Perftec

Perftec 速 Perforated Metals

Perftec 速

22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222 22222222222222222222222222222222222

85

Introduction Product Properties

Specifying Perforations

The Perftec ® range of perforated metals offers controlled transmission

We are able to offer the following fabrications to

The range of hole types and configurations available

of sound and light, as well as giving both visual and functional qualities

our perforated sheets:

in the Perftec ® range are virtually limitless. Below

• Ready made panels featuring U channel edges,

is the information needed to specify your exact

to the product. Cadisch offers a wide range of perforation patterns and materials, many of which can be seen in the following pages. Many more patterns and configurations are available upon request.

We understand that the needs of individual projects can vary and so we

unperforated edges

requirements including, hole size, shape and pitch.

• Return folding • Rolling and bending • Fixing holes • Rounded corners

offer a complete bespoke panel service in order to fulfil these requirements.

• Laser cutting

Perftec is the registered trademark of R. Cadisch & Sons Ltd.

Material and Finishes The majority of our perforated products are available in the following materials and finishes: • Aluminium • Stainless Steel • Mild Steel • Yellow Metals • Polished • Mill Finish • Anodised (Aluminium only) • Polyester Powder Coated • Poly Vinyl Finish • Hot Dip galvanised

NB. Minimum order quantities may apply to certain products in this section.

• Pre Galvanised 86

87

Case Study Kimberley Road, London Satin finished stainless steel was used to complement other traditional industrial materials within this residential building. Perftec 速 panels were used as an alternative to glass, but fitted using similar clamping techniques. The satin polish of the stainless steel gives a high quality finish whilst the perforations kept the industrial theme.

Specification Mesh Type: Perftec 速 (special pattern based on K32) Material: Stainless Steel 304 Thickness: 3mm Finish: 240 grit satin polished Page No: 103

88

K10 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K11 2 x 1, 2.5 x 1.25m LR3 x 25mm Z12 x 26mm 38%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 3mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

90

Standard Panel Size: Holes: Pitch: Open Area:

K44 2 x 1, 2.5 x 1.25m LR5 x 20mm Z18 x 25mm 44%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

K46 2 x 1, 2.5 x 1.25m LR2 x 20mm Z10 x 25mm 31.3%

Available Material Options: Aluminium 1 – 2mm Stainless Steel 1 – 2mm Mild Steel 1 – 2mm Yellow Metals 1 – 2mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m LR5 x 25mm Z16 x 28mm 53%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 4mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

91

K47 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Slots: Pitch: Open Area:

K49 2 x 1, 2.5 x 1.25m LR4 x 20mm Z16 x 24mm 40%

Available Material Options: Aluminium 1 – 4mm Stainless Steel 1 – 3mm Mild Steel 1 – 4mm Yellow Metals 1 – 4mm

92

Standard Panel Size: Holes: Pitch: Open Area:

K51 2 x 1, 2.5 x 1.25m LR0.8 x 10mm Z4.5 x 13mm 23%

Available Material Options: Aluminium 0.8mm Stainless Steel 0.8mm Mild Steel 0.8mm Yellow Metals 0.8mm

Standard Panel Size: Holes: Pitch: Open Area:

N15 2 x 1, 2.5 x 1.25m LR1 x 20mm Z8 x 24mm 23.6%

Available Material Options: Aluminium 1mm Stainless Steel 1mm Mild Steel 1mm Yellow Metals 1mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m LR9 x 18mm U30 x 30mm N/A

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

93

K12 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K13 2 x 1, 2.5 x 1.25m R12mm T16mm 51%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

94

Standard Panel Size: Holes: Pitch: Open Area:

K14 2 x 1, 2.5 x 1.25m R3mm T5mm 33%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 1.5mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

Standard Panel Size: Holes: Pitch: Open Area:

K16 2 x 1, 2.5 x 1.25m R40mm T50mm 58%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m R3.5mm T6mm 31%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 3mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

95

K17 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K18 2 x 1, 2.5 x 1.25m R15mm T20mm 51%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

96

Standard Panel Size: Holes: Pitch: Open Area:

K19 2 x 1, 2.5 x 1.25m R10mm T15mm 40%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

K20 2 x 1, 2.5 x 1.25m R4.5mm U15mm 7.1%

Available Material Options: Aluminium 1 – 4mm Stainless Steel 1 – 3mm Mild Steel 1 – 4mm Yellow Metals 1 – 4mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m R7mm T9mm 55%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

97

K21 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K22 2 x 1, 2.5 x 1.25m R2.5mm T4mm 32.5%

Available Material Options: Aluminium 1 – 2mm Stainless Steel 1 – 2mm Mild Steel 1 – 2mm Yellow Metals 1 – 2mm

98

Standard Panel Size: Holes: Pitch: Open Area:

K23 2 x 1, 2.5 x 1.25m R15mm U36mm 13.6%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

K24 2 x 1, 2.5 x 1.25m R20mm U48mm 13.6%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m R5mm T7mm 46%

Available Material Options: Aluminium 1 – 4mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 4mm

99

K25 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K26 2 x 1, 2.5 x 1.25m R9mm T14mm 37%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

100

Standard Panel Size: Holes: Pitch: Open Area:

K27 2 x 1, 2.5 x 1.25m R30mm T40mm 51%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

K28 2 x 1, 2.5 x 1.25m R4mm T6mm 40%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 3mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m R8mm T10mm 58%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 5mm

101

K29 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K30 2 x 1, 2.5 x 1.25m R10mm U20mm 19.6%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 5mm

102

Standard Panel Size: Holes: Pitch: Open Area:

K31 2 x 1, 2.5 x 1.25m R70mm T80mm 69%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

K32 2 x 1, 2.5 x 1.25m R1.5mm T3mm 23%

Available Material Options: Aluminium 1mm Stainless Steel 1mm Mild Steel 1mm Yellow Metals 1mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m R6mm T9mm 40%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 3mm Mild Steel 1 – 4mm Yellow Metals 1 – 5mm

103

K33 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K34 2 x 1, 2.5 x 1.25m R20mm T28mm 46%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

104

Standard Panel Size: Holes: Pitch: Open Area:

K35 2 x 1, 2.5 x 1.25m R2mm T3mm 40%

Available Material Options: Aluminium 1 – 2mm Stainless Steel 1 – 2mm Mild Steel 1 – 2mm Yellow Metals 1 – 2mm

Standard Panel Size: Holes: Pitch: Open Area:

K53 2 x 1, 2.5 x 1.25m R50mm T60mm 63%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m R15mm T22mm 42%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 5mm

105

K36 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K37 2 x 1, 2.5 x 1.25m C10mm U15mm 51%

Available Material Options: Aluminium 1 – 4mm Stainless Steel 1 – 3mm Mild Steel 1 – 4mm Yellow Metals 1 – 4mm

106

Standard Panel Size: Holes: Pitch: Open Area:

K38 2 x 1, 2.5 x 1.25m Vario 40 N/A

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

K39 2 x 1, 2.5 x 1.25m Vario 44 N/A

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m C15mm U60mm N/A

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

107

K40 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K41 2 x 1, 2.5 x 1.25m C5mm U7.5mm 44%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 3mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

108

Standard Panel Size: Holes: Pitch: Open Area:

K42 2 x 1, 2.5 x 1.25m CD8mm Z12.5mm 44%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 3mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

Standard Panel Size: Holes: Pitch: Open Area:

K43 2 x 1, 2.5 x 1.25m C3mm U5mm 36%

Available Material Options: Aluminium 1 – 2mm Stainless Steel 1 – 2mm Mild Steel 1 – 2mm Yellow Metals 1 – 2mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m C8mm U12mm 44%

Available Material Options: Aluminium 1 – 4mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 4mm

109

K45 Please note panel sizes may distort with certain patterns, panel size, hole and pitch configurations. We will suggest alternatives accordingly.

Standard Panel Size: Holes: Pitch: Open Area:

K48 2 x 1, 2.5 x 1.25m C8mm T12mm 44.4%

Available Material Options: Aluminium 1 – 4mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 4mm

110

Standard Panel Size: Holes: Pitch: Open Area:

K50 2 x 1, 2.5 x 1.25m C6mm U9mm 44%

Available Material Options: Aluminium 1 – 3mm Stainless Steel 1 – 3mm Mild Steel 1 – 3mm Yellow Metals 1 – 3mm

Standard Panel Size: Holes: Pitch: Open Area:

K52 2 x 1, 2.5 x 1.25m C20mm U50mm N/A

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 5mm Mild Steel 1 – 5mm Yellow Metals 1 – 5mm

Standard Panel Size: Holes: Pitch: Open Area:

2 x 1, 2.5 x 1.25m C25mm U30mm 51%

Available Material Options: Aluminium 1 – 5mm Stainless Steel 1 – 4mm Mild Steel 1 – 4mm Yellow Metals 1 – 5mm

111