EMAG Spindelfix Workholding equipment changes made simpler and faster
EMAG Spindelfix Workholding equipment changes made simpler and faster
With EMAG Spindelfix there is no longer any need for the laborious locking process to prevent rotation of the main spindle when the machine is switched off. EMAG Spindelfix ensures much faster and more effective locking of the spindle. In fact, the automatic spindle locking device prevents the workholding unit from turning when the machine guards are open and reduces set-up times by allowing for a fast and simple change of chuck jaws, bar stops and complete chucks. Services and prices for standard workholding units Machine type EMAG
EMAG Spindelfix (fitting and commissioning) per spindle
Data back-up per machine
VSC 130 / 160 / 200
EUR 5,875
EUR 275
VSC 250
EUR 6,128
EUR 275
VSC 315
EUR 6,343
EUR 275
VSC 400
EUR 6,883
EUR 275
Other machine types on request. Special workholding units are subject to separate qu Above prices valid only for orders received by 31.12.2012.
The offer for retrofits When the machine guard is open, ready for the workholding unit to be changed, pressing a button on the EMAG Spindelfix element mechanically locks the main spindle and activates limit switches that monitor the process. Once the front guard is closed and the Automatic cycle activated, the locking mechanism automatically unlocks the main spindle again.
Travel and overnight stay
at cost at cost at cost at cost
uotations.
With EMAG SPINDELFIX you save between 30 % and 40 % on normal set-up times. Taking an average of 3 set-ups per day and an average set-up time of 30 minutes and an average hourly rate of EUR 75, this will save you: • EUR 9,000 for 120 hours a year • EUR 750 for 10 hours a month • EUR 187 for 2.5 hours a week
EMAG Spindelfix Workholding equipment changes made simpler and faster
Your contact EMAG Serviceplus phone: +49 7162 17-4300
EMAG Gruppen-Vertriebs- und Service GmbH Austrasse 24 | 73084 Salach Germany www.spindelďŹ x.de