West #11, 2011 by Construction Equipment Guide

Published Nationally

$3.00

Western Edition

May 21 2011 Vol. VII • No. 11

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

I-70 Rockfall Presents Tricky U.S. Steel Stays Situation for Contractor Optimistic for Second Quarter

Midco to Carry Chicago Pneumatic Products...12

By Sandy Shore AP BUSINESS WRITER

Vaughan Auction Group Holds Sale...44

Ty Ortiz CDOT photo

Crews take stock of the rockfall situation above Interstate 70 in Colorado.

By Rebecca Ragain CEG CORRESPONDENT

Sales Strong for Cat Auction in Dallas...46

Table of Contents ............4 Crushing, Screening & Recycling Section ....13-20 Attachments Section21-24 Truck & Trailer Section .... ..................................33-36

Ryan Fetzer, president of Midwest Rockfall, feels like he aged 10 years in a month — courtesy of what was supposed to be a fairly typical, small-scale project. Midwest Rockfall was awarded an $800,000 rockfall mitigation project on Colorado’s Interstate 70, between Empire Junction and Georgetown. The scope of the project initially

Auction Section ......41-51 Advertisers Index ..........50

see ROCKFALL page 32

Truck Maker Volvo’s Q1 Profits More Than Double By Karl Ritter ASSOCIATED PRESS

Business Calendar ........37

included installing five different fences, plus some slope netting, to prevent rocks from rolling down a particular chute of Georgetown Hill and landing on the highway. It was projected to be an eight- or nine-person job and was scheduled to last about four months. Rockfall mitigation projects are common in the area. Since 2006, the Colorado Department of Transportation has spent between $8 and $9 million on Georgetown Hill mitigation proj-

STOCKHOLM (AP) Swedish truck maker AB Volvo saw profits more than double in the first quarter as demand for heavy vehicles improved worldwide, the company said April 27. The maker of Volvo, Mack, Renault and UD

trucks raised its outlook for its biggest markets — Europe and North America — where its truck sales were up by 33 percent in the first three months of 2011. Chief executive Leif Johansson said higher volumes and improved productivity helped lift profits.

United States Steel Corp. believes business will improve in the second quarter, as the recovering global economy sparks more demand for steel. The nation’s largest steelmaker forecast higher prices and stabilizing raw materials costs in the second quarter. The company said customer order rates have moderated recently, but it remained cautiously optimistic. It’s similar to outlooks from Nucor Corp. and AK Steel Holding Corp., which also expect better second-quarter results. The industry has seen some market weakness, particularly in construction, and expects some impact from auto production cutbacks following Japan’s earthquake and tsunami in March. “I think the one thing that all these companies are talking about are higher raw material and input costs, and those things seem to be front-page concerns,” Argus Research analyst Bill Selesky said. U.S. Steel Corp. said its first-quarter loss narrowed sharply as it sold more steel at higher prices, although it paid more for raw materials such as coal and scrap steel. It lost $86 million, or 60 cents per share, in the first three months of the year. That compared with a loss of $157 million, or $1.10 per share, in the same part of last year. The most recent results reflected an $81 million one-time gain on foreign currency exchanges. Sales increased 25 percent from the year-ago quarter to $4.86 billion. The results missed analysts’ estimates see STEEL page 32

see PROFITS page 32

Page 2 â&#x20AC;˘ May 21, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â?ČąČŚČą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą

2001 Komatsu PC138US-2, #80854, Blade, Aux Hyd, 8â&#x20AC;&#x2122; Arm, 4700 Hrs ..................$69,500

2006 Komatsu PC270LC-8LF, #81217, 60â&#x20AC;&#x2122; Long Reach, 33.5â&#x20AC;? Shoes, New Paint, 4500 Hrs ............................................................$156,000

2004 Komatsu D65EX-15, #80847, Cab/AC, 26â&#x20AC;? Shoes, Ripper, 4700 hrs ..............$159,500

2000 Bomag BW177DH-3, #81208, OROPS, Single-Smooth Drum, 1950 Hrs............$39,500

3-to-Choose!! Bomag BC1172RB Landfill Compactor, Cab/AC, Straight Blade, 7200+ hrs.. ........................................................Call Today!

2006 Komatsu PC400LC-7EO, #81398, 13â&#x20AC;&#x2122; Arm, 35.5â&#x20AC;? Tracks, HKX Kit, JRB QC, PSM Thumb, 4700 Hrs ................................$189,500

2007 Komatsu D41E-6, #91419, Cab/AC, 6-Way Blade, 20â&#x20AC;? Shoes, 2025 Hrs ......$84,500

1998 Komatsu PC300LC-6LC, #91161, Aux Hyd, QC, 8950 Hrs ..........................................$82,500

2004 Komatsu HM400-1, #80617, Tailgate, 6900 Hrs................................................$189,400

2003 Komatsu WA450-5, #81365, Cab/AC, GP Bkt w/BOE, 8700 Hrs ..........................$114,500

2005 Komatsu WA200-5, #81316, Cab/AC, JRB QC/Bkt, LSD Axles, 4550 Hrs ................$99,500

2005 Komatsu D65EX-15, #80659, Cab/AC, Drawbar, 3750 hrs ..............................$149,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 3

"In Business for over 29 Years" www.hendrixmachineryllc.com 2005 John Deere 550J LT, Stk# 7060, OROPS, 6 way blade, 462 hrs., 80% U/C, 8'6" Wide$36,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2008 Rayco C87L & Davco with Fecon Mulching Español Head, Stk# 7260, 1310 Hrs, Aux. Hyd, 14” Steel Pads, 4 Cyl Deutz Eng ............................$46,500

2005 Boxer Compact Track, Stk# 7186, 605 Hrs., 44” Bucket, 9” Rubber Tracks, Aux. Hyd, Perkins Diesel Eng. ...............................$14,500

2007 Cat D6N LGP, Stk# 7266, EROPS, A/C, 2003 Case 1850K XT, Stk# 7305, EROPS, A/C, 2006 Cat D5G XL, Stk# 7259, EROPS, A/C, Side Sweeps, Rear & Side Screens, 6 Way Blade, & Rear Screen, Sweeps, 6 Way Blade, 2,175 80% U/C, 4,729 hrs., Aux. Hyd.,33" Pads, Track St/Tilt Blade, 80% U/C, 3,608 hrs., 24” Pads, hrs., 20" Pads, 8' 10" Blade...................$69,500 to Track: 9' 11", Blade: 13' 5" ..............$139,500 11’3” Blade............................................$69,500

1996 Cat D5H LGP, Stk# 7277, OROPS, Rear Screen, 6 Way Blade, 80% U/C, 5,370 hrs., Carco Winch, 34" Pyramids Pads, 13' 4" Blade....$34,500

2008 Wacker 50KVA, Stk# 7273, 1246 Hrs, 50Va Trailer Mounted, Diesel Eng ..........$16,500

Ranch House Camp, Stk# 6361, New 8x24 Portable Camp House, 4 Bunk Beds, Restroom w/Shower, Sink, Camper Plug in for Electricity 2003 Terex TH636C Turbo, Stk# 7307, OROPS, or Generator Outlet................................$11,500 6000 Lbs, 36’, 3364 Hrs, 95% Foam Filled Tires, with Trailer ............................................$17,500 4WD, 4WS, 48” Forks, 4 Cyl. JD Eng ....$22,500

1983 Cat 623B Water Wagon, Stk# 7101, OROPS, BR8000T Tank, 29x39 Tires, Cat Diesel Eng ........................................................$29,500

2005 Komatsu D65PX, Stk# 7246, EROPS, A/C, Sweeps, Eng. Encl., Rear & Side Screens, St/Tilt Blade, 80% U/C, 6,762 hrs., Allied WG 6 Winch w/Fair Leads, 36" Pads, Track to Track: 9' 9", 13’ Blade .....................................................$89,500

2003 John Deere 670CH, Stk# 7212, EROPS, 4,270 Hrs., 12 ft Blade ..........................$89,500

1999 Cat 330BL, Stk# 7263, EROPS, A/C, 8469 Hrs, 80% U/C, 34” Bkt, 34” Pads, 11’3” Wide .... ...............................................................$69,500

2005 Bobcat 325, Stk# 6843, OROPS, 1,644 2006 New Holland L170, Stk# 7270, OROPS, 934 hrs., 70% Tires, RollCage, Aux. Hyd., Mech. hrs., 90° Boom, 80% U/C, 13" Bucket, Aux. Hyd., QC, 66" GP Bkt, 4 Cyl. NH Eng..............$17,500 w/Blade .................................................$16,500

2002 LinkBelt 290LX, Stk# 7299, EROPS, A/C, 8952 Hrs, 70% U/C, 46” Bkt, 32” Pads, 11’2” Wide, 6 Cyl. Isuzu Eng ...........................$59,500

1983 Cat D6D, Stk# 7313, OROPS, Eng. Encl, 2008 John Deere 310J, Stk# 7180, OROPS, Sweeps, Screens, St/Tilt Blade, 60% U/C, 5013 4WD, 998 hrs., 50% Tires, 24" Bucket, 2 Stick Hrs, Winch w/Fair Leads, Hand & Feet Controls, Control, No Aux.....................................$46,500 24” Pads, 10’ Blade................................$34,500

2001 Cat D6R LGP, Stk# 7289, EROPS, A/C, Sweeps, Rear Screen, Eng. Encl., St/Tilt Blade, 70% U/C, 11,862 hrs, Carco Winch, 36" Pads, 13’ Blade ...............................................$79,500

2001 Cat D6R XL, Stk# 7159, EROPS, A/C, Rear 2005 John Deere 310G, Stk# 7174, OROPS, 1997 Cat 325BL, Stk# 7251, EROPS, A/C, 2003 John Deere 850C LT, Stk# 7306, EROPS, Screen, St/Tilt Blade, 70% U/C, 16,853 Hrs., 4WD, 602 Hrs, 80% Tires, 24” Bkt, Quick A/C, 6-Way Blade, 90% U/C, 10,412 Hrs, 3 Shank Carco 70 Winch, 30” Pads, 11’8” ft. Blade......... 11,191 hrs., 80% U/C, 58" Bucket w/Thumb, 32" Connect, 2 Stick Control, Aux. Hyd .......$32,500 Ripper, 30” Pads, 13’1” Blade ................$59,500 ..............................................................$89,500 Pads, 11' 2" ...........................................$59,500

2003 Cat CP433E, Stk# 6744, 66" Pad Drum, 1,163 hrs, 80% Tires ............................$34,500

1998 Komatsu D41E-6, Stk# 7122, EROPS, A/C, 1994 John Deere 770BH, Stk# 7200, EROPS, 2005 Bomag BW177PDH-3, Stk# 7310, OROPS, 66” Pad Drum, 80% Tires, 1420 Hrs, 4 90% U/C, 6 Way Bld, 4,143 hrs., Komatsu DRP045- A/C, 8,510 Hrs.,14 ft M/B w/Slide & Tip Control, 3 Shank Ripper, 22" Pads, 10' Bld..............$36,500 3 Shank Ripper ...................................$139,500 Cyl Cummins Eng...................................$32,500

1999 John Deere 650G LGP, Stk# 6938, OROPS, Sweeps, Rear Screens, Eng. Encl, 6-Way Blade, 80% U/C w/40% Pads, 5283 Hrs, Winch w/Fair Leads, 10’ Blade, 24” Pads ....................$32,500

2005 Ditch Witch RT40, Stk# 7208, 953 Hrs, 50% Tires, 64” Blade, Sliding Boom, 3 Cyl. Deutz Eng. .............................................$11,500

2005 Cat 953C, Stk# 7269, EROPS, A/C, 8,352 hrs., 80% U/C, 3 Shank 953 Ripper, 8' 2" Bkt w/Teeth, 20" Pads, Wide ......................$49,500

2004 Bobcat 430G, Stk# 6486, OROPS, 2512 Hrs, Push Blade, 22” Bkt, Rubber Tracks ........... ..............................................................$18,500

2006 Komatsu D39PX, Stk# 7147, OROPS, Screens, Sweeps, 6 Way Blade, 2,095 hrs., 25" Pads, 9' 9" Blade ..................................$36,500

2005 Terex TX6622, Stk# 7014, 6000 Lbs, 22’, 2361 Hrs, 4WD, 4WS, 80% Tires, Air Filled, Deutz Eng ..............................................$19,500

2003 Cat D6R II XL, Stk# 7290, EROPS, A/C, Sweeps & Rear Screen, St/Tilt Blade, 11,627 1996 Cat 140H, Stk# 7279, EROPS, A/C, Low Pro 2005 John Deere 450J LT, Stk# 7051, OROPS, 6 Way Blade, 1,950 hrs, 80% U/C, 16” Pads ........ hrs., 80% U/C, Carco 70APS Winch, 24" Pads, Cab, 70% Tires, 70% Tires, 14 ft. M/B w/Slide & 10'7" Blade ..........................................$112,500 Tip Cntrl, Rear Ripper, Pushblock ..........$105,000 ..............................................................$36,500

Page 4 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

CASE TO TRANSITION OPERATIONS OF D3 EQUIPMENT IN SOUTHERN CALIFORNIA

D3 Equipment sells, rents and services Case construction and industrial equipment through three locations in El Cajon, Fontana and Santa Fe Springs.

U.S. TO ANNOUNCE PROGRAM TO REPAIR AGING PIPELINES

The government is calling on pipeline owners and operators to identify areas of high risk and accelerate critical repair and replacement work.

SANY AMERICA, SANY ELECTRIC TO TEAM UP FOR POWER EXPO Sany Electric offers a 2mW and 3mW wind turbine plus tideland construction and offshore wind turbine installation equipment.

MIDCO DEMOLITION TOOL CO. TO CARRY CHICAGO PNEUMATIC CONSTRUCTION EQUIPMENT With the addition of the Chicago Pneumatic line of construction equipment, Midco Demolition Tool Co. has now entered the business of selling new hammers.

MB AMERICA INC. NAMES POWER MOTIVE NEW DEALER

For more than 50 years, Power Motive has served the construction industry with quality products as well as product support.

VAUGHAN AUCTION GROUP HOLDS SALE IN WILLS POINT

Up for bid were skid steers, excavators and off-highway trucks from manufacturers such as Caterpillar and Case.

46 44

CAT AUCTION SERVICES DALLAS SALE A SUCCESS

Highlights from the sale included a 2008 Grove RT750E rough-terrain crane that sold for $300,000 and a 2007 Cat D6TXW dozer that brought in $225,000.

37 BUSINESS CALENDAR 39 CLASSIFIEDS 42 COMING AUCTIONS

EQUIPMENT… 33 KOMATSU HM300-3 Articulated Truck

Founder, Publisher & CEO Vice President Emeritus Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Edwin M. McKeon Sr. Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Contact Dale Agnew • Arizona • Colorado • New Mexico • Oklahoma • Texas • Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com Contact Frank Strazzulla • Alaska • California • Hawaii • Nevada • Oregon • Utah • Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel • Idaho • Montana

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com Construction Equipment Guide Western Edition (ISSN 306-484) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/5232200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2010, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 5

1997 Cat 950F Wheel Loader ....$77,500 1996 Cat D4H LGP Dozer ........$39,500 1996 Cat D6H Dozer ..............$69,500 2001 Cat D6R LGP Dozer ........$67,500

1999 Cat 330BL Excavator ........$87,500 1993 Cat 963 Crawler Loader ....$37,500 Cat 112 Motor Grader ............$12,500 1993 Champion 720A Motor Grader ..$42,500

2001 Cat 416C Loader Backhoe..$27,500 2001 Cat 420D 4x4 Ldr. Backhoe......$37,500 2002 Case 580SM 4x4 Ldr. Bakchoe $32,500 (2) Case 70XT Skid Steer ....$12,500 Ea.

(2) 1995 Cat 980F Wheel Ldrs ....$85,500 Ea. 1993 Cat EL240C Excavator ......$44,500 1996 Cat 322L Excavator ........$59,500 2001 Cat IT28G Wheel Loader ..$52,500

2001 Leeboy 1000C Paver ........$18,500 Raygo Gator ........................$17,500 Bomag BW142PD Compactor ....$18,500 1993 Hamm 2210 Compactor ..........$19,500

Page 6 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Made in the USA

SAVE TIME SAVE LABOR

SAVE MONEY SAVE OIL

The FlangeLock Tool allows for the simple sealing of open SAE Code 61, 62 & 62 KAT-Style hydraulic flanges without tools. Constructed out of lightweight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness. • No Tools Required • No Expensive Hardware Needed • No more Rags stuffed into hoses • No more messy Plastic Caps • The Ultimate Contamination Control Tool

• One hand Installation • Eliminate Hydraulic Oil Spills & Clean up • Quick Installation & Ease of Usage • Industry Acclaimed • 100% Made in USA • Safe for Personnel & Environment

For more information contact Mike Pearl

914.980.8890 email: mike@flangelock.com www.flangelock.com

SEAL SAVER PROTECTIVE CYLINDER COVER Stop the never ending cycle of cylinder repairs and avoid costly equipment downtime with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER protects seals and cylinder rods from premature failure extending the life of your equipment by preventing the ingression of contaminants into the hydraulic system. This unique preventative maintenance tool attaches easily and securely to the rod and cylinder head—usually in fifteen minutes or less—with no disassembly of the cylinder required.

The SEAL SAVER* WILL: Eliminate rod scoring • Extend the life of cylinder seals • Protect cylinders from the elements • Prevent pitting due to chemical washes • Reduce particle contamination of hydraulic systems • Minimize dings and dents associated with falling debris *Patented

SEAL SAVER has proven effective in Recycling, Construction, Mining, Rock Quarries, Waste Management, Refineries and Wood Products industries.

Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 7

THE ULTIMATE TEST OF MAN, MIND & MACHINE! Think you’ve got what it takes? Here’s your chance to prove it. The Case Triple Threat Rodeo is an operator skills competition that’ll test your mettle on a Case N Series loader/backhoe, F Series wheel loader and Alpha Series skid steer. It all starts at your local dealership for the preliminary round and ends at the National Championship held in Las Vegas. If you’re the best of the best, visit caserodeoseries.com Spectators and Fans win too! Your dealer has special discounts and financing rates for everyone attending!

Triple Threat Rodeo: May 6, 2011 - Austin (Manor), TX - 512-272-8922 June 4, 2011 - San Antonio, TX - 210-333-8000 www.ascoeq.com

Download a QR app for your smartphone and scan this code for more details. http://bit.ly/ttrcoop

Triple Threat Rodeo: May 14, 2011 - Euless, TX - 817-283-2844 May 21, 2011 - Houston, TX - 281-987-1990 www.hiwayequip.com

Call for Directions & More Information

© 2011 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. Ram is a registered trademark of Chrysler Group LLC. Any trademarks referred to herein in association with the goods and/or services of companies other than CNH America LLC. and Chrysler Group LLC. are the property of their respective owners.

Page 8 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Our Rock Crushers and Soil Stabilizers series can be used to scarify any material without ripping; such as gravel roads and asphalt roads. It can be operated with a standard agricultural tractor equipped with 4WD and creeper gear or a variable transmission starting from 80 HP to 360 HP.

Mike Mundt: (904) 625-9259 MichaelMundt@fccef.com Sarah Spraggins: (904) 625-9274 SarahSpraggins@fccef.com Toll Free: (800) 207-9286

2009 Kobelco SK210LC-8, s/n: YQ09-U4086, Asset#: 79752, 1475 Hrs, Springfield, IL, $126,000

CHECK OUR ENTIRE INVENTORY AT: WWW.FCCEF.COM Jacksonville, FL CONTACT US TODAY FOR MORE INFO!

2002 Caterpillar 5110B-ME, s/n: AAA00348, Asset#: 86410, 15427 Hrs, Park City, KS, $284,000

1978 Caterpillar D8K Pipelayer, s/n: 77V11362, Asset#: 66585, 268 Hrs, Park City, KS, $220,000 2007 Vince Hagan LMP-12C-100, s/n: 70614, Asset#: 68564, Like New, Valley Springs, CA, $449,000

PLEASE SEE OUR CURRENT INVENTORY LIST AT WWW.FCCEF.COM!

Case to Transition Operations of D3 Equipment in S. Calif. Case Construction Equipment plans to transition D3 Equipment’s operations in Southern California over to Case Power & Equipment stores. D3 Equipment sells, rents and services Case construction and industrial equipment through three locations in El Cajon, Fontana and Santa Fe Springs. James Hasler, North American leader, Case Construction Equipment, said, “We feel this is an important opportunity to grow the business that D3 Equipment developed. We are pleased with its management and success to date, and we recognize the industry is currently suffering from the lingering economic issues in the area. However, this is an important geographic region and we fully intend to continue supporting our customers, many of whom rely upon Case for their equipment, finance, parts and service support to keep their businesses competitive.” Case Construction Equipment will work closely with D3 Equipment to provide seamless equipment sales and product support to its valued customers. Case expects to finalize the transition within 60 days. For more information, visit www.cnh.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 9

U.S. to Announce Program to Repair Aging Pipelines ALLENTOWN, Pa. (AP) Federal transportation officials are launching a program to repair and replace aging oil and gas pipelines across the nation to prevent potential catastrophic explosions such as the recent deadly blasts in eastern Pennsylvania and California. Transportation Secretary Ray LaHood announced the initiative on April 4 in Allentown, where the Feb. 9 pipeline explosion leveled homes and businesses and killed five people, including an elderly couple and a 4-month-old boy. Last September, a 44-year-old gas transmission line ruptured in San Bruno, Calif., killing eight people, injuring dozens and leaving 55 homes uninhabitable. Investigators said the pipe had numerous flawed welds. And in Philadelphia in January, a gas main explosion sent a 50-foot fireball into the sky, killing a utility worker, injuring six people and forcing dozens from their homes. “People deserve to know that they can turn on the lights, the heat, or the stove without endangering their families and neighbors,” LaHood said in a statement. The government is calling on pipeline owners and operators to identify areas of high risk and accelerate critical repair and replacement work. The department plans new regulations to strengthen reporting and inspection requirements and making information about pipelines and the safety records of operators easily accessible to the public. LaHood said he also plans to seek legislation to increase oversight of pipeline safety, including increasing maximum civil penalties for pipeline violations from $100,000 per day to $250,000 per day and from $1 million to $2.5 million for a series of violations. Transportation officials say they plan an April 18 Pipeline Safety Forum at which state and industry officials and other parties are to discuss the problem. The number of pipeline-related accidents resulting in serious injury or death has been cut nearly in half over the last two decades, but the recent accidents “have highlighted the need to address the nation’s aging pipeline infrastructure.” Significant pipeline failures resulting in oil spills or gas explosion usually come from damage due to digging, corrosion and failure of the pipe material, welds or equipment, officials said. The latter is due to problems with valves, pumps or poor construction, they said. The Allentown utility has said that at the current pace it could take four decades to replace the rest of its aging, castiron pipelines, some of which are a century old. But UGI Vice President Robert Beard told a state Senate panel that the explosion could accelerate the utility’s efforts. The National Transportation Safety Board has said it decided not to investigate several additional pipeline accidents, including the Allentown blast and one in Philadelphia, because the current workload has strained the agency’s manpower. NTSB Chairman Deborah Hersman said in February that the board may include the findings of state investigators in safety recommendations. Steve Klejst, who heads the safety board’s section that investigates pipeline accidents, said he has only four pipeline investigators in his office.

SAFETY.CAT.COM SAFETY FETY Y.CA AT.COM™ INSURANCE

Page 10 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bayonetbreaker.com View at: YouTube/Bayonet Breaker

Covered By One or More of the Following US Patents: US 6,430,849 B1 US 6,751,896 B2 US 7,117,618 B2 US 7,257,910 B2

GO FROM EXCAVATING TO HAMMERING IN 3 SECONDS. FITS MOST MODELS OF BACKHOES AND EXCAVATORS

Certified Master Distributor for Bayonet Products

Sany America, Sany Electric to Team Up for Power Expo Sany America is teaming with Sany 1.1 in. (2.8 cm) wire rope and 36,000 lb. Electric at the Wind Power Expo in (16,329 kg) line pull. Anaheim, Calif., on May 22 to 25. Sany’s For maximum flexibility, though, the booth (number 2167) is one of the largest at SCC8300 offers six other boom configurathe show and will have both wind turbine tions in addition to its 59 ft. (18 m) wind equipment on display as well as information energy jib. This crane can do the work on the on the newest Sany Crawler Crane products windmill farm, then be transported easily to designed specifically for the wind power industry. Sany Electric offers a 2mW and 3mW wind turbine plus tideland construction and offshore wind turbine installation equipment, in addition to the grid windPV-battery complement hybrid power generation system. The 2mW wind turbine will be on display at the show as well as a model of a turbine. Sany America recently has added to its crawler crane lineup serving the wind power industry. In addition to the SCC3000WE and the SCC6500WE crawler crane, the SCC8300 was unveiled at Con-Expo with its new wind energy fixed jib attachment. The SCC3000WE was the first wind energy crane in Sany’s fleet. It features a Cummins QSM11 engine with a maximum horsepower rating of 400 hp. (298 kW). The main and auxiliary winches use 1 in. (2.5 cm) wire rope and have a maxi- Sany Electric offers a 2mW and 3mW wind turbine plus mum line pull of 30,800 lbs. tideland construction and offshore wind turbine instal(13,971 kg). lation equipment, in addition to the grid wind-PV-batThe main boom is 282 ft. tery complement hybrid power generation system. (86 m) long and when combined with the 23 ft. (7 m) fixed jib extension other jobs. Its width is less than 10 ft. (3 m) used for wind mill erection can reach to 312 and its main body breaks down to less than ft. (95 m) tip height. 100,000 lbs. (45,359 kg). The crane’s maxiEven at this height, the SCC3000WE can mum tip height is more than 515 ft. (157 m). lift more than 80 tons (72.5 t) at 45 ft. (13.7 It comes with a 400 hp (298 kW) Cummins m) radius. QSM11 engine, 1.1 in. (2.8 cm) wire rope The SCC6500WE was designed for the and 33,000 lb. (14,968 kg) line pull. With its bigger, taller towers and can reach with its roomy, Porsche designed Ultracab, the 335 ft. (102 m) main boom and 40 ft. (12 m) SCC8300 was designed for operator comfort jib 400 ft. (122 m) tip height. At this height and maximum visibility to aid the operator with its jib at 0 degrees offset the crane can in high lift, high capacity situations found on lift more than 120 tons (109 t); at 20 degrees a wind energy farm, according to the manuoffset, it still lifts 94 tons (85 t). This crane facturer. features a 440 hp (328 kW) Deutz engine, For more information, call 678/251-2857.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 11

Screen Soils

Mix Compost

Pipeline Padding

ALLU D-SERIES MODELS Screener Crushers & Fine Screening

• Over 70 models available to fit EVERY machine • High production even with wet muddy materials • 5/8” & 1” Screening size with replaceable hammers • Stronger outer shell for longer wear and less maintenance ALLU Group Inc. Info Call: 1-800-939-2558 | Email: usa@allu.net

CALL DOUG OR DAVE (866) 485-7180 WWW.RBUSED.COM

Page 12 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Midco to Carry Chicago Pneumatic Construction Equipment Midco Demolition Tool Co. in Dallas, Texas, has become a new dealer of Chicago Pneumatic’s line of hydraulic attachments, compressors and handheld tools. Midco Demolition Tool Co. has been in the business of repairing and rebuilding hydraulic hammers for nearly 25 years. The company’s technicians rebuild 600 to 700 hammers a year from around the country. Midco also carries parts, as well as more than 1,400 types of chisels and moil points. With the addition of the Chicago Pneumatic line of construction equipment, Midco Demolition Tool Co. has now entered the business of selling new hammers. Since taking on Chicago Pneumatic products in January 2011, Midco has sold 16 of its RX breakers. “David Spainhour and his team at Midco are exactly who we need to promote and support Chicago Pneumatic Construction Equipment,” said Paul McClendon, Chicago Pneumatic regional sales manager. “We are sure that their success with our breakers will continue as they add CP compressors and handheld tools to their product offering.” “We talked with Chicago Pneumatic for a long time. We tried out their hammers and they worked well,” said Spainhour, general manager of Midco Demolition Tool Co. “They are well built. Our customers are reacting really well, and everyone who has tried them has liked them. They operate well, look good and are cost-efficient. We’re proud to sell them.” For more information, visit www.cp.com

Paul McClendon (L), regional sales manager of Chicago Pneumatic, congratulates David Spainhour, general manager of Midco Demolition Tool Co., in Dallas, Texas, for becoming a new Chicago Pneumatic dealer.

Western States Challenges Equipment Expanding… Operators to Prove Skills During Rodeo MB America Inc. Names Power Motive New Dealer Western States Cat announced its first ever Western States Rodeo with challenges held at 12 locations across Idaho, Montana, Oregon and Washington to determine the best heavy equipment operators in the area. Operators will compete for prizes in a number of skillfocused contests during the rodeo, including the grand prize of a brand new 2011 Ford F-250 truck for the championship winner and a 226B3 skid steer for the winner’s sponsoring company. Winners from each location will battle for the best equipment operator title on Aug. 27 in Meridian, Idaho. “Cat equipment is known for its reliability and durability, so it is only fitting that we determine the best operators in our territory with challenges that test how they do under pressure,” said Western States President Tom Harris. “We believe our customers and operators are the most talented in their industries and are excited to recognize and reward their efforts during the 2011 Western States Rodeo.” Each of the local rodeo challenges will include five equipment events to test the skills and versatility of operators, from backhoe tire stacking to navi-

gating a skid steer through an obstacle course. Individual events may vary slightly by location, with each local contest winner receiving an award and an invitation to the championship round. “Beyond the competition, the 2011 Western States Rodeo is also a great opportunity for us to give back to each of the communities we serve through local charities and we thank our tremendous sponsors for making this happen,” continued Harris. Western States Cat and the Go On Idaho campaign are partnering to donate $500 to select local charities at each rodeo event, which will range from local Skills USA, Future Farmers of America (FFA) and 4H chapters to Diesel Mechanic and Construction School programs. Each event also will provide an opportunity for the selected organization to learn more about the industries served by Western States Cat and gain valuable volunteer experience. More than $6,000 will be shared with local charities throughout the course of the campaign. Cat, Ford, Carhartt and DeWalt are among more than 20 industry sponsors partnering to provide prizes to partici-

pants and event attendees. Together these sponsors will contribute more than $150,000 in awards and giveaways, including a new 2011 Ford F-250 pickup truck, a trip to Las Vegas for the National Finals Rodeo (NFR) and many other prizes. Each event will offer $2,500 in promotional giveaways. Following are the dates and times of each local contest: Meridian, Idaho: May 24-25 La Grande, Ore.: June 2 Pendleton, Ore.: June 7 Pasco, Wash.: June 14 to 15 Spokane, Wash.: June 21 to 22 Hayden, Idaho: June 28 to 29 Kalispell, Mont.: July 7 to 8 Missoula, Mont.: July 14 to 15 Idaho Falls, Idaho: July 27 to 28 Pocatello, Idaho: Aug. 2 to 3 Twin Falls, Idaho: Aug. 9 to 10 Lewiston, Idaho: Aug. 16 to 17 CHAMPIONSHIP Meridian, Idaho: Aug. 27 For more information, www.westernstatesrodeo.com.

visit

MB America Inc. has signed Power Motive of Denver, Colo., as a new dealer for the MB Crusher line of jawaction bucket crushers and screening buckets for hydraulic excavators. For more than 50 years, Power Motive has served the construction industry with quality products as well as product support. “Power Motive will be inventorying the MB Crusher BF 90, a hydraulic excavator mounted jaw type crusher bucket and the newly released MB-S18 screening bucket,” said Max Ravazzolo, CEO of MB America Inc. “These innovative hydraulic excavator attachments allow the contractor to economically recycle demolition waste including concrete, asphalt and aggregate on-site and inconjunction with our screening buckets, many useable materials can be turned from waste to cash. “We are proud to be represented by a company such as Power Motive and are excited to be included in their plans to open two more facilities in Colorado and one in Wyoming in the near future.” The MB America Inc. U.S. headquarters are located in Reno, Nev.

Crushing, Screening & Recycling Section

Pages 13-20

Kleemann Introduces EVO Series Kleemann’s EVO concept machines include the MR 110 Z EVO, MR 110 R EVO, and MR 130 R EVO and MR 130 Z EVO mobile impact crusher plants. The new EVO concept matches refinements for all individual components with a new material flow concept. The new material flow concept of the EVO models eliminates all restriction to the flow of the material throughout the entire plant, according to the manufacturer. For example, the discharge chute under the crusher is 4 in. (10 cm) wider than the inner width of the crusher, and the subsequent discharge belt is another 4 in. wider than the discharge chute. Material is thus transported quickly and carefully away from the critical area under the crusher, with flow rate increased and wear reduced. Even before the crushing takes place, there is an improvement in the material flow, due to the system widths of the feeder troughs and grizzly that facilitate flow of the material through the opening of the crusher. The independent and effective vibrating double-decker pre-screen improves the EVO models’ cost efficiency. In the EVO plants, vibration of the pre-screen and vibrating feeder below the crusher have been improved. Together with the newly designed crusher bypass — which features changes to both form and geometry — the entire system has been relieved of load and a significant contribution has been made not only to increased performance, but long-term life of the EVO models, according to the manufacturer. Optional new and improved screening units — now simpler and faster to assemble and disassemble — are available. These screening units now are significantly bigger, by more than 44 percent on the MR 110 EVO compared to its predecessor. With its

Kleemann’s EVO concept machines include the MR 110 Z EVO, MR 110 R EVO, and MR 130 R EVO and MR 130 Z EVO mobile impact crusher plants.

significantly increased screening area, this allows EVO models to deliver higher overall tonnages of between 350 or 450 tph (317 or 408 t) MR 110 EVO and MR 130 EVO, respectively. New Inlet Geometry The new crusher features highlights such as a new inlet geometry which allows even better penetration of the material into the range of the rotor. Also, the wear behavior of the new C-form impact ledges has been improved to such an extent that the edges remain sharper longer, leading to improved material shape. The rotor ledges are held

securely by a new clamping system, which means that they can be changed even quicker, and thus contribute to greater plant uptime. Enhanced performance is made possible in part by the direct drive with which both machines are equipped. A latest-generation diesel engine transmits its power almost loss-free directly to the flywheel of the crusher, via a robust fluid coupling and Vbelts. This drive concept enables versatility, as the rotor speed can be adjusted in four stages to suit different processing applications. Also, the newly developed and fully hydraulic adjustment capability of the crush-

ing gap permits greater plant uptime, while improving quality of end product. Not only can the crushing gap be completely adjusted via the electronic control unit, but the calculation of the zero-point is possible while the rotor is running. This ability to accurately set the crusher aprons from the control panel saves time, and improves the overall efficiency and handling of the crusher, according to the manufacturer. Further improvements include the new touch screen control unit, which allows the operator to run the crusher and diagnose faults with a user-friendly control screen. For more information, call 615/501-0600 or visit www.wirtgenamercia.com.

Page 14 â&#x20AC;˘ May 21, 2011 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Recycling Section â&#x20AC;˘ Construction Equipment Guide

These Grinders Mean Business.

This VisitVisit One of These Duratech Dealer Today! DuraTech Dealers Today!

5064 Horizontal Grinder 'XUD7HFKÂˇV YHUVDWLOH 1(: +RUL]RQWDO *ULQGHU LV EXLOW WR PHHW DOO \RXU JULQGLQJ QHHGV 1RW RQO\ LV WKH DYDLODEOH RQ HLWKHU D WUDFN RU WUDLOHU EXW \RX FDQ DOVR FKRRVH IURP WKUHH GLIIHUHQW OHYHOV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS NZ WR KS NZ 7KH ODUJH IHHG RSHQLQJ DQG LQ KDPPHUPLOO PD[LPL]H JULQGLQJ FDSDFLW\ DQG PLQLPL]H MRE WLPH 7KLV PLGVL]HG JULQGHU LQFUHDVHV \RXU HIĂ&#x20AC;FLHQF\ DQG PD[LPL]HV \RXU LQYHVWPHQW

Kelly Equipment 184 Woodlawn St. Upland, CA 91786 800-288-7933 Fax: 909-920-4558 www.kellyequipment.com

PO Box 1940 â&#x20AC;˘ Jamestown, ND 58402-1940

Powerscreen Launches Giant 1500 Maxtrak Cone Crusher Powerscreen has launched the new 1500 Maxtrak, the largest addition to the Powerscreen Maxtrak range, which includes the 1000, 1000SR and 1300 models. â&#x20AC;&#x153;In 2010, Powerscreen moved into what we view as the next generation of mobile crushing and screening equipment. With the launch of our largest ever jaw crusher, XA750, and largest ever screen, Warrior 2400, we are firmly positioning ourselves to meet the needs of the aggregates and mining segments. The addition of the 1500 Maxtrak to our range gives us one of the largest tracked mobile cone crushers on the market,â&#x20AC;? said Patrick Brian, Powerscreen global sales and marketing director. The 1500 Maxtrak is specifically developed for larger users. The plant can accept an all-in The 1500 feed from a primary crusher to mineral. produce up to 1,047 ton (950 t) per hour of aggregate or mineral. Utilizing the Terex Automax cone crusher technology, operators benefit from hydraulic overload

Maxtrak can accept an all-in feed from a primary crusher to produce up to 1,047 ton (950 t) per hour of aggregate or

protection, hydraulic crusher setting adjustment, excellent product shape and a high reduction ratio. Further customer benefits

include a highly efficient crusher direct drive system, large feed hopper complete with metal detector and contaminated material

purge facility, according to the manufacturer. For more information, visit www.powerscreen.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2011 • Page 15

Powercrusher™ Crushers & Screeners from Atlas Copco

Rock Star

There are many reasons why the Powercrusher is a star. The 11 models of crushers and six models of screeners offer capacities ranging from 250 to 500 tons per hour. Other features include: t Jaw crushers that use Quattro Movement, a figureeight motion that increases feeding capacity and produces a post-crush at the outlet—like two crushers in one. t A pre-screen feature available on the PC 6 model for higher value end product. t Track mounted for mobility and maneuverability in a smaller footprint. t National support for parts and service from Atlas Copco Powercrusher—POWER is just the beginning. 800-732-6762 Atlas Copco Construction & Mining www.atlascopco.us

Page 16 • May 21, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy”

Rasmussen Equipment Co. www.rasmussenequipment.com West Valley City, UT 801/972-5588

Waukesha-Pearce Industries, Inc.

Bane Machinery Inc.

Corporate Office: 12320 So. Main • Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com

www.banemachinery.com

Tomball, TX 281/351-9016

Port Arthur, TX 409/721-5305

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

Corpus Christi, TX 361/884-8275

San Antonio, TX 210/648-4444

Pflugerville, TX 512/251-0013

2449 Manana Rd. Dallas, TX 75220 214/352-2468

10505 North Fwy. Fort Worth, TX 76177 817/847-5894

Bejac Corporation www.bejac.com 569 S. Van Buren St. Placentia, CA 92870 714/528-6224

5501 East St. Anderson, CA 96007 530/378-0881

6934 Florin-Perkins Rd. Sacramento, CA 95828 888/655-3077

1445 Simpson Way Escondido, CA 92029 877/54-BEJAC

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2011 • Page 17

5x12 Three Deck Screen-It

SC 300 Closed Circuit Cone Crusher

6x16 Track w/Front Conveyor

Dodd Equipment 2301 West Buckeye Rd. Phoenix, AZ 85009 602-477-0110 www.doddequipment.com

Page 18 • May 21, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Track Mounted...

KPI-JCI Cone/Screen Plant Capable of High Production KPI-JCI, Johnson Crushers International Inc. has developed the GT200CC track mounted cone/screen close circuit plant, engineered exactly with a 6 by 12 ft. (1.8 by 3.6 m) — 2 deck vibrating screen. The 6 ft. screen width provides up to 20 percent more screening area and production capacity than comparable models, according to the manufacturer. The GT200CC features the Kodiak 200+ cone crusher, which was originally developed as a robust quarry duty cone crusher for traditional aggregate producers. When matched with the 6 by 12 ft. inclined screen, the GT200CC will provide an efficient and productive closed-circuit cone/screen system. With an on-board feeder, power unit, and control system, this plant is designed specifically for rapid set-up and tear-down for enhanced portability, but still provides

optimum crushing power. “Portable contractors and aggregate producers alike can deploy the GT200CC as a complete, self-contained mobile system for secondary crushing screening, or to crush surplus aggregates into more valuable crushed materials,” said Paul Smith, product manager at KPI-JCI. This machine is part of the global track line offered from KPI-JCI and Astec Mobile Screens. This model has the flexibility to pair with other Astec FT and GT track machines for a seamless processing system. The GT200CC has an optional detachable dolly that allows this plant to be transported without a trailer. It also has an optional discharge conveyor to stockpile two sized products For more information, call 605/668-2524 or visit www.kpijci.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2011 • Page 19

Powerscreen + Scania = Tier 4 Compliance

Powerscreen combines global resources, decades of experience crushers, screens and wash plants to match your needs. You can depend depe on your Powerscreen dealer for knowledgeable advice, skilled installation and responsive local support. Powerscreen machines with engines in the power range above 175hp now use engines from the global manufacturer, Scania. Scania’s engines are renowned for high uptime and reliability, proven fuel efficiency, and ease of maintenance. Scania has an excellent worldwide reputation and proven track record, and offfers f customer support with mor m e than 190 service locations across USA & Canada.

Powerscr Powerscreen een 11001 Electron Drive Louisville, Kentucky 40299

Visit us at stand 140.

Tel: T el: +1 502 736 5233 Email: gerald.mccarthy@powerscreen.com Web: Web: www.powerscreen.com

Terex is a registered trademark ark of T Ter erex Corporation in the United States of America and many other countries. Powerscreen is a registered trademark of Ter Terex GB Ltd in the United States of America and many otherr countries. Copyright T Ter erex Corporation 2011.

Page 20 • May 21, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

WHY BUY NEW

Sandvik Launches DI550 Down-the-Hole Drill Rig

OUR REBUILDS ARE JUST AS GOOD! We are your new authorized Stanley Cyclone drop hammer dealer.

4 5 6 7 8 9

MIDCO Demolition Tool Company Performs a Complete Teardown & Complete Rebuild Including: 1 - Remove the head. 2 - Pull the cylinder. 3 - Hot pressure wash the

entire unit. - Polish piston & check tolerances. - Rebuild & charge accumulator. - Install all new seals. - Repaint to spec. - Install new chisel & bushing. - All hammers include new hoses, seals, chisel or moil points, paint, OEM decals and final hammer testing.

MIDCO Rebuilds Hammers from 200 lbs. to 10,000 lbs. MIDCO Demolition Tool Company... Your “One-stop Shop” for New, Used and Rebuilt Hydraulic Hammers Plus Over 1,300 Hammer Tools and Parts for Sale!

OEM REPAIR FACILITY - DALLAS, TEXAS Call David Spainhour in Dallas,TX

214-688-0444 Fax 214-630-5419 Email dspainhour@midcosling.com

Authorized Dealer:

SALES • SERVICE • PARTS

The Sandvik DI550 is a down-the-hole drilling rig that features a 324 kW diesel engine and a 32 cu. yd. (24.4 cu m) compressor air flow at 24 bar pressure.

Businesses, large and medium sized quarries and contractors in particular, constantly need to improve the productivity of their operations. This means that it is of great importance to choose machines that do exactly the job they are supposed to — no more, no less. The Sandvik DI550 is a down-the-hole drilling rig that features a 324 kW diesel engine and a 32 cu. yd. (24.4 cu m) compressor air flow at 24 bar pressure — making the machine a perfect match for the 5 in. DTH hammer. This careful match of power and hammer size makes the rig uniquely productive, while keeping fuel consumption and operating costs as low as possible. Cost effective machine performance is further enhanced by other advanced features such as active diesel RPM control, optimized diesel RPM level during drilling and active control of compressor running temperature, according to the manufacturer. First-Rate Operator Environment On top of high performance, simple and comfortable machine operation was in focus during product development. Featuring a modern, accurate control system with simple icon displays and comprehensive service information, the new DI550 enables seamless co-operation of man and machine. The rig’s modern, over-pressurized ROPS and FOPS certified cab with its advanced ergonomic, efficient air conditioning, and enhanced visibility, further add to the operator comfort. The large windshield comes

with a strong safety bar that is easy to open for cleaning. The new, efficient dust collector with nonstop cleaning decreases the amount of dust emissions to the environment. It also improves filter lifetime and, therefore, reduces the need for maintenance. Other features that translate into easy maintenance and thus low downtime include the engine compartment’s open layout, easy cooler cleaning, modular compressor control system and simplified electric system. All daily maintenance points are located on the ground level to simplify the process and improve safety of service personnel. A fast fuel filling option and large fuel tank further cut costly downtime. Quality Guaranteed by Experience The new DTH line has benefited from Sandvik’s experience in hammer drilling solutions. The two product lines share many solutions, components and test procedure. Similarity between the two creates a commonness offering clear advantages for service and maintenance, according to the manufactuer. The DI550 is suited to work at its maximum performance with Sandvik’s RH550 hammers from 3 to 5 in. (7.6 to 12.7 cm). The RH550 hammers come with bits from3.5 to 6 in. (9 to 15.2 cm) with three different bit face designs. For more information, visit www.sandvik.com.

Attachments

SECTION

Pages 21-24

Helac Corporation Debuts the Helac Tilt Rotator for Excavators, Backhoes

The Helac tilt rotator construction equipment attachment for excavators and backhoes has simultaneous 110-degree tilting action and 360-degree continuous bucket rotation.

Helac Corporation, a manufacturer of hydraulic rotary actuators and construction equipment attachments, has introduced the Helac tilt rotator construction equipment attachment for excavators and backhoes with simultaneous 110-degree tilting action and 360-degree continuous bucket rotation. Helac’s Tilt Rotator innovation allows the user to simultaneously multitask without moving the machine. • Helac’s tilt rotator uses the helical sliding spline PowerTilt technology for the tilt function. • Both the tilting and rotating assemblies have harden, corrosion and wear resistant bearing, seal and sliding surfaces. • The narrow design features a fully enclosed tilting assembly and fully enclosed rotating assembly with no exter-

CEAttachment’s Edge Stump Removal Bucket Is a Multi-Function Tool CEAttachments, Inc.’s Edge stump removal bucket is an ideal attachment for landscape professionals or skid steer operators in need of a multi-functional tool for quick and easy removal of tree stumps and roots, digging ditches or moving and placing rocks. This attachment features three durable 23-Series cast steel teeth that dig deep under roots of tree stumps. With a tilt of the quick attach, side teeth on the bucket cut through stubborn roots and help extract the stump and roots from the ground. This attachment also can use its strong .5 in. (1.3 cm) laser-cut funnel-shaped steel bucket to scoop up and carry heavy rocks for placement on retaining walls. The 1 in. (2.5 cm) thick cutting edge will channel deep into the ground for digging trenches or excavating ditches. The Edge stump removal bucket has an over-

all length of 62.5 in. (159 cm), width of 46 in. (11 cm) and height of 20 in. (51 cm) The Edge stump removal bucket complements the lineup of other Edge tree tool attachments available through CEAttachments, including Edge stump grinders, a tree boom, tree handler, tree shears, Hi-Reach clipper, tree spades, UBlades and tree transplanters. For more information, visit www.ceattachments.com.

nal cylinders. • The Helac tilt rotator design offers the increased tilting capacity to further boost versatility and productivity. Unlimited continuous rotation and 55-degree side to side tilt are available. • Mount Helac’s tilt rotator directly to the machine and attach a coupler of choice to the gear box for ultimate compactness. • The Helac Tilt Rotator utilizes existing auxiliary circuits to keep the installation simple and the performance reliable. The oil distributor integrated plumbing results in trouble-free hydraulic connections to a hydraulic coupler and high flow double attachment such as a grapple, jaw bucket or every high flow shear or plate tamp. For more information, call 800/7978458 or visit www.helac.com.

Page 22 • May 21, 2011 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 1629 Vision Dr. Abilene, TX 79602 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977 3201 E Slaton Rd Lubbock, TX 79404 866/289-6087

CEAttchment Inc.’s New Edge Post Pounder, Puller Ideal for Fences CEAttachment Inc.’s Edge post pounder and puller is a useful attachment for quick and cost effective installation and removal of property line fences with solid steel or wood posts, and particularly in agricultural applications. This one-person operation will drive fence posts as wide as 10 in. (25 cm) and up to 10 ft. (3 m) long into the ground in minutes with its 50,000 lb. impact force. Use the attachment to pick up the post, position it using the 12 in. (30.5 cm) plumb chain, and use the power of the skid steer to drive it into the ground, even as low as 18 in. (45.7 cm) above ground. The Edge post pounder and puller also will pull old fence, small trees or steel posts 1 in. (2.5 cm) in diameter out of the ground with ease. An optional T-Post adapter kit is a simple accessory to assist in driving or pulling TPosts. The Edge post pounder and puller requires a minimum of 15 gpm (56.7 Lpm) hydraulic flow and is recommended for use on a skid steer with a minimum lift capacity of 1,650 lbs. (748 kg). For more information, call 866/232-8224 or visit www.ceattachments.com.

This one-person operation will drive fence posts as wide as 10 in. (25 cm) and up to 10 ft. (3 m) long into the ground in minutes.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 21, 2011 • Page 23

RX Hydraulic Breakers… 13 models – match the breaker to the job Hybrid gas/oil technology Designed with fewer components to maintain Power Boost to increase blow frequency Power Stop to safely prevent no-load blows On-site easy maintenance Innovative, reliable, heavy-duty … for demolishing, primary/secondary crushing, ditching, recycling, road construction, and landscaping!

800.760.4049 www.cp.com

Think RED...Think Chicago Pneumatic!

Page 24 • May 21, 2011 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 25

Page 26 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 27

Page 26 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 27

Page 28 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

International 350 Payhauler, 1:25 Scale ........ Grove GMK4115L Truck Crane, 1:50 Scale .... ..................................................................$260 ................................................................$225 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ............$70 Allis-Chalmers HD-41 Dozer, 1:25 Scale......................$185 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$65 Bantam C-35 Crawler Shovel, 1:50 Scale ......................$65 Bantam Truck Mounted Shovel or Backhoe; 1:50 Scale .... ..........................................................................................$90 Bobcat A300 Wheel Loader, 1:25 Scale ........................$25 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader ..............................................................................$40 Bobcat M-743 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat S175 Skid Steer Loader, 1:50 Scale..................$20 Bobcat S175 Skid Steer Loader, 1:25 Scale..................$40 Bobcat S185 Skid Steer Loader, 1:25 Scale ..................$30 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale..................................................................$60 Bobcat 325 Mini-Excavator, 1:25 Scale ........................$30 Bobcat 753 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$30 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$30 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$85 Caterpillar 4-Piece Earthmover Set, 1:64 Scale ............$85 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ............................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$45 Caterpillar D6T XW Track-Type Tractor ........................$65 Caterpillar D8R Track Type Tractor, 1:50 Scale ............$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$75 Caterpillar D11T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 24H Motor Grader, 1:50 Scale ......................$90 Caterpillar 140M Motor Grader, 1:50 Scale....................$70 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale .. ..........................................................................................$35

Bantam C-35 Shovel, 1:50 Scale ............$65

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ......$30 Caterpillar 297C Multi-Terrain Loader, 1:32 Scale ........$35 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ................$35 Caterpillar 323D L Excavator, 1:50 Scale ......................$50 Caterpillar 320D Excavator, 1:50 Scale..........................$65 Caterpillar 365B Excavator, 1:50 Scale..........................$65 Caterpillar 385C Excavator, 1:50 Scale..........................$60 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$45 Caterpillar 511OB Excavator, 1:50 Scale ......................$98 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $35 Caterpillar 725D Articulated Truck, 1:50 Scale ............$60 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$70 Caterpillar 785D Mining Truck, 1:50 Scale ..................$140 Caterpillar 836G Landfill Compactor, 1:50 Scale..........$50 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $40 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$45 Caterpillar 963D Track Loader, 1:50 Scale ....................$55 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$45 Caterpillar 977 Traxcavator, 1:50 Scale ........................$35 Caterpillar 988H Wheel Loader, 1:64 Scale ..................$30 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$70 Gradall XL4300II Excavator, 1:32 Scale ........................$75 Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$50 International TD-15 Dozer, 1:87 Scale............................$40

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu PC2000-8 Front Shovel, 1:50 Scale ................................................................$225

International TD-24 Ag/Crawler, 1:50 Scale ..................$40 International TD-24 Military Dozer, 1:50 Scale ..............$45 International TD-25 Dozer, 1:87 Scale............................$40 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$45 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$65 John Deere 200D LC Excavator, 1:50 Scale ..................$40 John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........$35 John Deere 400D Articulated Truck, 1:50 Scale ..........$40 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale....$30 John Deere 748H Log Skidder, 1:50 Scale ....................$45 John Deere 850J Crawler Dozer, 1:50 Scale ................$40 Komatsu 960E Mining Truck, 1:50 Scale ....................$250 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$60 Komatsu D51 EX Dozer, 1:50 Scale ..............................$60 Komatsu D51 PX Dozer, 1:50 Scale ..............................$60 Komatsu D375 Dozer, 1:50 Scale ..................................$85 Komatsu GD655 Motor Grader, 1:50 Scale....................$60 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$70 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$75 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$225 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40 LBX 210 X2 Excavator, 1:40 Scale ................................$70 Link-Belt 3200 All Terrain Crane, 1:50 Scale ..............$180 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ......$160 LeTourneau Super C Scraper w/Cab, 1:50 Scale..........$80 LeTourneau Military Super C Scraper, 1:50 Scale ........$50 Northwest 25-D Backhoe, 1:50 Scale ............................$90 Northwest 25-D Shovel, 1:50 Scale................................$90 Terex PPM AC40/2L ATC, 1:50 Scale............................$175 Terex RC45 RTC, 1:50 Scale ........................................$185 Terex Demag AC100/4 ATC, 1:50 Scale........................$180 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo SD-122 Soil Compactor, 1:72 Scale ....................$40 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$45 Volvo L90E Wheel Loader, 1:50 Scale ..........................$70

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 29

Let us re-introduce ourselves.

Formerly a division of Ingersoll Rand, we’re known for innovative solutions and inspiring service. We’re the portable power product that actually needs no introduction, except for our new name.

COMPR E SS O R S G E N E R AT O R S LIGHTING SYSTEMS

DOOSAN PORTABLE POWER.

DRILL AIR MODULES L I G H T COMPAC T I O N T RUCK- MOUNT ED EQUIPMENT

Air Compressor Solutions, Inc.

Volvo Construction Equipment & Services

Odessa, TX (432) 335-5900

Bakersfield, CA (661) 387-6090

Ditch Witch of Arizona

Fresno, CA (559) 834-4420

Phoenix, AZ (602) 437-0351 (602) 437-1544 (Fax)

Ditch Witch of Southern Arizona

San Leandro, CA (510) 357-9131 Sacramento, CA (916) 388-2244

Tucson, AZ (520) 579-0261 (520) 579-0268 (Fax)

San Diego/ Lakeside, CA (619) 441-3690 Corona, CA (951) 277-7620 Arlington, TX (817) 633-1010 Houston, TX (713) 681-9221

Pape Material Handling Inc. /

Bobcat West

www.papemh.com

www.bobcatwest.com

7000 SW Sandburg Rd. Portland, OR (503) 639-8910

9892 40th Avenue South Seattle, WA (206) 722-5800

1224 North California Avenue Pasco, WA (509) 545-1959

7909 N. Upland Dr. Portland, OR (503) 286-6400

19705 60th Avenue NE, Suite B1 Arlington, WA (360) 474-8461

4890 Contractors Drive Wenatchee, WA (509) 884-2934

29550 Airport Road Eugene, OR (541) 689-7407

1307 54th Avenue East Fife, WA (253) 926-4386

5518 East Broadway Spokane, WA (509) 536-7300

500 Pech Road Medford, OR (541) 779-3444

3896 Irongate Road Bellingham, WA (360) 756-6572

25 Vista Boulevard Sparks, NV (775) 356-9333

909 South 18th Street Yakima, WA (509) 248-5636 Doosan DoosanPortable IngersollPower Rand

Find Us on

DoosanPortablePower.com

(800) 633-5206

Page 30 â&#x20AC;¢ May 21, 2011 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

KIRBY-SMITH MACHINERY INC.

DOZERS From Komatsu â&#x20AC;&#x201C; The Dozer Experts

6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 www.kirby-smith.com

POWER MOTIVE CORPORATION 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098

ROAD MACHINERY LLC 0VS % % % BOE % %P[FST HJWF ZPV UIF SFMJBCJMJUZ BOE WFSTBUJMJUZ ZPV FYQFDU GSPN UIF EP[FS FYQFSUT BU ,PNBTUV 5IFTF BOE IPSTFQPXFS NBDIJOFT IBWF UIF GFBUVSFT ZPV OFFE UP DPNQMFUF ZPVS KPCT PO UJNF BOE PO CVEHFU t )ZESPTUBUJD 5SBOTNJTTJPO )45 GPS TVQFSC BDDVSBDZ BOE TNPPUI DPOUSPM t &YDFMMFOU CMBEF WJTJCJMJUZ UIBU NJOJNJ[FT PQFSBUPS HVFTTXPSL BOE SFEVDFT DZDMF UJNFT t "MM EBJMZ NBJOUFOBODF QPJOUT DFOUSBMJ[FE JO POF MPDBUJPO GPS DPOWFOJFOU BDDFTT

XXX LPNBUTVBNFSJDB DPN X XX LPNBUTVBNFSJDB DPN

4710A E. Elwood â&#x20AC;¢ Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-778-5621 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 31

Page 32 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unexpected Complications Increase I-70 Project Costs

Improving Demand Spurs U.S. Steel Corp. Optimism STEEL from page 1

ROCKFALL from page 1

age Georgetown homes. So, in addition to the standard netting used in such projects, Midwest Rockfall put in place a temporary protection system that utilized 30-yd. dumpsters stacked together “like Legos,” as Fetzer put it, to build a make-shift berm. A row of shipping containers on the far side of the interstate formed another protective barrier. The day that Midwest Rockfall crews were scheduled to move the rocks down the hill, hundreds of people gathered to watch; Georgetown schoolchildren were freed from their classes for the occasion. The Georgetown Hill portion of I-70 was closed for eight hours during rock scaling, as crews inflated special airbags that filled until the rocks broke free of the slope.

ects. With more than 40 chutes to channel rocks toward the interstate, Fetzer said that Georgetown Hill is “one of the most-looked-at hills in the country” in terms of stabilization methods. The chute that Midwest Rockfall began working on this January begins 1,500 ft. (457.2 m) above the highway; much of the work is done with helicopters. On the lower slopes, crews are using a crane purchased last year from Stevenson Crane Service of Bolingbrook, Illinois: a Manitou MRT telehandler, with a reach capacity of 67.6 ft. (20.6 m) “We also have a man basket we can put on it; we have forks for it; it will take a bucket and [we can] move a limited amount of dirt with it, though it’s not made for digging. It’s a real handy machine,” Fetzer said. Approximately two weeks into the project, things got complicated. It came to CDOT’s attention that a rock nest approximately 350 ft. (106.6 m) up Georgetown Hill could be more of a risk than initially estimated, due to the pace at which the dirt base under the boulders was eroding. So, a series of engineers re-examined the site and made recommendations. “It wasn’t like it was discovered, ‘Oh my God, this is horrible.’ It got more serious as time went on,” said Fetzer. CDOT’s Web site explained: “The boulders have a high potential of coming loose and down to I-70. Engineers will not know Midwest Rockfall put temporary protection systems in how long it will take to remove all the boul- place to try and contain the loose stone. ders until the depth of the cluster can be fully examined.” Other equipment used on the project included “CDOT’s engineers and outside consultants Caterpillar 320 and 330 excavators and a Caterpillar decided collectively that the rocks needed to come 966 loader, all rented from Wagner Equipment Co. down immediately,” said Fetzer. “So we dropped Because out-of-state projects make up 75 percent of everything we were doing on the rest of the contract Midwest Rockfall’s business, renting is more effiand it was all hands on deck to get systems in place cient than hauling equipment thousands of miles to to remove the rocks that were 350 feet up the hill.” the job site. Removing the rocks meant closing down I-70 in “It doesn’t make a lot of sense for us to buy stuff an area that serves 30,000 motorists daily. like standard loaders, dozers, excavators. Most of Commerce was affected; local ski resorts, in partic- what we own is pretty specialized to the rockfall ular, were far from thrilled with the shutdown. In industry,” said Fetzer. addition, because I-70 is a major trucking route, the With the high-profile rock scaling and interstate state had to advertise the closure as far away as closure out of the way, Midwest Rockfall can wrap Georgia, according to Fetzer. up the rest of the contract by installing rockfall The project’s ramifications continued to escalate: attenuator fences to act as a permanent catchment Midwest Rockfall received calls from the state gov- system. ernor’s office and from the media; NPR covered the Given the unexpected complications of what has rockfall mitigation project, as did Denver-area mushroomed into a $1.5-million project, it was media. Concerned citizens were also following the unreasonable to expect crews to finish by the origiproject closely. Residents who lived across the nal date of May 26. Instead, Midwest Rockfall has interstate “swore up and down they could see this agreed to finish all work requiring traffic control by whole pile of stuff [the rock nest] moving,” said that date; other tasks will continue into July. Fetzer. Although Fetzer says that April was the toughest Much of the attention was focused on the possi- month Midwest Rockfall has ever had, “We got bility that the boulders being removed would roll through fine, everybody’s happy. across the interstate, down another slope, and dam“And I’m a little older because of it.” CEG

for a loss of 33 cents per share on revenue of $4.89 billion, according to FactSet. “The biggest takeaway from the U.S. Steel report is that things are slowly improving on a demand basis,” Selesky said. During a conference call with analysts, Chairman and CEO John Surma said he believes demand will be firm across most markets in the second quarter; including containers, appliances, pipes and construction. He said some service and processing centers might cut back on buying steel because they are trying to moderate inventories. Those centers buy steel in large quantities and hold it in inventories until it is sold to customers. He also said the company is looking at ways to shift its energy resources, at least in part, from coal and coking coal to natural gas as a way to reduce costs and lower carbon emissions. U.S. Steel has posted consecutive quarterly losses since December 2008 as demand fell from automakers, construction companies and other customers as the recession ran its course. The company said first-quarter flat-rolled steel shipments rose three percent from the fourth quarter to four million net tons. The average price increased $63 per ton to $720 per ton. Flat-rolled steel is used in a range of products, from automobiles to appliances. Shipments of pipe products rose 10 percent from the fourth quarter to 425,000 tons but the average price fell $57 to $1,447 per ton. In Europe, U.S. Steel’s shipments rose 17 percent from the fourth quarter to 1.4 million tons due to stronger demand. The average price rose $30 per ton to $823 per ton. The company is evaluating effects on its business from the March 11 earthquake, tsunami and ensuing nuclear plant crisis in Japan that closed some factories and slowed auto production. Surma noted that some automotive customers have adjusted production schedules because of parts shortages. “We expect reductions in automotive production during the quarter to be made up in 2011 as vehicle inventories, presently low compared to historical levels, will need to be replenished,” he said in a statement.

Construction Equipment Sales on the Rise for Volvo PROFITS from page 1

The company, based in Goteborg on Sweden’s west coast, said it expected total market sales in both Europe and North America to reach 230,000 to 240,000 vehicles. That was up from an earlier estimate of 220,000 trucks in each market. “The North American truck market is driven primarily by the need to replace the increasingly older truck fleet with more modern and fuel-efficient trucks and by a positive trend in the U.S. economy and corresponding higher freight volumes,” Johansson said. Volvo also saw higher sales of construction equipment; including dump trucks, wheel loaders and excavators; while its bus sales were down by 4 percent. The company said it expects to invest $100 million over the next few years in its construction equipment manufacturing plant in Shippensburg, Pa., where it plans to make wheel loaders, excavators and articulated haulers. Johansson said production at Volvo’s Japanese subsidiary, UD Trucks, was disturbed by the March 11 earthquake and tsunami. “We have a number of suppliers in Japan that are having difficulties in restarting their production, which means that we anticipate considerable disturbances to the production at UD Trucks during the second quarter,” the CEO said.

Trucks & Trailers

SECTION

Pages 33-36

HM300-3 Powered by Komatsu Tier IV Interim Technology With a flywheel horsepower of 325 hp (242 kW), Komatsu’s HM300-3 articulated truck is powered by a Komatsu SAA6D125E-6 engine and is EPA Tier IV Interim and EU Stage 3B emission certified. The HM300-3 features a maximum gross vehicle weight (GVW) of 115,147 lb. (52,230 kg). It can haul up to a 31 ton (28.1 t) payload at its maximum ground speed of 36.4 mph (58.6 kmh). Improved operating performance, lower fuel consumption, improved operator comfort and enhanced serviceability are additional features of the HM300-3 that provide maximum productivity and lower operating costs, according to the manufacturer. The HM300-3 is equipped with the latest Komtrax technology, which sends machine operating information to a secure Web site utilizing wireless technology. Data such as daily fuel consumption, machine utilization, operating hours, location, cautions and maintenance alerts are relayed to the web application for analysis. The Komtrax fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides a wealth of other information to drive business efficiency and productivity. Special features of the new HM300-3 include: • EPA Tier IV Interim and EU Stage 3B Emission Certified Engine Built upon Tier III technology, the SAA6D125-6 engine provides increased horsepower while lowering fuel consumption. The Komatsu Tier IV Interim engine uses an advanced electronic control system to manage air flow rate, fuel injection, combustion parameters, and aftertreatment functions to optimize performance, reduce emissions and provide advanced diagnostic capability. Komatsu also has developed a hydraulically actuated Komatsu variable geometry turbocharger (KVGT) and an exhaust gas recirculation (EGR) valve, resulting in better precision and air management as well as longer component life. The Komatsu diesel particulate filter (KDPF) has an integrated design that will not interfere with daily operation but will keep the operator aware of its status. • Improved Operation The HM300-3 features the new Komatsu traction control system (K-TCS). The K-TCS system automatically provides optimum traction when operating in soft ground conditions. As ground conditions worsen and tire slippage is detected by speed sensors located on four wheels, automatic application of the inter-axle differential lock occurs. If tire slippage continues to be detected then four independent brakes can be applied to slipping wheels to regain traction. The HM300-3 is enhanced with K-ATOMiCS—Komatsu

The HM300-3 can haul up to a 31 ton (28.1 t) payload at its maximum ground speed of 36.4 mph (58.6 kmh).

Advanced Transmission with Optimum Modulation Control System. K-ATOMiCS offers a six-speed, fully-automatic transmission that uses an advanced electronic system to eliminate shift shock and torque cutoff to improve operator and engine efficiency. It automatically selects the ideal gear based on vehicle speed, engine rpm and the shift position chosen, which results in powerful acceleration, smooth down shifting and synchronized engine speed when climbing slopes. This ultimately minimizes operator fatigue, keeps the load in the body and increases productivity. A large automatic retarder allows the operator to select the optimum operating speed on downhill travel and fully loaded hauls, eliminating acceleration generated by the grade of the slope. • Increased Payloads Through body design optimization, the HM300-3 features increased body capacity and payload. The low 9 ft. 2 in. (2.8 m) loading height easily matches with 30- to 60-ton (27 to 54 t) hydraulic excavators or 5 to 7.5 cu. yds. (3.8 to 5.7 cu m) wheel loaders. In addition, the two single-staged body lift cylinders provide a 70-degee dump angle. • Enhanced Operator Environment The new cab design provides a comfortable and quiet work environment so operators can maximize their productivity. The ROPS/FOPS Level 2 certified cab features a new rounded front dash panel with easy to reach switches. The dashboard has been redesigned and relocation of the high back, heated air ride seat with point seat belt improves operator visibility. An auxiliary input also has been added to con-

nect an MP3 player or other device along with two 12-volt ports that have also been incorporated into the cab. A new high resolution 7 in. LCD monitor features enhanced capabilities and displays information in 25 languages for global support. Using the monitor, the operator can easily modify settings for items such as the auto idle shutdown or the auto-reversing fan; check operational records, such as driving history or fuel consumption; monitor the KDPF or check how much time is required before the next maintenance interval. The monitor also offers the operator the option of using the ECO guidance function, which will provide operational tips to reduce fuel consumption. A separate high resolution back-up camera is standard with every machine and is mounted on the right hand side of the console for operator convenience. • Convenient Maintenance and Serviceability The HM300-3 provides easy service access to reduce costly downtime. The new model features a newly designed engine hood for easy access, increased cooling capacity, and a standard hydraulically driven auto-reversing fan to help keep the radiator and charge air cooler clean. The machine is equipped with the Komatsu EMMS (equipment management monitoring system), which has enhanced diagnostic features that give the operator and technicians greater monitoring and troubleshooting capabilities. EMMS also continuously monitors all critical systems, preventative maintenance, and provides troubleshooting assistance to minimize diagnosis and repair time. For more information, visit www.komatsuamerica.com.

Page 34 • May 21, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

DuraClass Unveils New Sidewinder Jr. Dump Body DuraClass recently introduced the Sidewinder Jr. dump body for standard dump use, as well as winter snow and ice control. The 3 to 4 yd. (2.7 to 3.6 m) Sidewinder Jr. is designed for medium duty truck applications and complements the larger 5 to 14 yd. (4.6 to 12.8 m) capacity DuraClass Sidewinder dump body. With its compact size, the Sidewinder Jr. increases maneuverability on narrow roads and in metropolitan areas, while minimizing clearance concerns, according to the manufacturer. The versatile body is easily prepared for unexpected early or late snowfalls and can be used for mid-winter construction events, such as water main breaks, without having to remove sanding equipment. The Sidewinder Jr. delivers salt/sand to the front of the truck’s tires through a conveyor system, providing added traction for traveling up and down hilly terrain. The unit’s low profile allows for safe traveling in minimum clearance areas such as under power lines, areas with low tree branches or under bridges. DuraClass designs and manufactures a wide range of premium Class 3 to 8 dump bodies, hoists and related equip- The Sidewinder Jr. delivers salt/sand to the front of the truck’s tires through a conveyor system, providing added traction for traveling up and down hilly terrain. ment.

Construction Equipment Guide â&#x20AC;¢ Trucks & Trailers Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ May 21, 2011 â&#x20AC;¢ Page 35

WITH LANDOLLâ&#x20AC;&#x2122;S HIGH END FEATURES 6WHHO 6KRW %ODVWHG Â&#x2021; 3RZGHU &RDW 3DLQW Â&#x2021; <HDU 6WUXFWXUDO :DUUDQW\ *URWH +DUQHVV /(' /LJKWV <HDU :DUUDQW\ Â&#x2021; &HQWUDO *UHDVH 6\VWHP

'HWDFKDEOH H *RRVHQHFN 7R 7RQ $[OH 7R 7RQ $[OH

0RGHO

ORZER\ WUDLOHUV 7KH 6HULHV KDV WWZ ZR SULPDUU\\ PRGHOV 7KH LV D WRQ ZLWK WWZ ZR RU WKUHH D[OHV WKH LV D WRQ ZLWK WKUHH RU IRXU D[OHV 'HFN KHLJKWV GRZQ WR Â´ DQG GHFN OHQJWKV XS WR Â¶ JLYH WRGD\Â¶V KDXOHU WWZ ZR DOO LPSRUUWWDQW IHDWXUHV 7KH VHULHV KDXOV WKDW WDOOHU ZLGHU KHDYLHU ORDG ZLWK HDVH <HV ORZHU \RXU ERRP EXFNHW RU FDE <HV ORZHU \RXU ERRP EXFNHW RU FDE 7DNH D VHULRXV ORRN DQG \RX ZLOO Â¿QG KLJK TXDOLW\ FUDIIWWVPDQVKLS ZLWK D SURGXFW WKDW LV ORDGHG ZLWK VWDQGDUG IHDWXUHV %XLOW ZLWK \HDUV RI PDQXIDFWXULQJ H[SHULHQFH WKH 'HWDFK 6HULHV LV EDFNHG E\ D Â¿YH \HDU IDFWRUU\ \ ZDUUDQW\ SDFNDJH &$// 72'$<Â«

Â&#x2021; Z Â&#x2021; ZZ Z Z OD ODQGR QGROOO F O F RP

Page 36 • May 21, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

2850 El Centro Road Sacramento, CA 95833 916-922-7181 800-227-3399 Fax: 916-922-4532

460 N. Danebo Ave. Eugene, OR 97402 541-484-5424 800-443-5452

1425 NE Columbia Blvd. Portland, OR 97211 503-289-1103 800-452-5346 Fax: 503-283-4549

3607 20th Street East Tacoma, WA 98424 253-922-8718 800-621-7636

19808 West Valley Highway Kent, WA 98032 800-523-4148 206-575-0140

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 37

B C usiness

The AGC of ST. Louis is excited to announce a new award to recognize excellence among the Specialty Contractor members of the AGC of St. Louis. Through a secret ballot process, AGC General Contractors will vote for FIRST PLACE specialty contractor in ten separate categories: Concrete/Paving Earthwork & Utilities Electrical Environmental Remediation & Demolition Finishes, Openings & Fixtures Masonry Mechanical Structural & Finish Carpentry Structural & Finish Metals Thermal & Moisture Protection

Each first place contractor will be recognized with a FIRST PLACE award in the specified category. The Specialty Contractor receiving the highest number of votes overall will also be awarded the distinction of Specialty Contractor of the Year by the AGC of St. Louis. This award allows the General Contractors to publicly acknowledge those best practices. To be eligible, a Specialty Contractor must be a member of the AGC of St. Louis. The Specialty Contractor award recipients will be named and presented their awards at the AGC of St. Louis Awards Gala featuring the Keystone Awards & the Specialty Contractor of the Year on Thursday, November 3, 2011 at the Millennium Hotel in downtown St. Louis. You won’t want to miss this event as we name the first Specialty Contractor of the Year! AGC of ST. LOUIS…The Keystone Awards Call for Entries is Coming!!! The Keystone Awards are approaching quickly! Be on the lookout for the Keystone Awards Call for Entries flyer, and start thinking about which projects you are going to submit in this year’s program! AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC. *** AGC of St. Louis Early Bird Sponsorships Now Available for the 2011 Spring Sporting Clays Tournament!!! ACT FAST!!! The costs of 2011 sponsorships have been REDUCED by $50! Sponsorship opportunities will be available after the March 25th deadline, but not at the discounted rates that are available to the early birds! Contact AGC St. Louis office for more details! July 18-20, 2011 – Workshop. Illinois Association of Aggregate Producers (IAAP) Illinois Teachers Workshop: Teachers from your community should register. The IAAP’s Public Information and Education Committee will hold its 15th annual Illinois Teachers Workshop: Rocks, Minerals & Mining in Today’s Society at Lewis University in Romeoville, Illinois on July 18 to 20, 2011. This workshop is proving to be very popular. Teachers have begun registering and we are now 1/3 of the way to our capacity of 35 teachers. The goal of this workshop is to inform teachers in grades K12 about the importance of rocks, minerals, and mining in everyday life. Questions? Please call, Shawn McKinney, Outreach Manager, IAAP, 1115 S. 2nd Street, Springfield, IL at 217-241-1639. AED Dealer Executive Events Associated Equipment Distributors (AED) is pleased to announce several events and programs tailored specifically for dealership principals and senior management. AED’s CFO Conference: Financial Issues for Distribution CFOs and CEOs May 24-25, 2011, Oak Brook, Illinois Repeated October 20-21, 2011

alendar

Join the financial powerhouses of the industry for an in-depth examination of the accounting and tax issues, financial strategies, and profit opportunities for the equipment distributor. The CFO Conference is your chance to meet with financial experts and peers for frank discussions, thorough analysis, and an insider’s perspective on the current year and what lies ahead. The AED CFO Conference is designed specifically for CFOs, CEOs, COOs, as well as other key executives with financial responsibilities. All attendees will enjoy a blended program of seminars and workshops with an emphasis on hands-on learning, group discussion and Q&A forums. AGA of St. Louis Events! IT’S ALMOST TIME FOR THE CLC ANNUAL BUILD-A-BRAT PICNIC!!! Save the Date : The CLC Annual BUILD-ABRAT Picnic will be held on THURSDAY, JUNE 9, 2011 at Tillis Park, St. Louis. There will be beer, brats and a band! DETAILS TO FOLLOW! IT’S RED BIRD SEASON IN THE NEW STADIUM!!! 2011 St. Louis CARDINALS Tickets are now available! The AGC of St. Louis has a luxury suite this season at Busch Stadium. The 2011 price for a single game is $1,900. Three game packages are available for $5,700, and five game packages are priced at $9,500. All food and beverages costs are in addition to these fees. You may reserve your choice of game packages by listing the package number and emailing information to dpigg@agcstl.org. Reservations will be held in the order your request is received. The game dates are firm, however, the Cardinals say that some game times may be changed to accommodate national television. If you have questions, please call Donna M. Pigg, Administrative Accountant, at 314-781-2356 extension 108. AED Executive Forum September 8-9, 2011, Rosemont, Illinois This two-day event will combine information on the trends and issues that are shaping the future of equipment distribution with an opportunity to network with senior-level industry executives. An impressive group of leaders will share their insights and perspectives and challenge you with new answers to old problems. Successful 2010 Build St. Louis Expo. The Build St. Louis Expo was a great success! The aisles were full of representatives from all facets of the industry. All of the booths were sold, so attendees had some great new specialty contractors to meet and view new products on the market by the suppliers. The expo gave another meaning to the words “social networking” and actually shaking hands. Our appreciation to our industry participants – St. Louis Council or Construction Consumers, AIA St. Louis, St. Louis Minority Business Council and Contractors Assistance Program who helped promote the event to their members. KEYSTONE AWARDS – IT’S TIME TO SUBMIT YOUR PROJECT! The Keystone Awards are approaching quickly! Start thinking about which projects you are going to submit in this year’s program. Submissions are due June 8th!!! ***SAVE THE DATE of June 7, 2011 for a Seminar on Unfunded Pension Liability The AGC of St. Louis and the AGC of Missouri are planning a Seminar on Unfunded Pension Liability for Tuesday, June 7, 2011 at the Ameristar Hotel and Casino in St. Charles; Breakfast and Registration at 7:30 AM and Seminar starting at 8 AM and concluding by Noon. Final details and advance registration will be available soon. So, please mark this date on your calendar and watch for details.

TOUGH ENOUGH

to handle the ups and downs.

Challenging jobsites don’t intimidate a Doosan® Mox y ar ticulated dump tr uck . It s sloping rear frame, free-swinging rear tandem axle and independent front suspension ensure maximum ground contact, excellent weight distribution and solid footing for a big advantage in difficult terrain. Per manent six-wheel drive delivers outstanding traction to pull you through – so you can make full use of its huge load capacit y. Ever y job has its ups and downs. Doosan Mox y keeps you productive no mat ter what. Contact your local Doosan dealer ffor or more inf nfor ormation.

DOOSAN DELIVERS

Performance

Durability

Comfort

Fuel Efficiency

Easy Maintenance

Doos an ® is a r e gis t e r e d t r a d e m a r k of Doo s a n In f r a c or e Co., L td. in t h e Unit e d S t a t e s. © 2 0 11 Doo s a n In f r a c or e Cons t r u c tion Equip m e n t A m e ric a . A ll righ t s r e s e r v e d. | 0 5112 0 1

Au thor ized Doos an Dealer s

CALIFORNIA C ALIFORNIA Bejac Corporation Placentia Escondido

O KL AHOMA OKLAHOMA H & E Equipment Ser vices Oklahoma Cit y Tulsa

714-528-6224 760-796-6561 800-77 %(-$& ì EHMDF FRP

405-789-7368 918-445-2666 he-equipment.com

TEXAS TE X AS H & V Equipment Ser vices, Inc. Corpus Christi Progreso

UTAH UTAH Mesco, Inc. Nor th Salt Lake

361-241-1000 956-565-3788 ŧŧŧǍŤŨŧǍŤťťŢ ì hvequipment.com

808-936-3890 ŧşşǍŢŨŦǍŠťšŨ ì mescoequipment.com

Page 38 â&#x20AC;¢ May 21, 2011 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

T Top op models models for for great great performance per formance Great performance from Dynapacâ&#x20AC;&#x2122;s rollers and pavers : the CP224, CP224W and CP274. Dynapacâ&#x20AC;&#x2122;s pneumatic tired rollers DUH GHVLJQHG WR HQKDQFH HIÂ¿FLHQF\ VHUYLFHDELOLW\ RSHUDWRU VDIHty and comfort. Exceptional features include a smooth start-stop system when FKDQJLQJ GULYLQJ GLUHFWLRQ ZLGH EDVH WLUHV DLU RQ WKH UXQ DQG D EDFN XS VSULQNOHU V\VWHP Dynapacâ&#x20AC;&#x2122;s new F1000 series wheeled or tracked asphalt pavers KDYH EHHQ GHVLJQHG HVSHFLDOO\ IRU WKH 1RUWK $PHULFDQ PDUNHW 7KH\ KDYH WKH ORZHVW GHFN KHLJKW LQ WKH LQGXVWU\ DQG IHDWXUH 3/4-inch formed KRSSHU ZLQJV WKDW GHOLYHU DVSKDOW WR D KLJK FDSDFLW\ VODW FRQYH\RU $ KLJK SHUIRUPDQFH RXWERDUG DXJHU GULYH DQG WKH FRQYH\RU GHVLJQ eliminates center line segregation. Dynapacâ&#x20AC;&#x2122;s drum rollers KDYH D SHUIHFW YLHZ RI GUXP HGJHV VXUIDFHV DQG VSULQNOHU QR]]OHV (YHQ WKH ODUJHVW PRGHO OHWV WKH RSHUDWRU VHH DQ REMHFWW feet high, at only 3 feet away. :DQW WR NQRZ PRUH" +DYH D FORVHU ORRN DW dynapac.com.

Tom Growney Equipment, Inc.

www.growneyinc.com Hobbs, NM El Paso, TX 2301 Candelaria Road N.E. Farmington, NM Albuquerque, NM 87197 505/326-1101 505/392-6923 915/598-1133 505/884-2900 Fax: 505/884-8790

BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/745-1542

3DUW RI WKH $WODV &RSFR *URXS

www.dynapac.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 39

CLASSIFIEDS

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

NH Construction Equipment New & Used Parts & Service

CRANES Crane Inspections Specializing in Truck Mounted Cranes

Modern Equipment Sales & Rental 800-445-4381

GENERATORS

Modern Equipment Sales & Rental 800/445-4381

Generators & Gen Sets

CRAWLER TRACTORS Crawler Tractor 2007 John Deere 450J, LGP, ROPS, hydro trans., 124'' 6way blade, very good condition, 1072 hours ................$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128'' screen and sweeps, good condition, 1806.................$57,800. Industrial Tractor Co. Inc. 843-572-0400

EXCAVATORS Hydraulic Excavators

For Sale or Rent All Makes and Models Modern Equipment Sales & Rental 800/445-4381

LANDSCAPE EQUIP. Misc. Landscape Equip. Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments! Rent or Purchase Norris Sales Company 610/279-5777

Track Loaders

PARTS

Backhoe Loaders

Crane Parts

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24'' bucket, very good condition, 71 hours..........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24'' BH bucket, very good condition, 55 hours...........................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24'' BH bucket, excellent condition, 38 hours. ....................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24'' BH bucket, excellent condition, 384 hours...........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24'' BH bucket, good condition, 2862 hours.................. $3 9 ,5 00 .

TEREX PARTS

Industrial Tractor Co. Inc. 843-572-0400

Modern Equipment Sales & Rental 800/445-4381

RENTALS Rental Construction & Industrial Equipment Rentals

Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777 Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer Rentals, Sales, Service Mon-Fri 6:30 am - 5:00 pm Sat 7:00 am - 12:30 pm

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

Norris Sales Company 610/279-5777

TRAINING

Construction & Equpment & Supplies for the "Professionals"

Operator Training

Daily - Weekly - Monthly & Long Term Rentals Available

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

TRUCKS Bucket Trucks ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Classified...2 Insertions...95¢ Per Word Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

Each

Block The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Classified Rates: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction equipment Guide. CArD mEmBEr’S nAmE _________________________________________________CompAnY nAmE ___________________________________________________

2011 EZ Screen 550, Works with 1 Yard Loader or 96” Bucket, Excellent 5’x4’ Vibratory Screenbox! Ideal for site cleanups. One man = 50 yards a day+. Talk to the folks that own them. 2 Year warranty. This will be the fastest payback of ANY machine you’ve ever bought. . . . . . . . . . . . . . . . . . . . . . NEW $9,500 plus freight. Other Screens Available www.ez-screen.com • 866-745-5828 11 EB

Gomaco Commander III, GT 6300, 4,474 hrs, 154 hp. Cummins, 4’ extended conveyor belt, 42” legs, excellent condition ..........................................................$142,500 John Gonzales 719/948-1800 or ggg4351@aol.com

10-11 DA

STrEET______________________________________________________________________phonE no. _________________________________________________ CiTY _______________________________________________________________________STATE ___________________________ zip __________________________ Check Enclosed

ViSA

mASTErCArD

AmEriCAn ExprESS Exp. DATE

CArD numBEr

SiGnATurE of AuThorizED CArDholDEr

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 maryland Drive • fort Washington, pA 19034 Email: sales@cegltd.com

Ingersoll Rand ECM 350 Drill, s/n H280014, Good Condition with VL140 Drifter ............................$25,000 512-255-6929 • david@erfurblasting.com

11 DA

1997 Ingersoll Rand ECM 690 Drill, s/n C15006BR, 8500 Hrs, Good Condition with Freshly Sealed Drifter, Water Injection, Rod Changer, Cat 3306, 420 CFM Air Compressor, Cab and Working A/C- ................$85,000 512-255-6929 • david@erfurblasting.com

11 DA

Page 40 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. JCB 5508, 550 (140170) | WE URGENTLY WANT TO BUY FROM USA CONTRACTORS/DEALER WHOLESALERS. CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– CF (WOODS) QUICK COUPLER | MUST HAVE 80 MM PINS 12-12 1/4 BETWEEN EARS CAN BE BETWEEN 17 3/4 AND 18 INCHES CENTER TO CENTER OF PINS CONTACT: TOM SCHIMELFENIG PHONE: 701.984.2522 FAX: 701.984.2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– ANY CONDITION-NEEDED FOR PARTS NPK E 218 HYDRAULIC HAMMER CONTACT: PHIL PHONE: 413-427-7171 EMAIL: PHILG123@COMCAST.NET –––––––––––––––––––––––––––––––– HITACHI ZX 270 | 2004-2006 YEAR, CLEAN WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 4X4 SINGLE AXLE CAB CHAS | LIKE A INTERNATIONAL 4300 DT466 WILL LENGTH TO FIT CONTACT: RALPH PHONE: 580-591-3922 FAX: 580-536-2355 EMAIL: RDICKSON2@GMAIL.COM –––––––––––––––––––––––––––––––– TIRE HANDLER | TIRE HANDLER FOR 773 & 637 TIRES CONTACT: TOM WEAVER PHONE: 540-389-7002 FAX: 540-389-7072 EMAIL: TWEAVER@PARADIGMINTL.COM –––––––––––––––––––––––––––––––– INSULATION BLOWER USED GOOD QUALITY | ALSO NEED 7X12 CARGO TRAILER FOR INSULATION BLOWER CONTACT: TONY PHONE: 727-459-3935 EMAIL: TONYSABELLICHI@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER SPECIALITE D8 WITH RIPPER 1977 AT 2011 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CF PINGRABBER QUICK COUPLER | MUST HAVE 80 MM PINS APPROX. 17 3/4 CENTER TO CENTER 12 INCHES BETWEEN EARS PREFER MECHANICAL BUT WILL CONSIDER HYDRAULIC CONTACT: TOM SCHIMELFENIG PHONE: 701-984-2522 FAX: 701-984-2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– BULLDOZER D7G AND D7H WITH RIPPER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– WILLARD | KOMATSU EXCAVATOR, 50,000 APPROX WEIGHT. $50,000 OR UNDER. WITH HEAT/AIR/THUMB. CONTACT: FROM MISSOURI PHONE: 660-484-3522 OR 660-542-4454 FAX: 660-484-3722 EMAIL: WKWOOD@GREENHILLS.NET ––––––––––––––––––––––––––––––––

TRIPLE L TRAILER | TRAILER THAT THE DECK LOWERS TO THE GROUND PREFERABLY A 7612 DROP DECK SCISSOR LIFT TRAILER CONTACT: DAN MCKINNEY EMAIL: DANO@COOPSONE.COM –––––––––––––––––––––––––––––––– RUBER TIRE TRACTOR BACKHOE | JD OR CASE GOOD SHAPE 10 TO 12 REACH CONTACT: RICH PHONE: 507-847-3266 507-840-0838 EMAIL: RICHLIN507@MSN.COM –––––––––––––––––––––––––––––––– CRAWLER CRANE | WANT TO BUY. AMERICAN 9310 CRAWLER. CONTACT: DON AUSTIN PHONE: 512-750-9742 FAX: 512-301-0163 EMAIL: MACHINERYPICTURE@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR 980G | YEAR 2000 +/CLEAN WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– JCB 550, 550140, 550170,1998, 2007 | WE ALWAYS BUY THESE UNITS. PLEASE SEND IF YOU HAVE. THANKS CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– 5000 POUND FORKLIFT/AIR TIRES | LOOKING FOR AN OFF SOLID SURFACE TIRED 5000 POUND FORKLIFT. PREFER GAS ENGINE CONTACT: JOE HOTZE PHONE: 618-548-1711 FAX: 618-548-6753 EMAIL: JOEHOTZE@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED TO BUY JCB TELEHANDLERS & CATERPILLAR WHEELLOADERS | OFFER ME THE FOLLOWING EQUIPMENTS.JCB TELEHANDLERS 550140/170.CATERPILLAR WHEEL LOADERS 950B,950E,966D,966E.966F. CONTACT: HIDAYAT KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED TO BUY HITACHI EXCAVATORS EX200,UH083,UH077 | OFFER ME THE FOLLOWING HITACHI EXCAVATORS EX200-1,EX200LC-1,UH083,UH077. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– 1986 1990 KAWASAKI WHEEL LOADERS | LOOKING TO PURCHASE ANY KAWASAKI WHEEL LOADER RANGING YEAR 1986 - 1990. CONTACT: ALI HUSSAIN PHONE: 314-537-2809 EMAIL: ABUMUJTABA1963@ YAHOO.COM –––––––––––––––––––––––––––––––– CAB FOR CAT 420D | OPEN ROPS CAB FOR CAT 420D CONTACT: JENNIFER PHONE: 256-533-1100 FAX: 256-533-1191 EMAIL: JENNIFER@ DONKENNEDYANDSONS.COM ––––––––––––––––––––––––––––––––

MT6642, MLT627 | WE ARE INTERESTED TO BUY URGENTLY THESE UNITS AT COMPETITIVE PRICES.THANKS CONTACT: AYYAZ ALLAM EMAIL: AUTOLINKINTERNATIONAL@ GMAIL.COM –––––––––––––––––––––––––––––––– JRB STYLE QUICK COUPLER TO FIT 544E LOADER | LOOKING FOR A COMPLETE HYDRAULIC QUICK COUPLER TO RETRO FIT ON A JD 544-E LOADER. USED IS PREFFERED CONTACT: JOHN NYE EMAIL: NYEPARENTS@YAHOO.COM –––––––––––––––––––––––––––––––– JCB550 OR 550140 (1997-2003), SAKAI T2, BOMAG 161 & 165 AD | WE NEED THE ABOVE MENTION EQUIPMENT ONLY FROM USA-CANADA-JAPAN & EUROPE.THANKS CONTACT: AYYAZ ALLAM EMAIL: AUTOLINKPK@GMAIL.COM –––––––––––––––––––––––––––––––– HORIZONTAL BORING MACHINE CONTACT: MARSHALL CONSTRUCTION CO. INC. PHONE: (434) 793-2715 FAX: (434) 793-2803 EMAIL: TPRESSLEY62@YAHOO.COM –––––––––––––––––––––––––––––––– USED #325 CAT DOORS, RIGHT HAND DOOR PART # 1776075; LEFT HAND DOOR PART # 1849022. DOORS NEED TO HAVE DECALS. CONTACT: MEMPHIS WRECKING COMPANY PHONE: 901-774-4011 FAX: 901-946-9793 EMAIL: MEMWRECK@AOL.COM –––––––––––––––––––––––––––––––– SEND US A QUOTE, CATALOGUE AND NECESSARY DETAIL FOR THE SUPPLY OF THE BELOW MENTIONED. 1. PEDESTRIAN TRENCHER - EQUIVALENT TO DITCH WITCH RT-24 WALK-BEHIND TRENCHER PRODUCT NEEDS A 36" BOOM AND A 100% BOLT-ON SHARKTOOTH CHAIN AND TRENCH CLEANER 2. TRAILER - EQUIVALENT TO DITCH WITCH TRAILER S1-A. CONTACT: PRASHANTH PHONE: 00968-92807072 FAX: 00968-23279065 EMAIL: ABUGHAZLAN@YAHOO.COM –––––––––––––––––––––––––––––––– SOLAR 130(EXCAVTORS)19905 • WE ARE INTRESTED IN BUYING SOLAR 130(WHEEL EXCAVATORS)1990-5 FROM SOUTH KOREA AND ALSO INTRESTED USED MOTOR GRADER CONTACT: AGHA WAQAR ALI KHAN PHONE: 92-300-4642935 FAX: 92-42-35942188 EMAIL: BDIL6@YAHOO.COM –––––––––––––––––––––––––––––––– KOMATSU MODEL PC20-7 SER#38938 CONTACT: F.MULTARI FAX: 845-586-3854 EMAIL: CAROL.MULTARI@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY FROM USER D6H D6R D7G D7H D8K D8N WITH RIPPER OR WINCH USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

NEED HITACHI EXCAVATOR EX200,EX200LC • WE NEED HITACHI EXCAVATORS EX200, EX200LC, YEARS FROM 1987 TO 1990, OFFER ME. CONTACT: NAQIB KHAN PHONE: +92-345-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– CAT IT QUICK COUPLERS CONTACT: EVIE PHONE: 603-899-2000 FAX: 603-899-2006 EMAIL: EVIE@202TRUCK.COM –––––––––––––––––––––––––––––––– BOBCAT SKID LOADER INQUIRY | WE ARE LOOKING FOR BOBCAT S130. WE WANT TO BUY 4 UNIT SKID LOADER. CONTACT: MAX PHONE: +886 2 22767678 FAX: +886 2 22767679 EMAIL: MAXMOUT@CATLON.COM.TW –––––––––––––––––––––––––––––––– EXCAVATORS • DEERE/HITACHI 650DLC [17FT ARM] OR KOMATSU PC750-7 [18 FT ARM] WITH LOW HOURS. CONTACT: DALE WITCHER PHONE: 803 376 6040 EMAIL: DWITCHER@SC.RR.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW | 3 UNITS GOOD CONDITION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– KOMATSU TRACK EXCAVATOR | 19972002 KOMATSU PC300LC-6 & PC400LC6: (12,000 HRS WORKING OR LESS) (KOMATSU ENGINE, ORIGINAL PAINT, ORIGINAL PUMP) MACHINE HAS TO BE WHOLE SALE PRICE AND COME FROM CONTRACTOR OR END USERS. CONTACT: DAVID | PHONE: 626-417-9808 | EMAIL: VPINTERNATIONALTRADINGCO@GMAIL.COM –––––––––––––––––––––––––––––––– NEED TO BUY FROM USER BULLDOZER D3 A D10 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES • CASE 580-E K L SL M & SMS CONTACT: FRANK @ TRICO EQUIPMENT PHONE: 800-654-USED (8733) EXT. 1230 FAX: 856-697-4842 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– PORTABLE JAW CRUSHER 36/48 OR 40/48 • GOOD CONDITION WORK READY CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– CAT 966C | NEED 966C UNIT READY TO WORK TO BE SHIP OVERSEAS. CONTACT: OSAMA ABBAS EMAIL: ABBASOSAMA@HOTMAIL.COM ––––––––––––––––––––––––––––––––

9FT11IN STICK FOR CAT 345 BL CONTACT: MATT BUSH THERUHLIN COMPANY PHONE: 330-239-2800 FAX: 330-239-1845 EMAIL: MBUSH@RUHLIN.COM –––––––––––––––––––––––––––––––– BARNES 30MU PUMP BODY • PUMP BODY OR COMPLETE UNIT CONTACT: RICHIE EMAIL: RFH3@CITLINK.NET –––––––––––––––––––––––––––––––– WE NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, IF YOU HAVE ANY AVAILABLE UNIT FOR SALE, PLEASE INFORM ME. CONTACT: HIDAYAT KHAN PHONE: 345-881-8803 EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC CA251D,CA251PD | WE NEED TO BUY DYNAPAC ROLLERS / PACKERS CA251D & CA251PD, IF AVAILABLE FOR SALE PLEASE INFORM ME. CONTACT: NAQIB KHAN PHONE: 333-329-8751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– SKID STEER | TIME TO UPDATE MY 1840 I WANT SOMETHING WITH AUG.HYD.WITH 50+HP CONTACT: ERIC PHONE: 847 909 7845 EMAIL: ECA567@ATT.NET –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER D11N OR D11R WITH RIPPER RUN FOR THE PRICE I PAY UNDER UNDER 100,000 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– KOMATSU WA 200 2005/ OR NEWER | AIR CAB, COUPLER A PLUS, JOB READY 2000 HOURS +/CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– VALMET | I AM LOOKING FOR PARTS TO FIT A VALMET 342 WHEEL LOADER, SPECIFICALLY SOME WORKING BRAKE CYLINDERS /ACTUATOR FRONT AND OR REAR. CONTACT: MICHAEL MALONEY EMAIL: MICHAELMALONEY@ATT.NET –––––––––––––––––––––––––––––––– A JOB TRAILER, OFFICE TRAILER CONTACT: EZRA MARTIN PHONE: 717-615-8315 FAX: 717-445-4468 EMAIL: EZRAMARTIN@EMYPEOPLE.NET –––––––––––––––––––––––––––––––– LORAIN MC7120 BOOM SECTIONS | D17 65" X 65" SQUARE BOOMS - NEED ONE 20 SECTION- NEED ONE 30 SECTION. NEW ENGLAND/NEW YORK TRISTATE. CONTACT: CAROL NIELSON PHONE: 203-380-8300 FAX: 203-380-8944 EMAIL: CNIELSON@DEMOLITIONSERVICES.COM ––––––––––––––––––––––––––––––––

VOLVO EC35 | CAB / AC CONTACT: MICK PHONE: 352-527-0072 EMAIL: INFO@FIELDCO.BIZ –––––––––––––––––––––––––––––––– MIXER MACHINE WITH LIFT CONTACT: AJAYAN PHONE: 944-666-3808 EMAIL: AJAYANVASTHU@GMAIL.COM –––––––––––––––––––––––––––––––– EXCAVATOR CAT330BL | PLEASE AM LOOKING FOR EXCAVATOR 330BL USED MACHINE HOURS NOT MORE THAN 6000HRS. CONTACT: ROCKIAH.ENTERPRISE EMAIL: WAJESTO@YAHOO.COM –––––––––––––––––––––––––––––––– EXCAVATOR COUPLER | EXCAVATOR COUPLER TO FIT JOHN DEERE 790E CONTACT: BOB MILLER PHONE: 641-982-4907 FAX: 641-982-4907 EMAIL: RJMILLER@OMNITELCOM.COM –––––––––––––––––––––––––––––––– COLD PLANER /MILL /GRINDER | LOOKING FOR 18" OR 24" HIGH FLOW ATTACHMENT FOR SKID STEER CONTACT: JAMES MANN PHONE: 1-404-273-9424 FAX: 1-770-306-2962 EMAIL: JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– NEED TO BUY D7G AND D8K WITH RIPPER USER FAST STRAIGHT BLADE USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CLARK RANGER 667 WINCH TYPE SKIDDER • GOOD CONDITION OLDER SKIDDER CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 7800 7810 GEHL OR 2109 MUSTANG • FOOT CONTROLS CAB WITH HEAT AIR!!!! LESS THAN 2000 HRS 20000 OR LESS FOOT CONTROLS CAB HEAT HIGH FLOW??? UNDER 2000 HRS 20000 OR LESS CONTACT: GIL SODAWASSER PHONE: 701 320 0259 EMAIL: GSPLAYME@GMAIL.COM –––––––––––––––––––––––––––––––– D6H DOZER CONTACT: ARDONNA WEAVER PHONE: 574-536-0763 FAX: 574-831-2914 EMAIL: AWEAVER@ BEERANDSLABAUGH.COM –––––––––––––––––––––––––––––––– CAT 3408 ENGINE CONTACT: WILLIE PHONE: 201-786-3354 FAX: 201-444-6377 EMAIL: WKIRCH@OPTONLINE.NET –––––––––––––––––––––––––––––––– TAKEUCHI EXCAVATORS TRACK LOADERS • I BUY TAKEUCHI TRACK LOADERS AND EXCAVATORS ALL CONTACT: PAUL MADSEN PHONE: 407-468-1070 FAX: 321-445-9851 EMAIL: CFLRESALE@GMAIL.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 41

Online A Auctions uctions June 2011

JUNE 2 Constr Construction uction

JUNE 15 Motors

JUNE 23 Construction Constr uction

JUNE 8 Constr Construction uction and Agr Agriculture iculture

JUNE 9 Constr Construction uction

JUNE 16 Construction Constr uction

JUNE 22 Construction Constr uction

JUNE 24 Agriculture Agr iculture

JUNE 30 Construction Constr uction

Inspected and Guaranteed www.ironplanet.com s 888-433-5426 Go to www www.ironplanet.com .ironplanet.com to see the auctions.

Page 42 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• Racine, WI Fri., June 3, 2011 For: Complete Liquidation of Major Rental Company

• Sacramento, CA May 24, 2011

• Albany, NY Sat., June 4, 2011 For: Construction Equipment, Trucks and Shop Equipment • Manassas, VA Wed., June 8, 2011 For: Job Completion of Late Model Construction, Support Equipment, Trucks & Trailers • Albany, NY Sat., June 11, 2011 For: Construction, Support, Aggregate Equipment, Dump Trucks • Detroit, MI Sat.-Sun., June 11-12, 2011 For: Construction Equipment, Trucks, Trailers, Support and Attachments • Tampa, FL Wed., June 15, 2011 For: Secured Creditors Auction • Uniontown, PA Fri., June 17, 2011 For: Secured Creditors Auction • Strong, ME Wed., June 21, 2011 For: Late Model Sawmill, Rolling Stock and Sawmill Equipment • Atlantic City, NJ Sat.-Sun., June 18-19, 2011 For: Heavy Construction Equipment, Forklifts, Aerials, Trucks & Trailers, Attachments, Building Supplies • Houston, TX Wed., June 21, 2011 For: Large Job Completion Auction of Construction Equipment • Racine, WI Wed., June 22, 2011 For: Construction Equipment, Trucks and Trailers • Queratero, Mexico Fri., June 24, 2011 For: Late Model Construction Equipment, Attachments, Trucks and Trailers • Buffalo, NY Sat., June 25, 2011 For: Late Model Rental Returns of Primarily New Holland, Construction Equipment, Attachments, Trucks & Trailers • Canastota, NY Sat., July 16, 2011 For: Lyon’s Annual Summer Hay Camp & Friday Night BBQ. Late Model Construction, Support, Aerial Lifts, Trucks and Trailers • Rochester, NY DATE TBA For: Late Model Dump Trucks, Truck Tractors, Equipment Trailers, Construction Equipment, Aerials & Forklifts • Ledyard, CT (Foxwood Casino) DATE TBA For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers

• Madison, WI May 24, 2011 • Williamsburg, VA May 25, 2011 • Chicago, IL May 26, 2011 • Nashville, TN June 2, 2011 • Morrilton, AR June 3, 2011 • Denver, CO June 7, 2011

Coming Auctions INTERNATIO NA L • Meppen, Germany May 26, 2011 • Ocana, Spain June 2-3, 2011 • Avignon, France June 9, 2011 • Polotitlan, Mexico June 9, 2011 • Panama City, Panama June 17, 2011 • Brisbane, Australia June 21, 2011

• Los Angeles, CA Wed., July 20, 2011 For: Construction Equipment

IRAY AUCTIONS www.iraymn.com 320-968-7230

• Omaha, NE Wed., July 27, 2011 For: Construction Equipment

• Foley, MN Fri., June 3rd

• Seattle, WA Wed., August 3, 2011 For: Construction Equipment • Grand Rapids, MI Wed., August 17, 2011 For: Construction Equipment

• Northeast, MD June 7, 2011

• Geelong, Australia June 23, 2011

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087

• Reno, NV June 9, 2011

• Moerdijk, Netherlands June 23-24, 2011

• Prospect, CT Sat., June 25, 2011

• Atlanta, GA June 9, 2011

• Moncofa, Spain June 30 – Jul 1, 2011

• Las Vegas, NV June 10, 2011 • Kansas City, MO June 15, 2011 • Olympia, WA June 16, 2011 • Minneapolis, MN June 17, 2011 • Houston, TX June 22-23, 2011

• Cancun, Mexico July 7, 2011 • Dubai, UAE July 19-20, 2011 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., June 11, 2011 For: Construction Equipment

• Columbus, OH June 23, 2011

• San Bernardino, CA Sat., June 25, 2011 For: Construction Equipment

• Albuquerque, NM June 24, 2011

• Sacramento, CA Sat., July 9, 2011 For: Construction Equipment

• Pittsburgh, PA June 27, 2011 • Phoenix, AZ June 28, 2011 • Jackson, MS June 29, 2011

• San Bernardino, CA Fri., July 22, 2011 For: Construction Equipment • Sacramento, CA Sat., August 13, 2011 For: Construction Equipment

• Salt Lake City, UT June 29, 2011

• San Bernardino, CA Sat., August 27, 2011 For: Construction Equipment

• Statesville, NC June 30, 2011

• Sacramento, CA Sat., September 10, 2011 For: Construction Equipment

• St. Louis, MO June 30, 2011 • Spokane, WA June 30, 2011 • New Orleans, LA July 15, 2011 • Frederick, MD July 19, 2011

• San Bernardino, CA Fri., September 23, 2011 For: Construction Equipment • Sacramento, CA Sat., October 8, 2011 For: Construction Equipment • San Bernardino, CA Sat., October 22, 2011 For: Construction Equipment

• Lo Angeles, CA July 22, 2011

• Sacramento, CA Sat., November 12, 2011 For: Construction Equipment

CA NA DA

• San Bernardino, CA Thurs., November 17, 2011 For: Construction Equipment

• Chilliwack, BC May 25, 2011 • London, ON June 8, 2011 • Edmonton, AB June 15-16, 2011 • Saskatoon, SK June 23, 2011 • Toronto, ON June 28, 2011 • Grand Prairie, AB June 29-30, 2011 • Regina, SK July 31, 2011

• Sacramento, CA Sat., December 10, 2011 For: Construction Equipment • San Bernardino, CA Fri., December 16, 2011 For: Construction Equipment CAT AUCTION SERVICES www.catauctions.com 866-750-9432

• Prospect, CT Sat., August 20, 2011 • Prospect, CT Sat., October 15, 2011 • Prospect, CT Sat., December 10, 2011 DEANCO AUCTIONS www.deancoauction.com 601-656-9768 • Philadelphia, MS Wed.-Thurs., May 25-26, 2011 For: Huge 2 Day Contractors’ Auction G.W. McGREW AUCTION COMPANY www.mcgrewequipment.com 717-428-0922 • Seven Valleys, PA Mon, June 13, 2011 – 10AM For: Construction and Farm Equipment • ONLINE ONLY Wed, June 17, 2011 – 10AM For: Construction and Farm Equipment HANSEN AND YOUNG www.hansenandyoung.com 715-837-1015 • ONLINE ONLY Ends Mon., May 23, 2011 For: Construction Equipment HILCO INDUSTRIAL, LLC www.hilcoind.com 847-313-4747

• Portage, WI Fri., July 15, 2011 • ONLINE ONLY Fri., August 5, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., August 19, 2011 • Foley, MN Fri., September 16, 2011 • Portage, WI Fri., October 14, 2011 • ONLINE ONLY Fri., November 4, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., November 18, 2011 • Foley, MN Fri., December 2, 2011 IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Wed., May 25, 2011 For: Construction Equipment • Thurs., May 26, 2011 For: Construction Equipment • Wed., June 1, 2011 For: Construction Equipment • Thurs., June 2, 2011 For: Construction Equipment • Wed., June 8, 2011 For: Construction Equipment • Thurs., June 9, 2011 For: Construction Equipment • Wed., June 15, 2011 For: Construction Equipment • Thurs., June 16, 2011 For: Construction Equipment • Wed., June 22, 2011 For: Construction Equipment • Thurs., June 23, 2011 For: Construction Equipment • Fri., June 24, 2011 For: Construction Equipment • Thurs., June 30, 2011 For: Construction Equipment

• ONLINE ONLY Thurs.-Wed., May 19-25, 2011 For: Construction Equipment and Bridge Building Equipment

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Kenmore, WA Sat., June 11, 2011 For: Construction Equipment, Trucks, Trailers and Tools

• Farmingdale, NJ Wed., May 25, 2011 For: Construction Equipment and Tool Liquidation

• Lafayette, LA Tues., June 7, 2011 For: Construction Equipment

• New Paltz, NY Sat., June 11, 2011 For: Surplus Construction Equipment from Central Hudson Gas and Electric

• Denver, CO Tues., June 21, 2011 For: Construction Equipment

• Johnstown, PA Thurs., June 16, 2011 For: Construction Equipment

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Wed.-Fri., June 8-10, 2011 For: Construction Equipment • Montgomery, AL Fri.-Sat, June 24-25, 2011 For: Alabama Dept. of Transportation

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Stanley, NC Wed., May 25, 2011 For: One Owner Absolute Auction • Bay Springs, MS Sat, June 4, 2011 For: Farm & Equipment Auction • Rockmart, GA Tues, June 7, 2011 For: One Owner Absolute Auction • Pelzer, SC Fri.-Sat., June 15-16, 2011 For: Annual Summer • Brooklyn, MS Wed.-Thurs, June 17-18, 2011 For: Construction & Farm Equipment, Trucks & Autos • Newberry, SC Wed., August 17, 2011 For: One Owner Absolute Auction

ROGERS REALTY & AUCTION COMPANY www.rogersauctiongroup.com 800-442-7906 • Winston-Salem, NC Thurs., May 26, 2011 For: Construction Equipment

RYAN AUCTION SALES www.ryanauctionsales.com 603-491-6159 • Virtual Equipment and Truck Auction Thurs., May 26, 2011- 10AM • Virtual Equipment and Truck Auction Tues., June 14, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., June 30, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., July 21, 2011- 10AM

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.co m 860-642-4200

• Virtual Equipment and Truck Auction Thurs., August 18, 201110AM

• Islip, NY Fri., June 3, 2011 For: Marine Construction and Excavation Equipment, Trucks and Trailers

• Virtual Equipment and Truck Auction Tues., Sept. 6, 2011-10AM

• Fitzwilliam, NH Fri., June 10, 2011 For: Late Model, Well Maintained Heavy Equipment PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Bidding Starts to Close Wed, May 25 - 10AM For: Cronister and Company Retirement Auction • ONLINE ONLY Bidding Starts to Close Thurs, May 26 - 10AM For: Construction Equipment Auction • ONLINE ONLY Bidding Starts to Close Wed., June 1 - 10AM For: Midwest Construction Auction • ONLINE ONLY Bidding Starts to Close Wed., June 8 - 10AM For: Oklahoma and Texas Equipment Auction • ONLINE ONLY Bidding Starts to Close Tues., June 14 - 10AM For: Government Equipment and Vehicle Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN June 4, 2011 For: Construction Equipment • Pine Knot, KY June18, 2011 For: Construction Equipment • Lebanon, TN September 17, 2011 For: Construction Equipment • Lebanon, TN December 10, 2011 For: Construction Equipment

• Virtual Equipment and Truck Auction Thurs., Sept. 22, 2011-10AM • Virtual Equipment and Truck Auction Tues., October 11, 201110AM • Virtual Equipment and Truck Auction Thurs., October 27, 201110AM • Virtual Equipment and Truck Auction Thurs., Nov. 17, 2011-10AM • Virtual Equipment and Truck Auction Thurs., Dec. 15, 2011-10AM

STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • Alexandria, MN Wed., June 8, 2011 For: Construction Equipment

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 760-731-7760 • Perris, CA Tues.-Wed., June 7-8, 2011 For: Construction Equipment

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Darlington, PA Thurs., May 26, 2011 For: 8th Annual Spring Consignment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 43

Page 44 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ricky Fowler (L) of Fowler Land Management, Lake Dallas, Texas, and Kenneth Gregory, K.L. Gregory & Sons of Nevada, Texas, have been checking the track on this Cat 939 loader.

(L-R): Larry Gardner, Donald Blackburn and James Strain of Bowie County Precient 3, DeKalb, Texas, take a photo op with the Cat 330L.

Vaughan Auction Group Holds Sale in Wills Point

he Vaughan Auction Group held a Spring Contractor’s Public Auction May 5 in Wills Point, Texas . Up for bid were skid steers, excavators and offhighway trucks from manufacturers such as Caterpillar and Case.

Richard Hill of Power Motive Corp., Denver, Colo., made the long trip to take a look at this Komatsu PC 200 LC excavator.

Rod Gatlin of Barr-G Equipment, Longview, Texas, will be bidding on this Cat D6R.

Kenneth (L) and Harley Carter of Harley Carter & Son Truck and Trailer Sales of Valliant, Okla., check out this Cat 250 off-highway truck.

James (L) and Tray Johnson of Johnson Septic Services, Calhoun, La., have a definite interest in this Case 850.

Jim Mauldin, TEXBIZ of Lindale, Texas, is interested in this Case 465 skid steer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 45

LAFAYETTE JUNE 7, 2011

2007 CAT RM300

2005 JOHN DEERE 670DXDW

FOLLOW THE NEW

LEADER

JUNE 7, 2011

9LOCAL A.M TIME

2008 CAT CB534D XW

I-10 // EXIT 109 BREAUX BRIDGE, LOUISIANA 70517

UNRESERVED PUBLIC AUCTION Our auctions offer a wide variety of equipment makes and models, as well as premium services from the Cat name you already know and trust. Search the full equipment listing and register to bid online at:

www.catauctions.com /lafayette Follow the new leader.® www.catauctions.com

CAT AUCTION SERVICES 860 Blue Gentian Road, suite 100 Eagan, MN 55121 855.228.2286 info@catauctions.com

2007 CAT D6NLGP *Equipment subject to change ©2011 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 46 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Del Nevius (L) of North Texas Crane, Lewisville, Texas, and Glenn Behring of Alpha-Omega Equipment Co., Dallas, are discussing this RT 750E mobile crane.

Carlos Toledo of MIS Equipment, McAllen, Texas, thinks he has found the Cat 420E loader/backhoe to bid on.

Cat Auction Services Sale in Dallas a Success

Corky Underwood (L) of RECS/Bayonet Breaker explains the attributes of the Bayonet Breaker Cat 320C combination to Frank Johnson of Frank Johnson Trucking Co., Bowie, Texas.

Pat Waddle of Cross Timbers Equipment, Denton, Texas, may be bidding on this 953C track loader.

at Auction Services held a sale May 10 in Dallas, Rick McKay of R Tex Services, Joshua, Texas, likes the feel of this Xtreme 1245 high-lift telehandler. Texas. The auction featured equipment from Caterpillar, Grove, John Deere and Topcon. Highlights from the sale included a 2008 Grove RT750E rough-terrain crane that sold for $300,000 and a 2007 Cat D6TXW dozer that brought in $225,000.

Jerry Eure of Mustang Engineering, Houston, is about to give this Cat 262B skid steer the “once over.”

Don Larson of Star Tractor, Fort Worth, Texas, takes time for a photo op with a Cat CS563E smooth drum roller.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 47

next public auction thursday :: 06.09.11 8:00 am perris.ca

2021 Goetz Rd., Perris, CA 92570 Preview Dates: Tuesday, June 7th Wednesday, June 8th 7:30 am to 4:30 pm

accepting consignments of heavy construction equipment, trucks & trailers

2000 Link Belt 2650 Quantum Excavator

2004 John Deere 624J Wheel Loader

2004 John Deere 310SG 4x4 Backhoe

sellers:: need cash? ask us about AuctionMax™

866.731.7760

2007 Kenworth T800 Transfer Set

2006 Leeboy 8515 Paver

2006 CAT D4GXL Crawler Tractor

buyers:: register today www.wca-online.com

2006 CAT 301.8C Excavator

2002 Bobcat S185 Skid Steer

2007 Kenworth W900L Truck Tractor

WCA. Real People. Real Results. 2007 Sterling Fuel & Lube Truck

2000 Komatsu WA450 Wheel Loader

Ford Aeromax L9000 2000 Gallon Water Truck

Page 48 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 49

HEAVY HEAV Y EEQUIPMENT QUIPMENT & COMMERCIAL COMMERCIAL TRUCK TRUCK

PPUBLIC PUB UBLI UB LIIC IC A AUC AUCTION U CTION C TI TION

**** 3 AUCTIONS IN ONE DAY! 3 **** SECURED PARTY CRANE

AUCTION **** 3 LARGE JOB COMPLETION AUCTIONS 3 ****

1999 1999 IH T/A T/A FLATBED FLATTBED CRANE CRANE TRUCK TRUCK

2006 CCAT AT 320C 320C LU HYDRAULIC HYDRAULIC EXCAVATOR EXCAVATOR

SACRAMENTO SACRAME SACR SA CRA RAMEENTO ENTTO EN T O , CALIFORNIA C ALIFORNIA A L IFORNIA AL IFO IF FOR ORN RNI NIA IA SATURDAY, SA ATURDA AY, JUNE JUN E 11 TH - 8:30 AM

2006 PETERBILT PETERBILLT 335 S/A S/A MECHANICS MECHANICS TRUCK TRUCK

2006 CATERPILLAR CATERPILLAR 420D 420D LOADER LOADER BACKHOE BACKHOE

B BarNoneAuction arNoneAuction .Com

ONLIN E

4751 4 751 POWER INN INN ROAD ROAD SACRAMENTO, SACRAMENTO, CA 95826 95826 TH TH IN INSPECTION: S P E CTION : JUNE J UN E 9 , 10 - 8 8AM AM TO 5P 5PM M VISIT OUR WEBSITE FOR CURRENT LISTINGS F E AT AT U R E D L O T

“THE “T THE REAL REAL MCCOY” MCCOY” 65’ 65’ VEHICLE VEHICLE FERRY FERRY

BID ON LIN E

ADDITIONAL P PARTS ARTS A AV VAILABLE VISIT WEBSITE FOR DETTAILS AILS

866.372.1700

Putzmeister’s Director of Engineering Earns Award Putzmeister America’s director of engineering, Jim Bury, received ConcretePumping.com’s Lifetime Achievement Award on Jan. 18, 2011, at the World of Concrete in Las Vegas, Nev. Presented to Bury by Todd Bullis of ConcretePumping.com, the award recognizes Bury’s significant achievements in and dedication to the concrete construction industry. “It’s nice to be able to recognize someone who Putzmeister America’s director of engineering, Jim Bury was presented ConcretePumping.com’s Lifetime has done so much and rep- (L), Achievement Award by Todd Bullis. resented us all so well,” said Bullis. “Jim sits on many boards and works exceptionally hard (ACPA), the Concrete Pump Manufacturers at safety, compliance and standards. We Association (CPMA), the American Society want to thank you on behalf of the industry.” of Mechanical Engineers, the Canadian With Putzmeister America since 1998, Standards Association (CSA) and the Bury has been actively involved with vari- American Concrete Institute (ACI). For more information, call 262-886-3200 ous boards and committees including, the American Concrete Pumping Association or visit www.putzmeisteramerica.com.

AllGood Contracting, Jimerson Underground & Deanco Construction TUESDAY, JUNE 21 @ 10:00 AM HOUSTON, TEXAS NOTE: Selling in this sale will be late model cranes from one secured party and 3 major job completions from AllGood Contracting, Jimerson Underground & Deanco Construction. HILITES INCLUDE: 3 TRUCK CRANES: Grove GMK 5150B (150T), P&H T900XL (90T), Terex T560 (60T.), 18 HYDRAULIC EXCAVATORS: (2) 2007-(2) 2004-2003-2002 Komatsu PC300LC-8, 2006 Komatsu PC220LC-7, Komatsu PC220LC-6L, Komatsu PC220LC-5L, Kobelco SK300LC-II, Kobelco SK300LC, Cat 330L, (2) JCB 330LC, 2002 JCB 260LC, JCB 260LC, 2004 JD 200C, Case 9010B, MOTOR GRADERS: 2004 Cat 160H, 11 RUBBER TIRED LOADERS: 2004-(2) 2003 Komatsu WA3203, 2004 Komatsu WA250-5L, (2) Komatsu WA250-3MC, Komatsu WA180-3P5, Cat 950F-II, Cat 936, Kobelco LK550-II, 2003 Case 721C, 12 CRAWLER TRACTORS: 2011 Cat D8T-II (cab, air, rear ripper), Komatsu D65PX-12, (4) 2005-2004-(3) 2003 Komatsu D61PX-15, 2002 Case 750H, Case 750H, 2 CRAWLER LOADERS: 2002 Cat 963C, 18 TRACTOR LOADER BACKHOES: 2008 JD 410J (4X4), 2008 JD 310 SJ (4x4), (2) 2008 JD 310J (4X4), (3) 2005-(6) 2004 JD 310G (4x4), (5) JCB 214S, 2002 JCB 214, ASPHALT PAVERS: Barber Greene SB131, 6 VIBRATORY ROLLERS: 2006 JCB Vibromax VM115PD, IR SD105, IR SD100D, 2004 IR SD77F, IR SD40F, Raygo 320A, 6 RUBBER TRACKED SKID STEERS: (3) 2007-2006 JCB 180T, (2) 2007 JCB 180T (Parts), TRENCHERS: 2005 Ditch Witch RT40, 2 TELESCOPIC FORKLIFTS: Lull 844C-42, JCB 506B, FORKLIFTS: 2004 Hyster S120XMS, 4 BOOM LIFTS: (2) 2007 JLG 600S (4X4), (2) 2007 JLG 450AJ (4X4), 3 AIR COMPRESSORS: (2) IR 185CFM, IR 175CFM, 4 GENERATORS: (2) Demo Cat 500kw, (2) New Makita G12010R 12,000 watts, 3 LIGHT PLANTS: 2005 Magnum MLT4060, Coleman, Allmand LT103, WATER PUMPS: Gorman Rupp 6in. Portable, 5 SWEEPERS: Allmand Maxisweep, (2) Waldon F033, Waldon F026, Waldon F021, FLATBED TRUCKS: 2003 Ford F550XL (s/a), DUMP TRUCKS: 1998 GMC C7500 (s/a), 4 TRUCK TRACTORS: 2007 Peterbilt 359 (t/a), 2007 Peterbilt 359 (t/a), 2007 Freightliner D120064DT (tri.), 2006 Int’l. 7600 (6x4, tri.), 2 PICKUPS: 2004 Ford F250XLT, 2002 Ford F250XLT, BUSES: 1996 Ford E350, AUTOMOBILES: Lincoln Towncar Stretch Limo, 4 DETACHABLE GOOSENECKS: (3) 2011 Witzco 50T (tri.), 2004 Fontaine TA51H (tri.), STEP DECK TRAILERS: Trailmobile (t/a), 2 BELLY DUMP TRAILERS: 2007 Lufkin 26ton (t/a), 2007 CTS 26ton (t/a), 3 PUP TRAILERS: 1997-1995-1994 Clement 2ATT121OL (t/a), UTILITY BODIES: Knapheide 11ft. Utility Body, ATTACHMENTS: Skid Steers: New 2010 Super Cut Asphalt Cutters, Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Versatech Hay Spears, Root & Grapple Buckets, Frames, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets, New 2010 Super Cut Asphalt Cutters, Excavators: 3500-4800-5600 Thumbs, SURVEY EQUIPMENT: David White 2110 Laser Level, Leica Wild Model LNA2 Laser Level, Laser Reference Model L2 Laser Level, Nikon Model AP-7 28X Auto Level, Geotop Model G20B 20Z Level, Geotop GT-3 Builder’s Transit, SUPPORT EQUIPMENT: Simer 3/4in. Small Roofers Pump, Robin RGV6101 Generator, GX240 Water Pump, New Mustang Plate Compactors, New Mustang Concrete Vibrators, New Mustang Submersible Pumps, New Abrasive & Diamond Blades, New Stiff neck Pintle Hitches, New Air Spray Guns, New Ratchet Cargo Straps, New Impact Wrenches, Air Spray Guns, New Huskie Hammer Drill, New Jack hammer Hose, New Impact Wrenches, New Water Hose., Pintle Hitches, Ratchet Straps, Diamond Blades, Submersible Pumps, Concrete Vibrator, Impact Wrenches, Water Hoses, Air Spray Gun Kit, Water Pump, Mustang Rammer, Jack Hammer Air Hose, Hammer Drill, Hose Reels, Scaffolding, Porta Powers, Straps, Bottle Jacks, Battery Charger, Winches, Socket, Hose Reel, Booster Packs, Weedeater, Chainsaws, Vise, Sandblaster, Drill Press, Tri-Ball, Post Hole Digger, Cherry Picker, Wagon, Trailer Jacks. TEXAS AUCTION LICENSE: AUCTIONEER #16356 Michael W. Powers SALE SITE PHONE: (863) 660-3613

online bidding available: www.lyonauction.com DIRECTIONS: From Bush International Airport: Airport exit on JFK Blvd., take left ramp onto Will Clayton Parkway toward Central Cargo .2 miles. Continue on Jetero Blvd., continue on McKaughan Rd., left on Viscount Rd., left Mecom Rd. Take ramp onto JFK Blvd. toward Airport exit (I-45)/ Beltway 8/ Hardy Toll Rd. 2 miles. Take ramp onto Hardy Toll W toward Hardy Toll Rd. (tolls) for 2.9 miles. Take Hardy Toll Rd. North/ Woodlands exit onto Hardy Toll N (tolls) – 11.9 miles. Merge onto I-45 N for 8.4 miles. Exit #81/ Magnolia (FM-1488) toward Magnolia (I-45 S)/ Hempstead .3 miles. Take ramp onto I-45 S .2 miles, take ramp onto FM 1488 Rd. (FM-1488) toward I-45 N/ Sherbrook Dr. .3 miles. Take ramp onto North Fwy toward I45 N .2 miles. Take ramp onto FM 1488 Rd. (FM-1488) toward Magnolia (I-45S) Hempstead for 8 miles. Site is on left. Address: 8215 FM 1488, Magnolia, TX 77354.

ALEX LYON & SON Sales Managers & Auctioneers, Inc. Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com

Page 50 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SONS INC

FLANGE LOCK ................................................................6

HOUSTON TX 06/21/11..........................................49

FLUID CONTROL SERVICES ........................................6

ALLU GROUP.................................................................11

GRINDERCRUSHERSCREEN.COM ...........................18

ATLAS COPCO - ROCKSTAR ......................................15

HENDRIX MACHINERY LLC ..........................................3

BAR NONE AUCTION

INDEXATOR INC ...........................................................24

SACRAMENTO CA 06/11/11 ..................................49 BARGAINS .....................................................................39 BOBCAT COMPANY ......................................................38 BRADLEYS TRACTOR CITY ..........................................5 CASE TEXAS TRIPLE TREAT.........................................7 CAT AUCTION SERVICES LAFAYETTE 06/07/11 .............................................45 CHICAGO PNEUMATIC ................................................23 CLASSIFIEDS.................................................................39 CONSTRUCTION EQUIPMENT COMPANY ...............17 CONSTRUCTION EQUIPMENT GUIDE AIR COMPRESSORS PROMO .............................25 AUCTION TRIPLE PLAY ........................................43 CEG SCALE MODELS ...........................................28 CEG WANTED........................................................40

IRON PLANET JUNE AUCTION CALENDAR.................................41 JAMES G. MURPHY KENMORE (SEATTLE) WA 6/11/11 .......................48 JJ SCHECKEL CORP.....................................................11 KIRBY-SMITH MACHINERY INC ..................................15 KOMATSU AMERICA CORP .........................................30 LANDOLL CORP ............................................................35 LBX ..........................................................................26, 27 LEADING EDGE ATTACHMENTS ................................22 MB AMERICA INC .........................................................18 MIDCO DEMOLITION TOOL CO ..................................20 RECS-BAYONET BREAKER ........................................10 RITCHIE BROS. AUCTIONEERS

CEG WEB VALUE ADDED.....................................31

OLYMPIA WA 06/16/11 CALENDAR ......................51

DOOSAN INFRACORE AMERICA CORP ....................37

ROAD BUILDERS MACHINERY & SUPPLY ............2, 11

DOOSAN PORTABLE POWER ....................................29

ROAD MACHINERY CO ...............................................52

DURATECH ...................................................................14

SENNEBOGEN .............................................................16

DYNAPAC ......................................................................38

TEREX POWERSCREEN .............................................19

ESCO CORP .................................................................22

TOWMASTER ...............................................................36

FAE USA INC....................................................................8

WESTERN CONSTRUCTION AUCTIONS

FCC EQUIPMENT FINANCIAL .......................................8

PERRIS CA 06/09/11 ..............................................47

FELLING TRAILERS .....................................................34

WESTERN STATES CAT .................................................9

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2011 • Page 51

UNRESERVED PUBLIC AUCTION

Olympia

AUCTION CALENDAR

Washington June 16, 2011

36 3– 2007 KLEEMAN MC110Z 28 x 44 IN.

4 OF 5– 2011 KOMATSU D51EX-22 LOW METER HOURS

CURRENT INVENTORY INCLUDES:

36 27 52 9

– – – –

Crawler Tractors Wheel Loaders Excavators Articulated Dump Trucks

5 OF 10– 2011 KOMATSU WA320-6 LOW METER HOURS

21 8 5 17 47

– – – – –

Loader Backhoes Crushers Screen Plants Truck Tractors Dump Trucks

For complete and up-to-date equipment listings visit

» rbauction.com CALL TODAY TO ADD YOUR EQUIPMENT TO THIS UPCOMING AUCTION – 360.956.1500

Upcoming Unreserved Public Auctions

USA SACRAMENTO, CA MADISON, WI WILLIAMSBURG, VA CHICAGO, IL NASHVILLE, TN MORRILTON, AR DENVER, CO NORTH EAST, MD RENO, NV ATLANTA, GA LAS VEGAS, NV KANSAS CITY, MO OLYMPIA, WA MINNEAPOLIS, MN HOUSTON, TX COLUMBUS, OH ALBUQUERQUE, NM PITTSBURGH, PA PHOENIX, AZ JACKSON, MS SALT LAKE CITY, UT

530.724.3900 608.833.7006 757.566.0153 815.941.6400 615.453.4549 817.237.6544 970.535.6700 410.287.4330 775.342.6031 770.304.3355 702.644.2468 816.633.4096 360.956.1500 507.774.5050 713.455.5200 937.568.9500 505.836.0738 724.947.7240 602.269.5631 601.939.2258 801.250.1836

MAY 24 MAY 24 MAY 25 MAY 26 JUN 2 JUN 3 JUN 7 JUN 7 * JUN 9 JUN 9 JUN 10 JUN 15 * JUN 16 JUN 17 JUN 22 & 23 JUN 23 JUN 24 JUN 27 JUN 28 JUN 29 JUN 29

CANADA CHILLIWACK, BC LONDON, ON EDMONTON, AB SASKATOON, SK GRANDE PRAIRIE, AB REGINA, SK

604.823.2700 519.425.4321 780.955.2486 306.933.9333 780.538.1100 306.776.2397

* MAY 25 JUN 8 JUN 15 & 16 JUN 23 JUN 29 & 30 JUL 13

INTERNATIONAL MEPPEN, GERMANY OCANA, SPAIN AVIGNON, FRANCE POLOTITLAN, MEXICO PANAMA CITY, PANAMA BRISBANE, QLD, AUSTRALIA GEELONG, VIC, AUSTRALIA MOERDIJK, NLD MONCOFA, SPAIN * NOTE: NEW DATE – Dates are subject to change

AUCTION SITE: 13232 Case Road SW, Olympia, WA 98512 ∙ Sale Starts 8 AM Auction Company License #1981, Motor Vehicle Dealer License #1539

+49.5935.70550 +34.925.157580 +33.2.32778610 +52.427.266.0909 +507.266.2511 +61.73382.4444 +61.35245.3333 +31.168.392.200 +34.964.580559

MAY 26 JUN 2 & 3 * JUN 9 JUN 9 JUN 17 JUN 21 JUN 23 JUN 23 & 24 JUN 30 & JUL 1

Page 52 • May 21, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Value Priced • Quality Equipment

Call Gary or Wendy Today

For more details on our used equipment visit www.roadmachinery.com/equipment

866-400-5250

Dozers

Year STK#

Hours

Price

KOMATSU D65EX-15

2005

EMD145 3255

CALL

KOMATSU D65PX-15E

2008

EMD286 3120

CALL

KOMATSU D65PX-15E

2008

EMD292 2327

CALL

KOMATSU D65EX-15E

2007

EMD294 1519

CALL

2005 KOMATSU PC200LC-7, Stk# EMD60, 1339 Hrs, Cab with A/C ..........................................................................................CALL

2007 KOMATSU WA320L-5, Stk# EMD88, 2513 Hrs, ROPS cab w/AC ..........................................................................................................CALL

2007 KOMATSU D65EX-15E, Stk# EMD294, 1519 Hrs, ROPS Cab, Straight Blade..........................................................................CALL

Excavators Crawlers

Year STK#

Hours

Price

KOMATSU PC200LC-7

2005

EMD62

2296

CALL

KOMATSU PC200LC-7

2005

EMD61

2617

CALL

KOMATSU PC200LC-7

2005

EMD60

1339

CALL

KOMATSU PC220LC-8

2007

EMD81

2480

CALL

KOMATSU PC300LC-7

2005

EMD56

4166

CALL

KOMATSU PC400LC-7

2005

EMD16

3965

CALL

KOMATSU PC400LC-7

2005

EMD54

4148

CALL

KOMATSU PC400LC-7E0 2007

EMD24

2929

CALL

KOMATSU PC800LC-8

EMD110 1827

CALL

2008

2005 Komatsu PC300LC-7, Stk# EMD56, 4,166 Hrs, 10’5” Stick, 32” Tracks, Aux Hydraulics ....................................................CALL

SOLD 2008 KOMATSU PC270LC-8, Stk# EMD138, 1188 Hrs, Cab w/AC, 19’2” Boom, 10’ Arm, 31.5 Triple Grouser Track ....................CALL All certified machines include a minimum of 30 days powertrain warranty. All certified machines include the following financing (OAC). Subject to change without notice. 12 Months - 3.5% • 24 Months - 4.5% • 36 Months - 5.5% • 48 Months - 6.5%

2005 KOMATSU PC220LC-8, Stk# EMD81, 2480 Hrs, Cab w/AC, 19’2” HD Boom, 10’0” HD Arm, 31.5 Triple Grouser Track ......CALL

2005 KOMATSU PC400LC-7, Stk# EMD16, 3963 hours, Cab w/AC ................................................................................................CALL

Wheel Loaders

Year STK#

Hours

Price

KOMATSU WA450-6

2008

EMD180 585

CALL

KOMATSU WA250L-5

2007

EMD77

1274

CALL

KOMATSU WA320L-5

2007

EMD88

2513

CALL

KOMATSU WA450-6

2007

EMD64

2896

CALL

KOMATSU WA480-5L

2006

EMD18

4480

CALL

SOLD 1998 KOMATSU WA380-3, Stk# EMD4, 7478 hours, ROPS, Cab w/ A/C, GP BUCKET w/ BO Teeth ............................................CALL Corporate Headquarters

Komatsu Remarketing Certified Used Equipment

Arizona

Used Equipment Inquiries

Komatsu Distributor

www.roadmachinery.com/equipment

Contact

Gary Beal Used Equipment Manager 866-400-5250 gbeal@roadmachinery.com

Wendy Schwertley Sales Administrator 602-256-5189 wschwertley@ roadmachinery.com

For all other inquiries contact your local branch

Gilbert 480-545-2400 Phoenix 602-252-7121 Prescot 928-778-5621 Tucson 520-623-8681

New Mexico Albuquerque 505-345-8383 Farmington 505-324-8601

4710A East Elwood, Suite 6 & 7 • Phoenix, AZ 85040 Phone: 602-252-7121 • Fax: 602-253-9690 www.roadmachinery.com

California Northern California Sacramento 916-375-3540 Redding 530-229-3820

Southern California Los Angeles, Orange, Riverside, San Bernardino and Ventura Counties 909-355-3600 Bakersfield 661-695-4830 Perris 909-355-3600

Texas

El Paso 915-872-1001

Mexico

Cananea, Sonora 011-52-6453328300