Kydex

History Introduced by Rohm and Haas Company in 1965 for aircraft interior applications, the KYDEX® product line was purchased by Kleerdex Company in 1987 and developed in additional grades to satisfy other demanding applications. Today, proprietary KYDEX® thermoplastic sheet is produced in Bloomsburg, PA, USA, at Kleerdex Company’s ISO 9002: 2000 and ISO 14001 certified manufacturing facility. The products are marketed worldwide by an extensive network of Kleerdex customer service personnel and factory-trained sales representatives who provide customers with technical advice on designing and manufacturing components that benefit from the special properties of KYDEX® sheet.

Environmental Policy For Kleerdex Company, environmental responsibility has been an essential part of its business philosophy for more than 20 years. Every KYDEX® thermoplastic sheet product is produced and sold in keeping with the company’s commitment to and regard for safety, health, and environmental protection. Kleerdex’s ISO 14001 certified manufacturing operations and R&D facilities ensure regulatory compliance while helping to protect resources, minimize waste, and reduce environmental impacts. In addition, KYDEX® thermoplastic sheet is 100% recyclable—making it an environmentally sound alternative to other products.

KYDEX, LLC ISO 9001and ISO 14001 Certified 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 www.kydex.com

Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability or the accuracy of this information or the suitability of our products in any given situation. Users of our products should make their own tests to determine the suitability of each product for their particular purposes. THE PRODUCTS DISCUSSED ARE SOLD WITHOUT WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, EITHER EXPRESSED OR IMPLIED, EXCEPT AS PROVIDED IN OUR STANDARD TERMS AND CONDITIONS OF SALE, and buyer assumes all responsibility for loss or damage arising from thehandling and use of our products, whether done in accordance with directions or not. In no event shall the supplier or the manufacturer be liable for incidental or consequential damages. Also, statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent.

Selection Guide Thermoplastic sheet in specialised grades for demanding applications

Protect the long-term performance and appearance of your products with KYDEX® thermoplastic sheet.

Description KYDEX® sheet is an extremely durable thermoplastic alloy extruded to withstand levels of abuse from moderate to extreme.

It is available in grades designed to optimise long-term performance, appearance, and cost effectiveness across demanding and diverse end-use applications.

• 37 standard, 3,500+ custom colours • Thicknesses: 0.56mm–12.70mm (0.022"–0.500") • Eight textures • Granite patterns, woodgrains, metallics KYDEX® Sheet Properties • Impact Resistance • Dimensional Stability • Weatherability • Flame Retardancy • Chemical Resistance • Cleanability Design Flexibility KYDEX® sheet offers unprecedented design and manufacturing flexibility, with a choice of grades available to provide properties and certified ratings required to fit a broad range of applications. An unlimited variety of flat and three-dimensional effects can be achieved through techniques including thermoforming, membrane pressing, post forming, brake forming, laminating, machining, and miter folding. This allows different parts to be produced using the most efficient technique yet still match in appearance.

Other Applications The diverse mechanical and electrical properties, fire ratings, textures, thicknesses, colours, and patterns available with KYDEX® sheet make it suitable for a limitless range of demanding applications, from gun holsters and channel buoys to hospital beds and ice hockey targets.

Thermoforming For fast setup and production in quantities from 500 to several thousand parts, thermoforming is commonly selected over injection molding—for tooling costs up to 90 percent lower and parts completed up to two or three times faster. KYDEX® sheet is well established as a premier thermoforming sheet, offering processing advantages.

Mass Transit Vehicle, RV, and Marine Interior Components KYDEX® sheet is available in specialised grades that meet all performance criteria for flammability and smoke emission according to standards documented by regulatory authorities.

Production Methods

• Extreme formability

Laminating and Miter Folding Lamination with KYDEX® sheet results in a protective, attractive surface that does not chip, crack, break, or snap like high-pressure laminates, to withstand abuse in high-traffic retail, institutional, and commercial interiors.

• Superior hot tear strength

Medical Products and Clean Rooms From equipment housings to building products to sanitary, fire-rated ceiling panels, specialised grades of KYDEX® sheet offer the durability, cleanability, and versatility required by the most demanding medical applications.

• Integral colour (depending on grade) to eliminate dark edges

Membrane Pressing With membrane pressing, an inflated bladder (or membrane) is used to physically press heated plastic sheet onto a wood or composite substrate (or core), eliminating the need for molds. The outstanding formability of KYDEX® sheet is ideally suited to membrane pressing.

Applications Aviation A range of high-performance, aircraft-specific grades of KYDEX® sheet satisfy FAA fire retardancy requirements and exhibit outstanding physical, mechanical, and thermal properties for aircraft interior components.

Equipment Housings Outstanding physical properties, fire ratings, formability, and a wide selection of specialised grades make KYDEX® sheet a premier material for high-performance equipment housings.

Commercial, Building and Industrial Materials KYDEX® sheet can be used to produce a wide range of components including displays, signage, wall coverings and food processing guards. Meeting Class 1/A and NSF requirements, KYDEX® sheet withstands high traffic, resists harsh chemicals and overcomes the drawbacks of conventional surfacing methods, making it ideal for use in a variety of commercial and industrial applications.

• Available in a range of thicknesses • A wide choice of substrates, such as wood, metal, gypsum, and rigid foam • Use of commercially available adhesives and hot- or cold-pressing production methods • Ability to miter fold to produce seamless outside corners Forming, Fabricating, and Machining The diversity of methods to effectively form, fabricate, machine, and join KYDEX® sheet— without the cracking, chipping, or snapping associated with many thermoplastic and thermoset sheet products—opens limitless application possibilities.

• Machining with conventional power tools (saw, die cut, shear, rout, drill, sand, file, mill) • Post forming, brake forming, and heat welding • Joining with screws, rivets, other common fasteners, or commercially available adhesives • Appropriate for formed and/or laminated products requiring simple or complex secondary operations

• Ability to maintain uniform wall thickness • A choice of forming methods to produce sharp edges, undercuts, and other close tolerance details

• Conforming fully to the core • Ability to create three-dimensional contours and seamless edges with compound curves • Preservation of sharp edges and surface detail • Maintenance of uniform wall thickness on high spots, low spots, and sharp corners • Ability to laminate and heat-weld bottom edges for total encapsulation

Standard Grades Overview Application Medical

Equipment Housings

Commercial/Building/Industrial Materials

■

■

■

■

■

■

■

■

■

X-VO

X-VO

■

■

■

■

■

■ ■

■

■

■

■

■

■

■ ■

■

■

■ ■

■

■

■

■

■

■

■

■

■

TEST

X-2000

■

■

■

■ ■

■

■

■

■

■

■

■

■

■

■

■

■

■ ■ ■

■

■

■

TEST

■

■

■

■

■

■

■

■

■

X-2003

■

■

■

■

■

■

■

■

TEST TEST

■

■ ■

■

■

■ ■

■

■

■

■

■

* Impact Resistance - Gardner Drop Dart (25.40 mm [1.0”] MDF)

TEST

■

X-2000

Impact Resistance at 73º F, (ft-lbs/in) [ASTM-D256]

BS 476 Part 6

BS 476 Part 7

DIN 4102

ASTM E-84

NFP 92-501

NSF Std 51-Food

UL 746C

UL 94

UL Std 94 V-O

SMP 800C

Docket 90A

EC 95/28/EG

ASTM E-662

ASTM E-162

DIN 5510 (-2 S4, ST2, SR1 or 2) X-2003

961 J/m (18 ft-lbs/in) 961 J/m (18 ft-lbs/in) 212 J/m (4 ft-lbs/in) 128 J/m (2.4 ft-lbs/in) 160-267 J/m (3-5 ft-lbs/in) 187 J/m (3.5 ft-lbs/in) 961 J/m (18 ft-lbs/in) 961 J/m (18 ft-lbs/in) 801 J/m (15 ft-lbs/in) 107-214 J/m (2-4 ft-lbs/in) 801 J/m (15 ft-lbs/in) 801 J/m (15 ft-lbs/in) 374-480 J/m (7-9 ft-lbs/in) 53-160 J/m (1-3 ft-lbs/in) 53-160 J/m (1-3 ft-lbs/in) 53 J/m (1 ft-lbs/in) 53 J/m (1 ft-lbs/in) 267 J/m (5 ft-lbs/in) 187 J/m (3.5 ft-lbs/in) 107 J/m (2 ft-lbs/in) 107 J/m (2 ft-lbs/in) 33.9 N-m* 300 in-lbf* 801 J/m (15 ft-lbs/in) 801 J/m (15 ft-lbs/in) 801 J/m (15 ft-lbs/in) 35.06 N-m* 310 in-lbf* 48.58 N-m* 430 in-lbf* 48.58 N-m* 430 in-lbf*

Tensile Strength psi (x103) [ASTM D-638]

■

Properties Modulus of Elasticity psi (x103) [ASTM D-790]

■

FMVSS 302

D6-51377

BSS 7239

ABD-0031

FAR 25.853(d)

FAR 25.853(a)

Certification

2310 MPa 335,000 psi 2310 MPa 335,000 psi 2758 MPa 400,000 psi 2450 MPa 356,000 psi 2391 MPa 347,000 psi 2372 MPa 344,000 psi 2310 MPa 335,000 psi 2310 MPa 335,000 psi 2480 MPa 360,000 psi 2551 MPa 370,000 psi 2480 MPa 360,000 psi 2344 MPa 340,000 psi 2517 MPa 365,000 psi 2896 MPa 420,000 psi 3833 MPa 556,000 psi 3833 MPa 556,000 psi 3833 MPa 556,000 psi 2241 MPa 325,000 psi 2413 MPa 350,000 psi 2710 MPa 393,000 psi 2710 MPa 393,000 psi 3367 MPa 489,000 psi 2480 MPa 360,000 psi 2480 MPa 360,000 psi 2480 MPa 360,000 psi 3367 MPa 489,000 psi 2480 MPa 360,000 psi 2480 MPa 360,000 psi 2320 MPa 360,000 psi

42 MPa 6100 psi 42 MPa 6100 psi 48 MPa 6900 psi 45 MPa 6500 psi 40 MPa 5750 psi 41 MPa 6000 psi 42 MPa 6100 psi 42 MPa 6100 psi 42 MPa 6100 psi 40 MPa 5800 psi 42 Mpa 6100 psi 42 MPa 6100 psi 43 MPa 6200 psi 45 MPa 6500 psi 43 MPa 6180 psi 43 MPa 6200 psi 43 MPa 6200 psi 44 MPa 6400 psi 41 MPa 6000 psi 23 MPa 3390 psi 23 MPa 3390 psi 50 MPa 7200 psi 42 MPa 6100 psi 42 MPa 6100 psi 42 MPa 6100 psi 50 MPa 7200 psi 42 MPa 6100 psi 42 MPa 6100 psi 74 MPa 10400 psi

94 88 108 94 107 101 94 94 * 97 94 93 108 98 111 111 111 104 98 78 78 114 94 94 * 114 94 94 125

Heat Deflection Temp @264 psi (annealed) ºF [ASTM D-648]

Mass Transit

Rockwell Hardness (R scale) [ASTM D-785]

Aviation

78.3º C (173º F) 78.3º C (173º F) 78.3º C (173º F) 73.9º C (165º F) 81.1º C (178º F) 76.7º C (170º F) 78.3º C (173º F) 78.3º C (173º F) 75.6º C (168º F) 71.1º C (160º F) 75.6º C (168º F) 79.4º C (175º F) 78.3º C (173º F) 78.3º C (173º F) 75.9º C (168.6º F) 75.9º C (169º F) 75.9º C (169º F) 90.6º C (195º F) 77.8º C (172º F) 74.4º C (166º F) 74.4º C (166º F) 75.1º C (167º F) 75.6º C (168º F) 75.6º C (168º F) 75.6º C (168º F) 75.1º C (167º F) 75.6º C (168º F) 75.6º C (168º F) 120.5º C (249º F)

Grade KYDEX® 100 KYDEX® 101 KYDEX® 107 KYDEX® 110 KYDEX® 115 KYDEX® 130 KYDEX® 150 KYDEX® 150 MB KYDEX® 152 WG KYDEX® 160 KYDEX® 510 KYDEX® 550 KYDEX® 1900 KYDEX® 5555 KYDEX® 5555 MB KYDEX® 6185 KYDEX® 6200 KYDEX® 6200 LTA KYDEX® 6200 LTR KYDEX® 6565 KYDEX® 6565(d) KYDEX® HD KYDEX® T KYDEX® T-MB KYDEX® T MC KYDEX® WG KYDEX® XD KYDEX® XD MB KYDEX® FST

KYDEX® Colours

Thicknesses

Patterns

KYDEX® sheet is currently available in over 3500 colours, granite, metallic and woodgrain patterns, nine surface textures and thicknesses from .56 mm to 12 mm. If none of these meets your needs, we’ll make a custom colour just for you.

Custom thicknesses also available

KYDEX® 130 Granites

0.56mm (0.022”) 0.71mm (0.028”) 1.02mm (0.040”) 1.52mm (0.060”)

Rosestone 82101

Black 82503

Glass Green 82303

Navy Blue 82401

Desert Sand 82703

KYDEX® 510 Granites Shown with black/white cap; rust/gray or clear cap also available

2.03mm (0.080”) 2.36mm (0.093”)

Pastel Blue 42031

Black 42114

Sandy Beach 72179

Beige Nebula 72646

Pewter Gray 52001

Steel Gray 52068

Pinstripe 52070

3.18mm (0.125”) 3.96mm (0.156”) 4.75mm (0.187”)

KYDEX® 110 Metalic Colours

6.35mm (0.250”) 7.92mm (0.312”)

Copper 82103

Strawberry Pop 82108

Ductile Gold 82202

Lemon Star 82206

Shimmering Forest 82305

Olympic Cast 82406

Royal Garb 82407

Silver 82507

Pearl 82606

Bronze 82704

8.25mm (0.325”)

9.52mm (0.375”)

KYDEX® Sheet Woodgrains and 152 Woodgrains Shown 50% of actual size

10.80mm (0.425”) Chip chains containing samples of KYDEX® standard colours, metallics, granites, surface textures and sheet thicknesses are available through the KYDEX® sheet Customer Service Department.

Pearlwood

Rustic Cherry

Riga Birch

Candlelight

Tundra Birch

Chocolate Pear

Summerflame

Red Alder

Honey Maple

Fusion X

Ellmau Beach

Manitoba Maple

12.70mm (0.500”)

Patterns are representative only, and selection should not be based solely on the above chart.

Surface Textures Shown actual size

P-A Smooth

P-C Level Haircell

P-3 Velour Matte

P-8 Suede

P-E Smooth Nap

NOTE: Texture can influence the appearance of any colour.

P-H Seville

P-K Cashmer

P-1 Haircell

Corporate Identity and

Brand Standards Manual

Welcome

Welcome to the KYDEX, LLC Corporate Identity and Brand Standards Manual It’s not just a logo. It’s an identity. A brand represents all of

This manual contains guidelines and examples for

the images, emotions, beliefs and expectations we associate

upholding the brand throughout all aspects of KYDEX’s

with not only products, but also with the service, people and

corporate and marketing communications.

outcome related to each experience.

These standards are designed to:

Our well-respected brand is our most valuable asset. It

– establish, explain and illustrate standards for creating and

embodies all that we stand for, conveys the beliefs and principles upon which we operate and serves as our introduction in any forum. By championing the KYDEX name and speaking with a unified voice, this perception becomes more widely known and strongly linked with the product benefits, enabling us to: – increase sales opportunities and market share;

maintaining the integrity of company communications and the brand components they carry; – convey, through these standards, a coherent, consistent, and appropriate image of the company; – ensure the appropriate layout, design and creation of KYDEX’s communications and promotions; – encourage designers, developers, product managers and

– encourage creative use of our product;

marketing managers to refer to this manual regarding

– attract and retain customers.

KYDEX’s brand standards.

This branding initiative signifies a comprehensive effort to

All communications and promotions — printed, web-based, or

define and differentiate KYDEX as a brand which stands for a

otherwise — should support and reinforce the purity, simplicity,

promise of performance and delivery. By articulating the

consistency and impact of the company’s identity and image.

KYDEX brand and reinforcing our message, we build trust through an accurate description of who we are and how our discernible differences help to attract and retain customers and build brand loyalty.

KYDEX, LLC

ı Welcome

Table of Contents

I.

Brand

II. Corporate ID

III. Collateral

Elevator Statement

1

Our Voice

1

Corporate Logo Lockup

2

Attributes

1

Product Logo Lockup

3

Logo

Specs and Grids

Combination Logo Lockup — Horizontal

4

— Vertical

5

Colour

6

Sizing

7

Special Usage

Product Information Sheets — All Pages

25

— Last Page

26

Market Guides — Horizontal Combination Logo Lockup 27 — Vertical Combination Logo Lockup Advertising

— Corporate Logo

8

— Product Logo

9

28 29

Sample Layouts

10

Market Guides

30

— Tinted Logos

10

Advertising

30

— Vertical Logo

10

— Wallpaper

Incorrect Usage

11

Microban Logo Usage

12

Co-brand Logo Lockup

13

®

Legal Legal Use — Written Form

14

Copyright, Trademark and Form Number

15

Disclaimer — General

16

— Product Information Sheets

17

Colour Palette Colour Palette

18

Colour Usage

19

Typography Print Fonts

20

Online Fonts

21

Stationery Business Cards

22

Letterhead and Envelopes

23

PowerPoint®

24

Table of Contents

ı KYDEX, LLC

I. Brand

Elevator Statement

Attributes

KYDEX, LLC is a worldwide leader in specialty thermoplastic

We are passionate about our business and how we deliver

sheet manufacturing. We make a high-quality, durable sheet

value for our customers and suppliers every day. We pledge

that customers mold to make products such as airline seats

to be professional, proactive, helpful and courteous. The

and tray tables, medical devices and store fixtures. Our

following brand attributes are intended to govern everything

technical expertise allows us to deliver product in over 3,500

we do as a company and set the tone for how we

colours, with short lead times and low minimum orders.

communicate with our constituents.

Our Voice . . . . . . reflects where we come from. It resonates with those qualities tied to our long heritage of being straightforward, hardworking, honest and customer-centric.

. . . must always be consistent and support what we are today: stable, strong, adaptable and responsive.

KYDEX, LLC is a reflection of the following: – Quality – Reliability – Dependability – Durability – Trust – Value – Flexibility – Innovation

. . . must also demonstrate what we strive to be:

– Product expertise

progressive, approachable, innovative, consistent

– Performance

and performance-driven.

– Consistency – Customer focused

. . . is also human, so there are moments when we are serious, and moments when we can smile a bit. We

– Partnership

comprise a range of emotions but should never speak

– State-of-the art technology

without emotion.

– Integrity and honesty

. . . does not change, whether communicated in a vision statement, in an advertisement, or in a one-on-one interaction with customers or between manufacturers’ representatives.

1

– Adaptability

KYDEX, LLC

ı Elevator | Our Voice | Attributes

II. Corporate ID

Corporate Logo Lockup The KYDEX, LLC Corporate logo was designed to leverage the ®

brand awareness associated with the KYDEX sheet logo, while

The logo should never be recreated or altered in any way.

Logos will be supplied upon request.

maintaining its own distinct look and feel.

The Corporate logo is to be used for all corporate documents including business cards, letterhead, envelopes, fax coversheets, and interoffice memos, as well as all web-based communications.

Top bar of “E” is PMS 554 Logo PMS Cool Gray 9 60% Black can be used depending upon the optimal number of PMS colours used for a specific job.

x

Clear space x = Height of letters in KYDEX on all sides

x

Do not place type or images within the x space surrounding the logo.

Rules can bisect the clear space

x

ISO information can be placed at 1/2 of x

x

x

Lockup with ISO and contact information

Standard size

80% Standard size Corporate logo 1

ISO 9001:2000 | ISO 14001:2004 Certified

1.191"

Minimum size

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 Fax: +1.570.387.8722 info@kydex.com www.kydex.com

/2 x ISO information: Formata Cond. 6 pt/9 pt + 2 pt space after Flush left with logo Contact information: Formata Light Cond. 8 pt/9 pt + 4 pt space after Flush left with logo Web address: Formata Medium Cond. 8 pt/9 pt Flush left with logo

.715" Corporate Logo Lockup

ı KYDEX, LLC

2

II. Corporate ID | Logo

Product Logo Lockup The KYDEX簧 thermoplastic sheet logo has worldwide brand

The Product logo is always locked-up with the tagline,

recognition and is therefore the primary logo to be used for

Durability by Design, and should never be recreated or

promotional items, advertisements, and co-branded materials.

altered in any way. Logos will be supplied upon request.

Product Name PMS 554 Always carries a registration mark Separation Rule 100% Black Identifier 100% Black

Tagline PMS 554 Always carries a registration mark

y

Clear space

y

y = Height of letters in KYDEX on all sides Do not place type or images within the y space surrounding the logo.

Rules can bisect the clear space

y y

y

Standard size

Minimum size

.808" 1.101"

3

KYDEX, LLC

覺 Product Logo Lockup

Logo | II. Corporate ID

Combination Logo Lockup — Horizontal The Combination logo is to be used on all communications

See pages 15–16 for copyright and disclaimer information.

that represent both the corporation and the product, specifically customer-facing materials with a long shelf life.

Examples of materials to be used with the Combination logo include Market Guides and product brochures.

ISO information: Formata Cond.

6 pt/9 pt + 2 pt space after Flush left

Contact information: Formata Light Cond.

8 pt/9 pt + 4 pt space after Flush left

Web address: Formata Medium Cond.

8 pt/9 pt Flush left

y Align top of both logos Standard size Product logo

80% Standard size Corporate logo

x

y

1

ISO 9001:2000 | ISO 14001:2004 Certified

/2 x

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 Fax: +1.570.387.8277 info@kydex.com www.kydex.com .25"

bottom margin Specs and Grids:

Center rule within the gutter between the two right columns of the Market Guide Grid (see page 27)

Clear space between logos = y 1 pt vertical rule 30% Black centered between logos Flush with the top of the logos and flush with the baseline of the web address

Combination Logo Lockup — Horizontal

ı KYDEX, LLC

4

II. Corporate ID | Logo

Combination Logo Lockup — Vertical The Combination logo is to be used on all communications

See pages 15–16 for copyright and disclaimer information.

that represent both the corporation and the product, specifically customer-facing materials with a long shelf life.

Examples of materials to be used with the Combination logo include Market Guides and product brochures.

ISO information: Formata Cond.

6 pt/9 pt + 2 pt space after Flush left

Contact information: Formata Light Cond.

8 pt/9 pt + 4 pt space after Flush left

Web address: Formata Medium Cond.

8 pt/9 pt Flush left

y

Standard size Product logo

Clear space between logos = y 1 pt horizontal rule 30% Black centered between logos Flush with the left of the Combination logo lockup and align right with the longest line of Dual-brand lockup

y 80% Standard size Corporate logo

x 1

ISO 9001:2000 | ISO 14001:2004 Certified

/2 x

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 Fax: +1.570.387.8277 info@kydex.com www.kydex.com bottom margin

.25"

Specs and Grids: Place within the last column on right, flush with gutter of the Market Guide Grid (see page 28)

5

KYDEX, LLC

ı Combination Logo Lockup — Vertical

Logo | II. Corporate ID

Colour The two-colour version is always preferable except in

Both logos are available in two-colour and one-colour formats as

instances where external limitations prevent the use of more

well as a reversed-out white version.

than one colour.

Corporate logo 4 Colour (CMYK) 2 Colour PMS

Reversed-out White

Pantone

CMYK

554 Cool Gray 9 or 60% Black

C: 78 C: 0 C: 0

Black Top bar of “E” prints 100% Black Logo prints 60% Black

RGB M: 0 Y: 63 K: 67 M: 1 Y: 0 K: 51 M: 0 Y: 0 K: 60

R: 31 R: 116 R: 128

HEX Number G: 91 G: 118 G: 130

B: 66 B: 121 B: 133

1f5b42 747679 808285

Product logo 4 Colour (CMYK) 2 Colour PMS

Reversed-out White

Pantone

CMYK

554 Black

C: 78 C: 0

Black

RGB M: 0 Y: 63 K: 67 M: 0 Y: 0 K: 100

R: 31 R: 0

HEX Number G: 91 G: 0

B: 66 B: 0

1f5b42 000000

Colour

ı KYDEX, LLC

6

II. Corporate ID | Logo

Sizing Resizing should be done proportionally to the original

To resize the logo start at 100% and enlarge or reduce logo

dimensions of the logo mark and include all elements

accordingly (no smaller than the minimum size indicated for

(Corporate logo: company name, top bar of “E” and LLC —

logo type). Hold the shift key as you drag from the corner point

Product logo: product name, rule, identifier, registration marks

to ensure proper scaling. Do not distort or stretch the logos.

“®” and tagline).

Document size

Minimum size

Less than 3" wide

3" to 11" wide*

More than 11" wide

Percent logo size for Corporate logo

60% Standard size logo

Scale down Standard size logo

80% and Standard size logo (100%)

Scale up Standard size logo

Percent logo size for Product logo

75% Standard size logo

Scale down Standard size logo

Standard size logo (100%)

Scale up Standard size logo

* Based on use in Combination logos.

7

Examples:

Examples:

Examples:

Logo at minimum size

Scale standard size logo (100%) down proportionally, no smaller than minimum size

Scale standard size logo (100%) up proportionally

KYDEX, LLC

ı Sizing

Logo | II. Corporate ID

Special Usage — Corporate Logo Bevel/Emboss The embossed logo is to be used as a graphic element in presentation materials only and represents the forming process. Presentation materials may include PowerPoint

– Structure specs change depending on logo size. The larger the logo the larger the bevel/emboss size — this applies to all tones: light, medium and dark

templates, pocket folders, sales kits, and CDs.

– apply same Contour specs to all types (see page 9)

To create bevel/emboss effect on KYDEX® sheets:

Emboss can be used for the following patterns:

– use Corporate Logo at 130% Standard size or larger

– KYDEX® 130 Granites

(sizes can be applied to all tones)

– KYDEX® 110 Metallic Colours

– open .eps logo into the Photoshop sheet sample to be used

– KYDEX® WG and KYDEX® 152 WG

– apply Darken blending mode to logo layer

Emboss can be used on the following surface textures:

– use INNER Bevel, Direction DOWN only – apply Bevel and Emboss layer style settings depending on sheet tone: light, medium or dark (see below) – Shading specs change in the Highlight and Shadow Mode

– P-A Smooth – P-8 Suede Photoshop document with samples is available.

(see below)

Light tone

Medium tone

Dark tone

130%

175%

225%

Increase bevel by 2 px when logo is larger in increments of 45-50% (275% = 10px) Special Usage — Corporate Logo

ı KYDEX, LLC

8

II. Corporate ID | Logo

Special Usage — Product Logo Bevel/Emboss The embossed logo is to be used as a graphic element in presentation materials only and represents the forming

– Shading specs change in the Highlight and Shadow Mode (see below)

process. Presentation materials may include PowerPoint

– apply same Contour specs to all types

templates, pocket folders, sales kits, and CDs.

Emboss can be used for the following patterns:

®

To create bevel/emboss effect on KYDEX sheets:

– KYDEX® 130 Granites

– use Product logo 130% Standard size or larger (sizes can

– KYDEX® 110 Metallic Colours – KYDEX® WG and KYDEX® 152 WG

be applied to all tones) – open .eps logo into the Photoshop sheet sample to be used – apply Darken bending mode to logo layer – use OUTER Bevel, Direction UP only – apply Bevel and Emboss layer style settings depending on sheet tone: light, medium or dark (see below)

Emboss can be used on the following surface textures: – P-A Smooth – P-8 Suede Photoshop document with samples is available.

– Structure specs are the same for all types

Light tone

Medium tone

Dark tone

Contour Applies to all tones, sizes and logos

9

KYDEX, LLC

ı Special Usage — Product Logo

Logo | II. Corporate ID

Special Usage — Wallpaper | Tinted Logos | Vertical Logo Wallpaper

Tinted logos

Product logo is the only logo used (do not use

The Corporate logo and Product logo can appear

Corporate logo):

as a tint or 100% PMS 554 when used:

– for packaging only

– for packaging

– on a 22º angle

– for one-colour (PMS 554) communications

100% PMS 554 logo 70% PMS 554 background

70% PMS 554 logo 100% PMS 554 background

100% PMS 554 logo 30% PMS 554 background

30% PMS 554 logo 100% PMS 554 background

100% PMS 554 logo 30% PMS 554 background

30% PMS 554 logo 100% PMS 554 background

Vertical logo The Corporate logo is the only logo used vertically reading top to bottom

Special Usage — Wallpaper | Tinted logos | Vertical Logo

ı KYDEX, LLC

10

II. Corporate ID | Logo

Incorrect Usage Do not use these, or any other noncompliant version

The logos should never be recreated or altered in any way.

of the KYDEX Corporate or Product logo, under any

Do not use or create the logo for email signatures.

circumstances.

Logos will be supplied upon request.

Do not distort logo in any way

Do not use logo in a headline or text

The The

Do not change logo colour

11

KYDEX, LLC

覺 Incorrect Usage

Do not remove any portion of logo

Company Sheet

Do not turn logo into an outline

Do not place logo on a pattern or colour of insufficient contrast

Logo | II. Corporate ID

Microban® Logo Usage Element sizes shown at 100% and based on 8.5" x 11" sheet.

See pages 15–16 for copyright and disclaimer information.

Width will change based on margins.

Product logo lockup and Microban® logo — front Logo placement for Market Guides and Ads y

.5"

Align top of standard size Product logo y Align base of Microban tagline with THERMOPLASTIC SHEET .25"

bottom margin Specs and Grids: Center rule within the gutter between the two right columns of the Advertising Grid (see page 29)

Microban logo placement — Product Information sheets

Clear space between logos = y 1 pt vertical rule 30% Black centered between logos Flush rule with the top of the logos and flush with the baseline of the Product logo

Size Microban® logo to fit within area indicated No closer than 3x above the KYDEX Corporate logo 3x x /2 x

Logo should be placed in the left column with Corporate logo and information.

1

ISO 9001:2000 | ISO 14001:2004 Certified

Customer Service 6685 Low St, Bloomsburg, PA 17815 USA Phone: 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 Fax: 800.452.0155, +1.570.387.7786 Email: info@kydex.com Technical Service Phone: 800.682.8758 ext. 581 Fax: +1.570.387.8722 Outside the US: +1.570.387.6997 ext. 581

www.kydex.com

ISO information: Formata Cond. 6 pt/9 pt, flush left

Service information: Formata Cond.

7 pt/11 pt + 4 pt space before Flush left

Contact Information: Formata Light Cond.

7 pt/9 pt -2 kerning Flush left

Web address: Formata Medium Cond.

8 pt/9 pt Flush left 100% PMS color of sheet

.5 pt vertical rule 25% Black

.5" left margin Microban Logo Usage

ı KYDEX, LLC

12

II. Corporate ID | Logo

Co-brand Logo Lockup Element sizes shown at 100% and based on 8.5” x 11” sheet.

Logo usage for Market Guides and co-branded

Width will change based on margins.

communications.

See pages 15–16 for copyright and disclaimer information.

Co-brand logo with Product logo lockup 1 pt horizontal rule 30% Black flush within borders of document .25" above logos

Align top of logos

.25"

bottom margin

Flush Co-Brand logo to left margin Height available for co-brand logo: align top of logos and flush to bottom margin

Flush standard size Product logo lockup to right margin

Co-brand logo with Product logo lockup and Microban® logo 1 pt horizontal rule 30% Black flush within borders of document .25" above logos

Align top of logos

.25"

bottom margin

Flush Co-Brand logo to left margin Height available for co-brand logo: align top of logos and flush to bottom margin

13

KYDEX, LLC

ı Co-brand Logo Lockup

Flush Product logo lockup and Microban logo to right margin

Legal | II. Corporate ID

Legal Use — Written Form KYDEX, LLC represents “the Company”.

KYDEX® represents “the Product”.

In written form, KYDEX, LLC:

In written form, KYDEX®:

– is always written in ALL CAPS

– is always written in ALL CAPS

– always reference corporate address/phone number

– always includes register mark “®”

– always use LLC in the first occurrence within a document

– is always followed by one of these qualifiers:

– subsequent references to the Company within text should use KYDEX without LLC

• sheet • thermoplastic sheet • product name (such as 6565)

To create registered trademark “®” symbol: – For PC: Type (r) – For Mac: Type option r

Legal Use — Written Form

ı

KYDEX, LLC 14

II. Corporate ID | Legal

Copyright, Trademark and Form Number Element sizes shown at 100% and based on 8.5" x 11" sheet.

Used for communications pieces that do not require

This information appears on the last page of all documents.

a disclaimer (Market Guides and Advertising).

Flush information opposite the logo lockup.

bottom margin

.125"

穢 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC. | FORM NUMBER

Copyright, Trademark and Form Number: Formata Light Cond. 6 pt/8 pt Add 2 spaces before and after | separating Copyright, Trademark and Form number Place .125" below bottom margin

15

KYDEX, LLC

覺 Copyright, Trademark and Form Number

Legal | II. Corporate ID

Disclaimer — General Element sizes shown at 100% and based on 8.5" x 11" sheet.

Width will change based on margins.

This information appears on the last page of all documents.

Corporate logo with disclaimer Last page and back cover for all communications pieces, unless indicated.

Disclaimer: Formata Light Cond. 6 pt/7 pt + 4 pt first paragraph, justified copy Flush in line with top of logo 1.375" x /2 x

.175"

1

ISO 9001:2000 | ISO 14001:2004 Certified

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 Fax: +1.570.387.8722 info@kydex.com

.25"

Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability of the accuracy of this information or the suitability of our products in any given situation. Users should conduct their own tests to determine the suitability of each product for their particular purposes. Data in the physical property table represents typical values and are to serve only as a guide for engineering design. Results are obtained from specimens under ideal laboratory conditions. Right to change physical properties as a result of technical progress is reserved. THE PRODUCTS DISCUSSED ARE SOLD WITHOUT WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, EITHER EXPRESSED OR IMPLIED, EXCEPT AS PROVIDED IN OUR STANDARD TERMS AND CONDITIONS OF SALE. Buyer assumes all responsibility for loss or damage arising from the handling and use of our products, whether done in accordance with directions or not. In no event shall the supplier or the manufacturer be liable for incidental or consequential damages. Also, statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent. Consult local code and regulatory agencies for specific requirements regarding code compliance, transporting, processing, recycling and disposal of our product. Product not intended for use as a heat resistant surface. Texture, product grade and other conditions may cause variations in appearance.

This information supersedes all previously published data.

www.kydex.com .25"

bottom margin 80% Corporate logo and information flush to left margin

.5 pt vertical rule 25% Black Flush with the top of logo and flush with base line of copyright information

ISO information: Formata Cond.

6 pt/9 pt + 2 pt space after Flush left

Contact information: Formata Light Cond.

8 pt/9 pt + 4 pt space after Flush left

Web address: Formata Medium Cond.

8 pt/9 pt Flush left

Disclaimer Last page and back cover for all communications pieces when a Combination logo lockup is used Disclaimer: Formata Light Cond. 6 pt/7 pt + 4 pt first paragraph, justified copy .25" Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability of the accuracy of this information or the suitability of our products in any given situation. Users should conduct their own tests to determine the suitability of each product for their particular purposes. Data in the physical property table represents typical values and are to serve only as a guide for engineering design. Results are obtained from specimens under ideal laboratory conditions. Right to change physical properties as a result of technical progress is reserved. THE PRODUCTS DISCUSSED ARE SOLD WITHOUT WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, EITHER EXPRESSED OR IMPLIED, EXCEPT AS PROVIDED IN OUR STANDARD TERMS AND CONDITIONS OF SALE. Buyer assumes all responsibility for loss or damage arising from the handling and use of our products, whether done in accordance with directions or not. In no event shall the supplier or the manufacturer be liable for incidental or consequential damages. Also, statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent. Consult local code and regulatory agencies for specific requirements regarding code compliance, transporting, processing, recycling and disposal of our product. Product not intended for use as a heat resistant surface. Texture, product grade and other conditions may cause variations in appearance.

This information supersedes all previously published data.

.25"

bottom margin

Disclaimer — General

ı KYDEX, LLC

16

II. Corporate ID | Legal

Disclaimer — Product Information Sheets Element sizes shown at 100% and based on 8.5" x 11" sheet.

Width will change based on margins.

This information appears on the last page of all Product Information sheets.

.5 pt vertical rule 25% Black Bottom location is consistent

ISO information: Formata Cond. 6 pt/9 pt, flush left 1.937" Service information: Formata Cond.

7 pt/11 pt + 4 pt space before Flush left

80% Standard size Corporate Logo Flush Corporate logo and information to left margin

x /2 x

1

Technical Service Phone: 800.682.8758 ext. 581 Fax: +1.570.387.8722 Outside the US: +1.570.387.6997 ext. 581

www.kydex.com

Web address: Formata Medium Cond.

8 pt/9 pt Flush left 100% PMS color of sheet

Disclaimer: Formata Light Cond. 6 pt/7 pt + 4 pt first paragraph,, justified copy Flush base with base of web address

ISO 9001:2000 | ISO 14001:2004 Certified

Customer Service 6685 Low St, Bloomsburg, PA 17815 USA Phone: 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 Fax: 800.452.0155, +1.570.387.7786 Email: info@kydex.com

Contact Information: Formata Light Cond.

7 pt/9 pt -2 kerning Flush left

.25" Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability of the accuracy of this information or the suitability of our products in any given situation. Users should conduct their own tests to determine the suitability of each product for their particular purposes. Data in the physical property table represents typical values and are to serve only as a guide for engineering design. Results are obtained from specimens under ideal laboratory conditions. Right to change physical properties as a result of technical progress is reserved. THE PRODUCTS DISCUSSED ARE SOLD WITHOUT WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, EITHER EXPRESSED OR IMPLIED, EXCEPT AS PROVIDED IN OUR STANDARD TERMS AND CONDITIONS OF SALE. Buyer assumes all responsibility for loss or damage arising from the handling and use of our products, whether done in accordance with directions or not. In no event shall the supplier or the manufacturer be liable for incidental or consequential damages. Also, statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent.

Consult local code and regulatory agencies for specific requirements regarding code compliance, transporting, processing, recycling and disposal of our product.

Product not intended for use as a heat resistant surface. Texture, product grade and other conditions may cause variations in appearance.

This information supersedes all previously published data.

.25"

bottom margin

.125"

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC. | FORM NUMBER

.1875"

.5"

Copyright, Trademark and Form Number: left margin

1 pt 100% color of Technical sheet Sits on bottom margin Length: left margin to right margin

17

KYDEX, LLC

ı Disclaimer — Product Information Sheets

Formata Light Cond. 6 pt/8 pt Add 2 spaces before and after | separating Copyright, Trademark and Form number Flush to right margin Place .125" below bottom margin

Colour Palette | II. Corporate ID

Colour Palette The KYDEX colour system is based on the Japanese

Colours match to traditional Japanese colours and groups

philosophy of the System of Five Elements. The KYDEX

as well as general western colour meanings.

attributes are represented in each element.

Corporate colours should be used as main colours and all other colours should be used as accent colours.

System of Five Elements Earth — Represents the hard, solid objects of the world Water — Represents the fluid, flowing, formless things in the world Fire — Represents the energetic, forceful, moving things in the world Wind — Represents things that grow, expand, and enjoy freedom of movement Sky/Void/Heaven — Represents those things beyond our everyday experience, particularly those things composed of pure energy

General Western Colour Meanings Corporate Colours

Accent Colours

Green Responsive Prosperity Ambition Prestige

Achromatic Dependability Reliability Intelligence Corporate

Yellow Intellect Imagination Action Courage

Yellow/Red Credibility Stability Industry

Yellow/Red Energy Reliability Creativity Warmth

Red Energy Strength Excitement

Violet Nobility Influence Spiritual Power

Blue/Violet Quality Trust Technology Wisdom

Green/Blue Sophisticated Movement

Yellow/Green Growth Calming Health Life

Pantone®

Pantone®

Pantone®

Pantone®

Pantone®

Pantone®

Pantone®

Pantone®

Pantone®

Pantone®

554

Cool Gray 9 1365

462

1575

200

258

2728

7473

368

CMYK C: 78 M:0 Y: 63 K: 67

CMYK C: 0 M:1 Y: 0 K: 51

CMYK C: 0 M: 29 Y: 72 K: 0

CMYK C: 50 M: 58 Y: 100 K: 45

CMYK C: 0 M:45 Y: 72 K: 0

CMYK C: 0 M:100 Y: 63 K: 12

CMYK C: 43 M:76 Y: 0 K: 0

CMYK C: 96 M:69 Y: 0 K: 0

CMYK C: 70 M:0 Y: 38 K: 8

CMYK C: 57 M:0 Y: 100 K: 0

RGB R: 31 G: 91 B: 66

RGB R: 116 G: 118 B: 121

RGB R: 255 G: 182 B: 82

RGB R: 89 G: 69 B: 42

RGB R: 255 G: 137 B: 71

RGB R: 190 G: 15 B: 52

RGB R: 149 G: 81 B: 158

RGB R: 0 G: 78 B: 188

RGB R: 13 G: 155 B: 140

RGB R: 102 G: 188 B: 41

HEX # 1f5b42

HEX # 747679

HEX # ffb652

HEX # 59452a

HEX # ff8947

HEX # be0f34

HEX # 95579e

HEX # 004ebc

HEX # 0d9b8c

HEX # 66bc29

Reference: http://en.wikipedia.org/wiki/Traditional_colors_of_Japan, www.temarikai.com/meaningoftraditionalcolors, www.sibagraphics.com, www.about.com, Journal of Marketing Communications

Colour Palette

ı KYDEX, LLC

18

II. Corporate ID | Colour Palette

Colour Usage — Product Information Sheets A key graphic component of Product Information sheets is the

See pages 25–26 for specs and grids, template is available.

use of the document classification colour bar. The colour bar is positioned at the top of a page identifying the sheet type.

There are seven Product Information sheets colours coded as follows:

General Forms

Technical Data Sheets

Technical Brief

Technical Article

Pantone® 554

Pantone® 1575

Pantone® 2728

Pantone® 258

Material Safety Data Sheets

Cross Reference Guide

Price Lists

Pantone 462

Pantone 200

Pantone® 7473

®

19

KYDEX, LLC

®

ı Colour Usage — Product Information Sheets

Typography | II. Corporate ID

Print Fonts The Formata fonts should be used for all printed materials.

Formata Fonts Formata Light

Formata Light Condensed

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz

Formata Light Italic

Formata Light Condensed Italic

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz

Formata Regular

Formata Condensed

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz

Formata Italic

Formata Condensed Italic

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz

Formata Medium

Formata Medium Condensed

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

Formata Medium Italic

Formata Medium Condensed Italic

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

Print Fonts

1234567890

1234567890

1234567890

1234567890

覺 KYDEX, LLC

20

II. Corporate ID | Typography

Online Fonts When working in PC formats, users may not have access to

The Tahoma font family should be used for:

the Formata fonts. Tahoma fonts should be substituted.

– PowerPoint® presentations – Online – Word documents – Other business documents

Tahoma Fonts Tahoma Regular

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

Tahoma (Select) Italic

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

Tahoma Bold

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

Tahoma Bold (Select) Italic

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890

21 KYDEX, LLC

ı Online Fonts

Stationary | II. Corporate ID

Business Cards 100% actual size.

No more than nine lines are allowed in the contact information — address, phone/fax numbers and email address.

.5 pt horizontal rule PMS 554

2" 1.875" 95% standard size Corporate logo PMS Cool Gray 9 and PMS 554

1

/2 x

ISO 9001:2000 | ISO 14001:2004 Certified

ISO information: Formata Cond. 6 pt/9pt Black Flush with left margin

Name Title

Street City, State ZIP Country Phone: 000.000.0000 Fax: 000.000.0000 Mobile: 000.000.0000 Email: name@kydex.com Additional line of information Customer Service: 800.325.3133 Outside the US: +1.570.389.5814

Contact information: Formata Light Cond.

8 pt/8.5 pt, Black + .031 pt space after address no more than 9 lines of information Align with top of ISO information Web address: Formata Medium Cond.

8 pt/8.5 pt, PMS 554 Align with title and bottom margin

www.kydex.com

1.875" .25"

Name: Formata Cond. 10 pt/9 pt, Black Flush with left margin Title: Formata Italic 7 pt/8 pt, PMS 554 Flush with left margin

.25"

1.875"

Minimum size Product logo PMS 554 and Black 1.875" .25"

.25"

Business Cards

Äą KYDEX, LLC

22

II. Corporate ID | Stationary

Letterhead and Envelopes

Letterhead 60% actual size 6.5"

.625"

Contact information: Formata Light Cond.

8 pt/9 pt, Black + .031 pt space after address + .062 pt space after phone numbers Align with top of ISO information

.5 pt horizontal rule PMS 554

x x ISO 9001:2000 | ISO 14001:2004 Certified

6685 Low Street Bloomsburg, PA 17815 USA Customer Service: +1.800.325.3133 Outside the US: +1.570.389.5814

ISO information: Formata Cond.

6 pt/9 pt Black Flush to left margin

120% standard size Corporate logo PMS Cool Gray 9 and PMS 554

www.kydex.com

Web address: Formata Medium Cond.

8 pt/9 pt, PMS 554

Envelope .25"

60% actual size

.25" x x 1

/2 x

.5 pt horizontal rule PMS 554 ISO 9001:2000 | ISO 14001:2004 Certified

6685 Low Street Bloomsburg, PA 17815 USA

Length of Corporate Logo

Address: Formata Light Cond.

8 pt/9 pt, Black Align with top of ISO information

Standard size Product logo Left align with Contact information Flush to bottom margin

.625"

.625"

23 KYDEX, LLC

覺 Letterhead and Envelopes

.625"

PowerPoint® | II. Corporate ID

PowerPoint PowerPoint presentation master slide templates are provided.

Format Requirements:

Cover - sample

– Tahoma font only – Every bullet point is followed by a leading capital letter – Use all capital letters when writing KYDEX, LLC; KYDEX® sheet; and KYDEX – Use supplied embossed logos only Format Recommendations: – Maximum of 6 bullet points per slide – Avoid full sentences – Limit verbiage to 8 words or less per bullet point – Avoid periods, question marks, and exclamation points – Avoid the use of “if, and, though, however, for example”

Page - sample

PowerPoint

ı KYDEX, LLC

24

III. Collateral

Product Information Sheets — All Pages 60% actual size 8.5" x 11" (see page 19 for specific sheet colours)

1 pt 100% color of sheet

Bar 4.75” x .35” cut right side to the left at a 45º angle

.5"

.5" 1.125"

Sheet type: Formata Cond. 18/18pt

Standard size Product logo Flush logo to right margin

1.625"

KYDEX® Product Header: Formata Cond. 18/18 pt 2.5"

Tables > text boxes 2 columns, add rows for additional sections Section head cell spec: Modify > text > multiple inset > right 14 pt Body copy Cell spec: Modify > text > multiple inset > left 14 pt

Connect .5 pt. rule to top of Product logo bar

Main header descriptor: Formata Cond. 11/14 pt

Section Header

Body copy: Formata Light Cond. 10/12 pt. space after 2 pt. Tracking -1. The copy and the headers have been set up in text cells in order to keep the copy structure and space between elements consistent. Cell spec: Modify > text > mutiple inset > left 14 pt. 25” between base of the last line of copy and top of the cell below.

Formata Cond.

13/14 pt

Body copy: Formata Light Cond. 10/12 pt. space after 2pt. Tracking -1. The copy and the headers have been set up in text cells in order to keep the copy structure and space between elements consistent. Cell spec: Modify > text > mutiple inset > left 14 pt. 25” between base of the last line of copy and top of the cell below.

Flush right

• Bullets in two column format - set up with tabs • Bullets in two column format - set up with tabs

Cell spec: right 14 pt

• Bullets: Formata Light Cond. 10/12 pt. space after 2pt. Tracking -1. The amount of information shown here will vary in length and may fall on two or more lines in length. The copy shown here is contained within its respective text cell. Cell spec: Modify > text > mutiple inset > left 14 pt.

• Bullets: Formata Light Cond. 10/12 pt. space after 2pt. Tracking -1. The amount of information shown here will vary in length and may fall on two or more lines in length. The copy shown here is contained within its respective text cell. Cell spec: Modify > text > mutiple inset > left 14 pt.

• Bullets: Formata Light Cond. 10/12 pt. space after 2pt. Tracking -1. The amount of information shown here will vary in length and may fall on two or more lines in length. The copy shown here is contained within its respective text cell. Cell spec: Modify > text > mutiple inset > left 14 pt. 25” between base of the last line of copy and top of the cell below.

.25"

• Bullets in two column format - set up with tabs • Bullets in two column format - set up with tabs

Subhead: Formata Cond. 11/12 pt, space above 4 pt, space after 2 pt To add more cells: highlight last cell, select Table > insert > row > below selection Delete rules, Modify text block *Footnote: Formata Light Condensed 7/8 pt.

Co-brand logo .5 pt vertical rule 25% Black

3x x ISO information: Formata Cond.

6 pt/9 pt, flush left

ISO 9001:2000 | ISO 14001:2004 Certified

Customer Service 6685 Low St, Bloomsburg, PA 17815 USA Phone: 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 Fax: 800.452.0155, +1.570.387.7786 Email: info@kydex.com Technical Service Phone: 800.682.8758 ext. 581 Fax: +1.570.387.8722 Outside the US: +1.570.387.6997 ext. 581

www.kydex.com

1 pt 100% color of sheet

80% Standard size Corporate logo Flush Corporate logo and information to left margin Service information: Formata Cond.

7 pt/11 pt + 4 pt space before Flush left

Contact information: Formata Light Cond.

7 pt/9 pt -2 kerning Flush left

Web address: Formata Medium Cond.

8 pt/9 pt Flush left 100% PMS color of sheet .25"

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC. | FORM NUMBER

1.9375"

Copyright, Trademark and Form Number:

Formata Light Cond. 6 pt/8 pt Add 2 spaces before and after | separating Copyright, Trademark and Form Number Flush to right margin, place .125" below bottom margin

25 KYDEX, LLC

ı Product Information Sheets— All Pages

.5" .5"

Specs and Grids | III. Collateral

Product Information Sheets — Last Page 60% actual size 8.5" x 11" (see page 19 for specific sheet colours) .5" .5"

Sheet type k/o copy: Formata Cond. 18/18pt Header contains the same information on all pages

KYDEX® Product Header: Formata Cond. 18/18 pt Main header descriptor: Formata Cond. 11/14 pt

Tables > text boxes set up is the same for all pages

Section Header

Body copy: Formata Light Cond. 10/12 pt. space after 2 pt. Tracking -1. The copy and the headers have been set up in text cells in order to keep the copy structure and space between elements consistent. Cell spec: Modify > text > mutiple inset > left 14 pt. 25” between base of the last line of copy and top of the cell below.

Formata Cond.

13/14 pt

Body copy: Formata Light Cond. 10/12 pt. space after 2pt. Tracking -1. The copy and the headers have been set up in text cells in order to keep the copy structure and space between elements consistent. Cell spec: Modify > text > mutiple inset > left 14 pt. 25” between base of the last line of copy and top of the cell below.

Flush right Cell spec: right 14 pt

Tables > text boxes Column chart header cell spec: Modify > vertical alignment centered Chart body copy cell spec: Modify > text > multiple inset > left 4 pt

• Bullets in two column format - set up with tabs • Bullets in two column format - set up with tabs Column chart header: Formata Cond.

.25"

• Bullets in two column format - set up with tabs • Bullets in two column format - set up with tabs 10/12 pt, centered

Modify: vertical alignment centered1

Chart body copy

Chart body copy

Formata Light Cond. 8/9 pt

Chart body copy

Chart body copy

center or flush left copy, depending on information

Chart body copy

Cell spec: Multiple inset > left 4 pt

Chart body copy

Chart body copy

Chart body copy

Grid and Frame .5 black

Chart body copy

Chart body copy

Chart body copy

Chart body copy

Chart body copy

Chart body copy

Chart body copy

Formata Light Cond. 8/9 pt

Chart body copy

center or flush left copy, depending on information

Chart body copy

Cell spec: Multiple inset > left 4 pt

Chart body copy

Chart body copy

Grid and Frame .5 black

Chart body copy

Chart body copy

Chart body copy

Chart body copy

Chart body copy

Chart body copy Chart body copy

Chart body copy

1 footnote

.5 pt vertical rule 25% Black

ISO 9001:2000 | ISO 14001:2004 Certified

Logo and ISO information, address, contact and web address appear on all sheets

Customer Service 6685 Low St, Bloomsburg, PA 17815 USA Phone: 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 Fax: 800.452.0155, +1.570.387.7786 Email: info@kydex.com Technical Service Phone: 800.682.8758 ext. 581 Fax: +1.570.387.8722 Outside the US: +1.570.387.6997 ext. 581

www.kydex.com

Disclaimer appears on last sheet only Formata Light Cond. 6 pt/7 pt + 4 pt first paragraph,, justified copy Flush base with base of web address

.25"

Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability of the accuracy of this information or the suitability of our products in any given situation. Users should conduct their own tests to determine the suitability of each product for their particular purposes. Data in the physical property table represents typical values and are to serve only as a guide for engineering design. Results are obtained from specimens under ideal laboratory conditions. Right to change physical properties as a result of technical progress is reserved. THE PRODUCTS DISCUSSED ARE SOLD WITHOUT WARRANTY OF MECHANTABILITY OR FITNESS FOR A PARTICULAR USE, EITHER EXPRESSED OR IMPLIED, EXCEPT AS PROVIDED IN OUR STANDARD TERMS AND CONDITIONS OF SALE. Buyer assumes all responsibility for loss or damage arising from the handling and use of our products, whether done in accordance with directions or not. In no event shall the supplier or the manufacturer be liable for incidental or consequential damages. Also, statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent. Consult local code and regulatory agencies for specific requirements regarding code compliance, transporting, processing, recycling and disposal of our product. Product not intended for use as a heat resistant surface. Texture, product grade and other conditions may cause variations in appearance.

This information supersedes all previously published data.

.25"

1 pt 100% color of sheet

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC. | FORM NUMBER

1.9375"

Copyright and trademark information appear on all sheets

.5" .5"

Product Information Sheets — Last Page

ı KYDEX, LLC

26

III. Collateral | Specs and Grids

Market Guides — Horizontal Combination Logo Lockup 60% actual size 8.5" x 11"

.25" Gutter

.625"

.25"

.25"

Column Live area for header and artwork. 6" is 6" the maximum live area that should be provided to leave sufficient room for body copy and logos

.5" ISO 9001:2000 | ISO 14001:2004 Certified

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 x542 Fax: +1.570.387.7786 info@kydex.com www.kydex.com

.25" .125"

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC.

.625"

.625"

27

KYDEX, LLC

ı Market Guides — Horizontal Combination Logo Lockup

.625"

Specs and Grids | III. Collateral

Market Guides — Vertical Combination Logo Lockup 60% actual size 8.5" x 11"

.25" Gutter

.625"

.25"

.25"

Column Live area for header and artwork. 6" is 6" the maximum live area that should be provided to leave sufficient room for body copy and logos.

.5"

ISO 9001:2000 | ISO 14001:2004 Certified

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 x542 Fax: +1.570.387.7786 info@kydex.com www.kydex.com

.25" .125"

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC.

.625"

.625"

.625"

Market Guides — Vertical Combination Logo Lockup

ı KYDEX, LLC

28

III. Collateral | Specs and Grids

Advertising 60% actual size 8.5" x 11"

.25" Gutter

.625"

.25"

.25"

Column Live area for header and artwork. 6" is 6" the maximum live area that should be provided to leave sufficient room for body copy and logos

.5"

.25" .125"

穢 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC.

.625"

.625"

29 KYDEX, LLC

覺 Advertising

.625"

Sample Layouts | III. Collateral

Market Guides Front

Back

Advertising KYDEX簧

Co-Brand

Market Guides | Advertising

覺 KYDEX, LLC

30

Thomas

I am KYDEX.

Jim Medalie

I am KYDEX.

Ronn Cort

I am KYDEX.

KYDEX速 thermoplastic sheet is now available lorem ipsum dolor sit amet, consectetuer adipiscing elit. Fusce id risus.

Maecenas tempor tincidunt velit. Phasellus cursus. Nulla ut neque at lacus placerat consectetuer. Quisque at orci.

Mauris viverra, dui ac pellentesque elementum, felis ipsum porta dui, a aliquet augue enim a mauris.

Aliquam vel magna. Sed eros mauris, volutpat non, luctus id, placerat a, lectus. Aliquam sit amet mi sed quam euismod gravida. Duis ultricies rhoncus nisl. Nam eu mazdwsgbvsdgsdef fea ssa.

KYDEX速 thermoplastic sheet is now available lorem ipsum dolor sit amet, consectetuer adipiscing elit.

Fusce id risus. Maecenas tempor tincidunt velit.

Phasellus cursus. Nulla ut neque at lacus placerat consectetuer. Quisque at orci. Mauris viverra.

KYDEX速 thermoplastic sheet is now available lorem ipsum dolor sit amet, consectetuer adipiscing elit.

Fusce id risus. Maecenas tempor tincidunt velit.

Phasellus cursus. Nulla ut neque at lacus placerat consectetuer. Quisque at orci. Mauris viverra.

KYDEX速 thermoplastic sheet is now available lorem ipsum dolor sit amet, consectetuer adipiscing elit.

Fusce id risus. Maecenas tempor tincidunt velit.

Phasellus cursus. Nulla ut neque at lacus placerat consectetuer. Quisque at orci. Mauris viverra.

Short lead times and low minimum orders.

Kydex_email_blaster_v2.qxd:Layout 1

2/19/09

2:29 PM

Page 1

Not yet registered for GlobalShop?

Register for

FREE NOW with KYDEX, LLC. KYDEX, LLC, manufacturer of KYDEXŽ 3D Laminates for 3D membrane pressing, flat lamination and mitre-fold applications, invite you to visit their booth at GlobalShop for FREE* until February 23rd! * Free registration through the provided link is only available until February 23, 2009. Registration with the provided link after the date will qualify you for registration at a discounted rate of $27—a savings of $25!

Booth #3437

Click here to register.

The

unspeakable words in design:

Cost & Compliance Let’s face it: No one likes to talk about cost and compliance.

But the fact is, they have a huge impact on what you can (or can’t) do in aircraft interior design.

Thankfully, there’s KYDEX® FST—a high performance, aviation grade thermoplastic sheet. Specially formulated to meet all of the critical FAA flame, smoke, and toxicity requirements, KYDEX® FST can be thermoformed to provide deep draw parts with crisp details, minimizing rejections due to unacceptable part quality. Plus, KYDEX® FST has Microban® antimicrobial protection built-in to the sheet so it won’t wash or wear away and lasts for the lifetime of the product.

In addition to KYDEX® FST, KYDEX® 5555 and KYDEX® 6565 were also developed specifically for aircraft applications.

KYDEX has the ability to offer small runs, short lead times, and custom colour matching making it the perfect solution for your aircraft interior needs.

So, KYDEX® thermoplastic sheet lets you design without worrying about you-know-what.

See the possibilities!

Visit KYDEX in Stand #9B12 Phone: +1.570.387.6997 x542 www.kydex.com © 2009 KYDEX, LLC. KYDEX® is a registered trademark of KYDEX, LLC.

KYD900_8.25x4.875_ad_v3:Layout 1

4/14/09

10:29 AM

Page 1

KYDEX 3D Laminates ®

The durable new generation of laminates HPLs are prone to chipping and cracking under impact.

Is using HPL just giving you the same old results, with a tendency for surfaces to chip, crack, and break? Now is the time to try the durable new generation of KYDEX® 3D Laminates.

For displays, counters, kiosks, and other commercial components, durable KYDEX® 3D Laminates are a great alternative to HPLs for creating components that are attractive PLUS long lasting.

Available in a choice of fire-rated grades ideal for heavy traffic applications, high-performance KYDEX® thermoplastic sheet can be used to create a wide variety of flat and 3D © 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC.

Integral colour means damage is less visible in KYDEX® sheet products.

components—providing superior definition and formability while surpassing HPLs in resisting surface and edge impact.

KYDEX® sheet is available in virtually unlimited colours, patterns and finishes for commercial applications. Short lead times and low minimums make KYDEX® thermoplastic sheet the right choice.

To learn more visit www.kydex.com.

KYDEX® sheet makes the part…

…that meets your exacting standards KYDEX® sheet is the preferred thermoplastic sheet among top thermoformers due to our ability to provide: • Highly durable, impact and chemical resistant parts • Low tooling costs • Extreme formability for creating complex shapes and contours • High rate of acceptable parts • Superior definition • Great hot tear strength • Experienced technical support And, KYDEX has low minimum order quantities and short lead times making us the total solution provider for all of your thermoforming needs.

To learn more about our products, speak with a KYDEX® sheet representative or visit www.kydex.com.

ISO 9001:2000 | ISO 14001:2004 Certified

6685 Low Street Bloomsburg, PA 17815 USA Phone: +1.570.387.6997 Fax: +1.570.387.8277 info@kydex.com www.kydex.com

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC.

Give your products a

Competitive Edge

KYDEX® sheet with Microban® Antimicrobial Protection When you use parts made from KYDEX® sheet with Microban® protection, your products take on a whole new competitive advantage—offering antimicrobial protection that helps to continuously fight the growth of odor- and stain-causing bacteria, mold, and mildew.

KYDEX® sheet with Microban protection is a highly durable thermoplastic alloy available in specialised grades for a wide range of demanding healthcare applications. Because the Microban protection is built in, it doesn’t wash or wear off, helping to keep products cleaner*. Plus, KYDEX is the only thermoplastic sheet available with Microban protection for use in medical device enclosures— offering a unique edge in that market.

(1)

(2)

In addition, KYDEX® sheet with Microban offers a wide range of advantages:

(1) Without Microban antimicrobial product protection

• Extremely durable and easily formed

• An almost unlimited choice of colours, textures, and patterns

(2) With Microban antimicrobial product protection

• Small runs and short lead times

This information is based upon standard laboratory tests and is provided for comparative purposes to substantiate antimicrobial activity for non-public health applications. Microban product protection inhibits the growth of microorganisms that can cause stains, odors and product degradation.

• Fire rated for worldwide regulatory compliance • Resistant to chemicals, disinfectants, and cleaning solutions

• Customisable yet cost effective

* Microban protection does not protect user against disease causing microorganisms and is not a substitute for normal cleaning practices.

Visit us at MD&M East – June 9-11, 2009 Booth #875 – Jacob Javits Center New York, NY 800.325.3133 • www.kydex.com • Outside the US: +1.570.389.5814

© 2009 KYDEX, LLC. All rights reserved. KYDEX is a registered trademark of KYDEX, LLC. MICROBAN is a registered trademark of Microban Products Company.

ISO 9001:2000 | ISO 14001:2004 Certified

800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 www.kydex.com

Š

Mass Transit

2

00 9K YD EX,

Applications

LLC . KY DEX is a

M OR |F LC. L , DEX registered trademark of KY

M BE R

Check our website for the latest documentation.

NU

ISO 9001:2000 | ISO 14001:2004 Certified

Phone: +1.570.387.6997 x542 Fax: +1.570.387.7786 info@kydex.com www.kydex.com

Š

2

00 9K YD EX,

Medical

Applications LLC . KY DEX is a

RM FO .| C L L , DEX registered trademark of KY

M BE R

Check our website for the latest documentation.

NU

Untitled Document

http://www.arftp.com/KYDEX_Korner/KYD697_email_v1.html

President's Message Lorem ipsum dolor sit amet, consectetur adipiscing elit. In ac purus.

Morbi sollicitudin.Curabitur auctor enim non metus. Etiam et purus et ipsum adipiscing varius. Etiam non ipsum eget metus ullamcorper pretium. Maecenas ultricies dignissim odio. Mauris non velit. Nulla facilisi. Curabitur iaculis pede sed quam. Donec faucibus commodo urna. Sed facilisis lacus eu diam. Cras ultrices cursus lorem. Proin laoreet, urna in varius pulvinar, est turpis vehicula nulla, ac vulputate ante pede eget velit. Vestibulum nec arcu ut massa condimentum vehicula.

What's New Lorem ipsum dolor sit amet, consectetur adipiscing elit. In ac purus.

Morbi sollicitudin.Curabitur auctor enim non metus. Etiam et purus et ipsum adipiscing varius. Etiam non ipsum eget metus ullamcorper pretium. Maecenas ultricies dignissim odio. Mauris non velit. Nulla facilisi. Curabitur iaculis pede sed quam. Donec faucibus commodo urna. Sed facilisis lacus eu diam. Cras ultrices cursus lorem. Proin laoreet, urna in varius pulvinar, est turpis vehicula nulla, ac vulputate ante pede eget velit. Vestibulum nec arcu ut massa condimentum vehicula.

Our Partners Lorem ipsum dolor sit amet, consectetur adipiscing elit. In ac purus.

Morbi sollicitudin.Curabitur auctor enim non metus. Etiam et purus et ipsum adipiscing varius. Etiam non ipsum eget metus ullamcorper pretium. Maecenas ultricies dignissim odio. Mauris non velit. Nulla facilisi. Curabitur iaculis pede sed quam. Donec faucibus commodo urna. Sed facilisis lacus eu diam. Cras ultrices cursus lorem. Proin laoreet, urna in varius pulvinar, est turpis vehicula nulla, ac vulputate ante pede eget velit. Vestibulum nec arcu ut massa condimentum vehicula.

Upcoming Events Lorem ipsum dolor sit amet, consectetur adipiscing elit. In ac purus.

Morbi sollicitudin.Curabitur auctor enim non metus. Etiam et purus et ipsum adipiscing varius. Etiam non ipsum eget metus ullamcorper pretium. Maecenas ultricies dignissim odio. Mauris non velit. Nulla facilisi. Curabitur iaculis pede sed quam. Donec faucibus commodo urna. Sed facilisis lacus eu diam. Cras ultrices cursus lorem. Proin laoreet, urna in varius pulvinar, est turpis vehicula nulla, ac vulputate ante pede eget velit. Vestibulum nec arcu ut massa condimentum vehicula.

1 of 1

1/7/09 5:31 PM

KYD255_Flight_Int_197mmx131mm_v2.qxd:Layout 1

The

unspeakable words in design:

2/17/09

2:05 PM

Page 1

Cost & Compliance Let’s face it: No one likes to talk about cost and compliance. But the fact is, they have a huge impact on what you can (or can’t) do in aircraft interior design.

Thankfully, there’s aviation grade KYDEX sheet—the cost-effective thermoplastic product specially formulated to meet critical FAA standards for fire, smoke, and toxicity compliance in aircraft interior components. ®

KYDEX® sheet is the essential ingredient in parts made to stand up to daily use and resist wear and tear. It’s also available with

Microban®, for built-in antimicrobial protection material that doesn’t wear off and helps to keep products cleaner.

And because aviation grade KYDEX® sheet can be produced in an almost endless array of custom colours, textures, and finishes— and with low minimum orders and short lead times—it’s also much more affordable than the competition.

So, KYDEX® thermoplastic sheet lets you design without worrying about you-know-what.

See the possibilities!

Visit KYDEX in Stand #5F65 Phone: +1.570.387.6997 x542 www.kydex.com © 2009 KYDEX, LLC. KYDEX® is a registered trademark of KYDEX, LLC.

KYD255_Aircraft_Interiors_230mmx300mm_v3.qxd:Layout 1

2/17/09

2:04 PM

Page 1

Two words designers hate to hear:

Cost & Compliance Let’s face it: No one likes to talk about cost and compliance. But the fact is, they have a huge impact on what you can (or can’t) do in aircraft interior design. ®

Thankfully, there’s aviation grade KYDEX sheet—the cost-effective thermoplastic product specially formulated to meet critical FAA standards for fire, smoke, and toxicity compliance in aircraft interior components. ®

KYDEX sheet is the essential ingredient in parts made to stand up to daily use and resist wear and tear. It’s also available with

Microban®, for built-in antimicrobial protection material that doesn’t wear off and helps to keep products cleaner.

And because aviation grade KYDEX® sheet can be produced in an almost endless array of custom colours, textures, and finishes—and with low minimum orders and short lead times— it’s also much more affordable than the competition.

So, KYDEX® thermoplastic sheet lets you design without worrying about you-know-what.

See the possibilities!

Visit KYDEX in Stand #5F65 Phone: +1.570.387.6997 x542 www.kydex.com

© 2009 KYDEX, LLC. KYDEX® is a registered trademark of KYDEX, LLC.

KYD_7.625x10_ad_v3.qxd:Layout 1

12/30/08

12:39 PM

Page 1

The Only Name You Need to Know

Kleerdex Company, LLC is now KYDEX, LLC From now on, whenever you need thermoplastic sheet products just ask for KYDEX and get it all: • • • •

The premier thermoplastic sheet, designed for durability and manufacturing flexibility Superior customer service from dedicated technical, sales, and support professionals A company recognized worldwide for excellence for more than 20 years The ability to fill virtually any order while maintaining cost-effectiveness

When it comes to making your product vision a reality, one name says it all.

For more information, contact your KYDEX sales representative — or, email info@kydex.com.

6685 Low Street | Bloomsburg, PA 17815 USA 800.325.3133 | Outside the US: +1.570.389.5814 www.kydex.com

KYD_7.625x10_ad_v3.qxd:Layout 1

12/30/08

12:39 PM

Page 2

The Only Name You Need to Know Kleerdex Company, LLC is now KYDEX, LLC From now on, whenever you need thermoplastic sheet products just ask for KYDEX and get it all: • • • •

The premier thermoplastic sheet, designed for durability and manufacturing flexibility Superior customer service from dedicated technical, sales, and support professionals A company recognized worldwide for excellence for more than 20 years The ability to fill virtually any order while maintaining cost-effectiveness

When it comes to making your product vision a reality, one name says it all.

For more information, contact your KYDEX sales representative — or, email info@kydex.com.

6685 Low Street | Bloomsburg, PA 17815 USA 800.325.3133 | Outside the US: +1.570.389.5814 www.kydex.com

The Only Name You Need to Know

January 2009 S M T W 4 11 18 25

5 12 19 26

6 13 20 27

July 2009 S M T

800.325.3133 Outside the US: +1.570.389.5814 www.kydex.com

5 12 19 26

6 13 20 27

7 14 21 28

7 14 21 28

T 1 8 15 22 29

F 2 9 16 23 30

S 3 10 17 24 31

W 1 8 15 22 29

T 2 9 16 23 30

F 3 10 17 24 31

S 4 11 18 25

February 2009 S M T W 1 2 3 4 8 9 10 11 15 16 17 18 22 23 24 25

T 5 12 19 26

F 6 13 20 27

S 7 14 21 28

August 2009 S M T W

T

F

6 13 20 27

7 14 21 28

S 1 8 15 22 29

2 9 16 23 30

3 10 17 24 31

4 11 18 25

5 12 19 26

March 2009 S M T W 1 2 3 4 8 9 10 11 15 16 17 18 22 23 24 25 29 30 31

T 5 12 19 26

F 6 13 20 27

S 7 14 21 28

September 2009 S M T W T 1 2 3 6 7 8 9 10 13 14 15 16 17 20 21 22 23 24 27 28 29 30

F 4 11 18 25

S 5 12 19 26

April 2009 S M T W 1 5 6 7 8 12 13 14 15 19 20 21 22 26 27 28 29

October 2009 S M T W 4 11 18 25

5 12 19 26

6 13 20 27

7 14 21 28

T 2 9 16 23 30

F 3 10 17 24

S 4 11 18 25

T 1 8 15 22 29

F 2 9 16 23 30

S 3 10 17 24 31

May 2009 S M T 3 10 17 24 31

4 11 18 25

5 12 18 26

W

T

6 13 20 27

7 14 21 28

November 2009 S M T W T 1 2 3 4 5 8 9 10 11 12 15 16 17 18 19 22 23 24 25 26 29 30

F 1 8 15 22 29

S 2 9 16 23 30

F 6 13 20 27

S 7 14 21 28

June 2009 S M T 1 2 7 8 9 14 15 16 21 22 23 28 29 30

W 3 10 17 24

T 4 11 18 25

F 5 12 19 26

S 6 13 20 27

December 2009 S M T W T 1 2 3 6 7 8 9 10 13 14 15 16 17 20 21 22 23 24 27 28 29 30 31

F 4 11 18 25

S 5 12 19 26

KLE768_8.5x11_cover_layout_v2:Layout 1

12/9/08

1:09 PM

Page 1

The Only Name You Need to Know.

Kydex, LLC • Bloomsburh, PA 2009 Planning & Budget Meeting December 11, 2008

THERMOPLASTIC SHEET

Durability By Design®

The same sheet in theory,

clearly different results.

Part formed with KYDEX® sheet

Part formed with competing sheet*

In side-by-side comparisons of two parts made the same way using KYDEX® sheet and other acrylic-PVC sheets with the same specifications, the end results are clearly different: KYDEX® high-performance thermoplastic sheet consistently forms better than other sheet products. Time and again, KYDEX® sheet produces the desired results — a reliably high quality product with fewer defects, less waste, and greater cost-effectiveness. In fact, KYDEX® sheet results in consistently higher yield sheet to part, which means increased customer satisfaction and less returned product .

To learn more about the superior formability of KYDEX® thermoplastic sheet, talk to a KYDEX® sheet representative or visit www.kydex.com.

THERMOPLASTIC SHEET

Durability By Design

®

Kleerdex Company, LLC ISO 9001and ISO 14001 Certified 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 * Sheets are the same texture, formulation, and starting wall thickness.

www.kydex.com

KYDEX 3D Laminates ®

The durable new generation of laminates

Is using HPL just giving you the same old results, with a tendency for surfaces to chip, crack, and break? Now is the time to try the durable new generation of KYDEX® 3D Laminates.

HPL’s are prone to chipping and cracking under impact.

For displays, counters, kiosks, and other commercial components, durable KYDEX® 3D Laminates are a great alternative to HPLs for creating components that are attractive PLUS long lasting.

Available in a choice of fire-rated grades ideal for heavy traffic applications, high-performance KYDEX® sheet can be used to create a wide variety of flat and three-dimensional components — providing superior definition and formability while surpassing HPLs in resisting surface and edge impact.

And with stock colours and designs on hand and ready for quick shipment — plus custom colours and designs ready to ship in as little as 2-3 weeks — KYDEX® 3D Laminates are a versatile solution for your commercial and retail needs.

Integral color means damage is less visible in KYDEX® sheet products.

THERMOPLASTIC SHEET

®

To learn more, talk to a KYDEX sheet representative or visit www.kydex.com.

Durability By Design®

Kleerdex Company, LLC ISO 9001and ISO 14001 Certified 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 www.kydex.com