Welltec

Welltec 速 Wave Form Cladding System

Welltec 速

22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222

55

Introduction Product Properties

Cadisch are proud to be the sole UK distributors for Metallwarenfabrik Neustadt GmbH. Their Welltec 速 range of profiled cladding has long

All Welltec 速 profiles can be supplied bowed with the corrugation, with some available crown

been an established product of choice for high quality cladding within

bowed against the corrugation. This is particularly

the European marketplace.

important when considering applications such

Welltec 速 offers numerous options for the external envelope and has a

Crown Bowing

Bowing and Crown Bowing

c Ar

th ng Le

as canopy roofs, tunnel linings and curved roofs.

We are also able to include progressive narrowing

well developed range of flashings and trimming profiles to aid installation.

of the overall width towards one end which makes

The product is available in a variety of finishes and materials including

Welltec 速 an ideal cladding solution for domed structures and cupola roofs.

Radius

polyester powder coated aluminium and polished stainless steel. We are able to laser cut shapes, form perforated sheets and can bow many of the profiles to suit the most ambitious of designs.

NB. Not all profiles can be crown bowed please consult our technical department for further details.

Minimum order quantities may apply to certain products in this section.

Welltec is a registered trademark of Metallwarenfabrik Neustadt GmbH

56

57

Materials and Finishes

Specification Details

Perforations

Edges

All Welltec ® products are available in thicknesses

When specifying non standard or variable Welltec ®

Welltec ® offers perforation options on most profiles

When setting out panels using Welltec ® we are

from 0.5–1mm and in a range of materials and

patterns eg. N32 please apply the following criteria:

over entire or partial areas. Typical uses are for

able to produce bespoke edging details to our

ventilation, light diffusion and acoustics. We offer

panels allowing easy fixing without the need

finishes including: W

= Wave formed Sheets

most perforation patterns including standard round

for a separate component. This allows additional

• Brass

T

= Trapezoidal Sheets

holes, squares or special shapes.

tolerance to be built in aiding on site fixing.

• Copper

SP = Specially Profiled

• Stainless Steel

S

= Extra Profiled Plates

• Mild Steel

Z

= Zigzag Sheets

• Aluminium

a) Product Group

• Polished • Natural Mill

b) Depth of Profile = in millimetres e.g. 20

• Polyester Powder Coated (PPC) • Poly Vinyl Coated (PVF)

c) Distance between profiles apex in millimetres e.g. 50

Please contact our technical department for further information on perforation options.

This section above is therefore specified W 20 / 50

58

59

Case Study Magdeburg Children’s Centre, Germany The Magdeburg Children's Centre was commissioned to be in keeping with the Millennium Tower nearby.

The space rocket themed building has been clad using Welltec ÂŽ material, where this differs from most is that the top edge of the panel style is W20/50 and opens at the bottom edge to SR20/50.

Some panels also had star window shapes laser cut out, all were face fixed using Ejot screws.

Specification Designer: Niebergall and Schaller Contractor: Rennspiess Bow GmbH Mesh Type: Welltec W20/50 - SR20/50 Material: Aluminium Thickness: 1mm Finish: Polyester Powder Coated RAL 9006

60

61

The dimensions quoted for profile heights and widths are approximate.

62

N17

N19

N20

N21

Available Materials: Aluminium

Available Materials: Aluminium

Standard Thicknesses: 1mm

Standard Thicknesses: 1mm

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 1mm

Standard Thicknesses: 1mm

63

The dimensions quoted for profile heights and widths are approximate.

64

N23

N24

N25

N26

Available Materials: Copper Brass Bronze

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

65

The dimensions quoted for profile heights and widths are approximate.

66

N27

N28

N29

N30

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

67

The dimensions quoted for profile heights and widths are approximate.

68

N31

N32

N33

N34

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

69

The dimensions quoted for profile heights and widths are approximate.

70

N35

N36

N37

N38

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Holes: K13

Holes: K13

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

71

The dimensions quoted for profile heights and widths are approximate.

72

N39

N40

N42

N45

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

73

The dimensions quoted for profile heights and widths are approximate.

74

N47

N48

N49

N50

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

75

The dimensions quoted for profile heights and widths are approximate.

N51

N52

N53

N54

Available Materials: Galvanised Steel

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

76

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

77

The dimensions quoted for profile heights and widths are approximate.

78

N55

N56

N57

N58

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Available Materials: Stainless Steel Mild Steel Aluminium

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Standard Thicknesses: 0.8, 1mm

Specialist Panels Most of our Welltec速 products can be supplied with individual hole patterns and perforations. Please contact our technical department for further information on all specialist fabrications.

79

Connecting Profiles In order to trim and co-ordinate Welltec ® cladding

Specification Dimension Key

products, we are pleased to offer a range of fully

When specifying connecting profiles it should

integrated trimming and connecting profiles.

be understood that each condition in construction

Available in all of our standard metals and finishes. Please be careful to state shape, overall

Connecting Profiles Series R

Connecting Profiles Series E

R01 Outer Corner

R02 Inner Corner

E01 Outer Corner

E02 Inner Corner

R03 Pilaster Strip

R04 Soffit

E03 Pilaster Strip

E04 Soffit

R05 Lintel

R06 Window Ledge

E05 Lintel

E06 Window Ledge

can be different. To specify use the Profile code (e.g. R01) followed by the relevant dimensions a-f.

length and material / finish when ordering. e.g. R01/a20/b5/c20/d20/e5/f20 Available Dimensions: • Lengths up to 5000mm • Thicknesses from 0.75 – 2mm

Materials:

Finishes:

• Stainless Steel

• Bright Polished

• Mild Steel

• Satin Polished

• Aluminium

• PPC

• Copper

• PVDF • Mill Finish

80

81

Connecting Profiles Series K

Connecting Profiles Series S

K01 Outer Corner

K02 Inner Corner

K03 Pilaster Strip

K04 Soffit

B01 Outer Corner

B02 Inner Corner

S01 Outer Corner

S02 Inner Corner

K05 Window Ledge

K011 Outer Corner

K021 Inner Corner

K031 Pilaster Strip

B03 Pilaster Strip

B04 Soffit

S03 Pilaster Strip

S04 Soffit

B05 Lintel

B06 Window Ledge

S05 Lintel

S06 Window Ledge

K041 Soffit

82

Connecting Profiles Series B

K06 Window Ledge

83