Northeast 26 December 25, 2019 by Construction Equipment Guide

Published Nationally Northeast Edition

® December 25 2019 Vol. LVI • No. 26

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

New York State Thruway Authority photo

Work Enters the ‘Last Mile’ on New England Thruway

W.F. Delauter to Celebrate 65 Years in Business…10

Family Roots Run Deep for H.O. Penn…14

A Manitowoc 11000-1 crawler crane hoists a new steel bridge girder into place.

By Cindy Riley CEG CORRESPONDENT

Construction crews are in the midst of a $135 million infrastructure project that will complete reconstruction of the final mile of a section of the New England Thruway (I-95) that carries traffic from New York City to the Connecticut border. The work marks the end of a long and Produce Biz Plans Massive Greenhouse…18

often challenging undertaking. “Over the past several decades, 14 miles of I95 in the Bronx, Pelham, New Rochelle, Mamaroneck, Harrison and Rye have been reconstructed, with the remaining mile from exit 22 to the Connecticut state line left to be complete,” said Richard Lee, New York State Thruway Authority chief engineer. Completing the ‘Last Mile’ is significant, because it will

bring the roadway to modern standards, increase safety and improve travel for the 140,000 motorists who travel this stretch daily, as well as improve the quality of life for the residents who live nearby.” Construction is expected to be completed in 2021. Lee said having come so far on the New England Thruway project is extremely see THRUWAY page 32

TZC Files Lawsuit Against NYS Thruway Authority

Table of Contents ................4 By Brenda Ruggiero

Paving Section..............41-59

CEG CORRESPONDENT

Tappan Zee Constructors

Mini & Compact Equipment LLC (TZC) and its law firm, Section ..........................63-89 Peckar & Abramson P.C, have filed a lawsuit against the New

Parts Section....................102 York State Thruway Authority (NYSTA)

concerning

the

Snow & Ice Section..103-106 release of certain documents related to the Governor Mario

Business Calendar ..........108 M. Cuomo Bridge. Auction Section ......110-120 Advertisers Index ............118

According to the lawsuit, which was filed with the Albany (N.Y.) County Clerk on Nov. 19, the petitioners requested documents pursuant

New York State Thruway Authority photo

to the Public Officers Law (the Freedom of Information Law or FOIL) more than 18 months ago. “The respondent has had more than a reasonable amount of time to locate and produce the requested documents and has never asserted a specific objection to petitioners’ request,” the lawsuit reads. It states that the records are necessary for petitioners to fully present certain claims that TZC has asserted against NYSTA arising out of the construction project known as the Governor Mario M. Cuomo Bridge, formally the Tappan Zee Hudson see LAWSUIT page 24

Page 2 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

QUALITY USED EQUIPMENT VALUE V ALUE & PERFORMANCE ASSURED

2006 CATERPILLAR AP1000D, 8645 HRS, S/N: EAD00119 ........$25,000

2012 CATERPILLAR 420F, 555 HRS, S/N: SKR00814 ................$64,000

2015 CATERPILLAR 259D, 1357 HRS, S/N: FTL04826 ........$40,000

2015 CATERPILLAR CB54B, 1054 HRS, S/N: RJN00186 ......$111,000

2016 CATERPILLAR D5K LGP II, 1275 HRS, S/N: KY200758 $129,000

2017 CATERPILLAR 308E CR SB, 1250 HRS, S/N: FJX07270 ..$89,000

2016 CATERPILLAR 313F L, 1157 HRS, S/N: HDK00326 ......$108,000

2013 CATERPILLAR 320EL RR, 5888 HRS, S/N: TFX00366........$133,000

2015 CATERPILLAR 730C, 4107 HRS, S/N: TFF00953 ........$239,000

2017 CATERPILLAR 236D, 460 HRS, S/N: BGZ03700 ................$36,000

Used Parts • Quality Parts • Attachments Are you looking for a reliable source for quality used components and parts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line. 2015 CATERPILLAR 906H2, 1720 HRS, S/N: JRF03095 ........$55,500

2014 CATERPILLAR 336E, 4452 HRS, S/N: RZA00377 ......$178,000

2015 CATERPILLAR CS56B, 862 HRS, S/N: L8H01205........$126,000

Call: 732/885-3005 Fax: 908/995-7522 jmeyer@foleyinc.com

www.outbackparts.com

ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE ENTIRE FLEETT.. RICH CALIFANO International & Domestic Used Equipment Sales & Purchasing

RCALIFANO@FOLEYINC.COM 732-261-8424

732-417-7109 Piscataway, NJ; Hammonton, NJ; Bensalem, PA; Whitehall, PA; Bearr,, DE WWW.FOLEYINC.COM/USED

JOE VILLA International & Domestic Used Equipment Sales & Purchasing

JVILLA@FOLEYINC.COM 267-990-8161

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 3

FROM THE DOWN-TO-EARTH EQUIPMENT PEOPLE SPECIAL FINANCING FROM 0% FOR 60 MONTHS. TM

www.jesco.us

800-241-7070

Some restrictions may apply. See dealer for details. Offer valid through 12/31/2019.

Page 4 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

W.F. DELAUTER & SON TO CELEBRATE 65 YEARS IN BUSINESS IN 2020

FAMILY ROOTS RUN DEEP FOR NEARLY CENTURY-OLD H.O. PENN

Not many organizations can say they’ve been around for nearly 100 years. Fewer can boast they are the fourth generation of family in the industry. But that’s exactly what’s happening at Caterpillar dealer H.O. Penn.

PRODUCE COMPANY PLANS MASSIVE GREENHOUSE COMPLEX

ACPA AWARD GOES TO FEDERAL HIGHWAY ADMINISTRATION

The award was presented in recognition of leadership in creating a framework for sustainable design and construction practices that consider societal, environmental and economic factors (the triple bottom line).

PARTS, TRAINING CENTER IS HEART OF SENNEBOGEN’S SUCCESS IN AMERICAS

A Canadian produce grower has started construction on what will be quite possibly the largest greenhouse complex in North America. It will be located in Oneida, N.Y., a small community approximately 30 mi. east of Syracuse, N.Y.

In most ways, it’s just another training session for heavy equipment technicians. But, on a second look, a few differences from the norm become apparent. For one: the shop itself.

Bobcat Company officially announced a three-year partnership agreement with Philadelphia Eagles’ pro quarterback Carson Wentz. As part of the partnership, Wentz will receive a variety of compact equipment.

CEG offers the second part of its Snow Removal Attachments Buyers’ Guide. In it, CEG gives you tips for locating the best winter tools for use with skid steers, wheel loaders and other light-duty machines.

Joshua Phillips will be replacing the retiring Bob Buckley, who has been trade show manager of Superintendent’s Profile and national sales representative of CEG for the past 15 years.

Association of Equipment Manufacturers (AEM) president Dennis Slater issued a statement Dec. 10 hailing a deal struck between House Democrats and the Trump Administration to move the USMCA closer to ratification.

More than 5,850 bidders participated online and in person at Ritchie Bros.’ multi-million-dollar unreserved public equipment auction Dec. 18, 2019, in North East, Md.

The first classes of the season begin the second week of January and run through the middle of April. More than 22,000 students have attended the courses, which are taught at GOMACO University facilities in Ida Grove, Iowa.

Caterpillar Inc. Chairman and CEO Jim Umpleby rang the opening bell Dec. 17 on the NYSE to mark the 90th anniversary of the company’s listing on the NYSE, which is considered the world’s foremost securities marketplace.

BOBCAT ANNOUNCES PARTNERSHIP WITH QB CARSON WENTZ

BOB BUCKLEY RETIRES; JOSH PHILLIPS JOINS CEG, SUPERINTENDENT’S PROFILE

VDOT EARNS ACPA’S LIFETIME PAVEMENT RECOGNITION AWARD

GOMACO UNIVERSITY ANNOUNCES ITS 2020 TRAINING SCHEDULE

Founder, Publisher & CEO Northeast Publisher Executive Publisher Editor In Chief Associate Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Teddy McKeon Craig Mongeau Joe Trinacria Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

114

Twitter

103 CEG’S SNOW REMOVAL ATTACHMENTS BUYERS’ GUIDE PART 2

113 ASSOCIATION OF EQUIPMENT

MANUFACTURERS HAILS AGREEMENT

114 RITCHIE BROS. HOSTS AUCTION IN NORTH EAST, MD.

116 CAT CELEBRATES 90 YEARS ON THE NEW YORK STOCK EXCHANGE

MINI & COMPACT SECTION

66 74 84 86 87

CEG’S MINI & COMPACT EQUIPMENT BUYERS’ GUIDE LIUGONG 9018 MINI-EXCAVATOR EXCEEDS SPECIFICATIONS

CEG PRESENTS HISTORICAL MINI AND COMPACT EQUIPMENT

SCREEN MACHINE LAUNCHES COMPACT CRUSHING, SCREENING PLANTS

JOHN DEERE COLLABORATES WITH CUSTOMERS FOR UPGRADES

DEPARTMENTS

108 BUSINESS CALENDAR 108 CLASSIFIEDS 110 COMING AUCTIONS

EQUIPMENT

41 56

CATERPILLAR Cat COMMAND for Compaction BOMAG Compact Cold Planer

Edwin M. McKeon Jr.

Kent Hogeboom

Ed Bryden

Bob Buckley

• New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware

• New York • New England • Northern Pennsylvania

• West Virginia • Western Pennsylvania

• National • Central Pennsylvania

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

NORTHEAST EDITION

YouTube

215/885-2900 215/760-6641 tmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2019, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from

Cell e-mail

518/863-4100 518/221-4936 bbuckley@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 25, 2019 â&#x20AC;¢ Page 5

A SHIN NING EX AMPL M E OF CUSTOMER INPUT. Our new 324E Skkid Steer packs customer-in nspired features and perfo ormance into an agile, XOWUD HIÆ&#x;FLHQW FR RPSDFW GHVLJQ It features eexceptional reach at truck bbeds, connect-underpressure auxiliaryy couplers, and your choice of controls including our exxclusive switchable electrohydraulic y (EH) ( option p that lets you y select amongg different contro ol ppatterns, at anyy time, at the push of a button. To To learn l more, see your dealer or visit our website.

3/$67(5(5 (48,30(17 &2 ,1&

www.plasterer.com :H 5HQW ,QWHJUDWHG *UDGH &RQWURO 7HFKQRORJ\ ,QFOXGLQJ /DVHU 6RQLF 7UDFNLQJ DQG *36

/(%$121 3$

( &80%(5/$1' 67

6(//(569,//( 3$

67$7( 52$'

3ODVWHUHU KDV PDFKLQHV ZLWK 7RSFRQ DQG 7ULPEOH ' /DVHU DQG ' *36 V\VWHPV LQ VWRFN DQG UHDG\ WR JR :H RIIHU IOH[LEOH UHQWDO SXUFKDVH WHUPV

%(7+/(+(0 3$

672.( 3$5. 52$'

/(:,6%(55< 3$

/2:7+(5 52$'

Page 6 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RENTALS - SALES - SERVICE - PARTS - TRAINING 0% Monthly Interest for 48 Months

Takeuchi TL12 Track Loaders

Takeuchi TB235 Excavators

• 2 year/2,000 hour full machine warranty • Traction Force: 13,770 lb. • 110 hp Kubota Engine

• Maximum reach at ground level 16’10” • Maximum Digging Depth 10’7.8” • 24.4 hp Yanmar Engine

0% Monthly Interest for 42 Months

Dingo TXL 2000

Dingo TX 1000 Wide Track

• Telescoping loader arm technology • Operating Capacity: 2,000 lbs • Hinge Pin Height: 123”

• Increased load capacity & greater reach at full height • Operating Capacity: 1,075 lbs • Hinge Pin Height: 81”

Great deals on used equipment for sale! Go to norrissales.com/used-equipment

We are a Full-Service Certified Dealer NEW JERSEY LOCATION 668 Berlin Cross Keys Rd., Sicklerville, NJ

856-740-1400

Frank Kimberling Ext. 2005

Items Available for Sale or Rent!

Financing* Available!

NorrisSales.com

PENNSYLVANIA LOCATION 1010 Conshohocken Rd., Conshohocken, PA

610-279-5777 Rich Hess Ext. 3055

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 7

631/643-2605 www.allislandequipment.com

Serving Nassau, Suffolk and the Five Boroughs

STILL FAMILY OWNED & OPERATED SINCE 1970

DO MOREE WITH A SINGLE MACHINE Most excavators can only do one thing at a time – trravel, lift or swing. With our exclusive independent travel feature, KOBELCO excavator t s can do all three. Advanced hydraulic circuitry keeps the right amount of power going to the right places, kg qgm [Yf lY[cd] ]n]f l`] egkl [gehda[Yl]\ lYkck egj] ]^Ú[a]fldq Yf\ kY^]dq l`Yf ]n]j Z]^gj]& Hdmk$ `q\jYmda[ Ûgo k]llaf_k ^gj mh lg )0 \a^^]j]fl YllY[è]flk [Yf Z] Y\bmkl]\ ja_`l ^jge l`] [YZ$ kg koal[àf_ Z]lo]]f lYkck lYc]k gfdq eafml]k& L`] f]pl lae] qgm j] YZgml lg ljYfkhgjl emdlahd] eY[àf]k lg l`] bgZkal]$ [gfka\]j k]f\af_ bmkl gf] CG:=D;G lg lYc] [Yj] g^ Zmkaf]kk&

3 Year 3000 Hour Warranty

Best in the Industry Buy a new Kobelco & get Up to

0% for

48 Months

Wishing Everyone a Healthy & Prosperous New Year!!! KOBELCO-USA.COM/EXCAVA VATORS

Lowboy

WINTER

Page 8 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Winter Repair Special!

Ask us about low-rate parts and service financing. Offer ends 2/29/20

• Bring your machine to one of our 13 locations within our 6 state regions and take advantage of your down time for big savings! • Receive a 10% Discount on Parts & Labor. (Excluding undercarriage) • Eligible repairs must include a minimum of $5,000 in Komatsu Genuine Parts. Repairs must performed by dealer. • Eligible repairs must have inspection performed by a Product Support Representative.

Holbrook, NY 631-563-7600

Danbury, CT 203-743-0088

Holmes, NY 845-878-4004

South Plainfield, NJ 908-561-9000

Yonkers, NY 914-738-5100

Pine Bush, NY 845-744-2006

Newington, CT 860-665-7470

Winslow, NJ 856-767-5900

SPECIAL

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 9

Schedule Your Inspection Today Let us keep your equipment in top condition

Machine uptime is crucial for your success and regular equipment maintenance is the key to ensuring long-term reliability, performance and value. Your Product Support Service Representative (PSSR) will perform a no-obligation walk-around inspection and provide a written evaluation and quotation for any items that could lead to future downtime. Your PSSR is your partner in managing your fleet’s Repair and Maintenance needs.

Call us today to schedule your Free Walk-Around Inspection!

KOMATSU WINTER FINANCING PROGRAM • • • •

It keeps you running

Rates as low as 0% Up to 3 skips allowed Simple, 1 page credit application Most applications approved within 4

hours • Repairs performed by Komatsu-certified technicians • Every Komatsu Genuine Part is covered

Ask your Komatsu Dealer for more information on our Financing Program and schedule your service work ASAP!

Hatfield, PA 215-822-0145

Wilkes-Barre, PA 570-824-9891

State College, PA 814-308-5660

Harrisburg, PA 717-652-3190

Frackville, PA 570-874-6140

Baltimore, MD 410-247-2100

Laurel, DE 302-715-5382

Fix it now, pay for it later.

Page 10 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

W.F. Delauter & Son to Celebrate 65 Years in Business in 2020 By Lori Lovely CEG CORRESPONDENT

With one International TD6 dozer, Willie F. Delauter and his son, Russell, started a business in Thurmont, Md, in 1955. W.F. Delauter & Son Inc. used that dozer to perform residential and commercial grading. “Willie was so talented at grading that customers would wait for weeks just to have him do their work,” said Kirby Delauter, current owner of the company and grandson and son of Willie and Russell, respectively. Prior to launching their own business, the father-son team worked up and down the east coast for a large road construction company through the 1950s. When he was just 17, Russell’s construction career was interrupted when he joined the U.S. Army and was sent to Korea, where he served as a platoon Sergeant First Class with the 3rd Infantry Division from 1950-51. At just 20 years old, he was in charge of eight tanks. Upon being honorably discharged in 1952, Russell resumed working in construction. After his father’s passing at age 57 in 1967, Russell hired a civil engineer in order to expand the business to pursue sanitary sewer, water and storm sewer projects, as well as larger grading projects. The company also did light residential and commercial building projects through the 1980s.

Kirby Delauter oversees 56 employees working on projects in the Mid-Atlantic area, Maryland, Pennsylvania and West Virginia.

A New Generation When he was just 17, Russell’s construction career Russell’s youngest son, was interrupted when he joined the U.S. Army and Kirby, joined the company after was sent to Korea, where he served as a platoon his own honorable discharge Sergeant First Class with the 3rd Infantry Division from the U.S. Army 29th from 1950-51. At just 20 years old, he was in charge Infantry Division. Upon his of eight tanks. father’s retirement in 1994, Kirby assumed the role of president of the company and moved it to one of its 4th generation employees. But for now, overseeing 56 employees Emmitsburg, Md., to allow the business to working on projects in the Mid-Atlantic continue to grow. Kirby’s wife, Tina, works with HR and area, Maryland, Pennsylvania and West permitting and his 90-year-old father still Virginia is Kirby’s responsibility. drives to job sites and checks in on the busiGrowing the Company ness weekly. Kirby’s oldest son, William, The evolution of W.F. Delauter & Son who has a civil engineering degree from Virginia Tech and is a licensed professional goes beyond the generational shift. The engineer, is expected to join the company as company that began with one dozer and two

In the late 1960s, Delauter added larger scale municipal and government site work and utility work, followed by water treatment, sewer pump stations, small bridges and general site work in the early 1980s. Pictured is work putting in a manhole sewer.

employees doing basic grading work added light building of residential and commercial buildings. In the late 1960s, they added larger scale municipal and government site work and utility work, followed by water treatment, sewer pump stations, small bridges and general site work in the early 1980s. To perform that work, their fleet consists of 12 large excavators, a variety of mid-sized excavators, scrapers, compactors, off-road trucks, track loaders, wheel loaders, track dozers, on-road dump trucks, fuel lube units, hydroseed units, large straw mulch stabilization blowers, roll-off containers and trucks, and full-site surveying and GPS control systems. “We have a great newermodel fleet of equipment, which is maintained inhouse [by] excellent heavy equipment mechanics,” Kirby said. Business is booming, Kirby reports. The company is nearing completion of a $2 million sewer pump station in Maryland see DELAUTER page 116

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 11

ROGERS 65 TON 4-AXLE DROPSIDE

IN STOCK! 9’ WIDE!

2015 Rogers 55 Ton, No-Foot Neck, 8'-6" x 25' deck, 18"/ 20" ride height, 275's, Aluminum.................. ..............IN STOCK!

Rogers Custom 60 Ton Gentle Riser, 26’ Clear Deck, Paver Front Ramps, Bucket Cut Out, 275’s on Aluminum, Air Lift 3rd & 4th Axles, Night Lights, Strobes ..............IN STOCK!

Rogers No Foot, 50 ton Severe Duty, TR8750 suspension, 24' extra thick deck, aluminum wheels, solid trailer .............. $25,500 IN STOCK!

Rogers 50 Ton No Foot, 24’ deck, air ride ...................... SALE PRICE $18,900

ASK ME ABOUT AIR RAMPS!

Rogers 35 ton, Gentle Riser, 24' deck, 275's Aluminum, Night Lights & Strobes. Rogers Red and Black Paint ................ ................IN STOCK!

Rogers CY50GR, 50 Ton Gentle Riser, Paver Ramps, 275’s, Aluminum Wheels, Air Lift 3rd, Night Lights, Strobes, Black and Red Paint.. ................IN STOCK!

Felling 25 Ton, Air Tilt, Air Ramps, 24’ Deck + 6’ Tail ........ ................IN STOCK!

Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint, 22' and 24' deck, 8’ Air Ramps ............ ................IN STOCK!

Page 12 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

845/278-7766 Fax: 845/278-4431 E-mail: dan@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT EXCAVATORS:

SSL’S:

2015 DOOSAN DX350LC-5, FULL CAB, QUICK COUPLER, 495 HRS, 2 WAY PIPING ....................$249,500 2003 KOBELCO SK210LC, CAB W/HEAT/AC, GEITH THUMB, GEITH BCKT, 4916 HRS..........................SOLD 2017 NEW HOLLAND E30B, CAB WITH HEAT/AC, 36 HOURS, MANUAL COUPLER,, 4 WAY BLADE, 24” BUCKET ....................................................................................................................................................$46,995 2016 NEW HOLLAND E55BX, FULL CAB W/HEAT/AC, BLADE, RUBBER TIRES, COUPLER, THUMB, 2126 HRS ..........................................................................................................................................................$46,000

2000 NEW HOLLAND LX865S, CAB, HI FLOW, 1717 HOURS..............................................................$13,995 2003 NEW HOLLAND LS180, CAB, HI FLOW, 2542 HOURS................................................................$12,000

CHIPPERS:

1996 MORBARK 2400, HYDRAULIC FEED WHEEL LIFT, EXTENDABLE TONGUE, DEERE ENGINE, 1352 HRS ..........................................................................................................................................................$19,995 2016 BANDIT 1390XP, 15” DRUM, CAT 122 HP, WINCH, AUTO FEED, 2073 HRS ................................SOLD TRACTORS: 2004 BANDIT 200XP, WINCH, 115 HP DEERE ENGINE, EXTENDABLE TONGUE, HYDRAULIC FEED WHEEL 1994 FORD 5640 SLE TRACTOR, ALAMO BOOM & FLAIL HEAD, AB WITH AC/HEAT, 2WD, 2371 HOURS LIFT, 4874 HOURS ..................................................................................................................................$19,995 ..................................................................................................................................................................$34,995 2008 BANDIT 255XP, 140 HP DEERE ENGINE, WINCH, HYDRAULIC LIFT, 7000 HOURS ................$19,995 2011 NEW HOLLAND 3050, CB WITH HEAT/AC, 430 PTO HP, LOADER, CVT TRANSMISSION, 762 HOURS, WHEEL LOADER: BEMCO SPRAYER ..................................................................................................................................$22,995 2006 KOMATSU WA50-3E0, ROPS, BUCKET AND FORKS, 5445 HOURS ..........................................$18,995

DOZERS:

MISCELLANEOUS:

2004 NEW HOLLAND D85 DOZER, CAB WITH HEAT/AC, 1045 HOURS ............................................$49,995

2012 ALAMO TRAXX RF REMOTE MOWER, REMOTE CONTROL, TIER 3 ENGINE, RUBBER PADS WITH BOLT ON CLEATS, 51” FLAIL HEAD WITH HAMMER KNIVES, 38 HRS ..............................................$55,000 2017 BOMAG BW213D-4, CAB W/HEAT/AC, VIBRATORY ROLLER, 84” DRUM ROLLER, 64 HRS$106,800 2014 DOOSAN DXB260 BREAKER, 8500 LBS, FOR DX350, HAMMER TOP FOR PIN GRABBER ....$40,000 2014 JCB 534-140 TELEHANDLER, HI VISIBILITY CAB W/AC/HEAT, 4WD, 7700 LB CAPACITY, 46’ REACH, FRONT STABILIZERS, HYDRAULIC COUPLER, 2692 HRS ..................................................................$75,000 2016 KAGE SBK96 SNOWKAGE, BLADE SET UP FOR SKID STEER, INCLUDES CROSSOVER RELIEF VALVE, 8’ BLADE ........................................................................................................................................$6,000

TLB’S: 2004 KUBOTA L48 TLB, ROPS, 2635 HOURS, 4WD, HYDRO TRANSMISSION ................................$25,000 2002 JOHN DEERE 310SG TLB, CAB, EXTENDABLE DIPPER, 3568 HOURS ....................................$29,995

TRACTOR LOADER: FORD 1100 TRACTOR LOADER, 2 ..........................................................................................................$5,995 2015 NEW HOLLAND WORKMASTER 33, 4WD, GEAR DRIVE, ROPS, 50 HOURS LIKE NEW ........$17,995

CRAWLER LOADERS: CASE D450, 4 IN 1 BUCKET, LOADER, 18: BACKHOE BUCKET ............................................................$8,995

See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM MANASSAS, VA Dealer

12051 Tac Court Manassas, VA 20109 703/257-2381

HARRISBURG, PA Imprint Area 6680 Allentown Blvd.,

JESSUP, MD 10421 Guilford Road, Jessup, MD 20794 410/792-9134 from Washington D.C. 301/725-7394

DELMAR, DE 38420 Sussex Highway Delmar, DE 19940 302/846-3033

Harrisburg, PA 17112 717/652-5430

KING OF PRUSSIA, PA 450 E. Church Road, King of Prussia, PA 19406 610/279-5200

2008 BANDIT 255XP

2002 DEERE 310 SG TLB

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 13

HIGH Q QUALITY USED EQUIPMENT E FROM M TRACEY ROAD D EQUIPMENT

SYRACUSE ALBANY BINGHAMT TON QUEENSBURY ROCHESTER T UTICA WA ATER T TOWN

CONT TA ACT CT JESSE JESSE W WELLER (800) 872-23 390 USED@TRACEYRO OAD.COM TRACEYROAD.COM/USED

2016 RUBB BLE MASTER RM90GO!

2015 RUBBLE UBBLE MASTER MA RM100GO! 0GO!

2012 KOBEL KOBE EL LCO SK140SRL LCC-3

2013 HIT H TA ACHI ZX135US-3

2014 BELL B30E HAUL TRUCK

2014 BELL B35D HAUL TRUCK

• (4) AV AVAILAB AILABLE BLE • HOURS ST TAR ARTING AT AT 2,700 • 322HP ENG GINES • 30 TON+ CAPACITY • DEALER OWNED&MAINT TAINED SALE PRICING NG STAR STARTING AT AT: $174,910 74,910 LOCATION: OCATION: EAST EA T S SYRACUSE

• (2) AV AVAILABLE A • HOURS RS STAR STARTING AT AT 3,500 • 35 TON N CAPACITY • DEALE ER OWNED & MAINT TAINED AINED SALE PRICING RICING STAR STARTING AT AT: $179,910 10 LOCATION: OCATION: SYRACUSE, S NY

2014 SAKA AI SV540D V540D COMP PA ACTO OR

2014 SA AKAI SV540 V540T COMP PA A ACTOR

• INV#79670 0CEG • 1,010 HOURS • 23,610LBS OPERATING ATING WEIGHT • 84 84” DRUM WIDTH • 160HP CUM MMINS ENGINE SALE PRICE E: $59,910 LOCATION: OCATION: SYRACUSE, S NY

• INV#7 79672CEG • 796 HOURS OURS • 24,450LBS. 0LBS. OPER OPERATING ATING WEIGHT • 84” PA ADFOOT DRUM • 160HP P CUMMINS ENGINE SALE PRICE: RICE: $69,910 LOCATION: OCATION: SYRACUSE, S NY

2012 KA AW WASAKI A 90Z7

2014 KA AW WASAKI 80Z7 WHEEL LL LOADER

• INV#832111CEG, 1,193 HOURS • PORTA TABLE E IMPACT CRUSHER • 62,500LBS S OPERATING ATING WEIGHT • 226HP DEERE ERE ENGINE • REMOTE CONTROL C CALL LF FOR PRICING P LOCAT ATION: SYRACUSE, NY

• INV# 1301111CEG • 3,608 HOU URS • 19.7” TRACKS • AUX HYDR RAULICS • COUPLER & 36” BUCKET • 60” HYD TIIL LT BUCKET PRICE: $74,900 74,900 900 LOCATION: OCATION: SYRACUSE, S NY

• INV#76854 4 • 6,819 HOU URS • 51,700LBS OPERATING ATING WEIGHT • 5.5YD GP BUCKET B • 280HP ENG GINE SALE PRICE E: $119,910 $119 910 LOCATION: OCATION: SYRACUSE, S NY

2013 KOBEL KOBE EL LCO SK260L LC-9 C-9 EXC XCAVA AT TOR O

• INV#77944 4CEG, 3,480 HOURS • 57,300LBS OPERATING ATING WEIGHT • 181HP • AUX HYDR RAULICS • 54 54” BUCKE ET SALE PRICE E: $99,910 LOCATION: OCATION: SYRACUSE, S NY

• INV#83484, 83484, 1,563 HOURS • PORTA TABLE A IMPACT CRUSHER • 73,000 0LBS OPERATING ATING WEIGHT • 306HP P, DEERE ENGINE • REMO OTE CONTROL CALL LF FO OR PRICING LOCAT ATION: SYRACUSE, NY

• INV#128228CE 28228CEG • 3,489 HOURS • 32,000 0LBS OPERATING ATING WEIGHT •9 9’11” 11 ARM • HYD COUPLER C & 46” BUCKET • RUBBER ER PADS P W/28” TRACKS W/ PRICE: $84,900 LOCATION: OCATION: MARCY, MARCY, NY

• INV#80042CE 80042CEG • 2,723 HOURS • 4.2YD PIN-ON BKT • 38,450 0 OPERATING OPERATING WEIGHT • 193HP HP P CUMMINS ENGINE SALE PRICE: RICE: $117,910 $117,910 LOCATION: OCATION: MARCY, MARCY, NY

2013 SA AKAI SW880-1 ASPHA AL LT ROLLER

• INV#78258CE 78258CEG • 2,845 HOURS • 79” DO OUBLE DRUM • 29,560LBS 0LBS OPER OPERATING ATING WEIGHT • 131HP 3 TIER 3 ENGINE SALE PRICE: RICE: $41,910 LOCATION: OCATION: WA WATERTOWN, TER NY

Page 14 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Family Roots Run Deep for Nearly Century-Old H.O. Penn

Rob Cleveland

Not many organizations can say they’ve been around for nearly 100 years. And fewer still can boast that they are in their fourth generation of family in the industry. But that’s exactly what’s happening at New York & Connecticut Caterpillar dealer H.O. Penn. It was founded in 1923 as the Ginsberg-Penn Co. by businessmen Hamilton O. Penn, Frank Ginsberg and E. Gwynn Robinson, shortly after renamed H.O. Penn. When the last founder in the business, Hamilton Penn died in 1946 the first members of the Cleveland family — brothers Robert and Royal — sought to acquire the dealership. At the time, Bob ran a New Jersey-based construction company: Robert W. Cleveland & Company. His construction experience included building roads at Fort Dix and the Naval Ammunition Depot in New Jersey during World War II. Bob also did the landscaping for the first New York World’s Fair and the Henry Hudson Parkway, as well as building the first two sections of the Garden State Parkway. With H.O. Penn being run by key employees Stuart Wade and Ralph Johnson, Bob and his brother Roy instead were offered a new Caterpillar territory in central Pennsylvania that formerly belonged to Beckwith Machinery. Cleveland Brothers Equipment Company was formed in 1948, and some of the first hires were Bob and Roy’s father, Charles Cleveland (known as CW) and Bob’s father-in-law Charles Harding. As luck would have it, less than 20 years later the family acquired H.O. Penn in 1965. Roy remained in Pennsylvania to run Cleveland Brothers while Bob moved to New York to run H.O. Penn. Bob’s son, Tom, joined the firm in 1968. In 1985, Tom became president of H.O. Penn. Tom later decided it was

Rob and Jill Cleveland’s sons, Charlie, Ben and Garrett, will hopefully be the fifth generation of the Cleveland family to work at H.O. Penn.

time to get his son, Rob, introduced to the company that he hoped his son would someday run. Rob worked part-time at the Armonk, N.Y. store starting in 1991 during college breaks. In the following years, Rob held various positions at all of H.O. Penn’s branches, including the Electric Power Generation Division. In 1995, his father gave Rob his first full-time job at the Bronx store working in the credit department. “As a young man I always felt that leading H.O. Penn was going to be my path, as it had been for the generations before me,” Rob said. “Family is deeply entrenched in our organization. Over the years we have had sixteen family members working in the Dealerships, including my wife, Jill, who just came on board as our events coordinator. “I am the fourth generation of Cleveland’s in the industry and third at H.O. Penn. My wife and I have been blessed to have three sons, Charlie age 10, Ben age 9, and Garrett age 7, so I am sure as one can be that there will be a fifth generation. “One of the keys to our success has been treating our employees like family. H.O. Penn had a Organizational and Employee Development Department long before it was in vogue to do so. We have employees here that have been with us for over fifty years and the average tenure is thirty years. We also have several multi-generational employees, some that have been here as many as three generations. We make every effort to be very visible in the communities that we

serve, and we encourage our employees to do the same. We want to support the communities that have supported us in any way possible.” Today much of Rob’s focus is looking toward and guiding H.O. Penn into its future position in the construction equipment marketplace. “We are always taking a careful look at what’s happening in the marketplace, what segments of the market are growing, where is the population expanding, and are there parts of our market that industry is relocating to. We are continuously asking ourselves questions like will the suburbs continue to grow and, if so, which suburbs. “Our last expansion several years ago was a new location in Bloomingburg, New York. We projected that construction equipment utilization would be increasing in that market and that our customers would be well served by a location in that area. It proved to be a very good move for us.” Being a nearly one-hundred-year-old family business is not without its challenges, and according to Rob, perhaps the biggest challenge that H.O. Penn faces on a daily basis is one of the markets that it serves, namely, New York City. “New York City is the most complicated city in the world if you are involved in construction equipment. The regulations, taxes, bureaucracy and the cost of doing business is like no where else in the world. But, after all this time we are experts at making it work and we enjoy doing it.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 15

Page 16 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

F I N A N C I N G AVA I L A B L E 286 Central Ave., South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 • Fax 973-589-4811

E-mail: info@tes-inc.net • Website: www.tes-inc.net

2007 Kalmar DCE 140-6, 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks .. ..........................................P.O.R.

2000 Manitowoc 2250, 300ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 ....................P.O.R.

2007 Manitou MT1745, 10,000 lb. capacity, 54’ max lift, repaint, enclosed cab ...... ..........................................P.O.R.

2001 Link-Belt RTC 8040 SII, 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator.... ..........................................P.O.R.

1980 Manitowoc 4100W SII, 230-ton, S/N: 41649, 150' boom ................................P.O.R.

1999 Link-Belt LS248 HII, 200-ton, "C" ctwts, Ctwt removal system, 3rd drum, 200' main boom, 2 winch, S/N: H3I9-2238 ................P.O.R.

2007 Manitou M50-4, 10,000 lb. capacity, 4WD, 163” max lift w/ SS, enclosed cab, 48” forks..................................P.O.R.

2005 Manitex 1770C, 17- Ton, S/N 119511, 18,042 miles, Ford F750 210 HP CAT diesel, 23’ jib, 20’ wood deck ....P.O.R.

2008 Link-Belt RTC 8090, 90ton, 140’ main boom, 35’ – 58’ jib, 2 winches ..................P.O.R.

2009 Shuttlelift 3340B, S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock ..............P.O.R.

2007 Demag AC200-1, S/N: 33167, 240-ton, Drive axle: 10x8x8, ZF automatic transmission, 6 cylinder diesel engine, 223’ main, 108’ jib ...... ..........................................P.O.R.

2007 Link-Belt 218 HSL, 110ton, 150’ main boom, “ABC” Ctwts, Block/Ball, diesel engine ..............................P.O.R.

Authorized Dealer

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 17

Tier 4 Final RTC-8050 Series II RTC-8065 Series II

75 RT

RTC-8090 Series II

100 RT

120 RT RTC-80130 Series II

RTC-80160 Seriess II

YOUR O #1 SOURCE FOR ROU UGH TERRAIN RENTALS A Ver e mont 802-658-1700 Masssachusetts 508-499-1950 Pennnsylvania 717-795-0700 N Yoork 315-676-2008 New

w .woodscrw.com www

BUY

•

LEASE

Lexington, Kentucky | www.linkbelt.com .

•

RENT

Page 18 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Produce Company Plans Massive Greenhouse Complex A Canadian produce grower has started construction on what will be quite possibly the largest greenhouse complex in North America. It will be located in Oneida, N.Y., a small community approximately 30 mi. east of Syracuse, N.Y. But, don’t be mistaken, there is nothing small about this project. Three greenhouses are being constructed, each which will take up an area of 32 acres. In addition to the three 32-acre greenhouses, there also will be a 14-acre greenhouse, giving the complex a total of 110 acres under glass. For the sake of comparison, that is roughly the equivalent of 17 Carrier Domes. The owner of this project is Mastronardi Produce, a family owned company located in Kingsville, Ontario, Canada. Initially the greenhouses will be producing berries and tomatoes that will be sold to major retailers such as Wegmans, Price Chopper, Tops and Walmart under the One of three 35-acre greenhouses, partially completed. brands of Sunset and Backyard Farms. The total project is estimated to cost $120 million. All of the greenhouses will operate using hydroponic technology, which will allow for year-round produce production. Once fully operational, it is estimated that it will employ 120 people. A project of this size requires a significant amount of site and utility work, and for that aspect of this project the services of Manfred Construction have been retained. Manfred Construction, headquartered in Westport, N.Y., specializes in site work, trenching, roadway excavation, site utility work, paving and site development. As of early November, one of the 35-acre green- Charles Manfred (L), president of Manfred Construction, has worked houses has been completed and is fully operational, with Don Bauer, Robert H. Finke & Son sales rep, for many years.

Manfred Construction, headquartered in Westport, N.Y., specializes in site work, trenching, roadway excavation, site utility work, paving and site development.

A stockpile of 162,000 cu. yds. of unsuitable material was loaded and relocated.

and a second is under construction. According to Charles Manfred, president of Manfred Construction, he and his crew currently are focused on completing the site work for the third site so that construction can begin on that phase before winter sets in. In addition to handling the site work and excavation, Manfred Construction is installing the utilities at the site, the most significant aspect being connecting all of the greenhouse waterlines to the City of Oneida’s water supply. This involved installing 10,000 ft. of 12-in. main water line and boring 24-in. castings under several streets along with the construction of a 10- by 12-ft. meter pit (an underground vault), which allows the water to be metered. The very name hydroponic implies that a tremendous amount of water could be consumed in the growing process. However, Charles Manfred pointed out that an extensive water collection system has been created that captures every drop of water that lands on the roof of the hundred plus acres of greenhouse and collects it for reuse. The first phase of the excavating aspect of this project called for 162,000 cu. yds. of unsuitable material to be moved out in a very short amount of time: Sept. 11 to Oct. 15, to be precise. “On paper this phase of the project looked to be impossible. We pride ourselves on accomplishing the impossible,” Charles Manfred said. Manfred Construction proceeded to work seven days a week, 12 hours a day, operating with two crews under lights. According to Manfred, “For that entire period nobody got to go home, we worked on way too little sleep, and after about six days in we see GREENHOUSE page 96

Six 30-ton Doosan trucks on rent from Robert H. Finke & Son are put to the extreme test hauling saturated, heavy clay material.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 19

716-655-1101

1101 Maple Road Elma, NY 14059

Toll Free: 800-652-1101 Fax: 716-655-0374 KOBELCO ED150 BLADERUNNER: CLEAN ED150 WITH 6 WAY PAT BLADE, CURVED TRACK PADS, 8'6" TRANSPORT WIDTH, BI-DIRECTIONAL AUXILIARY HYDRAULICS, ROCKLAND HYDRAULIC THUMB ..........................................................$83,000 2015 TEREX PT110F FORESTRY: NEW 20” TRACKS, 45GPM HIGH FLOW, REVERSING FAN, HEAT, A/C RADIO, PRESSURIZED CAB, BACK UP CAMERA, READY TO WORK. +N3175............................................................................................................................$64,900

2016 KPI-JCI FT4250CC, (1) PIONEER FT4250, S/N- 415918, CLOSE CIRCUIT TRACK MOUNTED IMPACTOR INCLUDES: ENGINE - CAT C13 440 HP, TIER IV, 1800 RPM CONTROL SYSTEM - RADIO REMOTE IMPACTOR - 4250 HORIZONTAL SHAFT WITH HEAVY-DUTY SOLID ROTOR ASSEMBLY, 3 REVERSIBLE AND REPLACEABLE BLOW BARS, HOURS: 358, SERIAL NUMBER: 415918, CONDITION: USED, STOCK NUMBER: AG1233 ...... ........................................................................................................................................................$575,000

DON T SET LIMITS ON WHAT YOU CAN DO.

SUPERIOR BROOM MODEL SM80CT: FRONT MOUNTED SELF-PROPELLED, 80HP CUMMINS, PRESSURIZED CAB, VERY GOOD CONDITION, 2800 HRS....................$31,500

Most excavators com me with a power boost function that can deliver extra force when you needd it most – but only for a few seconds at a time.

2016 KPI-JCI FT2650, FT2650 TRACK MOUNTED JAW CRUSHER ENGINE - CAT C9.3 300 HP, TIER IV, 1800 RPM CONTROL SYSTEM - RADIO REMOTE/TETHER VANGUARD JAW CRUSHER - 2650 AUTOMATIC HYDRAULIC DUAL WEDGE ADJUST CSS, HYDRAULIC DRIVE FOR CRUSHER, HOURS: 428, SERIAL NUMBER: 416212, CONDITION: USED, STOCK NUMBER: AG1238 ........................................................................................$525,000

What good does that do when you have a whole day’s work ahead of you? The power boost in KOBELCO excavators provides ~10% more bucket breakout force when you need it, for as long as a you need it. They also offer a dedicated heavy lift function that provides

ASV VT70 VERTICAL LIFT: ENCLOSED CAB WITH HEAT, A/C RADIO, SUSPENSION SEAT. PREMIUM HYDRAULICS, RIDE CONTROL, HYDRAULIC QUICK ATTACH, SELECTABLE BUCKET POSITIONING, HIGH FLOW. PRICE INCLUDES 72" GP BUCKET$65,700

~10% more power whe h n liftiing and swinging. Combib ne that with our heavy-duty

2017 ASV VS60 ASV VS60 VERTICAL LIFT 60HP SKID STEER: ENCLOSED CAB WITH HEAT & AC, RADIO, SUSPENSION SEAT, BLOCK HEATER, 72" BUCKET, BLOCK HEATER, HYDRAULIC BUCKET COUPLER ........................................................................$37,500

construction and you can be sure they’ll nev

2015 ANACONDA TR60, THE TR60 IS A TRACK MOBILE HIGH CAPACITY STOCKPILING CONVEYOR, WHICH IS STRONG AND ECONOMICAL TO RUN. THE TR60 IS VERSATILE AND CAN BE USED ON ITS OWN OR WITH OTHER SCREENING PLANTS. HOURS: 624, SERIAL NUMBER: TR6036-0070, CONDITION: USED, STOCK NUMBER: AG1218............................................................................................................................................$62,930

a ch

2015 DOOSAN DX180LC-3: LOW HOURS (850)!! VERY CLEAN, DUAL AUXILIARY HYDRAULIC KITS, HELAC POWERTILT COUPLER. 1 BUCKET ..................................$99,500

GT165 GT165DF TRACK MOUNT SCREEN – TWO DECK SCREEN:ONE (1) 2516 DOUBLE DECK SCREEN: 5’ X 16’ SCREEN WITH SIDE TENSIONED TOP STANDARD, 15' BOTTOM DECK SCREEN DRIVEN BY 900 RPM VIBRATING MECHANISM MOUNTED ON SCREEN; ADJUSTABLE AMPLITUDE WITH ADD ON WEIGHTS; COIL SPRINGS FINES COLLECTING HOPPER; TOP AND BOTTOM DECK DISCHARGE CHUTES; FIXED ACCESS LADDER WITH CATWALKS; HANDRAILS ARE REMOVABLE FOR TRANSPORT, LESS SCREEN CLOTH ............................................................................................................$319,250

2008 DOOSAN DX225: RECENT MUNICIPLE TRADE! GOOD CONDITION, COMES WITH BUCKET, AUXILIARY HYDRAULICS FOR HAMMER OR PLATE COMPACTOR, +U3617 ..........................$49,750

3600 PROSIZER, WHEEL-MOUNTED CRUSHING AND SCREENING PLANT VIBRATING SCREEN: ONE (1) 2618V DOUBLE DECK PEP VARI-VIBE® HIGH FREQUENCY SCREEN, 6’ (1.83M) X 18’ (5.49M) HIGH-FREQUENCY TOP AND BOTTOM DECK, TOP AND BOTTOM DECK DRIVEN BY FOURTEEN (14) HYDRAULIC VARIABLE SPEED VIBRATORS, (0-4200 RPM) MOUNTED BELOW SCREENS FOR DIRECTLY INDUCED VIBRATING ACTION, HYDRAULIC CONTROLS FOR VARIABLE ANGLE OPERATION, TOP AND BOTTOM DISCHARGE CHUTES, AGGREGATE SPREADER, STEP TYPE WALKWAY WITH LADDER ......................................................................$638,345

2018 DF410: UNIT NUMBER +AG1274, 4’ X 10’ 2 DECK SCREEN, UP TO 300 TPH ....................$134,500

NEW ASV RT65: ALL WEATHER CAB WITH HEAT AND AC, PREMIUM HYDRAULICS (RIDE CONTROL, HIGH FLOW, BUCKET POSITIONING, HYDRAULIC BUCKET COUPLER), 72" GP BUCKET WITH BOLT ON CUTTING EDGE. 67HP TURBO DIESEL, TWO SPEED TRAVEL. 2 UNITS TO CHOOSE FROM!

Page 20 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABBOTTSTOWN CARLISLE ELIZABETHTOWN HALIFAX

717-896-7002

www.messicks.com

The right tool is a game-changer.

We are a full service authorized Eager Beaver Dealer.

Equipment Rentals – Daily, Weekly and Monthly Terms Please Call for Rates

DELIVERY

2009 JCB Forklift Model 940, 4x4, 1,554hrs., 3 stage mast, with S/S............$29,900

2015 Terex Mini Dumper, 4x4, elevator body, 1 ton capacity, Kubota Diesel Like New ...... ................$16,900

1989 Case Forklift Model, 586 E, 4x4, 3 stage mast, Very Good Condition ..$16,900

2005 JLG Boom Lift, Battery powered, Non Marking Tires, 30 ft, Platform Height ......$15,900

2004 Sterling Single Axle Water Truck L8500, New 2500 Gal Tank, 5 Spray Heads, Cat Diesel ......$42,500

2011 Case 586G, Forklift, 4x4, Triple Mast................ ................$34,900

Various New Excavators, Grapples and Thumbs

Whatever job you face, take it to another level in a 200 Series Skid Steer Loader. Reach higher and dump farther with Super Boom® — designed to go beyond what was thought possible. With increased stability and one of the widest cabs available, you can handle long workdays with maximum comfort in even the most challenging terrain. © 2019 CNH Industrial America LLC. All rights reserved. New Holland is a trademark registered in the United LmZm^l Zg] fZgr hma^k \hngmkb^l% hpg^] [r hk eb\^gl^] mh <GA Bg]nlmkbZe G'O'% bml ln[lb]bZkb^l hk Z_ÛebZm^l'

Visit www.weaco.com to view our complete inventory 4009 Conrad Weiser Parkway • Womelsdorf, PA 19567 Phone: (610) 589-5555 • Fax: (610) 589-5350 • Email: sales@weaco.com

2012 CAT 962K, 10,081 Hrs, Heat, A/C, 2011 CASE 580SN, 5045 Hrs, Heat, A/C, 2011 NEW HOLLAND B95B, 1305 Hrs, Hyd Coupler, 23.5R25 Tires, Nice! .............. E-hoe, 4x4, 4-Stick Ctrl, 24" Bucket.............. Heat, A/C, 4x4, E-hoe, 24" Bucket, Pilot ....................................................$92,000 ....................................................$37,500 Ctrls Nice! ....................................$39,500

2008 KOMATSU D51PX-22, 7368 Hrs, 2011 CASE CX135SR, 4809 Hrs, Heat, 2008 CASE CX290B, 6603 Hrs, Heat, Heat, A/C, 11' PAT Blade..............$52,500 A/C, Aux Hyd, Hyd Coupler, 24" Bucket ...... A/C, Aux Hyd, 24" Bucket............$52,000 ....................................................$55,000

FINANCING

MIKE ZYNDORF LLC 609-625-8660 609-442-5514 (EVENINGS) FAX 609-625-8664 6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory

2006 CAT D6N LGP, 10,093 Hrs, Heat, 2001 CAT 325BL, 5776 Hrs, Heat, A/C, 2018 DEERE 30G, 63 Hrs, Auxiliary A/C. 13.5' PAT Blade, Topcon GPS Ready .... 42" Bucket ..................................$49,000 Hydraulics, Blade, 18" Bucket ......$32,500 ....................................................$49,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 21

2015 JOHN DEERE 320E

‫ ג׏׎א‬I0! z IÁæ‫׎אٳזא׏‬³³Á

2015 JOHN DEERE 550K XLT

Stk# 14872, 185 Hrs, Cab w/Heat + AC, Hi Flow, 2 Speed, 72” Bucket

Stk# 40806, 1860 Hrs, Cab w/AC, Winch

Stk# 23755, 2978 Hrs, 18” Pads, 105” PAT Blade, ROPS Canopy w/Heater

2017 HITACHI ZX26

2014 JOHN DEERE 624K

2012 JOHN DEERE 135G

Stk# 70894, 52 Hrs, ROPS Canopy, 12” Rubber Tracks, Hyd Thumb

Stk# 23638, 1051 Hrs, Cab w/AC, 3rd Spool Hyd, Z-Bar Coupler

Stk# 23626, 2288 Hrs, Cab w/AC, 28” Triple Bar Grousers, 9’11’’ Arm

2013 JOHN DEERE 60G

‫ ח׏׎א‬á‫( ׏׏א‬R‫ דٳ‬

1995 JOHN DEERE 772BH

Stk# 23467, 2241 Hrs, 16” Rubber Track, Long Arm, 18” Bucket

Stk# 40896, 1082 Hrs, 84” Sin Drum Rllr w/Padfoot, Cab w/Heat + AC

Stk# 23839, 5748 Hrs, 17.5x25 Tires, 13’ Moldboard

2014 JOHN DEERE 130G

2013 JOHN DEERE 250GLC

2017 JOHN DEERE 470GLC

Stk# 23600, 2058 Hrs, Cab w/AC, 24” Triple Bar Grousers, 9’11” Arm

Stk# 23395, 6190 Hrs, Aux Hyd, Hyd Coupler, 32” Triple Grouser Pads

Stk# 16037, 1596 Hrs, 36” Triple Grouser Tracks, 12’10” Arm, Aux Hyd

2017 JOHN DEERE 350GLC

2017 JOHN DEERE 700K XLT

‫ א׏׎א‬h Rz (00«0 ‫׎׏ב‬³k

Stk# 15893, 2313 Hrs, Air Sus Htd Seat, 32” Triple Grouser Tracks

Stk# 15887, 755 Hrs, Cab w/Heat + AC, 22” Pads, 126” PAT Blade

Stk# 14481, 1139 Hrs, 4WD, Ext Dipperstick, Aux Hyd, Pilot Controls

45,000

128,000

80,000

CONTACT JIM TIRONE, USED EQUIPMENT MANAGER

‫׎ו׏חٳחחגٳ׎וד‬ h X x Á X « z 0 ‫ ۾‬I X à 0 ³ Á « 0 ª È X ¨ x 0 z Áِ ! x

I X à 0 ³ Á « 0 ª È X ¨ x 0 z Áِ! x DUNMORE, PA

KIRKWOOD, NY

WATERFORD, PA

ORCHARD PARK, NY

WILLIAMSPORT, PA

ROCHESTER, NY

29,000

155,000

88,000

SYRACUSE, NY

á 0 ¨ « È ( n ç « 0 ¨ « 0 ³ 0 z Á ÁR0³0 « z(³ z( x «0ٍ

45,000

153,000

19,000

80,000

85,000

270,000

àX³XÁ È« ³XÁ0 I « È¨‫ٳ‬Á ‫ٳ‬ÁR0‫ٳ‬xXzÈÁ0 Xzà0zÁ «ç

F I N A N C I N G AVA I LA B LE !

155,000

130,000

55,000

Page 22 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

REDUCED PRICES!

SAVE TIME SAVE MONEY SAVE LABOR SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

2008 Caterpillar 320DL Hydraulic Excavator

2007 Caterpillar 321C LCR Hydraulic Excavator

Auxiliary Hydraulics, Coupler, Digging Bucket, Work Ready ............................................................$69,500

Auxiliary Hydraulic, Coupler, Digging Bkt. One Owner. Well Maintained..............Reduced to $59,500

2007 Manitex 124 SX 30 Ton Boom Truck

2012 Caterpillar 336EL Hydraulic Excavator

124” Boom, 31’ Jib, 5100 Hrs, Mtd. on Sterling Truck, 22,000 Miles, Located CT..................$119,000

Aux. Hyd., Hydraulic Thumb, 42" Bkt., 12' 10" Stick. 9,000 hrs/2,772 Idling..................................$117,500

2008 Caterpillar 321D LCR Hydraulic Excavator

(4) 2001 IR 185 CFM Compressors

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

Auxiliary Hydraulics, Coupler, Digging Bucket, Approx. 7,000 Hrs ..........................................$79,500

Mounted on IH 4700 Trucks ................Call for Prices

TO VIEW OUR ENTIRE INVENTORY For more information contact Mike Pearl at 914.980.8890 or email mike@flangelock.com

www.flangelock.com

VISIT

www.equipmentmartofny.com 203/335-0100

EQUIPMENT WANTED

Fax: 203/335-7996

Answering Machine 24 Hours E-mail us at equipmart@aol.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees OFF ROAD HAULERS

COMPACTORS

CRANES

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom Hydrostatic trans 84" smooth drum, drum drive . . . . . Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 IR SD105DX, 2002, 84" drum drive, OROPS, very clean Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,

AIR COMPRESSORS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a towIR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 approx 7,000 hrs, good condition . . . . . . . .$147,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 P/S trans, working everyday on jobsites . . . .$87,500

BACKHOES

Case 580L Rubber Tire Loader Backhoe, 1997, Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 P/S trans, 26 cy, working everyday on jobsites . . . . . . (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 DRILLS work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Rammax Walk Behind Rollers, over 25 in stock, lever 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . Duraquip dust collection . . . . . . . . . . . . . . . .$125,000 & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 MISCELLANEOUS

(8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

CRAWLER TRACTORS

(2) Balderson Broom Attachment for Cat IT Machines, (2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. HYDRAULIC EXCAVATORS winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou- (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. ATTACHMENTS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500

MOTOR SCRAPERS

Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Cat 613C Water Wagon, 1994, 5000 gal drop tank, Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 (5)

Komatsu

PC128UU,

1996,

offset

boom, Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good

rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice coupler, plumbed, 8’6” width, nice, work ready . .CALL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

Volvo EC460B LC, 2003, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing good con-

TRUCKS & TRAILERS

dition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100,000 (2) 48' Box Vans w/Liftgates, Good Condition . .CALL

BUCKETS Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 24 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat Announces Partnership With QB Carson Wentz Bobcat Company officially “I love being outdoors and being on announced a three-year partnership my land with friends and family,” said agreement with Philadelphia Eagles’ Wentz. “And now, I love the fact that pro quarterback Carson Wentz. I’ve got Bobcat equipment to help me “We are excited to have such an maintain this property so we can conaccomplished and principled athlete, tinue to enjoy it for generations to who shares a deep connection to North come. I’m excited to get out and start Dakota representing our brand,” said putting this equipment to work and to Mike Ballweber, president of Doosan enter into a partnership with Bobcat.” Bobcat North America. “Carson Wentz will be featured prominently demonstrates perseverance, grit and a within marketing efforts for Bobcat, tireless work ethic both on and off the including advertising, dealership sigfield, which truly embodies Bobcat’s nage and the company’s digital and standards of performance and toughsocial media platforms. He will make ness.” appearances on behalf of the company Raised in Bismarck, N.D., Wentz as well. developed into one of the most success“With his unique combination of ful athletes in the state’s history. A star character, leadership and determinaquarterback at North Dakota State tion, we are excited to support Carson University, he was a part of five nationwith Bobcat equipment to empower al championship teams. Wentz has him to do more in his time off the experienced considerable professional Carson Wentz will be featured prominently within marketing efforts for Bobcat, including field,” said Laura Ness Owens, vice success since being a top pick in the advertising, dealership signage and the company’s digital and social media platforms. He president of marketing, communication will make appearances on behalf of the company as well. 2016 draft. and public affairs at Doosan Bobcat “I wanted to partner with Bobcat North America. “As a homeowner with knowing their values and being a North Bobcat was definitely a no-brainer for me.” tractor CT2035 and attachments and imple- acreage who enjoys working the land, he is Wentz enjoys an outdoor lifestyle on his ments to use on his land. Wentz plans to use an ideal ambassador for Bobcat’s compact Dakota-based company,” said Wentz. “They are the most trusted brand in the industry, personal properties. As part of the partner- Bobcat equipment to help with clearing veg- tractors and equipment.” and they understand who I am as a person ship, Wentz will receive a variety of compact etation, pushing snow, land grading and For more information about the Wentz and the values I have. Partnering with equipment, including a Bobcat compact moving dirt and rock on his properties. partnership with Bobcat, visit bobcat.com. 

TZC Submits Claims of About $900M Against NYSTA LAWSUIT from page 1

arate sets of responsive records and River Crossing Project. the review of documents is ongo“NYSTA has intentionally ing. The review of the documents is delayed producing the requested deemed necessary to search for records to frustrate TZC’s ability to privileged materials, trade secrets advance claims that it has made and security-related information. against respondent and is attemptThe bridge project involved the ing to resolve pursuant to the conreplacement of the old bridge with tract’s dispute resolution provia new 3.1-mile twin-span bridge sions,” the lawsuit reads. across the Hudson River between The request for specific records Rockland and Westchester counties. relating to the project was made on The $3.98 billion Governor April 12, 2018, and TZC asserts Mario M. Cuomo Bridge is one of that NYSTA continued to extend the largest single design-build conthe time to respond, then produced tracts for a transportation project in some documents in partial response the United States. Located less than on Jan. 25, 2019, and documents 20 miles north of New York City, were partially redacted. the cable-stayed span crosses one The lawsuit further states that New York State Thruway Authority photo of the widest parts of the river and TZC has submitted claims against NYSTA for approximately $900 The bridge project involved the replacement of the old bridge with a new 3.1-mile twin-span bridge is the longest bridge in New York State. million in increased costs of con- across the Hudson River between Rockland and Westchester counties. Currently, NYSTA reports that struction arising out of the project, A statement was issued by a NYSTA the Westchester-bound span is fully open to and that the “requested documents that are and a small fraction of what had been spokesperson in response to the lawsuit. traffic and features four general traffic lanes, in the possession of the respondent are requested. TZC asked the court to issue an order and “The project remains within its $3.98 bil- emergency shoulders and a dedicated bus important to the fair and timely resolution of judgment directing NYSTA to “produce all lion budget and the claim filed by the con- lane. Four traffic lanes are also operational these claims.” TZC asserts that NYSTA did not provide documents responsive to the remaining tractor is obviously nothing more than an on the Rockland-bound span, while construction continues on the bicycle/walking initial documents for almost one year, and requests within 20 days or such other time ineffective negotiating tactic,” he said. NYSTA has reportedly released five sep- path.  when it did, the documents were redacted that the court deems just.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 25

Now Is The BEST Time To Buy Bobcat Equ uipmentt.

Authorized horized Dealer

CASH ASH REBA R ATES T UP U P TO

12,000 0 6,000 0 *

ON S ON SELEC ELEC T NE NE W B BOBCA OBCA ATT C A COMP OMPAC AC T EEXCAV XCA AVA AV VA V ATOR ATOR O M MODE O DE L S

E35 Compact Excavator

T595 Compact Track Loader

U UP TO T O ON S O SELECT SE ELLEC ECT CT N NEW EW BO BOBCA OBCA BCA CA ATT C A COMP OM MP M PACT ACT AC CT TTRA TRACK RAC AC CK LO OAD ADER A DEER MO MODELS OD DELS ELLS

Use Y Yoou urr Rem emaining in niing Budg Bud udg geet wiitth t TTax Ta ax x--Yeea ar Dedu ucctiio onss,, Sectiio on 17 79 9! AUTHORIZED BOBCAT DEALER:

A L L E N T O W N • H A R R I S B U R G • M E C H A N I C S B U R G • M U N C Y • P H I L A D E L P H I A • S H I P P E N S B U R G • S TAT E C O L L E G E • T O WA N DA • W E S T C H E S T E R

1-800-679-2378 • BestLineBobcat.com • Find Us On : Bobcat® Authorizzed Dealer

*Of fer ends 12 / 31/ 2019. Available at par ticipating and eligible dealers only. Of fer may var y by product t ype, series, model and select units in dealer's current inventor y. Must take deliver y from dealer stock by 12 / 31/ 2019. Of fers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may var y. Prior purchases not eligible. See dealer for details. Financing provided on approval of credit by authorized Bobcat finance providers to well-qualified buyers. Administrative fees may apply. Of fer not available to government accounts, national accounts and municipal /utilit y bid customers. Non-commercial customers may not be eligible for low rate financing. Bobcat Company reser ves the right to ex tend or discontinue any of these programs at any time without prior notice. Bobcat® and the Bobcat logo are trademarks of Bobcat Company. Photos may not represent actual units. Dealer not responsible for t ypographical errors. 2019 Impact Adver tising • 19BL BC-NHC-CEG122519

2013 Cat D6NXL #125-16035, 3,731 hrs, Cab, air, VPAT blade, 22” Syst One, ripper ready, drawbar, Accugrade Ready, more than 3,758 hours idle time ............$139,500

2011 Cat 336EL #130-15064, 7,112 hours, cab, air, reach boom, 12ft 10in stick, aux hyd, Cat QC, fine swing control, 34” TBG, long u/c, digging bucket ......$129,500

2010 Wirtgen W2100 #155-01922, 7,845 hrs, Cat C18, crawler tracks w/poly inserts, micro drum w/HT11 tool holders, Multiplex ready, folding discharge conveyor .... ..........................$125,000 Farmington (Rochester), New York Fax: 585-924-7624 Email: jfinlon@americanequipmentllc.com

585-466-4902 www.americanequipmentllc.com

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

The SEAL SAVER WILL:

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062 Fax: 770-509-5832

1-800-683-5189

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Page 26 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLEVE ELAND B BROTHER RS USED EQUIPM MENT

2015 CAT 525D

$173,000

3789 HRS ID# UP16791

2011 CAT AP-1000D ASPHALT PAVER

2013 CAT 966K

$159,000

$195,000

5481 HRS ID# UT15919P

2013 CAT 740B WW 7044 HRS ID# UP15962

HRS $374,000 6909 ID# UP17572

2011 CAT 815F 2 SOIL COMPACTOR

2015 CAT CB64 VIBRATORY COMPACTOR

2008 CAT 328D LCR HYD. EXCAVATOR

2018 CAT 272D HF SKID STEER LOADER

$315,000

$115,000

$134,000

$53,000

5946 HRS ID# UP16804

1447 HRS ID# UP16603

For our FULL IN NVENTORY Y,, please click or call

www.Cleve elandBrothers.ccom/Used | 866-9956-8733

4969 HRS ID# UP15698

737 HRS ID# UT16795

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 27

USED

THE BEST VAL ALUE AND BE EST SELECTION OF CAT® PA ARTS & CO OMPONENTTS

PAR ARTS 2543835/86375 C-15 Industrial engine GRTO

Arm, Used, 1756353/81458, HIGH LIFT ARMS, BORES NEED MACHINED Arm, Used, 4E7522/63584, GUTO Inspected standard lift 988F arm Arm, Used, 2357301/67960, GUTO Inspected 930G Standard lift arm 2357301 Arm, Used, 1157044/68123, Good used take off arm, all bores inspected, no cracks Cat # 1157044 Standard lift Arm, Used, 1133727/73616, TAKE OFF- BEARINGS NEED REPLACED Axle, Used, 1725385/80027, Good used take out rear axle, visual inspection of diff and wheel grps Axle, Used, 1294281/80918, Good used take out rear axle, visual inspection of diff and planetary grps Axle, Used, 2327558.75, Good used take off rear 980H Axle, includes front and rear trunion mounts Inspected and painted Axle, Used, 2327559/75004, Good used take off front (fixed) axle group for 980H Inspected and painted Axle, Used, 1080060/71964, Good used take off front (fixed) axle from 980G Inspected Axle, Used, 1079680/68122, Good sued take off rear (OSC) axle from 980G Inspected Axle, Used, 1079680/68769, Good used take off rear (OSC) axle from 980G Inspected Axle, Used, 1725386/80028, Good used take off rear (OSC) axle Inspected Axle, Used, 1383121/35700, GUTO REAR AXLE GROUP, 1383121 SUITES 950G/962G/IT62G Axle, Used, 2677380/71827, Rebuilt rear axle, includes Rebearinged trunions. Part# 2677380 Axle, Used, 1079680/71963, Good used inspected rear axle. Axle, Used, 1378832/68732, Good used rear axle, inspected. No trunion support housings. Includes 1378851 diff, 1929822 wheel groups Blade, Angle, Used, 2516113/79792 Blade, Angle, Used, 3787905/84481, Used take off D6T XL Angle blade group C Frame has slight "tweak" Blade, Other, Used, 1435472/85790, GOOD USED NEEDS 263-1772 BEARINGS/TRUNNIONS Blade, SU, Used, 234000/81380 Blade, SU, Used, 2275439/87326, D8R/T SU complete blade group Blade, SU, Used, 1021904/87327, Good used take off D9T SU Blade Blade only Blade, SU, New, 2234000, New Cat D6T SU Blade Blade, U, Used, 1307751/83919, D10T U BLADE MOLDBOARD ONLY NO CUTTING EDGES, FROG IN GOOD CONDITION Booms, Used, 1679845/79926, GOOD USED TAKE OFF BOOM SUITS 345B 22.6' 6.9M NEW BEARINGS ALL BORES MACHINED TO CAT SPEC Booms, Used, 1473878/81700, GUTO 25.6' CAT # 1473878 Booms, Used, 1155417/81847, GOOD USED TAKE OFF BOOM 1155417 SUITS 5230 Booms, Used, 2444155/88289, GOOD USED 24' 7.3 M MASS EX Booms, Used, 5I3412/54544, GUTO BOOM 4300 mm / 14.1 ft SUITES 311/312 Booms, Used, 2343799/50540, Good used take off 242" ( 6150mm / 20.17') Reach Boom Booms, Used, MS3194, LONG REACH BOOM & STICK FOR 320 USED CALL FOR DETAILS Bucket, GP, New, 3719068/84744, NEW CAT BARE DB LINK 60" SD Bucket, GP, Used, 1098156/78252, QUICK COUPLER STYLE BUCKET BUCKET ONLY DOES NOT INCLUDE QUICK COUPLER GOOD USED 2.25 CY3 Bucket, GP, Used, 1098156/78252, GOOD USED 953D QUICK COUPLER STYLE BUCKET Bucket, Other, New, THSB/56740NEW TOMAHAWK BRAND STUMP BUCKET, SUITS MOST ALL BRANDS OF SKID STEERS Bucket, Other, Used, BU3844, Rockland Brand Trapezoidal bucket 60" on top, 24" on bottom Model ETZ 1.57 CY3 Very good used Bucket, Rock, Used, 5V5601/60577, REPAIRED AS NEEDED Cab, EROPS, Used, 1726070/81852, Good used 5230 Cab grp Cab, EROPS, Used, 2521415/86445GUTO CAB MEETS ROPS RE CERTIFICATION GUIDELINES REPAIRED AS REQUIRED Cab, EROPS, Used, 1674447/73254, Good used take off 777D CAB Cab, EROPS, Used, 1535485/85332, Good used take off Cab suits AXM Prefix Cab, EROPS, Used, 1535485/81904, COMPLETE CAB GRP PAINT IS FAIR- NEEDS PAINTED SUITS 740 AXMCab, EROPS, Used, 1535485/81920, GUTO PAINT IS FAIR- NEEDS PAINTED SUITS 740 AXMCab, EROPS, Used, 1794221/67953, GUTO CAB SUITS 980G Cab, EROPS, Used, 1532915/86222, GOOD USED TAKE OFF 365BL CAB Cab, EROPS, Used, 1573739/79847, Good used take off cab # 1573739 Cab, EROPS, Used, 3T8106/36149, EROPS Cab, recondtioned suits D10 84W Cab, EROPS, Used, 1118549/50331, GOOD USED TAKE OFF CAB GRP FITS D9R/D10R/D11R Cab, EROPS, Used, 7U4400/40232, GOOD USED D350E CAB 7U4400 Cab, EROPS, Used, 1097922/65276, Good used take off cab, inspected Fits 980G 2KR PART# 1097922 Cab, EROPS, Used, 1276516/75461, GUTO CAB Glass needs replaced, sold as is

CLEVELAND BR ROTHERS PROVIDES ALL YOUR Y USED PARTS AND EQUIPMENT QUIPMENT NEEDS

1356158/87486 D6M LGP Final drives Rebuilt

Cab, EROPS, Used, 1674447/74762, GUTO VERY CLEAN CAB 1253367 DASH PANEL CRACKED MONITOR PANEL BAD INSPECTED FOR MSHA RE-CERT Cab, ROPS, Used, 1118549/69078, Good used D10R Cab C-Frame, Used, 3341767/66973, Like new take off C Frame assembly Counterweight, Used, 3672332/84079, NEW CAT SURPLUS 1000 LB COUNTERWEIGHT CAT PART# 367-2332 Counterweight, Used, 3672331/84078, NEW CAT SURPLUS CAT# 3672331 1000 LBS Counterweight, Used, 2173654/88352, GOOD USED TAKE OFF 4515 LBS 47.5" X 32.5" X 32" Counterweight, Used, 1146030/65810, 2300 LB Counterweight fits 980G 2KR Counterweight, Used, 3374888/62291, Good used take off Counterweight 7385 LBS Counterweight, Used, MS2271, 705 LB Counterweight Cat # 3745858 Take off Coupler / Quick Coupler, New, 3371952/85091, NEW CAT HPL INTERFACE QUICK COUPLER KIT Coupler / Quick Coupler, Used, 4447496/86130, Like new take off manual quick coupler Cat # 444-7496 Coupler / Quick Coupler, New, QCCAT312/85372, New Teran brand manual quick coupler Coupler / Quick Coupler, Used, 312QC/84850, New Aim brand hydraulic quick coupler 65 MM Pin 312 "A" linkage Coupler / Quick Coupler, Used, 2924151/85781, Good used take off "B" linkage pin grabber quick coupler Coupler / Quick Coupler, Used, 3498040/87455, New Take Off Fusion style quick coupler # 349-8040 Coupler / Quick Coupler, Used, 3518749/84994, Good used take off 312E Quick coupler, hydraulic Coupler / Quick Coupler, Used, 1608289/85782, Good used take off "D" Linkage pin grabber quick coupler Coupler / Quick Coupler, Used, 3880067/88365, Like new "B" Linkage family pin grabber quick coupler. Includes (1) set of pins # 388-0067 Coupler / Quick Coupler, New, 315QCR/77451, New Rockland Brand pin grabber Hydraulic quick coupler Pins have some surface rust Fits 315/315B/315C/315D Coupler / Quick Coupler, Used, 2225002/79304, LOW HOUR TAKE OFF HPL STYLE QUICK COUPLER Coupler / Quick Coupler, Used, 1766247/79305, GUTO MECHANICAL QUICK COUPLER MISSING 132-3821 LEVER Coupler / Quick Coupler, Used, 938GCPLR/81242, JRB BRAND GUTO HORIZONTAL PIN LOCK STYLE ( HPL) S/N# 0804-135147-1 ALL CRACKS REPAIRED Coupler / Quick Coupler, Used, 1715954/85239, Good used take off pin grabber quick coupler for "D" linkage family Coupler / Quick Coupler, Used, 3611096/85426, GOOD USED MANUAL DUAL LOCK PIN GRABBER Coupler / Quick Coupler, Used, QC303/87845, GOOD USED WAIN ROY STYLE QUICK COUPLER, MANUAL WOODS EQUIPMENT BRAND Coupler / Quick Coupler, Used, 3880067/88365, Very good used pin grabber quick coupler suits "B" linkage family Coupler / Quick Coupler, New, 1608296/88374, NEW CAT SURPLUS PINS HAVE SURFACE RUST DEDICATED WEDGE LOCK COUPLER Coupler / Quick Coupler, Used, 3336550/58732, NEW TAKE OFF FUSION STYLE QUICK COUPLER Coupler / Quick Coupler, Used, CU880, Hydraulic quick coupler ISO/VOLVO Designed to pick up Volvo interface quick coupler attachments. Coupler / Quick Coupler, Used, BRK886, Used IT Coupler hook used only on a Cat SA30 Broom Cat # 2675693 Cylinder, Boom/Lift, Used, 1393788/72191, Good used polished rod fits front shovel boom lift cylinder 121-8909 Rod part # 1393788 Cylinder, Crowd, built, 1270865/70942, Rebuilt stick cylinder Cylinder, Crowd, Used, 1131924/81850, GUTO Stick cylinders suit 5230 Differential, Used, 3880373/81221, GOOD USED INSPECTED FRONT DIFFERENTIAL Differential, Rebuilt, 1367631/55993, Rebuilt 836C diff, no spin Engine, Used, 1006339/81853, Good running take out 5230 engine Aprox 10,000 hours on engine Includes 6I7652 & 6I761 Encloser Engine, Rebuilt, 1537076/85601, REBUILT SOLD OUTRIGHT Does not include alternator, hyd pumps, a/c compressor or transmission and brake coolers. Engine, Used, 1430037/85330, Good running take out Replaced R/M bearings, new injectors, resealed oil leaks, replace F/R crank seals. Dyno tested. Engine, Rebuilt, 1056574/82445, Rebuilt engine with mixed parts Engine, Used, 1537076/81828, GUTO R/M BEARINGS REPLACED REMAN OIL PUMP DYNOTESTED 90 DAY MAJOR FAILURE WARRANTY ONLY BLOCK, CRANK AND HEAD Engine, Rebuilt, 6I3528/82440, Rebuilt with mixed parts Suits 963b Engine, Used, 2354678/80574, GRTO 3406E APROX 8,500 SMU ON ENGINE ROD/MAIN BEARINGS REPLACED OIL PUMP REBUILT OVERHEAD RAN DYNO TESTED 90 DAY MAJOR FAILURE WARRANTY ONLY CYL BLOCK, CRANK AND CYL HEAD Engine, Used, 1482061/86400, GRTO 3196 INSTALLED NEW ROD/MAIN BEARINGS REMAIN OIL PUMP ADJUSTED VALVES 90 DAY WARRANTY MAJOR FAILURE ONLY BLOCK CRANK HEAD Engine, Used, 3094421/86216, GUTO C7 NEW OIL PUMP, ROD MAIN

1728568/81312 924GZ 2.5 CY3 Bucket

BEARINGS, NEW STARTER ADJ OVERHEAD, DYNO TEST 90 MAJOR FAILURE WARRANTY ONLY BLOCK CRANK HEAD Engine, Used, 1986489/80340GRTO S/N# BNT01198 ROD / MAINS AND OIL PUMP REPLACED DYNO TESTED 90 DAY MAJOR FAILURE WARRANTY ONLY Engine, Used, 2083027/84666, Rebuilt all Cat parts sold exchange core required Engine, Rebuilt, 8N9602/83263, REBUILT LONG BLOCK PLUS ALL CAT PARTS CORE REQUIRED Engine, Rebuilt, 2225432/81554, REBUILT LONG BLOCK CORE REQUIRED INCLUDES REMAN OIL PUMP & OIL COOLER Engine, Used, 1430029/75399, Rebuilt short block all Cat parts Sold outright Engine, Rebuilt, 3015768/87386, Rebuilt C9 Engine suits D6T LGP All Cat Parts, dyno tested Sold exchange Engine, Used, 1074935/88269, GRTO 3116 Engine 3250 hours since rebuild Rod/ Main bearings replaced std/std Oil pump replaced with reman overhead ran, dyno tested. Dyno test result available. 90 day major failure warranty sold outright Engine, Used, 1730355/87319, GRTO ROD/MAN BEARINGS, REMAN OIL PUMP INSTALLED OVERHEAD RAN, DYNO TESTED Engine, Rebuilt, 1537076/85309, Rebuilt 3406E Engine for 740 AXM1SOLD OUTRIGHT . Does not include alternator, hyd pumps, a/c compressor or transmission and brake coolers. Engine, Used, 2250992/81446, GRTO ROD/MAIN BEARINGS, OIL PUMP REPLACED ADJUST OVERHEAD DYNO TEST Engine, Used, 1382001/37356, Good running take out 3176 engine, suits 345B. Rod / main bearings replaced, new oil pump, water pump and turbo. Dyno tested: results available. Engine, Rebuilt, 7E9078/36720, REBUILT 777C ENGINE ALL CAT PARTS Engine, Rebuilt, 2250992/55693, REBUILT LONG BLOCK PLUS CORE REQUIRED, SOLD EXCHANGE Engine, Used, 1981441/72823, Rebuilt exchange Engine, Used, 3452887/77187, Low hour GRTO Rod / main bearings replaced pistons re-ringed dyno tested Equalizer Bars, Used, 2223676/84543, Rebuilt E-Bar Sold exchange Equalizer Bars, Rebuilt, 1414690/28344, REBUILT D7H equalizer bar. We do not use e-bars that have cracked / failed in the center bore. Final Drive, Used, 2676824/85814, Good used take off, inspected does not include sprocket Final Drive, Used, 6i7521/81857, GUTO INCLUDES: 1082721 LH TRACK FRAME 6I7547 TCR GRP 6I7548 SF ROLLER GRP 1221804 TRACK GRP Final Drive, Used, 6i7521/81858, GUTO INCLUDES: 1082728 RH TRACK FRAME 6I7547 TCR GRP 6I7548 SF ROLLER GRP 1221804 TRACK GRP Final Drive, Used, 3W6494/77620, RESEALED. SPROCKET FLANGES HAVE BEEN REPAIRED TO CAT SPEC NO SPROCKET SEGMENTS INCLUDED 90 DAY WARRANTY Final Drive, Used, 1Q3054/81825, Good used take off, inspected. No sprocket groups included Fits D8N LGP ONLY! Final Drive, Rebuilt, 1356158/87486, REBUILT D6M 4JN FINAL DRIVES NO SPROCKET GROUP SOLD REBUILT EXCHANGE ALL CAT PARTS Final Drive, Used, 5183389/87758, Like new take off final drive, right hand, no travel motor Cat # 5183389 Final Drive, Used, 1362956/86397, GOOD USED INSPECTED FINAL DRIVE, DOES NOT INCLUDE SPROCKET CAT# 136-2956 Final Drive, Rebuilt, 1384810/82685, Rebearinged and resealed, brakes worn 7% Sold outright Final Drive, Rebuilt, 1384810/82686, Rebearinged and resealed, brakes worn 9% sold outright Final Drive, Rebuilt, 1268347/68251, REBUILT, SOLD EXCHANGE ALL CAT PARTS # 1268347 Final Drive, Used, 3254665/79379, Rear wheel grp - good used inspected take off sold exchange Cat # 325-4665 Final Drive, Used, 9U3022/69724, PLANETARY GEARS INSPECTED GOOD INCLUDES 9U2856 BRAKE GRP GUTO Final Drive, Rebuilt, 1384810/85329, Rebuilt with all Cat parts Sold outright no core required Final Drive, Rebuilt, 1384810/81861, REBUILT ALL CAT PARTS SOLD EXCHANGE Final Drive, Rebuilt, 1416054/81859, REBUILT ALL CAT PARTS SOLD EXCHANGE Final Drive, Used, 1384810/81163, CHECKED AND INSPECTED WITH BRAKE GP Final Drive, Used, 2327554/81217, GUTO VISUAL INSPECTION OF PLANETARY GEARS Final Drive, Rebuilt, 1362847, Rebuilt final drive, without motor suits 345B Part # 136-2847 Final Drive, Rebuilt, 1605585/8037, Rebuilt 980G Wheel groups Final Drive, Rebuilt, 1141488/61170, REBUILT FINAL DRIVE, INCLUDES REBUILT TRAVEL MOTOR 1141488 Final Drive, New, 3715138, New Cat 980M/980K Wheel groups 3715138 Grapple, GP, Used, 2756075/79396, Good used take off G125B Contractors Grapple Complete with pins and mounting plate Grapple, Log, Used, 18205005/81608, GUTO JD135 LOG GRAPPLE BUILTRITE BRAND MODEL 18205005 SERIAL # NS6296 Other, Used, 2190426/81797, Like new Cat LT18B Tiller Other, New, 2518303/53371, New Cat VERS-A-MAT AS2302 Front

Mount Screed *electric screed plates 10' width Other, Used, 1554102/32845, New Cat 5130 Rollers Part# 1554102/32845 Other, Used, 1072940/326, Good used H link for 5130 Mass Ex. Other, Rebuilt, 8E5273/38926, Rebuilt brake and steering clutch from D6R LGP Part# 8E5273 Rebuilt Other, Used, MS1452, GOMACO CURB AND GUTTER MOLD Ripper, Used, 2244449/84324, GUTO D6T Ripper Ripper, Used, 2567612/88235, Good used take off 953D / 953C/ 953K Ripper Ripper, New, RIPPER320/88294, NEW TERAN BRAND B LINKAGE FROST RIPPER Ripper, New, RIPPER312/88293, NEW TERAN BRAND FROST RIPPER "A" LINKAGE 65 MM PINS Ripper, New, RIPPER336D/84965, NEW TERAAN BRAND FROST RIPPER "DB" LINKAGE Ripper, New, RIPPER315/84963, NEW TERAN BRAND FROST RIPPER 70 MM PINS WILL NOT FIT 315F! Ripper, Used, 2156422/80436, Good used take off single shank ripper for D8T Shears, Steel, Rebuilt, S385C, Rebuilt S385C Shear Stick, Used, 3671522/86775, Low hour take off 12' 8" DB linkage stick includes Linkage Group 236-8415 & bucket cylinder 357-9766 Stick, Used, 1117637/1699, Good used take off medium stick part # 1117637 new nose bearing & dirt seals Stick, Used, 2847105/63045, GOOD USED 9' 2" 314DLCR Stick Stick, Used, 1152624/75445, TAKE OFF NEEDS LINE BORED AND BUCKET PIN BORES FACED. LINKAGE BEARINGS NEED REPLACED DENTED FROM H LINK STRICKING STICK HAS NPK BRACKETS 10.5 C LINK Stick, Used, 2045969/81742, GUTO BARE 10.5' D LINKAGE Stick, Used, 3671534/86437, GOOD USED 10.5' DB LINK STICK Stick, Used, 1663633/72360, TAKE OFF 3.9M NO VISIBLE CRACKS NEEDS BEARINGS AND FACED FACE SPREAD 430MM ( SPEC 441MM) STICK CYL BORE 3.940" (SPEC 3.938 +/- .0017) BUCKET CYL BORE 3.551" ( SPEC 3.544 +/- .0017") Stick, Used, 1583998/81699, GUTO 15,3' V LINKAGE INCLUDES BUCKET CYL 143-8004 H LINKAGE GRP 141-3775 Stick, Used, 2977329/85178, Good used take off 15.3' VB Linkage # 297-7329 Stick, New, 2062511/27571, NEW CAT 5110 B STICK 4.5M 14.76' Hoe style Stick, Used, 2512502/86395, JB LINK 9.5' Stick usable as is, no cracks no line bore repairs needed sold as is- stick currently has used bearings and seals Swing Drive, Rebuilt, 1994539/84024, Rebuilt swing drive, all Cat parts Swing Drive, Used, 1362888/86225, Good used take off, inspected left hand Swing Drive, Used, 6i7233/81268, TAKEOFF CLEANED AND PAINTED INC 110-6198 BRAKE GP 122-8068 MOTOR Swing Drive, Used, 1695530/88280, GOOD USED TAKE OFF SWING DRIVE, LEFT HAND INSPECTED Swing Drive, Used, 1695532/88279, Good used take off right hand swing drive No motor Swing Drive, Used, 7I7761/57080, Take off swing drive, inspected and resealed. Includes 7I8627 Swing motor, motor is used and not inspected. Swing Drive, Rebuilt, 1141305/32317, REBUILT 330B SWING DRIVE Tires, Used, 1190551/84830(2) TIRE AND RIMS ASSM. SOLD ONLY AS A SET Firestone Super All Traction 23.1-26 Tires Rated R1 Average tread remaining 48/32" ( new spec 52/32") Mounted on rim 6R4385 Torque Converters, Rebuilt, 2657360/82418, REBUILT EXCHANGE CORE REQUIRED COMPATIBLE WITH 188-0502 TORQUE STEERING PUMP MOUNTING IS 6 BOLT Torque Converters, Rebuilt, 1081427/77674, REBUILT , CORE REQUIRED INCLUDES OUTLET RELIEF Torque Converters, Rebuilt, 3t5832/85945, Rebuilt, all Cat parts Torque Converters, Rebuilt, 1173357/82847, REBUILT EXCHANGE CORE REQUIRED CORE MUST BE COMPLETE AND ASSEMBLED Torque Converters, Rebuilt, 1613306/65014, Rebuilt all Cat Parts Sold Exchange Torque Converters, Rebuilt, 1061711/87248, Rebuilt D6M Torque convertor Torque Converters, Rebuilt, 6P6412/31183, Rebuilt D10 84W Torque part # 6P6412 Torque Converters, Rebuilt, 1431234/56095, Rebuilt, all Cat parts, Torque converter to fit 824B/836/836C Torque Converters, Rebuilt, 1285303/52676, Rebuilt 988H Torque Convertor part# 128-5303 Sold exchanage Torque Converters, Used, 6T4674/42945, Rebuilt Torque convertor part# 6T4674 Suits 773B Torque Converters, Rebuilt, 1102769/35220, Rebuilt torque converter, suits D10R Cat# 110-2769 Torque Converters, Used, 1210030/47691, Good used inspected D11R/T Torque converter # 121-0030 Torque Converters, Core, 1103391/71477, CORE ONLY REMOVED FROM MACHINE THAT SUFFERED TRANS FAILURE NEEDS CLEANED OUT / RESEALED SOLD AS IS Torque Converters, Core, 1210028/59566, CORE ONLY Torque only, no cover Torque has been disassembled and inspected reassembled loosely, cannot be installed in machine as is all parts guaranteed to meet Cat reusability guidelines

WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.855.545.0267 ext. 2

Just salvaged ! D6M LGP 4JN Torque Converters, Rebuilt, 1613306/65016, REBUILT EXCHANGE Torque Converters, Rebuilt, 8E7009/64425, REBUILT EXCHANGE Transmissions, Used, 1466225/81831, Good used take out 740 AXM transmission air tested clutches, filter and screen clean Transmissions, Rebuilt, 1466225/81905, Rebuilt all Cat parts 740 AXM Transmission Transmissions, Used, 1466225/85600, Good used 740 AXM Transmission Air tested clutches, screen and filter clean Transmissions, Used, 1466225/85682, Good used take out 740 AXM transmission Air tested clutches, filter and screen clean Transmissions, Rebuilt, 3T0034/82848, REBUILT 785C TRANSMISSION SOLD EXCHANGE Transmissions, Used, 1066452.863REPAIRED AS NEEDED RESEALED NEW CLUTCH PLATES AND MODULATING VALVES DYNO TESTED SOLD OUTRIGHT Transmissions, Used, 6y6965/79174, GRTO AIR TESTED OK FILTER AND SCREEN CHECKED- CLEAN LIFTING EYE BOLT HOLE ON MAIN CASE WAS CRACKED- WELDED CUSTOMER SHOULD BE AWARE BEFORE INSTALLING! Transmissions, Used, 3P7556/31378, REBUILT TRANSMISSION ALL CAT PARTS NO BEVEL GEAR! Transmissions, Rebuilt, 1109296/81701, Rebuilt all Cat parts Transmissions, Rebuilt, 8E4565/86525, Rebuilt all Cat parts Transmissions, Rebuilt, 1466225/79441, Rebuilt transmission all Cat Parts Fits 740 AXM1Transmissions, Used, 2348866/69055GRTO INSPECTED CLUTCHES ACTUATE WITH AIR PRESSURE SUCTION AND MAGNETIC SCREENS ARE CLEAN NEW TORQUE FLEX PLATES INSTALLED NEW TRANS WIRING HARNESS INSTALLED Transmissions, Rebuilt, 1085655/87448, Rebuilt all Cat parts, sold exchange Transmissions, Rebuilt, 9W0782/32318, Rebuilt 988B 50W Transmission, part # 9W0782. All Cat parts Transmissions, Used, 2348866/32134, 500 hour take out, dyno tested ( dyno results available) Part# 2348866 fits 938G Transmissions, Used, 9M8300/42387, Resealed, new clutch plates installed part# 9M8300 Transmissions, Rebuilt, 1402772/57646, REBUILT 924G TRANSMISSION SOLD EXCHNAGE Transmissions, Used, 1164860/74079, GRTO AIR TESTED CLUTCH PACKS- OK Transmissions, Used, 2372331/80168, 2372331 REBUILT 972H TRANSMISSION Truck Components - Engine, Rebuilt, 4P2834/82441, S/N# 2BK03037 REBUILT LONG BLOCK MIXED PARTS 170 BHP @ 2600 RPM SOLD OUTRIGHT NO FUEL SYSTEM Undercarriage, Rollers, Used, 1205766/77277, QTY 2 DOUBLE FLANGE ROLLERS WORN 50% AS IS Undercarriage, Rollers, Used, 4288691, PACKAGE 1 CONSIST OF 18 ROLLERS 5-10 % WORN. AS IS TAKE OFF PART NUMBER 4288691 Undercarriage, Rollers, Used, 4288691B, GOOD USED TAKE OFF 1 LOT CONSISTING OF 18 ROLLERS WORN 10-15% AS IS FROM ZIP 16823 Undercarriage, Sprocket, New, 09110008/49695, 2 NEW Trek sprockets fit ec210blc volvo Undercarriage, Sprocket, Used, 09110013/49693, NEW TREK BRAND SPROCKET EC360BLC VOLVO Undercarriage, Track Frame, Used, 3041894, GOOD USED TAKE OFF SINGLE FLANGE IDLERS PALLET OF 2 PCS AS IS Undercarriage, Track Frame, Used, 9G6752/1834, REAR FRAME D9L AS IS 9G6752 Undercarriage, Track Frame, Rebuilt, 6Y2686/54865REBUILT R/H TRACK FRAME, INCLUDES SUSPENSION GROUP, UPDATED TO THREE BOLT MAJORS NO ROLLING STOCK 6Y2686- R/H FRAME Undercarriage, Track Frame, Rebuilt, 6Y2687/54866REBUILT L/H TRACK FRAME, INCLUDES SUSPENSION GROUP, UPDATED TO THREE BOLT MAJORS NO ROLLING STOCK 6Y2687- L/H FRAME Undercarriage, Track Frame, Rebuilt, 9W6491/66669, Rebuilt RIGHT HAND D8R Track frames, includes Idlers 0-24% worn, rollers 20-30% worn Undercarriage, Track Pads / Shoes, Used, 3105825/75526, Other CATERPILLAR D11N/R/T 3105825/75526 (78) 32 INCH TRACK SHOES 50% WORN AS IS Wheels, Rebuilt, 8X2633/68103, REBUILT WHEEL # 8X2633 SOLD EXCHANGE Wheels, Used, 6G6563/69448, GOOD USED TAKE OFF, INSPECTED Wheels, Used, 2G5003/51381, GOOD USED INSPECTED Wheels, Used, 9V1290/84523, GOOD USED TAKE OFF INSPECTED Wheels, Used, 6G8241/3040, GOOD USED TAKE OFF Winch, Rebuilt, 2563738/83931, Rebuilt PA40 winch- suits D5K & D5K2 2563738 Winch, Used, 09056/88066, Good used H70VS Winch to suit D6R Inspected and tested no winch cable Winch, Used, 2641077/81746, Good used PA55 Winch for D6N Winch, Rebuilt, 1208907/83792, REBUILT PA56 WINCH INCLUDES CABLE CONTROLS Winch, New, WN363, CAARCO 50B STANDARD SPEED WINCH ( Equivalent to Cat PA55) For D6N Tier III Winch, New, WN411, PA90 Winch with mounting brackets, lines and controls Suits D7E

Page 28 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cobra Screening Buckets

Gyru-Star Screening Buckets

1 Tidland Road • P.O. Box 188 Oak Ridge, NJ 07438 (973) 697-0900

• New & Used Construction Equipment Sales • Used Construction Equipment Purchases • Importing/Exporting (Shop & Yard located 50 miles from Port Newark) • Construction Equipment Appraisals

• Construction Equipment Rentals • Daily / Weekly / Monthly • Delivery & Pickup Available

• Screening and sorting materials for recycling • Composting, aerating green waste • Recycling and handling of top soil and dirt • Recycling of demolition waste • Pipeline and cable trench padding and back-filling • Preparing topsoil for landscaping • Screening peat and mulch • Mixing different materials • Crushing, screening and grinding industrial raw materials • Crushing and screening frozen materials

• Built for Compact Machinery • Separate stone/soil/vegetation • Effectively screen wet soil / mulch / compost • Mix and blend materials / Compost production • Aerate materials to aid drying • Pipe bedding • Flexible poly stars create a fast and efficient self cleaning screening action without crushing or shredding • Manufactured using high grade and Hardox steel for maximum durability

Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA

NEW 2019 MORBARK 3400XT WOOD HOG • New Construction Equipment Attachment Sales • Used Construction Equipment Attachment Sales • Used Construction Equipment Attachment Purchases

• Mechanical & Hydraulic Repairs • Welding and Fabricating • Computer Diagnostics • Steam Cleaning • Sand Blasting • Sheet Metal Repair & Fabrication

• New Non-OEM Construction Equipment Parts Sales • Remanufactured Construction Equipment Parts Sales • Used Parts Sales • Construction Equipiment Purchases for Dismantling

• Painting • Glass Replacement • Seat & Upholstery Repair & Replacement • Tire Replacement • Loading Containers • Pick up & Delivery

CAT 800 HP, C18, Tier 4F Electric Diesel engine, Magnetized end pulley, 320L CAT Undercarriage Call For Price Exclusive Morbark and Rayco Dealer

Visit: www.deaconequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 29

PINE BUSH EQUIPMENT EAST PBE

Anderson Equipment Company Location: Western PA, NY, NH, ME Tel: (412) 343 2300 www.andersonequip.com

ATS Equipment Inc. Location: MA, NH Tel: (800) 491-8565 www.atsequipment.com

Best Line Equipment Location: Eastern PA Tel: (800) 679 2378 www.bestline.com

JESCO, Inc. Location: NJ, MD, DE Tel: (908) 753 8080 www.jesco.us

East PBE Location: CT Tel: (860) 665 7470 www.pbeind.com Pine Bush Equipment Co. Location: NY Tel: (845) 744 2006 www.pbeinc.com

Page 30 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

1361 Conshohocken Rd., Plymouth Meeting, PA 19462

(610) 277-0100 USED TRUCK & EQUIPMENT SALES

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT

2012 Chev 3500, 4x4, L Gate, 12’ 2012 Case 580N, 4x4, Ext, 3323 Hrs .. Bed, 32,565-Miles ..................$24,500 ..................................................$42,900

Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas:

Project Managers and Superintendents Project Sales Engineer Controls and Project Engineering Estimating Service and Project Sales Construction Manager

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 Wayne, PA 19087

Call Today: 610-941-0100 Email: info@magellangroup.com

www.magellangroup.com

2013 Chev 2500 Cargo Van ..$13,900 2013 Peterbilt 18 Ton Altec Crane, 31,660 Miles ..........................$126,500

40 LANDINGS DRIVE ANNVILLE, PA 17003

NOW HIR

ING

(717) 838-4800

7800 LINGLESTOWN ROAD HARRISBURG, PA 17112 WE N SPIDER POW DO LATES!!

(717) 395-5730

1/4 the Cost of a New Housing and Less Down Time!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 31

GET IT RIGHT R THE FIRST TIM M ME

EVE ERYT YTIME E GAIN IMPROV VED EFFICIENCY AN ND PRODUCTIVITY FROM YOUR CURRENT C EQUIPMEN NT AND OPERATOR T RS S. Yo our Northeastern n SITECH Dealer is your Auth horized Trimble and AccuGrade Machin ne Control & Guidance provvider. They are a one-stop technology solutio on provider for a contractorr’s entire fleet of heavy equipment regardless of machine brand.

SIITECH S SITECH TE ECH EC E CH Nor No N orth he hea h ea as stt

S ITECH EC CH Met M ettro oNo N o th or the eas st S ECH SITEC Allleg A eg ghen g h hen ny

These include 2D and a 3D grade-control, pavin ng control, site positioning, constrruction asset management and a marine construction systems as well as supporting infrastructure a systems, and data prep solutions. solutions

Yo our Constructtion Te echnology Provid der SITECH NORTHEAST MA, ME, NH, VT T,, RI, RII, Upstate NY 855-748-3244 SITECH METRO NO ORTHEAST T,, LLC CT T,, Lower NY Y,, NJ, Northern N DE, Eastern P PA A 855-748-3241

www.SITECH-LOCA AT TO OR.com

SITECH ALLEGHENY NE, Central and Westerrn P PA, A, Northern WV 855-417-0290

Page 32 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ECCO III Enterprises Leads ‘Last Mile’ Work on Thruway New York State Thruway Authority photo

New York State Thruway Authority photo

A Volvo 235 with hydraulic hammer attachment breaks up blasted rock while a Volvo 460 loads it into a Mack tri-axle dump.

THRUWAY from page 1

gratifying. “The New York State Thruway Authority prides itself on the quality and safety of its roadway. This was a long-anticipated and needed project for the Thruway Authority, as well as motorists who travel this section of I-95, and the surrounding community. “After years of discussions and planning, we moved forward with the project in 2018 with the start of construction. This is a critical infrastructure project that will provide safety, mobility improvements and quality of life components supporting New York’s growing economic, transportation and community needs.” ECCO III Enterprises Inc. from Yonkers, N.Y., serves as the general contractor. The project was designed to align with Gov. Cuomo’s Drivers First Initiative, to ensure construction will have the least possible impact on motorists. “Work is being completed in stages, with lanes maintained to accommodate traffic volume demand and minimize disruptions,” said Lee. “During construction, motorists can expect traffic shifts, detours and temporary traffic stops. Motorists are urged to be alert and follow the posted work zone speed limits. “The Thruway Authority has worked extensively with the community over several years to discuss the project. Feedback received from the community was integral in making adjustments to the design, such as the addition of the visual barrier and maintaining one lane of traffic on the Grace Church Street Bridge through construction. The Thruway Authority developed a website dedicated to this project and has remained available to provide information and answer questions from community members and motorists throughout the project.” Lee noted that projects of this magnitude are not entered into lightly. “It requires extensive planning with community members, municipal offices, utility providers and emergency responders. The surrounding vicinity is densely populated, and we were very focused on trying to mitigate the impact on residents as much as possible. “Designing this project was complex because of the extent of improvements being made in this corridor, such as realigning the ramp from Midland Avenue to go under I-287. As with all Thruway projects, the goal is for motorists to appreciate and enjoy the finished product.” Lee added, “When this project is complete, motorists will experience improved travel and safety in this area with the reconstruction of the mainline, which includes safety upgrades such as wider shoulders, updated pavement mark-

New York State Thruway Authority photo

A remote-controlled Comacchio MC28 drills micropiles to support a new bridge footing.

Construction is expected to be completed in 2021. New York State Thruway Authority photo

Ironworkers prepare a section of a temporary bridge structure, which will be pushed into place by a Komatsu D155 dozer.

ings and the installation of guiderails and barriers. Ramp upgrades, bridge replacement and rehabilitation, as well as the installation of noise walls and visual barriers, will enhance safety for motorists and improve the quality of life for residents.” Christopher Terrizzi, Thruway Authority construction project supervisor, said safety during construction is paramount. “That means ensuring safe travel for motorists with advance notice of shifting traffic or road closures and safety to the workers who are, in some cases, inches away from motorists driving by. The challenge is to pay attention, drive safely and to slow down and move over.” The elements can affect the project schedule, as the contractor cannot close any lanes of I-95 and/or I-287 to complete work. Additionally, there is limited concrete and backfill work during rain events and freezing temperatures.

“We have northeast weather to contend with, meaning cold snowy winters and often rainy spring and summers that can impact when stages of the project are accomplished. Because of the scope and scale of the project, staging, schedules and availability of specific machinery are linked together into what we hope to be a seamlessly coordinated ballet of worker, machine and material. “If any aspect of that choreography is disrupted, the challenge is being able to move forward without missing a beat. Finally, as this is one of the busiest corridors on the East Coast, lane reductions are not simple to undertake, and when done, are during limited hours to avoid impacting rush hours.” Since construction got under way, several areas of the project have been completed, including one half of the Grace Church Street Bridge replacement project over I-95. Workers have also finished the installation of a prefabricated temporary bridge for use while the I-287 bridge to northbound I-95 is demolished and reconstructed. A noise wall also has been put in place along the northbound I-95 corridor from Midland Avenue to Grace Church Street, as has a 48 in. diameter storm drain crossing I-95. A significant amount of paving also has taken place. As for the condition of the site before work began, said Terrizzi, “This section of I-95 was original to the construction of the Thruway, dating back to the 1950s. This project will bring this section of the Thruway up to current standards, while improving conditions that were frustrating to motorists, specifically the ramp from I-287 to I-95 northbound, and eliminating a stop sign for motorists entering I-95 northbound from Midland Avenue. see THRUWAY page 98

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 33

Page 34 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GREAT HOLIDAY GIFTS! Vogele Super 1900-3 Tracked Paver, 1:50 scale - $125

Terex 72-71 Wheel Loader, GMC Green, 1:43 scale - $175

Caterpillar 950K Wheel Loader, 1:50 scale - $75

All New in Box

Bucyrus Erie 22B Dragline, 1:50 scale ....................................$285 International TD-25 Dozer, 1:25 scale ......................................$200

Kenworth T880 w/Tri-axle Lowboy, 1:50 scale - $100

Liebherr L522 Wheel Loader, 1:50 scale....................................$60 Caterpillar 12G Motor Grader, 1:50 scale ..................................$60

International TD-25 Dozer, White Demo, 1:25 scale ..............$200

Caterpillar AP600D Asphalt Paver, 1:50 scale ..........................$50

Caterpillar D4 Tractor w/LeTourneau Hyster winch, 1:16 scale ....

Case Stieger 485HD Dual Wheeled Tractor, 1:50 scale ..........$50

CALL Toll Free

........................................................................................................$180

Kawasaki 90Z IV Wheel Loader, 1:48 scale ..............................$50

800-523-2200

P&H Omega Rough Terrain Crane, 1:50 scale ......................$175

Caterpillar V-50D Lift Truck, 1:25 scale ......................................$50

Terex 72-71 Wheel Loader, GMC Green, 1:43 scale ..............$175

Komatsu WA350 Wheel Loader, 1:50 scale ..............................$50

Demag H185 Blue/White Shovel, 1:50 scale ..........................$150

Volvo BM L160 Wheel Loader on Tractor Trailer, 1:50 scale $50

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale ..$150

JCB 467 Articulated Front End Loader, 1:50 scale..................$90

Caterpillar 623G Elevating Scraper, 1:50 scale ........................$45

Vogel Super 1900-3 Tracked Paver, 1:50 scale......................$150

Caterpillar 340D L Excavator, 1:50 scale ..................................$90

John Deere 744H Wheel Loader, 1:50 scale..............................$45

International TD-24 red Crawler Tractor w/Blade, 1:25 scale$130

Komatsu WA500-7 Wheel Loader, 1:50 scale ..........................$85

Caterpillar D350D Articulated Dump Truck, 1:50 scale ..........$45

Caterpillar AP-1050 Asphalt Paver, 1:50 scale........................$125

Caterpillar 963K Track Loader, 1:50 scale ........................$85

Case 621D Wheel Loader, 1:50 scale ........................................$45

Terex 33-07 Off Highway Truck, GMC green, 1:40 scale ......$125

Caterpillar 988B Wheel Loader, 1:50 scale................................$80

Case 621B Wheel Loader, 1:50 scale ........................................$45

Kenworth T880 with Tri-Axle Trailer, Black & Silver, 1:50 scale....

Caterpillar 438C Backhoe/Loader, 1:50 scale ..........................$80

Bobcat X325 Compact Excavator, 1:25 scale ..........................$45

........................................................................................................$120

Caterpillar D5K2 LGP Track Type Tractor, 1:50 scale ............$80

John Deere 400D Articulated Dump Truck, 1:50 scale ..........$45

Kenworth T880 with Tri-axle Trailer, Red&Red, 1:50 scale ..$120

JCB 430 Articulated Wheel Loader, 1:35 scale ........................$80

Caterpillar 906 Compact Wheel Loader, 1:50 scale ................$45

Caterpillar D7E Track-Type Tractor, pipeline configuration,

Caterpillar D8L Track-Type Tractor, 1:50 scale ........................$80

Case CX210 Excavator, 1:50 scale..............................................$45

1:50 scale ......................................................................................$115

Volvo L35G Wheel Loader, 1:50 scale........................................$80

Case 1850K Dozer, 1:50 scale......................................................$45

Mack Granite Dump Truck, black, 1:50 scale..........................$115

Caterpillar 769C Off-Highway Truck, 1:50 scale ......................$80

Caterpillar 623G Paddle Scraper, 1:50 scale ............................$45

Caterpillar 245 Excavator, 1:50 scale........................................$115

JCB 3Cx Backhoe/Loader, 1:35 scale ........................................$80

John Deere 650J Dozer, 1:50 scale ............................................$45

Wacker Neuson ST45 Compact Track Loader, 1:32 scale ..$115

Caterpillar 950K Wheel Loader, 1:50 scale................................$75

Volvo L35B Compact Loader, 1:50 scale ..................................$45

Peterbilt 367 black/red Dump Truck, 1:50 scale ....................$115

Volvo L60H Wheel Loader, 1:50 scale ........................................$75

Volvo EC280 Excavator, 1:50 scale ............................................$45

Caterpillar 14M Motor Grader, 1:50 scale ................................$100

Terex 2566C Articulated Dump Truck, 1:50 scale ....................$75

Faun-Frisch F85A Motor Grader, 1:50 scale ............................$45

Terex TR60 White Off-Highway Dump Truck, 1:50 scale......$100

Caterpillar 416 Backhoe/Loader, 1:32 scale..............................$70

John Deere 850C Series II Dozer, 1:50 scale ..........................$45

Allis Chalmers Forty Five Motor Grader, 1:50 scale..............$100

Case 850C Angle/Tilt Dozer, 1:35 scale......................................$60

Caterpillar D10N Track-Type Tractor, 1:50 scale ......................$45

Caterpillar 323F Excavator w/thumb, 1:50 scale......................$90

Case 850 Angle Tilt Dozer, 1:35 scale ........................................$60

O&K L30 Wheel Loader, 1:50 scale ..........................................$45

JCB 540-200 Loadall Telehandler, 1:50 scale............................$90

Liebherr L531 Wheel Loader, 1:50 scale....................................$60

Caterpillar/Holt 1928 2-Ton Tractor, 1:16 scale ........................$45

Wacker Neuson ET20 Compact Excavator, 1:32 scale ..........$90

Liebherr R914 Excavator, 1:50 scale ..........................................$60

Volvo A25C Articulated Dump Truck, 1:50 scale......................$40

Collections Wanted, I Buy Collections

Shipping and Handling Included

CEG Scale Models

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

800-523-2200 • 610-506-5961 Cell Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 35

Visit our website for more attachments!

www.nationalattachments.com

Atlanta: 404-472-0790 Baltimore/DC: 301-937-6088 Charlotte: 215-289-9480 Chicago: 815-725-1470

Cinncinnati: 859-581-7500 Dallas: 972-227-1210 H ton: 713-670-0220 Hous Loss Angeles: 562-921-0748

Philadelphia: 215-289-9480 80 Phoenix: 562-921-0748 Tampa: 863-606-5999

www.Act tiveRadiator.com

We have an Extensive Used Inventory!

Page 36 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bob Buckley Retires; Joshua Phillips N.J.-Based Company Joins CEG, Superintendent’s Profile Seeks Equipment Joshua Phillips has joined Construction Equipment Guide (CEG) as national sales representative and Superintendent’s Profile as show manager. Phillips will be replacing the retiring Bob Buckley, who has been trade show manager of Superintendent’s Profile and national sales representative of CEG for the past 15 years. Phillips most recently worked in lumber yard sales for Little Falls Lumber and Little Falls Concrete, based in Little Falls, Albany and Syracuse, N.Y. Prior to that, he worked for Carbone Automotive Group as its fleet and commercial sales manager. During Buckley’s tenure with CEG and Superintendent’s Profile, he spearheaded significant and sustained growth of the NYS Highway & Public Works Expo, held annually in Syracuse N.Y., selling out exhibit space for the majority of those years. Joshua Phillips has joined Construction “I’ve developed a ton of rela- Equipment Guide (CEG) as national sales reptionships with customers and will resentative and Superintendent’s Profile as miss the conversations I’ve been show manager. privileged to have with them over the many years,” Buckley said. “I’m looking During Bob Buckley’s tenure with forward to working with Josh [Phillips] and CEG and Superintendent’s Profile, introducing him to our friends and customers. he spearheaded significant and The construction industry and the New York sustained growth of the NYS State highway and public works community are Highway & Public Works Expo, both intensely relationship-centered fields and held annually in Syracuse N.Y., that’s been my passion all along during my selling out exhibit space for the tenure. Josh has that same passion about relamajority of those years. tionships and I am confident that all our customers and friends will see that, as well. All of you will be in great hands. I am confident that Josh will be able to step in and continue the excellent service that our customers are accustomed to receiving.” Phillips is excited to get started and will begin meeting with customers immediately. “People don’t buy a product, they buy you,” he said. “While we have excellent publications and services, both with Superintendent’s Profile and Construction Equipment Guide, bringing advertisers and prospective customers together with our readers begins with trust and never stops. I am excited to carry on Bob’s excellent relationships and to continue fostering that trust. We at Profile and CEG care just as much about our advertisers and readers’ success and we do ours, and I am proud to be working for a company that truly operates by this standard.” To contact Joshua Phillips, call 315/7255726 or e-mail jphillips@cegltd.com. CEG

Dealer Partners “I am excited to carry on Bob’s excellent relationships and to continue fostering that trust.” Joshua Phillips

Construction Equipment Guide

Ransome Attachments has introduced a three-tiered program designed to attract quality multi-location dealers to partner in the sale of various brands of unique attachments.

“Our complementary family of attachments for heavy and compact equipment makes Ransome a one-stop shop for equipment dealers.” Eric Ransome

Ransome Attachments

Ransome Attachments announced the introduction of a three-tiered dealer program designed to attract quality multilocation dealers to partner in the sale of various brands of unique attachments. “Our complementary family of attachments for heavy and compact equipment makes Ransome a one-stop shop for equipment dealers,” said Eric Ransome, president of Ransome Attachments. “We have been servicing the construction industry locally and nationally for more than 20 years with quality wood splitters, screening buckets, grapples, concrete pulverizers, post drivers and more.” The Ransome three-tied dealer program offers multi-location dealers immediate cash incentives and priority access to inventory while providing attractive pricing, performance incentives, and seasonal promotional opportunities for all dealers regardless of size. Qualifying dealers in the MidAtlantic and Northeastern United States will be contacted and invited to join the Ransome family of professional equipment dealers. For more information, visit ransomeattach.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 37

Page 38 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FALL BACK INTO SAVINGS WITH OUR LOW PRICES!

(1) 2003 Oshkosh Front Discharge Mixer, Model S-2346, Engine: Cat C12, Trans: Allison HD-4560............................................................................................................................$20,500 (1) 2004 Oshkosh Front Discharge Mixer, Model S-2346, Engine: Cummins ISM 350HP, Trans: Allison HD-4560 .................................................................................................... $31,900 (2) 2004 Oshkosh Front Discharge Mixers w/Trainer Cab, Model S-2346, Engine: Mack E-7, Trans: Allison HD-4560 ....................................................................................................$31,900 1986 Stephens 12yd Batch Plant, 24” Feed Conveyor w/2 Feed Bins 36” Batch Belt.................... ..................................................................................................................................Call for Price NEW Baldor Crusher Motor, 400hp, 500RPM, Direct Drive Shaft............................Call for Price

Silvi Group Companies Fairless Hills, Pennsylvania Tim Kurz • 267-566-1802 • tkurz@silvi.com

www.silvi.com

BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!

(301) 372-0083 Shipping & Containerization Available

WWW.BRANDYWINE-EQP.COM

WE BUY TRUCKS!

New Witzco Lowboys, Customization Available, 35-50 Ton in Stock ......................................$Call

1985 Cat 963 Loader, 16,863 Hrs, Canopy, Hyd Quick Coupler, Bkt & Forks, Aux. Hyd ..$32,000

1994-1995 Cat 416B 4x4 Backhoes (3 Available!) EROPS, Heat, Extendahoe$27,500

2016 Komatsu PC240LC-11, 2,458 Hours, JRB Hyd. Q/C, 54” Bkt, DON’T MISS IT! ....$156,000

(2) Available

Unused 2018 Cat 950M Wheel Loaders, Brand New! Enclosed Cab w/AC, 4.75 Cubic Yard Bkt, Rear View Camera, Warranty Available ....$Call

2004 Ingersoll Rand SD45D Compactor, 1393 Hrs, 54” Drum, Shell Kit Included, OROPS, New Paint, 1 Owner! ......................................$31,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 39

Page 40 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Paving

SECTION

Pages 41-59

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Cat COMMAND Helps Firms Achieve Compaction Quality Caterpillar announced the release of Cat COMMAND for Compaction, an operator-assisted technology that automates the soil compaction process and helps contractors achieve compaction quality. The COMMAND for Compaction system is available for use on select Cat vibratory soil compactors as a dealer installed kit on both new and existing B-Series machines. Simple Set-up and Operation An in-cab display with an intuitive, touchscreen interface makes setup easy and the system connects to common base stations with no back office or design needed. The operator uses the machine to map the boundaries of the area to be compacted and enters the compaction parameters. Once the operator places the machine in “auto,” the system will control the propulsion, steering and vibration of the machine. Recent jobs are saved in the system and can be accessed through the touchscreen interface. An integrated object detection system alerts the operator if an object is in the pathway. If there is an area that cannot be compacted using vibration, the operator can choose to turn the vibration system off and give control back to the system once the area has been passed. The COMMAND for Compaction system is available for use on select Cat vibratory soil compactors as a dealer installed kit on both new and existing B-Series machines. An in-cab display with an intuitive, touchscreen interface makes setup easy and the system connects to common base stations with no back office or design needed.

Consistent Results By automating the compaction process, operator skill gaps are minimized by providing consistent results based on operator inputs. COMMAND for Compaction enables compaction quality by maintaining constant speed and correct pass count with consistent and precise overlap, allowing contractors to hit compaction targets more frequently. Cat COMMAND for Compaction will be available in first quarter 2020. For more information, visit www.cat.com. 

Page 42 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Zero ero Tur Turn fo or Mobil Mobilit ity y

inffo@gomac o@ @gomaco.com ❘ www.gomaco.ccom Murrysville, PA

Somerset, PA

724/327-1300

814/445-7915

Lantz Corners, (Kane), PA

Cranberry Twp., PA

814/778-5250

724/776-1400

Clearfield, PA

Erie, PA

Clarksburg, WV

814/765-1611

814/898-3388

304/842-2222

www.clevelandbrothers.com

VDOT Earns ACPA’s Lifetime Pavement Recognition Award PLEASE CONTACT YOUR BAGELA ASPHALT RECYCLER DEALER:

www.gtmidatlantic.com

Folcroft, PA 1545 Hook Rd. • Folcroft, PA 19032 610-586-2710

Vineland, NJ 551 N Harding Hwy • Vineland, NJ 08360 856-697-1414

www.centralequipmentco.com

Stillwater, ME 45 Dempsey-Greaves Lane • Stillwater, ME 04489 800-479-6193 Fax: 207-827-3774

Gorham, ME 54 Olde Canal Way • Gorham, ME 04038 800-479-6193

Totowa, NJ 200 Bomont Pl. • Totowa, NJ 07512 973-785-4900

Freehold, NJ 212 Monmouth Rd. • Freehold, NJ 07728 732-780-4600

US Distributor www.pavementrecyclers.com

70 Platt Road Shelton, CT 06484 203-944-0525

The American Concrete Pavement Association (ACPA) has presented its Lifetime Pavement Recognition Award to the Virginia Department of Transportation (VDOT) in recognition of a section of Virginia State Route 316. Accepting the award was Mike Davis, Hampton Roads deputy district engineer of Construction and Engineering. With only minimal maintenance, State Route 316 (Greenbush Road) has served the communities of Accomack County, Va., for about eight decades. This exceptional pavement has far exceeded its original design life and exhibits the durability and performance for which concrete pavement specifiers strive. “This highway is not only an important travel route for local communities but is an excellent example of the longevity that has become one of the greatest values and true hallmarks of concrete pavement,” said Gerald F. Voigt, ACPA president and CEO. Awarded annually since 1994, this award is presented to the agency/owner of an inservice concrete pavement that has demonstrated exceptional performance and service

to its local community, state, and users. This recognition rotates annually among public market segments: highway, street/road, and airport. For more information, visit www.acpa.org. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 43

Your o r #1 De ealer for Road d Build ding Equipment CC&T, a di divvision i i off GT Mid Atlantic, Atl ti offers ff the th machines you y need from thhe brands you truust

Roadtec 2018 Dealer of the Year

Call Us Today (610) 5586-2710 Ask about financing nancing offers!

www.gtmida gtmidatlantic.com tlantic com

Page 44 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

Auction Profiles Ad Closing Date Publishing Date

ISSUE

Excavators Ad Closing Date Publishing Date

ISSUE

6 8 10

March 9, 2020 March 18, 202

Skid Steers, CTLs Ad Closing Date Publishing Date

ISSUE

February 10, 2020 February 19, 2020

Asphalt, Concrete Paving Ad Closing Date Publishing Date

ISSUE

January 13, 2020 January 22, 2020

April 6, 2020 April 15, 2020

Attachments Ad Closing Date Publishing Date

May 4, 2020 May 13, 2020

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 45

Your #1 Source Sourcce for Ever Everything Road Building Serving Easteern PA, New Jersey, Delaware, an nd Maryland

Roadtec 2018 Dealer of the Year e

Roadtec’s reliable equ uipment is simply better. Asphalt Pavers Asphalt Screeds

Cold Planers and Milling Machines

Material Transfer Vehic cles

Brooms

See for Yo ourself. Schedule a Demo o Toda o y! (610) 586 6-2710 | www.gtmidatlan g ntic.com

Page 46 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

GOMACO Univ.’s Schedule 866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years 2010 Rosco Maximizer II distributor, 1950 gallons, EZ-2S computer w/1 ft cut-offs, diesel heat, 12 ft spray bar, IH Workstar 7300 w/Maxxforce diesel engine, 6 spd transmission

2015 Volvo PT125R pneumatic roller, 9 wheels, Kubota diesel engine, hydrostatic drive, water system

2011 Etnyre Centennial II distributor, 1750 gallons, BT-1 computer controls, diesel heat, 14 ft spray bar, Ford F750XL, Cummins ISB diesel engine, auto trans w/2 spd axle

2008 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, front wheel assist, Cat C7 diesel engine

2003 Etnyre 2WD chip spreader, computerized, 11 ft spread hopper w/individual air gates & agitator, Cummins 5.9L diesel engine, folding rear hopper

2006 Etnyre Centennial II distributor, 2000 gallons, computerized, propane heat, 12 ft spray bar, GMC T7500 w/Isuzu dsl engine, 6 spd manual transmission

2002 Rosco Maximizer II distributor, 1850 gallons, EZ-2S computer w/1 ft cut-offs, propane burners, 12 ft spray bar, 2002 Freightliner FL70 w/Cummins diesel eng, 6 spd transmission, 2 spd axle

2013 Rosco Maximizer 3B distributor, 1550 gallons, Max3B computer, diesel heat, 16 ft extending spray bar, 2014 Volvo DD25B double drum 47” vibratory roller, UD cabover truck w/UD 7.0 diesel engine, auto trans, Volvo dsl eng, double drum drive, water system, 3 tons low miles

3517 Wayne White Rd., Climax, NC 27233

GOMACO University prides itself on GOMACO Leica Geosystems’ iCON offering the best education by combining Training: classroom education with hands-on shop iCON Pavers and Trimmers ONLY, Feb. time. Both are taught by knowledgeable 18 to 21 and iCON 1UP Curb & Gutter University instructors and service represen- ONLY, March 24 to 27 tatives who travel the world setting up and GOMACO Trimble Training: working on GOMACO equipment. Curb & Gutter ONLY, Jan. 7 to 10 and Contractors are urged to prepare this offsea- Pavers ONLY, Feb. 11 to 14 son so the 2020 paving season is full of proGOMACO Topcon Training: duction and maximum rideability results. Curb & Gutter ONLY, March 31 to April “We are ready to welcome students once 3 and Trimmers & Pavers ONLY, April 7 to again this offseason to GOMACO 10 University,” Rod Schneider, director of training at GOMACO University, said. “We have a full course listing covering the GOMACO equipment line and the control systems they operate with. We encourage you to train this winter so you can hit the ground running for the 2020 paving season.” The first classes of the season begin the second week of January and run through the middle of April. More than 22,000 students have attended the courses, which are taught at GOMA- Students get hands-on training during an Xtreme CO University facilities in Commander IIIx class last season at GOMACO Ida Grove, Iowa. Additional University. The University is offering several classes courses may be added as again in 2020 on GOMACO’s Xtreme line of curb and needed, so keep watching gutter machines. www.gomaco.com/university to see the complete listing or to register for Concrete Mix Design courses. Each course includes classroom and Quality Control learning, as well as shop time, and covers the March 17 to 20. This hands-on course will controls, setup, operation, maintenance and focus on the basics of concrete mix design as diagnostics of the specific GOMACO well as more advanced topics including machine. cement types and application, aggregates, admixtures and optimizing the mix for Curb and Gutter Classes paving applications. Troubleshooting will GT-3600 G21/G22: Jan. 21 to 24 look at material incompatibility issues, edge GT-3600 G+: Jan. 14 to 17, Feb. 25 to 28, slump, bug holes and other mix related and April 14 to 17 issues. The second part of the course will Xtreme 3300, GT-3600, and Three- concentrate on achieving specified values Track Commander III: Feb. 4 to 7, Feb. 11 for strength and durability and an overview to 14, March 3 to 6, and April 7 to 10 of basic concrete field and lab test proceThree-Track Commander III G21/G22: dures. More advanced test procedures will March 17 to 20 be either demonstrated or discussed and include maturity, chloride resistivity, Slipform Paver Classes calorimetry and numerous others that will Two-Track and Four-Track Paver likely be part of new or updated specificaG21/G22: Jan. 7 to 10 and March 3 to 6 tions. The course will feature practical, Two-Track and Four-Track Paver G+: hands-on experience in the behavior of paste Jan. 28 to 31, Feb. 4 to 7, Feb. 25 to 28, and and mortar, as well as testing. The session is March 31 to April 3 taught by Michael Ayers, who is well known IDBI: Jan. 28 to 31 in the industry for his knowledge of concrete mixes. 3D Technology Classes C-450 Cylinder Finisher: Feb. 18 to 21 GOMACO Leica Geosystems’ Grade Trimmers: Jan. 21 to 24 and PaveSmart Training: March 17 to 20 PaveSmart Pavers and Trimmers ONLY, For more information, visit Jan. 14 to 17 www.gomaco.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 47

DEDICATED TO SUCCESS

Dedicated to Success.

A FULL LINE OF EQUIPMENT & PRODUCT SUPPORT SOLUTIONS FOR ALL YOUR ROAD BUILDING NEEDS. P

Pennsylvania Folcroft

New Jersey Vineland

Totowa

Freehold

1545 Hook Rd Folcroft, PA 19032 (610) 586-2710

551 N. Harding Hwy Vineland, NJ 08360 (856) 697-1414

200 Bomont Pl Totowa, NJ 07512 (973) 785-4900

212 Monmouth Rd Freehold, NJ 07728 (732) 780-4600

Maryland Frederick

Upper Marlboro Baltimore

1561 Tilco Dr 6300 Crain Hwy Frederick, MD 21704 Upper Marlboro, MD (800) 951-2550 20772 (800) 227-3580

www.gtmida gtmidatlantic.com tlantic com

Aberdeen

2300 Eskow Ave 629 S. Philadelphia Baltimore, MD 21227 Blvd (800) 218-9462 Aberdeen, MD 21001 (800) 737-0049

Delaware Greenwood 12420 Sussex Hwy Greenwood, DE 19950 (800) 756-9433

Page 48 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Products shown with optional equipment.

MAULDIN Paving Products... MASTERS OF THE MAT! Contact your MAULDIN dealership today and review all the choices available from the MAULDIN 1750-C 2ႈ FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV d

GEORGE

ASSOCIATES, INC. Construction and Industrial Equipment

2340 Montgomery George Associates, Inc. Street Silver Spring, MD 20910

P Fax: 301-588-6605

2340 Montgomery St. Silver Spring, MD 20910 (301) 589-9490 www.georgeassociates.info

Asphalt Care Equipment Inc. 2765 Galloway Road Bensalem, PA 19020 (215) 639-9800 (800) 223-1202 www.asphaltcare.com

Woodco Machinery www.woodcomachinery.com 60 Shun Pike Johnston, RI 02919 (401) 942-9191

140 Wales Avenue Avon, MA 02322 (781) 935-3377

22 North Maple Street Woburn, MA 01801 (781) 935-3377

Vantage Equipment 5985 Court St. Rd. Syracuse, NY 13206 (315) 437-2611 17 Northway Lane Latham, NY 12110 (518) 220-9500 4554 W. Saile Dr. Batavia, NY 14020 (585) 344-1931 www.vantageeq.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 49

JESCO, Inc. 1275 Bloomfield Ave. • Fairfield, NJ 07004 973/227-2221 • 800/321-8080 118 St. Nicholas Ave. • S. Plainfield, NJ 07080 908/753-8080 • 800/241-7070 www.jesco.us

1440 Route 9W • Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com

30 Barnes Ind. Pk. Rd. • Wallingford, CT 06492 203/265-6781 17 Eagle Road • Danbury, CT 06810 203/775-1203 80 Pratt Rd. • Plainfield, CT 06374 860/546-4808 www.wiclark.com

King of Prussia, PA 800/733-3776 www.usmuni.com

1001 Lehigh Station Road • Henrietta, NY 14467 585/334-3867 • 866/683-5338 5035 Genesee Street • Buffalo, NY 14225 716/681-7100 • 800/834-9606 monroetractor.com

1701 Roseneath Rd., Richmond, VA 23230 804/359-4048 www.richmondmachinery.com

39 Jersey Street • West Babylon, NY 11704 631/643-2605 www.allislandequipment.com

Page 50 â&#x20AC;¢ December 25, 2019 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ Paving Section â&#x20AC;¢ Construction Equipment Guide

10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM

Jan a 29th â&#x20AC;&#x201C; Feb bruary 1st 1DVKYLOOH 71

RE R EGIS E GIS STER T ER N NO OW O W Nationall Pavement Expo EULQJV YHQGRUV DQG FRQWUDFWRUV WRJHWKHU ZKR PDNH WKHLU OLYLQJ IURP DVSKDOW DQG FRQFUHWH SDYLQJ VHDOFRDWLQJ VWULSLQJ VZHHSLQJ FUDFN UHSDLU SDYHPHQW UHSDLU DQG VQRZ UHPRYDO WR QHWZRUN ZLWK RWKHU SDYLQJ SURIHVVLRQDOV DWWHQG LQGXVWU\ ZRUNVKRSV DQG OHDUQ QHZ LGHDV DW RXU OHDGHUVKLS ERRW FDPS

ZZZ QDWLRQDOSDYHPHQWH[SR FRP 2IÃ&#x20AC;FLDO 0DJD]LQH RI 1D DWWLRQDO 3DYHPHQW ([SR

An Emerald Expositionss Event

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 51

W.I. CLARK COMPANY ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631/643-2605 allislandequipment.com

30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 17 Eagle Road Danbury, CT 06810 203/775-1203 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 www.wiclark.com

JESCO, Inc. 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 • 800/321-8080 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 • 800/241-7070 www.jesco.us

AMBROSE EQUIPMENT CO.

HOFFMAN EQUIPMENT COMPANY

1401 Hooksett Rd. Hooksett, NH 03106 603/644-8787 1 Madison Street Plainville, MA 02762 508/643-0044 www.ambroseequipment.com

1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com

STEPHENSON EQUIPMENT, INC.

MONROE TRACTOR

Harrisburg, PA 7201 Paxton Street Harrisburg, PA 17111 800/325-6455

1001 Lehigh Station Rd. Henrietta, NY 14467 585/334-3867 • 866/683-5338 5035 Genesee Street Buffalo, NY 14225 716/681-7100 • 800/834-9606 www.monroetractor.com

Wilkes-Barre, PA 600 Sathers Drive Pittston, PA 18640 866/667-6756

US MUNICIPAL SUPPLY INC.

Ebensburg, PA 2350 Munster Road Lilly, PA 15946 814/886-5191

King of Prussia, PA 800/733-3776 www.usmuni.com

Butler, PA 796 Unionville Road Prospect, PA 16052 724/865-9221

Albany, NY 3 Industry Drive Waterford, NY 12188 518/357-2200 Syracuse, NY 6018 Drott Drive East Syracuse, NY 13057 800/368-6455 www.stephensonequipment.com

Page 52 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

TYLER EQUIPMENT

GT MID ATLANTIC

WOODCO MACHINERY

www.tylerequipment.com

www.gtmidatlantic.com

www.woodcomachinery.com

Berlin, CT 860-356-0840

Vineland, NJ 856-697-1414

Avon, MA 508-584-8484

251 Shaker Road East Longmeadow, MA 01028 413-525-6351

1545 Hook Rd. Folcroft, PA 19032 610-586-2710 Totowa, NJ 973-785-4900 Freehold, NJ 732-780-4600

Headquarters Woburn, MA 781-935-1919 Johnston, RI 401-942-9191

ANDERSON EQUIPMENT CO. 18 Gorham Industrial Pkwy Gorham, ME 04038 207-591-5482 Bangor, ME 207-942-0177 Allegany, NY 716-372-8822

www.andersonequip.com

Endicott, NY 607-748-3400

Henrietta, NY 585-334-6770

Tonawanda, NY 717-877-1992 Syracuse, NY 315-463-8673

Latham, NY 518-785-4500

East Montpelier, VT 802-223-9689 South Charleston, WV 304-756-2800

HIGHWAY EQUIPMENT & SUPPLY CO. Lancaster, NH 603-788-5591

Shippenville, PA 814-226-4100 Clearfield, PA 814-765-5311 Somerset, PA 814-443-2867

www.hwyequip.com

4500 Paxton Street Harrisburg, PA 17111 717-564-3031 Drums, PA 570-788-1127

Lock Haven, PA 570-769-1070 Ephrata, PA 717-859-3132

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 53

Contact your local dealer:

CHADWICK-BAROSS, INC. www.chadwick-baross.com Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Westbrook, ME 207.854.8411 Concord, NH 603.224.4063

GEORGE

ASSOCIATES, INC. Construction and Industrial Equipment

P 2340 Montgomery Street GEORGE ASSOCIATES, INC. Fax: 301-588-6605 Silver Spring, MD 20910 www.georgeassociates.info

Silver Spring, MD 301.589.9490

HIGHWAY EQUIPMENT & SUPPLY CO. www.hwyequip.com Drums, PA 570.788.1127 Ephrata, PA 717.859.3132 Harrisburg, PA 717.564.3031 Lock Haven, PA 570.769.1070

Hoffman Equipment www.hoffmanequip.com Corporate Headquarters Piscataway, NJ 732.752.3600 Middlesex, NJ 732.377.4130 Deptford, NJ 856.227.6400 Lionville, PA 610.363.9200 Bronx, NY 718.822.1180 Medford, NY 631.207.2900

TYLER EQUIPMENT www.tylerequipment.com E. Longmeadow, MA 413.525.6351 Berlin, CT 860.356.0840

VANTAGE EQUIPMENT www.vantageeq.com Batavia, NY 585.344.1931 Latham, NY 518.220.9500 Syracuse, NY 315.437.2611

WOODCO MACHINERY www.woodcomachinery.com Headquarters Woburn, MA 781.935.1919 Avon, MA 508.584.8484 Johnston, RI 401.942.9191

Page 54 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

ECONOMIZER

TANGO BOMAG OSCILLATION

VARIOCONTROL

ASPHALT MANAGER

C.N. Wood Co., Inc. www.cn-wood.com Woburn, MA 781-935-1919 Avon, MA 508-584-8484 Whately, MA 413-665-7009 Johnston, RI 401-942-9191

Edward Ehrbar

Komatsu Northeast

Midlantic Machinery

www.ehrbar.com Holbrook, NY 631-563-7600 Yonkers, NY 914-738-5100 Danbury, CT 203-743-0888

www.komatsune.com South Plainfield, NJ 908-434-7004 Winslow, NJ 856-767-5900

www.midlanticmachinery.com

Baltimore, MD 410-247-2100 Laurel, DE 302-715-5382

Pine Bush Equipment East PBE www.pbeinc.com Pine Bush, NY 845-744-2006 Holmes, NY 845-878-4004

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 55

DEDICATED TO SUCCESS

Dedicated to Success.

MD/DE/NJ/Eastern PA

New England

Tracey Road Equipment (800) 872-2390

CC&T a division of GT Mid Atlantic

Ambrose Equipment Co., Inc. (603) 644-8787

(610) 586-2710

Page 56 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

New Second Generation Compact Cold Planers Feature Multiple Upgrades

GROFF TRACTOR & EQUIPMENT, INC. www.grofftractor.com

Available in 3- and 4-wheel designs, the Bomag BM 500/15-2 and BM 600/15-2 compact mills feature a reengineered vibration-isolated operator’s station that improves operator efficiency and productivity. A new suspension seat with optional heating boasts a 45-degree slewing angle for increased visibility to the left cutting edge and front/rear of the machine. The main control console is fully adjustable to fit individual operator preferences and simplified control grouping improves machine operating efficiency. Machine leveling sensors are now integrated into the side plate cylinders of the new mills. A new 7-in. (17.8-cm) full graphic color display offers intuitive operation and leveling control for efficient mill set-up. The conveyor joystick control has been repositioned for easier access, and it integrates both lifting and lowering functions for faster operation. Advancements to hydraulic system efficiency boost transport speed to 3.7 mph (6 kmh) for 3-wheel and 6.2 mph (10 kmh) for 4-wheel configurations. Maximum milling speed for 4-wheel configurations is increased by more than 25 percent for both models to significantly improve machine productivity. The Bomag BM 500/15-2 offers a maximum milling width of 19.7 in. (50 cm) and the BM 600/15-2 a maximum width of 23.6 in. (60 cm). Four extra cutting tools positioned at the left- and right-edge rings plus optimal arrangement of the tools across the drum delivers uniform, low vibration milling and smooth milled edges. A range of standard, fine, power and trenching drum designs are available in widths

The Bomag BM 500/15-2 offers a maximum milling width of 19.7 in. (50 cm) and the BM 600/15-2 a maximum width of 23.6 in. (60 cm).

from 3.15 to 23.6 in. (8 to 60 cm) with all featuring standard quick-exchange designs. The machines’ new super-light conveyor design features an increased, 30-degree swiveling angle in both directions for more efficient truck loading. The 15.7-in. (40-cm) wide conveyor offers up to a 111.2 cu. yd./hr. (85 cu m/hr) discharge rate and hydraulically folds for transport. The new conveyor design incorporates time-saving support brackets and multi-coupling for fast removal in minutes. All conveyor hoses and wiring are now positioned within the frame, reducing the chance of damage and improving machine uptime. A 140.8-hp (105-kW) diesel engine meeting stringent Tier IV Final (Stage V) emissions standards powers the new Bomag BM 500/15-2 and BM 600/15-2 cold planers. Each model features improved front-to-rear weight balance, enhancing traction. Both machines offer a minimum milling radius of just 9.6 in. (24.4 cm) for efficient milling around obstructions like manhole covers. The machines’ new triple-setting water pump system — sprinkling, high-flow and refill/suction — allows the operator to adjust waterflow as needed to extend intervals between refills. A large plate positioned at the front of the machine delivers enhanced protection to prevent damage to the water tank and hood. For more information, visit www.bomag.com. 

ACPA’s Sustainable Practices Award Goes to Federal Highway Administration ACPA presented its 2019 Sustainable Practices Award to the Federal Highway Administration. The award was presented in recognition of leadership in creating a framework for sustainable design and construction practices that consider societal, environmental and economic factors (the triple bottom line). Accepting the award for the FHWA was Gina Ahlstrom, FHWA Pavement Materials team leader. Since 2011, the FHWA-led Sustainable Pavements Technical Working Group (SPTWG) has been a positive and productive forum for the public and private sectors. The SPTWG

has earned high marks for its open exchanges among stakeholders. FHWA has fostered increased awareness of use-phase impacts, which are now considered essential elements of sustainability and life-cycle analysis. For more information, visit www.acpa.org.  ACPA presented its 2019 Sustainable Practices Award to the Federal Highway Administration. Accepting the award for the FHWA was Gina Ahlstrom, FHWA Pavement Materials team leader.

6779 Carlisle Pike Mechanicsburg, PA 17050 800/33-GROFF 800/33-(47633)

100 Smith Drive Cranberry Twp., PA 16066 877/33-GROFF 877/33-(47633)

20 Stauffer Lane Ephrata, PA 17522 888/66-GROFF 888/66-(47633)

963 South Center Avenue New Stanton, PA 15672 888/82-GROFF 888/82-(47633)

210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633)

4355 Admiral Peary Hwy Ebensburg, PA 15931 877-97-GROFF 877-97-(47633)

LESLIE EQUIPMENT COMPANY www.lec1.com 6248 Webster Road Cowen, WV 26206 304/226-3299

80 John Deere Lane Norton, WV 26285 304/636-6421

2098 Lillian Lane Pleasant Valley, WV 26554 304/534-5454

136 Clifftop Drive Beaver, WV 25813-1525 304/255-1525

19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818

MONROE TRACTOR www.monroetractor.com 1001 Lehigh Station Road 8194 State Route 415 Henrietta, NY 14467 Campbell, NY 14821 585/334-3867 607/739-8741 800/866-8912 5035 Genesee Street Buffalo, NY 14225 6 Equipment Drive 716/681-7100 Binghamton, NY 13904 Toll Free: 800/834-9606 607/754-6570 866/321-4277 7300 Eastman Road N. Syracuse, NY 13212 315/452-0000 Toll Free: 800/287-5286

SCHMIDT EQUIPMENT INC. Serving MA and RI since 1956 www.schmidtequipment.com 80 Southbridge Rd. • Route 20 North Oxford, MA 01537 508/987-8786 • 800/922-8295

1620 Page Blvd Springfield, MA 01104 413/543-5595 • 800/734-5594

2397 GAR Highway • Rte 6 & 136 North Swansea, MA 02777 508/379-9810 • 800/456-6885

4 Sterling Road North Billerica, MA 01862 978/667-4345 • 800/531-2266

88 Camelot Drive • Unit 42 Plymouth, MA 02360 508/830-9997 • 800/916-0997

ROBERT H. FINKE & SONS INC. www.finkeequipment.com 1569 US Route 9W Selkirk, NY 12158 888/266-9821 518/767-9331

NORTRAX www.nortrax.com 98 Sheep Davis Road 300 Clinton Street Pembroke, NH 03275 Springfield, VT 05156 603/225-2769 802/885-6840

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 57

CENTRAL EQUIPMENT COMPANY www.centralequipmentco.com 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193

JESCO, INC. www.jesco.us 118 St. Nicholas Ave. 497 Fishkill Avenue South Plainfield, NJ 08070 Beacon, NY 12508 908/753-8080 845/831-1800 1790 Route 38 Lumberton, NJ 08048 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221

110 East Jefryn Blvd. Deer Park, NY 11729 844/482-0910

ELLIOTT & FRANTZ, INC

W.I. CLARK CO.

BOBCAT OF SARATOGA

www.elliottfrantz.com 10421 Guilford Road 12051 Tac Court Jessup, MD 20794 Manassas, VA 20109 301/725-7394 703/257-2381

www.wiclark.com

www.bobcatofsaratoga.com

30 Barnes Industrial Park Rd.Wallingford, CT 06801 203/265-6781

1279 Saratoga Road Gansevoort, NY 12831 877/461-5065

38420 Sussex Highway Delmar, DE 19940 302/846-3033

450 E. Church Road King of Prussia, PA 19406 610/279-5200

17 Eagle Road Danbury, CT 06810 203/775-1203 80 Pratt Road Plainfield, CT 06374 860/546-4808

Page 58 • December 25, 2019 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

^ĞĞ ǁ ǁŚ ŚĂƚ ƚŚĞ ƐŚĂŬĞͲƵƉ ŝŝƐƐ Ăůů ĂďŽƵƚ͊

zŽƵƌ WĂƌƚŶĞƌ ŽŶ ƚŚĞ ZŽĂĚ ŚĞĂĚ dynapac.us | 800-651-0033 Fo ollow Dynapac North America

s®Ý®ã ÊÄ Ê¥ ÊçÙ s® ½ ÙÝ ããÊ Ê ù͊

ANDERSON EQUIPMENT COMPANY

ASPHALT CARE EQUIPMENT INC.

Ambrose Equipment Co, Inc.

800-414-4554 www.andersonequip.com

www.asphaltcare.com 2765 Galloway Road Bensalem, PA 215-639-9800 800-223-1202

www.ambroseequipment.com Plainville, MA 508-643-0044 Hooksett, NH 603-644-8787

Pennsylvania West Virginia Pittsburgh Charleston Clarion Fairmont Clearfield Somerset New Hampshire Lancaster Manchester Maine Bangor Gorham Vermont East Montpelier

New York Buffalo Albany Endicott Olean Rochester Syracuse Watertown

Barry Equipment Co., Inc.

Highway Equipment Company

www.barryequipment.com Webster, MA 508-949-0005

www.highway-equipment.com Millstone Township, NJ 732-446-7600

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 25, 2019 • Page 59

A. Montano Co, Inc. 571 Route 212 • Saugerties, NY 12477 845/247-0206

Roads must be built. Worlds must be connected.

www.amontanoco.com

GT Mid Atlantic, LLC 551 N. Harding Highway • Vineland, NJ 08630 800-874-2650 212 Monmouth Rd. • Freehold, NJ 07728 800-874-2659 200 Bomont Place • Totowa, NJ 07512 800-558-7426 12420 Sussex Hwy • Greenwood, DE 19950 302-349-5760 2300 Eskow Ave. • Baltimore, MD 21227 410-247-7454

What began over a century ago... Evolved into a combination of experience and innovation.

1561 Tilco Drive • Frederick, MD 21704 301-682-4441 6300 Crain Highway. • Upper Marlboro, MD 20772 301-627-3938 629 S. Philadelphia Blvd. • Aberdeen, MD 21001 410-575-6580 www.gtmidatlantic.com

Highway Equipment Company 22035 Perry Highway • Zelienople, PA 16063 724-452-7800 5846 West Road • McKean, PA 16426 814-476-7755 4690 Route 219 • Dubois, PA 15801 814-371-3600 www.highway-equipment.com

Tracey Road Equipment Syracuse 6803 Manlius Center Rd • East Syracuse, NY 13057 315-437-1471 Binghamton 1523 Route 11 North • Kirkwood, NY 13795 607-775-5010 Rochester 300 Middle Rd • Henrietta, NY 14467 585-334-5120 Watertown 19598 Cady Road • Adams Center, NY 13606 315-788-0200 Albany 115 Railroad Ave. • Albany, NY 12205 518-438-1100 www.traceyroad.com

www.sakaiamerica.com (800) 323-0535

Page 60 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Chadwick-BaRoss www.chadwick-baross.com Westbrook, ME 207.854.8411 Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Concord, NH 603.224.4063

Highway Equipment & Supply Co. www.hwyequip.com Harrisburg, PA 717.564.3031 Drums, PA 570.788.1127 Ephrata, PA 717.859.3132 Lock Haven, PA 570.769.1070

Rudd www.ruddequipment.com Pittsburgh, PA 412.741.1731 Clearfield, PA 814.765.8500 Louisville, KY 502.456.4050 Charleston, WV 304.755.7788

Tyler Equipment www.tylerequipment.com East Longmeadow, MA 413.525.6351 Berlin, CT 860.356.0840

Vantage Equipment www.vantageeq.com Latham, NY 518.220.9500 Batavia, NY 585.344.1931 Syracuse, NY 315.437.2611

Woodco Machinery www.woodcomachinery.com Headquarters Woburn, MA 781.935.1919 Avon, MA 508.584.8484 Johnston, RI 401.942.9191

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 61

Page 62 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 64 â&#x20AC;¢ December 25, 2019 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ Mini & Compact Equipment Section â&#x20AC;¢ Construction Equipment Guide

YOUR NEEDS. UNE N ARTHED. Building your connstruction business togetheer. Our G-Series Compact Excavators may be SMALL BUT THEYlRE FULL OF BIG IDEAS FROM CONTRRACTORS AND Î&#x2C6;EET MANAGERS LIKE L YOU 'OR EXAMPLE A WIDER ENTRYWAY *MPROVED VISIBILITY " THIRD SERVICE DOOR FOR EASIER MAINNTENANCE AND COOLER THAT ARE CLEANING "ND A DEPENDABLE NO FUSS 'INAL 5IER ENGINE :O :OU ASKED FOR MACHINES M OPERATOR FRIENDLY P Y DEPENDABLE P M AND EASYY TO MAINTAIN 8E MADE SURE THE ( 4ERIES DELIVERS 4EE FOR YOURSELF AT YOUR DEALER OR AT +OHN%EEERE COM EXCAVATORS CONNECTICUT

MAINE

NEW JERSEY

NEW YORK

The W.I. Clark Company

Nortrax

JESCO, Inc.

Five Star Equipment, Inc.

Nortrax

Hermon, ME 207-947-6786

118 St. Nicholas Ave. South Plainfield, NJ 908/753-8080 800/241-7070

60 Paul Rd. Rochester, NY 585/235-3011

Clifton Park, NY 518-371-5111

Wallingford, CT 203/265-6781 Danbury, CT 203/775-1203 Plainfield, CT 860/546-4808 www.wiclark.com

DELAWARE JESCO, Inc. Middletown, DE 302/376-0784

MARYLAND JESCO, Inc.

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 District Heights, MD 301/909-7799 Waldorf, MD 301/861-2323

Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777

MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 508/987-8786 North Billerica, MA 978/667-4345 Plymouth, MA 508/830-9997 No. Swansea, MA 508/379-9810 Springfield, MA 413/543-5595 www.schmidtequipment.com

1275 Bloomfield Ave. Fairfield, NJ 973/227-2221 800/321-8080 1790 Route 38 Lumberton, NJ 609/267-2020 888/217-0600 www.jesco.us

1653 NY Route 11 Kirkwood, NY 607/775-2006 284 Ellicott Rd. Orchard Park, NY 716/662-2191 6500 E Taft Road Syracuse, NY 315/452-4560

Gouverneur, NY 315-287-0703

NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769

VERMONT Nortrax

JESCO, Inc. 497 Fishkill Avenue Beacon, NY 845/831-1800 800/724-0725 110 East Jefryn Blvd. Deer Park, NY 844-482-0910

Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com

PENNSYLVANIA Five Star Equipment, Inc. 1300 East Dunham Dr. Dunmore, PA 570/346-1701 46 Route 97 Waterford, PA 814/796-2663 2585 Lycoming Creek Rd. Williamsport, PA 570/494-4030 www.fivestarequipment.com

Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 65

Connecticut

Massachusetts

New York

Bobcat of Connecticut Compact Machines Only East Hartford (860) 282-2648 Bobcat of Stratford Compact Machines Only Stratford (203) 380-2300

ATS Equipment Auburn (508) 832-8500 Boston (617) 825-3600 Bobcat of Greater Springfield Compact Machines Only West Springfield ( 413) 746-4647 Bobcat of Worcester Compact Machines Only Auburn (508) 752-8844

All Island Equipment West Babylon (631) 643-2605 Contractor Sales Co Albany (518) 456-1445 Tracey Road Equipment Adams Center (315) 788-0200 East Syracuse (315) 437-1471 Kirkwood (607) 775-5010 Westchester Tractor Brewster (845) 278-7766 Baschmann Services, Inc. Elma (716) 655-1101

Delaware Elliott & Frantz Delmar (800) 220-3015

Maine Frank Martin Sons Fort Kent Mills (207) 834-3171 Madison (207) 858-4748

Maryland Elliott & Frantz Jessup (800) 220-3752

New Jersey Highway Equipment Millstone Township (732) 446-7600

New Hampshire Chappell Tractor Sales Brentwood (800) 616-5666 Concord (603) 225-3361 Milford (800) 698-2640

Dealer Imprint Area

Pennsylvania Best Line Equipment Compact Machines Only State College (814) 237-9050 Best Line Equipment-Bobcat of Lehigh Valley Compact Machines Only Allentown (484) 223-3814 Best Line Equipment-Bobcat of Mechanicsburg Compact Machines Only Mechanicsburg (717) 697-1177 Best Line Equipment-Bobcat of Philadelphia Compact Machines Only Hatboro (215) 675-3009

Best Line Equipment-Bobcat of Shippensburg Compact Machines Only Shippensburg (717) 530-8400 Best Line Equipment-Bobcat of West Chester Compact Machines Only West Chester (610) 241-3633 Best Line Equipment-Lemont Furnace Compact Machines Only Lemont Furnace (724) 437-1578 Best Line Equipment-Muncy Compact Machines Only Muncy (570) 546-8422 Best Line Equipment-Towanda Compact Machines Only Towanda (570) 265-4440 Elliott & Frantz King of Prussia (610) 279-5200 Medico Industries Stroud Township (570) 420-0877 Wilkes-Barre (570) 825-7711 Reco Equipment, Inc. Cranberry Township (724) 779-4646

Rhode Island ATS Equipment Rehoboth (508) 379-6200 Bobcat of Rhode Island Compact Machines Only Warwick (401) 921-4300

Virginia Elliott & Frantz Manassas (703) 257-2381 Link-Belt Mid Atlantic Ashland (804) 798-2290 Chesapeake (757) 485-4485 Hawkins-Graves, Inc Lynchburg (866) 847-6677

West Virginia Anderson Equipment South Charleston (304) 756-2800 Pleasant Valley (304) 366-3075

2019

Page 66 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

MINI & COMPACT Equipment

buyers’ guide

By Giles Lambertson

CEG CORRESPONDENT

OR 60 YEARS,

]

Construction Equipment Guide has been a trusted source of information about new and used pieces of equipment, construction industry issues, and public and private sector projects. Industry pros depend upon the publication to stay abreast of equipment news. The Buyers Guide reflects that marketplace experience. This Buyers Guide is about the “mini” and compact equipment that has proliferated over the last couple of decades. In the 1950s, the construction industry began employing small machines instead of human backs or dragging out large machines for relatively small tasks. It was the result of the work of inventive blacksmiths like Ed Malzahn, an Oklahoman who early in that decade built a ditch-digging device he called a Ditch Witch. About the same time, a couple of Minnesota blacksmiths crafted what they called the Keller selfpropelled loader. The small threewheeled machine pretty quickly evolved into what they rebranded a Bobcat skid steer. These significant inventions spurred miniaturization of serious construction machinery. Backhoes — themselves a downsizing of massive crane diggers — were supplanted on some job sites by mini-excavators. In time, earth-moving tasks like digging, auguring, leveling and loading were given over to compact wheel loaders and skid steer and track loaders configured with specialized attachments. Not satisfied with such resizing, manufacturers further shrank the machines by creating “mini” versions of the tools in walk-behind or stand-on models. Today, do-it-yourself property owners, landscapers, farm operators, contractors, municipal and factory management rely upon small motorized equipment to do jobs they used to hire others to do or accomplished less efficiently using larger machinery. It is a true revolution. If you are thinking about buying or renting a mini or compact machine, you are a part of it.

If You’re Buying Buyers of compact and mini equipment certainly are not all alike. They are homeowners doing weekend work, or a small concrete contractor, or a multinational company with fleets of equipment. In each case, a buyer shops for the machine that will most efficiently complete a job. Following are some considerations in evaluating the equipment: 1) Machine size and configuration Having decided to go small, the decision-making doesn’t end there. If the task is lifting, the question is, how high? If trenching is the job, how wide or deep or long will the ditch be? And if you’ll be trenching all day, SEE GUIDE PAGE 68

constructionequipmentguide.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 67

Authorized Bobcat Dealers

MARYLAND Crownstone Equipment Bobcat of Frederick 301-378-0491 Bobcat of Hagerstown 301-634-2558 www.CrownstoneEq.com

Metro Bobcat, Inc. Eldersburg 410-795-1500 Forestville 301-568-1104 Gaithersburg 301-840-9300 White Marsh 410-483-0600 www.metrobobcat.com

NEW JERSEY Bobcat of Central Jersey Green Brook 732-752-0002 www.gardenstatebobcat.com

Bobcat of New Jersey Totowa 973-774-9500 www.njbobcat.com

Garden State Bobcat, Inc. Freehold 877-GSB-BCAT www.gardenstatebobcat.com

NEW YORK Bobcat of the Finger Lakes Fairport 585-223-4056 www.djmequipment.com

Robert H. Finke & Sons Inc. Selkirk 888-266-9821 • 518-767-9331 www.finkeequipment.com

Bobcat of Saratoga Gansevoort 877-461-5065 www.bobcatofsaratoga.com

Summit Handling Systems, Inc. Walden 845-569-8195 www.summitbobcat.com

NOTT ALL EXCAV E VATOR RS ARE CREATED C D EQUAL. EQUAL

PENNSYLVANIA Crownstone Equipment Bobcat of York 888-243-9029 Bobcat of Adams Co. 888-243-9029 www.CrownstoneEq.com

Proven performance. More M comfort. Better design. The redeesigned, revolutionary lineup of Bobcat at® compact excavators has it all. Dig and slew with more power, stability and confiddence.

Bobcat of Lancaster Ephrata 717-859-4646 www.bobcatoflancaster.com

Highway Equipment & Supply Co. Drums 570-788-1127 www.hwyequipbobcat.com

Reading Tractor and Equipment Leesport 610-926-2441 www.readingtractor.com

DELAWARE Bobcat of New Castle New Castle 302-319-5450 www.gardenstatebobcat.com

Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Boobcat Company in the United States and various other countries.

CONNECTICUT

MASSACHUSETTS

NEW HAMPSHIRE

RHODE ISLAND

Bobcat of Connecticut

Bobcat of Greater Springfield

Bobcat of New Hampshire

Bobcat of Rhode Island

East Hartford 860-282-2648 www.bobcatct.com

West Springfield 413-746-4647 www.bobcatct.com

Hudson 603-224-1234 www.bobcatnh.com

Warwick 401-921-4300 www.bobcatct.com

Bobcat of Stratford

Bobcat of Worcester

Stratford 203-380-2300 www.bobcatct.com

Worcester 508-752-8844

Page 68 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

MINI & COMPACT EQUIPMENT GUIDE FROM PAGE 66

buyers’ guide

do you want to sit or stand? Do you need a trencher or, perhaps, an excavator? Do tight quarters require an articulated machine? If the ground is soft, a track loader might be the answer. Pushing snow? A wheeled skid steer does it better. A variety of jobs in mind? Think attachments. Decisions, decisions…. 2) Manufacturer support and warranty Manufacturing of compact machinery does not require the same capitalization as building machines as big as a house. Consequently, smaller companies can do it. Buyers should think about how much support a manufacturer or dealer can provide in the event a small or mini machine suffers catastrophic failure. A “good deal” can be a bad deal if an engine blows, an undercarriage repeatedly fails, a hydraulic system chronically leaks. Safeguards against such misfortune are a supportive dealer and an ironclad manufacturer warranty. 3) New or used What’s the new machine going to cost? That’s the bottom line. A used track loader will cost less than the same model bought new. What a buyer should consider is whether a machine is for production work or will be utilized in a supporting role. The latter is perfect for second-hand machinery. The rest of the story is about support. New machines come with warranties. Yet a machine from a rental fleet will have extensive maintenance records — which can be the next best thing to a warranty. Shop prudently and wisely.

If You’re Renting/Leasing Periodic or one-time tasks — think fence-building or site preparation — may warrant acquiring a piece of equipment for a weekend or a week, just long enough to compete the job. No sense owning a machine that sits idle for long periods. But productivity is the bottom line for rented equipment, too, so go to the rental lot knowing how to get the most for your money. 1) Get a little more machine than you need This is where good management shows itself. Scenario: A pipeline needs running from a water main to a new shop a half mile away. A 50-hp ride-on trencher will dig a ditch deep and wide enough to accommodate the line. Rental cost: $1,240 for a week. But wait: A 5-ton mini-excavator with a narrow bucket only costs $30 more per week. Why not get the excavator and complete some other loading and digging tasks? Why not indeed. 2) Trust, but verify the deal Independent rental companies and OEM dealerships stay in business by satisfying customers. Still, as a former president once said, “Trust, but verify.” Researching a firm or dealer is a good idea. Go online. Talk to people who have rented equipment. Ask questions. Does the firm back up its equipment? What happens if a chain breaks? Which loader brand is deemed most reliable? In the end, low rental rates aren’t everything.

Tips on Inspecting Used Compact/Mini Equipment Compactness can conceal. When mechanisms and systems are neatly fitted into small spaces, even cursory examination can be frustrating. Nevertheless, buyers should seek out telltale signs of abuse or poor maintenance. Here are some things to focus on:

constructionequipmentguide.com

1) Hydraulic systems Compact machines perform big-time tasks because of their hydraulic systems. The oil is a multiplier that gives skid steers, mini-excavators and other small machines outsize performance. So, ensuring that the hydraulic system is functioning without leaking is important. Chronic leaks are identifiable by oil residue on the frame. Operating the machine can reveal seals without integrity as well as weakness in a pump. 2) Major moving parts A trencher without a smoothly operating bar and chain is a problem. The same is true for a compact excavator that rotates haltingly on its base or a small articulated loader with a rumbling hinge joint. Components that are central to a machine’s operation must be fully functional for a piece of equipment to be of value. Lesser components — say a balky cab door or worn-out quick-attach unit — can be replaced. The major parts are something else. 3) Undercarriage When everything rides on something, the “something” must be flawlessly reliable. That is the case with track undercarriages. If a piece of equipment can’t move, it is just a piece of iron. So, tracks and their auxiliary pieces — tensioners, sprockets, suspension system (if any) — should be in generally good condition. Excessive wear of one or more components suggests overall poor maintenance. Look for a machine with a sound undercarriage. SEE GUIDE PAGE 70

Construction Equipment Guide â&#x20AC;¢ Mini & Compact Equipment Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 25, 2019 â&#x20AC;¢ Page 69

ADVANCED TECHnnoLoGY

Â®

WO ORLD LEADER

Innovation and quality is what Takeuc a chi is known for. Our family of great machines have been a part of the con nstruction industry forr over 50 years. Wh PERFORM When MANCE RELIABILITY MANCE, Y and d PROFIT matter tt , you y deserve d a ZRUOG OHDGHU RQ \RXU WHDP 7DNHXFKL Rá&#x201A;&#x2021;HUV D ZLGH UDQJH RI H[FDYDWRUV track loaders, w wheel loaders and skid d steer Loaders to help p you get your job done.

Ta akeuchi Fleet Manag gement is available on most models. See your dealer for details. etails.

< Forr more information on th his model or any other great Ta akeuchi machine, visit takeuchi-us.com > 520-0877

CHAPPELL TRACTOR ANDERSON EQUIPMENT COMPANY

www.chappelltractor.com

www.andersonequip.com

454 Route 13 South â&#x20AC;¢ Milford, NH 03055 603/673-2640 251 Route 125 â&#x20AC;¢ Brentwood, NH 03833 800/616-5666 391 Loudon Road â&#x20AC;¢ Concord, NH 03301 800/358-6007

18 Gorham Industrial Pkwy Gorham, ME 04038 207/591-5482 142 Target Industrial Circle Bangor, ME 04401 207/942-0177 4176 Route 417 Allegany, NY 14706 716/372-8822 720 E Franklin Street Endicott, NY 13760 607/748-3400 115 Middle Road Henrietta, NY 14467 585/334-6770

2140 Military Road Tonawanda, NY 14150 717/877-1992 6317 Thompson Road Syracuse, NY 13206 315/463-8673 912 Albany Shaker Road Latham, NY 12110 518/785-4500 151 Packard Road East Montpelier, VT 05651 802/223-9689 1 Andyâ&#x20AC;&#x2122;s Way South Charleston, WV 25309 304/756-2800

CHADWICK-BAROSS

MEDICO INDUSTRIES, INC. www.medicoind.com 3647 Shaferâ&#x20AC;&#x2122;s Schoolhouse Rd. Stroud Township, PA 18360 570/420-0877 1500 Highway 315 Wilkes-Barre, PA 18702 800/633-0027

GROFF TRACTOR & EQUIPMENT INC www.GroffTractor.com

NORRIS SALES COMPANY www.norrissales.com 1010 Conshohocken Road â&#x20AC;¢ Conshohocken, PA 19428 610/279-5777 668 Berlin Cross Keys Road, Sicklerville, NJ 08081 856/740-1400

Cranberry Township, PA 724/898-1535 Ebensburg, PA 814/472-7300 Ephrata, PA 717/738-0220

Mechanicsburg, PA 717/766-7671 New Stanton, PA 724/755-0124 State College, PA 814/353-8400

A. MONTANO CO., INC.

GT Mid Atlantic

www.amontanoco.com

www.gtmidatlantic.com

571 Route 212 â&#x20AC;¢ Saugerties, NY 12477 845/247-0206

www.chadwick-baross.com

ALL ISLAND EQUIPMENT

15 Katrina Road â&#x20AC;¢ Chelmsford, MA 01824 978/256-9571 â&#x20AC;¢ 800-804-0775 31 James P. Murphy Industrial Hwy â&#x20AC;¢ West Warwick, RI 02893 401-640-9303

39 Jersey Street â&#x20AC;¢ West Babylon, NY 11704 631/643-2605

www.allislandequipment.com

Greenwood, DE 800/756-9433 Aberdeen, MD 410/575-6580 Upper Marlboro, MD 301/627-3938 Baltimore, MD 410/247-7454

Frederick, MD 301/682-4441 Freehold, NJ 732/780-4600 Totowa, NJ 973/785-4900 Vineland, NJ 856/697-1414

Page 70 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

MINI & COMPACT

buyers’ guide

EQUIPMENT

GUIDE FROM PAGE 68 4) Straight and true arms Compact excavators nimbly slice, dig and load dirt on the strength of their hinged booms. Trenchers create neat narrow ditches employing rotating chains riding an extended bar. Track loaders do their versatile work with attachments at the end of their lift arms. All of these appendages are subject to stresses. Visually and in live operation determine if arms or booms are bent or cracked or otherwise significantly misaligned. That is a red flag. 5) Electrical system Unless a machine is relatively old, an electrical system is apt to be sound. Indications of an unsound system include wiring with frayed covering or exposed core wires, battery posts that are corroded, loose and fired electrical fittings, wires that dangle instead of being affixed to the frame and so on. These poorly maintained components could be an indication of an unreliable electrical system, which reduces the value of a machine.

What You Can Expect to Pay Mini and compact machinery are not cheap because they are well-made and contain modern electronics, which never are inexpensive. But the machines are wonderful labor-savers and highly productive pieces of equipment. They are worth the cost, in other words. Here are some examples of pricing: • New - Mini: A 20-hp walk-behind trencher with a 6-inch-wide cut is priced at $12,000; a 25-hp mini-track loader with a 1,000-lb operating capacity can cost $34,500. - Compact: A 74-hp compact track loader with an automatic track-tensioning system is priced at $49,000; a 91-hp skid steer with a vertical lift boom costs $80,000. • Used - Mini: A 34-inch-wide, 22-hp mini-track loader with eight hours on the engine costs $17,900; a 25-hp, wide-track utility loader with 175 hours is priced at $28,500. Compact: A 74-hp compact radial lift skid steer with 13 hours on it is priced at $33,000; a 25-hp compact excavator with 99 hours has a price tag of $40,000. • Rent / Lease An online survey indicates… - a 24-inch walk-behind trencher can cost $200-250 a day, $550-650 a week and $1,200-1,400 a month - a mini-skid steer with 500-lb. lift capacity can cost $225-275 a day, $750-800 a week and $1,700-1,800 a month - a 3,0000-lb. compact track loader can cost $600-650 a day, $1,5001,600 a week and $3,000-4,000 a month - a compact articulated wheel loader with a one-yard bucket can cost $350-400 a day, $900-1,000 a week and $2,800-3,100 a month SEE GUIDE PAGE 76

constructionequipmentguide.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 71

CH HANGING TH HE

LAN NDSC CAP PE

JCB’s game-changing T Teleskids eleskids and range of o compact excavators are machines that’ll hat’ll take your landsscaping business to the next level. The T Teleskid’s eleskid’s telescopic boom allows youu to lift higherr,, reachh further and dig deeper than ever befo fore. Now you can reach over silt fencces and obstacles, load high-sided trucks without a ramp, dig a ditch or mow down a slope. And JC CB compact excavvators are purpose-built to offer you thhe very best in performance, reliability, serviceability, comffort and control. With JCB on your teaam, you have the power and profit-making potential to change the landscape foreverr.. Contact yo our local JCB dealer today to sch hedule a demo.

Chesapeake Supply & Equipment Co. 12915 S DuPont Hwy Felton, DE 19943 800/282-8522 8366 Washington Blvd. Jessup, MD 20794 800-483-0885

www.equipmentbychesapeake.com

Earthborne JCB

Farm-Rite, Inc.

35 Easton Rd. Warrington, PA 18976 215/343-2000

122 Old Cohansey Rd. Bridgeton, NJ 08302 856/451-1368 717 White Horse Pike Hammonton, NJ 08037 609/561-0141

www.earthborneinc.com

www.farm-rite.com

/ /JCBNA

@JCBNA

Liftech JCB 6847 Ellicott Dr. E. Syracuse, NY 13057 315/463-7333 4381 Walden Ave. Lancaster, NY 14086 716/684-9040

2820 Curry Rd. Schenectady, NY 12303 518/356-5932 33B Commerce Ave. S. Burlington, VT 05403 802/864-0308

241 Paul Rd. Rochester, NY 14624 585/328-6380

www.liftechequipmentjcb.com

w w.jcb.com .jcb.com JCBNA www

Stephenson JCB 7201 Paxton St. Harrisburg, PA 17111 800/325-6455 135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033 137 Armstrong Rd. Pittston, PA 18640 866/667-6756

796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191

www.stephensonequipmentjcb.com

4910

Page 72 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

www.komatsune.com 2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

www.midlanticmachinery.com 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145

6 S. Eleanor Ave. Frackville, PA 17931 570/874-6140

6375 Allentown Blvd. Harrisburg, PA 17112 717/652-3190

1400 Joh Avenue Baltimore, MD 21227 410/247-2100

1261 Highway 315 Wilkes Barre, PA 18702 570/824-9891

28587 Sussex Hwy. Laurel, DE 19956 302/715-5382

www.NorrisSales.com

www.allislandequipment.com

1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 1-800/457-RENT (7368)

39 Jersey Street West Babylon, NY 11704 631/643-2605

668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 866/80-TOOLS (86657)

sales@admarsupply.com www.admarsupply.com 878 Old Albany Shaker 2390 Rochester Road Road Canandaigua, NY 14424 Latham, NY 12110 585/396-0031 518/690-0750 3001 West 17th Street 449 Commerce Road Erie, PA 16505 Vestal, NY 13850 814/833-7761 607/798-0333 1950 Brighton Henrietta 1394 Military Road Town Line Road Tonawanda, NY 14217 Rochester, NY 14623 716/873-8000 585/272-9390

7800 Brewerton Road Cicero, NY 13039 315/433-5000 121 Armstrong Road Pittston, PA 18640 570/299-5505

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 73

ERB & HENRY EQUIP. INC. www.erbhenry.com 22-26 Henry Ave. New Berlinville, PA 19545 610-367-2169

F&W EQUIPMENT www.fwequip.com 164 Boston Post Road Orange, CT 06477 203-795-0591

ADMAR Construction Equipment & Supplies www.admarsupply.com 800-836-2367 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Rd. Buffalo, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031

ABLE Equipment Rental Kubota Sales & Rentals 1050 Grand Blvd. Deer Park, NY 11729 866-468-2666 631-841-3333 www.ableequipment.com

CHAPPELL TRACTOR www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603-673-2640

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 615 State Route 33 Millstone Township, NJ 08535 732-446-7600

1950 Brighton-Henrietta Town Line Rd. Rochester, NY 14623 585-272-9390 7800 Brewerton Rd. Cicero, NY 13039 315-433-5000

Page 74 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

NORTRAX www.nortrax.com 1505 Caribou Road • New Canada, ME 04743 207/834-6701 34 Page Road West • Hermon, ME 04401 207/947-6786 106 North Street • Houlton, ME 04730 207/532-6517 396 County Road • Westbrook, ME 04092 207/773-3777 98 Sheep Davis Road • Pembroke, NH 03275 603/225-2769 14 The Crossing Boulevard • Clifton Park, NY 12065 518/371-5111 1486 US Highway 11 • Gouverneur, NY 13642 315/287-0703 300 Clinton Street • Springfield, VT 05156 802/885-6840

LiuGong 9018 F-Series Mini-Excavator Exceeds North American Specifications LiuGong North America, headquartered in Katy, Texas, has announced the arrival of its first new F-series excavators for dealer review. The 9018F is a reduced tail-swing, 1.9 ton (1.8 t) mini-class excavator presently undergoing evaluation. It has been designed to meet or exceed North American market design specifications. The 9018F represents the smallest of the powerfully efficient, 6th generation LiuGong F-Series excavator models. Its compact dimensions and retractable undercarriage alone give its users several transportation and application benefits. The unit is available with both a closed pressurized cab, featuring heater and window defroster, as well as a canopy design. The closed cab 9018F version stands just 7 ft. 9 in. (2.3 m) tall, resulting in a lower height that all but eliminates headspace concerns while traveling through tunnels and beneath overpasses. The 9018F unit’s short stature combined with a retractable undercarriage give its operator access to the most restrictive workspaces. Its 51-in. (129 cm) outside tread to outside tread measurement retracts to just 39 in. (99 cm), allowing it to easily pass between onsite obstructions and through almost any bay door. Application Versatility Its versatility is not solely a result of its compact size. The 9018F is a powerful, robust base unit for a variety of attachments. It also supports the installation of consumer-requested aftermarket add-ons. Mike Watt, product manager, LiuGong NA Excavators, said, “Right now we’re working toward 2D control on our full-size excavators, and in the future this technology will be available to our compact excavator line. Additional technology will be made available later, pending customer review.” The upgrades may include electronic monitoring of bucket trajectory and operator assist for better efficiency of the excavator on work sites, Watt said. F-Series excavators like the 9018F also permit consumers to install most of the latest 3rd-party technologies such as offered by Trimble for gradeability. Telematics also will be

available as an aftermarket add-on. Standard 9018F features include a low-speed, hightorque, Tier IV Final, Yanmar engine rated at 18 gross hp (17 net hp). Back-filling or dozer operation no longer requires the operator to remove his or her hand from blade control to change travel speed. By simply pressing the top of the handle, an operator can now select high-rabbit or low-turtle speed travel. Better fuel consumption is achieved through a more efficient hydraulic system using 15 to 20 percent less engine power than that of its predecessor. An improved load-sensitive hydraulic system with 14.5 gpm main pump displacement utilizes a proportional control valve for better management of flow distribution for all attachments. Flow rate for the hammer-shear and hydraulic thumb is set right from the operator’s monitor. A LiuGong hydraulic thumb (“bucket grabber”) comes standard with the unit. Travel pedals and joysticks give an operator hydraulic control for machine fuctions: travel, boom, boom swing, arm, and bucket. Auxiliary hydraulic functions are controled by electrical proportional solenoids for precise control. LiuGong NA offers a 3 year / 4,000 hour end-to-end coverage warranty for its 9018F. 9018F Specifications • Operating weight (with cab): 4,189 lb. • T4F Yanmar engine: 18 hp (gross), 17 hp (net) • Max pump flow rate: 14.5 gpm • Max pressure: 3,046 psi • Standard bucket capacity: 0.06 cu. yd. • Bucket/cutting width: 19.5 in. • Bucket breakout force: 3,597 lbf • Arms stick force: 2,023 lbf • Digging depth: 7 ft. 6 in. • Swing speed: 9.5 rpm • Arm length: 3 ft. 6 in. • Max dump height: 7 ft. 9 in. (digging height 11 ft. 1 in.) • Horizontal reach: 10 ft. 11 in. (at 3 ft. 3 in. height) 

375 Engineers Drive • Williston, VT 05495 802/658-2121

RUDD EQUIPMENT COMPANY www.ruddequipment.com 4344 Poplar Level RD • Louisville, KY 40213 502/456-4050 Pittsburgh, PA 412/741-1731 Clearfield, PA 814/765-8500 Charleston, WV 304/755-7788

SCHMIDT EQUIPMENT INC. www.schmidtequipment.com 80 Southbridge Rd. • North Oxford, MA 01537 508/987-8786 Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 75

W.I. CLARK COMPANY www.wiclark.com 30 Barnes Industrial Park Rd • Wallingford, CT 06810 203/265-6781 Danbury, CT 06810 203/775-1203 Plainfield, CT 06374 860/546-4808

FIVE STAR EQUIPIMENT, INC. www.fivestarequipment.com 60 Paul Rd. • Rochester, NY 14624 585/235-3011 1653 NY Route 11 • Kirkwood, NY 13795 607/775-2006 284 Ellicott Rd. • Orchard Park, NY 14127 716/662-2191 6500 E. Taft Rd. • Syracuse, NY 13057 315/452-4560

ELLIOTT & FRANTZ, INC.

ELLIOTT & FRANTZ, INC. www.elliottfrantz.com 6680 Allentown Blvd. • Harrisburg, PA 17112 717/652-5430 10421 Guilford Road • Jessup, MD 20794 301/725-7394 38420 Sussex Highway • Delmar, DE 19940 302/846-3033 12051 Tac Court • Manassas, VA 20109 703/257-2381 450 E. Church Road • King of Prussia, PA 19406 610/279-5200

JESCO, Inc. www.jesco.us 118 St. Nicholas Ave. • South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fairfield, NJ 07004 973/227-2221 800/321-8080 Lumberton, NJ 08048 609/267-2020 888/217-0600 Beacon, NY 12508 845/831-1800 800/724-0725 Deer Park, NY 11729 844/482-0910

EFFICIENC CYY.

RELIABIILITYY.

DURA U ABILITY. HitachiConstruction.com

Page 76 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

MINI & COMPACT EQUIPMENT GUIDE FROM PAGE 70 1) Sit or stand? At the nexus of mini and compact machines is a quandary: Which configuration will work best for your situation? A large stand-on trencher might be sufficient for tasks, but the sit-down operator’s platform on a compact trencher can increase productivity. What to buy? If your choice really is between a large rideon machine and a sit-down model, going with the larger machine nearly always is the better choice. It offers the prospect of more versatility and productivity, plus can mean higher resale value if you ever trade up.

2) How much versatility? Purchasers of a compact or mini machine of some kind usually have a primary job in mind. An even better mindset is to consider the bigger picture. You want the track loader to clean up job sites and perform other support work. But if you get a skid steer, which sometimes performs better in snow, you could put it to use in the off-season clearing parking lots. Similar calculations can be made about mini-excavators, wheel loaders, dumper trucks and other compact machines. What might be their secondary application? 3) How much auto is enough? Software and related technology incorporated into today’s mini and compact equipment offer precise automatic controls that eliminate human approximation. Think bucket grade and tilt controls on loaders and excavators. Depth controls. Return-to-grade controls. Hydrostatic settings. It’s revolutionary but also can be pricey. However, does your work really require grading to be within millimeters of accuracy? Can you select and shift gears manually and still do a first-class job? Don’t pay for luxury for the fun of it. 4) Dealer support Compact and mini equipment does serious work and deserves serious support systems. Sometimes it needs more support than bigger pieces of equipment because its smaller engines and lighter dimensioned tools are overstressed compared to a larger piece of equipment performing the same task. What kind of OEM engine and components warranty backs that mini-excavator? How responsive and trained is the local dealership that will maintain the machine? Buy with service and support in mind. 5) Beware of brand loyalty Loyalty to a manufacturer isn’t like loyalty to a professional athletic franchise. In the working world, there is no special camaraderie on “game days.” Dealers are happy to have you on their “team,” but the relationship is openly built on dollars and cents, not transitory sporting glory. So, shop for value. Explore a range of manufacturers. If the characteristic handling of a certain brand’s products appeals to you, for example, set aside the preference and at least try another. There is a world of good products out there.

Popular Manufacturers of Mini/Compact Machinery 1) ASV-Yanmar — The Minnesota firm ASV introduced Posi-Track rubber track systems in 1990. This year, it merged with Japanese equipment manufacturer Yanmar. The two divisions produce track loaders, skid steers, excavators, track carriers and wheel loaders. SEE GUIDE PAGE 80

constructionequipmentguide.com

buyers’ guide

Specs and Features to Consider

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 77

MORE POWER. SPEED. PRODUCTIVITY.

800.205.9913

Get ready to do more work in more places than ever before. We offer our customers the only compact track loaders specifically built for the demands of the forestry industry. ASV’s RT-120 Forestry and RT-75 Heavy-Duty are made with more durability, power and performance than anything else on the market. With ASV’s innovative undercarriage and efficiency-enhancing features, you’ll be mulching and brush clearing faster and better than anyone else. CHOOSE ASV. YOUR TOUGHEST JOBS DON’T STAND A CHANCE. R T- 7 5 H D

FIND OUT MORE AT: asvi.com

Modern Group, Ltd.

Barry Equipment Co., Inc.

Skyworks, LLC

C.N. Wood

Baschmann Services, Inc.

Jersey Rents

www.moderngroup.com

www.barryequipment.com

www.skyworksllc.com

www.cn-wood.com

www.baschmann.com

www.jerseyrents.com

2501 Durham Road Bristol, PA 19007 855-299-7698

30 Birch Island Road Webster, MA 01570 508-949-0005

955 Spencer Road Syracuse, NY 13204 315-455-2600

200 Merrimac Street Woburn, MA 01801 781-935-1919

1101 Maple Road Elma, NY 14059 716-219-7045

252 Atlantic City Blvd. Bayville, NJ 08721 732-361-4487

224 N. Main Street Building T Horseheads, NY 14845 607-442-0508

140 Wales Avenue Avon, MA 02322 508-584-8484

2092 Route 57 Washington, NJ 07882 908-835-0100

102 State Road Whately, MA 01093 413-665-7009

140 Bilmar Drive Pittsburgh, PA 15205 412-921-1000

84B Warren Avenue Westbrook, ME 04092 207-854-0615

6352 Chapmans Road Allentown, PA 18106 800-459-4659

60 Shun Pike Johnston, RI 02919 401-942-9191

Page 78 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 79

Chadwick-BaRoss, Inc. www.chadwick-baross.com 15 Katrina Road Chelmsford, MA 01824 800-804-0775 31 James P. Murphy Industrial Hwy West Warwick, RI 02893 401-640-9303

Contractors Sales Company www.contractorssales.com 121 Karner Road Albany, NY 12212 518-456-1445 • 888-468-5479 1283 Dolsontown Road Middletown, NY 10940 845-956-0222

Chappell Tractor www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603-673-2640 251 Route 125 Brentwood, NH 03833 800-616-5666 391 Loudon Road Concord, NH 03301 800-358-6007

Heavy Machines, Inc. www.heavymachinesinc.com 159 North Avenue Skowhegan, ME 04976 888-875-3954 2401 Broadway, Building #3 South Portland, ME 04106 877-202-1275

Norris Sales Company www.norrissales.com 1010 Conshohocken Road Conshohocken, PA 19428 610-279-5777 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856-740-1400

Link-Belt Mid-Atlantic Construction Equipment www.Link-BeltMidAtlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248 Frederick, MD 833-546-5235

Page 80 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

MINI & COMPACT

buyers’ guide

EQUIPMENT

GUIDE FROM PAGE 76 2) Bobcat-Doosan — Bobcat invented the skid steer in 1958. Now a division of South Korea’s Doosan, the combined company produces a full range of compact machinery including skid steers, track loaders, mini- and wheeled excavators, and telehandlers. 3) Boxer — This Michigan company offers a family of niche products: four stand-on mini-skid steers, the largest a 20-hp gas-powered model with 380lb. lift capacity. Boxers can be quick-attached to bucket, trencher, auger, fork, excavator, sweeper and blade tools. 4) Case — This Wisconsin company built the first fully integrated backhoeloader in 1957 — and has built a half million of them. Today, CNH Industrial’s product line also includes skid steers, track loaders, mini-excavators, and compact dozers and wheel loaders. 5) Caterpillar — This storied Illinois equipment firm builds an array of small

construction machinery including backhoes, track loaders, small dozers, and mini-excavators. The compact excavator line alone includes 12 models ranging from 13 to 70 hp. 6) Deere — Another Illinois manufacturer, Deere Construction offers a full line-up of compact equipment. Its products include compact excavators, track loaders, skid steers and wheel loaders. The wheel loader line has five models, from 60 to 100 hp. 7) Ditch Witch — This pioneering Oklahoma company was built on its trenching machines, which today includes seven walk-behind models, six ride-on units, a stand-on model and three quad-track versions. It also manufactures a full line of directional drilling equipment. 8) Hitachi — This Japanese firm opened its doors in 1910 as an electric motor repair shop. Today, it exclusively builds hydraulic excavators — a product focus that it boasts about in advertisements. Among its excavators are six compact models ranging from 15 to 53 hp. 9) JCB — A British firm, JCB has been a manufacturer of innovative construction equipment since 1945. It built backhoes early on and today is a leading manufacturer of compact track loaders, skid steers, mini-excavators, telehandlers and wheel loaders. 10) Kubota — Launched in 1890 as a cast iron manufacturer, the Japanese company has become a global equipment manufacturer. Its compact equipment lines for construction include small tractors, mini-excavators, track loaders, skid steers and wheel loaders. SEE GUIDE PAGE 82

constructionequipmentguide.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 81

The BIIG news in cru ushing & screenin ng is actually … compact. pact

Screen Machine is now offfering fering SMI Compact Crushers and d 6FUHHQLQJ 3ODQWV 7KHVH PDFKLQHV DUH VLJQL¿FDQWO\ VPDOOHU than the standard Crushers and Screens that Screen Machine KDV EHHQ PDNLQJ IRU PRUH WKDQ \HDUV $ERXW WKH VL]H H LQ L

SMICompact.com

IDFW 7KDW PDNHV 60 0, &RPSDFW HTXLSPHQW LGHDO IRU D YDULHW\ RI XVHV LQ SODFHV ZK KHUH ODUJHU PDFKLQHV VLPSO\ FDQ¶W JR 9LVLW www.SMICompact.com com for more details about the BIG news i crushing in hi & screen ning ... SMI Compact.

740-927-3464 800-837-3344

email@SMICompact.com

Page 82 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

MINI & COMPACT EQUIPMENT GUIDE FROM PAGE 80

Brief Summary

constructionequipmentguide.com

buyers’ guide

11) LiuGong — A 60-year-old Chinese company, LiuGong manufactures both massive mining and construction machinery and smaller models. Its compact equipment includes wheel loaders, skid steers, track loaders and mini-excavators, the smallest a 24-hp model. 12) Manitou — This French company bought Gehl in 2008, which bought Mustang Manufacturing in 1997. The three brands of compact equipment include track loaders and skid steers, articulated loaders, compact excavators and compact telehandlers. 13) New Holland — In the late 19th century in Pennsylvania, New Holland was founded. It was an early manufacturer of backhoe-loaders. In 2019, it builds farm equipment and popular models of compact loaders, skid steers, wheel loaders and excavators. 14) Takeuchi — This Japanese firm claims to have built the first mini-excavator in 1971. Its excavator lineup today Mini and compact construction equipment have transformed business includes 11 models ranging from 11 to 114 hp. The manufacstrategies for small and major contractors alike. The small machines turer also produces respected track loaders, skid steers and wheel loaders. have introduced new paradigms of productivity for large fleets. 15) Terramac — This specialty manufacturer is headIndividuals and small businesses also benefit because they can self-perquartered in Illinois and produces several models of a form what they used to hire out. The continued evolution of these miniacrawler carrier, which is a tracked version of a small truck with a flatbed or box bed. Its compact version is a 155-hp turized pieces of equipment — now including robotic functions — will unit with 12,000-lb. carrying capacity. continue to spur new applications. And proliferation of the equipment 16) Toro — This Minnesota manufacturer of turf, landmeans buyers have many second-hand machines to choose from.  scape, and snow equipment also owns, among other brands, Ditch Witch. Its Dingo line of walk-behind and stand-on utility loaders includes a 49-hp telescoping arm model that can lift more than 1,500 lbs. 17) Vermeer — A 71-year-old Iowa firm, Vermeer has roots in farm equipment such as balers and rakes. However, it also fabricates a popular line of directional drills for utility work and stand-on, remote control and ride-on trenchers, plus four mini-skid steers. 18) Volvo — This Swedish company manufactures a wide range of machinery including trucks. Some better-known products are for the construction industry, including compact wheel loaders, skid steers, track loaders and 10 mini-excavators, including a wheeled one. 19) Wacker Neuson — A German firm dating to 1848, Wacker Neuson offers contractors an assortment of machines, including skid steers, track loaders, small excavators, wheel loaders and telescopic wheel loaders. It also makes a line of compact wheeled dumpers.

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 83

Abele Tractor & Equipment Co., Inc.

ADMAR Construction Equipment & Supplies

Eagle Power & Equipment Company

Albany, NY 12205 518/438-4444

Vestal, NY 13850 607/798-0333 Tonawanda, NY 14217 716/873-8000 Canandaigua, NY 14424 585/396-0031 Rochester, NY 14623 585/272-9390 Cicero, NY 13039 315/433-5000

West Chester, PA 19380 610/458-7054 Doylestown, PA 18901 215/348-9041

www.abeletractor.com

www.cherryvalleytractor.com

Cherry Valley Tractor Marlton, NJ 08053 856/983-0111 www.erbhenry.com

Erb & Henry Equip., Inc. New Berlinville, PA 19545 610/367-2169

www.admarsupply.com

www.eaglepowerandequipment.com

www.farm-rite.com

Farm-Rite Inc. Shiloh, NJ 08353 800/752-6373 • 856/451-1368 Calverton, NY 11933 631/284-3127

www.fwequip.com

www.chappelltractor.com

F&W Equipment

Chappell Tractor

Orange, CT 06477 203/795-0591

454 Route 13 South Milford, NH 03055 603/673-2640

www.marshall-machinery.com

Marshall Machinery, Inc. Honesdale, PA 18431 570/729-7117 Swiftwater, PA 18370 570/895-4884 Middletown, NY 10940 845/343-6683 www.wtractor.com

Westchester Tractor Inc. Brewster, NY 10509 845/278-7766

www.ableequipment.com

ABLE Equipment Rental Deer Park, NY 11729 866/468-2666 631/841-3333

Highway Equipment Company www.highway-equipment.com

Millstone Township, NJ 08535 732/446-7600

Page 84 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Historical Mini and Compact Equipment HCEA photo

This is a 1962 P & H S-20 Stik-Clam, the earliest known compact excavator in the U.S. market and probably 30 years ahead of its time. The stick-mounted hydraulic clamshell could dig at a wide range of angles, including to a surprising height. HCEA photo HCEA National Director Dave Geis of Seward, Neb., is the owner.

ll images taken at Annual Conventions and Old Equipment Expositions of the Historical Construction Equipment Association.

HCEA photo

For many years, Struck Corporation has produced a line of tiny crawler tractors and loaders. This is a Magnatrack Junior.

In the 1920s and early 1930s, a surprising range of construction machinery was built upon the chassis of gasoline-powered industrial wheel tractors. This Austin Pup, a small three-wheel roller, is built around a Fordson tractor. Evan Gooch of Columbia, Tenn., is the owner. HCEA photo

HCEA photo

At one time, Sears Roebuck sold a limited line of construction machinery, and for many years yard and garden tractors have been part of its product line. This is a 1973 Sears SS16 Twin, outfitted with an optional loader, and it’s owned by Ede Hirchak of Hawk Point, Mo.

HCEA photo

The Byers Bearcat Junior, built in the late 1930s, was one of the smallest cable excavators built. With its swing boom, it is in a sense a forebear of today’s compact hydraulic excavators. HCEA National Director Larry Kotkowski is the operator.

Agricat offered a line of small crawler tractors, powered by Wisconsin gas engines, in the 1940s and 1950s. They could be equipped with either dozers or loaders. This example is part of a sizeable collection owned by Jeff Fildes of Grafton, Ohio.

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 85

EDWARD EHRBAR www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY 631/563-7600 New York City, NY 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088

KOMATSU NORTHEAST www.komatsune.com 2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73. Winslow Township, NJ 08095 856/767-5900

MIDLANTIC MACHINERY www.midlanticmachinery.com 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 State College, PA 814/308-5660 Baltimore, MD 410/247-2100 Wilkes-Barre, PA 570/824-9891 Frackville, PA 570/874-6140 Laurel, DE 302/715-5382

PINE BUSH EQUIPMENT www.pbeinc.com 97 NY-302 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

EAST PBE

www.andersonequip.com PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-5311 Somerset, PA 814/443-2867 NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822 NEW HAMPSHIRE Lancaster, NH 603/788-6595 Manchester, NH 603/627-7696 MAINE Bangor, ME 207/942-0177 Gorham, ME 207/591-5482 VERMONT East Montpelier, VT 802/223-9689

“WE’RE NOT A BIG COM MPANY A , BUT KOM MATTSU TREA ATTS US L LIKE WE AREE.”

www.cn-wood.com Avon, MA 508/584-8484 Woburn, MA 781/935-1919 Whately, MA 413/665-7009 Johnston, RI 401/942-9191

283 Pane Road Newington, CT 06111 860/665-7470

BETTER SUPPORT UPPORT. “My cousin Thomas and I started our construction company on a wing and a prayerr. We couldn’t have done one it without the financing, training, ning, tech assistance and support ort we received from Komatsu and our ur distributor. The products are top quality. They make us efficient ent at our job, and feel connected—like e they want to be our partner in this. That’s why Komatsu workss for us!”

Brian (left) and Thomas homas Cronin / Prosperity Construction onstruction / Jackson, MS

See Us at North Hall: N10825

That t’s s why y I am Komatsu t u komaatsuamerica.com

Page 86 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Screen Machine Launches Line of Bobcat Introduces Compact Crushing, Screening Plants E26 Mini-Excavator Screen Machine Industries LLC has announced the launch of its SMI Compact line of crushers and screening plants. The first public presentation of the SMI line occurred earlier in the year during a soft launch at the World of Asphalt Show and Conference and co-located AGG1 Aggregates Academy and Expo where the machines attracted a good deal of interest. According to Timothy Miller, director of business development of SMI Compact, the introduction of the line is a part of Screen Machine’s longterm business strategy that also includes the recent acquisition of Diamond Z. While in large part each business group will operate with a great deal of autonomy regarding its distribution channels, product lines and engineering, the overall corporate structure will benefit from greater market access, economies of scale, purchasing strength, warehousing capabilities and equipment and parts logistics. Miller sees the SMI Compact line as providing access to new markets while enhancing equipment options for existing customers. Industry professionals have come to recognize the benefits of employing smaller equipment for a number of tasks where space limitations or the scope of the job makes them an attractive alternative. Transportation, fuel economy and equipment costs are all factors that have contributed to the growing demand for smaller machines. At roughly 1/5 the size of the standard line crushers and screens that Screen Machine has been manufacturing and selling for more than a half century, the SMI Compact equipment is ideal for a variety of applications. “There’s really nothing else like the SMI Compact line in the marketplace, and we think it fills an existing void within the crushing and screening industry,” said Miller. Traditionally, crushing and screening machines have been larger units designed primarily for constant daily use in applications such as mining operations and recycling. As more contractors recognize that a good deal of their work does not require large machines and more see the benefit of process-

Ready for crushing on the construction site, the versatile 20TJ makes quick work of reinforced concrete, brick, porcelain and other aggregates materials.

ing or recycling materials on the jobsite, demand has grown for smaller machines that can be easily deployed for one- or two-day jobs and offered at a price point that makes them accessible to entry level contractors. The SMI Compact line is extremely well suited for work in urban areas where full-size crushing and screening machines are simply too large, as well as small-job applications, like driveway replacements, concrete renovation and landscaping work. The line also is ideal in rental markets for their ease of operation, rugged

to R-Series Lineup

The 50TJ Tracked Jaw Crusher is the largest of the SMI Compact line, capable of processing up to 50 tons per hour.

construction and transportability. “SMI Compact machines are also remarkably durable,” said Miller. “They are built with high-quality steel and reputable components. While they might be compact in stature, they are large in terms of productivity and profitability potential.” The current SMI Compact line consists of three tracked crushers, two stationary crushers and one tracked screening plant: • 50TJ Tracked Jaw Crusher — The largest of the SMI Compact line, capable of processing up to 50 tons per hour, the 50TJ is equipped with a jaw aperture of 16 in. x 28 in.; has a hydraulically driven variable speed vibratory grizzly feeder; and is powered by a Tier IV 75hp Deutz diesel engine. The unit can be set up in five minutes and is ideal for recycling, demolition and construction waste. The 50TJ comes equipped with dust suppression and a cross-belt magnet for removing steel from processed materials. The wireless, remote control system offers convenience and safety for the operator. At 23 ft. 10 in. long; 7 ft. 3 in. wide; a maximum height of 9 ft. 2 in. and weighing in at 26,000 lbs., the 50TJ is the only machine in the line that requires a semi-tractor trailer for transport. • 20TJ Tracked Jaw Crusher — Operated by remote control handset, the 10 in. x 20 in. track-mounted jaw crusher features a hydraulically driven vibratory feeder with standard dust suppression. Ready for crushing on the construction site, the versatile 20TJ makes quick work of reinforced concrete, brick, porcelain and other aggregates materials. The unit can be ready to work in five minutes and is powered by a Tier IV 25hp Kubota diesel engine. The 6,750-lb. unit is 14 ft. 5 in. long by 5 ft. 6 in. wide and can be transported from jobsite to jobsite by trailer. see SMI page 88

Minimal tail overhang allows the E26 to work in limited-space environments, including construction, landscaping and utility job sites and agriculture applications.

Bobcat Company is expanding its R-Series excavator lineup with the addition of the new E26. Redesigned with performance, uptime protection and operator comfort in mind, the E26 offers the same bold, distinct design excavator operators have come to expect from R-Series models. Minimal tail overhang allows the E26 to work in limitedspace environments, including construction, landscaping and utility job sites and agriculture applications. The excavator’s boom swing frame stays within the width of the machine’s tracks as it swings, making it easier to perform in confined jobsite conditions and next to buildings or other obstructions where larger earthmoving equipment, such as a tractor loader backhoe, can’t fit. Redesigned Comfort Features The R-Series E26 offers a 19 percent increase in glass surface area, providing operators a panoramic view of the job site — as well as a larger front panel for an enhanced view of the attachment. Bobcat also redesigned the E26 cab to be more spacious and provide extra comfort for operators of all see BOBCAT page 88

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 87

John Deere Collaborates With Customers for Upgrades John Deere has enhanced its lineup of five small-frame GSeries skid steers and compact track loaders, providing operators with even more power and efficiency on the job site. While the five models (312GR, 314G, 316GR, 317G, 318G) were introduced to the market more than three years ago, John Deere continually works with its customers in the landscaping, agricultural material handling and construction industries to better understand their needs and how to improve machinery for maximum productivity, uptime and solutions. “As we constantly source feedback from our customers, we heard them request minor improvements to the smallframe lineup, such as simplified maintenance, increased visibility and easier connections to attachments,” said Gregg Zupancic, product marketing manager, skid steers and compact track loaders, John Deere Construction

The small-frame G-Series model upgrades include protected auxiliary hydraulic lines that run within the boom for additional protection, ultimately extending the machine’s life cycle. The machines have an optional capability to support two sets of counter weights, providing the operator with greater stability and capacity to lift heavier materials.

& Forestry. “We used this as an opportunity to upgrade our equipment so that it meets their needs and continues to provide quality and performance that our customers expect.” The improved small-frame G-Series machines feature increased productivity and time-saving options. They can be equipped with an optional rearview camera and easyto-clean cab windows for additional visibility, safety and speed on the job site. The upgraded cab offers more comfort so operators can easily maneuver the machine and remain in the cab for longer durations on the job, without sacrificing performance. The small-frame cabs also include a new Bluetooth radio option, and the redesigned manual control levers have improved ergonomic grips for increased operator comfort and accessibility. The small-frame G-Series model upgrades also include protected auxiliary hydraulic lines that run within the boom for additional protection, ultimately extending the machine’s life cycle. The machines have an optional capability to support two sets of counter weights, providing the operator with greater stability and capacity to lift heavier materials. The newly integrated 4-point-tiedown system increases overall mobility and

impact on different jobs by enabling operators to securely and safely move the machine to different locations. Operators can streamline their daily maintenance tasks with color-coded fluid fills and key filters that are mounted for ease of access near the rear door. The small-frame models boast optimized air-conditioning ducts, improved cab pressurization and debris ingression, enabling operators to spend more time working and less time cleaning. Many components include zinc flake hardware for improved protection against corrosion and machine wear. Operators looking to get the most out of the 312GR, 314G, 316GR, 317G or 318G models can now leverage a five-year subscription to JDLink telematics, an application that allows operators to view critical information about machines in their fleet. The machine monitoring solution provides real-time data and health prognostics to suggest maintenance solutions that decrease costly downtime. Remote diagnostics enable a dealer to read codes, record performance data and even update software without a trip to the job site. For more information, visit www.johndeere.com/compact. 

Page 88 • December 25, 2019 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

New Screen Machine SMI Compact R-Series E26 Offers Line Features Six Different Models 19 Percent Increase in Glass Surface Area BOBCAT from page 86

sizes. New low-effort joystick controls are ergonomically designed for ease of use. Like other R-Series excavators, there is ample floor space in the E26 for the operator’s feet and legs. And with the cab quieter than ever before, operators will appreciate reduced sound levels while in the cab.

The SMI Compact line is extremely well suited for work in urban areas where full-size crushing and screening machines are simply too large, as well as small-job applications, like driveway replacements, concrete renovation and landscaping work. SMI from page 86

• 10TJ Tracked Jaw Crusher — The 7 in. x 16 in. track-mounted jaw crusher is a stand out unit that comes with dust suppression as a standard feature and employs easy to use manual controls and instant hydraulic adjustable jaws to process output product ranging from ¾ in. to 3 in. Ideal for landscapers, small builders and developers, the 10TJ is powered by a Tier IV 15hp Kubota diesel engine and the 56 in. x 41 in. hopper can be fed with a skid steer. • 20SJ Stationary Jaw Crusher — This

10 in. x 20 in. machine uses the same crusher as the 20TJ and can be powered by the use of hydraulic powerpacks or the auxiliary hydraulic supply from a tractor, compact loader or similar source. The machine offers outstanding performance in a number of applications for landscapers, small builders and demolition companies as well as waste recycling and the agricultural sector. • 10SJ Stationary Jaw Crusher — This stationary 7 in. x 16 in. jaw crusher utilizes the same crusher as the 10TJ, with instant hydraulic adjustable jaws and dust suppression as a standard feature. The 10SJ may be powered by the use of hydraulic powerpacks or the auxiliary hydraulic supply from a tractor, compact loader or similar source and an

electric version also is available. Designed for small scale crushing projects, the 10SJ is ideal for landscapers, small builders and demolition companies as well as waste recycling and the agricultural sector. • 90TS Tracked Double Deck Screening Plant — This self-contained screening plant is equipped with a receiving hopper, double-deck screen and three stockpiling conveyors. The 90TS is mounted on a remote control tracked chassis and is powered by a three-cylinder Tier IV 25 hp Kubota water cooled diesel engine. With 14 ft. 1 in. long x 6 ft. 2 in. wide travel dimensions and hydraulically folding conveyors, the low weight unit is easy to transport, sets up in minutes and is activated by easy to use single button functionality. For more information, visit smicompact.com. 

The 90TS is mounted on a remote control tracked chassis and is powered by a three-cylinder Tier IV 25 hp Kubota water cooled diesel engine.

Superior Performance Bobcat E26 excavator operators will enjoy added dig depth, reach and dump height with the standard long-arm configuration. In addition, the increased cylinder size provides enhanced breakout forces and lifting ability. The E26 offers the best lift capacity for its size and a narrow width for easy trailer loading and working through doorways, gates, property lines or other tight areas. Operators will enjoy more flexibility to work in tight spaces while experiencing notable improvements in stability and digging performance, according to the manufacturer. The 24.8-hp diesel engine does not require a diesel particulate filter (DPF) or selective catalytic reduction (SCR) to meet Tier IV emission requirements. Increased Durability Operators can see and feel a difference in the durability of the new R-Series E26. The sharp new body panels aren’t just for looks. They’re stiffer and more robust. They fit tighter together and they include stronger hinges and latches. Together, these features reduce vibration in the cab to enhance operator comfort. In addition to cab durability features, the E26 also offers a more robust blade design that allows self-cleaning and requires less time clearing mud and debris after the job is done. Bobcat also redesigned the R-Series E26 with steel hydraulic lines to offer better protection than rubber hoses. They’re routed through the lower portion of the boom swing casting and tucked securely into the top area of the boom structure, preventing costly damage and protecting component life. Hoses have more steel tubing, well-designed mounts and minimal fittings. Each of these enhancements work together to increase uptime protection for E26 excavator operators, according to the manufacturer. Approved Attachments The following Bobcat attachments are approved for use with the new R-Series E26 excavator: • Auger • Clamp • Grading blade • Grading buckets • Hydraulic breaker • Nitrogen breaker • Packer wheel • Three-tine grapple • Trenching buckets Second auxiliary hydraulics can be installed by the local Bobcat dealer to provide additional hydraulic flow for enhanced attachment performance. For more information, visit Bobcat.com. 

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 25, 2019 • Page 89

ASPHALT CARE EQUIPMENT INCORPORATED 2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 www.asphaltcare.com

BARRY EQUIPMENT COMPANY, INC. 30 Birch Island Road Webster, MA 01570 508/949-0005 www.barryequipment.com

CHAPPELL TRACTOR

EQUIPMENT EAST

454 Route 13 South Milford, NH 03055 800/698-2640

61 Silva Lane Dracut, MA 01826 978/454-3320 www.equipmenteast.com

251 Route 125 Brentwood, NH 03833 800/616-5666 391 Loudon Rd. Concord, NH 03301 800/358-6007 www.chappelltractor.com

PITTSFIELD LAWN & TRACTOR 1548 W. Housatonic St. Pittsfield, MA 01201 413/443-2623 www.plt.com

JERSEY RENTS 252 Atlantic City Blvd. Bayville, NJ 08721 732/361-4487 322 Spring Valley Road Old Bridge, NJ 08857 732/591-2088 www.jerseyrents.com

HEAVY MACHINES INC. 159 North Avenue Skowhegan, ME 04976 888/875-3954 2401 Broadway, Building #3 South Portland, ME 04106 877/202-1275 www.heavymachinesinc.com

VERMEER ALL ROADS 8830 Corridor Road Annapolis Junction, MD 20701 800/492-1274 Manassas, VA 800/552-2074 Roanoke, VA 844/837-6337 Charlotte, NC 800-768-3444 Garner, NC 888/883-7633

Colfax, NC 888/933-9344 Simpsonville, SC 800/850-4710 Summerville, SC 800/246-4307 Cranberry Township, PA 888/213-8340 Medina, OH 888/213-3544 Findlay, OH 888/213-8338

www.vermeerallroads.com

Page 90 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Parts, Training Center Is at the Heart of Sennebogen’s Success in Americas

Ambrose Equipment Co. 1401 Hooksett Rd. Hooksett, NH 03106 603-644-8787 1 Madison Street Plainville, MA 02762 508-643-0044 www.ambroseequipment.com

Able Tool & Equipment In Sennebogen’s three-tiered training bay, visiting technicians can get a hands-on introduction to all areas of the towering material handlers from every angle.

410 Burnham Street South Windsor, CT 06074 860-289-2020 www.abletool.net

Small class sizes provide technicians with true hands on learning.

The group of students Shared with Sennebogen’s with many different compamassive parts warehouse ny names on the shirts are all along with sales, engineering gathered close to the green and administrative offices, machine where their instructhe training center is actually tor has opened a side hatch “firewalled” from the buildto demonstrate some key ing’s other operations, so service points. The group attendees aren’t distracted or talks casually with questions interrupted by the outside. It for the instructors, while provides classrooms fully they each share some of their equipped with the latest personal experiences from teaching and e-learning techthe field. nology along with the threeIn most ways, it’s just The 100,000 sq. ft. warehouse and training center in tiered training bay with a pit another training session for Stanley, N.C. big enough for the whole heavy equipment techniclass to safely be under the cians. But, on a second look, a few differences from the norm machine, component room, models and breakout boards for become apparent. hands-on instruction. But Sennebogen’s long-time Service Manager, Jim For one: the shop itself. It’s a clinically pristine workspace Westlake, believes that the most valuable feature of the trainthree floors high, overlooked by a viewing gallery. For another: the machine. Parked here in this bright, cli- ing center is the distance it puts between trainees and their mate-controlled classroom is a 140,000 lb. (65,000 kg) everyday workplace. “It seems to change the expectations of the principals and Sennebogen 850 material handler that stands with its boom the customers who send their people here,“ Westlake said. and stick folded down. Then, there’s the people. As the attendees talk, it emerges “They are being selective in who they send. We see more that only half of the class came here from Sennebogen’s senior technicians now — the ones who are in the best posidealer staff. The others work for Sennebogen customers: tion to pass along what they learn to others in the shop. recycling yards, sawmills, barge ports… all invited by their Everyone sees a big difference. Since we started bringing dealer to receive the same factory training as the technicians technicians into our facility, the type of calls we get from within the family of Sennebogen’s service network. At no their shops have changed — we don’t get questions about issues that were already covered in class. It works for us, and cost. Customers are routinely surprised and delighted by the it works for our customers.” opportunity. As the president of one scrap facility said, It Takes a Mechanic to Teach a Mechanic “OEMs don’t want to show anybody else how to service Roger Hardin, the chief trainer in the school, concurs with their machines. That’s business for the dealer. But it’s a big advantage for us to be able to work on our own machines.” Westlake’s appraisal. “When technicians come here, they are not being pulled away from class to answer other questions and needs in the A “Purpose-Built” Facility for shop. This is no holiday camp, either. We always maintain a Customer Support level of professionalism throughout the time they are with Like the machines that Sennebogen sells, the facility us.” housing the training school has been “purpose-built” to supHardin said he enjoys the program because it gives him port dealers and customers in the United States, Canada, the chance to “give them the kind of training I wanted.” He Mexico and South America. had 41 years of practical experience as a service mechanic Here in Stanley, N.C., the classrooms and instruction bays before joining Sennebogen, including 15 years as a trainer. are part of the 100,000 sq. ft. headquarters opened by see SENNEBOGEN page 92 Sennebogen LLC in 2009, just outside the city of Charlotte.

Admar Construction Equipment & Supplies 1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585-272-9390 7800 Brewerton Road Cicero, NY 13039 315-433-5000 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Road Tonawanda, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031 878 Old Albany Shaker Road Latham, NY 12110 518-690-0750 3001 West 17th Street Erie, PA 16505 814-833-7761 121 Armstrong Road Pittston, PA 18640 570-299-5505 www.admarsupply.com

Equipment East 61 Silva Lane Dracut, MA 01826 978-454-3320 www.equipmenteast.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 91

Cap Rents Supply, LLC 18-25 43rd Street Astoria, NY 11105 718-932-4100 Fax: 718-932-8971 www.caprents.com

Gamka Sales Co., Inc. 983 New Durham Rd. Edison, NJ 08817 732-248-1400 Fax: 732-248-1445 www.gamka.com

Central Equipment Company P.O. Box 261 45 Dempsey-Greaves Lane Stillwater, ME 04489 207-827-6193 Fax: 207-827-3774 54 Old Canal Way Gorham, ME www.centralequipmentco.com

Pump & Power Equipment Corp. 8019 Dorsey Run Rd. Jessup, MD 20794 410-799-1800 Fax: 410-799-1804 www.pumpnpowerequip.com

Diamond Tool 2800 Grays Ferry Avenue Philadelphia, PA 19146 888-879-3426 www.diamondtool.net

Skyview Tractor Repairs, LLC 608 Fairview Road Manheim, PA 17545 717-665-6997 www.skyviewtractor.com

See Us at Booth F2548

Page 92 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

North American Attachments

800-380-8808 www.na-attachments.com sales@naasales.com

SENNEBOGEN from page 90

Excavator Attachments

Compaction Wheels

Ripper Tooth

Ditching Cleaning Bucket Drain Holes Optional

Severe Duty & Rock Excavator Buckets

Dual Action Grapples

Tree Stumpers

Black Splitter

Pin Grap Couplers

Skidsteer Attachments

Grapple Rakes

Grapple Buckets

Skeleton Buckets

Loader/Backhoe Attachments

Fork Carriages & FORKS

Loader Rake w/Grapples

All Sizes... Manual & Hydraulic Thumbs

Purpose-Built N.C. Facility Supports Dealers, Customers

Dozer Rakes

General Purpose Loader Buckets

Quality Construction Attachments

Westlake and Hardin both place a high value on hands-on instruction, and so do the attendees. “It takes a mechanic to teach a mechanic,” Hardin said. “A student from one of our dealers spelled it out: sometimes you go to training where everything is on paper, and you can’t relate it to the real product. Here, you see exactly where to find things on the machine so you’re better prepared to troubleshoot it when you’re in a hurry in the field.” Coast-to-Coast Knowledge Network For dealers and customers alike, saving downtime for service and repairs is critical. Sennebogen customers are often located in the nation’s most remote areas. John Anderson is director of maintenance of ABC Recycling in British Columbia and he knows first-hand how scarce qualified equipment mechanics can be. “If we don’t have the people we need on our own payroll, we can end up waiting a long time for machine service. Having our own team makes a huge difference.” Trevor Reid, responsible for C&C Resources sawmill located hundreds of miles from the nearest city in central Saskatchewan, also appreciates having knowledgeable staff on site. “Our technician came back with rave reviews about the Sennebogen facility, and all it cost us was airfare and a hotel room.” Constantino Lannes, president of Sennebogen LLC, feels that his investment in training and support has been key to the company’s continuing success. “When the Sennebogen family decided to bring their material handlers to the Americas, they knew that support would be absolutely critical to customers here,” he said. “This facility and the concept of transparency along with providing free training not only to our dealers but the end users, represents our commitment to the marketplace. The end result is that the dealers and their customers bond during their training programs and feel a new kinship with them. At the end of the day, it is a win-win-win situation for the three parties.” According to Lannes, the goal of the training center is to cultivate the nation’s largest network of technicians with specialized factory training on material handling equipment. To date, the center has graduated more than 1,000 technicians through its five-day Service Level 1 program. After returning home to put their new knowledge to work,

graduates are eligible for the advanced Service Level 2 course for five additional days of in-depth troubleshooting instruction. Dealer and customer staff also can sign up for additional courses, offered at no cost including operator familiarization and parts training. More Than the Sum of Their Parts For technicians to do their job, of course, they need parts. And just “over the wall” from the Sennebogen Training Center is the largest and most complete inventory of material handler parts in North America. Lannes noted that this warehouse maintains stocks of every component that goes into every Sennebogen machine currently in service. Vast rooms here store rows of complete booms, hydraulic cylinders and cab assemblies, along with stocks of the smallest connectors and seals. The inventory even includes a wide range of ready-to-go diesel engines. “We make sure we have the exact engines available to fit into our units in the field easily. That can offer a great time-saving for customers. In one case recently, one of our distributors was told he would have to wait up to eight weeks to get an engine from its manufacturer. But we had one in stock and shipped out to him the same day,” Lannes said. In another section of the facility, teams are busy assembling cable harnesses and fitting hoses to match original specs for specific machine models. Others are packaging custom sets of parts, materials and even special tools into “uptime kits” that consolidate everything a technician will need to complete a given maintenance task at the factory’s prescribed service interval.

Maximizing Machine Uptime Sennebogen’s parts strategy parallels its approach to training: To ensure that customers have ready access to whatever they need to maximize machine uptime. The investment in parts in the warehouse is reflected in the local inventories maintained by Sennebogen distributors. Sennebogen works closely with its dealers to keep the commonly needed parts for their customers’ machines nearby. “In this industry, our parts inventories are a huge advantage for customers. They appreciate that, in the U.S., we can ship directly to them by truck or even overnight instead of waiting for a ship to cross the ocean.” For more information, visit www.sennebogen-na.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 93

Lorusso Heavy Equipment LLC www.lhequip.com 160 Elm Street, Unit 1 Walpole, MA 02081 508-660-7600

Powerco, Inc. www.powercoinc.com 7247 Penn Drive Allentown, PA 18106 800-360-1128 12 Route 173 Clinton, NJ 08809 800-232-7232

Vantage Equipment LLC www.vanquip.com 5985 Court Street Road 4554 W Saile Drive Syracuse, NY 13206 Batavia, NY 14020 315-437-2611 585-344-1931 17 Northway Lane Latham, NY 12110 518-220-9500

Page 94 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MILTON CAT www.miltoncat.com

THE GEAR G TO CLEAR

Contractor and recycling customers in ME, RI, VT, NH, MA, and state of NY, excluding New York City and surrounding counties.

100 Quarry Drive Milford, MA 01757 508-634-3400

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586

14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200

79 Robertson Blvd. Brewer, ME 04412 207-989-1890

84 Concord Street North Reading, MA 01864 978-276-2400

500 Commerce Drive Clifton Park, NY 12065 518-877-8000

2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350

294 Ainsley Drive Syracuse, NY 13210 315-476-9981

Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500

55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200

WHITNEY & SON, INC. www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, and VT.

MANY MODE ELS, ENDLESS APPLICATIONS ATIONS High volume land cle earing operations know that when it co omes to creating the highest volume products p at th lowest the l t costt per tto on, P Peterson t horizontal grinders and chippers off ffer er bett better fracturing g, more accurate product sizing, and more m throughput than any machine on n the market.

95 Kelley Ave. Fitchburg, MA 01420 800-245-5472 978-343-6353 info@whitneyandson.com

Since 1981, Peterson’s P attention to detail and drive to build the highest quality, y, highest highe est vvolume producing machines hi maake k a Peterson P t a sure investment. Want to t see what w a Peterson can do?

Give us a call at 800.269.6520 8 or visit us at ww ww.petersoncorp.com

New England & New York www.barryequipmennt.com

Blower Trucks

•

Pennsylvania & West Virginia www.clevelandbrothers.coom

Chippers

•

G Grinders

GTGroff MidTractor Atlantic New Jersey Jersey www.grofffftr tractor.com www.gtmidatlantic.com

•

Screens Screens

Maryland, Delaware, NE Virginia, West Virginia www.albancat.com

•

Stacking tacking tack ki Conveyors C

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 95

Page 96 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE HORSES FOR MORE CHORES. Offering dozens of quick-change attachments, Ditch Witch® compact utility equipment performs an amazing number of chores with the kind of power that outperforms the competition. These low-maintenance machines provide the versatility and long-term reliability that rental companies and general contractors demand. Your demand is our ccommand. WE’RE IN THIS TOGETHER.

www.jescodittchwitch.us South Plainfielld, NJ // 118 St Nicholas Ave. T: 908-753-8080 // F: 908-753-7853 Shrewsbur y, MA // 508-71 5 9-0200 Middletown, DE // 30 02-376-0784 Beacon, NY // 845-8 831-1800

Deer Park, NY Y // 844-482-0910 Fairfield, NJ /// 973-227-2221 Lumber ton, NJJ // 800-241-7070

Manfred Construction Leads Gargantuan Greenhouse Job GREENHOUSE from page 18

Manfred Construction. Manfred Construction weren’t really sure what day was founded in 2011. of the week it was.” Before that Charles Manfred The result of all of this had served at D.A. Collins as excavation was a 20-acre in a project manager. In 2011 size and 35-ft. tall pile of he had the opportunity to largely unsuitable materials form a company and work that needed to be moved and on some projects that were buried elsewhere on the site available at Fort Drum. The and be replaced with suitprojects included utility able material. This enorwork, paving and infrastrucmous pile that partially laid ture projects. Over the in the footprint of one of the course of the next few years future greenhouses was his company did $30-40 milplaced into an “L” shaped lion worth of projects at Fort berm 25-ft. high. Manfred Drum. Construction was able to “Getting started was locate a gravel pit on the site and was able to extract grav- The combination of Doosan DA30 30-ton haul trucks with Kobelco excavators make the best of some extraordi- scary. I pulled all of my retirement money, I mortel from this site to reach the narily poor working conditions. gaged my home to the max desired grade in areas where and I convinced two good existing material had to be To accomplish the heavy lifting on this Kobelco SK140 excavator, a Kobelco SK85 superintendents to join me. Getting bonded removed. Two challenges made this particularly dif- project, Manfred Construction has a fleet of excavator, two Hamm 84-inch dirt rollers, a for those original projects was a real chalficult. One, central New York had a very wet equipment that is largely made up of equip- Doosan DL220 loader, a Bobcat T 770 lenge, but I think the bonding company spring and summer and the soil conditions ment it has acquired or rented from Robert tracked loader, and two John Deere 850 doz- sensed something in our company, that we had made the commitment and we had the on the site are predominantly clay, therefore, H. Finke & Son, including six Doosan ers. Charles Manfred’s relationship and loyal- know-how. little drainage. Secondly, even at the end of DA30 articulated haul trucks, two Kobelco “One of the projects at Fort Drum was a the summer the materials within the pile SK500 excavators, a Kobelco SK350 exca- ty to Robert H. Finke & Son and sales rep vator, a Kobelco SK270 excavator, a Don Bauer goes back even before he started were still frozen. see GREENHOUSE page 102

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 97

Jersey Rents 252 Atlantic City Blvd. • Bayville, NJ 08721 732-361-4487 • Fax: 732-606-0640 www.jerseyrents.com

Page 98 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Significant Infrastructure Works Enters Final Phase

A Montano Co., Inc. www.amontanoco.com 571 Route 212 • Saugerties, NY 12477 845.247.0206

Lorusso Heavy Equipment, LLC www.lhequip.com 160 Elm St. • Walpole, MA 02801 508.660.7600

Modern Group Ltd. All Island Equipment www.allislandequipment.com 39 Jersey St. • West Babylon, NY 11704 631.643.2605

New York State Thruway Authority photo

www.moderngroup.com 2501 Durham Rd. • Bristol, PA 19007 800.866.3376 Allentown, PA 18106 610.398.1101 York, PA 17406 800.866.3376

Butler Equipment Construction crews are in the midst of a $135 million infrastructure project that will complete reconstruction of the final mile of a section of the New England Thruway (I-95) that carries traffic from New York City to the Connecticut border. THRUWAY from page 32

“To eliminate the stop sign, we are realigning the on-ramp from Midland Avenue to go under I-287 so that traffic flows smoothly onto I-95 northbound. We are also performing full depth reconstruction to the roadway to create a more comfortable road surface. Over the years, as a result of high volume passenger and commercial traffic and freeze/thaw cycles, the riding and substructure were in poor condition.” Replacement of the second half of the Grace Church Street Bridge is ongoing, with demolition in progress. Installation of the noise wall located on I-95 southbound from the Byram River Bridge to the Grace Church Street Bridge continues, while retaining walls are being constructed along I-95 southbound from the exit 21 ramp to I-287 westbound, and from I-95 northbound adjacent to I-287 eastbound. Rock remediation continues at various locations along the project site, with 90 percent of remediation complete. Installation of storm drainage systems at various locations is being performed, along with construction of the new I-287 bridge to northbound I-95. There are various elements involved in the reconstruction of the I-95 mainline. Workers are widening the mainline where the Grace Church Street Bridge is located. A new storm drainage system will be installed, as well as new cast in place and precast roadway slabs. Crews are also lowering the I-95 northbound profile up to 3 ft. Tasks required for the replacement of the Grace Church Street Bridge over I-95 and the I-287 eastbound to I-95 northbound ramp bridge includes earth work, the demolition of the existing structure, the construction of new concrete footings and stem walls, structural steel erection and concrete

deck placement, parapet installation and utility relocation. Work involved in the rehabilitation of the Boston Post Road bridge, the Purchase Street bridge, the Blind Brook culvert bridge and the Byram River Bridge includes removing delaminated concrete, placing new concrete, bearing and joint replacement and parapet wall repairs. The Grace Church Street Bridge over I-95 and the I-287 eastbound to I-95 northbound ramp bridge are anticipated to be complete by spring 2020. Repairs on the other four bridges should be finished by the end of summer 2021. Equipment being used during construction includes Kobelco, Liebherr LR 1200, Grove RT 600E and Manitowoc cranes, as well as Caterpillar 320, 324, 336, 365 and Volvo 235, 240, 360, 460 excavators, Caterpillar dozers, Caterpillar 966 loaders, Comacchio MC 28 and Bauer BG15 drill rigs, JLG 800S manlifts and Mack and Volvo trucks. Some of the main materials required for this project include pre-cast and cast in place concrete, steel and asphalt. Approximately 120,000 cu. yds. of material will be removed on the project, including 80,000 yds. of soil and 40,000 yds. of rock. One of the most time-consuming aspects is working with the existing rocky terrain in the area. “This impacts the drilling for noise/retaining wall footings, and involves blasting for new bridge foundations and storm drainage installation, and the widening and realignment of the I-95 corridor,” said Terrizzi. He added, “This is an important transportation infrastructure project that will significantly improve travel in the area. We appreciate the community’s patience and support as work progresses on this project.”  CEG

www.butlerequip.com 631 New Park Avenue • West Hartford, CT 06110 860.233.5439

Edison, NJ 08837 800.866.3376 Hasbrouck Heights, NJ 07604 201.288.1441

Quality Fleet Service, Inc. Chappell Tractor www.chappelltractor.com 454 Route 13 South • Milford, NH 03055 603.673.2640

www.qualityfleetservice.com 548 New Ludlow Road • South Hadley, MA 01075 413.213.0632

251 Route 125 • Brentwood, NH 03833 800.616.5666 391 Loudon Road • Concord, NH 03301 800.358.6007

Seaview Equipment LLC Correlli Incorporated

www.seaviewequipment.com 640 Crescent Ave. Bridgeport, CT 06608 203.330.0130

www.correlli.net 8031 Norris Lane • Dundalk, MD 21222 443.503.5641

TB Equipment & Rental www.tbequipment.net 892 Odlin Rd. • Bangor, ME 04401 207.262.0014

George & Swede Sales & Service www.georgeandswede.com 7155 Big Tree Rd. Pavilion (Buffalo/Rochester), NY 14525 585.584.3425

Tracey Road Equipment, Inc. www.traceyroad.com 6803 Manlius Center Rd. • East Syracuse, NY 13057 315.437.1471 • 800.872.2390

Highway Equipment Company www.highway-equipment.com 22035 Perry Highway • Zelienople (Pittsburgh), PA 724.452.7800 Dubois, PA 15801 814.371.3600 Millstone Township, NJ 08535 732.446.7600

Adams Center, NY 315.788.0200 • 888.335.0200 Albany, NY 518.438.1100 • 866.740.8853 Kirkwood, NY 607.775.5010 • 800.370.9488 Queensbury, NY 518.793.9688 • 800.872.2390

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 99

The Standard for Safety wheel loaders are very “Hyundai safe machines. Good mirror placement for visibility. The backup camera is a great feature. Getting in and out of the cab is very safe – the door, the steps, the handles all contribute to a safe design for the operator. And once you’re in the cab, it’s very comfortable, no matter what size you are.

“

Toby Vanderpool – President/Owner Vanderpool Construction

More standard features. More value.

Page 100 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 101

A. Montano Co. Inc.

Tracey Road Equipment

Highway Equipment Company

Chadwick-BaRoss

Thompson Equipment

www.amontanoco.com

www.traceyroad.com

www.highway-equipment.com

www.chadwick-baross.com

www.thompsonaggregate.com

22035 Perry Highway Zelienople (Pittsburgh), PA 16063 724-452-7800 McKean (Erie Area), PA 814-476-7755 Dubois, PA 814-371-3600 615 State Route 33 • Millstone Township, NJ 08535 732-446-7600 1405 Timken Place SW • Canton, OH 44706 330-915-8391

15 Katrina Road Chelmsford, MA 01824 978-256-9571 800-804-0775

51 North Lisbon Road Lewiston, ME 04241 800-533-8058

571 Route 212 Saugerties, NY 12477 845-247-0206

6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 • 800-872-2390 Kirkwood, NY 607-775-5010 • 800-370-9488 Adams Center, NY 315-788-0200 • 888-335-0200

Henrietta, NY 585-334-5120 • 866-950-6210 Albany, NY 518-438-1100 • 866-740-8853

31 James P. Murphy Ind Hwy West Warwick, RI 02893 401-640-9303

Page 102 • December 25, 2019 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

IN NEED D OF REPLACEMENT ACEMENT RUBBER TRACKS?

GO WITH AMERICA’S ’ MOST TRUSTED BRAND, RUBBER TRACKS R YO OUR UR S SOURCE OURCE FFOR: OR:

8000-365-7260

- Morooka OEM Parts - Yanmar OEM Parts - Replacement p Undercarriage g

WW WW.DEPPPAR ARTS.COM

Robert H. Finke & Son Lends Iron Assist on Oneida Project

At various points in the project berms are created to get rid of unsuitable excess material. GREENHOUSE from page 96

development for 188 homes on the base where we did virtually everything, including roads, infrastructure, gas lines, the works. Of course, just getting started we did not have a lot of cash or an extensive line of credit. But Don Bauer and Finke Equipment

knew my reputation from my previous employer and were ready to work with us when nobody else would take a chance. “We have grown significantly since that time. We have about twenty employees and typically run two crews. We make it a point to remember where we started and who was there with us from the beginning, and that

To meet challenging deadlines two crews working seven days a week, twelve hours a day into the night was required.

was certainly Don Bauer and Finke Equipment. The size and scope of their rental fleet is impressive. It compares favorably to any of the national rental chains. The difference is they put a value on our relationship. Over the years the Kobelco product has been extraordinary. “We consider Kobelco to be a premium

excavator. It is fast and it is reliable. We never see downtime unless it is self-inflicted. On this site the Doosan haul trucks have been very impressive. This material is very wet and therefore very heavy. We are running these trucks all day long well over their rated capacity and we have not had a bit of trouble.”  CEG

2019 W [

Pages 103-106

Snow and Ice section

For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Part 2 Snow Removal Attachments

buyers’ guide

By Eric Olson

CEG CORRESPONDENT

ITH THE

2019-20

WINTER SEASON ALREADY AT FULL THROTTLE,

Construction Equipment Guide offers the second part of its Snow Removal Attachments Buyers’ Guide. In it, CEG gives you tips for locating the best winter tools for use with skid steers, wheel loaders and other light-duty machines so that you may successfully tackle any amount of snow and ice that slams your area. This article will take a close look at commercial-use snow blowers; light-duty angle snow brooms; and buckets and baskets built to assist skid steers and wheel loaders to lift and move snow out of the way. In addition, a sampling of manufacturers of these attachments also is included.

Decision Time Is Here After already working hard in your snow removal operation in the wake of late 2019’s heavy winter weather, you may now have discovered the need for an additional attachment or are simply looking to augment your business’s current stock of snow equipment. If so, you probably also have a good relationship with the dealer from whom you purchased this equipment. Along with talking to a dealer, read all you can about these pieces online and seek out other contractors for their opinions on these tools. Having a set of questions and a wish list of possible winter attachments when you come into the dealership will better target the products you end up buying. Another key element to have in mind in deciding which piece of equipment or attachment to acquire is figuring out how much snow and ice you are likely to have to move and where you will need to move it.

]

Buckets Eliminate Backbreaking Labor For instance, snow buckets are used on small jobs and fit perfectly onto skid steers, wheel loaders and trucks. Because of the relatively small size of the skid steer and its bucket, that combination works well in limited areas, although they can dig and load a lot of snow to move to nearby open land or into the back of a truck for removal. Your snowplow may give you capacity and efficiency, but you’ll only get snow lifting ability with a bucket on a small loader. A similar attachment is the snow basket, which is shaped like a bucket, but possesses open slots on all four sides to allow melt water and air to leak out, giving the operator more room for packed snow and ice.

Hurling Snow Into Piles Some blower attachments, on the other hand, can toss snow up to 45 ft. away from a paved surface. Skid steers and compact loaders equipped with blowers work extremely well in parts of the country used to heavy snowfalls. In addition, snow blowers are designed to remove snow from a surface’s edges. In doing so, a blower makes the edges clean and square, something a snowplow cannot do very well. Single-stage blowers use one auger to move snow into them and back out their chute. In heavier snow belt areas, twostage blowers are more commonly used as they have a larger motor and two augers — one to pull in the snow and another to propel it through the vertical chute.

Brooms Carefully Remove Snow Unlike blowers, angle broom attachments work more carefully to brush away thin accumulations of snow from streets, parking lots, driveways, paths and sidewalks. They can easily be fitted onto any type of compact loader to brush, rather than scrape, and often trail a snowplow to do a more detailed clearing. Because of their design, angle brooms don’t compress snow; instead creating a high friction surface in their wake that gives cars and trucks better road traction. SEE GUIDE PAGE 106

Page 104 • December 25, 2019 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

LESLIE EQUIPMENT COMPANY

W.I.CLARK

www.lec1.com

www.wiclark.com

6248 Webster Road Cowen, WV 26206 304/226-3299 136 Clifftop Drive Beaver, WV 25813 304/255-1525 Rt. 33 West Norton, WV 26285 304/636-6421 19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818

2098 Lillian Lane Pleasant Valley (Fairmont), WV 26554 304/534-5454

30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781

8331 Meade Springer Rd. Ashland, KY 41101 606/928-3477

Danbury, CT 203/775-1203

195 Industrial Park Drive Pikeville, KY 41501 606/432-0321 105 Tennis Center Drive Marietta, OH 45750 740/373-5255

Plainfield, CT 860/546-4808

FIVE STAR EQUIPMENT, INC.

JESCO, Inc. www.jesco.us

www.fivestarequipment.com

1300 East Dunham Dr. Dunmore, PA 18512 570/346-1701

60 Paul Rd. Rochester, NY 14624 585/235-3011

46 Route 97 Waterford, PA 16441 841/796-2663

1653 NY Route 11 Kirkwood, NY 13795 607/775-2006

2585 Lycoming Creek Rd. Williamsport, PA 17701 570/494-4030

284 Ellicott Rd. Orchard Park, NY 14127 716/662-2191 6500 E. Taft Rd. Syracuse, NY 13057 315/452-4560

118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080

1525 Tilco Dr. Frederick, MD 21703 301/874-5500

1790 Route 38 Lumberton, NJ 08048 609/267-2020

8200 Cryden Way District Heights, MD 20747 301-909-7799

1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221

48 Industrial Dr. Waldorf, MD 20602 301-861-2323

1001 Industrial Dr. Middletown, DE 19709 302/376-0784

497 Fishkill Avenue Beacon, NY 12508 845/831-1800

8411 Pulaski Hwy. Baltimore, MD 21237 410/687-1700

110 East Jefryn Blvd. Deer Park, NY 11729 844/482-0910

9060 Ocean Hwy. Delmar, MD 21875 410/546-1090

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 25, 2019 • Page 105

Tri Tank Corp www.tritank.com 115 Farrell Road Syracuse, NY 13209 315-451-8663 Press 5 for Sales

Confer Supply LLC www.rbrsnow.com 434 Old Suffolk Avenue Islandia, NY 11749 631-234-4858 Fax: 631-234-4654

Southside Trailer Service Inc. www.southsidetrailer.com 310 Lake Ave. Buffalo, NY 14219 716-828-1555 250 Two Mile Creek Rd. Tonawanda, NY 14150 716-874-3381 7192 S.Lake Rd. (Rt19) Rochester, NY 14416 585-494-2750 8405 Wattsburg Rd. Erie, PA 16509 814-825-9100

The Plow Shop @ Lafayette Welding, Inc. www.theplowshop.com 64 W Ridge Pike Limerick, PA 19468 610-489-3529 Fax: 610-489-8563

387 612: ,1 ,76 3/$&( www.hiniker.com

Sykes Industrial Services, LLC www.sykesindustrial.net 1002 W. 6th Street Chester, PA 19013 610-389-2113 Mobile: 610-587-8494 Fax: 610-874-1415

Page 106 • December 25, 2019 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Snow Removal Attachments Part 2 buyers’ guide GUIDE FROM PAGE 103

Angle Broom Manufacturers Conterra Attachments — This Canadian maker of topshelf construction attachments, located in Strathmore, Alberta, has a pair of power angle brooms that easily hook up to skid steers and compact loaders for heavyduty snow removal. With 68- and 84-in. broom widths, the two models use hydraulics to adjust and move the attachment 25 degrees in each direction. Conterra’s Power Angle Brooms have a torsion suspension that keeps a consistent, correct bristle position and downpressure in uneven areas while reducing excessive bristle wear. The attachment’s broom wafers are made with a poly steel blend for longer bristle life.

Caterpillar — Five different angle broom models make up Cat’s impressive line of snow and ice attachments. These precision attachments are engineered for wheel loaders, skid steers, multi-terrain loaders and compact track loaders. Customers can choose between hydraulic and manual angling models with sweeping widths from 83 to 118 in. Cat’s brooms are built to sweep straight or rotate 30 degrees to the left or right. Polypropylene and wire are combined to create bristles with tremendous durability and extend the broom life.

Snow Bucket/Basket Manufacturers HLA Snow — Headquartered in Ontario, HLA Snow produces nine skid steer bucket models, with inside widths ranging from 60 to 120 in. These attachments are noted for being able to pick up and move a great deal of snow per pass. The largest bucket — at 120 in. wide — has a heaped snow and ice capacity of almost 60 cu. ft. HLA also makes nine snow baskets — lightweight and large capacity buckets with slotted designs. HLA’s snow buckets and snow baskets have heavy-duty grating along their top edge to give operators maximum visibility. Pro-Tech — This Rochester, N.Y., company is a very popular manufacturer of multiuse snow and ice removal equipment. Included in its showrooms is the custommade Sno Basket, a lightweight, slotted bucket that allows for easy loading and hauling of snow. Its flat-bottomed design allows for maximum collection of snow from piles, while also offering more than twice the capacity of most backhoe and compact wheel loader buckets. The Sno Basket comes with a durable, replaceable steel cutting edge that greatly reduces the amount of wear to the attachment. Pro-Tech crafts its snow baskets in custom sizes, generally from 8- to 12-ft.

Snow Blower Manufacturers Case — Case Construction has a full line of rugged snow removal equipment that can power through any project and easily maneuver into hard-to-reach places that trucks and plows can’t touch. Perfect illustrations of those abilities can be found in Case’s 13 different snow blowers for skid steers and compact loaders. Standard flow, high-flow and enhanced high-flow models are available to match the needs of any contractor. The two-stage

hydraulic blowers blast snow up to 45 ft. through the electronically controlled, poly-lined chute. Direct drive motors on the attachments eliminate moving parts and wear. Case’s snow blowers also possess a range of auger widths with 60-, 72-, 84-, and 96-in. sizes. MultiOne America — If you are looking for a smaller unit, possibly for use in property maintenance, MultiOne America in Springfield, Mo., manufactures six blower models that efficiently hurl large amounts of snow to the spot you want it. Also, when snow needs to be spread out evenly, these two-stage blowers are ideal, even if the snow is wet and heavy. Their powerful augers break up the snow before the fan throws it through the discharge chute. In addition, the chute can be rotated 200 degrees from the operator’s seat, with the discharge chute height angle manually adjusted. MultiOne America’s snow blowers are made with heavy duty frames and transmissions, along with replaceable cutting edges.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 107

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $130 • Color $190

Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

25-26 AP

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J.

BUCKETSBOX: GRAVEL, BEDDING BOXES DUMP HOPPERS SKID STEER ATTACHMENTS

EXCAVATOR, MINI EXCAVATOR & BACKHOE BUCKETS ALL FULLY DRESSED W/ PINS & SIDE CUTTERS

Joseph Fazzio Inc.com • 856-881-3185

25-26 TM

PLATES: STEEL PLATES 96” X 240” & LARGER ALL THICKNESSES - PREMIUM GRADE A570-50 ALSO - LARGE STEEL ANGLES

JFISTEEL.COM • 856-881-3185

25-26 TM

Ransome Shark Tooth Stump Splitter Model RST150, Saw, Split & Remove Stumps in the Ground. Built to fit Most 15-25 Ton Excavators Call 888-280-1710

1999 Smithco, 36 Ft. Tub, New Paint, Brakes, Wet Kit Pump, Tank, Hoses, Cab Controls, More Photos 26-1 BB 26-1 AP Call Mike 319-470-8388

Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 25-26 TM

JFI@JFazzio.com Joseph Fazzio Inc • 856-881-3185 25-26 TM

Would you like your company featured in Construction Equipment Guide? If so, please contact us:

470 Maryland Drive Fort Washington, PA 19034

editorial@cegltd.com

2013 Terex PT30, 54 Hours, Great Condition.................... ....................................................Reduced Price $24,950 25-26 EB Call Tania 614-443-9751 x237

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 866-294-6103 25-26 EB

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $130 per ad, $60 additional for color. Additional $25 to place online • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at 800/523-2200

Page 108 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS EXCAVATORS

MATERIAL HANDLERS

Wheeled Excavators

Material Handlers

2015 Wacker Neuson EW100, Good condition, Wain-Roy attachment, 1,000 hrs .............. ................................$117,000.

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

Subscribe to CEG today...

Get an edge on your competition!

Material Handler, Good condi-

Construction Equipment Guide Northeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

tion, 2,832 hours ......$584,700.

Gibson Machinery 440-439-4000

FORKLIFTS TRAILERS Rough Terrain Forklifts Trailers - Misc. 1979 Fruehauf Tank Trailer, 9,200 Gallon Manifold, Pumpoff line, Tires over 50%, Must sell! ............................$14,000.

Please call for more info and photos 610-578-0837

Tri Tank Corp.

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

$40

ONLY

Construction Equipment Guide is THE Place to List It!

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $25 we can post your ad on our website in our online searchable database.

Call 800-523-2200

To view our Business Calendar online, go to www.constructionequipmentguide.com. DECEMBER CRANE SAFETY COURSES NEW LOCATIONS! REGISTER TODAY! December 23, 2019 Qualified Rigger Level 1, Pasadena, TX December 26 – 27, 2019 Overhead Crane Operator Training, Orlando, FL December 26 – 27, 2019 Qualified Signal Person, Pasadena, TX To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com ROADTEC, INC. Leading the Industry in Road Building and Asphalt Paving Equipment At Roadtec we provide you with the tools that help you maximize paving efficiencies and profits. Roadtec is dedicated to your success in everything we do. It’s who we are. We want to do everything we can to help you, our industry, and our country succeed. That is why we are American made. It is why we offer unrivaled service and training, and why we design equipment that is innovative, reliable, and rugged because that is what you need. Expert Training Services Roadtec feels that one of the most important and rewarding services we can provide our customers is training. Whether it is service and maintenance training or operations and best practices training, our expert service and application personnel can fill that need. Mark Your Calendars for PPW! The 2020 Paving Professionals Workshops (PPS) will be held on the following dates: January 6 – 7, 2020 January 8 – 9, 2020 January 13 – 14, 2020 January 15 – 16, 2020 PPW is the asphalt industry’s most comprehensive training. The handson training is held at our state-of-the-art training facility in Chattanooga and covers all aspects of paving, from preparing a surface to achieving optimal smoothness. For all classes, attendees receive personalized and detailed education from the industry’s most skilled and experienced paving professionals. For more information on the PPW Workshops, contact: ROADTEC, Inc., 800 Manufacturers Road, P. O. Box 180515, Chattanooga, TN 37405. TOLL FREE: 1.800.272.7100. PHONE: 423.265.0600. FAX: 423.267.7104.

SUBSCRIPTIONS:

or go online to place your ad

(within United States & Puerto Rico Only)

One Year $65

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________

Check Enclosed

You must have a classified print ad to do so.

VISA

MASTERCARD

American Express

CARD NUMBER

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

315-558-1398

Business Calendar

NORTHERN GREEN EXPO 2020 Dates: January 14 – 16, 2020 Place: Minneapolis Convention Center Minneapolis, Minnesota

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

‘14 Sennebogen 835M-E,

Able Tool & Equipment 860-289-2020

For Sale High Lift Lull 644 RT Forklift 5200 hours, 42 foot reach, good working condition $18,500

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $25 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

“International Trade Exhibition for Agriculture Industry in Minneapolis.” This event focuses on pesticide recertification, low voltage landscape lighting design and technology, urban turfgrass: benefits, management, environmental issues, and much more. Registration is Open! Registration for the largest green industry event in the northern region is now open! Don’t miss your chance to learn from green industry experts in every field and make the connections you need to help build your business or career. Book Hotel Rooms Now! A variety of hotel rooms have been secured at reduced rates for Northern Green 2020 at the Hilton Minneapolis, Millennium Hotel, Hyatt Regency Hotel, and the Holiday Inn Express & Suites. There are a limited number of rooms at the reduced rate so make your reservations today! Vendors That Understand You! Find out who will be exhibiting at Northern Green 2020 and what products and services they offer – search the Vendor Directory! Education to Meet Your Needs! You will find fun and learning around every corner, both on the trade show floor and in the classroom. For more information on Northern Green Expo 2020 contact: Northern Green, 1813 Lexington Avenue N, Roseville, MN 55113. Phone: 651/633-4987. Email: info@northerngreen.org. Website: www.NorthernGreen.org ASSOCIATED GENERAL CONTRACTORS (AGC) AGC Construction Safety & Health Conference DATES: Wednesday, January 15, 2020 to Friday, January 17, 2020 Location: Austin, Texas Safety and Health For more information on this Program, contact AGC, 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: info@agc.org CONSTRUCTION CPM CONFERENCE DATE: January 19 – 22, 2020 PLACE: Disney World Florida at the B Resort & Spa All About the Conference on CPM Three Full Days of Study and Training in CPM the Critical Path Method of Planning & Scheduling Analysis. Study and discuss the theory and practice of CPM. Explore and train on a variety of CPM software products. Go home with “how to use” skills on three or more software solutions. Expand your skill sets with sessions on estimating, cost and risk. Consider how BIM, lean and green demands will impact your practice. Discuss your needs at vendor specific users’ forums. Join the jury at the Mock Trial. Network with other construction professionals, that’s right! Construction Professionals! Located at the B Resort at Disney World Florida Our Continuing Mission To explore leading edge CPM scheduling concepts To Seek out new expert schedulers and software solutions To boldly go where no scheduling conference has gone before Contact Information: CPM Construction Scheduling/Construction Experts. Phone Number: 844/877-3247. ASSOCIATED GENERAL CONTRACTORS (AGC) AGC’s Project Manager Development Program 2nd Edition DATES: Monday, January 20, 2020 to Friday, January 24, 2020 TIMES: Monday, January 20, 2020 – 8:00 AM Friday, January 24, 2020 – 5:00 PM Location: San Antonio, Texas

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

STraining/Professional Development For more information on this Program, contact AGC, 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: info@agc.org THE NAHB INTERNATIONAL BUILDERS’ SHOW Dates: January 21 – 23, 2020 Place: Las Vegas, Nevada The NAHB International Builders’ Show (IBS) is the home building industry’s premier event. Only at IBS can you connect with thousands of your home building peers, industry experts and manufacturers to exchange ideas, discuss challenges and access real business solutions. Don’t miss your chance to get cuttingedge, first-hand information on hot topics, trends and technology, discover new products and find effective ways to enhance and optimize your business. Top reasons you should be at the Builders’ Show! . Incredible Value – Business Benefit . Education – 150+ Education Sessions . Exhibits – 1,400+ Exhibitors . Construction Demos – High Performance Building Zone & Jobsite Safety Zone . IBS Live – The Future of Home Building . IBS Centrals – Niche-Focused Programming . Show Homes – Complimentary Tours . Connections – 67,000+ Attendees . Special Events – Awesome Fun! . Fantastic Location – Vegas, Baby! All work and no play…not at IBS! Much to see and do after the show in fabulous Las Vegas – the city that never sleeps! BONUS Reason! Design & Construction Week. Your IBS registration includes access to the exhibits of the Kitchen & Bath Industry Show (KBIS) as part of Design & Construction Week. For more information on this show, please contact: NAHB International Builders at 202/2668690. Design & Construction Week Design & Construction Week (DCW) features the co-location of the National Kitchen & Bath Association’s Kitchen & Bath Industry Show (KBIS) and the NAHB International Builder’s Show (IBS). The 7th Annual Design & Construction Week (DCW) will be held January 21 - 23, 2020 at the Las Vegas Convention Center and attended by more than 90,000+ residential design and construction professionals who came together to the network, discover new products and take advantage of numerous learning opportunities. Thanks to our 2020 Supporting Organizations! . American Institute of Building Design . Cabinet Makers Association . Custom Electronic Design & Installation Association . International Code Council . Kitchen Cabinet Manufacturers Association . National Lumber & Building Material Dealers Association . National Tile Contractors Association . Natural Stone Institute . Plumbing Heating Cooling Contractors National Association . Structural Insulated Panel Association . Window & Door Dealers Alliance Contact Us! Domestic: 800/465-5514, International: 847/996-5814, kbis@experient-inc.com ASSOCIATED GENERAL CONTRACTORS (AGC) AGC’s 2020 Conference on Surety Bonding and Construction Risk Management DATES: Monday, January 27, 2020 to

Wednesday, January 29, 2020 Location: Bonita Springs, Florida For more information on this Program, contact AGC, 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: info@agc.org CONEXPO-CON/AGG 2020 North America’s Largest Construction Trade Show With tens of thousands of visitors, a successful exhibition at CONEXPOCON/AGG 2020 can change your business. We will help you make the most of all your opportunities. DATES: Tuesday, MARCH 10 to Saturday, MARCH 14, 2020 Show Hours: Tuesday, March 10th thru Friday, March 13th 9:00 AM to 5:00 PM Saturday, March 14th 9:00 AM to 3:00 PM PLACE: LAS VEGAS, NEVADA About the Construction Trade Show: This show is massive and a must attend! It has all the latest equipment and the cutting-edge technologies we need to make us even more efficient. CONEXPO-CON/AGG is North America’s largest construction trade show representing asphalt, aggregates, concrete, earthmoving, lifting, mining, utilities and more. . 2,800 exhibitors . 2,500,000 square feet . 150 education sessions Decrease downtime and increase efficiencies with new products and technologies from 2,800 exhibitors. Who is Exhibiting in 2020 by Product Category? • Aggregates Processing • Asphalt Production & Paving • Business Solutions • Concrete Construction & Manufacturing • Earthmoving Equipment & Material Handling • Engines, Components & Electronics • Hauling Equipment • Infrastructure Support • Land Clearing • Lifting (Aerial & Cranes) • Pumps • Rail Equipment • Safety & Traffic • Trucking • Underground Construction • And more! Who Attends? CONEXPO-CON/AGG brings contractors, dealers, distributors, service providers, engineers and producers together. No other show connects attendees from every major construction sector. Browse New Products See the latest, most innovative construction equipment and products, conveniently in one place online, so you can find the right solution for your next job. Get Expert Advice Discuss equipment before the show (without the sales pitch!). Easily go direct to leading equipment manufacturers, with any question, so you can narrow down the right machine for your next job. Build Your Network We bring the entire industry together. Tap into a network of experts, from successful construction owners, to experienced equipment operators, and key contacts at manufacturers. For more information, CONTACT US! Monday to Friday 8:00 AM to 4:00 PM Central Time (U.S.) U.S. & Canada: Toll Free: 800/867-6060 International: +1 414-274-0644 China: +86 10 8519-1566

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 109

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (USA): TAKEUCHI TB0-35S AND 135S WITH CABS. RUNNING OR FOR PARTS. PLEASE CALL 443-3925789. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR COMPACT TRACK LOADERS, USED CATERPILLAR SKID STEER LOADERS 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XE. EMAIL: LSGLOBAL@NVER.COM –––––––––––––––––––––––––––––––– WANTED (USA): A GOOD USED C-12 CAT ENGINE FOR A SHORT NOSE 2000 PETERBILT 379 ROAD TRACTOR. ENGINE TO HAVE CORRECT ECM AND S# BEGINS WITH 2KS , 380 MIN. HP. CONTACT JIM ARNETT JARNETTJR@ORBITSDO.COM; C# 937603-3965. –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR D11 CRAWLER DOZERS - INTERESTED IN PARTS FOR LARGE DOZERS FOR COAL MINES AND AGGREGATE QUARRIES. EMAIL: BIGIRONLUNS87@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATORS. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (USA): CAT 315,320,325,330,336 DL SERIES EXCAVATORS UNDER 8000 HOURS AND WHOLESALE PRICED MACHINES. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: TAKEUCHI MINI EXCAVATORS TBO-35’S WITH CABS, RUNNING MACHINES AND/OR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (NY): LOOKING FOR USED 5 TON WIRE ROPE HOIST TO RUN ON A PATENT TRACK EMAIL: INFO@ BRIDGEHAMPTONSTEEL.COM PHONE: 631-537-2486 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330C L EXCAVATOR - LOOKING TO BUY CATERPILLAR 330CL & 330DL IN GOOD RUNNING CONDITION. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS TRENCOR TRENCHING / BORING / CABLE PLOWS. EMAIL:ADMIN@MITCHELLHOPPER.COM PHONE: 432-888-2593 –––––––––––––––––––––––––––––––– WANTED (FL): BOBCAT MT50 COMPACT TRACK LOADERS EMAIL: EIDNKSLJK@ICLOUD.COM PHONE: 6039 2I28 939 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING TO BUY ANY CAT LOADER AT WHOLESALE PRICE. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1587 ––––––––––––––––––––––––––––––––

WANTED (TX): ALL MODELS CATERPILLAR MOTOR GRADERS. EMAIL: MAGDIELLERMA@GMAIL.COM PHONE: 956-432-7379 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR WHEEL LOADERS. CAT 966H OR K WITH UNDER 10,000 HOURS, BUCKET, COUPLER. SET OF FORKS IS A PLUS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (WV): ALL MODELS TERRAMITE BACKHOE LOADERS - CHECKING PRICES FOR TERRAMITE T7 FRON RIM FOR SERIAL NUMBER 227X0102. EMAIL: EDWINANDDIANA@FRONTIER.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOBELCO K907D EXCAVATORS - MAIN HYDRAULIC CONTROL VALVE (907D) SERIAL #LN7001 TO YG0501. KOBELCO PART # 2436U1165F2, KAWASAKI TAG # KMX15A/23009 ALSO USED ON YUTANI 1986, MODEL 195. EMAIL: PTSCOTT@HTVA.NET –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU ATTACHMENTS - SKELETON BUCKET FOR KOMATSU 220 EXCAVATOR 54" TO 60". CAN ADAPT FROM OTHER MACHINES AS LONG AS ITS 80 MM PINS. EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): HYDRA-MAC 1700 SKID STEER LOADER. EMAIL: MALONEYFARM.1@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– WANTED (FL): CASE CRAWLER DOZERS, ALL MODELS. EMAIL: JABOWEND@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: PAUL@HEAVYSURPLUS.COM; PHONE: 214-625-2652 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D5B OR D6C CRAWLER DOZER. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 970F WHEEL LOADER. EMAIL: SALES3@GCESEQUIPMENT.COM; PHONE: 657-347-6605 –––––––––––––––––––––––––––––––– WANTED (GA): KOBELCO EXCAVATORS, ALL MODELS. MINI- OR MIDIEXCAVATOR. USED. UNDER 2000HRS. CA 35 T0 40 HP FULLY FUNCTIONAL. THUMB EMAIL: JKSAPP@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (US): LIMA CRANE – ANY LIMA 2400B MACHINES IN ANY TYPE OF CONDITION. EMAIL: REBUILD@TUSCO.NET ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR D8T CRAWLER DOZER. LOOKING FOR MACHINE WITH ISSUES AND/OR HIGHER HOURS, AT A WHOLESALE PRICE. BUYER WANTS MACHINE CHEAPER THAT HE CAN PUT THROUGH HIS SHOP AND REFURBISH AS NEEDED. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (US): YANMAR YFW55R DUMPERS - FINAL DRIVE OR A PARTS MACHINE. EMAIL: ORDERS@LEWEQUIP.COM; PHONE: 724-887-9375 –––––––––––––––––––––––––––––––– WANTED (US): GEHL DL-10H-55 TELEHANDLERS / FORKLIFTS - SN # 10H55JR024028 NEED PART # L71553. EMAIL: JEFF.JAEGER@HOTMAIL.COM; PHONE: 345-925-9709 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT S175 SKID STEER LOADERS; ANY STATE NEAR ARKANSAS WOULD BE HELPFUL. EMAIL: BRIANFITZJURLS@GMAIL.COM; PHONE: 479-847-4202 –––––––––––––––––––––––––––––––– WANTED: LINK-BELT LS-348H CRANE – LOOKING FOR THE BOOM WIRE WRAP FOR A LINK-BELT 348 HYLAB , S/N L9J89965. EMAIL: POWERALEXHEAVY EQUIPMENT@GMAIL.COM PHONE: 386-496-1340 –––––––––––––––––––––––––––––––– WANTED (NH): DYNAHOE 160 BACKHOE LOADERS - I'M LOOKING TO FIND ANY AND ALL INFORMATION ABOUT THIS MACHINE, FORUMS, TROUBLESHOOTING ETC. I HAVE ONE THAT RUNS BUT CAN'T GET IT TO MOVE... HELP PLEASE!! EMAIL: RUSSELLMORRIS66@AOL.COM –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS KOLBERG ASPHALT / CONCRETE / PAVING LOCATED IN TAMPA, FL. LOOKING FOR PARTS FOR A VIBRATING SCREEN. KOLBERG SCREEN. SR # VS514DD1113-91. EMAIL: TODD.BUSH@ PREFERREDMATERIALS.COM PHONE: 407-948-6796 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS UPRIGHT WHEEL LOADERS - LOOKING FOR MANUALS AND SPARE PARTS FOR FURUKAWA WHEEL LOADERS, ANY ASSISTANCE WOULD BE GREATLY APPRECIATED. EMAIL: DOUG.KLITSCHER@LIVE.COM.AU; PHONE: +61401627855 –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU PC400LC-7L EXCAVATOR - HYDRAULIC QUICK COUPLER FOR A 05 PC 400 L7 HD. 100MM PINS. EMAIL: DGMEINER62@GMAIL.COM; PHONE: 315 767-4111 ––––––––––––––––––––––––––––––––

WANTED (US): ALL MODELS JOHN DEERE BACKHOE LOADERS T09310G056237 JOHN DEERE 555G TRACK LOADER WITH BACKHOE, NEED SWING FRAME OR WILL BUY THE WHOLE DETACHABLE BACKHOE IN GOOD CONDITION. EMAIL: JRBUSTA@HOTMAIL.COM; PHONE: 417-668-5978 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR D9L CRAWLER DOZER - CAT D9-L ENGINE COMPLETE IN GOOD RUNNING CONDITION. WEST COAST AREA. BEST DEAL CONTACT DAN. EMAIL: DANCRANE1122@YAHOO.COM; PHONE: 707-433-1122 –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR 970F AND 972H WHEEL LOADERS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587. –––––––––––––––––––––––––––––––– WANTED (AR): CHEVROLET UTILITY VEHICLES, ALL MODELS. LOOKING FOR TRUCKS, HEAVY EQUIPMENT, SUVS, ETC., NOT TOO MANY MILES. EMAIL: MLBAUTOSALES247@GMAIL.COM; PHONE: 501-533-5912. –––––––––––––––––––––––––––––––– WANTED (GA): JOHN DEERE HYDRAULIC BREAKERS, ALL MODELS. EMAIL: NEVINBLAKE@HOTMAIL.COM. –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR CRAWLER DOZERS - CAT D4 OR D5 LGP DOZER, HIGH DRIVE ONLY WITH CAB AND GOOD RUNNING CONDITION. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (NV): ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING FOR ANY CONDITION (WORKING OR NON). EMAIL: MINA@HIEEQUIPMENT.COM PHONE: 775-234-8837 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR WHEEL LOADERS. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1469 –––––––––––––––––––––––––––––––– WANTED (ME): CATERPILLAR 325C LC EXCAVATOR - USED SHEAR APPROX. 14" CUT TO MATCH MY EXCAVATOR, GOOD CONDITION. EMAIL: BILLD@TDICENZO.COM PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CASE BACKHOE LOADERS - I’M LOOKING FOR THE TACH PART THAT PRESSES INTO THE BLOCK OF A 207D NON TURBO FOR A 580 D CASE. EMAIL: JIMMYGEE@MTAONLINE.NET –––––––––––––––––––––––––––––––– WANTED (IN LA): CASE 450B # R39391 AIR CLEANER ASSEMBLY EMAIL: KNIGHTFLOORINGINC@GMAIL.COM; PHONE: 985-226-1939 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): ALL MODELS CATERPILLAR EXCAVATORS. URGENTLY LOOKING FOR SUPER LONG REACH EXCAVATOR 36M REACH AT 16 M DEPTH WITH 5 TON ROCK CARRYING CAPACITY - 2 NOS. EMAIL: BABURAO.SATARDEKAR@AFCONS.COM; PHONE: 009-1-757-482-7386 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS BOBCAT EXCAVATORS. EMAIL: EHAUBEN135@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NY): JOHN DEERE 350G EXCAVATORS. H&R CONSTRUCTION PARTS IS LOOKING FOR A 350G. WE BUY HIGH HOUR MACHINES,WRECKED MACHINES AND BURNED MACHINES. EMAIL: GKUTER@HRPARTS.COM; PHONE: 716-218-4946 –––––––––––––––––––––––––––––––– WANTED (MS): CASE 580L II BACKHOE LOADERS. NEED ENGINE HOOD DUE TO A STUMP. EMAIL: DENNIE1944@ATT.NET; PHONE: 228-533-7948 –––––––––––––––––––––––––––––––– WANTED (TX): GROVE A40NE AERIAL LIFT EMAIL: PWAYNE487@GMAIL.COM; PHONE: 432-803-7623 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 140G MOTOR GRADER AND 966F II WHEEL LOADER EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92346-265-3742 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS SCHWING CONCRETE MIXER/PUMP TRUCKS. ALL BRANDS, MODELS AND AGES. BOOM PUMPS TRUCKS, TRAILER/CITY/ & PARTS PUMPS PURCHASED. EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS. WE ARE LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. PLEASE CONTACT US IF ANY MACHINE AVAILABLE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR WHEEL LOADERS. WE ARE LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): CATERPILLAR HAULER TRUCKS. CAT AND VOLVO 25, 30 TON ARTICULATED TRUCKS AT WHOLESALE PRICES ONLY. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (NV): CATERPILLAR 966D, 966E, 966F, 966F II, 966G, 966G II, 966H, 970F, 970G, 972G, 972G II, 972H, 980G AND 980G II WHEEL LOADERS. EMAIL: SALES1@HIEEQUIPMENT.COM; PHONE: 702-529-5171 –––––––––––––––––––––––––––––––– WANTED (NM): SKYTRAK 10054 10,000# TELEHANDLERS / FORKLIFTS. LOOKING FOR A PRICE & AVAILABILITY ON A NEW SKYTRAK FORKLIFT. EMAIL: DOUBLEMENERGY@AOL.COM; PHONE: 575-391-0222 ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI EX600 EXCAVATOR. I AM LOOKING FOR A 17' ARM FOR A 600 HITACHI. EMAIL: JOHNK@NETNET.NET; PHONE: 920-655-3801 –––––––––––––––––––––––––––––––– WANTED (US): LINCOLN VANTAGE 500 WELDERS. I'M LOOKING FOR AT LEAST 6NO. VANTAGE 500 PREOWNED WELDERS FOR OUR COMPANY, OUR BUSINESS IS IN OIL AND GAS, PREFABRICATION, PLANT MAINTENANCE..ETC. EMAIL: FAYARD.HOSEIN@ ASEQUITHTT.COM; PHONE: 1(868)3962431 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D10N CRAWLER DOZERS. WANT TO BUY ALL THE TIME FROM USER ONLY. BULLDOZER- D3AT, D11, ENC CAB UNDER 3500 HOURS, UNADVERTISED. MUST BE 2015 AND UP. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (MI): JCB - ALL MODELS, MATERIAL HANDLERS. LOOKING FOR A JCB 940 OR COMPARABLE BRAND, ROUGH TERRAIN FORKLIFT. EMAIL: CWELLER@WELLERSALVAGE.COM; PHONE: 616-257-1326 –––––––––––––––––––––––––––––––– WANTED (AL): KENWORTH T8 SERIES DUMP TRUCKS AND MACK GU713 ROLL OFF TRUCKS. COMMENTS: CLASS 8 , ROLLOFF TRUCKS, DUMP TRUCKS, VOCATIONAL TRUCKS, ANY BRANDS, QUANTITIES, OR YEAR MODELS. I HAVE AN ONGOING NEED TO BUY LOTS OF THESE. EMAIL: CHUGHCUMMINGSJR@ GMAIL.COM PHONE: 205-907-9787 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX400LC-1 EXCAVATORS. EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: +923462653742 –––––––––––––––––––––––––––––––– WANTED (US) MANUFACTURER: CATERPILLAR 950B WHEEL LOADERS EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: +92-346-265-3742 –––––––––––––––––––––––––––––––– WANTED (PA): CATERPILLAR 973C CRAWLER LOADER. COMMENTS: LOOKING FOR A CATERPILLAR 973C READY TO GO TO WORK. EMAIL: CHICK@FITZEQUIP.NET PHONE: 215-805-3650 –––––––––––––––––––––––––––––––– WANTED (NM): CATERPILLAR ALL MODELS ROAD MAINTENANCE. COMMENTS: SOLICITO POR ESTE MEDIO LA COTIZACIÓN DE UNA RETROEXCAVADORA 4X4 Y UNA MOTONIVELADORA LAS DOS 2005 Y MARCA CATERPILLAR A NOMBRE DE LA EMPRESA GECOD S.A. DE C.V. EMAIL: BRAULIOALBERTO23@ GMAIL.COM PHONE: 287-110-3964 ––––––––––––––––––––––––––––––––

Page 110 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS

www.lyonauction.com 315-633-2944 • Albany, NY Sat., December 28, 2019 For: Annual Ford-New Holland Equipment Auction • Columbus (Delaware), OH Sat., January 18, 2020 For: Very Late Model Construction Equipment & more Auction • Houston, TX Tues., January 21, 2020 For: Complete Liquidation Retirement Auction • San Angelo, TX Wed., January 22, 2020 For: Very Large Late Model Rental Return Auction • Queretaro, Mexico Fri., January 24, 2020 For: Late Model Construction Equipment, Trucks & Trailers • Orlando (Kissimmee), FL February 1 - 9, 2020 For: 27th Annual Florida Auction • Buffalo, NY Thurs., February 27, 2020 For: Large Fabricating Company Liquidation • Las Vegas, NV Wed., March 11, 2020 For: Very Large Rental Fleet Construction Equipment Auction

RITCHIE BROS. AUCTIONEERS

www.rbauction.com 402-421-2631 • Ellenboro, WV February 5, 2020 • Orlando, FL February 17 – 22, 2020 • Las Vegas, NV March 12 - 13, 2020

ABSOLUTE AUCTION & REALTY, INC.

www.AARauctions.com 800-243-0061 • ONLINE ONLY Dec. 13, 2019 – Jan. 8, 2020 For: NY Equipment Auction

BAR NONE AUCTION

www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., January 11, 2020 For: Monthly Public Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Portland, OR Fri., January 24, 2020 For: Monthly Public Auction

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• ONLINE ONLY December 30, 2019 • ONLINE ONLY January 7, 2020 • ONLINE ONLY January 14, 2020 • ONLINE ONLY January 21, 2020 • ONLINE ONLY January 28, 2020

BIG IRON

www.bigiron.com 800-937-3558 • ONLINE ONLY December 26, 2019 • ONLINE ONLY January 8, 2020 • ONLINE ONLY January 15, 2020 • ONLINE ONLY January 22, 2020

DEANCO AUCTIONS

www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Headland, AL Jan. 30 – Feb.1, 2020 For: Huge 3-Day Public Auction

HESS AUCTIONEERS

www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., February 14, 2020 For: Trucks, Trailers & Equipment

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• ONLINE ONLY Wed., January 8, 2020 For: Absolute Online – Material Recovery LLC

I.R.A.Y. AUCTION

www.iraymn.com 320-968-7230 • Foley, MN Fri., March 6, 2020 For: Heavy Equipment, Truck & Trailer Public Auction

JEFF MARTIN AUCTIONEERS, INC.

www.jeffmartinauctioneers.com 601-450-6200 • Stanton, TX Wed., January 15, 2020 For: Permian Basin Unreserved Public Auction • Newberry, SC Sat., January 18, 2020 For: Absolute Auction – Cannon Associates & Others • Pelzer, SC Thurs., January 23, 2020 For: East Coast Winter Public Auction • Kissimmee, FL February 10 – 13, 2020 For: Annual Florida Auction • Brooklyn, MS March 6 - 7, 2020 For: Early Spring Construction & Transportation Public Auction • Pelzer, SC Wed., March 25, 2020 For: East Coast Early Spring Public Auction • Piedmont, SC April 2 - 9, 2020 For: Absolute Auction – Kennedy Electrical Suppy

J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163 • Plymouth Meeting, PA Sat., January 25, 2020 For: Construction, Utility Equipment and more • Verona, KY Thurs., February 13, 2020 For: Construction, Utility Equipment and more

McGREW EQUIPMENT COMPANY

www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues, January 14, 2020 For: Farm & Construction Equipment Auction

RTI AUCTIONS www.teitsworth.com 585-243-1563

• ONLINE ONLY January 7 - 14, 2020 For: January NetAuction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Mt. Pleasant, IA Fri., December 27, 2019 For: Truck Auction

• Seven Valleys, PA Tues, February 11, 2020 For: Farm & Construction Equipment Auction

• ONLINE ONLY January 3 – 8, 2020 For: Timed Online

PURPLE WAVE AUCTION

• ONLINE ONLY January 17 - 22, 2020 For: Timed Online

www.purplewave.com 866-608-9283

• ONLINE ONLY Fri., December 27, 2019 For: Truck & Trailer Auction • ONLINE ONLY Fri., December 27, 2019 For: Vehicles & Equipment Auction • ONLINE ONLY Mon., December 30, 2019 For: Ag Equipment Auction • ONLINE ONLY Tues., December 31, 2019 For: Construction Equipment • ONLINE ONLY Wed., January 8, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., January 9, 2020 For: Construction Equipment • ONLINE ONLY Tues., January 14, 2020 For: Government Auction • ONLINE ONLY Wed., January 15, 2020 For: Ag Equipment Auction • ONLINE ONLY Thurs., January 16, 2020 For: Truck & Trailer Auction

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

• ONLINE ONLY Thurs., January 23, 2020 For: Shop Equipment Timed Online Auction

VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., February 8, 2020 For: Heavy Construction Equipment and more

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Perris, CA Fri., February 7, 2020 For: Public Auction

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., January 11, 2020 For: Public Auction • Phoenix, AZ Sat., February 8, 2020 For: Public Auction

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 12 – 15, 2020 For: 46th Annual Florida Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 111

Important Auctions

315.633.2944 • www.lyonauction.com • www.lyonauctionlive.com

AUCTION CALENDAR 1.

ccc{ O]PG <G ;G >{ <RO

6$9( $ /,)( '21·7 '5,9( +20( %8==(' %8==(' '5,9,1* ,6 '581. '5,9,1*

Saturday, December 28: ALBANY, NEW YORK: Annual Ford-New Holland Equipment Auction. Very Late Model New Holland, John Deere, Cat, Komatsu Construction and Utility Equipment, Forklifts, Aerial Lifts, Trucks, Trailers, Attachments & Support. 2. Saturday, January 18: COLUMBUS (Delaware), OHIO: Very Late Model Cat, Case, Komatsu, John Deere Construction Equipment, Aerial Lifts, Forklifts, Attachments, Truck Tractors, Dump Trucks, Trailers, Support. 3. Tuesday, January 21: HOUSTON, TEXAS: Complete Liquidation Retirement Auction. Cat, Komatsu, John Deere, Earthmoving Equipment, Aerials, Attachments, Support. 4. Wednesday, January 22: SAN ANGELO, TEXAS: Very Large Late Model Rental Return Auction Consisting of Crawler Tractors, Rubber Tired Loaders, Tractor Loader Backhoes, Skid Steers, Telescopic Forklifts, Boom & Scissor Lifts, Air Compressors, Welders, Generators, Light Plants, Support Accessories Trucks and more. 5. Friday, January 24: QUERETARO, MEXICO: Late Model Cat, Case, John Deere, Volvo Construction Equipment, Aerial Lifts, Forklifts, Trucks and Trailers. 6-14. Saturday, February 1 to Sunday February 9: ORLANDO (Kissimmee), FLORIDA: 27th Annual Florida Rental Return Auction of The Finest New and Like-New Construction, Utility Equipment, Aerial Lifts, Forklifts, Landscape Tractors, Cranes, Air Compressors, Welders, Light Plants, Generators, Golf & Utility Carts, Pickups, Service Trucks, Dump Trucks, Truck Tractors, Water Trucks, Plus Very Large Quantity of Attachments, Tires, Tanks and Much More. 15. Thursday, February 27: BUFFALO, NEW YORK: Large Fabricating Company Liquidation. Complete Line of High Quality Fabricating Equipment that is Currently Working. 16. Wednesday, March 11: LAS VEGAS, NEVADA: Very Large Rental Fleet Construction Equipment Auction. Telescopic Forklifts, Aerial Lifts, Trucks & Trailers. 17. Saturday, March 14: SYRACUSE, NEW YORK: Construction Equipment, Attachments, Aerials, Trucks and Various Types of Trailers. 18. Monday, March 16: DALLAS (Ft. Worth), TEXAS: Rentals, Rentals. Construction & Utility Equipment, Attachments, Trucks and Trailers of all kinds. 19. Friday, March 20: MIDDLETOWN, NEW YORK: Late & Great Construction Equipment, Trucks and Trailers, Plus Attachments and Support Equipment. 20. Friday, March 20: TORONTO, CANADA: Late Model Rental Fleet Construction Utility Equipment, Areials, Forklifts, Support Trucks & Trailers. 21-23. Thursday, March 26, Friday, March 27, Saturday, March 28: ATLANTIC CITY, NEW JERSEY: Annual Construction and Rental Return Equipment Auction. The Latest & Greatest Construction & Utility Equipment, Aerials, Forklifts, Attachments, Large Quantity Support, Truck Tractors, Dump Trucks, Service & Pickup Trucks.

24.

us on

@Lyo nAuc tion!

Thursday, April 16: N. ATTLEBORO (BOSTON), MA: UNBELIEVABLE!!! Very Large Late Model Cat Snow Machine & Construction Equipment Auction: 90 Cat Rubber Tired Loaders, 35 Cat Skid Steers, 15 Excavators, Crawler Tractors, Telescopic Forklifts, Aerials, Equipment Trailers, Truck Tractors, Dump Trucks, Pickup Trucks, Snow Accessories & Support Equipment. THE BEST OF THE BEST, THE FINEST OF THE FINEST! 25. Friday, April 17: HARTFORD CONNECTICUT: Major Job Completion Aggregate & Construction Equipment, Truck Tractors, Dump Trucks, Service & Utility Trucks, Pickups, Various Trailers, Attachments, Support & More. 26. Thursday, April 23: AUBURN, NEW YORK: Complete Liquidation of Primarily Cat, John Deere, New Holland Construction Equipment-(3)Cat 621, (2)Cat D8H. 27. Friday, April 24: PITTSBURGH, PENNSYLVANIA: Retirement Auction. Late Model Dump Trucks, Truck Tractors, Service & Utility Trucks, Attachments, Large Quantity of Tires, Construction & Utility Equipment. 28. Thursday, April 30: LINCOLN, MAINE: Two Major Job Completions. 1 Very Large Forestry Featuring All Types of Logging Equipment and Trucks, and 1 Large Construction Equipment Spread of Later Model Cat, Komatsu, John Deere, New Holland Earthmoving Equipment, Forklifts, Aerials, Generators, Air Compressors and more. 29. Friday, May 1: PORTLAND MAINE: Retirement Auction. Late Model Cat, Komatsu, Case, Volvo Construction Equipment, Plus Telehandlers, Generators, Boom & Scissor Lifts, Trucks, Trailers and Support. 30. Saturday, May 2: MANCHESTER, NEW HAMPSHIRE: One-of-A-Kind 50-Year Old Collection of Some of the Finest Mack Collectibles on Planet Earth Along with Hundreds of Original Signs and Toys that Cannot be Found or Topped for Quality. 31. Saturday, May 2: ATHENS (Knoxville), TENNESSEE: Four Prime Commercial Properties and Construction Equipment. 32. Sunday, May 10: SYRACUSE, NEW YORK: Construction & Utility Equipment, Lawn & Garden Equipment, Compact Tractors, Loaders, Commercial Mowers, Utility Carts and More. 33. DTBA: ERIE, PENNSYLVANIA: Acquisition Auction. Late Model Cat, Komatsu, John Deere, Construction & Utility Equipment, Dump Trucks, Truck Tractors, Trailers, Attacments & Support. 34. DTBA: ELMIRA, NEW YORK: Three Large Operating Gravel Operations with All Permits. 35. DTBA: PITTSBURGH, PENNSYLVANIA: Complete Liquidation of Late Model Construction Equipment, Aerials, Trucks, Trailers, Large Quantity Support and Shop Equipment. 36. DTBA: MANCHESTER, NEW HAMPSHIRE: Rental Acquisition Auction of Late Model Rental Fleet Utility Equipment, Support, Attachments. 37. DTBA: RACINE, WISCONSIN: Late Model Construction Equipment, Aerial Lifts, Forklifts, Trucks, Trailers, Support & Attachments.

www.lyonauction.com

Page 112 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 113

Absolute ONLINE ONLY Auction Everything Sells To The Highest Bidder Regardless of Price!

Material Recovery LLC – Bethlehem, PA Bidding Closes: Wed., Jan. 8, 2020 @ Noon Eastern Bidding Begins: Fri., Jan. 3, 2020 Crawler Tractor: `87 CAT D11N, s/n 74Z00394, Cat 3508 dsl, U-blade w/twin tilt, 4-barrel multi-shank ripper Rubber Tired Loader: CAT 992C, s/n 42X00987, Cat 3412 dsl, spade nose bkt, Loadrite L2180 scale system 85 Ton End Dumps: `90 CAT 777B, s/n 4YC01257 • `89 CAT 777B, s/n 4YC01078 Crawler Screening Plants: `13 IROCK TS-516 Crawler Hydraulic Screening Plant, Cat C4.4 dsl, 5’x16’ 2-deck vibratory incline screen, folding side conveyors • `07 KEESTRACK Frontier Crawler Hydraulic Screening Plant, Deutz 4 cyl liquid-cooled dsl, 5’6”x14’3” 2-deck vibratory screen, folding side conveyors Crawler Conveyors & Portable Stacker: `16 TELESTAK TC421, 71’x42”, magnetic head pulley, Deutz dsl (1,713 hrs) • (2) `16 EZYSTAK TR6536 Crawler Conveyors, 65’x36”, magnetic head pulleys, Cat dsl (1,587 hrs & 2,620 hrs) • `16 IRON CITY SUPPLY 35’x24” Portable Hydraulic Stacking Conveyor, dsl engine (New Engine With Less Than 50 Hours) Cross-Belt Magnets and Belt Magnet Tower: (3) TEREX TXS440, 30”x78”, Suspended Hydraulic Cross-Belt Magnets (Removed From Crawler

Conveyors) • IMI 36”x66” Hydraulic Belt Magnet, 20’ high tower and manual winch controlled suspension height Material Handler: `02 LIEBHERR A904, s/n 66611230, Liebherr dsl, elevating cab, Mozelt 13KW, generator, 44” electromagnet, auxiliary hydraulics Electromagnet Attachments: UNUSED `18 DIMET DTM, 53”, s/n 8140, type 135 • `15 MOLEY ESA42, 42” Hydraulic Electromagnet Military 6x6 Tractor and Lowboy Trailer: `91 GENERAL 5 Ton, 6x6 Military Truck Tractor, Cummins 8.3L, 237HP diesel • `76 ROGERS 60 Ton Tri-Axle Lowboy

Call (800) BID-N-BUY or Email sales@hunyady.com For Complete Descriptive Brochure! www.Hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

AEM Hails USMCA Agreement Association of Equipment Manufacturers (AEM) president Dennis Slater issued the following statement Dec. 10 hailing a deal struck between House Democrats and the Trump Administration to move the USMCA closer to ratification: “This is good news for equipment manufacturers, the 1.3 million men and women of our industry, and the entire U.S. economy,” said Dennis Slater, president of the Association of Equipment Manufacturers (AEM). “We’re another step closer to getting the USMCA ratified. Getting this across the finish line will preserve duty-free market access to our most important trade partners, add more than $68 billion to the U.S. economy, and create 176,000 U.S. jobs. We applaud the work done by House Speaker Nancy Pelosi (D-Calif.), House Ways and Means Committee Chairman Richard Neal (D-Mass.), U.S. Trade Representative Robert Lighthizer, and everyone involved in these negotiations. We look forward to Congress ratifying the agreement and President Trump signing it into law.” Since the creation of NAFTA two decades ago, equipment manufacturers

have benefited greatly from duty-free market access to our industry’s two largest export markets, Canada and Mexico. Equipment manufacturers support 1.3 million jobs in the United States and 149,000 in Canada. The industry also contributes $188 billion to the U.S. and Canadian economies. Over the past two years, AEM has called on both the Trump Administration and Congress to deliver an updated North American trade agreement for the 21st century. USMCA fulfills many of our industry’s goals and strengthens North American equipment manufacturing. Efforts include co-hosting the Honorable Mike Pence, Vice President of the United States, at an equipment manufacturing facility earlier this year in support of the agreement, sending a letter in support of the USMCA to Chairman Neal (D-Mass.) and the nine members of the House Democrats’ Trade Working Group, and running an ongoing public education campaign on the various benefits of a ratified USMCA. AEM also is a member of the USMCA Coalition. For more information, visit www.aem.org/advocacy. 

Page 114 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Nearly 6,000 Bidders Vie for More Than 3,300 Equipment Anyone looking for aerial lift had many to choose from.

ore than 5,850 bidders participated online and in person at Ritchie Bros.’ multi-milliondollar unreserved public equipment auction Dec. 18, 2019, in North East, Md.

With bidders from 50 countries, approximately 89 percent of the equipment in the auction was sold to out-ofstate buyers, from as far away as Germany, Nigeria and Vietnam. Online

Cranes! Cranes! Cranes!

bidders purchased approximately 60 percent of the equipment sold (by dollar value). More than 3,350 equipment items and trucks were sold in the auction, including

105+ excavators, 45+ skid steers, 45+ loaders, 30 dozers, 185+ aerial work platforms, 85+ dump trucks, 235+ truck tractors, and more. All items were sold without minimum bids or reserve prices. CEG

Braving the cold were Tom Linton (L) of Digging & Rigging, Mount Airy, Md., and Alan Lynch of Gunpowder Excavating, Baltimore, Md. The weather didn’t phase Lynch, who showed up to the sale wearing shorts! The registration line went out the door at the final auction sale of 2019 at the North East, Md., site.

A Cat D8T was ready to go home with a new owner.

John Alexander of Alban Cat, Baltimore, Md., following the bidding.

A Komatsu HD605 rock truck rolls over the auction ramp.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 115

Items During Ritchie Bros. Auction in North East, Md. Forestry delimbers, feller bunchers, stump grinders and more were waiting for the right bid.

Several Caterpillar D6N crawler tractors are sold to the highest bidder at the Ritchie Bros. North East, Md., sale.

Cody Steller, a tree climber for Delmarva Tree, Smyrna, Del., was checking out some equipment he would love to operate in the future.

Clint Hill, a mechanic with EFG Paving, based in Dover, Del., is having a blast on the D8T.

Jimmy Siefert (L), an operator, and Joe Costantini, a foreman, both of JMC Contractors in Glen Mills, Pa., were checking out the inventory.

Luke Loboz, the president of Loboz & Associates, travelled from Illinois to look at some iron.

Anthony Boyer, a mechanic, and Dale Fairgrieve, a salesman, both of Bill Miller Equipment, Frostburg, Md., were dwarfed by this Komatsu HD605 tire, despite both men being more than 6 ft. tall!

Page 116 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention to Detail, Personal Touch Cat Celebrates 90 Contribute to Family Business Success Years on the New York Stock Exchange DELAUTER from page 10

and is in the midst of a $3.5 million storm water pond retrofit spanned by a new roadway bridge that will join two housing subdivisions.

Reputation W.F. Delauter & Son has maintained its impeccable reputation as a quality site contractor, relying on the same attention to detail Willie Delauter founded the company with in 1955. And yet, it preserves the personal touch of a small family business. “We are a family business,” Kirby said. He credits the company’s success to fair treatment of its employ-

With one International TD6 dozer, Willie F. Delauter and his son, Russell, started a business in Thurmont, Md., in 1955. W.F. Delauter & Son Inc. used that dozer to perform residential and commercial grading. Pictured is an invoice from a job in 1957.

After his father’s passing at age 57 in 1967, Russell hired a civil engineer in order to expand the business to pursue sanitary sewer, water and storm sewer projects, as well as larger grading projects.

The Moser Bridge

Delauter’s fleet consists of 12 large excavators, a variety of mid-sized excavators, scrapers, compactors, off-road trucks, track loaders, wheel loaders, track dozers, on-road dump trucks, fuel lube units, hydroseed units, large straw mulch stabilization blowers, roll-off containers and trucks, and full-site surveying and GPS control systems.

ees and the belief that by taking care of the employees, the employees will take care of the customers. Taking care of both employees and customers is crucial. In fact, the company’s mission statement reflects that belief: If we don’t take care of the customer, somebody else will. One of the ways he takes care of his staff is by paying top dollar and better benefits than most companies offer. Relationships are important to the Delauters. Kirby and Tina traveled to Korea in 2018 on a business trip. Kirby, who was an elected county council member representing District 5 in Frederick County, Md., at the time, was asked to address the Korean National Assembly about Korean-American relations. As part of his speech, he talked about his father’s service in the Korean War with the 3rd Infantry and showed a wartime photo of his father with a Republic of Korea soldier assigned to his platoon. “The Koreans in that meeting were so glad to hear this story,” Kirby said, “many had me send emails with that photo.” One even exchanged his lapel pin from their Justice

Department for Kirby’s Frederick County pin. The Koreans who had traveled with his group wanted to meet his father when they returned to the United States to thank him for fighting for their country. They set up a meeting with the Delauter family, bringing with them a certificate of appreciation and a medal made from the recently removed fencing in the DMZ. The medal, which was inscribed with thanks to Russell for his service and for standing up for their freedom, was awarded to Russell, who had been wounded in combat, and who served at the Chosen Reservoir and is a member of the Battle of Hungnam survivors’ group. The Past Is Prologue While they celebrate their 65th year in business, that original International TD6 dozer they started with now sits in front of their offices as a reminder of where they began. As for where they’re going, Kirby said his intentions are “simply to keep providing excellent service to our customers and to continue in a controlled-growth manner that allows us to grow and maintain quality.” 

Caterpillar Inc. Chairman and CEO Jim Umpleby rang the opening bell Dec. 17 on the New York Stock Exchange (NYSE) to mark the 90th anniversary of the company’s listing on the NYSE, which is considered the world’s foremost securities marketplace. Of the approximately 2,200 companies listed on the NYSE, Caterpillar is among only 3 percent that have been consecutively listed for 90 years or more. “I am proud of our entire Caterpillar team. Every day, they create solutions to help our customers build a better world,” Umpleby said. “Our team’s relentless focus on executing our strategy for profitable growth, including the advanced technologies that we are showcasing at the NYSE today, has given the company a strong balance sheet and the ability to return a significant part of our free cash flow to shareholders. Since 2017, we have repurchased about $7.1 billion in stock and paid about $3.5 billion in dividends.” As part of the celebration, Caterpillar gave Wall Street traders the opportunity to handle an advanced construction excavator simulator system. Through a panel of video monitors and remote-control technology, traders had the chance to take a turn at the excavator’s controls and attempt to dig virtual trenches, footings and more. There also was a variety of Cat machines on display in front of the NYSE including a wheel loader, wheeled excavator, industrial loader and compact loader, all of which have played a part in Caterpillar's historical success. Listing on the NYSE is a globally recognized signal of corporate strength and leadership, reserved for companies that meet the NYSE’s stringent requirements for income, market capitalization, cash flow and ethical practice. Caterpillar Inc. — 90 Years on the New York Stock Exchange • An investor buying one share of Caterpillar Tractor Company at $56.25 in 1929 would have an investment worth about $70,000* today, accounting for share price growth, stock splits and dividends over the past 90 years. (*As calculated at close on Dec. 2, 2019) • Caterpillar’s total shareholder return has sustained an annual compounded growth rate of 8 percent since the company listed in 1929. • On Dec. 2, 1929, the first listing day, 1.88 million shares were outstanding, and 400 shares of Caterpillar stock were traded. On Dec. 2, 2019, there were more than 550 million shares outstanding, and about 3 million shares traded. • Caterpillar was founded in 1925 and had its initial public offering in 1925 listed on the Pacific Stock Exchange (now NYSE Arca Inc.). The primary exchange listing on the NYSE began on Dec. 2, 1929. 

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 117

Page 118 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ACTIVE HEAVY DUTY COOLING ................................35

FIVE STAR EQUIPMENT INC ......................................21

NATIONAL ATTACHMENTS ..........................................35

AIM ATTACHMENTS ....................................................28

FLUID CONTROL SERVICES ......................................25

NATIONAL PAVEMENT EXPO ......................................50

ALEX LYON & SON INC

FOLEY INC ......................................................................2

NORRIS SALES CO INC ................................................6

PLAN AHEAD CALENDAR ................................111

GEHL..............................................................................72

NORTH AMERICAN ATTACHMENTS ..........................92

COLUMBUS OH 1/18..........................................113

GOMACO CORP ..........................................................42

NPK CONSTRUCTION EQUIPMENT INC..................100

KISSIMMEE FL 2/1-9 ..........................................117

H O PENN MACHINERY CO INC ................................15

PETERSON PACIFIC CORP ........................................94

ALEX PARIS CONTRACTING CO INC ........................23

HINIKER ......................................................................105

PLASTERER EQUIPMENT CO INC ..............................5

ALL ISLAND EQUIPMENT CORP ..................................7

HITACHI CONSTRUCTION MACHINERY ..................65

PRECISION COMPANIES ............................................28

AMERICAN EQUIPMENT LLC ......................................25

HITACHI EXCAVATOR..............................................74,75

ASV ..............................................................................77

HUNYADY AUCTION COMPANY

RANSOME ATTACHMENTS..........................................28 RITCHIE BROS. AUCTIONEERS

BAGELA USA ................................................................42

BETHLEHEM PA 1/3-8........................................113

BARGAINS ..................................................................107

HYDREMA US INC ........................................................29

BASCHMANN SERVICES INC......................................19

HYUNDAI CONSTRUCTION EQUIPMENT ............98,99

BELL TRUCKS AMERICA INC ....................................101

JCB INC ........................................................................71

BEST LINE EQUIPMENT ..............................................25

JESCO ............................................................................3

BOBCAT COMPANY......................................................67

JFW EQUIPMENT INC ..................................................46

BOMAG AMERICAS INC ..............................................54

JOHN DEERE ................................................................64

BRANDYWINE TRUCKS & EQUIPMENT CO ..............39

JOHN DEERE SKID STEER ......................................104

CARLSON PAVING PRODUCTS INC ..........................52

KEYSTONE FARM SHOW ............................................40

CEG SCALE MODELS ..................................................34

KOMATSU AMERICA CORP ........................................85

CEG WANTED ............................................................109

KOMATSU NORTHEAST ............................................8,9

CLASSIFIEDS ..............................................................108

KUBOTA EXCAVATOR ..................................................83

CLEVELAND BROTHERS EQUIPMENT CO ..........26,27

KUBOTA SVL ................................................................73

COMPANY WRENCH ....................................................40

LEEBOY ........................................................................51

CONSTRUCTION CRANE & TRACTOR ............43,45,47

LINK-BELT EXCAVATORS ......................................78,79

CONSTRUCTION EQUIPMENT GUIDE ..........38,62,112

LIUGONG CONSTRUCTION MACHINERY ................97

DANELLA USED TRUCKS & EQUIPMENT..................30

MAGELLAN CONSTRUCTION ....................................30

VOLVO CONSTRUCTION EQUIPMENT-NA ..........60,61

DEACON EQUIPMENT CO INC ..................................28

MAULDIN PAVING PRODUCTS ..................................48

WACKER NEUSON ..................................................90,91

DITCH WITCH EQUIPMENT CO ..................................96

MECALAC ......................................................................93

WEACO EQUIPMENT ..................................................20

DOMINION EQUIPMENT PARTS ..........................87,102

MESSICK’S ....................................................................20

WESTCHESTER TRACTOR INC..................................12

DYNAPAC ......................................................................58

METSO MINERALS SCREENING ..........................94,95

WIRTGEN AMERICA ................................................56,57

EAGLE POWER & EQUIPMENT CORP ....................119

MIKE ZYNDORF LLC ....................................................20

WOODS CRW CORP ....................................................17

ELLIOTT & FRANTZ INC..........................................12,50

MILTON CAT ..................................................................39

YANMAR AMERICA CORP ..........................................89

EQUIPMENT MART OF NEW YORK............................22

MUNICIBID.COM..........................................................111

YOUR NORTHEAST SITECH DEALERS ....................31

UNRESERVED PUBLIC AUCTIONS ................120 ROADTEC INC ..............................................................55 ROSCO MANUFACTURING ........................................49 RR EQUIPMENT............................................................40 SAKAI AMERICA INC ....................................................59 SCREEN MACHINE INDUSTRIES ..............................81 SHORQUIP SUPPLY INC..............................................37 SILVI CONCRETE ........................................................39 STEPHENSON EQUIPMENT INC ................................11 TAKEUCHI ....................................................................69 TRACEY ROAD EQUIPMENT INC ..............................13 TRANSPORT EQUIPMENT SALES..............................16 TRENCHTECH ..............................................................33 TRIPLE K COMPANIES ................................................30 VOLVO COMPACTION..................................................53

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 25, 2019 • Page 119

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Introducing the New Case CX D Series Excavator

RECENT TRADES

2013 Case 1121F Wheel 2014 Kubota SVL90-2 Loader, Stk# 35368, 3115 Hrs ... Compact Track Loader, Stk# ..................................$165,000 40806, 3525 Hrs............$38,000

1996 Case 850G Crawler Dozer, Stk# 41576, 6402 Hours.. ......................................$22,200

2014 Case CX160C Excavator, Stk# 40786, 2227 Hours..........................$111,000

2001 Case 85XT Skid Steer, Stk# 40010, 3410 Hrs ..$18,000

2002 Hitachi 160LC-5 Excavator, Stk# 41577, 8849 Hours ............................$25,500

Happy Holidays We at Eagle Power and Equipment would like to say thank you to all of our valued customers for the opportunity to serve you in 2019. From our entire staff, best wishes for a wonderful holiday season and a bright New Year!

Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Ring-O-Matic Vacuum Excavation • Airman Portable Air Compressors • Paladin Attachments Planers, Brooms, Buckets • Trailking Trailers

Frank Beck

Pat DiCicco

Dean J. Leonetti

Jim Lutz

Tom Scott

Rich Verna

Dean R. Leonetti

Brandon Jewell

Key Account Manager Montgomery County, PA

Key Account Manager, Philadelphia County, PA & Eastern Bucks County, PA

Philadelphia County, PA and Eastern Bucks County, PA

Montgomery County, PA and Western Bucks County, PA

New Castle County, DE, Cecil County, MD and Southern Chester County, PA

Chester County, PA and Delaware County, PA

Sales Manager

Toro Dingo Specialist

215/699-5871

610/312-3995

215/870-4546

215/680-9203

215/783-1847

215/870-8567

302/530-9134

610/420-4770

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM

1416 Phoenixville Pike, Suite 200 West Chester, PA 19380 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM

Page 120 • December 25, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Consign today to reach thousand a s of motivated buyers from around the globe. 855.679.8870 | rbauction.com m/Orlando2020