Catalogo Pastore & Lombardi 2014 (ENG) by Cosmobile Srl

2014

Reg. No. 1175-A UNI EN ISO 9001:2008

Nr 50 100 12346 UNI EN ISO 9001: 2008

Reg. No. 1175-I BS OHSAS 18001:2007

PASTORE & LOMBARDI S.p.A. con socio unico soggetta a direzione e coordinamento da parte di Hilbe S.p.A. Via Don Minzoni 3, 40057 Cadriano di Granarolo Emilia (Bologna) - Italy Tel. +39 051 764111 - Fax +39 051 765414 Capitale Sociale â&#x201A;Ź 468.000 i.v. - R.I. Bologna, C.F. e P.IVA 03276650375 R.E.A. della C.C.I.A.A. di Bologna 277528 www.pastorelombardi.com - info@pastorelombardi.com

Catalogo 2014 eng.indb 1

02/07/2014 10:01:15

GENERAL INDICATIONS AND RECOMMENDED USE The indications given in this document refer to products supplied by Pastore & Lombardi. They help our Customers, either Manufacturers or Dealers, selecting the product which suits their needs best. Standard principles should be applied for all those products which are not included in the following notes: 1.

Select a product and product quantity according to the specifications and application of the finished product or industrial product.

Contact Pastore & Lombardi for any technical information which may help in the selection of the product

Pastore & Lombardi products are usually installed onto industrial products, either means of transportation or different systems, which have been designed and owned by Pastore & Lombardi customers or final customers. Pastore & Lombardi has no knowledge on these projects, their needs and specifications. Pastore & Lombardi shall not select any part and disclaim all responsibility. The installer shall be fully responsible for the selection of the parts which best suit to customer’s needs. Pastore & Lombardi is not responsible for any troubles caused by incorrect or improper installation of their products onto the final product. For an easier product selection, test reports by certified institutions are available at Pastore & Lombardi’s. Tests details are not included in the catalogue but are available on request. The customer shall inform Pastore & Lombardi formally on special projects, applications or use when ordering the product so that proper co-operation along with indications are given. Given information by the customer shall not be binding to Pastore & Lombardi who reserve to accept. On customer’s request and subject to prior approval by Pastore & Lombardi, tests can be carried out to check suitability to the specified application. Even though tests are carried out, Pastore & Lombardi is not responsible for actual suitability of the product to the specified use. Even though tests are carried out, this does not mean that projects, applications or special uses have been authorized. Pastore & Lombardi will accept complaints on their products only if referred to defects due to Pastore & Lombardi already existing when the product has been delivered to the customer.

Catalogo 2014 eng.indb 2

02/07/2014 10:01:16

steels and treatments Stainless steel products Austenitic steel AISI 304 is the kind of stainless steel used for all our products. This grade of steel features excellent resistance to corrosion and its mechanical characteristics are ideal for cold-forming, the typical process used to manufacture most of our products. Austenitic steel is classified as stainless steel thanks to its ability to develop a protective film on the surface when it comes in contact with the oxygen released in air, thus barring the way to corrosion and rust. It is nonmagnetic, and will retain its antioxidizing performance even when partially magnetized in the course of work hardening. To reproduce the conditions leading to optimum corrosion resistance, our products undergo a number of surface finish processes, such as electropolishing, brushing, shot-peening, that improve weatherability as well as the appearance of the product. These are preceded by the usual pickling and passivation processes to recreate the protective film. The user is advised to follow some precautions regarding their installation and use so that the characteristics of the stainless steel products are maintained. Welding Austenitic steel is easily welded. Recommended filler metal for welding, arc welding, welding rod or MIG welding is AISI308L. TIG welding, where the base metal is melted to join the weld edges, requires no special precautions. Note that all welding processes involve high temperatures, which lead to loss of corrosion resistance. For this reason, the heated areas should be quenched in water and then pickled to recreate the surface film. Contact the Manufacturer of the welding machine for further information. Fastening We recommend to use stainless steel fasteners only (screws, bolts, rivets, etc.). The combination with iron or other non noble metals leads to electrolytic corrosion that may damage both the stainless steel part and the fasteners. The Customer shall select the fastener type according to the project and needed capacity and strength, which are data unknown to Pastore & Lombardi. Assembly During the assembly procedures, iron particles may stick to the surface of stainless steel parts and trigger electrochemical reactions that eventually lead to corrosion. We recommend not to use any tools that have been used to work plain metals. In the event that our stainless steel products are somehow contaminated by iron particles, remove such contaminants and pickle the concerned areas. Steel components with electrolytic and passivation coating The two final products with electrolytic zinc plating for surface treating will be available in two different passivation types: 1ª - Fe/Zn 7 II (Electrolytic Zinc Coating, thickness 7µm + clear passivation Cr3), indicated in catalogue with text “Z.PL.” This kind of surface treatment gives the products a nice external feature and a protection for the stocking and movement of the material. 2ª - Fe/Zn 7 IV (Electrolytic Zinc Coating, thickness 7µm + iridescent passivation Cr3) , indicated in catalogue with text “IRIDZINC-PLATED”. This kind of surface treatment, compared with the previous one, a higher resistance against the agents of the atmosphere. A painting is recommended to provide an optimal protection for the usage of the components. In case of welding of our zinc plated components, the supplier of the welding machine should be informed accordingly regarding the material provided.

Catalogo 2014 eng.indb 3

02/07/2014 10:01:16

ORDINARY MAINTENANCE OF STAINLESS STEEL The factor determining the frequency and therefore the attention to be given to normal maintenance is the kind of climate/ environment which the generic component will withstand. The table hereunder (an extract from norm UNI EN ISO 12944-2) classifies the environment conditions according to their starkness. From C1 which identifies a NON problematic environment to C5 where the environment is particularly aggressive. CATEGORY

CORROSIVITY

ENVIRONMENT CHARACTERISTICS

VERY LOW

Dry and hot zones with a very low pollution rate

LOW

Temperate zones, low pollution (rural areas, small towns) [SO2<12µg/mq]

AVERAGE

Temperate zones, average pollution (urban, industrial areas, coast zones with low salinity) [SO2 12-40µg/mq]

HIGH

Temperate and polluted zones (industrial areas and coast zones with moderate salinity) [SO2 >40µg/mq]

C5-I

VERY HIGH

Temperate zones, high pollution (industrial areas with high humidity and aggressive atmosphere) [SO2>80µg/mq]

C5-M

VERY HIGH

Temperate zones, high pollution (coast zones and offshore areas with high salinity )

In cold zones or during winter periods the presence of salt used to melt the ice on the roads can represent a problem. In this case the environment becomes more aggressive and a more frequent cleaning of the component is recommended. In a climatic condition with starkness rate corresponding to C1-C2 a routine cleaning every 3-6 months is sufficient. As conditions become more critical, maintenance interventions must be more frequent. Ordinary maintenance consists in simple washing with fresh water using a clean cloth or a nylon sponge (Scotch Brite); normal detergents or neutral degreasers (car shampoo) can also be used. It is very important to rinse carefully after cleaning / use of the detergents, particularly in those critical areas such as narrow gaps or dead holes which – for their nature – keep more easily the substances with which they get in contact, thus creating a stagnating and aggressive environment for the material. In the table hereunder some suggestions are given on the use of suitable or NON suitable products for the cleaning and maintenance of stainless steel products. Cleaning product

USE

SUGGESTIONS

FRESH WATER

YES

If calcareous, spots can appear on the surface. To be rinsed carefully

DEIONIZED WATER

YES

It avoids the appearance of calcareous spots.

DETERGENTS/NEUTRAL DEGREASERS

YES

It is very important to rinse carefully

ABRASIVE POWDER DETERGENTS

CAUTION They can spoil the aesthetic appearance of the surface finishing

MURIATIC ACID

HYDROCHLORIC ACID BASED SOLUTIONS

CHLORINE WATER

HALIDES

PRODUCTS FOR SILVER CLEANING

CLEAN CLOTH

YES

NYLON SPONGE

YES

STAINLESS STEEL WOOL

CAUTION It does not contaminate the surface but can spoil the aesthetic aspect

NON-STAINLESS STEEL WOOL

Catalogo 2014 eng.indb 4

If these products incidentally get in contact with the material it is important to allow very short contact times, to rinse abundantly and pay thorough attention that narrow gaps and dead holes /stagnating areas are clean

It must be made sure that there are no previous dust particles which may scratch the surface

May lead to iron contamination

02/07/2014 10:01:16

EXTRAORDINARY MAINTENANCE OF STAINLESS STEEL Despite the attention to be paid on routine maintenance, there is always the possibility of unforeseen events which can spoil – particularly if the intervention is not carried out in the right time– the integrity of the component, affecting not only the surface. In these cases, especially if the level of damage is in an advanced phase, it is always advisable to contact an expert for surface treatments on stainless steels, who will give the correct suggestions on the products to be used and the application procedures. As a completion, the table hereunder is indicating some of the most usual inconveniences which may occur to the component and the remedies to solve or improve the problem. PROBLEM

DESCRIPTIONS

SOLUTION

FERROUS CONTAMINATION

Iron particles which may remain trapped on the surface of the stainless steel product in a direct way, such as using brushes or sponges with non-stainless steel wires, or in an indirect way such as grinding carried out on a simple steel located close to the stainless steel product. The iron particle in contact with the stainless one will oxidize very quickly (rust) causing spotting on the surface, which – in some cases – can lead to localized corrosion

If still in a starting phase, an intervention can be made through simple washings possibly using also nylon sponges. On the contrary, if the event is more evident, especially in cases where the surface already shows marks of localized corrosive activity (pitting), it is necessary to contact an expert of surface treatments for stainless steel

GENERIC CONTAMINATION

Non-iron particles or tenacious dirt, glue remnants or other exogenous materials

In case of contamination with other metals such as aluminum, copper, etc., the procedures for the treatment are the same as for ferrous. In case of glue remnants or tenacious dirt, degreasers or solvents such as acetone can be used. It is essential to rinse abundantly after their use. On the contrary, if the contamination has developed into localized corrosion of the material, an expert must be contacted as described in the above point

SURFACE SCRATCHES

OILS AND GREASE REMNANTS

PAINTS OR GRAFFITI

CEMENT, MORTAR,PLASTER

Accidental scratches on the surface of stainless If it is certain that a ferrous contamination has not steel taken place (tool previously working on simple steels) a detergent/polish suitable for stainless steel can be applied using a soft cloth Accidental spatters or imprints

These can be removed using alcohol based products, or in some cases acetone. The application must be carried out with a soft cloth, so as not to scratch the surface. After that, it is necessary to rinse with water

Accidental spatters or vandalistic acts

To remove these surface signs, specific products must be used, generally alkaline or solvent paint removing products, then carefully rinse possibly with hot water (60°C).Mechanical removal (i.e. through a scraper or knives) must be avoided, because it would scratch the surface

Accidental splatters or imprints

These can be removed with water in solution with small percentages of phosphoric acid . After that a careful rinse with water and mop

A more aggressive climate condition will increase the possibility to have serious consequences on the integrity of the product (please refer to the table in the previous paragraph for the classification of environment starkness).

Catalogo 2014 eng.indb 5

02/07/2014 10:01:16

Indexes

Indexes 020312816...............................................197 020315730...............................................197 020414554...............................................204 020500714...............................................204 020500868A............................................207 020500873A............................................207 020512926...............................................197 020512981...............................................197 020513903...............................................204 020801429...............................................110 020801435...............................................110 020815680...............................................110 020815681...............................................110 020815872...............................................109 020815873...............................................109 020815913...............................................109 020821095...............................................108 020823495B.............................................108 020823496B.............................................108 020823497B.............................................108 020823498B.............................................108 020823499B.............................................108 020825684...............................................108 020825685...............................................108 020825686...............................................108 020826729...............................................108 020900605A............................................205 020900606A............................................205 020900607A............................................205 020900608A............................................205 020900611...............................................206 020902342...............................................206 020925654...............................................199 020926420...............................................206 024117267C............................................157 024120253E.............................................157 024121322C............................................157 024123667A............................................157 026400567...............................................194 026712012...............................................159 030325085...............................................198 030325653...............................................199 030325657...............................................199 030400580...............................................194 030400590...............................................194 030420377...............................................194 030422806...............................................195 030500016...............................................200 030515672A............................................201 030515673A............................................201 030515674A............................................201 030515676...............................................202 030515852A............................................201 030515853...............................................201 030518540A............................................208 030520744...............................................196 030520752...............................................155 030520925B.............................................200 030520926B.............................................200

Catalogo 2014 eng.indb 6

030520927B.............................................200 030525396A............................................198 030525397A............................................198 030525399...............................................198 030525426...............................................197 030526207...............................................196 030526208...............................................196 030526749...............................................196 030612931B.............................................204 030802755...............................................208 030817767...............................................111 030825635...............................................111 030825637...............................................112 030825638...............................................111 030825641...............................................112 030825642...............................................112 030825643...............................................111 030825646...............................................112 033721187...............................................168 033721190...............................................168 033721191...............................................168 033721192...............................................168 033721193...............................................169 033721194...............................................169 033721195...............................................169 033721481...............................................169 034711231A............................................170 034711232A............................................170 034722281...............................................170 034722710B.............................................170 035023318...............................................170 035125998...............................................165 035225309...............................................167 035225310...............................................167 035225760...............................................167 035225761...............................................167 035302484B.............................................173 035314494B.............................................173 035315473B.............................................173 035315991B.............................................171 035316080...............................................171 035317541...............................................166 035318534...............................................166 035318985A............................................171 035319522B.............................................173 035320686B.............................................171 035321301B.............................................172 035321513A............................................172 035323020A............................................172 035325270...............................................172 035402335A............................................222 035402336...............................................222 035402554...............................................223 035402556...............................................223 035402561...............................................220 035410999A............................................166 035412182...............................................221 035412522...............................................219 035412800A............................................226

035412857A............................................223 035413588...............................................221 035414326...............................................221 035415657...............................................223 035419397...............................................223 035420603A............................................222 035420604...............................................222 035421883A............................................222 035421963A............................................219 035421964A............................................219 035421965A............................................220 035421966A............................................220 035422247A............................................203 035422248A............................................203 035422278A............................................203 035422279A............................................203 035424858...............................................193 035425604...............................................193 035425605...............................................193 035425606...............................................193 035425607...............................................193 035425608...............................................193 035425609...............................................193 035425610...............................................193 035425611...............................................193 035425612...............................................193 035515800A............................................146 035516148...............................................146 035517576...............................................144 035519332...............................................138 035519332...............................................142 035519332...............................................144 035520031A............................................144 035521086A............................................132 035521236A............................................144 035521436A............................................132 035521469...............................................145 035522316A............................................132 035522899...............................................132 035523377...............................................132 035525393...............................................145 035526389...............................................145 035623535...............................................165 035625978...............................................165 035625979...............................................165 035821634A............................................224 035821635A............................................224 035821636A............................................224 035821637A............................................224 035821638A............................................224 035821639A............................................224 035821644A............................................224 035821645A............................................224 035821646A............................................224 035821647A............................................224 035821648A............................................224 035821649A............................................224 035821650A............................................224 035821651A............................................224

02/07/2014 10:01:16

035821652A............................................225 035821653A............................................225 035821654A............................................225 035821655A............................................225 035821656A............................................224 035821657A............................................224 035821658A............................................224 035821659A............................................224 035821668A............................................225 035821669A............................................225 035821670A............................................225 037317551...............................................159 037317552...............................................159 038615900A............................................162 038617455A............................................162 038620088...............................................163 038624184...............................................163 038625438...............................................163 038626957...............................................163 038626958...............................................163 038627012A............................................162 038627013A............................................162 038627014A............................................162 038627015A............................................162 038627148...............................................162 038627149...............................................162 070115766................................................. 93 070116074A.............................................. 92 070116351A.............................................. 92 070116966A.............................................. 90 070120776A.............................................. 86 070120783................................................. 88 070122152C.............................................. 96 070122153A.............................................. 96 070122685C.............................................. 92 070122766D.............................................. 91 070123707A.............................................. 89 070123716................................................. 89 070200400................................................. 93 070215127B............................................... 92 070215462B............................................... 92 070220777A.............................................. 86 070221827................................................. 90 070322203A.............................................. 93 070322204B............................................... 90 070322207B............................................... 86 070322208A.............................................. 91 070322210B............................................... 86 070322215A.............................................. 90 070322631A.............................................. 88 070322977A.............................................. 93 070324866................................................. 89 070326237................................................. 89 070326242................................................. 87 070326243................................................. 88 070326251................................................. 88 070326343................................................. 87 070422217A.............................................. 93 070422690A.............................................. 93

Catalogo 2014 eng.indb 7

070514508A.............................................. 94 070514509A.............................................. 94 070515848................................................. 94 070516283A.............................................. 94 070521111A.............................................. 94 070524525................................................. 91 070810489B.............................................100 070820809A............................................101 070821919A............................................102 070821921A............................................102 070822013A............................................100 070822015A.............................................. 99 070822017A.............................................. 99 070822043A............................................102 070822154B.............................................104 070822309B.............................................104 070822750B.............................................101 070822750B.............................................155 070822752B.............................................101 070823235...............................................101 070823280A............................................104 070824999A............................................105 070825000A............................................105 070825004A.............................................. 99 070825055A............................................100 070900277A............................................103 070910490B.............................................100 070912686A............................................103 070920810A............................................101 070921920A............................................102 070921922A............................................102 070922014A............................................100 070922016A.............................................. 99 070922751B.............................................101 070922751B.............................................155 070922753B.............................................101 070923526A.............................................. 99 071019198C............................................153 071019290...............................................156 071020152C............................................153 071020355A............................................154 071020935A............................................156 071021893...............................................156 071021923B.............................................153 071222163A.............................................. 40 071222167A.............................................. 52 071225570A.............................................. 67 071226125................................................. 67 071226304................................................. 46 071226305................................................. 68 071226309................................................. 60 071226319................................................. 52 071322164A.............................................. 40 071322189E............................................... 67 071323606A.............................................. 37 071324718C.............................................. 78 071326310................................................. 46 071326310................................................. 60 071326341................................................. 46

071326342................................................. 60 071326414................................................. 52 071326415................................................. 67 071327344................................................. 77 071425859................................................. 26 071425950C.............................................. 18 071425951C.............................................. 18 071425952C.............................................. 19 071425953C.............................................. 19 071625856................................................. 81 071625858................................................. 81 071626109................................................. 83 071626356................................................. 83 071626904................................................. 81 071800612A............................................203 071810820Z.............................................203 071815850...............................................207 071900664...............................................195 071911183................................................. 53 071911183................................................. 69 071911258A.............................................. 66 071911259A.............................................. 66 071911463................................................. 65 071911463...............................................129 071912447................................................. 53 071912447................................................. 69 071912448................................................. 53 071912448................................................. 69 071912449................................................. 53 071912449................................................. 69 071912453................................................. 54 071912453................................................. 70 071912972................................................. 39 071913139................................................. 41 071913141................................................. 41 071913142................................................. 41 071913145................................................. 41 071913146................................................. 41 071913148................................................. 39 071913154................................................. 39 071913155................................................. 39 071913158................................................. 39 071913159................................................. 39 071913831................................................. 51 071913832................................................. 51 071913942................................................. 54 071913942................................................. 70 071913949................................................. 39 071913993................................................. 51 071914156A............................................202 071915128................................................. 45 071915128................................................. 59 071915129................................................. 45 071915129................................................. 59 071915260................................................. 95 071915479................................................. 82 071915480................................................. 24 071915480................................................. 32 071915480................................................. 42

Indexes

02/07/2014 10:01:16

Indexes

Indexes 071915480................................................. 55 071915480................................................. 73 071916324................................................. 65 071916344................................................. 51 071916973A.............................................. 95 071917418A.............................................. 69 071917419A.............................................. 69 071917420A.............................................. 53 071917421A.............................................. 53 071917544A.............................................. 62 071919201...............................................203 071919206A............................................129 071919340................................................. 47 071919340................................................. 61 071919341................................................. 47 071919341................................................. 61 071919407A.............................................. 62 071920120...............................................129 071920299A.............................................. 47 071920299A.............................................. 61 071920300A.............................................. 47 071920300A.............................................. 61 071920301................................................. 54 071920301................................................. 70 071920397...............................................195 071920436A............................................195 071920437A............................................195 071920618A.............................................. 22 071920618A.............................................. 27 071920619A.............................................. 22 071920619A.............................................. 27 071920622................................................. 22 071920622................................................. 27 071921019A.............................................. 49 071921020................................................. 49 071921021................................................. 49 071921023................................................. 48 071921024A.............................................. 48 071921058................................................. 65 071921058...............................................129 071921088................................................. 63 071921089................................................. 63 071921103................................................. 66 071921569A.............................................. 47 071921569A.............................................. 61 071921602................................................. 53 071921602................................................. 69 071921603................................................. 53 071921603................................................. 69 071921805...............................................154 071921929................................................. 33 071921929................................................. 73 071921933................................................. 54 071921933................................................. 70 071921934................................................. 82 071921935...............................................202 071921968................................................. 63 071921969................................................. 63 071922018A.............................................. 45

Catalogo 2014 eng.indb 8

071922018A.............................................. 59 071922019................................................. 45 071922019................................................. 59 071922131................................................. 21 071922131................................................. 38 071922133................................................. 30 071922382................................................. 63 071922383................................................. 63 071922443................................................. 48 071922444................................................. 65 071922483................................................. 28 071922484A.............................................. 23 071922484A.............................................. 28 071922651................................................. 31 071922679................................................. 62 071922684................................................. 22 071922684................................................. 27 071922701A.............................................. 82 071922754A.............................................. 26 071922756................................................. 22 071922756................................................. 27 071922757................................................. 22 071922757................................................. 27 071922760................................................. 22 071922760................................................. 27 071922761................................................. 22 071922761................................................. 27 071922890................................................. 32 071922890................................................. 74 071922890A.............................................. 24 071922890A.............................................. 42 071922890A.............................................. 55 071922890A.............................................. 71 071922907................................................. 33 071922907................................................. 74 071922908A.............................................. 21 071923115................................................. 21 071923187................................................. 96 071923438................................................. 20 071923442................................................. 29 071923503................................................. 20 071923588................................................. 49 071923636................................................. 65 071923641................................................. 38 071923642................................................. 38 071923643................................................. 38 071923644................................................. 38 071923656................................................. 51 071923950................................................. 23 071924130................................................. 50 071924131................................................. 64 071924146................................................. 22 071924146................................................. 27 071924147................................................. 22 071924147................................................. 27 071924339................................................. 50 071924339................................................. 64 071924341................................................. 50 071924341................................................. 64

071924349A.............................................. 50 071924349A.............................................. 64 071924351A.............................................. 50 071924351A.............................................. 64 071924359................................................. 77 071924359................................................. 78 071924493................................................. 33 071924546................................................. 95 071924547................................................. 95 071924614................................................. 33 071924669................................................. 51 071924985................................................. 51 071924985................................................. 66 071925016................................................. 33 071925189F............................................... 31 071925189F............................................... 58 071925190C.............................................. 72 071925201................................................. 20 071925478...............................................194 071925851................................................. 24 071925851................................................. 42 071925873................................................. 29 071925948D.............................................. 30 071925948D.............................................. 45 071925949B............................................... 37 071926011................................................. 33 071926011................................................. 73 071926015................................................. 29 071926024................................................. 50 071926024................................................. 64 071926029A.............................................. 50 071926029A.............................................. 64 071926152A.............................................. 56 071926153................................................. 83 071926175...............................................158 071926209...............................................158 071926274A.............................................. 25 071926274A.............................................. 43 071926298A.............................................. 31 071926299A.............................................. 30 071926412................................................. 48 071926413................................................. 48 071926520................................................. 58 071926677................................................. 71 071926780................................................. 32 071926780................................................. 74 071926781................................................. 25 071926781................................................. 43 071926883................................................. 58 071926918A.............................................. 55 071926918A.............................................. 71 071926939................................................. 56 071926939................................................. 72 071927025................................................. 32 071927025................................................. 73 071927026................................................. 32 071927026................................................. 73 071927027................................................. 32 071927027................................................. 73

02/07/2014 10:01:16

071927028................................................. 32 071927028................................................. 73 071927029................................................. 32 071927029................................................. 73 071927030................................................. 32 071927030................................................. 73 071927031................................................. 32 071927031................................................. 73 071927032................................................. 32 071927032................................................. 73 071927033................................................. 32 071927033................................................. 73 071927034................................................. 32 071927034................................................. 73 071927035................................................. 29 071927036................................................. 29 071927037................................................. 29 071927038................................................. 29 071927039................................................. 29 071927040................................................. 29 071927041................................................. 29 071927042................................................. 29 071927043................................................. 29 071927044................................................. 29 071927045................................................. 24 071927045................................................. 42 071927045................................................. 55 071927045................................................. 71 071927046................................................. 24 071927046................................................. 42 071927046................................................. 55 071927046................................................. 71 071927047................................................. 24 071927047................................................. 42 071927047................................................. 55 071927047................................................. 71 071927048................................................. 24 071927048................................................. 42 071927048................................................. 55 071927048................................................. 71 071927049................................................. 24 071927049................................................. 42 071927049................................................. 55 071927049................................................. 71 071927050................................................. 24 071927050................................................. 42 071927050................................................. 55 071927050................................................. 71 071927051................................................. 24 071927051................................................. 42 071927051................................................. 55 071927051................................................. 71 071927052................................................. 24 071927052................................................. 42 071927052................................................. 55 071927052................................................. 71 071927053................................................. 24 071927053................................................. 42 071927053................................................. 55

Catalogo 2014 eng.indb 9

071927053................................................. 71 071927054................................................. 24 071927054................................................. 42 071927054................................................. 55 071927054................................................. 71 071927139................................................. 77 072009462B.............................................183 072010310B.............................................183 072014003A............................................183 072016554B.............................................183 072016555C............................................183 072016746B.............................................183 072020669...............................................184 072020670...............................................183 072021424D............................................178 072021425C............................................179 072021426C............................................179 072021451...............................................179 072021544B.............................................155 072021545B.............................................155 072022021B.............................................177 072022343...............................................179 072022617B.............................................184 072022618B.............................................184 072023872...............................................184 072025591...............................................178 072027219...............................................177 072027220...............................................177 072027358 ..............................................177 072301080...............................................121 072301288...............................................120 072301289...............................................120 072301290...............................................120 072301291...............................................120 072301292...............................................120 072301295A............................................120 072301296...............................................120 072301331A............................................121 072301332...............................................121 072301333...............................................121 072301449...............................................119 072310944...............................................118 072310945...............................................118 072310946...............................................118 072310947...............................................118 072312524...............................................118 072312525...............................................118 072312898...............................................121 072319804...............................................119 072320381...............................................117 072320382...............................................117 072320865...............................................117 072322748...............................................118 072322749...............................................118 072323683...............................................117 072324765...............................................117 072325051...............................................115 072325816...............................................116 072325817...............................................116

072325818...............................................116 072325821...............................................116 072326695...............................................119 072327266...............................................115 072421585D............................................137 072421585D............................................141 072421585D............................................178 072423281...............................................136 072423282B.............................................136 072424176G............................................137 072424559A............................................137 072424559A............................................143 072424591G............................................135 072424601C............................................137 072424601C............................................141 072424602C............................................137 072425624C............................................143 072425674B.............................................138 072425674B.............................................142 072425674B.............................................143 072425893D............................................135 072426551A............................................138 072426551A............................................142 072426552B.............................................138 072426552B.............................................142 072426569B.............................................139 072426570B.............................................139 072426571...............................................141 072426572...............................................141 072426611...............................................135 072426618A............................................148 072426661...............................................143 072426727...............................................136 072426802...............................................136 072426802...............................................140 072515899...............................................125 072515899...............................................140 072515899...............................................143 072515902...............................................125 072518972...............................................126 072519001B.............................................125 072519456...............................................125 072519456...............................................140 072519456...............................................143 072520416B.............................................125 072520702C............................................124 072520741B.............................................124 072621706...............................................127 072621709...............................................126 072621710...............................................126 072621711...............................................127 072621733...............................................127 072622158B.............................................128 072622298...............................................126 072622299...............................................128 072622420...............................................128 072626131...............................................128 072821682...............................................186 075022423................................................. 62

Indexes

02/07/2014 10:01:16

Indexes

Indexes 075025299B............................................... 78 080522910................................................. 21 081217079A............................................180 081309142A............................................191 081315898...............................................185 081317202...............................................109 081319219...............................................185 081400453A............................................109 081409292A............................................180 081409327A............................................180 081409387A............................................180 081409405...............................................182 081409470A............................................181 081409471A............................................181 081409503C............................................182 081409504B.............................................182 081409533B.............................................181 081409550A............................................182 081414337C............................................180 081607547B.............................................175 081613369...............................................175 081614121C............................................175 081621989C............................................176 081621990C............................................176 081621992C............................................176 082500379D............................................211 082510291D............................................213 082510300D............................................214 082510301D............................................214 082513963...............................................216 082514962...............................................215 082520126...............................................216 082520127...............................................216 082520144D............................................214 082520461D............................................211 082520464D............................................211 082520469D............................................211 082520472D............................................212 082520473D............................................212 082520475D............................................212 082520477D............................................212 082520479D............................................213 082520480D............................................213 082520481D............................................213 082520482D............................................213 082520483D............................................213 082520484D............................................214 082520486D............................................214 082520487D............................................214 082520489D............................................214 082520987D............................................211 082520989D............................................211 082520994D............................................212 082521381D............................................213 082521457D............................................214 082523999B.............................................136 082523999B.............................................140 082523999B.............................................214 082524183...............................................215

Catalogo 2014 eng.indb 10

082524323A............................................136 082524323A............................................140 082524323A............................................214 082525167...............................................215 082525706...............................................217 082526278A............................................136 082526278A............................................140 082526278A............................................214 082802490...............................................187 082802491A............................................187 082807885...............................................188 082807888A............................................187 082807954...............................................187 082807975...............................................188 082808003...............................................188 082813790A............................................186 082815877...............................................186 082819534C............................................189 082819535C............................................188 082819536C............................................189 082819537C............................................189 082820215A............................................189 082821105A............................................190 082821607A............................................158 082824321...............................................191 082824322...............................................191 082826241...............................................190 082826765...............................................190 082826766...............................................190 083400475...............................................151 083400476...............................................152 083400478...............................................152 083402509A............................................151 083423367...............................................152 083425942A............................................156 083426154...............................................150 083426155...............................................150 083426156A............................................150 083426157A............................................150 083426662A............................................151 083426663A............................................151 083615917A............................................220 084515960...............................................191 085025188A............................................136 085025188A............................................140 085025188A............................................214

02/07/2014 10:01:16

RECESSED DOOR LOCKS FOR Ø16 MM BAR....................................... 18 RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS...... 20 RECESSED DOOR LOCKS FOR Ø 16 MM BAR - SPARE PARTS........ 24 RECESSED DOOR LOCKS FOR Ø 15 MM BAR...................................... 26 RECESSED DOOR LOCKS FOR Ø 15 - COMPONENTS....................... 27 RECESSED DOOR LOCKS FOR Ø 15 MM BAR - SPARE PARTS........ 29 RECESSED DOOR LOCKS FOR Ø 22 MM BAR ..................................... 30 RECESSED DOOR LOCKS FOR Ø 27 MM BAR ..................................... 31 RECESSED DOOR LOCKS PREVIOUS VERSIONS - SPARE PARTS... 32 EXTERNAL LOCKS Ø 16 MM..................................................................... 36 EXTERNAL LOCKS Ø 16 MM - COMPONENTS.................................... 38 EXTERNAL LOCKS Ø 16 MM - SETS........................................................ 40 EXTERNAL LOCKS Ø 16 MM - SPARE PARTS........................................ 41 EXTERNAL LOCKS Ø 22 MM..................................................................... 44 EXTERNAL LOCKS Ø 22 MM - COMPONENTS.................................... 48 EXTERNAL LOCKS Ø 22 MM - SETS........................................................ 52 EXTERNAL LOCKS Ø 22 MM - SPARE PARTS........................................ 53 EXTERNAL LOCKS Ø 27 MM..................................................................... 57 EXTERNAL LOCKS Ø 27 MM - COMPONENTS.................................... 62 EXTERNAL LOCKS Ø 27 MM - SETS........................................................ 67 EXTERNAL LOCKS Ø 27 MM - SPARE PARTS........................................ 69 EXTERNAL LOCKS PREVIOUS VERSIONS - SPARE PARTS................ 73 REAR DOOR LOCK SL2............................................................................... 77 REAR DOOR LOCK SLIM............................................................................. 78 CATCH LOCKS................................................................................................ 79 LOCKS FOR REFRIGERATED VANS - SPARE PARTS............................. 82 REAR DOOR HINGES................................................................................... 86 BRACKETS FOR REAR DOOR HINGES.................................................... 87 BRACKETS FOR REAR DOOR HINGES - SPARE PARTS...................... 94 REAR DOOR HINGES - SPARE PARTS...................................................... 95 RECESSED REAR DOOR HINGES.............................................................. 96 EXTERNAL SIDE DOOR HINGES.............................................................. 99 RECESSED SIDE DOOR HINGES.............................................................104 CONTINUOUS POLIALL HINGES...........................................................106 CONTINUOUS HINGES............................................................................109 ALUMINIUM HINGES.................................................................................110 OTHER HINGES...........................................................................................111 UNDER CHASSIS DOOR RETAINERS.....................................................115 LATERAL DOOR RETAINERS....................................................................117 MEAT TRANSPORT RAIL SYSTEM..........................................................124 MEAT TRANSPORT TUBOLAR SYSTEM................................................126 SIDE WALL MEAT TRANSPORTATION .................................................129 SECOND MOBILE PLATFORM.................................................................130 LIFTING ARMS SYSTEM WITH RAIL AND RACK...............................135 LIFTERS FOR INNER WALL.......................................................................139 LIFTER ARMS FOR LIGHT LIFTING WALL............................................143 CARGO RESTRAINT SYSTEMS................................................................144 CLOTHING TRANSPORT SYSTEM..........................................................146 SYSTEM FOR SLIDING DOOR.................................................................147 ELECTRIC AERATORS 12-24 V CE..........................................................150 SPARE PARTS FOR ELECTRIC AERATORS 12-24 V............................151 VENTILATION HATCHES FOR ISOTHERMAL VEHICLES..................153 VENTILATION HATCHES FOR ISOTHERMAL VEHICLES - SPARES.155 AERATION GRILLS......................................................................................156 FILLER FLAPS...............................................................................................157 HANDLES FOR WINDOWS......................................................................159 CEILING LIGHTS..........................................................................................160 CEILING LIGHTS - SPARE PARTS............................................................163 DRAINING BOXES.......................................................................................165 ROPE HOOKS...............................................................................................166 "CLEAR PASS" MUDFLAPS WITH ANTI SPRAY..................................167 MUDGUARDS..............................................................................................168 LADDERS AND STEPS...............................................................................170 BOX FIXING BRACKETS............................................................................171 BODY MOUNTING BRACKETS................................................................173 GUISNAP.......................................................................................................175 DUAL HARDNESS PVC SEALS................................................................177 RUBBER PROFILES AND OTHER PROFILES........................................180 WINDOW SEALS.........................................................................................181

Catalogo 2014 eng.indb 11

DOOR SEALS................................................................................................183 BUFFERS........................................................................................................186 NEOPRENE BUFFERS.................................................................................191 TOGGLE LATCHES......................................................................................193 CLIMBING HANDLE...................................................................................194 DOOR PULL HANDLES.............................................................................195 EXTERNAL LOCKS......................................................................................196 RECESSED LOCKS WITH S.S. PLUNGER...............................................200 RECESSED LOCKS WITH NYLON PLUNGER........................................201 RECESSED LOCKS - SPARE PARTS.........................................................202 SPRING BOLT LATCH.................................................................................203 INTERNAL LOCKS.......................................................................................204 LATCHES........................................................................................................207 BONNET HOOKS.........................................................................................208 GAS SPRINGS ..............................................................................................209 GAS SPRING BRACKETS...........................................................................215 HINGES FOR SIDE BOARDS.....................................................................219 SIDE BOARD LOCKS..................................................................................221 ALUMINIUM PILLARS................................................................................224 HOOP FITTINGS..........................................................................................226

Indexes

INDEXES

02/07/2014 10:01:17

NEWS

Catalogo 2014 eng.indb 12

02/07/2014 10:01:18

STAINLESS STEEL FOLDING SHELF MODULE 1000x500 (EFFECTIVE SURFACE) ITEM NO.

SUPPORTING ARMS S.S. AISI 304

CENTRAL HORIZ. ELEMENT S.S. AISI 441

Catalogo 2014 eng.indb 13

DESCRIpTION

072726348B

VERTICAL PILLAR L.500 MM WITH PIN S.S. AISI 304

REAR ELEMENT S.S. AISI 441

FRONT ELEMENT S.S. AISI 441

SHIM S.S. AISI 441

FIXING ANGLE BAR S.S. AISI 441

072726353

SQUARE BLACK CAP 30x30

072726489

ANGULAR PROTECTION BLACK

02/07/2014 10:01:19

STAINLESS STEEL FOLDING SHELF MODULE 1000x420 (EFFECTIVE SURFACE) ITEM NO.

SUPPORTING ARMS S.S. AISI 304

CENTRAL HORIZ. ELEMENT S.S. AISI 441

Catalogo 2014 eng.indb 14

DESCRIpTION

072726348B

VERTICAL PILLAR L.500 MM WITH PIN S.S. AISI 304

REAR ELEMENT S.S. AISI 441

FRONT ELEMENT S.S. AISI 441

SHIM S.S. AISI 441

FIXING ANGLE BAR S.S. AISI 441

072726353

SQUARE BLACK CAP 30x30

072726489

ANGULAR PROTECTION BLACK

02/07/2014 10:01:21

COMpLETE INTERNAL OpENING DEVICE WITH LOW pROFILE, ITEM 071927181

Catalogo 2014 eng.indb 15

•

THIS SYSTEM CAN BE APPLIED ONLY TO RECESSED DOOR LOCKS

•

TO BE INSTALLED ON PANELS WITH A MINIMUM THICKNESS OF 45 MM AND RECESSED DOOR LOCK WITH HEIGHT 23,5 MM

•

HIGH SMOOTHNESS OF THE OPENING DEVICE

•

WITH FLUORESCENT ADHESIVE LABEL ON THE OPENING DEVICE

02/07/2014 10:01:23

Door locks

RECESSED DOOR LOCKS

Recessed locks are door closing/opening devices that do not extend beyond the door surface. The rod that operates the latch pawls is embedded in the door. Recessed locks are normally used on side doors, where any protruding elements are best avoided. Recessed locks consist of a housing and handle, both available under one part number. Suitable jigs ensure correct size of cutout for easy housing installation in the doors of insulated vans. It is essential that each handle be matched to its original housing, as they are tested as matched pairs during final testing at the factory, and mixing different components may result in minor discrepancies.

Use standard care and caution and follow these warnings: • •

Door locks

GENERAL SpECIFICATIONS

Model selection from catalogue range depends on a number of factors, such as door dimensions and weight, type of seal, etc., which only the customer can evaluate. Please read the operating and maintenance information (listed below) printed on the leaflet contained in the package. Add the leaflet to the vehicle documents to be handed over to final user.

USE AND MAINTENANCE OF THE CLOSING SYSTEMS Pastore & Lombardi closing systems are produced and inspected according to the strictest quality controls. Like any other mechanical device, the closing systems can be subjected to stresses than can compromise their perfect operation. The stresses borne by a means of transportation of goods are particularly difficult to predict because they depend on many variables: the load, how it is arranged, the travelling conditions and, above all, the road conditions. It is for these reasons that we are listing below the rules for correct use and maintenance of Pastore & Lombardi closing systems: 1) ALWAYS CLOSE THE CLOSING SYSTEM WITH THE KEY BECAUSE ONLY IN THIS WAY CAN AN ACCIDENTAL OpENING OF THE DOOR WHEN THE VEHICLE IS IN MOVEMENT BE pREVENTED. 2) When you close the door, be sure that the push button is perfectly hooked by forcefully pulling the handle towards you. Periodically remove deposits of dust, debris or ice that may accumulate and that could prevent the push button from perfectly hooking. 3) Be sure that the springs under the push button are not broken. If they are, immediately order spare springs from the vehicle’s manufacturer or directly from Pastore & Lombardi. Before you replace them, take appropriate steps to avoid accidental opening of the door by, for example, closing the push button by hand and turning the key. It is very simple to replace the spring and is done by slipping it onto the pin. 4) In the case the key’s revolving plug breaks or does not work properly, replace it immediately. A number is engraved on the revolving plug and key. Order the revolving plug by giving this number to the vehicle’s manufacturer or directly to Pastore & Lombardi. 5) A proper periodical cleaning of stainless steel products is recommended, so that the aesthetic aspect and the resistance to corrosion are not affected. The cleaning must be carried out by means of general neutral cleansing agents (chloride-free), to be completed with an abundant water rinsing. Metallic abrasive sponges must not be used so as not to spoil the properties of stainless steel. Contact the vehicle’s manufacturer for any clarification you may need.

Catalogo 2014 eng.indb 17

02/07/2014 10:01:26

RECESSED DOOR LOCKS FOR Ø16 MM BAR CODE

Version

Package

071425950C

S.S.

1200

Recessed handle height 23,5

Door locks

Recessed handle for aluminium or isothermal doors. Bar diameter 16 mm. Designed to open from inside. When mounting the bar, we suggest misaligning the cams with the four Spirol pins, making a hole with a Ø 5 bit, then opening the handle and welding the bar inside the slot. By misaligning we mean pulling aside the handle with respect to the cam. To obtain a 5° angle, proceed as follows: with the cam closed the handle coupling should be above the pushbutton.

CODE

Version

Package

071425951C

S.S.

1200

Recessed handle height 27,5

Catalogo 2014 eng.indb 18

02/07/2014 10:01:28

RECESSED DOOR LOCKS FOR Ø16 MM BAR CODE

Version

Package

071425952C

S.S.

1550

CODE

Version

Package

071425953C

S.S.

1575

Door locks

Recessed handle height 29

Recessed handle height 34

Catalogo 2014 eng.indb 19

02/07/2014 10:01:29

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

071923438

Package

White seal Ø mm. 16

Door locks

Nylon seal for insertion under the lip of the cup to prevent infiltration of water.

CODE

Version

071923503

Package

Black seal Black nylon seal for insertion under the lip of the cup to prevent infiltration of water.

CODE 071925201

Version

Package

Black seal Ø 16 Black nylon seal for insertion under the lip of the cup to prevent infiltration of water.

Catalogo 2014 eng.indb 20

02/07/2014 10:01:30

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

Package

071923115

S.S.

4850

071922908A

Z.PL.

4850

Bar assembled Ø 16 with welded cams. The customer is responsible for cutting the bar to the desired length. The two crop ends must be joined in the centre of the handle. The bar can then be connected by the pins and welded into the slot.

CODE

Version

080522910

Package

600

Door locks

Welded bar 3 m, Ø 16

Bar guide tube, l=3 m - Ø 16 Bar guide pipe for insertion inside door, for Ø 16 bar.

CODE

Version

071922131

Package

167

Complete internal opening device for external and recessed door locks

To mount, recess the housing inside the door according to the door thickness, cut off the sleeve in the open part and the pin so that the bottom of the sleeve touches the bottom of the cup.

Catalogo 2014 eng.indb 21

02/07/2014 10:01:31

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

Package

071920622

S.S.

071922684

Z.PL.

CODE

Version

Package

071920618A

S.S.

220

071920619A

S.S.

220

Door locks

Cam Ø 15 - Ø 16

Keeper RH-LH - Ø 15-16 Forged keeper, working depth 11 mm

CODE

Version

Package

071924146

S.S.

120

071924147

S.S.

120

Keeper RH-LH - Ø 15- Ø 16 Precision casted keeper reduced size with countersunk holes, working depth 12 mm

CODE

Version

Package

071922756

S.S.

213

071922757

S.S.

213

Keeper RH-LH - Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 16 mm

CODE

Version

Package

071922760

S.S.

172

071922761

S.S.

172

Keeper RH-LH -Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 11 mm

Catalogo 2014 eng.indb 22

02/07/2014 10:01:32

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

Package

071923950

S.S.

CODE

Version

Package

071922484A

Z.PL.

156

RH/LH keeper - Ø 15 - Ø 16

Catalogo 2014 eng.indb 23

Door locks

Cam for bar Ø16

02/07/2014 10:01:33

Door locks

RECESSED DOOR LOCKS FOR Ø 16 MM BAR - SPARE PARTS CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071915480

S.S.

Key barrel 90°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071922890A

S.S.

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071925851

S.S.

Handle return spring for external and recessed door locks

Catalogo 2014 eng.indb 24

02/07/2014 10:01:33

RECESSED DOOR LOCKS FOR Ø 16 MM BAR - SPARE PARTS CODE

Version

071926274A

S.S.

Package

g. 40

Door locks

Flap for external door locks Ø mm 16 and recessed door locks

CODE

Version

Package

071926781

S.S.

Kit of push button rh-lh springs for external door locks Ø mm 16 and recessed door locks

Catalogo 2014 eng.indb 25

02/07/2014 10:01:34

RECESSED DOOR LOCKS FOR Ø 15 MM BAR CODE

Version

Package

071425859

S.S.

665

Recessed lock APE CAR

Door locks

Recessed closing mechanism for small Bar diameter 15 mm. To mount bar, misalign the cams, makes hole in the handle and bar, then insert the two pins. Not fitted for the opening from inside.

CODE

Version

Package

071922754A

Z.PL.

4250

Welded bar z.pl. l=3 m - Ø 15 Bar assembled Ø 15 with welded cams. The customer is responsible for cutting the bar to the desired length. The two crop ends must be joined in the centre of the handle. The bar can then be connected by the pins and welded into the slot.

Catalogo 2014 eng.indb 26

02/07/2014 10:01:34

RECESSED DOOR LOCKS FOR Ø 15 - COMPONENTS CODE

Version

Package

071920622

S.S.

071922684

Z.PL.

CODE

Version

Package

071920618A

S.S.

220

071920619A

S.S.

220

Door locks

Cam Ø 15 - Ø 16

Keeper RH-LH - Ø 15-16 Forged keeper, working depth 11 mm

CODE

Version

Package

071924146

S.S.

120

071924147

S.S.

120

Keeper RH-LH - Ø 15- Ø 16 Precision casted keeper reduced size with countersunk holes, working depth 12 mm

CODE

Version

Package

071922756

S.S.

213

071922757

S.S.

213

Keeper RH-LH - Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 16 mm

CODE

Version

Package

071922760

S.S.

172

071922761

S.S.

172

Keeper RH-LH -Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 11 mm

Catalogo 2014 eng.indb 27

02/07/2014 10:01:36

RECESSED DOOR LOCKS FOR Ø 15 - COMPONENTS CODE

Version

Package

071922483

S.S.

CODE

Version

Package

071922484A

Z.PL.

156

Door locks

Cam for bar Ø 15

Catalogo 2014 eng.indb 28

RH/LH keeper - Ø 15 - Ø 16

02/07/2014 10:01:36

CODE

Key number

Package

071927035

3151

071927036

3152

071927037

3153

071927038

3154

071927039

3155

071927040

3156

071927041

3157

071927042

3158

071927043

3159

071927044

3160

CODE

Version

Package

071926015

S.S.

CODE

Version

Package

071925873

S.S.

CODE

Version

Package

071923442

S.S.

100

Key barrel 90°

Door locks

RECESSED DOOR LOCKS FOR Ø 15 MM BAR - SPARE PARTS

Spare tongue for key barrel

Handle spring for lock APE CAR

Pin Kerb 5x21 -

Catalogo 2014 eng.indb 29

02/07/2014 10:01:37

RECESSED DOOR LOCKS FOR Ø 22 MM BAR CODE

Version

Package

071926299A

S.S.

860

Recessed housing for lock Ø 22, complete with nylon bushes

Door locks

Recessed handle for isothermal rear and side doors with minimum thickness 50 mm. Housing without fixing holes. For tube Ø 22 mm. Any type of 22 mm diam. cam or keeper can be used. Not fitted for the opening from inside.

CODE

Version

Package

071925948D

S.S.

1450

External locking device Ø22 External handle designed for opening from inside

CODE

Version

Package

071922133

S.S.

190

Tube guide Ø 22

Used to keep the pipe in the correct position inside the door. Also serves as a keeper for the anti-rack washer of the cam. The guide pipe can be mounted either recessed or externally according to the keeper distance and the length of the tang of the cam

Catalogo 2014 eng.indb 30

02/07/2014 10:01:38

RECESSED DOOR LOCKS FOR Ø 27 MM BAR CODE

Version

Package

071926298A

S.S.

950

Recessed handle for isothermal rear and side doors with minimum thickness 50 mm. Housing without fixing holes. For tube Ø 27 mm. Any type of 27 mm diam. cam or keeper can be used. Not fitted for the opening from inside.

CODE

Version

Package

071925189F

S.S.

2285

Door locks

Recessed housing for lock Ø 27

external door gears Ø27 External handle for large-sized doors, designed for opening from inside

CODE

Version

Package

071922651

S.S.

250

Tube guide - Ø 27

Catalogo 2014 eng.indb 31

02/07/2014 10:01:39

Door locks

RECESSED DOOR LOCKS PREVIOUS VERSIONS - SPARE PARTS CODE

Key number

Package

071927025

3001

071927026

3002

071927027

3003

071927028

3004

071927029

3005

071927030

3006

071927031

3007

071927032

3008

071927033

3009

071927034

3010

CODE

Version

Package

071915480

S.S.

Key barrel 180°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071926780

S.S.

Kit of push button rh-lh springs for external door locks and recessed door locks previous models

CODE

Version

Package

071922890

S.S.

Flap spring for previous models of external door locks

Ø6

For all types of closures 28

Catalogo 2014 eng.indb 32

02/07/2014 10:01:40

RECESSED DOOR LOCKS PREVIOUS VERSIONS - SPARE PARTS CODE

Version

Package

071922907

S.S.

CODE

Version

Package

071925016

S.S.

CODE

Version

Package

071921929

S.S.

Key barrel cover for recessed locks, 34 mm-Ă&#x2DC; 16

Door locks

Flap for previous models of external and recessed door locks

Handle return spring for previous models of external and recessed door locks

CODE

Version

Package

071926011

S.S.

CODE

Version

Package

071924614

mm. 5x21

100

071924493

mm. 5x23

100

Handle spring

Spirol pin 5

21-23

Catalogo 2014 eng.indb 33

02/07/2014 10:01:41

Door locks

EXTERNAL LOCKS

• LATCH PAWLS AND STRIKERS – This mechanism causes the rod to rotate and overcome seal friction to push the door slightly ajar or pull it close. Model selection from the catalogue range depends on a number of factors, such as door dimensions and weight, type of seal, and so on, which only the customer can evaluate correctly. • HANDLES AND LEVERS – They cause the rod to rotate and operate the latches. Handles require no additional components, whereas levers must be supplemented with a stop and a fastener, available as a kit. • ROD KEEPERS – They keep the rod in the correct position during rotation and act as end stops for the anti-rack washers. Our keepers feature nylon bushings for smoother rod rotation and perfect rod alignment • RODS – Exterior locks are grouped by rod diameter. Available sizes are Ø 16, 22 and 27.

Door locks

Exterior locks are opening/closing devices installed on the outside of a door. Since they extend beyond the door surface, they are normally used on rear doors. Exterior locks consist of various elements: LATCH PAWLS AND STRIKERS, HANDLES OR LEVERS, ROD KEEPERS, ROD.

Use standard care and caution and follow these warnings: • Model selection from catalogue range depends on a number of factors, such as door dimensions and weight, type of seal, etc. • During installation, the anti-rack washer of the pawl (or welded to the rod) must be resting on the fastener to avoid minor door movements that would affect hinges and locks. • Please read the operating and maintenance information ( listed below) printed on the leaflet contained in the package. Add the leaflet to the vehicle documents to be handed over to final user. USE AND MAINTENANCE OF THE CLOSING SYSTEMS Pastore & Lombardi closing systems are produced and inspected according to the strictest quality controls. Like any other mechanical device, the closing systems can be subjected to stresses than can compromise their perfect operation. The stresses borne by a means of transportation of goods are particularly difficult to predict because they depend on many variables: the load, how it is arranged, the travelling conditions and, above all, the road conditions. It is for these reasons that we are listing below the rules for correct use and maintenance of Pastore & Lombardi closing systems: 1. ALWAYS CLOSE THE CLOSING SYSTEM WITH THE KEY BECAUSE ONLY IN THIS WAY CAN AN ACCIDENTAL OpENING OF THE DOOR WHEN THE VEHICLE IS IN MOVEMENT BE pREVENTED. 2. When you close the door, be sure that the push button is perfectly hooked by forcefully pulling the handle towards you. Periodically remove deposits of dust, debris or ice that may accumulate and that could prevent the push button from perfectly hooking. 3.

Be sure that the springs under the push button are not broken. If they are, immediately order spare springs from the vehicle’s manufacturer or directly from Pastore & Lombardi. Before you replace them, take appropriate steps to avoid accidental opening of the door by, for example, closing the push button by hand and turning the key. It is very simple to replace the spring and is done by slipping it onto the pin. In the case the key’s revolving plug breaks or does not work properly, replace it immediately. A number is engraved on the revolving plug and key. Order the revolving plug by giving this number to the vehicle’s manufacturer or directly to Pastore & Lombardi.

5. A proper periodical cleaning of stainless steel products is recommended, so that the aesthetic aspect and the resistance to corrosion are not aﬀected. The cleaning must be carried out by means of general neutral cleansing agents (chloride-free), to be completed with an abundant water rinsing. Metallic abrasive sponges must not be used so as not to spoil the properties of stainless steel. Contact the vehicle’s manufacturer for any clarification you may need.

Catalogo 2014 eng.indb 35

02/07/2014 10:01:45

Door locks

EXTERNAL LOCKS Ø 16 MM

EXTERNAL LOCKS Ø 16 MM CODE

Version

Package

071925949B

S.S.

960

External door handles Ø16

Door locks

External handle designed for opening from inside.

CODE

Version

Package

071323606A

Z.PL.

815

Kit lever, lever stay and lever clamp

Catalogo 2014 eng.indb 37

02/07/2014 10:01:46

EXTERNAL LOCKS Ă&#x2DC; 16 MM - COMPONENTS CODE

Version

Package

071923641

S.S.

130

071923643

Z.PL.

130

CODE

Version

Package

071923642

S.S.

190

071923644

Z.PL.

200

Version

Package

167

Door locks

Forged cam

Forged keeper

CODE 071922131

Complete internal opening device for external and recessed door locks

To mount, recess the housing inside the door according to the door thickness, cut off the sleeve in the open part and the pin so that the bottom of the sleeve touches the bottom of the cup.

Catalogo 2014 eng.indb 38

02/07/2014 10:01:47

EXTERNAL LOCKS Ø 16 MM - COMPONENTS CODE

Version

Package

071913158

S.S.

071913159

Z.PL.

100

Version

Package

100

CODE 071912972

Door locks

Tube clamp

Nylon half bush

CODE

Version

Package

071913154

S.S.

071913155

Z.PL.

CODE

Version

Package

071913949

S.S.

1700

071913148

Z.PL.

1700

Antirack washer

Z.pl. tube Ø 16, l=2500 mm

Catalogo 2014 eng.indb 39

02/07/2014 10:01:48

EXTERNAL LOCKS Ă&#x2DC; 16 MM - SETS CODE

Version

Package

071222163A

S.S.

1070

071322164A

Z.PL.

1070

Kit of components for Ă&#x2DC; 16 tube

Door locks

Art.

Inox/S.S./Nirosta

Nr.

0719 23642

Scontro/Keeper/Gegenhalter

0719 23641

Arpione/Cam/Schliesskeil

0719 13154

Rondella/Washer/Unterlegscheibe

0719 12972

Semiboccola/Half bush/Halbbuchse

0719 13158

Fissaggio/Clamp/Befestigung

Art. A

Zinc./Z.PL./Verz.

Nr.

0719 23644

Scontro/Keeper/Gegenhalter

0719 23643

Arpione/Cam/Schliesskeil

0719 13155

Rondella/Washer/Unterlegscheibe

0719 12972

Semiboccola/Half bush/Halbbuchse

0719 13159

Fissaggio/Clamp/Befestigung

The anti-rack washer is welded on the tube by the user. Measurement x is therefore undefined.

Catalogo 2014 eng.indb 40

02/07/2014 10:01:49

EXTERNAL LOCKS Ă&#x2DC; 16 MM - SPARE PARTS CODE

Version

Package

071913139

Z.PL.

419

CODE

Version

Package

071913145

Z.PL.

135

CODE

Version

Package

071913146

S.S.

CODE

Version

Package

071913141

Z.PL.

216

CODE

Version

Package

071913142

S.S.

Lever clamp to weld on

Door locks

Flat lever with tongue for padlock or customs seal

Lever clamp pin

Lever stay without bush

Lever stay bush

Catalogo 2014 eng.indb 41

02/07/2014 10:01:50

Door locks

EXTERNAL LOCKS Ø 16 MM - SPARE PARTS CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071915480

S.S.

Key barrel 90°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071922890A

S.S.

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071925851

S.S.

Handle return spring for external and recessed door locks

Catalogo 2014 eng.indb 42

02/07/2014 10:01:51

EXTERNAL LOCKS Ø 16 MM - SPARE PARTS CODE

Version

071926274A

S.S.

Package

g. 40

Door locks

Flap for external door locks Ø mm 16 and recessed door locks

CODE

Version

Package

071926781

S.S.

Kit of push button rh-lh springs for external door locks Ø mm 16 and recessed door locks

Catalogo 2014 eng.indb 43

02/07/2014 10:01:51

Door locks

EXTERNAL LOCKS Ø 22 MM

EXTERNAL LOCKS Ø 22 MM CODE

Version

Package

071925948D

S.S.

1450

External locking device Ø22

Door locks

External handle designed for opening from inside

CODE

Version

Package

071915128

S.S.

694

071915129

Z.PL.

680

Delta lever with coated handle for external door locks Ø mm22/ 27 Delta lever with coated grip, allows excellent grasp when opening door.

CODE

Version

Package

071922018A

S.S.

995

071922019

Z.PL.

965

flat lever with coated handle for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 45

02/07/2014 10:01:53

EXTERNAL LOCKS Ø 22 MM CODE

Version

Package

071226304

S.S.

365

071326341

Z.PL.

320

Kit Lever clamp Art.

Door locks

Inox/S.S./Nirosta

0719 17420A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12447 Vite TE -Screw-Schraube 12X25

0719 12448 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

Art. A

Zinc./Z.PL./Verz.

0719 17421A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12449 Vite TE -Screw-Schraube 12X25

0719 11183 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

CODE

Version

Package

071326310

Z.PL.

210

Kit lever clamp for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 46

02/07/2014 10:01:53

EXTERNAL LOCKS Ø 22 MM CODE

Version

Package

071919340

S.S.

720

071919341

Z.PL.

720

Lever stay TIR for external door locks Ø mm. 22/27

Door locks

TIR lever stay with spring cover to cover customs seal.

CODE

Version

Package

071920299A

S.S.

248

071920300A

Z.PL.

253

standard lever stay with holes Ø mm. 8,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 8,5 mm

CODE

Version

Package

071921569A

Z.PL.

250

Zinc plated standard lever stay with holes Ø mm.6,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 6,5 mm

Catalogo 2014 eng.indb 47

02/07/2014 10:01:54

EXTERNAL LOCKS Ă&#x2DC; 22 MM - COMPONENTS CODE

Version

Package

071921024A

S.S.

333

071926412

Z.PL.

350

Door locks

Cam BIG 6

BIG 6 cam with antirack washer machined on shank.

CODE

Version

Package

071922443

S.S.

580

Cam BIG 9 BIG 9 cam with antirack washer machined on elongated shank for seal bypass.

CODE

Version

Package

071921023

S.S.

349

071926413

Z.PL.

350

Keeper for BIG 6 - BIG 9

Catalogo 2014 eng.indb 48

02/07/2014 10:01:55

EXTERNAL LOCKS Ă&#x2DC; 22 MM - COMPONENTS CODE

Version

Package

071921021

S.S.

440

CODE

Version

Package

071921020

S.S.

136

071923588

Z.PL.

130

Version

Package

100

Door locks

Tube clamp

Small tube clamp

CODE 071921019A Nylon bush

Catalogo 2014 eng.indb 49

02/07/2014 10:01:56

EXTERNAL LOCKS Ø 22 MM - COMPONENTS CODE

Version

Package

071926024

S.S.

580

071926029A

Z.PL.

650

CODE

Version

Package

071924349A

S.S.

440

071924351A

Z.PL.

442

CODE

Version

Package

071924339

S.S.

250

071924341

Z.PL.

253

Version

Package

100

Door locks

tube clamp BIG for external door locks Ø mm 22/27

tube clamp MEDIUM for external door locks Ø 22/27

tube clamp SMALL for external door locks Ø mm 22/27

CODE 071924130 Nylon bush Ø22

Catalogo 2014 eng.indb 50

02/07/2014 10:01:57

EXTERNAL LOCKS Ø 22 MM - COMPONENTS CODE

Version

071924985

Package

221

Rubber tube-clamp for side protection. To use as intermediate tube clamp. While rear door opening, the handle do not beat against to the sidewall. CODE

Version

071924669

Package

White Nylon half-bush

Door locks

Rubber buffer rod Ø mm 22/27

Half-bush for rubberpuffer(2 half-bushes for 1 rubberpuffer)

CODE

Version

Package

071913831

S.S.

071913832

Z.PL.

CODE

Version

Package

071916344

S.S.

2450

CODE

Version

Package

071923656

S.S.

2950

071913993

Z.PL.

3000

Antirack washer

S.S. tube, polished, Ø 22x2x2500 mm.

tube, polished, Ø 22x2x3000 mm.

Catalogo 2014 eng.indb 51

02/07/2014 10:01:58

EXTERNAL LOCKS Ø 22 MM - SETS CODE

Version

Package

071226319

S.S.

1870

071326414

Z.PL.

1900

External door gear kit Tube BIG 6 Ø22

Door locks

Art.

Inox/S.S./Nirosta

0719 21023

0719 21024A Arpione/Cam/Schliesskeil

0719 13831

0719 21019A Boccola/Bush/Buchse

0719 21020

Art.

Scontro/Keeper/Gegenhalter

Rondella/Washer/Unterlegscheibe

Fissaggio/Clamp/Befestigung

Zinc./Z.PL./Verz.

Nr.

0719 26413

Scontro/Keeper/Gegenhalter

0719 26412

Arpione/Cam/Schliesskeil

0719 13832

Rondella/Washer/Unterlegscheibe

0719 21019A Boccola/Bush/Buchse

0719 23588

Fissaggio/Clamp/Befestigung

The anti-rack washer is welded on the tube by the user. Measurement x is therefore undefined.

CODE

Version

Package

071222167A

S.S.

2565

External door gear Kit BIG 6 Ø22 Art.

Nr.

0719 21023

0719 21024A Arpione/Cam/Schliesskeil

Scontro/Keeper/Gegenhalter

0719 21019A Boccola/Bush/Buchse

0719 21021

Fissaggio/Clamp/Befestigung

0719 21020

Fissaggio/Clamp/Befestigung

The anti-rack washer is an integral part of the forged cam, the measurement on the drawing cannot be modified.

Catalogo 2014 eng.indb 52

02/07/2014 10:01:59

EXTERNAL LOCKS Ø 22 MM - SPARE PARTS CODE

Version

Package

071917420A

S.S.

266

071917421A

Z.PL.

270

Lever clamp

CODE

Version

Package

071921602

S.S.

155

071921603

Z.PL.

170

Door locks

Lever fastened with square hole for clampby welding.

lever clamp to be welded for external door locks Ø mm. 22/27

CODE

Version

Package

071912447

S.S.

071912449

Z.PL.

CODE

Version

Package

071912448

S.S.

071911183

Z.PL.

screw TE M12x25 for external door locks Ø mm. 22/27

nut M12 low version for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 53

02/07/2014 10:02:01

EXTERNAL LOCKS Ø 22 MM - SPARE PARTS CODE

Version

Package

071912453

S.S.

Door locks

Spacing bush for screw of external door locks Ø mm. 22/27

CODE

Version

Package

071913942

S.S.

Pin to be welded or riveted for external door locks Ø mm. 22/27

CODE

Version

Package

071921933

S.S.

CODE

Version

Package

071920301

S.S.

Spring for lever stay TIR

Bush for lever stay for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 54

02/07/2014 10:02:01

CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071915480

S.S.

Door locks

EXTERNAL LOCKS Ø 22 MM - SPARE PARTS

Key barrel 90°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071922890A

S.S.

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071926918A

S.S.

Handle spring

Catalogo 2014 eng.indb 55

02/07/2014 10:02:02

EXTERNAL LOCKS Ă&#x2DC; 22 MM - SPARE PARTS CODE

Version

071926152A

S.S.

Package

g. 40

Door locks

Flap

CODE

Version

Package

071926939

S.S.

Kit push-button spring

Catalogo 2014 eng.indb 56

02/07/2014 10:02:03

Door locks

EXTERNAL LOCKS Ø 27 MM

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071925189F

S.S.

2285

external door gears Ø27

Door locks

External handle for large-sized doors, designed for opening from inside

CODE

Version

Package

071926520

S.S.

2160

external door gears Ø27 External handle for large-sized doors, designed for opening from inside

CODE

Version

Package

071926883

S.S.

2060

external door gears Ø27 External handle for large-sized doors, designed for opening from inside

Catalogo 2014 eng.indb 58

02/07/2014 10:02:04

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071915128

S.S.

694

071915129

Z.PL.

680

Delta lever with coated grip, allows excellent grasp when opening door.

CODE

Version

Package

071922018A

S.S.

995

071922019

Z.PL.

965

Door locks

Delta lever with coated handle for external door locks Ø mm22/ 27

flat lever with coated handle for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 59

02/07/2014 10:02:05

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071226309

S.S.

390

071326342

Z.PL.

370

Kit Lever clamp Art.

Door locks

Inox/S.S./Nirosta

0719 17418A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12447 Vite TE -Screw-Schraube 12X25

0719 12448 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

Art. A

Zinc./Z.PL./Verz.

0719 17419A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12449 Vite TE -Screw-Schraube 12X25

0719 11183 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

CODE

Version

Package

071326310

Z.PL.

210

Kit lever clamp for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 60

02/07/2014 10:02:06

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071919340

S.S.

720

071919341

Z.PL.

720

Lever stay TIR for external door locks Ø mm. 22/27

Door locks

TIR lever stay with spring cover to cover customs seal.

CODE

Version

Package

071920299A

S.S.

248

071920300A

Z.PL.

253

standard lever stay with holes Ø mm. 8,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 8,5 mm

CODE

Version

Package

071921569A

Z.PL.

250

Zinc plated standard lever stay with holes Ø mm.6,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 6,5 mm

Catalogo 2014 eng.indb 61

02/07/2014 10:02:06

EXTERNAL LOCKS Ø 27 MM - COMPONENTS CODE

Version

075022423

S.S.

Package

g. 1000

Cam BIG 2 for tube Ø27x2,5

Door locks

BIG 2 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071922679

S.S.

1012

Cam BIG 2 for tube Ø27x3 BIG 2 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071919407A

S.S.

624

Cam BIG 3 Cam BIG3 with antirack washer machined on shank.

CODE

Version

Package

071917544A

S.S.

584

Keeper for BIG 2 - BIG 3 -

Catalogo 2014 eng.indb 62

02/07/2014 10:02:08

EXTERNAL LOCKS Ă&#x2DC; 27 MM - COMPONENTS CODE

Version

Package

071921968

S.S.

524

071922382

Z.PL.

513

Cam BIG 4 flattened

CODE

Version

Package

071921969

S.S.

501

071922383

Z.PL.

512

CODE

Version

Package

071921088

S.S.

786

Door locks

BIG 4 cam with antirack washer machined on shank.

Keeper for BIG 4

Cam BIG 5 BIG 5 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071921089

S.S.

561

Keeper BIG 5

Catalogo 2014 eng.indb 63

02/07/2014 10:02:08

EXTERNAL LOCKS Ø 27 MM - COMPONENTS CODE

Version

Package

071926024

S.S.

580

071926029A

Z.PL.

650

CODE

Version

Package

071924349A

S.S.

440

071924351A

Z.PL.

442

CODE

Version

Package

071924339

S.S.

250

071924341

Z.PL.

253

Version

Package

100

Door locks

tube clamp BIG for external door locks Ø mm 22/27

tube clamp MEDIUM for external door locks Ø 22/27

tube clamp SMALL for external door locks Ø mm 22/27

CODE 071924131 Nylon bush Ø27

Catalogo 2014 eng.indb 64

02/07/2014 10:02:09

EXTERNAL LOCKS Ă&#x2DC; 27 MM - COMPONENTS CODE

Version

Package

071916324

S.S.

3950

CODE

Version

Package

071922444

S.S.

4850

CODE

Version

Package

071921058

S.S.

4458

071911463

Z.PL.

4450

CODE

Version

Package

071923636

S.S.

4650

Door locks

S.s. tube 3000x27x2,5 mm

S.S. tube, polished, 2700x27x3 mm

STEEL TUBE, 3000X27X2,5 MM

S.S. tube, polished, 3300x27x2,5 mm

Catalogo 2014 eng.indb 65

02/07/2014 10:02:10

EXTERNAL LOCKS Ø 27 MM - COMPONENTS CODE

Version

071924985

Package

221

Rubber buffer rod Ø mm 22/27

Door locks

Rubber tube-clamp for side protection. To use as intermediate tube clamp. While rear door opening, the handle do not beat against to the sidewall.

CODE

Version

071921103

Package

100

Bush for rubber puffer

CODE

Version

Package

071911258A

S.S.

071911259A

Z.PL.

100

Antirack washer

Catalogo 2014 eng.indb 66

02/07/2014 10:02:11

EXTERNAL LOCKS Ø 27 MM - SETS CODE

Version

Package

071225570A

S.S.

3300

071326415

Z.PL.

3330

External door gear kit BIG 4 Ø27

Inox/S.S./Nirosta

Nr.

0719 21969

Scontro/Keeper/Gegenhalter

0719 21968

Arpione/Cam/Schliesskeil

0719 11258A Rondella/Washer/Unterlegscheibe

0719 24131

0719 24349A Fissaggio/Clamp/Befestigung

0719 24339

Fissaggio/Clamp/Befestigung

0719 22383

Scontro/Keeper/Gegenhalter

0719 22382

Arpione/Cam/Schliesskeil

Art.

C D E F

Boccola/Bush/Buchse

Zinc./Z.PL./Verz.

Nr.

0719 11259A Rondella/Washer/Unterlegscheibe 0719 24131

Boccola/Bush/Buchse

0719 24351A Fissaggio/Clamp/Befestigung

Fissaggio/Clamp/Befestigung

0719 24341

Door locks

Art. A

The anti-rack washer is welded on the tube by the user. Measurement x is therefore undefined.

CODE

Version

Package

071226125

S.S.

3646

071322189E

Z.PL.

3663

External door gear kit BIG 4 Ø27 Art. A

0719 21969

Nr. Scontro/Keeper/Gegenhalter

0719 21968

Arpione/Cam/Schliesskeil

0719 24131

Boccola/Bush/Buchse

0719 26024

Fissaggio/Clamp/Befestigung

0719 24339

Fissaggio/Clamp/Befestigung

Art.

Nr.

0719 22383

Scontro/Keeper/Gegenhalter

0719 22382

Arpione/Cam/Schliesskeil

0719 24131

Boccola/Bush/Buchse

0719 26029A Fissaggio/Clamp/Befestigung

0719 24341

Fissaggio/Clamp/Befestigung

The anti-rack washer is an integral part of the forged cam, the measurement on the drawing cannot be modified.

Catalogo 2014 eng.indb 67

02/07/2014 10:02:13

EXTERNAL LOCKS Ø 27 MM - SETS CODE

Version

Package

071226305

S.S.

3750

External door gear KIT BIG 3 Ø27

Door locks

The anti-rack washer is an integral part of the forged cam the measurement on the drawing cannot be modified.

Catalogo 2014 eng.indb 68

02/07/2014 10:02:13

EXTERNAL LOCKS Ø 27 MM - SPARE PARTS CODE

Version

Package

071917418A

S.S.

315

071917419A

Z.PL.

335

Lever clamp

CODE

Version

Package

071921602

S.S.

155

071921603

Z.PL.

170

Door locks

Lever fastened with square hole for clampby welding.

lever clamp to be welded for external door locks Ø mm. 22/27

CODE

Version

Package

071912447

S.S.

071912449

Z.PL.

CODE

Version

Package

071912448

S.S.

071911183

Z.PL.

screw TE M12x25 for external door locks Ø mm. 22/27

nut M12 low version for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 69

02/07/2014 10:02:14

EXTERNAL LOCKS Ø 27 MM - SPARE PARTS CODE

Version

Package

071912453

S.S.

Door locks

Spacing bush for screw of external door locks Ø mm. 22/27

CODE

Version

Package

071913942

S.S.

Pin to be welded or riveted for external door locks Ø mm. 22/27

CODE

Version

Package

071921933

S.S.

CODE

Version

Package

071920301

S.S.

Spring for lever stay TIR

Bush for lever stay for external door locks Ø mm. 22/27

Catalogo 2014 eng.indb 70

02/07/2014 10:02:15

CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071926677

S.S.

CODE

Version

Package

071922890A

S.S.

Door locks

EXTERNAL LOCKS Ø 27 MM - SPARE PARTS

Key barrel 90°

Spare tongue for key barrel

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071926918A

S.S.

Handle spring

Catalogo 2014 eng.indb 71

02/07/2014 10:02:16

EXTERNAL LOCKS Ă&#x2DC; 27 MM - SPARE PARTS CODE

Version

Package

071925190C

S.S.

CODE

Version

Package

071926939

S.S.

Door locks

Flap

Kit push-button spring

Catalogo 2014 eng.indb 72

02/07/2014 10:02:17

CODE

Key number

Package

071927025

3001

071927026

3002

071927027

3003

071927028

3004

071927029

3005

071927030

3006

071927031

3007

071927032

3008

071927033

3009

071927034

3010

CODE

Version

Package

071915480

S.S.

Key barrel 180째

Door locks

EXTERNAL LOCKS PREVIOUS VERSIONS - SPARE PARTS

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071921929

S.S.

Handle return spring for previous models of external and recessed door locks

CODE

Version

Package

071926011

S.S.

Handle spring

Catalogo 2014 eng.indb 73

02/07/2014 10:02:18

EXTERNAL LOCKS PREVIOUS VERSIONS - SPARE PARTS CODE

Version

Package

071922907

S.S.

Door locks

Flap for previous models of external and recessed door locks

CODE

Version

Package

071926780

S.S.

Kit of push button rh-lh springs for external door locks and recessed door locks previous models

CODE

Version

Package

071922890

S.S.

Flap spring for previous models of external door locks

Ă&#x2DC;6

For all types of closures 28

Catalogo 2014 eng.indb 74

02/07/2014 10:02:19

Door locks

REAR DOOR LOCK

REAR DOOR LOCK DESCRIPTION Locking devices for truck rear doors, includes one handle with its base and one cam with its keeper.

Door locks

TECHNICAL FEATURES

•

The stainless-steel push buttons retained in the locked position by two independent stainless-steel springs ensure safe locking.

•

Pre-drilled holes for safety padlock (not included in the package) to prevent accidental opening.

•

Handle features ergonomic design and non-slip grip.

•

Can be opened with one hand by pressing the release push button.

•

Provision for customs seals: handle and base feature suitable slots in compliance with TIR HANDBOOK (UNECE TIR CONVENTION, Geneve 1975 Annex 2) ready to accommodate customs wire and lead seals.

•

One of the bolts retaining the base and the keeper to the frame is protected to prevent tampering from the outside, so that no welding is required for compliance with customs regulations.

•

Corrosion strength: The DACROMET 320 B coating offers a protection from red corrosion exceeding 1,000 salt spray hours in accordance with UNI ISO 9227-93.

•

Packaging: carton box, one pair in each box.

INSTALLATION Use 3 M 8 bolts to secure the base to the frame Use 2 M 8 bolts to secure the keeper to the frame Two marks facilitate drilling the holes for the pins to mount handle and swivel rod cam on the door. Welding is also possible. Any changes to the components of the locking device will automatically invalidate any manufacturer’s liability rights.

Use standard care and caution and follow these warnings:

• •

Catalogo 2014 eng.indb 76

Provide adequate arrangements to prevent axial and radial movement of the swivel rod in the door, considering door size and design and the number of locking devices mounted on each door. Make sure to allow an adequate pull angle between handle and cam so as to ensure that the door can be closed properly, considering the type of swivel rod and door seals used and the number of locking devices mounted on each door.

02/07/2014 10:02:22

REAR DOOR LOCK SL2 CODE

Version

071327344

Package

4340

Set of two locking devices composed of: 2 cams + 2 keepers + 2 levers + 2 bases with GEOMET treatment

Door locks

The push button, springs and bolt are in stainles steel

CODE

Version

071927139

Package

200

Door Holder Set for the Under Door Lock SL2

CODE

Version

Package

071924359

S.S.

100

Spirol pins mm. 5X30

Catalogo 2014 eng.indb 77

02/07/2014 10:02:23

REAR DOOR LOCK SLIM CODE

Version

071324718C

Package

5280

Set of two locking devices composed of: 2 cams + 2 keepers + 2 levers + 2 bases with GEOMET treatment

Door locks

The push buttons, springs and bolts are in stainless steel

CODE

Version

Package

075025299B

g. 240

Chromiting push button protection GEOMET

CODE

Version

Package

071924359

S.S.

100

Spirol pins mm. 5X30

Catalogo 2014 eng.indb 78

02/07/2014 10:02:24

Door locks

CATCH LOCKS

Door locks

Use standard care and caution and follow these warnings:

Catalogo 2014 eng.indb 80

•

During the assembly, check that distance between door and pillar allows the nib, when fully out, to go beyond the centre of the keeper roller by at least 3 mm.

•

When the door is closed, ensure that the nib is fully extended under the roller.

•

Do not close the door if locked, the key barrel might break.

02/07/2014 10:02:27

LOCKS FOR REFRIGERATED VANS CODE

Version

Package

071625856

S.S.

1200

Lock without keeper for side doors, specially used in vans for delivering ice cream and frozen food products. When locked, the lever can be raised but does not come into contact with the nib.

CODE

Version

Package

071626904

S.S.

200

Door locks

Lock without catch

S.S. recessed catch with roll adjustable in height by screws and shims

CODE

Version

Package

071625858

S.S.

345

Flush mounted S.S. catch with roll not adjustable in height

Catalogo 2014 eng.indb 81

02/07/2014 10:02:28

LOCKS FOR REFRIGERATED VANS - SPARE PARTS CODE

Version

071922701A

Package

Door locks

Key barrel with cover device

CODE

Version

Package

071915479

S.S.

CODE

Version

Package

071921934

S.S.

Tongue

Spring

Catalogo 2014 eng.indb 82

02/07/2014 10:02:28

LOCKS FOR REFRIGERATED VANS CODE

Version

Package

071626109

S.S.

1190

Recessed lock complete with striker for side doors. When locked, the lever cannot be raised. The striker roll is height adjustable by means of screws and shims.

CODE

Version

Package

071626356

S.S.

188

Package

Door locks

Recessed lock with catch

S.S. recessed catch with roll adjustable in height by screws and shims

CODE 071926153

Version

Key barrel with cover device

Catalogo 2014 eng.indb 83

02/07/2014 10:02:29

Hinges

REAR DOOR HINGES

REAR DOOR HINGES Rear hinges are normally used on the rear doors of vehicles and must meet particular requirements in terms of strength, operation and appearance. Rear hinges are normally supplied disassembled: HINGE, BASE, PIN and NUT.

Hinge components – base, pin and nut – are identified by individual part numbers and are also available as a kit under one part number. Rear hinges permit 270-degree rotation so the rear door can swing open until resting near the vehicle side. All rear hinges incorporate integrated nylon bushings to ensure smooth pin rotation, whereas the pin is integral with the raised edges of the base.

Hinges

HINGE

BASE There are different base designs available: • flat base – secured to rear end only • angle base – secured to rear and side ends • welding base – for use on metal rear frames

pIN AND NUT The pin has a threaded end and a crowned head at the other end. A stop tab on the pin fits into a slot in the raised edge of the base to prevent pin rotation. Do not overtighten the nut or you might damage the bushing collar. Correct operation is ensured when the raised edges of the base contact the hinge bushings.

OTHER REAR HINGES The family includes two-knuckle hinges that are supplied assembled. This design ensures limited protrusion over the rear end or a nearly flush mount.

Use standard care and caution and follow these warnings:

Catalogo 2014 eng.indb 85

•

The pin nut must be at the bottom end.

•

Each door must be fitted with a number of hinges suitable for the load capacity of the vehicle.

•

For installation, use screws of adequate size for the mounting holes and with suitable strength to withstand the load.

•

Periodically ensure that fasteners are properly tightened.

02/07/2014 10:02:32

REAR DOOR HINGES CODE

Version

Package

070120776A

S.S.

1090

070220777A

Z.PL.

1095

Rear door hinge BIG H=33

Hinges

Large-sized hinge. The reduced overhang of the neck (33 mm) makes this hinge suitable for recessing into rear profiles.for recessing into rear profiles.

CODE

Version

Package

070322207B

S.S.

250

Bracket to weld on with pin and nut

Bracket to weld. Can be used for radial body sides by turning 180째

CODE

Version

Package

070322210B

S.S.

345

Bracket to weld on with pin and nut

Catalogo 2014 eng.indb 86

02/07/2014 10:02:33

BRACKETS FOR REAR DOOR HINGES CODE

Version

Package

070326242

S.S.

390

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270째

CODE

Version

Package

070326343

S.S.

415

Hinges

Flat bracket with pin and nut

Inclined flat bracket with pin and nut

Used with radial body sides or for moving the fastening holes inward.

Catalogo 2014 eng.indb 87

02/07/2014 10:02:34

REAR DOOR HINGES CODE

Version

Package

070120783

S.S.

865

CODE

Version

Package

070326243

S.S.

360

Hinges

Rear door hinge MEDIUM

Flat bracket with pin and nut

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270째.

CODE

Version

Package

070326251

S.S.

380

Inclined flat bracket with pin and nut

Used with radial body sides or for moving the fastening holes inward.

CODE

Version

Package

070322631A

S.S.

315

Bracket to weld on with pin and nut

Catalogo 2014 eng.indb 88

02/07/2014 10:02:35

REAR DOOR HINGES CODE

Version

Package

070123707A

S.S.

1090

Rear door hinge BIG H= mm. 37,5

CODE

Version

Package

070324866

S.S.

370

Hinges

Large-sized hinge with rotation center hight of 37.5 mm.

S.S. bracket BIG, h=37,5 mm, to weld on Bracket to weld. Can be used for radial body sides by turning 180째.

CODE

Version

Package

070123716

S.S.

860

CODE

Version

Package

070326237

S.S.

370

Rear door hinge MEDIUM, height 37,5 mm

Flat bracket with pin and nut

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270째.

Catalogo 2014 eng.indb 89

02/07/2014 10:02:36

REAR DOOR HINGES CODE

Version

Package

070116966A

S.S.

655

070221827

Z.PL.

663

CODE

Version

Package

070322204B

S.S.

285

Hinges

Hinge

Flat bracket with pin and nut

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270째

CODE

Version

Package

070322215A

S.S.

350

Angular bracket with pin and nut

The angular bracket can be securely fastened, but protrudes laterally by 12 mm.

Catalogo 2014 eng.indb 90

02/07/2014 10:02:37

REAR DOOR HINGES CODE

Version

Package

070122766D

S.S.

1065

Hinge specially designed for recessing into rear profiles, for all types of vans.

CODE

Version

Package

070322208A

S.S.

456

Version

Package

Hinges

Drawn hinge

Flat bracket with pin and nut

CODE 070524525 Black PVC sealing

Catalogo 2014 eng.indb 91

02/07/2014 10:02:38

REAR DOOR HINGES CODE

Version

Package

070116351A

S.S.

1453

070215127B

Z.PL.

1462

Assembled hinge complete with wide bracket

Hinges

Heavy-duty hinge with 5 mm thick plate. Comes mounted complete with bracket to weld, pin and nut. Very suitable for vans in sheet metal or refrigerated vans with rear metal panel.

CODE

Version

Package

070116074A

S.S.

1385

070215462B

Z.PL.

1375

Assembled hinge complete with narrow bracket Heavy-duty hinge with 5 mm thick plate. Comes mounted complete with bracket to weld, pin and nut. Very suitable for vans in sheet metal or refrigerated vans with rear metal panel.

CODE

Version

Package

070122685C

S.S.

1190

Double-jointed hinge, low profile with riveted pins

Catalogo 2014 eng.indb 92

02/07/2014 10:02:39

REAR DOOR HINGES CODE

Version

Package

070115766

S.S.

574

070200400

Z.PL.

580

CODE

Version

Package

070322203A

S.S.

251

070422217A

Z.PL.

257

Hinges

hinge

Flat bracket with pin and nut The flat bracket should be mounted flush to the outside to all hinge to rotate 270째.

CODE

Version

Package

070322977A

S.S.

203

070422690A

Z.PL.

200

Flat bracket to weld on with pin and nut

Catalogo 2014 eng.indb 93

02/07/2014 10:02:39

BRACKETS FOR REAR DOOR HINGES - SPARE PARTS CODE

Version

Package

070514509A

S.S.

CODE

Version

Package

070516283A

S.S.

CODE

Version

Package

070515848

S.S.

CODE

Version

Package

070521111A

S.S.

CODE

Version

Package

070514508A

S.S.

Hinges

Pin 80 mm cuphead

Pin 90 mm cuphead

Pin 115 mm cuphead

Pin 130 mm

Selflocking nut M10 antiscuff

Catalogo 2014 eng.indb 94

02/07/2014 10:02:40

REAR DOOR HINGES - SPARE PARTS CODE

Version

Package

071924546

071924547

071915260

Hinges

Nylon bush, black

CODE

Version

071916973A Nylon bush, black

CODE

Version

Nylon busch RH/LH

Catalogo 2014 eng.indb 95

02/07/2014 10:02:41

RECESSED REAR DOOR HINGES CODE

Version

Package

070122152C

S.S.

1325

Recessed double-jointed hinge with riveted pins

Hinges

Double-jointed hinge with no rear overhang, since fixed part is fully recessed into the body side of the vehicle. Allows the movable part to pass through the seal by partially cutting it. Smooth rotation of the two pins and the absence of play between the

CODE

Version

Package

071923187

S.S.

CODE

Version

Package

070122153A

S.S.

Housing for recessed hinge, fixed part

Housing for recessed hinge, moving part

Catalogo 2014 eng.indb 96

02/07/2014 10:02:41

Hinges

SIDE HINGES

SIDE HINGES Side hinges are normally used on the side doors of vehicles. Side hinges are sold as an assembled kit (FIXED LEAF, PIVOTING LEAF and PIN) under one part number. Typically, they rotate through 180 degrees and ensure limited protrusion beyond the exterior of the vehicle.

Hinges

They come in two different versions: • with raised over-the-seal pivoting leaf • flat version for doors with inner seal PASTORE & LOMBARDI side hinges ensure perfectly smooth rotation thanks to IGLIDUR bushings. The construction of these bushings offers significant advantages: • low friction coeﬃcient • no play between the leaves • self-lubricated • smooth pivoting movement even after long periods of inactivity

OTHER SIDE HINGES The family includes a flush double-knuckle design to make use of the total width of the vehicle.

Use standard care and caution and follow these warnings:

Catalogo 2014 eng.indb 98

•

Determine the number of hinges to be used on each door according to the load capacity of the vehicle under construction.

•

For installation, use screws suitable for the mounting holes and the load capacity of the vehicle.

•

Periodically ensure that fasteners are correctly tightened.

•

Hinges with pin and grease nipple: grease at the time of installation and every two or three months afterwards.

02/07/2014 10:02:44

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070825004A

S.S.

757

070923526A

Z.PL.

746

Hinge with 180째 opening for heavy doors, very strong thanks to the deep ribs. Overleaping of the seal head with projection up to 8 mm. The perfect rotation and the complete absence of slack between fixed and movable part is ensured by IGLIDUR bushes. CODE

Version

Package

070822017A

S.S.

487

Hinges

Side hinge

Hinge with seal bypass,

Hinge with 180째 opening. Passing over of seal head with projection up to 9 mm. The smooth rotation. Of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

CODE

Version

Package

070822015A

S.S.

430

070922016A

Z.PL.

430

Hinge with seal bypass

Hinge with 180째 opening. Passing over of seal head with project i o n u p to 9 m m . The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

Catalogo 2014 eng.indb 99

02/07/2014 10:02:45

100

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070825055A

S.S.

423

Hinge with seal bypass

Hinges

Hinge with 180째 opening. Passing over of seal head with project i o n u p to 3 m m . The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

CODE

Version

Package

070822013A

S.S.

430

070922014A

Z.PL.

428

Flat hinge

Flat hinge with 180째 opening for internal seals.The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

CODE

Version

Package

070810489B

S.S.

230

070910490B

Z.PL.

230

Flat hinge for flaps

Flat hinge with 180째 opening for internal seals.The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

Catalogo 2014 eng.indb 100

02/07/2014 10:02:46

101

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070822750B

S.S.

163

070922751B

Z.PL.

163

Hinge with 180째 opening, with IGLIDUR bushes. Specially used for small doors with external seal.

CODE

Version

Package

070822752B

S.S.

160

070922753B

Z.PL.

160

Hinges

hinge with seal bypass

Flat hinge

Flat hinge with 180째 opening, with IGLIDUR bushes. Specially used for small doors with external seal.

CODE

Version

Package

070823235

S.S.

280

CODE

Version

Package

070820809A

S.S.

150

070920810A

Z.PL.

140

Hinge with countersunk holes

Hinge

Catalogo 2014 eng.indb 101

02/07/2014 10:02:47

102

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070821919A

S.S.

326

070921920A

Z.PL.

322

Flat hinge

Hinges

Flat hinge with 180째C, fixed part with two holes, with IGLIDUR bushes

CODE

Version

Package

070821921A

S.S.

380

070921922A

Z.PL.

367

Flat hinge

Flat hinge with 180째C, fixed part with three holes, with IGLIDUR bushes

CODE

Version

Package

070822043A

S.S.

520

Flat hinge

Flat hinge with 180째C, fixed part with four holes, with IGLIDUR bushes

Catalogo 2014 eng.indb 102

02/07/2014 10:02:48

103

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070900277A

Z.PL.

361

Hinges

Flat hinge, pin with lubricator, fixed part with two holes

CODE

Version

Package

070912686A

Z.PL.

370

Flat hinge, pin with lubricator

Catalogo 2014 eng.indb 103

02/07/2014 10:02:49

104

RECESSED SIDE DOOR HINGES CODE

Version

Package

070822309B

S.S.

1111

Double-jointed recessed hinge

Hinges

Recessed side hinge for isothermal doors with no external projection. The seal is not interrupted because of a slot which allows the hinge to pass through. The smooth rotation of the two pins and the absence of play between the fixed and movable parts is

CODE

Version

Package

070822154B

S.S.

150

Version

Package

210

Housings for recessed hinge

CODE 070823280A Housings for recessed hinge, black plastic

Plastic housings with brass bushes for the finishing of the formed opening.

Catalogo 2014 eng.indb 104

02/07/2014 10:02:50

105

RECESSED SIDE DOOR HINGES CODE

Version

Package

070824999A

S.S.

1070

Recessed side door hinges with riveted pins for isothermal doors with no external projection. The seal is not interrupted because of a slot which allows the hinge to pass through. The smooth rotation of the two pins and the absence of play between the fixed and movable parts is ensured by IGLIDUR bushes.

CODE

Version

Package

070825000A

S.S.

152

Hinges

Double-jointed recessed hinge

Housings for recessed hinge housings to insert into the formed opening

Catalogo 2014 eng.indb 105

02/07/2014 10:02:51

106

Hinges

CONTINUOUS POLIALL HINGES

107

CONTINUOUS POLIALL HINGES The POLIALL HINGES consist of a polyurethane profile enclosed between two lengths of aluminium section. Their typical applications are side and rear doors requiring a continuous hinge with very limited protrusion to prevent the ingress of water and dust. They can be installed using rivets or self- tapping screws.

Use standard care and caution and follow these warnings:

Catalogo 2014 eng.indb 107

•

Select a type of hinge suitable for the door weight and thickness.

•

Fasteners must be the adequate thickness, length and capacity for the load and stress involved in the application.

•

Fatigue and material strength tests at different temperatures available.

•

Periodically ensure that fasteners are properly tightened and check the polyurethane components for wear.

Hinges

The POLIALL hinges can be used on any type of door. However, they are mostly used in fully opening folding side doors and rear hatch doors with under door locking systems.

02/07/2014 10:02:53

108

CONTINUOUS POLIALL HINGES CODE

Version

Package

020823495B

L=2400 mm

3645

020823496B

L=2700 mm

3870

020823497B

L=3000 mm

4050

020823498B

L=3200 mm

4450

020823499B

L=4000 mm

5600

Hinges

Continuous Poliall hinge H=29 mm

Self-colour anodized aluminium and black polyurethan h=29 mm. The relief of the polyurethane profile has to be placed into the slot of the aluminium profiles to obtain a better coupling. Package g.

CODE

Version

020825684

L=2400 mm

2760

020825685

L=2700 mm

3070

020826729

L=3200 mm

3950

020825686

L=4000 mm

4500

Continuous Poliall hinge H=24 mm

Natural anodized aluminium and black polyuretan h=24 mm. ideal for fizing with wide-ead rivets

CODE

Version

Package

020821095

L=3000 mm

4440

Continuous Poliall hinge H=28 mm with opening 270째

Self-colour anodized aluminium and black polyurethan, without fixing holes, h=28 mm.

Catalogo 2014 eng.indb 108

02/07/2014 10:02:55

109

CONTINUOUS HINGES CODE

Version

081317202

Package

4255

Continuous hinge in natural coloured anodized aluminium, 30 x 24 mm,

CODE

Version

081400453A

Hinges

Continuous self-colour anodized aluminium hinge in 4 m. bars without holes

Package

1240

Rubber insert, black, 20 m roll

CODE

Version

Package

020815872

Pin Ø6

1800

020815913

Pin Ø4

1400

S.S.Contiunuous hinges without holes 40X1,5X1980

Ø4-6

40X1,5X1980 PIN Ø 6

CODE

Version

Package

020815873

Pin Ø6

2750

S.S.Continuous hinges withouth holes 60X2X1980 60X2X1980 PIN Ø 6

Catalogo 2014 eng.indb 109

02/07/2014 10:02:56

110

ALUMINIUM HINGES CODE

Version

020801429

Package

150

Package

160

Package

Hinges

Bright aluminum hinge, low supports

CODE

Version

020801435 Hinge in bright aluminum with brass bushings

CODE

Version

020815680 Hinge in black anodized aluminum

CODE 020815681

Version

Hinge in black anodized aluminum

Catalogo 2014 eng.indb 110

02/07/2014 10:02:57

111

OTHER HINGES CODE

Version

030817767

Package

CODE

Version

030825635

Hinges

Plastic hinge, complete with bush and rubber seal

Hinge in polimer Perno/pin/Bolzen Ø3

39,5

8,3

H inge in high impact strength special techno polymer (on polyamide base) in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 220°

38,5

CODE

Version

030825638

Package

Hinge in polimer 59x40,5 H inge in high impact strength special techno polymer (on polyamide base) in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 120°

40,5

7,5

Perno/pin/Bolzen Ø4

CODE

Version

030825643

Package

Hinge in polimer 70x51

19,5

23,5

Catalogo 2014 eng.indb 111

Hinge in special techno polymer hardened with glass fibre, in black colour. Nickelplated carbonitritinghardened stainless steel rotation pin. The rotation stud pin, fully inserted into the hinge body, cannot be extracted. Rotation angle: max 270°

02/07/2014 10:02:58

112

OTHER HINGES CODE

Version

030825646

Package

Hinge techno polimer 27

H inge in high impact strength special techno polymer in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 210°

48,2

72,5

Hinges

20,

CODE

Version

030825637

Package

Hinge in polimer 48x50 H inge in high impact strength special techno polymer (on polyamide base) in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 220°

49,5

Perno/pin/Bolzen Ø4

CODE

Version

030825641

Package

Hinge in polimer 50x50 Perno/pin/Bolzen Ø5

12,5

H inge in high impact strength special techno polymer hardened with glass fibre, in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 270°

CODE

Version

030825642

Package

Hinge in polimer 50x50

Perno/pin/Bolzen Ø5

Catalogo 2014 eng.indb 112

02/07/2014 10:02:59

113

Door retainers

DOOR RETAINERS

114

DOOR RETAINERS Door checks keep the door open when it is resting on the side of the van and come in two basic designs:

Door retainers

• •

Catalogo 2014 eng.indb 114

a two-piece design with a male element mounted on the door and the female element installed to the wall. a one-piece design mounted under the frame.

Use standard care and caution and follow these warnings: •

Door checks are designed to keep the doors open when the vehicle is stopped and parked on level ground.

•

Never move the vehicles with the doors open.

•

For under chassis version, ensure that the arm is into the stop hole when stopped, and when closing follow the arm by keeping it firmly through its handgrip.

•

For two-piece design, ensure that the male part is firmly engaged into the female slot.

02/07/2014 10:03:02

115

UNDER CHASSIS DOOR RETAINERS CODE

Version

072327266

Package

1850

Door retainers

Covered under chassis door retainer in anodized aluminium arm in s.s.handle in rubber EPDM

CODE

Version

Package

072325051

S.S.

157

Kit s.s. fixing brackets for covered under chassis door retainer including 2 brckets 4 screws 4 washers

Catalogo 2014 eng.indb 115

02/07/2014 10:03:03

116

UNDER CHASSIS DOOR RETAINERS CODE

Version

Package

072325816

S.S.

1810

072325817

Z.PL.

1936

CODE

Version

Package

072325821

S.S.

1810

CODE

Version

Package

072325818

Z.PL.

2010

Door retainers

Door retainer

Door retainer with s.s. spring

Door retainer with bezinal protected spring

Catalogo 2014 eng.indb 116

02/07/2014 10:03:04

117

LATERAL DOOR RETAINERS CODE

Version

Package

072320382

L=103 mm

120

072320381

L=123 mm

123

072323683

L=143 mm

130

CODE

Version

Package

072320865

S.S.

Door retainers

Complete door retainer, male part in polyurethane

Plate for female part of door retainer Plate for female part of door holder The plaquĂ¨s central hole is required for customs control

CODE

Version

Package

072324765

S.S.

S.S. plate for polyurethan door retainer

Catalogo 2014 eng.indb 117

02/07/2014 10:03:04

118

LATERAL DOOR RETAINERS CODE

Version

Package

072310944

S.S.

072310946

Z.PL.

Door retainers

Door retainer, male part 104 mm Male part of door stay with return spring

CODE

Version

Package

072310945

S.S.

072310947

Z.PL.

Door retainer, male part 122 mm Male part of door stay with return spring

CODE

Version

Package

072322748

S.S.

072322749

Z.PL.

Version

Package

Door retainer, female part

CODE 072312524 Black PVC protection plate for door retainer male part

CODE

Version

072312525 Black PVC protection plate for door retainer female part

The central hole is required for customs control

Catalogo 2014 eng.indb 118

02/07/2014 10:03:06

119

LATERAL DOOR RETAINERS CODE

Version

Package

072301449

S.S.

195

Door retainer with automatic close: to use, raise the lever of the male part which will automatically be inserted into the female part upon the contact of the two parts. CODE

Version

Package

072319804

S.S.

114

CODE

Version

Package

072326695

S.S.

Door retainers

Automatic door retainer

Automatic door retainer, male part

Automatic door retainer, female part

Catalogo 2014 eng.indb 119

02/07/2014 10:03:06

120

Door retainers

LATERAL DOOR RETAINERS CODE

Version

Package

072301288

L=30 mm

072301292

L=40 mm

072301290

L=50 mm

072301291

L=60 mm

072301289

L=80 mm

Version

Package

Nickel-plated brass pin

CODE 072301296 Shiny aluminum seal holder

CODE 072301295A

Version

Rubber female part

Catalogo 2014 eng.indb 120

02/07/2014 10:03:07

121

LATERAL DOOR RETAINERS CODE

Version

072301333

Package

CODE

Version

072301332 Shiny aluminum seal holder

CODE

Version

072301331A

Door retainers

Nickel-plated brass pin 16 mm

Rubber female part

CODE

Version

072301080 Complete rubber door retainer with plastic pin

CODE 072312898

Version

Complete white nylon door retainer

Catalogo 2014 eng.indb 121

02/07/2014 10:03:08

Interior system for truks 122

MEAT TRANSPORT

123

Meat transportation systems are made up of a set of components for hanging and handling meat inside isolated vans. There are two different systems: - guide rails and hook with nylon washer - tubular rails and Euro-hook In both systems, components are anchored to the roof and suitable provisions must be made to ensure the roof will withstand the load. For the guide rail system, the aluminium curve determines the distance between two rails. For the tubolar rail system, vehicle width must be divided into equal sections depending on the number of tubular rails to be installed.

Use standard care and caution and follow these warnings:

Interior system for truks

MEAT TRANSPORT

When dimensioning a meat transportation system, all vehicle-related variables should be taken into account: frame torsion, insulated body torsion, roof load capacity, type of cargo and transport conditions, running conditions. It is the vehicle’s manufacturer who should select the components, their number, mounting configuration and fastening systems based on vehicle design specifications. At customer’s request, Pastore & Lombardi can test the application after prior feasibility evaluation. ARTICULATED HOOKS •

only center line per hook is allowed

BRACKETS • •

alternate a pair of brackets with chains with a pair of brackets without chain when using the means, remember to connect chains for even load distribution. failure to connect all chains will lead to load mass-ups against the connected chains, which might break or cause loosening of bracket fasteners.

RAILS • trim rails at connection points to avoid wear to hook washers. • ubricate rails with products authorized by Veterinary Medicine Body for improved sliding properties. ALUMINIUM TUBE WITH EURO-HOOKS • always install support hook stop for load distribution. • ailure to install hook stops will lead to load mass-ups against the installed stops, which might break or cause loosening of bracket fasteners. • lubricate tubes with products authorized by Veterinary Medicine Body for improved sliding properties.

Catalogo 2014 eng.indb 123

02/07/2014 10:03:12

124

MEAT TRANSPORT RAIL SYSTEM CODE

Version

Package

072520741B

S.S.

402

Interior system for truks

Articulated meat hook conforms to DIN 5047

CODE

Version

Package

072520702C

S.S.

230

Meat hook conforms to DIN 5047

Catalogo 2014 eng.indb 124

02/07/2014 10:03:12

125

MEAT TRANSPORT RAIL SYSTEM CODE

Version

Package

072520416B

S.S.

361

CODE

Version

Package

072519001B

S.S.

270

Version

Package

670

Interior system for truks

Set of 2 rack fixing brackets with chain for hook stop

Set of 2 rack fixing brackets withouth chain

CODE 072515902. Shiny aluminium bend r=48

CODE

Version

Package

072515899

L=6000 mm

13250

072519456

L=7000 mm

15560

Anodized aluminum guide rack

Catalogo 2014 eng.indb 125

02/07/2014 10:03:13

126

MEAT TRANSPORT TUBOLAR SYSTEM CODE

Version

Package

072518972

S.S.

1350

EUROHOOK, conforms to DIN 5047

CODE

Version

072622298

Package

1295

Package

16000

Package

375

Anodized aluminum tube support with stainless steel hook stop with pin Ø11

153 85

105

Interior system for truks

Hook in stainless steel 316, support in zinc-plated steel

Ø8,5 50

CODE

Version

072621709 Anodized aluminium tube, 7 m

CODE 072621710

Version

Raw aluminum insert mm. 200

Unfinished aluminum tube for tube rack jointing.The jointing of two tube racks should be carried out in correspondence with a tube support.

Catalogo 2014 eng.indb 126

02/07/2014 10:03:14

127

MEAT TRANSPORT TUBOLAR SYSTEM CODE

Version

072621706

Package

760

Package

610

Package

290

CODE

Version

072621733

Interior system for truks

Anodized aluminum rear cap with slipaway stainless steel pin

Anodized aluminum rear cap with fixed stainless steel pin

CODE

Version

072621711 Anodized aluminum front cap

Ø54

Ø38

Catalogo 2014 eng.indb 127

M10

Ø80

Ø49

02/07/2014 10:03:15

128

MEAT TRANSPORT TUBOLAR SYSTEM CODE

Version

072622299

Package

11500

Interior system for truks

Hook stop profile in anodized aluminium, 7 m 0726 22299

Anodized aluminum hook stop profile. To recess under support to prevent the loaded hook from slipping out. CODE

Version

072626131

Package

942

Hook stop profile in anodized aluminium, 1 m Anodized aluminum profile to be fitted under brackets to avoid unloaded hooks slipping out. The profile is mounted where unused hooks are deposited.

CODE

Version

072622158B

Package

5200

Winch with handle for tube guide system

The winch stretches a cable, where the unused hooks are deposited.

CODE 072622420

Version

Package

1240

Spare handle for winch

Catalogo 2014 eng.indb 128

02/07/2014 10:03:16

129

SIDE WALL MEAT TRANSPORTATION CODE

Version

Package

071919206A

S.S.

370

Hook unit support to mount onto side walls of meat transport vans for hanging light loads or depositing unused hooks.

CODE

Version

Package

071921058

S.S.

4458

071911463

Z.PL.

4450

Version

Package

Interior system for truks

Tube support for side walls

STEEL TUBE, 3000X27X2,5 MM

CODE 071920120 PVC end cap

Cap for sealing the ends of the tube.

Catalogo 2014 eng.indb 129

02/07/2014 10:03:17

130

Interior system for truks

SECOND MOBILE PLATFORM

154

Catalogo 2014 eng.indb 130

02/07/2014 10:03:18

131

Use standard care and caution and follow these warnings: •

While realizing the side wall suitable reinforcements in the area under the side rails must be provided to withstand expected load.

•

After loading the cargo, insert the spring catches into the stop bushes.

•

Never exceed rated load capacity. please note that load capacity calculation applies to the vehicle at standstill and does not provide for varying conditions when the vehicle is in motion (speed, braking, road surface conditions) and the resulting variations in load capacity. it is the outfitter’s responsibility to take such considerations into account.

•

The beam storage area shall be realized using the special angle bars to prevent the beams from slipping off during movement.

•

In case of non-use of the 2nd moving platform it is possible to build a parking place for housing the unused bars using the same aluminium profiles. In this way you will have the inner room free, and the bars will remain on their beams. The angular item 0355 22899 must be assembled in the corners of the profile in order to avoid the outlet of the wheels out of the beams if put in parking position.

Interior system for truks

SECOND MOBILE PLATFORM

2533 100 corsa max max travel max hub

Catalogo 2014 eng.indb 131

035521086A

parte mobile moving part beweglicher teil

parte fissa fixed part fester teil

035522316A 035521436A

02/07/2014 10:03:20

132

SECOND MOBILE PLATFORM CODE

Version

035521086A

Package

21100

Package

13700

Package

300

Interior system for truks

Side profile in aluminium l=6800 mm

CODE

Version

035522316A Aluminium bar with wheels l= 2410 mm

CODE

Version

035523377 Nylon wheel with 2 bearings

CODE

Version

Package

035521436A

S.S.

Version

Package

Stop bush

CODE 035522899

Angular anodized aluminium profile for avoiding the outlet of the wheels

Catalogo 2014 eng.indb 132

02/07/2014 10:03:21

Interior system for truks

133

INNER MOVABLE WALL

134

Interior system for truks

INNER MOVABLE WALL

Catalogo 2014 eng.indb 134

- Locking and sliding of the lifting arm guaranteed with one cam and one single pin. - Automatic lock with vertical wall - Automatic lock with horizontal wall - Free sliding with wall inclination between 30°an d 60° - Easier mounting of rail and rack because the lifting arms are supplied without gas springs - Possibility to choose the gas springs between 100-150-200-250 kg power - Quick and easy mounting and replacing of the gas springs - Possibility to choose between MANUAL and AUTOMATIC anchor system with lifted wall - Material: pickled and passivated stainless steel AISI 304

Use standard care and caution and follow these warnings: •

To be fitted with gas springs of only one power value.

•

Always mount additional blocking systems (lateral or centred type) to be used with wall in vertical position.

•

Install a suitable setscrew onto the rails to avoid sliding out of supports.

•

With the panel in horizontal position , ensure that the brake trolley is in a proper position to support the wall.

02/07/2014 10:03:25

135

LIFTING ARMS SYSTEM WITH RAIL AND RACK CODE

Version

Package

072424591G

S.S.

11800

94 114 134

168

526

559

CODE

Version

Package

072425893D

S.S.

16000

Interior system for truks

152

124

Pair stainless steel lifting arms

152

124

Pair stainless steel lifting arms

Ø1

526

168

94 114 134

559

CODE

Version

Package

072426611

S.S.

363

set of S.S. sets for release inner wall in upright position

Catalogo 2014 eng.indb 135

02/07/2014 10:03:26

136

Interior system for truks

LIFTING ARMS SYSTEM WITH RAIL AND RACK CODE

Version

Package

085025188A

Kg 100

640

082524323A

Kg 150

640

082523999B

Kg 200

640

082526278A

Kg 250

650

Version

Package

250

Gas springs

CODE 072426802 Kit gas spring end piece

CODE

Version

Package

072426727

L=4000 mm

9220

072423281

L=7000 mm

16150

CODE

Version

Package

072423282B

S.S.

1750

Anodyzed Aluminium rail

S.S. rack AISI 304 - Bars to m. 3,50

Catalogo 2014 eng.indb 136

02/07/2014 10:03:26

137

LIFTING ARMS SYSTEM WITH RAIL AND RACK CODE

Version

072424602C

Package

1020

Interior system for truks

Keeper bar

CODE

Version

Package

072424601C

S.S.

570

CODE

Version

Package

072424176G

S.S.

1900

CODE

Version

Package

072424559A

S.S.

CODE

Version

Package

072421585D

L=2800 mm

2005

S.S. plate with zinc plated latch

Stainless steel AISI 304 brake trolley

Keeper

PVC profile for inner wall, grey

Catalogo 2014 eng.indb 137

02/07/2014 10:03:27

138

LIFTERS FOR INNER WALL CODE

Version

Package

072426552B

S.S.

4000

CODE

Version

Package

072426551A

S.S.

3800

Version

Package

3000

Interior system for truks

Kit of wall blocking device in vertical position

CODE 035519332 Cargo restraint profile in anodized aluminum,

length 3 m.

CODE

Version

Package

072425674B

S.S.

1030

Side blocking device for inside wall

Catalogo 2014 eng.indb 138

02/07/2014 10:03:29

139

LIFTERS FOR INNER WALL CODE

Version

Package

072426569B

S.S.

13360

Interior system for truks

Lifter arm low profile with automatic blocking device

PARATIA INNER WALL TRENNWAND

125

PARATIA INNER WALL TRENNWAND

110

573

Ø1

120 156

543

CODE

Version

Package

072426570B

S.S.

15740

Lifter arm with recessed rail, automatic blocking device

PARATIA INNER WALL TRENNWAND

125

Ø1

543

Catalogo 2014 eng.indb 139

150

PARATIA INNER WALL TRENNWAND

110

573

120 156

02/07/2014 10:03:29

140

Interior system for truks

LIFTERS FOR INNER WALL CODE

Version

Package

085025188A

Kg 100

640

082524323A

Kg 150

640

082523999B

Kg 200

640

082526278A

Kg 250

650

Version

Package

250

Gas springs

CODE 072426802 Kit gas spring end piece

CODE

Version

Package

072515899

L=6000 mm

13250

072519456

L=7000 mm

15560

Anodized aluminum guide rack

Catalogo 2014 eng.indb 140

02/07/2014 10:03:30

141

LIFTERS FOR INNER WALL CODE

Version

Package

072424601C

S.S.

570

Version

Package

1140

Package

1300

CODE 072426571 Keeper bar

CODE

Version

072426572

Interior system for truks

S.S. plate with zinc plated latch

Keeper bar

CODE

Version

Package

072421585D

L=2800 mm

2005

PVC profile for inner wall, grey

Catalogo 2014 eng.indb 141

02/07/2014 10:03:31

142

LIFTERS FOR INNER WALL CODE

Version

Package

072426552B

S.S.

4000

CODE

Version

Package

072426551A

S.S.

3800

Version

Package

3000

Interior system for truks

Kit of wall blocking device in vertical position

CODE 035519332 Cargo restraint profile in anodized aluminum,

length 3 m.

CODE

Version

Package

072425674B

S.S.

1030

Side blocking device for inside wall

Catalogo 2014 eng.indb 142

02/07/2014 10:03:33

143

LIFTER ARMS FOR LIGHT LIFTING WALL CODE

Version

Package

072425624C

S.S.

960

FITTING WITH MEAT TRANSPORT RAIL SYSTEM

CODE

Version

Package

072426661

S.S.

630

CODE

Version

Package

072424559A

S.S.

CODE

Version

Package

072425674B

S.S.

1030

CODE

Version

Package

072515899

L=6000 mm

13250

072519456

L=7000 mm

15560

S.S. manual blocking trolley for inner wall

Interior system for truks

Set of S.S. brackets for light lifting wall

Keeper

Side blocking device for inside wall

Anodized aluminum guide rack

Catalogo 2014 eng.indb 143

02/07/2014 10:03:34

144

CARGO RESTRAINT SYSTEMS CODE

Version

035519332

Package

3000

Interior system for truks

Cargo restraint profile in anodized aluminum, length 3 m.

CODE

Version

Package

035517576

Z.PL.

2900

CODE

Version

Package

035521236A

Z.PL.

6500

Package

100

Cargo restraint profile in zinc-plated steel, length 3 m.

Horizontal grooved profile in white zinc-plated steel, length 3,06 m.

CODE 035520031A

Version

Black plastic endpiece

Catalogo 2014 eng.indb 144

02/07/2014 10:03:35

145

CODE

Version

Package

035521469

Z.PL.

4600

Vertical cargo restraint bar in zinc-plated steel for loading platforms, through pin, welded externally, length 2 m.

CODE

Version

Package

035525393

Z.PL.

7530

CODE

Version

Package

035526389

Z.PL.

8150

Interior system for truks

CARGO RESTRAINT SYSTEMS

Round cargo m. 1,89-3,00

Round cargo restraint bar in z.pl. steel, from 2085 mm to 2485 mm with pin Ă&#x2DC; 24

Catalogo 2014 eng.indb 145

02/07/2014 10:03:36

146

CLOTHING TRANSPORT SYSTEM CODE

Version

Interior system for truks

035515800A

Package

5200

Package

180

Clothing rack profile in zinc-plated steel, length 3 m., with drawn hole

CODE 035516148

Version

set heads and 2 pins

Catalogo 2014 eng.indb 146

02/07/2014 10:03:36

147

Interior system for truks

SYSTEM FOR SLIDING DOOR

•

System realized with a telescopic guide, with hardened tracks and steel balls for bearings

•

High reliability of the sliding system in the long term

•

Reduced dimensions inside the vehicle

•

Quick assembly and easy use

•

The dimensions are based on a door 900 mm wide, with maximum thickness 85 mm, maximum weight 100 kg

•

Designed for doors sliding from the right to the left and from the left to the right

Catalogo 2014 eng.indb 147

02/07/2014 10:03:38

148

SYSTEM FOR SLIDING DOOR CODE 072426618A

Version

Package

13600

Interior system for truks

Set slidin door

Catalogo 2014 eng.indb 148

02/07/2014 10:03:38

149

Ventilation

150

ELECTRIC AERATORS 12-24 V CE CODE

Version

Package

083426156A

12V

5800

083426157A

24V

5800

Version

Package

1536

Package

745

Ventilation

Complete aerator black - CE

CODE 083426154 External air intake in black cataphoresis

CODE 083426155

Version

Support for external air intake in black cataphoresis

Catalogo 2014 eng.indb 150

02/07/2014 10:03:40

151

SPARE PARTS FOR ELECTRIC AERATORS 12-24 V CODE

Version

083402509A

Package

345

Package

Ventilation

Connection ring, black cataphoresis

CODE

Version

083400475 Air filter

CODE

Version

Package

083426662A

12V

2290

083426663A

24V

2290

Engine unit complete with filter

Catalogo 2014 eng.indb 151

02/07/2014 10:03:41

152

SPARE PARTS FOR ELECTRIC AERATORS 12-24 V CODE

Version

083423367

Package

133

Package

Ventilation

Protection plate, black aluminium

CODE

Version

083400476 Rotation reverser

CODE 083400478

Version

3 speeds switch

Catalogo 2014 eng.indb 152

02/07/2014 10:03:41

153

VENTILATION HATCHES FOR ISOTHERMAL VEHICLES CODE

Version

071020152C

Package

2115

Ve n t i l a t i o n h a t c h 110x335x55 mm, white painted, with s.s. lateral external handle and 2 s.s. hinges, without latch. To complete the ventilation hatch, remember to order latch

CODE

Version

071021923B

Package

1955

Ventilation

Ventilation hatch mm 110x335x55

Ventilation hatch mm 110x335x75 Hatch 110x335x75 mm, white painted with s.s. external handle and s.s. hinge, without latch. To complete the ventilation hatch, remember to order latch

CODE 071019198C

Version

Package

2500

Ventilation hatch mm 170x335x75 Ve n t i l a t i o n h a t c h 170x335x75 mm, white painted, with s.s. external handle and 2 s.s. hinges, without latch. To complete the ventilation hatch, remember to order latch

Catalogo 2014 eng.indb 153

02/07/2014 10:03:42

154

VENTILATION HATCHES FOR ISOTHERMAL VEHICLES CODE

Version

071020355A

Package

Ventilation

Black plastic latch for external handle

CODE 071921805

Version

Spring catch nickel-plated for pins Ă&#x2DC; 12

Catalogo 2014 eng.indb 154

02/07/2014 10:03:42

155

VENTILATION HATCHES FOR ISOTHERMAL VEHICLES - SPARES CODE

Version

072021545B

Package

330

Package

380

Pressed rubber seal for ventilation hatch 110x335 mm

CODE

Version

072021544B

Ventilation

110

335

Pressed rubber seal for ventilation hatch 170x335 mm

170

335

CODE

Version

Package

030520752

S.S.

360

External handle for ventilation hatch with covered handle Stainless steel handle suitable for ventilation doors with external seal.

CODE

Version

Package

070822750B

S.S.

163

070922751B

Z.PL.

163

hinge with seal bypass

Hinge with 180째 opening, with IGLIDUR bushes. Specially used for small doors with external seal.

Catalogo 2014 eng.indb 155

02/07/2014 10:03:43

156

AERATION GRILLS CODE

Version

Package

071019290

S.S.

3100

CODE

Version

Package

083425942A

S.S.

Ventilation

Aeration grill

1150

S.S. grill with adjustment knob

CODE

Version

071020935A

Package

360

Aeration grill, raw aluminium 190x440 mm - slots 50x8 mm

CODE 071021893

Version

Package

495

Aeration grill, raw aluminium 260x440 mm - slots 50x8 mm

Catalogo 2014 eng.indb 156

02/07/2014 10:03:44

157

FILLER FLAPS CODE

Version

Package

024123667A

S.S.

524

024117267C

Z.PL.

630

Ventilation

Pre-galvanized steel sheet filler flap with S.S. spring, without key, rounded frame corners, 245x190 mm

CODE

Version

Package

024121322C

Z.PL.

960

Pre-galvanized steel sheet filler flap with S.S. spring, without key, rounded frame corners, 296x258 mm

CODE

Version

Package

024120253E

Z.PL.

665

Pre-galvanized steel sheet filler flap with S.S. spring, with key, rounded frame corners, 245x190 mm

Catalogo 2014 eng.indb 157

02/07/2014 10:03:45

158

FILLER FLAPS CODE

Version

082821607A

Package

500

Ventilation

Spare buffer for filler flap

CODE

Version

Package

071926209

S.S.

Version

Package

Spare tongue

CODE 071926175 Spare key barrel

Catalogo 2014 eng.indb 158

02/07/2014 10:03:46

159

HANDLES FOR WINDOWS CODE

Version

Package

037317551

285

037317552

285

Version

Package

100

CODE 026712012

Ventilation

Push-button swivel window lock , black

Complete window hammer

Catalogo 2014 eng.indb 159

02/07/2014 10:03:47

160

Lights

CEILING LIGHTS

161

CEILING LIGHTS Roof lights are used for the interior lighting of vehicles and come in recessed or surface-mounted configurations.

Use standard care and caution and follow these warnings:

Catalogo 2014 eng.indb 161

•

Use type-approved cables with adequate cross-section area.

•

Ensure that roof light rating matches the realized system.

•

For all types of lights: never use bulbs exceeding the rating indicated on the item, as they would generate a greater amount of heat which might damage lens, connections or the whole system.

Lights

Ideal for insulated vans, as they withstand normal wash-down duty without damage to internal wiring connections.

02/07/2014 10:03:50

162

CEILING LIGHTS CODE

Version

Package

038627012A

12V

300

038627013A

12V

300

038627014A

24V

300

038627015A

24V

300

CODE

Version

Package

038627149

12V

450

038627148

24V

450

CODE

Version

Package

038617455A

12V

630

038615900A

24V

635

Lights

Recessed ceiling light

Recessed - 6 LED

Recessed ceiling light - 300x100x38 mm Recessed plastic ceiling light with 3x15 W - torpedo bulbs.

Catalogo 2014 eng.indb 162

02/07/2014 10:03:51

163

CEILING LIGHTS - SPARE PARTS CODE

Version

038624184

Package

Lights

Screen for ceiling light

CODE

Version

Package

038626957

12V

038626958

24V

Version

Package

Globe-bulb 21W

CODE 038620088 Torpedo bulb 15 W - 24 V

Never replace the issued 15 W bulbs with other ones of higher capacity!

CODE 038625438

Version

Package

Black screw for ceiling lights

Catalogo 2014 eng.indb 163

02/07/2014 10:03:51

164

Under-chassis components

165

CODE

Version

Package

035625978

S.S.

5880

Decorated S.S.AISI box - 18,5 litre-tap with outlet Ø 1 1/4 300

250

0 25

CODE

Version

Package

035625979

S.S.

9800

Decorated S.S.AISI box - 35 litre-tap with outlet Ø 1 1/4 400

30 300

Under-chassis components

DRAINING BOXES

CODE

Version

Package

035125998

S.S.

4031

Version

Package

960

Water tank in textured stainless steel Capacity 25

CODE 035623535 GRP box with tap, inner Ø outlet 23,5 mm 395

100

Catalogo 2014 eng.indb 165

02/07/2014 10:03:54

166

ROPE HOOKS CODE

Version

Under-chassis components

035317541

Package

100

Package

100

106

Package

200

Lightweight pressed steel rope hook

CODE

Version

035318534 Heavy pressed steel rope hook

CODE 035410999A

Version

Aluminium hook for tarpaulin

Catalogo 2014 eng.indb 166

02/07/2014 10:03:54

167

CODE

Version

Package

035225309

450x1065

2500

035225310

610x915

3500

035225760

450x915

2500

035225761

610x915

3000

Individual splashguard without brackets and screws. With trademark Clear Pass

450-610

Splash guards Clear Pass are produced according to norms ISO/ TS 16949:2002 for quality assurance and to European regulations 91/226/CEE. Omologation number A e6 2020.

915-1065

Catalogo 2014 eng.indb 167

Under-chassis components

"CLEAR PASS" MUDFLAPS WITH ANTI SPRAY

02/07/2014 10:03:54

168

MUDGUARDS CODE

Version

Under-chassis components

033721187

Package

4950

Package

3700

Package

3300

Package

3100

Black plastic 670X1340 mudguard polyethylene with white edge

CODE

Version

033721190 Black plastic 595X1100 mudguard polyethylene with white edge

CODE

Version

033721191 Black plastic 550X1100 mudguard polyethylene with white edge

CODE

Version

033721192 Black plastic 500X1000 mudguard polyethylene with white edge

Catalogo 2014 eng.indb 168

02/07/2014 10:03:55

169

CODE

Version

033721193

Package

3500

Package

2740

Package

1100

Package

3000

Black plastic 430X650 mudguard polyethylene with white edge

CODE

Version

033721194 Black plastic 450X840 mudguard polyethylene with white edge

CODE

Version

033721195

Under-chassis components

MUDGUARDS

Black plastic 240X840 mudguard polyethylene with white edge

CODE

Version

033721481 Black plastic 430X1300 mudguard polyethylene with white edge

Catalogo 2014 eng.indb 169

02/07/2014 10:03:57

170

Under-chassis components

LADDERS AND STEPS CODE

Version

Package

034722710B

Z.PL.

14300

CODE

Version

Package

034711231A

Z.PL.

1200

CODE

Version

Package

034711232A

Z.PL.

1550

CODE

Version

Package

034722281

7 MICRON

1210

035023318

15 MICRON

1210

EUROTRUCK folding ladder hot galvanized

Z.pl. step H= 250 mm

Z.pl. step H= 360 mm

Zinc plated steel step standards VBG 12

Catalogo 2014 eng.indb 170

02/07/2014 10:03:58

171

CODE

Version

Package

035315991B

Z.PL.

939

Casted steel fixing bracket

Heavy body clamp, thickness 12 mm.

CODE

Version

Package

035316080

Z.PL.

Z.pl. shim 2 mm Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035318985A

Z.PL.

116

Under-chassis components

BOX FIXING BRACKETS

Z.pl. shim 4 mm Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035320686B

Z.PL.

658

Casted steel fixing bracket

Catalogo 2014 eng.indb 171

02/07/2014 10:03:59

172

Under-chassis components

BOX FIXING BRACKETS CODE

Version

Package

035321301B

Z.PL.

641

Casted steel fixing bracket

Light clamp for body fixing, thickness 12 mm.

CODE

Version

Package

035321513A

Z.PL.

Shim 2 mm for support 035321301B Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035323020A

Z.PL.

100

Shim mm. 4 per art 035321301B Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035325270

Z.PL.

600

Fixing bracket

Catalogo 2014 eng.indb 172

02/07/2014 10:04:00

173

CODE

Version

035314494B

Package

282

Body mounting bracket S 235 J2 EN 10025 (Fe 360 B)

CODE

Version

035319522B

Package

435

Body mounting bracket, thickness 6 mm S 235 J2 EN 10025 (Fe 360 B)

CODE

Version

035302484B

Package

370

Under-chassis components

BODY MOUNTING BRACKETS

Big body mounting bracket S 355 MC EN 10149 (Fe E 355)

CODE 035315473B

Version

Package

530

Body mounting bracket S 355 MC EN 10149 (Fe E 355)

Catalogo 2014 eng.indb 173

02/07/2014 10:04:01

174

Rubber and aluminium profiles

175

CODE 081607547B

Version L=50000mm

Package

6990

Joint cover guisnap, black, with metal insert for max. 4 mm thickness

CODE 081613369

Version L=25000mm

Package

5400

Guisnap 16 mm pipe

Rubber and aluminium profiles

GUISNAP

for max. 5 mm thickness

CODE 081614121C

Version L=25000mm

Package

3725

Guisnap, tubolar part 11 mm for max. 3 mm thickness

Catalogo 2014 eng.indb 175

02/07/2014 10:04:04

176

Rubber and aluminium profiles

GUISNAP CODE 081621989C

Version L=50000mm

Package

9080

Guisnap, tubolar part 15 mm for max. 4 mm thickness

CODE 081621990C

Version L=50000mm

Package

10600

Guisnap with tongue, tubolar part 14 mm for max. 3 mm thickness

CODE 081621992C

Version L=50000mm

Package

14400

Guisnap, tubolar part 18 mm for max. 3 mm thickness

Catalogo 2014 eng.indb 176

02/07/2014 10:04:05

177

CODE

Version

Package

072027358

L=2700 mm

1250

CODE

Version

Package

072027219

L=2700 mm

1200

072027220

L=3000 mm

1200

CODE

Version

Package

072022021B

L=2700 mm

1300

Dual hardness PVC seal, 27 mm, grey

PVC profile, grey, 30 mm

Rubber and aluminium profiles

DUAL HARDNESS PVC SEALS

PVC profile grey 35 mm

Catalogo 2014 eng.indb 177

02/07/2014 10:04:06

178

CODE

Version

Package

072021424D

L=2700 mm

1300

CODE

Version

Package

072025591

L=3000 mm

1650

CODE

Version

Package

072421585D

L=2800 mm

2005

PVC profile, grey mm.40.5

Rubber and aluminium profiles

DUAL HARDNESS PVC SEALS

40.5

PVC profile, grey mm.44

PVC profile for inner wall, grey

Catalogo 2014 eng.indb 178

02/07/2014 10:04:06

179

CODE

Version

Package

072021425C

L=2700 mm

1700

CODE

Version

Package

072021426C

L=2700 mm

2050

CODE

Version

Package

072021451

BLACK

072022343

GREY

PVC profile, grey, mm.55

PVC profile, grey, 85 mm

Rubber and aluminium profiles

DUAL HARDNESS PVC SEALS

PVC joint for angular connections on dual hardness profiles

Catalogo 2014 eng.indb 179

02/07/2014 10:04:07

180

Rubber and aluminium profiles

RUBBER PROFILES AND OTHER PROFILES CODE

Version

Package

081409327A

L=2400 mm

620

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

Package

081217079A

Z.PL.

600

Version

Package

2180

Zinc-plated profile, for art. 081409327A- bars2,5 m

CODE 081409292A

L=25000mm

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 081409387A

Version L=25000mm

Package

16000

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 081414337C

Version L=50000mm

Package

6100

EPDM rubber profile, 9x14 mm TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

Catalogo 2014 eng.indb 180

02/07/2014 10:04:09

181

CODE 081409470A

Version L=25000mm

Package

6565

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 081409533B

Version L=25000mm

Package

11100

EPDM rubber profile

Rubber and aluminium profiles

WINDOW SEALS

TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 081409471A

Version L=20000mm

Package

780

Rubber tightener

Catalogo 2014 eng.indb 181

02/07/2014 10:04:10

182

Rubber and aluminium profiles

WINDOW SEALS CODE 081409503C

Version L=25000mm

Package

9000

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 081409504B

Version L=50000mm

Package

2500

Package

6000

Rubber tightener

CODE 081409550A

Version L=25000mm

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 081409405

Version L=25000mm

Package

17500

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

Catalogo 2014 eng.indb 182

02/07/2014 10:04:11

183

CODE 072014003A

Version L=20000mm

Package

11100

Rubber profile, 1 tongue TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Package

072009462B

L=10000mm

Version

7000

072016554B

L=2500 mm

1500

072016746B

L=4200 mm

2827

Rubber profile, 2 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 072020670

Version L=10000mm

Package

4800

Rubber and aluminium profiles

DOOR SEALS

Rubber profile, 3 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Package

072010310B

L=10000mm

Version

9400

072016555C

L=2800 mm

2700

Rubber profile, 4 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

Catalogo 2014 eng.indb 183

02/07/2014 10:04:11

184

Rubber and aluminium profiles

DOOR SEALS CODE 072022617B

Version L=13000mm

Package

10000

Rubber profiles TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 072020669

Version L=13000mm

Package

8500

Rubber profile, 4 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 072022618B

Version L=13000mm

Package

11400

Rubber profile, 4 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE 072023872

Version L=13000mm

Package

7550

Rubber profile, 3 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

Catalogo 2014 eng.indb 184

02/07/2014 10:04:12

185

CODE

Version

Package

081315898

L=6150 mm

440

CODE

Version

Package

081319219

L=6000 mm

320

Seal fastening profile

Seal fastening profile in aluminium distance between hole centres 130 mm.

Catalogo 2014 eng.indb 185

Rubber and aluminium profiles

DOOR SEALS

02/07/2014 10:04:12

186

Rubber and aluminium profiles

BUFFERS CODE

Version

082815877

Package

360

Black plastic end cap

CODE

Version

082813790A Black rubber buffer, thickness 7 mm. side protection for refrigerated vans.

CODE

Version

Package

072821682

S.S.

400

S.S. plate glazed , side protection for refrigerated vans.

Catalogo 2014 eng.indb 186

02/07/2014 10:04:13

187

CODE

Version

082802491A

Package

100

Package

100

Package

100

Package

100

Buffer PVC

CODE

Version

082802490 Buffer PVC

CODE

Version

082807888A

Rubber and aluminium profiles

BUFFERS

Buffer PVC

CODE 082807954

Version

Buffer Ă&#x2DC; 50x62x40 mm

Catalogo 2014 eng.indb 187

02/07/2014 10:04:14

188

Rubber and aluminium profiles

BUFFERS CODE

Version

082807885

Package

100

Package

1200

Buffer 50x30x38 mm

CODE

Version

082808003 Buffer 50x30x38 mm

CODE

Version

082807975 Buffer 60x42x48 mm

CODE 082819535C

Version

Buffer 195xx80x80 mm

Catalogo 2014 eng.indb 188

02/07/2014 10:04:15

189

BUFFERS Version

082820215A

Package

780

Package

560

Package

1722

Package

3540

Rubber and aluminium profiles

CODE Buffer 200x52x80 mm

CODE

Version

082819534C Buffer 210x50x55 mm

CODE

Version

082819536C Buffer 240x80x90 mm

CODE 082819537C

Version

Buffer 340x100x105 mm

Catalogo 2014 eng.indb 189

02/07/2014 10:04:17

190

Rubber and aluminium profiles

BUFFERS CODE

Version

082821105A

Package

3600

Package

925

Rubber buffer with metal insert, 400x90x100 mm

CODE

Version

082826765 Buffer mm. 155x50

CODE

Version

Package

082826241

L=665 mm

1200

CODE

Version

Package

082826766

L=455 mm

852

Black rubber buffer for side boards

Black rubber buffer for side boards with washer inside

Catalogo 2014 eng.indb 190

02/07/2014 10:04:18

191

CODE

Version

082824321

Package

Buffer in neoprene C R BUFFER FOR BODY MOUNTIG BRACKETS

CODE

Version

082824322

Package

110

Buffer in neoprene C R BUFFER FOR BODY MOUNTIG BRACKETS

CODE

Version

Package

084515960

L=1000 mm

280

Rubber and aluminium profiles

NEOPRENE BUFFERS

Dust cover seal, nylon brush, aluminum profile - length 1000 mm

CODE

Version

Package

081309142A

L=4000 mm

1159

4000 mm bars

Catalogo 2014 eng.indb 191

02/07/2014 10:04:19

192

Locks - handles

193

TOGGLE LATCHES CODE

Version

Package

035425608

S.S.

035425609

Z.PL.

CODE

Version

Package

035425610

S.S.

035424858

Z.PL.

CODE

Version

Package

035425606

S.S.

035425607

Z.PL.

CODE

Version

Package

035425604

S.S.

190

035425605

Z.PL.

190

CODE

Version

Package

035425611

S.S.

100

035425612

Z.PL.

100

Z.PL.SMALL LOCK WITH CATCH mm. 60

Locks - handles

Toogle latches mm. 47

Toogle latches mm. 86

Toogle latches mm. 112

Toogle latches mm. 67,5

Catalogo 2014 eng.indb 193

02/07/2014 10:04:22

194

CLIMBING HANDLE CODE

Version

030400590

Package

158

Package

219

Package

141

Package

Locks - handles

Door pull handle in black-painted anodized aluminium

CODE

Version

030400580 Climb-up handle in bright aluminum

CODE

Version

026400567 Handle in bright aluminum - socket head screw 2-3 mm.

CODE

Version

030420377 Black plastic handle H=44

CODE

Version

Package

071925478

S.S.

368

Climbing handle - H=mm. 46

Catalogo 2014 eng.indb 194

02/07/2014 10:04:23

195

DOOR PULL HANDLES CODE

Version

030422806

Package

CODE

Version

Package

071920397

S.S.

436

Locks - handles

Black plastic door pull handle

Door pull handle Flush-mounted handle with return spring thickness mm 10

CODE

Version

Package

071900664

S.S.

250

CODE

Version

Package

071920437A

S.S.

135

071920436A

Z.PL.

145

Door pull handle

Catalogo 2014 eng.indb 195

02/07/2014 10:04:24

196

EXTERNAL LOCKS CODE

Version

030526207

Package

510

Package

600

Package

510

Locks - handles

Lock Rh-Lh- in black-painted aluminum with counterhandle without safety

CODE

Version

030526749 Lock Rh-Lh- in black-painted aluminum with counterhandle without safety

CODE

Version

030526208 Handle in black-painted aluminum, with key

CODE

Version

Package

030520744

Z.PL.

174

Z. pl. plate

Catalogo 2014 eng.indb 196

02/07/2014 10:04:25

197

EXTERNAL LOCKS CODE

Version

020315730

Package

330

CODE

Version

Package

020512926

348

020512981

348

Version

Package

252

Package

200

Locks - handles

Black plastic handle with key Rh-Lh

Lock with striker r.h- l.h. for art.020315730

CODE 020312816 Handle in black plastic with key

CODE 030525426

Version

Black plastic handle with key Rh-Lh

Catalogo 2014 eng.indb 197

02/07/2014 10:04:26

198

EXTERNAL LOCKS CODE

Version

030325085

Package

310

Package

175

Locks - handles

Recessed oval handle in plastic with key and gasket

CODE

Version

030525399 Plastic handle RH-LH

for art. 030525396A030525397A

CODE

Version

Package

030525396A

370

030525397A

370

Zinc-plated steel lock with fork , without striker, straight vertical lever

Catalogo 2014 eng.indb 198

02/07/2014 10:04:27

199

EXTERNAL LOCKS CODE

Version

020925654

Package

CODE

Version

030325653

Locks - handles

Key in polyamide with insert 06 in nichel plated alloy

Quarter-turn alloy Quarter-turn. Key rotation 90° with insert 06 . Protection against dust and streams of water according to IP65.

CODE

Version

Package

030325657

Z.PL.

Came for key barrel

Catalogo 2014 eng.indb 199

02/07/2014 10:04:27

200

RECESSED LOCKS WITH S.S. PLUNGER CODE

Version

Package

030520925B

S.S.

534

030520927B

Z.PL.

520

CODE

Version

Package

030520926B

S.S.

441

Version

Package

440

Locks - handles

Recessed handle with two keys

Recessed handle without key

CODE 030500016 Recessed handle with key zinc plated pressed plunger

Recessed lock in black painted steel, zinc plated pressed plunger, with knob for opening from inside

Catalogo 2014 eng.indb 200

02/07/2014 10:04:28

201

RECESSED LOCKS WITH NYLON PLUNGER CODE

Version

Package

030515853

S.S.

400

Recessed lock with n y l o n n i b, d r a w n handle grip, very suitable for ventilation doors.

CODE

Version

Package

030515672A

S.S.

390

030515674A

Z.PL.

400

Locks - handles

Recessed handle without key

Recessed handle without key Recessed locks with nylon nib, designed for opening from inside.

CODE

Version

Package

030515673A

S.S.

440

030515852A

Z.PL.

444

Recessed handle with two keys Recessed locks with nylon nib, designed for opening from inside.

Catalogo 2014 eng.indb 201

02/07/2014 10:04:29

202

RECESSED LOCKS - SPARE PARTS CODE

Version

Package

030515676

S.S.

CODE

Version

Package

071914156A

S.S.

CODE

Version

Package

071921935

S.S.

Locks - handles

Catch for handles

Key barrel with keys - 90째-

Tongue

Catalogo 2014 eng.indb 202

02/07/2014 10:04:29

203

SPRING BOLT LATCH CODE

Version

Package

035422278A

S.S.

354

035422247A

Z.PL.

345

Spring lock with retainer in open position, for outside mounting.

CODE

Version

Package

035422279A

S.S.

380

035422248A

Z.PL.

380

Spring bolt latch Spring lock with long tooth and retainer in open position, for outside mounting.

CODE

Version

Package

071800612A

Z.PL.

406

CODE

Version

Package

071810820Z

Z.PL.

1448

Locks - handles

Spring bolt latch

Square handle for cremone lock

Black cremone bolt Cremone bolt, to mount inside the door, closes in two directions. Range of bars 40 mm with rotation.

CODE

Version

071919201

Package

Black anodized aluminum keyhole cover for cremone bolt

Catalogo 2014 eng.indb 203

02/07/2014 10:04:30

204

INTERNAL LOCKS CODE

Version

020414554

Package

Locks - handles

Counterhandle in aluminum, square hole 8 mm

CODE

Version

Package

020500714

Z.PL.

CODE

Version

Package

020513903

Z.PL.

Version

Package

360

Zinc-plated steel lock, nylon tooth

Striker for lock

CODE 030612931B Irid. zinc-plated steel lock,nylon tooth

Catalogo 2014 eng.indb 204

02/07/2014 10:04:31

205

INTERNAL LOCKS CODE

Version

Package

020900605A

Z.PL.

CODE

Version

Package

020900606A

Z.PL.

CODE

Version

Package

020900607A

Z.PL.

106

CODE

Version

Package

020900608A

Z.PL.

172

Irid. zinc-plated steel lock with raised base

Locks - handles

Lock in iridescent z.pl. steel

Irid. zinc-plated steel lock

Lock in iridescent z.pl. steel

Catalogo 2014 eng.indb 205

02/07/2014 10:04:31

206

INTERNAL LOCKS CODE

Version

Package

020926420

Z.PL.

140

Version

Package

Locks - handles

Zinc-plated steel key

CODE 020900611 Key in bright aluminum

CODE

Version

020902342 Keyhole cover in black ABS opening 160째, keyhole diam. 16

Catalogo 2014 eng.indb 206

02/07/2014 10:04:32

207

LATCHES CODE

Version

Package

020500873A

Z.PL.

270

CODE

Version

Package

020500868A

Z.PL.

195

CODE

Version

Package

071815850

S.S.

212

Locks - handles

Door bolt

Complete lock set in AISI 304 stainless steel

Catalogo 2014 eng.indb 207

02/07/2014 10:04:32

208

BONNET HOOKS CODE

Version

Package

030518540A

Z.PL.

165

Package

196

Locks - handles

Zinc-plated steel adjustable bonnet hook complete with striker MM.105X45

Catalogo 2014 eng.indb 208

CODE 030802755

Version

Rubber bonnet hook mm. 115X34

02/07/2014 10:04:33

209

Gas springs

GAS SPRINGS

210

Gas springs

GAS SPRINGS

Use standard care and caution and follow these warnings: • The thrust of a gas spring will be calculated at 20°c, a higher or lower temperature would influence the thrust for about 3,5% every 10°c. The normal function proceeds within a temperature between -30°c and +80°c. Very hot environments with temperatures over 80°c a nd aggressive atmospheres cause gas spring malfunctions and may shorten its operating life. •

The assembling must be carried out as follows: in closed position the connection of the shaft has to be turned downside, this will facilitate the lubrication of the guide and of the seals and will permit a higher braking effect.

•

Ensure that the spring fittings are aligned to avoid buckling. If mounting hole is a through hole, use non threaded pins instead of screws. Avoid using blunt tools or abrasive materials that might damage the shaft surface. Avoid contact with corrosive agents or chemicals.

•

Machine vibration may affect the seals and shorten gas spring life.

•

Do not expose the gas spring to pulling forces exceeding the extension speed of the shaft.

•

Doors opened through gas springs should be equipped with an additional rod (such as in a car hood) which keeps the door open in case of gas spring failure.

HOW TO CHOOSE BEST SUITABLE GAS SPRING:

S = Gas spring thrust pressure in kg

N = Number of the gas springs

S = X x Y + 5 KG 2N x Z

Catalogo 2014 eng.indb 210

02/07/2014 10:04:36

211

GAS SPRINGS CODE

Version

Package

082500379D

Kg 10

180

082520461D

Kg 20

180

082520987D

Kg 30

177

CODE

Version

Package

082520464D

Kg 35

195

CODE

Version

Package

082520989D

Kg 25

223

CODE

Version

Package

082520469D

Kg 50

250

Gas springs

Gas spring MM.85-255-A3-B3

Gas spring MM.100-288-A3-B3

Gas spring MM.135-352 A3-B3

Gas spring MM.155-403-A3-B3

Catalogo 2014 eng.indb 211

02/07/2014 10:04:36

212

GAS SPRINGS CODE

Version

Package

082520472D

Kg 30

290

CODE

Version

Package

082520473D

Kg 50

400

CODE

Version

Package

082520475D

Kg 30

323

082520477D

Kg 40

313

CODE

Version

Package

082520994D

Kg 30

337

Gas springs

Gas spring MM.198-483-A3-B3

Gas spring MM.198-485 A3-B3

Gas spring MM.228-548-A3-B3

Gas spring MM.245-585-A3-B3

Catalogo 2014 eng.indb 212

02/07/2014 10:04:37

213

GAS SPRINGS CODE

Version

Package

082520480D

Kg 20

347

082520481D

Kg 30

347

CODE

Version

Package

082520479D

Kg 40

474

CODE

Version

Package

082520482D

Kg 60

521

082520483D

Kg 80

525

082510291D

Kg 110

524

CODE

Version

Package

082521381D

Kg 200

950

Gas springs

Gas spring MM.250-598-A3-B3

Gas spring MM.254-590-A3-B3

Gas spring MM.260-600-A15-B15

Gas spring MM.305-704-A15-B15

Catalogo 2014 eng.indb 213

02/07/2014 10:04:37

214

GAS SPRINGS CODE

Version

Package

082520484D

Kg 35

593

082520486D

Kg 55

608

082520487D

Kg 70

595

CODE

Version

Package

082510300D

Kg 100

1050

082510301D

Kg 130

1065

082521457D

Kg 200

1080

CODE

Version

Package

082520489D

Kg 80

661

082520144D

Kg 90

665

CODE

Version

Package

085025188A

Kg 100

640

082524323A

Kg 150

640

082523999B

Kg 200

640

082526278A

Kg 250

650

Gas springs

Gas spring MM.310-700-A15-B15

Gas spring MM.355-804-A15-B15

Gas spring MM.360-798-A15-B15

Gas springs

Catalogo 2014 eng.indb 214

02/07/2014 10:04:38

215

GAS SPRING BRACKETS CODE

Version

082514962

Package

120

Package

Gas springs

Black anodized aluminium set of two brackets for gas springs with Ø 8 mm. hole-Attacco A3-B3

CODE

Version

082524183 Female bracket in aluminium for gas springs A3-B3

CODE

Version

082525167 Aluminium male bracket for gas springs with Ø 8 mm. hole A3B3

Catalogo 2014 eng.indb 215

02/07/2014 10:04:39

216

GAS SPRING BRACKETS CODE

Version

082513963

Package

194

Package

100

Package

100

Gas springs

Black anodized aluminium set of two brackets for gas springs with Ø 8 mm. hole-A15-B15

CODE

Version

082520126 Aluminium male bracket for gas springs with Ø 8 mm. hole-A15B15

CODE

Version

082520127 Aluminium female bracket for gas springs with Ø 8 mm. hole-A15-B15

Catalogo 2014 eng.indb 216

02/07/2014 10:04:39

217

GAS SPRING BRACKETS CODE

Version

082525706

Package

115

Gas springs

Polymer set of two brackets for gas springs, brackets A15-B15.

Catalogo 2014 eng.indb 217

02/07/2014 10:04:40

218

Truck body components

219

HINGES FOR SIDE BOARDS CODE

Version

Package

035421963A

Z.PL.

435

Version

Package

472

CODE 035421964A

Truck body components

TIR hinge

TIR hinge without fixing holes raw H E AV Y T I R H I N G E MM.120X40

CODE

Version

Package

035412522

Z.PL.

Back plate

Catalogo 2014 eng.indb 219

02/07/2014 10:04:42

220

HINGES FOR SIDE BOARDS CODE

Version

Package

035421965A

Z.PL.

236

Version

Package

187

Truck body components

TIR hinge

CODE 035421966A TIR hinge without fixing holes raw

CODE

Version

Package

035402561

Z.PL.

CODE

Version

Package

083615917A

Z.PL.

100

Back plate

Zinc-plated steel female screw for fastening hinges on aluminum side boards of for tipper-bodies

Catalogo 2014 eng.indb 220

02/07/2014 10:04:43

221

SIDE BOARD LOCKS CODE

Version

Package

035414326

Z.PL.

1424

CODE

Version

Package

035413588

Z.PL.

193

CODE

Version

Package

035412182

Z.PL.

1022

Truck body components

T flush mounted lock without striker

Striker for flush mounted lock

Recessed articulated lock with straight tooth

Catalogo 2014 eng.indb 221

02/07/2014 10:04:44

222

Truck body components

SIDE BOARD LOCKS CODE

Version

Package

035420603A

S.S.

342

035402335A

Z.PL.

342

CODE

Version

Package

035421883A

Z.PL.

355

Outer lock without striker

Zinc-plated outer lock with padlock seat, without striker

CODE

Version

Package

035420604

S.S.

035402336

Z.PL.

Striker for outer lock

Catalogo 2014 eng.indb 222

02/07/2014 10:04:44

223

SIDE BOARD LOCKS CODE

Version

Package

035419397

Z.PL.

740

CODE

Version

Package

035402554

Z.PL.

130

CODE

Version

Package

035412857A

Z.PL.

974

CODE

Version

Package

035402556

Z.PL.

136

CODE

Version

Package

035415657

Z.PL.

285

Striker

Truck body components

External lock without striker

Zinc plated steel lock without striker

Striker

Zinc-plated steel lock with adjustable tooth and striker

Catalogo 2014 eng.indb 223

02/07/2014 10:04:45

224

Truck body components

ALUMINIUM PILLARS CODE

Version

Package

035821644A

H 400 RH

1050

035821645A

H 400 LH

1050

035821646A

H 500 RH

1190

035821647A

H 500 LH

1190

035821648A

H 600 RH

1260

035821649A

H 600 LH

1260

035821650A

H 800 RH

1530

035821651A

H 800 LH

1530

Aluminium pillar standard handle with wing WITHOUT CATCH

CODE

Version

Package

035821634A

H 400 RH

1038

035821635A

H 400 LH

1038

035821636A

H 500 RH

1280

035821637A

H 500 LH

1280

035821638A

H 600 RH

1250

035821639A

H 600 LH

1250

Aluminium pillar standard handle without wing WITHOUT CATCH

CODE

Version

Package

035821656A

H 400 RH

1185

035821657A

H 400 LH

1185

035821658A

H 600 RH

1410

035821659A

H 600 LH

1410

Aluminium pillar reversed opening handle with wing WITHOUT CATCH

Catalogo 2014 eng.indb 224

02/07/2014 10:04:47

225

CODE

Version

Package

035821652A

H 400 RH

1140

035821653A

H 400 LH

1140

035821654A

H 600 RH

1370

035821655A

H 600 LH

1370

Aluminium pillar reversed opening handle without wing WITHOUT CATCH

CODE

Version

035821668A

Package

Bare steel catch to be welded

CODE

Version

Package

035821669A

Z.PL.

CODE

Version

Package

035821670A

Z.PL.

Truck body components

ALUMINIUM PILLARS

Zinc plated steel catch

Zinc plated threaded steel catch

Catalogo 2014 eng.indb 225

02/07/2014 10:04:47

226

HOOP FITTINGS CODE 035412800A

Version

Package

100

137

Truck body components

Hoop fitting support in steel for side board covering

Catalogo 2014 eng.indb 226

02/07/2014 10:04:47