QUITTING BUSINESS LIVE VIRTUAL AUCTION
GILBERTSON TOOL AND DIE DECEMBER 13, 2023
Starting at 9:00 AM CST 211 N Western Street • Lake Mills, Iowa 50450 One of the cleanest tool and die facilities in the state of Iowa!! Don’t miss this exceptional auction opportunity! 400 Lots Selling without reserve!! P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
Quitting Business Live Virtual Auction
Gilbertson Tool and Die
211 N Western Street, Lake Mills, Iowa 50450
December 13, 2023 Starting at 9:00 AM One of the cleanest tool and die facilities in the state of Iowa!! Don’t miss this exceptional auction opportunity! 400 Lots Selling without reserve!! Listen to a traditional auctioneer broadcasting over the internet. Visit www.equipmentmarketers.com for details. Auctioneers Note: Mr. Steve Gilbertson started his tool and die company in 1986. For 37 years Gilbertson Tool and Die has provided exceptional service to a midwestern clientele. Steve has decided to cease operations so he can spend more time on the golf course. The quality of service which Gilbertson Tool and Die provided was a result of having the proper machines within performance capacities. This auction welcomes your participation!! Inspection date: December 12, 2023, 8:00 AM to 5:00 PM or by appointment. Removal information: All items must be paid for in full before being removed. Removal dates for all items, except the machines requiring a machine rigger, are Dec. 15th, 16th, no loading on Sunday, 18th, 19th, 7:30AM -5:00 PM. Weather permitting, all items need to be removed by December 29. Machines needing a machine rigger are: Milltronics VMC, Hurco VMC, Okamato Surface grinder, Ikeda radial arm drill, Die Master OBI punch Press, Boice crane radial arm drill, Mitsubishi EDM, Gorbel bridge crane. Machinery rigger: BW Contractors, Inc. 7741 Waverly Rd, Cedar Falls, Iowa. 319 987 2070, The lots consisting of steel to be loaded by the buyer at buyers expense. A forklift will be available to assist in loading of general items. Shipping and Crating: Box lots are available for assistance of crating and shipping at a rate of 40.00 per hour plus materials and supplies. Contact Auction Company for Details. Buyer’s Premium of 15% applies to all purchases. Terms and Conditions: All items sell as is, where is, like is, without warranty or guarantee. All items must be paid in full before removal can be started. Payments are cash, wire transfer, approved company check. No credit cards accepted. All wire transfers must be completed by Friday, December 15. All bidders must register for this auction at www.bidspotter.com or www.proxibid.com. Please register 24 hours before the auction starts to be assured of bidding approval. https://www.proxibid.com/Equipment-Marketers-Appraisers-EMA/auction-house/3053 https://www.bidspotter.com/en-us/auction-catalogues/ema/catalogue-id-bsceq10041
Arranged and Conducted by:
Equipment Marketers and Appraisers 3826 Cedar Heights Drive, Suite 7 Cedar Falls IA 50613 www.equipmentmarketers.com office 319 266 3578 • mobile 319-415-9850
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
MACHINING CENTERS
Milltronics Vertical Machining Center Milltronics vertical machining center, model VM24, serial number 6496, 3 axis of control, standard table size 24” x 45”, standard table travel X 40”, saddle travel Y axis 24”, throat distance spindle to column 24”, head travel Z axis 24”, spindle to table top 4-1/4” up to 28-1/4”, maximum load rated 3,000 lbs. capacity, (5) T-slots, machine weight approximately 11,000 lbs., 15/10 hp, 6,000 RPM maximum, CT40 spindle, 20 tool automatic tool changer side mounted, spindle bearings have been replaced, updated control to the 8200 series. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
MACHINING CENTERS
Hurco Vertical Machining Center Hurco vertical machining center, model VF1, new in 2005, serial number HV11117, X axis 26”, Y axis 14”, Z axis 18”, table size 30”x14”, maximum table load capacity of 750 lbs., maximum spindle speed 8,000 RPM, spindle motor peak horsepower 15 HP, tool capacity 16, rapid traverse X & Y 750”/min., rapid Z traverse 500”/min., machine weight 6,200 lbs., Cat 40 spindle, 16 tool automatic tool changer side mounted, standard max touchscreen single screen color monitor, no chip conveyor, standard coolant, RS-232 port, purchased new one owner, very good appearance, very good condition, 3-axis control. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
WIRE EDM MACHINE
2002 Mitsubishi Wire EDM Machine 2002 Mitsubishi wire EDM machine, model FA10, serial number 51A1M180, X axis 13.7 inches, Y axis 9.8”, Z axis 8.6”, U,V axis control, 15º angle capacity, maximum work piece dimensions, 31.4”x23.6”x8.4”, maximum work piece weight 1,100 lbs., table dimensions, 23.2”x20.2” table, rapid feed speed, 51.1” maximum wire feed rate 590 in./min., automatic wire feed device, maximum work piece thickness 8.6”, start hole size .02”, overall dimensions 62”x65.6”x75.9”, weighs approximately 4,400 lbs., tank capacity approximately 116 gallons, pendant control, purchased new one owner. Location: 211 N. Western St., Lake Mills, Iowa. For removal preparation contact K Wetzel Technical Services, Kipp Wetzel, 612 979 7888.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
3R TOOLING
3R Tooling 3R tooling consisting of: 3R 292.66 and 3R-239.1 ruler vise, 3R 282 magnum leveling adapter, 3R-239.22 support tab, Black granite surface plate.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
VERTICAL MILL SERIES I
Bridgeport Vertical Mill Series I Bridgeport vertical mill series I, serial number 12BR248768, 9”x42” T-slotted table, Bridgeport power cross feed, 2 HP 3-phase 208/220 volt, 60-4,200 RPM variable speed, Kurt power drawbar, One Shot lube, lights, equipped with a Mitutoyo 2-axis programmable digital readout model kA-12 serial number 5214472, this machine was purchased new one owner, the table does not have drill or mill gouges or holes, has very good appearance. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
VERTICAL MILL
Lagun Vertical Mill Lagun vertical mill, model FTV-2, serial number SE-41806, 10”x54” T-slotted table, harden ways, Lagun power cross feed, variable speed 60-4,200 variable speed, has Sony Millman programmable 2-axis digital readout model LH51-2 serial number H512105276, One Shot lube, Kurt power drawbar, factory assembled coolant which has never been used, lights, purchased new, has an exceptionally good appearance. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
HYDRAULIC SURFACE GRINDER
Okamoto Automatic Hydraulic Surface Grinder Okamoto automatic hydraulic surface grinder, model ACC-124N, serial number 7586, maximum grinding 24”x12”, maximum vertical clearance with a 12” grinding wheel 13.7”, maximum weight of work piece 930 lbs, table surface length 23.75”, surface width 11.80”, maximum longitudinal travel 29.5”, maximum cross travel 13.6”, (3) T-slots, longitudinal movement of table hydraulic feed 1.0-100 ft./min., hand feed per revolution 1.85”, cross movement of saddle hydraulic intermittent feed 0.02-0.8”, hydraulic continuous feed 4-40 in./min., 12” diameter grinding wheel, RPM varies 1,500-1,800, 5 HP wheel spindle, 2 HP hydraulic pump, 1/2 HP vertical rapid feeder, requires a floor space of 103”x74”x73” and approximate weight of 5,000 lbs., this machine was purchased new, one owner, coolant, Minatron-II magnetic chuck control with push button controls, very good appearance, also has Kanetec magnetic separator mounted on top of the coolant reservoir pan. has incremental downfeed and manual stone dressing, full hydraulic table and saddle. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
SURFACE GRINDER
Clausing Equiptop Semi-Aautomatic Surface Grinder Clausing Equiptop semi-automatic surface grinder, mode CSG-618, new in 2004, serial number 1104821, table size 6”x18”, maximum grinding length longitudinal 19”, maximum grinding width 7”, maximum distance from table surface to spindle center line 18”, standard magnetic chuck size 6”x18”, longitudinal movement of table maximum travel manual 20”, cross travel maximum manual traverse travel 7-3/4”, hand wheel per revolution .2”, hand wheel per graduation .001, 2 HP, grinding wheel 8” diameter, floor space 71”x45”x65”, weight approximately 1,800 lbs., approximate rated horsepower is 2 HP, purchased new one owner, manual up/down spindle adjustment, manual stone dresser, equipped with coolant. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
RADIAL ARM DRILL
1991 Ikeda Radial Arm Drill 1991 Ikeda radial arm drill, model 1575, serial number 91081, 13 inch column, 60 1/2 inch maximum distance spindle to column, minimum distance spindle to column 10 inches, maximum distance spindle to base 54 1/2”, minimum distance spindle to base 12 1/2”, travel of spindle, 13 5/8”, number 5 Morse taper, 48” of head stock travel, 25 up to 1500 RPM, power down feed, power elevation, power column lock, T-slot box table, weighs approximately 8800 pounds, new in 1991.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
RADIAL ARM DRILL
Boice Crane Radial Arm Drill Boice Crane radial arm drill model 830, serial number 016-8502, 220 V three phase, manual column lock, power down feed, 185-1483 RPM, 7 1/2” column, 36 “ arm, box table mounted on 8 inch I-beam risers.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
VERTICAL BAND SAW
Grob Inc. Vertical Band Saw Grob Inc. vertical band saw, model 4V-18, serial number 5677, equipped with a blade butt welder model RW-A serial number 17209, 230/460 volt, 3-phase, 2-speed motor control, 18” throat, has the pneumatic feed attachment, tilting table, work fence, pneumatic feed option, the idler and drive rubber lining is very good condition, currently has a 1/2” blade, can handle a 1/4” blade, purchased new, has very good appearance, 24”x28” table size, very good condition. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
WORKSTATION BRIDGE CRANE & HYDRAULIC PRESS
Gorbel Freestanding, Workstation Bridge Crane
Simplex H-Frame Hydraulic Press
Gorbel freestanding, workstation bridge crane, model, GLCSL - FS Dash 2000–15AL 26–10.6729, 2000 pound capacity bridge and runway system, 15 foot aluminum bridge length, 26 foot steel runway length, one aluminum bridge, support center is 23 foot, 10.67’ trolley saddle height, 13‘ 5” overall height, 27 foot overall length, 16.667 feet overall width, approximate shipping weighs 3000 pounds. (1) Coffing electric chain hoist model, ELC02016–3, 2000-pound capacity, 10-foot lift, 16 ft./min. lift speed, chain container, pendant control, this system was purchased new, very good appearance.
Simplex H-frame hydraulic press, 55 ton capacity, model IES5513, single acting 13” stroke, 36” between the uprights, 15-1/2” left to right of center, manual raise/lower of bed, 3” diameter cylinder, 13” stroke, electric over hydraulic power pack model PEM2032, 2-gallon reservoir capacity serial number V28C4, 2-stage, this press was purchased new, has near new appearance, advance speed 35 in./min., pressing speed 2 in./min., weighs approximately 800 lbs. Location: 211 N. Western St., Lake Mills, Iowa.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
DRY BLAST SYSTEM & PUNCH PRESS
Skat Blast Dry Blast System Skat blast dry blast system, unable to determine model or serial number, inside dimension 24 inches front back 33 inches left to right the height is varied upwards of 25 inches, includes a dust collector, foot control, blast gloves are in good condition.
Bench Master Die Master OBI Punch Press Bench Master Die Master OBI PUNCH PRESS, 85 ton capacity, MODEL, 85P – 25F – 17–4, SERIAL NUMBER 51892, air clutch and brake, flywheel type, approximately has a 4 INCH STROKE, 13 inch minimum shut height, 17 inch maximum shut height, 2 1/2 inch bolster thickness bolster measures 36“ x 24“ with a 6“ x 8“ bolster hole, bolster does have drilled and tap holes, original paint, and decal.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
PUNCH PRESS & GRINDER
Double Crank Wide Bed Punch Press
Double Spindle Grinder
Rousselle model 4W Gap Frame double crank WIDE BED Punch press, serial number, 41651, 14“ x 48“ holster plate, 7“ x 10“ hole in the bolster plate, manual vertical adjustment of the bed approximately 9 inches, air clutch and brake, Rockford, safety equipment, palm buttons, fly wheel type, approximately 4 inch stroke, the ram does not have adjustment, by being able to adjust the bed, provides the desired shut height.
Baldor model, 1022W double spindle grinder, serial number P299, one horsepower, single phase, 115/230 V, 10-inch wheel capacity, no safety equipment, mounted on Baldor base.
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
DRILL PRESS & COMPRESSOR
Wilton Floor Model Geared Head Drill Press Wilton floor model geared head drill press, model 24200, serial number 37127, 220 V, 3 phase, 1.3/1.6 hp, (8) rpm speeds, 85, 325, 650, 1765, 170, 505, 1010, 3530, power down feed, T slotted table 20”x 25”, is directly wired into the electrical system.
Quincy, Qt 15 Air Compressor Quincy, QT 15 air compressor, (2)V pistons, mounted on 80 gallon horizontal tank, 10 hp three phase, includes Support stand
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850
OVERVIEW
P.O. BOX 369 • CEDAR FALLS, IA 50613 • 319.266.3578 or 319.415.9850