EMS Electrolyte Management System ELECTROLYTE MANAGEMENT SYSTEM (EMS) Both systems with chamber filter presses and with microfiltration are available for filtration purposes. This allows the filtrate quality and volume to be customized specifically to your requirements. Systems with a filtration capacity of between 40 and 600 l/min are available, standard. Monitoring conductivity, temperature, pressure, flow rate and pH value allow for high reproducibility of machining results. Sludge can either be discharged manually or automatically depending on the discharge volume and will be designed to perfectly fit your production process. With the modular concept of the EMAG ECM machines, you are able to supply multiple ECM machines with electrolyte using a single EMS.
EMAG ECM GmbH Am Flugplatz 1 I 73540 Heubach I Germany Phone: +49 (0) 7173 / 9188-0 I E-mail: ecm@emag.com www.emag.com
EMS HIGHLIGHTS: + Electrolyte NaNO3 or NaCl + Flow rates of up to 600 l/min + Electrolyte pressure of up to 20 bar + Temperature control + Flow rate or pressure control + pH value control by means of
metered acid / alkaline addition
+ Conductivity monitor + Particle size: < 0.5 μm
EMS 150
+ Visualization and setting of all 2.942 mm
electrolyte parameters on a SIEMENS touchscreen panel
4.165 mm
3.410 mm
7.550 mm
2.797 mm
EMS 35
2.400 mm
4.220 mm
Data subject to change. The layout may change to fit technical requirement. All systems are built to current CE standards.