PAG Catalogue 2009 by Digital Precision Systems Ltd.

Broadcast Catalogue 2009

Professional Broadcast Equipment

PAG. The choice of professionals worldwide.

PAG is the leading designer and manuafacturer of high-quality batteries, chargers and camera lighting for the broadcast and professional video industries. PAG’s aim is to provide the highest quality products for the job, the greatest value for money and the best technical advice and after sales support for you, the professional.

PAG began designing and manufacturing production and post-production equipment for the film industry over 40 years ago. During the 1980s the demand for power for the first portable electronic cameras led the company into the Broadcast Television arena. > The PAGlok Connector was one of the industry’s earliest battery mounting systems. > Fast-charging had a reputation for reducing battery life until PAG developed its PAG ACS (Advanced Charging System) software.

It is PAG’s intention to create the premier product for the market. Safety, reliability and durability are the prime concerns at all stages of a product’s development. When you buy a PAG product you can be assured that it has achieved a quality standard that is second to none.

PAG has always maintained its own Research & Development facility, which has enabled the company to develop the world-leading technology that is embodied throughout its product range today: > PAG’s unique charging software extends battery life. > PAG Time Batteries feature the most accurate built-in Power & Time Display. > Paglight is the industry’s most versatile camera light.

PAG products have earned a reputation throughout the world for excellence in quality, reliability and performance. The PAG Warranty reinforces this reputation (see Page 27).

A full after-sales service is provided by PAG during a product’s lifetime, which includes servicing, repairs and technical advice. PAG’s worldwide network of Authorised Service Centres has a wealth of specialist knowledge, the result of PAG’s 40 years experience. Using these centres is the only way to ensure the continuation of the quality standard for which you first chose PAG products. PAG products are available via a worldwide network of companies and agents as well as our on-line sales service www.pagstore.com

INTRODUCTION www.paguk.com

PAGlok System Other formats can be charged via the front PP90 sockets of AR124PLD & Quasar chargers using the appropriate charge adaptor.

9551V Power Plate dual battery mount for L110, L95 & ZL-50 V-Mount batteries

9551 Power Plate dual battery mount for L110, L95 & ZL-50 PAGlok batteries

Paglight

9792 AR124PLD 9302 L110 Time Battery

9382 L95 Time Battery

9317 ZL-125 Time Battery

9522/PAGlok Connector

9752 QUASAR/PSU 9726 QUASAR

9310 L95e Battery

9791 Camera Power Supply

9315 ZL-50 Battery

9316 ZL-150 Battery 9613 Freelancer

PAG V-Mount Compatible System 9553 Power Plate dual battery mount for L110, L95 & ZL-50 PAGlok batteries

PAG V-Mount batteries can also be charged using the appropriate Sony charger

9553V Power Plate dual battery mount for L110, L95 & ZL-50 V-Mount batteries

Paglight

9302V L110 Time Battery

9360 L95 Time Battery

9317V ZL-125 Time Battery

9702V PAG CUBE 4-channel simultaneous charger featuring Intelligent Parallel Charging.

9522V/V-Mount Connector 9310V L95e Battery

9791V Camera Power Supply

9315V ZL-50 Battery

9316V ZL-150 Battery

9613V PAG V2 2-channel sequential charger

PAG Snap-on Compatible System 9552 Power Plate dual battery mount for L110, L95 & ZL-50 PAGlok batteries

9552V Power Plate dual battery mount for L110, L95 & ZL-50 V-Mount batteries

Paglight

All-Chemistry PAG chargers incorporating patented sliding Snap-on compatible connectors, suitable for charging PAG Li-Ion and some Anton-Bauer batteries (not Dionic).

9795 PULSAR

9727 QUASAR

9302A L110 Time Battery

9383 L95 Time Battery

9335A L95 Power Circle Battery 9753 QUASAR/PSU

9798 Camera Power Supply

PAGlok and V-Mount batteries can also be charged via the front PP90 sockets using the appropriate charge adaptor.

SYSTEMS www.paguk.com

Why Choose PAG Batteries? PAG Batteries are the most technologically advanced in the industry. They are designed to provide a safe, reliable power source for most professional requirements. They are manufactured to withstand the strains and stresses of use in

1 Quality by Design PAG uses only the highest quality components in the construction of its batteries. Safety, reliability, and durability are the prime concerns, from conception to final assembly.

2 Branded Cells PAG uses premium grade branded cells, which have been extensively tested to ensure excellent cycle life and capacity. High-quality, branded Li-Ion cells are a vital prerequisite to the creation of a safe Li-Ion battery. Poor quality cells may develop internal shorts, or their electrolyte may be contaminated, giving rise to further problems. Unfortunately, PAG has discovered that this kind of low-quality cell is being used in batteries that are branded as professional broadcast products. The name PAG on a battery is an asurance that only high-quality cells and materials have been used in its construction.

3 No Cell-Imbalance The low-resistance inter-cell nickel strapping and cell layout are constructed to optimize current sharing, reducing one of the common causes of cell-imbalance, and prolonging battery life.

4 Electronic Protection PAG Li-Ion batteries have a higher safety standard than those of other manufacturers. PAG’s electronic protection system guards against: over-voltage, under-voltage, over-current, over-charge, over-discharge, over-temperature, under-temperature and inappropriate charge sources. Each protection feature has at least one back-up.

5 Protected Circuits The internal circuits of PAG Li-Ion batteries are coated with Parylene, the premier conformal coating, to protect circuits against the results of severe mechanical abuse to the cell pack, by making them electrolyte resistant. From a safety viewpoint PAG believes this coating to be an essential additional level of protection, and yet PAG is the only manufacturer that protects its batteries in this way.

6 Charged for Longer Life The key to extended battery life lies in the charging. PAG chargers are the most advanced available. The software that controls the charging process was developed by PAG after years of extensive research, and continues to evolve as new cell-chemistries become available. To ensure the longest possible cycle life PAG batteries should always be charged with the appropriate PAG charger. When protected from abusive charging practices PAG L95 Time Batteries have an average life of 3 years, and are guaranteed for 2 years (see Chargers, Pages 12 to 14).

7 Protective Cases High-impact, injection-moulded polycarbonate, or medium impact ABS cases are used, which incorporate integral cradles for protection of the cell-pack, and non-slip external features for secure handling.

WHY CHOOSE PAG BATTERIES? www.paguk.com

the harshest environments, and to perform consistently over their natural lifetime. PAG Batteries incorporate many unique proprietary features designed to assist the cameraman and prolong battery life. PAG means quality.

8 Capacity Indication PAG’s battery capacity indication technology is unsurpassed. The PAG Power & Time Display is the industry’s most accurate run-time display (see Page 5) and one of the great advantages of the PAG L95 Time Battery. The unique 5 LED Power & Time Circle incorporated in the low-cost PAG L95e battery also provides a run-time indication on-load (see Page 4).

9 RF Resistance PAG Li-Ion batteries have built-in RF resistance to prevent shut-down in the field when used in close proximity to radio transceivers.

10 United Nations Testing It is a legal requirement of air transport and civil aviation authorities that Li-Ion batteries be independently tested to comply with United Nations regulations, before they can be certified ‘air safe’. Regulations exist because poorly constructed Li-Ion batteries have been known to break down internally and self-ignite. PAG Li-Ion batteries are tested and certified to comply with United Nations specifications. Each unique Li-Ion battery assembly is issued with a test report number. You should always ask the battery manufacturer for a test report number that relates to the cell-pack assembly, and not just the individual cells.

11 Service Support A PAG customer is able to call upon expert technical advice and a full back-up service throughout a product’s lifetime. The quality of service that PAG provides is one of the main reasons why broadcast organisations choose PAG (see Page 1).

12 Recelling Instead of recelling your battery, PAG offers UK customers a substantial discount (25%) on the price of a new battery of equivalent or greater specification, including a full warranty. A cell replacement, by a company other than PAG, is a false economy. It degrades the build standard of the product and leaves you with a battery of dubious quality, and a potential safety concern.

13 Recycling PAG provides a recycling service for all of its expired batteries. Simply return your batteries by prior arrangement to your PAG Agent, or to PAG Ltd. London. This ensures that the materials involved in their manufacture are recovered for future use, where possible, or disposed of in accordance with the appropriate legislation.

PAG L95e. Economic & Enhanced.

Switch to a high-quality Li-Ion battery system for less. Low-Cost Li-Ion Although relatively low in cost, compared to the cameras they power, high-quality Li-Ion battery systems can appear expensive when compared to some of the cheaper options available. However, low-quality Li-Ion batteries can fail within a year, and provide poor value for money. For this reason PAG has introduced a highly economic Li-Ion battery that maintains the high quality and safety standards for which PAG is renowned. Power & Time Circle The PAG L95e is ideal for those who require the benefits of a Li-Ion system but not the highly accurate run-time information provided by the PAG Time Battery (see Page 5). The L95e incorporates a new display, the PAG Power & Time Circle. It displays charge status in terms of percentage, using 5 LEDs. Each LED represents approximately 20% of available capacity. When the battery is on-load the display will also provide an estimate of remaining runtime. It uses the 5 LEDs to indicate the remaining hours and minutes. Compatibility PAG provides the new L95e Li-Ion battery in PAGlok and V-Mount compatible formats.

Capacity in the Viewfinder The V-Mount L95e, when used to power certain Sony cameras, will provide a percentage display of available capacity in the camera viewfinder. Longer Cycle Life PAG has incorporated many levels of protection within the L95e to ensure that it is one of the safest Li-Ion batteries available. These features help prevent the damaging processes that reduce capacity, and in combination with proprietary charging techniques, ensure a longer battery cycle life. PAG is able to offer an impressive warranty of 18 months on the new L95e.

from the load and pressing the display button, provided the battery still retains some charge. Charging To achieve the longest cycle life the PAG L95e should always be charged using a PAG charger (see Low-Cost Chargers Page 13). PAGlok chargers in the field require a software upgrade for the L95e. PAG V-Mount chargers are already compatible. The appropriate Sony charger can be used.

PAG L95e Low-Cost Li-Ion Batteries: PAG L95e (PAGlok). 14.8V 6.5Ah, 95 watt-hours. Model 9310 PAG L95e (V-Mount). 14.8V 6.5Ah, 95 watt-hours. Model 9310V

Weights and dimensions see Page 8.

Power & Time Circle Display:

The PAG L95e incorporates quality branded cells, and an internal protection circuit coated with Parylene to protect against the results of severe abuse to the cell pack. No Service Charge The new 5 LED display maintains its level of accuracy after repeated partial discharge cycles, and the battery does not require a periodic 'service charge' to re-establish accuracy. Self-Recovery If the battery has been shut down by its protection circuit it can be recovered by simply removing it

A second button press activates the time display. The ‘HRS’ LED flashes twice.

The number of hours is indicated by the number of lit LEDs: 2 LEDs = 2 hours.

The ‘MINS’ LED then flashes twice.

The number of minutes is indicated: 3 LEDs = 30 mins.

L95e LI-ION BATTERY www.paguk.com

PAG Li-Ion Time Batteries.

Why Li-Ion? Li-Ion cell technology possesses a high capacity to weight ratio which makes it particularly well-suited to

powering the latest professional broadcast cameras. PAG Li-Ion Time Batteries utilise advanced, high-quality cell technology, which provides increased run-time for a camera and light up to 35W.

One of the great advantages of PAG’s Li-Ion Time Battery is the PAG Power & Time Display. This built-in capacity indication and run-time display was designed and developed by PAG at a time when a 4 or 5 LED ‘fuel-guage’ was the best available. PAG’s revolutionary display provides a prediction of equipment run-time, on-load, that is continually updated and accurate to the minute. The battery’s internal processor achieves this taking into account the changes of load that occur during use, the charge status and condition of the cells, and the ambient temperature. PAG’s display was the first to achieve this. No other capacity indication device displays equipment run-time this accurately. The Power & Time Display uses an easy-to-read digital character format, and displays remaining run-time on-load, at the press of a button; hours are displayed first, followed by minutes.

Two batteries will provide enough power for a day’s shooting with most camera and lighting set-ups. PAG Li-Ion batteries are compact and can be transported easily in your camera bag. Li-Ion batteries

do not self-discharge as quickly as other cell technologies and can be partially charged and discharged without causing long term problems.

The original and most accurate built-in battery run-time display. At the press of a button the PAG Power & Time Display shows run-time against load...

...in hours...

...followed by minutes.

Available capacity is also displayed... The next button press shows available capacity in Ah (0.1Ah increments) and a further press shows capacity as a percentage (1% increments). Capacity indication in ampere-hours and percentage can also be displayed when the battery has been removed from the load, providing an accurate charge status at all times.

5 3

LI-ION TIME BATTERIES www.paguk.com

...in ampere-hours

...followed by percentage.

The Industry’s most sophisticated batteries. Higher Capacities Todays power-hungry cameras require high capacity batteries. The PAG L95 is a 14.8V 6.5Ah battery that packs 95 watt-hours of power. It will run a camera that consumes 24W for almost 4 hours. When longer run-times are required there is the PAG L110, a 14.8V 7.5Ah 110 watt-hour pack. The PAG L110 is the same size as the L95 and shares the same impactresistant casing and advanced internal features. Both models

incorporate the unique PAG Power & Time Display, which shows remaining run-time, on-load. One Battery, All Systems Both the L95 and the L110 are available in models that are compatible with the three most popular mounting systems: > PAGlok > V-Mount (Sony) > Snap-on (Anton-Bauer) PAG is the only manufacturer that offers its premier Li-Ion battery in three formats.

Combined Capacities The capacities of two PAG Li-Ion batteries, PAGlok or V-Mount, L95 or L110, can be combined to provide a higher current draw capability, and even longer run-times, by using the PAG Power Plate. The Power Plate is available with a choice of connector, making it a system converter as well as a power multiplier. The high current-draw capability is ideal for powering highdefinition camcorders and a camera light. Using two Li-Ion batteries to

share the load and achieve a larger, combined capacity ensures that you discharge the battery at a lesser rate (see Page 17).

PAG Time Batteries are compatible with all systems. Quality Cells Quality branded cells, such as those utilised by PAG, are a vital prerequisite to the creation of a safe Li-Ion battery. Electronic Protection PAG has incorporated a sophisticated electronic protection system within its Li-Ion batteries to guard against abusive practices that could reduce battery life. The system is in turn protected with Parylene, the premier conformal coating. Longer Lasting Li-Ion The protection built into PAG Li-Ion batteries prevents the damaging processes that reduce capacity; this, combined with proprietary charging techniques, ensures a longer battery cycle life.

PAG guarantees its L95 and L110 Time Batteries for 2 YEARS. The average life of an L95 battery is 3 years. When you compare this to lower quality imported options, which have been known to fail within

a year, you understand why top broadcasting organizations and camera operators choose PAG. Charging One of the benefits of Li-Ion technology is the low self-discharge rate. This means that batteries do not have to be topped up if they have not been used for a few days. There is also no ‘memory effect’ as Li-Ion batteries do not suffer long term problems as a result of partial charging and discharging. PAG Chargers To ensure the longest possible cycle life PAG Li-Ion batteries should be charged with PAG chargers. Two and four channel models are available that incorporate compatible battery connectors (see Pages 11 to 14). It is also possible to charge PAG Li-Ion batteries via the front PP90 sockets of all-chemistry PAG chargers, using the appropriate charge adaptor (see Page 15). PAG V-Mount batteries can be charged using PAG V-Series

chargers or the appropriate Sony charger. High Capacity or Long Life A unique charge facility, within the PAGlok and Snap-on compatible PAG L95 Time Batteries, provides a choice between extended cycle life or high capacity, when charging with PAG all-chemistry chargers. Air Transportation PAG L95 batteries have been tested by an independent test facility, to comply with United Nations regulations, as required by air transport and civil aviation authorities. There are no restrictions on the air transportation of PAG L95 batteries in hand luggage.

(See PAG’s Air Transportation Declaration on the inside back cover).

NOTE: PAG L110 batteries are currently only available to UK customers.

PAG Li-Ion Time Batteries: PAG L95 (PAGlok). 14.8V 6.5Ah, 95 watt-hours. Model 9382 PAG L95 (V-Mount). 14.8V 6.5Ah, 95 watt-hours. Model 9360 PAG L95 (Snap-on). 14.8V 6.5Ah, 95 watt-hours. Model 9383 PAG L110 (PAGlok). 14.8V 7.5Ah, 110 watt-hours. Model 9302 PAG L110 (V-Mount). 14.8V 7.5Ah, 110 watt-hours. Model 9302V PAG L110 (Snap-on). 14.8V 7.5Ah, 110 watt-hours. Model 9302A

For weights and dimensions see Page 8.

LI-ION TIME BATTERIES www.paguk.com

PAG Zero-Lithium Travel-Packs.

PAG ZL-Series flight-friendly batteries are welcome aboard. Air Transportation Certain airlines have refused to let Li-Ion ENG batteries on-board aircraft in hand luggage, despite legitimate air safety certification that proves compliance with IATA regulations for lithium content and United Nations testing. For this reason, PAG has introduced ZL-Series Travel Packs, a range of flight-friendly batteries that contain zero-lithium, and are always welcome aboard. A Choice of Capacities The ZL-Series comprises battery packs with capacities of approximately 150, 125 and 50 watt-hours. Models are available that are compatible with either the V-Mount or PAGlok formats. In addition there is also a 40 watt-hour NP1 pack. Highest Capacity Battery The ZL-150 is PAG’s highest capacity battery and is packaged in PAG’s popular slimline SuperPack format, rather than the cumbersome ‘brick’. Li-Ion batteries of this capacity are limited to two units in your hand luggage, whereas the ZL-150 has no such restriction. In addition to the air transportation benefits, the PAG ZL-150 is an ideal solution for those who require extended run-time, and a higher current-draw capability.

ZL-SERIES BATTERIES www.paguk.com

Zero-Lithium Time Battery PAG has incorporated its highly accurate Power & Time Display into the 125 watt-hour ZL-125; it is ideal for those who require increased capacity and accurate run-time information. Smaller, Lighter Packs The ZL-50 is a more compact battery. Its dimensions match those of the PAG L95. It has a capacity of approximately 50 watt-hours. The PAG ZL-50 is able to indicate the state-of-charge by means of a four LED display. If the battery is more than 87% charged all four LED’s will light, when the display button is pressed. If the battery is less than 12% charged none of the LED’s will light.

NP1 Format The NP1 format ZL-NP, has a capacity of approximately 40 watthours and is capable of supplying a continuous current of 8A, ideal for powering a camera and lighting simultaneously. It also features a four-LED state-of-charge indicator. ZL-Series batteries are compatible with PAG All-Chemistry AR Series and new V-Series chargers, which PAG recommends for extended battery life (See Pages 11 to 14). The Latest Ni-MH Technology PAG ZL-Series batteries employ the latest Ni-MH cell-technology, which has greatly improved since its introduction to the industry approx-

imately a decade ago. Customers can now expect a longer cycle life, if batteries are always charged with the appropriate PAG charger.

PAG ZL-Series Batteries: PAG ZL-150 (PAGlok). 14.4V 10Ah, 150 watt-hours. Model 9316 PAG ZL-150 (V-Mount). 14.4V 10Ah, 150 watt-hours. Model 9316V PAG ZL-125 Time Battery (PAGlok). 13.2V, 125 watt-hours. Model 9317 PAG ZL-125 Time Battery (V-Mount). 13.2V, 125 watt-hours. Model 9317V PAG ZL-50 (PAGlok). 14.4V 3.2Ah, 50 watt-hours. Model 9315 PAG ZL-50 (V-Mount). 14.4V 3.2Ah, 50 watt-hours. Model 9315V PAG ZL-NP (NP1). 13.2V 3Ah, 40 watt-hours. Model 9314

Page 8 weights and dimensions

PAG Batteries.

Li-Ion Battery Model 9310

PAGlok

PAG L95e

PAG L95 Li-Ion Time Battery Model 9382

14.8V 6.5Ah, 95Wh

130 x 86 x 42mm / 0.75kg

Li-Ion Time Battery Model 9302

PAGlok

PAG L110

PAG ZL-150 Ni-MH Battery Model 9316

14.8V 7.5Ah, 110Wh

14.4V 10Ah, 150Wh

130 x 86 x 42mm / 0.75kg

208 x 125 x 44mm / 2.35kg

UK only

Ni-MH Time Battery Model 9317

PAGlok

PAG ZL-125

PAG ZL-50 Ni-MH Battery Model 9315

13.2V, 125Wh

14.4V 3.2Ah, 50Wh

208 x 125 x 44mm / 2.2kg

130 x 86 x 42mm / 0.88kg

Li-Ion Battery Model 9310V

V-Mount

PAG L95e

PAG L95 Li-Ion Time Battery Model 9360

14.8V 6.5Ah, 95Wh

130 x 86 x 47mm / 0.75kg

Li-Ion Time Battery Model 9302V

V-Mount

PAG L110

PAG ZL-150 Ni-MH Battery Model 9316V

14.8V 7.5Ah, 110Wh

14.4V 10Ah, 150Wh

130 x 86 x 47mm / 0.75kg

208 x 125 x 52mm / 2.35kg

UK only

Ni-MH Time Battery Model 9317V

V-Mount

PAG ZL-125

PAG ZL-50 Ni-MH Battery Model 9315V

13.2V, 125Wh

14.4V 3.2Ah, 50Wh

208 x 125 x 52mm / 2.2kg

130 x 86 x 47mm / 0.88kg

BATTERIES www.paguk.com

PAG Batteries. Snap-on

Snap-on

PAG L95 Li-Ion Battery Model 9335A

PAG L95 Li-Ion Time Battery Model 9383

14.8V 6.5Ah, 95Wh

130 x 86 x 52mm / 0.76kg

NP1

Snap-on

PAG L110

PAG ZL-NP

Li-Ion Time Battery Model 9302A

Ni-MH NP Battery Model 9314

14.8V 7.5Ah, 110Wh

13.2V 3Ah, 40Wh

130 x 86 x 52mm / 0.76kg

71 x 182 x 25mm / 0.73kg

UK only

PAG Batteries at a Glance. PAGlok Batteries No:

Name:

Cells:

V/Ah:

Size (mm):

Weight:

Charger With Compatibile Connectors:

Capacity Indication:

9310

L95e Battery

Li-Ion

14.8V 6.5Ah

130 x 86 x 42

0.75kg

AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613)

Power & Time Circle

9382

L95 Time Battery

Li-Ion

14.8V 6.5Ah

130 x 86 x 42

0.75kg

AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613)

Power & Time Display

9302

L110 Time Battery

Li-Ion

14.8V 7.5Ah

130 x 86 x 42

0.75kg

AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613)

Power & Time Display

9315

ZL-150 Battery

Ni-MH

14.4V 10Ah

208 x 125 x 44

2.35kg

AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613)

Manual Charged/Used

9317

ZL-125 Time Battery

9316

ZL-50 Battery

Ni-MH 13.2V 125Wh Ni-MH

14.4V 3.2Ah

208 x 125 x 44

2.20kg

AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613)

Power & Time Display

130 x 86 x 42

0.88kg

AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613)

LED Display

PAG V-Mount Compatible Batteries 9310V

L95e Battery

Li-Ion

14.8V 6.5Ah

130 x 86 x 47

0.75kg

Cube (9702V), V4-iPC (9700V), V2 (9613V)

Power & Time Circle

9360

L95 Time Battery

Li-Ion

14.8V 6.5Ah

130 x 86 x 47

0.75kg

Cube (9702V), V4-iPC (9700V), V2 (9613V)

Power & Time Display

9302V

L110 Time Battery

Li-Ion

14.8V 7.5Ah

130 x 86 x 47

0.75kg

Cube (9702V), V4-iPC (9700V), V2 (9613V)

Power & Time Display

9315V

ZL-150 Battery

Ni-MH

14.4V 10Ah

208 x 125 x 52

2.35kg

Cube (9702V), V4-iPC (9700V), V2 (9613V)

Manual Charged/Used

9317V

ZL-125 Time Battery

208 x 125 x 52

2.20kg

Cube (9702V), V4-iPC (9700V), V2 (9613V)

Power & Time Display

9316V

ZL-50 Battery

130 x 86 x 47

0.88kg

Cube (9702V), V4-iPC (9700V), V2 (9613V)

LED Display

Ni-MH 13.2V 125Wh Ni-MH

14.4V 3.2Ah

PAG Snap-on Compatible Batteries 9335A

L95 Battery

Li-Ion

14.8V 6.5Ah

130 x 86 x 52

0.76kg

Pulsar (9795), Quasar (9727, 9753)

Power Circle Display

9383

L95 Time Battery

Li-Ion

14.8V 6.5Ah

130 x 86 x 52

0.76kg

Pulsar (9795), Quasar (9727, 9753)

Power & Time Display

9302A

L110 Time Battery

Li-Ion

14.8V 7.5Ah

130 x 86 x 52

0.76kg

Pulsar (9795), Quasar (9727, 9753)

Power & Time Display

Ni-MH

13.2V 3Ah

182 x 71 x 25

0.73kg

AR124NPD (9793)

LED Display

PAG NP1Batteries 9314

ZL-NP Battery

PAG Ni-Cd Batteries. Nickel-Cadmium batteries, designed for professional broadcast applications, are not affected by European Union legislation preventing the sale of Ni-Cd batteries in the EU, which came into effect in September 2008. The legislation includes exemption for Ni-Cd batteries intended for industrial and military use. For this reason PAG continues to sell its Ni-Cd battery range. PAG will aim to meet your demand for NiCd batteries, where possible, until Ni-Cd cells are no longer available, or become uneconomic.

BATTERIES www.paguk.com

The process of developing alternative products for the Ni-Cd range has already begun with the introduction of the ZL-Series batteries and Ni-MH Pagbelts. These batteries utilise the latest high-capacity, long-life Ni-MH cells, and are capable of providing the higher-currents that new, highdefinition cameras require. The new Ni-MH cells are superior to those available when this technology was first introduced to the Broadcast Industry. Contact the PAG Sales Department for information about the range of PAG Ni-Cd battery packs and belts.

Pagbelt NMH. Battery Belts.

Dual XLR-4 (F) output connectors

(ODP) feature is an automatic low voltage cut-out facility that prevents cell imbalance, the most common cause of reduced battery cycle life. XLR-4 Output Pagbelts have an XLR-4 (F) output connector and a 10A self-resetting thermal cut-out to protect the battery belt from accidental short circuit.

The Benchmark For over 30 years Pagbelts have been the battery belts against which all others have been judged. Fashioned from top quality, deep moulded leather, Pagbelts have a reputation for quality and reliability. Quality Designed and built under a strictly controlled quality assurance system, using quality materials and proven techniques, Pagbelts are guaranteed to give a long and effective service life even under the most demanding conditions.

Superior Cells Pagbelts now contain the latest Ni-MH cells, specially selected for their superior quality and excellent run-time. Ni-MH technology has greatly improved since its introduction to the industry approximately a decade ago. Customers can now expect a longer cycle life, if the battery belt is always charged with the integral overnight charger. Integral Charger Pagbelts incorporate a fully isolated, integral overnight charger, which is able to accept a Widerange input

supply, from 90V to 250V AC, 50Hz60Hz enabling worldwide operation. Over-Discharge Protection The Over Discharge Protection Model

Full Support Pagbelt NMH has a quick release buckle and fully adjustable strap. The heavier series of belts are provided with a clip-on shoulder harness, providing added support and comfort for the wearer during periods of demanding activity.

Voltage

Capacity

9212

Pagbelt NMH

12V

10Ah

9213

Pagbelt NMH

13.2V

10Ah 10Ah

9214

Pagbelt NMH

14.4V

9224*

Pagbelt NMH

24V

10Ah

9230*

Pagbelt NMH

30V

10Ah

* Supplied with shoulder harness.

PAG Camera Power Supplies. Compact & Lightweight The PAG Power Supply is compact and lightweight and connects directly to the battery mount on the rear of your camera. Compatibility Models are available that are compatible with the three most popular mounting systems: PAGlok, Sony V-Mount and Snap-on. Neat and Tidy No cables are required, other than the standard IEC power cable supplied with the unit. 50 Watts of Power The PAG Power Supply is capable of providing a full 50W, suitable for powering most broadcast cameras. It has a universal mains input of 90 to 270V, and features an LED power 'ON' indicator. The PAG Power Supply complies with all CE

Directives for EMC and Safety and the output is fully protected. Chargers & Power Supplies Alternatively, PAG Quasar chargers are available that contain power supply units suitable for running broadcast cameras (see Page11). The V4-CPA Camera Power Adaptor can be used in conjuction with the PAG V4-iPC and Cube chargers to do the same job (see Page12).

Camera Power Supplies 9791

PAGlok Connector 160 x 105 x 42mm* / 0.6kg

9791V V-Mount Compatible 160 x 105 x 47mm / 0.6kg 9798

Snap-on Compatible 160 x 105 x 47mm* / 0.6kg

* Excluding claws or studs

PAGBELT NMH / POWER SUPPLIES www.paguk.com

PAG Chargers. PAGLOK SYSTEM The secret of longer battery life. PAG ACS. Advanced Charging System.

PAG AR Series 2, Quasar & Pulsar charge PAG Li-Ion, as well as Ni-Cd and Ni-MH batteries of any reputable manufacturer, within the ranges 4.8V to 14.8V, and 1Ah to 10Ah.

PAG AR Series 2 chargers are available with either PAGlok connectors or NP1 pockets. The PAG Pulsar features Snapon compatible connectors, incorporating Talk-Circuits, which allow the charger to display data, recorded by PAG digital Li-Ion batteries, such as date of manufacture, serial number, Ah loaded, operating capacity, percentage state-of-charge, and battery temperature.

PAG AR124PLD Four-channel AR Series 2 Charger/Discharger

PAG QUASAR Ultra-compact two-channel charger (half the size of the AR124PLD).

The Quasar is available with either PAGlok connectors or Snap-on compatible connectors.

All chargers are easy to operate. Many have large backlit LCD displays, providing battery voltage and charge loaded information.

PAG AR Series 2, Quasar and Pulsar chargers employ Sequential Charging which can fully charge one battery a lot quicker than a simultaneous charger. Simultaneous charging distributes current over more than one battery at the same time, making the process longer. PAG sequential chargers are so efficient that in many cases two batteries can be charged faster than they can with simultaneous chargers of other manufacturers. All models are designed to high electrical standards, with RFI certification, and are suitable for use in all broadcast environments.

The Quasar incorporates an optional Camera Power Supply that provides a nominal 50W suitable for powering most professional broadcast cameras. In power supply mode the Quasar displays an accurate digital bar-graph of power consumption.

Quasar screen in power supply mode.

PAG ACS - Advanced Charging System PAG chargers are the most versatile and advanced microcomputercontrolled battery management systems in the industry. The PAG ACS software that controls the charging program will extend the working life of your batteries beyond anything that can be achieved using other systems.

managing them. Automatic ChargeRate Selection detects the batteryâ&#x20AC;&#x2122;s cell-chemistry, state-of-charge, capacity and condition, using only the batteryâ&#x20AC;&#x2122;s negative and positive terminals. The charger then applies the correct regime to achieve a fully charged battery with the maximum capacity and cycle life. The charge rate can be set manually to 2A, 3A, or 4A.

Automatic Charge-Rate Selection PAG acknowledges the wide variety of batteries that are available to the camera operator, in terms of cellchemistry, voltage and capacity, and has incorporated revolutionary software in its chargers that provides the easiest and most efficient way of

Charge More Batteries PAG all-chemistry chargers are suitable for charging PAG Li-Ion, Ni-MH and Ni-Cd batteries within the ranges 4.8V to 14.8V,1Ah to 10Ah. The front mounted PP90 sockets enable the charging of other battery formats, via the appropriate charge adaptor (see Page 15).

PAGLOK / SNAP-ON / NP1 CHARGERS www.paguk.com

Ni-MH and Ni-Cd batteries of other reputable manufacturers can be charged, as well as Sony & IDX V-Mount Li-Ion batteries. Variety of Features The features of each PAG charger vary to include 2 or 4 channels, a choice of battery connector, a camera power supply or a Discharge program. Batteries which have been repeatedly subjected to partial discharging will benefit from the analytic Discharge/Charge program which also measures and displays available battery capacity. Recovery Charge The Recovery Charge Program can be used to regain capacity lost as a result of extended storage or

operation under adverse conditions. An automatic maintenance charge is applied to Ni-Cd and Ni-MH batteries, after full charging, to keep them in peak condition and ready for instant use. This program is not required for Li-Ion batteries. Li-Ion Recovery PAG chargers incorporate a program that will automatically recover PAG Li-Ion batteries when the output has been shut down by the internal protection circuit. Worldwide Operation PAG charging systems automatically adjust to operate from AC mains supplies worldwide.

PAGLOK SYSTEM

PAG V-Series Parallel Charger. PAG Cube The PAG Cube is a new, ultra-compact, low-cost, simultaneous fast-charger. It features PAGâ&#x20AC;&#x2122;s own Intelligent Parallel Charging software, designed for the safe fast-charging of V-Mount Li-Ion batteries, of reputable manufacture. Extend Battery Life Charging is the most important factor in achieving an extended battery cycle life. PAG L95 Li-Ion batteries are capable of an average of three years active service, without substantial loss of capacity, when protected from abusive charging practices. V-Mount Compatible The Cube features four V-Mount compatible battery connectors and can also be used to sequentially fast-charge PAG V-Mount ZL-Series batteries and other V-Mount Ni-MH batteries of reputable manufacture. PAGlok Version PAG will introduce an all-chemistry PAGlok version of the 4-channel Cube charger (Model 9702) in the near future. Excellent Value Value for money is at the heart of the Cubeâ&#x20AC;&#x2122;s conception. Equivalent chargers from other manufacturers can cost more than three times as much.

Intelligent Parallel Charging This high-powered charger is capable of supplying 6A at 16.8V, approximately 100W. Charging is fast, efficient and fully-automatic thanks to PAG's unique Intelligent Parallel Charging. PAG iPC software incorporates three phases:

PAG Cube Charger Information Display The Cube incorporates a backlit LCD screen which indicates at all times the status of each channel. Ideal Location Charger The Cube is the ideal location charger. It is quiet and cool-running. It has a robust but lightweight

impact-resistant mouldedconstruction, incorporating an aluminium frame. It features a strong, moulded handle that enables you to carry the charger with four batteries connected. The handle can be retracted into the lid of the charger when not required, to maintain the compact dimensions of the unit. Future Proof The charger is capable of receiving firmware updates via its battery connectors, without the need to open the casing, which is both convenient and economic. Power Supply The Cube's power supply technology enables the charger to be powered from any AC power supply, worldwide.

Phase 1 Pre-Charge: Prepares shutdown or deeply discharged batteries for charge acceptance. Phase 2 Testing: Determines the type and state-ofcharge of the batteries, and the maximum current that can be applied.

Phase 3 Charging: The charger then shares the current intelligently between the channels, briefly addressing the most discharged batteries first, before simultaneously fullycharging all batteries as quickly and efficiently as possible.

PAG V4-CPA Camera Power Adaptor The PAG V4-CPA Camera Power Adaptor is a separate unit that enables you to power your camera from an AC mains supply, using the Cube charger. It is a compact, impact resistant unit that can be connected to any channel on the charger. Connection to the camera can be made using an XLR-4 male to female adaptor lead Model 9450. The V4-CPA outputs 16.8V at 5.5A and is suitable for use with modern broadcast cameras which are capable of being powered using 14.4V or 14.8V Li-Ion batteries.

The PAG V4-CPA can only be used in conjunction with the PAG Cube or V4-iPC chargers.

PAG V-SERIES CHARGER www.paguk.com

DV SOLUTIONS

PAG Low-Cost Chargers. Low-Cost Chargers for Low-Cost Batteries The PAG Freelancer and PAG V2 are ultra-compact, multi-chemistry low-cost chargers. They are designed to complement PAGâ&#x20AC;&#x2122;s low-cost L95e batteries, also available in PAGlok and V-Mount models. > The PAG Freelancer will charge Ni-Cd, Ni-MH and Li-Ion batteries in the ranges 12 to 14.8V, 1.5 to 10Ah. > The PAG V2 will charge Li-Ion and Ni-MH batteries made by PAG and Sony. Compact & Lightweight The chargers feature a tough but lightweight moulded construction ideal for location use. Each model is slightly larger than a PAG L95 battery and will fit easily into your camera bag. PAGlok, V-Mount and NP1 Two full-sized battery connectors are incorporated: PAGlok for the Freelancer and V-Mount for the V2. The Freelancer can be used to charge NP1 batteries via PAG NP1 Charge Adaptor Model 9574.

Li-Ion Recovery Both chargers incorporate a program for the recovery of Li-Ion batteries, when the output has been shut down by the internal protection circuit. Maximum Capacity After full-charge, the Freelancer may apply a balancing charge, and a maintenance charge to Ni-Cd or Ni-MH batteries, to keep them at their peak capacity. Status Display Comprehensive LED indication of battery and charger status is a common feature. The chargers are fully automatic in operation and constantly monitor every process. Worldwide Operation Both chargers can be powered from any AC mains supply worldwide, or from a vehicle battery with the PAG DC/DC Converter Model 9774, (see Page 15 ).

PAG Chargers. 4 x PAGlok connectors

PAGlok

PAG AR124PLD Model 9792

2 x PP90 sockets

Ni-Cd, Ni-MH & Li-Ion

4.8 to 14.8V, 1 to 10Ah

Discharger

Camera Power Supply

PAGlok

PAG QUASAR Model 9726

Ni-Cd, Ni-MH & Li-Ion

12 to 14.8V, 1.5 to 10Ah

4.8 to 14.8V, 1 to 10Ah

V-Mount

PAG CUBE Model 9702V

PAG Freelancer Model 9613 2 x PAGlok connectors only

2 x PP90 sockets

PAG V2 Model 9613V

4 x V-Mount connectors only

2 x V-Mount connectors only

Li-Ion & Ni-MH (PAG & Sony)

Intelligent Parallel Charging

LOW-COST CHARGERS www.paguk.com

2 x PAGlok connectors

4 x PP90 sockets

2 x PAGlok connectors

PAG QUASAR Model 9752

PAG Chargers.

4 x NP1 pockets 4 x PP90 sockets

Snap-on

NP1

PAG AR124NPD Model 9793

PAG PULSAR Model 9795 4 x Snap-on compatible 4 x PP90 sockets

Ni-Cd, Ni-MH & Li-Ion

4.8 to 14.8V, 1 to 10Ah

Discharger

Discharger & Talk-Circuits

2 x Snap-on compatible 2 x PP90 sockets

Snap-on

PAG QUASAR Model 9753

PAG QUASAR Model 9727 2 x Snap-on compatible 2 x PP90 sockets

Ni-Cd, Ni-MH & Li-Ion

4.8 to 14.8V, 1 to 10Ah

Camera Power Supply

V-Mount

Chip -Upgrades

PAG V4-CPA Model 9701V

PAG chargers are forward compatible. Older models can be upgraded to charge new batteries by purchasing a chip upgrade kit.

Camera Power Adaptor For use with PAG Cube and V4-iPC chargers Outputs 16.8V at 5.5A Requires Model 9450 XLR-4 male to female connector.

PAG AR Series 2 Chip-Upgrade for 9792, 9793, 9794 and 9795 (green or yellow labels) for charging all PAG Li-Ion batteries, including L95e. Model 9670E Quasar Chip-Upgrade for charging PAG L95e batteries. Model 9670QE

PAG Chargers at a Glance. No:

Name:

Connectors:

Size:

Weight:

Special Features:

9792

PAG AR124PLD

4 x PAGlok connectors

4 x PP90

82 x 168 x 240mm

1.23kg

Discharge Program

9752

PAG QUASAR

2 x PAGlok connectors

2 x PP90

72 x 135 x 185mm

0.88kg

Power Supply

9726

PAG QUASAR

2 x PAGlok connectors

2 x PP90

72 x 135 x 185mm

0.88kg

9613

PAG Freelancer

2 x PAGlok connectors

55 x 115 x 135mm

0.41kg

9702V

PAG Cube

4 x V-Mount Connectors

157 x 157 x 157mm

1.19kg

9613V

PAG V2

2 x V-Mount Connectors

72 x 112 x 133mm

0.43kg

9793

PAG AR124NPD

4 x NP1 pockets

4 x PP90

78 x 142 x 240mm

1.07kg

Discharge Program

9795

PAG PULSAR

4 x Snap-on compatible

4 x PP90

82 x 168 x 240mm

1.23kg

Discharge Program & Talk Circuits

9753

PAG QUASAR

2 x Snap-on compatible

2 x PP90

80 x 135 x 185mm

0.84kg

Power Supply

9727

PAG QUASAR

2 x Snap-on compatible

2 x PP90

80 x 135 x 185mm

0.84kg

Intelligent Parallel Charging

PAG 24V to 30V Ni-Cd Chargers. PAG continues to manufacture 30V AR Series chargers optimised for charging 24V to 30V Ni-Cd batteries. They are available in single or four-channel models and incorporate XLR-4 (M) connectors.

Contact the PAG Sales Department for information about PAG 30V AR Series Chargers.

CHARGERS www.paguk.com

PAG Charging Adaptors.

Intelligent V-Mount Charge Adaptor Model 9610 Incorporating circuits required for charging all Sony Li-Ion batteries via the front PP90 (2.1mm) sockets of PAG AR Series 2, Pulsar and Quasar all-chemistry chargers.

V-Mount Charge Adaptor Model 9617 Charge Adaptor for PAG V-Mount compatible batteries, for charging via the front PP90 (2.1mm) sockets of PAG AR Series 2, Pulsar and Quasar chargers. 76 x 50 x 25mm / 66g

76 x 50 x 25mm / 66g

NP1 Charge Adaptor Model 9574

NP1 Power Adaptor Model 9632

Enables the charging of NP1 batteries (Ni-Cd, Ni-MH or Li-Ion) from the PAGlok connectors of the PAG Freelancer charger.

Utilises NP1 format batteries for powering Radio Microphone Receivers. The unit incorporates 4 auxiliary switched outputs, and over-current protection.

NP1 Pocket to PAGlok Connector.

NP1 pocket to SQN-4S connector.

Vehicle Battery Power Converter Model 9774 This DC/DC Converter enables you to power a PAG charger from your vehicleâ&#x20AC;&#x2122;s battery via the cigar lighter socket. 111 x 60 x 30mm / 500g Suitable for use with the following PAG chargers: PAG AR Series 2 PAG Freelancer PAG Quasar PAG Pulsar

CHARGING ADAPTORS www.paguk.com

PAG 12V AR Series PAG MC124 Pagbelt integral charger

ADAPTORS

PAG Battery Mounts and Adaptors.

Battery Mounts and Adaptors The PAGlok battery mounting system was first developed as an alternative to the Anton-Bauer system, in the days when portable electronic video cameras were in their infancy. The range of PAGlok Connectors grew as new cameras and ancillary equipment were introduced. Adaptors that provide compatibility between the Anton-Bauer and PAG systems have

always been available from PAG. Now that Sonyâ&#x20AC;&#x2122;s V-Mount system has been widely adopted, PAG provides its own version of the V-Mount battery connector for use with a wide range of cameras and equipment. PAG also provides adaptors that allow compatibility between Sony and PAG products, including the PAG Snap-on range of batteries.

PAGlok Connector Model 9522/-

PAG V-Mount Connector Model 9522V

The PAGlok Connector provides a secure mechanical and electrical connection between the battery and the camera. Features of the PAGlok Connector include a PP90 (2.1mm DC) socket to enable the powering of a camera light.

The PAG V-Mount Connector provides a secure mechanical and electrical connection between the battery and the camera.

V-Mount to PAGlok Adaptor Model 9522/64 Adapts the Sony V-Mount for use with all PAGlok batteries.

Model 9522/58

PAGlok to V-Mount Adaptor Model 9512 Adapts the PAGlok Connector for use with V-Mount batteries.

Adapts the Sony V-Mount for use with lighter PAGlok batteries.

Snap-on to PAGlok Adaptor Model 9518

PAGlok to Snap-on Adaptor Model 9517

Adapts the Anton-Bauer Snap-on camera mount for use with PAGlok batteries.

Adapts the PAGlok connector for use with PAG Snap-on compatible batteries.

Snap-on to V-Mount Adaptor Model 9510

V-Mount to Snap-on Adaptor Model 9511

Adapts the Anton-Bauer Snap-on camera mount for use with V-Mount batteries.

Adapts the Sony V-Mount connector for use with PAG Snap-on compatible batteries.

PAGlok Belt Clip Model 9522/60 A PAGlok Connector that clips onto your trouser belt. Incorporates 2 x PP90 (2.1mm DC) sockets for powering a camera light and a 7.2V camcorder via a 12V DC Adaptor (see Page 23).

BATTERY MOUNTS www.paguk.com

PAG Dual Battery Mounts for All Systems. The PAG Power Plate is a dual battery mount that enables two PAG L110, L95 or ZL-50 batteries (PAGlok or V-Mount) to be used in parallel, providing a combined capacity, and a higher current-draw capability. It is compatible with the three most popular mounting systems: PAGlok, V-Mount, and Anton-Bauer. The combined capacity is ideal for powering a camcorder and camera light simultaneously for extended periods. Combining the capacities of two 95 watt-hour Li-Ion batteries is preferable to using one higher capacity battery because sharing the load ensures that you do not discharge a single battery at an excessive rate. Additionally, civil aviation and air transport regulations state that no more than two batteries, having capacities greater than 100 watthours, can be taken on board aircraft, whereas there is no restriction on the number of L95s.

BATTERIES

The combined weight of the Power Plate and two L95s is 1.87kg, less than a single Ni-Cd SuperPack of the equivalent voltage. This weight is an ideal counterbalance for the weight of the lens. The Power Plate incorporates a charge-status indicator that relates to the voltage output of the batteries connected. Models for cameras fitted with the Sony V-Mount incorporate a PP90 socket for powering the Paglight. PAGlok Power Plates

For PAGlok L110s, L95s & ZL-50s Model 9551 PAGlok Mount Model 9552 Snap-on Mount Model 9553 V-Mount V-Mount Power Plates

For V-Mount L110s, L95s & ZL-50s Model 9551V PAGlok Mount Model 9552V Snap-on Mount Model 9553V V-Mount

PAGlok Related Accessories. PAGlok Powerbelt A belt-mounted series/parallel unit for use with PAGlok batteries. Output is via 1 x XLR-4 socket. Model 9527

Left sidefacing Kit Model 9620

PAGlok Battery Carrying Belt A convenient way of carrying two PAGlok batteries to provide offcamera power for a range of applications. Model 9523

PAGlok Power Module The PAGlok Power Module is a compact, lightweight unit designed to supply continuous power from two PAGlok batteries for editing equipment, remote cameras or microwave links. PAGlok batteries of any chemistry, capacity and state-of-charge can be used. Output is via an XLR-4 socket. A third power source, such as a Pagbelt can be connected via the XLR-4 input socket. Two Power Modules can be linked to provide seamless power from up to five power sources. Model 9663 features a regulated 7.2V output and a carrying strap is provided with each model. PAGlok Power Module 12 to 14.4V 135 x 115 x 55mm / 410g Model 9661

PAGlok Power Module 12 to 14.4V / 7.2V 135 x 115 x 55mm / 410g Model 9663 Connecting Lead Model 9664

Series/Parallel Power Module This series/parallel unit can be used to connect two PAGlok batteries in series; it produces an output voltage equal to the sum of the two batteriesâ&#x20AC;&#x2122; individual voltages (up to 30V), for applications such as powering lighting or microwave links. Connecting the batteries in parallel produces a capacity equal to the sum of the two batteriesâ&#x20AC;&#x2122; individual capacities (up to 14Ah, for extended equipment run-time). This mode provides continuous operation. Output is via 1 x XLR-4 socket. Model 9581

POWER PLATE / PAGLOK SYSTEM www.paguk.com

Right sidefacing Kit Model 9621

Radio Microphone Receiver Holders Designed for use with cameras fitted with the PAGlok connector (not included), to enable the mounting of a radio microphone receiver. In most cases the holder is fitted between the battery mount and the camera whilst allowing the routing of any fixed wires through a central aperture.

Dual Kit Model 9622

Receivers are held on a left or right side-facing plate, with velcro straps. Kits which enable the mounting of two receivers, and kits for use with the V-Mount to PAGlok adaptor are also available. Model 9620 Left side-facing Kit Model 9621 Right side-facing Kit Model 9622 Dual Kit Model 9623 For use with PAGlok to V-Mount Connectors Models 9522/ 58 & 9522/64.

For use with PAGlok to V-Mount Connectors Models 9522/58 & 9522/64. Model 9623

PAGLIGHT PAGLIGHT

Paglight. The Industry Standard.

Paglight The original halogen or arc 12V broadcast camera light. Features detachable power base. Still the most versatile light in the industry (Page 19). > Reflector: 45mm dia.

Paglight M Miniaturised version of the 12V Paglight for use with smaller digital camcorders. Features detachable power base (Page 23). > Reflector: 35mm dia.

Paglight C6 An all-inclusive 6V lighting kit, incorporating 6V battery and charger, designed for use with small camcorders (see PAG DV Solutions Book). > Reflector: 35mm dia.

Paglight L A 250W hand-held location fill-light or ‘basher’ available in 24V and 30V models (Page 25). > Reflector: 60mm dia.

Used throughout the world by news broadcasting organisations, Paglights are the ultimate in camera lighting. The original 12V Paglight was the first on-board camera light designed specifically to meet the requirements of the broadcast industry. PAG now offers a family of lights, designed to fulfil a variety of professional requirements, but sharing many of the unique features that made Paglight the industry standard. Paglights are robust, light in weight, cool-running and fully-focusable. Their versatility has been achieved as a result of PAG’s patented plugin lamp holder feature. This is best illustrated in the original 12V professional Paglight which is capable of both tungsten halogen and metal-halide arc light output. Plug-in lamp holder options for this light also include Softstart, for use with Li-Ion batteries, and the powersaving, regulated PowerMax unit, which incorporates a dimming facility called VariLux (see Page 19). Paglight M was introduced to suit the dimensions of the smaller, digital camcorders. This miniaturised version of the 12V Paglight can be powered from a range of 12V to 14.8V battery packs and belts. The plug-in PowerArc option makes Paglight M the industry’s most compact yet powerful arc light. A Softstart lamp holder is also

available for use with Li-Ion batteries. Paglight M can be mounted to the camera using a variety of detachable power bases (see Page 23). For small camcorder users, whether professional or consumer, the Paglight C6 Kit is an ideal solution. This self-contained, high-quality 6V system provides everything you need - Paglight, diffuser, dichroic, barndoors, battery and charger at a price to suit any equipment budget (see PAG DV Solutions Book). Paglight L is a 250W ‘basher’ or fill-light, available in 24V and 30V models. It is the perfect hand-held location light with many features of PAG’s original on-board camera light: quick and easy lamp changing, detachable power base and a range of accessories (see Page 25). LED Technology is improving all the time, addressing many of the problems that early examples displayed, such as poor spectral distribution and colour temperature. Using improved LED technology PAG intends to offer a plug-in LED option for the Paglight, to further increase its versatility and provide you with the most economical LED solution.

PAGLIGHT FAMILY www.paguk.com

PAGLIGHT

Paglight. The worldâ&#x20AC;&#x2122;s most versatile camera light.

Plug-in PowerArc

Detachable power base Paglight is a revolutionary camera light, the first specifically designed to suit professional ENG/EFP requirements, and answer the many requests for an all-embracing, single operator camera light. PAG's unique patented design makes Paglight the coolest running and most versatile camera light in the industry. Interchangeable plug-in lamp holders fit into the back of the lamp body. Variants of wattage and unit type can be exchanged without handling the lamp. There are four lamp holder options, three of which accept standard bi-pin halogen lamps.

Standard Lamp Holder Accepts 20W, 35W, 50W, 75W and 100W halogen lamps. Softstart Lamp Holder Prevents the cold lamp start-up surge from activating the over-current protection circuits within Li-Ion batteries. (Not required when using the lamp output on a Sony camera). PowerMax Control/VariLux A voltage regulated unit that prolongs battery run-time and saves lamp filament life. VariLux is a lamp

dimming facility which also conserves battery power.

from spot to flood. It has a soft, even spectral distribution

PowerArc Paglight can be instantly converted to HMI by plugging in the PowerArc unit. The arc lamp consumes only 24W but provides the equivalent of 100W of daylight output. The ability to convert from halogen to HMI makes the Paglight the industryâ&#x20AC;&#x2122;s most versatile camera light.

Rotatable Accessory Kit This accessory holding ring holds any combination of snap-in barn doors (tapered or parallel), dichroic filters or diffuser and can be fitted to the front of the light. The assembly can be rotated easily to give the desired configuration.

Fully Focusable Paglight is continuously focusable with a beam angle that is variable

Paglight is the coolest running light in the business

Softlight Diffuser & Filter Kit This filter holding assembly fits onto the barndoors and enables you to create supersoft lighting or special effects with colour filters. Paglight Power Bases Low-profile, pre-wired, hot-shoe power bases enable the Paglight to be easily and quickly mounted to, or removed from the camera. Power bases are available with a variety of connectors, such as PP90, XLR-4, Snap-on or SX (D-Tap) and a variety of lead lengths, suitable for use with most professional cameras and power sources.

Registered Design No. 2071515 Patent No. 2335027

PAGLIGHT www.paguk.com

Paglight Options. Paglight SX Model 9966

Paglight PP90 (Softstart) Model 9944

> SX Power Base with D-Tap connector (lead length 150mm) for use with light output on Sony camera

> PP90 Power Base (lead length 500mm) for use with 2.1mm light output on PAGlok Connector

> Includes Standard halogen lamp holder (Sony camera has Softstart function for use with Li-Ion batteries)

> Includes Softstart halogen lamp holder suitable for use with Li-Ion batteries

> 20W or 35W lamps required

> Lamps and filter ring sold separately

> Includes Stud Adaptor & Shoe Plate

> For use with 20W or 35W lamps only

> Includes Stud Adaptor & Shoe Plate

Paglight Snap-on (Softstart) Model 9945

Paglight PP90 Model 9964

> Snap-on Power Base with D-Tap connector (lead length 500mm) for use with light output on Anton-Bauer battery mount

> PP90 Power Base (lead length 500mm) for use with 2.1mm light output on PAGlok Connector

> Includes Softstart halogen lamp holder suitable for use with Li-Ion batteries

> Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries

> For use with 20W or 35W lamps only

> Lamps and filter ring sold separately

> Includes Stud Adaptor and Shoe Plate

Paglight Snap-on Model 9965

Paglight PP90 (PowerMax) Model 9946

> Snap-on Power Base with D-Tap connector (lead length 500mm) for use with light output on Anton-Bauer battery mount

> PP90 Power Base (lead length 500mm) for use with light output on PAGlok Connector

> Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries > Lamps and filter ring sold separately > Includes Stud Adaptor and Shoe Plate

> Suitable for use with Ni-MH or Ni-Cd batteries > PowerMax halogen lamp holder provides dimming facility and voltage regulation for longer battery run-time > Lamps and filter ring sold separately > Includes Stud Adaptor and Shoe Plate

Paglight Snap-on (PowerMax) Model 9948

Paglight XLR-4 Model 9956

> Snap-on Power Base with D-Tap connector (lead length 500mm) for use with light output on Anton-Bauer battery mount

> XLR-4 Power Base (lead length 1.5m) for use with XLR-4 output on Pagbelts or Powerman batteries

> Suitable for use with Ni-MH or Ni-Cd batteries

> Standard halogen lamp holder

> PowerMax halogen lamp holder provides dimming facility and voltage regulation for longer battery run-time

> Lamps and filter ring sold separately > Includes Stud Adaptor and Shoe Plate

Paglight XLR-4 (PowerMax) Model 9947 > XLR-4 Power Base (lead length 1.5m) for use with XLR-4 output on Pagbelts or Powerman batteries > Suitable for use with Ni-MH or Ni-Cd batteries > PowerMax halogen lamp holder provides dimming facility and voltage regulation for longer battery run-time

SOLD SEPARATELY (see Page 21): 20W, 35W 50W, 75W and 100W halogen lamps Rotatable Accessory Kits (diffuser, dichroic filter and barndoors) PowerArc Unit and Arc lamp Lamp Protectors Softlight Diffuser and Filter Kit Universal mounting options (see Page 26)

> Lamps and filter ring sold separately > Includes Stud Adaptor and Shoe Plate

PAGLIGHT OPTIONS www.paguk.com

PAGLIGHT

Paglight System.

9967 Arc Lamp 9954 Parallel Barn Doors

9951 Dichroic Filter (halogen to daylight)

9973 PowerArc Conversion Filter (daylight to halogen)

9955 PowerArc (includes Lamp Protector)

GY6.35 12V Lamps

9930 20W Lamp 9968 Lamp Protector

9963 Tapered Barn Doors

9952 Diffuser

9958 PowerMax/VariLux (includes Lamp Protector)

9931 35W Lamp

9953 Rotatable Accessory Holder (ring only)

9912 50W Lamp

9938 Softstart (includes Lamp Protector)

9932 75W Lamp

9959 Rotatable Accessory Kit Comprises: Ring, Dichroic, Diffuser & Parallel Barn Doors 9983 Softlight Diffuser and Filter Kit for ultra-soft or colour lighting effects. Comprises: 2 x Filter holders 2 x Softlight diffusers 2 x Full CT blue filters 2 x Half CT blue filters 2 x Half CT orange filters (See price list for Model Nos. of individual parts).

9911 100W Lamp

9950 Standard Lamp Holder (includes Lamp Protector)

9957 PP90 Power Base (500mm), 9943 (1m), 9986 (150mm)

9960 XLR-4 Power Base (1.5m)

9969 Wattage Label Kit Colour coded wattage identification labels for Standard Lampholders

9961 Snap-on Power Base (500mm)

9962 Sony SX Power Base (150mm)

> See Universal Mounting Options on Page 26. Registered Design No. 2071515, Patent No. 2335027

9987 Base Locking Adaptor

Power-to-Light Adaptors These useful accessories enable you to power a Paglight or a Paglight M with a PAGlok or Snap-on compatible battery. A convenient, alternative way of powering and positioning an additional light source on location.

PAG Power-to-Light Adaptors

9992

9995

PAGLIGHT SYSTEM www.paguk.com

PAGlok Connector to Paglight

9994

PAGlok Connector to Paglight M

9992

Snap-on compatible connector to Paglight

9995

Snap-on compatible connector to Paglight M

9991

9994

9991

PAGLIGHT KITS

Paglight Kits incorporating Pagbelt NMH.

Paglight Kits are designed to provide everything required for a lighting source that can be used either on or off camera.

Paglight Kits are supplied in a fitted flight case and comprise:

The Paglight incorporates a standard halogen lamp holder and a choice of 2 bi-pin halogen lamps (20W, 35W, 50W, 75W or 100W). The light is fitted with a professional accessory holder that includes a daylight filter, a diffuser and two parallel barn doors. A handle is included for offcamera use. A stud adaptor and a camera shoe plate are included for mounting the light to the camera. The XLR-4 Power Base enables the Paglight to be powered from the battery belt supplied.

> XLR-4 Power Base (lead length 1.5m).

The Pagbelt NMH battery belt is a 10Ah power source, available in 12V or 13.2V formats, ideal for powering lights of up to 100W. It incorporates an integral overnight charger.

> Paglight (12V).

> Standard Lamp Holder > A choice of 2 lamps (20W, 35W, 50W, 75W or 100W). > Rotatable Accessory Kit comprising: 1 accessory ring, 1 pair of parallel barn doors, 1 dichroic filter and 1 diffuser. > Pagbelt NMH with integral overnight charger and a power lead suitable for country of use (not shown). There is a choice of 12V or 13.2V 10Ah Pagbelts. > Handle. > Camera shoe plate 1/4” Whit. > Stud adaptor 1/4” Whit.

Paglight PowerArc Field Kit. Paglight PowerArc Field Kit incorporates the PAG PowerArc HMI unit and two standard halogen units, enabling you to take full advantage of the unique plug-in lamp holder system that makes Paglight the industry’s most versatile camera light. Converting the Paglight from halogen to Arc takes a matter of seconds. The kit is tailored to your requirements with a choice of Power Base, suitable for the light ouput on most cameras (PP90, D-Tap or XLR-4), and a choice of two halogen lamps (20W, 35W, 50W, 75W or 100W). The light is fitted with a rotatable accessory holder that includes a daylight filter, a diffuser and two parallel barn doors. A dichroic filter that converts the light output to match halogen is included for use with the PowerArc. A stud adaptor and a camera shoe plate are included for mounting the light to the camera. A Camera Clamp is included for mounting the Paglight to a camera handle, or offcamera. A handle is included for handheld use. The components are housed in a strong, lightweight and compact fitted flight case.

The Paglight PowerArc Field Kit comprises: A

Paglight 12V.

Choice of Power Base (PP90, D-Tap or XLR-4).

Standard lamp holder (with choice of lamp 20W, 35W, 50W, 75W or 100W).

Standard lamp holder and protector (with choice of lamp).

PowerArc Unit and protector (with arc lamp).

Rotatable Accessory Kit comprising: accessory holder, 1 pair of parallel barndoors, 1 dichroic filter and 1 diffuser.

Tapered Barndoors.

PowerArc Conversion Filter.

Handle 1/4” Whit. bush / stud.

Camera Clamp 1/4” Whit. bush.

Camera Shoe Plate 1/4” Whit.

Stud Adaptor 1/4” Whit.

Fitted Flight Case.

Storage space for additional components.

B I

Paglight PowerArc Field Kit Model Size 9825

Weight

468 x 386 x 109mm 3kg

PAGLIGHT KITS www.paguk.com

Paglight M. 12V miniature camcorder light.

PAGLIGHT M

greater than anything that can be achieved using LED lights, and yet the power consumption is relatively low. Halogen Both halogen lamp holders utilise 10W, 20W and 35W standard G4size 12V halogen lamps. Wattage variants can be changed without the need to handle the lamp. When not in use, each lamp holder can be stored in a heat-resistant polymer lamp protector. Lamp holders are supplied with wattage identification labels. Softstart Softstart prevents the cold lamp start-up surge from activating the over-current protection circuits within Li-Ion batteries. Rotatable Accessory Ring A rotatable accessory ring including snap-in barn doors, a dichroic filter, and a diffuser, can be fitted to the front of the light.

Ultra-Compact The Paglight M is an ultra-compact 12V light that embodies many features of the larger Paglight. It has a 35mm reflector and measures 90mm from front to back. Its reduced proportions complement perfectly the new generation of smaller broadcast digital camcorders, as well as DV and high-definition hand-held camcorders. Cool-Running Paglight M is constructed from a glass-reinforced engineering

polymer that provides strength and temperature stability. PAG’s patented design ensures the Paglight M is cool-running at all times. Fully Focusable The PowerArc produces a soft, clean and even spectral distribution which is fully-focusable, from spot to flood. Plug-in Lamp Holders The plug-in lamp holder system makes lamp changing quick and easy. A choice of standard halogen,

12V DC Adaptors.

PAG has designed a range of 12V DC Adaptors for use with DV and HDV hand-held camcorders. The DC Adaptor enables the camcorder to be powered by 12V to 14.8V

PAGLIGHT M www.paguk.com

Softstart or PowerArc lamp holders is available.

Softlight Diffuser and Filter Kit This useful accessory fits onto the barndoors and enables you to create super-soft lighting or special effects with colour filters.

Daylight Power The PowerArc enables the Paglight M to be instantly converted from halogen into the world’s most compact yet powerful mini-HMI camera light. The PowerArc utilises a 24W lamp which has an output equivalent to 100W of halogen light, but at daylight colour temperature. The quality and projection of the light output is far

Paglight Power Bases Paglight M incorporates a hot-shoe type power base with a flying lead. A variety of connectors is available, suitable for most camcorders. The power base features a 1/4” Whit. thread. This allows the unit to be mounted to the camera via a variety of universal mounting options (see Page 26).

Model

Camcorder

professional battery packs or belts, providing a higher current-draw capability and extended run-time. It is also possible to power a 12V Paglight M from the same power source.

9680/01

Canon XL1, XL2

PP90

9680/02

Sony DSR 200

PP90

9680/03

Sony PD150, PD170, A1

PP90

9680/04

Panasonic AG-DVX100, HVX200

PP90

9680/05

Sony HDR-FX1-Z1

PP90

The DC Adaptor connects to the battery port of the camcorder and the chosen power output source: either the PP90 (2.1mm DC) power port of a PAGlok Belt Clip, or the XLR-4 (M) output of a Pagbelt NMH battery belt. Both power sources can be worn around the waist or attached to a tripod.

9655/01

Canon XL1

XLR-4

PAGlok Power Adaptors are PAGlok Connectors that incorporate a built-

Connector

9655/02

Sony DSR 200

XLR-4

9655/03

Sony PD150, PD170, A1

XLR-4

9655/04

Panasonic AG-DVX100, HVX200

XLR-4

9655/05

Sony HDR-FX1-Z1

XLR-4

9522/75

JVC HD100

PAGlok Power Adaptor

9522/77

Canon XL-H1

PAGlok Power Adaptor

in 12V DC Adaptor suitable for powering certain camcorders.

These adaptors are mounted to the back of the camcorder.

Paglight M Options and System. Paglight M Snap-on Model 9003

Paglight M PP90 Model 9001 Standard Lampholder

For use with Ni-MH PAGlok batteries. Softstart Lampholder should be used with Li-Ion batteries.

PP90 Power Base (500mm)

Shoe Plate

Stud Adaptor

For use with the Snap-on mount, and Ni-MH batteries. Softstart Lampholder should be used with Li-Ion batteries.

Snap-on Power Base (500mm)

Standard Lampholder

Shoe Plate

Stud Adaptor

Paglight M SX Model 9004

Paglight M PP90 Model 9001L Standard Lampholder

For use with Ni-MH PAGlok batteries. Softstart Lampholder should be used with Li-Ion batteries.

PP90 Power Base (1.5m)

Shoe Plate

Stud Adaptor

Paglight M XLR-4 Model 9002 For use with camcorders that incorporate an XLR-4 output, or to power from a Pagbelt NMH.

XLR-4 Power Base (1.5m)

Standard Lampholder

Shoe Plate

For use with the Sony SX camera.

SX Power Base (150mm)

Standard Lampholder

Shoe Plate

Stud Adaptor

SOLD SEPARATELY (see below): Softstart lamp holders 10W, 20W & 35W halogen lamps Rotatable Accessory Kits (diffuser, dichroic filter and barn doors) Softlight Diffuser and Filter Kit Universal mounting options (see Page 26)

Stud Adaptor

G4 12V Lamps

9011 Barn Doors (pair)

9009 Dichroic Filter 9023 PowerArc Conversion Filter

9010 Diffuser

9008 Accessory Holder (ring only)

9021 Lamp Protector

9017 Softstart Lamp Holder (Lamp protector & wattage labels)

9018 12V 10W

9019 12V 20W 9007 Rotatable Accessory Kit comprises Accessory Holder, 1 pair of Barn Doors, 1 Dichroic Filter and 1 Diffuser

9020 12V 35W

9016 Standard Lamp Holder (Lamp protector & wattage labels)

9983 Softlight Diffuser and Filter Kit for ultra-soft or colour lighting effects. Comprises: 2 x Filter holders 2 x Softlight diffusers 2 x Full CT blue filters 2 x Half CT blue filters 2 x Half CT orange filters

9012 PP90 Power Base (500mm)

9013 XLR-4 Power Base (1.5m)

9022 PowerArc

(See price list for Model Nos. of individual parts). 9014 Snap-on Power Base (500mm) 9025 PowerArc Lamp

> See Universal Mounting Options on Page 26.

9015 SX Power Base (150mm)

PAGLIGHT M OPTIONS / SYSTEM www.paguk.com

PAGLIGHT L

Paglight L. 250W hand-held location lighting.

24V or 30V 250W Paglight L.

24V or 30V 10Ah Pagbelt NMH is the ideal power source for the 250W Paglight L.

Location Basher This compact and portable 250W hand-held fill-light is available in 24V and 30V models, and incorporates many features of PAGâ&#x20AC;&#x2122;s on-board camera light. Fully-Focusable Focusing is provided by a lever situated on the side of the lamp body and is continuously variable from narrow to wide angle. Plug-in Lampholders A lampholder unit plugs into the rear of the light and is locked in position. It can be easily withdrawn, making lamp replacement safe and quick. Heat Dissipation The lamp body and reflector housing are constructed to maximise the dissipation of heat as well as to provide strength and impact resistance.

Perfect Positioning The lamp body has a multidirectional mounting and may be adjusted vertically and horizontally. The desired position can be maintained by a locking lever situated on the side of the light base. Detachable Power Base The 250W Paglight has a detachable power base that incorporates a lead terminated with an XLR-4 connector. This can be used to power the light from a Pagbelt NMH battery belt. Paglight L Kits are available that include either a 24V or 30V Pagbelt (see below). The Paglight base incorporates a 1/4â&#x20AC;? Whit bush which enables the light to be mounted to a tripod or a handle using one of the Universal Mounting Options (see Page 26).

250W Paglight Options

30V 250W Lamp Holder

24V 250W Lamp Holder

XLR-4 Power Base (1.5m)

Paglight L24 Model 9031

XLR-4 Power Base (1.5m)

Paglight L30 Model 9032

> Accessory Kit, handle, lamp protector and lamps are sold separately.

250W Paglight Kits Incorporating Pagbelt NMH. Paglight 250W Kits: Comprise: Paglight, XLR-4 power base (lead length 1.5m), plug-in lamp holder, accessory ring, diffuser, dichroic filter, parallel barn doors (pair), handle, 2 x 250W lamps, Pagbelt NMH with integral overnight charger, AC power lead for country of use and fitted flight case.

PAGLIGHT L 250W www.paguk.com

Paglight L24 Kit

(24V 10Ah Pagbelt NMH)

Paglight L30 Kit

(30V 10Ah Pagbelt NMH)

MOUNTING OPTIONS

Paglight L24 & L30 System. 9033 Rotatable Accessory Kit: Ring, Diffuser, Dichroic and Parallel Barn Doors

9038 Tapered Barn Doors (pair)

9037 Parallel Barn Doors (pair)

9040 30V Lamp Holder and Protector 9914 30V 250W lamp

9036 Diffuser

9039 24V Lamp Holder and Protector

9035 Dichroic Filter 9034 Accessory Holder (ring only)

9913 24V 250W lamp

9960 XLR-4 Power Base (1.5m) See Universal Mounting Options below

Universal Paglight Mounting Options. These useful accessories enable any Paglight to be mounted to any camera, tripod, lighting rig or gaff grip

9971 Stud Adaptor male to male 1/4” Whit.

9972 Camera Shoe Plate 1/4” Whit.

9990 Extender Arm 1/4” Whit. Lifts the Paglight clear of the microphone, and allows the subject to be lit from the side. Includes shoes for Sony and Panasonic mounts.

9807 Camera Clamp bush 1/4” Whit. Clamps the Paglight to the handle of the camera.

9978 Mounting Adaptor Kit: comprises 9971, 9974, 9975, 9976 & 9977 9990 Paglight Extender Arm. Enables you to position the camera light to the side of the subject or away from the microphone to avoid the casting of shadows. 9906 Handle stud to bush1/4” Whit. (length 127mm)

9985 Spigot Adaptor 1/2” dia. to 1/4” Whit.

9974 Thread Adaptor 3/8” dia. to 1/4” Whit.

9976 Spigot Pin 5/8” dia. to 1/4” Whit.

9975 Spigot Pin 1/2” dia. to 1/4” Whit.

9977 Multi-Configuration Spigot Adaptor: 5/8", 1/2" and 1/4” dia. in-line or 90° conversion.

PAGLIGHT L OPTIONS / MOUNTING ADAPTORS www.paguk.com

Specifications. PAG L95e Battery

PAG L95 Time Battery

Model No. 9310 PAGlok professional battery connector.

Model No. 9382 PAGlok professional battery connector.

Model No. 9310V Sony V-Mount compatible battery connector.

Model No. 9360 Sony V-Mount compatible battery connector.

Construction: The casing for these models consists of high-impact polycarbonate injection mouldings, featuring an internal cradle designed to protect the cells from impact damage. The cells have welded interconnections of low-resistance nickel strap. The batteries are sealed and non userserviceable.

Model No. 9383 PAG Snap-on compatible battery connector.

Cells: Premium grade Lithium-Ion sealed rechargeable cylindrical cells. Voltage: 14.8V nominal. The battery contains 12 cells connected in series/ parallel. Each cell has a nominal voltage of 3.7V.

Cells: Premium grade Lithium-Ion sealed rechargeable cylindrical cells.

Capacity: Nominal 6.5 ampere-hours, with a charge voltage of 4.2V per cell.

Voltage: 14.8V nominal. The battery contains 12 cells connected in series/ parallel. Each cell has a nominal voltage of 3.7V.

Output Current: Rated maximum continuous output current is 7.0 amperes.

Capacity: Nominal 6.5 ampere-hours.

Output Current: Rated maximum continuous output current is 7.0 amperes.

Operating Temperature Range: Optimum discharge efficiency is achieved within the temperature range +10°C to +40°C. PAG Power & Time Circle Display: A single button-press displays charge status in terms of percentage. The LEDs light clockwise, from the top right round to top left. 5 LEDs 4 LEDs 3 LEDs 2 LEDs 1 LED 1 LED flashing

= = = = = =

> 90% 70 - 90% 50 - 70% 30 - 50% 10 - 30% 0 - 10%

remaining remaining remaining remaining remaining remaining

The display is also capable of indicating an estimate of remaining runtime, on-load: > The second button-press activates the time display. > The ‘HRS’ LED will flash twice. > The number of remaining hours will be indicated by the number of lit LEDs: each LED represents 1 hour. > The ‘MINS’ LED will then flash twice. > The number of additional remaining minutes will be indicated by the number of lit LEDs: each LED represents approximately 10 minutes.

NOTE: This product provides an estimate of remaining run-time. A more accurate and sophisticated run-time display is provided by the PAG Power & Time Display, incorporated in the L95 Time Battery. Overall Dimensions: Height PAGlok 130mm (5.1") V-Mount 130mm (5.1") *excluding PAGlok claws Weight: PAGlok V-Mount

731g 749g

(1.61lb) (1.65lb)

SPECIFICATIONS www.paguk.com

Width 86mm (3.4") 86mm (3.4")

Depth 42mm (1.65")* 47mm (1.85")

Protection: The battery incorporates the following safety shutdown systems: > 3 over-current shutdown systems. > 2 over-voltage shutdown systems. > 2 under-voltage shutdown systems. > 2 thermal shutdown systems (including a non-resetting thermal fuse). All electronic protection circuits within the battery are designed to withstand the leakage of electrolyte. Variable Charge Voltage: The battery can be manually set to control the charge voltage to either 4.1V or 4.2V per cell. This allows the user to make a choice between extended battery cycle life or high capacity. (NOTE: This feature is not available with V-Mount compatible Model 9360). Operating Temperature Range: Optimum discharge efficiency is achieved within the temperature range +10°C to +40°C. Power & Time Display: The PAG L95 Time Battery incorporates state-of-the-art low-power microelectronic circuits, giving the user access to the battery state of charge and run-time information. The battery is able to display an accurate run-time prediction, against any given load, expressed in hours and minutes on the built-in Power & Time Display. It can also display capacity in ampere-hours in 0.1Ah increments, and percentage of remaining available capacity in 1% increments. Overall Dimensions: Height PAGlok 130mm (5.1") V-Mount 130mm (5.1") Snap-on 130mm (5.1") *excluding PAGlok claws Weight: PAGlok V-Mount Snap-on

745g 745g 760g

(1.64lb) (1.64lb) (1.67lb)

Width 86mm (3.4") 86mm (3.4") 86mm (3.4")

Depth 42mm (1.65")* 47mm (1.85") 52mm (2.00")

Specifications. PAG L110 Time Battery

PAG ZL-Series Batteries

Model No. 9302 PAGlok professional battery connector.

Model No. 9302A PAG Snap-on compatible battery connector.

Model 9316 9316V 9317 9317V 9315 9315V 9314

Construction: The casing for these models consists of high-impact poly-carbonate injection mouldings, featuring an internal cradle designed to protect the cells from impact damage. The cells have welded interconnections of low-resistance nickel strap. The batteries are sealed and non userserviceable.

Construction: These batteries have welded cell interconnections of low-resistance nickel strap. The cases for these models consists of high-impact injection mouldings with an internal cradle feature designed to protect the cells from impact damage. The batteries are sealed and non userserviceable.

Cells: Premium grade Lithium-Ion sealed rechargeable cylindrical cells.

Cells: Premium grade Nickel-Metal Hydride sealed rechargeable cylindrical cells.

Model No. 9302V Sony V-Mount compatible battery connector.

Voltage: 14.8V nominal. The battery contains 12 cells connected in series/ parallel. Each cell has a nominal voltage of 3.7V. Capacity: Nominal 7.5 ampere-hours. Output Current: Rated maximum continuous output current is 7.0 amperes. Operating Temperature Range: Optimum discharge efficiency is achieved within the temperature range +10°C to +40°C. Battery Protection: The battery incorporates the following safety shutdown systems: > 3 over-current shutdown systems. > 2 over-voltage shutdown systems. > 2 under-voltage shutdown systems. > 2 thermal shutdown systems (including non-resetting thermal fuse). All electronic protection circuits within the battery are designed to withstand the leakage of electrolyte. Power & Time Display: PAG L110 Time Batteries incorporate state-of-the-art low-power microelectronic circuits, giving the user access to the battery state of charge and run-time information. The battery is able to display an accurate runtime prediction, against any given load, expressed in hours and minutes on the built-in Power & Time Display. It can also display capacity in ampere-hours in 0.1Ah increments, and percentage of remaining available capacity in 1% increments. Overall Dimensions: Height PAGlok 130mm (5.1") V-Mount 130mm (5.1") Snap-on 130mm (5.1") *excluding PAGlok claws Weight: PAGlok V-Mount Snap-on

745g 745g 760g

Width 86mm (3.4") 86mm (3.4") 86mm (3.4")

Depth 42mm (1.65")* 47mm (1.85") 52mm (2.00")

(1.64lbs) (1.64lbs) (1.67lbs)

NOTE: PAG L110 batteries are currently only available to UK customers.

Battery PAG ZL-150 PAG ZL-150 PAG ZL-125 PAG ZL-125 PAG ZL-50 PAG ZL-50 PAG ZL-NP

Connector PAGlok V-Mount compatible PAGlok V-Mount compatible PAGlok V-Mount compatible NP1 format

Voltage: ZL-150, & ZL-50: 14.4V nominal (12 cells connected in series, nominal voltage 1.2V per cell). ZL-125: 13.2V nominal (11 cells connected in series, nominal voltage 1.2V per cell ). ZL-NP: 13.2V nominal (11 cells connected in series, nominal voltage 1.2V per cell ). Capacity: ZL-150 10 Ampere-hours nominal. ZL-125 125 Watt-hours nominal. ZL-50 3.2 Ampere-hours nominal. ZL-NP 3.0 Ampere-hours nominal. Output Protection: ZL-Series batteries are protected against short circuit and excessive currents by means of a self-resetting protection device. Rated Maximum Continuous Output Current: ZL-150, ZL-125 & ZL-NP: 8 Amperes ZL-50: 7 Amperes Over-Temperature Protection: ZL-150 and ZL-125 batteries are protected by means of a self-resetting thermal trip rated 71°C. ZL-50 and ZL-NP batteries are protected by means of a non-resetting thermal fuse rated 98°C. Operating Temperature Range: Optimum discharge efficiency is achieved within the temperature range 10°C to +40°C. Power & Time Display: The ZL-125 battery incorporates state-of-the-art low-power microelectronic circuits, giving the user access to the battery state of charge and run-time information. The battery is able to display an accurate run-time prediction, against any given load, expressed in hours and minutes on the built-in Power & Time Display. It can also display capacity in ampere-hours in 0.1Ah increments, and percentage of remaining available capacity in 1% increments. State of Charge Indication: ZL-50 and ZL-NP batteries incorporate an LED-array charge indicator. Overall Dimensions and Weights: Model Battery 9316 ZL-150 9316V ZL-150 9317 ZL-125 9317V ZL-125 9315 ZL-50 9315V ZL-50 9314 ZL-NP * excluding PAGlok claws

Dimensions (H x W x D) 208 x 125 x 44mm* 208 x 125 x 52mm 208 x 125 x 44mm* 208 x 125 x 52mm 130 x 86 x 42mm* 130 x 86 x 47mm 182 x 71 x 25mm

Weight 2.35kg 2.35kg 2.20kg 2.20kg 0.88kg 0.88kg 0.73kg

SPECIFICATIONS www.paguk.com

Specifications. PAG Cube Charger

PAG AR124PLD Charger

Model 9702V

Model 9792

Battery Connections: 4 x V-Mount compatible connectors.

Battery Connections: > Four PAGlok professional battery connectors. > Four PP90 (2.1mm) connectors.

Range of Batteries Charged: > PAG V-Mount Li-Ion: L95e (9310V), L95 (9360, 9335V) L110 (9302V). > PAG V-Mount ZL-Series: ZL-150 (9316V) and ZL-50 (9315V). > Sony V-Mount Li-Ion and Ni-MH. > IDX V-Mount Li-Ion. Main Charge Programs: > Li-Ion Intelligent Parallel Charging program: maximum output 6A at 16.8V (100W approx.). > PAG ACS Ni-MH sequential charge program: output 3A. Recovery Feature: Automatically recovers a Li-Ion battery where the output has been shut down. Additionally, the program detects batteries having a very low voltage, and initiates a special low charge current. The program will operate until the voltage has risen sufficiently for batteries to safely accept the normal charge current. Self Test Program: The internal microcomputer constantly monitors the battery under charge, as well as the operation of the charger’s own functions, which will be shut down to a safe condition should any of the tests fail. Mains Input: 90V to 265VAC. Frequency 50-60 Hz. EN6100-3-2 Power factor corrected. Maximum consumption 140W. Output Protection: Charger protected against short circuit and excess battery voltage. AC Mains Failure Protection: Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition. User Interface: Comprehensive LCD indication of charging process. The charger is fully automatic in operation and no user controls are provided. Safety: Designed to comply with electrical safety standard BS EN 60065 and UL6500. NOTE: U.K. mains leads are fitted with a 1" fuse to BS1362 rated 5A as standard. European Union Directives: Complies with the following: > EMC Directive 89/336/EU. > Low Voltage Directive 73/23/EU. Operating Temperature Range: 0°C to +40°C (+32°F to +104°F). Overall Dimensions (H x W x D): 157 x 157 x 157mm (6.2 x 6.2 x 6.2") Weight: 1.19kg Typical Charging Times: 1 PAG L95 3hrs 15mins 2 PAG L95s 4hrs 3 PAG L95s 5hrs 4 PAG L95s 6hrs 30mins

These times are approximate only, and assume batteries are fully discharged. Charging times will be less if batteries are already partially charged.

Range of Batteries Charged: > PAGlok Lithium-Ion batteries. > PAG V-Mount Lithium-Ion batteries (via Charge Adaptor Model 9617). > Nickel-Metal Hydride batteries: 4.8V to 14.4V, 1Ah to 10Ah. > Nickel-Cadmium batteries: 4.8V to14.4V, 1Ah to 10Ah. Main Charge Program: > Auto Mode: automatically selects the correct charge current. > Manual selection: 2A, 3A or 4A charge current. > Li-Ion voltage-charge program: only available with PAG intelligent Li-Ion batteries, which control the charge regime. Discharge-then-Charge Program: Discharges the battery, automatically determining the fully-discharged condition, and then fully charges it. The discharge capacity and the subsequent charge loaded can be displayed on the screen. Recovery Charge: Conditions the battery for one hour, then automatically enters the Main Charge program, which runs until the battery is fully charged. This program also recovers PAG Li-Ion batteries where the internal safety protection circuit has tripped. Ancillary Charging Programs: The following programs may be automatically entered after charging: > Balancing Charge. > Self-adjusting Maintenance Charge (not applied to Li-Ion batteries). Self Test Program: The internal microcomputer constantly monitors the battery under charge or process as well as the operation of the charger’s own functions which will be shut down to a safe condition should any of the tests fail. Mains Input: 90-139V or 140-270V ~ autoselected. Frequency 47-63 Hz. Maximum power consumption 120W. Output Protection: Charger protected against short circuit, open circuit, excess battery voltage and reverse battery voltage. AC Mains Failure Protection: Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition. Safety: Designed to comply with electrical safety standard BS EN 60065. NOTE: UK plugs are fitted with a 1" fuse to BS1362 rated 5A as standard. European Union Directives: Complies with the following EU Directives: > EMC Directive 89/336/EU. > Low Voltage Directive 73/23/EU. Operating Temperature Range: 0ºC to +40ºC (+32ºF to +104ºF). Overall Dimensions (W x H x D): 168 x 82 x 240mm (6.6" x 3.2" x 9.5" approx.). Weight: 1.23kg (2.70lbs approx.).

For other product specifications visit the PAG website at www.paguk.com

SPECIFICATIONS www.paguk.com

PAG. Warranty.

PAG products have earned a reputation throughout the world for excellence in quality, reliability and performance. The PAG Warranty reinforces this reputation by guaranteeing each product for a period of 18 months, unless otherwise stated. PAG L95 and L110 Batteries (but not L95e), PAG Chargers and 12V Paglights carry a 2 year warranty.

Refer to the product Instruction Manual for full warranty terms and conditions.

A full after-sales support service is provided by PAG throughout a product’s lifetime, which includes servicing, repairs and technical advice. PAG maintains a worldwide network of Authorised Service Centres. These facilities have a wealth of specialist knowledge, which is the result of PAG’s 40 years of experience. Using PAG’s Authorised Service Centres is the only way to ensure the continuation of the quality standard for which you first chose PAG products. For servicing outside of the UK contact your nearest PAG Agent via the PAG website at www.paguk.com For servicing in the UK contact the PAG Service Department: Email: service@paguk.com Mail: PAG Ltd. 565 Kingston Road, Raynes Park, Telephone: +44 (0) 20 8543 3131 London SW20 8SA, UK.

PAG Ltd. hereby declares that PAG L95 and L95e Lithium-Ion batteries contain concentrated lithium equivalence in a quantity not exceeding 8 grams. This quantity is in compliance with Section A45-2* of the Hazardous Substances Standards of the International Civil Aviation Organisation (ICAO). PAG L95 Lithium-Ion batteries have been independently tested by ETL SEMKO UK and are certified to comply with UN specification ST/SG/AC.10/11/Rev 4 (Test Report Number 05018716). PAG L95 and L95e Lithium-Ion batteries are therefore not subject to the IATA Dangerous Goods Regulations and are suitable for air transport as non-hazardous articles.

The following are trademarks of PAG Ltd: ‘PAG Professional Broadcast Equipment’, ‘Time Battery’ ‘Power & Time Display’ ‘SuperPack’ ‘Pagbelt’ ‘PAG ACS’ ‘AR Series 2’ ‘PAG Pulsar’ ‘PAG Quasar’ ‘PAG Cube’ ‘PAG iPC’ ‘PAG Freelancer’ ‘PAG Power Plate’ ‘PAGlok Connector’ ‘Paglight’ ‘Softstart’ ‘PowerArc’ ‘PowerMax’ All third party trademarks are acknowledged as such.

PAG Ltd. retains the right to change the specifications contained herein without notice

WARRANTY www.paguk.com

> PAG DV Solutions

> PAG has been manufacturing professional products designed specifically for the hand-held camcorder market for more than seven years. > To see the full range of products and buy on-line visit www.paguk.com/C6_Orbitor > The Paglight C6 lighting kit is incredible value for money. It includes a professional 6V camera light, a 6V 8Ah Ni-MH battery and a charger. The light posesses many of the features of the 12V Paglight. > PAG has also designed shoulder mounted camcorder supports, the Orbitor and the X1A, to provide stablility and reduce fatigue when shooting with hand-held camcorders.

Your Partner in Power

Professional Broadcast Equipment

PAG Ltd. 565 Kingston Road Raynes Park London SW20 8SA United Kingdom

E sales@paguk.com T +44 (0)20 8543 3131 F +44 (0)20 8540 4116 www.paguk.com www.pagstore.com

PAG is a UK distributor for Angenieux, Cartoni, Chrosziel, Tiffen and Transvideo.

ÂŠ 2009 PAG Ltd.