a 22nd Anniversary Edition Ju gu August Au A 201 0 11 Vol 22 No. N Augu gust stt 2011, 011, 1, Vol ol 22 No o. 7
www.constructionreviewonline.com
In this issue... - Cover: The Hoover Dam Bypass - Movable Wall Partitions - Mpanga Hydro Power Plant - Dikgatlhong Dam Construction - Fulton Awards
25kVA- 10000kVA
THE LIGHTER SIDE OF LOAD SHEDDING. IF IT’S POWER YOU NEED SWITCH TO CAT.
you need for maximum efficiency and performance.
CONTINUITY - When you choose Cat equipment, all the products of your electric power system fit together seamlessly. Cat components, controls and support from Barloworld Power combine with Cat generator sets to ensure efficiency and provide the peace of mind of a completely integrated operation.
STABILITY - When Barloworld Power supplies your operation with electric power, you know Caterpillar is behind you, all the way. One company is always there to get your operation up and running and to keep it running, no matter what the circumstances. For more information call Barloworld Power on 011 898 0222
DEPENDABILITY - Power is the force that keeps your operation alive. Depend on Barloworld Power to provide the equipment and support to keep your power flowing. SUPPORT - One company offers the complete equipment management solutions that keep your operation running smoothly. From analysis and assessment to the service agreements that take maintenance worries off your mind, Barloworld Power can supply the total support
© 2009 Caterpillar Inc. All Rights Reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Always available • Always on
Experience matters For 90 years, the construction industry has trusted Established 1921
For 90 years, Scaw has been a leading supplier to the construction industry. Whether it’s hoisting, reinforcing or excavating, Scaw produces an extensive range of products that drive safety and productivity in construction projects. Whether supplying wire and strand products, Haggie® steel wire rope, chain products or steel specific to the construction projects, Scaw designs and delivers the highest quality products to customer specifications. Experienced and qualified teams with extensive experience in all aspects of the application of our products are on call to advise and support the selection, handling, installation and maintenance of products vital to driving safety, productivity and profit in the construction industry. Scaw products and expertise are delivered nationally and internationally. Join Scaw’s global safety and productivity drive, call: Wire and Strand: Tel: +27(11) 876 2600 ® Haggie Steel Wire Rope: Tel: +27(11) 620 0000 Chain Products:
Tel: +27(16) 428 6000
Rolled Products:
Tel: +27(11) 842 9359
website: www.scawmetals.com
MAGAZINE CONTENT
18
August 2011, Volume 22 No. 7
Construction and EngineeringCompanies at Risk with Poor Suppliers By Brian Peterson, industry analyst, Coface
September Cover Story
Absolute Towers, Mississauga, Canada Absolute Towers is a set of five residential towers in the city of Mississauga, Ontario, Canada.
8 9 12 13 13 14 14
Cover Story The Hoover Dam Bypass
16
Company Profile Salehbhai Glass & Aluminium Ltd
17
International Project Z-15 Tower Beijing's Tallest New Building
22
GUEST Construction and Engineering
24
PERSONALITY Building Infrastructure for Posterity
25
56
Construction Review is published eleven times a year and is circulated to members of relevant associations, governmental bodies and other personnel in the building and construction industry as well as suppliers of equipment, materials and services in Africa, the Middle and Far East. The editor welcomes articles and photographs for consideration. Material may not be reproduced without prior permission from the publisher. The publisher does not accept responsibility for the accuracy or authenticity of advertisements or contributions contained in the journal. Views expressed by contributors are not necessarily those of the publisher.
REGULARS The Site Board News New Products Association News Events Corporate News Association Partners
Vol. 22 / No. 7 ISSN 1025-2886
Home page:
Š All rights reserved.
6
www.constructionreviewonline.com
August 2011
31
WEB CONTENT main.constructionreviewonline/web.html
PICTORIAL Addis Build Exhibition 2011 Yapi-Turkeybuild Istanbul Commissioning of Lafarge WAPCO Cement Nigeria Power Plant
23 23 23
SUPPLEMENTS Movable Wall Partitions Faux Tin Ceilings
18 20
PROJECTS Mpanga Hydro Power Plant Mpanga Hydro Power Commissioned UHMG HO Building and Warehouse Ntinda, Uganda GEM Engineering Co. Ltd PSPF House The Club Dikgatlhong Dam Construction Reaches Critical Stage Bridging the Gap Redirecting Commuters Easily in Kwa-Zulu Natal Fulton Awards Delivering Life’s Essential Resource To Dukuza Index
30 31 32 34 42 46 48 50 51 56 63 64
Sunrise Tower Sunrise Tower, in Kuala Lumpur, Malaysia, is a mixed-use tower consisting of offices, commercial, hotel and residential.
42
August 2011
7
MANAGING EDITOR Robert Barnes EDITOR Lucy Njogu COUNTRY EDITORS Kenya - Francis Makari South Africa - Jasin Maddox Uganda - Irene Kabuzire WRITERS Lisa Kamau, Peace Muchiri, Irene Kabuzire, Ann Kariuki, Lindsay Wagner, Elaine Young, Jacqueline van Staden
The Site Board
Sub-Saharan Africa has made rapid progress towards the Millennium Development Goals (MDGs) The Millennium Development Goals Report 2011 was launched in Geneva by the Secretary-General on 7 July 2011. The report, which presents the yearly assessment of global progress towards the MDGs, shows that although significant strides have been made, reaching all the MDGs by 2015 remains challenging because progress has failed to reach the most vulnerable.
CHIEF DESIGNER Simon Muhia WEB / GRAPHIC DESIGN Augustine Ombwa ADVERTISING EXECUTIVES Kenya Arthur Makau,Titus Oyuga, Frances Lagoussis (Mombasa), Trizah Njoroge
The report says that the number of people in sub-Saharan Africa with access to safe drinking water increased from 252 million to 492 million between 1990 and 2008, growing from 49 to 60 percent of the population. But there are wide disparities: in cities, the poorest 20 percent of households are 12 times less likely to enjoy piped drinking water at home than the richest 20 per cent. Sixty-two per cent of the urban population lives in slums, the highest rate of any region.
South Africa: Tabitha Muthoni, Winnie Sentabire, Pindiwe Ketelo, Petty Gonye, Angeline Ntobeng, Kevin Schorr, Thabo Mulomba Uganda: Winfred Nakairu, Deus Mutyaba Botswana: Dickson Manyudza, Gerald Mazikana Tanzania: Tom Kiage Malawi: Anderson Fumulani
Although aid to developing countries reached a record high in 2010, the report notes, only $11 billion has been received of the $25 billion increase promised to sub-Saharan Africa at the 2005 Gleneagles G8 Summit, owing mainly to shortfalls from some European donors that give large shares of their aid to Africa.
Ghana: Anthony Hondah, George Laing Zimbabwe: Cyri’l Zenda Rwanda: Collison Lore Nigeria: Seni Bello China:Weng Jie
Published by Group Africa Publishing Ltd Botswana Office Cadline (Pty) Ltd. P/Bag 494 Gaborone, Botswana. Tel: +267 318 7101 Fax: +267 318 102 E-mail: botswana@ groupafricapublishing.com
Zimbabwe Office CMC Media Publications (Pvt) Ltd, P.O. Box 4828, Harare, Zimbabwe. E-mail: zimbabwe@ groupafricapublishing.com
China Office Hangzhou Oversea Advertising Ltd 55-3-703 Guan Lane, Hangzhou, Zhejiang 310003, China Tel: +86-571- 87063843 Fax: +1-928-752-6886 (retrievable worldwide) Email: china@ groupafricapublishing.com
Tanzania Office Daas Agencies Ltd P. O. Box 96061 Tel: (022) 2124328 Fax: (022) 2124328, Dar es Salaam E-mail: tanzania@ groupafricapublishing.com
Ghana Office Apex Media Africa P.O. Box 2558 Accra GP +233 (0)302 942 528 apex@groupafricapublishing.com
Nigeria Office B23/24, Aishetu Emoewa Plaza 196, Iju Water Works Road, Ifako Ijaye Lga,Agege, Lagos. Tel: 234-1-7347860 Email: nigeria@ groupafricapublishing.com
Kenya Office Northwest Ventures Ltd P.O. Box 16414 Nairobi 00100 Kenya Tel: +254 20 2679809, 2679808, 2091305 Email: kenya@ groupafricapublishing.com Malawi Office Centre for Media Advocacy P.O. Box 1732, Blantyre, Malawi Tel: 2659954854 E-mail: malawi@ groupafricapublishing.com Rwanda Office Kolline & Hemed Inc., B.P. 3328, Kigali, Rwanda Tel: +250 03 748106 E-mail: rwanda@ groupafricapublishing.com Website: www.kollinehemed.org
South Africa Office College Publishers Ltd No. 9 St. Davids Road, Parktown, Johannesburg, SA Tel: 27 11 484 0119, 642 5283 Fax: 27 11 484 6706 E-mail: southafrica@ groupafricapublishing.com Uganda Office Trine Media Ltd 5th Floor Greenland Towers, Kampala Road, Uganda P.O. Box 37690, Kampala Tel: 256 414 340394/312 287770 Fax: 256 414 340393 Email: uganda@ groupafricapublishing.com
Robert Barnes
September 2011
October 2011
Lifts Raising efficiency levels
Security High tech security solutions
Wet services Water reticulation
Fire fighting Fire retardant materials in construction
November 2011
December 2011 - January 2012
Computer Software for Construction
Wood Products Air - Conditioning
IT Services
The editor accepts letters and manuscripts for publication from readers all over the world. Include your name and address as a sign of good faith although you may request your name to be withheld from publication. We reserve the right to edit any material submitted . Send your letters to:
info@constructionreviewonline.com
NEWS
Kenya US$ 40 Million Loan for Rift Valley Railways The Board of Directors of the African Development Bank (AfDB) has approved a US$ 40-million loan to finance the Rift Valley Railways (RVR). The five-year US$ 246 million capital investment program involves two concessions over a rail network running from Mombasa in Kenya to Kampala in Uganda. The refurbishment and operation of the RVR is expected to simultaneously improve the quality and lower the cost of rail freight services in East and Central Africa. For example, the volume of goods transported is expected to more than double to 3.3 million tons per annum by 2015, while marginal costs are expected to drop by up to 30%. In the next 15 years, the project is expected to generate significant revenue for the Kenyan and Ugandan governments and have positive environmental effects by reducing the volume of goods transported by more polluting trucking services.
Local Contractors Offered Lease Financing to Face Foreign Competition
The refurbishment and operation of the RVR is expected to simultaneously improve the quality and lower the cost of rail freight services in East and Central Africa
Tanzania
Tanzania’s local contractors can now acquire construction machinery through lease financing, thanks to an arrangement between GF Trucks & Equipment Ltd and Stanbic Bank Tanzania. "GF Trucks in collaboration with Stanbic Bank Tanzania have decided to introduce lease financing of construction equipment to Tanzanian contractors as part of the efforts to foster sustainable development," said GF Trucks Sales Manager, Mr. Eustachius Katiti. He also expressed hope that the arrangement would empower local contractors to compete with their foreign counterparts. Major construction projects in the country are being carried out by foreign construction firms, due to what he described as lack of modern equipment to implement the projects. Mr Katiti said apart from lack of modern equipment, local contractors also lack funds and experience to embark on huge projects. G F Trucks & Equipment Ltd was incorporated in February 2007. It currently holds franchise for products such as FAW commercial vehicles, Great wall light commercial vehicles, XCMG construction and Suchi Bus Company Limited.
Tanzania’s local contractors can now acquire construction machinery through lease financing
Rwanda EIB Commits to Ruzizi III Hydropower Project The European Investment Bank, the long-term lending institution of the European Union and the world’s largest multinational lending body has confirmed that it will work closely with financial preparation of the Ruzizi hydroelectric project to be launched in Kigali. This landmark scheme has the potential to transform electricity supply to Rwanda, Burundi and the Democratic Republic of Congo, and would represent the first public-private sector energy engagement in the Great Lakes region. The overall project cost of the Ruzizi hydropower scheme is estimated to be US$ 535 million. The EU-Africa Infrastructure Trust Fund has provided US$ 4 million of grant funding for studies examining the economic soundness, environmental and social impact, water management and electricity links, and institutional strengthening of EGL.
August 2011
The overall project cost of the Ruzizi hydropower scheme is estimated to be US$ 535 million.
9
NEWS
World Bank Approves US$150 Million for Urban Development Project
Ethiopia
The World Bank’s Board of Directors has approved a US$150 million loan that could see more than 2.8 million Ethiopians benefit from better urban governance, infrastructure, and public services. The new loan will scale up the support provided through the Ethiopia Urban Local Government Development Project (ULGDP) for performance improvement in the planning, delivery, and sustained provision of priority municipal services and infrastructure by urban local governments. Nineteen cities comprising about 42 percent of Ethiopia’s urban population are receiving performance grants for infrastructure, and another 18 cities will receive capacity building support to prepare them for future investment financing. During the initial three years of ULGDP, the participating cities performed better than had been anticipated when the project was designed. Citizen participation in investment planning has increased, and investment plans are closely aligned with the expressed priorities of citizens.
US$ 67 Million for Gitega-Nyangungu Road
Nineteen cities comprising about 42 percent of Ethiopia’s urban population are receiving performance grants for infrastructure, and another 18 cities will receive capacity building support to prepare them for future investment financing.
Burundi
The Boards of Directors of the African Development Bank (AfDB) Group have approved a grant of US$67.23 million in funding for Phase II of the Gitega-Nyangungu-Ngozi road project in Burundi. The new finance will be used to fund the Gitega-Nyangungu segment of the road. Of the total, USD51.22 million is provided from the resources of the AfDB’s Fragile States Facility (FSF) and USD 16.01 million from the African Development Fund, the Bank Group’s concessional arm. Phase II is a follow-up of Phase I which was approved by the AfDB in September 2011. This phase will cover the development and asphalting of the Gitega-Nyangungu segment plus the rehabilitation of 22kms of rural roads, building pedestrian bridges, creating a heavy vehicles parking lot at Gitega, together with the development of socio-economic and commercial infrastructure. The work will proceed from August 2011 to March 2015. The project area extends from the centre to the north of the country and is home to an estimated 775,000 people. Gitega and Ngozi are the country’s second and third largest towns respectively.
Infrastructure Development Bank of Zimbabwe Invests US$ 100 Million in Projects
The new finance will be used to fund the Gitega-Nyangungu segment of the road.
Zimbabwe
The Infrastructure Development Bank of Zimbabwe has invested over US$100 million in housing, energy and transport sector projects being undertaken in conjunction with local authorities. This is in response to the Government's challenges in infrastructure development, with the advent of cash budgeting introduced at the onset of the multi-currency regime. The Government decided to actively involve partners such as local authorities to ensure that the IDBZ could adequately and speedily deliver on the selected projects. Among notable projects being financed by the IDBZ are power generation at Kariba South, Hwange and smaller thermal power stations in Harare, Bulawayo and Munyati. The Zimbabwe government also recently financed the upgrading of the Joshua Mqabuko Nkomo International Airport in Bulawayo with a US$5million budget allocation this year while last year US$4.1million was provided. 10
The Infrastructure Development Bank of Zimbabwe has invested over US$100 million in housing, energy and transport sector projects being undertaken in conjunction with local authorities.
August 2011
NEWS
BAM Construction for £20 Million Eco-Friendly Hotel
United Kingdom
Construction is due to start on a new 200-bed upmarket hotel at The University of Nottingham. With planning permission already in place, the University’s Council have now given approval for the £20 million eco-friendly hotel, which will be built on University Park, adjacent to the East Midlands Conference Centre. The hotel, which will be funded entirely by the University, will be available for use by conference delegates, university visitors, local businesses and the general public. Contractors BAM Construction were appointed to start work on site during July. BAM Construction is a top 10 national contractor with extensive experience in building both education and hotel facilities. The hotel is due to be completed for opening by the end of 2012. Built to the highest environmental standards, the hotel will feature state-of-the-art technology to reduce carbon emissions, as part of the University’s strategy to become an ever more environmentally-friendly institution. It will feature some executivestyle rooms, meeting and conferencing rooms, a gym as well as a restaurant and bar.
World’s Fourth Biggest Mall to be Launched in September
The hotel will feature state-of-the-art technology to reduce carbon emissions, as part of the University of Nottingham's strategy to become an environmentally-friendly institution
Iran
Royal Star International, a UAE-based conglomerate specializing in the development of multiplexes and shopping malls, has announced the completion of its flagship US$ 830 million world-class shopping mall project in Shiraz, Iran. The ‘Fars Shopping Complex’ will be the world’s biggest mall in terms of the number of shops in one complex, offering 2,500 shops for lease upon its opening in September 2011. It will also be the world’s fourth biggest mall in terms of total area stretching out to around 420,000 square meters, closely following the Dubai Mall. The project will also house a luxurious fivestar hotel, an amusement park and world-class exhibition and convention centres. The large complex will house a 14,000 square meter Carrefour Hypermarket; six 240-seat capacity cinemas that will offer the most modern 2D, 3D, and 4D screening equipment; an indoor amusement park; a 28,800 square meter arcade offering interactive video games, bowling alleys and a three-storey billiard hall; and a four-storey parking area that can accommodate 5,500 cars. One of the main attractions of the new complex is a large outdoor The ‘Fars Shopping Complex’ will be the world’s biggest mall in terms of the number of shops in one complex, offering 2,500 shops for lease upon amusement park called ‘Iran Land,’ which will feature state-of-the-art thrilling its opening in September 2011. roller coaster rides.
China World’s Longest Sea Bridge Opens After four years of construction China’s 42.5 kilometre Qingdao Jiaozhou Bay sea bridge has been opened. Stretching across the wide blue waters of Jiaozhou bay, the vast Y-shaped bridge connects the booming Northern port city of Qingdao with an airport built on a nearby island and the industrial suburb of Huangdao. It cuts the distance between Qingdao and Huangdao by 30 kilometres. The sea bridge, which is said to be the longest in the world, was constructed by state-owned Shandong High Speed Group at a cost of US$ 2.3 billion. 450,000 tons of steel and 81 million cubic feet of concrete were consumed in its construction. Qingdao is one of China’s fastest-growing cities. It is among the top ten largest container ports in the world, and is the main port of the Chinese navy. China’s 42.5 kilometre Qingdao Jiaozhou Bay sea bridge cuts the distance between Qingdao and Huangdao by 30 kilometres.
August 2011
11
PRODUCTS
Sandvik’s CH890 and CH895 Cone crushers Thanks to their specialized geometries, 1000 horsepower, greater structural strength and proven technologies, the newly launched CH890 and CH895 are designed to increase performance in both secondary and tertiary/ pebble crushing applications. The specially designed, strength-optimized topshell and dedicated crushing chambers of the CH895 model make it ideal for tertiary and pebbles crushing while the CH890 topshell and crushing chambers are dedicated to secondary crushing. Both units have more power and increased crushing force in order to increase productivity. The new mainshaft, made from a new high-strength material, is designed to withstand harsh mining requirements while the strength-optimized bottomshell design allows for greater loads. Simply stated, the heavy-duty structural design ensures durability and longevity in the most demanding conditions. The CH890 and CH895 crushers have been dedicated to specific applications while sharing the same platform for easy service and support which should facilitate efficient inventory management and parts forecasting.
New Products from Davis & Shirtliff Davis & Shirtliff have added new products in their growing portfolio. The pumps division has seen the addition of the DDV60 low cost well pump, which provides low output at heads of up to 70m, the DDP50A, a self contained low cost pressure pump and extension of the established DB range with two larger sizes, DB 8 & 12. The Solar range has been extended to include street lights and high capacity batteries and Reverse Osmosis offerings have been expanded with two model ranges, PRO RO and DRO with capacities from 1 to 5m3/hr, which will improve availability, performance and serviceability. Another important initiative is the introduction of the Dayliff Yanan Genset range from 17 to 108kVA. These products are well proven internationally and extremely competitive. Finally the Pool division has introduced a range of highly competitive Sawo saunas and steam generators.
Quick Cuts with Tradeweld’s 40A Plasma Cutter Tradeweld’s 40A Plasma Cutter slices through metal with ease, producing clean and accurate cuts with no distortion of materials. It is lightweight, portable and extremely versatile – making it the perfect alternative to more traditional cutting and welding methods for both professionals and DIY enthusiasts and hobbyists. Suitable for panel beaters, exhaust shops, sheet metal shops, light fabrication or light agricultural use, Tradeweld’s 40A Plasma Cutter replaces oxygen and acetylene gas cylinders, providing a cost effective solution that increases productivity. It cuts all types of steel (mild steel, stainless steel and non-ferrous metals). The Plasma Cutter comes with a PT31 plasma cutting torch, watertrap, regulator, starter pack, air hoses and an instruction DVD. The single phase 220V is suitable for standard 15 amp electrical power points.
Leica RCD30 60MP Multispectral Camera Leica Geosystems, leading manufacturer of airborne sensors, has released the Leica RCD30, the first metric medium format 60 MP camera to acquire co-registered multispectral data in RGB and NIR for photogrammetric and remote sensing mapping applications. The Leica RCD30 is the first 60MP medium format camera that can record co-registered multispectral four-band imagery in RGB and NIR. In addition, a variety of innovative design features such as mechanical motion compensation along two axis, specifically designed lens systems as well as state-of-the-art calibration techniques make the Leica RCD30 the most advanced and most suitable single-lens medium format sensor for professional photogrammetric and remote sensing applications. The Leica RCD30 can be integrated with Leica ALS LiDAR systems and as such succeeds the Leica RCD105. In addition, the Leica RCD30 can be configured as a fully integrated standalone single and multi-head camera system with GNSS/IMU and specialized mount to increase area coverage and data acquisition efficiency. 12
August 2011
ASSOCIATION NEWS & EVENTS
Association of Building Contractors in Botswana (ABCON) Date: Venue: E-mail: Website:
15-17 September Fairgrounds Complex, Gaborone abcon@info.bw www.abcon.co.bw
The “Building Botswana” Conference and Exposition will be sponsored by ABCON (the Association of Building Contractors in Botswana) in association with Tshipidi Badiri (the association of citizen building contractors). Designed to provide building contractors, engineers, architects and related services companies with information, the Building Botswana event builds on the success of expos held by ABCON in previous years. The focus will be on 2 key themes, the first of which will be- using standardization to improve profitability in contracts. The second theme will be how contractors can benefit from Government’s move to smaller contracts through reservation, nomination, focus on maintenance, etc. Of special interest to the building industry will be the ‘kick-off’ of a major
initiative by the Department of Building and Engineering Services (DBES) to ease the participation of small and medium contractors in government projects, while improving quality. Also, for the first time this year, the conference will be held in conjunctions with the award for the ‘Best Builder in Botswana’ prize sponsored by PPC Cement Botswana. The awards dinner will be held on 16th September.
Infrastructure Partnerships for African Development Angola (iPAD Angola)
Date: Venue: Contact Person: E-mail Address: Website:
September 13-16, 2011 Talatona Convention Hotel, Luanda, Angola Jose Monteiro jose.monteiro@spintelligent.com www.angola.ipad-africa.com
iPAD Angola 2011 will bring together investors, high profile government dignitaries and high profile executives from national and international public and private companies, in order to explore investment opportunities, assess the Angolan business ecosystem, understand the operational and regulatory frameworks, as well as to establish partnerships in the following sectors: Logistics and Transport, Energy, Water and Sanitation, Agriculture and Mining.
The Builders - The International Exhibition for Building and Construction in East Africa Date: Venue: E-mail: Website:
Sep 16-18, 2011 Munyonyo Commonwealth Resort, Kampala – UGANDA info@builders-exhibition.com www.builders-exhibition.com
The Builders is a biannual event held every two years in one of The East African Countries. It is an international exhibition and trade show for building & construction industries in the East African Region. The Builders hosts key decision makers of the Building and Construction industry from all around the world, who are interested in investing in the East African market. It provides an excellent opportunity for all the key players and exhibitors to find their target customers whether they are retailers, wholesalers or manufacturers. The Builders is a good opportunity for everyone who seeks to network with high profile attendees within governmental companies, investors, engineers, architects, builders and decision makers under one roof and face to face. August 2011
13
CORPORATE NEWS
South Africa Afrox Officially Opens Its Re-Engineered Gases Operation Centre
Sika stands up for Sustainability and Health & Safety Sika is pleased to announce yet another achievement; the Occupational Health and Safety Certification OHSAS 18001, awarded in 2011. Sika is the first construction chemicals company in South Africa to be awarded this certification.
Afrox has officially opened its multi-million rand re-engineered Gases Operation Centre (GOC) in Germiston, the foundation of the company’s Merchant and Packaged Gases (MPG) business in Africa. The newly upgraded GOC is the company’s largest special gases facility and laboratory on the continent and the only nitrous oxide production plant in South Africa.
OHSAS 18001 is an Occupation Health and Safety Assessment Series for health and safety management systems. Intended to help organisations control occupational health and safety risks in the workplace, it was developed in response to widespread demand for a recognised standard against which to be certified and assessed. Sika in conjunction with OHSAS 18001 is fully committed to health and safety in the workplace, and the safety of the workforce.
Association Partners Kenya
- Architectural Association of Kenya
South Africa ASAQS
- Institute of Quantity Surveyors of Kenya
SAICE
- Institute of Engineers of Kenya
South African Council for the Quantity
- Association of Consulting Engineers of - Kenya
Surveying Profession
- Association of Proffessional Societies of East
Khuthaza ( Women for Housing)
Africa APSEA)
Concrete Manufacturers Association
- Kenya Property developers Association
Green Building council of SA
- Institution of Surveyors of Kenya
South African Property Owners Association Master Builders South Africa
Tanzania
Botswana - Tanzania Institute of Quantity surveyors
Institute of Botswana
- Construction Regulation Board (CRB) - Tanzania’s Registration Board of Architects and Quantity Surveyors (AQSRB)
Namibia Institute of Namibian Quantity Surveyors Association of Consulting Engineers of Namibia
Zimbabwe Zimbabwe Institute of Quantity Surveyors Zimbabwe Institute of Engineers The Construction Industry Federation of Zimbabwe
Uganda Institute of Surveyors of Uganda
(Cifoz) 14
August 2011
The Hoover Dam Bypass The Hoover Dam Bypass, which includes the Mike O’Callaghan-Pat Tillman Memorial Bridge, was completed and opened to traffic in November 2010. It is the first concrete-steel composite arch bridge built in the United States, and includes the longest concrete arch in the Western Hemisphere. Project Team Contractors: R. E. Monks ConstructionVastco Inc.Edward Kraemer & Sons, Inc. Obayashi Corporation PSM Construction USA Inc. Las Vegas Paving Frehner Construction Company, Inc.
History Prior to completion of this project, the existing route of U.S. 93 used the top of Hoover Dam to cross the Colorado River. U.S. Highway 93 is the major commercial corridor between the states of Arizona, Nevada, and Utah; it is also on the North American Free Trade Agreement (NAFTA) route between Mexico and Canada. U.S. 93 was identified as a high priority corridor in the National Highway System Designation Act of 1995. The traffic congestion caused by the inadequacy of the existing highway across the dam imposed a serious economic burden on the states of Arizona, Nevada, and Utah.
Construction Inspection & Support: PB Americas PBS&J Construction Services
The traffic volumes, combined with the sharp curves on U.S. 93 in the vicinity of Hoover Dam, created a potentially dangerous situation. A major catastrophe could occur, involving innocent bystanders, millions of dollars in property damage to the dam and its facilities, contamination of the waters of Lake Mead or the Colorado River, and interruption of the power and water supply for people in the Southwest.
Environmental Impact Study Consultant: CH2M Hill
By developing an alternate crossing of the river near Hoover Dam, through-vehicle and truck traffic are removed from the top of the dam.
Design Team: HDR Engineering Jacobs (formerly Sverdrup)T. Y. Lin International
16
The joint venture contractor building the Colorado River Bridge, Obayashi Corporation and PSM Construction USA, Inc. completed the steel box girders; poured the concrete deck, pedestrian sidewalk, and roadway barriers, and worked on the pedestrian railing. Many detailed and important tasks were accomplished before the Bridge was fully complete.
This new route eliminates the problems with the former highway--sharp turns, narrow roadways, inadequate shoulders, poor sight distance, and low travel speeds. Design Work Design work for the Hoover Dam Bypass Project began in August 2001. The earlier studies and environmental evaluations had identified the Sugarloaf Mountain Roadway Alignment as the preferred alternative. The new roadway alignment begins near the Hacienda Hotel and Casino on the Nevada side and follows a route just south of existing U.S. 93 to the Reclamation warehouse area. This new alignment crosses over the existing roadway in a northeast direction, curves back around to the southeast and crosses back over to the south side of the existing roadway. The new alignment then proceeds in a southeast direction and cross the Colorado River approximately 1,500 feet downstream of the Hoover Dam. The new highway then proceeds past Sugarloaf Mountain and ties into existing U.S. 93 at about milepost 1.7 in Arizona. Construction of the bypass includes canyon crossing bridges, grade separation structures, wildlife crossings and the Colorado River crossing. Several power line towers have also been relocated to make way for the new highway. Now that the Bypass is completed the existing highway will remain in service but will not carry US93 through traffic. Read more on this article at http://main.constructionreviewonline.com
August 2011
Salehbhai Glass & Aluminium Ltd Profile A long established and reputable company in the market and among the pioneers in Tanzania in the glass and aluminium industry, Salehbhai Glass & Aluminium has been in business since 1954 with a committed vision to provide the best quality products and prompt services to its customers. The Company’s core glass business is one of the leading suppliers and processors of all types of glass in different designs, colours and thickness, in Tanzania. The Company also exports to neighbouring countries. The Glass division’s strengths lie in its pioneering status, competitive pricing, and prompt service with high quality finishes. The Company not only has an impressive array of European processing machines in its newly constructed 2,000m2 factory premises, but is also very close to installing a glass toughening line, the first of its kind in Tanzania, as part of its wider strategic development and to continue leading from the front. The commitment to this toughening line, whilst challenging for the Company considering the local environment, will aim to provide significant benefits to the Tanzanian economy in the long term. The Company’s aluminium division began in 1995, and rapidly grew to be an important part of the business. The division’s key strengths include firstly its commitment to complete its projects fully, on-time and with high quality finishing and secondly, its continuous investment in its experienced and longstanding local work force. The Glass division has a presence in all the regions of Tanzania through its partners down to district level, whilst the Aluminium division has successfully completed many projects around the country. Sajjad Salehbhai (Managing Director and Company Owner) overall approach and performance objectives can be summed as:• Innovative strategic development to ensure that the Company leads from the front; • Timely completion of orders and projects; • Provision of on-site ad-hoc advice as part of its service. These objectives resonate well with its mission, which is a commitment and vision to provide the best quality products and prompt service to customers, in conjunction with training, developing and unlocking the potential of its experienced staff, all targeted with clear goals to be recognized as East Africa’s premier glass and aluminium providers.
August 2011
SALEHBHAI GLASS & ALUMINIUM LTD Distributors of all types of: Ͳ ŽŶƐƚƌƵĐƟŽŶ ŐůĂƐƐĞƐ͖ Ͳ DŝƌƌŽƌ ƉƌŽĚƵĐƚƐ͖ Ͳ >ŽƵǀƌĞ ŐůĂƐƐĞƐ Θ ĨƌĂŵĞƐ͖ Ͳ >ĂŵŝŶĂƚĞĚ ŐůĂƐƐ ƉƌŽĚƵĐƚƐ͖ Ͳ dŽƵŐŚĞŶĞĚ ŐůĂƐƐ ƉƌŽĚƵĐƚƐ͘ 'ůĂƐƐ ĂŶĚ ŵŝƌƌŽƌ ƉƌŽĐĞƐƐŽƌƐ͘ ůƵŵŝŶŝƵŵ ĨĂďƌŝĐĂƚŽƌƐ ĨŽƌ͗ Ͳ ŽŽƌƐ͖ Ͳ tŝŶĚŽǁƐ͖ Ͳ KĸĐĞ ƉĂƌƟƟŽŶƐ͖ Ͳ ^ŚŽƉ ĨƌŽŶƚƐ͖ Ͳ ƵƌƚĂŝŶ ǁĂůů ƐLJƐƚĞŵƐ͖ Ͳ ůƵŵŝŶŝƵŵ ƉĂŶĞůƐ͘ ,ŝŐŚ ƋƵĂůŝƚLJ ĐĞŝůŝŶŐ ƐLJƐƚĞŵƐ ĐŽŶƚƌĂĐƚŽƌƐ
Over 55 years in glass business and never knowingly undersold
NEED WE SAY MORE ^ĂůĞŚďŚĂŝ 'ůĂƐƐ Θ ůƵŵŝŶŝƵŵ >ƚĚ ŐŐƌĞLJͬ/ŶĚŝƌĂ 'ĂŶĚŚŝ ^ƚƌĞĞƚ W͘K͘ Ždž ϰϬϵϭϳ Ăƌ ĞƐ ^ĂůĂĂŵ dĞů͗ ϬϮϮ Ϯϭϭϱϴϱϵ &Ădž͗ ϬϮϮ Ϯϭϭϴϴϵϲ DŽď͗ Ϭϳϱϰ ϳϴϲϭϮϭ͕ Ϭϳϲϰ ϳϴϲϭϮϭ ŵĂŝů͗ ƐĂůĞŚďŚĂŝΛƌĂŚĂ͘ĐŽŵ 17
Movable Wall Have a party in one room and put your children to sleep in the other - the walls are perfectly soundproof! Change the appearance of your rooms every day - your imagination is the limit. In factories throughout the world, temporary office space is often needed for special short-term projects that require management personnel to be on-site. In the past, costly construction had to be done to create office space to accommodate the influx of workers. This was an inefficient process that wasted time and money.
Movable wall partitions have become today’s most mobile and flexible wall system as their advantage is making it possible to divide one room into several different ones with incredible sound insulation. With movable walls you can divide a large room into many smaller ones and turn it back into a big room again whenever you need to. 18
Today, office wall partitions provide a quick and effective solution for the creation of temporary office space. These movable wall systems can easily be maneuvered to create a custom space to suit any need. For this reason, plants everywhere are turning to these systems to accommodate their needs for temporary office space during their important projects. Mobility The most obvious benefit of office wall partitions is their mobility. While these movable wall systems are highly durable and stable, they can still be moved easily to create the perfect temporary office space. Whether one open office space is needed or a temporary office with several rooms, movable room dividers can create the perfect space for every need. Cost Spending significant amounts of money on a temporary office space just doesn’t make sense. What’s the point of spending up to hundreds of thousands of dollars for an office that will only be used for a short period of time? Office wall
partitions have all of the same benefits of traditional construction at a fraction of the price. This saves companies a considerable sum of money. Time Additionally, construction of a temporary office can be time consuming. Again, it doesn’t seem logical to waste precious time building an office that’s going to be used for just a few short weeks. A movable wall system can be put in place in just minutes. A variety of wall "systems" have been developed over the years to accommodate the need for access and flexibility of facility managers, each with unique benefits designed to meet specific interior wall requirements. Movable, demountable, operable, retractable, portable and systems walls are all terms of similar, yet uniquely different solutions to meet this challenge. As a guide for building owners, facility managers and architects, the various types of systems can be grouped and defined as follows: Operable walls Operable walls, also known as retractable walls, are usually the most expensive type of systems because of the support mechanism required to suspend the panels. Operable walls are generally individual panels hung from an overhead support with rollers. The panels are simply rolled into an open or closed position, either by hand or via a power-operated mechanism in the overhead track. Panels may be hung individually, as pairs, or as a group. This type of wall system requires structural support, so it cannot be moved from its original installed position. Panel surfaces vary from steel with a baked enamel finish to fabric covered tackable August 2011
Partitions surfaces and Formicar type laminate surfaces. Because of the complexity of the system, and the need for overhead support, prices for a typical operable wall are in the $20 to $45+ per square foot range. Operable walls are commonly used in areas that need to be divided instantly, by the building occupants. Excellent for use in hotel meeting rooms, gymnasiums, restaurants and classrooms, it's not unusual for an operable wall to extend to ceiling heights of 30 to 35 feet and higher. Sound Transmission Classification ratings are typically in the 38 to 52+ range. Operable walls are usually not fire-rated, and do not have power carrying capabilities. Portable walls Portable walls are also in the upper price range of the various wall systems, with typical prices in the $100 to $150 per lineal foot range, installed. Portable walls are individual panel units complete with a self-contained head and base. Panels are held in place by pressure, can be carried to a new position and installed very quickly. Most types require ceiling strengthening because of the upward pressure of the ceiling channel. Portable walls are commonly used in areas which need to be divided often, but in different layouts. These systems are popular in restaurants, hotel meeting rooms and in schools to subdivide classrooms. STC performance is typically limited, but since the system is used more as a divider than a permanent wall, sound control is not a major concern. Typically not available fire-rated, and these types of systems do not have power carrying capabilities. August 2011
Movable walls Movable walls are unitized panel assemblies connected at the joints with small panel connectors (also called "post caps"), or narrow reveals that may be slotted to accept hang-on furniture. The base and ceiling runners and trims are installed separately, and run continuously; panels are moved as assembled units. Typically the panel units and connectors are provided in a factory baked enamel finish. Movable walls are used to displace conventional fixed walls in all types of layouts. The systems are completely engineered including several types of door units and glazed assemblies. Because of the modularity of the system, door and glazed units are typically interchangeable with solid panel units. Since the panels are moved as assembled units, these types of systems move very quickly and are ideal for locations that require weekend or over-a-vacation changes. Movable walls generally have respectable STC performance, in the 39-43 range. Because of their factory painted finish, they provide a great deal of abuse resistance. Accessibility into the wall cavity varies by manufacturer. Some provide excellent accessibility; others have virtually no access except at the cavity between adjoining units. Electrification is normally handled at the joint cavity, and may require special "slimline" electrical boxes depending on the thickness of the system. Unitized assemblies typically do not allow for split finishes -- panels have to be the same on both sides of the unit.
Collaborators Courtnay Walsh IWPR Group (Nana Wall) courtnay@iwprgroup.com Kwik-Wall Movable Wall Systems, Mark Wilson wilsonm@kwik-wall.com www.kwik-wall.com Shane Scribner, LEED GA | Marketing & Sales Gravity Lock Systems, Inc. | Commercial Interior Wall Systems T 800.945.2454 | www.gravitylock.com Jonathan Mosley for Style - moveable partition specialists M: 07939 158033 marketing@style-partitions.co.uk www.style-partitions.co.uk
Read more on this article at http://main.constructionreviewonline.com
19
Faux Tin Ceilings Tin ceilings have been around since the late 19th century. Originally a decorative and fireproof option to a plaster ceiling, tin ceilings have regained new popularity in recent years. Since a true tin ceiling, made of sheets of tin hammered into a design can be expensive, faux tin ceilings have begun to emerge. Among the options on offer, and the easiest for a homeowner to install is the faux tin wallpaper.
A ceiling style and covering add architectural and aesthetic qualities to the room. Ceiling styles and coverings can be combined to create a unique environment and accent the era and style of the home. High ceilings add a distinctly open feel to the room. Lower ceilings create a closer, cozier environment.
20
Those who want their home to be historically accurate will insist that there is no substitute for real tin ceilings. This design choice will give you the artistic and historic look of a real tin ceiling. There are tin ceiling panels that can be placed right over the existing ceiling for a quick and easy installation. Real tin will have to be primed so that the ceiling does not tarnish and you will find that there is a bit more work involved for these ceilings than faux materials. Many people will use tint on the tin ceilings to give them an antique look which can be very attractive in a period home. Faux tin ceiling tile is a great way to add to the attractiveness of your ceiling. The tiles simulate antique tin and come in various colors, patterns and finishes that will reflect nicely on you as well as your home.
Installing a faux tin ceiling can provide you with a number of benefits. However, there are also some drawbacks that you will need to be aware of. Here are some of the pros and cons of installing a faux tin ceiling. Pros One of the biggest advantages of this type of ceiling is the look that it provides. The look of a tin ceiling is very attractive and much sought after in the building industry today. It carries with it a very high-end look, so many people are going to enjoy it. If you are trying to sell your house, people will be drawn to this feature of the property. Another advantage of using a faux tin ceiling is that it can save you money. This is going to be much cheaper than actually installing tin ceiling tiles on the ceiling. Cons Although many people like the look of tin ceiling tiles, when you go with a faux finish, it may not look that realistic. Some of the faux finishes out there do not look like the real thing and people will be able to tell. Another potential problem with this type of finish is that it will require maintenance. Real tin is very
August 2011
durable and does not require much maintenance, but the faux tin ceiling may. Faux Tin Tiles now come in a wide variety of colors and finishes such as copper, brass, chrome, whites, mochas, burgundies, silvers and gold. Not only do they come in these great finishes, but they come in a variety of sizes like the 6 in. pattern, 12 in., 24 in., all the way up to about 6 ft. When it comes to cost, for the enhanced aesthetics to your ceiling, the savings compared to more expensive metal ceiling tile, and the ease of installation the faux tin ceiling tile depending upon the design and style you choose can be obtained for well under $10.00 dollars a 12” x 12” tile. Which might be very appealing, especially to the capable do-it-yourselfer. Faux tin ceiling tile comes in a variety of colors, styles and designs and when you figure in the cost and ease of use it certainly has advantages that you should consider. Better Than Tin Better Than Tin is a company whose tiles offer a high-quality finish rivaling the aesthetics and durability of historic tin tiles, but at much lower prices. The tiles are dent and kink-resistant, lightweight, and easy to install in suspended ceiling (pop-in) or direct-mount (glue-up) applications. They can be used in almost any residential application including living rooms, dining rooms, bedrooms, kitchens,
bathrooms, basements, dens, home theaters, converted garages and even covered patios. They are especially ideal for kitchens and bathrooms because they are not affected by moisture, are easily cleaned and do not harbor, dust, mold or odors. The tiles are available in twenty-two styles, and the come in three metallic finishes (Brushed Bronze, Brushed Copper, Brushed Pewter) and a paintable white. The tiles start at only $1.99 per square foot.
Collaborators 1 Better Than Tin Natasha Biasell www.betterthantin.com natasha@ivypublicrelations.com
Another company that supplies faux tin ceilings in the US is Ceilings By Us. They have many finishes, among them the copper metallic ceiling tiles and the Styrofoam ceiling tiles.
3 Wunderlite Reproduction Panels Sandy Press Contact Sandy@herbal-treatments.net www.wunderlite.com.au
In Australia, Wunderlite Pressed Metal and Pressed Tin Panels - in operation since 1980, create and reproduce the most popular pressed metal and faux tin designs used in Australia from the traditional late 1890's to the late 1930's period to contemporary modern day. Décor ceilings is a company that specializes in affordable Faux Tin Ceiling Tiles that can be glued onto existing ceilings. They also carry PVC Faux Tin Backsplash for the kitchen, bathroom, or anywhere in the home or office. All are products are very easy to install saving you time and money. Read more on this article at http://main.constructionreviewonline.com
2 Ceilings By Us Raya Deych Coral Springs, Florida 33071 www.ceilingtilesbyus.com ceilingtilesbyus@bellsouth.net
4 Decor Ceilings decorceilingsmail@gmail.com http://www.decorceilings.com 5 Ceilume David Condello david@ceilume.com www.ceilume.com 6 Chicago metallic MaryAnn and Tom E Smith SmithT@chicagometallic.com www.chicagometallic.com 7 Talissa Decor Vlad Nagolya info@talissadecor.com
Construction
NEW! and IMPROVED! with greater penetration...
Sika FerroGard -903+ ®
®
Active corrosion protection for both reinforced concrete structures with dual action effects Sika FerroGard-903+ is an aqueous impregnation which is applied to the concrete surface. It quickly penetrates the concrete by liquid and vapour diffusion. Sika FerroGard-903+ has a high affinity to steel and forms a protective film on the steel surface. This delays the onset of corrosion and the corrosion rate is considerably reduced without affecting the concrete properties.
A new class of surface applied corrosion inhibitors for reinforced concrete Sika Customer Service KZN: Tel 031 792 6500, Fax 031 700 1760 E-mail headoffice@za.sika.com Website www.sika.co.za
August 2011
Gauteng Tel: 011 608 6100 Western Cape Tel: 021 555 0755
Eastern Cape Tel: 041 453 2813 Zululand Tel: 035 797 3814
21
Z-15 Tower Beijing's Tallest New Building The Z-15 Tower is a skyscraper designed for CITIC Group in Beijing, China. The 500m-high mixed-use tower will surpass the 330m-tall China World Tower, the current tallest skyscraper in Beijing. It will have more than 120 storeys and about 300,000m² of floor area. The tower has been designed by TFP Farrells who were chosen through an international competition. The final design was unveiled in January 2011. Inspired by Chinese culture, the design forms an identity for the steady financial growth. The tower will be well connected to the adjacent shopping mall and existing metro station. Being close to the China WTC 3 and the CCTV Headquarters, it is expected to become an international iconic landmark in the country. CITIC purchased the Z-15 plot for RMB6.3bn ($956.6bn) through bidding process. It will spend about RMB10bn ($1.5bn) for the overall site development. Facilities The planned facilities of the Z-15 Tower include the headquarters of the CITIC Group; 60 floors of Grade-A office space; a 20 storey, 300 room, six star hotel with state-of- the-art facilities; 20 floors of serviced apartments; galleries and a roof garden. "The planned facilities of the Z-15 Tower include the headquarters of the CITIC Group." Design The Z-15 Tower will be built at the heart of the new Beijing Central Business District (CBD). It is part of the city's master plan to develop a green business district on a 30ha site in the east of Beijing. The CBD extension will include 2,000,000m² of office space, apartments, six-star hotels and retail facilities. Several regional high-rise offices are located on both sides of a central green axis that leads to the site. The Z-15 Tower, at the end of the axis, will create a unique urban morphology with a sequential rising skyline. A vertical pedestrian circulation system with three levels of circular walking will provide access to the city transit system, malls and offices, and external and internal public spaces via landscaped environment. The tower will have rounded square floorplates to maximise the floor area at the top levels. The top of the building will accommodate the hotel, restaurant and bar, with a threestorey-high shared atrium.
Structure The Z-15 Tower will be a sleek structure with a smooth contemporary vertical curve. The building will reduce in size from the bottom till the middle and gradually increase till it reaches the top. "The Z-15 Tower will be a sleek structure with a smooth contemporary vertical curve." The shape will create a hyperbolic architecture with a central slimming. It will enhance the structural stability of the building at the base. The central core of the tower will house the service spaces and vertical circulation systems. The rounded square floor plans allow reduction of wind loads on the building. A shear-wall core and a skew frame are provided for structural resistance against earthquakes and gravity, while creating an aesthetic appearance. Façade The transparent façade will have a fully glazed curtain wall. It will have a texture
of different rhombic layers, which will rise from the bottom of the tower to the top of the building in a particular pattern. Inspiration The design was inspired by the Zun, a wine vessel, which has a long tradition in Chinese ritual forms. The aspect of the design creating large spaces at the upper floors of the building was inspired by the Kong Ming Lanterns form. The façade's appearance was inspired by traditional Chinese utensils that are woven with bamboo. Sustainability The tower has been designed and oriented for optimum use of natural wind in summer and sunlight in winter. An energy system for district heating and cooling is also being planned. The building will consume about 20% to 40% less energy than a typical building of this kind. A green belt landscaping of trees and plants is planned for around the tower.
ADDIS BUILD Exhibition 2011 ADDIS BUILD exhibits the newest products, technology and trends in the construction industry. The 3rd ADDIS BUILD was held from May 11 – 14, 2011. (From left to right): Mr. Ali Riza Çolak –Turkey’s Ambassador to Ethiopia, Mr. Tadesse Haile - Minister of Trade and Industry, Ethiopia and Mr. Bilal Akkurt, Commercial Counselor at the opening of ADDIS BUILD DOKA - The Formwork Experts exhibition stand
Mr. Tadesse Haile - Minister of Trade and Industry, Ethiopia with exhibitors
Participants at a session during ADDIS BUILD
YAPI-TURKEYBUILD Istanbul YAPI-TURKEYBUILD Istanbul is the Turkish Building Industry’s Biggest Exhibition covering a wide geographic circle including the Balkan Region, Former CIS Countries, Russia, Middle East and North Africa. It was held on April 27 – May 1, 2011
Federal German Minister of Transport Building and Urban Development Dr Peter Ramsauer addresses the fair
YAPI -TURKEYBUILD Opening Ceremony
Winners of “Golden Magnet” Best Stand Mr. Mustafa Demir Prize, a traditional YAPI - TURKEYBUILD - Turkish Minister of Exhibitions prize Public Works and Settlement addresses the fair
Commissioning of Lafarge WAPCO Cement Nigeria power Plant
Left to right. Lafarge Cement WAPCO Nigeria Plc, Mr. Samy Abdelkader. The Executive Governor of Ogun State, Senator Ibikunle Amosu during the commissioning. The WAPCO Cement Plant. Guests during the launch
Guest
Construction and EngineeringCompanies at Risk with Poor Suppliers By Brian Peterson, industry analyst, Coface
By Brian Peterson, industry analyst, Coface
The credit risk of companies in construction and engineering could increase as a result of using unreliable suppliers. Reliable suppliers can be the catalyst for businesses to succeed through tough times. Resource suppliers are scarce, primarily due to the consolidation of companies. This is the result of the credit crisis. Resources, whatever they cover, from building materials to soft services, are becoming more expensive and limited in availability.
Always remember that a company is only as strong as its weakest link.
Related to the housing and construction industries, resource management such as having a reliable raw materials supplier is a key element in business credit worthiness, the company’s credit rating and its financial survival. It is fundamental for any project to source the correct product at the right price. Coface has observed throughout the credit crisis the risk and credit insurance implications of utilising poor suppliers and its knock-on effects.
The dependency of the sector on Government infrastructure projects has become a case of survival of the fittest as many companies are expecting to grab a slice from the R800-billion set aside, and it is a waiting game until these funds are rolled out. The turnaround period for tenders is currently estimated at 200 days.
This could mean that a construction company has a materials supplier delivering inferior products or services, such as delivering late or the wrong products. Poor quality or delivery delays can result in payments not being released by the principle. This can create a credit insurance implication for the construction company and lead to a cash flow problem. If the construction company is not paid, it in turn is unable to pay other suppliers who may proceed with legal action to recover outstanding moneys owing. This could tarnish the company’s credit insurance profile. It can create further problems. If the cash flow dries up and the company continues to incur overhead costs, it may not be able to pay its creditors at all.
Construction and Engineering – Companies at Risk with Poor Suppliers 24
As a result, the expenditure hole keeps getting bigger because no funding is available. The construction company’s reputation and trade information could be tarnished. In our business we find that certain construction companies are in this catch 22 situation. In essence, the selection of a sub-standard, unreliable product or service provider can turn a construction company from a good risk into a bad one. Coface’s advice for selecting correct resources is to develop a strong relationship with suppliers, understand their business, find out where they get their product from, does the quality compare favourably to the market benchmark and shop around. The cheapest may not be the best and most reliable.
Construction Industry Still in a Lull Currently, the construction industry is still in a lull with most companies posting a slump in their results. The fall in the civil construction confidence index to 21 in the first quarter of this year from 27 in the fourth quarter of last year is the lowest level in 11 years.
The first quarter of 2011 has shown a slightly positive development in activity compared to the previous quarter. Not all the marginal activity can be blamed on the companies involved in building materials contractors, the sector also depends on other inputs to ensure delivery of service. There has been a shortage of rebar (reinforcing steel) which is important in construction. This is further slowing recovery in the building and construction sector, according to the South African Reinforced Concrete Engineers Association (Sarcea). This is likely to cause further cost increases and time delays for both contractors and developers, making it a necessity to import larger quantities of the product to cope effectively with shortages and further resulting in smaller companies not being able to compete. Outlook for the sector: There have been strides made by certain companies with projects outside the South African boarders for example:Murray & Roberts has won a R4billion contract to build a hospital in Abu Dhabi, and Raubex, along with Sanyati, are currently in final negotiations for R720-million roads project in Uganda.
Read more on this article at http://main.constructionreviewonline.com
August 2011
Personality
Building Infrastructure for Posterity Engineer Ganiyu Abiodun Johnson is the Special Adviser on Works and Infrastructure to the Governor of Lagos State, Nigeria, Mr. Babatunde Fashola (SAN). By this position, he leads the Lagos State Ministry of Works and Infrastructures, the ministry which is the arrowhead and anchor of unprecedented infrastructural upgrade embarked upon by the state government towards making Lagos, one of the mega cities of the world. His appointment to this office, usually reserved for politicians, has been attributed to his sound engineering knowledge and competence. A technocrat with varied experience in his chosen career, Engineer Johnson was actually the Permanent Secretary in the Ministry between May 2003-to July 2007.Prior to this, he had served as the Permanent Secretary, Public Works Bureau between March 2000 –May 2003, an elevation from the position of the General Manager of the same Bureau he had earlier occupied between July 1999- March 2000. At the agency, he oversaw the general rehabilitation, maintenance and construction of over 300 roads within Lagos apart from replacing the mechanical weigh bridge in the state to an electronic one. He also increased the capacity of the strategic bitumen storage tank from 75 metric tons to 200 metric tons with dedicated 500KVA transformer and 500 KVA generating set dedicated to the plant to ensure continuous production and supply of the main material for road construction. Academic/professional background Engineer Ganiyu Johnson attended University of Southern California, Los Angeles, United States of America where he obtained Bachelor and Masters Degrees in Civil Engineering. He worked at Bechel Power Corporation, Norwalk, United State of America between 1980-1983 as Structural Engineer designing steel and concrete structures associated with nuclear power plants in Song 2& 3 in California, Korea 5 & 6 in Korea and Dablo- Canyon project in California. He returned to Nigeria to assume duty as Grade 1 Engineer with the Federal Ministry of Works and Housing with specific task of designing and supervising construction of bridges. In 1987,he August 2011
became a Principal Engineer in the Lagos State Civil Service, Assistant Chief Engineer(Head of Structure) in 1990-1995,Chief Engineer, Head of Construction 1993-1996 and Assistant Director, Head of Construction and Maintenance 19961998. He was appointed the General Manager, New Towns Development Authority with the mandate to actualize the internal reticulation of high brow Lekki Phase 1 and opening up of Isheri North Scheme among others. By this position, he was a member of the Land use and allocation committee.
Eng. Ganiyu Johnson
Achievements: His achievements as the Special Adviser on Works and Infrastructures include the construction of over 500 road projects and bridges, promotion of inter modal transportation system with construction of jetties and terminal buildings at Ipakodo (Ikorodu), Badore and Osborne. He also saw to the upgrading of some strategic roads including Dr. Nurudeen Olowopopo Avenue, construction of Itire-Okota Link Bridge, construction of Admiralty-Alexander Link Bridge, rehabilitation of Funsho Williams Avenue and Millennium pedestrian bridges and the reconstruction of Lagos-Badagry Expressway to 10-lane carriage way with BRT corridor and light rail among others. Awards Engineer Johnson is a recipient of Merit Award and Distinguished Service Award holder of the Nigerian Society of Engineers and the Nigerian Institute of Civil Engineers respectively. He also holds the Fellowship of the Nigerian Society of Engineers, Institute of Structural Engineers and the Nigerian Institute of Civil Engineers. He is a Member of American Society of Civil Engineers. Since 2003,he has been board member of strategic agencies in the state including, Lagos Metropolitan Area Transport Authority, State Consultancy Board, Lagos State Roads, Bridges and Highways Infrastructure, State Tenders board and Chairman Technical Committee of Material Testing Laboratory.
Eng. Ganiyu's achievements as the Special Adviser on Works and Infrastructures include the construction of over 500 road projects and bridges, promotion of inter modal transportation system with construction of jetties and terminal buildings at Ipakodo (Ikorodu), Badore and Osborne. 25
75 MUTHITHI ROAD, AVOCADO TOWERS, 2ND FLOOR, P.O BOX 1681 - 00606 NAIROBI, KENYA TEL: 254-020-2667010/1/2 FAX: 254-020-2667013 CELL: 254-702-964900
SOLAR HOT WATER SOLUTIONS FOR HOTELS, RESORTS AND BUSH CAMPS
For Design and Global Distribution support contact
solahart-africa@solahart.com.au Ph: +61 8 9351 4262 | Fax: +61 8 9351 4698
26
August 2011
CONTINENTAL CRANES
P.O. Box 64317-00620 Nairobi, Kenya Tel: 020-2103531 Mobile 0722 775433 Mobile 0734775433 Email: cranes@mail.com
DEALERS IN MOBILE CRANES AND CONSTRUCTION EQUIPMENT
www.miningtodayonline.com
www.ambriefonline.com Discover Africa’s Mineral Wealth and Resources
BROCHURE NOW AVAILABLE Agriculture e
13 – 16 September 2011 Luanda, Angola
Powerr
Accelerating Angola’s development through infrastructure partnerships Waterr
Pre-conference seminar & workshops Investmentt
Book now! Time is limited. Tuesday, 13 September 2011 • Transport and logistics - in orange • Through excellence, the meeting point between the • private sector and investment opportunities in Angola
VISA application closes 28 days before the event!
Transport & Logisticss Silver sponsor:
Host utility:
Media partner:
Mining g
Register online at www.angola.ipad-africa.com and quote sales code CR01 to benefit from this special offer. August 2011
27
MULTI-KONSULTS Ltd. Consulting Engineers & Technical Planners
The Board of Directors, Management & Staff of Multi-Konsults Ltd are proud to be associated with Mpanga Mini Hydro Development Project as the Electrical and Mechanical Engineering Consultants The Services provided included survey, design and supervision of the construction works for the Mpanga - Kahunge power line Interconnection for the evacuation of power from Mpanga Mini Hydro.
Plot 29, Clement Hill Road P.O. Box 5390 Kampla, UGANDA Tel: (256-414) 341321 Fax: (256-414) 232836 E-mail: mkvolts@imul.com, mkvolts@utlonline.com, multikonsults@multikonsults.com www.multikonsults.com
Goldstar, Uplifting The Construction Industry in Uganda
A
PROTECTION
VISION Your Insurer of Distinction, Renowned and Respected for Unequalled Customer Service Delivery
Heartfelt Congratulations to Mpanga Hydro Power Dam Commissioning in Kabeeza Village, Kamwenge District
Take Golden Protection for your Assets, Life and Pension
CRANE CHAMBERS, 6TH FLOOR, PLOT 38 KAMPALA ROAD, P. O. BOX 7781, KAMPALA - UGANDA TEL: +256-414-250110 / +256-414-250111 Fax: +256-414-254956 E-mail: goldstar@goldstarinsurance.com
Safeguard Strengthen Serve
Mpanga Hydro Power Plant licensed African EMS Mpanga Ltd, a local and private company to start off the project. Environmental protection South Asia Energy Management Systems in a drive towards environmental protection first acquired a certificate of approval from the National Environmental Management Authority (NEMA) in March 2007 before construction kicked off. This was the first major step which was followed by the hiring of Dr Kalema from Botany and Forestry Department in Makerere University. He worked together with another consultant from Sri lanka in the general environmental restoration in and the around the project site, but with much emphasis on the rare Cycad Encephalartos whytelockii to ensure its continuity by minimizing threats to its survival. Remarkable Features of the plant The Mpanga Hydro Power plant contains four major features and they include: Uganda
Mpanga Power Station is an 18 MW mini hydroelectric power project located on River Mpanga, in Kitagwenda County, Kamwenge District. The project harnesses the hydro potential of River Mpanga as it drops down over the Great Western Rift Valley into Lake George in Kasese district, in Western Uganda.
hydropower construction company. Having constructed more than 14 mini-hydro projects in Sri Lanka, VSHydro has extensive experience in the successful construction and operation of small-scale hydropower projects. VShydro is also an equity holder in a large portfolio of Sri Lanka projects.
The hydropower station is located approximately 24 kilometers, southwest of Kamwenge town. This location is approximately 383 kilometers, by road, West of Kampala, Uganda's capital and largest city.
Construction of the power station started in February 2008 was completed in February 2011. Technical commissioning was held on 10th February 2011, while the grand inauguration/ commissioning was held on 29th April 2011 and presided over by H.E. Gen. Yoweri Kaguta Museveni, President of the Republic of Uganda.
Overview The 18MW power station has been developed by Africa EMS Mpanga Ltd, and is the first one of its kind in Sub-African Region. Africa EMS Mpanga Ltd is a subsidiary of South Asia Energy Management Systems Inc. (SAEMS), a US based company whose headquarters are in California. South Asia Energy Management Systems Inc. was founded solely to develop renewable energy projects in Asia and Africa. In addition to the 18MW Mpanga project in Uganda, SAEMS owns 11 more hydropower projects in Sri Lanka. SAEMS has extensive corporate and international experience in all aspects of project management including engineering, financing, vendor procurement, project implementation, quality assurance and power generation asset management. The construction was undertaken by VSHydro (Pvt) Ltd; a Sri Lankan-based 30
Construction of the power station was undertaken by a Sri Lankan hydropower construction company called VS Hydro (Private) Limited, at an estimated cost of US$26 million. The 18MW are sold to the national grid and also distributed to local communities. This will contribute towards sufficient and reliable energy supply to over 20,000 households and business entities in the Western part of Uganda. The power will also boost industrialization in the region which includes cement, tea, cobalt and agro-processing industries. It will also light hospitals, schools and community trading centers among others. The generation plant, developed by the South Asia Energy Management System, is another success story of the Public Private Partnership. In 2008, the government of Uganda
Weir: This is the point where water is diverted from the river and made to flow through a constructed canal for a specified distance. In the case of Mpanga, the canal is approximately 1.6km Canal: This is a long channel constructed along the river through which the water flows into a collection tank called the Forebay. Fore bay tank: This is a huge concrete tank where water collects. Here, the water gains enough pressure and flows at a very high speed through huge pipes called penstocks, to turn the turbines. Power house: This is where generation is done. It is where the turbines, the generators and all the other relevant generation equipment are installed. From this point electricity is then transmitted. Mpanga project has 3 turbines each generating 6MW giving a total of 18MW. Impact of the power plant The power generated is sent to the national grid where it is rationed according to national demand, by UETCL. However, part of the power will be distributed in the various institutions within Kamwenge such as schools, health centers and trading centers. Because of availability of power, small and medium industries are expected to come up hence boosting trade in the district. Also various large categories of persons who will be August 2011
Mpanga Hydro Power Commissioned. or have been attracted in and around the area, will create market for several goods and services. There are now good access routes to Mpanga area and this has eased access and mobility of goods as well as services. The environment has fully been renewed with planting of more trees to replace those which were destroyed during the construction and more species of trees have been planted as well to create a greener cover. The place has now been beautified with variety of flowers and different kinds of grass.
Stake Holders Client/Developer South Asia Energy Management Systems Inc. (SA EMS) EPC contractor VSHydro (PVT) Ltd Ministry Ministry of Energy & Mineral Development (ME&MD) Regulator Electricity Regulatory Authority (ERA) Power Evacuation Line Rural Electrification Agency. (REA) Utility/Off-taker Uganda Electricity Transmission Company Ltd (UETCL)
His Excellency the President of Uganda, officially opened the Mpanga Hydropower Project, in the Kamwenge District in Apri 2011. The 18 MW Power plant, built at the best cost ratios and in the fastest time for a hydro plant in Uganda, is now fully operational following a successful technical commissioning from February. The facility has a peak capacity of 18MW with a design flow of 16m3/s and a hydraulic head of 135m, and will deliver an annual energy of 68 Million units. The Mpanga Project was developed by Africa EMS Mpanga Limited a subsidiary of South Asia Energy Management Systems Inc., a leading American Renewable Energy Development Company. Project debt was brought in by a European lending consortium comprising of FMO Bank, DEG, Finfund and the Emerging Africa Fund. South Asia Energy Management Systems Inc. was founded solely to develop renewable energy projects in Asia and Africa. In addition to the 18MW Mpanga project in Uganda, SAEMS owns 11 more hydropower projects in Sri Lanka. SAEMS has extensive corporate and international experience in all aspects of project management including engineering, financing, vendor procurement, project implementation, quality assurance and power generation asset management. The construction was undertaken by VSHydro (Pvt) Ltd; a Sri Lankan-based hydropower construction company. Having constructed
August 2011
more than 14 mini-hydro projects in Sri Lanka, VSHydro has extensive experience in the successful construction and operation of small-scale hydropower projects. VShydro is also an equity holder in a large portfolio of Sri Lanka projects. Six Ugandan companies worked as subcontractors and have received on site training in different aspects of hydro power project implementation. The project extended roads to five villages where only footpaths were the only means to reach many households. Agricultural produce is now collected directly from the houses of some of the residents. A football ground has been prepared for one the schools. Over 50,000 tree seedlings have been distributed to the communities. Over 200 local residents worked as casual labourers for the project. Some have picked skills that they are already applying in other parts of Uganda. A cycad nursery was setup to enhance survival of young cycads before replanting. This nursery has the largest young cycad population under special care in the world. In parallel to the project, the Rural Electrification Agency (REA) has carried out a large scale rural electrification program covering many villages in the Kamwenge district using the interconnection line from Mpanga. Thousands of village homes in the Kamwenge District shall henceforth enjoy electricity generated by the project. 31
Uganda
Materials used Most of the materials used were procured locally and others imported. The locally purchased include among others cement, iron bars, steel bars, iron sheets, aggregates and sand etc. Imported equipment such as the turbines, generators, wires and switches came from Sri lanka, Europe India and USA.
UHMG HO Building and Warehouse Ntinda, Uganda The building is elegant in its simplicity and carefully articulated details. The master plan ensures that any future development will result in the maximum utilization of the site creating a contemporary office complex Uganda
The new headquarters for Uganda Health Marketing Group (UHMG) are located in a suburb that is quickly being transformed from a residential to commercial area. The 1.5 acre swath of land is located along Martyr’s Crescent, Ntinda and is 10 minutes away from the city centre. The client commissioned Symbion Uganda Ltd to design a 3 storey executive office building and warehouse to support its expansion within the country. The project team proceeded to provide conceptual and detailed designs that included a master plan to cater for future expansion. As project managers / architects, Symbion guided the client through the procurement process and managed the contractors throughout from commencement to completion. The development was completed on 4th April 2011, after a nine month design and construction period.
contains a 530 m2. mezzanine level used for administrative offices. The simple steel frame and masonry in-fill walls allowed for ease of construction, while the simple finishes were appropriate for the primary use of the building as sorting and storage of products. Parking The two buildings of varying functions on site necessitated the provision of separate parking for the main office building (with 70no. bays) and for the ware house (with 20 no. bays). Both parking areas are accessed off the Martyrs’ Crescent Road . In so doing, there is minimum interruption between trucks and other vehicles.
HONDA HO H ON NDA ND DA DA LISTER L IS ST ST TER ER R
Its completion marks another successful accomplishment of a project team led by Symbion within the Ugandan built environment. The building is elegant in its simplicity and carefully articulated details. The master plan ensures that any future development will result in the maximum utilization of the site creating a contemporary office complex. PROJECT SCOPE The main components of this phase of the project on the one and a half acre site were: the main office building, the warehouse and the parking area. Main Office Building This block consists of three floors each covering an area of 600 m2. The client, UHMG, occupies part of the ground floor and the entire first floor, a total of 725 m2. The rest of the space on the ground and second floor, 790 m2., is available to let. Each floor contains the necessary amenities of easily-accessible circulation cores, spacious and well-finished ablution areas, and adequate electrical and mechanical fittings. The flat roof slab currently provides a lovely terrace viewing deck and allows for future development if so desired by the client. Warehouse The warehouse was the first structure to be completed on site. This double height space covered a gross ground floor area of 630 m2. It also 32
PERKINS P ER RK KINS S JOHN DEERE
BRUSHCUTTERS H HCUTTERS MOWERS PUMPS WELDERS POKE PO POKERS KERS RS
POWER FLOATS CO COMPACTORS COMPACT OMP MPAC ACT TORS T ORS ORS RAMMERS DRAIN RODS DS ROLLERS W EEL WHEEL WHEE L BARROWS BARRO BARR BAR BA RRO OW W MIXERS MIXE M MI XERS XE ERS
FIND US AND OUR ON N TTANK TAN ANK ANK K HI HILL HIL ILL ROA R ROAD OA
MUYENGA MOB: MO B:: ((0)772 B 0)77 0) )772 2 20 2009 200950/1 0950 095 50/1 50 5 /1 TEL: (0)414 266749/(0)312 260086 FAX: FA AX X:: ((0)414 0))41 0)41 0 414 4 26 2667 266749/(0)312 6749/( 6749 49/(0) /(0 /( 0)31 0) 0 )312 )31 312 6 600 60 60087 00 087 87 EMAIL: E EM M MAIL: AIL A AI IL: sales@terrainplant.com sal sales@t ales es@t @ter @terrai @t erra rainpl inplant plan ant. tt.co co om www.terrainp www.terrainplant.com www ww w te terrainpl i pllant ant nt.com t com August 2011
located within the building appendages freeing up the bulk of the floor for office utilization. FORM The office building has a simple cubic form from which portions are either subtracted to create entrance foyers or added to create serving spaces. In the main elevation, one side of the geometric form sits shy of the form creating layering effect. This effect is further heightened by the juxtaposing of alucobond with masonry finish. The angular nature of the building is accentuated by the brilliant white aluminium strips and slabs that jut out from the building edge. The cantilevered mild steel brackets along the parapet wall provides a sleek cap to the vertical scale of the building. MATERIALS Exterior The office block aesthetic is composed of bronze curtain walling juxtaposed with gray alucobond cladding and beige painted block- walls. These three elements interplay on various scales and quantities resulting in clear primary and secondary elevations. The steel fins on top further strengthen the primary façade.
SERVICES AND FACILITIES The office building is fitted with air-conditioning in the office spaces. There is lift substructure in place for future development. Firefighting equipment has been provided and includes: smoke detectors, fire hose reels, extinguishers, fire blankets, dry risers and a fire hydrant. The inconsistent power supply is countered by the provision of a 150KVA standby generator. Security measures have been considered in the use of CCTV and controlling access along the site perimeter. The buildings are also made universally accessible by the provision of ramps and disabled toilets. CHALLENGES FACED One of the challenges faced was the resolution of the site boundaries. An erroneous survey carried out earlier revealed discrepencies once works had commenced on site. This was resolved through discussions and agreements with the neighbours. Another challenge faced was the number of changes made by the client during the post-contract stage of the project. These changes brought about budgetary and time strains on the project. However with prompt and clear communication, the project team was able to meet the client needs without major impact to the project contract and program. The delayed procurement of some of the project materials by the contractor presented the third challenge. With the emphasis on the approval of samples as early as possible, the project manager was able to mitigate further delays and ensure the completion of the project on time.
We are proud to be the Electrical sub-contractor for the Project Office Block for Uganda Health Marketing Group (UHMG) at Ntinda
Uganda
Kenya
Plot 932 Block 208 Bwaise, P.O. Box 7715, Kampala - Uganda Tel: +256-414 566020/30 Fax: +256-414 566040 Email: info.ug@masterpowers.com
P.O. Box 976 - 00606 Sarit Centre, Nairobi,Kenya Tel: 3756381 / 3757381 Fax: 3756280 Email: info@masterpowers.com
August 2011
Project Team Client: Architects and project managers: Quantity Surveyors: Structural & Civil Engineer: Electrical & Mechanical Engineers: Main Contractor: Mechanical Subcontractors: Electrical Subcontractors: Aluminium Cladding and Curtainwalling: Air-conditioning:
Uganda Health Marketing Group (UHMG). Symbion Uganda Ltd. Buildcost Associates. Infrastructural Projects Ltd. Multi-Konsults Ltd. Seyani International Co. Ltd. Allied Plumbers Master power Systems Premier Engineering Ltd. Thermocool. 33
Uganda
LAYOUT The building blocks are laid out on a north-south axis to aid solar control. The position of both the present and future office blocks creates an open parking forecourt and conceals the warehouse at the back of the site. The position of the warehouse adjacent to one of the blocks frames the secondary delivery court adequately sized to allow for a loading and off-loading bay. The landscaped infill-spaces provide a soft green buffer between the existing and future blocks. Within the office building, the core contains curved walls and circular spaces around the meeting areas. These are flanked by openplan office spaces with adequate natural light and ventilation. The serving spaces such as staircases, ablutions, cleaner’s rooms and tearooms are
Interiors The Beige color theme provides the basis of the earth-toned finishes throughout the interior. These finishes include the brown and cream polished porcelain floor and wall tiles; powder coated aluminium partitioning and cherry oak veneered doors and fittings. The sharp contrast of the blue carpet tiles and dropped ceilings in the main meeting areas announces these spaces as special. These finishes provide a calm conducive working environment appropriate for the function of the building.
Uganda 34
August 2011
Uganda August 2011
35
Uganda 36
August 2011
Uganda August 2011
37
JESANI CONSTRUCTION LTD. Building and Civil Engineering contractors and Building Material Suppliers
Rutungu Investments Limited At Nakasero Plot 5
Pearl Estates Limited At Lubowa We are proud to be associated with GEM ENGINEERING
Uganda
Plot 923, Kyadondo Block-208, Mutumba II - Wakiso-Bwaise P.O. Box 72660, Kampala-Uganda. Tel: 0414-568839 / 0312-265912 Fax: 0414-566019, Email: jesaniconstruction@yahoo.com
AIR CONDITIONING
REFRIGERATION
VENTILATION
THERMOCOOL UGANDA’S ONLY AUTHORISED
dealer
in Now a!! nd Rwa
Specialists in commercial and residential air conditioning, VRV systems, water chillers and ventilation systems. From design and installation to maintenance and repairs. Find out how our stellar reputation in the following successful projects can work for you. Orient Bank
I Nakumatt Supermarket rket Uganda I Nyonyi Gardens I British High Commission I DFID Offices
Warid Telecom
be cool. We are proud to be associated with GEM ENGINEERING as the Air Conditioning and Ventilation Contractor.
info@thermocool.co.ug , TEL: +256 0414-255915, 0312 263711. FAX: 0414 254510 PLOT 15/17 2ND STREET INDUSTRIAL AREA, P.O. BOX 31542 KAMPALA, UGANDA. RWANDA KIGALI OFFICE, P.O. 4113, KIGALI, TEL: +250 785 750206.
38
1 August 2011
VOICE - DATA - ALARMS
infosys (Uganda)Ltd Plot 818, Turfnel Driver (Kamwokya) P.O. Box 4263 Kampala - Uganda Tel/Fax: +256 (0) 414 541305 Mobile: +256 (0) 772 432766 email: admin@infosys.co.ug
We are proud to be associated with GEM Engineering Co. Ltd.
We are proud to be associated with GEM Engineering
We are proud to be associated with GEM Engineering Co. Ltd in the electrical
Installation works for warid Msc in Bugolobi Plot No. 2527, Kiwatule Road. Ntinda P.O. Box 12536,Kampala - Uganda Tel: 0414 - 286390 / 0414 - 287874, Fax: 0414 - 287167 Email: stema@utlonline.co.ug
Uganda
Design, supply & professional installers of: SMATV Central antenna and satellite signal distribution network ALARMS/CCTV Fire, Intrusion & Surveillence Cameras. AUDIO Piped Music installation for hotels. P.A. installations for conference centres. Central audio distribution systems for residential and professional applications. STRUCTURED CABLING Voice and data. NETWORKING Wireless LANs and Hots pots. for Hotels, Apartments and Corporate Installation
MARRYATS EAST AFRICA Ltd Lifts and Escalators
Plot 7-9 Yokana Road, Bugolobi, Kampala PO Box 10927 Kampala, Uganda. Office Mobile: +256 (0)312 370 855/56 Office Fax: +256 (0) 414 348 758 Email: Joanne@marryatandscott.com
LOURDEL (MANDELA)
MARRYATS EAST AFRICA takes this opportunity to congratulate GEM Engineering Company Ltd having achieved their ISO Certificate MARRYATS EAST AFRICA are proudly associated with GEM Engineering Company Ltd being the sole suppliers of the world class state of the art KONE Lifts and Escalators in East Africa
August 2011
KCB BANK
HILL LAND - KOLOLO
We are proud to be associated with GEM ENGINEERING CO. LTD as the Electrical sub-contractor for the various Projects Uganda
Kenya
Plot 932 Block 208 Bwaise, P.O. Box 7715, Kampala - Uganda Tel: +256-414 566020/30 Fax: +256-414 566040 Email: info.ug@masterpowers.com
P.O. Box 976 - 00606 Sarit Centre, Nairobi,Kenya Tel: 3756381 / 3757381 Fax: 3756280 Email: info@masterpowers.com
39
Interface Consulting Ltd Consulting | Research | Project Management
We congratulate GEM Engineering Co. Limited on this great Achievement and are proud to be associated with them particularly on the Africa Development Bank funded project being executed by the Government of Uganda, Ministry of Local
Government;
Markets
and
Agricultural
Trade
Improvement Project (MATIP-1).
Our Services:
Infrastructure, Systems Design and Management
Research
Project Management
Consulting
Plot 64, Kanjokya
Tel: +256 312263610
Street, Kololo.
Fax: +256312262434
P.O.Box 24701,
Email: interface@interface.co.ug
Kampala, Uganda Uganda
EU L
ENERGY UTILIZATION (UGANDA) LTD.
Civil, Electrical, Mechanical Engineers & Contractors DESIGNERS & CONTRACTORS IN Air conditioning, Refrigeration & Mechanical Ventilation
NEW UBC STUDIO COMPLEX
We are Dealers in:-
Proud to be associated with GEM Engineering Company Ltd Plot 519, Old Kiira Rod Kamwokya P.O.Box 7439 Kampala, Uganda 40
Tel: (256-414) - 340051 (256) 752 - 340051 Fax: (256-414) - 340070 E-mail: airmac@dmail.ug
Installation of Main Switch Board at UBC
We are proud to be Associated with GEM ENGINEERING as Electrical Contractors
Plot 23 Ntinda Rd. P.O. Box 5572, Kampala - Uganda Mob. Tel: 0774 130123 / 0774 175479 / 0773 045691 Tel. / Fax 256 041 2576867 Email: energy@utlonline.co.ug August 2011
PSPF House
Background Public Service Pensions Fund is a parastatal financial institution formed by act of parliament of the United Republic of Tanzania. It serves as investment organization for government employees and pensioners. PSPF required a modern building to house their organization as well as investment entity.They called for pre-qualification of consulting firms were shortlisted for bidding purposes.Public Procurement regulations were used to secure consultants of the proposed project. Habconsult Ltd as leading consultant and Project Managers in association with Inhouse Projects Ltd won the Technical and Financial Proposals submitted as per procedures stipulated by National laws of procurement. Design concept and Schedule of Areas The design concept is based in amalgamating contemporary architecture and intelligent built up environment to focus in achieving aesthetic appeal as well capital returns of the investment.The project is situated along Ohio/Kibo Streets at the CBD of Dar es salaam-Tanzania. Its an ideal place for offices, shopping malls, banking and hotel. The project consist of Two distinctive towers of different heights in order to get maximum view of the ocean front and a park house at the rear which shall also have a conference centre of International standards.
Tanzania
The project is principally divided in to two main parts – the parking block and the main office block. The parking block, which is located behind the main office block, has a total built up area of about 16,000 m2 which is broken down into eight floor levels (ground floor to seventh floor), each floor having an average of 1,800 m2. About 40% of ground floor area is dedicated to utility zone - stand by generators, electrical room, fuel tanks, etc. are all strategically positioned in this area. The remaining 60% or so is rented out for offices and shops. Car parks occupy first to fifth floors, with each floor having 50 parking slots, bringing up a total of 300 car parking slots. The main office block, on the other hand covers a total of about 40,300m2 which is distributed among the 24 floor levels. This block is also divided in to two parts
DAR ES SALAAM GLASS WORKS LIMITED Specialist in: Alluminium Doors, Windows, Partitions, Curtain wall, Toughened doors, Fascia with spider system, Glass balustrade, vertical blinds, ceiling, Gladding, Sunbreakers, Structural Glazing, Cladding, Stud partitions, Sun and allied products
Factory: Mikocheni Industrial Area, Near Academic International School. Tel: + 255 22 2780904/ 2780905, Fax: +255 22 2781054 Contacts Head Quarter& Sales Office: Behind Tansoma Hotel P.O. Box 253 Dar es salaam, Tanzania Tel:+ 255 22 2181419 Fax: 255 22 2182847 Mob: + 255 784 786235 Email: darglass@yahoo.com/darglass@raha.com
42
AUTHORISED REPRESENTATIVE OF: HUNTER DOUGLAS-LUXALON PRODUCTS, ALICO LTD-SHARJAH PRIME STRUCTURE ENGINEERING, SINGAPORE SKYLIGHTS AND SPACEFRAME ALUMINIUM GROUP-ITALY
August 2011
– the short tower at the front and the main tower. The two towers are separated by a large atrium which is sun roofed at the fifth floor level. Both towers start as one single tower from ground floor level to 13th floor level where the short tower terminates living the main tower to proceed to 22nd floor and the roof. The ground floor level, which is occupied by banks, has about 2,800 m2. This includes the atrium which is mainly public.The mezzanine floor which is also occupied by the same banks in the round floor covers about 1,880 m2. First to fourth floor levels, each occupies about 2,340 m2 where as fifth to thirteenth floors each covers 1,870 m2.Fourteenth to twentieth floors, which are in the main tower, cover 1,130 m2 each. Twenty first floor level which hosts the prestigious revolving restaurant covers 1,033 m2 which is also double volume in part. Finally the twenty second floor level covers only 439 m2. Standing out Features: One of the most outstanding feature of the building is the revolving Restaurant.This is the centre of attraction and one focal point of actually viewing the whole of Dar es salaam city centre at vantage point.Other features includes banking halls with access to mezzanine floor and ample parking space for tenants. Materials used Basically most of the materials used in this building were obtained locally. Materials like cement, sand, aggregate, reinforcement bars, etc were supplied by local suppliers. These materials, though, were finely selected and approved to ensure best quality results as well as durability.
JANDU CONSTRUCTION & PLUMBERS LIMITED Buguruni Kisiwani, P.O. Box 7541, Dar es Salaam, Tanzania Tel: 255 22 2861509/ 10, Fax: 255 22 28633818, Email: janduconstruction@hotmail.com
Tanzania
Other materials, mostly the finishing materials were imported from
JANDU
The Royale orchard Inn Residential complex along Chimala road
Proud to be associated with Estim Construction in the PSPF House Project
Amani Towers along Ohio street
Construction and Management Services: Specialist Contractors for Plumbing, Drainage, Fire Fighting, Sprinkler System, Steams and Allied Mechanical Services August 2011
43
different countries in Europe and Asia. In order to make the building contemporary and to meet modern demands and requirement, materials such as glazing, aluminium frames,ACP Cladding granite tiles and porcelain tiles were all imported. Services: The project proud itself of ample supply of power by acquiring stand by generators, and solar panels for hot water supply to kitchens and toilets. Chiller System is used for Air Conditioning of the buildings. Data/Telecommunication System: The building shall have the latest and most economical data and telecommunication system that earmarks its uniqueness in terms of efficiency and its ability to provide secure parameters.
Client: Public Service Pensions Fund Architects: Habconsult Ltd. In Association with Inhouse Projects Ltd Main Contractor: Estim Construction Company Ltd
Civil and Structural Engineers: Tanconsult Ltd Electrical/Mechnical and IT Engineers: Electriplan (T) Ltd.
CTT
中国重卡(坦桑尼 )有限公司 CHINA TRUCK ( T ) LTD PLOT NO.96 Mandela Road, Dar Es Salaam, Tanzania P.O. BOX 23198 Tel: +255-763641126 E-mail: yzjtansang@chinatruck.com
CHINA TRUCK (T) LTD mainly sell SINOTUCK HOWO series, which include: various tipper trucks, tractor trucks, semi-trailers,cargo trucks, concrete mixer trucks, bulk cement tankers, water tankers, fuel tankers, fire fighting trucks, other specialized vehicles, machinery, bus, pick-ups etc, and their spare parts. CHINA TRUCK (T) LTD has exported nearly 3000 units heavy duty trucks to Tanzania, Kenya, Uganda, Mozambique, D. R. Congo and other countries. Further, we provide good technical services and sufficient spare parts efficiently to our overseas customers.
The Club
GAUTENG Tel: 014 576 1925 Fax: 014 576 1038 WESTERN CAPE Tel: 021 975 8125 Fax 021 979 5430 POSTAL P. O. 267 Hekpoort 1790 EMAIL: info@greenacreslandscapes.co.za WEB: www.greenacreslandscapes.co.za
For developers a bankable investment, in the mist of economic recession, seems to be mixed-use developments. With its varied use, such developments tend to constantly attract business investors, tenants or patrons. Tshwane’s (Pretoria) newest addition to these developments is—The Club Project Team Client Atterbury Property Architect The Design Partnership Quantity Surveyor Storm Sciocatti South Africa
Structural Engineer DG Consulting Engineers Electrical Engineer Rawlins Whales & Partners Mechanical Engineer Q-Mech Consulting Engineers Electrical Consultant DC Electrical Main Contractor WBHO Very few mixed-use developments are constructed in a single undertaking, as many developers rather test the market’s response through a phased development. This fact holds true for The Club. The first phase is an office development, also named The Club, is a 4,500m2 block with 4 office levels, one ground floor retail level and a triple volume basement parking component. Developed by Atterbury Property, the development’s site was previously neglected land within the residential node of Hazelwood, between Waterkloof and Brooklyn suburbs. In developing the first phase, Atterbury sought an iconic building that would set the tone for the remaining phases of overall mixed-use development. Phase one is scheduled to go live in July 2011. Set on a triangular site the building’s design, spearheaded by The Design Partnership, was immensely influenced by site restrictions and the 46
sustainable energy principles incorporated into the building. Nestled between the Pretoria Country Club and the new Garsfontein N1 highway off ramp, space was extremely limited. Space was so restricted that typical landscaping that usually bounds the perimeter of developments, could not be executed with The Club. Its placement called for more innovative measures. “On the retail area’s roof we decided to lift the landscaping up and create concrete roofs over the outside area and put the landscaping on the building roof,” says Franzua Lotter of The Design Partnership. In order to maximise energy usage a number of solutions were implemented, including use of LED lights for energy cost-effectiveness as well as shaded glazing and controlled louvers to minimise
excessive heat gain, while reducing reliance on energy consumptive air-conditioning systems. Recognising that HVAC systems are consumptive in terms of energy use and cost, a cost-effective method was installed by mechanical engineers, Q-Mech. The Thermal Energy Storage (TES) provides partial ice storage, by doing so the HP chiller offers energy-efficient heating during cold winters. Standing at the corner of Brooklyn and Albert streets, one can tell that this impressive building represents just the beginning of something very special and defining in the area. Additional office developments and a 12,000m2 shopping centre will complete The Club mixed-use development in 2012/2013.
August 2011
South Africa
7(1'(5 $/(576 To Subscribe, Logon to: www.constructionreviewonline.com August 2011
47
Dikgatlhong Dam Construction Reaches Critical Stage The contract for the construction of Botswana’s biggest dam enters its 39th month on programme, for scheduled completion in February 2012. South Africa
The current dry season’s activities are focused on the critical closure of a diversion channel purposefully left in the earth embankment to allow the previous season’s river flows to pass through whilst the dam was extended across the Shashe River. The 200m wide ogee crested spillway is also in an advanced stage of construction and final closure of the diversion and spillway section by October this year will see impoundment of the next wet season’s rains.
1.4 billion, is being funded by the Botswana Government. Construction is by Sinohydro Corporation from China and the technical design and contract administration and site supervision aspects are being undertaken by a joint venture partnership between Bergstan Africa, a Botswana based company and Jeffares & Green from South Africa.
The earth embankment dam is located in North-eastern Botswana about 3km below the confluence of the Tati and Shashe Rivers. At full supply level storage volume will be close to 400 million cubic metres with a backwater reach of about 20 kilometres up river. This will be Botswana’s largest water supply dam.
South African suppliers have provided steel plate for the outlet conduit, reinforcing steel, as well as the main outlet cone/sleeve and butterfly ranging from 300mm to 2.6 metres diameter. The cement was supplied by PPC Cement in Botswana. Subcontractor Geomechanics also undertook some core drilling and lugeon testing in the early stages of the project before Sinohydro mobilized their own drilling teams.
Transfer Pumping Station and Pipeline Work is also due to commence shortly to construct a large raw water pumping station and a 73 km long 1200 mm diameter welded steel pipeline, which will transfer water from the dam to connect with the existing national water carrier pipeline. From there, the raw water will be conveyed southwards to the capital of Gaborone, as well as serving settlements, new coalfields, and a proposed power station en route, via a second, still to be constructed, North-South carrier pipeline. Project Team and South African Content The project implementation by the Botswana Department of Water Affairs, at a cost of Rand
Challenges Overcome The 4.5km long by 41m high earthfill embankment required nearly 4 million cubic metres of materials for its construction, including crushed rock aggregates, gravel fill, sand and gravel filters and clay core. These have all been sourced on site following extensive geotechnical investigations and reconnaissance. The concrete for the construction of the spillway and intake tower is also manufactured on the site using the quarry sources identified above. The foundation geology was highly variable and required a multi-stage grout curtain totaling 58 kilometres in length and requiring the pressure grouting of 6 700 tonnes of cement to seal it against leakage.
48
Direct : +27 33 343 6820 Tel: +27 33 343 6700 Fax: +27 33 343 6701 Cell: +27 83 289 1806 Email : pepperella@jgi.co.za Web: http://www.jgi.co.za 6 Pin Oak Avenue, Hilton, Pietermaritzburg, 3201, South Africa
The construction of a project of this magnitude in a remote part of Botswana presented a number of challenges to the construction and supervisory teams, including the language barrier and sometimes differing perceptions of construction practices, but these have been professionally dealt with and overcome. In addition, the works also suffered extensive damage caused by an unseasonal flood during the 2009 dry season. Another challenge was the poor and variable foundation geology and a paucity of good quality clay core materials. However, ongoing perseverance and dedication by all appears to be drawing the curtain on a project that is headed towards a successive conclusion, on time and on budget.
Client Botswana Department of Water Affairs Main contractor Sinohydro Corporation (China) Technical Design (Joint Venture) Contract Administration Site Supervision Bergstan Africa (Botswana) Jeffares & Green (South Africa) August 2011
OUR STRENGTH, YOUR VISION.
Bridging The Gap
South Africa
Soweto has recently experienced tremendous growth through new infrastructure designed to improve the quality of residents’ lives. From new public spaces, malls, theatres, road development and a public transportation system, soweto is being transformed. The new heroes bridge is a significant part of that transformation that is bridging the gap between the historic and the modern. Project Team Client City of Joburg Property Company (Pty) Ltd Architect Mpethi Morojele Engineer Hlanganani Engineers and Project Managers (Pty) Ltd Project Manager City of Joburg Property Company (Pty) Ltd Main Contractor Civilcon
50
The completion of the R46 million (US$6.7million) Orlando Heroes Bridge marks a pivotal step in the development of the Orlando Ekhaya precinct. Just 25km from Sandton City and 22km from OR Tambo Airport, the overall R1billion (US$145million) project aims to develop a worldclass waterfront park, 3,000m2 of new retail shop space, 14,000m2 of office space, 60ha of open space and conservation development, as well as 14,000m2 of stylish residential components. In addition, famous landmarks such as the Orlando power station and cooling towers and the University of Johannesburg’s Soweto campus will undergo redevelopment in an attempt to refurbish the general look and feel of the area. The development will in essence provide a wide variety of entertainment and leisure activities and upon completion, the mixed-use development which is possibly one of the largest being considered in South Africa, will transform the Orlando precinct into one of the country’s most vibrant and sought after destinations for investment, business and tourism. The 130m long iconic structure spans the outflow of the Orlando Dam and also offers scenic views of both the Orlando Dam and the Orlando eKhaya precinct. In addition, it now links the suburbs of Orlando and Klipspruit, which were historically separated by the Orlando power station compound and in doing so will not only stitch the two communities
together, but it will also cater to the region’s fast growing transport network. The bridge, roadway, and nearby cross street are named in honour of local community heroes, Kingsley Sithole and Basil Zuma and also pays tribute to the ordinary everyday heroes of Soweto. One of the standout features reflected on the bridge is the innovative artwork and design by architect/artist Mphethi Morojele who, inspired by the themes of power and nature in the district, highlighted the power of ordinary people and natural forms. His work is world-class contemporary sculptural form integrated into the lighting of the bridge and road. From an economic standpoint, the completed project is set to attract new private sector investment and development into Orlando and Klipspruit by making the areas more accessible. Furthermore, the project has already created over 100 new jobs for members of the local community and in addition over R6 Million (US$870,000) of the contract value has been spent on local subcontractors and suppliers. The Orlando eKhaya development is a key growth node that cannot be underestimated. For many years Soweto has been the face of the South African struggle, however, it is initiatives such as the Orlando eKhaya Precinct , a previously neglected zone that once housed the Orlando Power Station (which only catered for the City of Johannesburg and not Soweto), that are gradually transforming the face of Soweto into a buzzing, modern and trendsetting metropolis.
August 2011
Redirecting Commuters Easily in Kwa-Zulu Natal Getting around swiftly and efficiently in Kwa-Zulu Natal (KZN) is speeding up the development of two major interchange upgrade projects along some of the province’s busiest motorways. CHOTA MOTALA The need to reduce commuters’ journey time to and from the north-eastern areas of the city and minimise queue lengths on the N3 during peak hours, necessitated the Chota Motala Interchange. Jointly funded by SANRAL (South African National Roads Agency Limited) and the Msunduzi Municipality, this interchange project will include road widening, separating barrier, surface repair and upgrades as well as new interchange ramps. The project commenced in March 2010 and is scheduled for completion in November 2012. Upon completion of the project, the N3 leading to and from the interchange area will be widened, from its current two-lanes, to a four-lane dual carriageway. With increased lanes, comes increased traffic and speeds, so the need to further ensure road safety naturally followed. The construction of permanent New Jersey concrete median barriers, separating the north and south bound carriageways, are being built. A new interchange ramp is being constructed to ferry traffic on Chota Motala Road, from the eastern areas, onto the northbound carriageway of the N3. This ramp will direct traffic via a curved incrementally launched bridge, over the new widened Chota Motala bridge (that runs over the N3), to tie in with the N3 northbound carriageway. This specialised approach will create the first multiple-level road interchange or ‘flyover’ the city has witnessed. In addition to widening of Chota Motala bridge, the Dorpspruit River bridge will also be widened. Chota Motala Road will also be widened from single lanes running in each direction,
into a triple-lane dual carriageway. All existing roads in this project including Chota Motala Rd and the N3 lanes will be repaired and resurfaced. Inanda Interchange The Inanda Interchange is in the early phases of its construction, as the project recently commenced in March this year with a scheduled completion only in September 2013. Located at the intersection of the N2 and M19 (Quarry Rd) in the Durban Metro Municipality, this interchange will have two main directional ramps; one carrying traffic from the N2 (Southbound) to the M19 (Eastbound), the other from the M19 (Eastbound) to the N2 (Northbound). In the successful execution of this much needed interchange will be various ramps, commuter bridges, directional loops and pedestrian bridges. Funded by SANRAL and eThekwini Metro Municipality, the project was identified during the design of a recently completed project in the area. Goba, the consulting engineers, were charged with all the design work. One of the special road designs is converting the current bi-level interchange into a four-level interchange This interchange will have substantial aesthetic, yet functional structures that will add to its appeal. To minimise disruptions to traffic on the very busy N2, the main bridges of the directional ramps will be constructed by a highly specialised bridgelaunching technique. As with most major interchange or road construction projects, the main benefit is substantial relief of congestion during peak hours. An added positive outcome with the Inanda Interchange, is that it will become one of Durban’s landmark road features, just as the E.B. Cloete Interchange has been for years.
Highway interchanges within the Greater Durban area are in the process of being improved, alleviating traffic congestion & motorists’ headaches, while facilitating freeflowing traffic Project Team Chota Motala Interchange Client SANRAL Civil Engineer (joint venture) Iliso Aurecon Main Contractor (joint venture) Group 5 Phambili Inanda Interchange Client SANRAL Civil Engineer GOBA Consulting Engineers Main Contractor (joint venture) Rumdel Cape Rumdel Holdings Mazcon
South Africa
Innovation steals the show at Fulton Awards for Concrete Excellence This biannual award ceremony celebrates excellence and innovation in the application of concrete. The event was held on 4 June 2011 in Drakensberg at the Champagne Sports Resort and sponsored by the Concrete Society of Southern Africa (CSSA) and the Cement & Concrete Institute (C&CI). Bramley & Associates cc Adding Value through Expertise FIRE PROTECTION CONSULTANTS
CAPE TOWN Tel: (021) 462-4960 Email: bramley@iafrica.com Often copied but Never Surpassed
The Blackburn Pedestrian Bridge in KZN, and the Ubuntu Education Centre in Port Elizabeth, were awarded respective top honours in the coveted Civil Engineering and Building categories of the 2011 Fulton Awards for excellence in the application of concrete. The Fulton Awards winners were announced at a gala function at the Champagne Sports Resort in the Drakensberg on June 4.
“This remarkable structure provides the local people of Blackburn, Durban with a new, safe route to work, as well as lifestyle opportunities in the nearby Umhlanga New Town Centre. “Blackburn Pedestrian Bridge is one of the longest cable-stayed pedestrian bridges in Africa, and we were impressed by the careful attention to design and detail which was necessary due to the uniquely-shaped pylon”.
The prestigious awards are made every two years by the Concrete Society of Southern Africa (CSSA) with the Cement & Concrete Institute (C&CI) as anchor sponsor. Thirty-one major projects competed in the 2011 Fulton Awards’ six categories: Civil Engineering, Building, Concrete in Architecture, Unique Design Aspects, ConstructionTechniques and Innovative Technologies.
“The high quality finish was achieved from the exposed ‘durability’ class concrete which results in the minimum of maintenance being required during its life-cycle. Concrete was also chosen as the construction material for the two kilometres of associated walkway between Blackburn Village and Umhlanga”.
The Ubuntu Education Centre in Port Elizabeth won both the Building and Concrete in Architecture categories, with the Hospital Bend Preselection overpass road bridges in Cape Town being declared winner of the Construction Techniques category. Mountain House Roofs, also in Cape Town, won the Unique Design Aspects category. 15 Alice Lane in Sandton won the Innovative Technologies award. Civil Engineering category winner, the Blackburn Pedestrian Bridge near Umhlanga, was submitted by SSI Engineers and Environmental Consultants. In their citation, the competition judges said:
56
“The towering pylon and fanning stays of the bridge now highlight the capabilities of civil engineering and construction in South Africa”, the citation states. Ubuntu Education Centre in Zwide Township, submitted by John Blair Architects in association with Nongonyama Okpanume HewittColeman Architects, brought two Fulton Awards to Port Elizabeth. In awarding the prestigious Building Category award to the project, the judges noted that the entry “ticked so many boxes in the judging criteria”. “Concrete was chosen by the client to satisfy his brief of a building of permanence which makes a statement in the surrounding context. Aspects of ‘green building’ techniques were used, and the building utilises the thermal mass of its thick concrete walls and roof to radiate heat back August 2011
The Centre was also successful in the Concrete in Architecture category. Here the judges were very impressed with the use of off-shutter concrete as main element of the building, which provided a continuity of finish and form that met the design intent. “Reinforced concrete has been used as the principle building material for walls, floors and roofs to the project. A smooth off-shutter finish to the concrete has been used aesthetically for all external faces, and this finish has been carried through with good effect to the main interior walls. This provides the structure with a strong feeling of ethnicity “The concrete structure provides a sense of permanence and durability. The exposed concrete finish provides the necessary visual continuity to the folded slabs - which form both the walls and roofs - and to the complex supportive forms which are the basis of the design,” the citation states. The winner of the Unique Design Aspects category, a residential property at the foot of Table Mountain was submitted by architects, Hulme & Associates. The judges felt that the roofs of the property showcased concrete in a “very special and unique way”. Their citation says: “The organic shapes chosen for the roofs aid the house to blend harmoniously into the mountain backdrop. These also allowed unique views of the mountain, when seen from the inside, to be ‘framed’ with raised sections of the roofs – a very well thoughtout concept. The choice of concrete for the roofs shows perfectly its versatility, structural capacity, durability and aesthethic qualities.”
materials to not only improve resistance to marine conditions, but also reduce effective carbon emissions,” the citation concludes. Finally, 15 Alice Lane Towers in Sandton won the Innovative Technologies award for Sotiralis Consulting Engineers. “Concrete technology played a large part in bringing its various benefits directly to bear on the correct elements in the project. “The externally visible architectural form or silhouette of the building is that of two towers whose north and south faces are defined by irregular curves, resulting in a canyon-like atrium space between the two towers. This atrium space is about six metres wide at its lowest point, and eleven metres wide at its widest. The dramatic vertical space that results is enlivened by a series of precast concrete link bridges that have a fan-shaped arrangement in plan and spiral upwards in this tight space,” the citation observes. 15 Alice Lane Towers also won a Commendation in the Unique Design Aspects category. Other commendations were awarded to Group 5 for a Bridge Jacking project on the N17 Nasweto Highway in Soweto (Civil Engineering category); Aurecon for an Incrementally Launched bridge on the N1/R21 (also Innovative Technologies). A pioneering project that received a Commendation for Innovative Technologies was Southern Pipeline Contractors’ (SPC) Absorptive/Reflective Noise Barriers for Gautrain. This project, aimed at suppressing excessive noise, is a first in Southern Africa having introduced this essential technology against noise pollution to the region. SPC installed 15000m2 of barriers along sections of Gautrain’s route, specifically in residential and corporate areas reducing the impact of the noise source on the environment. The barrier’s have a life-cycle of 100 years and do not require any maintenance and can be produced in various shapes and colours to blend with their surroundings.
The Hospital Bend preselection traffic scheme, involving new overpass bridges for traffic flowing into Cape Town from Rhodes Drive and Settlers’ Way, scooped top honours in the Fulton Awards’ Construction Techniques category.
“This innovative technology has been introduced to South Africa and we commend the contractors for their foresight and creative thinking in solving this acoustical challenge.
The judges were impressed with the use of the suspended formwork system which utilised purpose-made structural steel lattice overhead girders with steel support structures, the design of which required extensive integration of the various design and construction elements.
Wood-fibre concrete has provided a viable and durable solution to reducing the noise along several sections of the Gautrain rapid rail route, and with the ability to shape and colour the material in various ways, it offers future innovative possibilities.”
“The Anzio Road Overpass was particularly challenging as the sharply curved bridge deck had to accommodate a vertical as well as a horizontal transitional curve, leading into a circular curve with a variable superelevation. “Impressive also, was the attention given to the concrete mixes, incorporating supplementary cementitious
The judges for the 2011 Fulton Awards were the president of the South African Institution of Civil Engineering, Seetella Makhethe; president of the South African Institute of Architects, Fanuel Motsepe; and CEO of CSSA, John Sheath.
August 2011
South Africa
into the building. “The new Ubuntu Centre is conceived as a node of intensity in a pedestrian network and acts as an on-the-way place of congregation, healing and opportunity. Designed to sustain the physical wellness and uplift the spirit of the community, it aims to propagate hope throughout the township,” the citation adds.
SPC management celebrating the Fulton Commendation received for Innovative Technologies, are Peter Lycklama (Plant Manager), Sam Malemela (Factory Manager), Paul Phipps (General Manager) and Steve Delport (Sales Manager).
SPC General Manager, Paul Phipps, receives the Fulton Commendation in Innovative Technologies for their Absorptive/Reflective Noise Barriers from Nic van den Berg, President of the Concrete Society of Southern Africa.
57
Structural Systems Africa
Block B, 60 Civin Drive, Pellmeadow Office Park, Bedfordview, 2007 PO Box 1750, Bedfordview, 2008 Tel: +27 11 409 6700 Fax:+27 (0) 86 616 7482 / +27 (0) 11 409 6789 Email: info@sslafrica.com Website: www.structuralsystemsafrica.com
Group Five is a diversified construction services, materials and infrastructure investment group The Nasweto N17 Highway project received “a commendation in the 2011 Fulton Awards ‘Civil engineering’ category“ and once again confirms that Group Five has the skills and experience to deliver any aspect of an infrastructural project.
Proud to be associated with the Blackburn Pedestrian Bridge
46 Lansdowne Road LANSDOWNE 7780 CAPE TOWN 8001 Tel: 021 696 0565 / 6 Fax: 021 696 1634 Email: ows@wbs.co.za
ORRIE, WELBY-SOLOMON & ASSOCIATES cc Civil & Structural Engineering Consultants
371 Rivonia Boulevard, Rivonia, PO Box 5016, Rivonia 2128, South Africa I Tel +27 11 806 0111 I Fax +27 11 803 5520 I Email info@groupfive.co.za I Website www.groupfive.co.za
South Africa
some things are meant to split...
not Sephaku Cement
[! ‹ M! ‹ ^^^ ZLWOHR\JLTLU[ JV aH
A proud sponsor of the 2011 Fulton awards
58
August 2011
The Blackburn Pedestrian Bridge. Winning awards for engineering that connects people. SANR AL’s Blackburn Pedestrian Bridge has recently received a Fulton Award for concrete-based Civil Engineering. This accolade is testimony to our absolute commitment to implementing the highest construction standards. More impor tantly, this project is an example of the work we do aimed at improving pedestrian safety around our highways, and connecting all South Africans. So congratulations to all the stakeholders involved, and thank you to every one of the people who help us go above and beyond to bring people together. SANRAL is an Agency of the Ministry of Transport.
P38835/E
www.sanral.co.za
REG NO. 1998/009584/06
Noise generated by highway traffic is becoming a contentious environmental problem worldwide. Urban and residential growth means heavier traffic loads. The major countries and cities of the world recognise that effective noise attenuation is of crucial importance and therefore Noise Barriers are a basic construction requirement. People who live or work next to a highway are not able to turn the volume down or just walk away from the noise. They need an effective system to deal with this continuous stressful irritation. Noise barriers can be custom designed and manufactured for the reduction of noise levels emitted by road, rail and air traffic. It can also effectively enhance the quality of people’s lives when applied at bus depots, factories, industrial plants, schools, old age homes and hospitals. Southern Pipeline Contractors, operating in South Africa since 1965, is proud to be the pioneers in introducing this modern acoustical technology against noise pollution in Southern Africa. Specially designed precast concrete panels meet the acoustic requirements. Aesthetically it further offers durability, robustness, low maintenance and long term cost effectiveness.
SPC General Manager, Paul Phipps, receives the Fulton Commendation in Innovative Technologies for their Absorptive/Reflective Noise Barriers from Nic van den Berg, President of the Concrete Society of Southern Africa.
SPC Acoustics offers expert design and manufacturing service to: Identify where route barriers are needed Barrier location relative to source and receiver Barrier dimensions In-house technical support Experience in and resources to manufacture specialised products A current track record of innovation and success After producing 15 000m2 of absorptive and reflective noise barriers along sections of the Gautrain Rapid Rail Project to a lifecycle standard of 100 years, the latest project by SPC Acoustics involves the design and erection of noise attenuation barriers at the Rea Vaya Bus Rapid Transit System (BRT) depot in Dobsonville, Soweto.
SPC management celebrating the Fulton Commendation received for Innovative Technologies, are Peter Lycklama (Plant Manager), Sam Malemela (Factory Manager), Paul Phipps (General Manager) and Steve Delport (Sales Manager).
Amazing, isn’t it... the difference 10dB can make? Noise barriers are exterior structures designed to protect sensitive areas from noise pollution in developed countries, and it is proved that effectively designed noise barriers reduce noise levels by 10-15dB. An exact definition of loudness is impossible as there is a great variance from person to person judging the loudness of sound. However, as numerous research tests have shown, people generally judge a sound level of 70dB as twice as loud as 60dB.
“We at SPC are proud to bring this innovative technology to the people of Africa. The reduction in especially road traffic noise intensity is known to significantly improve the quality of life by relaxing the environment, resulting in improved verbal communication, recreation and night rest” says Paul Phipps, SPC General Manager.
ACOUSTICS The Sound Choice
6 Main Reef Road, Dunswart, Boksburg, Gauteng PO Box 6546, Dunswart, 1508 Tel + 27 (0) 11 914 8500/1/2/3 Fax +27 (0) 11 914 4524 E-mail: spc@spc.co.za www.spc.co.za
SOUTHERN PIPELINE CONTRACTORS
Dimension Data Advanced Infrastructure The BEE compliant, South African-based brand was established in 1987 under the name Advanced Cabling, then later incorporated into the Dimension Data group forming its current corporate identity. Moreover, Dimension Data Advanced Infrastructure scooped the APC by Schneider Electric Partner of the Year Award for Africa for 2011. In 2010, Dimension Data achieved elite partner status when it received Global Certification from Cisco – one of only four organisations worldwide to achieve this prestigious ranking. For 24 years the organisation has been leading industry experts in the physical IT infrastructure fieldcatering to the construction sector, financial sector, blue chip companies, service providing sector, and government.Dimension Data Advanced infrastructure offers an array of services and works closely with its clients in meeting their objectives. The solutions range from: • Communication cabling • Data centre infrastructure development • Integrated security solutions • Energy management • Wireless connectivity communications • Risk ad-version All products and services are managed upon installation to ensure their durability and efficiency. Furthermore,technology and services offered are measured according to scalability, productivity, functionality, and redundancy. In essence Dimension Data Advanced Infrastructure does not only sell technology to its clients but also ensures that they always provide measurable and tangible benefits to businesses, that will in the long run enable them to maximise their synergy and ultimately productivity by enabling their ICT infrastructure.
19635
About Dimension Data Founded in 1983, Dimension Data plc is an ICT services and solutions provider that uses its technology expertise, global service delivery capability, and entrepreneurial spirit to accelerate the business ambitions of its clients. Dimension Data is a member of the NTT Group. www.dimensiondata.com
A few weeks ago, this was a data centre. Four data centres, to be precise. Taking up a lot of space and consuming excessive energy in a resource-hungry world. By consolidating technologies, Advanced Infrastructure turned our client’s four data centres into a single facility, reducing their carbon footprint, slashing operational costs and freeing up valuable office space for their expanding business. Advanced Infrastructure. Providing you with effective ICT Solutions. That’s Essential. For further information e-mail: ai.information@dimensiondata.com or phone: +27 11 575 0000
PROJECT TEAM Client uThukela District Municipality Design Engineers Jeffares & Green (Pty) Ltd ISD Consultants Khaya Management Solutions Main Contractor VF Munisi Civils (Pty) Ltd M&E Sub Contractors Klomac Engineering Franklin Engineering
Water, safe and potable, is taken for granted by many people with easy access to this essential ingredient. However, a life without ready access to water makes simple activities, like cooking and bathing, major challenges. In order to alleviate Dukuza residents from their daily chore of finding water, the uThukela District Municipality has completed the Dukuza / Hoffental Water Supply project.
Delivering Life’s Essential Resource To Dukuza The restive communities of Dukuza and Hoffental, just 13km west of the Bergville in KwaZulu-Natal, were identified as regions in dire need of reliable potable water supply. The communities comprise approximately 1,516 households and a total of about 12,500 residents. The project, through underground pipes, will link the communities to the existing Moyeni-Zwelisha water treatment works 8km from Dukuza and Hoffental. This is not the first attempt to provide a reliable water source to the communities, which traditionally had to travel great distances to collect water from the local Tugela River and carry it back for personal use. During the 1990s the Dukuza Water Supply Scheme, comprising 37km of pipelines, 75kl reservoir and break pressure tanks, was developed. However, this reticulation project had fallen into disrepair following the failure of the bulk water supply into the system. Further exacerbating the state of these pipelines were their poor construction, pipes exposure to the elements as well as informal house connections by residents. The new Dukuza-Hoffental contract includes the construction of 75km of ductile iron and steel PVC and HDPE pipelines of various
sizes; valve and meter chambers; break-pressure tanks; reinforced concrete storage reservoirs; a pump station; a 100kiloliter elevated steel tank on a 15m high steel stand and the installation of 180 communal standpipes throughout the area. Incorporating a bit of the old with the new, the contract was also extended to replace the existing Dukuza Water Supply Scheme’s reticulation with new pipelines, valves and standpipes. Engineered and designed by Jeffares & Green, the Dukuza-Hoffental project assists in the municipality’s overall aims and objectives of the Moyeni / Zwelisha Regional Scheme, which includes optimising benefits to the community by developing the sustainable water resource available in the area, the Tugela River. These projects also minimise costs and increase sustainability through use of existing water supply infrastructure. Regarding socioeconomic impact, the project also facilitates institutional development and training efforts across the proposed projects in the area, builds capacity through encouraging project participation by community members and uplifts the community through job creation.
P. O. Box 498 Mooi River 3300 Tel: 036 352 8283 Fax: 086 606 8299
ADVERTISERS’ INDEX ADCC Sadolin ..............................................IBC
Goldstar ..........................................................29
Power Technics ..............................................38
Africa Mining Brief ..........................................27
Greenacres Landscape ..................................46
PPC Cement ..................................................49
Airmac ............................................................40
Group 5...........................................................58
Salebhai Glass ...............................................17
Alaf Ltd ...........................................................41
Hlanganani Engineers ....................................50
Sanral .............................................................59
Aurora Africa...................................................39
Interface Consulting Uganda ..........................40
Scaw Metals .....................................................5
Barlow World ....................................................4
Ipad.................................................................27
Bergmix Concrete ...........................................63
Jandu Construction.........................................43
Bramley & Associates.....................................56
Jeffares & Green ............................................48
China Truck ....................................................45
Jesani Construction ........................................38
Citron Décor ...................................................26
Jessop & Associates (Pty) Ltd ........................47
Construction Review Tenders ........................47
Macks Cartage ...............................................51
Continental Cranes .........................................27
Mantrac Uganda .............................................40
Davis & Shirtliff ...............................................26
Mark Properties ..........................................1,2,3
Decra Roofing Systems ..................................44
Marryart East Africa ........................................39
Dimension Data ..............................................62
Master Power ...........................................33, 39
Tech Hard Building Materials LLC ..................15
Dorma .............................................................19
Multi Konsult ...................................................28
Terrain ............................................................32
DSM Glassworks ............................................42
Nabaki Afrika ............................................43, 44
Thermocool ....................................................38
Energy Utilisation............................................40
Orrie, Welby-Solomon & Associates Cc .........58
TPCC ............................................................IFC
Sephaku Cement ............................................58 Seyani Brothers ..............................................38 Sika.................................................................21 Solarhart/Wilken .............................................26 Sotiralis Consulting Engineers........................58 Southern Pipeline .....................................60, 61 Steffanuti Stocks...................................... 52,-55 Stema Associates ...........................................39 Structural Systems .........................................58 Tanga Cement ............................................OBC
What the Hell is he staring at I Dont SEE anything!..
Where is all that wildlife?!!
Stay where you can be seen! To book a space contact your nearest agency for more information. (See contact details on page 8)
a 22nd Anniversary Edition J No June 20 June 2011 V Voll 22 N No. 5
African
Mining Brief October - December 2009, Volume 3 No. 2
www.constructionreviewonline.com
The John James Audubon Bridge
Plus
OUR PUBLICATIONS
Redefining the Aesthetics of a House with Roof Tiles Mvuvi House,Tanzania “Made in Nigeria” Steel pipes Nigeria River's Edge, South Africa
Going for Gold Inside
www.constructionreviewonline.com www.ambriefonline.com www.agriculturalreviewonline.com
Barrick Gold Training and Technology Cornerstone of Mine Safety
CONSTRUCTION REVIEW
AFRICAN MINING BRIEF
AGRICULTURAL REVIEW