Single Point Liquid Sampler

316L Stainless Steel Liquid Bottle Samplers

The Liquid Bottle Samplers are the perfect tool for taking liquid samples straight into the bottle. The spring-loaded mechanism means that the bottle remains closed in the liquid until you squeeze the handle. This means it is ideal for targeted point sampling.

Features

• Ideal for sampling low to medium viscosity liquids

• Manufactured from 316L Stainless Steel

• Bottle manufactured from soda-lime glass – USP Type III - Clear

• Spring manufactured from stainless steel (not a product contact part)

• Crevice free, all welds ground and polished

• External surface finish 0.5 μm Ra

• Supplied with a 500 ml clear glass bottle with lid

• Optional cover available that protects the glass bottle and helps keep the bottle dry during sampling

• Easy to clean

Take liquid samples from a known point

316L Stainless Steel Fluid Point Samplers

Operation

1. Push the sampler into the liquid.

2. At the required depth squeeze the handle to open the lid allowing the sample to be drawn into the sampler.

3. Close the lid by un-squeezing the handle.

4. Remove sampler.

The Fluid Point Samplers are mainly used for sampling pharmaceuticals, cosmetics and food products. In order to check that the material being sampled is homogeneous. The design allows rapid point sampling from drums, kegs and most containers.

Features

• Ideal for sampling low viscosity liquids and suspensions

• Manufactured from 316L Stainless Steel

• O-ring seal is made from silicone (FDA grade CFR 177.2600)

• Easy to clean

1. Insert the sampler into your liquid.

2. At the required depth pull the handle allowing the sample to be drawn into the sampler.

3. Withdraw sampler.

4. Push down handle to expel the sample.