Catalogo 2017 eng by Cosmobile Srl

2017

Reg. No. 1175-A UNI EN ISO 9001:2008

Nr 50 100 12346 UNI EN ISO 9001: 2008

Reg. No. 1175-I BS OHSAS 18001:2007

PASTORE & LOMBARDI S.p.A. con socio unico soggetta a direzione e coordinamento da parte di Hilbe S.p.A. Via Don Minzoni 3, 40057 Cadriano di Granarolo Emilia (Bologna) - Italy Tel. +39 051 764111 - Fax +39 051 765414 Capitale Sociale â&#x201A;Ź 468.000 i.v. - R.I. Bologna, C.F. e P.IVA 03276650375 R.E.A. della C.C.I.A.A. di Bologna 277528 www.pastorelombardi.com - info@pastorelombardi.com

GENERAL INDICATIONS AND RECOMMENDED USE The indications given in this document refer to products supplied by Pastore & Lombardi. They help our Customers, either Manufacturers or Dealers, selecting the product which suits their needs best. Standard principles should be applied for all those products which are not included in the following notes: 1.

Select a product and product quantity according to the specifications and application of the finished product or industrial product.

Contact Pastore & Lombardi for any technical information which may help in the selection of the product

Pastore & Lombardi products are usually installed onto industrial products, either means of transportation or different systems, which have been designed and owned by Pastore & Lombardi customers or final customers. Pastore & Lombardi has no knowledge on these projects, their needs and specifications. Pastore & Lombardi shall not select any part and disclaim all responsibility. The installer shall be fully responsible for the selection of the parts which best suit to customer’s needs. Pastore & Lombardi is not responsible for any troubles caused by incorrect or improper installation of their products onto the final product. For an easier product selection, test reports by certified institutions are available at Pastore & Lombardi’s. Tests details are not included in the catalogue but are available on request. The customer shall inform Pastore & Lombardi formally on special projects, applications or use when ordering the product so that proper co-operation along with indications are given. Given information by the customer shall not be binding to Pastore & Lombardi who reserve to accept. On customer’s request and subject to prior approval by Pastore & Lombardi, tests can be carried out to check suitability to the specified application. Even though tests are carried out, Pastore & Lombardi is not responsible for actual suitability of the product to the specified use. Even though tests are carried out, this does not mean that projects, applications or special uses have been authorized. Pastore & Lombardi will accept complaints on their products only if referred to defects due to Pastore & Lombardi already existing when the product has been delivered to the customer.

steels and treatments Stainless steel products Austenitic steel AISI 304 is the kind of stainless steel used for all our products. This grade of steel features excellent resistance to corrosion and its mechanical characteristics are ideal for cold-forming, the typical process used to manufacture most of our products. Austenitic steel is classified as stainless steel thanks to its ability to develop a protective film on the surface when it comes in contact with the oxygen released in air, thus barring the way to corrosion and rust. It is nonmagnetic, and will retain its antioxidizing performance even when partially magnetized in the course of work hardening. To reproduce the conditions leading to optimum corrosion resistance, our products undergo a number of surface finish processes, such as electropolishing, brushing, shot-peening, that improve weatherability as well as the appearance of the product. These are preceded by the usual pickling and passivation processes to recreate the protective film. The user is advised to follow some precautions regarding their installation and use so that the characteristics of the stainless steel products are maintained. Welding Austenitic steel is easily welded. Recommended filler metal for welding, arc welding, welding rod or MIG welding is AISI308L. TIG welding, where the base metal is melted to join the weld edges, requires no special precautions. Note that all welding processes involve high temperatures, which lead to loss of corrosion resistance. For this reason, the heated areas should be quenched in water and then pickled to recreate the surface film. Contact the Manufacturer of the welding machine for further information. Fastening We recommend to use stainless steel fasteners only (screws, bolts, rivets, etc.). The combination with iron or other non noble metals leads to electrolytic corrosion that may damage both the stainless steel part and the fasteners. The Customer shall select the fastener type according to the project and needed capacity and strength, which are data unknown to Pastore & Lombardi. Assembly During the assembly procedures, iron particles may stick to the surface of stainless steel parts and trigger electrochemical reactions that eventually lead to corrosion. We recommend not to use any tools that have been used to work plain metals. In the event that our stainless steel products are somehow contaminated by iron particles, remove such contaminants and pickle the concerned areas. STEEL COMPONENTS WITH ELECTROLYTIC AND PASSIVATION COATING The two final products with electrolytic zinc plating for surface treating will be available in two different passivation types: 1ª - Fe/Zn 7 II (Electrolytic Zinc Coating, thickness 7µm + clear passivation Cr3), indicated in catalogue with text “Z.PL.” This kind of surface treatment gives the products a nice external feature and a protection for the stocking and movement of the material. 2ª - Fe/Zn 7 IV (Electrolytic Zinc Coating, thickness 7µm + iridescent passivation Cr3) , indicated in catalogue with text “IRIDZINC-PLATED”. This kind of surface treatment, compared with the previous one, a higher resistance against the agents of the atmosphere. A painting is recommended to provide an optimal protection for the usage of the components. In case of welding of our zinc plated components, the supplier of the welding machine should be informed accordingly regarding the material provided.

ORDINARY MAINTENANCE OF STAINLESS STEEL The factor determining the frequency and therefore the attention to be given to normal maintenance is the kind of climate/ environment which the generic component will withstand. The table hereunder (an extract from norm UNI EN ISO 12944-2) classifies the environment conditions according to their starkness. From C1 which identifies a NON problematic environment to C5 where the environment is particularly aggressive. CATEGORY

CORROSIVITY

ENVIRONMENT CHARACTERISTICS

VERY LOW

Dry and hot zones with a very low pollution rate

LOW

Temperate zones, low pollution (rural areas, small towns) [SO2<12µg/mq]

AVERAGE

Temperate zones, average pollution (urban, industrial areas, coast zones with low salinity) [SO2 12-40µg/mq]

HIGH

Temperate and polluted zones (industrial areas and coast zones with moderate salinity) [SO2 >40µg/mq]

C5-I

VERY HIGH

Temperate zones, high pollution (industrial areas with high humidity and aggressive atmosphere) [SO2>80µg/mq]

C5-M

VERY HIGH

Temperate zones, high pollution (coast zones and offshore areas with high salinity )

In cold zones or during winter periods the presence of salt used to melt the ice on the roads can represent a problem. In this case the environment becomes more aggressive and a more frequent cleaning of the component is recommended. In a climatic condition with starkness rate corresponding to C1-C2 a routine cleaning every 3-6 months is sufficient. As conditions become more critical, maintenance interventions must be more frequent. Ordinary maintenance consists in simple washing with fresh water using a clean cloth or a nylon sponge (Scotch Brite); normal detergents or neutral degreasers (car shampoo) can also be used. It is very important to rinse carefully after cleaning / use of the detergents, particularly in those critical areas such as narrow gaps or dead holes which – for their nature – keep more easily the substances with which they get in contact, thus creating a stagnating and aggressive environment for the material. In the table hereunder some suggestions are given on the use of suitable or NON suitable products for the cleaning and maintenance of stainless steel products. Cleaning product

USE

SUGGESTIONS

FRESH WATER

YES

If calcareous, spots can appear on the surface. To be rinsed carefully

DEIONIZED WATER

YES

It avoids the appearance of calcareous spots.

DETERGENTS/NEUTRAL DEGREASERS

YES

It is very important to rinse carefully

ABRASIVE POWDER DETERGENTS

CAUTION They can spoil the aesthetic appearance of the surface finishing

MURIATIC ACID

HYDROCHLORIC ACID BASED SOLUTIONS

CHLORINE WATER

HALIDES

PRODUCTS FOR SILVER CLEANING

CLEAN CLOTH

YES

NYLON SPONGE

YES

STAINLESS STEEL WOOL

CAUTION It does not contaminate the surface but can spoil the aesthetic aspect

NON-STAINLESS STEEL WOOL

If these products incidentally get in contact with the material it is important to allow very short contact times, to rinse abundantly and pay thorough attention that narrow gaps and dead holes /stagnating areas are clean

It must be made sure that there are no previous dust particles which may scratch the surface

May lead to iron contamination

EXTRAORDINARY MAINTENANCE OF STAINLESS STEEL Despite the attention to be paid on routine maintenance, there is always the possibility of unforeseen events which can spoil – particularly if the intervention is not carried out in the right time– the integrity of the component, affecting not only the surface. In these cases, especially if the level of damage is in an advanced phase, it is always advisable to contact an expert for surface treatments on stainless steels, who will give the correct suggestions on the products to be used and the application procedures. As a completion, the table hereunder is indicating some of the most usual inconveniences which may occur to the component and the remedies to solve or improve the problem. PROBLEM

DESCRIPTIONS

SOLUTION

FERROUS CONTAMINATION

Iron particles which may remain trapped on the surface of the stainless steel product in a direct way, such as using brushes or sponges with non-stainless steel wires, or in an indirect way such as grinding carried out on a simple steel located close to the stainless steel product. The iron particle in contact with the stainless one will oxidize very quickly (rust) causing spotting on the surface, which – in some cases – can lead to localized corrosion

If still in a starting phase, an intervention can be made through simple washings possibly using also nylon sponges. On the contrary, if the event is more evident, especially in cases where the surface already shows marks of localized corrosive activity (pitting), it is necessary to contact an expert of surface treatments for stainless steel

GENERIC CONTAMINATION

Non-iron particles or tenacious dirt, glue remnants or other exogenous materials

In case of contamination with other metals such as aluminum, copper, etc., the procedures for the treatment are the same as for ferrous. In case of glue remnants or tenacious dirt, degreasers or solvents such as acetone can be used. It is essential to rinse abundantly after their use. On the contrary, if the contamination has developed into localized corrosion of the material, an expert must be contacted as described in the above point

SURFACE SCRATCHES

OILS AND GREASE REMNANTS

PAINTS OR GRAFFITI

CEMENT, MORTAR,PLASTER

Accidental scratches on the surface of stainless If it is certain that a ferrous contamination has not steel taken place (tool previously working on simple steels) a detergent/polish suitable for stainless steel can be applied using a soft cloth Accidental spatters or imprints

These can be removed using alcohol based products, or in some cases acetone. The application must be carried out with a soft cloth, so as not to scratch the surface. After that, it is necessary to rinse with water

Accidental spatters or vandalistic acts

To remove these surface signs, specific products must be used, generally alkaline or solvent paint removing products, then carefully rinse possibly with hot water (60°C).Mechanical removal (i.e. through a scraper or knives) must be avoided, because it would scratch the surface

Accidental splatters or imprints

These can be removed with water in solution with small percentages of phosphoric acid . After that a careful rinse with water and mop

A more aggressive climate condition will increase the possibility to have serious consequences on the integrity of the product (please refer to the table in the previous paragraph for the classification of environment starkness).

Indexes

Indexes 020312816...............................................198 020315730...............................................198 020500714...............................................205 020500868A............................................208 020500873A............................................208 020512926...............................................198 020512981...............................................198 020513903...............................................205 020801435...............................................106 020815680...............................................106 020815872...............................................105 020815873...............................................105 020815913...............................................105 020821095...............................................104 020823495B.............................................104 020823496B.............................................104 020823497B.............................................104 020823498B.............................................104 020823499B.............................................104 020825684...............................................104 020825685...............................................104 020825686...............................................104 020826729...............................................104 020900605A............................................206 020900606A............................................206 020900607A............................................206 020900608A............................................207 020902342...............................................207 020925654...............................................200 020926420...............................................207 024117267C............................................160 024120253E.............................................160 024121322C............................................160 024123667A............................................160 026400567...............................................195 030325085...............................................199 030325653...............................................200 030325657...............................................200 030327456...............................................199 030327457...............................................199 030400580...............................................195 030420377...............................................195 030422806...............................................196 030500016...............................................201 030515672A............................................202 030515673B.............................................202 030515674A............................................202 030515676...............................................203 030515852A............................................202 030515853...............................................202 030518540A............................................209 030520744...............................................197 030520752...............................................157 030520925C............................................201 030520926C............................................201 030520927C............................................201 030525396A............................................200 030525397A............................................200 030525399...............................................199

030525426...............................................198 030526207...............................................197 030526208...............................................197 030526749...............................................197 030612931B.............................................205 030802755...............................................209 030817767...............................................107 030825635...............................................107 030825641...............................................108 030825642...............................................108 030825643...............................................107 030825646...............................................107 030827458...............................................108 030827459...............................................108 033721187...............................................170 033721190...............................................170 033721191...............................................170 033721192...............................................170 033721193...............................................171 033721194...............................................171 033721195...............................................171 033721481...............................................171 034711231A............................................172 034711232A............................................172 034722281...............................................172 034722710B.............................................172 035023318...............................................172 035302484B.............................................175 035314494B.............................................175 035315473B.............................................175 035315991B.............................................173 035316080...............................................173 035317541...............................................169 035318534...............................................169 035318985A............................................173 035319522B.............................................175 035320686B.............................................173 035321301B.............................................174 035321513A............................................174 035323020A............................................174 035325270...............................................174 035402335A............................................222 035402336...............................................222 035402554...............................................223 035402556...............................................223 035402561...............................................220 035410999A............................................169 035412182...............................................221 035412522...............................................219 035412800A............................................226 035412857A............................................223 035413588...............................................221 035414326...............................................221 035415657...............................................223 035419397...............................................223 035420603A............................................222 035420604...............................................222 035421883A............................................222 035421963A............................................219

035421964A............................................219 035421965A............................................220 035421966A............................................220 035422247A............................................204 035422248A............................................204 035422278A............................................204 035422279A............................................204 035424858...............................................194 035425604...............................................194 035425605...............................................194 035425606...............................................194 035425607...............................................194 035425608...............................................194 035425609...............................................194 035425610...............................................194 035425611...............................................194 035425612...............................................194 035515800A............................................140 035516148...............................................140 035517576...............................................138 035519332...............................................132 035519332...............................................136 035519332...............................................138 035520031A............................................138 035521236A............................................138 035521469...............................................139 035525393...............................................139 035526389...............................................139 035623535...............................................168 035625978...............................................168 035625979...............................................168 035821652A............................................224 035821653A............................................224 035821654A............................................224 035821655A............................................224 035821656A............................................224 035821657A............................................224 035821658A............................................224 035821659A............................................224 035821668A............................................225 035821669A............................................224 035821670A............................................225 037317551...............................................162 037317552...............................................162 038617455A............................................165 038624184...............................................166 038625438...............................................166 038627012A............................................165 038627013A............................................165 038627014A............................................165 038627015A............................................165 038627148...............................................165 038627149...............................................165 070115766................................................. 89 070116074A.............................................. 88 070116351A.............................................. 88 070116966A.............................................. 86 070120776A.............................................. 82 070120783................................................. 84

070122152C.............................................. 92 070122153A.............................................. 92 070122685C.............................................. 88 070122766D.............................................. 87 070123707A.............................................. 85 070123716................................................. 85 070200400................................................. 89 070215127B............................................... 88 070215462B............................................... 88 070220777A.............................................. 82 070221827................................................. 86 070322203A.............................................. 89 070322204B............................................... 86 070322207B............................................... 82 070322208A.............................................. 87 070322210B............................................... 82 070322215A.............................................. 86 070322631A.............................................. 84 070322977B............................................... 89 070324866................................................. 85 070326237................................................. 85 070326242................................................. 83 070326243................................................. 84 070326251................................................. 84 070326343................................................. 83 070422217A.............................................. 89 070422690B............................................... 89 070514508A.............................................. 91 070514509A.............................................. 90 070515848................................................. 90 070516283A.............................................. 90 070521111A.............................................. 90 070524525................................................. 87 070527368................................................. 90 070810489B............................................... 96 070820809A.............................................. 97 070821919A.............................................. 98 070821921A.............................................. 98 070822013A.............................................. 96 070822015A.............................................. 95 070822015A............................................157 070822017A.............................................. 95 070822043A.............................................. 98 070822154B.............................................100 070822309B.............................................100 070822750B............................................... 97 070822750B.............................................157 070822752B............................................... 97 070823235................................................. 97 070823280A............................................100 070824999A............................................101 070825000A............................................101 070825004A.............................................. 95 070825055A.............................................. 96 070900277A.............................................. 99 070910490B............................................... 96 070912686A.............................................. 99 070920810A.............................................. 97 070921920A.............................................. 98

070921922A.............................................. 98 070922014A.............................................. 96 070922016A.............................................. 95 070922016A............................................157 070922751B............................................... 97 070922751B.............................................157 070922753B............................................... 97 070923526A.............................................. 95 071019198C............................................154 071019290...............................................158 071020152C............................................154 071020355A............................................155 071020935A............................................159 071021893...............................................159 071021923B.............................................154 071222163A.............................................. 36 071222167A.............................................. 48 071225570A.............................................. 63 071226125................................................. 63 071226304................................................. 42 071226305................................................. 64 071226309................................................. 56 071226319................................................. 48 071322164A.............................................. 36 071322189E............................................... 63 071323606A.............................................. 33 071324718C.............................................. 74 071326310................................................. 42 071326310................................................. 56 071326341................................................. 42 071326342................................................. 56 071326414................................................. 48 071326415................................................. 63 071327344................................................. 73 071425859................................................. 22 071425950C.............................................. 14 071425951C.............................................. 14 071425952C.............................................. 15 071425953C.............................................. 15 071625856................................................. 77 071625858................................................. 77 071626109................................................. 79 071626356................................................. 79 071626904................................................. 77 071800612A............................................204 071810820Z.............................................204 071815850...............................................208 071900664...............................................196 071911183................................................. 49 071911183................................................. 65 071911258A.............................................. 62 071911259A.............................................. 62 071911463................................................. 61 071911463...............................................125 071912447................................................. 49 071912447................................................. 65 071912448................................................. 49 071912448................................................. 65 071912449................................................. 49

071912449................................................. 65 071912453................................................. 50 071912453................................................. 66 071912972................................................. 35 071913139................................................. 37 071913141................................................. 37 071913142................................................. 37 071913145................................................. 37 071913146................................................. 37 071913148................................................. 35 071913154................................................. 35 071913155................................................. 35 071913158................................................. 35 071913159................................................. 35 071913831................................................. 47 071913832................................................. 47 071913942................................................. 50 071913942................................................. 66 071913949................................................. 35 071913993................................................. 47 071915128................................................. 41 071915128................................................. 55 071915129................................................. 41 071915129................................................. 55 071915260................................................. 91 071915479................................................. 78 071915480................................................. 20 071915480................................................. 28 071915480................................................. 38 071915480................................................. 51 071915480................................................. 69 071916324................................................. 61 071916344................................................. 47 071916973A.............................................. 91 071917418A.............................................. 65 071917419A.............................................. 65 071917420A.............................................. 49 071917421A.............................................. 49 071917544A.............................................. 58 071919201...............................................204 071919206A............................................125 071919340................................................. 43 071919340................................................. 57 071919341................................................. 43 071919341................................................. 57 071919407A.............................................. 58 071920120...............................................125 071920299A.............................................. 43 071920299A.............................................. 57 071920300A.............................................. 43 071920300A.............................................. 57 071920301................................................. 50 071920301................................................. 66 071920397...............................................196 071920436A............................................196 071920437A............................................196 071920618A.............................................. 18 071920618A.............................................. 23 071920619A.............................................. 18

Indexes

Indexes 071920619A.............................................. 23 071920622................................................. 18 071920622................................................. 23 071921019A.............................................. 45 071921020................................................. 45 071921021................................................. 45 071921023................................................. 44 071921024A.............................................. 44 071921058................................................. 61 071921058...............................................125 071921088................................................. 59 071921089................................................. 59 071921103................................................. 62 071921569A.............................................. 43 071921569A.............................................. 57 071921602................................................. 49 071921602................................................. 65 071921603................................................. 49 071921603................................................. 65 071921805...............................................155 071921929................................................. 29 071921929................................................. 69 071921933................................................. 50 071921933................................................. 66 071921934................................................. 78 071921935...............................................203 071921968................................................. 59 071921969................................................. 59 071922018A.............................................. 41 071922018A.............................................. 55 071922019................................................. 41 071922019................................................. 55 071922131................................................. 19 071922131................................................. 34 071922131................................................. 45 071922131................................................. 62 071922133................................................. 26 071922382................................................. 59 071922383................................................. 59 071922443................................................. 44 071922444................................................. 61 071922483................................................. 24 071922484A.............................................. 19 071922484A.............................................. 24 071922651................................................. 27 071922679................................................. 58 071922680................................................. 59 071922684................................................. 18 071922684................................................. 23 071922701A.............................................. 78 071922754A.............................................. 22 071922756................................................. 18 071922756................................................. 23 071922757................................................. 18 071922757................................................. 23 071922760................................................. 18 071922760................................................. 23 071922761................................................. 18 071922761................................................. 23

071922890................................................. 28 071922890................................................. 70 071922890A.............................................. 20 071922890A.............................................. 38 071922890A.............................................. 51 071922890A.............................................. 67 071922907................................................. 29 071922907................................................. 70 071922908A.............................................. 17 071923115................................................. 17 071923187................................................. 92 071923438................................................. 16 071923442................................................. 25 071923503................................................. 16 071923588................................................. 45 071923636................................................. 61 071923641................................................. 34 071923642................................................. 34 071923643................................................. 34 071923644................................................. 34 071923656................................................. 47 071923950................................................. 19 071924130................................................. 46 071924131................................................. 60 071924146................................................. 18 071924146................................................. 23 071924147................................................. 18 071924147................................................. 23 071924339................................................. 46 071924339................................................. 60 071924341................................................. 46 071924341................................................. 60 071924349A.............................................. 46 071924349A.............................................. 60 071924351A.............................................. 46 071924351A.............................................. 60 071924359................................................. 73 071924359................................................. 74 071924493................................................. 29 071924546................................................. 91 071924547................................................. 91 071924614................................................. 29 071924669................................................. 47 071924985................................................. 47 071924985................................................. 62 071925016................................................. 29 071925189F............................................... 27 071925189F............................................... 54 071925190C.............................................. 68 071925201................................................. 16 071925478...............................................195 071925851................................................. 20 071925851................................................. 38 071925873................................................. 25 071925948D.............................................. 26 071925948D.............................................. 41 071925949B............................................... 33 071926011................................................. 21 071926011................................................. 29

071926011................................................. 39 071926011................................................. 69 071926015................................................. 25 071926024................................................. 46 071926024................................................. 60 071926029A.............................................. 46 071926029A.............................................. 60 071926152A.............................................. 52 071926153................................................. 79 071926175...............................................161 071926209...............................................161 071926274A.............................................. 21 071926274A.............................................. 39 071926298A.............................................. 27 071926299A.............................................. 26 071926412................................................. 44 071926413................................................. 44 071926520................................................. 54 071926677................................................. 67 071926780................................................. 28 071926780................................................. 70 071926781................................................. 21 071926781................................................. 39 071926883................................................. 54 071926918A.............................................. 51 071926918A.............................................. 67 071926939................................................. 52 071926939................................................. 68 071927025................................................. 28 071927025................................................. 69 071927026................................................. 28 071927026................................................. 69 071927027................................................. 28 071927027................................................. 69 071927028................................................. 28 071927028................................................. 69 071927029................................................. 28 071927029................................................. 69 071927030................................................. 28 071927030................................................. 69 071927031................................................. 28 071927031................................................. 69 071927032................................................. 28 071927032................................................. 69 071927033................................................. 28 071927033................................................. 69 071927034................................................. 28 071927034................................................. 69 071927035................................................. 25 071927036................................................. 25 071927037................................................. 25 071927038................................................. 25 071927039................................................. 25 071927040................................................. 25 071927041................................................. 25 071927042................................................. 25 071927043................................................. 25 071927044................................................. 25 071927045................................................. 20

071927045................................................. 38 071927045................................................. 51 071927045................................................. 67 071927046................................................. 20 071927046................................................. 38 071927046................................................. 51 071927046................................................. 67 071927047................................................. 20 071927047................................................. 38 071927047................................................. 51 071927047................................................. 67 071927048................................................. 20 071927048................................................. 38 071927048................................................. 51 071927048................................................. 67 071927049................................................. 20 071927049................................................. 38 071927049................................................. 51 071927049................................................. 67 071927050................................................. 20 071927050................................................. 38 071927050................................................. 51 071927050................................................. 67 071927051................................................. 20 071927051................................................. 38 071927051................................................. 51 071927051................................................. 67 071927052................................................. 20 071927052................................................. 38 071927052................................................. 51 071927052................................................. 67 071927053................................................. 20 071927053................................................. 38 071927053................................................. 51 071927053................................................. 67 071927054................................................. 20 071927054................................................. 38 071927054................................................. 51 071927054................................................. 67 071927139................................................. 73 071927181................................................. 19 071927469...............................................203 071927470...............................................203 071927471...............................................203 071927472...............................................203 071927473...............................................203 071927474...............................................203 071927475...............................................203 071927476...............................................203 071927477...............................................203 071927478...............................................203 071927507................................................. 79 072009462B.............................................184 072010310B.............................................184 072014003A............................................184 072016554B.............................................184 072016555C............................................184 072016746B.............................................184 072020669...............................................185

072020670...............................................184 072021425C............................................181 072021426C............................................181 072021451A............................................181 072021544B.............................................156 072021545B.............................................156 072022021C............................................180 072022343...............................................181 072022617B.............................................185 072022618B.............................................185 072023872...............................................185 072025591...............................................180 072026354A............................................156 072027103...............................................179 072027104...............................................179 072027219...............................................179 072027220...............................................179 072027358...............................................179 072027559...............................................180 072301080...............................................117 072301288...............................................116 072301289...............................................116 072301290...............................................116 072301291...............................................116 072301292...............................................116 072301295A............................................116 072301296...............................................116 072301331A............................................117 072301332...............................................117 072301333...............................................117 072301449...............................................115 072310944...............................................114 072310945...............................................114 072310946...............................................114 072310947...............................................114 072312524...............................................114 072312525...............................................114 072312898...............................................117 072319804...............................................115 072320381...............................................113 072320382...............................................113 072320865...............................................113 072322748...............................................114 072322749...............................................114 072323683...............................................113 072324765...............................................113 072325051...............................................111 072325816...............................................112 072325817...............................................112 072325818...............................................112 072325821...............................................112 072326695...............................................115 072327266...............................................111 072421585D............................................131 072421585D............................................135 072421585D............................................180 072423281...............................................130 072423282B.............................................130 072424176G............................................131

072424559A............................................131 072424559A............................................137 072424591H............................................128 072424601D............................................131 072424601D............................................135 072424602C............................................131 072425624C............................................137 072425674B.............................................132 072425674B.............................................136 072425674B.............................................137 072425893D............................................128 072426551B.............................................132 072426551B.............................................136 072426552C............................................132 072426552C............................................136 072426569E.............................................133 072426570B.............................................133 072426571...............................................135 072426572...............................................135 072426611...............................................129 072426618A............................................142 072426661...............................................137 072426727...............................................130 072426802A............................................130 072426802A............................................134 072515899...............................................121 072515899...............................................134 072515899...............................................137 072515902...............................................121 072518972...............................................122 072519001B.............................................121 072519456...............................................121 072519456...............................................134 072519456...............................................137 072520416B.............................................121 072520702C............................................120 072520741B.............................................120 072527461...............................................121 072527461...............................................134 072527461...............................................137 072621706...............................................123 072621709...............................................122 072621710...............................................122 072621711...............................................123 072621733...............................................123 072622158B.............................................124 072622298...............................................122 072622299...............................................124 072622420...............................................124 072626131...............................................124 072726348B.............................................144 072726348B.............................................147 072726382A............................................146 072726382A............................................149 072726489...............................................146 072726489...............................................149 072726728...............................................146 072726728...............................................149 072727429...............................................144

Indexes

Indexes 072727430...............................................147 072727431...............................................145 072727432...............................................148 072727433...............................................145 072727434...............................................148 072727435...............................................145 072727435...............................................148 072727436...............................................145 072727436...............................................148 072727437...............................................144 072727437...............................................147 072727544...............................................146 072727544...............................................149 072821682...............................................191 075022423................................................. 58 075025299B............................................... 74 075026322A............................................158 075027225...............................................155 080522910................................................. 17 081217079A............................................182 081309142A............................................192 081317202...............................................105 081327481...............................................186 081327482...............................................186 081400453A............................................105 081409292A............................................182 081409327A............................................182 081409387A............................................182 081409471A............................................183 081409503C............................................183 081409504B.............................................183 081409533B.............................................183 081414337C............................................182 081607547C............................................177 081613369...............................................177 081614121D............................................177 081621989C............................................178 081621990C............................................178 081621992C............................................178 082500379D............................................212 082510291D............................................214 082510300D............................................215 082510301D............................................215 082513963...............................................217 082514962...............................................216 082520126...............................................217 082520127...............................................217 082520144D............................................215 082520461D............................................212 082520464D............................................212 082520469D............................................212 082520472D............................................213 082520473D............................................213 082520475D............................................213 082520477D............................................213 082520479D............................................214 082520480D............................................214 082520481D............................................214 082520482D............................................214

082520483D............................................214 082520484D............................................215 082520486D............................................215 082520487D............................................215 082520489D............................................215 082520987D............................................212 082520989D............................................212 082520994D............................................213 082521381D............................................214 082521457D............................................215 082523999C............................................129 082523999C............................................134 082524183...............................................216 082524323B.............................................129 082524323B.............................................134 082525167...............................................216 082526278B.............................................129 082526278B.............................................134 082527624...............................................129 082527624...............................................134 082527625...............................................129 082527625...............................................134 082807885...............................................187 082807954...............................................187 082807970B.............................................188 082807975...............................................188 082807995C............................................188 082807996B.............................................190 082808003...............................................187 082813790A............................................191 082819534C............................................189 082819535C............................................189 082819536C............................................189 082819537C............................................190 082820215A............................................189 082821105A............................................190 082821523B.............................................190 082821607A............................................161 082824054B.............................................187 082824321...............................................192 082824322...............................................192 082826241...............................................191 082826766...............................................191 082827514...............................................188 083400475...............................................152 083400476...............................................153 083400478...............................................153 083402509A............................................152 083423367...............................................153 083425942A............................................158 083426154...............................................151 083426155...............................................151 083426156C............................................151 083426157B.............................................151 083426662C............................................152 083426663C ...........................................152 083615917A............................................220 084515960...............................................192 085025188B.............................................129

085025188B.............................................134

RECESSED DOOR LOCKS FOR Ø16 MM BAR....................................... 14 RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS...... 16 RECESSED DOOR LOCKS FOR Ø 16 MM BAR - SPARE PARTS........ 20 RECESSED DOOR LOCKS FOR Ø 15 MM BAR...................................... 22 RECESSED DOOR LOCKS FOR Ø 15 - COMPONENTS....................... 23 RECESSED DOOR LOCKS FOR Ø 15 MM BAR - SPARE PARTS........ 25 RECESSED DOOR LOCKS FOR Ø 22 MM BAR ..................................... 26 RECESSED DOOR LOCKS FOR Ø 27 MM BAR ..................................... 27 RECESSED DOOR LOCKS PREVIOUS VERSIONS - SPARE PARTS... 28 EXTERNAL LOCKS Ø 16 MM..................................................................... 32 EXTERNAL LOCKS Ø 16 MM - COMPONENTS.................................... 34 EXTERNAL LOCKS Ø 16 MM - SETS........................................................ 36 EXTERNAL LOCKS Ø 16 MM - SPARE PARTS........................................ 37 EXTERNAL LOCKS Ø 22 MM..................................................................... 40 EXTERNAL LOCKS Ø 22 MM - COMPONENTS.................................... 44 EXTERNAL LOCKS Ø 22 MM - SETS........................................................ 48 EXTERNAL LOCKS Ø 22 MM - SPARE PARTS........................................ 49 EXTERNAL LOCKS Ø 27 MM..................................................................... 53 EXTERNAL LOCKS Ø 27 MM - COMPONENTS.................................... 58 EXTERNAL LOCKS Ø 27 MM - SETS........................................................ 63 EXTERNAL LOCKS Ø 27 MM - SPARE PARTS........................................ 65 EXTERNAL LOCKS PREVIOUS VERSIONS - SPARE PARTS................ 69 REAR DOOR LOCK SL2............................................................................... 73 REAR DOOR LOCK SLIM............................................................................. 74 LOCKS FOR REFRIGERATED VANS.......................................................... 77 LOCKS FOR REFRIGERATED VANS - SPARE PARTS............................. 78 REAR DOOR HINGES................................................................................... 82 BRACKETS FOR REAR DOOR HINGES.................................................... 83 BRACKETS FOR REAR DOOR HINGES - SPARE PARTS...................... 90 RECESSED REAR DOOR HINGES.............................................................. 92 EXTERNAL SIDE DOOR HINGES.............................................................. 95 RECESSED SIDE DOOR HINGES.............................................................100 CONTINUOUS POLIALL HINGES...........................................................102 CONTINUOUS HINGES............................................................................105 ALUMINIUM HINGES.................................................................................106 OTHER HINGES...........................................................................................107 UNDER CHASSIS DOOR RETAINERS.....................................................111 LATERAL DOOR RETAINERS....................................................................113 MEAT TRANSPORT RAIL SYSTEM..........................................................120 MEAT TRANSPORT TUBOLAR SYSTEM................................................122 SIDE WALL MEAT TRANSPORTATION .................................................125 LIFTING ARMS SYSTEM WITH RAIL AND RACK...............................128 LIFTERS FOR INNER WALL.......................................................................133 LIFTER ARMS FOR LIGHT LIFTING WALL............................................137 CARGO RESTRAINT SYSTEMS................................................................138 CLOTHING TRANSPORT SYSTEM..........................................................140 SYSTEM FOR SLIDING DOOR.................................................................141 FOLDING SHELF MODULE 1000x500.................................................144 FOLDING SHELF MODULE 1000x420.................................................147 ELECTRIC AERATORS 12-24 V CE..........................................................151 SPARE PARTS FOR ELECTRIC AERATORS 12-24 V............................152 VENTILATION HATCHES FOR ISOTHERMAL VEHICLES..................154 VENTILATION HATCHES FOR ISOTHERMAL VEHICLES - SPARES.156 AERATION GRILLS......................................................................................158 FILLER FLAPS...............................................................................................160 HANDLES FOR WINDOWS......................................................................162 CEILING LIGHTS..........................................................................................163 CEILING LIGHTS - SPARE PARTS............................................................166 DRAINING BOXES.......................................................................................168 ROPE HOOKS...............................................................................................169 MUDGUARDS..............................................................................................170 LADDERS AND STEPS...............................................................................172 BOX FIXING BRACKETS............................................................................173 BODY MOUNTING BRACKETS................................................................175 GUISNAP.......................................................................................................177 DUAL HARDNESS PVC SEALS................................................................179 RUBBER PROFILES AND OTHER PROFILES........................................182 WINDOW SEALS.........................................................................................183 DOOR SEALS................................................................................................184

BUFFERS........................................................................................................187 NEOPRENE BUFFERS.................................................................................192 TOGGLE LATCHES......................................................................................194 CLIMBING HANDLE...................................................................................195 DOOR PULL HANDLES.............................................................................196 EXTERNAL LOCKS......................................................................................197 RECESSED LOCKS WITH S.S. PLUNGER...............................................201 RECESSED LOCKS WITH NYLON PLUNGER........................................202 RECESSED LOCKS - SPARE PARTS.........................................................203 SPRING BOLT LATCH.................................................................................204 INTERNAL LOCKS.......................................................................................205 LATCHES........................................................................................................208 BONNET HOOKS.........................................................................................209 GAS SPRINGS ..............................................................................................210 GAS SPRING BRACKETS...........................................................................216 HINGES FOR SIDE BOARDS.....................................................................219 SIDE BOARD LOCKS..................................................................................221 ALUMINIUM PILLARS................................................................................224 HOOP FITTINGS..........................................................................................226

Indexes

INDEXES

Door locks

RECESSED DOOR LOCKS

Recessed locks are door closing/opening devices that do not extend beyond the door surface. The rod that operates the latch pawls is embedded in the door. Recessed locks are normally used on side doors, where any protruding elements are best avoided. Recessed locks consist of a housing and handle, both available under one part number. Suitable jigs ensure correct size of cutout for easy housing installation in the doors of insulated vans. It is essential that each handle be matched to its original housing, as they are tested as matched pairs during final testing at the factory, and mixing different components may result in minor discrepancies.

Use standard care and caution and follow these warnings: • •

Model selection from catalogue range depends on a number of factors, such as door dimensions and weight, type of seal, etc., which only the customer can evaluate. Please read the operating and maintenance information (listed below) printed on the leaflet contained in the package. Add the leaflet to the vehicle documents to be handed over to final user.

USE AND MAINTENANCE OF THE CLOSING SYSTEMS Pastore & Lombardi closing systems are produced and inspected according to the strictest quality controls. Like any other mechanical device, the closing systems can be subjected to stresses than can compromise their perfect operation. The stresses borne by a means of transportation of goods are particularly difficult to predict because they depend on many variables: the load, how it is arranged, the travelling conditions and, above all, the road conditions. It is for these reasons that we are listing below the rules for correct use and maintenance of Pastore & Lombardi closing systems: 1) ALWAYS CLOSE THE CLOSING SYSTEM WITH THE KEY BECAUSE ONLY IN THIS WAY CAN AN ACCIDENTAL OpENING OF THE DOOR WHEN THE VEHICLE IS IN MOVEMENT BE pREVENTED. 2) When you close the door, be sure that the push button is perfectly hooked by forcefully pulling the handle towards you. Periodically remove deposits of dust, debris or ice that may accumulate and that could prevent the push button from perfectly hooking. 3) Be sure that the springs under the push button are not broken. If they are, immediately order spare springs from the vehicle’s manufacturer or directly from Pastore & Lombardi. Before you replace them, take appropriate steps to avoid accidental opening of the door by, for example, closing the push button by hand and turning the key. It is very simple to replace the spring and is done by slipping it onto the pin. 4) In the case the key’s revolving plug breaks or does not work properly, replace it immediately. A number is engraved on the revolving plug and key. Order the revolving plug by giving this number to the vehicle’s manufacturer or directly to Pastore & Lombardi. 5) A proper periodical cleaning of stainless steel products is recommended, so that the aesthetic aspect and the resistance to corrosion are not affected. The cleaning must be carried out by means of general neutral cleansing agents (chloride-free), to be completed with an abundant water rinsing. Metallic abrasive sponges must not be used so as not to spoil the properties of stainless steel. Contact the vehicle’s manufacturer for any clarification you may need.

Door locks

GENERAL SpECIFICATIONS

RECESSED DOOR LOCKS FOR Ø16 MM BAR CODE

Version

Package

071425950C

S.S.

1200

Recessed handle height 23,5

Door locks

Recessed handle for aluminium or isothermal doors. Bar diameter 16 mm. Designed to open from inside. When mounting the bar, we suggest misaligning the cams with the four Spirol pins, making a hole with a Ø 5 bit, then opening the handle and welding the bar inside the slot. By misaligning we mean pulling aside the handle with respect to the cam. To obtain a 5° angle, proceed as follows: with the cam closed the handle coupling should be above the pushbutton.

CODE

Version

Package

071425951C

S.S.

1200

Recessed handle height 27,5

RECESSED DOOR LOCKS FOR Ø16 MM BAR CODE

Version

Package

071425952C

S.S.

1550

CODE

Version

Package

071425953C

S.S.

1575

Recessed handle height 34

Door locks

Recessed handle height 29

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

071923438

Package

White seal Ø mm. 16

Door locks

Nylon seal for insertion under the lip of the cup to prevent infiltration of water.

CODE

Version

071923503

Package

Black seal Black nylon seal for insertion under the lip of the cup to prevent infiltration of water.

CODE 071925201

Version

Package

Black seal Ø 16 Black nylon seal for insertion under the lip of the cup to prevent infiltration of water.

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

Package

071923115

S.S.

4850

071922908A

Z.PL.

4850

Bar assembled Ø 16 with welded cams. The customer is responsible for cutting the bar to the desired length. The two crop ends must be joined in the centre of the handle. The bar can then be connected by the pins and welded into the slot.

CODE 080522910

Version

Package

600

Bar guide tube, l=3 m - Ø 16 Bar guide pipe for insertion inside door, for Ø 16 bar.

Door locks

Welded bar 3 m, Ø 16

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

Package

071920622

S.S.

071922684

Door locks

Raw steel cam Ø MM. 15 - Ø MM. 16

CODE

Version

Package

071920618A

220

071920619A

220

S.S. Keeper Ø MM. 15- Ø MM.16 Forged keeper, working depth 11 mm

CODE

Version

Package

071924146

120

071924147

120

S.S. Keeper Ø MM. 15- Ø MM.16 Precision casted keeper reduced size with countersunk holes, working depth 12 mm

CODE

Version

Package

071922756

213

071922757

213

S.S. Keeper Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 16 mm

CODE

Version

Package

071922760

172

071922761

172

S.S. Keeper Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 11 mm

RECESSED DOOR LOCKS FOR Ø16 MM BAR - COMPONENTS CODE

Version

Package

071923950

S.S.

CODE

Version

Package

071922484A

Z.PL.

156

Version

Package

167

RH/LH keeper - Ø 15 - Ø 16

CODE 071922131

Complete internal opening device for external and recessed door locks To mount, recess the housing inside the door according to the door thickness, cut off the sleeve in the open part and the pin so that the bottom of the sleeve touches the bottom of the cup.

COD. 071927181

Ver.

Conf.

gr.

167

Internal opening device with low profile This system can be applied only to recessed door locks. To be installed on panels with a minimum thickness of 45 mm and recessed door lock with height 23,5 mm. High smoothness of the opening device with fluorescent adhesive label. .

Door locks

Cam for bar Ø16

Door locks

RECESSED DOOR LOCKS FOR Ø 16 MM BAR - SPARE PARTS CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071915480

S.S.

Key barrel 90°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071922890A

S.S.

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071925851

S.S.

Handle return spring for external and recessed door locks

RECESSED DOOR LOCKS FOR Ø 16 MM BAR - SPARE PARTS CODE

Version

Package

071926011

S.S.

CODE

Version

Package

071926274A

S.S.

Door locks

Handle spring

Flap for external door locks Ø mm 16 and recessed door locks

CODE

Version

Package

071926781

S.S.

Kit of push button rh-lh springs for external door locks Ø mm 16 and recessed door locks

RECESSED DOOR LOCKS FOR Ø 15 MM BAR CODE

Version

Package

071425859

S.S.

665

Recessed lock APE CAR

Door locks

Recessed closing mechanism for small Bar diameter 15 mm. To mount bar, misalign the cams, makes hole in the handle and bar, then insert the two pins. Not fitted for the opening from inside.

CODE

Version

Package

071922754A

Z.PL.

4250

Welded bar z.pl. l=3 m - Ø 15 Bar assembled Ø 15 with welded cams. The customer is responsible for cutting the bar to the desired length. The two crop ends must be joined in the centre of the handle. The bar can then be connected by the pins and welded into the slot.

RECESSED DOOR LOCKS FOR Ø 15 - COMPONENTS CODE

Version

Package

071920622

S.S.

071922684

CODE

Version

Package

071920618A

220

071920619A

220

S.S. Keeper Ø MM. 15- Ø MM.16 Forged keeper, working depth 11 mm

CODE

Version

Package

071924146

120

071924147

120

S.S. Keeper Ø MM. 15- Ø MM.16 Precision casted keeper reduced size with countersunk holes, working depth 12 mm

CODE

Version

Package

071922756

213

071922757

213

S.S. Keeper Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 16 mm

CODE

Version

Package

071922760

172

071922761

172

S.S. Keeper Ø MM. 15- Ø MM.16 Sheet steel keeper, working depth 11 mm

Door locks

Raw steel cam Ø MM. 15 - Ø MM. 16

RECESSED DOOR LOCKS FOR Ø 15 - COMPONENTS CODE

Version

Package

071922483

S.S.

CODE

Version

Package

071922484A

Z.PL.

156

Door locks

Cam for bar Ø 15

RH/LH keeper - Ø 15 - Ø 16

CODE

Key number

Package

071927035

3151

071927036

3152

071927037

3153

071927038

3154

071927039

3155

071927040

3156

071927041

3157

071927042

3158

071927043

3159

071927044

3160

CODE

Version

Package

071926015

S.S.

CODE

Version

Package

071925873

S.S.

CODE

Version

Package

071923442

S.S.

100

Key barrel 90°

Spare tongue for key barrel

Handle spring for lock APE CAR

Pin Kerb 5x21 -

Door locks

RECESSED DOOR LOCKS FOR Ø 15 MM BAR - SPARE PARTS

RECESSED DOOR LOCKS FOR Ø 22 MM BAR CODE

Version

Package

071926299A

S.S.

860

Recessed housing for lock Ø 22, complete with nylon bushes

Door locks

Recessed handle for isothermal rear and side doors with minimum thickness 50 mm. Housing without fixing holes. For tube Ø 22 mm. Any type of 22 mm diam. cam or keeper can be used. Not fitted for the opening from inside.

CODE

Version

Package

071925948D

S.S.

1450

External locking device Ø22 External handle designed for opening from inside

CODE

Version

Package

071922133

S.S.

190

Tube guide Ø 22

Used to keep the pipe in the correct position inside the door. Also serves as a keeper for the anti-rack washer of the cam. The guide pipe can be mounted either recessed or externally according to the keeper distance and the length of the tang of the cam

RECESSED DOOR LOCKS FOR Ø 27 MM BAR CODE

Version

Package

071926298A

S.S.

950

Recessed handle for isothermal rear and side doors with minimum thickness 50 mm. Housing without fixing holes. For tube Ø 27 mm. Any type of 27 mm diam. cam or keeper can be used. Not fitted for the opening from inside.

CODE

Version

Package

071925189F

S.S.

2285

external door gears Ø27 External handle for large-sized doors, designed for opening from inside

CODE

Version

Package

071922651

S.S.

250

Tube guide - Ø 27

Door locks

Recessed housing for lock Ø 27

CODE

Key number

Package

071927025

3001

071927026

3002

071927027

3003

071927028

3004

071927029

3005

071927030

3006

071927031

3007

071927032

3008

071927033

3009

071927034

3010

CODE

Version

Package

071915480

S.S.

Key barrel 180°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071926780

S.S.

Kit of push button rh-lh springs for external door locks and recessed door locks previous models

CODE

Version

Package

071922890

S.S.

Flap spring for previous models of external door locks

Ø6

Door locks

RECESSED DOOR LOCKS PREVIOUS VERSIONS - SPARE PARTS

For all types of closures 28

RECESSED DOOR LOCKS PREVIOUS VERSIONS - SPARE PARTS CODE

Version

Package

071922907

S.S.

CODE

Version

Package

071925016

S.S.

CODE

Version

Package

071921929

S.S.

Key barrel cover for recessed locks, 34 mm-Ø 16

Handle return spring for previous models of external and recessed door locks

CODE

Version

Package

071926011

S.S.

CODE

Version

Package

071924614

mm. 5x21

100

071924493

mm. 5x23

100

Handle spring

Spirol pin 21-23

Ø5

Door locks

Flap for previous models of external and recessed door locks

Door locks

EXTERNAL LOCKS

• LATCH PAWLS AND STRIKERS – This mechanism causes the rod to rotate and overcome seal friction to push the door slightly ajar or pull it close. Model selection from the catalogue range depends on a number of factors, such as door dimensions and weight, type of seal, and so on, which only the customer can evaluate correctly. • HANDLES AND LEVERS – They cause the rod to rotate and operate the latches. Handles require no additional components, whereas levers must be supplemented with a stop and a fastener, available as a kit. • ROD KEEPERS – They keep the rod in the correct position during rotation and act as end stops for the anti-rack washers. Our keepers feature nylon bushings for smoother rod rotation and perfect rod alignment • RODS – Exterior locks are grouped by rod diameter. Available sizes are Ø 16, 22 and 27.

Use standard care and caution and follow these warnings: • Model selection from catalogue range depends on a number of factors, such as door dimensions and weight, type of seal, etc. • During installation, the anti-rack washer of the pawl (or welded to the rod) must be resting on the fastener to avoid minor door movements that would affect hinges and locks. • Please read the operating and maintenance information ( listed below) printed on the leaflet contained in the package. Add the leaflet to the vehicle documents to be handed over to final user. USE AND MAINTENANCE OF THE CLOSING SYSTEMS Pastore & Lombardi closing systems are produced and inspected according to the strictest quality controls. Like any other mechanical device, the closing systems can be subjected to stresses than can compromise their perfect operation. The stresses borne by a means of transportation of goods are particularly difficult to predict because they depend on many variables: the load, how it is arranged, the travelling conditions and, above all, the road conditions. It is for these reasons that we are listing below the rules for correct use and maintenance of Pastore & Lombardi closing systems: 1. ALWAYS CLOSE THE CLOSING SYSTEM WITH THE KEY BECAUSE ONLY IN THIS WAY CAN AN ACCIDENTAL OpENING OF THE DOOR WHEN THE VEHICLE IS IN MOVEMENT BE pREVENTED. 2. When you close the door, be sure that the push button is perfectly hooked by forcefully pulling the handle towards you. Periodically remove deposits of dust, debris or ice that may accumulate and that could prevent the push button from perfectly hooking. 3.

Be sure that the springs under the push button are not broken. If they are, immediately order spare springs from the vehicle’s manufacturer or directly from Pastore & Lombardi. Before you replace them, take appropriate steps to avoid accidental opening of the door by, for example, closing the push button by hand and turning the key. It is very simple to replace the spring and is done by slipping it onto the pin. In the case the key’s revolving plug breaks or does not work properly, replace it immediately. A number is engraved on the revolving plug and key. Order the revolving plug by giving this number to the vehicle’s manufacturer or directly to Pastore & Lombardi.

5. A proper periodical cleaning of stainless steel products is recommended, so that the aesthetic aspect and the resistance to corrosion are not aﬀected. The cleaning must be carried out by means of general neutral cleansing agents (chloride-free), to be completed with an abundant water rinsing. Metallic abrasive sponges must not be used so as not to spoil the properties of stainless steel. Contact the vehicle’s manufacturer for any clarification you may need.

Door locks

Exterior locks are opening/closing devices installed on the outside of a door. Since they extend beyond the door surface, they are normally used on rear doors. Exterior locks consist of various elements: LATCH PAWLS AND STRIKERS, HANDLES OR LEVERS, ROD KEEPERS, ROD.

Door locks

EXTERNAL LOCKS Ã&#x2DC; 16 MM

EXTERNAL LOCKS Ø 16 MM CODE

Version

Package

071925949B

S.S.

960

External door handles Ø16

Door locks

External handle designed for opening from inside.

CODE

Version

Package

071323606A

Z.PL.

815

Kit lever, lever stay and lever clamp

EXTERNAL LOCKS Ă&#x2DC; 16 MM - COMPONENTS CODE

Version

Package

071923641

S.S.

130

071923643

Z.PL.

130

CODE

Version

Package

071923642

S.S.

190

071923644

Z.PL.

200

Version

Package

167

Door locks

Forged cam

Forged keeper

CODE 071922131

Complete internal opening device for external and recessed door locks

To mount, recess the housing inside the door according to the door thickness, cut off the sleeve in the open part and the pin so that the bottom of the sleeve touches the bottom of the cup.

EXTERNAL LOCKS Ø 16 MM - COMPONENTS CODE

Version

Package

071913158

S.S.

071913159

Z.PL.

100

Version

Package

100

CODE 071912972 Nylon half bush

CODE

Version

Package

071913154

S.S.

071913155

Z.PL.

CODE

Version

Package

071913949

S.S.

1700

071913148

Z.PL.

1700

Antirack washer

Z.pl. tube Ø 16, l=2500 mm

Door locks

Tube clamp

EXTERNAL LOCKS Ă&#x2DC; 16 MM - SETS CODE

Version

Package

071222163A

S.S.

1070

071322164A

Z.PL.

1070

Kit of components for Ă&#x2DC; 16 tube

Door locks

Art.

Inox/S.S./Nirosta

Nr.

0719 23642

Scontro/Keeper/Gegenhalter

0719 23641

Arpione/Cam/Schliesskeil

0719 13154

Rondella/Washer/Unterlegscheibe

0719 12972

Semiboccola/Half bush/Halbbuchse

0719 13158

Fissaggio/Clamp/Befestigung

Art.

Zinc./Z.PL./Verz.

Nr.

0719 23644

Scontro/Keeper/Gegenhalter

0719 23643

Arpione/Cam/Schliesskeil

0719 13155

Rondella/Washer/Unterlegscheibe

0719 12972

Semiboccola/Half bush/Halbbuchse

0719 13159

Fissaggio/Clamp/Befestigung

The anti-rack washer is welded on the tube by the user. Measurement x is therefore undefined.

EXTERNAL LOCKS Ã&#x2DC; 16 MM - SPARE PARTS CODE

Version

Package

071913139

Z.PL.

419

CODE

Version

Package

071913145

Z.PL.

135

CODE

Version

Package

071913146

S.S.

CODE

Version

Package

071913141

Z.PL.

216

CODE

Version

Package

071913142

S.S.

Lever clamp to weld on

Lever clamp pin

Lever stay without bush

Lever stay bush 18

Door locks

Flat lever with tongue for padlock or customs seal

Door locks

EXTERNAL LOCKS Ø 16 MM - SPARE PARTS CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071915480

S.S.

Key barrel 90°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071922890A

S.S.

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071925851

S.S.

Handle return spring for external and recessed door locks

EXTERNAL LOCKS Ø 16 MM - SPARE PARTS CODE

Version

Package

071926011

S.S.

CODE

Version

Package

071926274A

S.S.

Door locks

Handle spring

Flap for external door locks Ø mm 16 and recessed door locks

CODE

Version

Package

071926781

S.S.

Kit of push button rh-lh springs for external door locks Ø mm 16 and recessed door locks

Door locks

EXTERNAL LOCKS Ã&#x2DC; 22 MM

EXTERNAL LOCKS Ø 22 MM CODE

Version

Package

071925948D

S.S.

1450

External locking device Ø22

Door locks

External handle designed for opening from inside

CODE

Version

Package

071915128

S.S.

694

071915129

Z.PL.

680

Delta lever with coated handle for external door locks Ø mm22/ 27 Delta lever with coated grip, allows excellent grasp when opening door.

CODE

Version

Package

071922018A

S.S.

995

071922019

Z.PL.

965

flat lever with coated handle for external door locks Ø mm. 22/27

EXTERNAL LOCKS Ø 22 MM CODE

Version

Package

071226304

S.S.

365

071326341

Z.PL.

320

Kit Lever clamp Art.

Door locks

Inox/S.S./Nirosta

0719 17420A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12447 Vite TE -Screw-Schraube 12X25

0719 12448 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

Art. A

Zinc./Z.PL./Verz.

0719 17421A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12449 Vite TE -Screw-Schraube 12X25

0719 11183 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

CODE

Version

Package

071326310

Z.PL.

210

Kit lever clamp for external door locks Ø mm. 22/27

EXTERNAL LOCKS Ø 22 MM CODE

Version

Package

071919340

S.S.

720

071919341

Z.PL.

720

Lever stay TIR for external door locks Ø mm. 22/27

Door locks

TIR lever stay with spring cover to cover customs seal.

CODE

Version

Package

071920299A

S.S.

248

071920300A

Z.PL.

253

standard lever stay with holes Ø mm. 8,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 8,5 mm

CODE

Version

Package

071921569A

Z.PL.

250

Zinc plated standard lever stay with holes Ø mm.6,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 6,5 mm

EXTERNAL LOCKS Ã&#x2DC; 22 MM - COMPONENTS CODE

Version

Package

071921024A

S.S.

333

071926412

Z.PL.

350

Door locks

Cam BIG 6

BIG 6 cam with antirack washer machined on shank.

CODE

Version

Package

071922443

S.S.

580

Cam BIG 9 BIG 9 cam with antirack washer machined on elongated shank for seal bypass.

CODE

Version

Package

071921023

S.S.

349

071926413

Z.PL.

350

Keeper for BIG 6 - BIG 9

EXTERNAL LOCKS Ã&#x2DC; 22 MM - COMPONENTS CODE

Version

Package

071921021

S.S.

440

CODE

Version

Package

071921020

S.S.

136

071923588

Z.PL.

130

Version

Package

100

Package

167

Small tube clamp

CODE 071921019A Nylon bush

CODE

Version

071922131 Complete internal opening device for external and recessed door locks

To mount, recess the housing inside the door according to the door thickness, cut off the sleeve in the open part and the pin so that the bottom of the sleeve touches the bottom of the cup.

Door locks

Tube clamp

EXTERNAL LOCKS Ø 22 MM - COMPONENTS CODE

Version

Package

071926024

S.S.

580

071926029A

Z.PL.

650

CODE

Version

Package

071924349A

S.S.

440

071924351A

Z.PL.

442

CODE

Version

Package

071924339

S.S.

250

071924341

Z.PL.

253

Version

Package

100

Door locks

tube clamp BIG for external door locks Ø mm 22/27

tube clamp MEDIUM for external door locks Ø 22/27

tube clamp SMALL for external door locks Ø mm 22/27

CODE 071924130 Nylon bush Ø22

EXTERNAL LOCKS Ø 22 MM - COMPONENTS CODE

Version

071924985

Package

221

Rubber tube-clamp for side protection. To use as intermediate tube clamp. While rear door opening, the handle do not beat against to the sidewall. CODE

Version

071924669

Package

White Nylon half-bush Half-bush for rubberpuffer(2 half-bushes for 1 rubberpuffer)

CODE

Version

Package

071913831

S.S.

071913832

Z.PL.

CODE

Version

Package

071916344

S.S.

2450

CODE

Version

Package

071923656

S.S.

2950

071913993

Z.PL.

3000

Antirack washer

S.S. tube, polished, Ø 22x2x2500 mm.

tube, polished, Ø 22x2x3000 mm.

Door locks

Rubber buffer rod Ø mm 22/27

EXTERNAL LOCKS Ø 22 MM - SETS CODE

Version

Package

071226319

S.S.

1870

071326414

Z.PL.

1900

External door gear kit Tube BIG 6 Ø22

Door locks

Art.

Inox/S.S./Nirosta

0719 21023

0719 21024A Arpione/Cam/Schliesskeil

0719 13831

0719 21019A Boccola/Bush/Buchse

0719 21020

Art. A

0719 26413

Scontro/Keeper/Gegenhalter

Rondella/Washer/Unterlegscheibe

Fissaggio/Clamp/Befestigung

Zinc./Z.PL./Verz.

Nr.

Scontro/Keeper/Gegenhalter

0719 26412

Arpione/Cam/Schliesskeil

0719 13832

Rondella/Washer/Unterlegscheibe

0719 21019A Boccola/Bush/Buchse

0719 23588

Fissaggio/Clamp/Befestigung

The anti-rack washer is welded on the tube by the user. Measurement x is therefore undefined.

CODE

Version

Package

071222167A

S.S.

2565

External door gear Kit BIG 6 Ø22 Art. A

0719 21023

Nr. Scontro/Keeper/Gegenhalter

0719 21024A Arpione/Cam/Schliesskeil

0719 21019A Boccola/Bush/Buchse

0719 21021

Fissaggio/Clamp/Befestigung

0719 21020

Fissaggio/Clamp/Befestigung

The anti-rack washer is an integral part of the forged cam, the measurement on the drawing cannot be modified.

EXTERNAL LOCKS Ø 22 MM - SPARE PARTS CODE

Version

Package

071917420A

S.S.

266

071917421A

Z.PL.

270

Lever clamp

CODE

Version

Package

071921602

S.S.

155

071921603

Z.PL.

170

lever clamp to be welded for external door locks Ø mm. 22/27

CODE

Version

Package

071912447

S.S.

071912449

Z.PL.

CODE

Version

Package

071912448

S.S.

071911183

Z.PL.

screw TE M12x25 for external door locks Ø mm. 22/27

nut M12 low version for external door locks Ø mm. 22/27

Door locks

Lever fastened with square hole for clampby welding.

EXTERNAL LOCKS Ø 22 MM - SPARE PARTS CODE

Version

Package

071912453

S.S.

Door locks

Spacing bush for screw of external door locks Ø mm. 22/27

CODE

Version

Package

071913942

S.S.

Pin to be welded or riveted for external door locks Ø mm. 22/27

CODE

Version

Package

071921933

S.S.

CODE

Version

Package

071920301

S.S.

Spring for lever stay TIR

Bush for lever stay for external door locks Ø mm. 22/27

CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071915480

S.S.

Key barrel 90°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071922890A

S.S.

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071926918A

S.S.

Handle spring

Door locks

EXTERNAL LOCKS Ø 22 MM - SPARE PARTS

EXTERNAL LOCKS Ã&#x2DC; 22 MM - SPARE PARTS CODE

Version

071926152A

S.S.

Package

g. 40

Door locks

Flap

CODE

Version

Package

071926939

S.S.

Kit push-button spring

Door locks

EXTERNAL LOCKS Ã&#x2DC; 27 MM

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071925189F

S.S.

2285

external door gears Ø27

Door locks

External handle for large-sized doors, designed for opening from inside

CODE

Version

Package

071926520

S.S.

2160

external door gears Ø27 External handle for large-sized doors, designed for opening from inside

CODE

Version

Package

071926883

S.S.

2060

external door gears Ø27 External handle for large-sized doors, designed for opening from inside

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071915128

S.S.

694

071915129

Z.PL.

680

Delta lever with coated grip, allows excellent grasp when opening door.

CODE

Version

Package

071922018A

S.S.

995

071922019

Z.PL.

965

flat lever with coated handle for external door locks Ø mm. 22/27

Door locks

Delta lever with coated handle for external door locks Ø mm22/ 27

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071226309

S.S.

390

071326342

Z.PL.

370

Kit Lever clamp Art.

Door locks

Inox/S.S./Nirosta

0719 17418A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12447 Vite TE -Screw-Schraube 12X25

0719 12448 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

Art. A

Zinc./Z.PL./Verz.

0719 17419A Fissaggio leva/Lever clamp/Verschlussbefestigung

Nr. 1

0719 12449 Vite TE -Screw-Schraube 12X25

0719 11183 Dado-Nut-Schraubenmutter M12

0719 12453 Boccola-Bush-Buchse Ø 12x16x10,5 mm.

CODE

Version

Package

071326310

Z.PL.

210

Kit lever clamp for external door locks Ø mm. 22/27

EXTERNAL LOCKS Ø 27 MM CODE

Version

Package

071919340

S.S.

720

071919341

Z.PL.

720

Lever stay TIR for external door locks Ø mm. 22/27

Door locks

TIR lever stay with spring cover to cover customs seal.

CODE

Version

Package

071920299A

S.S.

248

071920300A

Z.PL.

253

standard lever stay with holes Ø mm. 8,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 8,5 mm

CODE

Version

Package

071921569A

Z.PL.

250

Zinc plated standard lever stay with holes Ø mm.6,5 for external door locks Ø mm. 22/27 Standard lever stay with holes for padlock and customs seal, complete with bush, hole 6,5 mm

EXTERNAL LOCKS Ø 27 MM - COMPONENTS CODE

Version

075022423

S.S.

Package

g. 1000

Cam BIG 2 for tube Ø27x2,5

Door locks

BIG 2 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071922679

S.S.

1012

Cam BIG 2 for tube Ø27x3 BIG 2 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071919407A

S.S.

624

Cam BIG 3 Cam BIG3 with antirack washer machined on shank.

CODE

Version

Package

071917544A

S.S.

584

Keeper for BIG 2 - BIG 3 -

EXTERNAL LOCKS Ø 27 MM - COMPONENTS CODE

Version

Package

071921968

S.S.

524

071922382

Z.PL.

513

Cam BIG 4 flattened 39

Ø 20.5

CODE

Version

Package

071922680

S.S.

865

Cam BIG 7 BIG 7 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071921969

S.S.

501

071922383

Z.PL.

512

CODE

Version

Package

071921088

S.S.

786

Keeper for BIG 4 - BIG 7

Cam BIG 5 BIG 5 cam with antirack washer machined on elongated shank for passing over seal.

CODE

Version

Package

071921089

S.S.

561

Keeper for BIG 5

Door locks

BIG 4 cam with antirack washer machined on shank.

EXTERNAL LOCKS Ø 27 MM - COMPONENTS CODE

Version

Package

071926024

S.S.

580

071926029A

Z.PL.

650

CODE

Version

Package

071924349A

S.S.

440

071924351A

Z.PL.

442

CODE

Version

Package

071924339

S.S.

250

071924341

Z.PL.

253

Version

Package

100

Door locks

tube clamp BIG for external door locks Ø mm 22/27

tube clamp MEDIUM for external door locks Ø 22/27

tube clamp SMALL for external door locks Ø mm 22/27

CODE 071924131 Nylon bush Ø27

EXTERNAL LOCKS Ã&#x2DC; 27 MM - COMPONENTS CODE

Version

Package

071916324

S.S.

3950

CODE

Version

Package

071922444

S.S.

4850

CODE

Version

Package

071921058

S.S.

4458

071911463

Z.PL.

4450

CODE

Version

Package

071923636

S.S.

4650

S.S. tube, polished, 2700x27x3 mm

STEEL TUBE, 3000X27X2,5 MM

S.S. tube, polished, 3300x27x2,5 mm

Door locks

S.s. tube 2600x27x2,5 mm

EXTERNAL LOCKS Ă&#x2DC; 27 MM - COMPONENTS CODE

Version

071924985

Package

221

Door locks

Rubber buffer rod Ă&#x2DC; mm 22/27 Rubber tube-clamp for side protection. To use as intermediate tube clamp. While rear door opening, the handle do not beat against to the sidewall.

CODE

Version

071921103

Package

100

Bush for rubber puffer

CODE

Version

Package

071911258A

S.S.

071911259A

Z.PL.

100

Version

Package

167

Antirack washer

CODE 071922131

EXTERNAL LOCKS Ø 27 MM - SETS CODE

Version

Package

071225570A

S.S.

3300

071326415

Z.PL.

3330

External door gear kit BIG 4 Ø27

Inox/S.S./Nirosta

Nr.

0719 21969

Scontro/Keeper/Gegenhalter

0719 21968

Arpione/Cam/Schliesskeil

0719 11258A Rondella/Washer/Unterlegscheibe

0719 24131

0719 24349A Fissaggio/Clamp/Befestigung

Fissaggio/Clamp/Befestigung

0719 24339

Art.

Boccola/Bush/Buchse

Zinc./Z.PL./Verz.

Nr.

0719 22383

Scontro/Keeper/Gegenhalter

0719 22382

Arpione/Cam/Schliesskeil

C D E F

0719 11259A Rondella/Washer/Unterlegscheibe 0719 24131

Boccola/Bush/Buchse

0719 24351A Fissaggio/Clamp/Befestigung

Fissaggio/Clamp/Befestigung

0719 24341

Door locks

Art.

The anti-rack washer is welded on the tube by the user. Measurement x is therefore undefined.

CODE

Version

Package

071226125

S.S.

3646

071322189E

Z.PL.

3663

External door gear kit BIG 4 Ø27 Art.

Nr.

0719 21969

Scontro/Keeper/Gegenhalter

0719 21968

Arpione/Cam/Schliesskeil

0719 24131

Boccola/Bush/Buchse

0719 26024

Fissaggio/Clamp/Befestigung

0719 24339

Fissaggio/Clamp/Befestigung

0719 22383

Scontro/Keeper/Gegenhalter

0719 22382

Arpione/Cam/Schliesskeil

0719 24131

Boccola/Bush/Buchse

0719 26029A Fissaggio/Clamp/Befestigung

0719 24341

Fissaggio/Clamp/Befestigung

Art.

Nr.

The anti-rack washer is an integral part of the forged cam, the measurement on the drawing cannot be modified.

EXTERNAL LOCKS Ø 27 MM - SETS CODE

Version

Package

071226305

S.S.

3750

External door gear KIT BIG 3 Ø27

Door locks

The anti-rack washer is an integral part of the forged cam the measurement on the drawing cannot be modified.

EXTERNAL LOCKS Ø 27 MM - SPARE PARTS CODE

Version

Package

071917418A

S.S.

315

071917419A

Z.PL.

335

Lever clamp

CODE

Version

Package

071921602

S.S.

155

071921603

Z.PL.

170

lever clamp to be welded for external door locks Ø mm. 22/27

CODE

Version

Package

071912447

S.S.

071912449

Z.PL.

CODE

Version

Package

071912448

S.S.

071911183

Z.PL.

screw TE M12x25 for external door locks Ø mm. 22/27

nut M12 low version for external door locks Ø mm. 22/27

Door locks

Lever fastened with square hole for clampby welding.

EXTERNAL LOCKS Ø 27 MM - SPARE PARTS CODE

Version

Package

071912453

S.S.

Door locks

Spacing bush for screw of external door locks Ø mm. 22/27

CODE

Version

Package

071913942

S.S.

Pin to be welded or riveted for external door locks Ø mm. 22/27

CODE

Version

Package

071921933

S.S.

CODE

Version

Package

071920301

S.S.

Spring for lever stay TIR

Bush for lever stay for external door locks Ø mm. 22/27

CODE

Key number

Package

071927045

PA01

071927046

PA02

071927047

PA03

071927048

PA04

071927049

PA05

071927050

PA06

071927051

PA07

071927052

PA08

071927053

PA09

071927054

PA10

CODE

Version

Package

071926677

S.S.

CODE

Version

Package

071922890A

S.S.

Key barrel 90°

Spare tongue for key barrel

Flap spring for external and recessed door locks For all types of closures

CODE

Version

Package

071926918A

S.S.

Handle spring

Door locks

EXTERNAL LOCKS Ø 27 MM - SPARE PARTS

EXTERNAL LOCKS Ã&#x2DC; 27 MM - SPARE PARTS CODE

Version

Package

071925190C

S.S.

CODE

Version

Package

071926939

S.S.

Door locks

Flap

Kit push-button spring

CODE

Key number

Package

071927025

3001

071927026

3002

071927027

3003

071927028

3004

071927029

3005

071927030

3006

071927031

3007

071927032

3008

071927033

3009

071927034

3010

CODE

Version

Package

071915480

S.S.

Key barrel 180Â°

Spare tongue for key barrel of external and recessed door locks

CODE

Version

Package

071921929

S.S.

Handle return spring for previous models of external and recessed door locks

CODE

Version

Package

071926011

S.S.

Handle spring

Door locks

EXTERNAL LOCKS PREVIOUS VERSIONS - SPARE PARTS

EXTERNAL LOCKS PREVIOUS VERSIONS - SPARE PARTS CODE

Version

Package

071922907

S.S.

CODE

Version

Package

071926780

S.S.

Kit of push button rh-lh springs for external door locks and recessed door locks previous models

CODE

Version

Package

071922890

S.S.

Flap spring for previous models of external door locks

Ã&#x2DC;6

Door locks

Flap for previous models of external and recessed door locks

For all types of closures 28

Door locks

REAR DOOR LOCK

REAR DOOR LOCK DESCRIPTION Locking devices for truck rear doors, includes one handle with its base and one cam with its keeper.

Door locks

TECHNICAL FEATURES

•

The stainless-steel push buttons retained in the locked position by two independent stainless-steel springs ensure safe locking.

•

Pre-drilled holes for safety padlock (not included in the package) to prevent accidental opening.

•

Handle features ergonomic design and non-slip grip.

•

Can be opened with one hand by pressing the release push button.

•

Provision for customs seals: handle and base feature suitable slots in compliance with TIR HANDBOOK (UNECE TIR CONVENTION, Geneve 1975 Annex 2) ready to accommodate customs wire and lead seals.

•

One of the bolts retaining the base and the keeper to the frame is protected to prevent tampering from the outside, so that no welding is required for compliance with customs regulations.

•

Corrosion strength: The GEOMET hours in accordance with UNI ISO 9227-93.

•

Packaging: carton box, one pair in each box.

spray

INSTALLATION Use 3 M 8 bolts to secure the base to the frame Use 2 M 8 bolts to secure the keeper to the frame Two marks facilitate drilling the holes for the pins to mount handle and swivel rod cam on the door. Welding is also possible. Any changes to the components of the locking device will automatically invalidate any manufacturer’s liability rights.

Use standard care and caution and follow these warnings:

• •

Provide adequate arrangements to prevent axial and radial movement of the swivel rod in the door, considering door size and design and the number of locking devices mounted on each door. Make sure to allow an adequate pull angle between handle and cam so as to ensure that the door can be closed properly, considering the type of swivel rod and door seals used and the number of locking devices mounted on each door.

REAR DOOR LOCK SL2 CODE

Version

071327344

Package

4340

Set of two locking devices composed of: 2 cams + 2 keepers + 2 levers + 2 bases with GEOMET treatment

Door locks

The push button, springs and bolt are in stainles steel

CODE

Version

071927139

Package

200

Door Holder Set for the Under Door Lock SL2

CODE

Version

Package

071924359

S.S.

100

Spirol pins mm. 5X30 30

Ã&#x2DC;5

REAR DOOR LOCK SLIM CODE

Version

071324718C

Package

5280

Set of two locking devices composed of: 2 cams + 2 keepers + 2 levers + 2 bases with GEOMET treatment

Door locks

The push buttons, springs and bolts are in stainless steel

CODE

Version

Package

075025299B

g. 240

Chromiting push button protection GEOMET

CODE

Version

Package

071924359

S.S.

100

Spirol pins mm. 5X30 30

Ã&#x2DC;5

Door locks

CATCH LOCKS

Door locks

Use standard care and caution and follow these warnings: •

During the assembly, check that distance between door and pillar allows the nib, when fully out, to go beyond the centre of the keeper roller by at least 3 mm.

•

When the door is closed, ensure that the nib is fully extended under the roller.

•

Do not close the door if locked, the key barrel might break.

LOCKS FOR REFRIGERATED VANS CODE

Version

Package

071625856

S.S.

1200

Lock without keeper for side doors, specially used in vans for delivering ice cream and frozen food products. When locked, the lever can be raised but does not come into contact with the nib.

CODE

Version

Package

071626904

S.S.

200

S.S. recessed catch with roll adjustable in height by screws and shims

CODE

Version

Package

071625858

S.S.

345

Flush mounted S.S. catch with roll not adjustable in height

Door locks

Lock without catch

LOCKS FOR REFRIGERATED VANS - SPARE PARTS CODE

Version

071922701A

Package

Door locks

Key barrel with cover device

CODE

Version

Package

071915479

S.S.

CODE

Version

Package

071921934

S.S.

Tongue

Spring

LOCKS FOR REFRIGERATED VANS CODE

Version

Package

071626109

S.S.

1190

Recessed lock complete with striker for side doors. When locked, the lever cannot be raised. The striker roll is height adjustable by means of screws and shims.

CODE

Version

Package

071626356

S.S.

188

S.S. recessed catch with roll adjustable in height by screws and shims

CODE

Version

Package

071927507

S.S.

Version

Package

Tongue

CODE 071926153 Key barrel with cover device

Door locks

Recessed lock with catch

Hinges

REAR DOOR HINGES

REAR DOOR HINGES Rear hinges are normally used on the rear doors of vehicles and must meet particular requirements in terms of strength, operation and appearance. Rear hinges are normally supplied disassembled: HINGE, BASE, PIN and NUT.

Hinge components – base, pin and nut – are identified by individual part numbers and are also available as a kit under one part number. Rear hinges permit 270-degree rotation so the rear door can swing open until resting near the vehicle side. All rear hinges incorporate integrated nylon bushings to ensure smooth pin rotation, whereas the pin is integral with the raised edges of the base.

BASE There are different base designs available: • flat base – secured to rear end only • angle base – secured to rear and side ends • welding base – for use on metal rear frames

pIN AND NUT The pin has a threaded end and a crowned head at the other end. A stop tab on the pin fits into a slot in the raised edge of the base to prevent pin rotation. Do not overtighten the nut or you might damage the bushing collar. Correct operation is ensured when the raised edges of the base contact the hinge bushings.

OTHER REAR HINGES The family includes two-knuckle hinges that are supplied assembled. This design ensures limited protrusion over the rear end or a nearly flush mount.

Use standard care and caution and follow these warnings: •

The pin nut must be at the bottom end.

•

Each door must be fitted with a number of hinges suitable for the load capacity of the vehicle.

•

For installation, use screws of adequate size for the mounting holes and with suitable strength to withstand the load.

•

Periodically ensure that fasteners are properly tightened.

Hinges

HINGE

REAR DOOR HINGES CODE

Version

Package

070120776A

S.S.

1090

070220777A

Z.PL.

1095

Rear door hinge BIG H=33

Hinges

Large-sized hinge. The reduced overhang of the neck (33 mm) makes this hinge suitable for recessing into rear profiles.for recessing into rear profiles.

CODE

Version

Package

070322207B

S.S.

250

Bracket to weld on with pin and nut

Bracket to weld. Can be used for radial body sides by turning 180Â°

CODE

Version

Package

070322210B

S.S.

345

Bracket to weld on with pin and nut

BRACKETS FOR REAR DOOR HINGES CODE

Version

Package

070326242

S.S.

390

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270Â°

CODE

Version

Package

070326343

S.S.

415

Inclined flat bracket with pin and nut

Used with radial body sides or for moving the fastening holes inward.

Hinges

Flat bracket with pin and nut

REAR DOOR HINGES CODE

Version

Package

070120783

S.S.

865

CODE

Version

Package

070326243

S.S.

360

Hinges

Rear door hinge MEDIUM

Flat bracket with pin and nut

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270Â°.

CODE

Version

Package

070326251

S.S.

380

Inclined flat bracket with pin and nut

Used with radial body sides or for moving the fastening holes inward.

CODE

Version

Package

070322631A

S.S.

315

Bracket to weld on with pin and nut

REAR DOOR HINGES CODE

Version

Package

070123707A

S.S.

1090

Rear door hinge BIG H= mm. 37,5

CODE

Version

Package

070324866

S.S.

370

S.S. bracket BIG, h=37,5 mm, to weld on Bracket to weld. Can be used for radial body sides by turning 180°.

CODE

Version

Package

070123716

S.S.

860

CODE

Version

Package

070326237

S.S.

370

Rear door hinge MEDIUM, height 37,5 mm

Flat bracket with pin and nut

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270°.

Hinges

Large-sized hinge with rotation center hight of 37.5 mm.

REAR DOOR HINGES CODE

Version

Package

070116966A

S.S.

655

070221827

Z.PL.

663

CODE

Version

Package

070322204B

S.S.

285

Hinges

Hinge

Flat bracket with pin and nut

The flat bracket should be mounted flush to the outside to allow hinge to rotate 270Â°

CODE

Version

Package

070322215A

S.S.

350

Angular bracket with pin and nut

The angular bracket can be securely fastened, but protrudes laterally by 12 mm.

REAR DOOR HINGES CODE

Version

Package

070122766D

S.S.

1065

Hinge specially designed for recessing into rear profiles, for all types of vans.

CODE

Version

Package

070322208A

S.S.

456

Version

Package

Flat bracket with pin and nut

CODE 070524525 Black PVC sealing

Hinges

Drawn hinge

REAR DOOR HINGES CODE

Version

Package

070116351A

S.S.

1453

070215127B

Z.PL.

1462

Assembled hinge complete with wide bracket

Hinges

Heavy-duty hinge with 5 mm thick plate. Comes mounted complete with bracket to weld, pin and nut. Very suitable for vans in sheet metal or refrigerated vans with rear metal panel.

CODE

Version

Package

070116074A

S.S.

1385

070215462B

Z.PL.

1375

Assembled hinge complete with narrow bracket Heavy-duty hinge with 5 mm thick plate. Comes mounted complete with bracket to weld, pin and nut. Very suitable for vans in sheet metal or refrigerated vans with rear metal panel.

CODE

Version

Package

070122685C

S.S.

1190

Double-jointed hinge, low profile with riveted pins

REAR DOOR HINGES CODE

Version

Package

070115766

S.S.

574

070200400

Z.PL.

580

CODE

Version

Package

070322203A

S.S.

251

070422217A

Z.PL.

257

Hinges

hinge

Flat bracket with pin and nut The flat bracket should be mounted flush to the outside to all hinge to rotate 270Â°.

CODE

Version

Package

070322977B

S.S.

203

070422690B

Z.PL.

200

Flat bracket to weld on with pin and nut

BRACKETS FOR REAR DOOR HINGES - SPARE PARTS CODE

Version

Package

070514509A

S.S.

CODE

Version

Package

070516283A

S.S.

COD.

Ver.

Conf.

gr.

070527368

S.S.

CODE

Version

Package

070515848

S.S.

CODE

Version

Package

070521111A

S.S.

Hinges

Pin 80 mm cuphead

Pin 90 mm cuphead

Pin 95 mm cuphead

Pin 115 mm cuphead

Pin 130 mm

BRACKETS FOR REAR DOOR HINGES - SPARE PARTS CODE

Version

Package

070514508A

S.S.

Version

Package

CODE 071915260 Nylon bush, black

CODE

Version

071916973A Nylon bush, black

COD.

Ver.

Conf.

gr.

071924546

071924547

Nylon busch

Hinges

Selflocking nut M10 antiscuff

RECESSED REAR DOOR HINGES CODE

Version

Package

070122152C

S.S.

1325

Recessed double-jointed hinge with riveted pins

Hinges

Double-jointed hinge with no rear overhang, since fixed part is fully recessed into the body side of the vehicle. Allows the movable part to pass through the seal by partially cutting it. Smooth rotation of the two pins and the absence of play between the

CODE

Version

Package

071923187

S.S.

CODE

Version

Package

070122153A

S.S.

Housing for recessed hinge, fixed part

Housing for recessed hinge, moving part

Hinges

SIDE HINGES

SIDE HINGES Side hinges are normally used on the side doors of vehicles. Side hinges are sold as an assembled kit (FIXED LEAF, PIVOTING LEAF and PIN) under one part number. Typically, they rotate through 180 degrees and ensure limited protrusion beyond the exterior of the vehicle.

Hinges

They come in two different versions: • with raised over-the-seal pivoting leaf • flat version for doors with inner seal PASTORE & LOMBARDI side hinges ensure perfectly smooth rotation thanks to IGLIDUR bushings. The construction of these bushings offers significant advantages: • low friction coeﬃcient • no play between the leaves • self-lubricated • smooth pivoting movement even after long periods of inactivity

OTHER SIDE HINGES The family includes a flush double-knuckle design to make use of the total width of the vehicle.

Use standard care and caution and follow these warnings: •

Determine the number of hinges to be used on each door according to the load capacity of the vehicle under construction.

•

For installation, use screws suitable for the mounting holes and the load capacity of the vehicle.

•

Periodically ensure that fasteners are correctly tightened.

•

Hinges with pin and grease nipple: grease at the time of installation and every two or three months afterwards.

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070825004A

S.S.

757

070923526A

Z.PL.

746

Hinge with 180° opening for heavy doors, very strong thanks to the deep ribs. Overleaping of the seal head with projection up to 8 mm. The perfect rotation and the complete absence of slack between fixed and movable part is ensured by IGLIDUR bushes. CODE

Version

Package

070822017A

S.S.

487

Hinge with seal bypass,

Hinge with 180° opening. Passing over of seal head with projection up to 9 mm. The smooth rotation. Of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

CODE

Version

Package

070822015A

S.S.

430

070922016A

Z.PL.

430

Hinge with seal bypass

Hinge with 180° opening. Passing over of seal head with project i o n u p to 9 m m . The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

Hinges

Side hinge

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070825055A

S.S.

423

Hinge with seal bypass

Hinges

Hinge with 180° opening. Passing over of seal head with project i o n u p to 3 m m . The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

CODE

Version

Package

070822013A

S.S.

430

070922014A

Z.PL.

428

Flat hinge

Flat hinge with 180° opening for internal seals.The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

CODE

Version

Package

070810489B

S.S.

230

070910490B

Z.PL.

230

Flat hinge for flaps

Flat hinge with 180° opening for internal seals.The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070822750B

S.S.

163

070922751B

Z.PL.

163

Hinge with 180째 opening, with IGLIDUR bushes. Specially used for small doors with external seal.

CODE

Version

Package

070822752B

S.S.

160

070922753B

Z.PL.

160

Flat hinge

Flat hinge with 180째 opening, with IGLIDUR bushes. Specially used for small doors with external seal.

CODE

Version

Package

070823235

S.S.

280

Hinge with countersunk holes

Hinge with 180째 opening, with IGLIDUR bushes

CODE

Version

Package

070820809A

S.S.

150

070920810A

Z.PL.

140

Hinge Hinge with 180째 opening

Hinges

hinge with seal bypass

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070821919A

S.S.

326

070921920A

Z.PL.

322

Flat hinge

Hinges

Flat hinge with 180° opening, fixed part with two holes, with IGLIDUR bushes

CODE

Version

Package

070821921A

S.S.

380

070921922A

Z.PL.

367

Flat hinge

Flat hinge with 180° opening, fixed part with three holes, with IGLIDUR bushes

CODE

Version

Package

070822043A

S.S.

520

Flat hinge

Flat hinge with 180° opening, fixed part with four holes, with IGLIDUR bushes

EXTERNAL SIDE DOOR HINGES CODE

Version

Package

070900277A

Z.PL.

361

Flat hinge, pin with lubricator, fixed part with two holes

Hinges

Flat hinge with 180° opening, fixed part with two holes

CODE

Version

Package

070912686A

Z.PL.

370

Flat hinge, pin with lubricator Flat Hinge with 180° openingm, fixed part with three holes

100

RECESSED SIDE DOOR HINGES CODE

Version

Package

070822309B

S.S.

1111

Double-jointed recessed hinge

Hinges

Recessed side hinge for isothermal doors with no external projection. The seal is not interrupted because of a slot which allows the hinge to pass through. The smooth rotation of the two pins and the absence of play between the fixed and movable parts is

CODE

Version

Package

070822154B

S.S.

150

Version

Package

210

Housings for recessed hinge

CODE 070823280A Housings for recessed hinge, black plastic

Plastic housings with brass bushes for the finishing of the formed opening.

101

RECESSED SIDE DOOR HINGES CODE

Version

Package

070824999A

S.S.

1070

Recessed side door hinges with riveted pins for isothermal doors with no external projection. The seal is not interrupted because of a slot which allows the hinge to pass through. The smooth rotation of the two pins and the absence of play between the fixed and movable parts is ensured by IGLIDUR bushes.

CODE

Version

Package

070825000A

S.S.

152

Housings for recessed hinge housings to insert into the formed opening

Hinges

Double-jointed recessed hinge

102

Hinges

CONTINUOUS POLIALL HINGES

103

CONTINUOUS POLIALL HINGES The POLIALL HINGES consist of a polyurethane profile enclosed between two lengths of aluminium section. Their typical applications are side and rear doors requiring a continuous hinge with very limited protrusion to prevent the ingress of water and dust. They can be installed using rivets or self- tapping screws.

Use standard care and caution and follow these warnings: •

Select a type of hinge suitable for the door weight and thickness.

•

Fasteners must be the adequate thickness, length and capacity for the load and stress involved in the application.

•

Fatigue and material strength tests at different temperatures available.

•

Periodically ensure that fasteners are properly tightened and check the polyurethane components for wear.

Hinges

The POLIALL hinges can be used on any type of door. However, they are mostly used in fully opening folding side doors and rear hatch doors with under door locking systems.

104

CONTINUOUS POLIALL HINGES CODE

Version

Package

020823495B

L=2400 mm

3645

020823496B

L=2700 mm

3870

020823497B

L=3000 mm

4050

020823498B

L=3200 mm

4450

020823499B

L=4000 mm

5600

Hinges

Continuous Poliall hinge H=29 mm

Self-colour anodized aluminium and black polyurethan h=29 mm. The relief of the polyurethane profile has to be placed into the slot of the aluminium profiles to obtain a better coupling. Package g.

CODE

Version

020825684

L=2400 mm

2760

020825685

L=2700 mm

3070

020826729

L=3200 mm

3950

020825686

L=4000 mm

4500

Continuous Poliall hinge H=24 mm

Natural anodized aluminium and black polyuretan h=24 mm. ideal for fizing with wide-ead rivets

CODE

Version

Package

020821095

L=3000 mm

4440

Continuous Poliall hinge H=28 mm with opening 270Â°

Self-colour anodized aluminium and black polyurethan, without fixing holes, h=28 mm.

105

CONTINUOUS HINGES CODE

Version

081317202

Package

4255

Continuous hinge in natural coloured anodized aluminium, 30 x 24 mm,

CODE

Version

081400453A

Package

1240

Rubber insert, black, 20 m roll

CODE

Version

Package

020815872

Pin Ø6

1800

020815913

Pin Ø4

1400

S.S.Contiunuous hinges without holes 40X1,5X1980

Ø4-6

40X1,5X1980 PIN Ø 6

CODE

Version

Package

020815873

Pin Ø6

2750

S.S.Continuous hinges withouth holes 60X2X1980 60X2X1980 PIN Ø 6

Hinges

Continuous self-colour anodized aluminium hinge in 4 m. bars without holes

106

ALUMINIUM HINGES CODE

Version

020801435

Package

150

Package

160

Hinges

Hinge in bright aluminum with brass bushings

CODE 020815680 Hinge in black anodized aluminum

Version

107

OTHER HINGES CODE

Version

030817767

Package

Plastic hinge, complete with bush and rubber seal

CODE

Version

030825635

Package

Hinge in polimer Perno/pin/Bolzen Ø3

39,5

8,3

H inge in high impact strength special techno polymer (on polyamide base) in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 220°

38,5

CODE

Version

030825643

Package

Hinge in polimer 70x51 23,5

19,5

Hinge in special techno polymer hardened with glass fibre, in black colour. Nickelplated carbonitritinghardened stainless steel rotation pin. The rotation stud pin, fully inserted into the hinge body, cannot be extracted. Rotation angle: max 270°

CODE

Version

030825646

Package

Hinge techno polimer 27

72,5

48,2

20,

H inge in high impact strength special techno polymer in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 210°

Hinges

rotation angle 175°

108

OTHER HINGES CODE

Version

030825641

Package

Hinge in polimer 50x50 Perno/pin/Bolzen Ø5

CODE

Version

030825642

Package

Hinge in polimer 50x50 Perno/pin/Bolzen Ø5

Hinges

12,5

H inge in high impact strength special techno polymer hardened with glass fibre, in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 270°

CODE

Version

030827458

Package

Hinge with adjustable friction in polimer 80x63 with through holes Provided with screw with the possibility to adjust the resistant torque of the door on which it is assembled, Special technopolymer (on polyamide based) reinforced with glass fibers, rotation pin and nut in stainless steel AISI 304, maximum angle of rotation 180°.

CODE

Version

030827459

Package

Hinge with adjustable friction in polimer 80x63 with studs Provided with screw with the possibility to adjust the resistant torque of the door on which it is assembled, Special technopolymer (on polyamide based) reinforced with glass fibers, rotation pin and nut in stainless steel AISI 304, maximum angle of rotation 180°.

109

Door retainers

DOOR RETAINERS

110

DOOR RETAINERS Door checks keep the door open when it is resting on the side of the van and come in two basic designs:

Door retainers

• •

a two-piece design with a male element mounted on the door and the female element installed to the wall. a one-piece design mounted under the frame.

Use standard care and caution and follow these warnings: •

Door checks are designed to keep the doors open when the vehicle is stopped and parked on level ground.

•

Never move the vehicles with the doors open.

•

For under chassis version, ensure that the arm is into the stop hole when stopped, and when closing follow the arm by keeping it firmly through its handgrip.

•

For two-piece design, ensure that the male part is firmly engaged into the female slot.

111

UNDER CHASSIS DOOR RETAINERS CODE

Version

072327266

Package

1850

Door retainers

Covered under chassis door retainer in anodized aluminium arm in s.s.handle in rubber EPDM

CODE

Version

Package

072325051

S.S.

157

Kit s.s. fixing brackets for covered under chassis door retainer including 2 brckets 4 screws 4 washers

112

UNDER CHASSIS DOOR RETAINERS CODE

Version

Package

072325816

S.S.

1810

072325817

Z.PL.

1936

CODE

Version

Package

072325821

S.S.

1810

CODE

Version

Package

072325818

Z.PL.

2010

Door retainers

Door retainer

Door retainer with s.s. spring

Door retainer with bezinal protected spring

113

LATERAL DOOR RETAINERS CODE

Version

Package

072320382

L=103 mm

120

072320381

L=123 mm

123

072323683

L=143 mm

130

CODE

Version

Package

072320865

S.S.

Door retainers

Complete door retainer, male part in polyurethane

Plate for female part of door retainer Plate for female part of door holder The plaquĂ¨s central hole is required for customs control

CODE

Version

Package

072324765

S.S.

S.S. plate for polyurethan door retainer

114

LATERAL DOOR RETAINERS CODE

Version

Package

072310944

S.S.

072310946

Z.PL.

Door retainers

Door retainer, male part 104 mm Male part of door stay with return spring

CODE

Version

Package

072310945

S.S.

072310947

Z.PL.

Door retainer, male part 122 mm Male part of door stay with return spring

CODE

Version

Package

072322748

S.S.

072322749

Z.PL.

Version

Package

Door retainer, female part

CODE 072312524 Black PVC protection plate for door retainer male part

CODE

Version

072312525 Black PVC protection plate for door retainer female part

The central hole is required for customs control

115

LATERAL DOOR RETAINERS CODE

Version

Package

072301449

S.S.

195

Door retainer with automatic close: to use, raise the lever of the male part which will automatically be inserted into the female part upon the contact of the two parts. CODE

Version

Package

072319804

S.S.

114

CODE

Version

Package

072326695

S.S.

Automatic door retainer, male part

Automatic door retainer, female part

Door retainers

Automatic door retainer

116

Door retainers

LATERAL DOOR RETAINERS CODE

Version

Package

072301288

L=30 mm

072301292

L=40 mm

072301290

L=50 mm

072301291

L=60 mm

072301289

L=80 mm

Version

Package

Nickel-plated brass pin

CODE 072301296 Shiny aluminum seal holder

CODE 072301295A Rubber female part

Version

117

LATERAL DOOR RETAINERS CODE

Version

072301333

Package

CODE

Version

072301332 Shiny aluminum seal holder

CODE

Version

072301331A Rubber female part

CODE

Version

072301080 Complete rubber door retainer with plastic pin

CODE 072312898 Complete white nylon door retainer

Version

Door retainers

Nickel-plated brass pin 16 mm

Interior system for trucks 118

MEAT TRANSPORT

119

Meat transportation systems are made up of a set of components for hanging and handling meat inside isolated vans. There are two different systems: - guide rails and hook with nylon washer - tubular rails and Euro-hook In both systems, components are anchored to the roof and suitable provisions must be made to ensure the roof will withstand the load. For the guide rail system, the aluminium curve determines the distance between two rails. For the tubolar rail system, vehicle width must be divided into equal sections depending on the number of tubular rails to be installed.

Use standard care and caution and follow these warnings: When dimensioning a meat transportation system, all vehicle-related variables should be taken into account: frame torsion, insulated body torsion, roof load capacity, type of cargo and transport conditions, running conditions. It is the vehicle’s manufacturer who should select the components, their number, mounting configuration and fastening systems based on vehicle design specifications. At customer’s request, Pastore & Lombardi can test the application after prior feasibility evaluation. ARTICULATED HOOKS •

only center line per hook is allowed

BRACKETS • •

alternate a pair of brackets with chains with a pair of brackets without chain when using the means, remember to connect chains for even load distribution. failure to connect all chains will lead to load mass-ups against the connected chains, which might break or cause loosening of bracket fasteners.

RAILS • trim rails at connection points to avoid wear to hook washers. • ubricate rails with products authorized by Veterinary Medicine Body for improved sliding properties. ALUMINIUM TUBE WITH EURO-HOOKS • always install support hook stop for load distribution. • ailure to install hook stops will lead to load mass-ups against the installed stops, which might break or cause loosening of bracket fasteners. • lubricate tubes with products authorized by Veterinary Medicine Body for improved sliding properties.

Interior system for trucks

MEAT TRANSPORT

120

Interior system for trucks

MEAT TRANSPORT RAIL SYSTEM CODE

Version

Package

072520741B

S.S.

402

Articulated meat hook conforms to DIN 5047

CODE

Version

Package

072520702C

S.S.

230

Meat hook conforms to DIN 5047

121

CODE

Version

Package

072520416B

S.S.

361

CODE

Version

Package

072519001B

S.S.

270

Version

Package

670

Set of 2 rack fixing brackets with chain for hook stop

Set of 2 rack fixing brackets withouth chain

CODE 072515902. Shiny aluminium bend r=48

CODE

Version

Package

072527461

L=3000 mm

6630

072515899

L=6000 mm

13250

072519456

L=7000 mm

15560

Anodized aluminum guide rack

Interior system for trucks

MEAT TRANSPORT RAIL SYSTEM

122

CODE

Version

Package

072518972

S.S.

1350

Hook in stainless steel 316, support in zinc-plated steel EUROHOOK, conforms to DIN 5047

CODE

Version

072622298

Package

1295

Package

16000

Package

375

Anodized aluminum tube support with stainless steel hook stop with pin 153 85

105

Ø11

Interior system for trucks

MEAT TRANSPORT TUBOLAR SYSTEM

Ø8,5 50

CODE

Version

072621709 Anodized aluminium tube, 7 m

CODE 072621710

Version

Raw aluminum insert mm. 200

Unfinished aluminum tube for tube rack jointing.The jointing of two tube racks should be carried out in correspondence with a tube support.

123

CODE

Version

072621706

Package

760

Package

610

Package

290

Anodized aluminum rear cap with slipaway stainless steel pin

CODE

Version

072621733 Anodized aluminum rear cap with fixed stainless steel pin

CODE

Version

072621711 Anodized aluminum front cap

Ø54

Ø38

M10

Ø80

Ø49

Interior system for trucks

MEAT TRANSPORT TUBOLAR SYSTEM

124

MEAT TRANSPORT TUBOLAR SYSTEM CODE

Version

Interior system for trucks

072622299

Package

11500

Hook stop profile in anodized aluminium, 7 m

Anodized aluminum hook stop profile. To recess under support to prevent the loaded hook from slipping out. CODE

Version

072626131

Package

942

Hook stop profile in anodized aluminium, 1 m Anodized aluminum profile to be fitted under brackets to avoid unloaded hooks slipping out. The profile is mounted where unused hooks are deposited.

CODE

Version

072622158B

Package

5200

Winch with handle for tube guide system

The winch stretches a cable, where the unused hooks are deposited.

CODE 072622420 Spare handle for winch

Version

Package

1240

125

CODE

Version

Package

071919206A

S.S.

370

Tube support for side walls

Hook unit support to mount onto side walls of meat transport vans for hanging light loads or depositing unused hooks.

CODE

Version

Package

071921058

S.S.

4458

071911463

Z.PL.

4450

Version

Package

STEEL TUBE, 3000X27X2,5 MM

CODE 071920120 PVC end cap

Cap for sealing the ends of the tube.

Interior system for trucks

SIDE WALL MEAT TRANSPORTATION

Interior system for trucks 126

INNER MOVABLE WALL

127

- Locking and sliding of the lifting arm guaranteed with one cam and one single pin. - Automatic lock with vertical wall - Automatic lock with horizontal wall - Free sliding with wall inclination between 30°an d 60° - Easier mounting of rail and rack because the lifting arms are supplied without gas springs - Possibility to choose the gas springs between 100-150-200-250 kg power - Quick and easy mounting and replacing of the gas springs - Possibility to choose between MANUAL and AUTOMATIC anchor system with lifted wall - Material: pickled and passivated stainless steel AISI 304

Use standard care and caution and follow these warnings: •

To be fitted with gas springs of only one power value.

•

Always mount additional blocking systems (lateral or centred type) to be used with wall in vertical position.

•

Install a suitable setscrew onto the rails to avoid sliding out of supports.

•

With the panel in horizontal position , ensure that the brake trolley is in a proper position to support the wall.

Interior system for trucks

INNER MOVABLE WALL

128

CODE

Version

Package

072424591H

S.S.

11800

152

124

Set of lifting arms system

94 114 134

168

526

559

CODE

Version

Package

072425893D

S.S.

16000

124

Set of high power lifting arms system

152 1

Ø1

526 94 114 134 168

Interior system for trucks

LIFTING ARMS SYSTEM WITH RAIL AND RACK

559

129

CODE

Version

Package

072426611

S.S.

363

CODE

Version

Package

085025188B

Kg 100

640

082524323B

Kg 150

640

082523999C

Kg 200

640

082526278B

Kg 250

650

CODE

Version

Package

082527624

Kg 200

640

082527625

Kg 250

650

set of S.S. sets for release inner wall in upright position

Gas springs

Gas springs with shaft in S.S. AISI 304

Interior system for trucks

LIFTING ARMS SYSTEM WITH RAIL AND RACK

130

LIFTING ARMS SYSTEM WITH RAIL AND RACK CODE

Version

Interior system for trucks

072426802A

Package

250

Kit gas spring end piece

CODE

Version

Package

072426727

L=4000 mm

9220

072423281

L=7000 mm

16150

CODE

Version

Package

072423282B

S.S.

1750

Anodyzed Aluminium rail

S.S. rack AISI 304 - Bars to m. 3,50

131

CODE

Version

072424602C

Package

1020

Keeper bar

CODE

Version

Package

072424601D

S.S.

570

CODE

Version

Package

072424176G

S.S.

1900

CODE

Version

Package

072424559A

S.S.

CODE

Version

Package

072421585D

L=2800 mm

2005

S.S. plate with zinc plated latch

Stainless steel AISI 304 brake trolley

Keeper

PVC profile for inner wall, grey mm 47

Interior system for trucks

LIFTING ARMS SYSTEM WITH RAIL AND RACK

132

Interior system for trucks

LIFTING ARMS SYSTEM WITH RAIL AND RACK CODE

Version

Package

072426552C

S.S.

4000

CODE

Version

Package

072426551B

S.S.

3800

Version

Package

3000

Kit of wall blocking device in vertical position

CODE 035519332 Cargo restraint profile in anodized aluminum,

length 3 m.

CODE

Version

Package

072425674B

S.S.

1030

Side blocking device for inside wall

133

LIFTERS FOR INNER WALL CODE

Version

Package

072426569E

S.S.

13360

CODE

Version

Package

072426570B

S.S.

15740

Interior system for trucks

Set of low-profile lifting arms system

Set of low-profile lifting arms system with recessed rails

134

Interior system for trucks

LIFTERS FOR INNER WALL CODE

Version

Package

085025188B

Kg 100

640

082524323B

Kg 150

640

082523999C

Kg 200

640

082526278B

Kg 250

650

CODE

Version

Package

082527624

Kg 200

640

082527625

Kg 250

650

Version

Package

250

Gas springs

Gas springs with shaft in S.S. AISI 304

CODE 072426802A Kit gas spring end piece

CODE

Version

Package

072527461

L=3000 mm

6630

072515899

L=6000 mm

13250

072519456

L=7000 mm

15560

Anodized aluminum guide rack

135

CODE

Version

Package

072424601D

S.S.

570

Version

Package

1140

Package

1300

S.S. plate with zinc plated latch

CODE 072426571 Keeper bar for lifter arm low profile

CODE

Version

072426572 Keeper bar for lifter arm with recessed rail

CODE

Version

Package

072421585D

L=2800 mm

2005

PVC profile for inner wall, grey mm 47

Interior system for trucks

LIFTERS FOR INNER WALL

136

Interior system for trucks

LIFTERS FOR INNER WALL CODE

Version

Package

072426552C

S.S.

4000

CODE

Version

Package

072426551B

S.S.

3800

Version

Package

3000

Kit of wall blocking device in vertical position

CODE 035519332 Cargo restraint profile in anodized aluminum,

length 3 m.

CODE

Version

Package

072425674B

S.S.

1030

Side blocking device for inside wall

137

CODE

Version

Package

072425624C

S.S.

1750

Set of S.S. brackets for light lifting wall FITTING WITH MEAT TRANSPORT RAIL SYSTEM

CODE

Version

Package

072426661

S.S.

630

CODE

Version

Package

072424559A

S.S.

CODE

Version

Package

072425674B

S.S.

1030

CODE

Version

Package

072527461

L=3000 mm

6630

072515899

L=6000 mm

13250

072519456

L=7000 mm

15560

S.S. manual blocking trolley for inner wall

Keeper

Side blocking device for inside wall

Anodized aluminum guide rack

Interior system for trucks

LIFTER ARMS FOR LIGHT LIFTING WALL

138

CARGO RESTRAINT SYSTEMS CODE

Version

Interior system for trucks

035519332

Package

3000

Cargo restraint profile in anodized aluminum, length 3 m.

CODE

Version

Package

035517576

Z.PL.

2900

CODE

Version

Package

035521236A

Z.PL.

6500

Package

100

Cargo restraint profile in zinc-plated steel, length 3 m.

Horizontal grooved profile in white zinc-plated steel, length 3,06 m.

CODE 035520031A Black plastic endpiece

Version

139

CODE

Version

Package

035521469

Z.PL.

4600

Vertical cargo restraint bar in zinc-plated steel for loading platforms, through pin, welded externally, length 2 m.

CODE

Version

Package

035525393

Z.PL.

7530

CODE

Version

Package

035526389

Z.PL.

8150

Round cargo m. 1,89-3,00

Round cargo restraint bar in z.pl. steel, from 2085 mm to 2485 mm with pin Ã&#x2DC; 24

Interior system for trucks

CARGO RESTRAINT SYSTEMS

140

CLOTHING TRANSPORT SYSTEM CODE

Version

Interior system for trucks

035515800A

Package

5200

Package

180

Clothing rack profile in zinc-plated steel, length 3 m., with drawn hole

CODE 035516148 set heads and 2 pins

Version

141

Interior system for trucks

SYSTEM FOR SLIDING DOOR

•

System realized with a telescopic guide, with hardened tracks and steel balls for bearings

•

High reliability of the sliding system in the long term

•

Reduced dimensions inside the vehicle

•

Quick assembly and easy use

•

The dimensions are based on a door 900 mm wide, with maximum thickness 85 mm, maximum weight 100 kg

•

Designed for doors sliding from the right to the left and from the left to the right

142

SYSTEM FOR SLIDING DOOR CODE

Interior system for trucks

072426618A Set sliding door

Version

Package

13600

143

Interior system for trucks

FOLDING SHELF

• • • • • • • • •

Pastore & Lombardi folding shelf in stainless steel is simple to assemble and gives extreme flexibility of use. Effective cleaning is possible to ensure a good hygiene. Varied dimensions of modules allow to obtain the required length of the shelf. Folding of the planes is very simple thanks to the support arms that rotate up to 90 degrees. In vertical position the shelf occupies a reduced space. The distance between shelves is adjustable for every necessity, with a minimum stroke of 100 mm. For the shelves not requiring vertical adjustment, a 110 mm pillar is sufficient. For the shelves assembled to the wall by glueing a 2 mt high aluminium pillar is available. A special shim in the ends of the shelves ensures the stability and containing of the load. The edges of the system are protected by rubber inserts.

144

Interior system for trucks

FOLDING SHELF MODULE 1000x500 CODE

Version

Package

072727429

S.S.

1070

CODE

Version

Package

072727437

S.S.

1050

CODE

Version

Package

072726348B

S.S.

1200

Supporting arm

Central horizontal element

Vertical pillar with pin

145

CODE

Version

Package

072727436

S.S.

1435

CODE

Version

Package

072727435

S.S.

1455

CODE

Version

Package

072727433

S.S.

125

CODE

Version

Package

072727431

S.S.

305

Rear element

Front element

Shim

Fixing angle bar

Interior system for trucks

FOLDING SHELF MODULE 1000x500

146

FOLDING SHELF MODULE 1000x500 CODE

Version

Package

Square black cap

Interior system for trucks

072727544

CODE

Version

072726489 Protection black angular

CODE

Version

Package

072726728

5000

CODE

Version

Package

072726382A

S.S.

300

Aluminium pillar with bushes

Fixing angle bar 110

37.5

38 59

147

CODE

Version

Package

072727430

S.S.

920

CODE

Version

Package

072727437

S.S.

1050

CODE

Version

Package

072726348B

S.S.

1200

Supporting arm

Central horizontal element

Vertical pillar with pin

Interior system for trucks

FOLDING SHELF MODULE 1000x420

148

Interior system for trucks

FOLDING SHELF MODULE 1000x420 CODE

Version

Package

072727436

S.S.

1435

CODE

Version

Package

072727435

S.S.

1455

CODE

Version

Package

072727434

S.S.

100

CODE

Version

Package

072727432

S.S.

240

Rear element

Front element

Shim

Fixing angle bar

149

CODE

Version

072727544

Package

Square black cap

25 30

CODE

Version

072726489 Protection black angular

CODE

Version

Package

072726728

5000

CODE

Version

Package

072726382A

S.S.

300

Aluminium pillar with bushes

Fixing angle bar 110

37.5

38 59

Interior system for trucks

FOLDING SHELF MODULE 1000x420

150

Ventilation

151

ELECTRIC AERATORS 12-24 V CE CODE

Version

Package

083426156C

12V

5800

083426157B

24V

5800

Version

Package

1536

Package

745

Ventilation

Complete aerator black - CE

CODE 083426154 External air intake in black cataphoresis

CODE 083426155 Support for external air intake in black cataphoresis

Version

152

SPARE PARTS FOR ELECTRIC AERATORS 12-24 V CODE

Version

083402509A

Package

345

Package

Ventilation

Connection ring, black cataphoresis

CODE

Version

083400475 Air filter

CODE

Version

Package

083426662C

12V

2290

083426663C

24V

2290

Engine unit complete with filter

153

SPARE PARTS FOR ELECTRIC AERATORS 12-24 V CODE

Version

083423367

Package

133

Package

Ventilation

Protection plate, black aluminium

CODE

Version

083400476 Rotation reverser

CODE 083400478 3 speeds switch

Version

154

VENTILATION HATCHES FOR ISOTHERMAL VEHICLES CODE

Version

071020152C

Package

2115

Ventilation hatch mm 110x335x55

Ventilation

Ve n t i l a t i o n h a t c h 110x335x55 mm, white painted, with s.s. lateral external handle and 2 s.s. hinges, without latch. To complete the ventilation hatch, remember to order latch

CODE

Version

071021923B

Package

1955

Ventilation hatch mm 110x335x75 Hatch 110x335x75 mm, white painted with s.s. external handle and s.s. hinge, without latch. To complete the ventilation hatch, remember to order latch

CODE 071019198C

Version

Package

2500

Ventilation hatch mm 170x335x75 Ve n t i l a t i o n h a t c h 170x335x75 mm, white painted, with s.s. external handle and 2 s.s. hinges, without latch. To complete the ventilation hatch, remember to order latch

155

VENTILATION HATCHES FOR ISOTHERMAL VEHICLES CODE

Version

075027225

Package

2410

Ve n t i l a t i o n h a t c h 100x335x50 mm, white painted, with s.s. external handle and 1 s.s. hinge, without latch. To complete the ventilation hatch, remember to order latch

CODE

Version

071020355A

Package

Black plastic latch for external handle

CODE 071921805

Version

Spring catch nickel-plated for pins Ã&#x2DC; 12

Ventilation

Ventilation hatch mm 100x335x50

156

VENTILATION HATCHES FOR ISOTHERMAL VEHICLES - SPARES CODE

Version

072026354A

Package

326

Package

330

Package

380

Ventilation

Pressed rubber seal for ventilation hatch 100x335 mm

CODE

Version

072021545B Pressed rubber seal for ventilation hatch 110x335 mm

110

335

CODE

Version

072021544B Pressed rubber seal for ventilation hatch 170x335 mm

170

335

157

S CODE

Version

Package

030520752

S.S.

360

External handle for ventilation hatch with covered handle

Ventilation

Stainless steel handle suitable for ventilation doors with external seal.

CODE

Version

Package

070822750B

S.S.

163

070922751B

Z.PL.

163

hinge with seal bypass

Hinge with 180Â° opening, with IGLIDUR bushes. Specially used for small doors with external seal.

CODE

Version

Package

070822015A

S.S.

430

070922016A

Z.PL.

430

hinge with seal bypass

Hinge with 180Â° opening. Passing over of seal head with project i o n u p to 9 m m . The smooth rotation of the two pins and the absence of play between the fixed and movable parts is achieved by the insertion of IGLIDUR bushes.

158

AERATION GRILLS CODE

Version

Package

071019290

S.S.

3100

CODE

Version

Package

075026322A

S.S.

520

CODE

Version

Package

083425942A

S.S.

Ventilation

Aeration grill

S.S. grill with adjustment knob

1150

159

AERATION GRILLS CODE

Version

071020935A

Package

360

Aeration grill, raw aluminium

CODE 071021893

Version

Package

495

Aeration grill, raw aluminium 260x440 mm - slots 50x8 mm

Ventilation

190x440 mm - slots 50x8 mm

160

FILLER FLAPS CODE

Version

Package

024123667A

S.S.

524

024117267C

Z.PL.

630

Ventilation

Pre-galvanized steel sheet filler flap with S.S. spring, without key, rounded frame corners, 245x190 mm

CODE

Version

Package

024121322C

Z.PL.

960

Pre-galvanized steel sheet filler flap with S.S. spring, without key, rounded frame corners, 296x258 mm

CODE

Version

Package

024120253E

Z.PL.

665

Pre-galvanized steel sheet filler flap with S.S. spring, with key, rounded frame corners, 245x190 mm

161

FILLER FLAPS CODE

Version

082821607A

Package

500

Ventilation

Spare buffer for filler flap

CODE

Version

Package

071926209

S.S.

Version

Package

Spare tongue

CODE 071926175 Spare key barrel

162

HANDLES FOR WINDOWS CODE

Version

Package

037317551

285

037317552

285

Ventilation

Push-button swivel window lock , black

163

Lights

CEILING LIGHTS

164

CEILING LIGHTS Roof lights are used for the interior lighting of vehicles and come in recessed or surface-mounted configurations.

Lights

Ideal for insulated vans, as they withstand normal wash-down duty without damage to internal wiring connections.

Use standard care and caution and follow these warnings: •

Use type-approved cables with adequate cross-section area.

•

Ensure that roof light rating matches the realized system.

•

For all types of lights: never use bulbs exceeding the rating indicated on the item, as they would generate a greater amount of heat which might damage lens, connections or the whole system.

165

CEILING LIGHTS CODE

Version

Package

038627012A

12V

300

038627013A

12V

300

038627014A

24V

300

038627015A

24V

300

CODE

Version

Package

038627149

12V

450

038627148

24V

450

CODE

Version

Package

038617455A

12V

630

Lights

Recessed ceiling light

Recessed - 6 LED

Recessed ceiling light - 300x100x38 mm Recessed plastic ceiling light with 3x15 W - torpedo bulbs.

166

CEILING LIGHTS - SPARE PARTS CODE

Version

038624184

Package

Lights

Screen for ceiling light

CODE 038625438 Black screw for ceiling lights

Version

167

Under-chassis components

168

CODE

Version

Package

035625978

S.S.

5880

Decorated S.S.AISI box - 18,5 litre-tap with outlet Ø 1 1/4 300

250

0 25

CODE

Version

Package

035625979

S.S.

9800

Package

960

Decorated S.S.AISI box - 35 litre-tap with outlet Ø 1 1/4 400

30 300

CODE

Version

035623535 GRP box with tap, inner Ø outlet 23,5 mm 395

100

Under-chassis components

DRAINING BOXES

169

CODE

Version

035317541

Package

100

Package

100

106

Package

200

Lightweight pressed steel rope hook

CODE

Version

035318534 Heavy pressed steel rope hook

CODE 035410999A Aluminium hook for tarpaulin

Version

Under-chassis components

ROPE HOOKS

170

MUDGUARDS CODE

Version

Under-chassis components

033721187

Package

4950

Package

3700

Package

3300

Package

3100

Black plastic 670X1340 mudguard polyethylene with white edge

CODE

Version

033721190 Black plastic 595X1100 mudguard polyethylene with white edge

CODE

Version

033721191 Black plastic 550X1100 mudguard polyethylene with white edge

CODE

Version

033721192 Black plastic 500X1000 mudguard polyethylene with white edge

171

CODE

Version

033721193

Package

3500

Package

2740

Package

1100

Package

3000

Black plastic 430X650 mudguard polyethylene with white edge

CODE

Version

033721194 Black plastic 450X840 mudguard polyethylene with white edge

CODE

Version

033721195 Black plastic 240X840 mudguard polyethylene with white edge

CODE

Version

033721481 Black plastic 430X1300 mudguard polyethylene with white edge

Under-chassis components

MUDGUARDS

172

Under-chassis components

LADDERS AND STEPS CODE

Version

Package

034722710B

Z.PL.

14300

CODE

Version

Package

034711231A

Z.PL.

1200

CODE

Version

Package

034711232A

Z.PL.

1550

CODE

Version

Package

034722281

7 MICRON

1210

035023318

15 MICRON

1210

EUROTRUCK folding ladder hot galvanized

Z.pl. step H= 250 mm

Z.pl. step H= 360 mm

Zinc plated steel step standards VBG 12

173

CODE

Version

Package

035315991B

Z.PL.

939

Casted steel fixing bracket

Heavy body clamp, thickness 12 mm.

CODE

Version

Package

035316080

Z.PL.

Z.pl. shim 2 mm Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035318985A

Z.PL.

116

Z.pl. shim 4 mm Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035320686B

Z.PL.

658

Casted steel fixing bracket

Under-chassis components

BOX FIXING BRACKETS

174

Under-chassis components

BOX FIXING BRACKETS CODE

Version

Package

035321301B

Z.PL.

641

Casted steel fixing bracket

Light clamp for body fixing, thickness 12 mm.

CODE

Version

Package

035321513A

Z.PL.

Shim 2 mm for support 035321301B Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035323020A

Z.PL.

100

Shim mm. 4 per art 035321301B Plate, to adapt the body-clamp for different sized frames.

CODE

Version

Package

035325270

Z.PL.

600

Fixing bracket

175

CODE

Version

035314494B

Package

282

Body mounting bracket S 235 J2 EN 10025 (Fe 360 B)

CODE

Version

035319522B

Package

435

Body mounting bracket, thickness 6 mm S 235 J2 EN 10025 (Fe 360 B)

CODE

Version

035302484B

Package

370

Big body mounting bracket S 355 MC EN 10149 (Fe E 355)

CODE 035315473B

Version

Package

530

Body mounting bracket S 355 MC EN 10149 (Fe E 355)

Under-chassis components

BODY MOUNTING BRACKETS

Rubber and aluminium profiles 176

177

CODE

Version

081607547C

L=50000mm 1

Package

g. 6990

Joint cover guisnap, black, with metal insert for max. 4 mm thickness

CODE

Version

081613369

L=25000mm 1

Package

g. 6500

Guisnap 16 mm pipe for max. 5 mm thickness

CODE

Version

081614121D

L=50000mm 1

Package

g. 6800

Guisnap, tubolar part 11 mm for max. 3 mm thickness

Rubber and aluminium profiles

GUISNAP

178

Rubber and aluminium profiles

GUISNAP CODE

Version

081621989C

L=50000mm 1

Package

g. 9080

Guisnap, tubolar part 15 mm for max. 4 mm thickness

CODE

Version

081621990C

L=50000mm 1

Package

g. 10600

Guisnap with tongue, tubolar part 14 mm for max. 3 mm thickness

CODE

Version

081621992C

L=50000mm 1

Package

g. 10000

Guisnap, tubolar part 18 mm for max. 3 mm thickness

179

CODE

Version

Package

072027103

L=3000 mm

1100

CODE

Version

Package

072027104

L=3000 mm

950

CODE

Version

Package

072027358

L=2700 mm

1250

CODE

Version

Package

072027219

L=2700 mm

1200

072027220

L=3000 mm

1200

PVC profile, grey, 20 mm

PVC profile, grey, 25 mm

PVC profile, grey, 27 mm

PVC profile, grey, 30 mm

Rubber and aluminium profiles

DUAL HARDNESS PVC SEALS

180

Rubber and aluminium profiles

DUAL HARDNESS PVC SEALS CODE

Version

Package

072022021C

L=2700 mm

1300

CODE

Version

Package

072027559

L=2700 mm

1300

CODE

Version

Package

072025591

L=3000 mm

1650

CODE

Version

Package

072421585D

L=2800 mm

2005

PVC profile grey 35 mm

PVC profile, grey mm.40.5

PVC profile, grey mm.44

PVC profile for inner wall, grey mm 47

181

CODE

Version

Package

072021425C

L=2700 mm

1700

CODE

Version

Package

072021426C

L=2700 mm

2050

CODE

Version

Package

072021451A

BLACK

072022343

GREY

PVC profile, grey, mm.55

PVC profile, grey, 85 mm

PVC joint for angular connections on dual hardness profiles

Rubber and aluminium profiles

DUAL HARDNESS PVC SEALS

182

Rubber and aluminium profiles

RUBBER PROFILES AND OTHER PROFILES CODE

Version

Package

081409327A

L=2400 mm

620

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

Package

081217079A

Z.PL.

600

CODE

Version

Package

081409292A

L=25000mm 1

Zinc-plated profile, for art. 081409327A- bars2,5 m

2180

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

081409387A

L=25000mm 1

Package

g. 16000

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

081414337C

L=50000mm 1

Package

g. 6100

EPDM rubber profile, 9x14 mm TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

183

CODE

Version

081409533B

L=25000mm 1

Package

g. 11100

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

081409471A

L=20000mm 1

Package

g. 780

CODE

Version

081409503C

L=25000mm 1

Rubber tightener

Package

9000

EPDM rubber profile TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

081409504B

L=50000mm 1

Rubber tightener

Package

g. 2500

Rubber and aluminium profiles

WINDOW SEALS

184

Rubber and aluminium profiles

DOOR SEALS CODE

Version

072014003A

L=20000mm 1

Package

g. 11100

Rubber profile, 1 tongue TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

072009462B

L=10000mm 1

Package

g. 7000

072016554B

L=2500 mm

1500

072016746B

L=4200 mm

2827

Rubber profile, 2 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

072020670

L=10000mm 1

Package

g. 4800

Rubber profile, 3 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

072010310B

L=10000mm 1

Package

9400

072016555C

L=2800 mm

2700

Rubber profile, 3 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

185

CODE

Version

072022617B

L=13000mm 1

Package

g. 10000

Rubber profile, 3 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

072020669

L=13000mm 1

Package

g. 8500

Rubber profile, 4 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

072022618B

L=13000mm 1

Package

g. 11400

Rubber profile, 4 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

CODE

Version

072023872

L=13000mm 1

Package

g. 7550

Rubber profile, 3 tongues TOLERANCES ACCORDING TO STANDARDS UNI ISO 3302 CLASS E 2L2

Rubber and aluminium profiles

DOOR SEALS

186

Rubber and aluminium profiles

DOOR SEALS CODE

Version

Package

081327481

L=3000 mm

220

Seal fastening profile distance between hole centres 130 mm.

CODE

Version

Package

081327482

L=3000 mm

160

Seal fastening profile in aluminium distance between hole centres 130 mm.

187

CODE

Version

082807954

Package

100

Package

190

Package

Buffer Ø 50x62x40 mm

CODE

Version

082824054B Buffer Ø 64x74x47 MM

CODE

Version

082807885 Buffer 50x30x38 mm

CODE 082808003 Buffer 50x30x38 mm

Version

Rubber and aluminium profiles

BUFFERS

188

CODE

Version

082827514

Package

100

Package

538

Package

824

Buffer 60x37x15 mm 24

15 60

Rubber and aluminium profiles

BUFFERS

CODE

Version

082807975 Buffer 60x42x48 mm

CODE

Version

082807995C Buffer 150x60x60 MM

CODE 082807970B Buffer 170x90x70 MM

Version

189

CODE

Version

082819535C

Package

1200

Package

780

Package

560

Package

1722

Buffer 195xx80x80 mm

CODE

Version

082820215A Buffer 200x52x80 mm

CODE

Version

082819534C Buffer 210x50x55 mm

CODE 082819536C Buffer 240x80x90 mm

Version

Rubber and aluminium profiles

BUFFERS

190

Rubber and aluminium profiles

BUFFERS CODE

Version

082807996B

Package

1060

Package

3540

Package

3600

Package

1060

Buffer 300x60x60 MM

CODE

Version

082819537C Buffer 340x100x105 mm

CODE

Version

082821105A Rubber buffer with metal insert, 400x90x100 mm

CODE 082821523B Buffer 450x57x65 MM

Version

191

CODE

Version

Package

082826241

L=665 mm

1200

CODE

Version

Package

082826766

L=455 mm

852

Version

Package

360

Black rubber buffer for side boards

8 47

Black rubber buffer for side boards with washer inside

8 47

CODE 082813790A

Black rubber buffer, thickness 7 mm. side protection for refrigerated vans.

CODE

Version

Package

072821682

S.S.

400

S.S. plate glazed , side protection for refrigerated vans.

Rubber and aluminium profiles

BUFFERS

192

Rubber and aluminium profiles

NEOPRENE BUFFERS CODE

Version

082824321

Package

Buffer in neoprene C R BUFFER FOR BODY MOUNTIG BRACKETS

CODE

Version

082824322

Package

110

Buffer in neoprene C R BUFFER FOR BODY MOUNTIG BRACKETS

CODE

Version

Package

084515960

L=1000 mm

280

Dust cover seal, nylon brush, aluminum profile - length 1000 mm

CODE

Version

Package

081309142A

L=4000 mm

1159

4000 mm bars

193

Locks - handles

194

TOGGLE LATCHES CODE

Version

Package

035425608

S.S.

035425609

Z.PL.

CODE

Version

Package

035425610

S.S.

035424858

Z.PL.

CODE

Version

Package

035425606

S.S.

035425607

Z.PL.

CODE

Version

Package

035425604

S.S.

190

035425605

Z.PL.

190

CODE

Version

Package

035425611

S.S.

100

035425612

Z.PL.

100

Locks - handles

Toogle latches mm. 47

Z.PL.SMALL LOCK WITH CATCH mm. 60

Toogle latches mm. 86

Toogle latches mm. 112

Toogle latches mm. 67,5

195

CLIMBING HANDLE CODE

Version

030400580

Package

219

Package

141

Package

CODE

Version

026400567 Handle in bright aluminum - socket head screw 2-3 mm.

CODE

Version

030420377 Black plastic handle H=44

CODE

Version

Package

071925478

S.S.

368

Climbing handle - H=mm. 46

Locks - handles

Climb-up handle in bright aluminum

196

DOOR PULL HANDLES CODE

Version

030422806

Package

Locks - handles

Black plastic door pull handle

CODE

Version

Package

071920397

S.S.

436

Door pull handle Flush-mounted handle with return spring thickness mm 10

CODE

Version

Package

071900664

S.S.

250

CODE

Version

Package

071920437A

S.S.

135

071920436A

Z.PL.

145

Door pull handle

197

EXTERNAL LOCKS CODE

Version

030526207

Package

510

Package

600

Package

510

CODE

Version

030526749 Lock Rh-Lh- in black-painted aluminum with counterhandle without safety

CODE

Version

030526208 Handle in black-painted aluminum, with key

CODE

Version

Package

030520744

Z.PL.

174

Z. pl. plate

Locks - handles

Lock Rh-Lh- in black-painted aluminum with counterhandle without safety

198

EXTERNAL LOCKS CODE

Version

020315730

Package

330

Locks - handles

Black plastic handle with key Rh-Lh

CODE

Version

Package

020512926

348

020512981

348

Version

Package

252

Package

200

Lock with striker r.h- l.h. for art.020315730

CODE 020312816 Handle in black plastic with key

CODE 030525426 Black plastic handle with key Rh-Lh

Version

199

EXTERNAL LOCKS CODE

Version

030325085

Package

310

Package

175

CODE

Version

030525399 Plastic handle RH-LH

for art. 030525396A030525397A

CODE

Version

Package

030327456

BLACK

535

CODE

Version

Package

030327457

GREY

535

Quarter turn latching system

Locks - handles

Recessed oval handle in plastic with key and gasket

200

EXTERNAL LOCKS CODE

Version

Package

030525396A

370

030525397A

370

Package

CODE

Version

020925654 Key in polyamide with insert 06 in nichel plated alloy

CODE

Version

030325653 Key barrel rotation 90° with insert 06

Protection against dust and streams of water according to IP65.

26.5 4.5

Ø28

Locks - handles

Zinc-plated steel lock with fork , without striker, straight vertical lever

CODE

Version

Package

030325657

Z.PL.

Came for key barrel

201

RECESSED LOCKS WITH S.S. PLUNGER CODE

Version

Package

030520925C

S.S.

534

030520927C

Z.PL.

520

CODE

Version

Package

030520926C

S.S.

441

Version

Package

440

Locks - handles

Recessed handle with two keys

Recessed handle without key

CODE 030500016 Recessed handle with key zinc plated pressed plunger

Recessed lock in black painted steel, zinc plated pressed plunger, with knob for opening from inside

202

RECESSED LOCKS WITH NYLON PLUNGER CODE

Version

Package

030515853

S.S.

400

Recessed handle without key

Locks - handles

Recessed lock with n y l o n n i b, d r a w n handle grip, very suitable for ventilation doors.

CODE

Version

Package

030515672A

S.S.

390

030515674A

Z.PL.

400

Recessed handle without key Recessed locks with nylon nib, designed for opening from inside.

CODE

Version

Package

030515673B

S.S.

440

030515852A

Z.PL.

444

Recessed handle with two keys Recessed locks with nylon nib, designed for opening from inside.

203

CODE

Key number

Package

071927469

3191

071927470

3192

071927471

3193

071927472

3194

071927473

3195

071927474

3196

071927475

3197

071927476

3198

071927477

3199

071927478

3200

CODE

Version

Package

030515676

S.S.

CODE

Version

Package

071921935

S.S.

Key barrel with keys - 90Â°-

Catch for handles

Tongue

Locks - handles

RECESSED LOCKS - SPARE PARTS

204

SPRING BOLT LATCH CODE

Version

Package

035422278A

S.S.

354

035422247A

Z.PL.

345

Locks - handles

Spring bolt latch Spring lock with retainer in open position, for outside mounting.

CODE

Version

Package

035422279A

S.S.

380

035422248A

Z.PL.

380

Spring bolt latch Spring lock with long tooth and retainer in open position, for outside mounting.

CODE

Version

Package

071800612A

Z.PL.

406

CODE

Version

Package

071810820Z

Z.PL.

1448

Square handle for cremone lock

Black cremone bolt Cremone bolt, to mount inside the door, closes in two directions. Range of bars 40 mm with rotation.

CODE

Version

071919201 Black anodized aluminum keyhole cover for cremone bolt

Package

205

INTERNAL LOCKS CODE

Version

Package

020500714

Z.PL.

CODE

Version

Package

020513903

Z.PL.

Version

Package

360

Locks - handles

Zinc-plated steel lock, nylon tooth

Striker for lock

CODE 030612931B Irid. zinc-plated steel lock,nylon tooth

206

INTERNAL LOCKS CODE

Version

Package

020900605A

Z.PL.

CODE

Version

Package

020900606A

Z.PL.

CODE

Version

Package

020900607A

Z.PL.

106

Locks - handles

Lock in iridescent z.pl. steel

Irid. zinc-plated steel lock with raised base

Irid. zinc-plated steel lock

207

INTERNAL LOCKS CODE

Version

Package

020900608A

Z.PL.

172

CODE

Version

Package

020926420

Z.PL.

140

Version

Package

Locks - handles

Lock in iridescent z.pl. steel

Zinc-plated steel key

CODE 020902342

Keyhole cover in black ABS opening 160Â°, keyhole diam. 16

208

LATCHES CODE

Version

Package

020500873A

Z.PL.

270

CODE

Version

Package

020500868A

Z.PL.

195

CODE

Version

Package

071815850

S.S.

212

Locks - handles

Door bolt

Complete lock set in AISI 304 stainless steel

209

BONNET HOOKS CODE

Version

Package

030518540A

Z.PL.

165

Package

196

CODE 030802755 Rubber bonnet hook mm. 115X34

Version

Locks - handles

Zinc-plated steel adjustable bonnet hook complete with striker MM.105X45

210

Gas springs

GAS SPRINGS

211

Use standard care and caution and follow these warnings: • The thrust of a gas spring will be calculated at 20°c, a higher or lower temperature would influence the thrust for about 3,5% every 10°c. The normal function proceeds within a temperature between -30°c and +80°c. Very hot environments with temperatures over 80°c a nd aggressive atmospheres cause gas spring malfunctions and may shorten its operating life. •

The assembling must be carried out as follows: in closed position the connection of the shaft has to be turned downside, this will facilitate the lubrication of the guide and of the seals and will permit a higher braking effect.

•

Ensure that the spring fittings are aligned to avoid buckling. If mounting hole is a through hole, use non threaded pins instead of screws. Avoid using blunt tools or abrasive materials that might damage the shaft surface. Avoid contact with corrosive agents or chemicals.

•

Machine vibration may affect the seals and shorten gas spring life.

•

Do not expose the gas spring to pulling forces exceeding the extension speed of the shaft.

•

Doors opened through gas springs should be equipped with an additional rod (such as in a car hood) which keeps the door open in case of gas spring failure.

HOW TO CHOOSE BEST SUITABLE GAS SPRING:

S = Gas spring thrust pressure in kg

N = Number of the gas springs

S = X x Y + 5 KG 2N x Z

Gas springs

GAS SPRINGS

212

GAS SPRINGS CODE

Version

Package

082500379D

Kg 10

180

082520461D

Kg 20

180

082520987D

Kg 30

177

CODE

Version

Package

082520464D

Kg 35

195

CODE

Version

Package

082520989D

Kg 25

223

CODE

Version

Package

082520469D

Kg 50

250

Gas springs

Gas spring MM.85-255-A3-B3

Gas spring MM.100-288-A3-B3

Gas spring MM.135-352 A3-B3

Gas spring MM.155-403-A3-B3

213

GAS SPRINGS CODE

Version

Package

082520472D

Kg 30

290

CODE

Version

Package

082520473D

Kg 50

400

CODE

Version

Package

082520475D

Kg 30

323

082520477D

Kg 40

313

CODE

Version

Package

082520994D

Kg 30

337

Gas spring MM.198-485 A3-B3

Gas spring MM.228-548-A3-B3

Gas spring MM.245-585-A3-B3

Gas springs

Gas spring MM.198-483-A3-B3

214

GAS SPRINGS CODE

Version

Package

082520480D

Kg 20

347

082520481D

Kg 30

347

CODE

Version

Package

082520479D

Kg 40

474

CODE

Version

Package

082520482D

Kg 60

521

082520483D

Kg 80

525

082510291D

Kg 110

524

CODE

Version

Package

082521381D

Kg 200

950

Gas springs

Gas spring MM.250-598-A3-B3

Gas spring MM.254-590-A3-B3

Gas spring MM.260-600-A15-B15

Gas spring MM.305-704-A15-B15

215

GAS SPRINGS CODE

Version

Package

082520484D

Kg 35

593

082520486D

Kg 55

608

082520487D

Kg 70

595

CODE

Version

Package

082510300D

Kg 100

1050

082510301D

Kg 130

1065

082521457D

Kg 200

1080

CODE

Version

Package

082520489D

Kg 80

661

082520144D

Kg 90

665

Gas spring MM.355-804-A15-B15

Gas spring MM.360-798-A15-B15

Gas springs

Gas spring MM.310-700-A15-B15

216

GAS SPRING BRACKETS CODE

Version

082514962

Package

120

Package

Gas springs

Black anodized aluminium set of two brackets for gas springs with Ø 8 mm. hole-Attacco A3-B3

CODE

Version

082524183 Female bracket in aluminium for gas springs A3-B3

CODE

Version

082525167 Aluminium male bracket for gas springs with Ø 8 mm. hole A3B3

217

GAS SPRING BRACKETS CODE

Version

082513963

Package

194

Package

100

Package

100

Gas springs

Black anodized aluminium set of two brackets for gas springs with Ø 8 mm. hole-A15-B15

CODE

Version

082520126 Aluminium male bracket for gas springs with Ø 8 mm. hole-A15B15

CODE

Version

082520127 Aluminium female bracket for gas springs with Ø 8 mm. hole-A15-B15

218

Truck body components

219

HINGES FOR SIDE BOARDS CODE

Version

Package

035421963A

Z.PL.

435

Version

Package

472

CODE 035421964A TIR hinge without fixing holes raw

H E AV Y T I R H I N G E MM.120X40

CODE

Version

Package

035412522

Z.PL.

Back plate

Truck body components

TIR hinge

220

HINGES FOR SIDE BOARDS CODE

Version

Package

035421965A

Z.PL.

236

Version

Package

187

Truck body components

TIR hinge

CODE 035421966A TIR hinge without fixing holes raw

CODE

Version

Package

035402561

Z.PL.

CODE

Version

Package

083615917A

Z.PL.

100

Back plate

Zinc-plated steel female screw for fastening hinges on aluminum side boards of for tipper-bodies

221

SIDE BOARD LOCKS CODE

Version

Package

035414326

Z.PL.

1424

CODE

Version

Package

035413588

Z.PL.

193

CODE

Version

Package

035412182

Z.PL.

1022

Striker for flush mounted lock

Recessed articulated lock with straight tooth

Truck body components

T flush mounted lock without striker

222

Truck body components

SIDE BOARD LOCKS CODE

Version

Package

035420603A

S.S.

342

035402335A

Z.PL.

342

CODE

Version

Package

035421883A

Z.PL.

355

Outer lock without striker

Zinc-plated outer lock with padlock seat, without striker

CODE

Version

Package

035420604

S.S.

035402336

Z.PL.

Striker for outer lock

223

SIDE BOARD LOCKS CODE

Version

Package

035419397

Z.PL.

740

CODE

Version

Package

035402554

Z.PL.

130

CODE

Version

Package

035412857A

Z.PL.

974

CODE

Version

Package

035402556

Z.PL.

136

CODE

Version

Package

035415657

Z.PL.

285

Striker

Zinc plated steel lock without striker

Striker

Zinc-plated steel lock with adjustable tooth and striker

Truck body components

External lock without striker

224

Truck body components

ALUMINIUM PILLARS CODE

Version

Package

035821656A

H 400 RH

1185

035821657A

H 400 LH

1185

035821658A

H 600 RH

1410

035821659A

H 600 LH

1410

Aluminium pillar with wing WITHOUT CATCH

CODE

Version

Package

035821652A

H 400 RH

1140

035821653A

H 400 LH

1140

035821654A

H 600 RH

1370

035821655A

H 600 LH

1370

Aluminium pillar without wing WITHOUT CATCH

CODE

Version

Package

035821669A

Z.PL.

Zinc plated steel catch

225

ALUMINIUM PILLARS CODE

Version

035821668A

Package

CODE

Version

Package

035821670A

Z.PL.

Zinc plated threaded steel catch

Truck body components

Bare steel catch to be welded

226

HOOP FITTINGS CODE 035412800A

Truck body components

Hoop fitting support in steel for side board covering

Version

Package

100

137

PASTORE & LOMBARDI S.p.A. con socio unico soggetta a direzione e coordinamento da parte di Hilbe S.p.A. Via Don Minzoni 3 40057 Cadriano di Granarolo Emilia (Bologna) - Italy Tel. +39 051 764111 - Fax +39 051 765414 Capitale Sociale â&#x201A;Ź 468.000 i.v. R.I. Bologna, C.F. e P.IVA 03276650375 R.E.A. della C.C.I.A.A. di Bologna 277528 www.pastorelombardi.com - info@pastorelombardi.com