Coltec

Page 1

Plantec 速 Solid Plate Patterned Panels Coltec 速 Modular Column Cladding System

Plantec 速 Coltec 速

22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222

113


Introduction Product Properties

Plantec ® and Coltec ® offer a range of metal finishing solutions, from simple wall and surface covering to the improvement of unsightly columns.

We are able to offer the following fabrication options to our Plantec ® range: • Folding, lipping and forming • Rolling and bowing

Plantec

®

The Plantec ® range offers a wide selection of patterned and embossed sheets.

• Framing • Fixing holes

Most of the patterns shown in this section are examples and in many instances

Specialist Panels

we are able to modify stud centres, pitches and spacings to create more

In most cases we can shear or laser cut sheets to

individual designs. In addition sheets can be sheared to size and can also incorporate laser cut shapes and patterns.

your requirements; this includes cutting special holes and shapes. We are also able to offer the panels folded into trays for applications such as cladding panels.

Plantec is the registered trademark of Metallwarenfabrik Neustadt GmbH

Please contact our Technical Department for further information on all specialist fabrications. NB. Minimum order quantities may apply to certain products in this section.

114

115


Most of the patterns shown within this section are examples and in many instances we are able to modify stud centres, pitches and spacing to create bespoke designs.

N01

N02

N05

N06

Square Stud Straight

Square Stud Straight

‘Squeeze’ Aluminium Sheet

Close Squares

Stud Separation: Stud Diameter: Material Thickness: Standard Sheet Sizes:

Stud Separation: Stud Diameter: Material Thickness: Standard Sheet Sizes:

Stud Separation: Studs: Material Thickness: Standard Sheet Size:

Stud Separation: Studs: Material Thickness: Standard Sheet Size:

50mm (from centres) 25mm square 1, 1.2, 1.5, 2mm 2 x 1, 2 x 1.25m

80mm (from centres) 40mm square 1, 1.2, 1.5, 2mm 2 x 1, 2 x 1.25m

80 x 40mm (from centres) 35 x 12mm 1, 1.5, 2mm 2.5 x 1.25m

8mm (from centres) 6mm 0.8, 1mm 2 x 1m

Specialist Panels In most cases we are able to shear or laser cut panels to your requirements; this includes cutting special holes and shapes. Please contact our technical

Special sizes available upon request.

Special sizes available upon request.

Special sizes available upon request.

Special sizes available upon request.

Materials:

Materials:

Materials:

Materials:

department for further information on all specialist fabrications.

Finishes:

116

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Finishes:

Aluminium Stainless Steel Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

117


Most of the patterns shown within this section are examples and in many instances we are able to modify stud centres, pitches

N09

N10

N11

N12

Anodised Propellor Relief

Pyramid Stud Straight Perforated

Round Stud Offset

Round Stud Straight (with plateau)

Relief Dimensions: Material Thickness: Standard Sheet Size:

Stud Separation: Studs: Material Thickness: Standard Sheet Sizes:

Stud Separation: Studs: Material Thickness: Standard Sheet Sizes:

28 x 8.5mm 1.6/2.8mm 2.5 x 1.25m

and spacing to create bespoke designs.

60mm (from centres) 28mm 1, 1.2, 1.5mm 2 x 1, 2.5 x 1.25, 3 x 1.5m

75mm T Pitch (from centres) 12mm 1, 1.2, 1.5mm 2 x 1, 2.5 x 1.25, 3 x 1.5m

Stud Separation: Studs: Material Thickness: Standard Sheet Sizes:

50mm (from centres) 15mm 1, 1.2, 1.5mm 2 x 1, 2.5 x 1.25m

Special sizes available upon request. Materials: Finishes:

118

Aluminium Stainless Steel Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Specialist Panels In most cases we are able to shear or laser cut panels to your requirements; this includes cutting special holes and shapes. Please contact our technical

Special sizes available upon request.

Special sizes available upon request.

Special sizes available upon request.

Materials:

Materials:

Materials:

department for further information on all specialist fabrications.

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

119


Most of the patterns shown within this section are examples and in many instances we are able to modify stud centres, pitches and spacing to create bespoke designs.

N13

N14

Stucco

Rice

Pyramid Stud Straight

Round Stud Straight

Stucco Relief

Rice Grain Relief

Stud Separation: Studs: Material Thickness: Standard Sheet Sizes:

Stud Separation: Studs: Material Thickness: Standard Sheet Sizes:

Material Thickness: Standard Sheet Size:

60mm (from centres) 28mm 1, 1.2, 1.5mm 2 x 1, 2.5 x 1.25, 3 x 1.5m

50mm (from centres) 7mm 1, 1.2, 1.5, 2mm 2 x 1, 2.5 x 1.25m

0.8mm 2 x 1m

Relief Dimensions: Material Thickness: Standard Sheet Size:

6 x 3mm 1.5 – 2mm 2.5 x 1.25m

Special sizes available upon request.

Materials:

Finishes:

120

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Special sizes available upon request. Materials:

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

Materials:

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

In most cases we are able to shear or laser cut panels to your requirements; this includes cutting special holes and

Special sizes available upon request. Special sizes available upon request.

Specialist Panels

shapes. Please contact our technical department for further information on

Materials:

Finishes:

Aluminium Stainless Steel Mild Steel Yellow Metals Polished Polyester Powder Coated Poly Vinyl Coated Mill Anodised

all specialist fabrications.

121


Coltec ® Introduction Product Properties

Coltec ® is a modular column cladding system which is both versatile in size and shape with single column lengths up to 7000mm long. Coltec ®

We offer a variety of finishes and materials:

• Nylon Coated

special features such as concealed lighting and audio applications.

• Polished

as wall and corner cladding.

180º

270º

• Polyester Powder Coated

columns can be fabricated with laser cut shapes and perforations for Coltec ® is not limited to columns but can also be easily adapted for use

Variants

• Stainless Steel

90º

Variable (up to 270º)

• Mild Steel • Aluminium

Coltec is a registered trademark of Metallwarenfabrik Neustadt GmbH

Alternative Uses Apart from the classical use of Coltec ® as a column

Joint Designs

casing it can also be adapted for use as wall and

Coltec ® offers two joint profiles for the

corner claddings. We are also able to produce

designers’ requirements.

perforations, slots or grooves within the column as a feature for lighting or speaker grilles.

Shadow Joint

Column Diameters Min: 120mm Max: According to specification

Hair Joint

Material Thicknesses Aluminium: 0.8 – 5mm Mild Steel: 0.8 – 3mm Stainless Steel: 0.8 – 3mm

122

123


Mounting

Group R

Shadow Joint

RK-S Circle

RE-S Ellipse

ED-S Triangle

ER-S Rectangle

EP-S Polygon

Shadow Joint

Shadow Joint

Shadow Joint

Shadow Joint

Shadow Joint

RK-H Circle

RE-H Ellipse

ED-H Triangle

ER-H Rectangle

EP-H Polygon

Hair Joint

Hair Joint

Hair Joint

Hair Joint

Hair Joint

Bolted Directly

With U-profile, bolted

With U-profile, clamped

D = Column without casing + 40mm

D = Column without casing + 140mm

D = Column without casing + 140mm

Hair Joint

124

Bolted Directly

With U-profile, bolted

With U-profile, clamped

D = Column without casing + 120mm

D = Column without casing + 220mm

D = Column without casing + 220mm

Group E

125


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.