ARCHITECTURAL PRODUCTS
M AY 2 0 1 9 // V O L 1 7 N O 4
A RCH-PROD U C T S .COM
Form
Inspired Product + Material Choices PRIORITY FOCUS: Health and Wellness in Educational Design
THE COORSTEK CENTER FOR APPLIED SCIENCE AND ENGINEERING
A NEW CAMPUS STANDARD 70
74
a connection to the green
Bohlin Cywinski Jackson’s design employs massing and materiality to connect to the site’s historical context as well as the omnipresent Front Range landscape. The glass façade not only reflects its environment on the exterior, but provides a floor-to-ceiling connection with outdoors throughout the interior.
May 2019 1905APCVR02.indd 200
5/2/19 1:57 PM
THE BUTTERFLY EFFECT The simplest ideas can sometimes have the biggest impact in creating signature spaces. Ultima® Create!™ Ceiling Systems allow you to transfer custom artwork onto high performance acoustical panels for a show-stopping visual. Take custom design to new heights with all the benefits of Ultima – including excellent sound absorption and resistance to impact, scratching, water, and soil. See how easy it is to make an impact with a simple idea at armstrongceilings.com/create
• 1905 Ad-spread.indd 200
4/30/19 9:06 AM
ULTIMA ® CREATE!™, AXIOM ® CLASSIC, AND ULTIMA ® LAY-IN AND TEGULAR MAJESTIC WAY ELEMENTARY SCHOOL, SAN JOSE, CA / DOUGHERTY ARCHITECTS, OAKLAND, CA
Circle 23
• 1905 Ad-spread.indd 201
4/30/19 9:06 AM
Find Additional Space
where you never knew it existed
C
M
Y
CM
MY
CY
MY
K
Premium Performance Insulation With an R-value of 16 on two inches, Kingspan Kooltherm® premium performance rigid insulation has a higher R-value than any commonly used insulation. The width of external walls incorporating Kooltherm insulation is thinner than comparative solutions – facilitating internal space gains without increasing the overall designed footprint of a building. Kooltherm’s higher R-value provides thinner insulation solutions. A thinner insulation can result in thinner external wall construction. A thinner external wall construction can result in greater internal floor area. A greater internal floor area can result in a greater Return on Investment (ROI).
Learn more by downloading the Real Value of Space white paper at: kingspaninsulation.us 800.241.4402
®Kingspan, Kooltherm and the Lion Device are Registered Trademarks of the Kingspan Group plc in the US, Canada and other countries. All rights reserved.
Circle 24
• 1905 ArchProd Ad2.indd 2
5/3/19 8:32 AM
FLOOR/CEILING SOUND CONTROL
1 3/4
SIMPLIFIED.
1/2
Maxxon’s Acousti-Mat® now features more straightforward descriptive naming, easing the frustrations that selecting a sound control system can often bring…the mat name is now distinguished by the thickness!
1/4
FIND THE RIGHT SYSTEM FOR YOUR PROJECT WITH INNOVATIVE COMPARISON TOOLS LIKE: INTERACTIVE SYSTEM SELECTOR
VIRTUAL ACOUSTI-MAT APARTMENT TOUR >
NEW
Toddler Jumping 3/4" UNDERLAYMENT
Choose your assembly, Sound Mat and Underlayment Thickness and see the expected system performance and download associated detail drawings and specifications.
Listen to a variety of multifamily living common complaint noises and hear how mat thickness can impact sound performance.
WWW.MAXXON.COM/VAA
WWW.MAXXON.COM/SELECTOR
To learn more: 800-356-7887 • info@maxxon.com
www.maxxon.com
© 2019 Maxxon® Corporation, all rights reserved. Circle 25
• 1905 ArchProd Ad2.indd 3
4/30/19 8:38 AM
JUST AS YOU IMAGINED Where texture, warmth and color strike a perfect balance. A place where you’ve always belonged. Where life’s richest moments are meant to take place.
eldoradostone.com
Circle 26
• 1905 ArchProd Ad2.indd ArchProd 4 Eldorado Stone ImaginedMay2019 040419.indd 1
4/30/19 8:38 PM AM 4/4/19 5:55
WHO KNEW A BRICK COULD HAVE FEATURES WORTH POINTING OUT?
NewBrick is available in standard and custom colors and finishes.
Patented built-in alignment guide speeds application.
High-tech core reduces weight, improves energy efficiency.
25-year warranty.*
With so many advantages over old brick, NewBrick is building a reputation as the ideal solution for the future of brick construction.
Learn more at newbrick.com, or call 1-833-NEWBRIK.
* When installed over any NewBrick CI System.
• 1905 ArchProd Ad2.indd 5
Circle 27
5/1/19 4:01 PM
Moving Everest Charter School, Chicago, IL Installing contractor: WBR Roofing Architect: Team A General Contractor: Novak Photographer: Scott Bell Materials: 7/8-in. corrugated, 7/8 -in. perforated Color: Charcoal
Owner: By The Hand
Fun Flexibility “It’s a fun material because it’s very flexible to design with and doesn’t drive costs up.” -Joe Buehler, AIA, LEED AP BD+C, TEAM A 7/8-in. perforated corrugated panels overlay the graphic
NEW PHOENIX PL ANT W E ST C OAST D E L I V E RY
Case study at PAC� CL AD.COM�MOVINGE VEREST PAC-CLAD.COM | INFO�PAC�CLAD.COM IL: 800 PAC CLAD GA: 800 272 4482
MD: 800 344 1400 MN: 877 571 2025
TX: 800 441 8661 AZ: 833 750 1935
Visit us at A’19 – booth 6416 Circle 28
PAC Moving Everest 2019 ARCH PROD AIA.indd 1 • 1905 ArchProd Ad2.indd 6
4/11/2019 2:26:35 PM 4/30/19 8:38 AM
table of contents
66
52
50
The Product Publication of the U.S. Architectural Market
FEATURES:
26 M AY 2 0 1 9 // V O L 1 7 N O 4
Trend Lines // by Alan Weis + Jim Crockett
Multifamily Hits New Peaks. Smarter design is becoming a hallmark in multifamily facilities, as roofi ng takes an even more prominent role.
A RCH-PROD U C T S .COM
Form
70
Inspired Product + Material Choices
THE COORSTEK CENTER FOR APPLIED SCIENCE AND ENGINEERING
A NEW CAMPUS STANDARD 70
76
Form // by Mindi Zissman The CoorsTek Center for Applied Science and Engineering shines as a modern visual centerpiece at the heart of campus.
Function // by Vilma Barr United Therapeutics’ Unisphere is a functioning work of building science and applied environmental art.
74
a connection to the green Bohlin Cywinski Jackson’s design employs massing and materiality to connect to the site’s historical context as well as the omnipresent Front Range landscape. The glass façade not only reflects its environment on the exterior, but provides a floor-to-ceiling connection with outdoors throughout the interior.
ON THE COVER:
Rocky Mountain Way With the Rocky’s Front Range as its backdrop, views to the outdoors were critical. At the same time, CBJ employed vertical fins and mullions to break down the massive expanse of glass. Page 70
PRIORITY FOCUS:
All is Wellbeing
36
Important in all aspects of educational facilities, health and wellness are shaping today’s K-12 designs with enhanced daylighting, IAQ, thermal comfort and acoustics. by Barbara Horwitz-Bennett, Contributing Editor
Photography: Nic Lehoux
DEPARTMENTS:
Specifiers’ Solutions
Perspective Overcoming ‘Brutti’ Boxes and Cultural Restraints by Jim Crockett, Editorial Director
8
82
University of Iowa’s Music Renaissance Getting Back on Track With Style Dancing in the Light
Resources, Events & Letters
10
On Spec
12
Geothermal Contributes to Net-Zero Success Wing at Florida Mall Offers Sunlit Experience
Architectural Products Magazine, Volume 17, Number 4
Priority One: Developing a Water Management Plan
Architectural Products (ISSN 1557-4830) is published monthly except combined
Pumping Up Carbon Control
issues in Jan/Feb and July/Aug by Construction Business Media, LLC, 579 N. First Bank Dr., Suite 220, Palatine, IL 60067. Periodicals postage paid
by John Mesenbrink
by John Mesenbrink
Product Focus
Product Developments
Lighting + Controls Conveyance Landscape
at Palatine, IL and additional mailing offi ces. POSTMASTER:
Pinellas County Chooses Composite Decking
Send address changes to Architectural Products Magazine,
Functional Facades
440 Quadrangle Drive, Suite E, Bolingbrook, IL 60440.
Non-Toxic Furniture
16
94 by Chuck Ross by Megan Mazzocco by Megan Mazzocco
SUBSCRIPTION INQUIRIES:
Design with Local Materials
Educational Advertising Section
Th ere is no charge for subscriptions to qualifi ed requestors in the United States.
Blue Roofs
Next Stage: Sustainable Design (1.0 AIA LU/HSW) by Jeanette Fitzgerald Pitts
All other annual domestic subscriptions will be charged $59 for standard delivery or $94 for air mail delivery. All subscriptions outside the U.S. are $94.
Net-Plus Energy Building
For subscriptions, inquiries or address changes, call 630-739-0900.
by AP staff
Copyright © 2019 Architectural Products Magazine. All rights reserved. Nothing in publication may be copied or reproduced without prior written permission of the publisher. All material is compiled from sources believed to be reliable, but published without responsibility for errors or omissions. Architectural Products assumes no responsibility for unsolicited manuscripts or photos. Printed in USA.
05 . 2019
1905APTOC03.indd 7
100
Last Detail New and Improved The Latest Product, Material and System Advances by AP staff
48
112
Aimee Rowbottom Director of Architecture and Interiors, Jacobs by AP Staff
ARCHITECTURAL PRODUCTS
7
5/2/19 8:52 AM
perspective
Overcoming ‘Brutti’ Boxes and Cultural Restraints I’ve got a little “Rhymin’ Simon,” as in Paul, on my mind, as the opening line of “Still Crazy, After All these Years” keeps popping up: “I met my old lover on the street last night…” It wasn’t a literal case of connecting with a former paramour, but rather that I found myself in my old stomping grounds in Northwest Indiana—the locale of the first newspaper I worked at out of college in the ’80s. At the time, my beat covered a collection of small towns that were starting to feel the creep of Chicago, as more unsatisfied citizens made the exodus to the “country.” Yet more than a quarter century later, heading down Highway 41, I felt a lot less nostalgic than the ruminating Simon, and more like the tearful native American observer in that ’70s PSA, choked up about the pollution and garbage fouling this once pristine land. In this instance, it was garbage of another sort that made me sad—the homogeneity of it all; the sad state of the built environment that everything, everywhere, looks alike—the same strip malls, chains, restaurants and big boxes populating Everywhere, USA. I was hit with more of this “vu ja de,” as Robin Williams once joked, on the grounds of the community college my boys attended. Specifically, while waiting to meet a colleague, I found myself back in the library’s periodical section browsing international architectural publications. In flipping through “Domus,” an Italian publication, I came across a story by a critic named Christian Burklein, who wrote a story “Ugly Boxes Everywhere”—It seems the phenomenon affecting once-rural America, is not exclusive. In Burklein’s story, he notes one Italian grocer, Bernardo Caprotti, has managed to find a way not to build ugly boxes. “I don’t think making lovely things costs much more than making ugly ones. It just takes a touch of elegance, and someone who is good with a pencil.” If only there were more such enlightened souls… Alas, another of the author’s comments—the fact that these “brutti” (ugly) buildings are often proposed and built without an architect—because in the eyes of local planners, they’re “unassuming civil constructions”—means, too often, we’re left with communities that offer little inspiration, and establish little, if no distinction, from one another. That said, I’m proud, this issue, to reveal an example of a break in this chain, with the spotlight shining on Silver Spring, Md., and United Therapeutics’ “Unisphere,” project, our function feature. “Unabashedly innovative,” notes reporter Vilma Barr, who describes it as the product of the shared inputs from a dedicated team of designers, and a company driven to create, not only a visually striking building, but a net-zero structure in the heart of a dense, urban
8
ARCHITECTURAL PRODUCTS
1905APPRV.indd 8
Gary Redmond
Managing Partner Director Publishing Operations gredmond@cbmedia.us.com
Tim Shea
Managing Partner Director Business Development tshea@cbmedia.us.com
EDITORIAL
Jim Crockett
Editorial Director jcrockett@cbmedia.us.com
Megan Mazzocco
Senior Editor mmazzocco@cbmedia.us.com
John Mesenbrink
Copy Editor jmesenbrink@cbmedia.us.com
Contributing Editors Vilma Barr John Mesenbrink Alan Weis
core. In fact, Vilma points out the company’s decision makers rejected the concept of a greenfield office park, as it would have no positive effect on uplifting its surroundings. It seems there are enlightened souls out there; the trick is finding them… Speaking of breaking chains, this issue will also break some norms within the realm of our own publishing experience, in that we’re going to be introducing a healthy dose of net zero content beyond the aforementioned feature. For those of you who haven’t seen Disney’s “Christopher Robin,” which is set in post-WWII London, [SPOILERS] a critical moment occurs in the film when the protagonist, preparing for an important presentation, loses his papers to the wind after a mishap. Yet amid this misfortune, hope arises when one of the pages lands upside down, and inspires a new perspective. The Prodgial page featured a triangular graph breaking down the company’s sales. The bulk of which, for this fictional high-end luggage company, was only to a small segment—the well off. But when C-Rob looked at the inverted pyramid, he saw the opportunity for big sales by marketing a more affordable product to the larger community to “go on holiday.” Because market forces are necessitating that we look at things differently, we are also changing things up, including the audiences that receive content from our other publications. Notably, we’re embedding content that would appear in our sister publication, Net Zero Buildings, here. With 2030 rapidly approaching, the time to act is now, as we feel this message needs to be communicated to the more mainstream in the AEC community, than those who have already converted to the world of high-performance design. Here’s to thinking outside the box.
Barbara Horwitz-Bennett Chuck Ross Mindi Zissman
ART + DESIGN
Dave Pape
Vice President, Director, Art + Production dpape@cbmedia.us.com
Lauren Lenkowski
Associate Art Director llenkowski@cbmedia.us.com
Christine Ha
Graphic Designer cha@cbmedia.us.com
CIRCULATION MANAGEMENT
Jeff Heine
630-739-0900
ADVERTISING SALES
Gary Redmond Tim Shea 847-359-6493 847-359-6493 gredmond@cbmedia.us.com tshea@cbmedia.us.com Michael Boyle 847-359-6493 mboyle@cbmedia.us.com
Jim Oestmann 847-924-5497 joestmann@cbmedia.us.com
David G. Haggett 847-934-9123 dhaggett@cbmedia.us.com
Jim Führer 503-227-1381 jfuhrer@cbmedia.us.com
Bob Fox 917-273-8062 bfox@cbmedia.us.com
EDITORIAL SUBMISSIONS
Architectural Products c/o Construction Business Media LLC, 579 First Bank Drive, Suite 220, Palatine, IL 60067; Editorial: 847-359-6493; Fax: 847-359-6754; info@arch-products.com (Copyright © 2019 Construction Business Media LLC)
Member:
Jim Crockett, editorial director
05 . 2019
5/2/19 10:02 AM
© 2019 NANA WALL SYSTEMS, INC.
CONSTRAINED.
NanaWall® HSW systems’ single track sliding glass walls offer an unlimited number of panels up to 12 feet tall, creating wider, more sweeping views. Built to withstand weather and commercial use, our durable systems store remotely in bays or hidden closets, utilizing unused space efficiently. Take your walls and ideas further at nanawall.com/hsw.
Circle 29
• 1905 ArchProd Ad2.indd 9
4/30/19 8:38 AM
resources, events & letters
resources
events
IN PRINT
MAY 2019
CENTRIA debuted a new brochure for their Formawall High Performance Building Envelope system, which highlights product and design possibilities, as well as system support. www.centria.com LEGE NDARY
FORMAWALL® High Performance Building Envelope System
FIND NEW FREEDOM TO CREATE
8 15 16
9
9
8 10
10 11 12
Formawall is the complete building envelope system with built-in high performance and unmatched design flexibility. This powerful combination is what gives architects newfound freedom to focus on what they love most – designing remarkable buildings for those who will occupy and enjoy them for years to come.
CENTRIA.com 1.800.759.7474 1005 Beaver Grade Road Moon Township, PA 15108-2944 Phone: 412.299.8000 Fax: 412.299.8317
19 20 21 22 23 25
Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. In a continuing effort to refine and improve products, CENTRIA reserves the right to discontinue products at any time or change specifications and/or designs without incurring obligation. To ensure you have the latest information available, please inquire or visit our website at www.CENTRIA.com.
Reference FORMLEGENDARY 1/19 5M LO/GCS Copyright © 2019 CENTRIA, an NCI Building Systems company. Printed in the U.S.A.
IN PERSON
Knoll, as part of NeoCon, will host “Design Days” June 10-12 at its new Chicago showroom at 811 W. Fulton. Several new designs and trends will be discussed and exhibited, including “resimercialization.” www.knoll.com
Lightfair
May 19-23 Pennsylvania Convention Center, Philadelphia www.lightfair.com
JUNE 2019
15 16
RESEARCH
9
In its latest research effort, the American Society of Interior Designers has produced “Hospitality Design and WellBeing,” a guide to quality sleep in hotels. www.asid.org
9
8
9
8 10
10
6
7
8
10 11 12
19 20 21 22 23 25
AIA Conference on Architecture 2019 June 6-8 Las Vegas conferenceon architecture.com
The Rocky Mountain Lighting Academy Gensler has also released new research through its Research Institute. Its 2019 U.S. Workplace Survey delves deep into the open vs. closed office debate, with many solutions and recommendations. www.gensler.com ONLINE
June 6-9 University of Colorado Boulder www.colorado.edu
NeoCon
June 10-12 The Mart, Chicago www.neocon.com
Lighting manufacturer Acuity Brands has launched a redesigned website which promises faster loading speeds, better searchability and enhanced mobile responsiveness. www.acuitybrands.com LP Building Solutions has launched a new app for its BuildSmart program. Available at the App Store or Google Play, the BuildSmart program is geared toward installation and product training. www.lpcorp.com
CORRECTION
In the April Last Detail department on p. 80, Ben Stapleton’s title was misidentified. He is the executive director of the LA chapter of the USGBC, and co-founder of the Los Angeles Better Buildings Challenge. In the photo caption, the project was also misidentified. It is the Watts Community Healing Garden.
Circle 30
1905APLTE.indd 10
05 . 2019
5/2/19 8:49 AM
Architectural Products Full Page Ad (Trim: 10.375x12.5 Bleed: 10.625x12.75)
QuadCore™ protects against fire, smoke and ordinary design. Kingspan insulated panels featuring QuadCore™ Technology are designed to make you look good. Inside and out. For starters, the innovative cell formulation inside each panel provides superior fire resistance and unmatched health and wellness certification. Back that up with unrivaled thermal performance, a 30-year thermal warranty and enviable design flexibility, and you’ll quickly see how the QuadCore™ portfolio can help bring your design vision to life. Get the full details at kingspanpanels.com.
Find us at AIA booth #4107 to see what Kingspan can do for you and your clients.
Circle 31
94879_KS_QuadCore_Ad_AP_10.375x12.5_FINAL.indd 1 • 1905 ArchProd Ad2.indd 11
4/25/19 3:28 PM 4/30/19 8:38 AM
on spec by John Mesenbrink Contributing Writer
Best Practices in Water Conservation ›› Management Plans
Priority One: Developing a Water Management Plan In the past, a sound water management plan may not have been a high priority for building owners. Not any longer. There is increasing attention on the need to improve water management, whether to increase resiliency or address water shortages caused by drought, or simply to respond to the rising cost of water and sewer rates. In fact, according to a new white paper entitled “The Global Value of Water,” published by Global Water Intelligence, in partnership with Arup, the paper—which features world-wide analysis and commentaries on The Global Water Tariff Survey—notes the global average price of water and wastewater rose by 3.8% to $2.04—only held down by price cuts in Northern Europe and cities in Africa and the Middle East choosing not to increase rates. In some extreme cases, such as in Cape Town, South Africa, the city experienced a 390% increase in the benchmark price of water and wastewater services.
Commitment from the top has to be in place, so it’s clear that this is a top priority of the building owner or manager. Keep in mind, in most cases, a building pays for water use twice, as many sewer charges are based on the water supplied to the building. So what to do? The EPA has a pretty good idea. According to Lee Forsgren, deputy administrator for EPA’s Office of Water, do the following: 1) Commit. Put a team in place to develop and implement a water management plan. The commitment, says Forsgren, has to be made at a high level so it is clear that it is a priority of the owner or property manager. “The team should include people from across the organization including the facility manager who understands the building’s mechanical systems and basic infrastructure, staff responsible for regulatory compliance, and staff responsible for overseeing cleaning.” 2) Create an Assessment. Carry out a comprehensive assessment of facility water use. The only way to know exactly how a building uses water and where it consumes the most, notes Forsgren, is to conduct a water assessment and develop a water balance. “This will also help identify potential efficiency projects and prioritize efforts. This begins with collecting the billing data for at least the most recent two years to help set a baseline for assessing
12
ARCHITECTURAL PRODUCTS
1905APONS.indd 12
WATER MANAGEMENT CRITICAL
Capetown, South Africa, according to the Global Water Tariff Survey, experienced a 390% increase in the benchmark price of its water and wastewater fees.
progress,” says Forsgren, adding it’s also necessary to inventory the major water-using fixtures. “Consider the need for additional flow meters for larger systems to better manage water use. Don’t forget to assess outdoor water use.” 3) Develop an Action Plan. Create a plan that identifies specific projects and prioritizes them for action. “Use the information from the assessment to determine where there are opportunities for significant water savings and, if associated with hot water, energy savings,” says Forsgren. “Some projects may only require changes to standard operating procedures, but some may need new equipment,” adding a good plan also identifies how projects can be funded. “Can activities be funded using operating expenses or will they require capital financing? Buildings that use energy service companies may find that they are also able to carry out water efficiency projects through the contracts.” 4) Track Progress and Share the Information. Review any meter readings and water bills, says Forsgren, to confirm that expected water savings are being achieved. “Sharing the results is also important because it builds accountability, helps to recognize success, or identify areas for improvement.” Beyond saving money, for buildings in areas subject to drought, says Forsgren, having a plan to manage water use will improve resiliency to shortages. Elsewhere, Forsgren notes corporate
social responsibility is also a focus for a growing number of companies. “Demonstrating that they are addressing water use helps to demonstrate that the owner is a good steward. Some cities that have mandatory energy reporting and disclosure for buildings are now extending that requirement to water.”
Details Matter Finalizing the punch list, Forsgren says it’s important for employees and occupants to be aware if the building is carrying out a water management plan to use water more efficiently. “For example, if a hotel is carrying out a towel reuse program—but the cleaning staff does not understand why, or supervisors fail to follow up on implementation—savings that management is counting on will not be realized.” It’s also important to update standard operating procedures and educate employees on the changes and the reason for making them. “Consider newsletters to update employees on progress or recognition programs for employees that come up with solutions that help achieve water-saving goals, says Forsgren. “People working or visiting the building need to know that they are part of the program and that if they see water waste, they should be emboldened to report it to the proper personnel or suggest operation changes that include water use. Instead of being part of the problem, educated employees and occupants can become part of the solution.”
05 10.2014 . 2019
5/2/19 10:08 AM
PREMIUM EFFICIENCY. CUSTOMIZED ZONING. HIGHER PROFITS. 69º
71º
73º
68º
70º
72º
The Fujitsu J-Series. A premium whole home, room-by-room solution giving you and your customers the best of all worlds. • • • • •
Improved comfort with zone-by-zone temperature control Increased energy efficiency through zoning Reduced sound levels Ultimate design flexibility Easy installation, service and maintenance
Remember, when your customers want the very best products, it’s your bottom line that benefits. constantcomfort.com
The Fujitsu J-Series…Premium benefits. Premium profits. Circle 32
• 1905 ArchProd Ad2.indd 13 2814_FUJ_Higher Profits ad_Net Zero_10.375x12.5_4.9.19_PUB.indd 1
4/30/19 8:38 AM 4/9/19 1:06 PM
on spec by John Mesenbrink Contributing Writer
Best Practices in HVAC ›› Heat Pumps, VRF
Pumping Up Carbon Control A couple of trends are coming to bear in downtown Bridgeport, Conn.—adaptive re-use and “electrification.” The former is self-explanatory, the latter is a trend surfacing in California, Colorado (Boulder) and New York City, where it’s become the desire of various governmental entities to ween their citizens and businesses off of fossil-fuel-based HVAC, to those electrically powered, which, theoretically, would be powered by some form of renewable energy. Last year at the AIA conference in New York, we addressed this issue in a special Net Zero Buildings’ panel, which was recapped in that magazine’s September issue. There, the focus was on VRF—variable refrigerated flow HVAC technology. But in the case of Bridgeport, its consultants went a different direction, and opted for heat pumps. Before briefly examining the differences, let’s take a look at the project. Spinnaker Real Estate redeveloped three vacant, but historic buildings in the city’s downtown, into a single property, now known as Harral Security Wheeler (HSW), adding retail and commercial space on the lower levels, and more than 70 residential units on the upper floors.
With limited exterior space, installing air conditioning wall units was impossible without damaging the buildings’ historic architectural elements. Working with consultants United Illuminating, the firm was able to retrofit the historic buildings with more modern lighting and heating equipment, saving them upwards of $50,000 in annual energy costs. The project was funded through a combination of historic rehabilitation tax credits, Brownfield programs, private equity and $26,235 in energy fund incentives. Using UI’s energy model, the upgrades could result in roughly $50,000 of annual energy savings. “The energy incentives allowed us to provide better and more efficient equipment in the building’s common areas, which are in use 24 hours a day, 365 days a year,” says Spinnaker Real Estate President Kim Morque. “The incentive shortened the payback period to justify the additional costs of the project. By their nature, Historic Tax Credit projects require subsidies to make projects feasible. The energy incentive helped lower construction and operating costs,” says Morque. With limited exterior space because of the large windows, installing air conditioning wall units was impossible without damaging the buildings’ historic
14
ARCHITECTURAL PRODUCTS
1905APONS.indd 14
SHOT IN THE ARM
Th ree vacant downtown historic buildings, now known as Harral Security Wheeler (HSW), have been repurposed into retail and commercial space on the lower levels and more than 70 residential units on the upper floors.
architectural elements. As a result, UI turned to heat pump units. According to UI’s Glen Eigo, the engineer on the project, as opposed to VRF. “A VRF requires a central condensing unit and a problem with that unit can cause problems to multiple tenants,” says Eigo. “Also individual heat pumps make it easier to have separate meters for each tenant without the need for sub-metering. This makes each tenant responsible for their own utilities and the developer does not get involved.” So, what’s the difference? According to Mike Smith, senior manager of marketing communications, Mitsubishi Electric Trane HVAC U.S.—the company is presently working with NYC and Boulder on electrification initiatives—heat pumps are designed to transfer thermal energy to and from interior spaces. At the most basic level, he says, a heatpump system consists of an outdoor unit connected to one or more indoor units via a pair of refrigerant piping. “During heating, the outdoor unit extracts ambient heat, and using refrigerant as the medium, transfers heat to interior spaces. During cooling, the indoor unit transfers heat from interior spaces to the outdoor unit where the heat is rejected,” says Smith. He adds split-ductless and variable-capacity ducted heat-pump systems are popular among
residential and light-commercial architects, as these systems reduce or eliminate bulky ductwork and are more compact than traditional systems. VRF, on the other hand, is more suitable for larger facilities. “VRF systems offer more connections to indoor units per outdoor unit, and provide greater capacities [tonnage] for heating and cooling compared to residential and light commercial systems,” says Smith, adding VRF systems can be ductless, ducted or a hybrid. “Heat pump systems are typically applied in moderate climates and in buildings with a single zone. In buildings with diverse requirements—such as a hotel, office or multifamily building—architects select heat-recovery VRF systems for simultaneous heating and cooling.” Ultimately, he says, VRF systems and residential heat pump systems enable architects to design comfort zones of various sizes and with consideration for how occupants will use a given zone. “Each zone is served by at least one indoor unit, which can be controlled individually to customize comfort. The variety of indoor units include ductless options such as ceiling cassettes, wall-mounted units and floormounted units as well as ducted options such as low-profile air handlers, multi-position air handlers and horizontal-ducted units.”
05 10.2014 . 2019
5/2/19 10:08 AM
Circle 33
• 1905 ArchProd Ad2.indd 15
4/30/19 8:38 AM
product developments
material advances + product breakthroughs
SUNNY DISPOSITION
The 300-ft. long cablenet supports glass panels inclined to capture the sky and curved along their top edge to capture the plaza landscape and activity below.
Build it and... ... they will come—or so told the 1989 Kevin Kostner film “Field of Dreams.” For developers, and designers alike, such a credo may or may not prove the tipping point required to launch grand architectural visions. The movie, ultimately, is as much about damaged relationships—and healing—between fathers and sons, as it is about baseball. Indeed, one might extrapolate that a similar dynamic exists between architects and developers—really anyone of a creative persuasion that’s paired with someone charged to watch the bottom line—or as frequently happens in the film industry—someone brought in to “save” a film so it might fare better with general movie audiences. In the case of the unique James Carpenter façade to the right, as featured on a retail portion of one the Hudson Yards buildings, the opposite proved true. A couple years back, I had the chance to interview the visionary designer as part of an international symposium on daylighting. When I asked him if there’s a specific profile in a client he looks for to grant him the freedom to pursue the intricate, yet functional kinds of signature façade treatments, the architect told me he tends to work with more institutional owners, but that doesn’t preclude him from working with developers. In fact, he believes his “crafted” systems, ultimately, stand for themselves, with the proof in the pudding being that if the building proves itself, “the developer will come back.” Cheers to intrepidness. —Jim Crockett
16
NOTEWORTHY
NOTEWORTHY
Utilities Under Pressure from DG
Insightful Open Office Survey
Distributed solar-plusstorage systems are beginning to force electric utilities—and their regulators—to rethink business models, according to a recent international survey of utility executives. Rapidly falling storage costs are beginning to make grid defection a real threat—95% of survey respondents say the number of consumers going primarily off-grid for their electricity will grow significantly in the next two years in this paradigm shift. Beyond 2025, 95% of surveyed execs said DG and storage-services could become profit centers.
As the debate over open offices continues, a Harris Poll survey, on behalf of Coldwell Banker Commercial Affiliates, found that 74% of U.S. adults are comfortable working in an open office if there are private spaces available, 73% agree if there is limited noise and distraction, and 66% are in favor if there is also a large meeting space. Of the more than 2,000 people surveyed, 63% believe that their office could better utilize its physical space; 59% would like dining options; 57% are interested in enough parking; 37% want to see outdoor lounging spaces. www.cbcworldwide.com
ARCHITECTURAL PRODUCTS
1905APPRD04.indd 16
LINEAR REPETITION
The horizontal rhythm of the wall simultaneously captures and compresses the activities of the sky and landscaped plaza.
ART IN ARCHITECTURE
West Podium Art Wall Opens James Carpenter Design Assocs. manage the incorporation of a carefully crafted and functional façade that manages daylight while looking spectacular. As part of Related Companies’ Hudson Yards 26-acre development on the west side of Manhattan, which is built over a working rail yard, James Carpenter Design Assocs. have crafted an art wall for 20 Hudson Yards, a large retail complex between two towers designed by KPF. The art wall specifically becomes the façade to the Hudson Yard Shops, and establishes the dynamic threshold for a public square where the Hudson River Park, the High Line and the Hudson Park and Boulevard intersect with the Culture Shed and Thomas Heatherwick’s “Vessel” sculpture. The rippled façade multiplies the presence of the sky and plaza intersected by the arcing passage of the sun. The 300-ft. long cable-net supports glass panels inclined to capture the sky and curved along
“If a building proves itself, developers come back. It helps that we’re cost effective, but in the end it’s all about detail and craftsmanship.” their top edge to capture the plaza landscape and activity below. The horizontal rhythm of the wall simultaneously captures and compresses the activities of the sky and landscaped plaza, reflecting a linear repetition of sky and plaza that echoes the rippled surface reflections of the nearby Hudson River. At times, the 90-ft.-high wall appears to lean back to absorb the western sky, while in the afternoon, the repeated image of the sun reflected in the wall’s curves, describes an arc reminiscent of the afternoon sun setting over the river.
05 . 2019
5/2/19 10:11 AM
product developments
ENERGY
PATHOGENS TREAD LIGHTLY
The air sanitizing luminaire can decrease levels of airborne particles while offering 3200 lm and using only 60W of energy.
HEALTH + WELLNESS
Air Filtering Light Fixture Lighting Science offers a new concept in LED luminaires that reduces airborne pathogens responsible for numerous illnesses. Cleanse is an easy-to-install, airsanitizing luminaire that decreases the levels of airborne particles in healthcare facilities, schools, gymnasiums and a multitude of public spaces. Cleanse helps prevent exposure to pathogens using a multi-stage, air circulation and sanitation system. Activated carbon and HEPA filters capture particulates, while UV LEDs (A+C) further clean and deodorize the air. This process achieves >99.9%
elimination rate among the most common airborne pathogens. Most standard 2-ft. × 4-ft. light fixtures may be replaced with Cleanse fixtures in as little as 15 minutes. Cleanse provides 3200 lm. while only using 60 W of energy; it is also available in a wide range of color spectrums to match existing environments, including Lighting Science’s alertness-enhancing GoodDay light. www.lsgc.com — Circle
396
Hidden Power Legrand’s Furniture Power Center collection now includes new Power Only units, designed to bring convenient power to hospitality settings. The new units are equipped with two to four traditional power outlets, ideal for quick upgrades that make it simple for guests and staff to access the power they need. These solutions easily fit into tables or nooks to add muchneeded power connections for small appliances, cleaning equipment, sconces and more. The units are easy to install for quick, convenient room upgrades; available in white, black or nickel, they blend seamlessly with existing décor. Legrand www.legrand.us
Circle
“This is another example of Schindler’s commitment to providing digital and urban mobility solutions to shape smart cities of the future.”
RISKS REDUCED
Schindler’s automated R.I.S.E. technology is developed to eliminate repetitive, physically demanding work of drilling multiple holes in concrete shafts to set anchor bolts that give greater precision when installing guide rails and significantly reduces safety risks in demanding working conditions.
CONVEYANCE
Self-Climbing Robot Schindler’s Robotics Installation System for Elevators, (R.I.S.E.), paves the way for greater automation and digitalization in elevator construction. With an autonomous and self-climbing robot, the R.I.S.E. prototype solution allows a safe, precision installation in high-rise buildings. Together, with the Council on Tall Buildings and Urban Habitats (CTBUH), Schindler will study the speed, safety and quality of the innovation on tall buildings. Schindler www.schindlerplan.com
Circle
05 . 2019
1905APPRD04.indd 17
394
395
NOTEWORTHY
AIA’s February ABI Stagnant After a strong showing in January, business conditions at architecture firms showed little improvement in February. With a national ABI score of just 50.3 (any score above 50 signifies growth) firms basically held steady from last month’s growth levels. However, scores for both inquiries coming into architecture firms and new design contracts continued to reflect healthy growth rates. With sustained improvement in inquiries for future projects, as well as new project activity, billings are expected to improve. February produced the highest ABI score for commercial/industrial firms in over a year, as it also was the lowest score for institutional firms in over a year.
ARCHITECTURAL PRODUCTS
17
5/1/19 3:22 PM
product developments
CONTRACT FURNISHINGS
NON-TOXIC LEATHER
EcoBalanza upholstered furniture pieces are FSCCertified Alder Hardwood, GOLS-certified organic Dunlop Latex, Certified organic wool, U.S.-grown organic cotton, 100%-VOCfree wood stains and adhesives, Non-toxic fabrics with GOTS or Oeko-Tex Standard 100 Certification, IVN–certified non-toxic fulllife leather.
Non-Toxic Furniture As the Exposome grows from an irritation for many to a health threat for some, designers can turn to furniture manufacturer, EcoBalanza. They specialize in natural and non-toxic materials and craftsmanship. Located in Seattle, every piece is made by hand with the finest materials, sourced locally whenever possible. After continually fielding requests for non-toxic and sustainably based furnishings, founder Aimee Robinson resorted to custom manufacturing the pieces for her clients herself, using only third-party certified, local, organic materials from environmentally and socially conscious companies, many of which are female-owned. All pieces are manufactured by hand, frames are guaranteed for a lifetime and the rest of the materials are biodegradable or recyclable. With discounts on larger orders, a robust trade program, and a master designer on hand EcoBalanza makes all-natural upholstery.
RECYCLABLE COMFORT
The hand-made results are pieces of furniture that exemplify style and comfort, with an emphasis on the environment, of course.
EcoBalanza www.ecobalanza.com
Circle
393
MATERIAL TRANSPARENCY
RESILIENCE
Shutter to Think TWO’s line of Weatherwell Elite aluminum shutters were used in this project, which have passed the Miami-Dade Hurricane Wind Tests. The shutters combine cuttingedge engineering with a design to produce a wind rated and security aluminum shutter with beauty and functionality. The collection unites design with utility in exterior shade screens. Blades are fully lockable in any position and frames are designed to conceal the internal blade rotation mechanism; no visible hardware or affixing makes this two-part aluminum shutter frame a sleek architectural detail. TWO
www.two-usa.com Circle 392
THE HATCH BATTENED
The shutters come in fixed, hinge, multi-fold, sliding or Bahama options, in bronze or walnut, as well as white.
18
ARCHITECTURAL PRODUCTS
1905APPRD04.indd 18
05 . 2019
5/1/19 3:27 PM
Circle 34
• 1905 ArchProd Ad2.indd 19
4/30/19 8:38 AM
product developments
STRUCTURAL WOOD
High-Tech Design with Local Materials Virginia Tech students create an emerging technology for wood construction. As part of an ongoing applied research project, students from the Center for Design Research (CDR) at Virginia Tech’s College of Architecture and Design explored and created an emerging technology for wood construction. Comprised of students and faculty, the CDR team devised a structure that combines local materials with high-tech digital design and fabrication techniques. Fabricated by a robot, the innovative structure uses computationally-driven manufacturing fused with traditional woodworking to explore how advanced design and fabrication techniques can be applied in resource-limited settings. Working with an industry partner like MASS Design Group, the CDR faculty and students intend to continue this groundbreaking work to apply it to cities in East Africa, Haiti and the U.S., to help to create sustainable, efficient structures that meet the needs of the community and enhance quality of life.
Emerging Technology
TECHNOLOGY
COLLABORATIVE DISPLAY
The display, a component of the Lo-Fab Pavilion deployed as part of the Design Biennial Boston, is the result of increasing collaboration between the CDR and the wood industry. It was funded by MASS Design Group with support from an Autodesk BUILD Grant.
STUDENT-MADE
Virginia Tech students produced all of the 3000plus components in the Developed Design Robotics Laboratory.
RETAIL
On Trend: Materials Seattle menswear shop incorporates unique elements to exemplify modern retail design.
THE BRIEF
EAMESNW is a new menswear shop located in the Fremont neighborhood of Seattle dedicated to elevating men’s apparel and sneakers in the Pacific Northwest. The goal was to design a modern shop that enhances its carefully curated offerings while incorporating unique design elements. SOLUTION
Best Practice Architecture’s team answered with custom lighting, custom casework, rich fabrics, natural plywood, raw concrete and recycled denim to highlight the detail of the apparel and shoes on display, while offering a comfortable and open environment for customers. The resulting space entices customers through the front door and expertly activates every square foot of the layout.
20
ARCHITECTURAL PRODUCTS
1905APPRD04.indd 20
CREATIVE FUNCTIONALITY
A mezzanine was added to accommodate storage, using the stair up as an opportunity to create a display. A custom plywood and steel desk was designed around the stair and mezzanine structure, and doubled as a display case for small wares.
05 . 2019
5/1/19 3:22 PM
Building Envelopes for the 22nd Century YOU DEMAND BEAUTY, ECONOMY & SUSTAINABILITY. SLENDERWALL DELIVERS.
Cliffside Park Towne Centre Cliffside Park, NJ Architect: Virgona & Virgona Precaster: Smith-Midland
HEALTHCARE • HOSPITALITY • INSTITUTIONAL • MIXED-USE • MULTI-FAMILY • OFFICES • SCHOOLS Closed-Cell Insulation
30 lbs. per sq. ft. composite panels, containing 2 inches of precast concrete, are significantly lighter than traditional systems, allowing for larger panels and lower structural and foundation costs Energy Code Compliant (hot box tested) factory-applied closed-cell foam continuous insulation meets all thermal and air barrier requirements Fire Code Compliant, ASTM E119 tested assembly containing NFPA 285 rated insulation, fire stops, and non-combustible components Stainless steel fasteners, molecularly-bound high-tech fiber and welded-wire reinforcement, wind-load tested to 226 mph Ready for drywall, integrated heavy-duty G90 galvanized steel stud framing equals fewer on-site trades and faster construction schedules A wide range of Class “A” finishes, colors, textures, forms and surface treatments
Precision Detailing
Optional factory-installed windows Optional H2Out pressure-equalized in-the-joint rainscreen caulking system
To view more projects, download typical details, or to request a quote, visit www.SlenderWall.com or call 800-547-4045.
Architectural Precast/Steel Stud Building Panels SLENDERWALL® is a product of Easi-Set® Worldwide, a licensor of precast products, with 70 licensed producers in 44 states & 10 countries. Manufacturing licenses available for qualified precast producers. A subsidiary of publicly traded Smith-Midland Corporation [SMID]. AP1-2019 Circle 35
• 1905fpArchProd Ad2.indd 21 Easiset Arch Products 2019 cliffside.indd 1
4/30/194:46:20 8:38PM AM 12/4/2018
product developments
BLUE ROOFS
No Chicago H2O Blues With a mandate to account for total building mass and footprint, and that held stormwater be released within 48 hours, the client required something special: a “blue” roof. Very near Lake Michigan in Chicago, Northwestern Medical Center faced several challenges in bringing a new campus building to life. Designed by Perkins+Will, the project involves a phased construction where a 14-story base building is presently under construction; a 20-story tower addition is planned for construction in five to 10 years. Since the project is built-out to all property lines there are no at-grade landscape areas, which presented a particular challenge given the city’s Dept. of Stormwater Management permit requirement that the project account the total building mass and footprint. Translation: 10,000 cubic ft. of stormwater detention was required. Further, city code required that this volume be released through the flow control drains within 48 hours. This challenge was met with the implementation of a pair of “blue roofs.” A creation of American Hydrotech, the detention system is a composite of materials and products that can hold, and slowly release, large volumes of stormwater. According to Hydrotech’s Richard Hayden, the blue roof lies below layers of pavers and vegetation, with drains that utilize an insert with an orifice to regulate the flow of water out of the drain.
BLUE ROOFING
Roofs with insulation and ballast displace water, meaning better drainage; the more boards and ballast, the more displaced. A flat deck will drain with enough water, due to gravity.
Water volume created by the orifice in the flow control drains requires a place to go underneath the pavers and garden roof. “Blue” roofs are created using Hydrotech’s Permavoid product, a structural plastic voiding component. The company has adapted this product for inclusion in their blue-roof assemblies. This 14-in. × 28-in. × 6-in. deep module has the ability to store nearly 0.5-cubic ft. of water per square ft. of roof area on a flat deck. It also serves as a base for the assemblies on top. To optimize the blue roof storage, the roofs on this building, explains Hayden, were constructed with flat, zero-slope decks.
BLUE ROOF COMPONENTS
Pavers on Tabs Plantings Growing Media Permavoid (Water Storage Unit)
Monolithic Membrane Surface Conditioner Approved Substrate
“The standpipe determines the maximum depth of the water accumulated in the blue roof; it also acts as a safety feature by allowing excess water to flow unrestricted into the drain when the blue roof is full.” CHICAGO INFILL NEEDS BUILDINGS THAT CAN HOLD AND DIVERT WATER
The Permavoid layer was covered in Hydrotech’s Hydrodrain drainage composite; three rows of 3-in. pavers were installed at the parapet to offset the buoyancy of the 7 in. of insulation below. Three rows of checker block units were installed in the leading edge of the garden roof assembly to reinforce the garden roof from the effects of wind.
22
ARCHITECTURAL PRODUCTS
1905APPRD04.indd 22
Permavoid
Styrofoam
Permavoid and styrofoam
Soil
Plantings STRONG FOUNDATION
Permavoid units arrive in pre-assembled panels consisting of nine units, and are quickly laid out on the roof deck. The units create a strong foundation for subsequent layers and are easy to cut to fit around the features such as skylights. www.hydrotechusa.com Circle 391
05 . 2019
5/2/19 10:11 AM
Wall Director
Altitude
Ouro
Pavilion
KFL3
Kim Evolution See us at LightFair Booth - 1425
www.kimlighting.com Copyright © 2019 Kim Lighting, a division of Hubbell Lighting, Inc. All rights reserved.
kl_Family_ArchProd_Ad_042319.indd 1 • 1905 ArchProd Ad2.indd 23
Circle 36
4/22/19 8:38 4:53 AM PM 4/30/19
product developments
LIGHTING
Germany’s First Net Plus-Energy Building Nestled behind large sycamore trees, the architecture of Freiburg’s new town hall catches the eye, be its oval shape, its intriguing glass façade intermixed with light larch wood slats on one side, or PV panels on the other. Inside, its LED lighting scheme helps with another story: the energy bottom line.
© HG Esch Photography
DAYLIGHT AND LIGHTING
With a diameter of around 10m, certain “rotundas” feature a central cylinder that houses a discreet private area flanked by circular consultation zones. Above each of these stations hangs a delicate lighting ring, suspended from the ceiling, which emphasizes the rotundas as islands of light in the hall.
Devised by DS Plan, in close cooperation with ingenhoven architects, Tropp Lighting Design worked with Austria-based lighting manufacturer Zumtobel to develop customized lighting solutions for a net-positive energy facility. Roughly 1000 daily visitors a day make their way to the town hall to the Public Service Center, where people can apply for official documents, and take advantage of the range of city services. But rather than be greeted by windowless corridors, individual offices have given way to a spacious hall in
24
ARCHITECTURAL PRODUCTS
1905APPRD04.indd 24
elegant white—flooded with light—that takes up the whole of the oval inner quadrangle. The eye is drawn upwards, first to the large skylights, and then to the wooden façade of the five office floors. Only then do visitors notice the four round service islands. With a diameter of roughly 10 meters, these “rotundas” feature a central cylinder that houses a discreet private area flanked by circular consultation zones. Above each stations hangs a delicate lighting ring, suspended from the ceiling, which emphasizes the rotun-
das as islands of light. At the same time, these rings illuminate workspaces without the need for any additional fittings. Glare-free LED light has been achieved thanks to a multi-layer luminaire structure incorporating a diffuser and micro-prismatic optics. The crucial increased CRI of >90 guarantees maximum light quality and color authenticity. To help provide optimal support for visual tasks in the biaxial offices with just one luminaire, it was also necessary to be able to install the solutions in the middle
of the axes of the office raster. Stepping up to this challenge, Zumtobel developed a 3-m-long fitting based on its LINCOR product, combining a slim crosssection of just 63 mm × 64 mm, with a light output of 11,000 lumens. A perfectly defined CCT of 4000K, and outstanding glare reduction—thanks to the mini-cell structure—ensure excellent light quality, while the 70-30 ratio of direct light onto the workspace and indirect illumination of the ceiling also has a noticeably positive effect. Brightness and motion sensors are integrated
VISUAL SUPPORT
To help provide optimal support for visual tasks in the biaxial offices with just one luminaire, it was also necessary to be able to install the solutions in the middle of the axes of the office raster. Stepping up to this challenge, Zumtobel developed a 3-m-long fitting based on the LINCOR light product.
into the luminaires for added comfort and, more importantly, added efficiency. Speaking of efficiency, the light level is permanently adjusted to provide the required illuminance of 500 lux on the desks—but only when it is really needed. If all the employees leave the office, the
luminaires are simply switched off: no users, no light, no waste. Achieving this blend of architecture, design and light to deliver the highest standards of well-being, design and energy efficiency have helped Freiburg Town Hall become Germany’s first net plus-energy administration building.
05 . 2019
5/2/19 10:11 AM
LOCKERS
NEVER LOOKED
SO GOOD
And they’ll stay looking this good for years to come— How? ASI’s locker door frame, sides and back are all manufactured from one sheet of solid plastic. The result? A unibody™ locker system with increased structural integrity that’s virtually maintenance free. Add to that, the highest quality hinges and latches in the industry. And only ASI offers the most comprehensive collection of storage solutions available anywhere. For more information, call 706.827.2720 or visit asi-storage.com Circle 37
• 1905 ArchProd Ad2.indd 25
4/30/19 8:38 AM
F E AT U R E
26
T R EN D L I N E S
ARCHITECTURAL PRODUCTS
1905APTRL05.indd 26
B U I L D I N G EN V ELO P E
05 . 2019
5/2/19 12:12 PM
F E AT U R E
B U I L D I N G EN V ELO P E
T R EN D L I N E S
Multifamily Hits New Peaks Greater efficiency, smarter design, even Passive House principles, are becoming new hallmarks in multifamily facilities, as the market grows green—sometimes literally, with vegetated decks. A key in all of this is a more prominent role for roofs as a whole. BY ALAN WEIS
05 . 2019
1905APTRL05.indd 27
AND
JIM CROCKETT
ARCHITECTURAL PRODUCTS
27
5/2/19 12:12 PM
F E AT U R E
B U I L D I N G EN V ELO P E
T R EN D L I N E S
According to Dodge Data & Analytics, at a national level, the volume of multifamily construction starts in 2018 was $212.4 billion, up 4%—a moderate rebound from the 2017 3% setback. Of the top 10 metropolitan markets, four (Boston, D.C., Miami and NYC) reported greater activity in 2018, while six showed declines. For areas ranked 11 through 20, seven reported gains, while three reported declines. “The brisk expansion for the economy during 2018 enabled market fundamentals for commercial building and multifamily housing to strengthen,” says Robert A. Murray, chief economist for Dodge. “This provided the backdrop for the healthy volume of commercial and multifamily construction starts.” 2019 may not fare as well, says Murray, as benefits of tax reform on economic growth are expected to wane, and bank loans become tighter. But beyond volume, the market is starting to show—perhaps as the result of a more selective clientele—a degree of evolution from standard fare. Following are a few trends starting to impact multifamily design.
STATE OF A MOVEMENT
Net Zero Rising According to the New Buildings Institute, the number of verified net zero energy buildings as of 2018, was 67, with 415 in the “emerging” category (not yet certified, or exploring a net zero outcome). This compares to 21 and 39, respectively, when NBI first started tracking these figures in 2012. California and Oregon account for half the buildings on the list, but net zero projects can be found in 44 states. Multifamily makes up about 16% of NBI’s building list; office represents 19%, and schools lead all markets at 37%. Among verified buildings, 80% of the stock is between 5000 and 10,000 sq. ft. However, in the “emerging” category, projects between 50,000 and 100,000 sq. ft., lead the category at 23%.
28
ARCHITECTURAL PRODUCTS
1905APTRL05.indd 28
© LBBA
New Ways to Live
Passive House Prevails Affordable passive housing is taking root in New York City. The 300,000-sq.-ft. Chestnut Commons project in Brooklyn will provide 275 affordable housing units to formerly homeless and low-income households. Designed by Dattner Architects and developed and operated by organizations with strong community ties—including Cypress Hills Local Development and MHANY Management— the design integrates
community and recreation spaces including a landscaped roof terrace, rooftop planting beds for vegetable cultivation, a satellite campus for CUNY Kingsborough Community College, a food manufacturing incubator, a credit union and a social services center. The 14-story building is being designed to PH standards and NYC Active Design Guidelines and is expected to achieve PHIUS pre-certification by mid-2019. Sustainable features include solar panels and
passive solar shading in the form of deeply recessed windows and projected solar shades at the eastern and southern façades. The building envelope is a combination of cast stone, exterior insulation and finish system (EIFS) and masonry cavity walls, and the backup wall consists of 6-in. steel studs with mineral wool insulation and exterior grade sheathing with a liquid-applied air barrier. The residential windows are highperformance casement uPVC assemblies with
steel reinforcement, and the fixed and operable glazing sashes use double-glazed insulated glass units that also achieve a high degree of acoustical performance. The masonry rain screen walls have 4-in. of XPS insulation, 1 in. of airspace and stainlesssteel wall ties, and the masonry relieving angles and window lintels are thermally broken and have cavity closure frames at the windows. Check out the March issue of Net Zero Buildings for more on this trend.
CHESTNUT COMMONS, BROOKLYN, N.Y.
Showing that passive and net zero design strategies can be done economically, the project not only includes renewables, but energy-recovering HVAC, controls, and means to collect data on energy use.
General
Passive House Standards
Building Orientation Form
Energy Recovery System
Energy Submetering
Continuous Air Barrier
Energy Management Systems
High-Performance Glazing
Low-VOC Paint
Minimize Thermal Bridges
Active Design
Apartments
Community Terraces
Individual Tenant Controls
Solar Panel Array
Energy-Efficient Appliances Water-Saving Fixtures Building Orientation Form
05 . 2019
5/2/19 12:05 PM
ADVERTISEMENT
Cincinnati Music Hall Opens with New Tune After Extensive Renovation A Cincinnati landmark with a rich and unique history recently received a total facelift, restoring the facility to the grandeur it displayed when it opened 140 years ago. Workers tackled a 16-month, $143-million project at Cincinnati Music Hall, which is the home of the Cincinnati Symphony Orchestra and several other cultural organizations, reduced seating capacity at Springer Auditorium from 3,417 to 2,263-2,524, depending on the configuration. The project included updates to the roof, exterior, Edyth B. Lindner Grand Foyer, Corbett Tower, Library and Ballroom. In all, the project added 31,549 square feet in the same footprint. “We’ve been in business since 1880 and take pride in our work on many of the iconic buildings in Cincinnati,’’ said Andrew Imbus, Project Manager at Imbus Roofing of Wilder, Kentucky. “This is a project that we are going to be proud of for a very long time.”
Photos: Courtesy of Imbus Roofing
Music Hall, which was recognized in January 1975 as a National Historic Landmark by the U.S. Department of the Interior, also serves as the home of the Cincinnati Opera, Cincinnati Pops Orchestra and May Festival Chorus. One of the most challenging assignments in the major remodeling effort was the roof. Imbus and his team had installed the previous roof in 1988. “It was worn, but still water tight,’’ Imbus said. “Some shingles were starting to blow off.” Imbus’ first charge was to find replacement shingles that mirrored those of the past roof to preserve the historical appearance of the building. The roof also required new double leaf smoke hatches, manufactured by The BILCO Company of New Haven, Connecticut. Imbus’ team installed seven DSH Automatic Smoke Vents. The vents, which measure 66 inches by 144 inches, are among the largest smoke hatches on the commercial market. The smoke vents include a Thermolatch® II positive release mechanism that ensures reliable vent operation when a fire occurs. The vents automatically release upon the melting of a UL-listed 165F fusible link, and a curb-mounted fusible link allows the latch to be easily re-set from the roof level. The vents are fully insulated and gasketed for weather tightness.
The vents are hard-wired to the fire suppression system and open electronically if the sprinkler system activates. Corken Steel, the local distributor of the smoke vents, and BILCO rep Joe DeFrain of Welling, Inc., worked with Imbus in procuring the roof hatches. The vents were installed above the main hall, Springer Auditorium, and are designed to open in an emergency to allow smoke and hot gases to escape. This allows better visibility and breathing conditions for audience members and performers to evacuate safely and aide firefighters in their containment efforts. “This was an important project for Cincinnati,’’ said Joe DeFrain, a BILCO representative with Welling, Inc. “It’s part of a revitalization of the entire community. Everyone in Cincinnati knows the Music Hall. We’re a third generation, family-owned company from Cincinnati, and we’re proud to have been a part of it.”
Keep up with the latest news from The BILCO Company by following us on Facebook and LinkedIn. For over 90 years, The BILCO Company has been a building industry pioneer in the design and development of specialty access products. Over these years, the company has built a reputation among architects, and engineers for products that are unequaled in design and workmanship. BILCO – an ISO 9001 certified company – offers commercial and residential specialty access products. BILCO is a wholly owned subsidiary of AmesburyTruth, a division of Tyman Plc. For more information, visit www.bilco.com.
Circle 38
BLC1372 Ad Prod AP May Cinci Music Hall_10.375x12.5.indd 1 • 1905 ArchProd Ad2.indd 29
3/13/19 11:40 AM 4/30/19 8:38 AM
F E AT U R E
B U I L D I N G EN V ELO P E
T R EN D L I N E S
Fenestration Factors As with Passive House projects, greater attention to the envelope, as a whole, is occurring in the sector. Not only does high-performance glazing and curtainwalls that check thermal bridging matter, but window placement is key. The distinctive Arborescence development below, about an hour from Montreal, is a great example, as its large and well-placed windows, in concert with narrow floor plates, allow for better daylight penetration, while the recessed nature of the windows, in concert with the roof overhang, address glare. The project also highlights another growing trend: steeply pitched, and standing seam roofs. Beyond a novel look, when skylights are added, the pitch allows for a much broader beam within. Secondly, standing seam roofs are a natural pairing for the incorporation of photovoltaic panels, such as seen on the net-positive home on the following page.
THERMALLY BROKEN
The glazing contractor and Kawneer collaborated to design custom receptors to bridge the larger wall sections, position thermal breaks, and provide proper structural support within the stud cavity.
THE PEARL, SILVER SPRING, MD. Designed by Baltimore-based Design Collective, The Pearl is a modern multifamily community providing occupants with a collective environment that draws upon nature, light, and luxury. It is comprised of three buildings, each featuring studio, one-, two- and three-bedroom apartments that offer occupants views of Rock Creek Park, in addition to an open courtyard, a rooftop farm for fresh produce, and multiple other amenities. Architectural grade NX-3800 Thermal Windows with structural mullions from Kawneer, create a sturdy and reliable window wall appearance that enhance views, natural light and thermal performance through large floor-to-floor window spans.
ARBORESCENCE, BROMONT, CANADA Canadian developer/builder KnightsBridge, along with ABCP Architecture, have launched Arborescence, an environmentally responsible, four-season residential development about an hour from Montreal, which features a series of condominiums located directly on Bromont Mountain’s Kamloops Trail. The development is aiming for LEED certification, overall, and will be built in various phases, for a total of approximately 260 units. The first phase involves 48 units designed in a streamlined Scandinavian architectural motif. Each unit is built with natural materials, and for greater daylighting, feature 9- to 15-ft. ceilings, and expansive windows that put the focus on nature—but also let in significantly more natural light into the spaces.
30
ARCHITECTURAL PRODUCTS
1905APTRL05.indd 30
05 . 2019
5/2/19 12:05 PM
Defining Natural Spaces
Marmoleum splash 3432
The natural beauty of a CO2 neutral floor covering Made from natural, renewable ingredients Naturally phthalate and plasticizer free Large selection of beautiful colors inspired by nature Versatile in application, durable in use View the NEW collection today at www.forboflooringna.com with
creating better environments
1-800-842-7839 | info.na@forbo.com
Circle 39
• 1905 ArchProd Ad2.indd 31
4/30/19 8:38 AM
F E AT U R E
T R EN D L I N E S
Rooftop Roadmap As noted, vegetated roofs and decks are a major trend. That said, roof real estate is a major consideration, especially if there’s a desire for skylights or PV panels. “We currently exist in an age where builders are forced to balance multiple elements on a vegetated roof or any rooftop of a green-minded building,” says Brian Grohe, commercial sales manager with VELUX America. “Using just one positive impact solution, like PV panels, vegetated roof systems, pavers or a daylighting system alone, won’t allow you to fully realize your green-building potential. Rather, these products can and should be used in conjunction with each other for the best efficiency and return on investment.” Skylights, according to Eric Wanner, head of business development with Solar Innovations, provide benefits beyond the rooms and areas they are specifically focused on. “Not only can skylights brighten a room for individuals, but those above will find the glow that escapes from the room beneath, offering a transformative lighting experience unlike any other. Modern skylights also offer new paths of mobility, as with retractable and operable systems, they give access to more of the buildings than ever before.” Of course, every project is different, and every building owner is going to have different objectives for their rooftop real estate, notes Nick Smith, national account manager with ZinCo USA. “Instead of thinking of all available rooftop technologies as a competition for space, maybe it’s a better idea to frame the design objectives into usability and function. Through this lens, there will be less apples-tooranges comparisons being made between the various technologies.”
According to Amber Ponce with LiveRoof, it’s not just about maximizing space, but making it accessible. When mechanical equipment is used on the roof, for example, the manufacturer encourages permanent paver or stone paths to ensure that the plants are not damaged when the equipment requires inspection or maintenance. In addition, when planning for PV arrays, they usually recommend using them in conjunction with the green roof rather than in a separate area. “Vegetation has a cooling effect, which can enhance photovoltaic performance,” she explains. “In this case, we would support the design team in selecting plants in the areas which may receive more shading due to the photovoltaic panels.” And this can actually help out the panels, says Robbie Shannahan with Eco-Roofs. One of the advantages of vegetated roofs is their flexibility and versatility. “The cooling effect of a vegetative roof, when planted around and even under photovoltaic arrays, enhances their performance without detracting from the vegetated roof benefits,” she notes. And, selection of the right plants can allow a vegetative roof to be planted right around or even hide mechanical equipment.” Another advantage of a vegetative roof is its ability to serve as a “blue roof,” which can capture and store large volumes of stormwater for a managed release. “Elements that create a blue roof can be located either under a garden roof or underneath a paver assembly, like Hydrotech Ultimate Assembly,” explains Richard C. Hayden, Garden Roof Department manager with American Hydrotech. “This creates the detention function many projects need to achieve.” Blue roofs are not supposed to hold onto the water for too long; rather, they “detain” water for only a
certain amount of time. “This timing is designed to create space for the rain in the next storm.” The system is installed on a high-rise project in a dense area of Chicago—Northwestern University’s Feinberg School of Medicine Medical Research Center 2 project (see product development on p. 22 for more details on the system).
PITCH THE RIGHT ANGLE
Roof real estate is valuable, and must be carefully considered, particularly for net zero homes. Pitch of the roof also significantly matters, as skylights on a 35-degree roof allow considerably greater solar penetration in a space vs. a window on an elevation, as shown in this net zero home by Schworer Haus KG in Germany, featuring Velux skylights. According to Johannes Schworer, the roof can serve as a source of energy and light, really demonstrating the future of living “sustainable, comfortable and healthy.”
SAY YES TO INTEGRATION
On the campus of Loyola Chicago, this roof includes a large skylight, a vegetaed roof (by Liveroof) and a maintenance path; the lower shots show integration with mechanical and PV systems.
LiveRoof
www.liveroof.com Circle 390
32
ARCHITECTURAL PRODUCTS
1905APTRL05.indd 32
05 . 2019
5/2/19 12:05 PM
Any shape. Any environment. Anywhere. Technologically innovative, aesthetically sophisticated, and infinitely functional. From buildings, boats, and furniture to acoustic control, solar protection, and tensile or modular structures, our lightweight, durable and sustainable textile solutions meet the requirements of your project. There’s no limit to your imagination. Performance textiles for everywhere you are.
sergeferrari.com Circle 40
• 1905 ArchProd Ad2.indd 33
4/30/19 8:38 AM
F E AT U R E
B U I L D I N G EN V ELO P E
T R EN D L I N E S
Cladding + Rooftop Options ROOF IMPS
Kingspan is introducing three new roof panels: KingSeam, KingRib 3 and KingRib 5. The KingSeam panels provide the look of a traditional standing seam roof while delivering the benefi ts of an insulated metal panel. Its trapezoidal rib design protects against potential damage from foot traffic. KingRib 3 or 5 panels are more economical compared to fieldassembled high rib roof applications.
Kingspan
www.kingspanpanels.com Circle 389
DYNAMIC RAINSCREEN
Intercept RZR from CENTRIA is a high-performance rainscreen system that creates the option for sloped panel depth of up to 4 in. and integrates seamlessly with Intercept Entyre and Intercept LVLZ for dynamic aesthetics including dramatic wall relief and plane changes. Available in both horizontal and vertical applications, Intercept RZR panels can be specified in zinc or aluminum substrates and are offered in depths of 1.375 in. to 4 in. Panel lengths span up to 138 in. (aluminum) and 12 in. (zinc), and up to 48 in. (aluminum) and 32-in. (zinc) wide. CENTRIA
www.centria.com Circle 388
PLANNING CRITICAL
Two VELUX Pinnacle 350 Trapezoid Pyramids on the roof of the UMass Design Building in Amherst, Mass. Skylights, says VELUX’s Grohe, use only a small fraction of the roof area—typically 5% or less—but in order to get the most out of them, he suggests designing the layout before the rest of the rooftop elements, as spacing is critical to maximize lighting inside. (Below), a larger system from Solar Innovations. VELUX
www.veluxusa.com Circle 387
Healing Oasis
BRIDGING ERAS
The new High Street Residence Hall at Dickinson College, showcases modern student living inside, and a zinc façade in durable, distinctive and sustainable RHEINZINK cladding, on the outside. Designed by Deborah Berke Partners and built by Benchmark Construction, the residence hall also incorporates limestone, as well as other natural materials like mahogany accents and zinc. The combination of materials bridges historic formality and a modern appearance.
A healing garden on an interior courtyard of the Bay State Medical Center in Springfield, Mass., provides an oasis of sorts for patients. The fully accessible green roof, viewable from several different wings of the hospital, integrates intensive vegetated buildups with growing media depths exceeding 3 ft. directly adjacent to circular brick walkways. Both the hardscape assembly and the vegetated assembly use the ZinCo Floradrain FD 40-E element to maintain drainage.
RHEINZINK
www.rheinzink.com Circle 386
ZinCo
www.zinco-usa.com Circle 385
34
ARCHITECTURAL PRODUCTS
1905APTRL05.indd 34
05 . 2019
5/2/19 12:06 PM
YO U MIG HT CA LL IT GO ING TH E EX TR A MIL E.
W E CA LL IT TUESDAY.
At Williams, we treat every order like it’s the only order. A lifelong partnership and American-manufactured lighting products we’re proud to put our name on – that’s the Made Right Here difference. hew.com/MadeRightHere
• 1905 ArchProd Ad2.indd 35
Circle 41
5/2/19 1:05 PM
F E AT U R E
36
H E A LT H + W E L L B E I N G
ARCHITECTURAL PRODUCTS
1905APFEA03.indd 36
E D U C AT I O N
05 . 2019
5/2/19 12:50 PM
F E AT U R E
E D U C AT I O N
H E A LT H + W E L L B E I N G
all is wellbeing Health and wellness are shaping today’s K-12 designs with enhanced daylighting, IAQ, thermal comfort and acoustics. by Barbara Horwitz-Bennett, contributing writer
DESIGN & HEALTH
Driven by sustainable building programs, the push for Health Product Declarations and mounting research linking inferior environmental air quality to poor performance, today’s K-12 facilities are placing a greater emphasis on health and wellness. In order to create an environment that optimally promotes this, K-12 designers are prioritizing effective daylight/lighting, indoor air quality, thermal comfort and good acoustics.
05 . 2019
1905APFEA03.indd 37
ARCHITECTURAL PRODUCTS
37
5/2/19 12:50 PM
F E AT U R E
D AY L I G H T I N G
H E A LT H + W E L L B E I N G
Project: British International School of Houston Location: Katy, Texas. Design Team: Fanning Howey
COLLABORATIVE SPACES
© Fanning Howey/G. Lyon Photography
Daylight-filled townsquare-like spaces encourage movement and provide comfortable, collaborative areas at the British International School of Houston in Katy, Texas.
Targeting Daylighting Arguably one of the most important aspects of a holistic school building is high-quality daylighting. In fact, the World Green Building Council reports that in classrooms with good daylight, students attain 5% to 14% higher scores in tests and learn 20% to 25% faster than kids who work in windowless spaces. Looking at the big picture, Dina Sorensen, Assoc. , +, senior associate, who heads up the DLR Group’s Washington, D.C. K-12 education design studio, points out that designing to provide ample natural light, views to the outdoors and a variety of ambient atmospheres—while also reducing energy demand—is both an art and a science at the building scale. Ultimately, the goal of a holistic design is determining what end users require to effectively interact with their environment and tune it to meet these needs. “The best way to develop comfortable daylighting is as early as possible in the project, looking at building orientation and massing strategies,” instructs Emily Koch, , , +, project interior designer, LPA Design Studios, Houston. DLR Group likes to begin the integrated design process with very early shoebox energy modeling for quick simulations. “We also co-design with engineers to combine the best passive strategies with the most advanced active strategies, and strengthen the solution with a human-centered approach,” explains Sorensen. Part of this process involves considering a wide range of daylighting products very early on, from
38
ARCHITECTURAL PRODUCTS
1905APFEA03.indd 38
SHADING AND DAYLIGHTING
In classrooms with good daylight, students attain 5-14% higher scores in tests and learn 20-25% faster than kids who work in windowless spaces.
MADE IN THE SHADE
-World Green Building Council Report
building envelope products to fixtures, lamping and controls. “We tend to favor a combination of strategies that bring the most natural daylight into a space from multiple directions and supplement with a daylight control system, dimmable LED fixtures, tunable lighting and solar harvesting/solar tubes,” she says. In fact, tubular daylighting devices are quite popular for these K-12 applications, particularly where exterior glazing is limited or where the floorplate is too deep for the light to penetrate. With regards to shading, Koch asserts that window roller shades on the interior are a must, with a 1% to 3% open factor allow for occupant control of daylight and views. Meanwhile, Heather Jauregui, +, +, , sustainability specialist, Perkins Eastman, Washington, D.C., favors external shading devices. Her team also likes to utilize Rhino software with a DIVA daylighting plug-in to calculate natural light, in both instructional and non-instructional spaces, and to model the sizing and location of windows and skylights.
Mecho Shade Systems
www.mechoshade.com Circle 384
SolarTrac 4.0 merges predictive algorithms with realtime weather conditions. The software incorporates the sun’s precise position based on date, time, building GPS location and glass façade orientation—and calculates shadows and reflections from surrounding buildings—to automatically raise or lower window shades accordingly.
ON THE SHELF
Kawneer
www.kawneer.com Circle 383
At the Torah Academy in Metairie, La., Kawneer’s InLighten Light Shelf reflects sunlight deep into the floor plate. Available as a translucent polycarbonate or opaque aluminum composite panel, the light shelf is compatible with curtainwalls and storefront framing.
05 . 2019
5/2/19 1:06 PM
EXPERIENCE DAYLIGHTING DONE RIGHT GLARE FREE, MUSEUM-QUALITY DAYLIGHTING™ OUTSTANDING SOLAR HEAT GAIN CONTROL EXCEPTIONAL THERMAL PERFORMANCE ENERGY UPGRADES + RETROFITS SUSTAINABLE + RESILIENT MADE IN THE USA
CONTACT US TODAY AT KALWALL.COM
photo: Alex Upton
Circle 42
Discover the new face of thin.
A new way to add classic beauty... naturally. Add more beauty and value to your renovation or new construction project by choosing thin brick or thin rock from General Shale. Our thin products provide an ideal design solution for interiors and exteriors.
www.generalshale.com | Circle 43
• 1905 ArchProd Ad2.indd 39
4/30/19 8:38 AM
F E AT U R E
INDOOR AIR QUALIT Y
H E A LT H + W E L L B E I N G
Project: Tarbut V’Torah Community Day School Location: Irvine, Calif. Design Team: LPA
LEARNING OUTDOORS
Outdoor spaces enhance the learning environment.
OCCUPANT COMFORT
Ceiling fans are an effective tool to increase occupant comfort and enhance natural ventilation.
The next key prong in health and wellness is ensuring a high level of IAQ. “Indoor air quality has expanded its reach in critical understanding as being a number one global topic for human and planetary health,” reports Sorensen. “When it comes to schools, air quality’s impact on cognitive function has become of enormous interest.” A Harvard School of Public Health study, “The impact of green
© LPA
Pure Air buildings on cognitive function” found that workers in spaces with enhanced ventilation and low volatile organic compound (VOC) materials, in comparison to workers in offices with high concentrations of VOCs and artificially elevated CO2 levels, performed twice as high on cognitive tests. Encouraged by such research, DLR typically performs an environmental mapping analysis at the beginning of a project to
help identify integrated strategies informed by nature density and airquality research. The firm’s designs are also shaped by WELL, LEED for Schools and Living Building Challenge green building frameworks for monitoring and improving IAQ. “Selecting and specifying materials that limit exposure to VOCs, flame retardants and polyfluorinated compounds, and doubling down on removing fine particulates through
ENTRANCE FLOORING
DEBRIS RIDDANCE
Construction Specialties www.c-sgroup.com Circle 382
ARCHITECTURAL PRODUCTS
1905APFEA03.indd 40
Sharing Peter Basso Associates’ (PBA) general approach, Robert N. Roop, , +, K-12 group leader, principal with the Troy, Mich.-based // firm, relates that wherever possible, the designs strive to exceed code, for example, by carefully selecting air diffusion devices to
Workers performed twice as high on cognitive tests in spaces with enhanced ventilation and low-VOC materials compared to offices with high concentrations of VOCs and artificially elevated CO2 levels. —The Impact of Green Buildings on Cognitive Function, Harvard School of Public Health Study
provide good distribution and a high level of ventilation effectiveness. Meanwhile, LPA enhances air quality with operable windows and outdoor learning
spaces. “We try to keep the dirt outside through a series of walk-off surfaces that trap dirt in the entry area where it can be vacuumed,” notes Koch.
A BOOST OF FRESH AIR
Mondine
HVAC
Floormations protects the rest of the building from tracked-in debris. A supplied lifting tool removes the module’s top surface to vacuum build-up.
40
enhanced filtration, are paramount to changing how we harvest, manufacturer and utilize our limited resources,” explains Sorenson.
Interoperable with the school’s central chiller/boiler plant, Modine's Airedale Sentinel unit ventilator boosts indoor air quality in classrooms. Available in 30, 40, 50 and 60 MBH of cooling, the unit is designed to deliver the proper amount of fresh air.
www.mondinehvac.com Circle 381
05 . 2019
5/2/19 12:50 PM
DuraCoat-newLogo-Extrusions-ArchitecturalProducts.qxp_10.375x12.5 12/11/18 6:50 AM Page 1
High-solids spray coatings — the newest high performer from Dura Coat.
Extrusions never had it so good A P P L I E D
S C I E N C E
Now aluminum extrusion panels, kickplates, pole wraps, copings, fascias and cladding can have the same finish and protection as Dura Coat coil coatings.
DURA COAT PRODUCTS, INC. RIVERSIDE, CALIFORNIA (951) 341-6500 HUNTSVILLE, ALABAMA (256) 350-4300 www.duracoatproducts.com
DURA COAT’S NEW HIGH-SOLIDS PVDF SPRAY TECHNOLOGY SETS A HIGHER STANDARD FOR DURABILITY FOR YOUR ALUMINUM EXTRUSIONS. Durapon 70® HS high-solids spray coating shines in monumental and commercial applications such as storefronts, curtain walls, railings, trims and fascias. The premium two-coat primer and finish coating system offers exceptional aesthetics as well as outstanding protection against corrosion, fading and chalking and meets stringent AAMA 2605-13 certification requirements. ®
Green saves green Durapon 70 HS advanced formulation allows use straight from the container without additional solvent reduction. This full-measure packaging is kinder to the environment while cutting application time and reducing applied cost. Dura Coat’s proprietary resins, PVDF and years of expertise deliver a high-solids, super-smooth finish with superior dirt- and stain-resistance. With unlimited color choices, including metallics and exotic finishes, and superior protection from whatever mother nature dishes out, we have you covered. Call 951-341-6500 or 256-350-4300, or visit www.duracoatproducts.com for all your metal coating needs.
Circle 44
• 1905 ArchProd Ad2.indd 41
4/30/19 8:38 AM
F E AT U R E
H VA C
H E A LT H + W E L L B E I N G
Not too Hot, Not too Cold A study conducted by Harvard University’s Kennedy School of Government found that cumulative heat exposure inhibits cognitive skill development and that air conditioning in schools can mitigate this effect. The study, “Heat and Learning,” reported that without air conditioning, each 1°F increase in the school year temperature reduces the quantity of learning that year by 1%.
In order to efficiently deliver conditioned air, Nick Signorelli, principal, K-12 leader, Ashley McGraw Architects, Syracuse, N.Y., recommends displacement ventilation or chilled beams. With the former, conditioned air enters the room at its base, and is then exhausted up near the ceiling via a quiet, low-velocity supply and return system. With the chilled beams, induction-style chilledbeam terminals induce
the primary airflow from the central air handling units to flow across the cool coils in the beams, lowering the ambient temperature in the room. “Because the airflow is approximately one-third of that required by a
conventional HVAC system, we can use smaller ductwork—which, in turn, reduces installation costs,” he explains. On the other hand, LPA sees a central plant system or a VAV system as the most efficient
and long-term, costeffective solution as teachers prefer a thermostat in the classroom and the ability to open the windows. For children who spend time on the floor, radiant systems are a good fit.
“We have found great success utilizing either an in-floor radiant system, or radiant wall panels with low-average water temperatures of a dead-front panel to prevent student exposure to hot surfaces,” relates Roop.” Project: Samueli Academy Science Lab Location: Santa Ana, Calif. Design Team: LPA
FRESH AIR
Large operable windows boost daylighting and comfort at this Samueli Academy science lab in Santa Ana, Calif.
HVAC
INTEGRATED CHILLED BEAM
A two-in-one HVAC/lighting solution, the compact VENTUS LUX is 30% more energy efficient than conventional overhead VAV systems, and generally results in faster installation.
Titus
www.titus-hvac.com Circle 380
© LPA
Project: STEAM Learning Center at MacArthur Elementary School Location: Binghamton, N.Y. Design Team: Ashley McGraw Architects
INVIGORATED SPACES
Ashley McGraw incorporated daylighting strategies, such as clerestory windows that illuminate hallways. She selected low-VOC materials for this STEAM Learning Center at MacArthur Elementary School.
© Ashley McGraw Architects
42
ARCHITECTURAL PRODUCTS
1905APFEA03.indd 42
05 . 2019
5/2/19 1:08 PM
Hybrid Sweepstakes at AIA EXPO
Visit our booth #5916 at AIA Expo June 6 & 7 in Las Vegas to see our new products and enter the Hybrid Automobile Sweepstakes for a chance to win a new Prius
Wire Mesh Infill (Dazzle style)
Transform Spaces from Ordinary to Stunning with New DesignRail® Infill Options Introducing our new infill panels with distinctive designs and materials, specifically created for our DesignRail® aluminum railing systems. The panels can be used in interior and exterior spaces in both commercial and residential settings and can be mixed-and-matched with other DesignRail® infill options, including CableRail cables, pickets and glass panels, for almost limitless design possibilities.
STAINLESS STEEL MESH PANELS • All 316-grade stainless steel • Available in 4 wire mesh styles
LASER CUT ALUMINUM PANELS • Select from 9 designs or create your own! • Powder-coated in any DesignRail® color or custom colors
Laser Cut Aluminum Infill (Clover style)
RESIN PANELS • Available in 9 patterns, crafted with beautiful interlayers of embedded organic materials such as bamboo, leaves, and grasses
For more information call 1-800-888-2418 or visit www.feeney1.com
• 1905 ArchProd Ad2.indd 43
Circle 45
Resin Infill (Ginko style)
5/3/19 9:02 AM
F E AT U R E
ACOUSTICS
H E A LT H + W E L L B E I N G
What Did You Say? Of course, when selecting an HVAC system, acoustics are an important consideration, especially in learning spaces. As a baseline, PBA shoots for ambient noise levels at or below NC-30. “We generally utilize main duct velocities no greater than 800 fpm, branch duct velocities no greater than 500 fpm and air diffusion device neck velocities no greater than 500 fpm to minimize duct noise,” states Roop. When necessary, sound attenuators can be designed into main ducts. Compressorized equipment should be located above corridors, storage rooms or other
utility spaces, but not above occupied learning spaces, he adds. As for classrooms’ architectural surfaces, Herr recommends acoustic ceiling tiles and acoustic cloud and blade systems for the ceiling: perforated metal, wood panels or sound absorptive panels for the floors; and linoleum, rubber or luxury vinyl underfoot.
ACOUSTICS
ACOUSTIC AND AESTHETIC
With tiny 0.5-mm perforations, the Perfecto Micro Panel appears as a regular wood panel, making it an attractive way to control noise, sound reflections and excess reverberation. The Class A fire rated, recycled, ULEF and FSC-certified wood panel delivers a high NRC of 0.90, and is available in natural wood wall and ceiling panels.
When necessary, sound attenuators can be designed into main ducts and compressorized equipment should be located above corridors, storage rooms or other utility spaces, but not above occupied learning spaces.
RPG Acoustical Systems www.rpgacoustic.com Circle 379
TOUGH COOKIE
In addition to supporting good acoustics, sound-absorbing furniture can create islands for social collaboration which serve the dual purpose of enhancing privacy while still enabling students to “see and be seen,” relates Sorenson.
ColorArt Medintone (outside images), and its Spettro line of flooring (center), both employ the company’s Diamond technology coating.
Armstrong Flooring
www.armstrongflooring.com Circle 378
Project: MacArthur Elementary Location: Binghamton, N.Y. Design Team: Ashley McGraw Architects
BETTER ACOUSTICS
© Ashley McGraw Architects
Carpeting, sound absorbing materials and floating ceiling elements promote better acoustics for MacArthur Elementary School’s library.
44
ARCHITECTURAL PRODUCTS
1905APFEA03.indd 44
05 . 2019
5/2/19 1:09 PM
EXQUISITE PERFORMANCE. BROUGHT TO LIFE.
Bradley provides an unmatched range of commercial washroom products and solutions, like the award-winning WashBar,® available in custom basin options. With advanced design and cutting-edge performance, take your vision to the next level. Commercial washrooms brought to life.
HANDWASHING & DRYING I ACCESSORIES I PARTITIONS I LOCKERS
BRADLEYCORP.COM/WASHBAR/AP
Circle 46
• 1905 ArchProd Ad2.indd 45
4/30/19 8:38 AM
F E AT U R E
D AY L I G H T I N G
H E A LT H + W E L L B E I N G
BRING IN THE LIGHT
© Fanning Howey/Shelley Marie Images
At the Colonel Smith Middle School in Fort Huachuca, Ariz., solar tubes and light tunnels bring light into land-locked interior spaces.
Project: Colonel Smith Middle School Location: Fort Huachuca, Ariz. Design Team: LPA
Leading the Charge In the grand scheme of things, architects are strategically positioned to advocate for health and wellness for today’s school buildings. To be best equipped to rise to this challenge, Perkins Eastman regularly conducts extensive post-occupancy evaluations on all its work. “Through this research, we have been able to tweak and perfect every school that we design to be even better than the last,” relates Jauregui. Similarly, one of LPA’s mantras is “Prove it,” directing the firm to
46
ARCHITECTURAL PRODUCTS
1905APFEA03.indd 46
study how its projects are performing and following up with clients after they take ownership of the space to learn what is working and what can be done better. Overall, Sorensen emphasizes the importance of integrating the building sciences with human development and performance science. Along these lines, “DLR Group nurtures a research, education and practice function, and serves as a Think Tank toward creating new knowledge in topic areas such as IAQ research, student and
teacher engagement research, and a forthcoming platform for healthy, active schools.” Ultimately, Sorensen concludes, “we also need to forge new opportunities that make it easier for school districts to partner with researchers, policy makers and practitioners in education and design to facilitate a strategic whole school, and a whole community, whole child holistic approach to make health a priority for every member of their learning community.”
SEATING
DAYLIGHTING
ILLUMINATED LIBRARY
The Node chair is mobile and supports all the ways students learn. It’s designed for quick, easy transitions in the classroom. High mobility is a quality that translates directly into classroom performance, as a lesson plan can be carried out more effectively when seating is arranged effortlessly.
Steelcase
www.steelcase.com Circle 377
Slashing building lighting electricity consumption by 38% and earning LEED Platinum certification, 64 Solatubes and wall mounted diffusers pipe ample, balanced daylighting into South Whittier Public Library in Whittier, Calif. “Solatube daylighting systems are a beautiful and very opportune way to allow natural light into the building,” reports Vache Keledjian, capital project manager, LA County Libraries. “They help us save energy and in the long-run more people feel comfortable when they get natural light coming in as opposed to artificial light.
Solatube
www.solatube.com Circle 376
05 . 2019
5/2/19 12:50 PM
© R O B E R T B E N S O N P H OTO G R A P H Y
A N E W C L AS S O F M U LTI S LI D E
FOLD | SLIDE | SWING L AC A N T I N A D O O R S .CO M
O P E N S PAC E S ®
Circle 47
• 1905 ArchProd Ad2.indd 47
4/30/19 8:38 AM
new & improved
Faith, Hope and Patience In sustaining humanity, modern medicine often “alters” the state of the body; maybe it should be so with venerable buildings. Pardon this moment of melancholy, but as I ponder the shingles below, I can’t help but think of the tragic fire that destroyed the roof of the Cathedral of NotreDame de Paris, last month. I’m also thinking about how, in the renovation work that preceded the fire, more modern materials, methods and fire-protection measures might have helped mitigate the awful horror. I’m not the only one, as in the aftermath of the devastating conflagration, debate sprung forth
In the aftermath, debate has sprung forth about whether reconstruction should center on pure restoration, or, perhaps, crafting something new. about whether reconstruction should center on pure restoration, or, perhaps, crafting something new. Having been to the cathedral, and counting climbing to the top of the bell towers as one of the most memorable moments of my life, I actually stand with the camp suggesting something new might be the path to follow. It may be inevitable simply for structural and life-safety reasons, but there’s another reason: Hope. In the relief I felt when the fire was finally checked, and its treasures saved, I began to think that from this tragedy, perhaps, the community which loves this old building and what it stands for, can come together again. Indeed, I couldn’t help but remember the feeling I had in visiting Gaudi’s still-under-construction Sagrada Familia basilica in Barcelona—a feeling of joy, in that this project, 100 years in the making, draws in so many people, and creates a strong conviction among its visitors to see it completed; people are part of it. My hope is that something similar can occur in Paris. Of course, new with old can look wonderful. Immediately to mind comes the temporary Canadian Parliament project we covered in January. It, by no means, is near in maturity or grandeur as Notre Dame; still, hints of the Gothic, married with something more modern and functional, work in harmony—a goal for which we should always strive.
Jim Crockett Editorial Director
48
ARCHITECTURAL PRODUCTS
1905APNEW02.indd 48
GREEN GAS While gas stations aren’t typically the first thing to come to mind when someone says “green building,” a St. Louis area gas station challenges that perception. The ZOOM station’s unconventional-looking canopy over its gas pumps supports a two-way solar panel system capable of producing 109,000 kWh of electricity annually—enough to power most of the station and its convenience store and car wash. Manufactured by Prism Solar Technologies, the glass-on-glass solar panels can generate 35% more energy per watt than traditional modules via advanced bifacial N-type silicon cell technology that can generate electricity on both its front and back surfaces. The panels also offer exceptional performance in low light conditions due to the additional energy produced by its back surface. Circle 375
Prism Solar Technologies Solar Panels www.prismsolar.com
Kingspan Insulation
Kooltherm K20 www.kingspaninsulation.us
DaVinci Roofscapes
Select Shake www.davinciroofscapes.com
STUBBE HQ, HARLEY, ONTARIO A provider of architectural precast and ready-mix concrete, Stubbe, for its new building, wanted an R-value of 32 (in four in. of thickness), with exterior walls delivering an R-value of 35. A product that just launched as they were in design, Kingspan’s Kooltherm K20 Concrete Sandwich Board for tilt-up and precast walls, seemed heaven sent. “It gives an R-value of 34 in a reduced thickness, where most insulation gives an R-value of 5 per inch,” says Stubbe Project Manager Albert Meyer. The insulation, he adds, delivers an R-value of 14 in the same thickness. From a transparency perspective, it is made with a blowing agent that has zero ozone depletion potential. Circle 374
Kooltherm K20 has a closed-cell structure, so it keeps out moisture and water, is resistant to fungi and is very stable. The product has a fi ber-free core, enhancing its smoke development properties and fi re performance.
SHAKE IT UP Select Shake composite tiles offer the look of real, multi-width cedar shake in a longer-lasting material that resists fading, rotting, cracking and insects. Eight color blends are available, in 8-in. and 10-in. widths— with 10-in. shakes having the appearance of adjacent 4-in. and 6-in. shakes. Circle 373
05 10.2014 . 2019
5/2/19 12:17 PM
new & improved
© hortonphotoinc.com
With its cylindrical core and extending arcs, the museum almost appears to be in motion–a sense of movement reinforced by the running lines of the structure’s corrugated metal wall and roof panels.
THE MUSEUM BUILT BY GATORADE Gainesville, Fla., recently added an unusual new institution to its cultural landscape—the Cade Museum for Creativity + Invention, which is dedicated to both commemorating and inspiring the kind of innovation that built its namesake founder’s career. Dr. James Robert Cade is best known for inventing Gatorade, but his inventions stretch from football helmets to protein shakes. The museum’s design, by Baltimore-based GWWO Architects, features a circular core and extending arms that create a sense of motion. Corrugated metal panels clad the façade, complementing the high-tech image that’s at the heart of the museum’s mission. Circle 372
Petersen Aluminum PAC-CLAD www.pac-clad.com
In total, 11,400 sq. ft. of 22-gauge PAC-CLAD corrugated straight panels and 6,000 sq. ft. of PAC-CLAD corrugated curved panels were installed.
05 . 2019
1905APNEW02.indd 49
ARCHITECTURAL PRODUCTS
49
5/2/19 12:17 PM
new & improved
A GRAND ENTRANCE Joining forces with Baldwin Hardware, Kolbe’s selection of entrance door systems combines all wood/wood with extruded aluminum exteriors with stylish decorative hardware. Specialized combinations of wood species, glass and hardware afford designers a high level of creativity in crafting appealing openings. Circle 371
Kolbe Windows & Doors Entrance Door Systems www.kolbewindows.com
GKD
Acoustic Mesh Panels www.gkdmetalfabrics.com
DRAIN RELOCATION MADE SIMPLE A 2-in. horizontal outlet, Schluter’s KERDI-DRAIN-H takes the hassle out of drain relocation and avoids the expense of re-coring concrete. The outlet enables the new drain to be connected to the existing drain pipe. The drain includes the integrated bonding flange and is part of the complete Schluter shower system for constructing waterproof tiled showers. Owners can also take advantage of the compensation board to avoid the time and expense of pouring new concrete on the floor to accommodate the drain body and waste pipe height requirements. Circle 370
Schluter Systems KERDI-DRAIN-H www.schluter.com
Acoustic Mesh Panels have already helped a variety of spaces manage their sound while providing an extraordinary design, including the Kauffman Center for Performing Arts in Kansas City and Tonhalle Düsseldorf music planetarium in Düsseldorf, Germany.
Pinta Acoustics
WILLTEC www.pinta-acoustic.com
PANELS IN HARMONY Brasserie Bernard is a classic French brasserie in the heart of Outremont, a high-end neighborhood in Montreal, Canada. Owners of several popular restaurants, brothers Maurice, Paul and Richard Holder knew from experience that acoustics are an important part of developing an ideal atmosphere. To create a space that allows for comfortable communication, the brothers selected lightweight, WILLTEC direct-apply panels. In addition to providing acoustic benefits, the custom golden-yellow panels harmonize with the multidimensional painted ceiling and walls, and contrast with the black wood and leather banquettes. The WILLTEC custom panels are finished with a specially formulated water-based, golden-yellow acoustic coating. Circle 369
50
ARCHITECTURAL PRODUCTS
1905APNEW02.indd 50
A sag-free, 1-in. thick honeycomb support plate is layered with an intermediate blanket of fi ber-free acoustic fleece.
AESTHETIC AND ACOUSTIC GKD Metal Fabrics is taking its experience designing functional, aesthetic facades to interiors—controlling noise without compromising beauty. The interior aluminumbased panels were designed to improve poor workplace and commercial acoustic environments. The Acoustic Mesh Panels mute unwanted sound and environmental noise. They incorporate a sag-free, 1-in. thick honeycomb support plate, layered with an intermediate blanket of fiber-free acoustic fleece. This dampens noise to a sound absorption value up to AW=0.9. Circle 368
05 10.2014 . 2019
5/1/19 5:48 PM
WOODLAND COLLECTION
MOUNTAIN COLLECTION
MEDITERRANEAN COLLECTION
HANOVER
®
ARCHITECTURAL PRODUCTS
NEW Porcelain Paver Collections
URBAN
COLLECTION
With 5 beautiful collections to choose from, you’re sure to find the perfect match for your project! Hanover’s Porcelain Paver collections feature new colors and sizes only available from Hanover Architectural Products.
ISLAND
WWW.HANOVERPAVERS.COM
COLLECTION VISIT US IN BOOTH 6719 AT A’19 Circle 48
• 1905 ArchProd Ad2.indd 51
4/30/19 8:39 AM
new & improved
Ruskin
EME420DDE www.ruskin.com
THEY CAN HANDLE A HURRICANE The new EME420DDE 4-in. deep louvers—along with the 5-in. deep EME420DDE model—are designed to meet 55-mph impact tests, for applications in hurricaneprone regions. They have also earned Enhanced Protection ratings, qualifying them for use in such “essential facilities” as hospitals, jails, fire and police stations, and other buildings designated as emergency shelters. Circle
CHINESE INSPIRATIONS Inspired by the look of traditional Chinese paper lamps, the Lanterna fixture is available in three sizes and two colors—black or white. French designer Sam Baron incorporated a gold interior finish to the fixture’s shade to create warm, glowing illumination. Circle 367
366
Petite Friture
Lanterna www.petitefriture.com
Solid surfaces material is a great way to add functional style to interiors. Lit with accent lighting, patterns and textures stand out, while subtler slabs serve as a backdrop for other design flourishes.
Cambria
Woodstone, Black Marble www.cambriausa.com
Johns Manville
Mineral Wool Sound and Fire Block www.jm.com
INSULATE AND INNOVATE Johns Manville Mineral Wool Sound and Fire Block insulation provides a powerful (and yet quiet) 2-in-1. The insulation batts are noncombustible and moisture-resistant. The high-density fibers in mineral wool help delay the spread of fire and reduce noise transfer in interior walls and between ceilings and floors. The insulation improves wall assembly STC ratings by up to 10 dB, has a melting point in excess of 2000˚F and is made of durable inorganic glass, which translates into no growth of fungi and no sustaining of vermin. JM mineral wool is also easily cut, installed and fills the entire cavity for maximum performance. It is best used in wood-stud cavities and interior walls and ceilings between floors to deliver noise control. Circle
52
365
ARCHITECTURAL PRODUCTS
1905APNEW02.indd 52
RICH AND MOODY Cambria has just released nine new all natural stone designs. With this release comes the all-new Woodstone Collection and additions to the Black Marble Collection, epitomizing Cambria’s continual commitment to leading the way in stone design. The designs range in style from rich and moody to light and airy, and are inspired by both wood and marble. Circle
364
05 10.2014 . 2019
5/1/19 5:49 PM
the BUILDING ENVELOPE
SIMPLIFIED
Get the building envelope products and support you need from one trusted manufacturer.
GLASS WALL SPIDER FITTINGS GRS GLASS RAILING SYSTEM DRS DOOR RAILS
PROJECT: 8500 Melrose LOCATION: West Hollywood, CA ARCHITECT: Tighe Architecture © Geoff Captain Studios
AIA CONFERENCE ON ARCHITECTURE JUNE 6 - 8, LAS VEGAS BOOTH 6329
C.R. LAURENCE CO., INC. (800) 421-6144 ext. 17780 abd@crlaurence.com | crl-arch.com
518_04.19
Circle 49
518 8500 • 1905 ArchProd MelroseAd2.indd Envelope_Arch 53 Products.indd 1
4/11/19 8:39 4/30/19 8:43 AM
Acoustical Doors with a Bullet Resistant Rating
Keeping Classrooms Quiet and Safe
Laticrete
Multimax Lite www.laticrete.com
NEW MORTAR HOLDS ITS OWN Laticrete expanded its adhesive product line with Multimax Lite, a one-step non-sag large and heavy tile mortar available in both grey and white. It exceeds ANSI 118.15, the industry’s highest performance standard for a cementitious-based adhesive mortar and a 25-lb. bag provides the same coverage as a 50-lb. standard bag of mortar. It is GreenGuard certified and contains no silica. Circle
363
Students and teachers both thrive in learning spaces free of unwanted noise. Krieger’s acoustical doors enhance learning by exceeding the ANSI Standard S12.60-2002, and now they add safety to the classroom with an included bullet resistant rating. Plus, all Krieger doors are manufactured to your requested size, style, and finish.
Tarkett Citadel Architectural Products
Acoustical Rating
Bullet Resistance
STC 45 - 48
UL Level 1 & 2
STC 49 - 53
UL Level 3
FORM AND FUNCTION TAKE FLIGHT Inspired by air traffic maps, Tarkett has introduced two new lines of modular carpet tiles, offering new options for office, education and hospitality spaces. The designs could simplify installation in contemporary architectural designs where right angles and straight lines give way to open, multi-use spaces and curved walls. The carpet uses Tarkett’s Powerbond construction, with means it can be installed in any direction (even diagonally). The designer Jhane Barnes flipped and rotated repeating modules to create a large-scale pattern with no obvious repeat, creating an intriguing visual with minimal installation water. FlightPath contains 14 different matching points in its 22-ft. pattern repeat-that’s an opportunity every 19 in. for seams to align. AirSpace uses the same concept on a smaller scale. There are 24 hues in each of the three mix-and-match pattern options and are available in three sizes of planks and tiles. Circle 362
FlightPath, AirSpace www.tarkettna.com
Envelope 2000 www.citadelap.com
COLORFUL SOLUTION Designers with Missoula, Mont.-based In2itive Architecture decided late in the building process to punch up the color of the façade for a new medical facility in their hometown. The four-story headquarters for Consumer Direct Care Network now features more than 18,000 sq. ft. of Envelope 2000 composite panels in Regal Blue, Sky Blue and Silver Grey. Circle 361
Regal Blue, Sky Blue and Silver Grey
www.KriegerProducts.com
Circle 50
1905APNEW02.indd 54
05 . 2019
5/2/19 12:21 PM
Bicycle Storage Solutions
Circle 51
• 1905 ArchProd Ad2.indd 55
Bicycle Security | 800.448.7931 | madrax.com 4/30/19 8:39 AM
new & improved
STROLLING DOWN L’AVENUE Supporting the dark and clear curtainwall glazing defining the three vertical shafts running down the façade of Montreal’s L’Avenue mixed-use high-rise are AGC Energy Select R42 and AGC Solarshield tinted glass. Both complementing and enhancing the façade’s composition, the low-E glazing delivers highlight transmission and an aesthetically neutral reflectance while the Solarshield casts a gray hue. Inside are 304 new luxury apartments, an office area currently occupied by ‘WeWork,’ retail space, café and a grocer. Circle 360
AGC
Select 42 & Solarshield www.agcglass.com
© Stephanie Brugger Photography
Dörken Systems Delta-Dry & Lath www.dorken.com
David Weeks Studio
Treble www.davidweeksstudio.com
Federal Brace
Floating Vanity Bracket www.federalbrace.com
UNIVERSAL BRACKET FOR SINKS Taking the hassle out of meeting ADA requirements, the Universal Floating Vanity Bracket from Federal Brace can be installed on the left or right side with a large carrying capacity of 500 pounds per bracket. By mounting sinks no higher than 34 in. from the floor—with a knee clearance of 27-in. high, 30-in. wide, and 11-in. to 25-in. deep—the brackets support ADA compliance for applications such as hospitals, schools and restaurants. Circle 359
56
ARCHITECTURAL PRODUCTS
1905APNEW02.indd 56
TWO-IN-ONE MOISTURE CONTROL Combining a moisture-barrier membrane with fiberglass lath, the new Delta-Dry & Lath rainscreen system allows for faster installation and ensures better envelope performance over time in stucco and manufactured stone façades. The resulting rainscreen design enables quicker drying of any moisture that penetrates exterior cladding and reduces risk of façade staining or failure. Circle 358
BALANCED APPROACH The Treble collection includes pendant, sconce and standing lamp fixtures, all featuring the curvilinear form of a musical treble clef. The mobile pendant version, shown here, incorporates multiple tiers, each balanced to provide even illumination. Circle 357
05 10.2014 . 2019
5/2/19 12:21 PM
We’re Live
www.arch-products.com
Case Studies
Highlighting the products, materials, and systems behind the architecture. No other editorial source prioritizes the architectural solutions that are enabled by specification. Beyond the metrics—R-value, U-value, kWh—product choices can transform architectural spaces, and real-world ‘proof-of-use’ case studies offer insight into ‘proof-of-performance’ realities.
Advances
Stay current with the product, material and system developments that are shaping how we build. Brief, relevant, editoriallywritten and curated news items that keep you on the forefront of specification.
Browsability
Sort by product category, building type, company name, or trends such as energy efficiency, design & health, resiliency, material transparency and net zero buildings.
Updated Daily
Fully Responsive
New articles are added daily by our editorial staff and offer objective perspectives on realworld solutions.
Take us on the go with you. The website is now fully responsive and optimized for viewing on all of your devices.
Timely and relevant, our content follows the trends shaping the built environment. From resiliency, material transparency and design assist, to highefficiency and net zero buildings.
Follow Us
Be the first to know when the next digital issue goes live, get each issue’s editorial highlights, as well as links to exclusive content just by following us on Twitter: @arch-productsmag Circle 52
• 1905 ArchProd Ad2.indd 1903-Website Ad.indd 93 57
4/30/19 11:20 8:39 AM 4/29/19
new & improved
WONDER WALLS Formica high-performance wall panels feature a fiberglass core for added durability, strength and fire resistance. Dubbed HardStop Decorative Protection Panels, the wall treatment provides superior durability and ease of maintenance and installation. The panels are available in the full spectrum of Formica Brand colors and designed to be applied directly to a variety of substrates, including drywall. For seaming, a selection of anodized aluminum trims come in five profiles and colors, including clear anodized, champagne, light bronze, dark bronze and black.
Formica
Circle
Hardstop www.formica.com
356
BISON SUPPORTS
COMMUNITY AND A LOVE OF THE OUTDOORS...
Unlike laminates that contain paper cores, HardStop Panels are made of a fiberglass core, which help it earn a Class A fi re rating.
Carlisle-Syntec
Cav-Grip III www.carlislesyntec.com
architects: Lake|Flato and Shepley Bulfinch
photographer: Leonid Furmansky
REDEFINING ROOFTOPS CREATING ROOF TOP ENVIRONMENTS
AUS TIN CENTRAL LIBRARY (AUS TIN TX)
L E E D
P L A T I N U M
C E R T I F I E D
PEDESTALS Manufactured in Denver, CO and 100% recyclable with 20% post-industrial recycled material.
bisonip.com | 800.333.4234
WOOD TILES Constructed from
responsibly harvested hardwoods, sustainable, and available in FSC Certified species.
Circle 52
1905APNEW02.indd 58
FASTER ROOF BONDING Specifiers of EPDM membrane roofing now have a new adhesive option. Cav-Grip III Low-VOC Adhesive/Primer has recently been approved for use with the material. The product applies quickly with a spray gun in temperatures as low as 25°F, is VOC compliant and produces low odor. It offers labor savings up to 60%, compared to traditional bonding adhesive options. Circle 355
05 10.2014 . 2019
5/1/19 5:49 PM
Fireline™ Fire Barriers
With lives on the line there’s only one fire barrier you can trust. When disaster strikes, are you prepared? Our Fireline™ 140 Fire Barriers are not only expertly engineered to handle building movement even in seismic conditions, but are ready to protect in the unthinkable occurrence of a fire. Designed to block smoke, flames and heat, Fireline prevents fire from spreading, giving response teams more time to arrive and people more time to escape. Visit us at AIA (Booth #5116) to learn more about the Fireline™ 140 System.
Architectural Products inpro.com | 800.222.5556 Circle 53
Inpro-Arch Product - Fireline.indd 1 • 1905 ArchProd Ad2.indd 59
4/23/19 9:49 AM 4/30/19 8:39 AM
Quiet. Safe. Timeless.
ACOUSTIC CONTROL MEETS METAL DESIGN GKD MetalFabrics has created its own line of aluminumbased Acoustic Mesh Panels to help control noise without compromising beauty. The new technology was developed by incorporating research findings from a number of studies and white papers. The panels incorporate a sagfree, one-inch-thick honeycomb support plate, layered with an intermediate blanket of fiber-free acoustic fleece which dampens the noise to near silent at an AW value of 0.9. Lights, downlights and sprinklers are easy to integrate within the panels and they can also be removed and refitted easily which makes it a flexible sound solution for many architectural design needs that require sound dampening. Circle 354
GKD MetalFabrics
Acoustic Mesh Panels www.gkdmetalfabrics.com
Oldcastle
Mirage www.echelonmasonry.com
for commercial buildings of distinction, where aesthetics and advanced performance are critical considerations.
stcloudwindow.com
Circle 54
1905APNEW02.indd 60
800.383.9311
MODERN MASONRY DESIGN Oldcastle Mirage Porcelain Veneers Ardesie collection is available in four colors: Island, Black Reef, African Stone, and Shore. As with all Mirage colors, Ardesie coordinates with several items in the Belgard porcelain paver collection for mixing and matching to create a harmonious outdoor space. Mirage Porcelain Veneers, including the Ardesie collection, allows the designer to specify products from a moderate color pattern variation (V3) to a substantial color variation (V4). This offers design professionals the flexibility to select the style that best complements their design and delivers instant depth to a living space, commercial property or business setting. Mirage sets a new standard for modern masonry design with a high density and an ultra-low water absorption rate that creates a tight surface. The units are small and thin, at 4-in. wide Ă— 18 in. long (nominal) and with a thickness ranging from 0.3-0.6 in., making it a perfect option for vertical wall coverings for interior and exterior applications. Circle 353
05 . 2019
5/1/19 5:50 PM
LASER CUT METAL SOLUTIONS Architectural Metals for Exterior Facades, Columns, and Screens mozdesigns.com | 510.632.0853 | Oakland, CA
Circle 55
Available in Clear and 3 Colors Stack Bond or Running Bond Installation
Circle 56
DISCOVER THE SMART SOLUTION PLUS 877.738.3711 SEVESGLASSBLOCK.COM INQUIRY@SEVESGLASSBLOCK.COM • 1905 ArchProd Ad2.indd 61
5/2/19 2:08 PM
new & improved
Granada Tile
Echo Collection www.granadatile.com
DECORATIVE CEMENT TILES Granada Tile has partnered with award-winning designer Emma Gardner to add new patterns to their flagship Echo Collection of decorative cement tiles. Born in Kyoto and raised in New York City, she weaves diverse cultural strands into a unique voice. This collection embodies her signature style that is flexible in form and color, allowing for a broad range of moods—from serenity to exuberance. Gardner has received numerous accolades including Interior Design magazine’s Best of Year, IIDEX/Neocon Innovation and Neocon Gold Awards for her rug and fabric designs. Designers may play around with the colorways using the online customizer tool. Circle 352
SECURITY GLAZING
The Ideal Solution For School Protection
Hunter Douglas Architectural Techstyle Graphic www.hdarchitectural.com
Beyond aesthetic versatility, Techstyle Graphic panels feature a honeycomb design that absorbs both high and low frequencies to deliver superior acoustical performance across the spectrum.
CHILDGARD® security glazing is laminated glass constructed with a state-of-the-art proprietary security interlayer that is built to withstand extensive physical attack during a forced-entry scenario. It provides the aesthetics and daylighting advantages of glass, with an additional level of security. Benefits:
Typical Applications:
•
Tested to nationally recognized detention standards ASTM F1233-08
•
Entryway doors
•
Vestibules
•
Meets safety glazing standards
•
•
Installed following industry guidelines, no need for licensed installers
Classroom doors/sidelites
•
•
Can be installed in industry standard doors, framing, and window systems
Ground floor areas
•
•
For retrofit or new construction
•
Provides security while optimizing daylight
Monolithic and insulating glass units
To learn more about CHILDGARD® security glazing, visit CHILDGARDGlazing.com. childgardsales@cghinc.com • 866.412.6977 ext.114 GLOBAL SECURITY GLAZING A CGH COMPANY
Circle 57
1905APNEW02.indd 62
Watch our featured Inside the Blueprint, FOX Business Network segment online at CHILDGARDGlazing.com CUSTOMIZABLE ACOUSTICAL CEILINGS Hunter Douglas Architectural, a leading manufacturer of ceiling and wall systems, introduces Techstyle Graphic Customizable Acoustical Ceilings. Techstyle Graphic options for the ceiling plane were designed in collaboration with HOK and Guillaume Martin from French design firm, iwoodlove. Techstyle Graphic panels offer a selection of organic, abstract and geometric patterns that can be re-colored to fit the design of any room. When integrated into a creative room environment, Techstyle Graphics can induce calmness in a doctor’s office, produce excitement in retail settings, or add subtle wayfinding cues in a complex transportation hub. Circle 351
05 10.2014 . 2019
5/2/19 12:18 PM
PRECAST: THINK OF IT AS THE WORLD’S LARGEST CANVAS
Above: Viborg Provincial Archive; Vennershåbvej, Viborg, Denmark Architect: Schmidt Hammer Lassen Architects Below: Crevin Upper Secondary School; Crevi, France Architect: Jean-Francois Golhen Architecte
Graphic Concrete: It’s the new face of precast.
•
Graphic Concrete gives you the freedom to impart nearly any pattern, image or design onto resilient precast wall surfaces. The versatile technology transfers custom or stock graphics as a surface retarder via a membrane placed at the bottom of the precast form. After the concrete is cured and extracted from the form, the retarder is washed away, revealing an image that results from the contrast between the fair-faced (smooth) surface and the exposed aggregate surface. It is as durable and maintenance-free as concrete itself. You can select various aggregates and pigments to dramatically expand possibilities in the finished surface. Precast concrete has a new look. And it’s bigger and more beautiful than ever.
•
•
Circle 58
Available exclusively in North America from AltusGroup precasters. See projects, patterns and producer locations at altusprecast.com/gc
GC_ArchProductsAdCanvas_7.indd 1 • 1905 ArchProd Ad2.indd 63
4/26/19 1:03 PM 4/30/19 8:39 AM
new & improved
Simpson Strong-Tie
CSHP High-Performance Coiled Strap www.strongtie.com
COILED STRENGTH The CSHP high-performance coiled strap features a raised embossment that makes it easier to install using standard pneumatic nailers and provides increased rigidity and strength for higher allowable loads. The strap can be cut to length at the jobsite for a range of tension loadtransfer and positive-tie applications. Circle 350
A rechargeable solar LED lantern produces up to 500 lumens and 200 hours of light per charge.
Les Jardins
Wharf lesjardins.solar
Sloan Valve
CX Flushometer www.sloan.com
MINIATURE FLUSH VALVE Dubbed the industry’s smallest front access wall panel at nearly 70% lower than the industry standard, the CX Flushometer from Sloan can more easily be integrated into restroom designs. Freeing up space, with no need for a rear access plumbing chase, the product streamlines the installation process. The valve is compatible with 1.6 and 1.28 gallons per flush water closets and 0.5, 0.25 and 0.125 gpf urinals. Circle 349
Circle 59
1905APNEW02.indd 64
05 10.2014 . 2019
5/2/19 12:18 PM
new & improved
Daikin Applied
PreciseLine www.daikinapplied.com
WHERE COMFORT AND BUDGET INTERSECT PreciseLine affordably conditions air up to 5000 cfm, precisely matching a building’s air handling demand at an economical blower coil price point. Standard doublewall foam construction drives higher energy-efficiency and budget-minded lifetime performance, all while conditioning air for a larger space in a smaller package to meet a wide range of building designs. The standard direct drive 0-10V modulating fan motors keep comfort up and cost down. The same double-wall construction that improves energy efficiency also provides easy cleaning to minimize pathogens, contaminants and fiberglass strands. Circle 346
BEACON OF SUSTAINABILITY Les Jardins Solar Lighting’s Wharf is a rechargeable outdoor light source. It is nautical and rustic with a sculptural open frame that creates the illusion of dancing light. At just under 5-ft. tall, it has a commanding presence and airy design that casts intriguing shadows and patterns of light. Taking design cues from vintage woven fish baskets, the lantern’s cinched silhouette and entwined elements give it a sophisticated air and create a hauntingly beautiful effect when lit. Wharf’s basket-like frame is available in modern aluminum or all-weather wicker. Circle 348
Carl Stahl DécorCable I-SYS www.decorcable.com
SIMPLICITY WITH STYLE Stainless steel I-SYS cables, rods and hardware create minimalist balustrades offering needed protection without visual interruption. Available as custom orders or in preconfigured assemblies, the systems are maintenancefree, corrosion-resistant and fully recyclable. Circle 347
Booth #5238 05 . 2019
1905APNEW02.indd 65
Circle 61
5/1/19 5:50 PM
new & improved
DuChateau
Atelier www.duchateau.com
CRL-U.S. Aluminum 900 Terrace Doors www.crl-arch.com
The manipulation of wood through distressing, burning and smoking helps accomplish textures and patinas.
WOODEN BEAUTY FROM FLOOR TO CEILING DuChateau offers a full range of fine hardwood and vinyl plank flooring as well as hardwood wallcoverings sold through the DuChateau and Atelier series brands. The flagship hardwood series features eight collections engineered from European Oak, as well as European and American Walnut trees. The Atelier series is characterized by the extensive preparation of the materials, and manipulation of the wood with distressing, smoking and burning which helps to accomplish textures and rich, aged patinas that cannot be accomplished through traditional stains. Circle 345 TARGETING ACCESSIBILITY Enhancing accessibility, CRL-U.S. Aluminum has introduced a 0.5-in. low-profile threshold for its series 900 Terrace Doors to eliminate floor level protrusions and provide unobstructed passage, particularly for individuals requiring walking assistance. Thermally broken, the doors incorporate 1-in. insulating glass to minimize heat transfer and four-point stainless steel locking devices for single doors to maximize security. Circle 344
Shown: Atelier Series at the Business Club of Tijuana Infuse.
Mohawk
Sunweave www.mohawkgroup.com
MATERIAL TRANSPARENCY
Sunweave from Mohawk is a carbonneutral, red list-free broadloom carpet collection.
66
ARCHITECTURAL PRODUCTS
1905APNEW02.indd 66
SPREADING SUNSHINE Sunweave from Mohawk is a carbon-neutral, red listfree broadloom carpet collection that merges woven construction with today’s desire for artisanal materials, authenticity and warmth in contract spaces. Shadow Pass features a grand linear ombré shadow that transitions along the loom for dramatic installations. It derives its inspiration from the notion of shadows being nature’s handcraft as subtle color and value shifts mimic the sun’s daily progression. Circle 343
05 10.2014 . 2019
5/2/19 12:18 PM
FREEDOM
Connectrac Under-Carpet Wireway
TO PLACE POWER ANYWHERE Connectrac® Under-Carpet Wireways deliver power and data with an elegant and flexible, floor-based cable management solution unlike complicated and expensive methods such as core drilling, trenching or power poles. Our ultra-low profile wireway integrates with any furniture and can be moved or reconfigured as environments evolve.
®
freedom2design.com
1.877.480.5637 Circle 61
• 1905 ArchProd Ad2.indd 67
4/30/19 8:39 AM
new & improved
CLIMB EVERY MOUNTAIN Effectively simulating a natural outdoor environment thanks to Solatube Daylighting Systems, climbers are flocking to the indoor Mesa Rim Climbing and Fitness Center in San Diego. A combination of amplifiers, diffusers and daylighting systems are thoughtfully designed to throw light in different directions creating a natural depth perception. Circle
342
PRODUCT
Solatube Daylighting Systems Brighten Up Series www.solatube.com
Simpson Strong-Tie
RCKW & RCKWS Connectors www.strongtie.com
MORE OPTIONS FOR ANCHORING The RCKW and RCKWS rigid kneewall connectors have been redesigned to provide two anchoring options with the same connector. The new three-hole pattern enables a one-anchor solution at the edge or center of a slab, as well as a two-anchor option for stronger holding capacity at a slab’s center. Additional smaller holes allow attachment to structural steel with No. 12 self-drilling screws. Circle
68
341
ARCHITECTURAL PRODUCTS
1905APNEW02.indd 68
12 SkyVault M74 DS with Amplifiers, 25 SolaMaster 330 DS-O with Optiview Diffusers and 5 Brighten Up 290 DS Daylighting Systems.
ARCHITECT:
Joseph Holasek, NOAA Group
Patcraft
AdMix Encore www.patcraft.com
A V ENCORE AdMix Encore is flooring perfect for high-demand and heavy traffic areas. It features a seamless moisture barrier and solid resin construction that allows for scratches, scuffs and stains to be easily buffed. It can also be continually immersed in water with no degradation, making it ideal for areas that require frequent cleaning and large volumes of water for maintenance. It is available in 36-in. and 12-in. square tiles in 24 colors. Circle 340
Wolf-Gordon
Tone www.wolfgordon.com
ACOUSTIC WALLCOVERINGS Rich felt wallcoverings from the Wolf-Gordon + Mae Engelgeer collection are a digital print on felt with acoustic features. The structured patterning creates a cocoon-like environment for intimate and sophisticated conference areas, and the design suggests a subtle conversation about movement and rest. Circle 339
05 10.2014 . 2019
5/2/19 12:18 PM
specify performance, deliver beauty.
• NFPA 285 / UBC 26-9: Fire Resistance No special FR composition required. Standard composition meets requirements. • ASTM D5420: Impact Resistance Durable phenolic core provides greater protection than plate or polyethylene core. • ASTM D1929: Fire Resistance Meets or exceeds ignition temperature of nearly all competitive MCMs. • ASTM E283, 330, 331: Air, Water, Structural Passed standards with shop-fabricated and budget / time friendly field-assembled systems. • LEED MR 4: Recycled Content Helps contribute towards the effort of sustainable building practices. • 30-Year PVDF / 20-Year Anodized Long-lasting Kynar 500® finishes with cool technology or actual integral anodized metal.
ENVELOPE 2000 Metal Composite Material (MCM)
®
(800) 446-8828 • www.citadelap.com @citadel_mcm
Consumer Direct Care Network Location: Missoula, MT Representative: Tri-Jack Design Products
Circle 62
• 1905 ArchProd Ad2.indd 69
4/30/19 8:39 AM
Form
Inspired Product + Material Choices
Metal Panels
Roofing Systems
The building’s design employs massing and materiality to connect to the site’s historical context and proximity to the Front Range. On the sides of the building (not pictured), masonry and metal panels help connect to adjacent buildings. (AL Aluminum Plate Wall Panel HICI).
The building is capped with a Firestone UltraPly 60 Mil White Fully Adhered TPO roofing membrane, which not only protects the facility, but helps reduce the cooling load. The membrane meets California’s Title 24.
NorthClad
70
Firestone Building Products
ARCHITECTURAL PRODUCTS
1905APFRM02.indd 70
4/30/19 1:43 PM
Colorado School of Mines Located at the foothills of the Rocky Mountains, the Colorado School of Mines in Golden, Colo., has a backdrop few campuses can emulate. While many campus buildings are historic, the new CoorsTek Center for Applied Science and Engineering, named for the local and international ceramics manufacturer, shines as a modern visual centerpiece at the heart of campus, reflecting the research and sciences it champions. With its unique shimmery face, the center changes with the time of day to reflect the nearby quad.
Curtainwall EFCO
The northwest exterior, which fronts Kafadar Commons, the campus green, consists of full-height glazing at level 1, using the Series 5900 Thermal Curtain Wall with Duracast Fiberglass Pressure Plate.
“The vertical fi ns and texture, mullions and puzzle pieces—or portions that push in and out—are also reflected on the interior as a way to break down the façade while adding visual interest,” said Kirk Hostetter, senior associate, Bohlin Cywinski Jackson. “There was a concern about integrating with the scale of historical buildings on campus, and this was a way to break down the glass façade.” According to Robert Miller, principal at Bohlin Cywinski Jackson, in conjunction with architects of record Anderson Mason Dale Architects, it is the building’s many open spaces that have made it a new campus favorite. “There are places for people to pause, which creates cross pollination between students of different disciplines.” Miller says the Coorstek Center and its neighbor Marquez Hall— also designed by Bohlin Cywinski Jackson—have successfully created a “new campus standard.”
Vertical Fins EFCO Vertical metal fins complement vertical glass panels at levels 2 and 3, that float above, and modulate, as influenced by the building’s interior program.
ARCHITECTURAL TEAM
Robert Miller, Principal, Bohlin Cywinski Jackson, leader of the Seattle office for 30 years, has been recognized with more than 150 national and international awards and has been widely published.
Kirk Hostetter, Senior Associate, Bohlin Cywinski Jackson, joined the fi rm in 2006 and develops complex building programs, and manages the inherent intricacies of their systems.
PROJECT SPECS
Project: Colorado School of Mines, CoorsTek Center for Applied Science and Engineering Location: Golden, Colo. Owner: Colorado School of Mines Photography Nic Lehoux
Architect: Bohlin Cywinski Jackson Architect of Record: Anderson Mason Dale Architects General Contractor: FCI Constructors MEP Engineer: Shaffer Baucom Engineering & Consulting Structural Engineer: Martin Martin Consulting Engineers Photography: Nic Lehoux, Ron Pollard
ARCHITECTURAL PRODUCTS
1905APFRM02.indd 71
71
4/30/19 1:43 PM
Ceiling System The shimmering ceiling reflects the landscape and extends out of the building.
Hunter Douglas
© Ron Pollard
Linear Metal Ceiling hookon panel, Silver (No. 7163) and Accent Ac-410F, Brushed Anodized Finish, Torsion Spring Mount www.hunterdouglas architectural.com
LOBBY
“We really tried to open the entire fi rst floor up to the exterior landscape to maintain a connection to the green,” says Kirk Hostetter, senior associate, Bohlin Cywinski Jackson. “The staircase is a vertical cut through which the building brings light in from the top floor skylight and connects Physics’ spaces to the Applied Sciences, and all the way down to the general classroom level. The shimmering ceiling reflects the landscape and extends out of the building. Th is area doubles as a campus event space.”
Lighting
Flooring
Square ceiling lights dot the shimmery metal ceiling.
Tiles are suitable for indoor and outdoor use on walls or floors. They are suitable for high-traffic areas where slip resistance is important due to a textured surface.
Gotham
Pewter Matter Diffuse Evo Square Downlight www.gothamlighting. acuitybrands.com
Mosa Tiles
Quartz Series, Unglazed 12 × 24 in. Porcelain www.mosa.com
Ceiling System
Stairway
An extruded aluminum vertical blade ceiling system, the white slats to the left, create a linear plenum mask, while leaving an open plenum for HVAC and fire protection.
“The staircase is a vertical cut through which the building brings light in from the top floor skylight and connects Physics’ spaces to the Applied Sciences, and all the way down to the general classroom level.” Glass on the side of stairs is laminated glass with a frosted inner layer.
Gordon
12-in. Fin Mate Baffle Ceiling www.gordon-inc.com
Viracon
www.viracon.com
© Ron Pollard
Seating
72
ARCHITECTURAL PRODUCTS
1905APFRM02.indd 72
Wood seating: At the window that’s used as seatingSomerset Maple, Natural 5-in. T & G Planks
05 . 2019
4/30/19 1:39 PM
Bill & Melinda Gates Center For Computer Science & Engineering University of Washington Architect: LMN Architects Product: Custom Linear Open
ACOUSTICAL WOOD CEILINGS AND WALLS • 1905 ArchProd Ad2.indd 73
Circle 63
SEE THE NEW LOOK. RULONCO.COM 4/30/19 8:39 AM
SPEC LIST:
Ceiling Systems Hunter Douglas Linear Metal Ceiling hookon panel, Silver (No. 7163) and Accent AC-410F, Brushed Anodized Finish, Torsion Spring Mount Circle 338 Hunter Douglas V-Baffle Fins V-200 Circle 337 Hunter Douglas Tech Style E Circle 336 Gordon Fin Mate Blade Circle 335
Contract Furnishings Kewaunee Signature Series Circle 334 Kewaunee Enterprise Workstation Circle 333
© Ron Pollard
Glass + Curtainwall EFCO Series 5900 Circle 332
Flooring Systems
LABS
About the Views
Flooring
Contract Furnishings
“We had the unique opportunity in classrooms and labs to connect to the outdoor landscape. Why not give large portions of glass to these classrooms so students can see outside while they’re working? Deep sunshades on the south façade deal with the Rocky Mountain sun,” said Hostetter. “We kept the palette light, everything is painted white or light gray, since it’s really about the views here—and, of course, all the cool equipment.”
A vinyl tile flooring is ideal for commercial indoor use. Made from 40% recycled content with Environmental Product Declarations) indicate a product that has been third-party certified (Type III) with regard to life-cycle environmental impacts that conform to ISO 14025, 14040, 14044 and 21930.
Signature Series’ cabinets and Enterprise Workstations’ desks are from Kewaunee, a leader in the design, manufacture and installation of laboratory, healthcare and technical furniture products. Products include steel, wood and laminate casework, fume hoods, adaptable modular systems, moveable workstations, stand-alone benches, biological safety cabinets, and epoxy resin work surfaces and sinks.
GROUP ROOMS
Armstrong
Migrations BBT Ice White, 12-in. × 12-in. www.armstrongflooring.com
Ceiling Systems Hallway ceiling slats and light are Hunter Douglas, V-Baffle Fins V-200 and Prudential Lighting, Bionic Perimeter Flush LEDs. Inside room ceiling and lighting are Hunter Douglas, Tech Style E, White.
Kewaunee
Signature Series/ Enterprise Workstations www.kewaunee.com
Hunter Douglas
© Nic Lehoux
Group Learning
ARCHITECTURAL PRODUCTS
1905APFRM03.indd 74
Armstrong Migrations BBT Circle 330
Lighting & Controls Gotham Evo Square Downlight Circle 329 Prudential Lighting Bionic Perimeter Flush LEDs Circle 328
Exterior Panels/ Cladding NorthClad AL Aluminum Plate Wall Panel HICI Circle 327
Roofing Systems
www.hunterdouglas architectural.com
74
Mosa Tiles Quartz Series Circle 331
Some classrooms are media-intensive to promote active learning, while others are tech-workplacelike with open, dynamic environments meant to prepare students for post-college work life. Pictured is an unassigned study room. “The school didn’t want traditional classrooms,” said Hostetter. “They were much more interested in group learning and students collaborating in learning studios so the students become active in their own learning.”
Firestone Building Products UltraPly 60 Mil White Fully Adhered TPO Circle 326
Stair/Railing System Viracon Circle 325
Exterior Vertical Fins EFCO Circle
324
05 . 2019
5/2/19 12:25 PM
UNIQUE. DISTINCT. FACADES.
University of Texas - Tyler Architect: Smithgroup JJR Location: Tyler, TX
Dri-Design Metal Wall Panels offer virtually limitless possibilities of design within the same fully tested, easy to install, dry joint system. Additionally, the unique attachment method allows several variations to be used together, which can produce a truly customized look. The University of Texas in Tyler used varying depths of Shadow Series panels in combination with a custom wood-look Dri-Design soffit to create this beautiful façade. • No sealants, gaskets or butyl tape means no streaking and no maintenance for owners. • Not laminated or a composite material, so panels will never delaminate. • At Dri-Design, we have a strict policy of recycling and creating products that the world can live with. • Fully tested to exceed ASTM standards and the latest AAMA 508-07. • Available in a variety of materials and colors. • Non-combustible and NFPA-285 compliant.
616.355.2970 // DRI-DESIGN.COM
Come visit us at the AIA Conference on Architecture 2019 – June 6 – 7 in Las Vegas – booth # 4129
Circle 64
42610 ArchProd UT Tyler -Ad2.indd Architectural • 1905 75 Products.indd 1
4/4/19 8:39 3:53 AM PM 4/30/19
Function
Converging Architectural + Performance Goals
Unisphere A Clinical Success: United Therapeutics’ Unisphere is a functioning work of building science and applied environmental art, creating a new gateway for both the city and the campus.
United Therapeutics’ (Unither) Unisphere is the largest net zero commercial building in the U.S. A biotechnology company focused on the development of products to address the needs of patients with chronic and lifethreatening conditions, Unither, in planning the 210,000-sq.-ft. addition to its six-building campus in Silver Spring,
76
ARCHITECTURAL PRODUCTS
1905APFXN02.indd 76
approached the project, in the same manner as the development of one of its products. They identified a primary objective: build a facility to keep up the design and development flow of the company’s new products; second, create a building that would exemplify a new environmental theory to the structures of this genre; and third,
create a contemporary landmark for its campus that would also function as a gateway into downtown Silver Spring. “Unither views its buildings as physical manifestations of its values and its mission of saving lives,” says Jared J. Loos, AIA, PE, CEO of EwingCole, which combined its in-house staffs for architecture, engineering and interior
design, working on the project which spanned a seven-year period until its Sept. 21, 2018 opening. Elliptical in profile to mimic the shape of the universe, Unisphere operates at approximately half of the energy level than other office buildings in the D.C. region, fulfilling the company’s resolution that the structure be net zero, using the
energy that it produces onsite. “Every element, from the overall building form to the interaction between building systems, was evaluated against multiple options to optimize energysaving strategies,” Loos points out. The firm worked across all disciplines to develop viable solutions at every phase of the project.
”We met regularly with United Therapeutics to present our proposed solutions and receive feedback and suggestions on further developing these strategies. This integrated approach between owner and A/E team created a unified vision that we all understood and supported,” Loos indicated.
05 . 2019
5/1/19 5:39 PM
Building Façade and Exterior The building took on many shapes in early design as the A/E team used solar and shading studies to evaluate stepping and sloping the façade in various directions. The design solution was to taper the façade with horizontally oriented solar panels located above the vision glass on the south façade. PV panels double as sun shades to the vision glass, blocking high summer sun but allowing in low winter sun when it is desirable. The elliptical shape maximizes solar exposure by creating gentle changes in plane. Its axis was rotated from the city’s grid to align with cardinal directions, extending from east to west. “We evaluated the building’s solar exposure in Ecotect and PVSyst to determine the most productive locations for solar panels,” noted Jason Fierko, EwingCole’s director of energy management. The amount of rooftop equipment with space required for solar panels was applied to the design of a sloped solar tray approximately 20 ft. above the roof level that extends to the buildable limits. “In this way, it was possible to maximize solar production and to minimize adjacent building shading,” Fierko explained. Daylight modeling was completed in DAYSIM and imported into the Carrier HAP energy model. Nearly 3000 on-site photovoltaic panels are mounted onto the building’s façades or roofs.
“The building is an engineering marvel, and a beautiful one, in that it depicts its inner workings. The result is pretty amazing. There is no building quite like this. This truly is one of a kind. It sets a new bar for sustainability.” —Paul Mahon, executive vice president, United Therapeutics, at the opening of Unisphere, Sept. 21, 2018
CLADDING
SOLAR PANELS
SOLAR SCREEN
The building’s elliptical from created complex geometries requiring meticulous connections between materials and systems.
PV panels shade the vision glass in the high-sun, summer months; being below daylight panels, they do not interfere with light.
CENTRIA
SolarWorld
To reduce morning heat gain and glare, the east end of the building was converted to outdoor terraces, shaded by a perforated metal screen.
www.centria.com Circle 194
Jason Fierko is EwingCole’s director of energy management. He leads the fi rm’s sustainability group, Th rive@EC, which tackles super-efficiency projects, including net-zero energy designs.
PROJECT SPECS
Project: United Therapeutics Location: Silver Spring, Md. Architect, Engineer + Interior Design: EwingCole, Philadelphia
www.solarworld-usa.com Circle 195
EARTH LABYRINTH Passive energy saving strategies include the earth labyrinth constructed of formed concrete with recycled content. Natural ventilation occurs by low-voltage automated operators that open awning windows across the building.
Project Management: Stranx Assocs. Contractor: Whiting Turner Green Building Consultant: Atelier Ten EwingCole project leaders: Jared J. Loos, CEO; Jason Fierko, director of energy management; Gayle Lane, director of interior design; Angela Matchica, director of lighting design; Jennifer Wampler; Richard Garman. Photography: Halkin Mason Photography
05 . 2019
1905APFXN02.indd 77
ARCHITECTURAL PRODUCTS
77
5/2/19 10:26 AM
Passive to the Max As originally envisioned by Unither’s management, the Unisphere would achieve zero net energy with enough renewable energy produced on site to sustain itself over the course of a year (it delivers 1,175 MWH annually). The building was permitted to be only as large as could be supported by on-site solar production. The energy model was first created at the pre-schematic stage. Fierko and his team used multiple tools, including EPA’s Target Finder program, CBECS data, other net-zero building case studies and benchmarking of other United Therapeutics buildings to ensure that the verified energy usage aligned with the model’s projected consumption. ”The model was continually updated throughout design and construction with several hundred iterations performed,” says Fierko. “As more net-zero building data became available over the design phase, we continually benchmarked to ensure our goal was both challenging but achievable.” Passive energy saving strategies were selected for their durability, low-energy use and effectiveness. Daylighting strategies are integrated into the façade of the building with translucent, high-insulation glazing from 8-ft. above the floor to the ceiling. The façade is broken into modules within each level, with: translucent glazing at daylight panels; triple-glazed, low-e coated electrochromic awning windows at vision height; triple-glazed shadow box spandrel below vision glass; and an operable awning window below the access floor for natural ventilation. The electrochromic glazing automatically tints based on weather conditions. The building communicates its operations that generate 1.175 MWh annually, to occupants and passersby. For example, when the building is in natural ventilation mode, interior lights in key locations change color, and awnings open to bring in outside air. The ground, itself, is also used as a heat exchanger to reduce the heating and cooling demands of the building. Heating and cooling is done through a geo-exchange system with (52) 500-ft. deep wells tied to highly efficient water-towater heat pumps. An active chilled beam system provides cooling to the office spaces and utilizes one-third the amount of air as a traditional cooling system. Heating is supplied to the offices through a highly efficient perimeter heating system that relies on natural convection of air within the space. Total energy recovery on all air streams along with a super-insulated envelope is included to mitigate the effects of climate.
NOTHING TO MOCK A major key to success was the fact that United Therapeutics chose to invest in a full-size mock-up that spanned from the exterior to the atrium. Th is way, the team was able to improve construction assemblies, and evaluate multiple devices, saving Unither millions of dollars in change orders.
Application is pending for LEED Platinum certification. A post-occupancy evaluation will be conducted within 18 months of occupancy.
78
ARCHITECTURAL PRODUCTS
1905APFXN02.indd 78
05 . 2019
5/2/19 10:27 AM
Circle 65
• 1905 ArchProd Ad2.indd 79
4/30/19 8:39 AM
Interior Systems Interior finishes were selected not only for aesthetic qualities, but also their durability and recycled content, such as the carpeting, made from fish netting. Employees appreciate a high level of occupant control within their spaces: individual temperature controls with set point restriction to support the building’s efficiency goals. Active chilled beams and under-floor radiators provide heating and cooling to the office spaces. Operable windows let fresh air in during ideal natural ventilation periods. Ceiling fans within each office provide air speed control, while electrochromic glazing adjusts tint levels to eliminate unwanted glare and solar radiation. The HVAC systems utilize a MERV 13 filtration level to reduce particulate and densely occupied spaces, such as conference rooms, are provided with carbon dioxide sensing to ensure optimal air quality. Indoor materials are specified to be low or zero VOC to prevent off-gassing. A pool in the atrium doubles as a heat sink. Acoustic privacy was a concern in the semiopen office plan. Provisions for sound deadening ceiling panels and a noise-canceling system was included in the design.
80
DAYLIGHTING
ENERGY DIAL
During daylight hours, the building is expected to provide 100% of its instantaneous use plus a renewable export of energy to the local grid. To supplement this approach, a backup generator and uninterrupted power supply system is provided to ensure critical functions can continue within the building in the event of an electric utility outage.
All six fl oors of the atrium have glass façades facing the Energy Dial, a symbol of the relationship of those who work in the building with the building itself. Th e “Energy Dial” is comprised of light and reflective metal fi ns, recessed into the building’s interior shell. It reacts to real-time data from the building’s control systems.
ARCHITECTURAL PRODUCTS
1905APFXN02.indd 80
Lighting is fully dimmable and controllable by the occupant. Task lighting at the work surface, coupled with effective daylighting, reduces reliance on the artificial overhead lighting system.
05 . 2019
5/2/19 10:23 AM
Complete. Accurate. Dependable.
Thousands of CAD files in DWG and PDF formats, so you’re sure to find that detail you need. ARCAT.com provides the most comprehensive on-line resource for building product information. ARCAT has free tools for each phase and every member of your team. Enjoy the freedom on-line at ARCAT.com for FREE, and no registration required! TIP - add CAD or details to your search to get what you need even quicker!
CAD, BIM, Specs, SpecWizard® and much, much more!
www.arcat.com Circle 66
CAD Ad.indd 1 • 1905 ArchProd Ad2.indd 81
3/18/2019 10:09:15 AM 4/30/19 8:39 AM
specifier’s solution
Lighting
University of Iowa’s Music Renaissance The disastrous 2008 flood in Iowa led to the necessary closing of the long-standing Voxman Music Building at University of Iowa.
CHALLENGE
As a result of Hurricane Michael, school leadership knew that they had to completely relocate, as well as redo the entire building to better fit student needs. With $743 million in FEMA aid, the University of Iowa embarked on a mission to rebuild. As part of this reconstruction effort, the university hired Seattle-based LMN Architects and local firm Neumann Monson Architects to relocate and rebuild a new $189 million, state-of-the-art, Voxman Music Building in downtown Iowa City. Lighting design firm HLB Los Angeles was brought in to create a wellorchestrated, yet quiet symphony of light that would enhance the finished color palette and promote the functional needs of the students, staff and visitors of the 184,000-sq.-ft. building.
Iowa School of Music— Voxman Building Iowa City, Iowa Architect: LMN Architects, Seattle, Neumann Monson Architects Lighting Designer: HLB LA PRODUCT SPECS:
BeveLED 2.1 Color Select
USAI Lighting www.usailighting.com Circle 193 PROJECT SPECS
INFLUENCE
The Voxman building was envisioned to be a concrete structure that would resemble a bento box in which simple tones and a minimal color palette would be used. The rehearsal spaces were meant to be spaces of inspiration that also offered the most optimal lighting conditions for students to read sheet music and practice. In each rehearsal space there are sculptural kites hanging from the ceiling that are designed to swarm and cluster to assist with the room’s acoustical properties. The lighting that was to be interwoven into the space needed to highlight the architecture to inspire students during rehearsals. CRITERIA
The six-story music building is designed for resiliency, sustainability and acoustic performance. As a project defined by a dramatic interplay of volume and light, the lighting design demanded a high level of coordination and collaboration to provide viable solutions for large-scale design challenges. SOLUTION
USAI Lighting’s BeveLED 2.1 Color Select fixtures were incorporated into these spaces given that they provided the highest intensity with the strongest uniformity in these rooms. Another critical element that these fixtures provided are their level of hardware that wouldn’t be affected by the constant and intense sound waves produced in the rooms by student performers. The USAI BeveLED 2.1 fixtures’ sleek design, stellar hardware and light intensity didn’t take away from the space’s design, but rather offered precise lighting conditions that brought to life the Voxman building unlike ever before.
82
ARCHITECTURAL PRODUCTS
1905APSPS04.indd 82
MUSICAL REBIRTH
The rebuilding of the Voxman building included the goal to breathe life back into the interior through a unique design that would inspire students as they ready for performances.
05 10.2014 . 2019
5/2/19 12:39 PM
If it looks too good CONCEPTION to be true CONSTRUCTION
COMPLETION
Lowell Student Housing | Lowell, MA | Architect: Benoit Design Group, LLC, Worcester, MA | Distributor: Kamco Supply, Londonderry, NH | Installer: Classic Exteriors, LLC, Manchester, NH
More than a manufacturer,
our vast product selection comes with industry expertise and technical support. Above: Versa-Seam ™ in Slate Blue & Champagne | Corra-Lok ™ in Slate Grey
Allentown, PA | Mesa, AZ 800.468.1441 | www.atas.com Circle 67
• 1905 ArchProd Ad2.indd 83
4/30/19 8:39 AM
specifier’s solution
Concrete
Getting Back on Track with Style With a concentrated effort to revitalize the downtown of Cliffside Park, N.J., Park Town Centre—13 stories of rental apartments atop a two-story retail level—was eyed as a way to bring new energy into a tired business district. CHALLENGE
Find a more efficient and cost-effective structural façade system to complete a planned mixed-use development that ran into economic issues. INFLUENCE
Town officials in Cliffside Park, N.J., had big plans for revitalizing their downtown when they began assembling properties for a new, signature mixeduse development back in 2002. CRITERIA
The central location and magnificent opportunity for views across the Hudson River to Manhattan would seem to make the Town Centre’s site a no-brainer for a signature residential high-rise. But the area had, instead, languished, earning the designation of “redevelopment zone” when this project was first envisioned. Cliffside Park planners hoped the effort
would kick-start interest in the surrounding downtown district. The quick access to the George Washington Bridge would also provide a more affordable housing option than Manhattan. “The intent was that it was going to replace underutilized properties to revitalize the center of town,” says James T. Virgona, architect with Edgewater, N.J.-based Virgona + Virgona Architects and the designer of the project. However, just as the 3.3acre property was secured, the Great Recession put the project on hold. When it started up again, a new hurdle emerged: under-surface conditions including a base of extremely hard rock and a previously unknown underground spring. The latter forced the design team back to the drawing board, as it meant the entire project had to be raised by 4 ft. to 5 ft. Already leaning toward “classically inspired modernism,” Virgona doubled down on this approach as
the raised site began to resemble a plinth—the base of many traditional Greek and Roman columns. That plinth has taken the finished form of a broad public plaza, with a decorative fountain and surrounded on three sides by two stories of retail space. Virgona’s design incorporates a staggered-truss structural system that frees up interior space. Using floor-to-ceiling steel trusses in a pattern that alternates from floor to floor, this approach transfers the entire building load to exterior columns. “The structural system used about half the steel as a typical design,” Virgona says—though he noted the 13-story project still required more structural steel than was used in New York City’s Madison Square Garden. SOLUTION
SlenderWall assemblies, which combine an exterior architectural precast concrete panel with vapor barrier, closed-cell foam insulation and galvanized framing studs, provided significant labor savings. The panels’ unique M-shape also allowed for larger windows, giving future tenants even greater access to dramatic views of the Manhattan skyline. As is typically the case, the staggered truss system was paired with precast concrete plank flooring. The floor planks were fabricated with embed plates for connecting the SlenderWall exterior panels. This installation process was choreographed to such a degree that, according to Virgona, “the panel façade was being applied to the building even as the structure above was still being constructed.”
Park Town Centre Cliffside Park, N.J. Design Team: Virgona + Virgona Architects NATURAL STONE LOOK
Acid-washed and sandblasted finish options ensured both designer and developer would get the natural stone appearance along with extensive decorative reveals and projections they desired.
PRODUCT SPECS:
SlenderWall Exterior Panels in Acid-Washed
SlenderWall www.slenderwall.com Circle 323 PROJECT SPECS
84
ARCHITECTURAL PRODUCTS
1905APSPS04.indd 84
05 10.2014 . 2019
5/2/19 12:42 PM
Circle 68
• 1905 ArchProd Ad2.indd 85
4/30/19 8:39 AM
specifier’s solution
Daylighting
SHADING WITH DRAMATIC EFFECT
Automated shades use a sun sensor technology to lift and retract with the sun’s movement. In the evening, when the shades are fully lifted, the glass reflects sunsets, creating a naturally dramatic exterior.
Dancing in the Light Architect’s unique vision for arched window shading solution lights up Oklahoma City Ballet rehearsal space. CHALLENGE
Architectural elegance meets engineered precision at Oklahoma City Ballet’s new rehearsal space and dance school. Beautiful natural light takes center stage in the half-cylinder-shaped space, which was recently converted from an award-winning fitness center into The Susan E. Brackett Dance Center. To filter light and create a privacy barrier for dancers, automated shades were needed to create a unique shading solution inside the 26,685-sq.-ft. building.
half of the shades lift to meet in the middle, evoking a sun disappearing into the horizon. When the shades are fully lifted, the large-scale window’s glass reflects Oklahoma’s breathtaking sunsets, creating an exterior that is naturally dramatic. The Susan E. Brackett Dance Center, Oklahoma City Ballet Company and Dance School Oklahoma City Design Team: Allford Hall Monaghan Morris
SOLUTION
Architect Allford Hall Monaghan Morris selected Hunter Douglas Architectural’s RB 500+ automated shades featuring Mermet’s E Screen in 1% white fabric. At the arched window, 10 high-performance shades line the bottom while another 10 shades are angled along the top of the frame. These smart, automated shades use Somfy’s animeo sun sensor technology to lift and retract with the sun’s movement. The effect? As the upper angled shades lower, the bottom
86
ARCHITECTURAL PRODUCTS
1905APSPS04.indd 86
PRODUCT SPECS:
Hunter Douglas Architectural RB 500+ Automated Shades Screen: Mermet’s E Screen in 1% white fabric
Hunter Douglas
www.hunterdouglas architectural.com Circle 322 PROJECT SPECS
05 10.2014 . 2019
5/1/19 4:54 PM
NRP DÉCOR wall panels
RECYCLED. RECLAIMED. RESILIENT. Specify a beautiful wall panel that will past the test of time! High Performance Wall Panels Revolutionary panels featuring solid reclaimed polymer core with HPL or decorative laminate surface provide a logical alternative to traditional millwork and solid panels for commercial interiors where high performance, long service life and value are the key factors. NRP DÉCOR panels can fulfill most design requirements and are unaffected by moisture. They are extremely durable and easy to clean. The 100% recycled plastic core provides exceptional product life and green building credits. In high maintenance applications, such as corridors, schools, and athletic facilities of all kinds, NRP DÉCOR panels are an outstanding choice. Please call for samples and to discuss upcoming projects.
P.O. Box 339, 104 Yoder Drive, Middlebury, IN 46540 • Toll Free: 800.835.4110 • www.parklandplastics.com Circle 69
• 1905 ArchProd Ad2.indd 87
4/30/19 8:39 AM
specifier’s solution
Geothermal Contributes to Net-Zero Success When investors started planning the 2062-acre Whisper Valley sustainable, planned community east of Austin, Texas, one of their biggest challenges was to attract home builders to join the project and actually build the homes. CHALLENGE
SOLUTION
One of the challenges, explains Douglas Gilliland, managing director of developer Taurus Investment Holdings, was to convince home builders to do things a bit differently. “Builders have established construction practices. They’re used to doing things a certain way because it has always worked for them.”
All builders in Whisper Valley are required to hook up to EcoSmart’s GeoGrid, a 5-mile loop of underground distribution piping that links each home to a geo-exchange network, engineered and manufactured by REHAU, a global provider of hydronic technologies and a strategic partner in the Whisper Valley project. “It took a bit of time to figure out who was doing what,” says Dennis Ciani, head of marketing for Pacesetter Homes, an Austin-area builder that constructs about 500 homes per year, including most of the new homes in Whisper Valley. “But the geothermal loop was already in the ground and all homeowners had to do was tie into it, which turned out to be fairly easy to do.”
Whisper Valley incorporates a new business model in home building that consumers are demanding: net-zero energy capable homes selling at prices most consumers can afford—all in a planned community that itself is “sustainable.” INFLUENCE
EcoSmart Solution a subsidiary of Taurus Investment Holdings, brought together the technologies needed to make a zero-energy capable community of this size possible with affordable prices. The EcoSmart program combines an innovative GeoGrid, solar PV, high-efficiency Bosch appliances and Google Nest products to make the vision for communities like Whisper Valley a reality.
Builders were also required to adjust their floor plans to accommodate a geothermal heat pump to be located in each home’s insulated attic for maximum efficiency. As it turns out, Ciani says, “We didn’t have to alter our floor plans very much.” And when consumers learned that their heating and cooling capacity came mostly from the earth—and that the cost of the system was already embedded in the home price—“it became a major selling point.”
“Another selling point was reduced monthly costs of living through dramatically lower energy bills,” Ciani continued. “The sustainable technologies—the geothermal system, solar photovoltaic panels on the roofs and computerized controls in each Whisper Valley home—probably adds $15,000 or more to the price compared to similar conventional homes in nearby rural communities east of Austin,” he says. But when people consider the price of the home, they don’t always consider its monthly costs. In central Texas, where temperatures average above 90°F during the summer months and can dip below freezing during the winter, utility bills are an enormous monthly cost. Whisper Valley’s integrated geothermal and solar systems bring those costs down to next to nothing—a reduction of $150 to $300 per month in the overall monthly cost for homeowners. Whisper Valley residents also benefit from federal tax credits for both the solar PV system and the geothermal equipment included in their homes. Residents can expect a $7,000 to $10,000 tax credit, providing additional savings on their zero-energy capable homes.
LOWER UTILITY COSTS
In central Texas, where temps average above 90 degrees in the summer, utility bills are a considerable monthly cost. The integrated geothermal and solar systems can bring those costs down.
Whisper Valley Austin, Texas Design Team: Pacesetter Homes PRODUCT SPECS:
RAUGEO Heat Exchange
REHAU
www.rehau.com Circle 321 PROJECT SPECS
88
ARCHITECTURAL PRODUCTS
1905APSPS04.indd 88
05 10.2014 . 2019
5/1/19 4:54 PM
FUN AND FUNCTIONAL FLOORS FOR COMMERCIAL INTERIORS
Liquid Elements, Reflect Artist Series
Manufactured and installed, seamless, resilient floors offered in unique finishes, colors and one-of-a-kind handcrafted designs. From extraordinary lobbies to inspired meeting spaces, we take full responsibility for products and installation.
800.257.7953 | stonhard.com 100 0 East Park Avenue, Maple Shade, NJ 08052 USA © 2019, Stonhard Circle 70
• 1905 ArchProd Ad2.indd 89 2019 Architectural Products Full Page Ad Fun and Functional May.indd 1
4/30/19 8:39 AM 4/16/19 8:33 AM
specifier’s solution
Daylighting
Wing at Florida Mall Offers Sunlit Experience Florida’s Aventura Mall recently completed a new wing expanding the Miami-area retail destination by 315,000 sq. ft. to 2.7 million. Providing a sunlit experience with indoor conveniences, a custom, vaulted skylight was installed. CHALLENGE
CRITERIA
Opened in 1983 at less than half its current size, Aventura has grown steadily through the decades. The newest addition on the eastern edge was completed in March 2018. “Retail is certainly evolving and we’re always innovating to stay ahead of the curve,” explained Jackie Soffer, co-chair and CEO of Turnberry Associates, owner and managing entity.
With 2903 hours per year of sunshine and 62 in. per year of rainfall, the skylights bring the outside indoors without the inconvenience of precipitation or unwanted solar heat gain.
JPRA Architects served as the project’s architect of record, working with general contractor Plaza Construction Group and design architect Carlos Zapata Studios. Super Sky Products Enterprises manufactured and installed a 347-ft.-long, 96-ft.-wide, custom, vaulted skylight to crown the addition. INFLUENCE
According to Turnberry Associates, “Zapata’s guiding principles—connectivity, integration and transparency—are the hallmarks of the wing’s distinctive design, and complement Turnberry’s progressive vision. Everything is bathed in the sun’s rays filtering through a continuous skylight that hovers over the entire length of this modernist extension.”
SOLUTION
Supporting Aventura Mall’s bright, modern design, Linetec finished the skylight’s aluminum framing components in a Pale Oak color. Upholding the specified appearance and functionality, the durable, 70% PVDF resin-based finishes also complement the skylight’s high-performance Viracon glass to keep shoppers comfortable beneath the warm, Florida sun. Skylight manufacturer and installer, Super Sky, incorporated nearly 11,000 sq. ft. of Viracon’s VNE163 clear, insulated, heat-strengthened glass with white, 40% dot frit silk-screening and low-e coating. The 0.5-in. air space with stainless steel spacers improved the insulated glass units’ thermal performance for energy efficiency. The StormGuard enhanced PVB interlayer also optimized performance for large missile impact hurricane-resistance.
“Performance in coastal conditions also is one of the most challenging environments for aluminum,” says Linetec’s senior marketing specialist, Tammy Schroeder, LEED Green Associate. “Without proper precautions and finishes, corrosion to aluminum components can damage the building envelope’s structural integrity, leading to systemic failure. With skylights—especially those located in a region prone to high winds, tropical storms and hurricanes—structural integrity is critical to protecting both property and people.” To stand up to harsh coastal or corrosive environments, Linetec recommends the highest-performing organic paint coating meeting the American Architectural Manufacturers Association 2605 specification. This specification requires paint coatings to meet rigorous testing performance standards including more than 4,000 hours of salt spray, and heatand humidity-resistance. These 70% PVDF resinbased coatings also shield the aluminum against weathering, pollution and aging, as well intense UV radiation, attributes that contribute to long-term chalk resistance, gloss retention and color retention. CROWNING ACHIEVEMENT
Envisioned as a contemporary town square, Aventura Mall’s three-level wing incorporates a custom, vaulted skylight, which crowns the new addition.
Aventura Mall, Miami, Fla. Architect: JPRA Architects PRODUCT SPECS:
Linetec Aluminum Framing, Viracon VNE1-63 glass
Linetec
www.linetec.com Circle 320 PROJECT SPECS
90
ARCHITECTURAL PRODUCTS
1905APSPS04.indd 90
05 10.2014 . 2019
5/2/19 12:41 PM
Beautifully & Thoughtfully Lighting the Landscape Award-winning design by world-class designers, precision optics, advanced LED technology. We look at every aspect of outdoor lighting with fresh eyes. Find us at landscapeforms.com or contact us toll free at 800.430.6205.
Circle 71
• 1905 ArchProd Ad2.indd 91
DESIGN. CULTURE. CRAF T.
5/1/19 9:43 AM
specifier’s solution
Decking Products
A SHOT OF NEW LIFE
The boardwalks leading to the tower, and adjacent fishing pier, were worn and rotting so they were replaced with composite decking to reduce maintenance and increase longevity.
Wall Springs Park, Pinellas County, Fla. Engineering Team: Pirellas County PRODUCT SPECS:
MoistureShield Vantage with SolidCore Technology
Oldcastle APG
www.oldcastleapg.com Circle 319 PROJECT SPECS
Pinellas County Chooses Composite Decking Realizing that the boardwalks surrounding the tower and fishing pier were worn, park engineers chose to replace the decking for both the boardwalks and piers at the scenic Wall Springs Park in Pinellas County, Fla.
CHALLENGE
The 35-ft. tall observation tower at Wall Springs Park in Pinellas County, Florida, offers stunning views of the park and the Gulf of Mexico beyond. A regional gem, the tower and about 30-ft. of ramp leading to it were destroyed by arson in 2013. In the midst of an arduous five-year reconstruction project, park engineers realized the boardwalks surrounding the tower and the fishing pier were worn and rotting. They chose to replace the decking with composite decking for those areas to reduce maintenance and increase longevity. CRITERIA
“The original boardwalks installed in 2002 had begun to deteriorate and were becoming a safety hazard,” says John Linton. P.E., senior engineer, parks engineering and design, for Pinellas County. “We then changed the scope of the tower project to include new decking for the boardwalk and fishing pier so
92
ARCHITECTURAL PRODUCTS
1905APSPS04.indd 92
the whole area of the park would be updated and safe by the time the tower reopened to the public.”
they receive very little sunlight and are moist most of the day.
SOLUTION
“When we first built the boardwalks, the cost of composite decking was considered astronomical. Now, we’re finding the pressure-treated wood doesn’t hold up as long as it used to and we’re facing more frequent, costly replacements,” says Linton. “The longevity of the composite, as well as the reduced maintenance needs, have made it much more cost-effective.”
MoistureShield Vantage is an uncapped wood composite board with a matte finish that evokes the look of real hard wood. “The color is consistent throughout the board and it cut just the same as wood—even better because it didn’t splinter when cut,” says Linton. “And, with wood-grain texture on both sides, contractors didn’t have to worry about which side they were flipping up.” Additionally, MoistureShield’s SolidCore technology runs through the entire board to ensure protection without a cap. There’s no need for painting, staining and yearly repairs and Vantage is completely resistant to moisture, rot and warping. This was significant in Wall Springs Park because most of the boardwalks are in submerged swamp areas where
For longer spans required by commercial boardwalks, the 2 × 6 profile of Vantage was used for the decking. The boardwalks are 6-ft., 9-in. wide with an inside handrail. Linton points out Vantage was the only of the composite products they looked at that offered a 2 × 8 profile that could be used for the top plates on the railings. The rail system has a 6 × 6 post and 2 × 2 rails with galvanized metal mesh inset.
05 10.2014 . 2019
5/2/19 12:41 PM
YOU CALL ME RAIN. HYDROTECH CALLS ME OPPORTUNITY. ORDINARY ROOFS WASTE ME. HYDROTECH ROOFS LEVERAGE MY POTENTIAL. THE GARDEN ROOF ASSEMBLY. INTRODUCED OVER 20 YEARS AGO, PROVIDING: ®
stormwater management solutions: reduce - retain - delay extended roof longevity additional usable space full assembly warranty
Learn more today at hydrotechusa.com /power-of-rain
HELPING YOU HARNESS THE POWER OF RAIN
™
Circle 72
• 1905 ArchProd 10.25x13.5.indd 1 Ad2.indd 93
4/30/19 8:39PM AM 11/26/2018 4:40:23
product focus
Lighting + Controls 1
3
2nd Ave Lighting • Caliope
5
Contech Lighting • CY9 Series
Les Jardins • Melo
2
4
Lighting Science • Good Day&Night
1
Eureka • Verner
HIGH-OUTPUT OPTIONS
Lighting Science • Series A+ Par30 Gimbal Lamp
3
STATEMENT CHANDELIER
5
IT GROWS ON YOU
CY9 Series cylinder-style downlights from Contech Lighting are offered in five lumen packages, with outputs ranging from 4,000 lm to 8,300 lm, enabling design consistency throughout spaces with varying ceiling heights. Several mounting options are available, including a sconce design, and specifiers also can choose from multiple beam distributions and color temperatures.
At 80-in. wide, the Rococo-styled Caliope chandelier is meant to add a sense of old-world luxe to the largest spaces. It features 24 faux candlelights in an antique amber finish, supported by hand-forged, scrolled iron arms. A central downlight adds functional illumination to the upward, ambient light produced by the candlestick fixtures.
The Melo fixture extends from table-lamp height up to a 68-in.-high floor lamp—and the base can even be removed to create a pouf-shaped accent piece. It’s completely portable and wireless, being powered by a removable, solar-rechargeable LED light module that features a motion sensor and dimming capabilities.
Contech Lighting
2nd Ave Lighting
www.lesjardins.solar Circle 314
www.contechlighting.com Circle 318 2
HAVE A GOOD DAY–AND NIGHT
Good Day&Night troffers, in 2 × 2 and 2 × 4 configurations, allow users to adjust light settings according to the natural progression of the sun to support circadian wake/sleep cycles. The fixtures offer a color rendering index of 90+ across their full 2300K-5000K color temperature range and can be adjusted using a standard wall switch or the Lighting Science Wireless Switch for multi-spectrum and dimming. Lighting Science www.lsgc.com Circle 317
94
6
ARCHITECTURAL PRODUCTS
1905APPRF.indd 94
www.2ndave.com Circle 316
HIGH DESIGN AND HIGH OUTPUT Pairing a profile that harkens back to 1930s Art Deco design with a light output of up to 4200 lumens, the Verner pendant offers the best of old and new. The fixture can be stem- or cable-mounted, and the shade is available with a white interior finish and either black or white as standard exterior colors. 4
Eureka
www.eurekalighting.com Circle 315
Les Jardins
6 GIVE IT AN A-PLUS The Series A+ Par30 Gimbal lamp from Lighting Science’s Healthé line produces a crisp, white light at a spectrum of 480nm, the same found in natural daylight. The lamp’s optics allow for three beam angles for spot, narrow flood and flood applications, and the gimbal design enables precise positioning.
Lighting Science
www.healthelighting.com Circle 313
05 . 2019
5/2/19 10:19 AM
New Cap Styles! Litestick® The Litestick® measures just one inch in diameter but plenty of power in its 3W LED BKSSL® solid state system with 11/16” (17mm) lens opening for dynamic path lighting. • 3W LED BKSSL® solid state system • CCT 2.7K, 3K & 4K • Field serviceable/upgradeable
.com Visit us at LFI 2019 Booth #2911
AlumiNATION!
Cardinal Flood Light
TM
Powerful projection, three cap styles and hundreds of powder coat finish options, this floodlight is capable of enhancing any project! • Integrated BKSSL® Power of ‘e’ technology with Adjust-e-lume®. • 8W integrated solid state source (available in 2.7K, 3K and 4K) • Mounting available for both ground and wall applications
.com Visit us at LFI 2019 Booth #2911 Circle 73
• 1905 ArchProd Ad2.indd 95
4/30/19 8:39 AM
product focus
Conveyance
The SkyBuild elevator allows crews and tools to be moved around London’s Twentytwo site.
1
Mitsubishi • Diamond HS
2
3
Schindler • 3100 and 3300XL
Editor’s Note According to global market research and consulting service provider, Global Market Insights, the global elevator market will surpass $130 billion by 2025. Fast, efficient conveyance will become critical to mobility as urban populations explode.
1
AI GOING UP!
Diamond HS premium passenger elevators are designed to offer premium service while addressing passenger safety and comfort. The elevators for high-rise buildings include innovative technology and artificial intelligence systems that group passengers according to wait time, travel time, current car occupancy, energy consumption and building size. The elevators are also available with an optional destination-oriented allocation system (DOAS) that can reduce average waiting times by up to 30%. Mitsubishi
www.mitsubishielevator.com Circle 312
96
ARCHITECTURAL PRODUCTS
1905APPRF.indd 96
Otis • SkyBuild & Skyrise
2
LOW RISE
Schindler Elevator continues to expand their portfolio with the customer in mind, filling in market gaps. This particular expansion is of the traction MRL (machine-room-less) equipment in the Schindler 3000 series and is designed for low-rise applications. The new 3100 model is an optimized 3300 specifically targeted for the needs of two- and three-stop segments with a speed of 100 ft./minute, up to 3,500 lbs. capacity, and 54-ft. max travel. It is an advanced and affordable alternative to non-green hydraulic elevators. The recent Schindler 3300 XL model introduction further expands the 3000 series capabilities. The 3300 XL starts at 3,500 lbs., with general passenger configuration and extends up to and including 5000 AIA service configuration, includes increased speed of 200 fpm and 108-ft. max travel. It also includes additional decorative options and enhanced features such as vandal resistance, tall cabs, tall entrances and regenerative drives for an improved environmental profile.
3
SKY IS THE LIMIT
Otis’ SkyBuild elevator is on site at Twentytwo, an upcoming skyscraper located at Bishopsgate just minutes from the new London Liverpool Street Crossrail Station, this construction innovation facilitates the development of a high-rise in a densely populated, historic London neighborhood by allowing crews and tools to be moved around the Twentytwo site about eight times faster than a standard goods lift. The elevator’s unique hydraulic piston system enables the lift’s mechanical system to climb one floor at a time as the building rises. The SkyBuild elevators will conveniently transition to the company’s SkyRise elevators once construction is completed. Otis
www.otis.com Circle 310
Schindler
www.schindlerplan.com Circle 311
05 . 2019
5/2/19 10:19 AM
Visit these booths to enter:
‚
BOOTH
4521
BOOTH
5238
BOOTH
5735
BOOTH
5916
®
METALFABRICS
BOOTH
6107
BOOTH
6416
BOOTH
8109
BOOTH
8419
these are the best odds in vegas
win this hybrid. It’s the annual Hybrid Automobile Sweepstakes brought to you by Architectural Products magazine and our participating sponsors! While at the show make sure to register to win the most attainable big-ticket prize at the AIA Conference on Architecture 2019. Odds of winning last year were 1-in-400!
TO ENTER: Pick up an entry card at any of the eight booth locations during the AIA Expo. Bring to each booth for a punch validation. Leave completed entry cards with any sponsor for inclusion in the drawing held on Friday, 6/07/19 at 3:20pm.
2019 Toyota Prius C 48 mpg city / highway Battery regeneration during braking Partial zero-emission vehicle See complete Official Rules at www.cbmedia.us.com/pdfs/2019HybridSweepstakesRules051519.pdf. No purchase necessary to enter or win. Purchase will not increase your chances of winning. Void where prohibited. Sweepstakes open to members of the architectural design trade who are legal residents of the U.S., 21 years of age and holding a valid driver’s license except residents of AK, HI & PR. Sweepstakes starts Thursday, 6/06/19 at 9:30 A.M. and ends Friday, 6/07/19 at 3:20 P.M. Odds of winning dependent upon total number of qualified entries received. Display vehicles courtesy: Toyota of Las Vegas. Image: Courtesy, Toyota of Las Vegas
19 AP Hybrid Ad (AIA).indd 101
5/20/19 11:42 AM
product focus
Landscape
2
3
Wolf-Gordon • Sunbrella
Hanover Architectural Products • Washburn
LIKE A TREE
The structure, the stem and light evoke a tree and its protective, reassuring function. Miami is available in all the Urbantime colors: white, anthracite, black, red and green. 1
4
Diemmebi • Miami
Editor’s Note By 2050, 75% of the world’s population will live in cities. Last year, New York City began reexamining it’s zoning to ensure green spaces and parks are accessible and equitably distributed throughout the urban landscape. “The panel is about revealing cutting-edge practice and having a dialogue about the current thinking on how to elevate open space as a cornerstone of the rezoning process,” says WXY Architecture’s Claire Weisz. At the national level, the synchronous scope of the Green New Deal urges environmental justice, green spaces, clean air and water in cities for all Americans.
Louis Poulsen • Flindt Wall
1
MODERN SHADE
Diemmebi Urbantime’s Miami, designed by the Basaglia Rota Nodari Studio, is a single system that has a long vertical stem that fits into the center of the table. In painted metal, it is visibly light but robust, with a triangular (for the table version) or rectangular (for the bench version) covering. The three arms, open to 120 degrees, with white canopy to filter sunlight. Any commercially available light sphere may be fastened at the intersections of the arms. Diemmebi
www.urbantime.it Circle 309 2
COLOR FAST
Sunbrella upholstery textiles consist of multi-colored and geometric patterns: Segment, Tangram and Trilateral. From jewel tones to sophisticated neutrals, these three textiles offer a variety of colorways while standing up to tough outdoor environments with highly UV-stable pigments resistant to fading. Wolf-Gordon
www.wolfgordon.com Circle 308
98
ARCHITECTURAL PRODUCTS
1905APPRF.indd 98
3
MOUNTAIN TIME
A manufacturing plant in York, Pa. used 24 in. × 24 in. Washburn tiles in the Mountain collection of Hanover’s Porcelain Pavers. The outdoor flooring is anti-slip, weather resistant and capable of withstanding heavy loads. Quick and easy to install, they are resistant to acid, chemicals, mold and salt. Hanover Architectural Products
www.hanoverpavers.com Circle 307
4
SCULPTURAL ILLUMINATION
Danish designer Christian Flindt has created the stunning new Flindt Wall for Louis Poulsen. The versatile circular, wall-mounted fixture brings bold, sculptural illumination to indoor or outdoor spaces. Flindt Wall’s organic light distribution extends its elegant aesthetic, sending a gentle glow in multiple directions. Louis Poulsen
www.louispoulsen.com Circle 306
05 . 2019
5/2/19 10:20 AM
Photography by Nacása & Partners
Trade Show & Conference May 21–23, 2019 Pre-Conference May 19–20, 2019
REGISTER NOW LIGHTFAIR.COM
The connected future is yours
Philadelphia, PA USA Pennsylvania Convention Center
to discover at LIGHTFAIR® International 2019: the lighting and design industry’s source for all that is new and next. Where brilliant solutions in lighting, connectivity, design and integration will unfold in a synergy of light in life. In the unsurpassed resources of the world’s largest annual architectural
LIGHTFAIR® International LIGHTFAIR.COM
and commercial lighting event.
3990_Architect_10.375x12.5.indd 1 • 1905 ArchProd Ad2.indd 99
4/17/19 4/30/19 1:05 8:39 PM AM
C O N T I N U I N G E D U C AT I O N S E R I E S
S U S TA I N A B L E D E S I G N
Presented in cooperation with:
NEXT STAGE: SUSTAINABLE DESIGN Exploring the performance and material considerations of green buildings. Sponsored by: Guardian Glass, ASI Group, SlenderWall, Roseburg Forest Products, Mermet USA | By Jeanette Fitzgerald Pitts
The Continuing Architect (TCA) is an American Institute of Architects Continuing Education Service Provider (AIA CES).
COURSE DESCRIPTION
A growing knowledge of how construction impacts the environment and advancements in products’ performance and materials efficiency.
1.0 AIA LU/HSW
LEARNING OBJECTIVES
After reading this article, you should be able to: 1 Describe how low-e glazing with silver layers helps designers meet code-required thermal performance metrics in both hot and cold climates. 2 Explain how increasing the use of wood in the construction of commercial, industrial, health care and government buildings would significantly reduce the climate change impact of building construction. 3 Compare and contrast the material composition and production processes of types of yarn used to create solar shade fabrics and ways their performance at window and contribution to green building systems differ.
© Craig D. Blackmon, FAIA
4 Differentiate between architectural cladding products that determine thermal performance through prescriptive and as tested methodologies and select solutions that meet or exceed the code-required level of insulation. 5 Specify the best material for bathroom partitions and washroom accessories that satisfies specific green building design requirements.
TO RECEIVE AIA CREDIT:
• Go directly to: https://www.thecontinuingarchitect.com/ RFC0519 and login or enroll to take the test.
• You can also visit The Continuing Architect website
(www.thecontinuingarchitect.com) at any time and click the ‘Read for Credit’ banner to access the course and test.
• AIA Course No. RFC0519
B
uildings consume energy in three different ways; energy is consumed to create the various products and materials that make up the building; energy is consumed during the physical construction of the building; and energy is required to create a comfortable and functional interior, once the building is occupied. When the sustainability movement began in the 1970s, it was focused primarily on reducing the amount of energy necessary to keep a building operational. To that end, energy codes and green building rating systems were developed to help designers create buildings that operated more efficiently. Now, sustainable design is entering a new era, where the industry is demanding not only that the buildings be designed to be more efficient, but that proof is gathered to verify that the buildings are actually working more
efficiently. There is also an increasing level of interest in reducing the amount of energy consumed by the materials and products selected for a project. This article explores the performance and materials efficiency considerations as they relate to low-e glazing, architectural cladding, wood products, solar shading fabric, and the materials selected for bathroom partitions and washroom accessories. D E S I G N G OA L 1
ALLOW DAYLIGHT, MANAGE SOLAR HEAT GAIN
Connecting people to the outdoors by providing views and allowing daylight to penetrate a space has become a key tenet of sustainable design, especially as a growing body of research reveals the benefit of these exposures to the health, wellbeing and productivity of building occupants. However, there is a caveat. The inclusion of daylight and views must be done without undercutting the efficiency of the building or subjecting people in the interior to the discomfort that can be caused by glare and solar heat gain. This requires designers to do more than simply fill a façade with glass, they must equip that façade to manage the light and heat present at the window. Solar energy is dynamic and diverse. It contains visible light and infrared and ultraviolet radiation. The visible light portion of the sun’s energy can range
The McKinney & Olive building in Dallas, Texas, designed by Cesar Pelli, uses low-e glass to manage solar heat gain and create a striking and sophisticated façade.
in intensity from 10,000 footcandles (fc) on a bright sunny day, to a few hundred when overcast. Although infrared and ultraviolet radiation may pass into a building unseen, they can have a profound effect on the efficiency of the HVAC system and the comfort of the people inside. When infrared radiation is absorbed by carpets or furnishings, it transforms into radiant heat, which raises the temperature of the interior. When solar energy reaches a building façade, the façade can reflect it, absorb it or transmit it into the interior. Low-emissivity glass, often referred to as “lowe” glass, is designed to manage the amount of visible, infrared and ultraviolet light that passes through the glass and into a building, with the goal of allowing as much visible light as possible to pass through, while blocking high levels of the heat-creating infrared energy. Advancements in low-e coatings have improved the effectiveness with which the glazing is able to distinguish visible light from infrared and UV radiation, better protecting the interior from solar heat gain, while allowing it to be filled with daylight. Beyond better performance, a wider range of clarity, color and reflectivity options enable designers to achieve the
E D U C AT I O N A L A DV E R T I S I N G S E C T I O N
1905APCEU05.indd 100
5/20/19 12:54 PM
GLASS THAT
STANDS OUT EY Tower TORONTO, ONTARIO with SunGuard® AG 50 and SunGuard® SuperNeutral® 68
© Edvard Mahnic Photography
Making a statement in the Toronto skyline. See what’s possible™ with Guardian SunGuard® Advanced Architectural Glass for your next project.
Visit us at AIA: Booth #6907
©2019 Guardian Glass, LLC | GuardianGlass.com/EYTower
Circle 74
• 1905 ArchProd Ad2.indd 101 GIC-EYTower-ArchitecturalProducts-snipe.indd 1
4/30/19 8:39 AM 4/10/19 12:30 PM
C O N T I N U I N G E D U C AT I O N S E R I E S
performance they need with the aesthetic they want. The secret is in the microscopic layers of metal that are deposited on the glass. SOLUTION
LOW-E GLASS WITH LAYERS OF SILVER
The coatings applied to low-e glass feature several thin metal layers. Although each layer is less than 1/1000th of a human hair, they deliver sophisticated performance enhancements that allow the glass to transmit more visible light into a building, while reflecting a higher percentage of the infrared and UV radiation. The layers can also impact the color, clarity and durability of the glass unit. Of the various types of metals and oxides combined in a low-e coating, silver has a dramatic impact on the insulating performance of the glazing. There are low-e solutions referred to as single-silver, double-silver and triple-silver low-e glazing, with triple-silver glazing containing the most layers of silver within the coating and delivering the most energy-efficient thermal performance. Thermal performance refers to the amount of heat that is gained or lost through an insulated glass unit (IGU). There are several metrics used to quantify and compare the thermal performance of a glass solution. The solar heat gain coefficient (SHGC) refers to the amount of the sun’s energy that passes through the IGU and into the interior. An IGU with a SHGC of 0.27 will allow 27% of the solar energy to pass into a building, successfully blocking up to 73%. Lower SHGC values indicate that the glazing does a better job of preventing heat from being gained by exposure to solar radiation. There are triple-silver low-e coatings on clear float glass can offer SHGCs as low as 0.23. Before the triple-silver
innovation, designers were often required to specify glass with heavy reflective properties or a dramatic tint to get SHGC values that low. The U-factor is another metric that describes how well a window assembly insulates the interior by measuring heat gain or loss due to the difference in temperatures on either side of the IGU. Lower U-values indicate that less heat travels through the glass, making the window a better insulator. When creating a project to include more daylight in the interior, while reducing solar heat gain, it is important to explore the amount of visible light that will pass through the glass. This aspect of performance is referred to as visible light transmittance (VLT). A clearover-clear IGU without a low-e coating can achieve 85% VLT, meaning that 85% of the available visible light passes through the glass and 15% is reflected or absorbed. The high-end VLT that is available from a low-e product is roughly 75%. Another key metric is the Light-to-Solar-Gain (LSG) ratio, which compares the amount of visible light transmitted through the glass with the solar heat gain coefficient. A 2:1 LSG ratio can be achieved with low-e coatings, meaning that the glass can allow twice as much visible light to pass into a room than heat. Higher LSG ratios indicate that the window is more effectively separating the visible light from the solar radiation and blocking the heat-causing radiation from entering the space. Glazing with the triple-silver low-e coating can offer very low solar heat gain coefficients, on clear glass, and exceptional LSG ratios, which means that the interior of the building is filling with daylight and not with heat from absorbed solar radiation. DESIGN TIP
MATCH GLAZING PERFORMANCE METRICS TO PROJECT CLIMATE
Advancements in low-e coatings offer better management of solar heat gain and more aesthetic options in terms of the clarity, color and reflectivity of the glazing.
When selecting glazing for a project, designers often start with identifying the level of thermal performance necessary to meet applicable code requirements, either the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1 (ASHRAE 90.1) or an ASTM International Standard, which vary based on the location of the project. As a general rule, energy codes require that projects in the south be outfitted with glazing that has a SHGC value of 0.25 or lower. This helps minimize the amount of solar radiation that will pass through the glass and into the interior, heating it up and taxing the HVAC system. In northern cities, like Chicago and New York, the codes allow for higher SHGC limits, often above 0.3, because buildings in these climates can benefit from passive heating that occurs when solar radiation enters a space and warms it up during the winter. In fact, the codes for these locations often stipulate the U-value of the glazing, putting the emphasis on minimizing heat loss, instead of preventing heat gain. Triple-silver low-e coatings can offer designers the daylighting and thermal management solution that keeps solar heat gain low for projects in areas where the sun’s energy is more intense and minimizes heat loss through the IGU for projects in cooler climates.
© Edvard Mahnic Photography
D E S I G N G OA L 2
SPECIFYING A BUILDING ENVELOPE THAT PERFORMS AS DESIGNED
One of the biggest challenges facing designers as they work to create buildings that are more energy efficient is the reality that there is often a difference between the modeled performance of the building design and the performance of the constructed building. To that end, green building programs are beginning to incorporate elements that require proof of performance once the building is occupied. While these accountability measures are applauded in the sustainable design community, they place another level of responsibility onto the design team that requires the selection of fail-proof or proven products that can withstand the certain degree of chaos and unpredictability that is common on a construction site and then perform as promised once installed. The building envelope is a great example of an aspect of the constructed environment that can be designed to deliver the requisite level of thermal performance and then actually perform much worse. To understand how this happens, consider a commercial building envelope constructed from traditional architectural precast concrete. In the design phase, the designer probably referenced the thermal requirements for the building as identified in the applicable energy code, either the International Energy Conservation Code (IECC) or ASHRAE Standard 90.1. While there are important nuances to the mandates of each code, there are similarities in how both IECC and ASHRAE approach defining a requisite thermal performance for a building envelope. Both IECC and ASHRAE Standard 90.1 divide the United States into distinct climate zones, each with its own minimum thermal performance requirements. The code sets specific insulation requirements for the thermal envelope, depending upon the project’s climate zone and the type of walls, whether they are concrete masonry walls, metal, or framed in metal or wood. It also identifies requirements for building thermal envelope opaque assemblies in terms of the acceptable U-factor. The designer specifies a building assembly that is compliant with the applicable code, meeting the prescriptive R-values and U-values, and selects the desired cladding. During the construction phase, the building envelope, which consists of many disparate parts and pieces, is assembled layer by layer by different teams of workers. The frame is erected. Traditional precast architectural concrete panels, commonly 6 to 8 in.- thick, which will provide the exterior skin of
An architectural precast concrete cladding system includes the façade, moisture/air barriers, insulation, and is even available with windows and interior framing. © SlenderWall
E D U C AT I O N A L A DV E R T I S I N G S E C T I O N
1905APCEU05.indd 102
5/20/19 12:54 PM
Top 10 reasons why our customers choose SlenderWall cladding. How many of these will work for you? 1. A Turn-Key System – A complete one-source panelized envelope system, inside and out, from a 2” precast concrete exterior skin to an integrated heavy-gauge galvanized steel stud interior frame filled with closed-cell foam and ready for drywall. We can include erection, caulking, even factory-installed windows to complete a product engineered for new curtain wall construction, re-cladding, over-cladding, and even load-bearing projects. 2. Design Versatility – A vast selection of class “A” finishes and colors. Looks that mimic much higher priced stone and masonry products. Formed patterns, bump outs, reveals and detailing only limited by your imagination, including multiple finishes on the same panel. A good choice for applications from low-rises to skyscrapers, hospitals, hotels, offices, multi-families and more. 3. Structural Savings – At a composite weight of only 30lbs per sf (66% lighter than traditional precast) SlenderWall eases foundation, piling and structural needs, even crane requirements. 4. Speed of Installation – Larger panels, quicker connections, fewer weather delays, and an install rate of 2,000+ sf per day all lead to quick enclosure schedules. The integrated interior stud wall and insulation takes days off of project completion. 5. Reduced Site Impact – Off-site manufacturing with just in-time scheduling means less space and less waste, fewer deliveries and parked trailers. Plus less on-site man hours. 6. Durability – High-quality proven materials & components, resistant to corrosion, rust and damage. Stainless steel fasteners and dual reinforcement combining welded wire and moleculary-bound fibers designed to meet seismic and windstorm standards. 7.Thermal Efficiency – Our industry exclusive ThermaGuardTM connection system creates a thermal break and air barrier between our precast face and interior stud wall.The combination of factory-applied closed cell foam and on-site joint application provides for continuous insulation that meets IECC energy code and air barrier compliance. Lab tested to R-28, variable options available for your specific zone requirements. An effective choice as a LEED or Net-Zero contributor. 8. Fire Code Compliance – An ASTM E119 tested assembly containing NFPA 285 rated insulation, fire stops, and non-combustible components. 9. Risk Mitigation – A product with 25 years of field proven success, fully tested by certified independent labs to meet all current building codes. The quality assurance of controlled environment manufacturing. Water repellent concrete mixes and the availability of a unique caulking system, H2OutTM, mitigate any water issues. SlenderWall is built to pass the test of time. 10. Economics – Both up-front and long-term savings in materials, labor, time, and maintenance, even an additional 4” of perimeter floor space created because SlenderWall is designed to hang outboard of the floor slab. All this gives you more money to add to other parts of your project, or the bottom-line.
HEALTHCARE • HOSPITALITY • INSTITUTIONAL • MIXED-USE • MULTI-FAMILY • OFFICES • SCHOOLS
To view more projects, download typical details, or to request a quote, visit SlenderWall.com or call 800-547-4045.
Architectural Precast/Steel Stud Building Panels SLENDERWALL® is a product of Easi-Set® Worldwide, a licensor of precast products, with 70 licensed producers in 44 states & 10 countries. Manufacturing licenses available for qualified precast producers. A subsidiary of publicly traded Smith-Midland Corporation [SMID]. AP2-2019 Circle 75
Easiset Arch Products 2019 ten • 1905 fp ArchProd Ad2.indd 103reasons.indd 1
2/14/2019 4:27:28 PMPM 5/1/19 5:25
C O N T I N U I N G E D U C AT I O N S E R I E S
the building, are installed. The cavity is filled with insulation. The moisture and air barriers are installed. Mistakes can be made. Gaps occur. Thermal bridging happens. The moisture barrier can be ripped or compromised. These mistakes affect how effectively the building envelope insulates the interior and how efficiently the building operates. Designers today are looking for building envelope solutions that will perform as specified, reliably creating an efficient barrier against the exterior environment. Factory-built, factory-tested assemblies can eliminate much of the onsite variability that ultimately affects the thermal performance of the occupied building. Solutions like an architectural precast concrete cladding system, which contains the entire envelope system inside a monolithic, panelized unit, can offer designers the reliability they need in this next stage of sustainability, where built performance matters. SOLUTION
ARCHITECTURAL PRECAST CONCRETE © SlenderWall
CLADDING SYSTEM
An architectural precast concrete cladding system is a modularized building envelope solution that includes the façade, moisture/air barriers, insulation, and is even available with windows and interior framing. The system features a lightweight 2-in. thick precast concrete panel that is fixed to a light gauge galvanized steel frame with stainless steel fasteners. The way that the exterior concrete face attaches to the frame creates a thermal air gap that is filled with factory-applied, closed-cell foam insulation. The panels weigh onethird the weight of the traditional architectural precast panels, which allows installation to be completed with smaller cranes. This compact and comprehensive building envelope solution also eliminates the need for multiple insulation and interior crews. The cladding system is easily installed upon the building frame and the interior face of the panel is equipped with galvanized steel studs that are ready for drywall, reducing construction schedules. In terms of thermal performance, these architectural precast concrete cladding systems have been designed to meet current IECC thermal requirements in multiple climate zones. More specifically, this system can be specified in Zones 1 through 8, which makes it suitable for projects in Miami and the North Slope Borough in Alaska. It is worth noting that manufacturers of building envelope assemblies, like the architectural precast concrete cladding system described in this article, have two code-compliant avenues available for determining the thermal performance of their assembly products. They can use a prescriptive method, which essentially employs calculations to arrive at the expected thermal performance of the solution, or they can test the assembly to attain accurate data on the heat transfer that occurs through the insulated structure in representative test conditions. “The sustainability movement is moving toward greater degrees of transparency, so that designers have the best, most accurate information available to make their product and system selections,” explained Art Miles, president of Easi-Set WorldWide,
Designers of the LEED Gold New Orleans BioInnovation Center, Eskew+Dumez+Ripple and NBBJ, created the highperformance envelope with an architectural precast concrete cladding system.
a manufacturer of precast concrete. “We believe that designers are going to begin demanding performance data from third-party vendors to ensure the products they select can, in fact, perform as the manufacturers claim they can. We have had our architectural precast cladding system rigorously tested and openly share the tested results.” The independent laboratory testing, mentioned by Miles, was the American Society for Testing and Materials (ASTM) standard ASTM C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus, during which several architectural precast concrete panels containing varying depths of different closed-cell foam insulations and different sized thermal gaps were subjected to different conditions in a hot box test. The test measures the transfer of heat across the assembly and determines the thermal performance in terms of R-values and U-values of a particular building envelope solution. During these tests, the architectural precast concrete cladding system proved to be an acceptable solution for projects located in climate zones 1 through 8, meaning it can be used on any U.S. project and in many areas of Canada. Designers interested in knowing whether the stated R-value or U-value of a thermal performance solution is a calculated estimation, or a proven performance result, should ask manufacturers for more information. D E S I G N G OA L 3
REDUCE EMBODIED ENERGY IN DESIGNS
As sustainable design efforts have succeeded in reducing the energy consumption of buildings by improving the efficiency with which they operate, the community is turning its attention to reducing the energy consumed in the creation of the products and materials
that comprise the built structure. The term embodied energy refers to the energy consumed during the construction process and includes the consideration of the energy consumed during the extraction, processing and manufacturing of each product found within the finished building. “We understand the dire negative implications associated with greenhouse gas emissions to the atmosphere, and we know that the construction and operation of buildings is a significant contributor to greenhouse gas emissions worldwide,” explains Brendan Owens, senior vice president at USGBC. “Building energy use still represents the largest piece of the greenhouse gas puzzle in buildings, but over the past 40 years the operational efficiency of buildings has improved dramatically. We are even seeing zero-energy building performance goals achieved. As building efficiency improves, the relative importance of the materials we use to construct buildings grows. We’ve introduced credits in LEED designed to help designers minimize another big piece of the total carbon footprint. These credits inform and incentivize the specification of materials that have lower greenhouse gas emissions profiles.” SOLUTION
SPECIFY WOOD AND WOOD PRODUCTS
Trees, and the wood products derived from them, provide examples of the types of materials that can be used in building design and construction that offer low embodied energy values. In the report, Building with Wood: Proactive Climate Protection, author Dr. Jeff Howe explains, “Trees absorb carbon dioxide (CO2) and water (H20) and release oxygen (O2). The carbon absorbed is stored until the tree dies and decays or is burned in a wildfire, at which point the carbon is
E D U C AT I O N A L A DV E R T I S I N G S E C T I O N
1905APCEU04.indd 104
5/2/19 2:21 PM
JOIN US AT AIA ‘19 BOOTH 4547
The best wood materials for your best designs APPLICATIONS INCLUDE:
Cabinetry /
Casework /
Furniture /
Wall Panels
CHOOSE FROM A LARGE SELECTION OF PARTICLEBOARD, MDF & DECORATIVE PANEL PRODUCTS 3660 Gateway Street / Springfield, Oregon 97477 / 800.245.1115 / Roseburg.com Circle 76
• 1905 ArchProd Ad2.indd 105
5/1/19 5:25 PM
© Roseburg Forest Products
released back into the atmosphere. Products made from wood continue to store carbon for as long as they exist. In fact, one-half the weight of wood is carbon. This ability to store large quantities of carbon for long periods of time sets wood apart from, and provides a significant environmental advantage over, other building materials.” Howe continues, “When wood products are manufactured, carbon emissions [or CO2 equivalent emissions] are typically less than zero, meaning that more carbon is contained within the wood itself than is released into the atmosphere in the course of its manufacture.” This is a rare and unusual characteristic for a building material to possess. Howe goes on to explain, “The energy required to manufacture wood products is generally about half as much as is contained in them. Consider a glued laminated timber [beam]. The process of harvesting and drying the raw material, then manufacturing the glulam, consumes less energy than that which has previously been absorbed into the product. And what’s more, trimmings and other scraps generated in converting round logs to timbers are used in making other wood products—particleboard, fiberboard and paper—or is used in generating fossil fuel-free energy. The products themselves, once they reach the end of their life cycle, can be recycled or used to generate energy.” For proof, look at the Environmental Product Declaration (EPD) for various North American wood products released by the American Wood Council and verified by the Underwriters Laboratories Environment (ULE), an independent certifier of products and their sustainable qualities. An EPD is a document that provides standardized and objective information assessing the lifecycle environmental impact of a product. These EPDs support the claims made in Howe’s report by quantifying the Carbon Sequestered in Product at Manufacturing Gate as a negative (-) value. In other words, the amount of carbon emitted in the creation of a wood product, such as North American Laminated Veneer Lumber (LVL), —up to the point that the product has been manufactured and is ready for shipment, the portion of the life cycle referred to as cradle-to-gate—is negative. More carbon energy is contained within the wood product than has been emitted in the extraction and production of that product. While the EPDs from the American Wood Council provide a collaborative and industry-wide summary, wood products manufacturers are also investing in generating EPDs that are specific to their product offering and processes. Grady Mulberry, President and CEO of Roseburg Forest Products explains, “We have developed third-party verified EPDs to provide the product-specific environmental information that specifiers and builders are starting to demand. They support the claim that wood products are durable, natural, renewable, and come from sustainably managed forests that capture carbon, making them among the most responsible building materials available today. The EPDs we developed help us demonstrate that wood truly is a superior building product.” In the U.S., wood is commonly used as the main construction material to build homes. “About 80% of housing units are primarily built of wood, providing millions of tons of carbon benefit, including both
© Roseburg Forest Products
C O N T I N U I N G E D U C AT I O N S E R I E S
Increasing the use of wood in commercial construction would have many positive environmental benefits.
Wood products store carbon for as long as they exist and have low embodied energy values.
carbon stored in wood itself and emissions avoided.” The report by Howe states, “Increasing the use of wood in commercial, industrial, health care and government buildings would significantly reduce the climate change impact of building construction and increase carbon storage in the nation’s building stock.” The report posited that “increasing wood use to the maximum extent feasible in multi-family housing, low-rise nonresidential construction and remodeling could result in a carbon benefit equal to about 21 million metric tons of CO2 annually; this would be the equivalent to taking 4.4 million automobiles off the road indefinitely.” Innovations in wood products and new wood and mass timber technologies have expanded the role that wood products can play in a multi-family or commercial building project. The science of wood fibers, resin, and pressing allows wood products manufacturers to produce engineered products that are stronger and offer the enhanced performance characteristics necessary for these new applications. Wood can be considered as an alternative to more traditional steel and concrete materials used for framing and offers several benefits to taller structures. Mass timber components are natural insulators and offer impressive thermal performance to the building. The strength-to-weight ratio of wood is consistent with steel, but it weighs less, reducing loads on the foundation, which can be critical during seismic events. In the case of a fire, large wood slabs have excellent fire resistance, charring on the outside and protecting the integrity of their inner structure. According to USDA Secretary Tom Vilsack, “Wood may be one of the world’s oldest building materials, but it is now also one of the most advanced. Building stronger markets for innovative new wood products supports sustainable forestry, helps buffer and/or reduce greenhouse gas emissions, and puts rural America at the forefront of an emerging industry.”
the impact that those materials will have inside the built environment, as well as the ultimate end-of-lifecycle plan, whether a material will be destined for the dump or repurposed or recycled. Shading is an important piece of any sustainably-designed project. It is a necessary safeguard that enables a building to provide that critical connection with the outdoors, providing views and access to daylight, while protecting occupants and building performance from the discomfort and energy waste that can occur from glare and solar heat gain. Understanding the basic material compositions of the majority of shading products in the market and comparing and contrasting how those materials perform in terms of view-through, dimensional stability, recyclability, and fire retardancy will help designers select a shading fabric that meets the sustainable demands of a project.
D E S I G N G OA L 4
CHOOSE SUSTAINABLE SHADING FABRIC
A key theme in sustainable design today is that the material matters. It is no longer enough to have a building that performs efficiently and minimizes or eliminates unnecessary energy waste. Designers are being challenged to consider the energy that was used in the production of the materials found in the building and
SOLUTION
COMPARE DIFFERENT TYPES OF YARN
An overwhelming majority of the shading fabrics on the market are constructed from either a fiberglass or polyester yarn. Fiberglass is a fiber mainly produced from silica (sand) and includes limestone and soda ash. Composed of inorganic materials, fiberglass fabrics are unaffected by fungus or bacteria and are noncombustible. These glass fabrics also have a comparatively high melting point, which makes them much less susceptible to elongation than the other common yarn types. Elongation refers to the stretching and warping of a shade fabric that can occur when the shade is exposed to a level of heat or pressure that it cannot withstand. Fiberglass yarn does not elongate. Polyester yarn is a synthetic, thermoplastic fiber derived from coal, air, water and petroleum. This material is more flexible than shade fabrics made from fiberglass and can be constructed from post-consumer recycled content, like water bottles. Unfortunately, the long chain molecular structure of the polymer material is prone to elongation and stretch and the fabric has a lower melting point, which can be ill-suited to the intense heat that can occur when direct sunlight hits the shade through the window. Polyester fabrics can offer a higher visible light transmission than other fabrics, which means that more light is allowed to pass through the fabric than is absorbed or reflected. This higher visible light transmission can assist designers in achieving higher levels of daylight on the interior.
E D U C AT I O N A L A DV E R T I S I N G S E C T I O N
1905APCEU04.indd 106
5/2/19 2:21 PM
I N N O V A T I V E
New Spring Collection! Only at NeoCon.
S H A D I N G
®
S O L U T I O N S
Form and Function meet when fabric materials by Mermet combine with manual and motorized shades by Draper, Inc. Experience the future of innovative shading solutions in the Interiors & Sources Materials Pavilion at NeoCon 2019.
June 10-12 theMART | Chicago, IL Booth 7-1000 mermetusa.com draperinc.com neocon.com Circle 77
MERMET • 1905 ArchProd AP ad Ad2.indd resize.indd107 1
4/30/19 10:34 5/2/19 4:39 AM PM
C O N T I N U I N G E D U C AT I O N S E R I E S
There are 100% fiberglass and 100% polyester shade fabrics available. Another popular shading material uses fiberglass or polyester yarn as its core material and coats it with a polyvinyl chloride (PVC). The PVC coating provides the color for the shade and improves the durability, fungal resistance, UV resistance, washability and fire-retardant characteristics demonstrated by the fabric.
OPENNESS FACTOR 1 in
1 in
Š Mermet USA
1 in
1 in
Fiberglass Core Fabric 3% Openness Factor
Polyester Core Fabric 3% Openness Factor
Number of Openings: 754
Number of Openings: 266
The finer fiberglass yarns, which feature a greater number of smaller openings across the material, provide a crisper view through the material.
RECYCLABILITY
The type of yarn used in a fabric also determines the recyclability of the fabric. Solar shading fabrics manufactured from 100% fiberglass or 100% polyester are recyclable. Unfortunately, once the PVC coating is added to a fiberglass or polyester base yarn, the entire shade product is not recyclable. FIRE RETARDANCY
Fabric flammability is an important performance characteristic to consider when selecting the right materials for a project. Certain types of projects have code-mandated performance criteria that must be
Š Mermet USA
VIEW PRESERVATION
View preservation is one of the great advantages of choosing a solar shade over a blind because a solar shade still provides a view to the outdoors when it is pulled into the closed position. A blind product fully obstructs any view to the outdoors when deployed. However, shades constructed from different yarn types provide a different level of view preservation. Shade fabrics are often specified in terms of an openness factor. While different shade materials can, and do, offer the same openness factors (1%, 3%, 5%), the way the openness is distributed across the face of the material affects the type of view that a person can achieve through the fabric. Fiberglass core yarns tend to be finer than polyester corn yarns. When finer fabrics are woven together, the weave has a higher number of holes, or areas of openness, present per square-inch of fabric, than a weave of a thicker polyester core fabric. On average, there are 750 openings in one-square-inch of a fiberglass core material, and only 520 openings in one-square-inch of a polyester core material. The finer fiberglass yarns, which feature a greater number of smaller openings across the material, provide a crisper view through the material. The concept is very similar to the number of pixels on a screen display. The higher number of pixels on a screen, the better its resolution.
It is common practice to specify a shade fabric based on its color and openness factor, but the composition of the material can make a material difference in the way the shade performs.
satisfied. Regardless of project type, selecting shading materials that will slow down the combustion of the fabric or self-extinguish helps to protect the people and property inside the building when a fire occurs. Shading materials can be classified as either flame retardant or flame resistant. Flame-retardant materials are chemically treated and designed to slow down ignition or combustion. A 100% polyester fabric with a fire-retardant surface treatment is a common example of this type of material. These materials are so common, in fact, that the majority of window shade fabrics available on the market fit into this category. Flame-resistant fabrics are made from materials that are inherently nonflammable and designed to self-extinguish. Woven from sand and limestone, 100% fiberglass materials are recognized as flame resistant. In order to determine the performance of fabrics used as curtains, draperies and other window treatments, the National Fire Protection Assn. (NFPA) developed a test method to assess the propagation of flame across various textiles under specified fire conditions. NFPA 701 is a fire-retardancy testing standard required by the International Building Code (IBC) for textiles used in public spaces such as schools, churches, auditoriums, theaters and commercial buildings. The standard is designed to evaluate textiles that will hang freely (e.g. roller shades). The test method exposes 10 individual samples of a specified size to a flame for 45 seconds. The weight loss of the fabric and the presence of a residual flame is measured. In order for a fabric to pass the NFPA 701 test, the total weight loss of the sample cannot exceed 40% and the residual flame cannot last longer than an average of two seconds. Look for solar shades that are compliant with NFPA 701 to specify a material that will help protect life safety in the event of a fire. It is common practice to specify a shade fabric based on its color and openness factor, without regard for the type of yarn with which the shade is woven, but the composition of the material can make a material difference in the way the shade performs once it is installed. In this era of sustainable design, where there is growing scrutiny on the actual performance of the product, understanding the impact that the type of yarn can make on project objectives like view preservation, fire safety and recyclability is important.
D E S I G N G OA L 5
PREVENT PREMATURE PRODUCT FAILURES
In terms of practical application, the material matters, green or not, because a product must be able to withstand the conditions in which it is placed. Specifying products made of a material that is ill-equipped to weather its surroundings may lead to the premature failure of that product, reaching its end-of-lifecycle destination sooner than necessary. Specifying products that can sustain the hazards in their environment is a key consideration in sustainable design. The restroom or locker room environment is a great example of a space that can pose a significant number of threats to a material. These areas are often high traffic, in constant use and there is a certain de facto rigor to the activities that take place there. Exposure to germs and bacteria is a daily occurrence. Vandalism is a real concern in many bathrooms, be it from graffiti or a rambunctious visiting team that just lost a big game. Finally,there is the constant presence of water, from handwashing and showering, to regular cleaning. The materials specified for the bathroom partition or washroom accessory therefore, must be able to contend with a lot. SOLUTION
MATCH MATERIAL TO DEMANDS OF THE SPACE
There are five materials often selected for use in a bathroom space as either a bathroom partition or a washroom accessory, or both: steel (powder-coated or stainless); high-density polyethylene; plastic laminate; phenolic; and solid surface materials, such as marble and granite. Each has its own strengths and weaknesses that should be explored when determining which material best fits the specific type of bathroom or locker room being designed. Powder-coated and stainless-steel partitions are often specified in bathrooms and locker rooms. The powder-coated solutions are considered budget-friendly and available in a wide range of colors and finishes. Stainless-steel is more expensive and creates a higher-end aesthetic. Although powder-coated and stainless-steel partitions are quite common, very high humidity environments may undercut the longevity of the product’s usable life. The internal core is a honeycomb cardboard that may be damaged with
E D U C AT I O N A L A DV E R T I S I N G S E C T I O N
1905APCEU04.indd 108
5/2/19 2:21 PM
A PIECE OF
EUROPE—MADE
IN AMERICA THE ASI ALPACO COLLECTION ™
The ASI Alpaco™ Collection—a marriage of European design and engineering with the American manufacturing ingenuity you have come to expect from ASI—with the shortest lead times in the industry. The Collection is made from Phenolic and offers sleek hardware, robust construction and zero sightline doors and pilasters that meet in a flush finish with routed, overlapping closures for guaranteed privacy. And don’t let Alpaco’s looks fool you, the collection offers an exceptional value. 708.442.6800 • asi-accuratepartitions.com Circle 78
• 1905 ArchProd Ad2.indd 109
5/2/19 10:45 AM
Specify high-privacy compartments that eliminate sightlines into occupied stalls and are difficult to peek under to improve comfort in these private spaces.
laminate sheet, which acts as the protective top layer, is tough, but can be damaged. While vandals may find it hard to scratch the surface, they may be able to delaminate the top sheet in standard plastic laminate with enough effort. Phenolic materials have many qualities that make them a great fit for bathroom areas. They are impact resistant, which means phenolic bathroom partitions are very durable and are difficult to scratch. The phenolic material is also impervious to water, which makes it an optimal choice for showers, saunas and aquatic facilities, as the material is impenetrable to mildew, mold and odor. Phenolic bathroom partitions are available with a black core or can be created with the surface color integrated throughout the panel, like HDPE. From a coordinated design perspective, both bathroom partitions and washroom accessories have been made in the phenolic material, enabling specifiers to create a cohesive look throughout the space. It should be noted that, when selecting washroom accessories, it is important to pick products that have the appropriate capacity for the application. Choose large capacity paper towel dispensers or soap dispensers for stadiums or airports to ensure that the supplies will last, even through the rush. Solid surface materials, such as marble and granite, can also be used for bathroom partitions and urinal dividers. These materials are impervious to humidity and resistant to damage from water and cleaning chemicals. However, the use of these surfaces can be expensive, as both the materials and installation costs are much higher than the costs associated with buying and installing a powder-coated, stainless steel, HDPE, plastic laminate, or phenolic partition. Beyond choosing a material that can perform in the bathroom or locker room space, mainstream sustainability considerations now encourage designers to seek materials that also feature a low embodied energy, recycled content, or the quality of being built from rapidly renewable resources and low-VOC emissions that have been verified. HDPE bathroom
© ASI Group
sustained exposure to moisture and the exterior surface of the material can react to water as well. Steel products designed for use in a bathroom have often been engineered for rust and corrosion resistance. A powder coating on galvannealed steel improves the corrosion resistance of the surface. Quality stainless-steel products (Type 304) incorporate a mix of elements that enhance corrosion resistance. For example, while most stainless-steel alloys contain some amount of iron, which easily oxidizes to form rust, they also contain a high percentage of chromium, which creates a protective layer on the metal surface and resists corrosion of the material. Powder-coated and stainless-steel bathroom partitions and washroom accessories are also susceptible to vandalism. The paint can be scratched off a powder-coated steel product, which will require the surface to be repainted in order to fix the damage. While stainless steel surfaces can be scratched, they can be buffed to remove the markings. Both types of steel can be dented or dinged with force. In areas that must withstand a rowdier crowd, like opposing team locker rooms in high schools and universities, consider specifying a higher gauge stainless steel for washroom accessories. Some manufacturers offer 16-gauge stainless steel, which is the thickest, most-robust stainless-steel material available in these products. High-density polyethylene (HDPE) is a solid plastic material that is well suited to deal with the hazards of bathroom dwelling. With HDPE, the color is physically integrated throughout the material, not added on top of it at a later stage as a coating or laminate. As a result, bathroom partitions made from HDPE will never delaminate or need repainting. The non-porous surface is incredibly strong and impermeable, which enables HDPE bathroom partitions to resist mildew, mold, corrosion, dents, scratches and graffiti. These durable surfaces cannot be dinged or dented easily. Scratches are less noticeable, because the color is homogeneous throughout the partition, and easily repaired. Graffiti wipes off easily with most non-abrasive cleaners. Plastic laminate toilet partitions have a rigid, decorative outer layer, which is applied to a substrate typically made of particleboard. If moisture seeps through the black seams caused by standard edge banding, this particleboard can expand and warp causing the top sheet to delaminate from the core. One manufacturer, however, offers plastic laminate partitions without the standard black seams, by engineering a unique edge banding system that fuses with the substrate to create a seamless beveled profile. ASTM tests confirm this upgrade has an increased resistance to moisture and humidity, providing more than three times greater durability than standard plastic laminate partitions. Designers should avoid using standard plastic laminate partitions in an indoor swimming area or natatorium, because the material will not withstand the continued exposure to the moisture and chemicals in the air. In terms of durability, the plastic
© ASI Group
C O N T I N U I N G E D U C AT I O N S E R I E S
Plastic laminate bathroom partitions that feature edge banding eliminate unsightly black lines common in standard plastic laminate and offer increase moisture resistance.
partitions can be provided with up to 100% post-consumer recycled content and up to 33% post-industrial recycled content. The make-up of products made from phenolic materials is documented as containing an impressive 67% of rapidly renewable materials; phenolic materials that are color-invasive have earned GREENGUARD certifications for achieving low-VOC emissions. There are additional considerations for bathroom design that should be made, although they currently fall outside the definition of sustainable design. Occupant comfort is a key piece of the sustainable design algorithm. To that end, many schools have opted to incorporate high-privacy bathroom partitions, even though they are currently outside the regulations stipulated in the Americans with Disabilities Act (ADA), or the IBC, or a green building rating system, because they improve the comfort of people using the restroom. A high-privacy restroom partition eliminates sightlines into the occupied stall and makes it more difficult for people to peek under the door or over the walls. This singular feature may not make a bathroom operate more efficiently, but it can have a marked improvement on the comfort of the people using the space. In summary, the market has reached the next era of sustainable design. Success in the marketplace further reduces the carbon footprint of a project and helps to maintain the momentum of this movement.
TO RECEIVE AIA CREDIT:
• Go directly to: https://www.thecontinuingarchitect.com/ RFC0519 and login or enroll to take the test.
• You can also visit The Continuing Architect website
(www.thecontinuingarchitect.com) at any time and click the ‘Read for Credit’ banner to access the course and test.
• AIA Course No. RFC0519
E D U C AT I O N A L A DV E R T I S I N G S E C T I O N
1905APCEU04.indd 110
5/2/19 2:21 PM
ACORN WIRE STORAGE UNITS
index to advertisers
Standard Woven Wire or Expanded Metal options available 616.355.2970 | dri-design.com
• Secures equipment &
valuables • Allows light, ventilation
& fire suppression systems to work effectively • Easy to setup & reconfigure
for maximum flexibility • Use individually or configure
ACORN Wire and Iron Works 111 www.acornwire.com
H.E. Williams, Inc. www.hew.com
35
AltusGroup www.altusprecast.com
63
Kim Lighting (Hubbell) www.kimlighting.com
23
American Hydrotech www.hydrotechusa.com
93
Inpro www.inprocorp.com
59
Arcat www.arcat.com
81
Invisible Structures 64 www.invisiblestructures.com
Architectural Products Magazine 57, 97 www.arch-products.com
in multiples for larger spaces
Armstrong www.armstrong.com
AIA EXPO VISIT US AT BOOTH # 6749
ASI Storage Solutions 25, 109 www.asi-storage.com
Circle 79
Made in the USA since 1913 | acornwire.com | 800.552.2676
Circle 82
NEW HANOVER® PORCELAIN PAVER COLLECTIONS
42575 Architect 1/9th Page Lit Ad WA Ironworks May Issue.indd 1
Belden has introduced their version of “linear” to the Clay Segmental Paving market.
IFC-1
Belden has always shown great pride in bringing products to the market that are beautiful and long lasting. With the ability to produce this product out of two plants Belden offers many beautiful color combinations.
beldenbrick.com
65
Landscape Forms www.landscapeforms.com
91
Azon www.azonintl.com
111
Lightfair International www.lightfair.com
99
Belden Brick Company www.beldenbrick.com
29
Madrax www.madrax.com
55
Bilco www.bilco.com
Major Industries www.majorskylights.com
111
Bison Deck Supports 58 www.bisondecksupports.com B-K Lighting www.bklighting.com
95
Maxxon 3 www.maxxoncorporation.com
Bradley www.bradleycorp.com
45
Mermet www.mermetusa.com
85
Mitsubishi Electric www.mitsubishipro.com
19
Carlisle SynTec www.carlislesyntec.com
69
Móz www.mozdesigns.com
61
Citadel www.citadelap.com
67
NanaWall www.nanawall.com
9
Connectrac www.connectrac.com
NewBrick www.newbrick.com
5
62
53
Doug Mockett & Co. www.mockett.com
10, 111
Dri-Design www.dri-design.com
75, 111
Eldorado Stone www.eldoradostone.com
w w w.mocke t t.com (80 0) 523 -1269 Circle 81
4
Feeney 43 www.feeneyarchitectural.com
Pops Up, Hides Away
Circle 84
54
47
Dura Coat Products 41 www.duracoatproducts.com
PCS64
Krieger Specialty Products www.kriegerproducts.com LaCantina Doors www.lacantinadoors.com
C.R. Laurence www.connectrac.com
Power Grommet
Kingspan 2, 11, 15 www.kingspaninsulation.us
83
Consolidated Glass Corporation www.cgcglass.com
Circle 80
Forbo www.forboflooringna.com
31
Fujitsu www.fujitsu.com
13
General Shale www.generalshale.com
39
Guardian Industries www.guardian.com
101
Hanover Architectural Products 51, 111 www.hanoverpavers.com
107
Oldcastle Building Envelope BC www.oldcastleglass.com Parkland Plastics www.parklandplastics.com
87
Petersen Aluminum www.pac-clad.com
6
Roseburg www.roseburg.com
105
Rulon Company www.rulonco.com
73
Schluter Systems www.schluter.com
79
Serge Ferrari www.sergeferrari.com
33
Seves Glass Block www.sevesglassblock.com
61
SlenderWall www.slenderwall.com
21, 103
St. Cloud Window www.stcloudwindow.com
60
Stonhard www.stonhard.com
89
Wausau Tile www.wausautile.com
ARCHITECTURAL PRODUCTS
1905APPlit.indd 111
39
ATAS International, Inc. www.atas.com
3/25/19 9:49 AM
With 5 beautiful collections to choose from, you’re sure to find the perfect match for your project. Hanover’s Porcelain Paver collections feature new colors and sizes―only available from Hanover Architectural Products. Porcelain Pavers are hard-wearing, anti-slip, weather resistant and capable of withstanding heavy loads without compromising aesthetics. They are quick and easy to install and require little maintenance. Visit www.hanoverpavers.com or call 800.426.4242 for more information. Circle 83
Kalwall www.kalwall.com
IBC
111
5/1/19 5:32 PM
last detail: architectural leader
Exporting ‘Community as Strategy’ In a sort of public-private team up, KI and IIDA are “on tour” discussing the subject of community with local architects—a top issue in the industry, and one that’s contingent upon choices made. Partnering with the Commercial Interiors Design Assn. (IIDA), furniture manufacturer KI is helping launch a series of architectural discussions across the country. The first “Community as Strategy” event recently took place in Chicago, and the next one is coming up July 10, in Washington D.C.; future events are planned for New York, Boston and San Francisco. A sort of series “pre-launch” began in St. Louis, where IIDA Executive VP and CEO Cheryl Durst moderated a panel, which included Aimee Rowbottom, director of architecture and interiors at Jacobs, among others. In setting the tone for the panels, KI’s VP of A&D marketing, Deborah Breunig, interviewed Durst and Rowbottom for a blog previewing the discussions. A road warrior, Breunig noted she often finds herself in long conversations with people waiting for their flights in airports. While it may seem a bit
odd to be having long conversations with total strangers, Durst pointed out, it’s really not, as everyone is looking for a connection point. “Community is one of the top issues people in the profession are talking about in 2019,” says Durst.
who come into them. “Over the past couple of years, there’s more emphasis on providing meeting spaces. That’s reflected in data we’ve collected showing a 20% increase in places where people can connect with each other,” says Rowbottom.
In speaking with Rowbottom in more detail (some of her Q&A is included below), she asked the designer why community as strategy is important. “It’s a lot about choice, which is so integral to wellbeing. If users feel in control—that they can go to alternate locations or they are part of the decision-making process—they’re going to be happier and have a sense of wellbeing about themselves. That overlays itself on their experience with the company.”
When asked for an example where these design principles had measurable results, Rowbottom pointed out a project Jacobs did for a healthcare client, where they had need to increase space efficiency and flexibility. After working to deliver a solution, the firm did a post-occupancy evalu-
She adds that spaces have to reflect what a business or organization is trying to do, but be flexible enough to change with the people
ation, which showed, in fact, the improvements did have a positive impact on work and wellness, along with space efficiency. “There was a 17% increase in space efficiency. But there was also a 46% increase for collaboration, a 35% increase in focus and a 32% increase in socialization. All by having choice-based design.”
Aimee Rowbottom, Director of Architecture and Interiors, Jacobs, St. Louis, was one of the fi rst participants in a collective discussion of architects focusing on community.
BREUNIG:
That goes hand in hand with the textiles. Some environments have become more casual with people bringing coffee, food and items that can cause dirt, debris and destruction to a piece of furniture. ROWBOTTOM:
We’re seeing our textile manufacturers coming up with more and more patterns and weaves. Stain-blocking properties are being integrated in different ways, so we have more options in what we offer clients.
BREUNIG:
BREUNIG:
How important is involvement with the manufacturing sector—from lighting, to flooring, to furniture—to creating connected work and learning spaces?
People want community spaces to feel like home. What options are available to designers?
ROWBOTTOM:
If there’s a certain look and feel that’s desired as you’re creating certain spaces, our designers need to reach out to our manufacturer and vendor base. That can help them understand available products that may have a similar look and feel that can meet the performance and safety criteria. Vendors may offer up different options. Or, they may be able to offer a tweak or a change to a product to create the mood or vignette for which the designer is looking.
ROWBOTTOM:
Having a dialogue with manufacturers is key as these bigger ideas are synthesizing in the design process. I don’t know that it’s specifically product driven. It may be a series of discussions about how products are paired together, or how they are placed within a space, that helps provide some interesting opportunities for arranging space and providing choice.
112
ARCHITECTURAL PRODUCTS
1905APLSD03.indd 112
05 . 2019
5/1/19 5:21 PM
YOU CREATE THE VISION
Let’s build bold.
We provide: • Ease • Convenience • Reliability Let’s work together. TecturaDesigns.com
Circle Circle39 85
• 1905 ArchProd Ad2.indd 300
5/1/19 9:44 AM
SOME SEE A SKYLIGHT WE SEE YOUR IDEAS TAKE FLIGHT
Custom-Engineered Skylights at Florida Polytechnic Santiago Calatrava drew his inspiration from studying birds in flight—his goal was to illuminate the interior with natural daylight. The solution is not just a product— it’s a collaboration. Visit obe.com/weseeyourvision to see how we can help you make your next idea a reality. Let’s solve it, together.
Circle 86
• 1905 ArchProd Ad2.indd 301
5/1/19 9:44 AM