONDITION AND LAST OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– A30D | LOOKING FOR 3 LATE MODEL, LOW HOUR TRUCKS EQUIPPED WITH TAILGATES. CONTACT: DAVID MULLINS PHONE: (276) 870-0005 FAX: (606) 644-0477 EMAIL: DMULLINS@VERIZON.NET –––––––––––––––––––––––––––––––– MKT VIBRATORY PILE HAMMERS | I AM SEEKING TO PURCHASE MKT VIBRATORY PILE HAMMERS LOCATED IN THE USA. FORWARD PHOTOGRAPHS AND MODEL/YEAR INFORMATION TO MY EMAIL ADDRESS. I AM SEEKING USED CONTRACTOR OWNED VIBROS PRICED WHOLESALE. PROMPT PAYMENT AND EQUIPMENT PICKUP ASSURED. EMAIL ME IF YOU HAVE USED MKT V20B OR V35 MODEL VIBROS FOR SALE. CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– USED TRACKS | LOOKING TO BUY USED SET OF TRACKS W/PADS FOR A CASE 850D CONTACT: JAMES HOPKINS PHONE: 559 676 2845 EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– KOMATSU BR580 JG1 TRACK JAW CRUSHER | LATE MODEL LOW HOUR WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– LANDOLL TRAILER | 50 51 OR 53 FOOT AIR RIDE 35,40,50,55 TON USED FOR EXPORT CONTACT: PATRICK SEMENUK PHONE: 813-985-8546 EXT # 204 FAX: 813-989-2554 EMAIL: LANDOLLTRAILER@AOL.COM ––––––––––––––––––––––––––––––––

CAT BULLDOZERS | CAT D10T BULLDOZERS, UNDER 3,000 HOURS. MUST HAVE RIPPERS. CONTACT: EQUIPMENT MANAGER PHONE: 914-693-0300 EMAIL: ITC@BESTWEB.NET –––––––––––––––––––––––––––––––– BULLDOZER D7G WITH RIPPER ONLY USER I NEED 3 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CASE 580SM | 580SM UNDER 3500 HRS. 4X4, EROPS, EXT, CLOSE TO PHILA, PA. CONTACT: JOHN NEVINS PHONE: 215-254-0120 EMAIL: JNEVINS720@AOL.COM –––––––––––––––––––––––––––––––– BOBCAT EQUIPMENT | BOBCAT BRAND EQUIPMENT **WANTED** INSTANT CASH PAID. NO DEALERS PLEASE CONTACT: WARREN PHONE: 239-682-4141 EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– LULL 844 OR 1044 FROM CONTRACTOR WHOLESALE PRICE CONTACT: BRIAN PHONE: 856-207-5340 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– CAB FOR KAWASAKI 70Z LOADER | COMPLETE CAB IS NEEDED CONTACT: JENNIFER PHONE: 435-744-5580 FAX: 435-744-5586 EMAIL: JENNIFERL@ALLIEDCON.COM –––––––––––––––––––––––––––––––– CAT 951B UNDERCARRIGE PARTS CHEAP OF USED CONTACT: KEVIN PHONE: 856-297-4758 EMAIL: KEVIN@ SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– (2) CAT 627GS, UNDER 5,000 HRS, PREFER NE US • PREFER EROPS W/ A/C BUT NOT NECESSARY. CONTACT: JOHN NEVINS EMAIL: JNEVINS720@AOL.COM –––––––––––––––––––––––––––––––– BULLDOZER 550G LT Â«CASEÂ« LOW HOURS AND D4G LT CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– 12G,1990 1992, HM4001, 2001 2002, PC SERIES EXCAVATORS • WE ARE LOOKING FOR THE FOLLOWING EQUIPMENT. IF YOU HAVE ANY UNIT IN YOUR STOCK, PLEASE SEND DETAILS & PICTURES ALONG WITH YOUR BEST PRICE. USA DEALERS ONLY. THANKS CONTACT: MARK EMAIL: AAMARK.SALE@GMAIL.COM –––––––––––––––––––––––––––––––– PC350 • WANT YEAR 2000~2002 CONTACT: ALAM PHONE: +971555999819 FAX: +97165433292 EMAIL: TM_TRD@YAHOO.COM ––––––––––––––––––––––––––––––––

LATE MODEL F550 SERVICE TRUCK WITH CRANE, WELDER, AIR COMPRESSOR CONTACT: NICK PHONE: 203-535-9824 EMAIL: NBD.NICK@GMAIL.COM –––––––––––––––––––––––––––––––– BULLDOZER D7G AND D8K FROM USER ONLY STATES CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– 532DX CONTACT: DAPHNIE EMAIL: DAPHNIE.RIVERA@YAHOO.COM –––––––––––––––––––––––––––––––– CAT 416C BACKHOE LOADER CONTACT: MARK SNOW PHONE: 336-215-5388 FAX: 336-215-5388 EMAIL: MSNOW@CAROLINACAT.COM –––––––––––––––––––––––––––––––– CAT 815F | WE ARE LOOKING FOR 1 OR 2 CAT 815F COMPACTORS WITH 1500 TO 8000 HOURS, EROPS, AC. CONTACT: MARCEL EQUIPMENT LTD PHONE: 519-686-1123 FAX: 519-686-9350 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW CRUSHER | LATE MODEL LOW HOUR CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– HITACHI EXCAVATOR EX200, EX200LC, UH083 | PLEASE LET ME KNOW IF YOU HAVE AVAILABLE OR UP COMING UNIT. CONTACT: HIDAYAT KHAN PHONE: +92-345-8818803 EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC ROLLER CA251 & CATERPILLAR WHEEL LOADERS 950B, 950E, 966F | LET ME KNOW IF YOU HAVE AVAILABLE OR UPCOMING UNIT. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– 66" SMOOTH DRUM FOR AN INGERSOLL RAND SD70F CONTACT: WENDELL CAIN PHONE: 770-381-8984 FAX: 770-381-6977 EMAIL: WENDELL@CAINANDTODD.COM –––––––––––––––––––––––––––––––– DUMPER | WE WANT TO BUY A KOMATSU CD110 RUBBER TRACK DUMP. CONTACT: LARRY LEISTIKOW PHONE: 608-655-1300 FAX: 608-655-1399 EMAIL: LARRY@BADGERMACHINERY.NET –––––––––––––––––––––––––––––––– ALUMINUM PANELS FOR CONCRETE CONTACT: LUIS CARMONA PHONE: 917 517 1117 EMAIL: VANCASACXA@AOL.COM ––––––––––––––––––––––––––––––––

Page 86 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contractors Face Pressure of Securing a Stable Product FLOODING from page 1

The low, flat terrain around Devils Lake consists of various coulees, channels and basins, which may be separated during times of low water, or connected during high water. Thus the boundaries of the lake can vary greatly from year to year, depending on the amount of precipitation. Above average rains and snowfalls during the mid 1990s caused Devils Lake water levels to rise rapidly. In spring and summer 2009, the lake rose nearly 4 ft. (1.2 m) The lake elevation has continued to rise each year, creating an overall 26-ft. (7.9 m) increase in 13 years, claiming another 81,000 acres of adjacent, privately owned land. The lake now covers about 125,000 acres, according to information from the Devils Lake Area Chamber of Commerce. In late June 2010, the lake crested at a new record high elevation just above 1,452 ft. (442.5 m) above sea level, with the top of the 8-mi. embankment protecting Devils Lake at 1,460 ft. (445 m), a level that was completed in December of 2005. Then in the spring of 2011 the lake rose about 3 ft. (0.9 m) to its current elevation of 1,454 ft. (443.1 m), according to information from the Devils Lake Area Chamber of Commerce. Traditionally, the top 6 ft. (1.8 m) of level elevation serves as freeboard or a safety factor to prevent waves or ice from splashing over it, explained Bonnie Greenleaf, project manager with the U.S. Army Corps of Engineers in St. Paul, Minn. The height required for the maximum pool elevation of 1,458 ft. (444.3 m) (where flows would begin out of the natural outlet at Tolna Coulee) is 1466 ft. (446.8 m) to meet dam safety standards. So, to meet those standards, the embankment is being lengthened from 8 mi. long to over 12 mi. (3.7 m), extending the embankment to high ground, and increasing its height to 1,466 ft. above sea level. The initial levees were constructed in the 1980s to an elevation of 1,445 ft. (440.4 m) above sea level. In 1996 the dikes were raised an additional 5 ft. (1.5 m) and in 1997 they were raised again, this time to 1,457 ft (444 m) to provide protection for a lake level of 1,451 ft. (442.2 m), according to information from the U.S. Army Corps of Engineers. The lake began outletting into nearby Stump Lake at 1,446 ft. (440.7 m) This rise in water level has caused flooding to property and communities as well as transportation systems throughout the area. Water levels in Devils and Stump lakes are expected to continue to rise over the next decade, flooding more property, communities and transportation systems until the water level reaches 1,458 ft. (444.3 m), at which time the water begins to flow into the Sheyenne River via the Tolna Coulee, causing additional flooding issues for communities along the Sheyenne, according to information from the Devils Lake Area Chamber of Commerce. To help combat the water, some roads are

functioning as dams, protecting interior roads, property and homes, even though the roads were not designed or constructed to act as dams. Corrective measures have been identified to reinforce these roads so that they function safely and meet dam safety standards, according to information from the U.S. Army Corps of Engineers. About 7 mi. (11.3 km) of highways 20 and 57 are being raised. This phase of construction will cost about $150 million, which is shared 75/25 by the federal government and the city of Devils Lake. The embankment construction work is being phased so that an acceptable level of protection will be in place prior to the spring runoff of 2012. Embankments are being raised in four phases to reach 1,466 ft. Phase 1 was awarded in October of 2009; construction of a pump station head well is nearing completion. Phase 2 was split into two contracts to allow for additional time to address geotechnical challenges. Phase 2a was awarded in November 2010 and will be completed in November 2011, which includes raising and lengthening the embankment, which is currently about half complete. The Federal Highway Administration and the Bureau of Indian Affairs are the lead agencies on this project, with technical support provided by the Corps of Engineers. Many of the roads are located within the Spirit Lake Indian Reservation. Phase 3 was awarded in April 2011; Phase 2b was awarded in May 2011. All phases are scheduled to be completed by November 2012. Constructing the various embankment elevations has required tremendous amounts of materials. When creating the 1,457 ft. height in 1997, 1.8 million cu. yds. (1,376,199 cu m) was needed; and, to create the 1,460 ft. (445 m) height in 2005, about 160,000 cu. yds. (122,329 cu m) was required. Lengthening the current 8 mi. embankment by 4 mi. (6.4 km) and increasing its height 6 ft. (1.8 m) requires about 2.6 million cu. yds. (1,987,843 cu m) of materials, including riprap, impervious fill, sand drain, bedding and top soil. The embankment is being constructed to a width of 20 ft. (6.1 m) Some new techniques to construct the levee, due to Hurricane Katrina, have been incorporated such as creating a vegetativefree zone of 50 ft. (15.2 m), which can have nothing in it except turf, making it necessary to move utilities, Greenleaf said. In some areas the levees are being tied into the high ground. “That is something that is stricter then in the past because since Katrina there is a lot of concern about levee standards,” she added. A few challenges presented themselves over the last few years because the lake level is rising so quickly, creating the need for an aggressive schedule and a more technical design, Greenleaf said. “We had to scramble and a lot of analysis

had to go into this because technically this is a dam. Soil borings were taken and testing was done and we discovered that the materials were worse than we originally thought.” This made it necessary for crews had to construct additional features like slurry trenches, which are created as impermeable groundwater barriers. “Normally, when working on a dam and doing a project on a reservoir the water level is drawn down as much as possible so there is no big head of water on the other side; but, on this project that is not possible, which created a lot of pressure on the other side,” Greenleaf said. Making sure the final product is stable places a lot of pressure on the contractors as to how they build the embankment. Soil is hauled in from various borrow sites, which has been a huge challenge when extending the embankment and when raising the highway heights, Greenleaf said. The City of Devils Lake and the Spirit Lake Tribe has rules in effect on how deep can dig because they don’t want a bunch of holes that lake water could fill later. “It has been difficult to find materials, since we have to be a little more particular in materials use. We want clay for its compaction properties, while sandy materials can be used on the highways. However, there are property owners who are willing to sell soil,” Greenleaf said. Typically, a longer design period and a longer construction period would have been incorporated on a project of this type, but crews are concerned because of how fast the lake has risen in the last few years and how much it will rise over the upcoming winter. “So if contractors don’t have the embankment raised to certain level we have to have temporary measures in place so waves aren’t splashing over embankment. At an elevation of 1,460 feet above sea level we have 6 feet of freeboard so the water is not above 1,454,” Greenleaf said. “It is a few tenths above that now, and if comes up next spring it will cause water to splash over the top. In the spring it looks like ocean waves on the highway and plows are scraping away the logs and rocks. We fortunately didn’t have damage to our rip rap because we use really big rock. We have to protect our embankment and be ready for possible issues.” The water level increases in the spring and peaks during June but the Corps is hoping for a half foot or a foot of evaporation during the summer. Last year they were hoping for that too but it didn’t happen. The water level held to within a few tenths of where it had been. That level is holding steady between the evaporation and the excessive rains this summer. Crews with Ames Construction Inc., of Burnesville, Minn., in conjunction with the North Dakota Department of Transportation, are working to raise a 7 mi. length of Highways 20 and 57, about 12 mi. south of Devils Lake. Work began in 2010 to raise the various locations along these two high-

ways between 7 and 14 ft. (2.1 and 4.3 m), said Benjamin Lovin, project manager with Ames Construction. Prior to construction, lake water had increased to the point where it was up to the edge of the road, causing vehicle weight limits and speed reductions to 25 mph. As of mid-September, work was about 60 percent complete with a scheduled completion of November. A late spring this year and a wetter than normal summer shortened the work season. “Work on some portions will be a couple of weeks behind schedule, while work on other portions is actually ahead of schedule,” said Greg Semenko, assistant district engineer with the North Dakota Department of Transportation. “The contractors have done an excellent job in trying to meet the schedules, Some of the operations are working 24 hours a day.” Millions of cubic yards of materials are needed to raise the 7-mi. portion of roadway. About 100 side dump and bell dump semis were used to haul in 2.6 million cu. yds. of borrowed embankment materials and another 1.4 million cu. yds. (1,070,379 cu m) of borrowed impervious clay core material. Another 300,000 cu. yds. (229,366 cu m) of waste excavation was removed from the site in order to improve the remaining soil. About 200,000 tons (181,437 t) of aggregate base course was placed, as well as about 130,000 tons (117,934 t) of sand drainage material and about 430,000 tons (390,089 t) of rip rap and bedding stone. All will be topped with about 20,000 tons (18,144 t) of asphalt paving. Twelve Caterpillar model 330 to 375 excavators were used to move the materials, along with eight Caterpillar D5 to D8 dozers, two Caterpillar 627 scrapers, and four Caterpillar 140 motorgraders. Five Dynapac and Caterpillar sheeps-foot and smoothdrum compactors were also needed. Temporary steel sheet piling was set into place with a Manitowoc 10000 100-ton crane with an H & S 4400 vibratory hammer. Numerous large earthwork projects in the Devils Lake are creating congested work conditions and “a shortage of trucks and qualified workers to fill everyone’s needs,” Lovin said. Other projects in the Devils Lake include several locations along Highway 19, which intersects with northern points of Devils Lake such as Six Mile Bay, Mauvis Coulee and Minnew. Flats, Creel Bay Crossing by the Devils Lake airport, US 2 east of Penn, Highway 20 at Spring Lake, the Devils Lake Dike and Grahams Island Road. Once the highways have been raise and the embankment is complete an emergency outlet for Devils Lake will need to be constructed in order to create a permanent solution to the community’s flooding issues. Several locations for an outlet have been proposed but no decision has yet been made. CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 87

B C usiness

Still Time to Register for Workplace Safety Courses! CBI (Center for Business & Industry), a Division of South Central College (A Minnesota Community and Technical College) invites you to register for courses in November and December, 2011. The classes include topics on: 10-Hour Construction, November 28 and 29, 2011. This course is set to give attendees the opportunity to receive an OSHA 10 hour card for Construction. Forklift Safety, December 5, 2011. The Forklift Safety course will concentrate on the new safety training requirements for “Powered Industrial Truck Operators,” and the steps required to maintain compliance. Excavation, December 22, 2011. This course will cover OSHA Construction Standard on Excavation (Subpart P). It will also cover soils mechanics and use of soil testing instruments. Online Registration with 24/7 Access – Browse the center for business and industry classes. For registration assistance contact the CBI Registration Office, Monday thru Friday, 7:30 AM to 4:00 PM at 507-389-7203. 2012 FLORIDA Contractor Associations Meetings Postings:

alendar

2012 FTBA Construction Conference to be held March 20 and 21, 2012 - Double Tree Hotel in Orlando, FL. Location: Doubletree by Hilton at the Entrance to Universal Orlando 5780 Major Boulevard, Orlando, FL 32819. For more information please call 407-351-1000. 2012 Annual Asphalt Contractors Association of Florida Convention, June 21 to 23, 2012 at Orlando World Center Marriott, Orlando, FL. 2012 Annual Asphalt Contractors Association of Florida Convention, July 19 to 21, 2012 at UUCF Convention, The Ritz-Carlton Orlando, Grande Lakes, Orlando, FL.

Save the Date: AGC of Minnesota 4th Annual Grading and Base Innovations and Technology Forum The 4th annual AGC-Mn/DOT Grading and Base Innovations and Technology Forum is scheduled for Tuesday, December 1, from 7:30 to 4:30. The Forum will be held at the Sofitel Hotel in Bloomington. Again this year, the Forum will be followed in the evening by AGC’s popular Construction Industry Florida Prestress Concrete Holiday Reception. December 1st Association Winter Meeting, Please save this date and take time February 8 and 9, 2012, Lake to participate in this exciting conference. Mary, FL.

LATE MODEL RENTAL RETURN CONSTRUCTION & AGRICULTURAL EQUIPMENT, SKID STEERS, ATTACHMENTS, SUPPORT & CAMPING TRAILERS. SATURDAY, NOVEMBER 5 @ 9:30 AM COLUMBUS, OHIO (DELAWARE COUNTY FAIRGROUNDS) NOTE: Selling will be a large quantity of both large and small, late model rental fleet equipment in tip top shape – both construction and agricultural. HILITES INCLUDE: 2 UTILITY TRACTORS: Ford 600, David Brown 885, AGRICULTURAL EQUIPMENT: JD 346 Square Baler, 2006 Hesston 745 Round Baler, 2008 NH 488 9ft. Haybine, 2008 Case SBX540 Square Baler, 2008 NH 273 Square Baler, STRAW BLOWERS: Finn B40/W61200, 2 STUMP GRINDERS: (2) Vermeer SC252, ATTACHMENTS: Finn Straw Blowers, (10) Post Hole Augers, Hay Spears. SALE SITE PHONE: (740) 363-6000, 315-559-5900 OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989 online bidding available: www.lyonauction.com

DIRECTIONS: From the North/South: take I-71 to Rte. 36 & US 37 Exit, proceed West on Rtes. 36 & 37 for 9 miles to Delaware. Turn right on Rte. 23 North for 1.2 miles to the sale site. Entrance on left at the Travelodge. From the East/West: Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exit for Rtes. 36 & US 37 and proceed as noted above. NOTE: Auction Entrance is off of Rt. 23. Address: 935 U.S. 23 North Delaware, OH 43015.

ALEX LYON & SON Sales Managers & Auctioneers, Inc. Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com

Page 88 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Jackson, AL Wed., November 2, 2011 For: Late Model Construction, Paving & Support Equipment • Columbus, OH Sat., November 5, 2011 For: Late Model Rental Return Construction Equipment, Attachments, Aerials

• Racine, WI Sat., December 10, 2011 For: Late Model Earthmoving Equipment, Trucks and Trailers • Chicago, IL Tues., December 13, 2011 For: Construction, Aerials, Support, Trucks and Trailers • Lexington, KY Wed., December 14, 2011 For: Construction & Drilling Equipment, Trucks and Trailers

• Detroit, MI Fri., November 11, 2011 For: Construction Equipment, Truck Tractors, Dump Trucks, Trailers & Support Equipment

• St. Louis, IL Thurs., December 15, 2011 For: Late Model Construction Equipment, Attachments, Trucks & Trailers

• Rochester, NY Sun., November 13, 2011 For: Light Construction, Shop & Support Equipment

• Atlantic City, NJ Sat., December 17, 2011 For: Construction Support Equipment, Attachments, Trucks, Trailers and More!

• Houston, TX Tues., November 15, 2011 For: Late Model Construction Equipment, Aerials, Forklifts, Trucks and Trailers • Pell City, AL Wed., November 16, 2011 For: Truck Tractor and Specialized Trailer Auction • Scranton, PA Fri., November 18, 2011 For: Construction Equipment, Support, Trucks and Trailers • Ledyard, CT (Foxwood Casino) Sat., November 19, 2011 For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers • Beaumont, TX Fri.-Sat., December 1-2, 2011 For: Rough Terrain Cranes, Construction Equipment, Trucks, Trailers, Plus Much More! • Atlanta, GA Tues., December 6, 2011 For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers • Dallas, TX Wed., December 7, 2011 For: Late Model Cat, Komatsu, John Deere Equipment, Aerials, Trucks and Trailers • Columbus, OH Fri., December 9, 2011 For: Late Model Truck Tractors, Various Equipment Trailers

• Albany, NY Thurs., December 29, 2011 For: Construction Equipment, Support, Attachments, Trucks and Trailers • Kissimmee, FL Sat.-Sun., Jan 28 – Feb 5, 2012 For: 19th Annual Florida Sale! Rental Returns Construction Equipment, Attachments, Aerials, Support, Trucks and Trailers • Wright City, OK DATE TBA For: Complete Liquidation of One of the Largest Wood Mills in the U.S. RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

Coming Auctions • Lincoln, NE November 18, 2011

• Ocana, Spain December 1-2, 2011

• Las Vegas, NV November 18, 2011

• Polotitlan, Mexico December 2, 2011

• Salt Lake City, UT December 1, 2011

• Caorso, Italy December 6, 2011

• Minneapolis, MN December 2, 2011

• Athens, Greece December 6, 2011

• San Antonio, TX December 2, 2011 • Phoenix, AZ December 5, 2011 • Kansas City, MO December 6, 2011 • Columbus, OH December 6, 2011 • Olympia, WA December 6, 2011 • Albuquerque, NM December 7, 2011 • Atlanta, GA December 7, 2011

• At, Aubin Sur Gaillon, France December 8, 2011

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., November 12, 2011 For: Construction Equipment • San Bernardino, CA Fri., November 18, 2011 For: Construction Equipment

• Hartford, CT December 8, 2011

• Sacramento, CA Sat., December 10, 2011 For: Construction Equipment

CANADA

• San Bernardino, CA Fri., December 16, 2011 For: Construction Equipment

• Grand Prairie, AB November 22-23, 2011 • Saskatoon, SK November 30, 2011 • Montreal, QC December 1-2, 2011 • Toronto, ON December 5-6, 2012

BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY Wed., November 9, 2011 For: Construction Equipment

• Truro, NS December 14, 2011

• Mid-Atlantic, USA November 2, 2011

• ONLINE ONLY Wed., November 23, 2011 For: Construction Equipment

INTER NA TI ONAL

• Detroit, MI November 3, 2011

• Torreon, Mexico November 9, 2011

• ONLINE ONLY Wed., December 14, 2011 For: Construction Equipment

• Las Vegas, NV November 4, 2011

• Rome, Italy November 12, 2011

• Pittsburgh, PA November 8, 2011

• Ipswich, Australia November 17, 2011

• Fort Knox, KY November 10, 2011

• Meppen, Germany November 22, 2011

• Dickinson, ND November 10, 2011

• Brisbane, Australia November 22, 2011

• Clearfield, PA November 15, 2011

• Geelong, Australia November 24, 2011

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087

• Houston, TX November 16-17, 2011

• Moerdijk, Netherlands November 24-25, 2011

• Prospect, CT Sat., December 10, 2011

DEANCO AUCTIONS www.deancoauction.com 601-656-9768 • Philadelphia, MS Wed.-Thurs., Nov. 16-17, 2011 For: Huge 2 Day Contractor’s Auction

GOODRICH AUCTION SERVICE INC. www.goodrichauctionservice.com 607-642-3293 • Johnson City, NY Thurs., November 3, 2011 For: Construction and Industrial Equipment HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Andover, NJ Wed., December 7, 2011 For: Construction and Paving Equipment

IRAY AUCTIONS www.iraymn.com 320-968-7230

JOSEPH FINN CO. AUCTIONEERS & APPRAISERS www.josephfinn.com 617-964-1886 • Circleville, OH Tues., November 8, 2011 For: Onsite and Online Public Equipment Auction KEENAN AUCTION COMPANY www.keenanauction.com 207-885-5100

ROY TIETSWORTH AUCTIONEERS www.tietsworth.com 585-243-1563

• Sarasota, FL Wed.-Thurs., Dec. 9-10, 2011 For: All Assets of Major Rental Center MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Biloxi, MS Thurs., November 3, 2011 For: Multi-Parcel Real Estate Auction

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.c om 860-642-4200

• ONLINE ONLY Wed., December 28, 2011 For: Construction Equipment

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kent, WA Wed.-Thurs., November 2-3, 2011 For: Construction Equipment. Trucks, Wire & Fiber Optic Cable

Coming Auction page Sponsored by Reckart Logistics

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

KOSTER INDUSTRIES www.kosterindustries.com 631-454-1766

IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Thurs., November 17, 2011 For: Construction Equipment

• ONLINE ONLY Tues., November 29, 2011 For: Construction Equipment

• Lebanon, TN Sat., December 10, 2011 For: Construction Equipment

• Foley, MN Fri., December 9, 2011

• ONLINE ONLY Wed., December 21, 2011 For: Construction Equipment

• ONLINE ONLY Thurs., November 17, 2011 For: Construction Equipment

• Windham, ME Thurs., November 10, 2011 For: Construction and Aggregate Equipment, Real Estate

• Brooklyn, MS Fri.-Sat., December 9-10, 2011 For: 2-Dsay Public Construction and Farm Equipment Auction

• Thurs., November 10, 2011 For: Construction Equipment

• ONLINE ONLY Thurs., November 10, 2011 For: Construction Equipment

• Carroll, OH Fri., December 9, 2011 For: New and Used Demolition and Scrap Handling Equipment • North Franklin, CT Fri.-Sat., December 16-17, 2011 For: Major Public Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Wed., November 9, 2011 For: Construction Equipment

• Groveland, NY Sat., December 3, 2011 For: Farm and Construction Equipment, Heavy and Light Trucks RYAN AUCTION SALES www.ryanauctionsales.com 603-491-6159 • Virtual Equipment and Truck Auction Thurs., Nov. 17, 2011-10AM • Virtual Equipment and Truck Auction Thurs., Dec. 15, 2011-10AM STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • Online Auction Opens Nov. 1 – Closes Nov. 10 2011 For: AG, Construction, Trucks, Vehicles & More! • West Fargo, ND Wed., November 30, 2011 For: Construction Equipment, Trucks, Semis and Much More! • Litchfield, MN Thurs., December 22, 2011 For: Construction and Farm Equipment YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Bow, NH Thurs., November 17, 2011 • Kissimmee, FL Mon.-Mon., February 6-13, 2012

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 89

CONTRACTOR’S COMPLETE CLOSE-OUT AUCTION Mike Pusnik Enterprises Saturday, November 5, 2011 – 9:30 A.M. 459 DeBruin Rd. – Combined Locks, WI 54113 • Information: Mike Pusnik 920-460-5852 NOTE: Mike Pusnik Enterprises is discontinuing their construction business and will sell this very well maintained fleet of equipment at auction. Equipment has been well cared for and has been on the job working every day. Running Gear. 72” Skid Loader Rock Bucket. (3) 100 Gal CONSTRUCTION EQUIPMENT: JCB 426 Wheel Loader, C/H, Quad, Air Suspension w/Tarp, 670K Miles, Asphalt Pan, 2200 Hrs, 4WD, SHARP. JCB JS 200L Hydraulic Excavator, Strobes & Beacon, NICE. 89’ IH 9300 Semi Tractor, Tandem, Portable Fuel Tanks for Pick-Up’s. (3) 1000 Gal Fuel Tanks C/A/H, 4836 Hrs, Quick Coupler, w/ 24” 48” & 60” Buckets, 5,000 Miles on OH, New Rubber, Alum Headache Rack, Lights w/Pumps. Harben Trailer Mounted Jetter w/ Diesel Engine, Frost Hook, NICE. Kubota KX121-3 Mini Excavator, C/A/H, & Beacon, GOOD. 93’ Ford L-9000 S/A Day Cab Truck Tractor, NEEDS WORK. Monroe Truck Mounted 1½ yard Stainless 1221 Hrs, Quick Coupler, Thumb, w/ 24” 36” Buckets & KB 8 Spd, D, Pintle Hitch, CLEAN. 84’ Ford F-800 S/A Dump Steel Salter w/ B&S 11hp Motor. Geine Personal Man Lift. 500 Hydraulic Breaker, CLEAN. Case 550 E Crawler Dozer, Truck, Detroit V-8 Diesel, 5&2 Trans, 5 yrd Box, Pintle Hitch. Scoot Crete T-70 Cement Buggy. (2) Pickup Tool Boxes. Rops, w/ 6 Way Blade, 3212 Hrs. Case 455C Crawler Loader, Walco Truck Mounted 1½ yard Stainless Steel Salter w/ Rops, 500 Hrs, New Motor in 2005. JD 455E Crawler Loader, AERIAL BUCKET TRUCK: 95’ GMC Top Kick Utility Bucket Electric Motor. MBW Foot Tamper. 1600 Gal Water Tank on Truck, Cat 3116 Diesel, Auto Trans, w/ Al-Tec AM450-MH 48’ O-Rops, D, Winch, GOOD U/C. Case W11 B Wheel Loader, Skids. Hydratek Hot Pressure Washer. Assorted Truck Tires Over Center Bucket, Low Miles, CLEAN. C/H, 4WD, Low Hours, CLEAN. Case 580K Tractor Loader, w/ Mounted on Budd & Dayton Rims. Assorted Shop Tools. Sims Cab, Heat, 96” Snow Bucket, New Torc Convertor in Assorted Building & Plumbing Supplies. Assorted Chains & (NOTE: ALL OF THESE TRUCKS HAVE BEEN THROUGH THE 2009. ASV RC60 Track Skid Steer, C/H, Quick Coupler, 500 Binders. SHOP, WELL MAINTAINED, & READY TO WORK.) Hrs, LIKE NEW. 09 Cat 252B Series II Skid Steer, C/H, 1000 Hrs, NICE. JD 480 Forklift, 21’ Mast, Gas, 2WD, Rops, 4000 LANDSCAPE EQUIPMENT: Brillion SMT-8 Straw Crimper, 3pt PICK-UP TRUCKS: 01’ Dodge 2500 Pickup, V-8 Gas, Auto Lb cap. AC40 Forklift, LPG, Rops, PS, Pneumatic Tires, 3 or Skid Loader Mount, SHARP. Goossen 3pt PTO Bale Trans, 4X4, w/ 8’ Myers Commercial Plow, Extended Cab, Stage Mast, 4000 Lbs. Crown Electric Forklift, 1000 Lb cap. Chopper, LIKE NEW. Befco 3pt 50” Rototiller, LIKE NEW. Boss Short Bed, 135K Miles. 01’ Ford F-150 ½ Ton Pickup, Gas, SS 9’ Snow Blade w/ Trip Edge & Hyd Angle. CE-SS 8’ Hyd Auto Trans, 2WD, Extended Cab, Short Bed, 170K Miles. 00’ COMPACT TRACTORS & LAWN & GARDEN & ATV: JD 4720 Angle Snow Blade. Grouser 84” HD Angle Dozer Blade for Compact Tractor, C/H, MFWD, Hydro Trans, w/ JD X400 QT Chevy 3500 Pickup, V-8 Gas, Auto Trans, 4X4, Crew Cab, w/ Skid Steer. McMillan Skid Loader Hyd Post Hole Digger. (2) Loader, 1300 Hrs, SHARP. Kubota B7610 Compact Tractor, Hiniker 8’ Snow Plow, 8’ Bed. 95’ Dodge 2500 Pickup, V-8 Sets of Pallet Forks for Skid Loaders. (6) Assorted Skid Hydro, 313 Hrs w/ Woods LS84 Loader, LIKE NEW. 08’ JD Gas, Auto Trans, 4X4, Regular Cab, 8’ Bed, 90K Miles. 97’ Loader Buckets 60”-84”. Avalanche 14’ Snow Push Box Blade 2305 Compact Tractor, D, Hydro, 60” Deck, 600 Hrs, 4WD, Chevy 3500 Service Truck, Gas, Auto Trans, 2WD, Extended for Wheel Loader. ProTec 8’ Snow Pusher Box Blade, NEW. NICE. JD 4X2 Gator w/ Dump Box. JD 425 Lawn Tractor, 42” Cab, 8’ Service Body. Woods 3pt 5’ Rotary Mower. JD 3pt 72” Grooming Mower. Deck, Cab, Collection System, Snow Blower, Weights & MB 3pt Rotary Broom. MTE 72” 4-In-1 Bucket for Skid Steer, Chains. Kubota T1400 Lawn Tractor, 44” Deck, Hydro. 1964 TRAILERS: 73’ 35T Tri-Axle Low Boy Trailer W/ Ramps, Rear NEW. Grapple Attachment for Skid Steer Bucket. Ryan Walk Load. 11’ MTE 30’ Tandem Dual Trailer, 20,000 Lb Cap, Pintle JD 110 Lawn Tractor (Collector). 50 Gal Lawn Sprayer, PullBehind Aerator. Hitch, LIKE NEW. 02’ Hurst 10T Tag Trailer. 98’ US Cargo 14’ Type w/ B&S Motor. Enclosed Trailer, T/A, Ramp Door. 08’ Load Trail 10,000 Lb FARM EQUIPMENT: Case IH 5500 30’ Folding Grain Drill w/ Tag Trailer, Tandem, Ramps. 08’ Load Trailer 22’ 14,000 Lb DUMP TRUCKS: 98’ Volvo Quad Axle Dump Truck, Cummins 10” Spacing. Case IH 955 12-30RN Folding Planter. M-11 Diesel, 8LL Trans, Quad, w/ Asphalt Pan, Strobes, Tilt Bed Trailer. Allegheny Power Powerable Reel Trailer, S/A, Beacon, Good Rubber, CLEAN. 93’ MACK DM Quad Axle Hyd Reel Tilt. GRAIN HANDLING EQUIPMENT: (4) Elevator Legs, 60’ & 90’. Dump Truck, MACK Diesel, 8LL Trans, Quad, 500K Miles, Ribbon 7 yd Feed Mixer. Hi-Capacity Roller Mill. (2) Gravity Pintle Hitch, Strobes & Beacon, CLEAN. 93’ Ford LTL-9000 MISC EQUIPMENT: NEW Stahl 8’ Service Body for Pickup. (2) Bins on Legs. Assorted Bin Gates. MTE 10’ Contractors Dump Body Boxes for 1T Trucks. JD 965 Quad Axle Dump Truck, Detroit L-Series Diesel, 8LL Trans,

Liebherr’s LRH 100 Offers Flexible Hammer Design The LRH 100 is the smallest representative of the range of piling rigs with fixed and swinging leaders. The LRH 100 has a maximum lifting capacity of 33,069 lb. (15,000 kg) and its fixed leader achieves an effective pile length of 62 ft. 4 in. (19 m). The LRH 100 offers completely new leader kinematics allowing radii of up to 28 ft. 8 in. (8.75 m) and inclinations of maximum 1:3 in all directions. The LRH 100 is equipped with a powerful and emission-optimized 362 hp (270 kW) Liebherr diesel engine and can be transported in one piece with the hammer mounted. Basic machine and leader can be transported in one piece. This allows for quick and easy transportation of the rig as well as flexibility in job site assignment. The heaviest load when basic machine and leader are transported separately is 32.5 ton (29.5 t). The flexible hammer design of the LRH 100 offers the possibility of mounting drop weights between 5,511 lb. (2,499 kg) and

15,432 lb. (7,000 kg). This guarantees optimum adaptation to the required pile type, whether it is a timber pile, concrete pile or a heavy steel pile. This ensures that the performance of the basic machine is ideally converted into high productivity, according to the manufacturer. For more information, visit www.Liebherr.com.

The LRH 100 is equipped with a powerful and emission-optimized 362 hp (270 kW) Liebherr diesel engine and can be transported in one piece with the hammer mounted.

NOTE: ALL GRAIN HANDLING EQUIPMENT NEEDS TO BE REMOVED & DISMANTLED. TERMS TO BE ANNOUNCED DAY OF AUCTION. TERMS: Cash, Check, Credit Cards w/ 4% Convenience Fee. 5.5% Sales Tax will apply to all non Ag related items. Photo ID is required to register. ALL ITEMS TO BE SETTLED DAY OF SALE. PLEASE BRING A CURRENT BANK LETTER OF GUARANTEE. (LOOK ON WEBSITE FOR SAMPLE LETTER)

***THERE WILL BE NO BUYERS PREMIUM.*** Dan S. Powers Powers Auction Service Registered WI Auction Co. #91 W8693 Hale Rd, Browntown, WI 53522. 608-966-3764 or 608-214-3765

For more photos, please visit our website: www.powersauction.com

Page 90 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ONSITE - PUBLIC AUCTION SALE - ONLINE (10) HYDRO-MOBILE M2 PLATFORMS - BRIDGES – TOWERS – M1 PLATFORM LULL LIFTS – DOZERS – SCAFFOLDING - TRUCKS – FORKLIFTS – BOOM LIFT

KENNY HUSTON COMPANY – MASONRY CONTRACTOR 26288 Ohio Route 159, Circleville, Ohio 43113 TUESDAY, NOVEMBER 8th STARTING AT 10:30 A.M.

HYDRO-MOBILE: (10) Hydro-Mobile M2 Mast Climbing Platforms; (13) Hydro-Mobile 18’ Bridges; (9) Hydro-Mobile 10’ Bridges; (98) 5’ Tower Sections; Hydro-Mobile M1 Platform; Dollies; LULL FORKLIFTS: 2006/2003 Lull/JLG 944E-42; (4) Lull 844C-42; (3) Lull 644B-42; SKID STEERS: New Holland LS160; New Holland LX565; Attachments; DOZERS: J. Deere 550 GTC; J. Deere 450E; SCAFFOLDING: (800) 6’6”x5’ Frames; (1800) Braces; (3000) DI-65 10’ & 16’ Planks A 10% Buyer’s Premium ONSITE; A 13% Buyer’s Premium ONLINE. Inspection: Mon., Nov. 7th, 9 A.M.-5 P.M. Joseph Finn Co., Inc., OH Lic. #2008000194 Terms, Photos, Information, Register to bid online at www.josephfinn.com

New Holland Plans on Shifting Focus to Compact Products New Holland Construction announced Sept. 15 that in North America it will refocus on its strengths: the compact product lines for the landscaping, utility, residential construction and agriculture industries, among others. As a result, starting in 2012 New Holland Construction will begin withdrawing from the North American market its crawler dozers, motorgraders, 80 plus horsepower wheel loaders, 6 plus ton excavators and telescopic handlers. New Holland Construction will continue to offer compact products and associated attachments, including skid steer loaders, compact track loaders, tractor loaders, loader backhoes, compact wheel loaders and compact excavators. This announcement only concerns the North American market, as New Holland Construction will continue to sell the heavy equipment product lines in all other world markets. “New Holland Construction’s heritage in North America is a great source of pride and we are pleased with the success of our compact line. We are committed to providing our New Holland Construction customers with the superior equipment performance they expect,” commented Jim Hasler, vice president of CNH Construction, North America. For more information, call 262/636-6011 or visit www.newholland.com.

Safety First...

AGC Plans to Launch New Fall Protection Training Program www.bigiron.com Unreserved Auction ONLINE ONLY Wednesday, November 9, 2011 First Lots Scheduled to Close at 10:00 AM Central Time NO BUYERS PREMIUM FEE and NO RESERVES!! Nebraska Public Power District - Chet Harger - 308-386-5245, Sutherland & York, NE 98 Melroe M-880 Power Module, 2 Cummins N14 Diesel Engines; 97 International 4800 70' Elliott Aerial Truck; 01 Freightliner FL70 Puller Truck ST Excavating Inc - Louis Rankine - 307-431-1912, Thermopolis, WY 97 JD 200 LC Excavator, 8428 Hrs; 93 Kobelco SK 200 Excavator, 9519 Hrs; Cat 420 D Extenda-Hoe, 1679.6 Hrs; Cat 140G Motor Grader, 3929 Eng Hrs; 77 Cat D6D Dozer, 1056 Hrs; 00 Freightliner Conventional Truck; Cat D25C Haul Truck, 8621 Hrs; 98 Trail King 48’ Drop Deck Trailer; 80 Cleme Belly Dump Trailer

Laclede Gas - Mike Mevendez - 314-658-5553, St Louis, MO (2) 00 Freightliner MT45 Service Vans L & B Oil Field Services Inc - Charlie Johnson - 307-660-9407, Gillette, WY Badger 888 Hydroscopic Track Hoe, 449 Hrs 335 Items Selling On This Auction! The next Big Iron auction is on November 23! Sell your equipment on BigIron.com - Call Today- 1-800-937-3558 BigIron.com is a division of Stock Auction Company, 1-800-937-3558

The Associated General Contractors of America will launch a new fall protection safety training program next year due to a new federal safety grant the association is being awarded. The association will use the $130,000 Susan Hardwood Training Grant from the U.S. Department of Labor to tackle one of the most pressing safety issues in construction, officials said. “The new training program will help us continue to make construction safer for millions of workers,” said Stephen E. Sandherr, the association’s chief executive officer. “This is another sign of the commitment our association and our members have to improving construction safety.” Sandherr said that while the overall number of construction fatalities has declined by nearly 50 percent over the past five years, fall-related fatalities remain the single largest cause of construction deaths, Sandherr said. He noted that fatalities from falls accounted for 260 out of the 751 con-

struction fatalities reported in 2010, or nearly 35 percent of the total. The association head noted that the safety program would provide comprehensive information about fall protection for both commercial and residential construction. He added that the association would offer the safety program in eight different sites during 2012 and expected to instruct as many as 500 construction workers during the year. Sandherr added that, in addition to the new fall protection program, the association already offers a host of safety programs and materials that construction firms are taking advantage of. These include in-seat safety training programs and making educational materials available to construction firms. “Any chance we get to improve safety for construction workers we are going to take,” Sandherr said. “After all, the construction industry is only as strong as its workers are safe.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 91

Online Auction Thursday, November 10 Featuring equipment from:

Link Belt LS418A Lattice Boom Crawler Crane

2006 Caterpillar 631G Motor Scrapers (2)

Caterpillar 345BL Track Excavators (6)

Caterpillar 623F Elevating Motor Scrapers (4)

Caterpillar 627F Motor Scrapers (4)

Caterpillar 631E Motor Scrapers (13)

Caterpillar D9N Crawler Tractor

Caterpillar D10N Crawler Tractors (2)

E-Ject E-45 Ejector Trailers (6)

E-Ject SC-17-U Pull Scrapers (19)

Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids. Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Page 92 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kentucky Exposition Center Plays Host to 2011 ICUEE from ICUEE page 70

Coleen Naylor and John Kane of J.J. Kane Auctioneers are having a great time talking to attendees about turning used iron into cash.

Efficiency Production’s Gary Stephens is ready to speak with attendees about trench safety.

Tim Keane (L) of Ditch Witch of Ohio, Western PA and Western NY catches up with Brad Dudash of Jess Howard Electric Co.

(L-R): Patrick Jennissen, Gary Knudsen, Roger Magers, Daniel “Boone” Larsen and Mike Flynn man the Felling Trailer booth.

IMT Director of Market Development John Cheshier (L) helps IMT Product Manager Tim Workman with the Dom 2, a 10,000-lb. crane.

Mississippi Valley Equipment Company’s John Henry (L) and Karl Bogle are eager to answer questions about pile driving and drilling equipment.

Hammer Head Trenchless Equipment Regional Sales Manager Mark McMillion demonstrates his company’s 2.5 in. Catamount piercing tool

Darrin Harn of ALLU demonstrates the new D-series 3-yard soil screener.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 93

Bank On It...

SANY America Chooses GE Capital for Financing Solutions SANY America has established a program with GE Capital to expand wholesale and retail financing solutions for distributors and their end user clients. The news comes as the U.S. based subsidiary of Chinese heavy equipment manufacturer SANY Heavy Industry continues to grow its production and distribution base in North America. “Our company has outlined very aggressive growth strategies in the North American heavy equipment markets,” said SANY America Finance Manager Scott Morrish. “As we accelerate the expansion of our dealer networks, our partnership with GE Capital will afford our customers a wide variety of financing solutions,” he added. The announcement comes only months after SANY Heavy Industry joined the Financial Times Global 500 List, an annual ranking of the world’s strongest firms by market capitalization. SANY Heavy

Industry’s financial stability, coupled with the strength and flexibility of GE Capital, will allow dealers and end users to update existing fleets and add new products while maximizing profitability and value. “We are pleased to support SANY’s expansion strategy by offering both attractive inventory financing for SANY dealers and compelling retail financing for enduser commercial customers,” said Kristi Webb, general manager, GE Capital, Dealer Finance. “GE’s deep expertise and broad coverage network in the heavy equipment market makes us uniquely able to assist SANY as they build their U.S. business.” In late August, SANY America moved to its new 400,000 sq. ft. corporate headquarters in Peachtree City, Ga. The facility features 60,000 sq. ft. of office space and 340,000 sq. ft. of manufacturing area, where the company will assemble its line of crawler cranes, hydraulic excavators and concrete pump trucks.

Page 94 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX AIM ATTACHMENTS ....................................................................30 ALEX LYON & SONS AUCTIONEERS COLUMBUS OH 11/5 .............................................................87 ALEX PARIS CONTRACTING CO INC .........................................9 ALTORFER CAT ...........................................................................35 AMERICAN STATE EQUIPMENT ................................................11 ARING EQUIPMENT CO INC ......................................................21 ARTIC SNOW & ICE CONTROL .................................................39 ASPEN EQUIPMENT ...................................................................45 AVALANCHE ................................................................................41 BARGAINS ....................................................................................82 BAY-LYNX MANUFACTURING INC .............................................40 BIG IRON .....................................................................................90 BODINE MFG ...............................................................................30 BOMAG AMERICA’S INC ............................................................73 BOSS PRODUCTS ......................................................................40 BRANDEIS ...................................................................................10 CASE CONSTRUCTION .........................................................46,47 CEG SCALE MODELS ................................................................26 CK POWER ..................................................................................35 CLASSIFIEDS ...............................................................................83 COMPANY WRENCH ..................................................................18 CONSTRUCTION EQUIPMENT GUIDE ............................33,58,69 CUSTOM MADE PRODUCTS .....................................................18 DYNAPAC ....................................................................................77 E TIP INC .....................................................................................30 EAGER BEAVER TRAILERS .......................................................17 ERB EQUIPMENT ........................................................................49 ESSEX CONTRACTING ..............................................................10 FABCO EQUIPMENT INC .............................................................7 FABICK CAT ............................................................................15,48 FINKBINER EQUIPMENT CO ......................................................11 FLANGE LOCK ............................................................................10 FURY MOTORS ...........................................................................28 GEHL ............................................................................................66 GEITH ..........................................................................................32 GOMACO CORP ..........................................................................79 HITACHI MFG ..............................................................................62 HOWELL TRACTOR & EQUIPMENT CO ...............................57,96 HYUNDAI CONSTRUCTION EQUIPMENT .................................59 ILLINOIS TRUCK & EQUIPMENT .................................................3 IRON PLANET ONLINE AUCTION 11/10/11 ...................................................91 JCB INC .......................................................................................43 JFW EQUIPMENT INC ................................................................74 JJ SCHECKEL CORP ..................................................................28 JOHN DEERE ..............................................................................53 JOHN DEERE SKID STEER ........................................................67

JOSEPH FINN CO INC CIRCLEVILLE OH 11/08/11 ....................................................90 KOBELCO ...............................................................................24,25 KOMATSU AMERICA CORP ..................................................18,19 KOMATSU CO-OP ...................................................................54,55 KUBOTA SVL ...............................................................................60 LBX ...............................................................................................68 LEEBOY .......................................................................................81 MAULDIN PAVING PRODUCTS ..................................................75 MCCANN INDUSTRIES INC .........................................................6 NATIONAL TRACTOR PARTS .....................................................57 NORTRAX-MIDWEST ..................................................................13 NPK CONSTRUCTION EQUIPMENT INC ..................................27 NUSS GROUP .............................................................................29 PATTEN TRACTOR & EQUIPMENT CO .......................................2 POWERS AUCTION SERVICE COMBINED LOCKS WI 11/05/11 ...........................................89 POWERSCREEN MW DEALER ..................................................23 PRO-TEC EQUIPMENT ...............................................................25 PRO-TECH ...................................................................................42 PURPLE WAVE INC INTERNET AUCTION 11/17 ..................................................93 RDO EQUIPMENT ........................................................................31 RECKART LOGISTICS INC .........................................................88 RITCHASON AUCTIONEERS LEBANON TN 12/10/11 ..........................................................93 RITCHIE BROS AUCTIONEERS AUCTION CALENDAR ...........................................................95 ROAD BUILDERS MACHINERY & SUPPLY .............................6,20 ROLAND MACHINERY INC ...........................................................5 ROSCO MFG CO .........................................................................78 S R INDUSTRIES ........................................................................54 SNOW WOLF ...............................................................................42 SOUTHEASTERN EQUIPMENT CO ...........................................14 STAR EQUIPMENT LTD ................................................................6 SUBURBAN CHEVROLET ..........................................................16 TAKEUCHI ...................................................................................61 TOWMASTER INC ......................................................................84 VERMEER SALES & SERVICE ...................................................28 VOLVO COMPACTION ................................................................76 VOLVO CONSTRUCTION EQUIPMENT......................................65 WANTED .......................................................................................85 WEST SIDE TRACTOR SALES ..............................................25,74 WIRTGEN AMERICA ...................................................................80 YANMAR AMERICA .....................................................................63

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 95

AUCTION CALENDAR

38 USA MID-ATLANTIC DETROIT, MI PITTSBURGH, PA FORT KNOX, KY DICKINSON, ND CLEARFIELD, PA HOUSTON, TX LINCOLN, NE LAS VEGAS, NV MINNEAPOLIS, MN SAN ANTONIO, TX PHOENIX, AZ KANSAS CITY, MO COLUMBUS, OH OLYMPIA, WA ALBUQUERQUE, NM ATLANTA, GA HARTFORD, CT FORT WORTH, TX DENVER, CO

410.287.4330 248.380.3800 724.947.7240 615.453.4549 507.774.5050 410.287.4330 713.455.5200 816.633.4096 702.644.2468 507.774.5050 713.455.5200 602.269.5631 816.633.4096 937.568.9500 360.956.1500 505.836.0738 770.304.3355 860.684.1055 817.237.6544 970.535.6700

NOV 2 * NOV 3 NOV 8 NOV 10 * NOV 10 NOV 15 NOV 16 & 17 NOV 18 * NOV 18 DEC 2 * DEC 2 DEC 5 DEC 6 DEC 6 DEC 6 DEC 7 DEC 7 DEC 8 DEC 8 & 9 DEC 13

Upcoming Unreserved Public Auctions

CANADA GRANDE PRAIRIE, AB SASKATOON, SK MONTREAL, QC TORONTO, ON CHILLIWACK, BC TRURO, NS INTERNATIONAL TORREON, MEXICO ROME, ITALY IPSWICH, AUSTRALIA MEPPEN, GERMANY BRISBANE, AUSTRALIA GEELONG, AUSTRALIA MOERDIJK, THE NETHERLANDS OCANA, SPAIN POLOTITLAN, MEXICO CAORSO, ITALY ATHENS, GREECE ST. AUBIN SUR GAILLON, FRANCE

780.538.1100 306.933.9333 450.464.2888 1.800.357.0659 604.823.2700 902.895.3700

NOV 22 & 23 * NOV 30 DEC 1 & 2 DEC 5 & 6 DEC 13 DEC 14

+52.871.731.7424 +39.0523.818801 +61.7.3382.4444 +49.5935.70550 +61.7.3382.4444 +61.3.5245.3333 +31.168.392.200 +34.925.157580 +52.427.266.0909 +39.0523.818801 +39.0523.818801 +33.2.32.77.86.10

NOV 9 NOV 12 NOV 17 * NOV 22 NOV 22 NOV 24 NOV 24 & 25 DEC 1 & 2 DEC 2 DEC 6 DEC 6 DEC 8

* NOTE: NEW DATE – DATES ARE SUBJECT TO CHANGE

DON’T MISS OUT. We are still accepting consignments for these auctions. Don’t miss out: call & take the hassle out of selling your equipment or trucks. Flexible contract options All-inclusive service Competing on-site & online bidders Certain sale & payment dates

For complete and up-to-date equipment listings visit

» rbauction.com

Page 96 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE